include/configs/actux4.h

   1 /*
   2  * (C) Copyright 2007
   3  * Michael Schwingen, michael@schwingen.org
   4  *
   5  * Configuration settings for the AcTux-4 board.
   6  *
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 #define CONFIG_IXP425                   1
  30 #define CONFIG_ACTUX4                   1
  31
  32 #define CONFIG_DISPLAY_CPUINFO          1
  33 #define CONFIG_DISPLAY_BOARDINFO        1
  34
  35 #define CONFIG_IXP_SERIAL
  36 #define CONFIG_SYS_IXP425_CONSOLE               IXP425_UART1
  37 #define CONFIG_BAUDRATE                 115200
  38 #define CONFIG_BOOTDELAY                3
  39 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
  40
  41 /***************************************************************
  42  * U-boot generic defines start here.
  43  ***************************************************************/
  44 #undef CONFIG_USE_IRQ
  45
  46 /* Size of malloc() pool */
  47 #define CONFIG_SYS_MALLOC_LEN                   (CONFIG_ENV_SIZE + 128*1024)
  48 /* size in bytes reserved for initial data */
  49 #define CONFIG_SYS_GBL_DATA_SIZE                128
  50
  51 /* allow to overwrite serial and ethaddr */
  52 #define CONFIG_ENV_OVERWRITE
  53
  54 /* Command line configuration */
  55 #include <config_cmd_default.h>
  56
  57 #define CONFIG_CMD_ELF
  58
  59 #define CONFIG_BOOTCOMMAND              "run boot_flash"
  60 /* enable passing of ATAGs */
  61 #define CONFIG_CMDLINE_TAG              1
  62 #define CONFIG_SETUP_MEMORY_TAGS        1
  63 #define CONFIG_INITRD_TAG               1
  64
  65 #if defined(CONFIG_CMD_KGDB)
  66 # define CONFIG_KGDB_BAUDRATE           230400
  67 /* which serial port to use */
  68 # define CONFIG_KGDB_SER_INDEX          1
  69 #endif
  70
  71 /* Miscellaneous configurable options */
  72 #define CONFIG_SYS_LONGHELP
  73 #define CONFIG_SYS_PROMPT                       "=> "
  74 /* Console I/O Buffer Size */
  75 #define CONFIG_SYS_CBSIZE                       256
  76 /* Print Buffer Size */
  77 #define CONFIG_SYS_PBSIZE                       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
  78 /* max number of command args */
  79 #define CONFIG_SYS_MAXARGS                      16
  80 /* Boot Argument Buffer Size */
  81 #define CONFIG_SYS_BARGSIZE                     CONFIG_SYS_CBSIZE
  82
  83 #define CONFIG_SYS_MEMTEST_START                0x00400000
  84 #define CONFIG_SYS_MEMTEST_END                  0x00800000
  85
  86 /* everything, incl board info, in Hz */
  87 #undef  CONFIG_SYS_CLKS_IN_HZ
  88 /* spec says 66.666 MHz, but it appears to be 33 */
  89 #define CONFIG_SYS_HZ                           3333333
  90
  91 /* default load address */
  92 #define CONFIG_SYS_LOAD_ADDR                    0x00010000
  93
  94 /* valid baudrates */
  95 #define CONFIG_SYS_BAUDRATE_TABLE               { 9600, 19200, 38400, 57600, \
  96                                           115200, 230400 }
  97 #define CONFIG_SERIAL_RTS_ACTIVE        1
  98
  99 /*
 100  * Stack sizes
 101  * The stack sizes are set up in start.S using the settings below
 102  */
 103 #define CONFIG_STACKSIZE                (128*1024)      /* regular stack */
 104 #ifdef CONFIG_USE_IRQ
 105 # define CONFIG_STACKSIZE_IRQ           (4*1024)        /* IRQ stack */
 106 # define CONFIG_STACKSIZE_FIQ           (4*1024)        /* FIQ stack */
 107 #endif
 108
 109 /* Expansion bus settings */
 110 #define CONFIG_SYS_EXP_CS0                      0xbd113003
 111
 112 /* SDRAM settings */
 113 #define CONFIG_NR_DRAM_BANKS            1
 114 #define PHYS_SDRAM_1                    0x00000000
 115 #define CONFIG_SYS_DRAM_BASE                    0x00000000
 116
 117 /* 32MB SDRAM */
 118 #define CONFIG_SYS_SDR_CONFIG                   0x18
 119 #define PHYS_SDRAM_1_SIZE               0x02000000
 120 #define CONFIG_SYS_SDRAM_REFRESH_CNT            0x81a
 121 #define CONFIG_SYS_SDR_MODE_CONFIG              0x1
 122 #define CONFIG_SYS_DRAM_SIZE                    0x02000000
 123
 124 /* FLASH organization */
 125 #define CONFIG_SYS_MAX_FLASH_BANKS              2
 126 /* max # of sectors per chip */
 127 #define CONFIG_SYS_MAX_FLASH_SECT               70
 128 #define PHYS_FLASH_1                    0x50000000
 129 #define PHYS_FLASH_2                    0x51000000
 130 #define CONFIG_SYS_FLASH_BANKS_LIST             { PHYS_FLASH_1, PHYS_FLASH_2 }
 131
 132 #define CONFIG_SYS_FLASH_BASE                   PHYS_FLASH_1
