at91: enable USB ethernet for taskit stamp9g20

[karo-tx-uboot.git] / include / configs / astro_mcf5373l.h

diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index d468e498fa49b503294c9367bff0b1debf2a28e7..d875753a6609a66bcae6b49b9e213db5b4b918d1 100644 (file)
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -3,23 +3,7 @@
  *
  * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -33,6 +17,8 @@
 #ifndef _CONFIG_ASTRO_MCF5373L_H
 #define _CONFIG_ASTRO_MCF5373L_H
 
+#include <linux/stringify.h>
+
 /*
  * set the card type to actually compile for; either of
  * the possibilities listed below has to be used!
@@ -105,7 +91,6 @@
 #define CONFIG_CMDLINE_EDITING
 
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
 #define CONFIG_MCFRTC
 #undef RTC_DEBUG
@@ -115,21 +100,18 @@
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C                        /* I2C with hw support */
-#undef CONFIG_SOFT_I2C                 /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED           80000
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_OFFSET          0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       80000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x58000
 #define CONFIG_SYS_IMMR                        CONFIG_SYS_MBAR
 
 /*
  * Defines processor clock - important for correct timings concerning serial
  * interface etc.
- * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms
  */
 
-#define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_CLK                 80000000
 #define CONFIG_SYS_CPU_CLK             (CONFIG_SYS_CLK * 3)
 #define CONFIG_SYS_SDRAM_SIZE          32              /* SDRAM size in MB */
@@ -147,7 +129,6 @@
  */
 
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
 
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (2)
@@ -211,12 +192,9 @@
  * u-boot: 'set' command
  */
 
-#define _QUOTEME(x)    #x
-#define QUOTEME(x)     _QUOTEME(x)
-
 #define CONFIG_EXTRA_ENV_SETTINGS                      \
        "loaderversion=11\0"                            \
-       "card_id="QUOTEME(ASTRO_ID)"\0"                 \
+       "card_id="__stringify(ASTRO_ID)"\0"                     \
        "alterafile=0\0"                                \
        "xilinxfile=0\0"                                \
        "xilinxload=imxtract 0x540000 $xilinxfile 0x41000000&&"\