Peter Tyser <ptyser@xes-inc.com>
- XPEDITE1000 PPC440GX
- XPEDITE5170 MPC8640
- XPEDITE5200 MPC8548
- XPEDITE5370 MPC8572
+ xpedite1000 PPC440GX
+ xpedite5170 MPC8640
+ xpedite5200 MPC8548
+ xpedite5370 MPC8572
+ xpedite5500 P2020
David Updegraff <dave@cray.com>
## SH Systems
#########################################################################
-LIST_sh2=" \
- rsk7203 \
-"
-LIST_sh3=" \
- mpr2 \
- ms7720se \
-"
+LIST_sh2="$(boards_by_cpu sh2)"
+LIST_sh3="$(boards_by_cpu sh3)"
+LIST_sh4="$(boards_by_cpu sh4)"
-LIST_sh4=" \
- ms7750se \
- ms7722se \
- MigoR \
- r7780mp \
- r2dplus \
- sh7763rdp \
- sh7785lcr \
- ap325rxa \
- espt \
-"
-
-LIST_sh=" \
- ${LIST_sh2} \
- ${LIST_sh3} \
- ${LIST_sh4} \
-"
+LIST_sh="$(boards_by_arch sh)"
#########################################################################
## SPARC Systems
@$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \
bf527-ezkit blackfin blackfin bf527-ezkit
-#========================================================================
-# SH3 (SuperH)
-#========================================================================
-
-#########################################################################
-## sh2 (Renesas SuperH)
-#########################################################################
-rsk7203_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $@ sh sh2 rsk7203 renesas
-
-#########################################################################
-## sh3 (Renesas SuperH)
-#########################################################################
-
-mpr2_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $@ sh sh3 mpr2
-
-ms7720se_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $@ sh sh3 ms7720se
-
-#########################################################################
-## sh4 (Renesas SuperH)
-#########################################################################
-
-MigoR_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $@ sh sh4 MigoR renesas
-
-ms7750se_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $@ sh sh4 ms7750se
-
-ms7722se_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $@ sh sh4 ms7722se
-
-r2dplus_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $@ sh sh4 r2dplus renesas
-
-r7780mp_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $@ sh sh4 r7780mp renesas
-
-sh7763rdp_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $@ sh sh4 sh7763rdp renesas
-
-sh7785lcr_32bit_config \
-sh7785lcr_config : unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)board/renesas/sh7785lcr
- @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
- @if [ "$(findstring 32bit, $@)" ] ; then \
- echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0x8ff80000" > \
- $(obj)board/renesas/sh7785lcr/config.tmp ; \
- fi
- @$(MKCONFIG) -n $@ -a sh7785lcr sh sh4 sh7785lcr renesas
-
-ap325rxa_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $@ sh sh4 ap325rxa renesas
-
-espt_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $@ sh sh4 espt
-
#########################################################################
#########################################################################
#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0
#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x7
+/* Define the bits in register CCDR */
