include/configs/T104xRDB.h

   1 /*
   2 + * Copyright 2014 Freescale Semiconductor, Inc.
   3 + *
   4 + * SPDX-License-Identifier:     GPL-2.0+
   5 + */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * T104x RDB board configuration file
  12  */
  13 #define CONFIG_T104xRDB
  14 #define CONFIG_PHYS_64BIT
  15 #define CONFIG_SYS_GENERIC_BOARD
  16 #define CONFIG_DISPLAY_BOARDINFO
  17
  18 #define CONFIG_E500                     /* BOOKE e500 family */
  19 #include <asm/config_mpc85xx.h>
  20
  21 #ifdef CONFIG_RAMBOOT_PBL
  22 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  23 #ifdef CONFIG_T1040RDB
  24 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg
  25 #endif
  26 #ifdef CONFIG_T1042RDB_PI
  27 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg
  28 #endif
  29 #ifdef CONFIG_T1042RDB
  30 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg
  31 #endif
  32
  33 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  34 #define CONFIG_SPL_ENV_SUPPORT
  35 #define CONFIG_SPL_SERIAL_SUPPORT
  36 #define CONFIG_SPL_FLUSH_IMAGE
  37 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  38 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  39 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  40 #define CONFIG_SPL_I2C_SUPPORT
  41 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
  42 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  43 #define CONFIG_SYS_TEXT_BASE            0x30001000
  44 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  45 #define CONFIG_SPL_PAD_TO               0x40000
  46 #define CONFIG_SPL_MAX_SIZE             0x28000
  47 #ifdef CONFIG_SPL_BUILD
  48 #define CONFIG_SPL_SKIP_RELOCATE
  49 #define CONFIG_SPL_COMMON_INIT_DDR
  50 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  51 #define CONFIG_SYS_NO_FLASH
  52 #endif
  53 #define RESET_VECTOR_OFFSET             0x27FFC
  54 #define BOOT_PAGE_OFFSET                0x27000
  55
  56 #ifdef CONFIG_NAND
  57 #define CONFIG_SPL_NAND_SUPPORT
  58 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  59 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  60 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  61 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  62 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  63 #define CONFIG_SPL_NAND_BOOT
  64 #endif
  65
  66 #ifdef CONFIG_SPIFLASH
  67 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  68 #define CONFIG_SPL_SPI_SUPPORT
  69 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  70 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  71 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  72 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  73 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  74 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  75 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  76 #ifndef CONFIG_SPL_BUILD
  77 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  78 #endif
  79 #define CONFIG_SPL_SPI_BOOT
  80 #endif
  81
  82 #ifdef CONFIG_SDCARD
  83 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  84 #define CONFIG_SPL_MMC_SUPPORT
  85 #define CONFIG_SPL_MMC_MINIMAL
  86 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  87 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  88 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  89 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  90 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  91 #ifndef CONFIG_SPL_BUILD
  92 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  93 #endif
  94 #define CONFIG_SPL_MMC_BOOT
  95 #endif
  96
  97 #endif
  98
  99 /* High Level Configuration Options */
 100 #define CONFIG_BOOKE
 101 #define CONFIG_E500MC                   /* BOOKE e500mc family */
 102 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 103 #define CONFIG_MP                       /* support multiple processors */
 104
 105 /* support deep sleep */
 106 #define CONFIG_DEEP_SLEEP
 107 #if defined(CONFIG_DEEP_SLEEP)
 108 #define CONFIG_BOARD_EARLY_INIT_F
 109 #define CONFIG_SILENT_CONSOLE
 110 #endif
 111
 112 #ifndef CONFIG_SYS_TEXT_BASE
 113 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 114 #endif
 115
 116 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 117 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 118 #endif
 119
 120 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 121 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
 122 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 123 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
 124 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 125 #define CONFIG_PCI_INDIRECT_BRIDGE
 126 #define CONFIG_PCIE1                    /* PCIE controler 1 */
 127 #define CONFIG_PCIE2                    /* PCIE controler 2 */
 128 #define CONFIG_PCIE3                    /* PCIE controler 3 */
 129 #define CONFIG_PCIE4                    /* PCIE controler 4 */
 130
 131 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 132 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 133
 134 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 135
 136 #define CONFIG_ENV_OVERWRITE
 137
 138 #ifndef CONFIG_SYS_NO_FLASH
 139 #define CONFIG_FLASH_CFI_DRIVER
 140 #define CONFIG_SYS_FLASH_CFI
 141 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 142 #endif
 143
 144 #if defined(CONFIG_SPIFLASH)
 145 #define CONFIG_SYS_EXTRA_ENV_RELOC
 146 #define CONFIG_ENV_IS_IN_SPI_FLASH
 147 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 148 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 149 #define CONFIG_ENV_SECT_SIZE            0x10000
 150 #elif defined(CONFIG_SDCARD)
 151 #define CONFIG_SYS_EXTRA_ENV_RELOC
 152 #define CONFIG_ENV_IS_IN_MMC
 153 #define CONFIG_SYS_MMC_ENV_DEV          0
 154 #define CONFIG_ENV_SIZE                 0x2000
 155 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 156 #elif defined(CONFIG_NAND)
 157 #define CONFIG_SYS_EXTRA_ENV_RELOC
 158 #define CONFIG_ENV_IS_IN_NAND
 159 #define CONFIG_ENV_SIZE                 0x2000
 160 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 161 #else
 162 #define CONFIG_ENV_IS_IN_FLASH
