]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/rsk7264.h
at91sam9260ek: move board id setup to config header
[karo-tx-uboot.git] / include / configs / rsk7264.h
1 /*
2  * Configuation settings for the Renesas RSK2+SH7264 board
3  *
4  * Copyright (C) 2011 Renesas Electronics Europe Ltd.
5  * Copyright (C) 2008 Nobuhiro Iwamatsu
6  * Copyright (C) 2008 Renesas Solutions Corp.
7  *
8  * This file is released under the terms of GPL v2 and any later version.
9  * See the file COPYING in the root directory of the source tree for details.
10  */
11
12 #ifndef __RSK7264_H
13 #define __RSK7264_H
14
15 #undef DEBUG
16 #define CONFIG_SH               1
17 #define CONFIG_SH2              1
18 #define CONFIG_SH2A             1
19 #define CONFIG_CPU_SH7264       1
20 #define CONFIG_RSK7264          1
21
22 #ifndef _CONFIG_CMD_DEFAULT_H
23 # include <config_cmd_default.h>
24 #endif
25
26 #define CONFIG_BAUDRATE         115200
27 #define CONFIG_BOOTARGS         "console=ttySC3,115200"
28 #define CONFIG_BOOTDELAY        3
29 #define CONFIG_SYS_BAUDRATE_TABLE       { CONFIG_BAUDRATE }
30
31 #define CONFIG_SYS_LONGHELP     1       /* undef to save memory */
32 #define CONFIG_SYS_PROMPT       "=> "   /* Monitor Command Prompt */
33 #define CONFIG_SYS_CBSIZE       256     /* Buffer size for input from the Console */
34 #define CONFIG_SYS_PBSIZE       256     /* Buffer size for Console output */
35 #define CONFIG_SYS_MAXARGS      16      /* max args accepted for monitor commands */
36
37 /* Serial */
38 #define CONFIG_SCIF_CONSOLE     1
39 #define CONFIG_CONS_SCIF3       1
40
41 /* Memory */
42 /* u-boot relocated to top 256KB of ram */
43 #define CONFIG_SYS_TEXT_BASE            0x0CFC0000
44 #define CONFIG_SYS_SDRAM_BASE           0x0C000000
45 #define CONFIG_SYS_SDRAM_SIZE           (64 * 1024 * 1024)
46
47 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
48 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_TEXT_BASE - 0x100000)
49 #define CONFIG_SYS_MALLOC_LEN           (256 * 1024)
50 #define CONFIG_SYS_MONITOR_LEN          (128 * 1024)
51 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 4*1024*1024)
52
53 /* Flash */
54 #define CONFIG_FLASH_CFI_DRIVER
55 #define CONFIG_SYS_FLASH_CFI
56 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
57 #define CONFIG_SYS_FLASH_BASE           0x20000000 /* Non-cached */
58 #define CONFIG_SYS_MAX_FLASH_BANKS      1
59 #define CONFIG_SYS_MAX_FLASH_SECT       512
60
61 #define CONFIG_ENV_IS_IN_FLASH  1
62 #define CONFIG_ENV_OFFSET       (128 * 1024)
63 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
64 #define CONFIG_ENV_SECT_SIZE    (128 * 1024)
65 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
66
67 /* Board Clock */
68 #define CONFIG_SYS_CLK_FREQ     36000000
69 #define CMT_CLK_DIVIDER         32      /* 8 (default), 32, 128 or 512 */
70 #define CONFIG_SYS_HZ           (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
71
72 /* Network interface */
73 #define CONFIG_SMC911X
74 #define CONFIG_SMC911X_16_BIT
75 #define CONFIG_SMC911X_BASE     0x28000000
76
77 #endif  /* __RSK7264_H */