at91: enable USB ethernet for taskit stamp9g20

[karo-tx-uboot.git] / include / configs / sacsng.h

diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index 32e0444a2fb197c0d8873ee58385ed743a6d3af2..0a694fb1bedb1fdc6c876ca1d51754efa9f3abbe 100644 (file)
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -10,26 +10,9 @@
  * Advent Networks, Inc. <http://www.adventnetworks.com>
  * Jay Monkman <jtm@smoothsmoothie.com>
  *
- * Configuration settings for the WindRiver SBC8260 board.
- *     See http://www.windriver.com/products/html/sbc8260.html
+ * Configuration settings for the SACSng 8260 board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -204,7 +187,7 @@
  *  - RX clk is CLK11
  *  - TX clk is CLK12
  */
-# define CONFIG_SYS_CMXSCR_VALUE       (CMXSCR_RS1CS_CLK11  | CMXSCR_TS1CS_CLK12)
+# define CONFIG_SYS_CMXSCR_VALUE1      (CMXSCR_RS1CS_CLK11  | CMXSCR_TS1CS_CLK12)
 
 #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
 
@@ -214,8 +197,8 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK        (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE       (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CMXFCR_MASK2       (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE2      (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
 # define CONFIG_SYS_CPMFCR_RAMTYPE     0
 # define CONFIG_SYS_FCC_PSMR           (FCC_PSMR_FDE | FCC_PSMR_LPB)
 
@@ -297,15 +280,13 @@
  * If the software driver is chosen, there are some additional
  * configuration items that the driver uses to drive the port pins.
  */
-#undef  CONFIG_HARD_I2C                        /* I2C with hardware support    */
-#define CONFIG_SOFT_I2C                1       /* I2C bit-banged               */
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SOFT_SPEED      400000
+#define CONFIG_SYS_I2C_SOFT_SLAVE      0x7F
 /*
  * Software (bit-bang) I2C driver configuration
  */
-#ifdef CONFIG_SOFT_I2C
 #define I2C_PORT       3               /* Port A=0, B=1, C=2, D=3 */
 #define I2C_ACTIVE     (iop->pdir |=  0x00010000)
 #define I2C_TRISTATE   (iop->pdir &= ~0x00010000)
@@ -315,7 +296,6 @@
 #define I2C_SCL(bit)   if(bit) iop->pdat |=  0x00020000; \
                        else    iop->pdat &= ~0x00020000
 #define I2C_DELAY      udelay(20)      /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
 
 /* Define this to reserve an entire FLASH sector for
  * environment variables. Otherwise, the environment will be
@@ -325,7 +305,7 @@
 #define CONFIG_ENV_IN_OWN_SECT 1
 
 /* Define this to contain any number of null terminated strings that
- * will be part of the default enviroment compiled into the boot image.
+ * will be part of the default environment compiled into the boot image.
  */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 "quiet=0\0" \
@@ -495,11 +475,9 @@
 #define CONFIG_SYS_LONGHELP
 
 /* Monitor Command Prompt */
-#define CONFIG_SYS_PROMPT              "=> "
 
 #undef  CONFIG_SYS_HUSH_PARSER
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #endif
 
 /* When CONFIG_TIMESTAMP is selected, the timestamp (date and time)
@@ -546,8 +524,6 @@
  *
  *****************************************************************************/
 
-#define CONFIG_MPC8260         1       /* This is an MPC8260 CPU   */
-#define CONFIG_SBC8260         1       /* on an EST SBC8260 Board  */
 #define CONFIG_SACSng          1       /* munged for the SACSng */
 #define CONFIG_CPM2            1       /* Has a CPM2 */
 
@@ -606,7 +582,6 @@
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size     */
 
 #define CONFIG_SYS_LOAD_ADDR           0x400000   /* default load address */
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
 
 #define CONFIG_SYS_ALT_MEMTEST                 /* Select full-featured memory test */
 #define CONFIG_SYS_MEMTEST_START       0x2000  /* memtest works from the end of */
@@ -622,9 +597,6 @@
 #define CONFIG_SYS_MEMTEST_END         ( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
                                - CONFIG_SYS_MEM_END_USAGE )
 
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)