board/eNET/eNET.c

   1 /*
   2  * (C) Copyright 2008
   3  * Graeme Russ, graeme.russ@gmail.com.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 #include <common.h>
  25 #include <asm/io.h>
  26 #include <asm/arch/sc520.h>
  27 #include <net.h>
  28 #include <netdev.h>
  29
  30 #ifdef CONFIG_HW_WATCHDOG
  31 #include <watchdog.h>
  32 #endif
  33
  34 #include "hardware.h"
  35
  36 DECLARE_GLOBAL_DATA_PTR;
  37
  38 unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
  39
  40 static void enet_timer_isr(void);
  41 static void enet_toggle_run_led(void);
  42 static void enet_setup_pars(void);
  43
  44 /*
  45  * Miscellaneous platform dependent initializations
  46  */
  47 int board_early_init_f(void)
  48 {
  49         u16 pio_out_cfg = 0x0000;
  50
  51         /* Configure General Purpose Bus timing */
  52         writeb(CONFIG_SYS_SC520_GPCSRT, &sc520_mmcr->gpcsrt);
  53         writeb(CONFIG_SYS_SC520_GPCSPW, &sc520_mmcr->gpcspw);
  54         writeb(CONFIG_SYS_SC520_GPCSOFF, &sc520_mmcr->gpcsoff);
  55         writeb(CONFIG_SYS_SC520_GPRDW, &sc520_mmcr->gprdw);
  56         writeb(CONFIG_SYS_SC520_GPRDOFF, &sc520_mmcr->gprdoff);
  57         writeb(CONFIG_SYS_SC520_GPWRW, &sc520_mmcr->gpwrw);
  58         writeb(CONFIG_SYS_SC520_GPWROFF, &sc520_mmcr->gpwroff);
  59
  60         /* Configure Programmable Input/Output Pins */
  61         writew(CONFIG_SYS_SC520_PIODIR15_0, &sc520_mmcr->piodir15_0);
  62         writew(CONFIG_SYS_SC520_PIODIR31_16, &sc520_mmcr->piodir31_16);
  63         writew(CONFIG_SYS_SC520_PIOPFS31_16, &sc520_mmcr->piopfs31_16);
  64         writew(CONFIG_SYS_SC520_PIOPFS15_0, &sc520_mmcr->piopfs15_0);
  65         writeb(CONFIG_SYS_SC520_CSPFS, &sc520_mmcr->cspfs);
  66         writeb(CONFIG_SYS_SC520_CLKSEL, &sc520_mmcr->clksel);
  67
  68         /*
  69          * Turn off top board
  70          * Set StrataFlash chips to 16-bit width
  71          * Set StrataFlash chips to normal (non reset/power down) mode
  72          */
  73         pio_out_cfg |= CONFIG_SYS_ENET_TOP_BRD_PWR;
  74         pio_out_cfg |= CONFIG_SYS_ENET_SF_WIDTH;
  75         pio_out_cfg |= CONFIG_SYS_ENET_SF1_MODE;
  76         pio_out_cfg |= CONFIG_SYS_ENET_SF2_MODE;
  77         writew(pio_out_cfg, &sc520_mmcr->pioset15_0);
  78
  79         /* Turn off auxiliary power output */
  80         writew(CONFIG_SYS_ENET_AUX_PWR, &sc520_mmcr->pioclr15_0);
  81
  82         /* Clear FPGA program mode */
  83         writew(CONFIG_SYS_ENET_FPGA_PROG, &sc520_mmcr->pioset31_16);
  84
  85         enet_setup_pars();
  86
  87         /* Disable Watchdog */
  88         writew(0x3333, &sc520_mmcr->wdtmrctl);
  89         writew(0xcccc, &sc520_mmcr->wdtmrctl);
  90         writew(0x0000, &sc520_mmcr->wdtmrctl);
  91
  92         /* Chip Select Configuration */
  93         writew(CONFIG_SYS_SC520_BOOTCS_CTRL, &sc520_mmcr->bootcsctl);
  94         writew(CONFIG_SYS_SC520_ROMCS1_CTRL, &sc520_mmcr->romcs1ctl);
  95         writew(CONFIG_SYS_SC520_ROMCS2_CTRL, &sc520_mmcr->romcs2ctl);
  96
  97         writeb(CONFIG_SYS_SC520_ADDDECCTL, &sc520_mmcr->adddecctl);
  98         writeb(CONFIG_SYS_SC520_UART1CTL, &sc520_mmcr->uart1ctl);
  99         writeb(CONFIG_SYS_SC520_UART2CTL, &sc520_mmcr->uart2ctl);
