include/configs/vme8349.h

   1 /*
   2  * esd vme8349 U-Boot configuration file
   3  * Copyright (c) 2008, 2009 esd gmbh Hannover Germany
   4  *
   5  * (C) Copyright 2006-2010
   6  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   7  *
   8  * reinhard.arlt@esd-electronics.de
   9  * Based on the MPC8349EMDS config.
  10  *
  11  * See file CREDITS for list of people who contributed to this
  12  * project.
  13  *
  14  * This program is free software; you can redistribute it and/or
  15  * modify it under the terms of the GNU General Public License as
  16  * published by the Free Software Foundation; either version 2 of
  17  * the License, or (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, write to the Free Software
  26  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  27  * MA 02111-1307 USA
  28  */
  29
  30 /*
  31  * vme8349 board configuration file.
  32  */
  33
  34 #ifndef __CONFIG_H
  35 #define __CONFIG_H
  36
  37 /*
  38  * Top level Makefile configuration choices
  39  */
  40 #ifdef CONFIG_CADDY2
  41 #define VME_CADDY2
  42 #endif
  43
  44 /*
  45  * High Level Configuration Options
  46  */
  47 #define CONFIG_E300             1       /* E300 Family */
  48 #define CONFIG_MPC83xx          1       /* MPC83xx family */
  49 #define CONFIG_MPC834x          1       /* MPC834x family */
  50 #define CONFIG_MPC8349          1       /* MPC8349 specific */
  51 #define CONFIG_VME8349          1       /* ESD VME8349 board specific */
  52
  53 #define CONFIG_SYS_TEXT_BASE    0xFFF00000
  54
  55 #define CONFIG_MISC_INIT_R
  56
  57 #define CONFIG_PCI
  58 /* Don't enable PCI2 on vme834x - it doesn't exist physically. */
  59 #undef CONFIG_MPC83XX_PCI2              /* support for 2nd PCI controller */
  60
  61 #define CONFIG_PCI_66M
  62 #ifdef CONFIG_PCI_66M
  63 #define CONFIG_83XX_CLKIN       66000000        /* in Hz */
  64 #else
  65 #define CONFIG_83XX_CLKIN       33000000        /* in Hz */
  66 #endif
  67
  68 #ifndef CONFIG_SYS_CLK_FREQ
  69 #ifdef CONFIG_PCI_66M
  70 #define CONFIG_SYS_CLK_FREQ     66000000
  71 #define HRCWL_CSB_TO_CLKIN      HRCWL_CSB_TO_CLKIN_4X1
  72 #else
  73 #define CONFIG_SYS_CLK_FREQ     33000000
  74 #define HRCWL_CSB_TO_CLKIN      HRCWL_CSB_TO_CLKIN_8X1
  75 #endif
  76 #endif
  77
  78 #define CONFIG_SYS_IMMR         0xE0000000
  79
  80 #undef CONFIG_SYS_DRAM_TEST                     /* memory test, takes time */
  81 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest region */
  82 #define CONFIG_SYS_MEMTEST_END          0x00100000
  83
  84 /*
  85  * DDR Setup
  86  */
  87 #define CONFIG_DDR_ECC                  /* only for ECC DDR module */
  88 #define CONFIG_DDR_ECC_CMD              /* use DDR ECC user commands */
  89 #define CONFIG_SPD_EEPROM
  90 #define SPD_EEPROM_ADDRESS              0x54
  91 #define CONFIG_SYS_READ_SPD             vme8349_read_spd
  92 #define CONFIG_SYS_83XX_DDR_USES_CS0    /* esd; Fsl board uses CS2/CS3 */
  93
  94 /*
  95  * 32-bit data path mode.
  96  *
  97  * Please note that using this mode for devices with the real density of 64-bit
  98  * effectively reduces the amount of available memory due to the effect of
  99  * wrapping around while translating address to row/columns, for example in the
 100  * 256MB module the upper 128MB get aliased with contents of the lower
 101  * 128MB); normally this define should be used for devices with real 32-bit
 102  * data path.
