]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/mmc.h
1ac32f91fae5e1e8e1a120d1198a6b0c204a8acd
[karo-tx-uboot.git] / include / mmc.h
1 /*
2  * Copyright 2008,2010 Freescale Semiconductor, Inc
3  * Andy Fleming
4  *
5  * Based (loosely) on the Linux code
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef _MMC_H_
11 #define _MMC_H_
12
13 #include <linux/list.h>
14 #include <linux/compiler.h>
15 #include <part.h>
16
17 #define SD_VERSION_SD   0x20000
18 #define SD_VERSION_3    (SD_VERSION_SD | 0x300)
19 #define SD_VERSION_2    (SD_VERSION_SD | 0x200)
20 #define SD_VERSION_1_0  (SD_VERSION_SD | 0x100)
21 #define SD_VERSION_1_10 (SD_VERSION_SD | 0x10a)
22 #define MMC_VERSION_MMC         0x10000
23 #define MMC_VERSION_UNKNOWN     (MMC_VERSION_MMC)
24 #define MMC_VERSION_1_2         (MMC_VERSION_MMC | 0x102)
25 #define MMC_VERSION_1_4         (MMC_VERSION_MMC | 0x104)
26 #define MMC_VERSION_2_2         (MMC_VERSION_MMC | 0x202)
27 #define MMC_VERSION_3           (MMC_VERSION_MMC | 0x300)
28 #define MMC_VERSION_4           (MMC_VERSION_MMC | 0x400)
29 #define MMC_VERSION_4_1         (MMC_VERSION_MMC | 0x401)
30 #define MMC_VERSION_4_2         (MMC_VERSION_MMC | 0x402)
31 #define MMC_VERSION_4_3         (MMC_VERSION_MMC | 0x403)
32 #define MMC_VERSION_4_41        (MMC_VERSION_MMC | 0x429)
33 #define MMC_VERSION_4_5         (MMC_VERSION_MMC | 0x405)
34 #define MMC_VERSION_5_0         (MMC_VERSION_MMC | 0x500)
35
36 #define MMC_MODE_HS             (1 << 0)
37 #define MMC_MODE_HS_52MHz       (1 << 1)
38 #define MMC_MODE_4BIT           (1 << 2)
39 #define MMC_MODE_8BIT           (1 << 3)
40 #define MMC_MODE_SPI            (1 << 4)
41 #define MMC_MODE_HC             (1 << 5)
42 #define MMC_MODE_DDR_52MHz      (1 << 6)
43
44 #define SD_DATA_4BIT    0x00040000
45
46 #define IS_SD(x) (x->version & SD_VERSION_SD)
47
48 #define MMC_DATA_READ           1
49 #define MMC_DATA_WRITE          2
50
51 #define NO_CARD_ERR             -16 /* No SD/MMC card inserted */
52 #define UNUSABLE_ERR            -17 /* Unusable Card */
53 #define COMM_ERR                -18 /* Communications Error */
54 #define TIMEOUT                 -19
55 #define IN_PROGRESS             -20 /* operation is in progress */
56 #define SWITCH_ERR              -21 /* Card reports failure to switch mode */
57
58 #define MMC_CMD_GO_IDLE_STATE           0
59 #define MMC_CMD_SEND_OP_COND            1
60 #define MMC_CMD_ALL_SEND_CID            2
61 #define MMC_CMD_SET_RELATIVE_ADDR       3
62 #define MMC_CMD_SET_DSR                 4
63 #define MMC_CMD_SWITCH                  6
64 #define MMC_CMD_SELECT_CARD             7
65 #define MMC_CMD_SEND_EXT_CSD            8
66 #define MMC_CMD_SEND_CSD                9
67 #define MMC_CMD_SEND_CID                10
68 #define MMC_CMD_STOP_TRANSMISSION       12
69 #define MMC_CMD_SEND_STATUS             13
70 #define MMC_CMD_SET_BLOCKLEN            16
71 #define MMC_CMD_READ_SINGLE_BLOCK       17
