]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/net/designware.c
Merge branch 'master' of git://git.denx.de/u-boot-blackfin
[karo-tx-uboot.git] / drivers / net / designware.c
1 /*
2  * (C) Copyright 2010
3  * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23
24 /*
25  * Designware ethernet IP driver for u-boot
26  */
27
28 #include <common.h>
29 #include <miiphy.h>
30 #include <malloc.h>
31 #include <linux/err.h>
32 #include <asm/io.h>
33 #include "designware.h"
34
35 static void tx_descs_init(struct eth_device *dev)
36 {
37         struct dw_eth_dev *priv = dev->priv;
38         struct eth_dma_regs *dma_p = priv->dma_regs_p;
39         struct dmamacdescr *desc_table_p = &priv->tx_mac_descrtable[0];
40         char *txbuffs = &priv->txbuffs[0];
41         struct dmamacdescr *desc_p;
42         u32 idx;
43
44         for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) {
45                 desc_p = &desc_table_p[idx];
46                 desc_p->dmamac_addr = &txbuffs[idx * CONFIG_ETH_BUFSIZE];
47                 desc_p->dmamac_next = &desc_table_p[idx + 1];
48
49 #if defined(CONFIG_DW_ALTDESCRIPTOR)
50                 desc_p->txrx_status &= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST |
51                                 DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \
52                                 DESC_TXSTS_TXCHECKINSCTRL | \
53                                 DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS);
54
55                 desc_p->txrx_status |= DESC_TXSTS_TXCHAIN;
56                 desc_p->dmamac_cntl = 0;
57                 desc_p->txrx_status &= ~(DESC_TXSTS_MSK | DESC_TXSTS_OWNBYDMA);
58 #else
59                 desc_p->dmamac_cntl = DESC_TXCTRL_TXCHAIN;
60                 desc_p->txrx_status = 0;
61 #endif
62         }
63
64         /* Correcting the last pointer of the chain */
65         desc_p->dmamac_next = &desc_table_p[0];
66
67         writel((ulong)&desc_table_p[0], &dma_p->txdesclistaddr);
68 }
69
70 static void rx_descs_init(struct eth_device *dev)
71 {
72         struct dw_eth_dev *priv = dev->priv;
73         struct eth_dma_regs *dma_p = priv->dma_regs_p;
74         struct dmamacdescr *desc_table_p = &priv->rx_mac_descrtable[0];
75         char *rxbuffs = &priv->rxbuffs[0];
76         struct dmamacdescr *desc_p;
77         u32 idx;
78
79         for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) {
80                 desc_p = &desc_table_p[idx];
81                 desc_p->dmamac_addr = &rxbuffs[idx * CONFIG_ETH_BUFSIZE];
82                 desc_p->dmamac_next = &desc_table_p[idx + 1];
83
84                 desc_p->dmamac_cntl =
85                         (MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) | \
86                                       DESC_RXCTRL_RXCHAIN;
87
88                 desc_p->txrx_status = DESC_RXSTS_OWNBYDMA;
89         }
90
91         /* Correcting the last pointer of the chain */
92         desc_p->dmamac_next = &desc_table_p[0];
93
94         writel((ulong)&desc_table_p[0], &dma_p->rxdesclistaddr);
95 }
96
97 static void descs_init(struct eth_device *dev)
98 {
99         tx_descs_init(dev);
100         rx_descs_init(dev);
101 }
102
103 static int mac_reset(struct eth_device *dev)
104 {
105         struct dw_eth_dev *priv = dev->priv;
106         struct eth_mac_regs *mac_p = priv->mac_regs_p;
107         struct eth_dma_regs *dma_p = priv->dma_regs_p;
108
109         int timeout = CONFIG_MACRESET_TIMEOUT;
110
111         writel(DMAMAC_SRST, &dma_p->busmode);
112         writel(MII_PORTSELECT, &mac_p->conf);
113
114         do {
115                 if (!(readl(&dma_p->busmode) & DMAMAC_SRST))
116                         return 0;
117                 udelay(1000);
118         } while (timeout--);
119
120         return -1;
121 }
122
123 static int dw_write_hwaddr(struct eth_device *dev)
124 {
125         struct dw_eth_dev *priv = dev->priv;
126         struct eth_mac_regs *mac_p = priv->mac_regs_p;
127         u32 macid_lo, macid_hi;
128         u8 *mac_id = &dev->enetaddr[0];
129
130         macid_lo = mac_id[0] + (mac_id[1] << 8) + \
131                    (mac_id[2] << 16) + (mac_id[3] << 24);
132         macid_hi = mac_id[4] + (mac_id[5] << 8);
133
134         writel(macid_hi, &mac_p->macaddr0hi);
135         writel(macid_lo, &mac_p->macaddr0lo);
136