 103  */
 104 #undef CONFIG_DDR_32BIT
 105
 106 #define CONFIG_SYS_DDR_BASE             0x00000000      /* DDR is sys memory*/
 107 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 108 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 109 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   (DDR_SDRAM_CLK_CNTL_SS_EN | \
 110                                          DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
 111 #define CONFIG_DDR_2T_TIMING
 112 #define CONFIG_SYS_DDRCDR               0x80080001
 113
 114 /*
 115  * FLASH on the Local Bus
 116  */
 117 #define CONFIG_SYS_FLASH_CFI
 118 #define CONFIG_FLASH_CFI_DRIVER                         /* use the CFI driver */
 119 #ifdef VME_CADDY2
 120 #define CONFIG_SYS_FLASH_BASE           0xffc00000      /* start of FLASH   */
 121 #define CONFIG_SYS_FLASH_SIZE           4               /* flash size in MB */
 122 #define CONFIG_SYS_BR0_PRELIM           (CONFIG_SYS_FLASH_BASE | \
 123                                          (2 << BR_PS_SHIFT) |   /*  16bit */ \
 124                                          BR_V)                  /* valid */
 125
 126 #define CONFIG_SYS_OR0_PRELIM           0xffc06ff7      /*   4 MB flash size */
 127 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 128 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x80000015      /*   4 MB window size */
 129 #else
 130 #define CONFIG_SYS_FLASH_BASE           0xf8000000      /* start of FLASH   */
 131 #define CONFIG_SYS_FLASH_SIZE           128             /* flash size in MB */
 132 #define CONFIG_SYS_BR0_PRELIM           (CONFIG_SYS_FLASH_BASE | \
 133                                          (2 << BR_PS_SHIFT) |   /*  16bit */ \
 134                                          BR_V)                  /* valid */
 135
 136 #define CONFIG_SYS_OR0_PRELIM           0xf8006ff7      /* 128 MB flash size */
 137 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 138 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x8000001a      /* 128 MB window size */
 139 #endif
 140 /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 141
 142 #define CONFIG_SYS_BR1_PRELIM           (0xf0000000 | 0x00001801)
 143 #define CONFIG_SYS_OR1_PRELIM           (0xfffc0008 | 0x00000200)
 144 #define CONFIG_SYS_LBLAWBAR1_PRELIM     0xf0000000
 145 #define CONFIG_SYS_LBLAWAR1_PRELIM      (0x80000000 | 0x00000011)
 146
 147 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 148 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device*/
 149
 150 #undef CONFIG_SYS_FLASH_CHECKSUM
 151 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase TO (ms) */
 152 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write TO (ms) */
 153
 154 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 155
 156 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 157 #define CONFIG_SYS_RAMBOOT
 158 #else
 159 #undef CONFIG_SYS_RAMBOOT
 160 #endif
 161
 162 #define CONFIG_SYS_INIT_RAM_LOCK        1
 163 #define CONFIG_SYS_INIT_RAM_ADDR        0xF7000000      /* Initial RAM addr */
 164 #define CONFIG_SYS_INIT_RAM_SIZE                0x1000          /* size */
 165
 166 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 167                                          GENERATED_GBL_DATA_SIZE)
 168 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 169
 170 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)    /* Reserve 256 kB */
 171 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024)    /* Malloc size */
 172
 173 /*
 174  * Local Bus LCRR and LBCR regs
 175  *    LCRR:  no DLL bypass, Clock divider is 4
 176  * External Local Bus rate is
 177  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
 178  */
 179 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 180 #define CONFIG_SYS_LBC_LBCR     0x00000000
 181