72 #define MMC_CMD_READ_MULTIPLE_BLOCK     18
73 #define MMC_CMD_SET_BLOCK_COUNT         23
74 #define MMC_CMD_WRITE_SINGLE_BLOCK      24
75 #define MMC_CMD_WRITE_MULTIPLE_BLOCK    25
76 #define MMC_CMD_ERASE_GROUP_START       35
77 #define MMC_CMD_ERASE_GROUP_END         36
78 #define MMC_CMD_ERASE                   38
79 #define MMC_CMD_APP_CMD                 55
80 #define MMC_CMD_SPI_READ_OCR            58
81 #define MMC_CMD_SPI_CRC_ON_OFF          59
82 #define MMC_CMD_RES_MAN                 62
83
84 #define MMC_CMD62_ARG1                  0xefac62ec
85 #define MMC_CMD62_ARG2                  0xcbaea7
86
87
88 #define SD_CMD_SEND_RELATIVE_ADDR       3
89 #define SD_CMD_SWITCH_FUNC              6
90 #define SD_CMD_SEND_IF_COND             8
91 #define SD_CMD_SWITCH_UHS18V            11
92
93 #define SD_CMD_APP_SET_BUS_WIDTH        6
94 #define SD_CMD_ERASE_WR_BLK_START       32
95 #define SD_CMD_ERASE_WR_BLK_END         33
96 #define SD_CMD_APP_SEND_OP_COND         41
97 #define SD_CMD_APP_SEND_SCR             51
98
99 /* SCR definitions in different words */
100 #define SD_HIGHSPEED_BUSY       0x00020000
101 #define SD_HIGHSPEED_SUPPORTED  0x00020000
102
103 #define OCR_BUSY                0x80000000
104 #define OCR_HCS                 0x40000000
105 #define OCR_VOLTAGE_MASK        0x007FFF80
106 #define OCR_ACCESS_MODE         0x60000000
107
108 #define SECURE_ERASE            0x80000000
109
110 #define MMC_STATUS_MASK         (~0x0206BF7F)
111 #define MMC_STATUS_SWITCH_ERROR (1 << 7)
112 #define MMC_STATUS_RDY_FOR_DATA (1 << 8)
113 #define MMC_STATUS_CURR_STATE   (0xf << 9)
114 #define MMC_STATUS_ERROR        (1 << 19)
115
116 #define MMC_STATE_PRG           (7 << 9)
117
118 #define MMC_VDD_165_195         0x00000080      /* VDD voltage 1.65 - 1.95 */
119 #define MMC_VDD_20_21           0x00000100      /* VDD voltage 2.0 ~ 2.1 */
120 #define MMC_VDD_21_22           0x00000200      /* VDD voltage 2.1 ~ 2.2 */
121 #define MMC_VDD_22_23           0x00000400      /* VDD voltage 2.2 ~ 2.3 */
122 #define MMC_VDD_23_24           0x00000800      /* VDD voltage 2.3 ~ 2.4 */
123 #define MMC_VDD_24_25           0x00001000      /* VDD voltage 2.4 ~ 2.5 */
124 #define MMC_VDD_25_26           0x00002000      /* VDD voltage 2.5 ~ 2.6 */
125 #define MMC_VDD_26_27           0x00004000      /* VDD voltage 2.6 ~ 2.7 */
126 #define MMC_VDD_27_28           0x00008000      /* VDD voltage 2.7 ~ 2.8 */
127 #define MMC_VDD_28_29           0x00010000      /* VDD voltage 2.8 ~ 2.9 */
128 #define MMC_VDD_29_30           0x00020000      /* VDD voltage 2.9 ~ 3.0 */
129 #define MMC_VDD_30_31           0x00040000      /* VDD voltage 3.0 ~ 3.1 */
130 #define MMC_VDD_31_32           0x00080000      /* VDD voltage 3.1 ~ 3.2 */
131 #define MMC_VDD_32_33           0x00100000      /* VDD voltage 3.2 ~ 3.3 */
132 #define MMC_VDD_33_34           0x00200000      /* VDD voltage 3.3 ~ 3.4 */
