include/configs/bg0900.h

   1 /*
   2  * Copyright (C) 2013 Marek Vasut <marex@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6 #ifndef __CONFIGS_BG0900_H__
   7 #define __CONFIGS_BG0900_H__
   8
   9 /* System configurations */
  10
  11 /* U-Boot Commands */
  12 #define CONFIG_SYS_NO_FLASH
  13 #include <config_cmd_default.h>
  14 #define CONFIG_DISPLAY_CPUINFO
  15 #define CONFIG_DOS_PARTITION
  16
  17 #define CONFIG_CMD_BOOTZ
  18 #define CONFIG_CMD_CACHE
  19 #define CONFIG_CMD_DHCP
  20 #define CONFIG_CMD_GPIO
  21 #define CONFIG_CMD_MII
  22 #define CONFIG_CMD_NAND
  23 #define CONFIG_CMD_NAND_TRIMFFS
  24 #define CONFIG_CMD_NET
  25 #define CONFIG_CMD_NFS
  26 #define CONFIG_CMD_PING
  27 #define CONFIG_CMD_SAVEENV
  28 #define CONFIG_CMD_SF
  29 #define CONFIG_CMD_SPI
  30
  31 /* Memory configuration */
  32 #define CONFIG_NR_DRAM_BANKS            1               /* 1 bank of DRAM */
  33 #define PHYS_SDRAM_1                    0x40000000      /* Base address */
  34 #define PHYS_SDRAM_1_SIZE               0x10000000      /* Max 256 MB RAM */
  35 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  36
  37 /* Environment */
  38 #define CONFIG_ENV_SIZE                 (16 * 1024)
  39 #define CONFIG_ENV_OVERWRITE
  40 #define CONFIG_ENV_IS_NOWHERE
  41
  42 /* FEC Ethernet on SoC */
  43 #ifdef  CONFIG_CMD_NET
  44 #define CONFIG_FEC_MXC
  45 #define CONFIG_NET_MULTI
  46 #endif
  47
  48 /* SPI */
  49 #ifdef CONFIG_CMD_SPI
  50 #define CONFIG_DEFAULT_SPI_BUS          2
  51 #define CONFIG_DEFAULT_SPI_CS           0
  52 #define CONFIG_DEFAULT_SPI_MODE         SPI_MODE_0
  53
  54 /* SPI FLASH */
  55 #ifdef CONFIG_CMD_SF
  56 #define CONFIG_SPI_FLASH
  57 #define CONFIG_SPI_FLASH_BAR
  58 #define CONFIG_SPI_FLASH_STMICRO
  59 #define CONFIG_SF_DEFAULT_BUS           2
  60 #define CONFIG_SF_DEFAULT_CS            0
  61 #define CONFIG_SF_DEFAULT_SPEED         40000000
  62 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  63
  64 #define CONFIG_ENV_SPI_BUS              2
  65 #define CONFIG_ENV_SPI_CS               0
  66 #define CONFIG_ENV_SPI_MAX_HZ           40000000
  67 #define CONFIG_ENV_SPI_MODE             SPI_MODE_0
  68 #endif
  69
  70 #endif
  71
  72 /* Boot Linux */
  73 #define CONFIG_BOOTDELAY        3
  74 #define CONFIG_BOOTFILE         "uImage"
  75 #define CONFIG_BOOTARGS         "console=ttyAMA0,115200"
  76 #define CONFIG_BOOTCOMMAND      "bootm"
  77 #define CONFIG_LOADADDR         0x42000000
  78 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
  79
  80 /* Extra Environment */
  81 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  82         "update_spi_firmware_filename=u-boot.sb\0"                      \
  83         "update_spi_firmware_maxsz=0x80000\0"                           \
  84         "update_spi_firmware="  /* Update the SPI flash firmware */     \
  85                 "if sf probe 2:0 ; then "                               \
  86                 "if tftp ${update_spi_firmware_filename} ; then "       \
  87                 "sf erase 0x0 +${filesize} ; "                          \
  88                 "sf write ${loadaddr} 0x0 ${filesize} ; "               \
  89                 "fi ; "                                                 \
  90                 "fi\0"
  91
  92 /* The rest of the configuration is shared */
  93 #include <configs/mxs.h>
  94
  95 #endif /* __CONFIGS_BG0900_H__ */