]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/net/xilinx_emaclite.c
net: xilinx emaclite: Fix return values
[karo-tx-uboot.git] / drivers / net / xilinx_emaclite.c
1 /*
2  * (C) Copyright 2007-2009 Michal Simek
3  * (C) Copyright 2003 Xilinx Inc.
4  *
5  * Michal SIMEK <monstr@monstr.eu>
6  *
7  * See file CREDITS for list of people who contributed to this
8  * project.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23  * MA 02111-1307 USA
24  */
25
26 #include <common.h>
27 #include <net.h>
28 #include <config.h>
29 #include <malloc.h>
30 #include <asm/io.h>
31
32 #undef DEBUG
33
34 #define ENET_MAX_MTU            PKTSIZE
35 #define ENET_MAX_MTU_ALIGNED    PKTSIZE_ALIGN
36 #define ENET_ADDR_LENGTH        6
37
38 /* EmacLite constants */
39 #define XEL_BUFFER_OFFSET       0x0800  /* Next buffer's offset */
40 #define XEL_TPLR_OFFSET         0x07F4  /* Tx packet length */
41 #define XEL_TSR_OFFSET          0x07FC  /* Tx status */
42 #define XEL_RSR_OFFSET          0x17FC  /* Rx status */
43 #define XEL_RXBUFF_OFFSET       0x1000  /* Receive Buffer */
44
45 /* Xmit complete */
46 #define XEL_TSR_XMIT_BUSY_MASK          0x00000001UL
47 /* Xmit interrupt enable bit */
48 #define XEL_TSR_XMIT_IE_MASK            0x00000008UL
49 /* Buffer is active, SW bit only */
50 #define XEL_TSR_XMIT_ACTIVE_MASK        0x80000000UL
51 /* Program the MAC address */
52 #define XEL_TSR_PROGRAM_MASK            0x00000002UL
53 /* define for programming the MAC address into the EMAC Lite */
54 #define XEL_TSR_PROG_MAC_ADDR   (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
55
56 /* Transmit packet length upper byte */
57 #define XEL_TPLR_LENGTH_MASK_HI         0x0000FF00UL
58 /* Transmit packet length lower byte */
59 #define XEL_TPLR_LENGTH_MASK_LO         0x000000FFUL
60
61 /* Recv complete */
62 #define XEL_RSR_RECV_DONE_MASK          0x00000001UL
63 /* Recv interrupt enable bit */
64 #define XEL_RSR_RECV_IE_MASK            0x00000008UL
65
66 typedef struct {
67         u32 baseaddress;        /* Base address for device (IPIF) */
68         u32 nexttxbuffertouse;  /* Next TX buffer to write to */
69         u32 nextrxbuffertouse;  /* Next RX buffer to read from */
70         uchar deviceid;         /* Unique ID of device - for future */
71 } xemaclite;
72
73 static xemaclite emaclite;
74
75 static u32 etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
76
77 static void xemaclite_alignedread (u32 *srcptr, void *destptr, u32 bytecount)
78 {
79         u32 i;
80         u32 alignbuffer;
81         u32 *to32ptr;
82         u32 *from32ptr;
83         u8 *to8ptr;
84         u8 *from8ptr;
85
86         from32ptr = (u32 *) srcptr;
87
88         /* Word aligned buffer, no correction needed. */
89         to32ptr = (u32 *) destptr;
90         while (bytecount > 3) {
91                 *to32ptr++ = *from32ptr++;
92                 bytecount -= 4;
93         }
94         to8ptr = (u8 *) to32ptr;
95
96         alignbuffer = *from32ptr++;
97         from8ptr = (u8 *) & alignbuffer;
98
99         for (i = 0; i < bytecount; i++) {
100                 *to8ptr++ = *from8ptr++;
101         }
102 }
103
104 static void xemaclite_alignedwrite (void *srcptr, u32 destptr, u32 bytecount)
105 {
106         u32 i;
107         u32 alignbuffer;
108         u32 *to32ptr = (u32 *) destptr;
109         u32 *from32ptr;
110         u8 *to8ptr;
111         u8 *from8ptr;
112
113         from32ptr = (u32 *) srcptr;
114         while (bytecount > 3) {
115
116                 *to32ptr++ = *from32ptr++;
117                 bytecount -= 4;
118         }
119
120         alignbuffer = 0;
121         to8ptr = (u8 *) & alignbuffer;
122         from8ptr = (u8 *) from32ptr;
123
124         for (i = 0; i < bytecount; i++) {
125                 *to8ptr++ = *from8ptr++;
126         }
127
128         *to32ptr++ = alignbuffer;
129 }
130
131 static void emaclite_halt(struct eth_device *dev)
132 {
133         debug ("eth_halt\n");
134 }
135
136 static int emaclite_init(struct eth_device *dev, bd_t *bis)
137 {
138         debug ("EmacLite Initialization Started\n");
139         memset (&emaclite, 0, sizeof (xemaclite));
140         emaclite.baseaddress = dev->iobase;
141
142 /*
143  * TX - TX_PING & TX_PONG initialization
144  */
145         /* Restart PING TX */
146         out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
147         /* Copy MAC address */
148         xemaclite_alignedwrite (dev->enetaddr,
149                 emaclite.baseaddress, ENET_ADDR_LENGTH);
150         /* Set the length */
151         out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