 163 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 164 #define CONFIG_ENV_SIZE         0x2000
 165 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 166 #endif
 167
 168 #define CONFIG_SYS_CLK_FREQ     100000000
 169 #define CONFIG_DDR_CLK_FREQ     66666666
 170
 171 /*
 172  * These can be toggled for performance analysis, otherwise use default.
 173  */
 174 #define CONFIG_SYS_CACHE_STASHING
 175 #define CONFIG_BACKSIDE_L2_CACHE
 176 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 177 #define CONFIG_BTB                      /* toggle branch predition */
 178 #define CONFIG_DDR_ECC
 179 #ifdef CONFIG_DDR_ECC
 180 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 181 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 182 #endif
 183
 184 #define CONFIG_ENABLE_36BIT_PHYS
 185
 186 #define CONFIG_ADDR_MAP
 187 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 188
 189 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 190 #define CONFIG_SYS_MEMTEST_END          0x00400000
 191 #define CONFIG_SYS_ALT_MEMTEST
 192 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 193
 194 /*
 195  *  Config the L3 Cache as L3 SRAM
 196  */
 197 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 198 #define CONFIG_SYS_L3_SIZE              256 << 10
 199 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 200 #ifdef CONFIG_RAMBOOT_PBL
 201 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 202 #endif
 203 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 204 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 205 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 206 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 207
 208 #define CONFIG_SYS_DCSRBAR              0xf0000000
 209 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 210
 211 /*
 212  * DDR Setup
 213  */
 214 #define CONFIG_VERY_BIG_RAM
 215 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 216 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 217
 218 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 219 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 220 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 221
 222 #define CONFIG_DDR_SPD
 223 #define CONFIG_SYS_FSL_DDR3
 224
 225 #define CONFIG_SYS_SPD_BUS_NUM  0
 226 #define SPD_EEPROM_ADDRESS      0x51
 227
 228 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 229
 230 /*
 231  * IFC Definitions
 232  */
 233 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 234 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 235
 236 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 237 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 238                                 CSPR_PORT_SIZE_16 | \
 239                                 CSPR_MSEL_NOR | \
 240                                 CSPR_V)
 241 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 242
 243 /*
 244  * TDM Definition
 245  */
 246 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 247
 248 /* NOR Flash Timing Params */
 249 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 250 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 251                                 FTIM0_NOR_TEADC(0x5) | \
 252                                 FTIM0_NOR_TEAHC(0x5))
 253 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 254                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 255                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 256 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 257                                 FTIM2_NOR_TCH(0x4) | \
 258                                 FTIM2_NOR_TWPH(0x0E) | \
 259                                 FTIM2_NOR_TWP(0x1c))
 260 #define CONFIG_SYS_NOR_FTIM3    0x0
 261
 262 #define CONFIG_SYS_FLASH_QUIET_TEST
 263 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 264
 265 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 266 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 267 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 268 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 269
 270 #define CONFIG_SYS_FLASH_EMPTY_INFO
 271 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 272
 273 /* CPLD on IFC */
 274 #define CPLD_LBMAP_MASK                 0x3F
 275 #define CPLD_BANK_SEL_MASK              0x07
 276 #define CPLD_BANK_OVERRIDE              0x40
 277 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 278 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 279 #define CPLD_LBMAP_RESET                0xFF
 280 #define CPLD_LBMAP_SHIFT                0x03
 281 #ifdef CONFIG_T1042RDB_PI
 282 #define CPLD_DIU_SEL_DFP                0x80
 283 #endif
 284
 285 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 286 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 287 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 288 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 289                                 | CSPR_PORT_SIZE_8 \
 290                                 | CSPR_MSEL_GPCM \
 291                                 | CSPR_V)
 292 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 293 #define CONFIG_SYS_CSOR2        0x0
 294 /* CPLD Timing parameters for IFC CS2 */
 295 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 296                                         FTIM0_GPCM_TEADC(0x0e) | \
 297                                         FTIM0_GPCM_TEAHC(0x0e))
 298 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 299                                         FTIM1_GPCM_TRAD(0x1f))
 300 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 301                                         FTIM2_GPCM_TCH(0x8) | \
 302                                         FTIM2_GPCM_TWP(0x1f))
 303 #define CONFIG_SYS_CS2_FTIM3            0x0
 304
 305 /* NAND Flash on IFC */
 306 #define CONFIG_NAND_FSL_IFC
 307 #define CONFIG_SYS_NAND_BASE            0xff800000
 308 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 309
 310 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 311 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 312                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 313                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 314                                 | CSPR_V)