133 #define MMC_VDD_34_35           0x00400000      /* VDD voltage 3.4 ~ 3.5 */
134 #define MMC_VDD_35_36           0x00800000      /* VDD voltage 3.5 ~ 3.6 */
135
136 #define MMC_SWITCH_MODE_CMD_SET         0x00 /* Change the command set */
137 #define MMC_SWITCH_MODE_SET_BITS        0x01 /* Set bits in EXT_CSD byte
138                                                 addressed by index which are
139                                                 1 in value field */
140 #define MMC_SWITCH_MODE_CLEAR_BITS      0x02 /* Clear bits in EXT_CSD byte
141                                                 addressed by index, which are
142                                                 1 in value field */
143 #define MMC_SWITCH_MODE_WRITE_BYTE      0x03 /* Set target byte to value */
144
145 #define SD_SWITCH_CHECK         0
146 #define SD_SWITCH_SWITCH        1
147
148 /*
149  * EXT_CSD fields
150  */
151 #define EXT_CSD_ENH_START_ADDR          136     /* R/W */
152 #define EXT_CSD_ENH_SIZE_MULT           140     /* R/W */
153 #define EXT_CSD_GP_SIZE_MULT            143     /* R/W */
154 #define EXT_CSD_PARTITION_SETTING       155     /* R/W */
155 #define EXT_CSD_PARTITIONS_ATTRIBUTE    156     /* R/W */
156 #define EXT_CSD_MAX_ENH_SIZE_MULT       157     /* R */
157 #define EXT_CSD_PARTITIONING_SUPPORT    160     /* RO */
158 #define EXT_CSD_RST_N_FUNCTION          162     /* R/W */
159 #define EXT_CSD_WR_REL_PARAM            166     /* R */
160 #define EXT_CSD_WR_REL_SET              167     /* R/W */
161 #define EXT_CSD_RPMB_MULT               168     /* RO */
162 #define EXT_CSD_ERASE_GROUP_DEF         175     /* R/W */
163 #define EXT_CSD_BOOT_BUS_WIDTH          177
164 #define EXT_CSD_PART_CONF               179     /* R/W */
165 #define EXT_CSD_BUS_WIDTH               183     /* R/W */
166 #define EXT_CSD_HS_TIMING               185     /* R/W */
167 #define EXT_CSD_REV                     192     /* RO */
168 #define EXT_CSD_CARD_TYPE               196     /* RO */
169 #define EXT_CSD_SEC_CNT                 212     /* RO, 4 bytes */
170 #define EXT_CSD_HC_WP_GRP_SIZE          221     /* RO */
171 #define EXT_CSD_HC_ERASE_GRP_SIZE       224     /* RO */
172 #define EXT_CSD_BOOT_MULT               226     /* RO */
173
174 /*
175  * EXT_CSD field definitions
176  */
177
178 #define EXT_CSD_CMD_SET_NORMAL          (1 << 0)
179 #define EXT_CSD_CMD_SET_SECURE          (1 << 1)
180 #define EXT_CSD_CMD_SET_CPSECURE        (1 << 2)
181
182 #define EXT_CSD_CARD_TYPE_26    (1 << 0)        /* Card can run at 26MHz */
183 #define EXT_CSD_CARD_TYPE_52    (1 << 1)        /* Card can run at 52MHz */
184 #define EXT_CSD_CARD_TYPE_DDR_1_8V      (1 << 2)
185 #define EXT_CSD_CARD_TYPE_DDR_1_2V      (1 << 3)
186 #define EXT_CSD_CARD_TYPE_DDR_52        (EXT_CSD_CARD_TYPE_DDR_1_8V \
187                                         | EXT_CSD_CARD_TYPE_DDR_1_2V)
188
189 #define EXT_CSD_BUS_WIDTH_1     0       /* Card is in 1 bit mode */
