include/configs/adp-ag101p.h

   1 /*
   2  * Copyright (C) 2011 Andes Technology Corporation
   3  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
   4  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22  */
  23
  24 #ifndef __CONFIG_H
  25 #define __CONFIG_H
  26
  27 #include <asm/arch/ag101.h>
  28
  29 /*
  30  * CPU and Board Configuration Options
  31  */
  32 #define CONFIG_ADP_AG101P
  33
  34 #define CONFIG_USE_INTERRUPT
  35
  36 #define CONFIG_SKIP_LOWLEVEL_INIT
  37
  38 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
  39 #define CONFIG_MEM_REMAP
  40 #endif
  41
  42 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
  43 #define CONFIG_SYS_TEXT_BASE    0x03200000
  44 #else
  45 #define CONFIG_SYS_TEXT_BASE    0x00000000
  46 #endif
  47
  48 /*
  49  * Timer
  50  */
  51
  52 /*
  53  * According to the discussion in u-boot mailing list before,
  54  * CONFIG_SYS_HZ at 1000 is mandatory.
  55  */
  56 #define CONFIG_SYS_HZ           1000
  57 #define CONFIG_SYS_CLK_FREQ     39062500
  58 #define VERSION_CLOCK           CONFIG_SYS_CLK_FREQ
  59
  60 /*
  61  * Use Externel CLOCK or PCLK
  62  */
  63 #undef CONFIG_FTRTC010_EXTCLK
  64
  65 #ifndef CONFIG_FTRTC010_EXTCLK
  66 #define CONFIG_FTRTC010_PCLK
  67 #endif
  68
  69 #ifdef CONFIG_FTRTC010_EXTCLK
  70 #define TIMER_CLOCK     32768                   /* CONFIG_FTRTC010_EXTCLK */
  71 #else
  72 #define TIMER_CLOCK     CONFIG_SYS_HZ           /* CONFIG_FTRTC010_PCLK */
  73 #endif
  74
  75 #define TIMER_LOAD_VAL  0xffffffff
  76
  77 /*
  78  * Real Time Clock
  79  */
  80 #define CONFIG_RTC_FTRTC010
  81
  82 /*
  83  * Real Time Clock Divider
  84  * RTC_DIV_COUNT                        (OSC_CLK/OSC_5MHZ)
  85  */
  86 #define OSC_5MHZ                        (5*1000000)
  87 #define OSC_CLK                         (4*OSC_5MHZ)
  88 #define RTC_DIV_COUNT                   (0.5)   /* Why?? */
  89
  90 /*
  91  * Serial console configuration
  92  */
  93
  94 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
  95 #define CONFIG_BAUDRATE                 38400
  96 #define CONFIG_CONS_INDEX               1
  97 #define CONFIG_SYS_NS16550
  98 #define CONFIG_SYS_NS16550_SERIAL
  99 #define CONFIG_SYS_NS16550_COM1         CONFIG_FTUART010_02_BASE
 100 #define CONFIG_SYS_NS16550_REG_SIZE     -4
 101 #define CONFIG_SYS_NS16550_CLK          ((18432000 * 20) / 25)  /* AG101P */
 102
 103 /*
 104  * Ethernet
 105  */
 106 #define CONFIG_FTMAC100
 107
 108 #define CONFIG_BOOTDELAY        3
 109
 110 /*
 111  * SD (MMC) controller
 112  */
 113 #define CONFIG_MMC
 114 #define CONFIG_CMD_MMC
 115 #define CONFIG_GENERIC_MMC
 116 #define CONFIG_DOS_PARTITION
 117 #define CONFIG_FTSDC010
 118 #define CONFIG_FTSDC010_NUMBER          1
 119 #define CONFIG_CMD_FAT
 120
 121 /*
 122  * Command line configuration.
 123  */
 124 #include <config_cmd_default.h>
 125
 126 #define CONFIG_CMD_CACHE
 127 #define CONFIG_CMD_DATE
 128 #define CONFIG_CMD_PING
 129
 130 /*
 131  * Miscellaneous configurable options
 132  */
 133 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 134 #define CONFIG_SYS_PROMPT       "NDS32 # "      /* Monitor Command Prompt */
 135 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 136
 137 /* Print Buffer Size */
 138 #define CONFIG_SYS_PBSIZE       \
 139         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 140
 141 /* max number of command args */
 142 #define CONFIG_SYS_MAXARGS      16
 143
 144 /* Boot Argument Buffer Size */
 145 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 146
 147 /*
 148  * Stack sizes
 149  *
 150  * The stack sizes are set up in start.S using the settings below
 151  */
 152 #define CONFIG_STACKSIZE        (128 * 1024)    /* regular stack */
 153
 154 /*
 155  * Size of malloc() pool
 156  */
 157 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
 158 #define CONFIG_SYS_MALLOC_LEN           (512 << 10)
 159
 160 /*
 161  * size in bytes reserved for initial data
 162  */
 163 #define CONFIG_SYS_GBL_DATA_SIZE        128
 164
 165 /*
 166  * AHB Controller configuration
 167  */
 168 #define CONFIG_FTAHBC020S
 169
 170 #ifdef CONFIG_FTAHBC020S
 171 #include <faraday/ftahbc020s.h>
 172
 173 /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
 174 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE    0x100
 175
 176 /*
 177  * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
 178  * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
 179  * in C language.