+#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17)
+
+/* Define the bits in register CCGRx */
+#define MXC_CCM_CCGR_CG_MASK 0x3
+
+#define MXC_CCM_CCGR5_CG5_OFFSET 10
+
+/* Define the bits in register CLPCR */
+#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18)
+
#endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
endif
PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__
-PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE)
+PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(CONFIG_SYS_TEXT_BASE)
LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds
}
#endif
+#define MOUNT_ROOT_RDONLY 0x000
+#define RAMDISK_FLAGS 0x004
+#define ORIG_ROOT_DEV 0x008
+#define LOADER_TYPE 0x00c
+#define INITRD_START 0x010
+#define INITRD_SIZE 0x014
+#define COMMAND_LINE 0x100
+
+#define RD_PROMPT (1<<15)
+#define RD_DOLOAD (1<<14)
+#define CMD_ARG_RD_PROMPT "prompt_ramdisk="
+#define CMD_ARG_RD_DOLOAD "load_ramdisk="
+
+#ifdef CONFIG_SH_SDRAM_OFFSET
+#define GET_INITRD_START(initrd, linux) (initrd - linux + CONFIG_SH_SDRAM_OFFSET)
+#else
+#define GET_INITRD_START(initrd, linux) (initrd - linux)
+#endif
+
+static void set_sh_linux_param(unsigned long param_addr, unsigned long data)
+{
+ *(unsigned long *)(param_addr) = data;
+}
+
+static unsigned long sh_check_cmd_arg(char *cmdline, char *key, int base)
+{
+ unsigned long val = 0;
+ char *p = strstr(cmdline, key);
+ if (p) {
+ p += strlen(key);
+ val = simple_strtol(p, NULL, base);
+ }
+ return val;
+}
+
int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images)
{
/* Linux kernel load address */
unsigned char *param
= (unsigned char *)image_get_load(images->legacy_hdr_os);
/* Linux kernel command line */
- char *cmdline = (char *)param + 0x100;
+ char *cmdline = (char *)param + COMMAND_LINE;
/* PAGE_SIZE */
unsigned long size = images->ep - (unsigned long)param;
char *bootargs = getenv("bootargs");
/* Setup parameters */
memset(param, 0, size); /* Clear zero page */
+
+ /* Set commandline */
strcpy(cmdline, bootargs);
+ sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10);
+ /* Initrd */
+ if (images->rd_start || images->rd_end) {
+ unsigned long ramdisk_flags = 0;
+ int val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_PROMPT, 10);
+ if (val == 1)
+ ramdisk_flags |= RD_PROMPT;
+ else
+ ramdisk_flags &= ~RD_PROMPT;
+
+ val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10);
+ if (val == 1)
+ ramdisk_flags |= RD_DOLOAD;
+ else
+ ramdisk_flags &= ~RD_DOLOAD;
+
+ set_sh_linux_param((unsigned long)param + MOUNT_ROOT_RDONLY, 0x0001);
+ set_sh_linux_param((unsigned long)param + RAMDISK_FLAGS, ramdisk_flags);
+ set_sh_linux_param((unsigned long)param + ORIG_ROOT_DEV, 0x0200);
+ set_sh_linux_param((unsigned long)param + LOADER_TYPE, 0x0001);
+ set_sh_linux_param((unsigned long)param + INITRD_START,
+ GET_INITRD_START(images->rd_start, CONFIG_SYS_SDRAM_BASE));
+ set_sh_linux_param((unsigned long)param + INITRD_SIZE,
+ images->rd_end - images->rd_start);
+ }
+
+ /* Boot kernel */
kernel();
/* does not return */
static u8 display_putc_pos;
static u8 display_out_pos;
-static u8 display_dot_enable;
-
void display_set(int cmd) {
if (cmd & DISPLAY_CLEAR) {
if (cmd & DISPLAY_HOME) {
display_putc_pos = 0;
}
-
- if (cmd & DISPLAY_MARK) {
- display_dot_enable = 1;
- } else {