 315 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 316
 317 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 318                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 319                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 320                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 321                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 322                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 323                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 324
 325 #define CONFIG_SYS_NAND_ONFI_DETECTION
 326
 327 /* ONFI NAND Flash mode0 Timing Params */
 328 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 329                                         FTIM0_NAND_TWP(0x18)   | \
 330                                         FTIM0_NAND_TWCHT(0x07) | \
 331                                         FTIM0_NAND_TWH(0x0a))
 332 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 333                                         FTIM1_NAND_TWBE(0x39)  | \
 334                                         FTIM1_NAND_TRR(0x0e)   | \
 335                                         FTIM1_NAND_TRP(0x18))
 336 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 337                                         FTIM2_NAND_TREH(0x0a) | \
 338                                         FTIM2_NAND_TWHRE(0x1e))
 339 #define CONFIG_SYS_NAND_FTIM3           0x0
 340
 341 #define CONFIG_SYS_NAND_DDR_LAW         11
 342 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 343 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 344 #define CONFIG_CMD_NAND
 345
 346 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 347
 348 #if defined(CONFIG_NAND)
 349 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 350 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 351 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 352 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 353 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 354 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 355 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 356 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 357 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 358 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 359 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 360 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 361 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 362 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 363 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 364 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 365 #else
 366 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 367 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 368 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 369 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 370 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 371 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 372 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 373 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 374 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 375 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 376 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 377 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 378 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 379 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 380 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 381 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 382 #endif
 383
 384 #ifdef CONFIG_SPL_BUILD
 385 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 386 #else
 387 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 388 #endif
 389
 390 #if defined(CONFIG_RAMBOOT_PBL)
 391 #define CONFIG_SYS_RAMBOOT
 392 #endif
 393
 394 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 395 #if defined(CONFIG_NAND)
 396 #define CONFIG_A008044_WORKAROUND
 397 #endif
 398 #endif
 399
 400 #define CONFIG_BOARD_EARLY_INIT_R
 401 #define CONFIG_MISC_INIT_R
 402
 403 #define CONFIG_HWCONFIG
 404
 405 /* define to use L1 as initial stack */
 406 #define CONFIG_L1_INIT_RAM
 407 #define CONFIG_SYS_INIT_RAM_LOCK
 408 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 409 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 410 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe0ec000
 411 /* The assembler doesn't like typecast */
 412 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 413         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 414           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 415 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 416
 417 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 418                                         GENERATED_GBL_DATA_SIZE)
 419 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 420
 421 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 422 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 423
 424 /* Serial Port - controlled on board with jumper J8
 425  * open - index 2
 426  * shorted - index 1
 427  */
 428 #define CONFIG_CONS_INDEX       1
 429 #define CONFIG_SYS_NS16550
 430 #define CONFIG_SYS_NS16550_SERIAL
 431 #define CONFIG_SYS_NS16550_REG_SIZE     1
 432 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 433
 434 #define CONFIG_SYS_BAUDRATE_TABLE       \
 435         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 436
 437 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 438 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 439 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 440 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 441 #define CONFIG_SERIAL_MULTI             /* Enable both serial ports */
 442 #ifndef CONFIG_SPL_BUILD
 443 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 444 #endif
 445
 446 /* Use the HUSH parser */
 447 #define CONFIG_SYS_HUSH_PARSER
 448 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 449
