include/configs/nitrogen6x.h

   1 /*
   2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Boundary Devices Nitrogen6X
   5  * and Freescale i.MX6Q Sabre Lite boards.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include "mx6_common.h"
  14 #define CONFIG_MX6
  15 #define CONFIG_DISPLAY_CPUINFO
  16 #define CONFIG_DISPLAY_BOARDINFO
  17
  18 #define CONFIG_MACH_TYPE        3769
  19
  20 #include <asm/arch/imx-regs.h>
  21 #include <asm/imx-common/gpio.h>
  22
  23 #define CONFIG_CMDLINE_TAG
  24 #define CONFIG_SETUP_MEMORY_TAGS
  25 #define CONFIG_INITRD_TAG
  26 #define CONFIG_REVISION_TAG
  27 #define CONFIG_SYS_GENERIC_BOARD
  28
  29 /* Size of malloc() pool */
  30 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  31
  32 #define CONFIG_BOARD_EARLY_INIT_F
  33 #define CONFIG_MISC_INIT_R
  34 #define CONFIG_MXC_GPIO
  35 #define CONFIG_CI_UDC
  36 #define CONFIG_USBD_HS
  37 #define CONFIG_USB_GADGET_DUALSPEED
  38 #define CONFIG_USB_ETHER
  39 #define CONFIG_USB_ETH_CDC
  40 #define CONFIG_NETCONSOLE
  41
  42 #define CONFIG_CMD_FUSE
  43 #ifdef CONFIG_CMD_FUSE
  44 #define CONFIG_MXC_OCOTP
  45 #endif
  46
  47 #define CONFIG_MXC_UART
  48 #define CONFIG_MXC_UART_BASE           UART2_BASE
  49
  50 #define CONFIG_CMD_SF
  51 #ifdef CONFIG_CMD_SF
  52 #define CONFIG_SPI_FLASH
  53 #define CONFIG_SPI_FLASH_SST
  54 #define CONFIG_MXC_SPI
  55 #define CONFIG_SF_DEFAULT_BUS  0
  56 #define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(3, 19)<<8))
  57 #define CONFIG_SF_DEFAULT_SPEED 25000000
  58 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  59 #endif
  60
  61 /* I2C Configs */
  62 #define CONFIG_CMD_I2C
  63 #define CONFIG_SYS_I2C
  64 #define CONFIG_SYS_I2C_MXC
  65 #define CONFIG_SYS_I2C_SPEED            100000
  66
  67 /* MMC Configs */
  68 #define CONFIG_FSL_ESDHC
  69 #define CONFIG_FSL_USDHC
  70 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  71 #define CONFIG_SYS_FSL_USDHC_NUM       2
  72
  73 #define CONFIG_MMC
  74 #define CONFIG_CMD_MMC
  75 #define CONFIG_GENERIC_MMC
  76 #define CONFIG_BOUNCE_BUFFER
  77 #define CONFIG_CMD_EXT2
  78 #define CONFIG_CMD_FAT
  79 #define CONFIG_DOS_PARTITION
  80
  81 #ifdef CONFIG_MX6Q
  82 #define CONFIG_CMD_SATA
  83 #endif
  84
  85 /*
  86  * SATA Configs
  87  */
  88 #ifdef CONFIG_CMD_SATA
  89 #define CONFIG_DWC_AHSATA
  90 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  91 #define CONFIG_DWC_AHSATA_PORT_ID       0
  92 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  93 #define CONFIG_LBA48
  94 #define CONFIG_LIBATA
  95 #endif
  96
  97 #define CONFIG_CMD_PING
  98 #define CONFIG_CMD_DHCP
  99 #define CONFIG_CMD_MII
 100 #define CONFIG_CMD_NET
 101 #define CONFIG_FEC_MXC
 102 #define CONFIG_MII
 103 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 104 #define CONFIG_FEC_XCV_TYPE             RGMII
 105 #define CONFIG_ETHPRIME                 "FEC"
 106 #define CONFIG_FEC_MXC_PHYADDR          6
 107 #define CONFIG_PHYLIB
 108 #define CONFIG_PHY_MICREL
 109 #define CONFIG_PHY_MICREL_KSZ9021
 110
 111 /* USB Configs */
 112 #define CONFIG_CMD_USB
 113 #define CONFIG_CMD_FAT
 114 #define CONFIG_USB_EHCI
 115 #define CONFIG_USB_EHCI_MX6
 116 #define CONFIG_USB_STORAGE
 117 #define CONFIG_USB_HOST_ETHER
 118 #define CONFIG_USB_ETHER_ASIX
 119 #define CONFIG_USB_ETHER_MCS7830
 120 #define CONFIG_USB_ETHER_SMSC95XX
 121 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 122 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 123 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 124 #define CONFIG_MXC_USB_FLAGS    0
 125
 126 /* Miscellaneous commands */
 127 #define CONFIG_CMD_BMODE
 128 #define CONFIG_CMD_SETEXPR
 129
 130 /* Framebuffer and LCD */
 131 #define CONFIG_VIDEO
 132 #define CONFIG_VIDEO_IPUV3
 133 #define CONFIG_CFB_CONSOLE
 134 #define CONFIG_VGA_AS_SINGLE_DEVICE
 135 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 136 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 137 #define CONFIG_VIDEO_BMP_RLE8
 138 #define CONFIG_SPLASH_SCREEN
 139 #define CONFIG_BMP_16BPP
 140 #define CONFIG_VIDEO_LOGO
 141 #define CONFIG_IPUV3_CLK 260000000
 142 #define CONFIG_CMD_HDMIDETECT
 143 #define CONFIG_CONSOLE_MUX
 144 #define CONFIG_IMX_HDMI
 145 #define CONFIG_IMX_VIDEO_SKIP
 146
 147 /* allow to overwrite serial and ethaddr */
 148 #define CONFIG_ENV_OVERWRITE
 149 #define CONFIG_CONS_INDEX              1
 150 #define CONFIG_BAUDRATE                        115200
 151
 152 /* Command definition */
 153 #include <config_cmd_default.h>
 154
 155 #undef CONFIG_CMD_IMLS
 156
 157 #define CONFIG_BOOTDELAY               1
 158
 159 #define CONFIG_PREBOOT                 ""
 160
 161 #define CONFIG_LOADADDR                        0x12000000
 162 #define CONFIG_SYS_TEXT_BASE           0x17800000
 163
 164 #ifdef CONFIG_CMD_SATA
 165 #define CONFIG_DRIVE_SATA "sata "
 166 #else
 167 #define CONFIG_DRIVE_SATA
 168 #endif
 169
 170 #ifdef CONFIG_CMD_MMC
 171 #define CONFIG_DRIVE_MMC "mmc "
 172 #else
 173 #define CONFIG_DRIVE_MMC
 174 #endif
 175
 176 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 177
 178 #if defined(CONFIG_SABRELITE)
 179 #define CONFIG_EXTRA_ENV_SETTINGS \
 180         "script=boot.scr\0" \
 181         "uimage=uImage\0" \
 182         "console=ttymxc1\0" \
 183         "fdt_high=0xffffffff\0" \
 184         "initrd_high=0xffffffff\0" \
 185         "fdt_file=imx6q-sabrelite.dtb\0" \
 186         "fdt_addr=0x18000000\0" \
 187         "boot_fdt=try\0" \
 188         "ip_dyn=yes\0" \
 189         "mmcdevs=0 1\0" \
 190         "mmcpart=1\0" \
 191         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 192         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 193                 "root=${mmcroot}\0" \
 194         "loadbootscript=" \
 195                 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 196         "bootscript=echo Running bootscript from mmc ...; " \
 197                 "source\0" \
 198         "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 199         "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 200         "mmcboot=echo Booting from mmc ...; " \
 201                 "run mmcargs; " \
 202                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 203                         "if run loadfdt; then " \
 204                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 205                         "else " \
 206                                 "if test ${boot_fdt} = try; then " \
 207                                         "bootm; " \
 208                                 "else " \
 209                                         "echo WARN: Cannot load the DT; " \
 210                                 "fi; " \
 211                         "fi; " \
 212                 "else " \
 213                         "bootm; " \
 214                 "fi;\0" \
 215         "netargs=setenv bootargs console=${console},${baudrate} " \
 216                 "root=/dev/nfs " \
 217         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 218                 "netboot=echo Booting from net ...; " \
 219                 "run netargs; " \
 220                 "if test ${ip_dyn} = yes; then " \
 221                         "setenv get_cmd dhcp; " \
 222                 "else " \
 223                         "setenv get_cmd tftp; " \
 224                 "fi; " \
 225                 "${get_cmd} ${uimage}; " \
 226                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 227                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 228                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 229                         "else " \
 230                                 "if test ${boot_fdt} = try; then " \
 231                                         "bootm; " \
 232                                 "else " \
 233                                         "echo WARN: Cannot load the DT; " \
 234                                 "fi; " \
 235                         "fi; " \
 236                 "else " \
 237                         "bootm; " \
 238                 "fi;\0"
 239
 240 #define CONFIG_BOOTCOMMAND \
 241         "for mmcdev in ${mmcdevs}; do " \
 242                 "mmc dev ${mmcdev}; " \
 243                 "if mmc rescan; then " \
 244                         "if run loadbootscript; then " \
 245                                 "run bootscript; " \
 246                         "else " \
 247                                 "if run loaduimage; then " \
 248                                         "run mmcboot; " \
 249                                 "fi; " \
 250                         "fi; " \
 251                 "fi; " \
 252         "done; " \
 253         "run netboot; "
 254 #else
 255 #define CONFIG_EXTRA_ENV_SETTINGS \
 256         "console=ttymxc1\0" \
 257         "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
 258                 "sf erase 0xc0000 0x2000 && " \
 259                 "echo restored environment to factory default ; fi\0" \
 260         "bootcmd=for dtype in " CONFIG_DRIVE_TYPES \
 261                 "; do " \