- display_dot_enable = 0;
- }
}
#define SEG_A (1<<0)
* A..Z index 10..35
* - index 36
* _ index 37
+ * . index 38
*/
#define SYMBOL_DASH (36)
#define SYMBOL_UNDERLINE (37)
+#define SYMBOL_DOT (38)
static u8 display_char2seg7_tbl[]=
{
SEG_B | SEG_C | SEG_D | SEG_E | SEG_G, /* d */
SEG_A | SEG_D | SEG_E | SEG_F | SEG_G, /* E */
SEG_A | SEG_E | SEG_F | SEG_G, /* F */
- SEG_A | SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* g */
+ 0, /* g - not displayed */
SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* H */
- SEG_E | SEG_F, /* I */
- SEG_B | SEG_C | SEG_D | SEG_E, /* J */
- SEG_A, /* K - special 1 */
+ SEG_B | SEG_C, /* I */
+ 0, /* J - not displayed */
+ 0, /* K - not displayed */
SEG_D | SEG_E | SEG_F, /* L */
- SEG_B, /* m - special 2 */
- SEG_C | SEG_E | SEG_G, /* n */
- SEG_C | SEG_D | SEG_E | SEG_G, /* o */
+ 0, /* m - not displayed */
+ 0, /* n - not displayed */
+ SEG_A | SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* O */
SEG_A | SEG_B | SEG_E | SEG_F | SEG_G, /* P */
- SEG_A | SEG_B | SEG_C | SEG_F | SEG_G, /* q */
- SEG_E | SEG_G, /* r */
+ 0, /* q - not displayed */
+ 0, /* r - not displayed */
SEG_A | SEG_C | SEG_D | SEG_F | SEG_G, /* S */
SEG_D | SEG_E | SEG_F | SEG_G, /* t */
SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* U */
- SEG_C | SEG_D | SEG_E | SEG_F, /* V */
- SEG_C, /* w - special 3 */
- SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* X */
+ 0, /* V - not displayed */
+ 0, /* w - not displayed */
+ 0, /* X - not displayed */
SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* Y */
- SEG_A | SEG_B | SEG_D | SEG_E | SEG_G, /* Z */
+ 0, /* Z - not displayed */
SEG_G, /* - */
- SEG_D /* _ */
+ SEG_D, /* _ */
+ SEG_P /* . */
};
/* Convert char to the LED segments representation */
c -= 'A' - 10;
else if (c == '-')
c = SYMBOL_DASH;
- else if ((c == '_') || (c == '.'))
+ else if (c == '_')
c = SYMBOL_UNDERLINE;
+ else if (c == '.')
+ c = SYMBOL_DOT;
else
c = ' '; /* display unsupported symbols as space */
if (c != ' ')
val = display_char2seg7_tbl[(int)c];
- /* Handle DP LED here */
- if (display_dot_enable) {
- val |= SEG_P;
- }
-
return val;
}
-static inline int display_putc_nomark(char c)
+int display_putc(char c)
{
if (display_putc_pos >= DISPLAY_BUF_SIZE)
return -1;
return c;
}
-int display_putc(char c)
-{
- /* Mark the codes from the "display" command with the DP LED */
- display_set(DISPLAY_MARK);
- return display_putc_nomark(c);
-}
-
/*
* Flush current symbol to the LED display hardware
*/
if (a4m072_status2code(status, buf) < 0)
return;
- display_set(0); /* Clear DP Led */
- display_putc_nomark(buf[0]);
- display_putc_nomark(buf[1]);
+ display_putc(buf[0]);
+ display_putc(buf[1]);
display_set(DISPLAY_HOME);
display_out_pos = 0; /* reset output position */
#
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef CONFIG_SYS_TEXT_BASE
+ifdef CONFIG_SH_32BIT
+CONFIG_SYS_TEXT_BASE = 0x8FF80000
+else
CONFIG_SYS_TEXT_BASE = 0x0ff80000
endif
#include <fsl_esdhc.h>
#include <fsl_pmic.h>
#include <mc13892.h>
+#include <linux/fb.h>
DECLARE_GLOBAL_DATA_PTR;
static u32 system_rev;
+extern int mx51_fb_init(struct fb_videomode *mode);
+
#ifdef CONFIG_HW_WATCHDOG
#include <watchdog.h>
+static struct fb_videomode nec_nl6448bc26_09c = {
+ "NEC_NL6448BC26-09C",
+ 60, /* Refresh */