137         return 0;
138 }
139
140 static int dw_eth_init(struct eth_device *dev, bd_t *bis)
141 {
142         struct dw_eth_dev *priv = dev->priv;
143         struct eth_mac_regs *mac_p = priv->mac_regs_p;
144         struct eth_dma_regs *dma_p = priv->dma_regs_p;
145         u32 conf;
146
147         /* Reset ethernet hardware */
148         if (mac_reset(dev) < 0)
149                 return -1;
150
151         writel(FIXEDBURST | PRIORXTX_41 | BURST_16,
152                         &dma_p->busmode);
153
154         writel(FLUSHTXFIFO | readl(&dma_p->opmode), &dma_p->opmode);
155         writel(STOREFORWARD | TXSECONDFRAME, &dma_p->opmode);
156
157         conf = FRAMEBURSTENABLE | DISABLERXOWN;
158
159         if (priv->speed != SPEED_1000M)
160                 conf |= MII_PORTSELECT;
161
162         if (priv->duplex == FULL_DUPLEX)
163                 conf |= FULLDPLXMODE;
164
165         writel(conf, &mac_p->conf);
166
167         descs_init(dev);
168
169         /*
170          * Start/Enable xfer at dma as well as mac level
171          */
172         writel(readl(&dma_p->opmode) | RXSTART, &dma_p->opmode);
173         writel(readl(&dma_p->opmode) | TXSTART, &dma_p->opmode);
174
175         writel(readl(&mac_p->conf) | RXENABLE, &mac_p->conf);
176         writel(readl(&mac_p->conf) | TXENABLE, &mac_p->conf);
177
178         return 0;
179 }
180
181 static int dw_eth_send(struct eth_device *dev, volatile void *packet,
182                 int length)
183 {
184         struct dw_eth_dev *priv = dev->priv;
185         struct eth_dma_regs *dma_p = priv->dma_regs_p;
186         u32 desc_num = priv->tx_currdescnum;
187         struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num];
188
189         /* Check if the descriptor is owned by CPU */
190         if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) {
191                 printf("CPU not owner of tx frame\n");
192                 return -1;
193         }
194
195         memcpy((void *)desc_p->dmamac_addr, (void *)packet, length);
196
197 #if defined(CONFIG_DW_ALTDESCRIPTOR)
198         desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST;
199         desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \
200                                DESC_TXCTRL_SIZE1MASK;
201
202         desc_p->txrx_status &= ~(DESC_TXSTS_MSK);
203         desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA;
204 #else
205         desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & \
206                                DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \
207                                DESC_TXCTRL_TXFIRST;
208
209         desc_p->txrx_status = DESC_TXSTS_OWNBYDMA;
210 #endif
211
212         /* Test the wrap-around condition. */
213         if (++desc_num >= CONFIG_TX_DESCR_NUM)
214                 desc_num = 0;
215
216         priv->tx_currdescnum = desc_num;
217
218         /* Start the transmission */
219         writel(POLL_DATA, &dma_p->txpolldemand);
220
221         return 0;
222 }
223
224 static int dw_eth_recv(struct eth_device *dev)
225 {
226         struct dw_eth_dev *priv = dev->priv;
227         u32 desc_num = priv->rx_currdescnum;
228         struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num];
229
230         u32 status = desc_p->txrx_status;
231         int length = 0;
232
233         /* Check  if the owner is the CPU */
234         if (!(status & DESC_RXSTS_OWNBYDMA)) {
235
236                 length = (status & DESC_RXSTS_FRMLENMSK) >> \
237                          DESC_RXSTS_FRMLENSHFT;
238
239                 NetReceive(desc_p->dmamac_addr, length);
240
241                 /*
242                  * Make the current descriptor valid again and go to
243                  * the next one
244                  */
245                 desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA;
246
247                 /* Test the wrap-around condition. */
248                 if (++desc_num >= CONFIG_RX_DESCR_NUM)
249                         desc_num = 0;
250         }
251
252         priv->rx_currdescnum = desc_num;
253
254         return length;
255 }
256
257 static void dw_eth_halt(struct eth_device *dev)
258 {
259         struct dw_eth_dev *priv = dev->priv;
260
261         mac_reset(dev);
262         priv->tx_currdescnum = priv->rx_currdescnum = 0;
263 }
264
