include/configs/vexpress_common.h

   1 /*
   2  * (C) Copyright 2011 ARM Limited
   3  * (C) Copyright 2010 Linaro
   4  * Matt Waddel, <matt.waddel@linaro.org>
   5  *
   6  * Configuration for Versatile Express. Parts were derived from other ARM
   7  *   configurations.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __VEXPRESS_COMMON_H
  13 #define __VEXPRESS_COMMON_H
  14
  15 /*
  16  * Definitions copied from linux kernel:
  17  * arch/arm/mach-vexpress/include/mach/motherboard.h
  18  */
  19 #ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
  20 /* CS register bases for the original memory map. */
  21 #define V2M_PA_CS0              0x40000000
  22 #define V2M_PA_CS1              0x44000000
  23 #define V2M_PA_CS2              0x48000000
  24 #define V2M_PA_CS3              0x4c000000
  25 #define V2M_PA_CS7              0x10000000
  26
  27 #define V2M_PERIPH_OFFSET(x)    (x << 12)
  28 #define V2M_SYSREGS             (V2M_PA_CS7 + V2M_PERIPH_OFFSET(0))
  29 #define V2M_SYSCTL              (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
  30 #define V2M_SERIAL_BUS_PCI      (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
  31
  32 #define V2M_BASE                0x60000000
  33 #define CONFIG_SYS_TEXT_BASE    0x60800000
  34 #elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
  35 /* CS register bases for the extended memory map. */
  36 #define V2M_PA_CS0              0x08000000
  37 #define V2M_PA_CS1              0x0c000000
  38 #define V2M_PA_CS2              0x14000000
  39 #define V2M_PA_CS3              0x18000000
  40 #define V2M_PA_CS7              0x1c000000
  41
  42 #define V2M_PERIPH_OFFSET(x)    (x << 16)
  43 #define V2M_SYSREGS             (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
  44 #define V2M_SYSCTL              (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
  45 #define V2M_SERIAL_BUS_PCI      (V2M_PA_CS7 + V2M_PERIPH_OFFSET(3))
  46
  47 #define V2M_BASE                0x80000000
  48 #define CONFIG_SYS_TEXT_BASE    0x80800000
  49 #endif
  50
  51 /*
  52  * Physical addresses, offset from V2M_PA_CS0-3
  53  */
  54 #define V2M_NOR0                (V2M_PA_CS0)
  55 #define V2M_NOR1                (V2M_PA_CS1)
  56 #define V2M_SRAM                (V2M_PA_CS2)
  57 #define V2M_VIDEO_SRAM          (V2M_PA_CS3 + 0x00000000)
  58 #define V2M_LAN9118             (V2M_PA_CS3 + 0x02000000)
  59 #define V2M_ISP1761             (V2M_PA_CS3 + 0x03000000)
  60
  61 /* Common peripherals relative to CS7. */
  62 #define V2M_AACI                (V2M_PA_CS7 + V2M_PERIPH_OFFSET(4))
  63 #define V2M_MMCI                (V2M_PA_CS7 + V2M_PERIPH_OFFSET(5))
  64 #define V2M_KMI0                (V2M_PA_CS7 + V2M_PERIPH_OFFSET(6))
  65 #define V2M_KMI1                (V2M_PA_CS7 + V2M_PERIPH_OFFSET(7))
  66
  67 #define V2M_UART0               (V2M_PA_CS7 + V2M_PERIPH_OFFSET(9))
  68 #define V2M_UART1               (V2M_PA_CS7 + V2M_PERIPH_OFFSET(10))
  69 #define V2M_UART2               (V2M_PA_CS7 + V2M_PERIPH_OFFSET(11))
  70 #define V2M_UART3               (V2M_PA_CS7 + V2M_PERIPH_OFFSET(12))
  71
  72 #define V2M_WDT                 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(15))
  73
  74 #define V2M_TIMER01             (V2M_PA_CS7 + V2M_PERIPH_OFFSET(17))
  75 #define V2M_TIMER23             (V2M_PA_CS7 + V2M_PERIPH_OFFSET(18))
  76
  77 #define V2M_SERIAL_BUS_DVI      (V2M_PA_CS7 + V2M_PERIPH_OFFSET(22))
  78 #define V2M_RTC                 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(23))
  79
  80 #define V2M_CF                  (V2M_PA_CS7 + V2M_PERIPH_OFFSET(26))
  81
  82 #define V2M_CLCD                (V2M_PA_CS7 + V2M_PERIPH_OFFSET(31))
  83 #define V2M_SIZE_CS7            V2M_PERIPH_OFFSET(32)
  84
  85 /* System register offsets. */
  86 #define V2M_SYS_CFGDATA         (V2M_SYSREGS + 0x0a0)
  87 #define V2M_SYS_CFGCTRL         (V2M_SYSREGS + 0x0a4)
  88 #define V2M_SYS_CFGSTAT         (V2M_SYSREGS + 0x0a8)
  89
  90 /*
  91  * Configuration
  92  */
  93 #define SYS_CFG_START           (1 << 31)
  94 #define SYS_CFG_WRITE           (1 << 30)
  95 #define SYS_CFG_OSC             (1 << 20)
  96 #define SYS_CFG_VOLT            (2 << 20)
  97 #define SYS_CFG_AMP             (3 << 20)
  98 #define SYS_CFG_TEMP            (4 << 20)
  99 #define SYS_CFG_RESET           (5 << 20)
 100 #define SYS_CFG_SCC             (6 << 20)
 101 #define SYS_CFG_MUXFPGA         (7 << 20)
 102 #define SYS_CFG_SHUTDOWN        (8 << 20)
 103 #define SYS_CFG_REBOOT          (9 << 20)
 104 #define SYS_CFG_DVIMODE         (11 << 20)
 105 #define SYS_CFG_POWER           (12 << 20)
 106 #define SYS_CFG_SITE_MB         (0 << 16)
 107 #define SYS_CFG_SITE_DB1        (1 << 16)
 108 #define SYS_CFG_SITE_DB2        (2 << 16)
 109 #define SYS_CFG_STACK(n)        ((n) << 12)
 110
 111 #define SYS_CFG_ERR             (1 << 1)
 112 #define SYS_CFG_COMPLETE        (1 << 0)
 113
 114 /* Board info register */
 115 #define SYS_ID                          V2M_SYSREGS
 116 #define CONFIG_REVISION_TAG             1
 117
 118 #define CONFIG_SYS_MEMTEST_START        V2M_BASE
 119 #define CONFIG_SYS_MEMTEST_END          0x20000000
 120 #define CONFIG_SYS_HZ                   1000
 121
 122 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs */
 123 #define CONFIG_SETUP_MEMORY_TAGS        1
 124 #define CONFIG_SYS_L2CACHE_OFF          1
 125 #define CONFIG_INITRD_TAG               1
 126
 127 #define CONFIG_OF_LIBFDT                1
 128
 129 /* Size of malloc() pool */
 130 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 128 * 1024)
 131
 132 #define SCTL_BASE                       V2M_SYSCTL
 133 #define VEXPRESS_FLASHPROG_FLVPPEN      (1 << 0)
 134
 135 /* SMSC9115 Ethernet from SMSC9118 family */
 136 #define CONFIG_SMC911X                  1
 137 #define CONFIG_SMC911X_32_BIT           1
 138 #define CONFIG_SMC911X_BASE             V2M_LAN9118
 139
 140 /* PL011 Serial Configuration */
 141 #define CONFIG_PL011_SERIAL
 142 #define CONFIG_PL011_CLOCK              24000000
 143 #define CONFIG_PL01x_PORTS              {(void *)CONFIG_SYS_SERIAL0, \
 144                                          (void *)CONFIG_SYS_SERIAL1}
 145 #define CONFIG_CONS_INDEX               0
 146
 147 #define CONFIG_BAUDRATE                 38400
 148 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 149 #define CONFIG_SYS_SERIAL0              V2M_UART0
 150 #define CONFIG_SYS_SERIAL1              V2M_UART1
 151
 152 /* Command line configuration */
 153 #define CONFIG_CMD_BDI
 154 #define CONFIG_CMD_DHCP
 155 #define CONFIG_CMD_PXE
 156 #define CONFIG_MENU
 157 #define CONFIG_CMD_ELF
 158 #define CONFIG_CMD_ENV
