board/freescale/t102xrdb/ddr.c

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <i2c.h>
   9 #include <hwconfig.h>
  10 #include <asm/mmu.h>
  11 #include <fsl_ddr_sdram.h>
  12 #include <fsl_ddr_dimm_params.h>
  13 #include <asm/fsl_law.h>
  14 #include <asm/mpc85xx_gpio.h>
  15
  16 DECLARE_GLOBAL_DATA_PTR;
  17
  18 struct board_specific_parameters {
  19         u32 n_ranks;
  20         u32 datarate_mhz_high;
  21         u32 rank_gb;
  22         u32 clk_adjust;
  23         u32 wrlvl_start;
  24         u32 wrlvl_ctl_2;
  25         u32 wrlvl_ctl_3;
  26 };
  27
  28 /*
  29  * datarate_mhz_high values need to be in ascending order
  30  */
  31 static const struct board_specific_parameters udimm0[] = {
  32         /*
  33          * memory controller 0
  34          *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl |
  35          * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |
  36          */
  37         {2,  833,   0,  4,  6,  0x06060607,  0x08080807,},
  38         {2,  1350,  0,  4,  7,  0x0708080A,  0x0A0B0C09,},
  39         {2,  1666,  0,  4,  7,  0x0808090B,  0x0C0D0E0A,},
  40         {1,  833,   0,  4,  6,  0x06060607,  0x08080807,},
  41         {1,  1350,  0,  4,  7,  0x0708080A,  0x0A0B0C09,},
  42         {1,  1666,  0,  4,  7,  0x0808090B,  0x0C0D0E0A,},
  43         {}
  44 };
  45
  46 static const struct board_specific_parameters *udimms[] = {
  47         udimm0,
  48 };
  49
  50 void fsl_ddr_board_options(memctl_options_t *popts,
  51                            dimm_params_t *pdimm,
  52                            unsigned int ctrl_num)
  53 {
  54         const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
  55         ulong ddr_freq;
  56         struct cpu_type *cpu = gd->arch.cpu;
  57
  58         if (ctrl_num > 1) {
  59                 printf("Not supported controller number %d\n", ctrl_num);
  60                 return;
  61         }
  62         if (!pdimm->n_ranks)
  63                 return;
  64
  65         pbsp = udimms[0];
  66
  67         /* Get clk_adjust according to the board ddr freqency and n_banks
  68          * specified in board_specific_parameters table.
  69          */
  70         ddr_freq = get_ddr_freq(0) / 1000000;
  71         while (pbsp->datarate_mhz_high) {
  72                 if (pbsp->n_ranks == pdimm->n_ranks &&
  73                     (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
  74                         if (ddr_freq <= pbsp->datarate_mhz_high) {
  75                                 popts->clk_adjust = pbsp->clk_adjust;
  76                                 popts->wrlvl_start = pbsp->wrlvl_start;
  77                                 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
  78                                 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
  79                                 goto found;
  80                         }
  81                         pbsp_highest = pbsp;
  82                 }
  83                 pbsp++;
  84         }
  85
  86         if (pbsp_highest) {
  87                 printf("Error: board specific timing not found\n");
  88                 printf("for data rate %lu MT/s\n", ddr_freq);
  89                 printf("Trying to use the highest speed (%u) parameters\n",
  90                        pbsp_highest->datarate_mhz_high);
  91                 popts->clk_adjust = pbsp_highest->clk_adjust;
  92                 popts->wrlvl_start = pbsp_highest->wrlvl_start;
  93                 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
  94                 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
  95         } else {
  96                 panic("DIMM is not supported by this board");
  97         }
  98 found:
  99         debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n",
 100               pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb);
 101         debug("\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, ",
 102               pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2);
 103         debug("wrlvl_ctrl_3 0x%x\n", pbsp->wrlvl_ctl_3);
 104
 105         /*
 106          * Factors to consider for half-strength driver enable:
 107          *      - number of DIMMs installed
 108          */
 109         popts->half_strength_driver_enable = 0;
 110         /*
 111          * Write leveling override
 112          */
 113         popts->wrlvl_override = 1;
 114         popts->wrlvl_sample = 0xf;
 115
 116         /*