 133 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 134 #define CONFIG_SYS_MONITOR_LEN                  (252 << 10)
 135
 136 /* Use common CFI driver */
 137 #define CONFIG_SYS_FLASH_CFI
 138 #define CONFIG_FLASH_CFI_DRIVER
 139 /* board provides its own flash_init code */
 140 #define CONFIG_FLASH_CFI_LEGACY         1
 141 /* no byte writes on IXP4xx */
 142 #define CONFIG_SYS_FLASH_CFI_WIDTH              FLASH_CFI_16BIT
 143 /* SST 39VF020 etc. support */
 144 #define CONFIG_SYS_FLASH_LEGACY_256Kx8  1
 145
 146 /* print 'E' for empty sector on flinfo */
 147 #define CONFIG_SYS_FLASH_EMPTY_INFO
 148
 149 /* Ethernet */
 150
 151 /* include IXP4xx NPE support */
 152 #define CONFIG_IXP4XX_NPE               1
 153
 154 #define CONFIG_NET_MULTI                1
 155 /* NPE0 PHY address */
 156 #define CONFIG_PHY_ADDR                 0x1C
 157 /* MII PHY management */
 158 #define CONFIG_MII                      1
 159 /* Number of ethernet rx buffers & descriptors */
 160 #define CONFIG_SYS_RX_ETH_BUFFER                16
 161
 162 #define CONFIG_CMD_DHCP
 163 #define CONFIG_CMD_NET
 164 #define CONFIG_CMD_MII
 165 #define CONFIG_CMD_PING
 166 #undef  CONFIG_CMD_NFS
 167
 168 /* BOOTP options */
 169 #define CONFIG_BOOTP_BOOTFILESIZE
 170 #define CONFIG_BOOTP_BOOTPATH
 171 #define CONFIG_BOOTP_GATEWAY
 172 #define CONFIG_BOOTP_HOSTNAME
 173
 174 /* Cache Configuration */
 175 #define CONFIG_SYS_CACHELINE_SIZE               32
 176
 177 /* environment organization: one complete 4k flash sector */
 178 #define CONFIG_ENV_IS_IN_FLASH          1
 179 #define CONFIG_ENV_SIZE                 0x1000
 180 #define CONFIG_ENV_ADDR                 (PHYS_FLASH_1 + 0x3f000)
 181
 182 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 183         "npe_ucode=51000000\0"                                          \
 184         "mtd=IXP4XX-Flash.0:252k(uboot),4k(uboot_env);"                 \
 185         "IXP4XX-Flash.1:128k(ucode),1280k(linux),-(root)\0"             \
 186         "kerneladdr=51020000\0"                                         \
 187         "rootaddr=51160000\0"                                           \
 188         "loadaddr=10000\0"                                              \
 189         "updateboot_ser=mw.b 10000 ff 40000;"                           \
 190         " loady ${loadaddr};"                                           \
 191         " run eraseboot writeboot\0"                                    \
 192         "updateboot_net=mw.b 10000 ff 40000;"                           \
 193         " tftp ${loadaddr} u-boot.bin;"                                 \
 194         " run eraseboot writeboot\0"                                    \
 195         "eraseboot=protect off 50000000 5003efff;"                      \
 196         " erase 50000000 +${filesize}\0"                                \
 197         "writeboot=cp.b 10000 50000000 ${filesize}\0"                   \
 198         "eraseenv=protect off 5003f000 5003ffff;"                       \
 199         " erase 5003f000 5003ffff\0"                                    \
 200         "updateroot=tftp ${loadaddr} ${rootfile};"                      \
 201         " era ${rootaddr} +${filesize};"                                \
 202         " cp.b ${loadaddr} ${rootaddr} ${filesize}\0"                   \
 203         "updatekern=tftp ${loadaddr} ${kernelfile};"                    \
 204         " era ${kerneladdr} +${filesize};"                              \
 205         " cp.b ${loadaddr} ${kerneladdr} ${filesize}\0"                 \
 206         "flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4" \
 207         " rootfstype=squashfs,jffs2 init=/etc/preinit\0"                \
 208         "netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4"   \
 209         " rootfstype=squashfs,jffs2 init=/etc/preinit\0"                \
 210         "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
 211         "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0"       \
 212         "boot_flash=run flashargs addtty addeth;"                       \
 213         " bootm ${kerneladdr}\0"                                        \
 214         "boot_net=run netargs addtty addeth;"                           \
 215         " tftpboot ${loadaddr} ${kernelfile};"                          \
 216         " bootm\0"
 217
 218 #endif /* __CONFIG_H */