common/usb_storage.c

   1 /*
   2  * Most of this source has been derived from the Linux USB
   3  * project:
   4  *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
   5  *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
   6  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
   7  *   (c) 2000 Yggdrasil Computing, Inc.
   8  *
   9  *
  10  * Adapted for U-Boot:
  11  *   (C) Copyright 2001 Denis Peter, MPL AG Switzerland
  12  * Driver model conversion:
  13  *   (C) Copyright 2015 Google, Inc
  14  *
  15  * For BBB support (C) Copyright 2003
  16  * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
  17  *
  18  * BBB support based on /sys/dev/usb/umass.c from
  19  * FreeBSD.
  20  *
  21  * SPDX-License-Identifier:     GPL-2.0+
  22  */
  23
  24 /* Note:
  25  * Currently only the CBI transport protocoll has been implemented, and it
  26  * is only tested with a TEAC USB Floppy. Other Massstorages with CBI or CB
  27  * transport protocoll may work as well.
  28  */
  29 /*
  30  * New Note:
  31  * Support for USB Mass Storage Devices (BBB) has been added. It has
  32  * only been tested with USB memory sticks.
  33  */
  34
  35
  36 #include <common.h>
  37 #include <command.h>
  38 #include <dm.h>
  39 #include <errno.h>
  40 #include <inttypes.h>
  41 #include <mapmem.h>
  42 #include <memalign.h>
  43 #include <asm/byteorder.h>
  44 #include <asm/processor.h>
  45 #include <dm/device-internal.h>
  46
  47 #include <part.h>
  48 #include <usb.h>
  49
  50 #undef BBB_COMDAT_TRACE
  51 #undef BBB_XPORT_TRACE
  52
  53 #include <scsi.h>
  54 /* direction table -- this indicates the direction of the data
  55  * transfer for each command code -- a 1 indicates input
  56  */
  57 static const unsigned char us_direction[256/8] = {
  58         0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77,
  59         0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00,
  60         0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01,
  61         0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
  62 };
  63 #define US_DIRECTION(x) ((us_direction[x>>3] >> (x & 7)) & 1)
  64
  65 static ccb usb_ccb __attribute__((aligned(ARCH_DMA_MINALIGN)));
  66 static __u32 CBWTag;
  67
  68 #define USB_MAX_STOR_DEV 5
  69 static int usb_max_devs; /* number of highest available usb device */
  70
  71 static block_dev_desc_t usb_dev_desc[USB_MAX_STOR_DEV];
  72
  73 struct us_data;
  74 typedef int (*trans_cmnd)(ccb *cb, struct us_data *data);
  75 typedef int (*trans_reset)(struct us_data *data);
  76
  77 struct us_data {
  78         struct usb_device *pusb_dev;     /* this usb_device */
  79
  80         unsigned int    flags;                  /* from filter initially */
  81 #       define USB_READY        (1 << 0)
  82         unsigned char   ifnum;                  /* interface number */
  83         unsigned char   ep_in;                  /* in endpoint */
  84         unsigned char   ep_out;                 /* out ....... */
  85         unsigned char   ep_int;                 /* interrupt . */
  86         unsigned char   subclass;               /* as in overview */
  87         unsigned char   protocol;               /* .............. */
  88         unsigned char   attention_done;         /* force attn on first cmd */
  89         unsigned short  ip_data;                /* interrupt data */
  90         int             action;                 /* what to do */
  91         int             ip_wanted;              /* needed */
  92         int             *irq_handle;            /* for USB int requests */
  93         unsigned int    irqpipe;                /* pipe for release_irq */
  94         unsigned char   irqmaxp;                /* max packed for irq Pipe */
  95         unsigned char   irqinterval;            /* Intervall for IRQ Pipe */
  96         ccb             *srb;                   /* current srb */
  97         trans_reset     transport_reset;        /* reset routine */
  98         trans_cmnd      transport;              /* transport routine */
  99 };
 100
 101 #ifdef CONFIG_USB_EHCI
 102 /*
 103  * The U-Boot EHCI driver can handle any transfer length as long as there is
 104  * enough free heap space left, but the SCSI READ(10) and WRITE(10) commands are
 105  * limited to 65535 blocks.
 106  */
 107 #define USB_MAX_XFER_BLK        65535
 108 #else
 109 #define USB_MAX_XFER_BLK        20
 110 #endif
 111
 112 static struct us_data usb_stor[USB_MAX_STOR_DEV];
 113
 114 #define USB_STOR_TRANSPORT_GOOD    0
 115 #define USB_STOR_TRANSPORT_FAILED -1
 116 #define USB_STOR_TRANSPORT_ERROR  -2
 117
 118 int usb_stor_get_info(struct usb_device *dev, struct us_data *us,
 119                       block_dev_desc_t *dev_desc);
 120 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
 121                       struct us_data *ss);
 122 unsigned long usb_stor_read(int device, lbaint_t blknr,
 123                             lbaint_t blkcnt, void *buffer);
 124 unsigned long usb_stor_write(int device, lbaint_t blknr,
 125                              lbaint_t blkcnt, const void *buffer);
 126 void uhci_show_temp_int_td(void);
 127
 128 #ifdef CONFIG_PARTITIONS
 129 block_dev_desc_t *usb_stor_get_dev(int index)
 130 {
 131         return (index < usb_max_devs) ? &usb_dev_desc[index] : NULL;
 132 }
 133 #endif
 134
 135 static void usb_show_progress(void)
 136 {
 137         debug(".");
 138 }
 139
 140 /*******************************************************************************
 141  * show info on storage devices; 'usb start/init' must be invoked earlier
 142  * as we only retrieve structures populated during devices initialization
 143  */
 144 int usb_stor_info(void)
 145 {
 146         int i;
 147
 148         if (usb_max_devs > 0) {
 149                 for (i = 0; i < usb_max_devs; i++) {
 150                         printf("  Device %d: ", i);
 151                         dev_print(&usb_dev_desc[i]);
 152                 }
 153                 return 0;
 154         }
 155
 156         printf("No storage devices, perhaps not 'usb start'ed..?\n");
 157         return 1;
 158 }
 159
 160 static unsigned int usb_get_max_lun(struct us_data *us)
 161 {
 162         int len;
 163         ALLOC_CACHE_ALIGN_BUFFER(unsigned char, result, 1);
 164         len = usb_control_msg(us->pusb_dev,
 165                               usb_rcvctrlpipe(us->pusb_dev, 0),
 166                               US_BBB_GET_MAX_LUN,
 167                               USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 168                               0, us->ifnum,
 169                               result, sizeof(char),
 170                               USB_CNTL_TIMEOUT * 5);
 171         debug("Get Max LUN -> len = %i, result = %i\n", len, (int) *result);
 172         return (len > 0) ? *result : 0;
 173 }
 174
 175 static int usb_stor_probe_device(struct usb_device *dev)
 176 {
 177         if (dev == NULL)
 178                 return -ENOENT; /* no more devices available */
 179
 180         debug("\n\nProbing for storage\n");
 181         if (usb_storage_probe(dev, 0, &usb_stor[usb_max_devs])) {
 182                 /* OK, it's a storage device.  Iterate over its LUNs
 183                         * and populate `usb_dev_desc'.
