include/configs/nitrogen6x.h

   1 /*
   2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Boundary Devices Nitrogen6X
   5  * and Freescale i.MX6Q Sabre Lite boards.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_MX6
  14 #define CONFIG_DISPLAY_CPUINFO
  15 #define CONFIG_DISPLAY_BOARDINFO
  16
  17 #define CONFIG_MACH_TYPE        3769
  18
  19 #include <asm/arch/imx-regs.h>
  20 #include <asm/imx-common/gpio.h>
  21
  22 #define CONFIG_CMDLINE_TAG
  23 #define CONFIG_SETUP_MEMORY_TAGS
  24 #define CONFIG_INITRD_TAG
  25 #define CONFIG_REVISION_TAG
  26
  27 /* Size of malloc() pool */
  28 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  29
  30 #define CONFIG_BOARD_EARLY_INIT_F
  31 #define CONFIG_MISC_INIT_R
  32 #define CONFIG_MXC_GPIO
  33 #define CONFIG_MV_UDC
  34 #define CONFIG_USBD_HS
  35 #define CONFIG_USB_GADGET_DUALSPEED
  36 #define CONFIG_USB_ETHER
  37 #define CONFIG_USB_ETH_CDC
  38 #define CONFIG_NETCONSOLE
  39
  40 #define CONFIG_CMD_FUSE
  41 #ifdef CONFIG_CMD_FUSE
  42 #define CONFIG_MXC_OCOTP
  43 #endif
  44
  45 #define CONFIG_MXC_UART
  46 #define CONFIG_MXC_UART_BASE           UART2_BASE
  47
  48 #define CONFIG_CMD_SF
  49 #ifdef CONFIG_CMD_SF
  50 #define CONFIG_SPI_FLASH
  51 #define CONFIG_SPI_FLASH_SST
  52 #define CONFIG_MXC_SPI
  53 #define CONFIG_SF_DEFAULT_BUS  0
  54 #define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(3, 19)<<8))
  55 #define CONFIG_SF_DEFAULT_SPEED 25000000
  56 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  57 #endif
  58
  59 /* I2C Configs */
  60 #define CONFIG_CMD_I2C
  61 #define CONFIG_SYS_I2C
  62 #define CONFIG_SYS_I2C_MXC
  63 #define CONFIG_SYS_I2C_SPEED            100000
  64
  65 /* MMC Configs */
  66 #define CONFIG_FSL_ESDHC
  67 #define CONFIG_FSL_USDHC
  68 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  69 #define CONFIG_SYS_FSL_USDHC_NUM       2
  70
  71 #define CONFIG_MMC
  72 #define CONFIG_CMD_MMC
  73 #define CONFIG_GENERIC_MMC
  74 #define CONFIG_BOUNCE_BUFFER
  75 #define CONFIG_CMD_EXT2
  76 #define CONFIG_CMD_FAT
  77 #define CONFIG_DOS_PARTITION
  78
  79 #ifdef CONFIG_MX6Q
  80 #define CONFIG_CMD_SATA
  81 #endif
  82
  83 /*
  84  * SATA Configs
  85  */
  86 #ifdef CONFIG_CMD_SATA
  87 #define CONFIG_DWC_AHSATA
  88 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  89 #define CONFIG_DWC_AHSATA_PORT_ID       0
  90 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  91 #define CONFIG_LBA48
  92 #define CONFIG_LIBATA
  93 #endif
  94
  95 #define CONFIG_CMD_PING
  96 #define CONFIG_CMD_DHCP
  97 #define CONFIG_CMD_MII
  98 #define CONFIG_CMD_NET
  99 #define CONFIG_FEC_MXC
 100 #define CONFIG_MII
 101 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 102 #define CONFIG_FEC_XCV_TYPE             RGMII
 103 #define CONFIG_ETHPRIME                 "FEC"
 104 #define CONFIG_FEC_MXC_PHYADDR          6
 105 #define CONFIG_PHYLIB
 106 #define CONFIG_PHY_MICREL
 107 #define CONFIG_PHY_MICREL_KSZ9021
 108
 109 /* USB Configs */
 110 #define CONFIG_CMD_USB
 111 #define CONFIG_CMD_FAT
 112 #define CONFIG_USB_EHCI
 113 #define CONFIG_USB_EHCI_MX6
 114 #define CONFIG_USB_STORAGE
 115 #define CONFIG_USB_HOST_ETHER
 116 #define CONFIG_USB_ETHER_ASIX
 117 #define CONFIG_USB_ETHER_SMSC95XX
 118 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 119 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 120 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 121 #define CONFIG_MXC_USB_FLAGS    0
 122
 123 /* Miscellaneous commands */
 124 #define CONFIG_CMD_BMODE
 125 #define CONFIG_CMD_SETEXPR
 126
 127 /* Framebuffer and LCD */
 128 #define CONFIG_VIDEO
 129 #define CONFIG_VIDEO_IPUV3
 130 #define CONFIG_CFB_CONSOLE
 131 #define CONFIG_VGA_AS_SINGLE_DEVICE
 132 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 133 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 134 #define CONFIG_VIDEO_BMP_RLE8
 135 #define CONFIG_SPLASH_SCREEN
 136 #define CONFIG_BMP_16BPP
 137 #define CONFIG_VIDEO_LOGO
 138 #define CONFIG_IPUV3_CLK 260000000
 139 #define CONFIG_CMD_HDMIDETECT
 140 #define CONFIG_CONSOLE_MUX
 141 #define CONFIG_IMX_HDMI
 142
 143 /* allow to overwrite serial and ethaddr */
 144 #define CONFIG_ENV_OVERWRITE
 145 #define CONFIG_CONS_INDEX              1
 146 #define CONFIG_BAUDRATE                        115200
