]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/davinci_schmoogie.h
Merge branch 'u-boot/master' into u-boot-arm/master
[karo-tx-uboot.git] / include / configs / davinci_schmoogie.h
1 /*
2  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
3  *
4  * SPDX-License-Identifier:     GPL-2.0+ 
5  */
6
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9
10 /*=======*/
11 /* Board */
12 /*=======*/
13 #define SCHMOOGIE
14 #define CONFIG_SYS_NAND_LARGEPAGE
15 #define CONFIG_SYS_USE_NAND
16 #define MACH_TYPE_SCHMOOGIE 1255
17 #define CONFIG_MACH_TYPE MACH_TYPE_SCHMOOGIE
18
19 /*===================*/
20 /* SoC Configuration */
21 /*===================*/
22 #define CONFIG_ARM926EJS                        /* arm926ejs CPU core */
23 #define CONFIG_SYS_TIMERBASE            0x01c21400      /* use timer 0 */
24 #define CONFIG_SYS_HZ_CLOCK             27000000        /* Timer Input clock freq */
25 #define CONFIG_SYS_HZ                   1000
26 #define CONFIG_SOC_DM644X
27 /*=============*/
28 /* Memory Info */
29 /*=============*/
30 #define CONFIG_SYS_MALLOC_LEN           (0x10000 + 256*1024)    /* malloc() len */
31 #define CONFIG_SYS_MEMTEST_START        0x80000000      /* memtest start address */
32 #define CONFIG_SYS_MEMTEST_END          0x81000000      /* 16MB RAM test */
33 #define CONFIG_NR_DRAM_BANKS    1               /* we have 1 bank of DRAM */
34 #define PHYS_SDRAM_1            0x80000000      /* DDR Start */
35 #define PHYS_SDRAM_1_SIZE       0x08000000      /* DDR size 128MB */
36 #define DDR_4BANKS                              /* 4-bank DDR2 (128MB) */
37 /*====================*/
38 /* Serial Driver info */
39 /*====================*/
40 #define CONFIG_SYS_NS16550
41 #define CONFIG_SYS_NS16550_SERIAL
42 #define CONFIG_SYS_NS16550_REG_SIZE     -4      /* NS16550 register size, byteorder */
43 #define CONFIG_SYS_NS16550_COM1 0x01c20000      /* Base address of UART0 */
44 #define CONFIG_SYS_NS16550_CLK  CONFIG_SYS_HZ_CLOCK     /* Input clock to NS16550 */
45 #define CONFIG_CONS_INDEX       1               /* use UART0 for console */
46 #define CONFIG_BAUDRATE         115200          /* Default baud rate */
47 /*===================*/
48 /* I2C Configuration */
49 /*===================*/
50 #define CONFIG_HARD_I2C
51 #define CONFIG_DRIVER_DAVINCI_I2C
52 #define CONFIG_SYS_I2C_SPEED            80000   /* 100Kbps won't work, silicon bug */
53 #define CONFIG_SYS_I2C_SLAVE            10      /* Bogus, master-only in U-Boot */
54 /*==================================*/
55 /* Network & Ethernet Configuration */
56 /*==================================*/
57 #define CONFIG_DRIVER_TI_EMAC
58 #define CONFIG_MII
59 #define CONFIG_BOOTP_DEFAULT
60 #define CONFIG_BOOTP_DNS
61 #define CONFIG_BOOTP_DNS2
62 #define CONFIG_BOOTP_SEND_HOSTNAME
63 #define CONFIG_NET_RETRY_COUNT  10
64 #define CONFIG_OVERWRITE_ETHADDR_ONCE
65 /*=====================*/
66 /* Flash & Environment */
67 /*=====================*/
68 #undef CONFIG_ENV_IS_IN_FLASH
69 #define CONFIG_SYS_NO_FLASH
70 #define CONFIG_NAND_DAVINCI
71 #define CONFIG_SYS_NAND_CS              2
72 #define CONFIG_ENV_IS_IN_NAND           /* U-Boot env in NAND Flash  */
73 #define CONFIG_ENV_SECT_SIZE    2048    /* Env sector Size */
