include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12
  13 #include "mx6_common.h"
  14 #include <linux/sizes.h>
  15
  16 #define CONFIG_DISPLAY_CPUINFO
  17 #define CONFIG_DISPLAY_BOARDINFO
  18
  19 #include <asm/arch/imx-regs.h>
  20 #include <asm/imx-common/gpio.h>
  21
  22 #define CONFIG_CMDLINE_TAG
  23 #define CONFIG_SETUP_MEMORY_TAGS
  24 #define CONFIG_INITRD_TAG
  25 #define CONFIG_REVISION_TAG
  26
  27 #define CONFIG_IMX6_THERMAL
  28
  29 #define CONFIG_SYS_GENERIC_BOARD
  30
  31 /* Size of malloc() pool */
  32 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  33
  34 #define CONFIG_BOARD_EARLY_INIT_F
  35 #define CONFIG_BOARD_LATE_INIT
  36 #define CONFIG_MXC_GPIO
  37
  38 #define CONFIG_MXC_UART
  39
  40 #define CONFIG_CMD_FUSE
  41 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
  42 #define CONFIG_MXC_OCOTP
  43 #endif
  44
  45 /* MMC Configs */
  46 #define CONFIG_FSL_ESDHC
  47 #define CONFIG_FSL_USDHC
  48 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  49
  50 #define CONFIG_MMC
  51 #define CONFIG_CMD_MMC
  52 #define CONFIG_GENERIC_MMC
  53 #define CONFIG_BOUNCE_BUFFER
  54 #define CONFIG_CMD_EXT2
  55 #define CONFIG_CMD_FAT
  56 #define CONFIG_DOS_PARTITION
  57
  58 #define CONFIG_CMD_PING
  59 #define CONFIG_CMD_DHCP
  60 #define CONFIG_CMD_MII
  61 #define CONFIG_CMD_NET
  62 #define CONFIG_FEC_MXC
  63 #define CONFIG_MII
  64 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  65 #define CONFIG_FEC_XCV_TYPE             RGMII
  66 #define CONFIG_ETHPRIME                 "FEC"
  67 #define CONFIG_FEC_MXC_PHYADDR          1
  68
  69 #define CONFIG_PHYLIB
  70 #define CONFIG_PHY_ATHEROS
  71
  72 #define CONFIG_CMD_SF
  73 #ifdef CONFIG_CMD_SF
  74 #define CONFIG_SPI_FLASH
  75 #define CONFIG_SPI_FLASH_STMICRO
  76 #define CONFIG_MXC_SPI
  77 #define CONFIG_SF_DEFAULT_BUS           0
  78 #define CONFIG_SF_DEFAULT_CS            0
  79 #define CONFIG_SF_DEFAULT_SPEED         20000000
  80 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  81 #endif
  82
  83 /* allow to overwrite serial and ethaddr */
  84 #define CONFIG_ENV_OVERWRITE
  85 #define CONFIG_CONS_INDEX              1
  86 #define CONFIG_BAUDRATE                        115200
  87
  88 /* Command definition */
  89 #include <config_cmd_default.h>
  90
  91 #define CONFIG_CMD_BMODE
  92 #define CONFIG_CMD_BOOTZ
  93 #define CONFIG_CMD_SETEXPR
  94 #undef CONFIG_CMD_IMLS
  95
  96 #define CONFIG_BOOTDELAY               1
  97
  98 #define CONFIG_LOADADDR                        0x12000000
  99 #define CONFIG_SYS_TEXT_BASE           0x17800000
 100
 101 #ifdef CONFIG_SUPPORT_EMMC_BOOT
 102 #define EMMC_ENV \
 103         "emmcdev=2\0" \
 104         "update_emmc_firmware=" \
 105                 "if test ${ip_dyn} = yes; then " \
 106                         "setenv get_cmd dhcp; " \
 107                 "else " \
 108                         "setenv get_cmd tftp; " \
 109                 "fi; " \
 110                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 111                         "if mmc dev ${emmcdev} && " \
 112                                 "mmc open ${emmcdev} 1; then "  \
 113                                 "setexpr fw_sz ${filesize} / 0x200; " \
 114                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 115                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 116                                 "mmc close ${emmcdev} 1; " \
 117                         "fi; "  \
 118                 "fi\0"
 119 #else
 120 #define EMMC_ENV ""
 121 #endif
 122
 123 #define CONFIG_EXTRA_ENV_SETTINGS \
 124         "script=boot.scr\0" \
 125         "image=zImage\0" \
 126         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 127         "fdt_addr=0x18000000\0" \
 128         "boot_fdt=try\0" \
 129         "ip_dyn=yes\0" \
 130         "console=" CONFIG_CONSOLE_DEV "\0" \
 131         "fdt_high=0xffffffff\0"   \
 132         "initrd_high=0xffffffff\0" \
 133         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 134         "mmcpart=1\0" \
 135         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 136         "update_sd_firmware=" \
 137                 "if test ${ip_dyn} = yes; then " \
 138                         "setenv get_cmd dhcp; " \
 139                 "else " \
 140                         "setenv get_cmd tftp; " \
 141                 "fi; " \
 142                 "if mmc dev ${mmcdev}; then "   \
 143                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 144                                 "setexpr fw_sz ${filesize} / 0x200; " \
 145                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 146                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 147                         "fi; "  \
 148                 "fi\0" \
 149         EMMC_ENV          \
 150         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 151                 "root=${mmcroot}\0" \
 152         "loadbootscript=" \
 153                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 154         "bootscript=echo Running bootscript from mmc ...; " \
 155                 "source\0" \
 156         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 157         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 158         "mmcboot=echo Booting from mmc ...; " \