+ 640, /* xres */
+ 480, /* yres */
+ 37650, /* pixclock = 26.56Mhz */
+ 48, /* left margin */
+ 16, /* right margin */
+ 31, /* upper margin */
+ 12, /* lower margin */
+ 96, /* hsync-len */
+ 2, /* vsync-len */
+ 0, /* sync */
+ FB_VMODE_NONINTERLACED, /* vmode */
+ 0, /* flag */
+};
+
void hw_watchdog_reset(void)
{
int val;
mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3);
mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x82);
+ /* PWM Output GPIO1_2 */
+ mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT1);
+
/*
* Set GPIO1_4 to high and output; it is used to reset
* the system on reboot
return 0;
}
+static void backlight(int on)
+{
+ if (on) {
+ mxc_gpio_set(65, 1);
+ udelay(10000);
+ mxc_gpio_set(68, 1);
+ } else {
+ mxc_gpio_set(65, 0);
+ mxc_gpio_set(68, 0);
+ }
+}
+
+void lcd_enable(void)
+{
+ int ret;
+
+ mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0);
+
+ mxc_gpio_set(2, 1);
+ mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0);
+
+ ret = mx51_fb_init(&nec_nl6448bc26_09c);
+ if (ret)
+ puts("LCD cannot be configured\n");
+}
+
int board_init(void)
{
#ifdef CONFIG_SYS_ARM_WITHOUT_RELOC
return 0;
}
+int do_vision_lcd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int on;
+
+ if (argc < 2)
+ return cmd_usage(cmdtp);
+
+ on = (strcmp(argv[1], "on") == 0);
+ backlight(on);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ lcdbl, CONFIG_SYS_MAXARGS, 1, do_vision_lcd,
+ "Vision2 Backlight",
+ "lcdbl [on|off]\n"
+);
COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_8xxx_pci.o
COBJS-$(CONFIG_MPC8572) += fsl_8xxx_clk.o
COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o
+COBJS-$(CONFIG_P2020) += fsl_8xxx_clk.o
COBJS-$(CONFIG_FSL_DDR2) += fsl_8xxx_ddr.o
+COBJS-$(CONFIG_FSL_DDR3) += fsl_8xxx_ddr.o
+COBJS-$(CONFIG_MPC85xx) += fsl_8xxx_misc.o board.o
+COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_misc.o board.o
COBJS-$(CONFIG_NAND_ACTL) += actl_nand.o
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
--- /dev/null
+/*
+ * Copyright 2009 Extreme Engineering Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include "fsl_8xxx_misc.h"
+
+int checkboard(void)
+{
+ char name[] = CONFIG_SYS_BOARD_NAME;
+ char *s;
+
+#ifdef CONFIG_SYS_FORM_CUSTOM
+ s = "Custom";
+#elif CONFIG_SYS_FORM_6U_CPCI
+ s = "6U CompactPCI";
+#elif CONFIG_SYS_FORM_ATCA_PMC
+ s = "ATCA w/PMC";
+#elif CONFIG_SYS_FORM_ATCA_AMC
+ s = "ATCA w/AMC";
+#elif CONFIG_SYS_FORM_VME
+ s = "VME";
+#elif CONFIG_SYS_FORM_6U_VPX
+ s = "6U VPX";
+#elif CONFIG_SYS_FORM_PMC
+ s = "PMC";
+#elif CONFIG_SYS_FORM_PCI
+ s = "PCI";
+#elif CONFIG_SYS_FORM_3U_CPCI
+ s = "3U CompactPCI";
+#elif CONFIG_SYS_FORM_AMC
+ s = "AdvancedMC";
+#elif CONFIG_SYS_FORM_XMC
+ s = "XMC";
+#elif CONFIG_SYS_FORM_PMC_XMC
+ s = "PMC/XMC";
+#elif CONFIG_SYS_FORM_PCI_EXPRESS
+ s = "PCI Express";
+#elif CONFIG_SYS_FORM_3U_VPX
+ s = "3U VPX";
+#else
+#error "Form factor not defined"
+#endif
+
+ name[strlen(name) - 1] += get_board_derivative();
+ printf("Board: X-ES %s %s SBC\n", name, s);
+
+ /* Display board specific information */
+ puts(" ");
+ if ((s = getenv("board_rev")))
+ printf("Rev %s, ", s);
+ if ((s = getenv("serial#")))
+ printf("Serial# %s, ", s);
+ if ((s = getenv("board_cfg")))
+ printf("Cfg %s", s);
+ puts("\n");
+
+ return 0;
+}