74 #define CONFIG_ENV_SIZE         (128 << 10)     /* 128 KiB */
75 #define CONFIG_SKIP_LOWLEVEL_INIT       /* U-Boot is loaded by a bootloader */
76 #define CONFIG_SYS_NAND_BASE            0x02000000
77 #define CONFIG_SYS_NAND_HW_ECC
78 #define CONFIG_SYS_MAX_NAND_DEVICE      1       /* Max number of NAND devices */
79 #define CONFIG_ENV_OFFSET               0x0     /* Block 0--not used by bootcode */
80 /*=====================*/
81 /* Board related stuff */
82 /*=====================*/
83 #define CONFIG_RTC_DS1307               /* RTC chip on SCHMOOGIE */
84 #define CONFIG_SYS_I2C_RTC_ADDR 0x6f    /* RTC chip I2C address */
85 #define CONFIG_UID_DS28CM00             /* Unique ID on SCHMOOGIE */
86 #define CONFIG_SYS_UID_ADDR             0x50    /* UID chip I2C address */
87 /*==============================*/
88 /* U-Boot general configuration */
89 /*==============================*/
90 #define CONFIG_MISC_INIT_R
91 #undef CONFIG_BOOTDELAY
92 #define CONFIG_BOOTFILE         "uImage"        /* Boot file name */
93 #define CONFIG_SYS_PROMPT               "U-Boot > "     /* Monitor Command Prompt */
94 #define CONFIG_SYS_CBSIZE               1024            /* Console I/O Buffer Size  */
95 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print buffer sz */
96 #define CONFIG_SYS_MAXARGS              16              /* max number of command args */
97 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
98 #define CONFIG_SYS_LOAD_ADDR            0x80700000      /* default Linux kernel load address */
99 #define CONFIG_VERSION_VARIABLE
100 #define CONFIG_AUTO_COMPLETE            /* Won't work with hush so far, may be later */
101 #define CONFIG_SYS_HUSH_PARSER
102 #define CONFIG_CMDLINE_EDITING
103 #define CONFIG_SYS_LONGHELP
104 #define CONFIG_CRC32_VERIFY
105 #define CONFIG_MX_CYCLIC
106 /*===================*/
107 /* Linux Information */
108 /*===================*/
109 #define LINUX_BOOT_PARAM_ADDR   0x80000100
110 #define CONFIG_CMDLINE_TAG
111 #define CONFIG_SETUP_MEMORY_TAGS
112 #define CONFIG_BOOTARGS         "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
113 #define CONFIG_BOOTCOMMAND      "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot"
114 /*=================*/
115 /* U-Boot commands */
116 /*=================*/
117 #include <config_cmd_default.h>
118 #define CONFIG_CMD_ASKENV
119 #define CONFIG_CMD_DHCP
120 #define CONFIG_CMD_DIAG
121 #define CONFIG_CMD_I2C
122 #define CONFIG_CMD_MII
123 #define CONFIG_CMD_PING
124 #define CONFIG_CMD_SAVES
125 #define CONFIG_CMD_DATE
126 #define CONFIG_CMD_NAND
127 #undef CONFIG_CMD_EEPROM
128 #undef CONFIG_CMD_BDI
129 #undef CONFIG_CMD_FPGA
130 #undef CONFIG_CMD_SETGETDCR
131 #undef CONFIG_CMD_FLASH
132 #undef CONFIG_CMD_IMLS
133
134 #ifdef CONFIG_CMD_BDI
135 #define CONFIG_CLOCKS
136 #endif
137
138 #define CONFIG_MAX_RAM_BANK_SIZE        (256 << 20)     /* 256 MB */
139
140 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
141 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000
142 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + \
143                                          CONFIG_SYS_INIT_RAM_SIZE - \
144                                          GENERATED_GBL_DATA_SIZE)
145
146 #endif /* __CONFIG_H */