 182 #undef CONFIG_SYS_LB_SDRAM      /* if board has SDRAM on local bus */
 183
 184 /*
 185  * Serial Port
 186  */
 187 #define CONFIG_CONS_INDEX       1
 188 #define CONFIG_SYS_NS16550
 189 #define CONFIG_SYS_NS16550_SERIAL
 190 #define CONFIG_SYS_NS16550_REG_SIZE     1
 191 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 192
 193 #define CONFIG_SYS_BAUDRATE_TABLE  \
 194         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 195
 196 #define CONFIG_SYS_NS16550_COM1         (CONFIG_SYS_IMMR + 0x4500)
 197 #define CONFIG_SYS_NS16550_COM2         (CONFIG_SYS_IMMR + 0x4600)
 198
 199 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
 200 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 201 /* Use the HUSH parser */
 202 #define CONFIG_SYS_HUSH_PARSER
 203 #ifdef CONFIG_SYS_HUSH_PARSER
 204 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 205 #endif
 206
 207 /* pass open firmware flat tree */
 208 #define CONFIG_OF_LIBFDT
 209 #define CONFIG_OF_BOARD_SETUP
 210 #define CONFIG_OF_STDOUT_VIA_ALIAS
 211
 212 /* I2C */
 213 #define CONFIG_I2C_MULTI_BUS
 214 #define CONFIG_HARD_I2C         /* I2C with hardware support*/
 215 #undef CONFIG_SOFT_I2C          /* I2C bit-banged */
 216 #define CONFIG_FSL_I2C
 217 #define CONFIG_I2C_CMD_TREE
 218 #define CONFIG_SYS_I2C_SPEED    400000  /* I2C speed and slave address */
 219 #define CONFIG_SYS_I2C_SLAVE    0x7F
 220 #define CONFIG_SYS_I2C_NOPROBES {{0, 0x69}} /* Don't probe these addrs */
 221 #define CONFIG_SYS_I2C1_OFFSET  0x3000
 222 #define CONFIG_SYS_I2C2_OFFSET  0x3100
 223 #define CONFIG_SYS_I2C_OFFSET   CONFIG_SYS_I2C1_OFFSET
 224 /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
 225
 226 #define CONFIG_SYS_I2C_8574_ADDR2       0x20    /* I2C1, PCF8574 */
 227
 228 /* TSEC */
 229 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 230 #define CONFIG_SYS_TSEC1        (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
 231 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 232 #define CONFIG_SYS_TSEC2        (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET)
 233
 234 /*
 235  * General PCI
 236  * Addresses are mapped 1-1.
 237  */
 238 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 239 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 240 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 241 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 242 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 243 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 244 #define CONFIG_SYS_PCI1_IO_BASE         0x00000000
 245 #define CONFIG_SYS_PCI1_IO_PHYS         0xE2000000
 246 #define CONFIG_SYS_PCI1_IO_SIZE         0x00100000      /* 1M */
 247
 248 #define CONFIG_SYS_PCI2_MEM_BASE        0xA0000000
 249 #define CONFIG_SYS_PCI2_MEM_PHYS        CONFIG_SYS_PCI2_MEM_BASE
 250 #define CONFIG_SYS_PCI2_MEM_SIZE        0x10000000      /* 256M */
 251 #define CONFIG_SYS_PCI2_MMIO_BASE       0xB0000000
 252 #define CONFIG_SYS_PCI2_MMIO_PHYS       CONFIG_SYS_PCI2_MMIO_BASE
 253 #define CONFIG_SYS_PCI2_MMIO_SIZE       0x10000000      /* 256M */
 254 #define CONFIG_SYS_PCI2_IO_BASE         0x00000000
 255 #define CONFIG_SYS_PCI2_IO_PHYS         0xE2100000
 256 #define CONFIG_SYS_PCI2_IO_SIZE         0x00100000      /* 1M */
 257
 258 #if defined(CONFIG_PCI)
 259
 260 #define PCI_64BIT
 261 #define PCI_ONE_PCI1
 262 #if defined(PCI_64BIT)
 263 #undef PCI_ALL_PCI1
 264 #undef PCI_TWO_PCI1
 265 #undef PCI_ONE_PCI1
 266 #endif
 267
 268 #ifndef VME_CADDY2
 269 #endif
 270 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 271
 272 #undef CONFIG_EEPRO100
 273 #undef CONFIG_TULIP
 274
 275 #if !defined(CONFIG_PCI_PNP)
 276         #define PCI_ENET0_IOADDR        0xFIXME
 277         #define PCI_ENET0_MEMADDR       0xFIXME
 278         #define PCI_IDSEL_NUMBER        0xFIXME
 279 #endif