 159                 "run mmcargs; " \
 160                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 161                         "if run loadfdt; then " \
 162                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 163                         "else " \
 164                                 "if test ${boot_fdt} = try; then " \
 165                                         "bootz; " \
 166                                 "else " \
 167                                         "echo WARN: Cannot load the DT; " \
 168                                 "fi; " \
 169                         "fi; " \
 170                 "else " \
 171                         "bootz; " \
 172                 "fi;\0" \
 173         "netargs=setenv bootargs console=${console},${baudrate} " \
 174                 "root=/dev/nfs " \
 175                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 176         "netboot=echo Booting from net ...; " \
 177                 "run netargs; " \
 178                 "if test ${ip_dyn} = yes; then " \
 179                         "setenv get_cmd dhcp; " \
 180                 "else " \
 181                         "setenv get_cmd tftp; " \
 182                 "fi; " \
 183                 "${get_cmd} ${image}; " \
 184                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 185                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 186                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 187                         "else " \
 188                                 "if test ${boot_fdt} = try; then " \
 189                                         "bootz; " \
 190                                 "else " \
 191                                         "echo WARN: Cannot load the DT; " \
 192                                 "fi; " \
 193                         "fi; " \
 194                 "else " \
 195                         "bootz; " \
 196                 "fi;\0"
 197
 198 #define CONFIG_BOOTCOMMAND \
 199         "mmc dev ${mmcdev};" \
 200         "if mmc rescan; then " \
 201                 "if run loadbootscript; then " \
 202                 "run bootscript; " \
 203                 "else " \
 204                         "if run loadimage; then " \
 205                                 "run mmcboot; " \
 206                         "else run netboot; " \
 207                         "fi; " \
 208                 "fi; " \
 209         "else run netboot; fi"
 210
 211 #define CONFIG_ARP_TIMEOUT     200UL
 212
 213 /* Miscellaneous configurable options */
 214 #define CONFIG_SYS_LONGHELP
 215 #define CONFIG_SYS_HUSH_PARSER
 216 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 217 #define CONFIG_AUTO_COMPLETE
 218 #define CONFIG_SYS_CBSIZE              256
 219 #define CONFIG_SYS_MAXARGS             16
 220 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 221
 222 #define CONFIG_SYS_MEMTEST_START       0x10000000
 223 #define CONFIG_SYS_MEMTEST_END         0x10010000
 224 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 225
 226 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 227
 228 #define CONFIG_CMDLINE_EDITING
 229 #define CONFIG_STACKSIZE               (128 * 1024)
 230
 231 /* Physical Memory Map */
 232 #define CONFIG_NR_DRAM_BANKS           1
 233 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 234
 235 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 236 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 237 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 238
 239 #define CONFIG_SYS_INIT_SP_OFFSET \
 240         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 241 #define CONFIG_SYS_INIT_SP_ADDR \
 242         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 243
 244 /* FLASH and environment organization */
 245 #define CONFIG_SYS_NO_FLASH
 246
 247 #define CONFIG_ENV_SIZE                 (8 * 1024)
 248
 249 #define CONFIG_ENV_IS_IN_MMC
 250
 251 #if defined(CONFIG_ENV_IS_IN_MMC)
 252 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 253 #endif
 254
 255 #define CONFIG_OF_LIBFDT
 256
 257 #ifndef CONFIG_SYS_DCACHE_OFF
 258 #define CONFIG_CMD_CACHE
 259 #endif
 260
 261 /* Framebuffer */
 262 #define CONFIG_VIDEO
 263 #define CONFIG_VIDEO_IPUV3
 264 #define CONFIG_CFB_CONSOLE
 265 #define CONFIG_VGA_AS_SINGLE_DEVICE
 266 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 267 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 268 #define CONFIG_VIDEO_BMP_RLE8
 269 #define CONFIG_SPLASH_SCREEN
 270 #define CONFIG_SPLASH_SCREEN_ALIGN
 271 #define CONFIG_BMP_16BPP
 272 #define CONFIG_VIDEO_LOGO
 273 #define CONFIG_VIDEO_BMP_LOGO
 274 #define CONFIG_IPUV3_CLK 260000000
 275 #define CONFIG_IMX_HDMI
 276 #define CONFIG_IMX_VIDEO_SKIP
 277
 278 #define CONFIG_CI_UDC
 279 #define CONFIG_USBD_HS
 280 #define CONFIG_USB_GADGET_DUALSPEED
 281
 282 #define CONFIG_USB_GADGET
 283 #define CONFIG_CMD_USB_MASS_STORAGE
 284 #define CONFIG_USB_GADGET_MASS_STORAGE
 285 #define CONFIG_USBDOWNLOAD_GADGET
 286 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 287
 288 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 289 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 290 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 291
 292 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */