include/configs/MPC8313ERDB.h

   1 /*
   2  * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22 /*
  23  * mpc8313epb board configuration file
  24  */
  25
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 /*
  30  * High Level Configuration Options
  31  */
  32 #define CONFIG_E300             1
  33 #define CONFIG_MPC83xx          1
  34 #define CONFIG_MPC831x          1
  35 #define CONFIG_MPC8313          1
  36 #define CONFIG_MPC8313ERDB      1
  37
  38 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
  39 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
  40 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
  41 #define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
  42 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
  43 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
  44
  45 #ifdef CONFIG_NAND_U_BOOT
  46 #define CONFIG_SYS_TEXT_BASE    0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
  47 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
  48 #ifdef CONFIG_NAND_SPL
  49 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
  50 #endif /* CONFIG_NAND_SPL */
  51 #endif /* CONFIG_NAND_U_BOOT */
  52
  53 #ifndef CONFIG_SYS_TEXT_BASE
  54 #define CONFIG_SYS_TEXT_BASE    0xFE000000
  55 #endif
  56
  57 #ifndef CONFIG_SYS_MONITOR_BASE
  58 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  59 #endif
  60
  61 #define CONFIG_PCI
  62 #define CONFIG_FSL_ELBC 1
  63
  64 #define CONFIG_MISC_INIT_R
  65
  66 /*
  67  * On-board devices
  68  *
  69  * TSEC1 is VSC switch
  70  * TSEC2 is SoC TSEC
  71  */
  72 #define CONFIG_VSC7385_ENET
  73 #define CONFIG_TSEC2
  74
  75 #ifdef CONFIG_SYS_66MHZ
  76 #define CONFIG_83XX_CLKIN       66666667        /* in Hz */
  77 #elif defined(CONFIG_SYS_33MHZ)
  78 #define CONFIG_83XX_CLKIN       33333333        /* in Hz */
  79 #else
  80 #error Unknown oscillator frequency.
  81 #endif
  82
  83 #define CONFIG_SYS_CLK_FREQ     CONFIG_83XX_CLKIN
  84
  85 #define CONFIG_BOARD_EARLY_INIT_F               /* call board_pre_init */
  86
  87 #define CONFIG_SYS_IMMR         0xE0000000
  88
  89 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
  90 #define CONFIG_DEFAULT_IMMR     CONFIG_SYS_IMMR
  91 #endif
  92
  93 #define CONFIG_SYS_MEMTEST_START        0x00001000
  94 #define CONFIG_SYS_MEMTEST_END          0x07f00000
  95
  96 /* Early revs of this board will lock up hard when attempting
  97  * to access the PMC registers, unless a JTAG debugger is
  98  * connected, or some resistor modifications are made.
  99  */
 100 #define CONFIG_SYS_8313ERDB_BROKEN_PMC 1
 101
 102 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth (0-3) */
 103 #define CONFIG_SYS_ACR_RPTCNT           3       /* Arbiter repeat count (0-7) */
 104
 105 /*
 106  * Device configurations
 107  */
 108
 109 /* Vitesse 7385 */
 110
 111 #ifdef CONFIG_VSC7385_ENET
 112
 113 #define CONFIG_TSEC1
 114
 115 /* The flash address and size of the VSC7385 firmware image */
 116 #define CONFIG_VSC7385_IMAGE            0xFE7FE000
 117 #define CONFIG_VSC7385_IMAGE_SIZE       8192
 118
 119 #endif
 120
 121 /*
 122  * DDR Setup
 123  */
 124 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory*/
 125 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 126 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 127
 128 /*
 129  * Manually set up DDR parameters, as this board does not
 130  * seem to have the SPD connected to I2C.