 184                         */
 185                 int lun, max_lun, start = usb_max_devs;
 186
 187                 max_lun = usb_get_max_lun(&usb_stor[usb_max_devs]);
 188                 for (lun = 0;
 189                         lun <= max_lun && usb_max_devs < USB_MAX_STOR_DEV;
 190                         lun++) {
 191                         struct block_dev_desc *blkdev;
 192
 193                         blkdev = &usb_dev_desc[usb_max_devs];
 194                         memset(blkdev, '\0', sizeof(block_dev_desc_t));
 195                         blkdev->if_type = IF_TYPE_USB;
 196                         blkdev->dev = usb_max_devs;
 197                         blkdev->part_type = PART_TYPE_UNKNOWN;
 198                         blkdev->target = 0xff;
 199                         blkdev->type = DEV_TYPE_UNKNOWN;
 200                         blkdev->block_read = usb_stor_read;
 201                         blkdev->block_write = usb_stor_write;
 202                         blkdev->lun = lun;
 203                         blkdev->priv = dev;
 204
 205                         if (usb_stor_get_info(dev, &usb_stor[start],
 206                                               &usb_dev_desc[usb_max_devs]) ==
 207                                               1) {
 208                                 usb_max_devs++;
 209                                 debug("%s: Found device %p\n", __func__, dev);
 210                         }
 211                 }
 212         }
 213
 214         /* if storage device */
 215         if (usb_max_devs == USB_MAX_STOR_DEV) {
 216                 printf("max USB Storage Device reached: %d stopping\n",
 217                        usb_max_devs);
 218                 return -ENOSPC;
 219         }
 220
 221         return 0;
 222 }
 223
 224 void usb_stor_reset(void)
 225 {
 226         usb_max_devs = 0;
 227 }
 228
 229 #ifndef CONFIG_DM_USB
 230 /*******************************************************************************
 231  * scan the usb and reports device info
 232  * to the user if mode = 1
 233  * returns current device or -1 if no
 234  */
 235 int usb_stor_scan(int mode)
 236 {
 237         unsigned char i;
 238
 239         if (mode == 1)
 240                 printf("       scanning usb for storage devices... ");
 241
 242         usb_disable_asynch(1); /* asynch transfer not allowed */
 243
 244         usb_stor_reset();
 245         for (i = 0; i < USB_MAX_DEVICE; i++) {
 246                 struct usb_device *dev;
 247
 248                 dev = usb_get_dev_index(i); /* get device */
 249                 debug("i=%d\n", i);
 250                 if (usb_stor_probe_device(dev))
 251                         break;
 252         } /* for */
 253
 254         usb_disable_asynch(0); /* asynch transfer allowed */
 255         printf("%d Storage Device(s) found\n", usb_max_devs);
 256         if (usb_max_devs > 0)
 257                 return 0;
 258         return -1;
 259 }
 260 #endif
 261
 262 static int usb_stor_irq(struct usb_device *dev)
 263 {
 264         struct us_data *us;
 265         us = (struct us_data *)dev->privptr;
 266
 267         if (us->ip_wanted)
 268                 us->ip_wanted = 0;
 269         return 0;
 270 }
 271
 272
 273 #ifdef  DEBUG
 274
 275 static void usb_show_srb(ccb *pccb)
 276 {
 277         int i;
 278         printf("SRB: len %d datalen 0x%lX\n ", pccb->cmdlen, pccb->datalen);
 279         for (i = 0; i < 12; i++)
 280                 printf("%02X ", pccb->cmd[i]);
 281         printf("\n");
 282 }
 283
 284 static void display_int_status(unsigned long tmp)
 285 {
 286         printf("Status: %s %s %s %s %s %s %s\n",
 287                 (tmp & USB_ST_ACTIVE) ? "Active" : "",
 288                 (tmp & USB_ST_STALLED) ? "Stalled" : "",
 289                 (tmp & USB_ST_BUF_ERR) ? "Buffer Error" : "",
 290                 (tmp & USB_ST_BABBLE_DET) ? "Babble Det" : "",
 291                 (tmp & USB_ST_NAK_REC) ? "NAKed" : "",
 292                 (tmp & USB_ST_CRC_ERR) ? "CRC Error" : "",
 293                 (tmp & USB_ST_BIT_ERR) ? "Bitstuff Error" : "");
 294 }
 295 #endif
 296 /***********************************************************************
 297  * Data transfer routines
 298  ***********************************************************************/
 299
 300 static int us_one_transfer(struct us_data *us, int pipe, char *buf, int length)
 301 {
 302         int max_size;
 303         int this_xfer;
 304         int result;
 305         int partial;
 306         int maxtry;
 307         int stat;
 308
 309         /* determine the maximum packet size for these transfers */
 310         max_size = usb_maxpacket(us->pusb_dev, pipe) * 16;
 311
 312         /* while we have data left to transfer */
 313         while (length) {
 314
 315                 /* calculate how long this will be -- maximum or a remainder */
 316                 this_xfer = length > max_size ? max_size : length;
 317                 length -= this_xfer;
 318
 319                 /* setup the retry counter */
 320                 maxtry = 10;
 321
 322                 /* set up the transfer loop */
 323                 do {
 324                         /* transfer the data */
 325                         debug("Bulk xfer 0x%lx(%d) try #%d\n",
 326                               (ulong)map_to_sysmem(buf), this_xfer,
 327                               11 - maxtry);
 328                         result = usb_bulk_msg(us->pusb_dev, pipe, buf,
 329                                               this_xfer, &partial,
 330                                               USB_CNTL_TIMEOUT * 5);
 331                         debug("bulk_msg returned %d xferred %d/%d\n",
 332                               result, partial, this_xfer);
 333                         if (us->pusb_dev->status != 0) {
 334                                 /* if we stall, we need to clear it before
 335                                  * we go on
 336                                  */
 337 #ifdef DEBUG
 338                                 display_int_status(us->pusb_dev->status);
 339 #endif
 340                                 if (us->pusb_dev->status & USB_ST_STALLED) {
 341                                         debug("stalled ->clearing endpoint" \
 342                                               "halt for pipe 0x%x\n", pipe);
 343                                         stat = us->pusb_dev->status;
 344                                         usb_clear_halt(us->pusb_dev, pipe);
 345                                         us->pusb_dev->status = stat;
 346                                         if (this_xfer == partial) {
 347                                                 debug("bulk transferred" \
 348                                                       "with error %lX," \
 349                                                       " but data ok\n",
 350                                                       us->pusb_dev->status);
 351                                                 return 0;
 352                                         }
 353                                         else
 354                                                 return result;
 355                                 }
 356                                 if (us->pusb_dev->status & USB_ST_NAK_REC) {
 357                                         debug("Device NAKed bulk_msg\n");
 358                                         return result;
 359                                 }
 360                                 debug("bulk transferred with error");
 361                                 if (this_xfer == partial) {
 362                                         debug(" %ld, but data ok\n",
 363                                               us->pusb_dev->status);
 364                                         return 0;
 365                                 }
 366                                 /* if our try counter reaches 0, bail out */
 367                                         debug(" %ld, data %d\n",
 368                                               us->pusb_dev->status, partial);
 369                                 if (!maxtry--)
 370                                                 return result;
 371                         }
 372                         /* update to show what data was transferred */
 373                         this_xfer -= partial;
 374                         buf += partial;
 375                         /* continue until this transfer is done */
 376                 } while (this_xfer);
 377         }
 378
 379         /* if we get here, we're done and successful */
 380         return 0;
 381 }
 382
 383 static int usb_stor_BBB_reset(struct us_data *us)
 384 {
 385         int result;
 386         unsigned int pipe;
 387
 388         /*
 389          * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class)
 390          *
 391          * For Reset Recovery the host shall issue in the following order:
 392          * a) a Bulk-Only Mass Storage Reset
 393          * b) a Clear Feature HALT to the Bulk-In endpoint
 394          * c) a Clear Feature HALT to the Bulk-Out endpoint
 395          *
 396          * This is done in 3 steps.