 159 #define CONFIG_CMD_FLASH
 160 #define CONFIG_CMD_IMI
 161 #define CONFIG_CMD_MEMORY
 162 #define CONFIG_CMD_NET
 163 #define CONFIG_CMD_PING
 164 #define CONFIG_CMD_SAVEENV
 165 #define CONFIG_CMD_RUN
 166 #define CONFIG_CMD_BOOTZ
 167 #define CONFIG_SUPPORT_RAW_INITRD
 168
 169 #define CONFIG_CMD_FAT
 170 #define CONFIG_DOS_PARTITION            1
 171 #define CONFIG_MMC                      1
 172 #define CONFIG_CMD_MMC
 173 #define CONFIG_GENERIC_MMC
 174 #define CONFIG_ARM_PL180_MMCI
 175 #define CONFIG_ARM_PL180_MMCI_BASE      V2M_MMCI
 176 #define CONFIG_SYS_MMC_MAX_BLK_COUNT    127
 177 #define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
 178
 179 /* BOOTP options */
 180 #define CONFIG_BOOTP_BOOTFILESIZE
 181 #define CONFIG_BOOTP_BOOTPATH
 182 #define CONFIG_BOOTP_GATEWAY
 183 #define CONFIG_BOOTP_HOSTNAME
 184 #define CONFIG_BOOTP_PXE
 185 #define CONFIG_BOOTP_PXE_CLIENTARCH     0x100
 186
 187 /* Miscellaneous configurable options */
 188 #undef  CONFIG_SYS_CLKS_IN_HZ
 189 #define CONFIG_SYS_LOAD_ADDR            (V2M_BASE + 0x8000)
 190 #define LINUX_BOOT_PARAM_ADDR           (V2M_BASE + 0x2000)
 191 #define CONFIG_BOOTDELAY                2
 192
 193 /* Physical Memory Map */
 194 #define CONFIG_NR_DRAM_BANKS            2
 195 #define PHYS_SDRAM_1                    (V2M_BASE)      /* SDRAM Bank #1 */
 196 #define PHYS_SDRAM_2                    (((unsigned int)V2M_BASE) + \
 197                                         ((unsigned int)0x20000000))
 198 #define PHYS_SDRAM_1_SIZE               0x20000000      /* 512 MB */
 199 #define PHYS_SDRAM_2_SIZE               0x20000000      /* 512 MB */
 200
 201 /* additions for new relocation code */
 202 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 203 #define CONFIG_SYS_INIT_RAM_SIZE                0x1000
 204 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_SDRAM_BASE + \
 205                                          CONFIG_SYS_INIT_RAM_SIZE - \
 206                                          GENERATED_GBL_DATA_SIZE)
 207 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_GBL_DATA_OFFSET
 208
 209 /* Basic environment settings */
 210 #define CONFIG_BOOTCOMMAND              "run bootflash;"
 211 #ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
 212 #define CONFIG_PLATFORM_ENV_SETTINGS \
 213                 "loadaddr=0x80008000\0" \
 214                 "ramdisk_addr_r=0x61000000\0" \
 215                 "kernel_addr=0x44100000\0" \
 216                 "ramdisk_addr=0x44800000\0" \
 217                 "maxramdisk=0x1800000\0" \
 218                 "pxefile_addr_r=0x88000000\0" \
 219                 "kernel_addr_r=0x80008000\0"
 220 #elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
 221 #define CONFIG_PLATFORM_ENV_SETTINGS \
 222                 "loadaddr=0xa0008000\0" \
 223                 "ramdisk_addr_r=0x81000000\0" \
 224                 "kernel_addr=0x0c100000\0" \
 225                 "ramdisk_addr=0x0c800000\0" \
 226                 "maxramdisk=0x1800000\0" \
 227                 "pxefile_addr_r=0xa8000000\0" \
 228                 "kernel_addr_r=0xa0008000\0"
 229 #endif
 230 #define CONFIG_EXTRA_ENV_SETTINGS \
 231                 CONFIG_PLATFORM_ENV_SETTINGS \
 232                 "console=ttyAMA0,38400n8\0" \
 233                 "dram=1024M\0" \
 234                 "root=/dev/sda1 rw\0" \