 117          * rtt and rtt_wr override
 118          */
 119         popts->rtt_override = 0;
 120
 121         /* Enable ZQ calibration */
 122         popts->zq_en = 1;
 123
 124         /* DHC_EN =1, ODT = 75 Ohm */
 125         popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_OFF);
 126         popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_OFF);
 127
 128         /* T1023 supports max DDR bus 32bit width, T1024 supports DDR 64bit,
 129          * force DDR bus width to 32bit for T1023
 130          */
 131         if (cpu->soc_ver == SVR_T1023)
 132                 popts->data_bus_width = DDR_DATA_BUS_WIDTH_32;
 133
 134 #ifdef CONFIG_FORCE_DDR_DATA_BUS_WIDTH_32
 135         /* for DDR bus 32bit test on T1024 */
 136         popts->data_bus_width = DDR_DATA_BUS_WIDTH_32;
 137 #endif
 138
 139 #ifdef CONFIG_T1023RDB
 140         popts->wrlvl_ctl_2 = 0x07070606;
 141         popts->half_strength_driver_enable = 1;
 142 #endif
 143 }
 144
 145 #ifdef CONFIG_SYS_DDR_RAW_TIMING
 146 /* 2GB discrete DDR4 MT40A512M8HX on T1023RDB */
 147 dimm_params_t ddr_raw_timing = {
 148         .n_ranks = 1,
 149         .rank_density = 0x80000000,
 150         .capacity = 0x80000000,
 151         .primary_sdram_width = 32,
 152         .ec_sdram_width = 8,
 153         .registered_dimm = 0,
 154         .mirrored_dimm = 0,
 155         .n_row_addr = 15,
 156         .n_col_addr = 10,
 157         .bank_addr_bits = 2,
 158         .bank_group_bits = 2,
 159         .edc_config = 0,
 160         .burst_lengths_bitmask = 0x0c,
 161         .tckmin_x_ps = 938,
 162         .tckmax_ps = 1500,
 163         .caslat_x = 0x000DFA00,
 164         .taa_ps = 13500,
 165         .trcd_ps = 13500,
 166         .trp_ps = 13500,
 167         .tras_ps = 33000,
 168         .trc_ps = 46500,
 169         .trfc1_ps = 260000,
 170         .trfc2_ps = 160000,
 171         .trfc4_ps = 110000,
 172         .tfaw_ps = 25000,
 173         .trrds_ps = 3700,
 174         .trrdl_ps = 5300,
 175         .tccdl_ps = 5355,
 176         .refresh_rate_ps = 7800000,
 177         .dq_mapping[0] = 0x0,
 178         .dq_mapping[1] = 0x0,
 179         .dq_mapping[2] = 0x0,
 180         .dq_mapping[3] = 0x0,
 181         .dq_mapping[4] = 0x0,
 182         .dq_mapping[5] = 0x0,
 183         .dq_mapping[6] = 0x0,
 184         .dq_mapping[7] = 0x0,
 185         .dq_mapping[8] = 0x0,
 186         .dq_mapping[9] = 0x0,
 187         .dq_mapping[10] = 0x0,
 188         .dq_mapping[11] = 0x0,
 189         .dq_mapping[12] = 0x0,
 190         .dq_mapping[13] = 0x0,
 191         .dq_mapping[14] = 0x0,
 192         .dq_mapping[15] = 0x0,
 193         .dq_mapping[16] = 0x0,
 194         .dq_mapping[17] = 0x0,
 195         .dq_mapping_ors = 1,
 196 };
 197
 198 int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
 199                 unsigned int controller_number,
 200                 unsigned int dimm_number)
 201 {
 202         const char dimm_model[] = "Fixed DDR4 on board";
 203
 204         if (((controller_number == 0) && (dimm_number == 0)) ||
 205             ((controller_number == 1) && (dimm_number == 0))) {
 206                 memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
 207                 memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
 208                 memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
 209         }
 210
 211         return 0;
 212 }
 213 #endif
 214
 215 #if defined(CONFIG_DEEP_SLEEP)
 216 void board_mem_sleep_setup(void)
 217 {
 218         void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE;
 219
 220         /* does not provide HW signals for power management */
 221         clrbits_8(cpld_base + 0x17, 0x40);
 222         /* Disable MCKE isolation */
 223         gpio_set_value(2, 0);
 224         udelay(1);
 225 }
 226 #endif
 227
 228 phys_size_t initdram(int board_type)
 229 {
 230         phys_size_t dram_size;
 231
 232 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 233 #ifndef CONFIG_SYS_DDR_RAW_TIMING
 234         puts("Initializing....using SPD\n");
 235 #endif
 236         dram_size = fsl_ddr_sdram();
 237         dram_size = setup_ddr_tlbs(dram_size / 0x100000);
 238         dram_size *= 0x100000;
 239 #else
 240         /* DDR has been initialised by first stage boot loader */
 241         dram_size =  fsl_ddr_sdram_size();
 242 #endif
 243
 244 #if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
 245         fsl_dp_resume();
 246 #endif
 247
 248         return dram_size;
 249 }