 397          *
 398          * If the reset doesn't succeed, the device should be port reset.
 399          *
 400          * This comment stolen from FreeBSD's /sys/dev/usb/umass.c.
 401          */
 402         debug("BBB_reset\n");
 403         result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 404                                  US_BBB_RESET,
 405                                  USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 406                                  0, us->ifnum, NULL, 0, USB_CNTL_TIMEOUT * 5);
 407
 408         if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
 409                 debug("RESET:stall\n");
 410                 return -1;
 411         }
 412
 413         /* long wait for reset */
 414         mdelay(150);
 415         debug("BBB_reset result %d: status %lX reset\n",
 416               result, us->pusb_dev->status);
 417         pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 418         result = usb_clear_halt(us->pusb_dev, pipe);
 419         /* long wait for reset */
 420         mdelay(150);
 421         debug("BBB_reset result %d: status %lX clearing IN endpoint\n",
 422               result, us->pusb_dev->status);
 423         /* long wait for reset */
 424         pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 425         result = usb_clear_halt(us->pusb_dev, pipe);
 426         mdelay(150);
 427         debug("BBB_reset result %d: status %lX clearing OUT endpoint\n",
 428               result, us->pusb_dev->status);
 429         debug("BBB_reset done\n");
 430         return 0;
 431 }
 432
 433 /* FIXME: this reset function doesn't really reset the port, and it
 434  * should. Actually it should probably do what it's doing here, and
 435  * reset the port physically
 436  */
 437 static int usb_stor_CB_reset(struct us_data *us)
 438 {
 439         unsigned char cmd[12];
 440         int result;
 441
 442         debug("CB_reset\n");
 443         memset(cmd, 0xff, sizeof(cmd));
 444         cmd[0] = SCSI_SEND_DIAG;
 445         cmd[1] = 4;
 446         result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 447                                  US_CBI_ADSC,
 448                                  USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 449                                  0, us->ifnum, cmd, sizeof(cmd),
 450                                  USB_CNTL_TIMEOUT * 5);
 451
 452         /* long wait for reset */
 453         mdelay(1500);
 454         debug("CB_reset result %d: status %lX clearing endpoint halt\n",
 455               result, us->pusb_dev->status);
 456         usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_in));
 457         usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_out));
 458
 459         debug("CB_reset done\n");
 460         return 0;
 461 }
 462
 463 /*
 464  * Set up the command for a BBB device. Note that the actual SCSI
 465  * command is copied into cbw.CBWCDB.
 466  */
 467 static int usb_stor_BBB_comdat(ccb *srb, struct us_data *us)
 468 {
 469         int result;
 470         int actlen;
 471         int dir_in;
 472         unsigned int pipe;
 473         ALLOC_CACHE_ALIGN_BUFFER(struct umass_bbb_cbw, cbw, 1);
 474
 475         dir_in = US_DIRECTION(srb->cmd[0]);
 476
 477 #ifdef BBB_COMDAT_TRACE
 478         printf("dir %d lun %d cmdlen %d cmd %p datalen %lu pdata %p\n",
 479                 dir_in, srb->lun, srb->cmdlen, srb->cmd, srb->datalen,
 480                 srb->pdata);
 481         if (srb->cmdlen) {
 482                 for (result = 0; result < srb->cmdlen; result++)
 483                         printf("cmd[%d] %#x ", result, srb->cmd[result]);
 484                 printf("\n");
 485         }
 486 #endif
 487         /* sanity checks */
 488         if (!(srb->cmdlen <= CBWCDBLENGTH)) {
 489                 debug("usb_stor_BBB_comdat:cmdlen too large\n");
 490                 return -1;
 491         }
 492
 493         /* always OUT to the ep */
 494         pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 495
 496         cbw->dCBWSignature = cpu_to_le32(CBWSIGNATURE);
 497         cbw->dCBWTag = cpu_to_le32(CBWTag++);
 498         cbw->dCBWDataTransferLength = cpu_to_le32(srb->datalen);
 499         cbw->bCBWFlags = (dir_in ? CBWFLAGS_IN : CBWFLAGS_OUT);
 500         cbw->bCBWLUN = srb->lun;
 501         cbw->bCDBLength = srb->cmdlen;
 502         /* copy the command data into the CBW command data buffer */
 503         /* DST SRC LEN!!! */
 504
 505         memcpy(cbw->CBWCDB, srb->cmd, srb->cmdlen);
 506         result = usb_bulk_msg(us->pusb_dev, pipe, cbw, UMASS_BBB_CBW_SIZE,
 507                               &actlen, USB_CNTL_TIMEOUT * 5);
 508         if (result < 0)
 509                 debug("usb_stor_BBB_comdat:usb_bulk_msg error\n");
 510         return result;
 511 }
 512
 513 /* FIXME: we also need a CBI_command which sets up the completion
 514  * interrupt, and waits for it
 515  */
 516 static int usb_stor_CB_comdat(ccb *srb, struct us_data *us)
 517 {
 518         int result = 0;
 519         int dir_in, retry;
 520         unsigned int pipe;
 521         unsigned long status;
 522
 523         retry = 5;
 524         dir_in = US_DIRECTION(srb->cmd[0]);
 525
 526         if (dir_in)
 527                 pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 528         else
 529                 pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 530
 531         while (retry--) {
 532                 debug("CBI gets a command: Try %d\n", 5 - retry);
 533 #ifdef DEBUG
 534                 usb_show_srb(srb);
 535 #endif
 536                 /* let's send the command via the control pipe */
 537                 result = usb_control_msg(us->pusb_dev,
 538                                          usb_sndctrlpipe(us->pusb_dev , 0),
 539                                          US_CBI_ADSC,
 540                                          USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 541                                          0, us->ifnum,
 542                                          srb->cmd, srb->cmdlen,
 543                                          USB_CNTL_TIMEOUT * 5);
 544                 debug("CB_transport: control msg returned %d, status %lX\n",
 545                       result, us->pusb_dev->status);
 546                 /* check the return code for the command */
 547                 if (result < 0) {
 548                         if (us->pusb_dev->status & USB_ST_STALLED) {
 549                                 status = us->pusb_dev->status;
 550                                 debug(" stall during command found," \
 551                                       " clear pipe\n");
 552                                 usb_clear_halt(us->pusb_dev,
 553                                               usb_sndctrlpipe(us->pusb_dev, 0));
 554                                 us->pusb_dev->status = status;
 555                         }
 556                         debug(" error during command %02X" \
 557                               " Stat = %lX\n", srb->cmd[0],
 558                               us->pusb_dev->status);
 559                         return result;
 560                 }
 561                 /* transfer the data payload for this command, if one exists*/
 562
 563                 debug("CB_transport: control msg returned %d," \
 564                       " direction is %s to go 0x%lx\n", result,
 565                       dir_in ? "IN" : "OUT", srb->datalen);
 566                 if (srb->datalen) {
 567                         result = us_one_transfer(us, pipe, (char *)srb->pdata,
 568                                                  srb->datalen);
 569                         debug("CBI attempted to transfer data," \
 570                               " result is %d status %lX, len %d\n",
