]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/omap730.h
tricorder: panic() on unknown board
[karo-tx-uboot.git] / include / configs / omap730.h
1 /*
2  *
3  * BRIEF MODULE DESCRIPTION
4  *   OMAP730 hardware map
5  *
6  * Copyright (C) 2004 MPC-Data Limited. (http://www.mpc-data.co.uk)
7  * Author: MPC-Data Limited
8  *         Dave Peverley
9  *
10  * SPDX-License-Identifier:     GPL-2.0+
11  */
12
13 #ifndef __INCLUDED_OMAP730_H
14 #define __INCLUDED_OMAP730_H
15
16 #include <asm/sizes.h>
17
18 /***************************************************************************
19  * OMAP730 Configuration Registers
20  **************************************************************************/
21
22 #define PERSEUS2_MPU_DEV_ID               ((unsigned int)(0xFFFE1000))
23 #define PERSEUS2_GSM_DEV_ID0              ((unsigned int)(0xFFFE1000))
24 #define PERSEUS2_GDM_DEV_ID1              ((unsigned int)(0xFFFE1002))
25 #define DSP_CONF                          ((unsigned int)(0xFFFE1004))
26 #define PERSEUS2_MPU_DIE_ID0              ((unsigned int)(0xFFFE1008))
27 #define GSM_ASIC_CONF                     ((unsigned int)(0xFFFE1008))
28 #define PERSEUS2_MPU_DIE_ID1              ((unsigned int)(0xFFFE100C))
29 #define PERSEUS2_MODE1                    ((unsigned int)(0xFFFE1010))
30 #define PERSEUS2_GSM_DIE_ID0              ((unsigned int)(0xFFFE1010))
31 #define PERSEUS2_GSM_DIE_ID1              ((unsigned int)(0xFFFE1012))
32 #define PERSEUS2_MODE2                    ((unsigned int)(0xFFFE1014))
33 #define PERSEUS2_GSM_DIE_ID2              ((unsigned int)(0xFFFE1014))
34 #define PERSEUS2_GSM_DIE_ID3              ((unsigned int)(0xFFFE1016))
35 #define PERSEUS2_ANALOG_CELLS_CONF        ((unsigned int)(0xFFFE1018))
36 #define SPECCTL                           ((unsigned int)(0xFFFE101C))
37 #define SPARE1                            ((unsigned int)(0xFFFE1020))
38 #define SPARE2                            ((unsigned int)(0xFFFE1024))
39 #define GSM_PBG_IRQ                       ((unsigned int)(0xFFFE1028))
40 #define DMA_REQ_CONF                      ((unsigned int)(0xFFFE1030))
41 #define PE_CONF_NO_DUAL                   ((unsigned int)(0xFFFE1060))
42 #define PERSEUS2_IO_CONF0                 ((unsigned int)(0xFFFE1070))
43 #define PERSEUS2_IO_CONF1                 ((unsigned int)(0xFFFE1074))
44 #define PERSEUS2_IO_CONF2                 ((unsigned int)(0xFFFE1078))
45 #define PERSEUS2_IO_CONF3                 ((unsigned int)(0xFFFE107C))
46 #define PERSEUS2_IO_CONF4                 ((unsigned int)(0xFFFE1080))
47 #define PERSEUS2_IO_CONF5                 ((unsigned int)(0xFFFE1084))
48 #define PERSEUS2_IO_CONF6                 ((unsigned int)(0xFFFE1088))
49 #define PERSEUS2_IO_CONF7                 ((unsigned int)(0xFFFE108C))
50 #define PERSEUS2_IO_CONF8                 ((unsigned int)(0xFFFE1090))
51 #define PERSEUS2_IO_CONF9                 ((unsigned int)(0xFFFE1094))
