4 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation version 2.
10 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
11 * kind, whether express or implied; without even the implied warranty
12 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
16 #ifndef __CONFIG_AM335X_EVM_H
17 #define __CONFIG_AM335X_EVM_H
21 #include <asm/arch/omap.h>
23 #define CONFIG_DMA_COHERENT
24 #define CONFIG_DMA_COHERENT_SIZE (1 << 20)
26 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
27 #define CONFIG_SYS_MALLOC_LEN (1024 << 10)
28 #define CONFIG_SYS_LONGHELP /* undef to save memory */
29 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
30 #define CONFIG_SYS_PROMPT "U-Boot# "
31 #define CONFIG_BOARD_LATE_INIT
32 #define CONFIG_SYS_NO_FLASH
33 #define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
34 #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
36 #define CONFIG_OF_LIBFDT
37 #define CONFIG_CMD_BOOTZ
38 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
39 #define CONFIG_SETUP_MEMORY_TAGS
40 #define CONFIG_INITRD_TAG
42 #define CONFIG_SYS_CACHELINE_SIZE 64
44 /* commands to include */
45 #include <config_cmd_default.h>
47 #define CONFIG_CMD_ASKENV
48 #define CONFIG_VERSION_VARIABLE
50 /* set to negative value for no autoboot */
51 #define CONFIG_BOOTDELAY 1
52 #define CONFIG_ENV_VARS_UBOOT_CONFIG
53 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
54 #ifndef CONFIG_SPL_BUILD
55 #define CONFIG_EXTRA_ENV_SETTINGS \
56 "loadaddr=0x80200000\0" \
57 "fdtaddr=0x80F80000\0" \
58 "fdt_high=0xffffffff\0" \
59 "rdaddr=0x81000000\0" \
63 "console=ttyO0,115200n8\0" \
66 "mmcroot=/dev/mmcblk0p2 ro\0" \
67 "mmcrootfstype=ext4 rootwait\0" \
69 "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
70 "nandrootfstype=ubifs rootwait=1\0" \
71 "nandsrcaddr=0x280000\0" \
72 "nandimgsize=0x500000\0" \
73 "rootpath=/export/rootfs\0" \
75 "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
77 "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
78 "ramrootfstype=ext2\0" \
79 "mmcargs=setenv bootargs console=${console} " \
82 "rootfstype=${mmcrootfstype}\0" \
83 "nandargs=setenv bootargs console=${console} " \
86 "rootfstype=${nandrootfstype}\0" \
87 "spiroot=/dev/mtdblock4 rw\0" \
88 "spirootfstype=jffs2\0" \
89 "spisrcaddr=0xe0000\0" \
90 "spiimgsize=0x362000\0" \
92 "spiargs=setenv bootargs console=${console} " \
95 "rootfstype=${spirootfstype}\0" \
96 "netargs=setenv bootargs console=${console} " \
99 "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
101 "bootenv=uEnv.txt\0" \
102 "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
103 "importbootenv=echo Importing environment from mmc ...; " \
104 "env import -t $loadaddr $filesize\0" \
105 "ramargs=setenv bootargs console=${console} " \
108 "rootfstype=${ramrootfstype}\0" \
109 "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
110 "loaduimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
111 "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
112 "mmcboot=echo Booting from mmc ...; " \
114 "bootm ${loadaddr} - ${fdtaddr}\0" \
115 "nandboot=echo Booting from nand ...; " \
117 "nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
118 "bootm ${loadaddr}\0" \
119 "spiboot=echo Booting from spi ...; " \
121 "sf probe ${spibusno}:0; " \
122 "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
123 "bootm ${loadaddr}\0" \
124 "netboot=echo Booting from network ...; " \
125 "setenv autoload no; " \
127 "tftp ${loadaddr} ${bootfile}; " \
128 "tftp ${fdtaddr} ${fdtfile}; " \
130 "bootm ${loadaddr} - ${fdtaddr}\0" \
131 "ramboot=echo Booting from ramdisk ...; " \
133 "bootm ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
135 "if test $board_name = A335BONE; then " \
136 "setenv fdtfile am335x-bone.dtb; fi; " \
137 "if test $board_name = A335BNLT; then " \
138 "setenv fdtfile am335x-boneblack.dtb; fi; " \
139 "if test $board_name = A33515BB; then " \
140 "setenv fdtfile am335x-evm.dtb; fi; " \
141 "if test $board_name = A335X_SK; then " \
142 "setenv fdtfile am335x-evmsk.dtb; fi\0" \
146 #define CONFIG_BOOTCOMMAND \
148 "mmc dev ${mmcdev}; if mmc rescan; then " \
149 "echo SD/MMC found on device ${mmcdev};" \
150 "if run loadbootenv; then " \
151 "echo Loaded environment from ${bootenv};" \
152 "run importbootenv;" \
154 "if test -n $uenvcmd; then " \
155 "echo Running uenvcmd ...;" \
158 "if run loaduimage; then " \
167 #define V_OSCK 24000000 /* Clock output from T2 */
168 #define V_SCLK (V_OSCK)
170 #define CONFIG_CMD_ECHO
172 /* max number of command args */
173 #define CONFIG_SYS_MAXARGS 16
175 /* Console I/O Buffer Size */
176 #define CONFIG_SYS_CBSIZE 512
178 /* Print Buffer Size */
179 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
180 + sizeof(CONFIG_SYS_PROMPT) + 16)
182 /* Boot Argument Buffer Size */
183 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
186 * memtest works on 8 MB in DRAM after skipping 32MB from
187 * start addr of ram disk
189 #define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024))
190 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
193 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
194 #define CONFIG_SYS_HZ 1000 /* 1ms clock */
197 #define CONFIG_GENERIC_MMC
198 #define CONFIG_OMAP_HSMMC
199 #define CONFIG_CMD_MMC