 280
 281 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 282 #define CONFIG_SYS_PCI_SUBSYS_VENDORID  0x1957  /* Freescale */
 283
 284 #endif  /* CONFIG_PCI */
 285
 286 /*
 287  * TSEC configuration
 288  */
 289 #ifdef VME_CADDY2
 290 #define CONFIG_E1000
 291 #else
 292 #define CONFIG_TSEC_ENET                /* TSEC ethernet support */
 293 #endif
 294
 295 #if defined(CONFIG_TSEC_ENET)
 296
 297 #define CONFIG_GMII                     /* MII PHY management */
 298 #define CONFIG_TSEC1
 299 #define CONFIG_TSEC1_NAME       "TSEC0"
 300 #define CONFIG_TSEC2
 301 #define CONFIG_TSEC2_NAME       "TSEC1"
 302 #define CONFIG_PHY_M88E1111
 303 #define TSEC1_PHY_ADDR          0x08
 304 #define TSEC2_PHY_ADDR          0x10
 305 #define TSEC1_PHYIDX            0
 306 #define TSEC2_PHYIDX            0
 307 #define TSEC1_FLAGS             TSEC_GIGABIT
 308 #define TSEC2_FLAGS             TSEC_GIGABIT
 309
 310 /* Options are: TSEC[0-1] */
 311 #define CONFIG_ETHPRIME         "TSEC0"
 312
 313 #endif  /* CONFIG_TSEC_ENET */
 314
 315 /*
 316  * Environment
 317  */
 318 #ifndef CONFIG_SYS_RAMBOOT
 319         #define CONFIG_ENV_IS_IN_FLASH
 320         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + 0xc0000)
 321         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 322         #define CONFIG_ENV_SIZE         0x2000
 323
 324 /* Address and size of Redundant Environment Sector     */
 325 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 326 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 327
 328 #else
 329         #define CONFIG_SYS_NO_FLASH             /* Flash is not usable now */
 330         #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 331         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 332         #define CONFIG_ENV_SIZE         0x2000
 333 #endif
 334
 335 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 336 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 337
 338 /*
 339  * BOOTP options
 340  */
 341 #define CONFIG_BOOTP_BOOTFILESIZE
 342 #define CONFIG_BOOTP_BOOTPATH
 343 #define CONFIG_BOOTP_GATEWAY
 344 #define CONFIG_BOOTP_HOSTNAME
 345
 346 /*
 347  * Command line configuration.
 348  */
 349 #include <config_cmd_default.h>
 350
 351 #define CONFIG_CMD_I2C
 352 #define CONFIG_CMD_MII
 353 #define CONFIG_CMD_PING
 354 #define CONFIG_CMD_DATE
 355 #define CONFIG_SYS_RTC_BUS_NUM  0x01
 356 #define CONFIG_SYS_I2C_RTC_ADDR 0x32
 357 #define CONFIG_RTC_RX8025
 358 #define CONFIG_CMD_TSI148
 359
 360 #if defined(CONFIG_PCI)
 361     #define CONFIG_CMD_PCI
 362 #endif
 363
 364 #if defined(CONFIG_SYS_RAMBOOT)
 365     #undef CONFIG_CMD_ENV
 366     #undef CONFIG_CMD_LOADS
 367 #endif
 368
 369 #define CONFIG_CMD_ELF
 370 /* Pass Ethernet MAC to VxWorks */
 371 #define CONFIG_SYS_VXWORKS_MAC_PTR      0x000043f0
 372
 373 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 374
 375 /*
 376  * Miscellaneous configurable options
 377  */
 378 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 379 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 380 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 381
 382 #if defined(CONFIG_CMD_KGDB)
 383         #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 384 #else
 385         #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 386 #endif
 387
 388 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 389 #define CONFIG_SYS_MAXARGS      16              /* max num of command args */
 390 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */
 391 #define CONFIG_SYS_HZ           1000            /* decr freq: 1ms ticks */
 392
 393 /*
 394  * For booting Linux, the board info and command line data
 395  * have to be in the first 256 MB of memory, since this is
 396  * the maximum mapped by the Linux kernel during initialization.
