include/configs/novena.h

   1 /*
   2  * Configuration settings for the Novena U-boot.
   3  *
   4  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 /* System configurations */
  13 #define CONFIG_BOARD_EARLY_INIT_F
  14 #define CONFIG_BOARD_LATE_INIT
  15 #define CONFIG_MISC_INIT_R
  16 #define CONFIG_DOS_PARTITION
  17 #define CONFIG_FAT_WRITE
  18 #define CONFIG_FIT
  19 #define CONFIG_KEYBOARD
  20 #define CONFIG_OF_LIBFDT
  21
  22 #include "mx6_common.h"
  23
  24 /* U-Boot Commands */
  25 #define CONFIG_CMD_ASKENV
  26 #define CONFIG_CMD_BMODE
  27 #define CONFIG_CMD_BOOTZ
  28 #define CONFIG_CMD_CACHE
  29 #define CONFIG_CMD_DHCP
  30 #define CONFIG_CMD_EEPROM
  31 #define CONFIG_CMD_EXT4
  32 #define CONFIG_CMD_EXT4_WRITE
  33 #define CONFIG_CMD_FAT
  34 #define CONFIG_CMD_FS_GENERIC
  35 #define CONFIG_CMD_I2C
  36 #define CONFIG_CMD_FUSE
  37 #define CONFIG_CMD_MII
  38 #define CONFIG_CMD_MMC
  39 #define CONFIG_CMD_NET
  40 #define CONFIG_CMD_PCI
  41 #define CONFIG_CMD_PING
  42 #define CONFIG_CMD_SATA
  43 #define CONFIG_CMD_SETEXPR
  44 #define CONFIG_CMD_TIME
  45 #define CONFIG_CMD_USB
  46 #define CONFIG_VIDEO
  47
  48 /* U-Boot general configurations */
  49 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  50
  51 /* U-Boot environment */
  52 #define CONFIG_ENV_SIZE                 (16 * 1024)
  53 /*
  54  * Environment is on MMC, starting at offset 512KiB from start of the card.
  55  * Please place first partition at offset 1MiB from the start of the card
  56  * as recommended by GNU/fdisk. See below for details:
  57  * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
  58  */
  59 #ifdef CONFIG_CMD_MMC
  60 #define CONFIG_ENV_IS_IN_MMC
  61 #define CONFIG_SYS_MMC_ENV_DEV          0
  62 #define CONFIG_ENV_OFFSET               (512 * 1024)
  63 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
  64 #define CONFIG_ENV_OFFSET_REDUND        \
  65                 (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  66 #else
  67 #define CONFIG_ENV_IS_NOWHERE
  68 #endif
  69
  70 /* Booting Linux */
  71 #define CONFIG_BOOTFILE                 "fitImage"
  72 #define CONFIG_BOOTARGS                 "console=ttymxc1,115200 "
  73 #define CONFIG_BOOTCOMMAND              "run net_nfs"
  74 #define CONFIG_HOSTNAME                 novena
  75
  76 /* Physical Memory Map */
  77 #define CONFIG_NR_DRAM_BANKS            1
  78 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  79 #define PHYS_SDRAM_SIZE                 0xF0000000
  80
  81 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  82 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  83 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  84
  85 #define CONFIG_SYS_INIT_SP_OFFSET \
  86         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  87 #define CONFIG_SYS_INIT_SP_ADDR \
  88         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  89
  90 #define CONFIG_SYS_MEMTEST_START        0x10000000
  91 #define CONFIG_SYS_MEMTEST_END          0x20000000
  92
  93 #define CONFIG_SYS_MALLOC_LEN           (64 * 1024 * 1024)
  94
  95 /* SPL */
  96 #define CONFIG_SPL_FAT_SUPPORT
  97 #define CONFIG_SPL_MMC_SUPPORT
  98 #include "imx6_spl.h"                   /* common IMX6 SPL configuration */
  99
 100 /* Ethernet Configuration */
 101 #ifdef CONFIG_CMD_NET
 102 #define CONFIG_FEC_MXC
 103 #define CONFIG_MII
 104 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 105 #define CONFIG_FEC_XCV_TYPE             RGMII
 106 #define CONFIG_ETHPRIME                 "FEC"
 107 #define CONFIG_FEC_MXC_PHYADDR          0x7
 108 #define CONFIG_PHYLIB
 109 #define CONFIG_PHY_MICREL
 110 #define CONFIG_PHY_MICREL_KSZ9021
 111 #define CONFIG_ARP_TIMEOUT              200UL
 112 #endif
 113
 114 /* I2C */
 115 #define CONFIG_SYS_I2C
 116 #define CONFIG_SYS_I2C_MXC
 117 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 118 #define CONFIG_I2C_MULTI_BUS
 119 #define CONFIG_I2C_MXC
 120 #define CONFIG_SYS_I2C_SPEED            100000
 121
 122 /* I2C EEPROM */
 123 #ifdef CONFIG_CMD_EEPROM
 124 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 125 #define CONFIG_SYS_SPD_BUS_NUM          2
 126 #endif
 127
 128 /* MMC Configs */
 129 #ifdef CONFIG_CMD_MMC
 130 #define CONFIG_MMC
 131 #define CONFIG_GENERIC_MMC
 132 #define CONFIG_BOUNCE_BUFFER
 133 #define CONFIG_FSL_ESDHC
 134 #define CONFIG_FSL_USDHC
 135 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 136 #define CONFIG_SYS_FSL_USDHC_NUM        2
 137 #endif
 138
 139 /* OCOTP Configs */
 140 #ifdef CONFIG_CMD_FUSE
 141 #define CONFIG_MXC_OCOTP
 142 #endif
 143
 144 /* PCI express */
 145 #ifdef CONFIG_CMD_PCI
 146 #define CONFIG_PCI
 147 #define CONFIG_PCI_PNP
 148 #define CONFIG_PCI_SCAN_SHOW
 149 #define CONFIG_PCIE_IMX
 150 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(3, 29)
 151 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(7, 12)
 152 #endif
 153
 154 /* PMIC */
 155 #define CONFIG_POWER
 156 #define CONFIG_POWER_I2C
 157 #define CONFIG_POWER_PFUZE100
 158 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 159
 160 /* SATA Configs */
 161 #ifdef CONFIG_CMD_SATA
 162 #define CONFIG_DWC_AHSATA
 163 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 164 #define CONFIG_DWC_AHSATA_PORT_ID       0
 165 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 166 #define CONFIG_LBA48
 167 #define CONFIG_LIBATA
 168 #endif
 169
 170 /* UART */
 171 #define CONFIG_MXC_UART