if (in_be32(&gur->gpporcr) & 0x10000)
return 66666666;
else
+#ifdef CONFIG_P2020
+ return 100000000;
+#else
return 50000000;
+#endif
}
#ifdef CONFIG_MPC85xx
if (ddr_ratio == 0x7)
return get_board_sys_clk(dummy);
+#ifdef CONFIG_P2020
+ if (in_be32(&gur->gpporcr) & 0x20000)
+ return 66666666;
+ else
+ return 100000000;
+#else
return 66666666;
+#endif
}
#endif
--- /dev/null
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+#ifdef CONFIG_PCA953X
+#include <pca953x.h>
+
+/*
+ * Determine if a board's flashes are write protected
+ */
+int board_flash_wp_on(void)
+{
+ if (pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) &
+ CONFIG_SYS_PCA953X_NVM_WP)
+ return 1;
+
+ return 0;
+}
+#endif
+
+/*
+ * Return a board's derivative model number. For example:
+ * return 2 for the XPedite5372 and return 1 for the XPedite5201.
+ */
+uint get_board_derivative(void)
+{
+#if defined(CONFIG_MPC85xx)
+ volatile ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+#elif defined(CONFIG_MPC86xx)
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_CCSRBAR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+#endif
+
+ /*
+ * The top 4 lines of the local bus address are pulled low/high and
+ * can be read to determine the least significant digit of a board's
+ * model number.
+ */
+ return gur->gpporcr >> 28;
+}
+
+
--- /dev/null
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FSL_8XXX_MISC_H___
+#define __FSL_8XXX_MISC_H___
+
+uint get_board_derivative(void);
+
+#endif /* __FSL_8XXX_MISC_H__ */
#include <pci.h>
#include <asm/fsl_pci.h>
#include <asm/io.h>
+#include <linux/compiler.h>
#include <libfdt.h>
#include <fdt_support.h>
-int first_free_busno = 0;
#ifdef CONFIG_PCI1
static struct pci_controller pci1_hose;
static struct pci_controller pcie3_hose;
#endif
-#ifdef CONFIG_MPC8572
-/* Correlate host/agent POR bits to usable info. Table 4-14 */
-struct host_agent_cfg_t {
- uchar pcie_root[3];
- uchar rio_host;
-} host_agent_cfg[8] = {
- {{0, 0, 0}, 0},
- {{0, 1, 1}, 1},
- {{1, 0, 1}, 0},
- {{1, 1, 0}, 1},
- {{0, 0, 1}, 0},
- {{0, 1, 0}, 1},
- {{1, 0, 0}, 0},
- {{1, 1, 1}, 1}
-};
-
-/* Correlate port width POR bits to usable info. Table 4-15 */
-struct io_port_cfg_t {
- uchar pcie_width[3];
- uchar rio_width;
-} io_port_cfg[16] = {
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 0},
- {{4, 0, 0}, 0},
- {{4, 4, 0}, 0},
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 4},
- {{4, 2, 2}, 0},
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 0},
- {{4, 0, 0}, 4},
- {{4, 0, 0}, 4},
- {{0, 0, 0}, 4},
- {{0, 0, 0}, 4},
- {{8, 0, 0}, 0},
-};
-#elif defined CONFIG_MPC8548
-/* Correlate host/agent POR bits to usable info. Table 4-12 */
-struct host_agent_cfg_t {
- uchar pci_host[2];
- uchar pcie_root[1];
- uchar rio_host;
-} host_agent_cfg[8] = {
- {{1, 1}, {0}, 0},
- {{1, 1}, {1}, 0},
- {{1, 1}, {0}, 1},
- {{0, 0}, {0}, 0}, /* reserved */
- {{0, 1}, {1}, 0},
- {{1, 1}, {1}, 0},
- {{0, 1}, {1}, 1},
- {{1, 1}, {1}, 1}
-};
-
-/* Correlate port width POR bits to usable info. Table 4-13 */
-struct io_port_cfg_t {
- uchar pcie_width[1];
- uchar rio_width;
-} io_port_cfg[8] = {
- {{0}, 0},
- {{0}, 0},
- {{0}, 0},
- {{4}, 4},
- {{4}, 4},
- {{0}, 4},
- {{0}, 4},
- {{8}, 0},
-};
-#elif defined CONFIG_MPC86xx
-/* Correlate host/agent POR bits to usable info. Table 4-17 */