 262                         "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 263                                 "for fs in fat ext2 ; do " \
 264                                         "${fs}load " \
 265                                                 "${dtype} ${disk}:1 " \
 266                                                 "10008000 " \
 267                                                 "/6x_bootscript" \
 268                                                 "&& source 10008000 ; " \
 269                                 "done ; " \
 270                         "done ; " \
 271                 "done; " \
 272                 "setenv stdout serial,vga ; " \
 273                 "echo ; echo 6x_bootscript not found ; " \
 274                 "echo ; echo serial console at 115200, 8N1 ; echo ; " \
 275                 "echo details at http://boundarydevices.com/6q_bootscript ; " \
 276                 "setenv stdout serial\0" \
 277         "upgradeu=for dtype in " CONFIG_DRIVE_TYPES \
 278                 "; do " \
 279                 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 280                      "for fs in fat ext2 ; do " \
 281                                 "${fs}load ${dtype} ${disk}:1 10008000 " \
 282                                         "/6x_upgrade " \
 283                                         "&& source 10008000 ; " \
 284                         "done ; " \
 285                 "done ; " \
 286         "done\0" \
 287
 288 #endif
 289 /* Miscellaneous configurable options */
 290 #define CONFIG_SYS_LONGHELP
 291 #define CONFIG_SYS_HUSH_PARSER
 292 #define CONFIG_SYS_PROMPT              "U-Boot > "
 293 #define CONFIG_AUTO_COMPLETE
 294 #define CONFIG_SYS_CBSIZE              1024
 295
 296 /* Print Buffer Size */
 297 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 298 #define CONFIG_SYS_MAXARGS             16
 299 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 300
 301 #define CONFIG_SYS_MEMTEST_START       0x10000000
 302 #define CONFIG_SYS_MEMTEST_END         0x10010000
 303 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 304
 305 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 306
 307 #define CONFIG_CMDLINE_EDITING
 308
 309 /* Physical Memory Map */
 310 #define CONFIG_NR_DRAM_BANKS           1
 311 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 312
 313 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 314 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 315 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 316
 317 #define CONFIG_SYS_INIT_SP_OFFSET \
 318         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 319 #define CONFIG_SYS_INIT_SP_ADDR \
 320         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 321
 322 /* FLASH and environment organization */
 323 #define CONFIG_SYS_NO_FLASH
 324
 325 #define CONFIG_ENV_SIZE                 (8 * 1024)
 326
 327 #if defined(CONFIG_SABRELITE)
 328 #define CONFIG_ENV_IS_IN_MMC
 329 #else
 330 #define CONFIG_ENV_IS_IN_SPI_FLASH
 331 #endif
 332
 333 #if defined(CONFIG_ENV_IS_IN_MMC)
 334 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 335 #define CONFIG_SYS_MMC_ENV_DEV          0
 336 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 337 #define CONFIG_ENV_OFFSET               (768 * 1024)
 338 #define CONFIG_ENV_SECT_SIZE            (8 * 1024)
 339 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 340 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 341 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 342 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 343 #endif
 344
 345 #define CONFIG_OF_LIBFDT
 346 #define CONFIG_CMD_BOOTZ
 347
 348 #ifndef CONFIG_SYS_DCACHE_OFF
 349 #define CONFIG_CMD_CACHE
 350 #endif
 351
 352 #define CONFIG_CMD_BMP
 353
 354 #define CONFIG_CMD_TIME
 355 #define CONFIG_SYS_ALT_MEMTEST
 356
 357 #define CONFIG_CMD_BOOTZ
 358 #define CONFIG_SUPPORT_RAW_INITRD
 359 #define CONFIG_CMD_FS_GENERIC
 360
 361 /*
 362  * PCI express
 363  */
 364 #ifdef CONFIG_CMD_PCI
 365 #define CONFIG_PCI
 366 #define CONFIG_PCI_PNP
 367 #define CONFIG_PCI_SCAN_SHOW
 368 #define CONFIG_PCIE_IMX
 369 #endif
 370
 371 #define CONFIG_CMD_ELF
 372
 373 #define CONFIG_USB_GADGET
 374 #define CONFIG_CMD_USB_MASS_STORAGE
 375 #define CONFIG_USB_GADGET_MASS_STORAGE
 376 #define CONFIG_USBDOWNLOAD_GADGET
 377 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 378
 379 /* Netchip IDs */
 380 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
 381 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
 382 #define CONFIG_G_DNL_MANUFACTURER "Boundary"
 383
 384 #endif         /* __CONFIG_H */