52 #define PERSEUS2_IO_CONF10                ((unsigned int)(0xFFFE1098))
53 #define PERSEUS2_IO_CONF11                ((unsigned int)(0xFFFE109C))
54 #define PERSEUS2_IO_CONF12                ((unsigned int)(0xFFFE10A0))
55 #define PERSEUS2_IO_CONF13                ((unsigned int)(0xFFFE10A4))
56 #define PERSEUS_PCC_CONF_REG              ((unsigned int)(0xFFFE10B4))
57 #define BIST_STATUS_INTERNAL              ((unsigned int)(0xFFFE10B8))
58 #define BIST_CONTROL                      ((unsigned int)(0xFFFE10C0))
59 #define BOOT_ROM_REG                      ((unsigned int)(0xFFFE10C4))
60 #define PRODUCTION_ID_REG                 ((unsigned int)(0xFFFE10C8))
61 #define BIST_SECROM_SIGNATURE1_INTERNAL   ((unsigned int)(0xFFFE10D0))
62 #define BIST_SECROM_SIGNATURE2_INTERNAL   ((unsigned int)(0xFFFE10D4))
63 #define BIST_CONTROL_2                    ((unsigned int)(0xFFFE10D8))
64 #define DEBUG1                            ((unsigned int)(0xFFFE10E0))
65 #define DEBUG2                            ((unsigned int)(0xFFFE10E4))
66 #define DEBUG_DMA_IRQ                     ((unsigned int)(0xFFFE10E8))
67
68 /***************************************************************************
69  * OMAP730 EMIFS Registers                                       (TRM 2.5.7)
70  **************************************************************************/
71
72 #define TCMIF_BASE                 0xFFFECC00
73
74 #define EMIFS_LRUREG               (TCMIF_BASE + 0x04)
75 #define EMIFS_CONFIG               (TCMIF_BASE + 0x0C)
76 #define FLASH_CFG_0                (TCMIF_BASE + 0x10)
77 #define FLASH_CFG_1                (TCMIF_BASE + 0x14)
78 #define FLASH_CFG_2                (TCMIF_BASE + 0x18)
79 #define FLASH_CFG_3                (TCMIF_BASE + 0x1C)
80 #define FL_CFG_DYN_WAIT            (TCMIF_BASE + 0x40)
81 #define EMIFS_TIMEOUT1_REG         (TCMIF_BASE + 0x28)
82 #define EMIFS_TIMEOUT2_REG         (TCMIF_BASE + 0x2C)
83 #define EMIFS_TIMEOUT3_REG         (TCMIF_BASE + 0x30)
84 #define EMIFS_ABORT_ADDR           (TCMIF_BASE + 0x44)
85 #define EMIFS_ABORT_TYPE           (TCMIF_BASE + 0x48)
86 #define EMIFS_ABORT_TOUT           (TCMIF_BASE + 0x4C)
87 #define FLASH_ACFG_0_1             (TCMIF_BASE + 0x50)
88 #define FLASH_ACFG_1_1             (TCMIF_BASE + 0x54)
89 #define FLASH_ACFG_2_1             (TCMIF_BASE + 0x58)
90 #define FLASH_ACFG_3_1             (TCMIF_BASE + 0x5C)
91
92 /***************************************************************************
93  * OMAP730 Interrupt handlers
94  **************************************************************************/
95
96 #define OMAP_IH1_BASE           0xFFFECB00     /* MPU Level 1 IRQ handler */
97 #define OMAP_IH2_BASE           0xfffe0000
98
99 /***************************************************************************
100  * OMAP730 Timers
101  *
102  * There are three general purpose OS timers in the 730 that can be
103  * configured in autoreload or one-shot modes.