190 #define EXT_CSD_BUS_WIDTH_4     1       /* Card is in 4 bit mode */
191 #define EXT_CSD_BUS_WIDTH_8     2       /* Card is in 8 bit mode */
192 #define EXT_CSD_DDR_BUS_WIDTH_4 5       /* Card is in 4 bit DDR mode */
193 #define EXT_CSD_DDR_BUS_WIDTH_8 6       /* Card is in 8 bit DDR mode */
194
195 #define EXT_CSD_BOOT_ACK_ENABLE                 (1 << 6)
196 #define EXT_CSD_BOOT_PARTITION_ENABLE           (1 << 3)
197 #define EXT_CSD_PARTITION_ACCESS_ENABLE         (1 << 0)
198 #define EXT_CSD_PARTITION_ACCESS_DISABLE        (0 << 0)
199
200 #define EXT_CSD_BOOT_ACK(x)             (x << 6)
201 #define EXT_CSD_BOOT_PART_NUM(x)        (x << 3)
202 #define EXT_CSD_PARTITION_ACCESS(x)     (x << 0)
203
204 #define EXT_CSD_BOOT_BUS_WIDTH_MODE(x)  (x << 3)
205 #define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2)
206 #define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x)
207
208 #define EXT_CSD_PARTITION_SETTING_COMPLETED     (1 << 0)
209
210 #define EXT_CSD_ENH_USR         (1 << 0)        /* user data area is enhanced */
211 #define EXT_CSD_ENH_GP(x)       (1 << ((x)+1))  /* GP part (x+1) is enhanced */
212
213 #define EXT_CSD_HS_CTRL_REL     (1 << 0)        /* host controlled WR_REL_SET */
214
215 #define EXT_CSD_WR_DATA_REL_USR         (1 << 0)        /* user data area WR_REL */
216 #define EXT_CSD_WR_DATA_REL_GP(x)       (1 << ((x)+1))  /* GP part (x+1) WR_REL */
217
218 #define R1_ILLEGAL_COMMAND              (1 << 22)
219 #define R1_APP_CMD                      (1 << 5)
220
221 #define MMC_RSP_PRESENT (1 << 0)
222 #define MMC_RSP_136     (1 << 1)                /* 136 bit response */
223 #define MMC_RSP_CRC     (1 << 2)                /* expect valid crc */
224 #define MMC_RSP_BUSY    (1 << 3)                /* card may send busy */
225 #define MMC_RSP_OPCODE  (1 << 4)                /* response contains opcode */
226
227 #define MMC_RSP_NONE    (0)
228 #define MMC_RSP_R1      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
229 #define MMC_RSP_R1b     (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \
230                         MMC_RSP_BUSY)
231 #define MMC_RSP_R2      (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
232 #define MMC_RSP_R3      (MMC_RSP_PRESENT)
233 #define MMC_RSP_R4      (MMC_RSP_PRESENT)
234 #define MMC_RSP_R5      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
235 #define MMC_RSP_R6      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
236 #define MMC_RSP_R7      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
237
238 #define MMCPART_NOAVAILABLE     (0xff)
239 #define PART_ACCESS_MASK        (0x7)
240 #define PART_SUPPORT            (0x1)
241 #define ENHNCD_SUPPORT          (0x2)
242 #define PART_ENH_ATTRIB         (0x1f)
243
244 /* Maximum block size for MMC */
245 #define MMC_MAX_BLOCK_LEN       512
246
247 /* The number of MMC physical partitions.  These consist of:
248  * boot partitions (2), general purpose partitions (4) in MMC v4.4.