152         /* Update the MAC address in the EMAC Lite */
153         out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, XEL_TSR_PROG_MAC_ADDR);
154         /* Wait for EMAC Lite to finish with the MAC address update */
155         while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET) &
156                 XEL_TSR_PROG_MAC_ADDR) != 0) ;
157
158 #ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
159         /* The same operation with PONG TX */
160         out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
161         xemaclite_alignedwrite (dev->enetaddr, emaclite.baseaddress +
162                 XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
163         out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
164         out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
165                 XEL_TSR_PROG_MAC_ADDR);
166         while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
167                 XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) ;
168 #endif
169
170 /*
171  * RX - RX_PING & RX_PONG initialization
172  */
173         /* Write out the value to flush the RX buffer */
174         out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK);
175 #ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
176         out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,
177                 XEL_RSR_RECV_IE_MASK);
178 #endif
179
180         debug ("EmacLite Initialization complete\n");
181         return 0;
182 }
183
184 static int xemaclite_txbufferavailable (xemaclite *instanceptr)
185 {
186         u32 reg;
187         u32 txpingbusy;
188         u32 txpongbusy;
189         /*
190          * Read the other buffer register
191          * and determine if the other buffer is available
192          */
193         reg = in_be32 (instanceptr->baseaddress +
194                         instanceptr->nexttxbuffertouse + 0);
195         txpingbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
196                         XEL_TSR_XMIT_BUSY_MASK);
197
198         reg = in_be32 (instanceptr->baseaddress +
199                         (instanceptr->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0);
200         txpongbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
201                         XEL_TSR_XMIT_BUSY_MASK);
202
203         return (!(txpingbusy && txpongbusy));
204 }
205
206 static int emaclite_send (struct eth_device *dev, volatile void *ptr, int len)
207 {
208         u32 reg;
209         u32 baseaddress;
210
211         u32 maxtry = 1000;
212
213         if (len > ENET_MAX_MTU)
214                 len = ENET_MAX_MTU;
215
216         while (!xemaclite_txbufferavailable (&emaclite) && maxtry) {
217                 udelay (10);
218                 maxtry--;
219         }
220
221         if (!maxtry) {
222                 printf ("Error: Timeout waiting for ethernet TX buffer\n");
223                 /* Restart PING TX */
224                 out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
225 #ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
226                 out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
227                 XEL_BUFFER_OFFSET, 0);
228 #endif
229                 return -1;
230         }
231
232         /* Determine the expected TX buffer address */
233         baseaddress = (emaclite.baseaddress + emaclite.nexttxbuffertouse);
234
235         /* Determine if the expected buffer address is empty */
236         reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
237         if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
238                 && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
239                         & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
240
241 #ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
242                 emaclite.nexttxbuffertouse ^= XEL_BUFFER_OFFSET;
243 #endif
244                 debug ("Send packet from 0x%x\n", baseaddress);
245                 /* Write the frame to the buffer */
246                 xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
247                 out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
248                         (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
249                 reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
250                 reg |= XEL_TSR_XMIT_BUSY_MASK;
251                 if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
252                         reg |= XEL_TSR_XMIT_ACTIVE_MASK;
253                 }
254                 out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
255                 return 0;