 131  */
 132 #define CONFIG_SYS_DDR_SIZE     128             /* MB */
 133 #define CONFIG_SYS_DDR_CONFIG   (CSCONFIG_EN \
 134                                 | 0x00010000    /* TODO */ \
 135                                 | CSCONFIG_ROW_BIT_13 \
 136                                 | CSCONFIG_COL_BIT_10)
 137                                 /* 0x80010102 */
 138
 139 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 140 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
 141                                 | (0 << TIMING_CFG0_WRT_SHIFT) \
 142                                 | (0 << TIMING_CFG0_RRT_SHIFT) \
 143                                 | (0 << TIMING_CFG0_WWT_SHIFT) \
 144                                 | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
 145                                 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
 146                                 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
 147                                 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
 148                                 /* 0x00220802 */
 149 #define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
 150                                 | (8 << TIMING_CFG1_ACTTOPRE_SHIFT) \
 151                                 | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
 152                                 | (5 << TIMING_CFG1_CASLAT_SHIFT) \
 153                                 | (10 << TIMING_CFG1_REFREC_SHIFT) \
 154                                 | (3 << TIMING_CFG1_WRREC_SHIFT) \
 155                                 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
 156                                 | (2 << TIMING_CFG1_WRTORD_SHIFT))
 157                                 /* 0x3835a322 */
 158 #define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
 159                                 | (5 << TIMING_CFG2_CPO_SHIFT) \
 160                                 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
 161                                 | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
 162                                 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
 163                                 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
 164                                 | (6 << TIMING_CFG2_FOUR_ACT_SHIFT))
 165                                 /* 0x129048c6 */ /* P9-45,may need tuning */
 166 #define CONFIG_SYS_DDR_INTERVAL ((1296 << SDRAM_INTERVAL_REFINT_SHIFT) \
 167                                 | (1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 168                                 /* 0x05100500 */
 169 #if defined(CONFIG_DDR_2T_TIMING)
 170 #define CONFIG_SYS_SDRAM_CFG    (SDRAM_CFG_SREN \
 171                                 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 172                                 | SDRAM_CFG_2T_EN \
 173                                 | SDRAM_CFG_DBW_32)
 174 #else
 175 #define CONFIG_SYS_SDRAM_CFG    (SDRAM_CFG_SREN \
 176                                 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 177                                 | SDRAM_CFG_32_BE)
 178                                 /* 0x43080000 */
 179 #endif
 180 #define CONFIG_SYS_SDRAM_CFG2           0x00401000
 181 /* set burst length to 8 for 32-bit data path */
 182 #define CONFIG_SYS_DDR_MODE     ((0x4448 << SDRAM_MODE_ESD_SHIFT) \
 183                                 | (0x0632 << SDRAM_MODE_SD_SHIFT))
 184                                 /* 0x44480632 */
 185 #define CONFIG_SYS_DDR_MODE_2   0x8000C000
 186
 187 #define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 188                                 /*0x02000000*/
 189 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
 190                                 | DDRCDR_PZ_NOMZ \
 191                                 | DDRCDR_NZ_NOMZ \
 192                                 | DDRCDR_M_ODR)
 193
 194 /*
 195  * FLASH on the Local Bus
 196  */
 197 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 198 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
 199 #define CONFIG_SYS_FLASH_BASE           0xFE000000      /* start of FLASH   */
 200 #define CONFIG_SYS_FLASH_SIZE           8       /* flash size in MB */
 201 #define CONFIG_SYS_FLASH_PROTECTION     1       /* Use h/w Flash protection. */
 202 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* display empty sectors */
 203 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* buffer up multiple bytes */
 204
 205 #define CONFIG_SYS_NOR_BR_PRELIM        (CONFIG_SYS_FLASH_BASE \
 206                                 | (2 << BR_PS_SHIFT)    /* 16 bit port */ \
 207                                 | BR_V)                 /* valid */
 208 #define CONFIG_SYS_NOR_OR_PRELIM        (0xFF800000     /* 8 MByte */ \
 209                                 | OR_GPCM_XACS \
 210                                 | OR_GPCM_SCY_9 \
 211                                 | OR_GPCM_EHTR \
 212                                 | OR_GPCM_EAD)
 213                                 /* 0xFF006FF7   TODO SLOW 16 MB flash size */
 214                                         /* window base at flash base */
 215 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 216 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x80000017      /* 16 MB window size */
 217
 218 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 219 #define CONFIG_SYS_MAX_FLASH_SECT       135     /* sectors per device */
 220
 221 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 222 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 223
 224 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && \
 225         !defined(CONFIG_NAND_SPL)
 226 #define CONFIG_SYS_RAMBOOT
 227 #endif
 228