 571                               result, us->pusb_dev->status,
 572                                 us->pusb_dev->act_len);
 573                         if (!(us->pusb_dev->status & USB_ST_NAK_REC))
 574                                 break;
 575                 } /* if (srb->datalen) */
 576                 else
 577                         break;
 578         }
 579         /* return result */
 580
 581         return result;
 582 }
 583
 584
 585 static int usb_stor_CBI_get_status(ccb *srb, struct us_data *us)
 586 {
 587         int timeout;
 588
 589         us->ip_wanted = 1;
 590         submit_int_msg(us->pusb_dev, us->irqpipe,
 591                         (void *) &us->ip_data, us->irqmaxp, us->irqinterval);
 592         timeout = 1000;
 593         while (timeout--) {
 594                 if (us->ip_wanted == 0)
 595                         break;
 596                 mdelay(10);
 597         }
 598         if (us->ip_wanted) {
 599                 printf("        Did not get interrupt on CBI\n");
 600                 us->ip_wanted = 0;
 601                 return USB_STOR_TRANSPORT_ERROR;
 602         }
 603         debug("Got interrupt data 0x%x, transfered %d status 0x%lX\n",
 604               us->ip_data, us->pusb_dev->irq_act_len,
 605               us->pusb_dev->irq_status);
 606         /* UFI gives us ASC and ASCQ, like a request sense */
 607         if (us->subclass == US_SC_UFI) {
 608                 if (srb->cmd[0] == SCSI_REQ_SENSE ||
 609                     srb->cmd[0] == SCSI_INQUIRY)
 610                         return USB_STOR_TRANSPORT_GOOD; /* Good */
 611                 else if (us->ip_data)
 612                         return USB_STOR_TRANSPORT_FAILED;
 613                 else
 614                         return USB_STOR_TRANSPORT_GOOD;
 615         }
 616         /* otherwise, we interpret the data normally */
 617         switch (us->ip_data) {
 618         case 0x0001:
 619                 return USB_STOR_TRANSPORT_GOOD;
 620         case 0x0002:
 621                 return USB_STOR_TRANSPORT_FAILED;
 622         default:
 623                 return USB_STOR_TRANSPORT_ERROR;
 624         }                       /* switch */
 625         return USB_STOR_TRANSPORT_ERROR;
 626 }
 627
 628 #define USB_TRANSPORT_UNKNOWN_RETRY 5
 629 #define USB_TRANSPORT_NOT_READY_RETRY 10
 630
 631 /* clear a stall on an endpoint - special for BBB devices */
 632 static int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt)
 633 {
 634         int result;
 635
 636         /* ENDPOINT_HALT = 0, so set value to 0 */
 637         result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 638                                 USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
 639                                 0, endpt, NULL, 0, USB_CNTL_TIMEOUT * 5);
 640         return result;
 641 }
 642
 643 static int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
 644 {
 645         int result, retry;
 646         int dir_in;
 647         int actlen, data_actlen;
 648         unsigned int pipe, pipein, pipeout;
 649         ALLOC_CACHE_ALIGN_BUFFER(struct umass_bbb_csw, csw, 1);
 650 #ifdef BBB_XPORT_TRACE
 651         unsigned char *ptr;
 652         int index;
 653 #endif
 654
 655         dir_in = US_DIRECTION(srb->cmd[0]);
 656
 657         /* COMMAND phase */
 658         debug("COMMAND phase\n");
 659         result = usb_stor_BBB_comdat(srb, us);
 660         if (result < 0) {
 661                 debug("failed to send CBW status %ld\n",
 662                       us->pusb_dev->status);
 663                 usb_stor_BBB_reset(us);
 664                 return USB_STOR_TRANSPORT_FAILED;
 665         }
 666         if (!(us->flags & USB_READY))
 667                 mdelay(5);
 668         pipein = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
 669         pipeout = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
 670         /* DATA phase + error handling */
 671         data_actlen = 0;
 672         /* no data, go immediately to the STATUS phase */
 673         if (srb->datalen == 0)
 674                 goto st;
 675         debug("DATA phase\n");
 676         if (dir_in)
 677                 pipe = pipein;
 678         else
 679                 pipe = pipeout;
 680
 681         result = usb_bulk_msg(us->pusb_dev, pipe, srb->pdata, srb->datalen,
 682                               &data_actlen, USB_CNTL_TIMEOUT * 5);
 683         /* special handling of STALL in DATA phase */
 684         if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
 685                 debug("DATA:stall\n");
 686                 /* clear the STALL on the endpoint */
 687                 result = usb_stor_BBB_clear_endpt_stall(us,
 688                                         dir_in ? us->ep_in : us->ep_out);
 689                 if (result >= 0)
 690                         /* continue on to STATUS phase */
 691                         goto st;
 692         }
 693         if (result < 0) {
 694                 debug("usb_bulk_msg error status %ld\n",
 695                       us->pusb_dev->status);
 696                 usb_stor_BBB_reset(us);
 697                 return USB_STOR_TRANSPORT_FAILED;
 698         }
 699 #ifdef BBB_XPORT_TRACE
 700         for (index = 0; index < data_actlen; index++)
 701                 printf("pdata[%d] %#x ", index, srb->pdata[index]);
 702         printf("\n");
 703 #endif
 704         /* STATUS phase + error handling */
 705 st:
 706         retry = 0;
 707 again:
 708         debug("STATUS phase\n");
 709         result = usb_bulk_msg(us->pusb_dev, pipein, csw, UMASS_BBB_CSW_SIZE,
 710                                 &actlen, USB_CNTL_TIMEOUT*5);
 711
 712         /* special handling of STALL in STATUS phase */
 713         if ((result < 0) && (retry < 1) &&
 714             (us->pusb_dev->status & USB_ST_STALLED)) {
 715                 debug("STATUS:stall\n");
 716                 /* clear the STALL on the endpoint */
 717                 result = usb_stor_BBB_clear_endpt_stall(us, us->ep_in);
 718                 if (result >= 0 && (retry++ < 1))
 719                         /* do a retry */
 720                         goto again;
 721         }
 722         if (result < 0) {
 723                 debug("usb_bulk_msg error status %ld\n",
 724                       us->pusb_dev->status);
 725                 usb_stor_BBB_reset(us);
 726                 return USB_STOR_TRANSPORT_FAILED;
 727         }
 728 #ifdef BBB_XPORT_TRACE
 729         ptr = (unsigned char *)csw;
 730         for (index = 0; index < UMASS_BBB_CSW_SIZE; index++)
 731                 printf("ptr[%d] %#x ", index, ptr[index]);
 732         printf("\n");
 733 #endif
 734         /* misuse pipe to get the residue */
 735         pipe = le32_to_cpu(csw->dCSWDataResidue);
 736         if (pipe == 0 && srb->datalen != 0 && srb->datalen - data_actlen != 0)
 737                 pipe = srb->datalen - data_actlen;
 738         if (CSWSIGNATURE != le32_to_cpu(csw->dCSWSignature)) {
 739                 debug("!CSWSIGNATURE\n");
 740                 usb_stor_BBB_reset(us);
 741                 return USB_STOR_TRANSPORT_FAILED;
 742         } else if ((CBWTag - 1) != le32_to_cpu(csw->dCSWTag)) {
 743                 debug("!Tag\n");
 744                 usb_stor_BBB_reset(us);
 745                 return USB_STOR_TRANSPORT_FAILED;
 746         } else if (csw->bCSWStatus > CSWSTATUS_PHASE) {
 747                 debug(">PHASE\n");
 748                 usb_stor_BBB_reset(us);
 749                 return USB_STOR_TRANSPORT_FAILED;
 750         } else if (csw->bCSWStatus == CSWSTATUS_PHASE) {
 751                 debug("=PHASE\n");
 752                 usb_stor_BBB_reset(us);
 753                 return USB_STOR_TRANSPORT_FAILED;
 754         } else if (data_actlen > srb->datalen) {
 755                 debug("transferred %dB instead of %ldB\n",
