]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/dave/PPChameleonEVB/PPChameleonEVB.c
Update default environment for INKA4x00 board.
[karo-tx-uboot.git] / board / dave / PPChameleonEVB / PPChameleonEVB.c
1 /*
2  * (C) Copyright 2003
3  * DAVE Srl
4  * http://www.dave-tech.it
5  * http://www.wawnet.biz
6  * mailto:info@wawnet.biz
7  *
8  * See file CREDITS for list of people who contributed to this
9  * project.
10  *
11  * This program is free software; you can redistribute it and/or
12  * modify it under the terms of the GNU General Public License as
13  * published by the Free Software Foundation; either version 2 of
14  * the License, or (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24  * MA 02111-1307 USA
25  */
26
27 #include <common.h>
28 #include <asm/processor.h>
29 #include <command.h>
30 #include <malloc.h>
31
32 /* ------------------------------------------------------------------------- */
33
34 /* Prototypes */
35 int gunzip(void *, int, unsigned char *, unsigned long *);
36
37 int board_early_init_f (void)
38 {
39         out32(GPIO0_OR, CFG_NAND0_CE);                 /* set initial outputs     */
40         out32(GPIO0_OR, CFG_NAND1_CE);                 /* set initial outputs     */
41
42         /*
43          * IRQ 0-15  405GP internally generated; active high; level sensitive
44          * IRQ 16    405GP internally generated; active low; level sensitive
45          * IRQ 17-24 RESERVED
46          * IRQ 25 (EXT IRQ 0)
47          * IRQ 26 (EXT IRQ 1)
48          * IRQ 27 (EXT IRQ 2)
49          * IRQ 28 (EXT IRQ 3)
50          * IRQ 29 (EXT IRQ 4)
51          * IRQ 30 (EXT IRQ 5)
52          * IRQ 31 (EXT IRQ 6)
53          */
54         mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
55         mtdcr(uicer, 0x00000000);       /* disable all ints */
56         mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
57         mtdcr(uicpr, 0xFFFFFF80);       /* set int polarities */
58         mtdcr(uictr, 0x10000000);       /* set int trigger levels */
59         mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
60         mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
61
62         /*
63          * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
64          */
65 #if 1 /* test-only */
66         mtebc (epcr, 0xa8400000); /* ebc always driven */
67 #else
68         mtebc (epcr, 0x28400000); /* ebc in high-z */
69 #endif
70         return 0;
71 }
72
73 /* ------------------------------------------------------------------------- */
74
75 int misc_init_f (void)
76 {
77         return 0;  /* dummy implementation */
78 }
79
80 extern flash_info_t flash_info[];       /* info for FLASH chips */
81
82 int misc_init_r (void)
83 {
84         DECLARE_GLOBAL_DATA_PTR;
85
86         /* adjust flash start and size as well as the offset */
87         gd->bd->bi_flashstart = 0 - flash_info[0].size;
88         gd->bd->bi_flashoffset= flash_info[0].size - CFG_MONITOR_LEN;
89 #if 0
90         volatile unsigned short *fpga_mode =
91                 (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
92         volatile unsigned char *duart0_mcr =
93                 (unsigned char *)((ulong)DUART0_BA + 4);
94         volatile unsigned char *duart1_mcr =
95                 (unsigned char *)((ulong)DUART1_BA + 4);
96
97         bd_t *bd = gd->bd;
98         char *  tmp;                    /* Temporary char pointer      */
99         unsigned char *dst;
100         ulong len = sizeof(fpgadata);
101         int status;
102         int index;
103         int i;
104         unsigned long cntrl0Reg;
105
106         dst = malloc(CFG_FPGA_MAX_SIZE);
107         if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
108                 printf ("GUNZIP ERROR - must RESET board to recover\n");
109                 do_reset (NULL, 0, 0, NULL);
110         }
111
112         status = fpga_boot(dst, len);
113         if (status != 0) {
114                 printf("\nFPGA: Booting failed ");
115                 switch (status) {
116                 case ERROR_FPGA_PRG_INIT_LOW:
117                         printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
118                         break;
119                 case ERROR_FPGA_PRG_INIT_HIGH:
120                         printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
121                         break;
122                 case ERROR_FPGA_PRG_DONE:
123                         printf("(Timeout: DONE not high after programming FPGA)\n ");
124                         break;
125                 }
126
127                 /* display infos on fpgaimage */
128                 index = 15;
129                 for (i=0; i<4; i++) {
130                         len = dst[index];
131                         printf("FPGA: %s\n", &(dst[index+1]));
