]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - doc/README-i386
post, i2c: add missing curly bracket in i2c_post_test
[karo-tx-uboot.git] / doc / README-i386
1 This is my attempt to port U-Boot to the i386 platform. This
2 work was sponsored by my emplyer, Omicron Ceti AB. http://www.omicron.se
3
4 It is currently capable of booting a linux bzImage from flash on
5 the AMD SC520 CDP platform.
6
7 It was originally based on PPCBoot taken from the CVS October 28 2002.
8
9 To compile:
10
11 1) Unpack the source tree, either from the complete tarball or
12    from the virgin snapshot + the patch
13
14 2) Configure the source
15    $ make sc520_cdp_comfig
16    $ make
17
18 To use this code on the CDP:
19 1) Make a suitable kernel, I used 2.4.19 with the mtd-support updated
20    from the MTD CVS and a patch to allow root=/dev/mtdblock1 which I
21    included at the end of this file.
22    The following options in the MTD section might be useful:
23
24    CONFIG_MTD_PHYSMAP=y
25    CONFIG_MTD_PHYSMAP_START=38100000
26    CONFIG_MTD_PHYSMAP_LEN=7a0000
27    CONFIG_MTD_PHYSMAP_BUSWIDTH=2
28
29
30 2) Program it in to the CDP flashbank with remon
31    u-boot.bin should be programmed att offset 0x7e000 and the kernel at
32    offset 0. If you want to use a jffs2 root file system (not included here),
33    it should be  programmed to offset 0x100000.
34
35    remon> z
36    remon> yi
37    remon> ns u-boot.bin 7e0000
38    remon> ns bzImage 0
39    remon> ns image.jffs2 100000
40
41 3) Connect a terminal to the 25pin serial port at 9600bps, and start the CDP.
42
43    remon> z
44    remon> g
45
46 4) U-Boot should output some message and a prompt on the terminal, to
47    start the kernel issue the following command:
48
49    BOOT> bootm
50
51 5) The kernel should boot, and mount the root filesystem if present.
52
53 We hope you find this stuff useful
54 Daniel Engström, Omicron Ceti AB, daniel@omicron.se
55
56
57 --- linux-2.4.19-orig/init/do_mounts.c  Sat Aug  3 02:39:46 2002
58 +++ linux-2.4.19/init/do_mounts.c       Mon Sep 23 16:21:33 2002
59 @@ -224,6 +224,14 @@
60         { "ftlc", 0x2c10 },
61         { "ftld", 0x2c18 },
62         { "mtdblock", 0x1f00 },
63 +       { "mtdblock0", 0x1f00 },
64 +       { "mtdblock1", 0x1f01 },
65 +       { "mtdblock2", 0x1f02 },
66 +       { "mtdblock3", 0x1f03 },
67 +       { "mtdblock4", 0x1f04 },
68 +       { "mtdblock5", 0x1f05 },
69 +       { "mtdblock6", 0x1f06 },
70 +       { "mtdblock7", 0x1f07 },
71         { NULL, 0 }
72  };
73
74 -------------------