2 * Configuration settings for the Gumstix Overo board.
4 * SPDX-License-Identifier: GPL-2.0+
11 * High Level Configuration Options
13 #define CONFIG_OMAP /* in a TI OMAP core */
14 #define CONFIG_OMAP34XX /* which is a 34XX */
15 #define CONFIG_OMAP3_OVERO /* working with overo */
16 #define CONFIG_OMAP_GPIO
17 #define CONFIG_OMAP_COMMON
19 #define CONFIG_SDRC /* The chip has SDRC controller */
21 #include <asm/arch/cpu.h> /* get chip and board defs */
22 #include <asm/arch/omap3.h>
25 * Display CPU and Board information
27 #define CONFIG_DISPLAY_CPUINFO
28 #define CONFIG_DISPLAY_BOARDINFO
31 #define V_OSCK 26000000 /* Clock output from T2 */
32 #define V_SCLK (V_OSCK >> 1)
34 #define CONFIG_MISC_INIT_R
36 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
37 #define CONFIG_SETUP_MEMORY_TAGS
38 #define CONFIG_INITRD_TAG
39 #define CONFIG_REVISION_TAG
41 #define CONFIG_OF_LIBFDT
44 * Size of malloc() pool
46 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
48 /* Shift 128 << 15 provides 4 MiB heap to support UBI commands.
49 * Shift 128 << 10 provides 128 KiB heap for limited-memory devices. */
50 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 15))
57 * NS16550 Configuration
59 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
61 #define CONFIG_SYS_NS16550
62 #define CONFIG_SYS_NS16550_SERIAL
63 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
64 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
67 * select serial console configuration
69 #define CONFIG_CONS_INDEX 3
70 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
71 #define CONFIG_SERIAL3 3
73 /* allow to overwrite serial and ethaddr */
74 #define CONFIG_ENV_OVERWRITE
75 #define CONFIG_BAUDRATE 115200
76 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \
78 #define CONFIG_GENERIC_MMC
80 #define CONFIG_OMAP_HSMMC
81 #define CONFIG_DOS_PARTITION
83 /* commands to include */
84 #include <config_cmd_default.h>
86 #define CONFIG_CMD_CACHE
87 #define CONFIG_CMD_EXT2 /* EXT2 Support */
88 #define CONFIG_CMD_FAT /* FAT support */
89 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */
91 #define CONFIG_CMD_I2C /* I2C serial bus support */
92 #define CONFIG_CMD_MMC /* MMC support */
93 #define CONFIG_CMD_NAND /* NAND support */
95 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
96 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */
97 #undef CONFIG_CMD_IMI /* iminfo */
98 #undef CONFIG_CMD_IMLS /* List all found images */
99 #undef CONFIG_CMD_NFS /* NFS support */
100 #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
102 #ifdef CONFIG_CMD_NAND
104 #define CONFIG_CMD_MTDPARTS /* MTD partition support */
105 #define CONFIG_CMD_UBI /* UBI-formated MTD partition support */
106 #define CONFIG_CMD_UBIFS /* Read-only UBI volume operations */
108 #define CONFIG_RBTREE /* required by CONFIG_CMD_UBI */
109 #define CONFIG_LZO /* required by CONFIG_CMD_UBIFS */
111 #define CONFIG_MTD_DEVICE /* required by CONFIG_CMD_MTDPARTS */
112 #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */
114 /* NAND block size is 128 KiB. Synchronize these values with
115 * overo_nand_partitions in mach-omap2/board-overo.c in Linux:
116 * xloader 4 * NAND_BLOCK_SIZE = 512 KiB
117 * uboot 14 * NAND_BLOCK_SIZE = 1792 KiB
118 * uboot environtment 2 * NAND_BLOCK_SIZE = 256 KiB
119 * linux 64 * NAND_BLOCK_SIZE = 8 MiB
122 #define MTDIDS_DEFAULT "nand0=omap2-nand.0"
123 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \
129 #else /* CONFIG_CMD_NAND */
130 #define MTDPARTS_DEFAULT
131 #endif /* CONFIG_CMD_NAND */
133 #define CONFIG_SYS_NO_FLASH
134 #define CONFIG_SYS_I2C
135 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000
136 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1
137 #define CONFIG_SYS_I2C_OMAP34XX
142 #define CONFIG_TWL4030_POWER
143 #define CONFIG_TWL4030_LED
148 #define CONFIG_SYS_NAND_QUIET_TEST
149 #define CONFIG_NAND_OMAP_GPMC
150 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
152 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
155 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
157 /* Environment information */
158 #define CONFIG_BOOTDELAY 5
160 #define CONFIG_EXTRA_ENV_SETTINGS \
161 "loadaddr=0x82000000\0" \
162 "console=ttyO2,115200n8\0" \
166 "dvimode=1024x768MR-16@60\0" \
167 "defaultdisplay=dvi\0" \
169 "mmcroot=/dev/mmcblk0p2 rw\0" \
170 "mmcrootfstype=ext3 rootwait\0" \
171 "nandroot=ubi0:rootfs ubi.mtd=4\0" \
172 "nandrootfstype=ubifs\0" \
173 "mtdparts=" MTDPARTS_DEFAULT "\0" \
174 "mmcargs=setenv bootargs console=${console} " \
176 "mpurate=${mpurate} " \
178 "omapfb.mode=dvi:${dvimode} " \
179 "omapdss.def_disp=${defaultdisplay} " \
181 "rootfstype=${mmcrootfstype}\0" \
182 "nandargs=setenv bootargs console=${console} " \
184 "mpurate=${mpurate} " \
186 "omapfb.mode=dvi:${dvimode} " \
187 "omapdss.def_disp=${defaultdisplay} " \
188 "root=${nandroot} " \
189 "rootfstype=${nandrootfstype}\0" \
190 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
191 "bootscript=echo Running bootscript from mmc ...; " \
192 "source ${loadaddr}\0" \
193 "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
194 "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
195 "env import -t ${loadaddr} ${filesize}\0" \
196 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
197 "mmcboot=echo Booting from mmc ...; " \
199 "bootm ${loadaddr}\0" \
200 "nandboot=echo Booting from nand ...; " \
202 "nand read ${loadaddr} linux; " \
203 "bootm ${loadaddr}\0" \
205 #define CONFIG_BOOTCOMMAND \