 229 #define CONFIG_SYS_INIT_RAM_LOCK        1
 230 #define CONFIG_SYS_INIT_RAM_ADDR        0xFD000000      /* Initial RAM addr */
 231 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000  /* Size of used area in RAM*/
 232
 233 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 234                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 235 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 236
 237 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 238 #define CONFIG_SYS_MONITOR_LEN  (384 * 1024)    /* Reserve 384 kB for Mon */
 239 #define CONFIG_SYS_MALLOC_LEN   (512 * 1024)    /* Reserved for malloc */
 240
 241 /*
 242  * Local Bus LCRR and LBCR regs
 243  */
 244 #define CONFIG_SYS_LCRR_EADC    LCRR_EADC_1
 245 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 246 #define CONFIG_SYS_LBC_LBCR     (0x00040000 /* TODO */ \
 247                                 | (0xFF << LBCR_BMT_SHIFT) \
 248                                 | 0xF)  /* 0x0004ff0f */
 249
 250                                 /* LB refresh timer prescal, 266MHz/32 */
 251 #define CONFIG_SYS_LBC_MRTPR    0x20000000  /*TODO */
 252
 253 /* drivers/mtd/nand/nand.c */
 254 #ifdef CONFIG_NAND_SPL
 255 #define CONFIG_SYS_NAND_BASE            0xFFF00000
 256 #else
 257 #define CONFIG_SYS_NAND_BASE            0xE2800000
 258 #endif
 259
 260 #define CONFIG_MTD_DEVICE
 261 #define CONFIG_MTD_PARTITION
 262 #define CONFIG_CMD_MTDPARTS
 263 #define MTDIDS_DEFAULT                  "nand0=e2800000.flash"
 264 #define MTDPARTS_DEFAULT                \
 265         "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
 266
 267 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 268 #define CONFIG_MTD_NAND_VERIFY_WRITE
 269 #define CONFIG_CMD_NAND 1
 270 #define CONFIG_NAND_FSL_ELBC 1
 271 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
 272
 273
 274 #define CONFIG_SYS_NAND_BR_PRELIM       (CONFIG_SYS_NAND_BASE \
 275                                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 276                                 | BR_PS_8               /* 8 bit port */ \
 277                                 | BR_MS_FCM             /* MSEL = FCM */ \
 278                                 | BR_V)                 /* valid */
 279 #define CONFIG_SYS_NAND_OR_PRELIM       (0xFFFF8000     /* length 32K */ \
 280                                 | OR_FCM_CSCT \
 281                                 | OR_FCM_CST \
 282                                 | OR_FCM_CHT \
 283                                 | OR_FCM_SCY_1 \
 284                                 | OR_FCM_TRLX \
 285                                 | OR_FCM_EHTR)
 286                                 /* 0xFFFF8396 */
 287
 288 #ifdef CONFIG_NAND_U_BOOT
 289 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 290 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 291 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 292 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 293 #else
 294 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 295 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 296 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 297 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
 298 #endif
 299
 300 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_NAND_BASE
 301 #define CONFIG_SYS_LBLAWAR1_PRELIM      0x8000000E      /* 32KB  */
 302
 303 #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
 304 #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
 305
 306 /* local bus read write buffer mapping */
 307 #define CONFIG_SYS_BR3_PRELIM           0xFA000801      /* map at 0xFA000000 */
 308 #define CONFIG_SYS_OR3_PRELIM           0xFFFF8FF7      /* 32kB */
 309 #define CONFIG_SYS_LBLAWBAR3_PRELIM     0xFA000000
 310 #define CONFIG_SYS_LBLAWAR3_PRELIM      0x8000000E      /* 32KB  */
 311
 312 /* Vitesse 7385 */
 313
 314 #define CONFIG_SYS_VSC7385_BASE 0xF0000000
 315
 316 #ifdef CONFIG_VSC7385_ENET
 317
 318                                         /* VSC7385 Base address */
 319 #define CONFIG_SYS_BR2_PRELIM           0xf0000801
 320                                         /* VSC7385, 128K bytes*/
 321 #define CONFIG_SYS_OR2_PRELIM           0xfffe09ff
 322                                         /* Access window base at VSC7385 base */
 323 #define CONFIG_SYS_LBLAWBAR2_PRELIM     CONFIG_SYS_VSC7385_BASE
 324                                         /* Access window size 128K */
 325 #define CONFIG_SYS_LBLAWAR2_PRELIM      0x80000010
 326
 327 #endif
 328
 329 /* pass open firmware flat tree */
 330 #define CONFIG_OF_LIBFDT        1
 331 #define CONFIG_OF_BOARD_SETUP   1
 332 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 333
 334 /*
 335  * Serial Port
 336  */
 337 #define CONFIG_CONS_INDEX       1
 338 #define CONFIG_SYS_NS16550
 339 #define CONFIG_SYS_NS16550_SERIAL
 340 #define CONFIG_SYS_NS16550_REG_SIZE     1
 341
 342 #define CONFIG_SYS_BAUDRATE_TABLE       \
 343         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 344
 345 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 346 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 347
 348 /* Use the HUSH parser */
 349 #define CONFIG_SYS_HUSH_PARSER
 350 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 351
 352 /* I2C */
 353 #define CONFIG_HARD_I2C                 /* I2C with hardware support*/
 354 #define CONFIG_FSL_I2C
 355 #define CONFIG_I2C_MULTI_BUS
 356 #define CONFIG_SYS_I2C_SPEED    400000  /* I2C speed and slave address */
 357 #define CONFIG_SYS_I2C_SLAVE    0x7F
 358 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } /* Don't probe these addrs */
 359 #define CONFIG_SYS_I2C_OFFSET   0x3000
 360 #define CONFIG_SYS_I2C2_OFFSET  0x3100
 361
 362 /*
 363  * General PCI
 364  * Addresses are mapped 1-1.
