include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_IMX6_THERMAL
  15
  16 /* Size of malloc() pool */
  17 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20 #define CONFIG_BOARD_LATE_INIT
  21
  22 #define CONFIG_MXC_UART
  23
  24 #define CONFIG_CMD_FUSE
  25 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
  26 #define CONFIG_MXC_OCOTP
  27 #endif
  28
  29 /* MMC Configs */
  30 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  31
  32 #define CONFIG_CMD_PING
  33 #define CONFIG_CMD_DHCP
  34 #define CONFIG_CMD_MII
  35 #define CONFIG_FEC_MXC
  36 #define CONFIG_MII
  37 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  38 #define CONFIG_FEC_XCV_TYPE             RGMII
  39 #define CONFIG_ETHPRIME                 "FEC"
  40 #define CONFIG_FEC_MXC_PHYADDR          1
  41
  42 #define CONFIG_PHYLIB
  43 #define CONFIG_PHY_ATHEROS
  44
  45 #define CONFIG_CMD_SF
  46 #ifdef CONFIG_CMD_SF
  47 #define CONFIG_SPI_FLASH
  48 #define CONFIG_SPI_FLASH_STMICRO
  49 #define CONFIG_MXC_SPI
  50 #define CONFIG_SF_DEFAULT_BUS           0
  51 #define CONFIG_SF_DEFAULT_CS            0
  52 #define CONFIG_SF_DEFAULT_SPEED         20000000
  53 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  54 #endif
  55
  56 /* Command definition */
  57 #define CONFIG_CMD_BMODE
  58
  59 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  60 #define EMMC_ENV \
  61         "emmcdev=2\0" \
  62         "update_emmc_firmware=" \
  63                 "if test ${ip_dyn} = yes; then " \
  64                         "setenv get_cmd dhcp; " \
  65                 "else " \
  66                         "setenv get_cmd tftp; " \
  67                 "fi; " \
  68                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  69                         "if mmc dev ${emmcdev} 1; then "        \
  70                                 "setexpr fw_sz ${filesize} / 0x200; " \
  71                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  72                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  73                         "fi; "  \
  74                 "fi\0"
  75 #else
  76 #define EMMC_ENV ""
  77 #endif
  78
  79 #ifndef VIDEO_ARGS
  80 #define VIDEO_ARGS ""
  81 #endif
  82
  83 #ifndef VIDEO_ARGS_SCRIPT
  84 #define VIDEO_ARGS_SCRIPT ""
  85 #endif
  86
  87 #define CONFIG_EXTRA_ENV_SETTINGS \
  88         "script=boot.scr\0" \
  89         "image=zImage\0" \
  90         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
  91         "fdt_addr=0x18000000\0" \
  92         "boot_fdt=try\0" \
  93         "ip_dyn=yes\0" \
  94         "console=" CONFIG_CONSOLE_DEV "\0" \
  95         "fdt_high=0xffffffff\0"   \
  96         "initrd_high=0xffffffff\0" \
  97         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  98         "mmcpart=1\0" \
  99         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 100         "update_sd_firmware=" \
 101                 "if test ${ip_dyn} = yes; then " \
 102                         "setenv get_cmd dhcp; " \
 103                 "else " \
 104                         "setenv get_cmd tftp; " \
 105                 "fi; " \
 106                 "if mmc dev ${mmcdev}; then "   \
 107                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 108                                 "setexpr fw_sz ${filesize} / 0x200; " \
 109                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 110                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 111                         "fi; "  \
 112                 "fi\0" \
 113         EMMC_ENV          \
 114         "video_args_hdmi=setenv video_args $video_args " \
 115                 "video=mxcfb${fb}:dev=hdmi,1280x720M@60,if=RGB24\0" \
 116         "video_args_lvds=setenv video_args $video_args " \
 117                 "video=mxcfb${fb}:dev=ldb,LDB-XGA,if=RGB666\0" \
 118         "video_args_lcd=setenv video_args $video_args " \
 119                 "video=mxcfb${fb}:dev=lcd,CLAA-WVGA,if=RGB666\0" \
 120         "fb=0\0" \
 121         "video_interfaces=hdmi lvds lcd\0" \
 122         "video_args_script=" \
 123                 "for v in ${video_interfaces}; do " \
 124                         "run video_args_${v}; " \
 125                         "setexpr fb $fb + 1; " \
 126                 "done\0" \
 127         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 128                 "root=${mmcroot} " \
 129                 VIDEO_ARGS "\0" \
 130         "loadbootscript=" \
 131                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 132         "bootscript=echo Running bootscript from mmc ...; " \
 133                 "source\0" \
 134         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 135         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 136         "mmcboot=echo Booting from mmc ...; " \