 100
 101         writeb(CONFIG_SYS_SC520_SYSARBCTL, &sc520_mmcr->sysarbctl);
 102         writew(CONFIG_SYS_SC520_SYSARBMENB, &sc520_mmcr->sysarbmenb);
 103
 104         /* enable posted-writes */
 105         writeb(CONFIG_SYS_SC520_HBCTL, &sc520_mmcr->hbctl);
 106
 107         return 0;
 108 }
 109
 110 static void enet_setup_pars(void)
 111 {
 112         /*
 113          * PARs 11 and 12 are 2MB SRAM @ 0x19000000
 114          *
 115          * These are setup now because older version of U-Boot have them
 116          * mapped to a different PAR which gets clobbered which prevents
 117          * using SRAM for warm-booting a new image
 118          */
 119         writel(CONFIG_SYS_SC520_SRAM1_PAR, &sc520_mmcr->par[11]);
 120         writel(CONFIG_SYS_SC520_SRAM2_PAR, &sc520_mmcr->par[12]);
 121
 122         /* PARs 0 and 1 are Compact Flash slots (4kB each) */
 123         writel(CONFIG_SYS_SC520_CF1_PAR, &sc520_mmcr->par[0]);
 124         writel(CONFIG_SYS_SC520_CF2_PAR, &sc520_mmcr->par[1]);
 125
 126         /* PAR 2 is used for Cache-As-RAM */
 127
 128         /*
 129          * PARs 5 through 8 are additional NS16550 UARTS
 130          * 8 bytes each @ 0x013f8, 0x012f8, 0x011f8 and 0x010f8
 131          */
 132         writel(CONFIG_SYS_SC520_UARTA_PAR, &sc520_mmcr->par[5]);
 133         writel(CONFIG_SYS_SC520_UARTB_PAR, &sc520_mmcr->par[6]);
 134         writel(CONFIG_SYS_SC520_UARTC_PAR, &sc520_mmcr->par[7]);
 135         writel(CONFIG_SYS_SC520_UARTD_PAR, &sc520_mmcr->par[8]);
 136
 137         /* PARs 9 and 10 are 32MB StrataFlash @ 0x10000000 */
 138         writel(CONFIG_SYS_SC520_SF1_PAR, &sc520_mmcr->par[9]);
 139         writel(CONFIG_SYS_SC520_SF2_PAR, &sc520_mmcr->par[10]);
 140
 141         /* PAR 13 is 4kB DPRAM @ 0x18100000 (implemented in FPGA) */
 142         writel(CONFIG_SYS_SC520_DPRAM_PAR, &sc520_mmcr->par[13]);
 143
 144         /*
 145          * PAR 14 is Low Level I/O (LEDs, Hex Switches etc)
 146          * Already configured in board_init16 (eNET_start16.S)
 147          *
 148          * PAR 15 is Boot ROM
 149          * Already configured in board_init16 (eNET_start16.S)
 150          */
 151 }
 152
 153
 154 int board_early_init_r(void)
 155 {
 156         /* CPU Speed to 100MHz */
 157         gd->cpu_clk = 100000000;
 158
 159         /* Crystal is 33.000MHz */
 160         gd->bus_clk = 33000000;
 161
 162         return 0;
 163 }
 164
 165 void show_boot_progress(int val)
 166 {
 167         uchar led_mask;
 168
 169         led_mask = 0x00;
 170
 171         if (val < 0)
 172                 led_mask |= LED_ERR_BITMASK;
 173
 174         led_mask |= (uchar)(val & 0x001f);
 175         outb(led_mask, LED_LATCH_ADDRESS);
 176 }
 177
 178
 179 int last_stage_init(void)
 180 {
 181         int minor;
 182         int major;
 183
 184         major = minor = 0;
 185
 186         outb(0x00, LED_LATCH_ADDRESS);
 187
 188         register_timer_isr(enet_timer_isr);
 189
 190         printf("Serck Controls eNET\n");
 191
 192         return 0;
 193 }
 194
 195 ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
 196 {
 197         if (banknum == 0) {     /* non-CFI boot flash */
 198                 info->portwidth = FLASH_CFI_8BIT;