 147
 148 /* Command definition */
 149 #include <config_cmd_default.h>
 150
 151 #undef CONFIG_CMD_IMLS
 152
 153 #define CONFIG_BOOTDELAY               1
 154
 155 #define CONFIG_PREBOOT                 ""
 156
 157 #define CONFIG_LOADADDR                        0x12000000
 158 #define CONFIG_SYS_TEXT_BASE           0x17800000
 159
 160 #ifdef CONFIG_CMD_SATA
 161 #define CONFIG_DRIVE_SATA "sata "
 162 #else
 163 #define CONFIG_DRIVE_SATA
 164 #endif
 165
 166 #ifdef CONFIG_CMD_MMC
 167 #define CONFIG_DRIVE_MMC "mmc "
 168 #else
 169 #define CONFIG_DRIVE_MMC
 170 #endif
 171
 172 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 173
 174 #if defined(CONFIG_SABRELITE)
 175 #define CONFIG_EXTRA_ENV_SETTINGS \
 176         "script=boot.scr\0" \
 177         "uimage=uImage\0" \
 178         "console=ttymxc1\0" \
 179         "fdt_high=0xffffffff\0" \
 180         "initrd_high=0xffffffff\0" \
 181         "fdt_file=imx6q-sabrelite.dtb\0" \
 182         "fdt_addr=0x11000000\0" \
 183         "boot_fdt=try\0" \
 184         "ip_dyn=yes\0" \
 185         "mmcdev=0\0" \
 186         "mmcpart=1\0" \
 187         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 188         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 189                 "root=${mmcroot}\0" \
 190         "loadbootscript=" \
 191                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 192         "bootscript=echo Running bootscript from mmc ...; " \
 193                 "source\0" \
 194         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 195         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 196         "mmcboot=echo Booting from mmc ...; " \
 197                 "run mmcargs; " \
 198                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 199                         "if run loadfdt; then " \
 200                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 201                         "else " \
 202                                 "if test ${boot_fdt} = try; then " \
 203                                         "bootm; " \
 204                                 "else " \
 205                                         "echo WARN: Cannot load the DT; " \
 206                                 "fi; " \
 207                         "fi; " \
 208                 "else " \
 209                         "bootm; " \
 210                 "fi;\0" \
 211         "netargs=setenv bootargs console=${console},${baudrate} " \
 212                 "root=/dev/nfs " \
 213         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 214                 "netboot=echo Booting from net ...; " \
 215                 "run netargs; " \
 216                 "if test ${ip_dyn} = yes; then " \
 217                         "setenv get_cmd dhcp; " \
 218                 "else " \
 219                         "setenv get_cmd tftp; " \
 220                 "fi; " \
 221                 "${get_cmd} ${uimage}; " \
 222                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 223                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 224                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 225                         "else " \
 226                                 "if test ${boot_fdt} = try; then " \
 227                                         "bootm; " \
 228                                 "else " \
 229                                         "echo WARN: Cannot load the DT; " \
 230                                 "fi; " \
 231                         "fi; " \
 232                 "else " \
 233                         "bootm; " \
 234                 "fi;\0"
 235
 236 #define CONFIG_BOOTCOMMAND \
 237            "mmc dev ${mmcdev}; if mmc rescan; then " \
 238                    "if run loadbootscript; then " \
 239                            "run bootscript; " \
 240                    "else " \
 241                            "if run loaduimage; then " \
 242                                    "run mmcboot; " \
 243                            "else run netboot; " \
 244                            "fi; " \
 245                    "fi; " \
 246            "else run netboot; fi"
 247 #else
 248 #define CONFIG_EXTRA_ENV_SETTINGS \
 249         "console=ttymxc1\0" \