 235                 "mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \
 236                         "24M@0x2000000(initrd)\0" \
 237                 "flashargs=setenv bootargs root=${root} console=${console} " \
 238                         "mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
 239                         "devtmpfs.mount=0  vmalloc=256M\0" \
 240                 "bootflash=run flashargs; " \
 241                         "cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
 242                         "bootm ${kernel_addr} ${ramdisk_addr_r}\0"
 243
 244 /* FLASH and environment organization */
 245 #define PHYS_FLASH_SIZE                 0x04000000      /* 64MB */
 246 #define CONFIG_SYS_FLASH_CFI            1
 247 #define CONFIG_FLASH_CFI_DRIVER         1
 248 #define CONFIG_SYS_FLASH_SIZE           0x04000000
 249 #define CONFIG_SYS_MAX_FLASH_BANKS      2
 250 #define CONFIG_SYS_FLASH_BASE0          V2M_NOR0
 251 #define CONFIG_SYS_FLASH_BASE1          V2M_NOR1
 252 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE0
 253
 254 /* Timeout values in ticks */
 255 #define CONFIG_SYS_FLASH_ERASE_TOUT     (2 * CONFIG_SYS_HZ) /* Erase Timeout */
 256 #define CONFIG_SYS_FLASH_WRITE_TOUT     (2 * CONFIG_SYS_HZ) /* Write Timeout */
 257
 258 /* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
 259 #define CONFIG_SYS_MAX_FLASH_SECT       259             /* Max sectors */
 260 #define FLASH_MAX_SECTOR_SIZE           0x00040000      /* 256 KB sectors */
 261
 262 /* Room required on the stack for the environment data */
 263 #define CONFIG_ENV_SIZE                 FLASH_MAX_SECTOR_SIZE
 264
 265 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
 266
 267 /*
 268  * Amount of flash used for environment:
 269  * We don't know which end has the small erase blocks so we use the penultimate
 270  * sector location for the environment
 271  */
 272 #define CONFIG_ENV_SECT_SIZE            FLASH_MAX_SECTOR_SIZE
 273 #define CONFIG_ENV_OVERWRITE            1
 274
 275 /* Store environment at top of flash */
 276 #define CONFIG_ENV_IS_IN_FLASH          1
 277 #define CONFIG_ENV_OFFSET               (PHYS_FLASH_SIZE - \
 278                                         (2 * CONFIG_ENV_SECT_SIZE))
 279 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE1 + \
 280                                          CONFIG_ENV_OFFSET)
 281 #define CONFIG_SYS_FLASH_PROTECTION     /* The devices have real protection */
 282 #define CONFIG_SYS_FLASH_EMPTY_INFO     /* flinfo indicates empty blocks */
 283 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE0, \
 284                                           CONFIG_SYS_FLASH_BASE1 }
 285
 286 /* Monitor Command Prompt */
 287 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 288 #define CONFIG_SYS_PROMPT               "VExpress# "
 289 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 290                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 291 #define CONFIG_SYS_HUSH_PARSER
 292
 293 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE /* Boot args buffer */
 294 #define CONFIG_CMD_SOURCE
 295 #define CONFIG_SYS_LONGHELP
 296 #define CONFIG_CMDLINE_EDITING          1
 297 #define CONFIG_SYS_MAXARGS              16      /* max command args */
 298
 299 #endif /* VEXPRESS_COMMON_H */