 756                       data_actlen, srb->datalen);
 757                 return USB_STOR_TRANSPORT_FAILED;
 758         } else if (csw->bCSWStatus == CSWSTATUS_FAILED) {
 759                 debug("FAILED\n");
 760                 return USB_STOR_TRANSPORT_FAILED;
 761         }
 762
 763         return result;
 764 }
 765
 766 static int usb_stor_CB_transport(ccb *srb, struct us_data *us)
 767 {
 768         int result, status;
 769         ccb *psrb;
 770         ccb reqsrb;
 771         int retry, notready;
 772
 773         psrb = &reqsrb;
 774         status = USB_STOR_TRANSPORT_GOOD;
 775         retry = 0;
 776         notready = 0;
 777         /* issue the command */
 778 do_retry:
 779         result = usb_stor_CB_comdat(srb, us);
 780         debug("command / Data returned %d, status %lX\n",
 781               result, us->pusb_dev->status);
 782         /* if this is an CBI Protocol, get IRQ */
 783         if (us->protocol == US_PR_CBI) {
 784                 status = usb_stor_CBI_get_status(srb, us);
 785                 /* if the status is error, report it */
 786                 if (status == USB_STOR_TRANSPORT_ERROR) {
 787                         debug(" USB CBI Command Error\n");
 788                         return status;
 789                 }
 790                 srb->sense_buf[12] = (unsigned char)(us->ip_data >> 8);
 791                 srb->sense_buf[13] = (unsigned char)(us->ip_data & 0xff);
 792                 if (!us->ip_data) {
 793                         /* if the status is good, report it */
 794                         if (status == USB_STOR_TRANSPORT_GOOD) {
 795                                 debug(" USB CBI Command Good\n");
 796                                 return status;
 797                         }
 798                 }
 799         }
 800         /* do we have to issue an auto request? */
 801         /* HERE we have to check the result */
 802         if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) {
 803                 debug("ERROR %lX\n", us->pusb_dev->status);
 804                 us->transport_reset(us);
 805                 return USB_STOR_TRANSPORT_ERROR;
 806         }
 807         if ((us->protocol == US_PR_CBI) &&
 808             ((srb->cmd[0] == SCSI_REQ_SENSE) ||
 809             (srb->cmd[0] == SCSI_INQUIRY))) {
 810                 /* do not issue an autorequest after request sense */
 811                 debug("No auto request and good\n");
 812                 return USB_STOR_TRANSPORT_GOOD;
 813         }
 814         /* issue an request_sense */
 815         memset(&psrb->cmd[0], 0, 12);
 816         psrb->cmd[0] = SCSI_REQ_SENSE;
 817         psrb->cmd[1] = srb->lun << 5;
 818         psrb->cmd[4] = 18;
 819         psrb->datalen = 18;
 820         psrb->pdata = &srb->sense_buf[0];
 821         psrb->cmdlen = 12;
 822         /* issue the command */
 823         result = usb_stor_CB_comdat(psrb, us);
 824         debug("auto request returned %d\n", result);
 825         /* if this is an CBI Protocol, get IRQ */
 826         if (us->protocol == US_PR_CBI)
 827                 status = usb_stor_CBI_get_status(psrb, us);
 828
 829         if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) {
 830                 debug(" AUTO REQUEST ERROR %ld\n",
 831                       us->pusb_dev->status);
 832                 return USB_STOR_TRANSPORT_ERROR;
 833         }
 834         debug("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\n",
 835               srb->sense_buf[0], srb->sense_buf[2],
 836               srb->sense_buf[12], srb->sense_buf[13]);
 837         /* Check the auto request result */
 838         if ((srb->sense_buf[2] == 0) &&
 839             (srb->sense_buf[12] == 0) &&
 840             (srb->sense_buf[13] == 0)) {
 841                 /* ok, no sense */
 842                 return USB_STOR_TRANSPORT_GOOD;
 843         }
 844
 845         /* Check the auto request result */
 846         switch (srb->sense_buf[2]) {
 847         case 0x01:
 848                 /* Recovered Error */
 849                 return USB_STOR_TRANSPORT_GOOD;
 850                 break;
 851         case 0x02:
 852                 /* Not Ready */
 853                 if (notready++ > USB_TRANSPORT_NOT_READY_RETRY) {
 854                         printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X"
 855                                " 0x%02X (NOT READY)\n", srb->cmd[0],
 856                                 srb->sense_buf[0], srb->sense_buf[2],
 857                                 srb->sense_buf[12], srb->sense_buf[13]);
 858                         return USB_STOR_TRANSPORT_FAILED;
 859                 } else {
 860                         mdelay(100);
 861                         goto do_retry;
 862                 }
 863                 break;
 864         default:
 865                 if (retry++ > USB_TRANSPORT_UNKNOWN_RETRY) {
 866                         printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X"
 867                                " 0x%02X\n", srb->cmd[0], srb->sense_buf[0],
 868                                 srb->sense_buf[2], srb->sense_buf[12],
 869                                 srb->sense_buf[13]);
 870                         return USB_STOR_TRANSPORT_FAILED;
 871                 } else
 872                         goto do_retry;
 873                 break;
 874         }
 875         return USB_STOR_TRANSPORT_FAILED;
 876 }
 877
 878
 879 static int usb_inquiry(ccb *srb, struct us_data *ss)
 880 {
 881         int retry, i;
 882         retry = 5;
 883         do {
 884                 memset(&srb->cmd[0], 0, 12);
 885                 srb->cmd[0] = SCSI_INQUIRY;
 886                 srb->cmd[1] = srb->lun << 5;
 887                 srb->cmd[4] = 36;
 888                 srb->datalen = 36;
 889                 srb->cmdlen = 12;
 890                 i = ss->transport(srb, ss);
 891                 debug("inquiry returns %d\n", i);
 892                 if (i == 0)
 893                         break;
 894         } while (--retry);
 895
 896         if (!retry) {
 897                 printf("error in inquiry\n");
 898                 return -1;
 899         }
 900         return 0;
 901 }
 902
 903 static int usb_request_sense(ccb *srb, struct us_data *ss)
 904 {
 905         char *ptr;
 906
 907         ptr = (char *)srb->pdata;
 908         memset(&srb->cmd[0], 0, 12);
 909         srb->cmd[0] = SCSI_REQ_SENSE;
 910         srb->cmd[1] = srb->lun << 5;
 911         srb->cmd[4] = 18;
 912         srb->datalen = 18;
 913         srb->pdata = &srb->sense_buf[0];
 914         srb->cmdlen = 12;
 915         ss->transport(srb, ss);
 916         debug("Request Sense returned %02X %02X %02X\n",
 917               srb->sense_buf[2], srb->sense_buf[12],
 918               srb->sense_buf[13]);
 919         srb->pdata = (uchar *)ptr;
 920         return 0;
 921 }
 922
 923 static int usb_test_unit_ready(ccb *srb, struct us_data *ss)
 924 {
 925         int retries = 10;
 926
 927         do {
 928                 memset(&srb->cmd[0], 0, 12);
 929                 srb->cmd[0] = SCSI_TST_U_RDY;
 930                 srb->cmd[1] = srb->lun << 5;
 931                 srb->datalen = 0;
 932                 srb->cmdlen = 12;
 933                 if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD) {
 934                         ss->flags |= USB_READY;
 935                         return 0;
 936                 }
 937                 usb_request_sense(srb, ss);
 938                 /*
 939                  * Check the Key Code Qualifier, if it matches
 940                  * "Not Ready - medium not present"
 941                  * (the sense Key equals 0x2 and the ASC is 0x3a)
 942                  * return immediately as the medium being absent won't change
 943                  * unless there is a user action.