 250         "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
 251                 "sf erase 0xc0000 0x2000 && " \
 252                 "echo restored environment to factory default ; fi\0" \
 253         "bootcmd=for dtype in " CONFIG_DRIVE_TYPES \
 254                 "; do " \
 255                         "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 256                                 "for fs in fat ext2 ; do " \
 257                                         "${fs}load " \
 258                                                 "${dtype} ${disk}:1 " \
 259                                                 "10008000 " \
 260                                                 "/6x_bootscript" \
 261                                                 "&& source 10008000 ; " \
 262                                 "done ; " \
 263                         "done ; " \
 264                 "done; " \
 265                 "setenv stdout serial,vga ; " \
 266                 "echo ; echo 6x_bootscript not found ; " \
 267                 "echo ; echo serial console at 115200, 8N1 ; echo ; " \
 268                 "echo details at http://boundarydevices.com/6q_bootscript ; " \
 269                 "setenv stdout serial\0" \
 270         "upgradeu=for dtype in " CONFIG_DRIVE_TYPES \
 271                 "; do " \
 272                 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 273                      "for fs in fat ext2 ; do " \
 274                                 "${fs}load ${dtype} ${disk}:1 10008000 " \
 275                                         "/6x_upgrade " \
 276                                         "&& source 10008000 ; " \
 277                         "done ; " \
 278                 "done ; " \
 279         "done\0" \
 280
 281 #endif
 282 /* Miscellaneous configurable options */
 283 #define CONFIG_SYS_LONGHELP
 284 #define CONFIG_SYS_HUSH_PARSER
 285 #define CONFIG_SYS_PROMPT              "U-Boot > "
 286 #define CONFIG_AUTO_COMPLETE
 287 #define CONFIG_SYS_CBSIZE              1024
 288
 289 /* Print Buffer Size */
 290 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 291 #define CONFIG_SYS_MAXARGS             16
 292 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 293
 294 #define CONFIG_SYS_MEMTEST_START       0x10000000
 295 #define CONFIG_SYS_MEMTEST_END         0x10010000
 296 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 297
 298 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 299
 300 #define CONFIG_CMDLINE_EDITING
 301
 302 /* Physical Memory Map */
 303 #define CONFIG_NR_DRAM_BANKS           1
 304 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 305
 306 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 307 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 308 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 309
 310 #define CONFIG_SYS_INIT_SP_OFFSET \
 311         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 312 #define CONFIG_SYS_INIT_SP_ADDR \
 313         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 314
 315 /* FLASH and environment organization */
 316 #define CONFIG_SYS_NO_FLASH
 317
 318 #define CONFIG_ENV_SIZE                 (8 * 1024)
 319
 320 #if defined(CONFIG_SABRELITE)
 321 #define CONFIG_ENV_IS_IN_MMC
 322 #else
 323 #define CONFIG_ENV_IS_IN_SPI_FLASH
 324 #endif
 325
 326 #if defined(CONFIG_ENV_IS_IN_MMC)
 327 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 328 #define CONFIG_SYS_MMC_ENV_DEV          0
 329 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 330 #define CONFIG_ENV_OFFSET               (768 * 1024)
 331 #define CONFIG_ENV_SECT_SIZE            (8 * 1024)
 332 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 333 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 334 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 335 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 336 #endif
 337
 338 #define CONFIG_OF_LIBFDT
 339 #define CONFIG_CMD_BOOTZ
 340
 341 #ifndef CONFIG_SYS_DCACHE_OFF
 342 #define CONFIG_CMD_CACHE
 343 #endif
 344
 345 #define CONFIG_CMD_BMP
 346
 347 #define CONFIG_CMD_TIME
 348 #define CONFIG_SYS_ALT_MEMTEST
 349
 350 #define CONFIG_CMD_BOOTZ
 351 #define CONFIG_SUPPORT_RAW_INITRD
 352 #define CONFIG_CMD_FS_GENERIC
 353
 354 #endif         /* __CONFIG_H */