-struct host_agent_cfg_t {
- uchar pcie_root[2];
- uchar rio_host;
-} host_agent_cfg[8] = {
- {{0, 0}, 0},
- {{1, 0}, 1},
- {{0, 1}, 0},
- {{1, 1}, 1}
-};
-
-/* Correlate port width POR bits to usable info. Table 4-16 */
-struct io_port_cfg_t {
- uchar pcie_width[2];
- uchar rio_width;
-} io_port_cfg[16] = {
- {{0, 0}, 0},
- {{0, 0}, 0},
- {{8, 0}, 0},
- {{8, 8}, 0},
- {{0, 0}, 0},
- {{8, 0}, 4},
- {{8, 0}, 4},
- {{8, 0}, 4},
- {{0, 0}, 0},
- {{0, 0}, 4},
- {{0, 0}, 4},
- {{0, 0}, 4},
- {{0, 0}, 0},
- {{0, 0}, 0},
- {{0, 8}, 0},
- {{8, 8}, 0},
-};
-#endif
-
/*
* 85xx and 86xx share naming conventions, but different layout.
* Correlate names to CPU-specific values to share common
void pci_init_board(void)
{
- struct pci_controller *hose;
- volatile ccsr_fsl_pci_t *pci;
- int width;
- int host;
+ struct fsl_pci_info pci_info[3];
+ int first_free_busno = 0;
+ int num = 0;
+ int pcie_ep;
+ __maybe_unused int pcie_configured;
+
#if defined(CONFIG_MPC85xx)
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#elif defined(CONFIG_MPC86xx)
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile ccsr_gur_t *gur = &immap->im_gur;
#endif
- uint devdisr = in_be32(&gur->devdisr);
- uint io_sel = (in_be32(&gur->pordevsr) & MPC8xxx_PORDEVSR_IO_SEL) >>
+ u32 devdisr = in_be32(&gur->devdisr);
+ u32 pordevsr = in_be32(&gur->pordevsr);
+ __maybe_unused uint io_sel = (pordevsr & MPC8xxx_PORDEVSR_IO_SEL) >>
MPC8xxx_PORDEVSR_IO_SEL_SHIFT;
- uint host_agent = (in_be32(&gur->porbmsr) & MPC8xxx_PORBMSR_HA) >>
- MPC8xxx_PORBMSR_HA_SHIFT;
- struct pci_region *r;
#ifdef CONFIG_PCI1
uint pci_spd_norm = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_SPD;
uint pcix = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1;
uint freq = CONFIG_SYS_CLK_FREQ / 1000 / 1000;
- width = 0; /* Silence compiler warning... */
- io_sel &= 0xf; /* Silence compiler warning... */
- pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
- hose = &pci1_hose;
- host = host_agent_cfg[host_agent].pci_host[0];
- r = hose->regions;
-
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+ SET_STD_PCI_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
printf("\n PCI1: %d bit %s, %s %d MHz, %s, %s\n",
pci_32 ? 32 : 64,
pcix ? "PCIX" : "PCI",
pci_spd_norm ? ">=" : "<=",
pcix ? freq * 2 : freq,
- host ? "host" : "agent",
+ pcie_ep ? "agent" : "host",
pci_arb ? "arbiter" : "external-arbiter");
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BASE,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BASE,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- /* Unlock inbound PCI configuration cycles */
- if (!host)
- fsl_pci_config_unlock(hose);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCI1 on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pci1_hose, first_free_busno);
} else {
printf(" PCI1: disabled\n");
}
/* PCI1 not present on MPC8572 */
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1);
#endif
-#ifdef CONFIG_PCIE1
- pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
- hose = &pcie1_hose;
- host = host_agent_cfg[host_agent].pcie_root[0];
- width = io_port_cfg[io_sel].pcie_width[0];
- r = hose->regions;
-
- if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) {
- printf("\n PCIE1 connected as %s (x%d)",
- host ? "Root Complex" : "Endpoint", width);
