at91: enable USB ethernet for taskit stamp9g20

[karo-tx-uboot.git] / include / configs / bf533-stamp.h

diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index 03bc811036fa1eb3a56c6fb4cd4063e7aa0b7fb6..d82c5b203dcc5b8a353a27b47f8d03052d81c587 100644 (file)
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -11,9 +11,9 @@
 /*
  * Processor Settings
  */
+#define CONFIG_BFIN_CPU             bf533-0.3
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
-
 /*
  * Clock Settings
  *     CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
@@ -37,7 +37,6 @@
 /* Values can range from 1-15                                          */
 #define CONFIG_SCLK_DIV                        6 /* note: 1.2 boards can go faster */
 
-
 /*
  * Memory Settings
  */
@@ -59,7 +58,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK       1
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111        1
 #define CONFIG_SMC91111_BASE   0x20300300
 #define SMC91111_EEPROM_INIT() \
@@ -74,6 +72,17 @@
 /* #define CONFIG_ETHADDR      02:80:ad:20:31:b8 */
 
 
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED      50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define CONFIG_SOFT_I2C_GPIO_SCL       GPIO_PF3
+#define CONFIG_SOFT_I2C_GPIO_SDA       GPIO_PF2
+
 /*
  * Flash Settings
  */
@@ -84,7 +93,6 @@
 #define CONFIG_SYS_MAX_FLASH_BANKS     1
 #define CONFIG_SYS_MAX_FLASH_SECT      67
 
-
 /*
  * SPI Settings
  */
@@ -122,23 +130,25 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-       arch/blackfin/cpu/traps.o               (.text .text.*); \
-       arch/blackfin/cpu/interrupt.o   (.text .text.*); \
-       arch/blackfin/cpu/serial.o              (.text .text.*); \
-       common/dlmalloc.o               (.text .text.*); \
-       lib/crc32.o             (.text .text.*); \
+       arch/blackfin/lib/built-in.o (.text*); \
+       arch/blackfin/cpu/built-in.o (.text*); \
        . = DEFINED(env_offset) ? env_offset : .; \
-       common/env_embedded.o           (.text .text.*);
+       common/env_embedded.o (.text*);
 #endif
 
 
 /*
  * I2C Settings
  */
-#define CONFIG_SOFT_I2C
+#define CONFIG_SYS_I2C_SOFT
+#ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF3
 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF2
-
+#define I2C_DELAY              udelay(5)       /* 1/4 I2C clock duration */
+#define CONFIG_SYS_I2C_SOFT_SPEED      50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0
+#endif
 
 /*
  * Compact Flash / IDE / ATA Settings
@@ -175,6 +185,7 @@
  */
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE    0
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
 
 /* FLASH/ETHERNET uses the same async bank */
 #define SHARED_RESOURCES       1