 137                 VIDEO_ARGS_SCRIPT \
 138                 "run mmcargs; " \
 139                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 140                         "if run loadfdt; then " \
 141                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 142                         "else " \
 143                                 "if test ${boot_fdt} = try; then " \
 144                                         "bootz; " \
 145                                 "else " \
 146                                         "echo WARN: Cannot load the DT; " \
 147                                 "fi; " \
 148                         "fi; " \
 149                 "else " \
 150                         "bootz; " \
 151                 "fi;\0" \
 152         "netargs=setenv bootargs console=${console},${baudrate} " \
 153                 "root=/dev/nfs " \
 154                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 155         "netboot=echo Booting from net ...; " \
 156                 "run netargs; " \
 157                 "if test ${ip_dyn} = yes; then " \
 158                         "setenv get_cmd dhcp; " \
 159                 "else " \
 160                         "setenv get_cmd tftp; " \
 161                 "fi; " \
 162                 "${get_cmd} ${image}; " \
 163                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 164                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 165                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 166                         "else " \
 167                                 "if test ${boot_fdt} = try; then " \
 168                                         "bootz; " \
 169                                 "else " \
 170                                         "echo WARN: Cannot load the DT; " \
 171                                 "fi; " \
 172                         "fi; " \
 173                 "else " \
 174                         "bootz; " \
 175                 "fi;\0"
 176
 177 #define CONFIG_BOOTCOMMAND \
 178         "mmc dev ${mmcdev};" \
 179         "if mmc rescan; then " \
 180                 "if run loadbootscript; then " \
 181                 "run bootscript; " \
 182                 "else " \
 183                         "if run loadimage; then " \
 184                                 "run mmcboot; " \
 185                         "else run netboot; " \
 186                         "fi; " \
 187                 "fi; " \
 188         "else run netboot; fi"
 189
 190 #define CONFIG_ARP_TIMEOUT     200UL
 191
 192 #define CONFIG_SYS_MEMTEST_START       0x10000000
 193 #define CONFIG_SYS_MEMTEST_END         0x10010000
 194 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 195
 196 #define CONFIG_STACKSIZE               (128 * 1024)
 197
 198 /* Physical Memory Map */
 199 #define CONFIG_NR_DRAM_BANKS           1
 200 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 201
 202 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 203 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 204 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 205
 206 #define CONFIG_SYS_INIT_SP_OFFSET \
 207         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 208 #define CONFIG_SYS_INIT_SP_ADDR \
 209         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 210
 211 /* Environment organization */
 212 #define CONFIG_ENV_SIZE                 (8 * 1024)
 213
 214 #define CONFIG_ENV_IS_IN_MMC
 215
 216 #if defined(CONFIG_ENV_IS_IN_MMC)
 217 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 218 #endif
 219
 220 /* Framebuffer */
 221 #define CONFIG_VIDEO
 222 #define CONFIG_VIDEO_IPUV3
 223 #define CONFIG_CFB_CONSOLE
 224 #define CONFIG_VGA_AS_SINGLE_DEVICE
 225 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 226 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 227 #define CONFIG_VIDEO_BMP_RLE8
 228 #define CONFIG_SPLASH_SCREEN
 229 #define CONFIG_SPLASH_SCREEN_ALIGN
 230 #define CONFIG_BMP_16BPP
 231 #define CONFIG_VIDEO_LOGO
 232 #define CONFIG_VIDEO_BMP_LOGO
 233 #define CONFIG_IPUV3_CLK 260000000
 234 #define CONFIG_IMX_HDMI
 235 #define CONFIG_IMX_VIDEO_SKIP
 236
 237 #ifndef CONFIG_SPL
 238 #define CONFIG_CI_UDC
 239 #define CONFIG_USBD_HS
 240 #define CONFIG_USB_GADGET_DUALSPEED
 241
 242 #define CONFIG_USB_GADGET
 243 #define CONFIG_CMD_USB_MASS_STORAGE
 244 #define CONFIG_USB_GADGET_MASS_STORAGE
 245 #define CONFIG_USBDOWNLOAD_GADGET
 246 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 247
 248 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 249 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 250 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 251 #endif
 252
 253 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */