include/configs/am335x_evm.h

   1 /*
   2  * am335x_evm.h
   3  *
   4  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation version 2.
   9  *
  10  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
  11  * kind, whether express or implied; without even the implied warranty
  12  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  */
  15
  16 #ifndef __CONFIG_AM335X_EVM_H
  17 #define __CONFIG_AM335X_EVM_H
  18
  19 #include <configs/ti_am335x_common.h>
  20
  21 #ifndef CONFIG_SPL_BUILD
  22 # define CONFIG_FIT
  23 # define CONFIG_TIMESTAMP
  24 # define CONFIG_LZO
  25 # ifdef CONFIG_ENABLE_VBOOT
  26 #  define CONFIG_OF_CONTROL
  27 #  define CONFIG_OF_SEPARATE
  28 #  define CONFIG_DEFAULT_DEVICE_TREE am335x-boneblack
  29 #  define CONFIG_FIT_SIGNATURE
  30 #  define CONFIG_RSA
  31 # endif
  32 #endif
  33
  34 #define CONFIG_SYS_BOOTM_LEN            (16 << 20)
  35
  36 #define MACH_TYPE_TIAM335EVM            3589    /* Until the next sync */
  37 #define CONFIG_MACH_TYPE                MACH_TYPE_TIAM335EVM
  38 #define CONFIG_BOARD_LATE_INIT
  39
  40 /* Clock Defines */
  41 #define V_OSCK                          24000000  /* Clock output from T2 */
  42 #define V_SCLK                          (V_OSCK)
  43
  44 /* Custom script for NOR */
  45 #define CONFIG_SYS_LDSCRIPT             "board/ti/am335x/u-boot.lds"
  46
  47 /* Always 128 KiB env size */
  48 #define CONFIG_ENV_SIZE                 (128 << 10)
  49
  50 /* Enhance our eMMC support / experience. */
  51 #define CONFIG_CMD_GPT
  52 #define CONFIG_EFI_PARTITION
  53 #define CONFIG_PARTITION_UUIDS
  54 #define CONFIG_CMD_PART
  55
  56 #ifdef CONFIG_NAND
  57 #define NANDARGS \
  58         "mtdids=" MTDIDS_DEFAULT "\0" \
  59         "mtdparts=" MTDPARTS_DEFAULT "\0" \
  60         "nandargs=setenv bootargs console=${console} " \
  61                 "${optargs} " \
  62                 "root=${nandroot} " \
  63                 "rootfstype=${nandrootfstype}\0" \
  64         "nandroot=ubi0:rootfs rw ubi.mtd=9,2048\0" \
  65         "nandrootfstype=ubifs rootwait=1\0" \
  66         "nandboot=echo Booting from nand ...; " \
  67                 "run nandargs; " \
  68                 "nand read ${fdtaddr} u-boot-spl-os; " \
  69                 "nand read ${loadaddr} kernel; " \
  70                 "bootz ${loadaddr} - ${fdtaddr}\0"
  71 #else
  72 #define NANDARGS ""
  73 #endif
  74
  75 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  76
  77 #ifndef CONFIG_SPL_BUILD
  78 #define CONFIG_EXTRA_ENV_SETTINGS \
  79         DEFAULT_LINUX_BOOT_ENV \
  80         "boot_fdt=try\0" \
  81         "bootpart=0:2\0" \
  82         "bootdir=/boot\0" \
  83         "bootfile=zImage\0" \
  84         "fdtfile=undefined\0" \
  85         "console=ttyO0,115200n8\0" \
  86         "partitions=" \
  87                 "uuid_disk=${uuid_gpt_disk};" \
  88                 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
  89         "optargs=\0" \
  90         "mmcdev=0\0" \
  91         "mmcroot=/dev/mmcblk0p2 ro\0" \
  92         "mmcrootfstype=ext4 rootwait\0" \
  93         "rootpath=/export/rootfs\0" \
  94         "nfsopts=nolock\0" \
  95         "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
  96                 "::off\0" \
  97         "ramroot=/dev/ram0 rw\0" \
  98         "ramrootfstype=ext2\0" \
  99         "mmcargs=setenv bootargs console=${console} " \
 100                 "${optargs} " \
 101                 "root=${mmcroot} " \
 102                 "rootfstype=${mmcrootfstype}\0" \
 103         "spiroot=/dev/mtdblock4 rw\0" \
 104         "spirootfstype=jffs2\0" \
 105         "spisrcaddr=0xe0000\0" \
 106         "spiimgsize=0x362000\0" \
 107         "spibusno=0\0" \
 108         "spiargs=setenv bootargs console=${console} " \
 109                 "${optargs} " \
 110                 "root=${spiroot} " \
 111                 "rootfstype=${spirootfstype}\0" \
 112         "netargs=setenv bootargs console=${console} " \
 113                 "${optargs} " \
 114                 "root=/dev/nfs " \
 115                 "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
 116                 "ip=dhcp\0" \
 117         "bootenv=uEnv.txt\0" \
 118         "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 119         "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
 120                 "source ${loadaddr}\0" \
 121         "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