 944                  */
 945                 if ((srb->sense_buf[2] == 0x02) &&
 946                     (srb->sense_buf[12] == 0x3a))
 947                         return -1;
 948                 mdelay(100);
 949         } while (retries--);
 950
 951         return -1;
 952 }
 953
 954 static int usb_read_capacity(ccb *srb, struct us_data *ss)
 955 {
 956         int retry;
 957         /* XXX retries */
 958         retry = 3;
 959         do {
 960                 memset(&srb->cmd[0], 0, 12);
 961                 srb->cmd[0] = SCSI_RD_CAPAC;
 962                 srb->cmd[1] = srb->lun << 5;
 963                 srb->datalen = 8;
 964                 srb->cmdlen = 12;
 965                 if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD)
 966                         return 0;
 967         } while (retry--);
 968
 969         return -1;
 970 }
 971
 972 static int usb_read_10(ccb *srb, struct us_data *ss, unsigned long start,
 973                        unsigned short blocks)
 974 {
 975         memset(&srb->cmd[0], 0, 12);
 976         srb->cmd[0] = SCSI_READ10;
 977         srb->cmd[1] = srb->lun << 5;
 978         srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
 979         srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
 980         srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
 981         srb->cmd[5] = ((unsigned char) (start)) & 0xff;
 982         srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
 983         srb->cmd[8] = (unsigned char) blocks & 0xff;
 984         srb->cmdlen = 12;
 985         debug("read10: start %lx blocks %x\n", start, blocks);
 986         return ss->transport(srb, ss);
 987 }
 988
 989 static int usb_write_10(ccb *srb, struct us_data *ss, unsigned long start,
 990                         unsigned short blocks)
 991 {
 992         memset(&srb->cmd[0], 0, 12);
 993         srb->cmd[0] = SCSI_WRITE10;
 994         srb->cmd[1] = srb->lun << 5;
 995         srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
 996         srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
 997         srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
 998         srb->cmd[5] = ((unsigned char) (start)) & 0xff;
 999         srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
1000         srb->cmd[8] = (unsigned char) blocks & 0xff;
1001         srb->cmdlen = 12;
1002         debug("write10: start %lx blocks %x\n", start, blocks);
1003         return ss->transport(srb, ss);
1004 }
1005
1006
1007 #ifdef CONFIG_USB_BIN_FIXUP
1008 /*
1009  * Some USB storage devices queried for SCSI identification data respond with
1010  * binary strings, which if output to the console freeze the terminal. The
1011  * workaround is to modify the vendor and product strings read from such
1012  * device with proper values (as reported by 'usb info').
1013  *
1014  * Vendor and product length limits are taken from the definition of
1015  * block_dev_desc_t in include/part.h.
1016  */
1017 static void usb_bin_fixup(struct usb_device_descriptor descriptor,
1018                                 unsigned char vendor[],
1019                                 unsigned char product[]) {
1020         const unsigned char max_vendor_len = 40;
1021         const unsigned char max_product_len = 20;
1022         if (descriptor.idVendor == 0x0424 && descriptor.idProduct == 0x223a) {
1023                 strncpy((char *)vendor, "SMSC", max_vendor_len);
1024                 strncpy((char *)product, "Flash Media Cntrller",
1025                         max_product_len);
1026         }
1027 }
1028 #endif /* CONFIG_USB_BIN_FIXUP */
1029
1030 unsigned long usb_stor_read(int device, lbaint_t blknr,
1031                             lbaint_t blkcnt, void *buffer)
1032 {
1033         lbaint_t start, blks;
1034         uintptr_t buf_addr;
1035         unsigned short smallblks;
1036         struct usb_device *dev;
1037         struct us_data *ss;
1038         int retry;
1039         ccb *srb = &usb_ccb;
1040
1041         if (blkcnt == 0)
1042                 return 0;
1043
1044         device &= 0xff;
1045         /* Setup  device */
1046         debug("\nusb_read: dev %d\n", device);
1047         dev = usb_dev_desc[device].priv;
1048         if (!dev) {
1049                 debug("%s: No device\n", __func__);
1050                 return 0;
1051         }
1052         ss = (struct us_data *)dev->privptr;
1053
1054         usb_disable_asynch(1); /* asynch transfer not allowed */
1055         srb->lun = usb_dev_desc[device].lun;
1056         buf_addr = (uintptr_t)buffer;
1057         start = blknr;
1058         blks = blkcnt;
1059
1060         debug("\nusb_read: dev %d startblk " LBAF ", blccnt " LBAF
1061               " buffer %" PRIxPTR "\n", device, start, blks, buf_addr);
1062
1063         do {
1064                 /* XXX need some comment here */
1065                 retry = 2;
1066                 srb->pdata = (unsigned char *)buf_addr;
1067                 if (blks > USB_MAX_XFER_BLK)
1068                         smallblks = USB_MAX_XFER_BLK;
1069                 else
1070                         smallblks = (unsigned short) blks;
1071 retry_it:
1072                 if (smallblks == USB_MAX_XFER_BLK)
1073                         usb_show_progress();
1074                 srb->datalen = usb_dev_desc[device].blksz * smallblks;
1075                 srb->pdata = (unsigned char *)buf_addr;
1076                 if (usb_read_10(srb, ss, start, smallblks)) {
1077                         debug("Read ERROR\n");
1078                         usb_request_sense(srb, ss);
1079                         if (retry--)
1080                                 goto retry_it;
1081                         blkcnt -= blks;
1082                         break;
1083                 }
1084                 start += smallblks;
1085                 blks -= smallblks;
1086                 buf_addr += srb->datalen;
1087         } while (blks != 0);
1088         ss->flags &= ~USB_READY;
1089
1090         debug("usb_read: end startblk " LBAF
1091               ", blccnt %x buffer %" PRIxPTR "\n",
1092               start, smallblks, buf_addr);
1093
1094         usb_disable_asynch(0); /* asynch transfer allowed */
1095         if (blkcnt >= USB_MAX_XFER_BLK)
1096                 debug("\n");
1097         return blkcnt;
1098 }
1099
1100 unsigned long usb_stor_write(int device, lbaint_t blknr,
1101                                 lbaint_t blkcnt, const void *buffer)
1102 {
1103         lbaint_t start, blks;
1104         uintptr_t buf_addr;
1105         unsigned short smallblks;
1106         struct usb_device *dev;
1107         struct us_data *ss;
1108         int retry;
1109         ccb *srb = &usb_ccb;
1110
1111         if (blkcnt == 0)
1112                 return 0;
1113
1114         device &= 0xff;
1115         /* Setup  device */
1116         debug("\nusb_write: dev %d\n", device);
1117         dev = usb_dev_desc[device].priv;
1118         if (!dev)
1119                 return 0;
1120         ss = (struct us_data *)dev->privptr;
1121
1122         usb_disable_asynch(1); /* asynch transfer not allowed */
1123
1124         srb->lun = usb_dev_desc[device].lun;
1125         buf_addr = (uintptr_t)buffer;
1126         start = blknr;
1127         blks = blkcnt;
1128
1129         debug("\nusb_write: dev %d startblk " LBAF ", blccnt " LBAF
1130               " buffer %" PRIxPTR "\n", device, start, blks, buf_addr);
1131
1132         do {
1133                 /* If write fails retry for max retry count else
1134                  * return with number of blocks written successfully.
