drivers/pci/fsl_pci_init.c

   1 /*
   2  * Copyright 2007 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * Version 2 as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope that it will be useful,
   9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11  * GNU General Public License for more details.
  12  *
  13  * You should have received a copy of the GNU General Public License
  14  * along with this program; if not, write to the Free Software
  15  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  16  * MA 02111-1307 USA
  17  */
  18
  19 #include <common.h>
  20
  21 DECLARE_GLOBAL_DATA_PTR;
  22
  23 /*
  24  * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's
  25  *
  26  * Initialize controller and call the common driver/pci pci_hose_scan to
  27  * scan for bridges and devices.
  28  *
  29  * Hose fields which need to be pre-initialized by board specific code:
  30  *   regions[]
  31  *   first_busno
  32  *
  33  * Fields updated:
  34  *   last_busno
  35  */
  36
  37 #include <pci.h>
  38 #include <asm/immap_fsl_pci.h>
  39
  40 void pciauto_prescan_setup_bridge(struct pci_controller *hose,
  41                                 pci_dev_t dev, int sub_bus);
  42 void pciauto_postscan_setup_bridge(struct pci_controller *hose,
  43                                 pci_dev_t dev, int sub_bus);
  44 void pciauto_config_init(struct pci_controller *hose);
  45
  46 #ifndef CONFIG_SYS_PCI_MEMORY_BUS
  47 #define CONFIG_SYS_PCI_MEMORY_BUS 0
  48 #endif
  49
  50 #ifndef CONFIG_SYS_PCI_MEMORY_PHYS
  51 #define CONFIG_SYS_PCI_MEMORY_PHYS 0
  52 #endif
  53
  54 #if defined(CONFIG_SYS_PCI_64BIT) && !defined(CONFIG_SYS_PCI64_MEMORY_BUS)
  55 #define CONFIG_SYS_PCI64_MEMORY_BUS (64ull*1024*1024*1024)
  56 #endif
  57
  58 int fsl_pci_setup_inbound_windows(struct pci_region *r)
  59 {
  60         struct pci_region *rgn_base = r;
  61         u64 sz = min((u64)gd->ram_size, (1ull << 32) - 1);
  62
  63         phys_addr_t phys_start = CONFIG_SYS_PCI_MEMORY_PHYS;
  64         pci_addr_t bus_start = CONFIG_SYS_PCI_MEMORY_BUS;
  65         pci_size_t pci_sz = 1ull << __ilog2_u64(sz);
  66
  67         debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n",
  68                 (u64)bus_start, (u64)phys_start, (u64)pci_sz);
  69         pci_set_region(r++, bus_start, phys_start, pci_sz,
  70                         PCI_REGION_MEM | PCI_REGION_MEMORY |
  71                         PCI_REGION_PREFETCH);
  72
  73         sz -= pci_sz;
  74         bus_start += pci_sz;
  75         phys_start += pci_sz;
  76
  77         pci_sz = 1ull << __ilog2_u64(sz);
  78         if (sz) {
  79                 debug ("R1 bus_start: %llx phys_start: %llx size: %llx\n",
  80                         (u64)bus_start, (u64)phys_start, (u64)pci_sz);
  81                 pci_set_region(r++, bus_start, phys_start, pci_sz,
  82                                 PCI_REGION_MEM | PCI_REGION_MEMORY |
  83                                 PCI_REGION_PREFETCH);
  84                 sz -= pci_sz;
  85                 bus_start += pci_sz;
  86                 phys_start += pci_sz;
  87         }
  88
  89 #if defined(CONFIG_PHYS_64BIT) && defined(CONFIG_SYS_PCI_64BIT)
  90         /*
  91          * On 64-bit capable systems, set up a mapping for all of DRAM
  92          * in high pci address space.