104  **************************************************************************/
105
106 #define OMAP730_32kHz_TIMER_BASE  0xFFFB9000
107
108 /* 32k Timer Registers */
109 #define TIMER32k_CR               0x08
110 #define TIMER32k_TVR              0x00
111 #define TIMER32k_TCR              0x04
112
113 /* 32k Timer Control Register definition */
114 #define TIMER32k_TSS              (1<<0)
115 #define TIMER32k_TRB              (1<<1)
116 #define TIMER32k_INT              (1<<2)
117 #define TIMER32k_ARL              (1<<3)
118
119 /* MPU Timer base addresses  */
120 #define OMAP730_MPUTIMER_BASE   0xfffec500
121 #define OMAP730_MPUTIMER_OFF    0x00000100
122
123 #define OMAP730_TIMER1_BASE     0xFFFEC500
124 #define OMAP730_TIMER2_BASE     0xFFFEC600
125 #define OMAP730_TIMER3_BASE     0xFFFEC700
126
127 /* MPU Timer Register offsets */
128 #define CNTL_TIMER                 0x00   /* MPU_CNTL_TIMER */
129 #define LOAD_TIM                   0x04   /* MPU_LOAD_TIMER */
130 #define READ_TIM                   0x08   /* MPU_READ_TIMER */
131
132 /* MPU_CNTL_TIMER register bits */
133 #define MPUTIM_FREE               (1<<6)
134 #define MPUTIM_CLOCK_ENABLE       (1<<5)
135 #define MPUTIM_PTV_MASK           (0x7<<MPUTIM_PTV_BIT)
136 #define MPUTIM_PTV_BIT            2
137 #define MPUTIM_AR                 (1<<1)
138 #define MPUTIM_ST                 (1<<0)
139
140 /***************************************************************************
141  * OMAP730 GPIO
142  *
143  * The GPIO control is split over 6 register bases in the OMAP730 to allow
144  * access to all the (6 x 32) GPIO pins!
145  **************************************************************************/
146
147 #define OMAP730_GPIO_BASE_1        0xFFFBC000
148 #define OMAP730_GPIO_BASE_2        0xFFFBC800
149 #define OMAP730_GPIO_BASE_3        0xFFFBD000
150 #define OMAP730_GPIO_BASE_4        0xFFFBD800
151 #define OMAP730_GPIO_BASE_5        0xFFFBE000
152 #define OMAP730_GPIO_BASE_6        0xFFFBE800
153
154 #define GPIO_DATA_INPUT            0x00
155 #define GPIO_DATA_OUTPUT           0x04
156 #define GPIO_DIRECTION_CONTROL     0x08
157 #define GPIO_INTERRUPT_CONTROL     0x0C
158 #define GPIO_INTERRUPT_MASK        0x10
159 #define GPIO_INTERRUPT_STATUS      0x14
160
161 #define GPIO_DATA_INPUT_1            ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DATA_INPUT))
162 #define GPIO_DATA_OUTPUT_1           ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DATA_OUTPUT))
163 #define GPIO_DIRECTION_CONTROL_1     ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DIRECTION_CONTROL))
164 #define GPIO_INTERRUPT_CONTROL_1     ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_CONTROL))
165 #define GPIO_INTERRUPT_MASK_1        ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_MASK))
166 #define GPIO_INTERRUPT_STATUS_1      ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_STATUS))
167
168 #define GPIO_DATA_INPUT_2            ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DATA_INPUT))
169 #define GPIO_DATA_OUTPUT_2           ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DATA_OUTPUT))
170 #define GPIO_DIRECTION_CONTROL_2     ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DIRECTION_CONTROL))
171 #define GPIO_INTERRUPT_CONTROL_2     ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_CONTROL))
172 #define GPIO_INTERRUPT_MASK_2        ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_MASK))
173 #define GPIO_INTERRUPT_STATUS_2      ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_STATUS))
174
175 #define GPIO_DATA_INPUT_3            ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DATA_INPUT))
176 #define GPIO_DATA_OUTPUT_3           ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DATA_OUTPUT))
177 #define GPIO_DIRECTION_CONTROL_3     ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DIRECTION_CONTROL))
178 #define GPIO_INTERRUPT_CONTROL_3     ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_CONTROL))
179 #define GPIO_INTERRUPT_MASK_3        ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_MASK))
180 #define GPIO_INTERRUPT_STATUS_3      ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_STATUS))