 365  */
 366 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 367 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 368 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 369 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 370 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 371 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 372 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000
 373 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
 374 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000      /* 1M */
 375
 376 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 377 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057   /* Motorola */
 378
 379 /*
 380  * TSEC
 381  */
 382 #define CONFIG_TSEC_ENET                /* TSEC ethernet support */
 383
 384 #define CONFIG_GMII                     /* MII PHY management */
 385
 386 #ifdef CONFIG_TSEC1
 387 #define CONFIG_HAS_ETH0
 388 #define CONFIG_TSEC1_NAME       "TSEC0"
 389 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 390 #define TSEC1_PHY_ADDR          0x1c
 391 #define TSEC1_FLAGS             TSEC_GIGABIT
 392 #define TSEC1_PHYIDX            0
 393 #endif
 394
 395 #ifdef CONFIG_TSEC2
 396 #define CONFIG_HAS_ETH1
 397 #define CONFIG_TSEC2_NAME       "TSEC1"
 398 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 399 #define TSEC2_PHY_ADDR          4
 400 #define TSEC2_FLAGS             TSEC_GIGABIT
 401 #define TSEC2_PHYIDX            0
 402 #endif
 403
 404
 405 /* Options are: TSEC[0-1] */
 406 #define CONFIG_ETHPRIME                 "TSEC1"
 407
 408 /*
 409  * Configure on-board RTC
 410  */
 411 #define CONFIG_RTC_DS1337
 412 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 413
 414 /*
 415  * Environment
 416  */
 417 #if defined(CONFIG_NAND_U_BOOT)
 418         #define CONFIG_ENV_IS_IN_NAND   1
 419         #define CONFIG_ENV_OFFSET               (512 * 1024)
 420         #define CONFIG_ENV_SECT_SIZE    CONFIG_SYS_NAND_BLOCK_SIZE
 421         #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 422         #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 423         #define CONFIG_ENV_RANGE                (CONFIG_ENV_SECT_SIZE * 4)
 424         #define CONFIG_ENV_OFFSET_REDUND        \
 425                                         (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 426 #elif !defined(CONFIG_SYS_RAMBOOT)
 427         #define CONFIG_ENV_IS_IN_FLASH  1
 428         #define CONFIG_ENV_ADDR         \
 429                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 430         #define CONFIG_ENV_SECT_SIZE    0x10000 /* 64K(one sector) for env */
 431         #define CONFIG_ENV_SIZE         0x2000
 432
 433 /* Address and size of Redundant Environment Sector */
 434 #else
 435         #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 436         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 437         #define CONFIG_ENV_SIZE         0x2000
 438 #endif
 439
 440 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 441 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 442
 443 /*
 444  * BOOTP options
 445  */
 446 #define CONFIG_BOOTP_BOOTFILESIZE
 447 #define CONFIG_BOOTP_BOOTPATH
 448 #define CONFIG_BOOTP_GATEWAY
 449 #define CONFIG_BOOTP_HOSTNAME
 450
 451
 452 /*
 453  * Command line configuration.