  93          */
  94         pci_sz = 1ull << __ilog2_u64(gd->ram_size);
  95         /* round up to the next largest power of two */
  96         if (gd->ram_size > pci_sz)
  97                 pci_sz = 1ull << (__ilog2_u64(gd->ram_size) + 1);
  98         debug ("R64 bus_start: %llx phys_start: %llx size: %llx\n",
  99                 (u64)CONFIG_SYS_PCI64_MEMORY_BUS,
 100                 (u64)CONFIG_SYS_PCI_MEMORY_PHYS,
 101                 (u64)pci_sz);
 102         pci_set_region(r++,
 103                         CONFIG_SYS_PCI64_MEMORY_BUS,
 104                         CONFIG_SYS_PCI_MEMORY_PHYS,
 105                         pci_sz,
 106                         PCI_REGION_MEM | PCI_REGION_MEMORY |
 107                         PCI_REGION_PREFETCH);
 108 #else
 109         pci_sz = 1ull << __ilog2_u64(sz);
 110         if (sz) {
 111                 debug ("R2 bus_start: %llx phys_start: %llx size: %llx\n",
 112                         (u64)bus_start, (u64)phys_start, (u64)pci_sz);
 113                 pci_set_region(r++, bus_start, phys_start, pci_sz,
 114                                 PCI_REGION_MEM | PCI_REGION_MEMORY |
 115                                 PCI_REGION_PREFETCH);
 116                 sz -= pci_sz;
 117                 bus_start += pci_sz;
 118                 phys_start += pci_sz;
 119         }
 120 #endif
 121
 122 #ifdef CONFIG_PHYS_64BIT
 123         if (sz && (((u64)gd->ram_size) < (1ull << 32)))
 124                 printf("Was not able to map all of memory via "
 125                         "inbound windows -- %lld remaining\n", sz);
 126 #endif
 127
 128         return r - rgn_base;
 129 }
 130
 131 void fsl_pci_init(struct pci_controller *hose)
 132 {
 133         u16 temp16;
 134         u32 temp32;
 135         int busno = hose->first_busno;
 136         int enabled;
 137         u16 ltssm;
 138         u8 temp8;
 139         int r;
 140         int bridge;
 141         int inbound = 0;
 142         volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr;
 143         pci_dev_t dev = PCI_BDF(busno,0,0);
 144
 145         /* Initialize ATMU registers based on hose regions and flags */
 146         volatile pot_t *po = &pci->pot[1];      /* skip 0 */
 147         volatile pit_t *pi = &pci->pit[0];      /* ranges from: 3 to 1 */
 148
 149 #ifdef DEBUG
 150         int neg_link_w;
 151 #endif
 152
 153         for (r=0; r<hose->region_count; r++) {
 154                 u32 sz = (__ilog2_u64((u64)hose->regions[r].size) - 1);
 155                 if (hose->regions[r].flags & PCI_REGION_MEMORY) { /* inbound */
 156                         u32 flag = PIWAR_EN | PIWAR_LOCAL |
 157                                         PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
 158                         pi->pitar = (hose->regions[r].phys_start >> 12);
 159                         pi->piwbar = (hose->regions[r].bus_start >> 12);
 160 #ifdef CONFIG_SYS_PCI_64BIT
 161                         pi->piwbear = (hose->regions[r].bus_start >> 44);
 162 #else
 163                         pi->piwbear = 0;
 164 #endif
 165                         if (hose->regions[r].flags & PCI_REGION_PREFETCH)
 166                                 flag |= PIWAR_PF;
 167                         pi->piwar = flag | sz;
 168                         pi++;
 169                         inbound = hose->regions[r].size > 0;
 170                 } else { /* Outbound */
 171                         po->powbar = (hose->regions[r].phys_start >> 12);
 172                         po->potar = (hose->regions[r].bus_start >> 12);
 173 #ifdef CONFIG_SYS_PCI_64BIT
 174                         po->potear = (hose->regions[r].bus_start >> 44);
 175 #else
 176                         po->potear = 0;
 177 #endif
 178                         if (hose->regions[r].flags & PCI_REGION_IO)
 179                                 po->powar = POWAR_EN | sz |
 180                                         POWAR_IO_READ | POWAR_IO_WRITE;
 181                         else
 182                                 po->powar = POWAR_EN | sz |
 183                                         POWAR_MEM_READ | POWAR_MEM_WRITE;
 184                         po++;
 185                 }
 186         }
 187
 188         pci_register_hose(hose);
 189         pciauto_config_init(hose);      /* grab pci_{mem,prefetch,io} */
 190         hose->current_busno = hose->first_busno;
 191
 192         pci->pedr = 0xffffffff;         /* Clear any errors */
 193         pci->peer = ~0x20140;           /* Enable All Error Interupts except
 194                                          * - Master abort (pci)
 195                                          * - Master PERR (pci)
 196                                          * - ICCA (PCIe)
 197                                          */
 198         pci_hose_read_config_dword (hose, dev, PCI_DCR, &temp32);
 199         temp32 |= 0xf000e;              /* set URR, FER, NFER (but not CER) */
 200         pci_hose_write_config_dword(hose, dev, PCI_DCR, temp32);
 201
 202         pci_hose_read_config_byte (hose, dev, PCI_HEADER_TYPE, &temp8);
 203         bridge = temp8 & PCI_HEADER_TYPE_BRIDGE; /* Bridge, such as pcie */
 204
 205         if ( bridge ) {
 206
 207                 pci_hose_read_config_word(hose, dev, PCI_LTSSM, &ltssm);
 208                 enabled = ltssm >= PCI_LTSSM_L0;
 209
 210 #ifdef CONFIG_FSL_PCIE_RESET
 211                 if (ltssm == 1) {
 212                         int i;
 213                         debug("....PCIe link error. "
 214                               "LTSSM=0x%02x.", ltssm);
 215                         pci->pdb_stat |= 0x08000000; /* assert PCIe reset */
 216                         temp32 = pci->pdb_stat;
 217                         udelay(100);
 218                         debug("  Asserting PCIe reset @%x = %x\n",
 219                               &pci->pdb_stat, pci->pdb_stat);
 220                         pci->pdb_stat &= ~0x08000000; /* clear reset */
 221                         asm("sync;isync");
 222                         for (i=0; i<100 && ltssm < PCI_LTSSM_L0; i++) {
 223                                 pci_hose_read_config_word(hose, dev, PCI_LTSSM,
 224                                                         &ltssm);
 225                                 udelay(1000);
 226                                 debug("....PCIe link error. "
 227                                       "LTSSM=0x%02x.\n", ltssm);
 228                         }
 229                         enabled = ltssm >= PCI_LTSSM_L0;
 230                 }
 231 #endif
 232
 233                 if (!enabled) {
 234                         debug("....PCIE link error.  Skipping scan."
