/*
- * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2011 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
#include <asm/immap_86xx.h>
#include <asm/fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
#include <i2c.h>
#include <asm/io.h>
#include <libfdt.h>
/* Verify if enabled */
tmp_val = 0;
i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
- debug("DVI Encoder Read: 0x%02lx\n",tmp_val);
+ debug("DVI Encoder Read: 0x%02x\n", tmp_val);
tmp_val = 0x10;
i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
/* Verify if enabled */
tmp_val = 0;
i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
- debug("DVI Encoder Read: 0x%02lx\n",tmp_val);
+ debug("DVI Encoder Read: 0x%02x\n", tmp_val);
return 0;
}
volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
u8 *pixis_base = (u8 *)PIXIS_BASE;
- printf ("Board: MPC8610HPCD, System ID: 0x%02x, "
- "System Version: 0x%02x, FPGA Version: 0x%02x\n",
+ printf ("Board: MPC8610HPCD, Sys ID: 0x%02x, "
+ "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
in_8(pixis_base + PIXIS_PVER));
+ /*
+ * The MPC8610 HPCD workbook says that LBMAP=11 is the "normal" boot
+ * bank and LBMAP=00 is the alternate bank. However, the pixis
+ * altbank code can only set bits, not clear them, so we treat 00 as
+ * the normal bank and 11 as the alternate.
+ */
+ switch (in_8(pixis_base + PIXIS_VBOOT) & 0xC0) {
+ case 0:
+ puts("vBank: Standard\n");
+ break;
+ case 0x40:
+ puts("Promjet\n");
+ break;
+ case 0x80:
+ puts("NAND\n");
+ break;
+ case 0xC0:
+ puts("vBank: Alternate\n");
+ break;
+ }
+
mcm->abcr |= 0x00010000; /* 0 */
mcm->hpmr3 = 0x80000008; /* 4c */
mcm->hpmr0 = 0;
setup_ddr_bat(dram_size);
- puts(" DDR: ");
+ debug(" DDR: ");
return dram_size;
}
#endif
-static struct pci_controller pci1_hose = {
-#ifndef CONFIG_PCI_PNP
-config_table:pci_mpc86xxcts_config_table
-#endif
-};
+static struct pci_controller pci1_hose;
#endif /* CONFIG_PCI */
-#ifdef CONFIG_PCIE1
-static struct pci_controller pcie1_hose;
-#endif
-
-#ifdef CONFIG_PCIE2
-static struct pci_controller pcie2_hose;
-#endif
-
void pci_init_board(void)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
volatile ccsr_gur_t *gur = &immap->im_gur;
- struct fsl_pci_info pci_info[3];
- u32 devdisr, pordevsr, io_sel;
- int first_free_busno = 0;
- int num = 0;
-
- int pci_agent, pcie_ep, pcie_configured;
+ struct fsl_pci_info pci_info;
+ u32 devdisr;
+ int first_free_busno;
+ int pci_agent;
devdisr = in_be32(&gur->devdisr);
- pordevsr = in_be32(&gur->pordevsr);
- io_sel = (pordevsr & MPC8610_PORDEVSR_IO_SEL)
- >> MPC8610_PORDEVSR_IO_SEL_SHIFT;
-
- debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
-#ifdef CONFIG_PCIE1
- pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
-
- if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)){
- SET_STD_PCIE_INFO(pci_info[num], 1);
- pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf (" PCIE1 connected to ULI as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
-
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
- &pcie1_hose, first_free_busno);
- } else {
- printf (" PCIE1: disabled\n");
- }
-
- puts("\n");
-#else
- setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCIE1); /* disable */
-#endif
-
-#ifdef CONFIG_PCIE2
- pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
-
- if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)){
- SET_STD_PCIE_INFO(pci_info[num], 2);
- pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
- printf (" PCIE2 connected to Slot as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
- &pcie2_hose, first_free_busno);
- } else {
- printf (" PCIE2: disabled\n");
- }
-
- puts("\n");
-#else
- setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCIE2); /* disable */
-#endif
+ first_free_busno = fsl_pcie_init_board(0);
#ifdef CONFIG_PCI1
if (!(devdisr & MPC86xx_DEVDISR_PCI1)) {
- SET_STD_PCI_INFO(pci_info[num], 1);
- pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
- printf(" PCI connected to PCI slots as %s" \
+ SET_STD_PCI_INFO(pci_info, 1);
+ set_next_law(pci_info.mem_phys,
+ law_size_bits(pci_info.mem_size), pci_info.law);
+ set_next_law(pci_info.io_phys,
+ law_size_bits(pci_info.io_size), pci_info.law);
+
+ pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
+ printf("PCI: connected to PCI slots as %s" \
" (base address %lx)\n",
pci_agent ? "Agent" : "Host",
- pci_info[num].regs);
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ pci_info.regs);
+#ifndef CONFIG_PCI_PNP
+ pci1_hose.config_table = pci_mpc86xxcts_config_table;
+#endif
+ first_free_busno = fsl_pci_init_port(&pci_info,
&pci1_hose, first_free_busno);
} else {
- printf (" PCI: disabled\n");
+ printf("PCI: disabled\n");
}
puts("\n");
#else
setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCI1); /* disable */
#endif
+
+ fsl_pcie_init_board(first_free_busno);
}
#if defined(CONFIG_OF_BOARD_SETUP)
projects / karo-tx-uboot.git / blobdiff