 172 #define CONFIG_MXC_UART_BASE            UART2_BASE
 173
 174 /* USB Configs */
 175 #ifdef CONFIG_CMD_USB
 176 #define CONFIG_USB_EHCI
 177 #define CONFIG_USB_EHCI_MX6
 178 #define CONFIG_USB_STORAGE
 179 #define CONFIG_USB_KEYBOARD
 180 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 181 #define CONFIG_USB_HOST_ETHER
 182 #define CONFIG_USB_ETHER_ASIX
 183 #define CONFIG_USB_ETHER_SMSC95XX
 184 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 185 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 186 #define CONFIG_MXC_USB_FLAGS            0
 187 /* Gadget part */
 188 #define CONFIG_CI_UDC
 189 #define CONFIG_USBD_HS
 190 #define CONFIG_USB_GADGET_DUALSPEED
 191 #define CONFIG_USB_ETHER
 192 #define CONFIG_USB_ETH_CDC
 193 #define CONFIG_NETCONSOLE
 194 #endif
 195
 196 /* Video output */
 197 #ifdef CONFIG_VIDEO
 198 #define CONFIG_VIDEO_IPUV3
 199 #define CONFIG_CFB_CONSOLE
 200 #define CONFIG_VGA_AS_SINGLE_DEVICE
 201 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 202 #define CONFIG_VIDEO_BMP_RLE8
 203 #define CONFIG_SPLASH_SCREEN
 204 #define CONFIG_BMP_16BPP
 205 #define CONFIG_VIDEO_LOGO
 206 #define CONFIG_IPUV3_CLK                260000000
 207 #define CONFIG_CMD_HDMIDETECT
 208 #define CONFIG_CONSOLE_MUX
 209 #define CONFIG_IMX_HDMI
 210 #define CONFIG_IMX_VIDEO_SKIP
 211 #endif
 212
 213 /* Extra U-Boot environment. */
 214 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 215         "fdt_high=0xffffffff\0"                                         \
 216         "initrd_high=0xffffffff\0"                                      \
 217         "consdev=ttymxc1\0"                                             \
 218         "baudrate=115200\0"                                             \
 219         "bootdev=/dev/mmcblk0p1\0"                                      \
 220         "rootdev=/dev/mmcblk0p2\0"                                      \
 221         "netdev=eth0\0"                                                 \
 222         "kernel_addr_r=0x18000000\0"                                    \
 223         "addcons="                                                      \
 224                 "setenv bootargs ${bootargs} "                          \
 225                 "console=${consdev},${baudrate}\0"                      \
 226         "addip="                                                        \
 227                 "setenv bootargs ${bootargs} "                          \
 228                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 229                         "${netmask}:${hostname}:${netdev}:off\0"        \
 230         "addmisc="                                                      \
 231                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 232         "addargs=run addcons addmisc\0"                                 \
 233         "mmcload="                                                      \
 234                 "mmc rescan ; "                                         \
 235                 "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"       \
 236         "netload="                                                      \
 237                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 238         "miscargs=nohlt panic=1\0"                                      \
 239         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 240         "nfsargs="                                                      \
 241                 "setenv bootargs root=/dev/nfs rw "                     \
 242                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 243         "mmc_mmc="                                                      \
 244                 "run mmcload mmcargs addargs ; "                        \
 245                 "bootm ${kernel_addr_r}\0"                              \
 246         "mmc_nfs="                                                      \
 247                 "run mmcload nfsargs addip addargs ; "                  \
 248                 "bootm ${kernel_addr_r}\0"                              \
 249         "net_mmc="                                                      \
 250                 "run netload mmcargs addargs ; "                        \
 251                 "bootm ${kernel_addr_r}\0"                              \
 252         "net_nfs="                                                      \
 253                 "run netload nfsargs addip addargs ; "                  \
 254                 "bootm ${kernel_addr_r}\0"                              \
 255         "update_sd_spl_filename=SPL\0"                                  \
 256         "update_sd_uboot_filename=u-boot.img\0"                         \
 257         "update_sd_firmware="   /* Update the SD firmware partition */  \
 258                 "if mmc rescan ; then "                                 \
 259                 "if dhcp ${update_sd_spl_filename} ; then "             \
 260                 "mmc write ${loadaddr} 2 0x200 ; "                      \
 261                 "fi ; "                                                 \
 262                 "if dhcp ${update_sd_uboot_filename} ; then "           \
 263                 "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
 264                 "fi ; "                                                 \
 265                 "fi\0"                                                  \
 266
 267 #endif                          /* __CONFIG_H */