 454  */
 455 #include <config_cmd_default.h>
 456
 457 #define CONFIG_CMD_PING
 458 #define CONFIG_CMD_DHCP
 459 #define CONFIG_CMD_I2C
 460 #define CONFIG_CMD_MII
 461 #define CONFIG_CMD_DATE
 462 #define CONFIG_CMD_PCI
 463
 464 #if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
 465     #undef CONFIG_CMD_SAVEENV
 466     #undef CONFIG_CMD_LOADS
 467 #endif
 468
 469 #define CONFIG_CMDLINE_EDITING 1
 470 #define CONFIG_AUTO_COMPLETE    /* add autocompletion support   */
 471
 472 /*
 473  * Miscellaneous configurable options
 474  */
 475 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 476 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 477 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 478 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 479
 480                                                 /* Print Buffer Size */
 481 #define CONFIG_SYS_PBSIZE       \
 482                         (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 483 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 484                                 /* Boot Argument Buffer Size */
 485 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 486 #define CONFIG_SYS_HZ           1000    /* decrementer freq: 1ms ticks */
 487
 488 /*
 489  * For booting Linux, the board info and command line data
 490  * have to be in the first 256 MB of memory, since this is
 491  * the maximum mapped by the Linux kernel during initialization.
 492  */
 493                                 /* Initial Memory map for Linux*/
 494 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)
 495
 496 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000      /* PCIHOST  */
 497
 498 #ifdef CONFIG_SYS_66MHZ
 499
 500 /* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */
 501 /* 0x62040000 */
 502 #define CONFIG_SYS_HRCW_LOW (\
 503         0x20000000 /* reserved, must be set */ |\
 504         HRCWL_DDRCM |\
 505         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 506         HRCWL_DDR_TO_SCB_CLK_2X1 |\
 507         HRCWL_CSB_TO_CLKIN_2X1 |\
 508         HRCWL_CORE_TO_CSB_2X1)
 509
 510 #define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
 511
 512 #elif defined(CONFIG_SYS_33MHZ)
 513
 514 /* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */
 515 /* 0x65040000 */
 516 #define CONFIG_SYS_HRCW_LOW (\
 517         0x20000000 /* reserved, must be set */ |\
 518         HRCWL_DDRCM |\
 519         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 520         HRCWL_DDR_TO_SCB_CLK_2X1 |\
 521         HRCWL_CSB_TO_CLKIN_5X1 |\
 522         HRCWL_CORE_TO_CSB_2X1)
 523
 524 #define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 5)
 525
 526 #endif
 527
 528 #define CONFIG_SYS_HRCW_HIGH_BASE (\
 529         HRCWH_PCI_HOST |\
 530         HRCWH_PCI1_ARBITER_ENABLE |\
 531         HRCWH_CORE_ENABLE |\
 532         HRCWH_BOOTSEQ_DISABLE |\
 533         HRCWH_SW_WATCHDOG_DISABLE |\
 534         HRCWH_TSEC1M_IN_RGMII |\
 535         HRCWH_TSEC2M_IN_RGMII |\
 536         HRCWH_BIG_ENDIAN)
 537
 538 #ifdef CONFIG_NAND_SPL
 539 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
 540                        HRCWH_FROM_0XFFF00100 |\
 541                        HRCWH_ROM_LOC_NAND_SP_8BIT |\
 542                        HRCWH_RL_EXT_NAND)
 543 #else
 544 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\
 545                        HRCWH_FROM_0X00000100 |\
 546                        HRCWH_ROM_LOC_LOCAL_16BIT |\
 547                        HRCWH_RL_EXT_LEGACY)
 548 #endif
 549
 550 /* System IO Config */
 551 #define CONFIG_SYS_SICRH        (SICRH_TSOBI1 | SICRH_TSOBI2)   /* RGMII */
 552 #define CONFIG_SYS_SICRL        SICRL_USBDR_10  /* Enable Internal USB Phy  */
 553
 554 #define CONFIG_SYS_HID0_INIT    0x000000000
 555 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
 556                                  HID0_ENABLE_INSTRUCTION_CACHE | \
 557                                  HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
 558
 559 #define CONFIG_SYS_HID2 HID2_HBE
 560
 561 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 562
 563 /* DDR @ 0x00000000 */
 564 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10)
 565 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE \
 566                                 | BATU_BL_256M \
 567                                 | BATU_VS \
 568                                 | BATU_VP)
 569
 570 /* PCI @ 0x80000000 */
 571 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10)
 572 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE \
 573                                 | BATU_BL_256M \
 574                                 | BATU_VS \
 575                                 | BATU_VP)
 576 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE \
 577                                 | BATL_PP_10 \
 578                                 | BATL_CACHEINHIBIT \
 579                                 | BATL_GUARDEDSTORAGE)
 580 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE \
 581                                 | BATU_BL_256M \
 582                                 | BATU_VS \
 583                                 | BATU_VP)
 584
 585 /* PCI2 not supported on 8313 */
 586 #define CONFIG_SYS_IBAT3L       (0)
