include/configs/wandboard.h

   1 /*
   2  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Wandboard.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  15 #define CONFIG_SPL_MMC_SUPPORT
  16 #include "imx6_spl.h"
  17
  18 #define MACH_TYPE_WANDBOARD             4412
  19 #define CONFIG_MACH_TYPE                MACH_TYPE_WANDBOARD
  20
  21 /* Size of malloc() pool */
  22 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  23
  24 #define CONFIG_BOARD_EARLY_INIT_F
  25 #define CONFIG_BOARD_LATE_INIT
  26
  27 #define CONFIG_MXC_UART
  28 #define CONFIG_MXC_UART_BASE            UART1_BASE
  29
  30 /* allow to overwrite serial and ethaddr */
  31 #define CONFIG_ENV_OVERWRITE
  32 #define CONFIG_CONS_INDEX               1
  33 #define CONFIG_BAUDRATE                 115200
  34
  35 /* Command definition */
  36
  37 #define CONFIG_CMD_BMODE
  38 #define CONFIG_CMD_SETEXPR
  39
  40 #define CONFIG_SYS_MEMTEST_START        0x10000000
  41 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  42
  43 /* I2C Configs */
  44 #define CONFIG_CMD_I2C
  45 #define CONFIG_SYS_I2C
  46 #define CONFIG_SYS_I2C_MXC
  47 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  48 #define CONFIG_SYS_I2C_SPEED            100000
  49
  50 /* MMC Configuration */
  51 #define CONFIG_FSL_ESDHC
  52 #define CONFIG_FSL_USDHC
  53 #define CONFIG_SYS_FSL_USDHC_NUM        2
  54 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  55
  56 #define CONFIG_MMC
  57 #define CONFIG_CMD_MMC
  58 #define CONFIG_GENERIC_MMC
  59 #define CONFIG_BOUNCE_BUFFER
  60 #define CONFIG_CMD_EXT2
  61 #define CONFIG_CMD_FAT
  62 #define CONFIG_DOS_PARTITION
  63
  64 /* USB Configs */
  65 #define CONFIG_CMD_USB
  66 #define CONFIG_USB_EHCI
  67 #define CONFIG_USB_EHCI_MX6
  68 #define CONFIG_USB_STORAGE
  69 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  70 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  71 #define CONFIG_MXC_USB_FLAGS            0
  72
  73 /* Ethernet Configuration */
  74 #define CONFIG_CMD_PING
  75 #define CONFIG_CMD_DHCP
  76 #define CONFIG_CMD_MII
  77 #define CONFIG_CMD_NET
  78 #define CONFIG_FEC_MXC
  79 #define CONFIG_MII
  80 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  81 #define CONFIG_FEC_XCV_TYPE             RGMII
  82 #define CONFIG_ETHPRIME                 "FEC"
  83 #define CONFIG_FEC_MXC_PHYADDR          1
  84 #define CONFIG_PHYLIB
  85 #define CONFIG_PHY_ATHEROS
  86
  87 /* Framebuffer */
  88 #define CONFIG_VIDEO
  89 #define CONFIG_VIDEO_IPUV3
  90 #define CONFIG_CFB_CONSOLE
  91 #define CONFIG_VGA_AS_SINGLE_DEVICE
  92 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  93 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  94 #define CONFIG_VIDEO_BMP_RLE8
  95 #define CONFIG_SPLASH_SCREEN
  96 #define CONFIG_SPLASH_SCREEN_ALIGN
  97 #define CONFIG_BMP_16BPP
  98 #define CONFIG_VIDEO_LOGO
  99 #define CONFIG_VIDEO_BMP_LOGO
 100 #define CONFIG_IPUV3_CLK 260000000
 101 #define CONFIG_CMD_HDMIDETECT
 102 #define CONFIG_IMX_HDMI
 103 #define CONFIG_IMX_VIDEO_SKIP
 104
 105 #define CONFIG_CMD_FUSE
 106 #ifdef CONFIG_CMD_FUSE
 107 #define CONFIG_MXC_OCOTP
 108 #endif
 109
 110 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 111 #define CONFIG_EXTRA_ENV_SETTINGS \
 112         "script=boot.scr\0" \
 113         "image=zImage\0" \
 114         "console=ttymxc0\0" \
 115         "splashpos=m,m\0" \
 116         "fdtfile=undefined\0" \
 117         "fdt_high=0xffffffff\0" \
 118         "initrd_high=0xffffffff\0" \
 119         "fdt_addr=0x18000000\0" \
 120         "boot_fdt=try\0" \
 121         "ip_dyn=yes\0" \
 122         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 123         "mmcpart=1\0" \
 124         "mmcroot=/dev/mmcblk2p2 rootwait rw\0" \
 125         "update_sd_firmware_filename=u-boot.imx\0" \
 126         "update_sd_firmware=" \
 127                 "if test ${ip_dyn} = yes; then " \
 128                         "setenv get_cmd dhcp; " \
 129                 "else " \
 130                         "setenv get_cmd tftp; " \
 131                 "fi; " \
 132                 "if mmc dev ${mmcdev}; then "   \
 133                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 134                                 "setexpr fw_sz ${filesize} / 0x200; " \
 135                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 136                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 137                         "fi; "  \
 138                 "fi\0" \
 139         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 140                 "root=${mmcroot}; run videoargs\0" \
 141         "videoargs=" \
 142                 "setenv nextcon 0; " \
 143                 "if hdmidet; then " \
 144                         "setenv bootargs ${bootargs} " \
 145                                 "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
 146                                         "if=RGB24; " \
 147                         "setenv fbmen fbmem=28M; " \
 148                         "setexpr nextcon ${nextcon} + 1; " \
 149                 "else " \
 150                         "echo - no HDMI monitor;" \
 151                 "fi; " \
 152                 "i2c dev 1; " \
 153                 "if i2c probe 0x10; then " \
 154                         "setenv bootargs ${bootargs} " \
