]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - tools/imximage.c
arm: fixloop(): do not use r8 for relocation
[karo-tx-uboot.git] / tools / imximage.c
1 /*
2  * (C) Copyright 2009
3  * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
4  *
5  * (C) Copyright 2008
6  * Marvell Semiconductor <www.marvell.com>
7  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
8  *
9  * See file CREDITS for list of people who contributed to this
10  * project.
11  *
12  * This program is free software; you can redistribute it and/or
13  * modify it under the terms of the GNU General Public License as
14  * published by the Free Software Foundation; either version 2 of
15  * the License, or (at your option) any later version.
16  *
17  * This program is distributed in the hope that it will be useful,
18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20  * GNU General Public License for more details.
21  *
22  * You should have received a copy of the GNU General Public License
23  * along with this program; if not, write to the Free Software
24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25  * MA 02111-1307 USA
26  */
27
28 /* Required to obtain the getline prototype from stdio.h */
29 #define _GNU_SOURCE
30
31 #include "mkimage.h"
32 #include <image.h>
33 #include "imximage.h"
34
35 /*
36  * Supported commands for configuration file
37  */
38 static table_entry_t imximage_cmds[] = {
39         {CMD_BOOT_FROM,         "BOOT_FROM",            "boot command", },
40         {CMD_DATA,              "DATA",                 "Reg Write Data", },
41         {-1,            "",                     "",     },
42 };
43
44 /*
45  * Supported Boot options for configuration file
46  * this is needed to set the correct flash offset
47  */
48 static table_entry_t imximage_bootops[] = {
49         {FLASH_OFFSET_SPI,      "spi",          "SPI Flash",    },
50         {FLASH_OFFSET_NAND,     "nand",         "NAND Flash",   },
51         {FLASH_OFFSET_SD,       "sd",           "SD Card",      },
52         {FLASH_OFFSET_ONENAND,  "onenand",      "OneNAND Flash",},
53         {-1,                    "",             "Invalid",      },
54 };
55
56
57 static struct imx_header imximage_header;
58
59 static uint32_t get_cfg_value(char *token, char *name,  int linenr)
60 {
61         char *endptr;
62         uint32_t value;
63
64         errno = 0;
65         value = strtoul(token, &endptr, 16);
66         if (errno || (token == endptr)) {
67                 fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n",
68                         name,  linenr, token);
69                 exit(EXIT_FAILURE);
70         }
71         return value;
72 }
73
74 static int imximage_check_image_types(uint8_t type)
75 {
76         if (type == IH_TYPE_IMXIMAGE)
77                 return EXIT_SUCCESS;
78         else
79                 return EXIT_FAILURE;
80 }
81
82 static int imximage_verify_header(unsigned char *ptr, int image_size,
83                         struct mkimage_params *params)
84 {
85
86         struct imx_header *imx_hdr = (struct imx_header *) ptr;
87         flash_header_t *hdr = &imx_hdr->fhdr;
88
89         /* Only a few checks can be done: search for magic numbers */
90         if (hdr->app_code_barker != APP_CODE_BARKER)
91                 return -FDT_ERR_BADSTRUCTURE;
92
93         if (imx_hdr->dcd_table.preamble.barker != DCD_BARKER)
94                 return -FDT_ERR_BADSTRUCTURE;
95
96         return 0;
97 }
98
99 static void imximage_print_header(const void *ptr)
100 {
101         struct imx_header *imx_hdr = (struct imx_header *) ptr;
102         flash_header_t *hdr = &imx_hdr->fhdr;
103         uint32_t size;
104         uint32_t length;
105         dcd_t *dcd = &imx_hdr->dcd_table;
106
107         size = imx_hdr->dcd_table.preamble.length;
108         if (size > (MAX_HW_CFG_SIZE * sizeof(dcd_type_addr_data_t))) {
109                 fprintf(stderr,
110                         "Error: Image corrupt DCD size %d exceed maximum %d\n",
111                         (uint32_t)(size / sizeof(dcd_type_addr_data_t)),
112                         MAX_HW_CFG_SIZE);
113                 exit(EXIT_FAILURE);
114         }
115
116         length =  dcd->preamble.length / sizeof(dcd_type_addr_data_t);
117
118         printf("Image Type:   Freescale IMX Boot Image\n");
119         printf("Data Size:    ");
120         genimg_print_size(dcd->addr_data[length].type);
121         printf("Load Address: %08x\n", (unsigned int)hdr->app_dest_ptr);
122         printf("Entry Point:  %08x\n", (unsigned int)hdr->app_code_jump_vector);
123 }
124
