]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/usb/host/ehci-pci.c
karo: fdt: fix panel-dpi support
[karo-tx-uboot.git] / drivers / usb / host / ehci-pci.c
1 /*-
2  * Copyright (c) 2007-2008, Juniper Networks, Inc.
3  * All rights reserved.
4  *
5  * SPDX-License-Identifier:     GPL-2.0
6  */
7
8 #include <common.h>
9 #include <dm.h>
10 #include <errno.h>
11 #include <pci.h>
12 #include <usb.h>
13
14 #include "ehci.h"
15
16 /* Information about a USB port */
17 struct ehci_pci_priv {
18         struct ehci_ctrl ehci;
19 };
20
21 static void ehci_pci_common_init(pci_dev_t pdev, struct ehci_hccr **ret_hccr,
22                                  struct ehci_hcor **ret_hcor)
23 {
24         struct ehci_hccr *hccr;
25         struct ehci_hcor *hcor;
26         uint32_t cmd;
27
28         hccr = (struct ehci_hccr *)pci_map_bar(pdev,
29                         PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
30         hcor = (struct ehci_hcor *)((uint32_t) hccr +
31                         HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
32
33         debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n",
34               (uint32_t)hccr, (uint32_t)hcor,
35               (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
36
37         *ret_hccr = hccr;
38         *ret_hcor = hcor;
39
40         /* enable busmaster */
41         pci_read_config_dword(pdev, PCI_COMMAND, &cmd);
42         cmd |= PCI_COMMAND_MASTER;
43         pci_write_config_dword(pdev, PCI_COMMAND, cmd);
44 }
45
46 #ifndef CONFIG_DM_USB
47
48 #ifdef CONFIG_PCI_EHCI_DEVICE
49 static struct pci_device_id ehci_pci_ids[] = {
50         /* Please add supported PCI EHCI controller ids here */
51         {0x1033, 0x00E0},       /* NEC */
52         {0x10B9, 0x5239},       /* ULI1575 PCI EHCI module ids */
53         {0x12D8, 0x400F},       /* Pericom */
54         {0, 0}
55 };
56 #endif
57
58 /*
59  * Create the appropriate control structures to manage
60  * a new EHCI host controller.
61  */
62 int ehci_hcd_init(int index, enum usb_init_type init,
63                 struct ehci_hccr **ret_hccr, struct ehci_hcor **ret_hcor)
64 {
65         pci_dev_t pdev;
66
67 #ifdef CONFIG_PCI_EHCI_DEVICE
68         pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE);
69 #else
70         pdev = pci_find_class(PCI_CLASS_SERIAL_USB_EHCI, index);
71 #endif
72         if (pdev < 0) {
73                 printf("EHCI host controller not found\n");
74                 return -1;
75         }
76         ehci_pci_common_init(pdev, ret_hccr, ret_hcor);
77
78         return 0;
79 }
80
81 /*
82  * Destroy the appropriate control structures corresponding
83  * the the EHCI host controller.
84  */
85 int ehci_hcd_stop(int index)
86 {
87         return 0;
88 }
89 #endif /* nCONFIG_DM_USB */
90
91 #ifdef CONFIG_DM_USB
92 static int ehci_pci_probe(struct udevice *dev)
93 {
94         struct ehci_hccr *hccr;
95         struct ehci_hcor *hcor;
96
97         ehci_pci_common_init(pci_get_bdf(dev), &hccr, &hcor);
98
99         return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST);
100 }
101
102 static int ehci_pci_remove(struct udevice *dev)
103 {
104         int ret;
105
106         ret = ehci_deregister(dev);
107         if (ret)
108                 return ret;
109
110         return 0;
111 }
112
113 U_BOOT_DRIVER(ehci_pci) = {
114         .name   = "ehci_pci",
115         .id     = UCLASS_USB,
116         .probe = ehci_pci_probe,
117         .remove = ehci_pci_remove,
118         .ops    = &ehci_usb_ops,
119         .platdata_auto_alloc_size = sizeof(struct usb_platdata),
120         .priv_auto_alloc_size = sizeof(struct ehci_pci_priv),
121         .flags  = DM_FLAG_ALLOC_PRIV_DMA,
122 };
123
124 static struct pci_device_id ehci_pci_supported[] = {
125         { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0) },
126         {},
127 };
128
129 U_BOOT_PCI_DEVICE(ehci_pci, ehci_pci_supported);
130
131 #endif /* CONFIG_DM_USB */