256         }
257 #ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
258         /* Switch to second buffer */
259         baseaddress ^= XEL_BUFFER_OFFSET;
260         /* Determine if the expected buffer address is empty */
261         reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
262         if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
263                 && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
264                         & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
265                 debug ("Send packet from 0x%x\n", baseaddress);
266                 /* Write the frame to the buffer */
267                 xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
268                 out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
269                         (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
270                 reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
271                 reg |= XEL_TSR_XMIT_BUSY_MASK;
272                 if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
273                         reg |= XEL_TSR_XMIT_ACTIVE_MASK;
274                 }
275                 out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
276                 return 0;
277         }
278 #endif
279         puts ("Error while sending frame\n");
280         return -1;
281 }
282
283 static int emaclite_recv(struct eth_device *dev)
284 {
285         u32 length;
286         u32 reg;
287         u32 baseaddress;
288
289         baseaddress = emaclite.baseaddress + emaclite.nextrxbuffertouse;
290         reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
291         debug ("Testing data at address 0x%x\n", baseaddress);
292         if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
293 #ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
294                 emaclite.nextrxbuffertouse ^= XEL_BUFFER_OFFSET;
295 #endif
296         } else {
297 #ifndef CONFIG_XILINX_EMACLITE_RX_PING_PONG
298                 debug ("No data was available - address 0x%x\n", baseaddress);
299                 return 0;
300 #else
301                 baseaddress ^= XEL_BUFFER_OFFSET;
302                 reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
303                 if ((reg & XEL_RSR_RECV_DONE_MASK) !=
304                                         XEL_RSR_RECV_DONE_MASK) {
305                         debug ("No data was available - address 0x%x\n",
306                                         baseaddress);
307                         return 0;
308                 }
309 #endif
310         }
311         /* Get the length of the frame that arrived */
312         switch(((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC))) &
313                         0xFFFF0000 ) >> 16) {
314                 case 0x806:
315                         length = 42 + 20; /* FIXME size of ARP */
316                         debug ("ARP Packet\n");
317                         break;
318                 case 0x800:
319                         length = 14 + 14 +
320                         (((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0x10))) &
321                         0xFFFF0000) >> 16); /* FIXME size of IP packet */
322                         debug ("IP Packet\n");
323                         break;
324                 default:
325                         debug ("Other Packet\n");
326                         length = ENET_MAX_MTU;
327                         break;
328         }
329
330         xemaclite_alignedread ((u32 *) (baseaddress + XEL_RXBUFF_OFFSET),
331                         etherrxbuff, length);
332
333         /* Acknowledge the frame */
334         reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
335         reg &= ~XEL_RSR_RECV_DONE_MASK;
336         out_be32 (baseaddress + XEL_RSR_OFFSET, reg);
337
338         debug ("Packet receive from 0x%x, length %dB\n", baseaddress, length);
339         NetReceive ((uchar *) etherrxbuff, length);
340         return length;
341
342 }
343
344 int xilinx_emaclite_initialize (bd_t *bis, int base_addr)
345 {
346         struct eth_device *dev;
347
348         dev = malloc(sizeof(*dev));
349         if (dev == NULL)
350                 return -1;
351
352         memset(dev, 0, sizeof(*dev));
353         sprintf(dev->name, "Xilinx_Emaclite");
354
355         dev->iobase = base_addr;
356         dev->priv = 0;
357         dev->init = emaclite_init;
358         dev->halt = emaclite_halt;
359         dev->send = emaclite_send;
360         dev->recv = emaclite_recv;
361
362         eth_register(dev);
363
364         return 1;
365 }