 199                 info->chipwidth = FLASH_CFI_BY8;
 200                 info->interface = FLASH_CFI_X8;
 201                 return 1;
 202         } else {
 203                 return 0;
 204         }
 205 }
 206
 207 int board_eth_init(bd_t *bis)
 208 {
 209         return pci_eth_init(bis);
 210 }
 211
 212 void setup_pcat_compatibility()
 213 {
 214         /* disable global interrupt mode */
 215         writeb(0x40, &sc520_mmcr->picicr);
 216
 217         /* set all irqs to edge */
 218         writeb(0x00, &sc520_mmcr->pic_mode[0]);
 219         writeb(0x00, &sc520_mmcr->pic_mode[1]);
 220         writeb(0x00, &sc520_mmcr->pic_mode[2]);
 221
 222         /*
 223          *  active low polarity on PIC interrupt pins,
 224          *  active high polarity on all other irq pins
 225          */
 226         writew(0x0000,&sc520_mmcr->intpinpol);
 227
 228         /*
 229          * PIT 0 -> IRQ0
 230          * RTC -> IRQ8
 231          * FP error -> IRQ13
 232          * UART1 -> IRQ4
 233          * UART2 -> IRQ3
 234          */
 235         writeb(SC520_IRQ0, &sc520_mmcr->pit_int_map[0]);
 236         writeb(SC520_IRQ8, &sc520_mmcr->rtcmap);
 237         writeb(SC520_IRQ13, &sc520_mmcr->ferrmap);
 238         writeb(SC520_IRQ4, &sc520_mmcr->uart_int_map[0]);
 239         writeb(SC520_IRQ3, &sc520_mmcr->uart_int_map[1]);
 240
 241         /* Disable all other interrupt sources */
 242         writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[0]);
 243         writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[1]);
 244         writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[2]);
 245         writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pit_int_map[1]);
 246         writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pit_int_map[2]);
 247         writeb(SC520_IRQ_DISABLED, &sc520_mmcr->ssimap);
 248         writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wdtmap);
 249         writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wpvmap);
 250         writeb(SC520_IRQ_DISABLED, &sc520_mmcr->icemap);
 251 }
 252
 253 void enet_timer_isr(void)
 254 {
 255         static long enet_ticks = 0;
 256
 257         enet_ticks++;
 258
 259         /* Toggle Watchdog every 100ms */
 260         if ((enet_ticks % 100) == 0)
 261                 hw_watchdog_reset();
 262
 263         /* Toggle Run LED every 500ms */
 264         if ((enet_ticks % 500) == 0)
 265                 enet_toggle_run_led();
 266 }
 267
 268 void hw_watchdog_reset(void)
 269 {
 270         /* Watchdog Reset must be atomic */
 271         long flag = disable_interrupts();
 272
 273         if (sc520_mmcr->piodata15_0 & WATCHDOG_PIO_BIT)
 274                 sc520_mmcr->pioclr15_0 = WATCHDOG_PIO_BIT;
 275         else
 276                 sc520_mmcr->pioset15_0 = WATCHDOG_PIO_BIT;
 277
 278         if (flag)
 279                 enable_interrupts();
 280 }
 281
 282 void enet_toggle_run_led(void)
 283 {
 284         unsigned char leds_state= inb(LED_LATCH_ADDRESS);
 285         if (leds_state & LED_RUN_BITMASK)
 286                 outb(leds_state &~ LED_RUN_BITMASK, LED_LATCH_ADDRESS);
 287         else
 288                 outb(leds_state | LED_RUN_BITMASK, LED_LATCH_ADDRESS);
 289 }