 122         "importbootenv=echo Importing environment from mmc ...; " \
 123                 "env import -t -r $loadaddr $filesize\0" \
 124         "ramargs=setenv bootargs console=${console} " \
 125                 "${optargs} " \
 126                 "root=${ramroot} " \
 127                 "rootfstype=${ramrootfstype}\0" \
 128         "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
 129         "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
 130         "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 131         "mmcloados=run mmcargs; " \
 132                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 133                         "if run loadfdt; then " \
 134                                 "bootz ${loadaddr} - ${fdtaddr}; " \
 135                         "else " \
 136                                 "if test ${boot_fdt} = try; then " \
 137                                         "bootz; " \
 138                                 "else " \
 139                                         "echo WARN: Cannot load the DT; " \
 140                                 "fi; " \
 141                         "fi; " \
 142                 "else " \
 143                         "bootz; " \
 144                 "fi;\0" \
 145         "mmcboot=mmc dev ${mmcdev}; " \
 146                 "if mmc rescan; then " \
 147                         "echo SD/MMC found on device ${mmcdev};" \
 148                         "if run loadbootscript; then " \
 149                                 "run bootscript;" \
 150                         "else " \
 151                                 "if run loadbootenv; then " \
 152                                         "echo Loaded environment from ${bootenv};" \
 153                                         "run importbootenv;" \
 154                                 "fi;" \
 155                                 "if test -n $uenvcmd; then " \
 156                                         "echo Running uenvcmd ...;" \
 157                                         "run uenvcmd;" \
 158                                 "fi;" \
 159                                 "if run loadimage; then " \
 160                                         "run mmcloados;" \
 161                                 "fi;" \
 162                         "fi ;" \
 163                 "fi;\0" \
 164         "spiboot=echo Booting from spi ...; " \
 165                 "run spiargs; " \
 166                 "sf probe ${spibusno}:0; " \
 167                 "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
 168                 "bootz ${loadaddr}\0" \
 169         "netboot=echo Booting from network ...; " \
 170                 "setenv autoload no; " \
 171                 "dhcp; " \
 172                 "tftp ${loadaddr} ${bootfile}; " \
 173                 "tftp ${fdtaddr} ${fdtfile}; " \
 174                 "run netargs; " \
 175                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 176         "ramboot=echo Booting from ramdisk ...; " \
 177                 "run ramargs; " \
 178                 "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
 179         "findfdt="\
 180                 "if test $board_name = A335BONE; then " \
 181                         "setenv fdtfile am335x-bone.dtb; fi; " \
 182                 "if test $board_name = A335BNLT; then " \
 183                         "setenv fdtfile am335x-boneblack.dtb; fi; " \
 184                 "if test $board_name = A33515BB; then " \
 185                         "setenv fdtfile am335x-evm.dtb; fi; " \
 186                 "if test $board_name = A335X_SK; then " \
 187                         "setenv fdtfile am335x-evmsk.dtb; fi; " \
 188                 "if test $fdtfile = undefined; then " \
 189                         "echo WARNING: Could not determine device tree to use; fi; \0" \
 190         NANDARGS \
 191         DFUARGS
 192 #endif
 193
 194 #define CONFIG_BOOTCOMMAND \
 195         "run findfdt; " \
 196         "run mmcboot;" \
 197         "setenv mmcdev 1; " \
 198         "setenv bootpart 1:2; " \
 199         "run mmcboot;" \
 200         "run nandboot;"
 201
 202 /* NS16550 Configuration */
 203 #define CONFIG_SYS_NS16550_COM1         0x44e09000      /* Base EVM has UART0 */
 204 #define CONFIG_SYS_NS16550_COM2         0x48022000      /* UART1 */
 205 #define CONFIG_SYS_NS16550_COM3         0x48024000      /* UART2 */