249  */
250 #define MMC_NUM_BOOT_PARTITION  2
251 #define MMC_PART_RPMB           3       /* RPMB partition number */
252
253 struct mmc_cid {
254         unsigned long psn;
255         unsigned short oid;
256         unsigned char mid;
257         unsigned char prv;
258         unsigned char mdt;
259         char pnm[7];
260 };
261
262 struct mmc_cmd {
263         ushort cmdidx;
264         uint resp_type;
265         uint cmdarg;
266         uint response[4];
267 };
268
269 struct mmc_data {
270         union {
271                 char *dest;
272                 const char *src; /* src buffers don't get written to */
273         };
274         uint flags;
275         uint blocks;
276         uint blocksize;
277 };
278
279 /* forward decl. */
280 struct mmc;
281
282 struct mmc_ops {
283         int (*send_cmd)(struct mmc *mmc,
284                         struct mmc_cmd *cmd, struct mmc_data *data);
285         void (*set_ios)(struct mmc *mmc);
286         int (*init)(struct mmc *mmc);
287         int (*getcd)(struct mmc *mmc);
288         int (*getwp)(struct mmc *mmc);
289 };
290
291 struct mmc_config {
292         const char *name;
293         const struct mmc_ops *ops;
294         uint host_caps;
295         uint voltages;
296         uint f_min;
297         uint f_max;
298         uint b_max;
299         unsigned char part_type;
300 };
301
302 /* TODO struct mmc should be in mmc_private but it's hard to fix right now */
303 struct mmc {
304         struct list_head link;
305         const struct mmc_config *cfg;   /* provided configuration */
306         uint version;
307         void *priv;
308         uint has_init;
309         int high_capacity;
310         uint bus_width;
311         uint clock;
312         uint card_caps;
313         uint ocr;
314         uint dsr;
315         uint dsr_imp;
316         uint scr[2];
317         uint csd[4];
318         uint cid[4];
319         ushort rca;
320         u8 part_support;
321         u8 part_attr;
322         u8 wr_rel_set;
323         char part_config;
324         char part_num;
325         uint tran_speed;
326         uint read_bl_len;
327         uint write_bl_len;
328         uint erase_grp_size;    /* in 512-byte sectors */
329         uint hc_wp_grp_size;    /* in 512-byte sectors */
330         u64 capacity;
331         u64 capacity_user;
332         u64 capacity_boot;
333         u64 capacity_rpmb;
334         u64 capacity_gp[4];
335         u64 enh_user_start;
336         u64 enh_user_size;
337         block_dev_desc_t block_dev;
338         char op_cond_pending;   /* 1 if we are waiting on an op_cond command */
339         char init_in_progress;  /* 1 if we have done mmc_start_init() */
340         char preinit;           /* start init as early as possible */
341         uint op_cond_response;  /* the response byte from the last op_cond */
342         int ddr_mode;
343 };
344
345 struct mmc_hwpart_conf {
346         struct {
347                 uint enh_start; /* in 512-byte sectors */
348                 uint enh_size;  /* in 512-byte sectors, if 0 no enh area */
349                 unsigned wr_rel_change : 1;
350                 unsigned wr_rel_set : 1;
351         } user;
352         struct {
353                 uint size;      /* in 512-byte sectors */
354                 unsigned enhanced : 1;
355                 unsigned wr_rel_change : 1;
356                 unsigned wr_rel_set : 1;
357         } gp_part[4];
358 };
359
360 enum mmc_hwpart_conf_mode {
361         MMC_HWPART_CONF_CHECK,
362         MMC_HWPART_CONF_SET,
363         MMC_HWPART_CONF_COMPLETE,
364 };
365
366 int mmc_register(struct mmc *mmc);
367 struct mmc *mmc_create(const struct mmc_config *cfg, void *priv);
368 void mmc_destroy(struct mmc *mmc);
369 int mmc_initialize(bd_t *bis);
370 int mmc_init(struct mmc *mmc);
371 int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size);