 450 #ifdef CONFIG_T1042RDB_PI
 451 /* Video */
 452 #define CONFIG_FSL_DIU_FB
 453
 454 #ifdef CONFIG_FSL_DIU_FB
 455 #define CONFIG_FSL_DIU_CH7301
 456 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 457 #define CONFIG_VIDEO
 458 #define CONFIG_CMD_BMP
 459 #define CONFIG_CFB_CONSOLE
 460 #define CONFIG_CFB_CONSOLE_ANSI
 461 #define CONFIG_VIDEO_SW_CURSOR
 462 #define CONFIG_VGA_AS_SINGLE_DEVICE
 463 #define CONFIG_VIDEO_LOGO
 464 #define CONFIG_VIDEO_BMP_LOGO
 465 #endif
 466 #endif
 467
 468 /* pass open firmware flat tree */
 469 #define CONFIG_OF_LIBFDT
 470 #define CONFIG_OF_BOARD_SETUP
 471 #define CONFIG_OF_STDOUT_VIA_ALIAS
 472
 473 /* new uImage format support */
 474 #define CONFIG_FIT
 475 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 476
 477 /* I2C */
 478 #define CONFIG_SYS_I2C
 479 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 480 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 481 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 482 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 483 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 484 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 485 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 486 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 487 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 488 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 489 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 490 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 491 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 492
 493 /* I2C bus multiplexer */
 494 #define I2C_MUX_PCA_ADDR                0x70
 495 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 496 #define I2C_MUX_CH_DEFAULT      0x8
 497 #endif
 498
 499 #ifdef CONFIG_T1042RDB_PI
 500 /* LDI/DVI Encoder for display */
 501 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 502 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 503
 504 /*
 505  * RTC configuration
 506  */
 507 #define RTC
 508 #define CONFIG_RTC_DS1337               1
 509 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 510
 511 /*DVI encoder*/
 512 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 513 #endif
 514
 515 /*
 516  * eSPI - Enhanced SPI
 517  */
 518 #define CONFIG_FSL_ESPI
 519 #define CONFIG_SPI_FLASH
 520 #define CONFIG_SPI_FLASH_STMICRO
 521 #define CONFIG_SPI_FLASH_BAR
 522 #define CONFIG_CMD_SF
 523 #define CONFIG_SF_DEFAULT_SPEED         10000000
 524 #define CONFIG_SF_DEFAULT_MODE          0
 525 #define CONFIG_ENV_SPI_BUS              0
 526 #define CONFIG_ENV_SPI_CS               0
 527 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 528 #define CONFIG_ENV_SPI_MODE             0
 529
 530 /*
 531  * General PCI
 532  * Memory space is mapped 1-1, but I/O space must start from 0.
 533  */
 534
 535 #ifdef CONFIG_PCI
 536 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 537 #ifdef CONFIG_PCIE1
 538 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 539 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 540 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 541 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 542 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 543 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 544 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 545 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 546 #endif
 547
 548 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 549 #ifdef CONFIG_PCIE2
 550 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 551 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 552 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 553 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 554 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 555 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 556 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 557 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 558 #endif
 559
 560 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 561 #ifdef CONFIG_PCIE3
 562 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 563 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 564 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 565 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 566 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 567 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 568 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 569 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 570 #endif
 571
 572 /* controller 4, Base address 203000 */
 573 #ifdef CONFIG_PCIE4
 574 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 575 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 576 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 577 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 578 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 579 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 580 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 581 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 582 #endif
 583
 584 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 585 #define CONFIG_E1000
 586
 587 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 588 #define CONFIG_DOS_PARTITION
 589 #endif  /* CONFIG_PCI */
 590
 591 /* SATA */
 592 #define CONFIG_FSL_SATA_V2
 593 #ifdef CONFIG_FSL_SATA_V2
 594 #define CONFIG_LIBATA
 595 #define CONFIG_FSL_SATA
 596
 597 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 598 #define CONFIG_SATA1
 599 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 600 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 601
 602 #define CONFIG_LBA48
 603 #define CONFIG_CMD_SATA
 604 #define CONFIG_DOS_PARTITION
 605 #define CONFIG_CMD_EXT2
 606 #endif
 607
 608 /*
 609 * USB
 610 */
 611 #define CONFIG_HAS_FSL_DR_USB
 612
 613 #ifdef CONFIG_HAS_FSL_DR_USB
 614 #define CONFIG_USB_EHCI
 615
 616 #ifdef CONFIG_USB_EHCI
 617 #define CONFIG_CMD_USB
 618 #define CONFIG_USB_STORAGE
 619 #define CONFIG_USB_EHCI_FSL
 620 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 621 #define CONFIG_CMD_EXT2
 622 #endif
 623 #endif
