include/configs/km/km-powerpc.h

   1 /*
   2  * (C) Copyright 2011
   3  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_KEYMILE_POWERPC_H
   9 #define __CONFIG_KEYMILE_POWERPC_H
  10
  11 /* Do boardspecific init for all boards */
  12 #define CONFIG_BOARD_EARLY_INIT_R
  13 #define CONFIG_LAST_STAGE_INIT
  14
  15 #define CONFIG_BOOTCOUNT_LIMIT
  16
  17 #define CONFIG_CMD_DTT
  18 #define CONFIG_JFFS2_CMDLINE
  19
  20 /* EEprom support 24C08, 24C16, 24C64 */
  21 #define CONFIG_SYS_I2C_MULTI_EEPROMS
  22 #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
  23 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3  /* 8 Byte write page */
  24 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
  25
  26 #define CONFIG_ENV_SIZE         0x04000         /* Size of Environment */
  27 #define CONFIG_FLASH_CFI_MTD
  28
  29 #define CONFIG_SYS_MEMTEST_START 0x00100000     /* memtest works on */
  30
  31 #define CONFIG_SYS_MEMTEST_END  0x00f00000      /* 1 ... 15 MB in DRAM  */
  32
  33 #define CONFIG_SYS_LOAD_ADDR    0x100000        /* default load address */
  34
  35 /******************************************************************************
  36  * (PRAM usage)
  37  * ... -------------------------------------------------------
  38  * ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM
  39  * ... |<------------------- pram -------------------------->|
  40  * ... -------------------------------------------------------
  41  * @END_OF_RAM:
  42  * @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose
  43  * @CONFIG_KM_PHRAM: address for /var
  44  * @CONFIG_KM_PNVRAM: address for PNVRAM (for the application)
  45  * @CONFIG_KM_ROOTFSSIZE: address for rootfilesystem in RAM
  46  */
  47
  48 /* size of rootfs in RAM */
  49 #define CONFIG_KM_ROOTFSSIZE    0x0
  50 /* pseudo-non volatile RAM [hex] */
  51 #define CONFIG_KM_PNVRAM        0x80000
  52 /* physical RAM MTD size [hex] */
  53 #define CONFIG_KM_PHRAM         0x100000
  54 /* resereved pram area at the end of memroy [hex] */
  55 #define CONFIG_KM_RESERVED_PRAM 0x0
  56 /* enable protected RAM */
  57 #define CONFIG_PRAM             0
  58
  59 #define CONFIG_KM_CRAMFS_ADDR   0x800000
  60 #define CONFIG_KM_KERNEL_ADDR   0x400000        /* 3968Kbytes */
  61 #define CONFIG_KM_FDT_ADDR      0x7E0000        /* 128Kbytes */
  62
  63 /* architecture specific default bootargs */
  64 #define CONFIG_KM_DEF_BOOT_ARGS_CPU             ""
  65
  66 #define CONFIG_KM_DEF_ENV_CPU                                           \
  67         "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0"                   \
  68         "cramfsloadfdt="                                                \
  69                 "cramfsload ${fdt_addr_r} "                             \
  70                 "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0"             \
  71         "fdt_addr_r=" __stringify(CONFIG_KM_FDT_ADDR) "\0"              \
  72         "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"           \
  73         "update="                                                       \
  74                 "protect off " __stringify(BOOTFLASH_START) " +${filesize} && "\
  75                 "erase " __stringify(BOOTFLASH_START) "  +${filesize} && "\
  76                 "cp.b ${load_addr_r} " __stringify(BOOTFLASH_START)     \
  77                 "  ${filesize} && "                                     \
  78                 "protect on " __stringify(BOOTFLASH_START) "  +${filesize}\0"\
  79         ""
  80
  81 #endif /* __CONFIG_KEYMILE_POWERPC_H */