 397  */
 398 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)     /* Init Memory map for Linux*/
 399
 400 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
 401
 402 #define CONFIG_SYS_HRCW_LOW (\
 403         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 404         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 405         HRCWL_CSB_TO_CLKIN |\
 406         HRCWL_VCO_1X2 |\
 407         HRCWL_CORE_TO_CSB_2X1)
 408
 409 #if defined(PCI_64BIT)
 410 #define CONFIG_SYS_HRCW_HIGH (\
 411         HRCWH_PCI_HOST |\
 412         HRCWH_64_BIT_PCI |\
 413         HRCWH_PCI1_ARBITER_ENABLE |\
 414         HRCWH_PCI2_ARBITER_DISABLE |\
 415         HRCWH_CORE_ENABLE |\
 416         HRCWH_FROM_0X00000100 |\
 417         HRCWH_BOOTSEQ_DISABLE |\
 418         HRCWH_SW_WATCHDOG_DISABLE |\
 419         HRCWH_ROM_LOC_LOCAL_16BIT |\
 420         HRCWH_TSEC1M_IN_GMII |\
 421         HRCWH_TSEC2M_IN_GMII)
 422 #else
 423 #define CONFIG_SYS_HRCW_HIGH (\
 424         HRCWH_PCI_HOST |\
 425         HRCWH_32_BIT_PCI |\
 426         HRCWH_PCI1_ARBITER_ENABLE |\
 427         HRCWH_PCI2_ARBITER_ENABLE |\
 428         HRCWH_CORE_ENABLE |\
 429         HRCWH_FROM_0X00000100 |\
 430         HRCWH_BOOTSEQ_DISABLE |\
 431         HRCWH_SW_WATCHDOG_DISABLE |\
 432         HRCWH_ROM_LOC_LOCAL_16BIT |\
 433         HRCWH_TSEC1M_IN_GMII |\
 434         HRCWH_TSEC2M_IN_GMII)
 435 #endif
 436
 437 /* System IO Config */
 438 #define CONFIG_SYS_SICRH 0
 439 #define CONFIG_SYS_SICRL SICRL_LDP_A
 440
 441 #define CONFIG_SYS_HID0_INIT    0x000000000
 442 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
 443                                  HID0_ENABLE_INSTRUCTION_CACHE)
 444
 445 #define CONFIG_SYS_HID2         HID2_HBE
 446
 447 #define CONFIG_SYS_GPIO1_PRELIM
 448 #define CONFIG_SYS_GPIO1_DIR    0x00100000
 449 #define CONFIG_SYS_GPIO1_DAT    0x00100000
 450
 451 #define CONFIG_SYS_GPIO2_PRELIM
 452 #define CONFIG_SYS_GPIO2_DIR    0x78900000
 453 #define CONFIG_SYS_GPIO2_DAT    0x70100000
 454
 455 #define CONFIG_HIGH_BATS                /* High BATs supported */
 456
 457 /* DDR @ 0x00000000 */
 458 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \
 459                                  BATL_MEMCOHERENCE)
 460 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \
 461                                  BATU_VS | BATU_VP)
 462
 463 /* PCI @ 0x80000000 */
 464 #ifdef CONFIG_PCI
 465 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | \
 466                                  BATL_MEMCOHERENCE)
 467 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \
 468                                  BATU_VS | BATU_VP)
 469 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | \
 470                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 471 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | \
 472                                  BATU_VS | BATU_VP)
 473 #else
 474 #define CONFIG_SYS_IBAT1L       (0)
 475 #define CONFIG_SYS_IBAT1U       (0)
 476 #define CONFIG_SYS_IBAT2L       (0)
 477 #define CONFIG_SYS_IBAT2U       (0)
 478 #endif
 479
 480 #ifdef CONFIG_MPC83XX_PCI2
 481 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | \
 482                                  BATL_MEMCOHERENCE)
 483 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | \
 484                                  BATU_VS | BATU_VP)
 485 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | \
 486                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 487 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | \
 488                                  BATU_VS | BATU_VP)
 489 #else
 490 #define CONFIG_SYS_IBAT3L       (0)
 491 #define CONFIG_SYS_IBAT3U       (0)
 492 #define CONFIG_SYS_IBAT4L       (0)
 493 #define CONFIG_SYS_IBAT4U       (0)
 494 #endif
 495
 496 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
 497 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR | BATL_PP_10 | \
 498                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 499 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR | BATU_BL_256M | \
 500                                  BATU_VS | BATU_VP)
 501
 502 #define CONFIG_SYS_IBAT6L       (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
 503 #define CONFIG_SYS_IBAT6U       (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 504
 505 #if (CONFIG_SYS_DDR_SIZE == 512)
 506 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_SDRAM_BASE+0x10000000 | \
 507                                  BATL_PP_10 | BATL_MEMCOHERENCE)
 508 #define CONFIG_SYS_IBAT7U       (CONFIG_SYS_SDRAM_BASE+0x10000000 | \
 509                                  BATU_BL_256M | BATU_VS | BATU_VP)
 510 #else
 511 #define CONFIG_SYS_IBAT7L       (0)
 512 #define CONFIG_SYS_IBAT7U       (0)