200 #define CONFIG_DOS_PARTITION
201 #define CONFIG_CMD_FAT
202 #define CONFIG_CMD_EXT2
203 #define CONFIG_CMD_EXT4
204 #define CONFIG_CMD_FS_GENERIC
207 #define CONFIG_OMAP3_SPI
208 #define CONFIG_MTD_DEVICE
209 #define CONFIG_SPI_FLASH
210 #define CONFIG_SPI_FLASH_WINBOND
211 #define CONFIG_CMD_SF
212 #define CONFIG_SF_DEFAULT_SPEED (24000000)
214 /* Physical Memory Map */
215 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
216 #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
217 #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
219 #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
220 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
221 GENERATED_GBL_DATA_SIZE)
222 /* Platform/Board specific defs */
223 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
224 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
225 #define CONFIG_SYS_HZ 1000
227 /* NS16550 Configuration */
228 #define CONFIG_SYS_NS16550
229 #define CONFIG_SYS_NS16550_SERIAL
230 #define CONFIG_SERIAL_MULTI
231 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
232 #define CONFIG_SYS_NS16550_CLK (48000000)
233 #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
234 #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
235 #define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
236 #define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
237 #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
238 #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
240 /* I2C Configuration */
242 #define CONFIG_CMD_I2C
243 #define CONFIG_HARD_I2C
244 #define CONFIG_SYS_I2C_SPEED 100000
245 #define CONFIG_SYS_I2C_SLAVE 1
246 #define CONFIG_I2C_MULTI_BUS
247 #define CONFIG_DRIVER_OMAP24XX_I2C
248 #define CONFIG_CMD_EEPROM
249 #define CONFIG_ENV_EEPROM_IS_ON_I2C
250 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
251 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
252 #define CONFIG_SYS_I2C_MULTI_EEPROMS
254 #define CONFIG_OMAP_GPIO
256 #define CONFIG_BAUDRATE 115200
257 #define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \
258 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
260 #define CONFIG_ENV_OVERWRITE 1
261 #define CONFIG_SYS_CONSOLE_INFO_QUIET
263 #define CONFIG_ENV_IS_NOWHERE
265 /* Defines for SPL */
267 #define CONFIG_SPL_FRAMEWORK
268 #define CONFIG_SPL_TEXT_BASE 0x402F0400
269 #define CONFIG_SPL_MAX_SIZE (101 * 1024)
270 #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
272 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
273 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
275 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
276 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
277 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
278 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
279 #define CONFIG_SPL_MMC_SUPPORT
280 #define CONFIG_SPL_FAT_SUPPORT
281 #define CONFIG_SPL_I2C_SUPPORT
283 #define CONFIG_SPL_LIBCOMMON_SUPPORT
284 #define CONFIG_SPL_LIBDISK_SUPPORT
285 #define CONFIG_SPL_LIBGENERIC_SUPPORT
286 #define CONFIG_SPL_SERIAL_SUPPORT
287 #define CONFIG_SPL_GPIO_SUPPORT
288 #define CONFIG_SPL_YMODEM_SUPPORT
289 #define CONFIG_SPL_NET_SUPPORT
290 #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
291 #define CONFIG_SPL_ETH_SUPPORT
292 #define CONFIG_SPL_SPI_SUPPORT
293 #define CONFIG_SPL_SPI_FLASH_SUPPORT
294 #define CONFIG_SPL_SPI_LOAD
295 #define CONFIG_SPL_SPI_BUS 0
296 #define CONFIG_SPL_SPI_CS 0
297 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x80000
298 #define CONFIG_SPL_MUSB_NEW_SUPPORT
299 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
301 #define CONFIG_SPL_BOARD_INIT
302 #define CONFIG_SPL_NAND_AM33XX_BCH
303 #define CONFIG_SPL_NAND_SUPPORT
304 #define CONFIG_SPL_NAND_BASE
305 #define CONFIG_SPL_NAND_DRIVERS
306 #define CONFIG_SPL_NAND_ECC
307 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
308 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
309 CONFIG_SYS_NAND_PAGE_SIZE)
310 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
311 #define CONFIG_SYS_NAND_OOBSIZE 64
312 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
313 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
314 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
315 10, 11, 12, 13, 14, 15, 16, 17, \
316 18, 19, 20, 21, 22, 23, 24, 25, \
317 26, 27, 28, 29, 30, 31, 32, 33, \
318 34, 35, 36, 37, 38, 39, 40, 41, \
319 42, 43, 44, 45, 46, 47, 48, 49, \
320 50, 51, 52, 53, 54, 55, 56, 57, }
322 #define CONFIG_SYS_NAND_ECCSIZE 512
323 #define CONFIG_SYS_NAND_ECCBYTES 14
325 #define CONFIG_SYS_NAND_ECCSTEPS 4
326 #define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
327 CONFIG_SYS_NAND_ECCSTEPS)
329 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
331 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
334 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
335 * 64 bytes before this address should be set aside for u-boot.img's
336 * header. That is 0x800FFFC0--0x80100000 should not be used for any
339 #define CONFIG_SYS_TEXT_BASE 0x80800000
340 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
341 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
343 /* Since SPL did pll and ddr initialization for us,
344 * we don't need to do it twice.