 206 #define CONFIG_SYS_NS16550_COM4         0x481a6000      /* UART3 */
 207 #define CONFIG_SYS_NS16550_COM5         0x481a8000      /* UART4 */
 208 #define CONFIG_SYS_NS16550_COM6         0x481aa000      /* UART5 */
 209 #define CONFIG_BAUDRATE                 115200
 210
 211 #define CONFIG_CMD_EEPROM
 212 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 213 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50    /* Main EEPROM */
 214 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 215 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 216
 217 /* PMIC support */
 218 #define CONFIG_POWER_TPS65217
 219 #define CONFIG_POWER_TPS65910
 220
 221 /* SPL */
 222 #ifndef CONFIG_NOR_BOOT
 223 #define CONFIG_SPL_POWER_SUPPORT
 224 #define CONFIG_SPL_YMODEM_SUPPORT
 225
 226 /* Bootcount using the RTC block */
 227 #define CONFIG_BOOTCOUNT_LIMIT
 228 #define CONFIG_BOOTCOUNT_AM33XX
 229
 230 /* USB gadget RNDIS */
 231 #define CONFIG_SPL_MUSB_NEW_SUPPORT
 232
 233 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/am33xx/u-boot-spl.lds"
 234 #endif
 235
 236 #ifdef CONFIG_NAND
 237 /* NAND: device related configs */
 238 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 239 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 240                                          CONFIG_SYS_NAND_PAGE_SIZE)
 241 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 242 #define CONFIG_SYS_NAND_OOBSIZE         64
 243 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 244 /* NAND: driver related configs */
 245 #define CONFIG_NAND_OMAP_GPMC
 246 #define CONFIG_NAND_OMAP_ELM
 247 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 248 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 249                                          10, 11, 12, 13, 14, 15, 16, 17, \
 250                                          18, 19, 20, 21, 22, 23, 24, 25, \
 251                                          26, 27, 28, 29, 30, 31, 32, 33, \
 252                                          34, 35, 36, 37, 38, 39, 40, 41, \
 253                                          42, 43, 44, 45, 46, 47, 48, 49, \
 254                                          50, 51, 52, 53, 54, 55, 56, 57, }
 255
 256 #define CONFIG_SYS_NAND_ECCSIZE         512
 257 #define CONFIG_SYS_NAND_ECCBYTES        14
 258 #define CONFIG_SYS_NAND_ONFI_DETECTION
 259 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
 260 #define MTDIDS_DEFAULT                  "nand0=nand.0"
 261 #define MTDPARTS_DEFAULT                "mtdparts=nand.0:" \
 262                                         "128k(NAND.SPL)," \
 263                                         "128k(NAND.SPL.backup1)," \
 264                                         "128k(NAND.SPL.backup2)," \
 265                                         "128k(NAND.SPL.backup3)," \
 266                                         "256k(NAND.u-boot-spl-os)," \
 267                                         "1m(NAND.u-boot)," \
 268                                         "128k(NAND.u-boot-env)," \
 269                                         "128k(NAND.u-boot-env.backup1)," \
 270                                         "8m(NAND.kernel)," \
 271                                         "-(NAND.rootfs)"
 272 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x000c0000
 273 #undef CONFIG_ENV_IS_NOWHERE
 274 #define CONFIG_ENV_IS_IN_NAND
 275 #define CONFIG_ENV_OFFSET               0x001c0000
 276 #define CONFIG_ENV_OFFSET_REDUND        0x001e0000
 277 #define CONFIG_SYS_ENV_SECT_SIZE        CONFIG_SYS_NAND_BLOCK_SIZE
 278 /* NAND: SPL related configs */
 279 #ifdef CONFIG_SPL_NAND_SUPPORT
 280 #define CONFIG_SPL_NAND_AM33XX_BCH
 281 #endif
 282 #ifdef CONFIG_SPL_OS_BOOT
 283 #define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
 284 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
 285 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
 286 #endif
 287 #endif /* !CONFIG_NAND */
 288
 289 /*
 290  * For NOR boot, we must set this to the start of where NOR is mapped
 291  * in memory.
 292  */
 293 #ifdef CONFIG_NOR_BOOT
 294 #define CONFIG_SYS_TEXT_BASE            0x08000000
 295 #endif
 296
 297 /*
 298  * USB configuration.  We enable MUSB support, both for host and for
 299  * gadget.  We set USB0 as peripheral and USB1 as host, based on the
 300  * board schematic and physical port wired to each.  Then for host we
 301  * add mass storage support and for gadget we add both RNDIS ethernet
 302  * and DFU.