 513 #endif
 514
 515 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 516 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 517 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 518 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 519 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 520 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 521 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 522 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 523 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 524 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 525 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 526 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 527 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 528 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 529 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 530 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 531
 532 #if defined(CONFIG_CMD_KGDB)
 533 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 534 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 535 #endif
 536
 537 /*
 538  * Environment Configuration
 539  */
 540 #define CONFIG_ENV_OVERWRITE
 541
 542 #if defined(CONFIG_TSEC_ENET)
 543 #define CONFIG_HAS_ETH0
 544 #define CONFIG_HAS_ETH1
 545 #endif
 546
 547 #define CONFIG_HOSTNAME         VME8349
 548 #define CONFIG_ROOTPATH         "/tftpboot/rootfs"
 549 #define CONFIG_BOOTFILE         "uImage"
 550
 551 #define CONFIG_LOADADDR         800000  /* def location for tftp and bootm */
 552
 553 #define CONFIG_BOOTDELAY        6       /* -1 disables auto-boot */
 554 #undef  CONFIG_BOOTARGS                 /* boot command will set bootargs */
 555
 556 #define CONFIG_BAUDRATE  9600
 557
 558 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 559         "netdev=eth0\0"                                                 \
 560         "hostname=vme8349\0"                                            \
 561         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 562                 "nfsroot=${serverip}:${rootpath}\0"                     \
 563         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 564         "addip=setenv bootargs ${bootargs} "                            \
 565                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 566                 ":${hostname}:${netdev}:off panic=1\0"                  \
 567         "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 568         "flash_nfs=run nfsargs addip addtty;"                           \
 569                 "bootm ${kernel_addr}\0"                                \
 570         "flash_self=run ramargs addip addtty;"                          \
 571                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 572         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
 573                 "bootm\0"                                               \
 574         "load=tftp 100000 /tftpboot/bdi2000/vme8349.bin\0"              \
 575         "update=protect off fff00000 fff3ffff; "                        \
 576                 "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \
 577         "upd=run load update\0"                                         \
 578         "fdtaddr=780000\0"                                              \
 579         "fdtfile=vme8349.dtb\0"                                         \
 580         ""
 581
 582 #define CONFIG_NFSBOOTCOMMAND                                           \
 583    "setenv bootargs root=/dev/nfs rw "                                  \
 584       "nfsroot=$serverip:$rootpath "                                    \
 585       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 586       "console=$consoledev,$baudrate $othbootargs;"                     \
 587    "tftp $loadaddr $bootfile;"                                          \
 588    "tftp $fdtaddr $fdtfile;"                                            \
 589    "bootm $loadaddr - $fdtaddr"
 590
 591 #define CONFIG_RAMBOOTCOMMAND                                           \
 592    "setenv bootargs root=/dev/ram rw "                                  \
 593       "console=$consoledev,$baudrate $othbootargs;"                     \
 594    "tftp $ramdiskaddr $ramdiskfile;"                                    \
 595    "tftp $loadaddr $bootfile;"                                          \
 596    "tftp $fdtaddr $fdtfile;"                                            \
 597    "bootm $loadaddr $ramdiskaddr $fdtaddr"
 598
 599 #define CONFIG_BOOTCOMMAND      "run flash_self"
 600
 601 #ifndef __ASSEMBLY__
 602 int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen,
 603                      unsigned char *buffer, int len);
 604 #endif
 605
 606 #endif  /* __CONFIG_H */