 180  */
 181 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
 182         (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
 183                                         FTAHBC020S_SLAVE_BSR_SIZE(0xb))
 184 #endif
 185
 186 /*
 187  * Watchdog
 188  */
 189 #define CONFIG_FTWDT010_WATCHDOG
 190
 191 /*
 192  * PMU Power controller configuration
 193  */
 194 #define CONFIG_PMU
 195 #define CONFIG_FTPMU010_POWER
 196
 197 #ifdef CONFIG_FTPMU010_POWER
 198 #include <faraday/ftpmu010.h>
 199 #define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS          0x0E
 200 #define CONFIG_SYS_FTPMU010_SDRAMHTC    (FTPMU010_SDRAMHTC_EBICTRL_DCSR  | \
 201                                          FTPMU010_SDRAMHTC_EBIDATA_DCSR  | \
 202                                          FTPMU010_SDRAMHTC_SDRAMCS_DCSR  | \
 203                                          FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \
 204                                          FTPMU010_SDRAMHTC_CKE_DCSR      | \
 205                                          FTPMU010_SDRAMHTC_DQM_DCSR      | \
 206                                          FTPMU010_SDRAMHTC_SDCLK_DCSR)
 207 #endif
 208
 209 /*
 210  * SDRAM controller configuration
 211  */
 212 #define CONFIG_FTSDMC021
 213
 214 #ifdef CONFIG_FTSDMC021
 215 #include <faraday/ftsdmc021.h>
 216
 217 #define CONFIG_SYS_FTSDMC021_TP1        (FTSDMC021_TP1_TRAS(2)  |       \
 218                                          FTSDMC021_TP1_TRP(1)   |       \
 219                                          FTSDMC021_TP1_TRCD(1)  |       \
 220                                          FTSDMC021_TP1_TRF(3)   |       \
 221                                          FTSDMC021_TP1_TWR(1)   |       \
 222                                          FTSDMC021_TP1_TCL(2))
 223
 224 #define CONFIG_SYS_FTSDMC021_TP2        (FTSDMC021_TP2_INI_PREC(4) |    \
 225                                          FTSDMC021_TP2_INI_REFT(8) |    \
 226                                          FTSDMC021_TP2_REF_INTV(0x180))
 227
 228 /*
 229  * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S,
 230  * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in
 231  * C language.
 232  */
 233 #define CONFIG_SYS_FTSDMC021_CR1        (FTSDMC021_CR1_DDW(2)    |      \
 234                                          FTSDMC021_CR1_DSZ(3)    |      \
 235                                          FTSDMC021_CR1_MBW(2)    |      \
 236                                          FTSDMC021_CR1_BNKSIZE(6))
 237
 238 #define CONFIG_SYS_FTSDMC021_CR2        (FTSDMC021_CR2_IPREC     |      \
 239                                          FTSDMC021_CR2_IREF      |      \
 240                                          FTSDMC021_CR2_ISMR)
 241
 242 #define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE
 243 #define CONFIG_SYS_FTSDMC021_BANK0_BSR  (FTSDMC021_BANK_ENABLE   |      \
 244                                          CONFIG_SYS_FTSDMC021_BANK0_BASE)
 245
 246 #endif
 247
 248 /*
 249  * Physical Memory Map
 250  */
 251 #if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT)
 252 #define PHYS_SDRAM_0            0x00000000      /* SDRAM Bank #1 */
 253 #if defined(CONFIG_MEM_REMAP)
 254 #define PHYS_SDRAM_0_AT_INIT    0x10000000      /* SDRAM Bank #1 before remap*/
 255 #endif
 256 #else   /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
 257 #define PHYS_SDRAM_0            0x10000000      /* SDRAM Bank #1 */
 258 #endif
 259
 260 #define CONFIG_NR_DRAM_BANKS    1               /* we have 1 bank of DRAM */
 261 #define PHYS_SDRAM_0_SIZE       0x04000000      /* 64 MB */
 262
 263 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_0
 264
 265 #ifdef CONFIG_MEM_REMAP
 266 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
 267                                         GENERATED_GBL_DATA_SIZE)
 268 #else
 269 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
 270                                         GENERATED_GBL_DATA_SIZE)
 271 #endif /* CONFIG_MEM_REMAP */
 272
 273 /*
 274  * Load address and memory test area should agree with
 275  * arch/nds32/config.mk. Be careful not to overwrite U-boot itself.