181
182 #define GPIO_DATA_INPUT_4            ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DATA_INPUT))
183 #define GPIO_DATA_OUTPUT_4           ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DATA_OUTPUT))
184 #define GPIO_DIRECTION_CONTROL_4     ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DIRECTION_CONTROL))
185 #define GPIO_INTERRUPT_CONTROL_4     ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_CONTROL))
186 #define GPIO_INTERRUPT_MASK_4        ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_MASK))
187 #define GPIO_INTERRUPT_STATUS_4      ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_STATUS))
188
189 #define GPIO_DATA_INPUT_5            ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DATA_INPUT))
190 #define GPIO_DATA_OUTPUT_5           ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DATA_OUTPUT))
191 #define GPIO_DIRECTION_CONTROL_5     ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DIRECTION_CONTROL))
192 #define GPIO_INTERRUPT_CONTROL_5     ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_CONTROL))
193 #define GPIO_INTERRUPT_MASK_5        ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_MASK))
194 #define GPIO_INTERRUPT_STATUS_5      ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_STATUS))
195
196 #define GPIO_DATA_INPUT_6            ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DATA_INPUT))
197 #define GPIO_DATA_OUTPUT_6           ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DATA_OUTPUT))
198 #define GPIO_DIRECTION_CONTROL_6     ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DIRECTION_CONTROL))
199 #define GPIO_INTERRUPT_CONTROL_6     ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_CONTROL))
200 #define GPIO_INTERRUPT_MASK_6        ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_MASK))
201 #define GPIO_INTERRUPT_STATUS_6      ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_STATUS))
202
203 /***************************************************************************
204  * OMAP730 Watchdog timers
205  **************************************************************************/
206
207 #define WDTIM_BASE                 0xFFFEC800
208 #define WDTIM_CONTROL              (WDTIM_BASE + 0x00)    /* MPU_CNTL_TIMER */
209 #define WDTIM_LOAD                 (WDTIM_BASE + 0x04)    /* MPU_LOAD_TIMER */
210 #define WDTIM_READ                 (WDTIM_BASE + 0x04)    /* MPU_READ_TIMER */
211 #define WDTIM_MODE                 (WDTIM_BASE + 0x08)    /* MPU_TIMER_MODE */
212
213 /***************************************************************************
214  * OMAP730 Interrupt Registers
215  **************************************************************************/
216
217 /* Interrupt Register offsets */
218
219 #define IRQ_ITR                               0x00
220 #define IRQ_MIR                               0x04
221 #define IRQ_SIR_IRQ                           0x10
222 #define IRQ_SIR_FIQ                           0x14
223 #define IRQ_CONTROL_REG                       0x18
224 #define IRQ_ILR0                              0x1C  /* ILRx == ILR0 + (0x4 * x) */
225 #define IRQ_SIR                               0x9C  /* a.k.a.IRQ_ISR */
226 #define IRQ_GMIR                              0xA0
227
228 #define REG_IHL1_MIR  (OMAP_IH1_BASE + IRQ_MIR)
229 #define REG_IHL2_MIR  (OMAP_IH2_BASE + IRQ_MIR)
230
231 /***************************************************************************
232  * OMAP730 Intersystem Communication Register                      (TRM 4.5)
233  **************************************************************************/
234
235 #define ICR_BASE                   0xFFFBB800
236
237 #define M_ICR                      (ICR_BASE + 0x00)
238 #define G_ICR                      (ICR_BASE + 0x02)
239 #define M_CTL                      (ICR_BASE + 0x04)
240 #define G_CTL                      (ICR_BASE + 0x06)
241 #define PM_BA                      (ICR_BASE + 0x0A)
242 #define DM_BA                      (ICR_BASE + 0x0C)
243 #define RM_BA                      (ICR_BASE + 0x0E)
244 #define SSPI_TAS                   (ICR_BASE + 0x12)
245
246 #endif /* ! __INCLUDED_OMAP730_H */