 303  */
 304 #define CONFIG_USB_MUSB_DSPS
 305 #define CONFIG_ARCH_MISC_INIT
 306 #define CONFIG_MUSB_GADGET
 307 #define CONFIG_MUSB_PIO_ONLY
 308 #define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
 309 #define CONFIG_USB_GADGET
 310 #define CONFIG_USBDOWNLOAD_GADGET
 311 #define CONFIG_USB_GADGET_DUALSPEED
 312 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 313 #define CONFIG_MUSB_HOST
 314 #define CONFIG_AM335X_USB0
 315 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
 316 #define CONFIG_AM335X_USB1
 317 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 318
 319 #ifdef CONFIG_MUSB_HOST
 320 #define CONFIG_CMD_USB
 321 #define CONFIG_USB_STORAGE
 322 #endif
 323
 324 #ifdef CONFIG_MUSB_GADGET
 325 #define CONFIG_USB_ETHER
 326 #define CONFIG_USB_ETH_RNDIS
 327 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
 328
 329 /* USB TI's IDs */
 330 #define CONFIG_G_DNL_VENDOR_NUM 0x0403
 331 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
 332 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
 333 #endif /* CONFIG_MUSB_GADGET */
 334
 335 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
 336 /* disable host part of MUSB in SPL */
 337 #undef CONFIG_MUSB_HOST
 338 /* disable EFI partitions and partition UUID support */
 339 #undef CONFIG_PARTITION_UUIDS
 340 #undef CONFIG_EFI_PARTITION
 341 /* General network SPL  */
 342 #define CONFIG_SPL_NET_SUPPORT
 343 #define CONFIG_SPL_ENV_SUPPORT
 344 #define CONFIG_SPL_NET_VCI_STRING       "AM335x U-Boot SPL"
 345 #endif
 346
 347 /* USB Device Firmware Update support */
 348 #ifndef CONFIG_SPL_BUILD
 349 #define CONFIG_DFU_FUNCTION
 350 #define CONFIG_DFU_MMC
 351 #define CONFIG_CMD_DFU
 352 #define DFU_ALT_INFO_MMC \
 353         "dfu_alt_info_mmc=" \
 354         "boot part 0 1;" \
 355         "rootfs part 0 2;" \
 356         "MLO fat 0 1;" \
 357         "MLO.raw mmc 0x100 0x100;" \
 358         "u-boot.img.raw mmc 0x300 0x400;" \
 359         "spl-os-args.raw mmc 0x80 0x80;" \
 360         "spl-os-image.raw mmc 0x900 0x2000;" \
 361         "spl-os-args fat 0 1;" \
 362         "spl-os-image fat 0 1;" \
 363         "u-boot.img fat 0 1;" \
 364         "uEnv.txt fat 0 1\0"
 365 #ifdef CONFIG_NAND
 366 #define CONFIG_DFU_NAND
 367 #define DFU_ALT_INFO_NAND \
 368         "dfu_alt_info_nand=" \
 369         "SPL part 0 1;" \
 370         "SPL.backup1 part 0 2;" \
 371         "SPL.backup2 part 0 3;" \
 372         "SPL.backup3 part 0 4;" \
 373         "u-boot part 0 5;" \
 374         "u-boot-spl-os part 0 6;" \
 375         "kernel part 0 8;" \
 376         "rootfs part 0 9\0"
 377 #else
 378 #define DFU_ALT_INFO_NAND ""
 379 #endif
 380 #define CONFIG_DFU_RAM
 381 #define DFU_ALT_INFO_RAM \
 382         "dfu_alt_info_ram=" \
 383         "kernel ram 0x80200000 0xD80000;" \
 384         "fdt ram 0x80F80000 0x80000;" \
 385         "ramdisk ram 0x81000000 0x4000000\0"
 386 #define DFUARGS \
 387         "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
 388         DFU_ALT_INFO_MMC \
 389         DFU_ALT_INFO_RAM \
 390         DFU_ALT_INFO_NAND
 391 #endif
 392
 393 /*
 394  * Default to using SPI for environment, etc.