 276  */
 277 #define CONFIG_SYS_LOAD_ADDR            0x300000
 278
 279 /* memtest works on 63 MB in DRAM */
 280 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_0
 281 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_0 + 0x03F00000)
 282
 283 /*
 284  * Static memory controller configuration
 285  */
 286 #define CONFIG_FTSMC020
 287
 288 #ifdef CONFIG_FTSMC020
 289 #include <faraday/ftsmc020.h>
 290
 291 #define CONFIG_SYS_FTSMC020_CONFIGS     {                       \
 292         { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },      \
 293         { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },      \
 294 }
 295
 296 #ifndef CONFIG_SKIP_LOWLEVEL_INIT       /* FLASH is on BANK 0 */
 297 #define FTSMC020_BANK0_LOWLV_CONFIG     (FTSMC020_BANK_ENABLE   |       \
 298                                          FTSMC020_BANK_SIZE_32M |       \
 299                                          FTSMC020_BANK_MBW_32)
 300
 301 #define FTSMC020_BANK0_LOWLV_TIMING     (FTSMC020_TPR_RBE       |       \
 302                                          FTSMC020_TPR_AST(1)    |       \
 303                                          FTSMC020_TPR_CTW(1)    |       \
 304                                          FTSMC020_TPR_ATI(1)    |       \
 305                                          FTSMC020_TPR_AT2(1)    |       \
 306                                          FTSMC020_TPR_WTC(1)    |       \
 307                                          FTSMC020_TPR_AHT(1)    |       \
 308                                          FTSMC020_TPR_TRNA(1))
 309 #endif
 310
 311 /*
 312  * FLASH on ADP_AG101P is connected to BANK0
 313  * Just disalbe the other BANK to avoid detection error.
 314  */
 315 #define FTSMC020_BANK0_CONFIG   (FTSMC020_BANK_ENABLE             |     \
 316                                  FTSMC020_BANK_BASE(PHYS_FLASH_1) |     \
 317                                  FTSMC020_BANK_SIZE_32M           |     \
 318                                  FTSMC020_BANK_MBW_32)
 319
 320 #define FTSMC020_BANK0_TIMING   (FTSMC020_TPR_AST(3)   |        \
 321                                  FTSMC020_TPR_CTW(3)   |        \
 322                                  FTSMC020_TPR_ATI(0xf) |        \
 323                                  FTSMC020_TPR_AT2(3)   |        \
 324                                  FTSMC020_TPR_WTC(3)   |        \
 325                                  FTSMC020_TPR_AHT(3)   |        \
 326                                  FTSMC020_TPR_TRNA(0xf))
 327
 328 #define FTSMC020_BANK1_CONFIG   (0x00)
 329 #define FTSMC020_BANK1_TIMING   (0x00)
 330 #endif /* CONFIG_FTSMC020 */
 331
 332 /*
 333  * FLASH and environment organization
 334  */
 335 /* use CFI framework */
 336 #define CONFIG_SYS_FLASH_CFI
 337 #define CONFIG_FLASH_CFI_DRIVER
 338
 339 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 340 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 341
 342 /* support JEDEC */
 343
 344 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
 345 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
 346 #define PHYS_FLASH_1                    0x80400000      /* BANK 1 */
 347 #else   /* !CONFIG_SKIP_LOWLEVEL_INIT */
 348 #ifdef CONFIG_MEM_REMAP
 349 #define PHYS_FLASH_1                    0x80000000      /* BANK 0 */
 350 #else
 351 #define PHYS_FLASH_1                    0x00000000      /* BANK 0 */
 352 #endif  /* CONFIG_MEM_REMAP */
 353 #endif  /* CONFIG_SKIP_LOWLEVEL_INIT */
 354
 355 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 356 #define CONFIG_SYS_FLASH_BANKS_LIST     { PHYS_FLASH_1, }
 357 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 358
 359 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* TO for Flash Erase (ms) */
 360 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* TO for Flash Write (ms) */
 361
 362 /* max number of memory banks */
 363 /*
 364  * There are 4 banks supported for this Controller,
 365  * but we have only 1 bank connected to flash on board
 366  */
 367 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 368
 369 /* max number of sectors on one chip */
 370 #define CONFIG_FLASH_SECTOR_SIZE        (0x10000*2*2)
 371 #define CONFIG_ENV_SECT_SIZE            CONFIG_FLASH_SECTOR_SIZE
 372 #define CONFIG_SYS_MAX_FLASH_SECT       128
 373
 374 /* environments */
 375 #define CONFIG_ENV_IS_IN_FLASH
 376 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE + 0x140000)
 377 #define CONFIG_ENV_SIZE                 8192
 378 #define CONFIG_ENV_OVERWRITE
 379
 380 #endif  /* __CONFIG_H */