- if (in_be32(&pci->pme_msg_det)) {
- out_be32(&pci->pme_msg_det, 0xffffffff);
- debug(" with errors. Clearing. Now 0x%08x",
- in_be32(&pci->pme_msg_det));
- }
- printf("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_MEM_BASE,
- CONFIG_SYS_PCIE1_MEM_PHYS,
- CONFIG_SYS_PCIE1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_IO_BASE,
- CONFIG_SYS_PCIE1_IO_PHYS,
- CONFIG_SYS_PCIE1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- /* Unlock inbound PCI configuration cycles */
- if (!host)
- fsl_pci_config_unlock(hose);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCIE1 on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
+#ifdef CONFIG_PCIE1
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+
+ if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) {
+ SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
+ printf(" PCIE1 connected as %s\n",
+ pcie_ep ? "Endpoint" : "Root Complex");
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie1_hose, first_free_busno);
+ } else {
+ printf(" PCIE1: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE1);
#endif /* CONFIG_PCIE1 */
#ifdef CONFIG_PCIE2
- pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
- hose = &pcie2_hose;
- host = host_agent_cfg[host_agent].pcie_root[1];
- width = io_port_cfg[io_sel].pcie_width[1];
- r = hose->regions;
-
- if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) {
- printf("\n PCIE2 connected as %s (x%d)",
- host ? "Root Complex" : "Endpoint", width);
- if (in_be32(&pci->pme_msg_det)) {
- out_be32(&pci->pme_msg_det, 0xffffffff);
- debug(" with errors. Clearing. Now 0x%08x",
- in_be32(&pci->pme_msg_det));
- }
- printf("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_MEM_BASE,
- CONFIG_SYS_PCIE2_MEM_PHYS,
- CONFIG_SYS_PCIE2_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_IO_BASE,
- CONFIG_SYS_PCIE2_IO_PHYS,
- CONFIG_SYS_PCIE2_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- /* Unlock inbound PCI configuration cycles */
- if (!host)
- fsl_pci_config_unlock(hose);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCIE2 on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
+
+ if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) {
+ SET_STD_PCIE_INFO(pci_info[num], 2);
+ pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
+ printf(" PCIE2 connected as %s\n",
+ pcie_ep ? "Endpoint" : "Root Complex");
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie2_hose, first_free_busno);
+ } else {
+ printf(" PCIE2: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE2);
#endif /* CONFIG_PCIE2 */
#ifdef CONFIG_PCIE3
- pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
- hose = &pcie3_hose;
- host = host_agent_cfg[host_agent].pcie_root[2];
- width = io_port_cfg[io_sel].pcie_width[2];
- r = hose->regions;
-
- if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) {
- printf("\n PCIE3 connected as %s (x%d)",
- host ? "Root Complex" : "Endpoint", width);
- if (in_be32(&pci->pme_msg_det)) {
- out_be32(&pci->pme_msg_det, 0xffffffff);
- debug(" with errors. Clearing. Now 0x%08x",
- in_be32(&pci->pme_msg_det));
- }
- printf("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE3_MEM_BASE,
- CONFIG_SYS_PCIE3_MEM_PHYS,
- CONFIG_SYS_PCIE3_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE3_IO_BASE,
- CONFIG_SYS_PCIE3_IO_PHYS,