 395  * 0x000000 - 0x020000 : SPL (128KiB)
 396  * 0x020000 - 0x0A0000 : U-Boot (512KiB)
 397  * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB)
 398  * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB)
 399  * 0x0E0000 - 0x442000 : Linux Kernel
 400  * 0x442000 - 0x800000 : Userland
 401  */
 402 #if defined(CONFIG_SPI_BOOT)
 403 /* SPL related */
 404 #undef CONFIG_SPL_OS_BOOT               /* Not supported by existing map */
 405 #define CONFIG_SPL_SPI_SUPPORT
 406 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 407 #define CONFIG_SPL_SPI_LOAD
 408 #define CONFIG_SPL_SPI_BUS              0
 409 #define CONFIG_SPL_SPI_CS               0
 410 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
 411
 412 #define CONFIG_ENV_IS_IN_SPI_FLASH
 413 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 414 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 415 #define CONFIG_ENV_SECT_SIZE            (4 << 10) /* 4 KB sectors */
 416 #define CONFIG_ENV_OFFSET               (768 << 10) /* 768 KiB in */
 417 #define CONFIG_ENV_OFFSET_REDUND        (896 << 10) /* 896 KiB in */
 418 #define MTDIDS_DEFAULT                  "nor0=m25p80-flash.0"
 419 #define MTDPARTS_DEFAULT                "mtdparts=m25p80-flash.0:128k(SPL)," \
 420                                         "512k(u-boot),128k(u-boot-env1)," \
 421                                         "128k(u-boot-env2),3464k(kernel)," \
 422                                         "-(rootfs)"
 423 #elif defined(CONFIG_EMMC_BOOT)
 424 #undef CONFIG_ENV_IS_NOWHERE
 425 #define CONFIG_ENV_IS_IN_MMC
 426 #define CONFIG_SPL_ENV_SUPPORT
 427 #define CONFIG_SYS_MMC_ENV_DEV          1
 428 #define CONFIG_SYS_MMC_ENV_PART         2
 429 #define CONFIG_ENV_OFFSET               0x0
 430 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 431 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 432 #endif
 433
 434 /* SPI flash. */
 435 #define CONFIG_CMD_SF
 436 #define CONFIG_SPI_FLASH
 437 #define CONFIG_SPI_FLASH_WINBOND
 438 #define CONFIG_SF_DEFAULT_SPEED         24000000
 439
 440 /* Network. */
 441 #define CONFIG_PHY_GIGE
 442 #define CONFIG_PHYLIB
 443 #define CONFIG_PHY_SMSC
 444
 445 /*
 446  * NOR Size = 16 MiB
 447  * Number of Sectors/Blocks = 128
 448  * Sector Size = 128 KiB
 449  * Word length = 16 bits
 450  * Default layout:
 451  * 0x000000 - 0x07FFFF : U-Boot (512 KiB)
 452  * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB)
 453  * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB)
 454  * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB)
 455  * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB)
 456  */
 457 #if defined(CONFIG_NOR)
 458 #undef CONFIG_SYS_NO_FLASH
 459 #define CONFIG_CMD_FLASH
 460 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 461 #define CONFIG_SYS_FLASH_PROTECTION
 462 #define CONFIG_SYS_FLASH_CFI
 463 #define CONFIG_FLASH_CFI_DRIVER
 464 #define CONFIG_FLASH_CFI_MTD
 465 #define CONFIG_SYS_MAX_FLASH_SECT       128
 466 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 467 #define CONFIG_SYS_FLASH_BASE           (0x08000000)
 468 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 469 #define CONFIG_SYS_FLASH_SIZE           0x01000000
 470 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 471 /* Reduce SPL size by removing unlikey targets */
 472 #ifdef CONFIG_NOR_BOOT
 473 #define CONFIG_ENV_IS_IN_FLASH
 474 #define CONFIG_ENV_SECT_SIZE            (128 << 10)     /* 128 KiB */
 475 #define CONFIG_ENV_OFFSET               (512 << 10)     /* 512 KiB */
 476 #define CONFIG_ENV_OFFSET_REDUND        (768 << 10)     /* 768 KiB */
 477 #define MTDIDS_DEFAULT                  "nor0=physmap-flash.0"
 478 #define MTDPARTS_DEFAULT                "mtdparts=physmap-flash.0:" \
 479                                         "512k(u-boot)," \
 480                                         "128k(u-boot-env1)," \
 481                                         "128k(u-boot-env2)," \
 482                                         "4m(kernel),-(rootfs)"
 483 #endif
 484 #endif  /* NOR support */
 485
 486 #endif  /* ! __CONFIG_AM335X_EVM_H */