372 void mmc_set_clock(struct mmc *mmc, uint clock);
373 struct mmc *find_mmc_device(int dev_num);
374 int mmc_set_dev(int dev_num);
375 void print_mmc_devices(char separator);
376 int get_mmc_num(void);
377 int get_mmc_dev_count(void);
378 int mmc_switch_part(int dev_num, unsigned int part_num);
379 int mmc_hwpart_config(struct mmc *mmc, const struct mmc_hwpart_conf *conf,
380                       enum mmc_hwpart_conf_mode mode);
381 int mmc_getcd(struct mmc *mmc);
382 int board_mmc_getcd(struct mmc *mmc);
383 int mmc_getwp(struct mmc *mmc);
384 int board_mmc_getwp(struct mmc *mmc);
385 int mmc_set_dsr(struct mmc *mmc, u16 val);
386 /* Function to change the size of boot partition and rpmb partitions */
387 int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
388                                         unsigned long rpmbsize);
389 /* Function to modify the PARTITION_CONFIG field of EXT_CSD */
390 int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
391 /* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */
392 int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode);
393 /* Function to modify the RST_n_FUNCTION field of EXT_CSD */
394 int mmc_set_rst_n_function(struct mmc *mmc, u8 enable);
395 /* Functions to read / write the RPMB partition */
396 int mmc_rpmb_set_key(struct mmc *mmc, void *key);
397 int mmc_rpmb_get_counter(struct mmc *mmc, unsigned long *counter);
398 int mmc_rpmb_read(struct mmc *mmc, void *addr, unsigned short blk,
399                   unsigned short cnt, unsigned char *key);
400 int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk,
401                    unsigned short cnt, unsigned char *key);
402 /**
403  * Start device initialization and return immediately; it does not block on
404  * polling OCR (operation condition register) status.  Then you should call
405  * mmc_init, which would block on polling OCR status and complete the device
406  * initializatin.
407  *
408  * @param mmc   Pointer to a MMC device struct
409  * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error.
410  */
411 int mmc_start_init(struct mmc *mmc);
412
413 /**
414  * Set preinit flag of mmc device.
415  *
416  * This will cause the device to be pre-inited during mmc_initialize(),
417  * which may save boot time if the device is not accessed until later.
418  * Some eMMC devices take 200-300ms to init, but unfortunately they
419  * must be sent a series of commands to even get them to start preparing
420  * for operation.
421  *
422  * @param mmc           Pointer to a MMC device struct
423  * @param preinit       preinit flag value
424  */
425 void mmc_set_preinit(struct mmc *mmc, int preinit);
426
427 #ifdef CONFIG_GENERIC_MMC
428 #ifdef CONFIG_MMC_SPI
429 #define mmc_host_is_spi(mmc)    ((mmc)->cfg->host_caps & MMC_MODE_SPI)
430 #else
431 #define mmc_host_is_spi(mmc)    0
432 #endif
433 struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
434 #else
435 int mmc_legacy_init(int verbose);
436 #endif
437
438 void board_mmc_power_init(void);
439 int board_mmc_init(bd_t *bis);
440 int cpu_mmc_init(bd_t *bis);
441 int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr);
442
443 struct pci_device_id;
444
445 /**
446  * pci_mmc_init() - set up PCI MMC devices
447  *
448  * This finds all the matching PCI IDs and sets them up as MMC devices.
449  *
450  * @name:               Name to use for devices
451  * @mmc_supported:      PCI IDs to search for
452  * @num_ids:            Number of elements in @mmc_supported
453  */
454 int pci_mmc_init(const char *name, struct pci_device_id *mmc_supported,
455                  int num_ids);
456
457 /* Set block count limit because of 16 bit register limit on some hardware*/
458 #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT
459 #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535
460 #endif
461
462 #endif /* _MMC_H_ */