132                         index += len+3;
133                 }
134                 putc ('\n');
135                 /* delayed reboot */
136                 for (i=20; i>0; i--) {
137                         printf("Rebooting in %2d seconds \r",i);
138                         for (index=0;index<1000;index++)
139                                 udelay(1000);
140                 }
141                 putc ('\n');
142                 do_reset(NULL, 0, 0, NULL);
143         }
144
145         puts("FPGA:  ");
146
147         /* display infos on fpgaimage */
148         index = 15;
149         for (i=0; i<4; i++) {
150                 len = dst[index];
151                 printf("%s ", &(dst[index+1]));
152                 index += len+3;
153         }
154         putc ('\n');
155
156         free(dst);
157
158         /*
159          * Reset FPGA via FPGA_DATA pin
160          */
161         SET_FPGA(FPGA_PRG | FPGA_CLK);
162         udelay(1000); /* wait 1ms */
163         SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
164         udelay(1000); /* wait 1ms */
165 #endif
166
167 #if 0
168         /*
169          * Enable power on PS/2 interface
170          */
171         *fpga_mode |= CFG_FPGA_CTRL_PS2_RESET;
172
173         /*
174          * Enable interrupts in exar duart mcr[3]
175          */
176         *duart0_mcr = 0x08;
177         *duart1_mcr = 0x08;
178 #endif
179         return (0);
180 }
181
182 /*
183  * Check Board Identity:
184  */
185
186 int checkboard (void)
187 {
188         char str[64];
189         int i = getenv_r ("serial#", str, sizeof(str));
190
191         puts ("Board: ");
192
193         if (i == -1) {
194                 puts ("### No HW ID - assuming PPChameleonEVB");
195         } else {
196                 puts(str);
197         }
198
199         putc ('\n');
200
201         return 0;
202 }
203
204 /* ------------------------------------------------------------------------- */
205
206 long int initdram (int board_type)
207 {
208         unsigned long val;
209
210         mtdcr(memcfga, mem_mb0cf);
211         val = mfdcr(memcfgd);
212
213 #if 0 /* test-only */
214         for (;;) {
215                 NAND_DISABLE_CE(1);
216                 udelay(100);
217                 NAND_ENABLE_CE(1);
218                 udelay(100);
219         }
220 #endif
221 #if 0
222         printf("\nmb0cf=%x\n", val); /* test-only */
223         printf("strap=%x\n", mfdcr(strap)); /* test-only */
224 #endif
225
226         return (4*1024*1024 << ((val & 0x000e0000) >> 17));
227 }
228
229 /* ------------------------------------------------------------------------- */
230
231 int testdram (void)
232 {
233         /* TODO: XXX XXX XXX */
234         printf ("test: 16 MB - ok\n");
235
236         return (0);
237 }
238
239 /* ------------------------------------------------------------------------- */
240
241 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
242 extern ulong
243 nand_probe(ulong physadr);
244
245 void
246 nand_init(void)
247 {
248         ulong totlen = 0;
249
250 /*
251         The HI model is equipped with a large block NAND chip not supported yet
252         by U-Boot
253     (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_HI)
254 */
255
256 #if (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME)
257         debug ("Probing at 0x%.8x\n", CFG_NAND0_BASE);
258         totlen += nand_probe (CFG_NAND0_BASE);
259 #endif  /* CONFIG_PPCHAMELEON_MODULE_ME, CONFIG_PPCHAMELEON_MODULE_HI */
260
261         debug ("Probing at 0x%.8x\n", CFG_NAND1_BASE);
262         totlen += nand_probe (CFG_NAND1_BASE);
263
264         printf ("%3lu MB\n", totlen >>20);
265 }
266 #endif
267
268 #ifdef CONFIG_CFB_CONSOLE
269 # ifdef CONFIG_CONSOLE_EXTRA_INFO
270 # include <video_fb.h>
271 extern GraphicDevice smi;
272
273 void video_get_info_str (int line_number, char *info)
274 {
275         uint pvr = get_pvr ();
276
277         /* init video info strings for graphic console */
278         switch (line_number) {
279         case 1:
280                 switch (pvr) {
281                 case PVR_405EP_RB:
282                         sprintf (info, " AMCC PowerPC 405EP Rev. B");
283                         break;
284                 default:
285                         sprintf (info, " AMCC PowerPC 405EP Rev. <unknown>");
286                         break;
287                 }
288                 return;
289         case 2:
290                 sprintf (info, " DAVE Srl PPChameleonEVB - www.dave-tech.it");
291                 return;
292         case 3:
293                 sprintf (info, " %s", smi.modeIdent);
294                 return;
295         }
296
297         /* no more info lines */
298         *info = 0;
299         return;
300 }
301 # endif /* CONFIG_CONSOLE_EXTRA_INFO */
302 #endif  /* CONFIG_CFB_CONSOLE */