 587 #define CONFIG_SYS_IBAT3U       (0)
 588 #define CONFIG_SYS_IBAT4L       (0)
 589 #define CONFIG_SYS_IBAT4U       (0)
 590
 591 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
 592 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR \
 593                                 | BATL_PP_10 \
 594                                 | BATL_CACHEINHIBIT \
 595                                 | BATL_GUARDEDSTORAGE)
 596 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR \
 597                                 | BATU_BL_256M \
 598                                 | BATU_VS \
 599                                 | BATU_VP)
 600
 601 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 602 #define CONFIG_SYS_IBAT6L       (0xF0000000 | BATL_PP_10 | BATL_GUARDEDSTORAGE)
 603 #define CONFIG_SYS_IBAT6U       (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 604
 605 #define CONFIG_SYS_IBAT7L       (0)
 606 #define CONFIG_SYS_IBAT7U       (0)
 607
 608 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 609 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 610 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 611 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 612 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 613 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 614 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 615 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 616 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 617 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 618 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 619 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 620 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 621 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 622 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 623 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 624
 625 /*
 626  * Environment Configuration
 627  */
 628 #define CONFIG_ENV_OVERWRITE
 629
 630 #define CONFIG_NETDEV           "eth1"
 631
 632 #define CONFIG_HOSTNAME         mpc8313erdb
 633 #define CONFIG_ROOTPATH         "/nfs/root/path"
 634 #define CONFIG_BOOTFILE         "uImage"
 635                                 /* U-Boot image on TFTP server */
 636 #define CONFIG_UBOOTPATH        "u-boot.bin"
 637 #define CONFIG_FDTFILE          "mpc8313erdb.dtb"
 638
 639                                 /* default location for tftp and bootm */
 640 #define CONFIG_LOADADDR         800000
 641 #define CONFIG_BOOTDELAY        6       /* -1 disables auto-boot */
 642 #define CONFIG_BAUDRATE         115200
 643
 644 #define XMK_STR(x)      #x
 645 #define MK_STR(x)       XMK_STR(x)
 646
 647 #define CONFIG_EXTRA_ENV_SETTINGS \
 648         "netdev=" CONFIG_NETDEV "\0"                                    \
 649         "ethprime=TSEC1\0"                                              \
 650         "uboot=" CONFIG_UBOOTPATH "\0"                                  \
 651         "tftpflash=tftpboot $loadaddr $uboot; "                         \
 652                 "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\
 653                 "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "   \
 654                 "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "\
 655                 "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\
 656                 "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"\
 657         "fdtaddr=780000\0"                                              \
 658         "fdtfile=" CONFIG_FDTFILE "\0"                                  \
 659         "console=ttyS0\0"                                               \
 660         "setbootargs=setenv bootargs "                                  \
 661                 "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
 662         "setipargs=setenv bootargs nfsroot=$serverip:$rootpath "         \
 663                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"\
 664                                                         "$netdev:off " \
 665                 "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
 666
 667 #define CONFIG_NFSBOOTCOMMAND                                           \
 668         "setenv rootdev /dev/nfs;"                                      \
 669         "run setbootargs;"                                              \
 670         "run setipargs;"                                                \
 671         "tftp $loadaddr $bootfile;"                                     \
 672         "tftp $fdtaddr $fdtfile;"                                       \
 673         "bootm $loadaddr - $fdtaddr"
 674
 675 #define CONFIG_RAMBOOTCOMMAND                                           \
 676         "setenv rootdev /dev/ram;"                                      \
 677         "run setbootargs;"                                              \
 678         "tftp $ramdiskaddr $ramdiskfile;"                               \
 679         "tftp $loadaddr $bootfile;"                                     \
 680         "tftp $fdtaddr $fdtfile;"                                       \
 681         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 682
 683 #undef MK_STR
 684 #undef XMK_STR
 685
 686 #endif  /* __CONFIG_H */