265 static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val)
266 {
267         struct dw_eth_dev *priv = dev->priv;
268         struct eth_mac_regs *mac_p = priv->mac_regs_p;
269         u32 miiaddr;
270         int timeout = CONFIG_MDIO_TIMEOUT;
271
272         miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
273                   ((reg << MIIREGSHIFT) & MII_REGMSK);
274
275         writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
276
277         do {
278                 if (!(readl(&mac_p->miiaddr) & MII_BUSY)) {
279                         *val = readl(&mac_p->miidata);
280                         return 0;
281                 }
282                 udelay(1000);
283         } while (timeout--);
284
285         return -1;
286 }
287
288 static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val)
289 {
290         struct dw_eth_dev *priv = dev->priv;
291         struct eth_mac_regs *mac_p = priv->mac_regs_p;
292         u32 miiaddr;
293         int ret = -1, timeout = CONFIG_MDIO_TIMEOUT;
294         u16 value;
295
296         writel(val, &mac_p->miidata);
297         miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
298                   ((reg << MIIREGSHIFT) & MII_REGMSK) | MII_WRITE;
299
300         writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
301
302         do {
303                 if (!(readl(&mac_p->miiaddr) & MII_BUSY))
304                         ret = 0;
305                 udelay(1000);
306         } while (timeout--);
307
308         /* Needed as a fix for ST-Phy */
309         eth_mdio_read(dev, addr, reg, &value);
310
311         return ret;
312 }
313
314 #if defined(CONFIG_DW_SEARCH_PHY)
315 static int find_phy(struct eth_device *dev)
316 {
317         int phy_addr = 0;
318         u16 ctrl, oldctrl;
319
320         do {
321                 eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
322                 oldctrl = ctrl & BMCR_ANENABLE;
323
324                 ctrl ^= BMCR_ANENABLE;
325                 eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
326                 eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
327                 ctrl &= BMCR_ANENABLE;
328
329                 if (ctrl == oldctrl) {
330                         phy_addr++;
331                 } else {
332                         ctrl ^= BMCR_ANENABLE;
333                         eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl);
334
335                         return phy_addr;
336                 }
337         } while (phy_addr < 32);
338
339         return -1;
340 }
341 #endif
342
343 static int dw_reset_phy(struct eth_device *dev)
344 {
345         struct dw_eth_dev *priv = dev->priv;
346         u16 ctrl;
347         int timeout = CONFIG_PHYRESET_TIMEOUT;
348         u32 phy_addr = priv->address;
349
350         eth_mdio_write(dev, phy_addr, MII_BMCR, BMCR_RESET);
351         do {
352                 eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl);
353                 if (!(ctrl & BMCR_RESET))
354                         break;
355                 udelay(1000);
356         } while (timeout--);
357
358         if (timeout < 0)
359                 return -1;
360
361 #ifdef CONFIG_PHY_RESET_DELAY
362         udelay(CONFIG_PHY_RESET_DELAY);
363 #endif
364         return 0;
365 }
366
367 static int configure_phy(struct eth_device *dev)
368 {
369         struct dw_eth_dev *priv = dev->priv;
370         int phy_addr;
371         u16 bmcr;
372 #if defined(CONFIG_DW_AUTONEG)
373         u16 bmsr;
374         u32 timeout;
375         u16 anlpar, btsr;
376 #else
377         u16 ctrl;
378 #endif
379
380 #if defined(CONFIG_DW_SEARCH_PHY)
381         phy_addr = find_phy(dev);
382         if (phy_addr > 0)
383                 priv->address = phy_addr;
384         else
385                 return -1;
386 #else
387         phy_addr = priv->address;
388 #endif
389         if (dw_reset_phy(dev) < 0)
390                 return -1;
391
392 #if defined(CONFIG_DW_AUTONEG)
393         bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_SPEED100 | \
394                BMCR_FULLDPLX | BMCR_SPEED1000;
395 #else
396         bmcr = BMCR_SPEED100 | BMCR_FULLDPLX;
397
398 #if defined(CONFIG_DW_SPEED10M)
399         bmcr &= ~BMCR_SPEED100;
400 #endif
401 #if defined(CONFIG_DW_DUPLEXHALF)
402         bmcr &= ~BMCR_FULLDPLX;