1135                  */
1136                 retry = 2;
1137                 srb->pdata = (unsigned char *)buf_addr;
1138                 if (blks > USB_MAX_XFER_BLK)
1139                         smallblks = USB_MAX_XFER_BLK;
1140                 else
1141                         smallblks = (unsigned short) blks;
1142 retry_it:
1143                 if (smallblks == USB_MAX_XFER_BLK)
1144                         usb_show_progress();
1145                 srb->datalen = usb_dev_desc[device].blksz * smallblks;
1146                 srb->pdata = (unsigned char *)buf_addr;
1147                 if (usb_write_10(srb, ss, start, smallblks)) {
1148                         debug("Write ERROR\n");
1149                         usb_request_sense(srb, ss);
1150                         if (retry--)
1151                                 goto retry_it;
1152                         blkcnt -= blks;
1153                         break;
1154                 }
1155                 start += smallblks;
1156                 blks -= smallblks;
1157                 buf_addr += srb->datalen;
1158         } while (blks != 0);
1159         ss->flags &= ~USB_READY;
1160
1161         debug("usb_write: end startblk " LBAF ", blccnt %x buffer %"
1162               PRIxPTR "\n", start, smallblks, buf_addr);
1163
1164         usb_disable_asynch(0); /* asynch transfer allowed */
1165         if (blkcnt >= USB_MAX_XFER_BLK)
1166                 debug("\n");
1167         return blkcnt;
1168
1169 }
1170
1171 /* Probe to see if a new device is actually a Storage device */
1172 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
1173                       struct us_data *ss)
1174 {
1175         struct usb_interface *iface;
1176         int i;
1177         struct usb_endpoint_descriptor *ep_desc;
1178         unsigned int flags = 0;
1179
1180         /* let's examine the device now */
1181         iface = &dev->config.if_desc[ifnum];
1182
1183         if (dev->descriptor.bDeviceClass != 0 ||
1184                         iface->desc.bInterfaceClass != USB_CLASS_MASS_STORAGE ||
1185                         iface->desc.bInterfaceSubClass < US_SC_MIN ||
1186                         iface->desc.bInterfaceSubClass > US_SC_MAX) {
1187                 debug("Not mass storage\n");
1188                 /* if it's not a mass storage, we go no further */
1189                 return 0;
1190         }
1191
1192         memset(ss, 0, sizeof(struct us_data));
1193
1194         /* At this point, we know we've got a live one */
1195         debug("\n\nUSB Mass Storage device detected\n");
1196
1197         /* Initialize the us_data structure with some useful info */
1198         ss->flags = flags;
1199         ss->ifnum = ifnum;
1200         ss->pusb_dev = dev;
1201         ss->attention_done = 0;
1202         ss->subclass = iface->desc.bInterfaceSubClass;
1203         ss->protocol = iface->desc.bInterfaceProtocol;
1204
1205         /* set the handler pointers based on the protocol */
1206         debug("Transport: ");
1207         switch (ss->protocol) {
1208         case US_PR_CB:
1209                 debug("Control/Bulk\n");
1210                 ss->transport = usb_stor_CB_transport;
1211                 ss->transport_reset = usb_stor_CB_reset;
1212                 break;
1213
1214         case US_PR_CBI:
1215                 debug("Control/Bulk/Interrupt\n");
1216                 ss->transport = usb_stor_CB_transport;
1217                 ss->transport_reset = usb_stor_CB_reset;
1218                 break;
1219         case US_PR_BULK:
1220                 debug("Bulk/Bulk/Bulk\n");
1221                 ss->transport = usb_stor_BBB_transport;
1222                 ss->transport_reset = usb_stor_BBB_reset;
1223                 break;
1224         default:
1225                 printf("USB Storage Transport unknown / not yet implemented\n");
1226                 return 0;
1227                 break;
1228         }
1229
1230         /*
1231          * We are expecting a minimum of 2 endpoints - in and out (bulk).
1232          * An optional interrupt is OK (necessary for CBI protocol).
1233          * We will ignore any others.
1234          */
1235         for (i = 0; i < iface->desc.bNumEndpoints; i++) {
1236                 ep_desc = &iface->ep_desc[i];
1237                 /* is it an BULK endpoint? */
1238                 if ((ep_desc->bmAttributes &
1239                      USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
1240                         if (ep_desc->bEndpointAddress & USB_DIR_IN)
1241                                 ss->ep_in = ep_desc->bEndpointAddress &
1242                                                 USB_ENDPOINT_NUMBER_MASK;
1243                         else
1244                                 ss->ep_out =
1245                                         ep_desc->bEndpointAddress &
1246                                         USB_ENDPOINT_NUMBER_MASK;
1247                 }
1248
1249                 /* is it an interrupt endpoint? */
1250                 if ((ep_desc->bmAttributes &
1251                      USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
1252                         ss->ep_int = ep_desc->bEndpointAddress &
1253                                                 USB_ENDPOINT_NUMBER_MASK;
1254                         ss->irqinterval = ep_desc->bInterval;
1255                 }
1256         }
1257         debug("Endpoints In %d Out %d Int %d\n",
1258               ss->ep_in, ss->ep_out, ss->ep_int);
1259
1260         /* Do some basic sanity checks, and bail if we find a problem */
1261         if (usb_set_interface(dev, iface->desc.bInterfaceNumber, 0) ||
1262             !ss->ep_in || !ss->ep_out ||
1263             (ss->protocol == US_PR_CBI && ss->ep_int == 0)) {
1264                 debug("Problems with device\n");
1265                 return 0;
1266         }
1267         /* set class specific stuff */
1268         /* We only handle certain protocols.  Currently, these are
1269          * the only ones.