 624
 625 #define CONFIG_MMC
 626
 627 #ifdef CONFIG_MMC
 628 #define CONFIG_FSL_ESDHC
 629 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 630 #define CONFIG_CMD_MMC
 631 #define CONFIG_GENERIC_MMC
 632 #define CONFIG_CMD_EXT2
 633 #define CONFIG_CMD_FAT
 634 #define CONFIG_DOS_PARTITION
 635 #endif
 636
 637 /* Qman/Bman */
 638 #ifndef CONFIG_NOBQFMAN
 639 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 640 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 641 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 642 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 643 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 644 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 645 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 646 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 647 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 648 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 649                                         CONFIG_SYS_BMAN_CENA_SIZE)
 650 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 651 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 652 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 653 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 654 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 655 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 656 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 657 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 658 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 659 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 660 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 661                                         CONFIG_SYS_QMAN_CENA_SIZE)
 662 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 663 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 664
 665 #define CONFIG_SYS_DPAA_FMAN
 666 #define CONFIG_SYS_DPAA_PME
 667
 668 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 669 #define CONFIG_QE
 670 #define CONFIG_U_QE
 671 #endif
 672
 673 /* Default address of microcode for the Linux Fman driver */
 674 #if defined(CONFIG_SPIFLASH)
 675 /*
 676  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 677  * env, so we got 0x110000.
 678  */
 679 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 680 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 681 #elif defined(CONFIG_SDCARD)
 682 /*
 683  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 684  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 685  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 686  */
 687 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 688 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 689 #elif defined(CONFIG_NAND)
 690 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 691 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 692 #else
 693 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 694 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 695 #endif
 696
 697 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 698 #if defined(CONFIG_SPIFLASH)
 699 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 700 #elif defined(CONFIG_SDCARD)
 701 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 702 #elif defined(CONFIG_NAND)
 703 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 704 #else
 705 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 706 #endif
 707 #endif
 708
 709
 710 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 711 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 712 #endif /* CONFIG_NOBQFMAN */
 713
 714 #ifdef CONFIG_SYS_DPAA_FMAN
 715 #define CONFIG_FMAN_ENET
 716 #define CONFIG_PHY_VITESSE
 717 #define CONFIG_PHY_REALTEK
 718 #endif
 719
 720 #ifdef CONFIG_FMAN_ENET
 721 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 722 #define CONFIG_SYS_SGMII1_PHY_ADDR              0x03
 723 #endif
 724 #define CONFIG_SYS_RGMII1_PHY_ADDR              0x01
 725 #define CONFIG_SYS_RGMII2_PHY_ADDR              0x02
 726
 727 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 728 #ifdef CONFIG_T1040RDB
 729 #define CONFIG_VSC9953
 730 #define CONFIG_VSC9953_CMD
 731 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 732 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 733 #endif
 734
 735 #define CONFIG_MII              /* MII PHY management */
 736 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 737 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 738 #endif
 739
 740 /*
 741  * Environment
 742  */
 743 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 744 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 745
 746 /*
 747  * Command line configuration.
 748  */
 749 #include <config_cmd_default.h>
 750
 751 #ifdef CONFIG_T1042RDB_PI
 752 #define CONFIG_CMD_DATE
 753 #endif
 754 #define CONFIG_CMD_DHCP
 755 #define CONFIG_CMD_ELF
 756 #define CONFIG_CMD_ERRATA
 757 #define CONFIG_CMD_GREPENV
 758 #define CONFIG_CMD_IRQ
 759 #define CONFIG_CMD_I2C
 760 #define CONFIG_CMD_MII
 761 #define CONFIG_CMD_PING
 762 #define CONFIG_CMD_REGINFO
 763
 764 #ifdef CONFIG_PCI
 765 #define CONFIG_CMD_PCI
 766 #endif
 767
 768 /* Hash command with SHA acceleration supported in hardware */
 769 #ifdef CONFIG_FSL_CAAM
 770 #define CONFIG_CMD_HASH
 771 #define CONFIG_SHA_HW_ACCEL
 772 #endif
 773
 774 /*
 775  * Miscellaneous configurable options
 776  */
 777 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 778 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 779 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 780 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 781 #ifdef CONFIG_CMD_KGDB
 782 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 783 #else
 784 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 785 #endif
 786 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 787 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 788 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 789
 790 /*
 791  * For booting Linux, the board info and command line data
 792  * have to be in the first 64 MB of memory, since this is
 793  * the maximum mapped by the Linux kernel during initialization.