403 #endif
404 #endif
405         if (eth_mdio_write(dev, phy_addr, MII_BMCR, bmcr) < 0)
406                 return -1;
407
408         /* Read the phy status register and populate priv structure */
409 #if defined(CONFIG_DW_AUTONEG)
410         timeout = CONFIG_AUTONEG_TIMEOUT;
411         do {
412                 eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr);
413                 if (bmsr & BMSR_ANEGCOMPLETE)
414                         break;
415                 udelay(1000);
416         } while (timeout--);
417
418         eth_mdio_read(dev, phy_addr, MII_LPA, &anlpar);
419         eth_mdio_read(dev, phy_addr, MII_STAT1000, &btsr);
420
421         if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
422                 priv->speed = SPEED_1000M;
423                 if (btsr & PHY_1000BTSR_1000FD)
424                         priv->duplex = FULL_DUPLEX;
425                 else
426                         priv->duplex = HALF_DUPLEX;
427         } else {
428                 if (anlpar & LPA_100)
429                         priv->speed = SPEED_100M;
430                 else
431                         priv->speed = SPEED_10M;
432
433                 if (anlpar & (LPA_10FULL | LPA_100FULL))
434                         priv->duplex = FULL_DUPLEX;
435                 else
436                         priv->duplex = HALF_DUPLEX;
437         }
438 #else
439         if (eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl) < 0)
440                 return -1;
441
442         if (ctrl & BMCR_FULLDPLX)
443                 priv->duplex = FULL_DUPLEX;
444         else
445                 priv->duplex = HALF_DUPLEX;
446
447         if (ctrl & BMCR_SPEED1000)
448                 priv->speed = SPEED_1000M;
449         else if (ctrl & BMCR_SPEED100)
450                 priv->speed = SPEED_100M;
451         else
452                 priv->speed = SPEED_10M;
453 #endif
454         return 0;
455 }
456
457 #if defined(CONFIG_MII)
458 static int dw_mii_read(const char *devname, u8 addr, u8 reg, u16 *val)
459 {
460         struct eth_device *dev;
461
462         dev = eth_get_dev_by_name(devname);
463         if (dev)
464                 eth_mdio_read(dev, addr, reg, val);
465
466         return 0;
467 }
468
469 static int dw_mii_write(const char *devname, u8 addr, u8 reg, u16 val)
470 {
471         struct eth_device *dev;
472
473         dev = eth_get_dev_by_name(devname);
474         if (dev)
475                 eth_mdio_write(dev, addr, reg, val);
476
477         return 0;
478 }
479 #endif
480
481 int designware_initialize(u32 id, ulong base_addr, u32 phy_addr)
482 {
483         struct eth_device *dev;
484         struct dw_eth_dev *priv;
485
486         dev = (struct eth_device *) malloc(sizeof(struct eth_device));
487         if (!dev)
488                 return -ENOMEM;
489
490         /*
491          * Since the priv structure contains the descriptors which need a strict
492          * buswidth alignment, memalign is used to allocate memory
493          */
494         priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev));
495         if (!priv) {
496                 free(dev);
497                 return -ENOMEM;
498         }
499
500         memset(dev, 0, sizeof(struct eth_device));
501         memset(priv, 0, sizeof(struct dw_eth_dev));
502
503         sprintf(dev->name, "mii%d", id);
504         dev->iobase = (int)base_addr;
505         dev->priv = priv;
506
507         eth_getenv_enetaddr_by_index(id, &dev->enetaddr[0]);
508
509         priv->dev = dev;
510         priv->mac_regs_p = (struct eth_mac_regs *)base_addr;
511         priv->dma_regs_p = (struct eth_dma_regs *)(base_addr +
512                         DW_DMA_BASE_OFFSET);
513         priv->address = phy_addr;
514
515         if (mac_reset(dev) < 0)
516                 return -1;
517
518         if (configure_phy(dev) < 0) {
519                 printf("Phy could not be configured\n");
520                 return -1;
521         }
522
523         dev->init = dw_eth_init;
524         dev->send = dw_eth_send;
525         dev->recv = dw_eth_recv;
526         dev->halt = dw_eth_halt;
527         dev->write_hwaddr = dw_write_hwaddr;
528
529         eth_register(dev);
530
531 #if defined(CONFIG_MII)
532         miiphy_register(dev->name, dw_mii_read, dw_mii_write);
533 #endif
534         return 1;
535 }