1270          * The SFF8070 accepts the requests used in u-boot
1271          */
1272         if (ss->subclass != US_SC_UFI && ss->subclass != US_SC_SCSI &&
1273             ss->subclass != US_SC_8070) {
1274                 printf("Sorry, protocol %d not yet supported.\n", ss->subclass);
1275                 return 0;
1276         }
1277         if (ss->ep_int) {
1278                 /* we had found an interrupt endpoint, prepare irq pipe
1279                  * set up the IRQ pipe and handler
1280                  */
1281                 ss->irqinterval = (ss->irqinterval > 0) ? ss->irqinterval : 255;
1282                 ss->irqpipe = usb_rcvintpipe(ss->pusb_dev, ss->ep_int);
1283                 ss->irqmaxp = usb_maxpacket(dev, ss->irqpipe);
1284                 dev->irq_handle = usb_stor_irq;
1285         }
1286         dev->privptr = (void *)ss;
1287         return 1;
1288 }
1289
1290 int usb_stor_get_info(struct usb_device *dev, struct us_data *ss,
1291                       block_dev_desc_t *dev_desc)
1292 {
1293         unsigned char perq, modi;
1294         ALLOC_CACHE_ALIGN_BUFFER(u32, cap, 2);
1295         ALLOC_CACHE_ALIGN_BUFFER(u8, usb_stor_buf, 36);
1296         u32 capacity, blksz;
1297         ccb *pccb = &usb_ccb;
1298
1299         pccb->pdata = usb_stor_buf;
1300
1301         dev_desc->target = dev->devnum;
1302         pccb->lun = dev_desc->lun;
1303         debug(" address %d\n", dev_desc->target);
1304
1305         if (usb_inquiry(pccb, ss)) {
1306                 debug("%s: usb_inquiry() failed\n", __func__);
1307                 return -1;
1308         }
1309
1310         perq = usb_stor_buf[0];
1311         modi = usb_stor_buf[1];
1312
1313         /*
1314          * Skip unknown devices (0x1f) and enclosure service devices (0x0d),
1315          * they would not respond to test_unit_ready .
1316          */
1317         if (((perq & 0x1f) == 0x1f) || ((perq & 0x1f) == 0x0d)) {
1318                 debug("%s: unknown/unsupported device\n", __func__);
1319                 return 0;
1320         }
1321         if ((modi&0x80) == 0x80) {
1322                 /* drive is removable */
1323                 dev_desc->removable = 1;
1324         }
1325         memcpy(dev_desc->vendor, (const void *)&usb_stor_buf[8], 8);
1326         memcpy(dev_desc->product, (const void *)&usb_stor_buf[16], 16);
1327         memcpy(dev_desc->revision, (const void *)&usb_stor_buf[32], 4);
1328         dev_desc->vendor[8] = 0;
1329         dev_desc->product[16] = 0;
1330         dev_desc->revision[4] = 0;
1331 #ifdef CONFIG_USB_BIN_FIXUP
1332         usb_bin_fixup(dev->descriptor, (uchar *)dev_desc->vendor,
1333                       (uchar *)dev_desc->product);
1334 #endif /* CONFIG_USB_BIN_FIXUP */
1335         debug("ISO Vers %X, Response Data %X\n", usb_stor_buf[2],
1336               usb_stor_buf[3]);
1337         if (usb_test_unit_ready(pccb, ss)) {
1338                 printf("Device NOT ready\n"
1339                        "   Request Sense returned %02X %02X %02X\n",
1340                        pccb->sense_buf[2], pccb->sense_buf[12],
1341                        pccb->sense_buf[13]);
1342                 if (dev_desc->removable == 1) {
1343                         dev_desc->type = perq;
1344                         return 1;
1345                 }
1346                 return 0;
1347         }
1348         pccb->pdata = (unsigned char *)cap;
1349         memset(pccb->pdata, 0, 8);
1350         if (usb_read_capacity(pccb, ss) != 0) {
1351                 printf("READ_CAP ERROR\n");
1352                 cap[0] = 2880;
1353                 cap[1] = 0x200;
1354         }
1355         ss->flags &= ~USB_READY;
1356         debug("Read Capacity returns: 0x%08x, 0x%08x\n", cap[0], cap[1]);
1357 #if 0
1358         if (cap[0] > (0x200000 * 10)) /* greater than 10 GByte */
1359                 cap[0] >>= 16;
1360
1361         cap[0] = cpu_to_be32(cap[0]);
1362         cap[1] = cpu_to_be32(cap[1]);
1363 #endif
1364
1365         capacity = be32_to_cpu(cap[0]) + 1;
1366         blksz = be32_to_cpu(cap[1]);
1367
1368         debug("Capacity = 0x%08x, blocksz = 0x%08x\n", capacity, blksz);
1369         dev_desc->lba = capacity;
1370         dev_desc->blksz = blksz;
1371         dev_desc->log2blksz = LOG2(dev_desc->blksz);
1372         dev_desc->type = perq;
1373         debug(" address %d\n", dev_desc->target);
1374         debug("partype: %d\n", dev_desc->part_type);
1375
1376         init_part(dev_desc);
1377
1378         debug("partype: %d\n", dev_desc->part_type);
1379         return 1;
1380 }
1381
1382 #ifdef CONFIG_DM_USB
1383
1384 static int usb_mass_storage_probe(struct udevice *dev)
1385 {
1386         struct usb_device *udev = dev_get_parent_priv(dev);
1387         int ret;
1388
1389         usb_disable_asynch(1); /* asynch transfer not allowed */
1390         ret = usb_stor_probe_device(udev);
1391         usb_disable_asynch(0); /* asynch transfer allowed */
1392
1393         return ret;
1394 }
1395
1396 static const struct udevice_id usb_mass_storage_ids[] = {
1397         { .compatible = "usb-mass-storage" },
1398         { }
1399 };
1400
1401 U_BOOT_DRIVER(usb_mass_storage) = {
1402         .name   = "usb_mass_storage",
1403         .id     = UCLASS_MASS_STORAGE,
1404         .of_match = usb_mass_storage_ids,
1405         .probe = usb_mass_storage_probe,
1406 };
1407
1408 UCLASS_DRIVER(usb_mass_storage) = {
1409         .id             = UCLASS_MASS_STORAGE,
1410         .name           = "usb_mass_storage",
1411 };
1412
1413 static const struct usb_device_id mass_storage_id_table[] = {
1414         {
1415                 .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
1416                 .bInterfaceClass = USB_CLASS_MASS_STORAGE
1417         },
1418         { }             /* Terminating entry */
1419 };
1420
1421 U_BOOT_USB_DEVICE(usb_mass_storage, mass_storage_id_table);
1422
1423 #endif