346 #ifndef CONFIG_SPL_BUILD
347 #define CONFIG_SKIP_LOWLEVEL_INIT
353 #define CONFIG_USB_MUSB_DSPS
354 #define CONFIG_ARCH_MISC_INIT
355 #define CONFIG_MUSB_GADGET
356 #define CONFIG_MUSB_PIO_ONLY
357 #define CONFIG_USB_GADGET_DUALSPEED
358 #define CONFIG_MUSB_HOST
359 #define CONFIG_AM335X_USB0
360 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
361 #define CONFIG_AM335X_USB1
362 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
364 #ifdef CONFIG_MUSB_HOST
365 #define CONFIG_CMD_USB
366 #define CONFIG_USB_STORAGE
369 #ifdef CONFIG_MUSB_GADGET
370 #define CONFIG_USB_ETHER
371 #define CONFIG_USB_ETH_RNDIS
372 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
373 #endif /* CONFIG_MUSB_GADGET */
375 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
376 /* disable host part of MUSB in SPL */
377 #undef CONFIG_MUSB_HOST
379 * Disable CPSW SPL support so we fit within the 101KiB limit.
381 #undef CONFIG_SPL_ETH_SUPPORT
385 * Default to using SPI for environment, etc. We have multiple copies
386 * of SPL as the ROM will check these locations.
387 * 0x0 - 0x20000 : First copy of SPL
388 * 0x20000 - 0x40000 : Second copy of SPL
389 * 0x40000 - 0x60000 : Third copy of SPL
390 * 0x60000 - 0x80000 : Fourth copy of SPL
391 * 0x80000 - 0xDF000 : U-Boot
392 * 0xDF000 - 0xE0000 : U-Boot Environment
393 * 0xE0000 - 0x442000 : Linux Kernel
394 * 0x442000 - 0x800000 : Userland
396 #if defined(CONFIG_SPI_BOOT)
397 # undef CONFIG_ENV_IS_NOWHERE
398 # define CONFIG_ENV_IS_IN_SPI_FLASH
399 # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
400 # define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */
401 # define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
402 #endif /* SPI support */
404 /* Unsupported features */
405 #undef CONFIG_USE_IRQ
407 #define CONFIG_CMD_NET
408 #define CONFIG_CMD_DHCP
409 #define CONFIG_CMD_PING
410 #define CONFIG_DRIVER_TI_CPSW
412 #define CONFIG_BOOTP_DEFAULT
413 #define CONFIG_BOOTP_DNS
414 #define CONFIG_BOOTP_DNS2
415 #define CONFIG_BOOTP_SEND_HOSTNAME
416 #define CONFIG_BOOTP_GATEWAY
417 #define CONFIG_BOOTP_SUBNETMASK
418 #define CONFIG_NET_RETRY_COUNT 10
419 #define CONFIG_NET_MULTI
420 #define CONFIG_PHY_GIGE
421 #define CONFIG_PHYLIB
422 #define CONFIG_PHY_ADDR 0
423 #define CONFIG_PHY_SMSC
428 #define CONFIG_CMD_NAND
429 #define CONFIG_NAND_OMAP_GPMC
430 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1
431 #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */
432 /* to access nand at */
434 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND
436 #if !defined(CONFIG_SPI_BOOT)
437 #undef CONFIG_ENV_IS_NOWHERE
438 #define CONFIG_ENV_IS_IN_NAND
439 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
440 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
444 #endif /* ! __CONFIG_AM335X_EVM_H */