125 static uint32_t imximage_parse_cfg_file(struct imx_header *imxhdr, char *name)
126 {
127         FILE *fd = NULL;
128         char *line = NULL;
129         char *token, *saveptr1, *saveptr2;
130         int lineno = 0;
131         int fld, value;
132         size_t len;
133         int dcd_len = 0;
134         dcd_t *dcd = &imxhdr->dcd_table;
135         int32_t cmd;
136
137         fd = fopen(name, "r");
138         if (fd == 0) {
139                 fprintf(stderr, "Error: %s - Can't open DCD file\n", name);
140                 exit(EXIT_FAILURE);
141         }
142
143         /* Very simple parsing, line starting with # are comments
144          * and are dropped
145          */
146         while ((getline(&line, &len, fd)) > 0) {
147                 lineno++;
148
149                 token = strtok_r(line, "\r\n", &saveptr1);
150                 if (token == NULL)
151                         continue;
152
153                 /* Check inside the single line */
154                 for (fld = CFG_COMMAND, cmd = CMD_INVALID,
155                                 line = token; ; line = NULL, fld++) {
156                         token = strtok_r(line, " \t", &saveptr2);
157                         if (token == NULL)
158                                 break;
159
160                         /* Drop all text starting with '#' as comments */
161                         if (token[0] == '#')
162                                 break;
163
164                         /* parse all fields in a single line */
165                         switch (fld) {
166                         case CFG_COMMAND:
167                                 cmd = get_table_entry_id(imximage_cmds,
168                                         "imximage commands", token);
169                                 if (cmd < 0) {
170                                         fprintf(stderr,
171                                                 "Error: %s[%d] - "
172                                                 "Invalid command (%s)\n",
173                                                 name, lineno, token);
174                                         exit(EXIT_FAILURE);
175                                 }
176                                 break;
177                         case CFG_REG_SIZE:
178                                 switch (cmd) {
179                                 case CMD_BOOT_FROM:
180                                         /* Get flash header offset */
181                                         imxhdr->flash_offset =
182                                                 get_table_entry_id(
183                                                         imximage_bootops,
184                                                         "imximage boot option",
185                                                         token);
186                                         if (imxhdr->flash_offset == -1) {
187                                                 fprintf(stderr,
188                                                         "Error: %s[%d] -"
189                                                         "Invalid boot device"
190                                                         "(%s)\n",
191                                                         name, lineno, token);
192                                                 exit(EXIT_FAILURE);
193                                         }
194                                         break;
195                                 case CMD_DATA:
196                                         value = get_cfg_value(token,
197                                                         name, lineno);
198
199                                         /* Byte, halfword, word */
200                                         if ((value != 1) &&
201                                                 (value != 2) && (value != 4)) {
202                                                 fprintf(stderr,
203                                                         "Error: %s[%d] - "
204                                                         "Invalid register size "
205                                                         "(%d)\n",
206                                                         name, lineno, value);
207                                                 exit(EXIT_FAILURE);
208                                         }
209                                         dcd->addr_data[dcd_len].type = value;
210                                         break;
211                                 }
212
213                         case CFG_REG_ADDRESS:
214                                 if (cmd == CMD_DATA)