 794  */
 795 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 796 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 797
 798 #ifdef CONFIG_CMD_KGDB
 799 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 800 #endif
 801
 802 /*
 803  * Dynamic MTD Partition support with mtdparts
 804  */
 805 #ifndef CONFIG_SYS_NO_FLASH
 806 #define CONFIG_MTD_DEVICE
 807 #define CONFIG_MTD_PARTITIONS
 808 #define CONFIG_CMD_MTDPARTS
 809 #define CONFIG_FLASH_CFI_MTD
 810 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 811                         "spi0=spife110000.0"
 812 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 813                                 "128k(dtb),96m(fs),-(user);"\
 814                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 815                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 816                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 817 #endif
 818
 819 /*
 820  * Environment Configuration
 821  */
 822 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 823 #define CONFIG_BOOTFILE         "uImage"
 824 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 825
 826 /* default location for tftp and bootm */
 827 #define CONFIG_LOADADDR         1000000
 828
 829 #define CONFIG_BOOTDELAY        10      /*-1 disables auto-boot*/
 830
 831 #define CONFIG_BAUDRATE 115200
 832
 833 #define __USB_PHY_TYPE  utmi
 834 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 835
 836 #ifdef CONFIG_T1040RDB
 837 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 838 #elif defined(CONFIG_T1042RDB_PI)
 839 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 840 #elif defined(CONFIG_T1042RDB)
 841 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 842 #endif
 843
 844 #ifdef CONFIG_FSL_DIU_FB
 845 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 846 #else
 847 #define DIU_ENVIRONMENT
 848 #endif
 849
 850 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 851         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 852         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 853         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 854         "netdev=eth0\0"                                         \
 855         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 856         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 857         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 858         "tftpflash=tftpboot $loadaddr $uboot && "               \
 859         "protect off $ubootaddr +$filesize && "                 \
 860         "erase $ubootaddr +$filesize && "                       \
 861         "cp.b $loadaddr $ubootaddr $filesize && "               \
 862         "protect on $ubootaddr +$filesize && "                  \
 863         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 864         "consoledev=ttyS0\0"                                    \
 865         "ramdiskaddr=2000000\0"                                 \
 866         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 867         "fdtaddr=c00000\0"                                      \
 868         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 869         "bdev=sda3\0"
 870
 871 #define CONFIG_LINUX                       \
 872         "setenv bootargs root=/dev/ram rw "            \
 873         "console=$consoledev,$baudrate $othbootargs;"  \
 874         "setenv ramdiskaddr 0x02000000;"               \
 875         "setenv fdtaddr 0x00c00000;"                   \
 876         "setenv loadaddr 0x1000000;"                   \
 877         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 878
 879 #define CONFIG_HDBOOT                                   \
 880         "setenv bootargs root=/dev/$bdev rw "           \
 881         "console=$consoledev,$baudrate $othbootargs;"   \
 882         "tftp $loadaddr $bootfile;"                     \
 883         "tftp $fdtaddr $fdtfile;"                       \
 884         "bootm $loadaddr - $fdtaddr"
 885
 886 #define CONFIG_NFSBOOTCOMMAND                   \
 887         "setenv bootargs root=/dev/nfs rw "     \
 888         "nfsroot=$serverip:$rootpath "          \
 889         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 890         "console=$consoledev,$baudrate $othbootargs;"   \
 891         "tftp $loadaddr $bootfile;"             \
 892         "tftp $fdtaddr $fdtfile;"               \
 893         "bootm $loadaddr - $fdtaddr"
 894
 895 #define CONFIG_RAMBOOTCOMMAND                           \
 896         "setenv bootargs root=/dev/ram rw "             \
 897         "console=$consoledev,$baudrate $othbootargs;"   \
 898         "tftp $ramdiskaddr $ramdiskfile;"               \
 899         "tftp $loadaddr $bootfile;"                     \
 900         "tftp $fdtaddr $fdtfile;"                       \
 901         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 902
 903 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 904
 905 #ifdef CONFIG_SECURE_BOOT
 906 #include <asm/fsl_secure_boot.h>
 907 #define CONFIG_CMD_BLOB
 908 #endif
 909
 910 #endif  /* __CONFIG_H */