 235                               "LTSSM=0x%02x\n", ltssm);
 236                         hose->last_busno = hose->first_busno;
 237                         return;
 238                 }
 239
 240                 pci->pme_msg_det = 0xffffffff;
 241                 pci->pme_msg_int_en = 0xffffffff;
 242 #ifdef DEBUG
 243                 pci_hose_read_config_word(hose, dev, PCI_LSR, &temp16);
 244                 neg_link_w = (temp16 & 0x3f0 ) >> 4;
 245                 printf("...PCIE LTSSM=0x%x, Negotiated link width=%d\n",
 246                       ltssm, neg_link_w);
 247 #endif
 248                 hose->current_busno++; /* Start scan with secondary */
 249                 pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
 250
 251         }
 252
 253         /* Use generic setup_device to initialize standard pci regs,
 254          * but do not allocate any windows since any BAR found (such
 255          * as PCSRBAR) is not in this cpu's memory space.
 256          */
 257
 258         pciauto_setup_device(hose, dev, 0, hose->pci_mem,
 259                              hose->pci_prefetch, hose->pci_io);
 260
 261         if (inbound) {
 262                 pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16);
 263                 pci_hose_write_config_word(hose, dev, PCI_COMMAND,
 264                                            temp16 | PCI_COMMAND_MEMORY);
 265         }
 266
 267 #ifndef CONFIG_PCI_NOSCAN
 268         pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &temp8);
 269
 270         /* Programming Interface (PCI_CLASS_PROG)
 271          * 0 == pci host or pcie root-complex,
 272          * 1 == pci agent or pcie end-point
 273          */
 274         if (!temp8) {
 275                 printf("               Scanning PCI bus %02x\n",
 276                         hose->current_busno);
 277                 hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno);
 278         } else {
 279                 debug("               Not scanning PCI bus %02x. PI=%x\n",
 280                         hose->current_busno, temp8);
 281                 hose->last_busno = hose->current_busno;
 282         }
 283
 284         if ( bridge ) { /* update limit regs and subordinate busno */
 285                 pciauto_postscan_setup_bridge(hose, dev, hose->last_busno);
 286         }
 287 #else
 288         hose->last_busno = hose->current_busno;
 289 #endif
 290
 291         /* Clear all error indications */
 292
 293         if (bridge)
 294                 pci->pme_msg_det = 0xffffffff;
 295         pci->pedr = 0xffffffff;
 296
 297         pci_hose_read_config_word (hose, dev, PCI_DSR, &temp16);
 298         if (temp16) {
 299                 pci_hose_write_config_word(hose, dev,
 300                                         PCI_DSR, 0xffff);
 301         }
 302
 303         pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16);
 304         if (temp16) {
 305                 pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff);
 306         }
 307 }
 308
 309 #ifdef CONFIG_OF_BOARD_SETUP
 310 #include <libfdt.h>
 311 #include <fdt_support.h>
 312
 313 void ft_fsl_pci_setup(void *blob, const char *pci_alias,
 314                         struct pci_controller *hose)
 315 {
 316         int off = fdt_path_offset(blob, pci_alias);
 317
 318         if (off >= 0) {
 319                 u32 bus_range[2];
 320
 321                 bus_range[0] = 0;
 322                 bus_range[1] = hose->last_busno - hose->first_busno;
 323                 fdt_setprop(blob, off, "bus-range", &bus_range[0], 2*4);
 324                 fdt_pci_dma_ranges(blob, off, hose);
 325         }
 326 }
 327 #endif