215                                         dcd->addr_data[dcd_len].addr =
216                                                 get_cfg_value(token,
217                                                         name, lineno);
218                                 break;
219                         case CFG_REG_VALUE:
220                                 if (cmd == CMD_DATA) {
221                                         dcd->addr_data[dcd_len].value =
222                                                 get_cfg_value(token,
223                                                         name, lineno);
224                                         dcd_len++;
225                                 }
226                                 break;
227                         }
228                 }
229
230                 if (dcd_len > MAX_HW_CFG_SIZE) {
231                         fprintf(stderr,
232                                 "Error: %s[%d] -"
233                                 "DCD table exceeds maximum size(%d)\n",
234                                 name, lineno, MAX_HW_CFG_SIZE);
235                 }
236         }
237         dcd->preamble.barker = DCD_BARKER;
238         dcd->preamble.length = dcd_len * sizeof(dcd_type_addr_data_t);
239         fclose(fd);
240
241         return dcd_len;
242 }
243
244 static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd,
245                                 struct mkimage_params *params)
246 {
247         struct imx_header *hdr = (struct imx_header *)ptr;
248         flash_header_t *fhdr = &hdr->fhdr;
249         int dcd_len;
250         dcd_t *dcd = &hdr->dcd_table;
251         uint32_t base_offset;
252
253         /* Set default offset */
254         hdr->flash_offset = FLASH_OFFSET_STANDARD;
255
256         /* Set magic number */
257         fhdr->app_code_barker = APP_CODE_BARKER;
258
259         /* Parse dcd configuration file */
260         dcd_len = imximage_parse_cfg_file(hdr, params->imagename);
261
262         fhdr->app_dest_ptr = params->addr;
263         fhdr->app_dest_ptr = params->ep - hdr->flash_offset -
264                 sizeof(struct imx_header);
265         fhdr->app_code_jump_vector = params->ep;
266
267         base_offset = fhdr->app_dest_ptr + hdr->flash_offset ;
268         fhdr->dcd_ptr_ptr = (uint32_t) (offsetof(flash_header_t, dcd_ptr) -
269                 offsetof(flash_header_t, app_code_jump_vector) +
270                 base_offset);
271
272         fhdr->dcd_ptr = base_offset +
273                         offsetof(struct imx_header, dcd_table);
274
275         /* The external flash header must be at the end of the DCD table */
276         dcd->addr_data[dcd_len].type = sbuf->st_size +
277                                 hdr->flash_offset +
278                                 sizeof(struct imx_header);
279
280         /* Security feature are not supported */
281         fhdr->app_code_csf = 0;
282         fhdr->super_root_key = 0;
283
284 }
285
286 int imximage_check_params(struct mkimage_params *params)
287 {
288         if (!params)
289                 return CFG_INVALID;
290         if (!strlen(params->imagename)) {
291                 fprintf(stderr, "Error: %s - Configuration file not specified, "
292                         "it is needed for imximage generation\n",
293                         params->cmdname);
294                 return CFG_INVALID;
295         }
296         /*
297          * Check parameters:
298          * XIP is not allowed and verify that incompatible
299          * parameters are not sent at the same time
300          * For example, if list is required a data image must not be provided
301          */
302         return  (params->dflag && (params->fflag || params->lflag)) ||
303                 (params->fflag && (params->dflag || params->lflag)) ||
304                 (params->lflag && (params->dflag || params->fflag)) ||
305                 (params->xflag) || !(strlen(params->imagename));
306 }
307
308 /*
309  * imximage parameters
310  */
311 static struct image_type_params imximage_params = {
312         .name           = "Freescale i.MX 51 Boot Image support",
313         .header_size    = sizeof(struct imx_header),
314         .hdr            = (void *)&imximage_header,
315         .check_image_type = imximage_check_image_types,
316         .verify_header  = imximage_verify_header,
317         .print_header   = imximage_print_header,
318         .set_header     = imximage_set_header,
319         .check_params   = imximage_check_params,
320 };
321
322 void init_imx_image_type(void)
323 {
324         mkimage_register(&imximage_params);
325 }