206 "mmc dev ${mmcdev}; if mmc rescan; then " \
207 "if run loadbootscript; then " \
210 "if run loadbootenv; then " \
211 "run importbootenv; " \
212 "if test -n ${uenvcmd}; then " \
213 "echo Running uenvcmd ...;" \
217 "if run loaduimage; then " \
219 "else run nandboot; " \
222 "else run nandboot; fi"
224 #define CONFIG_AUTO_COMPLETE 1
226 * Miscellaneous configurable options
228 #define CONFIG_SYS_LONGHELP /* undef to save memory */
229 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
230 #define CONFIG_SYS_PROMPT "Overo # "
231 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
232 /* Print Buffer Size */
233 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
234 sizeof(CONFIG_SYS_PROMPT) + 16)
235 #define CONFIG_SYS_MAXARGS 16 /* max number of command */
237 /* Boot Argument Buffer Size */
238 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
239 /* memtest works on */
240 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
241 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
242 0x01F00000) /* 31MB */
244 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
247 * OMAP3 has 12 GP timers, they can be driven by the system clock
248 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
249 * This rate is divided by a local divisor.
251 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
252 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
254 /*-----------------------------------------------------------------------
255 * Physical Memory Map
257 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
258 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
259 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
261 /*-----------------------------------------------------------------------
262 * FLASH and environment organization
265 /* **** PISMO SUPPORT *** */
267 /* Configure the PISMO */
268 #define PISMO1_NAND_SIZE GPMC_SIZE_128M
269 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M
271 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
273 #if defined(CONFIG_CMD_NAND)
274 #define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
277 /* Monitor at start of flash */
278 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
279 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
281 #define CONFIG_ENV_IS_IN_NAND
282 #define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */
283 #define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */
285 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
286 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
287 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
289 #if defined(CONFIG_CMD_NET)
290 /*----------------------------------------------------------------------------
291 * SMSC9211 Ethernet from SMSC9118 family
292 *----------------------------------------------------------------------------
295 #define CONFIG_SMC911X
296 #define CONFIG_SMC911X_32_BIT
297 #define CONFIG_SMC911X_BASE 0x2C000000
299 #endif /* (CONFIG_CMD_NET) */
302 * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader
303 * and older u-boot.bin with the new U-Boot SPL.
305 #define CONFIG_SYS_TEXT_BASE 0x80008000
306 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
307 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
308 #define CONFIG_SYS_INIT_RAM_SIZE 0x800
309 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
310 CONFIG_SYS_INIT_RAM_SIZE - \
311 GENERATED_GBL_DATA_SIZE)
313 #define CONFIG_SYS_CACHELINE_SIZE 64
315 /* Defines for SPL */
317 #define CONFIG_SPL_FRAMEWORK
318 #define CONFIG_SPL_NAND_SIMPLE
319 #define CONFIG_SPL_TEXT_BASE 0x40200800
320 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
321 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
323 /* move malloc and bss high to prevent clashing with the main image */
324 #define CONFIG_SYS_SPL_MALLOC_START 0x87000000
325 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
326 #define CONFIG_SPL_BSS_START_ADDR 0x87080000 /* end of minimum RAM */
327 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
329 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
330 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
331 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
332 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
334 #define CONFIG_SPL_BOARD_INIT
335 #define CONFIG_SPL_LIBCOMMON_SUPPORT
336 #define CONFIG_SPL_LIBDISK_SUPPORT
337 #define CONFIG_SPL_I2C_SUPPORT
338 #define CONFIG_SPL_LIBGENERIC_SUPPORT
339 #define CONFIG_SPL_MMC_SUPPORT
340 #define CONFIG_SPL_FAT_SUPPORT
341 #define CONFIG_SPL_SERIAL_SUPPORT
342 #define CONFIG_SPL_NAND_SUPPORT
343 #define CONFIG_SPL_NAND_BASE
344 #define CONFIG_SPL_NAND_DRIVERS
345 #define CONFIG_SPL_NAND_ECC
346 #define CONFIG_SPL_GPIO_SUPPORT
347 #define CONFIG_SPL_POWER_SUPPORT
348 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
350 /* NAND boot config */
351 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
352 #define CONFIG_SYS_NAND_PAGE_COUNT 64
353 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
354 #define CONFIG_SYS_NAND_OOBSIZE 64
355 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
356 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
357 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
359 #define CONFIG_SYS_NAND_ECCSIZE 512
360 #define CONFIG_SYS_NAND_ECCBYTES 3
361 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
362 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
363 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
365 #endif /* __CONFIG_H */