 155                                 "video=mxcfb${nextcon}:dev=lcd,800x480@60," \
 156                                         "if=RGB666,bpp=32; " \
 157                         "if test 0 -eq ${nextcon}; then " \
 158                                 "setenv fbmem fbmem=10M; " \
 159                         "else " \
 160                                 "setenv fbmem ${fbmem},10M; " \
 161                         "fi; " \
 162                         "setexpr nextcon ${nextcon} + 1; " \
 163                 "else " \
 164                         "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
 165                 "fi; " \
 166                 "setenv bootargs ${bootargs} ${fbmem}\0" \
 167         "loadbootscript=" \
 168                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 169         "bootscript=echo Running bootscript from mmc ...; " \
 170                 "source\0" \
 171         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 172         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
 173         "mmcboot=echo Booting from mmc ...; " \
 174                 "run mmcargs; " \
 175                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 176                         "if run loadfdt; then " \
 177                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 178                         "else " \
 179                                 "if test ${boot_fdt} = try; then " \
 180                                         "bootz; " \
 181                                 "else " \
 182                                         "echo WARN: Cannot load the DT; " \
 183                                 "fi; " \
 184                         "fi; " \
 185                 "else " \
 186                         "bootz; " \
 187                 "fi;\0" \
 188         "netargs=setenv bootargs console=${console},${baudrate} " \
 189                 "root=/dev/nfs " \
 190         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 191                 "netboot=echo Booting from net ...; " \
 192                 "run netargs; " \
 193                 "if test ${ip_dyn} = yes; then " \
 194                         "setenv get_cmd dhcp; " \
 195                 "else " \
 196                         "setenv get_cmd tftp; " \
 197                 "fi; " \
 198                 "${get_cmd} ${image}; " \
 199                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 200                         "if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \
 201                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 202                         "else " \
 203                                 "if test ${boot_fdt} = try; then " \
 204                                         "bootz; " \
 205                                 "else " \
 206                                         "echo WARN: Cannot load the DT; " \
 207                                 "fi; " \
 208                         "fi; " \
 209                 "else " \
 210                         "bootz; " \
 211                 "fi;\0" \
 212         "findfdt="\
 213                 "if test $board_rev = MX6Q ; then " \
 214                         "setenv fdtfile imx6q-wandboard.dtb; fi; " \
 215                 "if test $board_rev = MX6DL ; then " \
 216                         "setenv fdtfile imx6dl-wandboard.dtb; fi; " \
 217                 "if test $fdtfile = undefined; then " \
 218                         "echo WARNING: Could not determine dtb to use; fi; \0" \
 219
 220 #define CONFIG_BOOTCOMMAND \
 221            "run findfdt; " \
 222            "mmc dev ${mmcdev}; if mmc rescan; then " \
 223                    "if run loadbootscript; then " \
 224                            "run bootscript; " \
 225                    "else " \
 226                            "if run loadimage; then " \
 227                                    "run mmcboot; " \
 228                            "else run netboot; " \
 229                            "fi; " \
 230                    "fi; " \
 231            "else run netboot; fi"
 232
 233 /* Miscellaneous configurable options */
 234 #define CONFIG_SYS_LONGHELP
 235 #define CONFIG_SYS_HUSH_PARSER
 236 #define CONFIG_AUTO_COMPLETE
 237 #define CONFIG_SYS_CBSIZE               256
 238 #define CONFIG_SYS_MAXARGS             16
 239 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 240
 241 #define CONFIG_CMDLINE_EDITING
 242
 243 /* Physical Memory Map */
 244 #define CONFIG_NR_DRAM_BANKS            1
 245 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 246
 247 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 248 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 249 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 250
 251 #define CONFIG_SYS_INIT_SP_OFFSET \
 252         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 253 #define CONFIG_SYS_INIT_SP_ADDR \
 254         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 255
 256 /* Environment organization */
 257 #define CONFIG_ENV_SIZE                 (8 * 1024)
 258
 259 #define CONFIG_ENV_IS_IN_MMC
 260 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 261 #define CONFIG_SYS_MMC_ENV_DEV          0
 262
 263 #define CONFIG_OF_LIBFDT
 264 #define CONFIG_CMD_BOOTZ
 265
 266 #ifndef CONFIG_SYS_DCACHE_OFF
 267 #define CONFIG_CMD_CACHE
 268 #endif
 269
 270 #endif                         /* __CONFIG_H * */