- CONFIG_SYS_PCIE3_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- /* Unlock inbound PCI configuration cycles */
- if (!host)
- fsl_pci_config_unlock(hose);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCIE3 on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
+
+ if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) {
+ SET_STD_PCIE_INFO(pci_info[num], 3);
+ pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
+ printf(" PCIE3 connected as %s\n",
+ pcie_ep ? "Endpoint" : "Root Complex");
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie3_hose, first_free_busno);
+ } else {
+ printf(" PCIE3: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE3);
#include <asm/io.h>
#include <fdt_support.h>
#include <pca953x.h>
+#include "../common/fsl_8xxx_misc.h"
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_PCI)
extern void ft_board_pci_setup(void *blob, bd_t *bd);
#endif
-int checkboard(void)
-{
- char *s;
-
- printf("Board: X-ES %s 3U VPX SBC\n", CONFIG_SYS_BOARD_NAME);
- printf(" ");
- s = getenv("board_rev");
- if (s)
- printf("Rev %s, ", s);
- s = getenv("serial#");
- if (s)
- printf("Serial# %s, ", s);
- s = getenv("board_cfg");
- if (s)
- printf("Cfg %s", s);
- printf("\n");
-
- return 0;
-}
/*
* Print out which flash was booted from and if booting from the 2nd flash,
* swap flash chip selects to maintain consistent flash numbering/addresses.
extern void ft_board_pci_setup(void *blob, bd_t *bd);
-int checkboard(void)
-{
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
- volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
- char *s;
-
- printf("Board: X-ES %s PMC\n", CONFIG_SYS_BOARD_NAME);
- printf(" ");
- s = getenv("board_rev");
- if (s)
- printf("Rev %s, ", s);
- s = getenv("serial#");
- if (s)
- printf("Serial# %s, ", s);
- s = getenv("board_cfg");
- if (s)
- printf("Cfg %s", s);
- printf("\n");
-
- out_be32(&lbc->ltesr, 0xffffffff); /* Clear LBC error IRQs */
- out_be32(&lbc->lteir, 0xffffffff); /* Enable LBC error IRQs */
- out_be32(&ecm->eedr, 0xffffffff); /* Clear ecm errors */
- out_be32(&ecm->eeer, 0xffffffff); /* Enable ecm errors */
-
- return 0;
-}
-
static void flash_cs_fixup(void)
{
int flash_sel;
extern void ft_board_pci_setup(void *blob, bd_t *bd);
-int checkboard(void)
-{
- char *s;
-
- printf("Board: X-ES %s 3U VPX SBC\n", CONFIG_SYS_BOARD_NAME);
- printf(" ");
- s = getenv("board_rev");
- if (s)
- printf("Rev %s, ", s);
- s = getenv("serial#");
- if (s)
- printf("Serial# %s, ", s);
- s = getenv("board_cfg");
- if (s)
- printf("Cfg %s", s);
- printf("\n");
-
- return 0;
-}
-
static void flash_cs_fixup(void)
{
int flash_sel;
--- /dev/null
+#
+# Copyright 2007-2008 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += $(BOARD).o
+COBJS-y += ddr.o
+COBJS-y += law.o
+COBJS-y += tlb.o
+
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS-y))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Copyright 2010 Extreme Engineering Solutions, Inc.
+ * Copyright 2007-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+
+static void get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address)
+{
+ i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
+ sizeof(ddr3_spd_eeprom_t));
+}
+
+void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd,
+ unsigned int ctrl_num)
+{
+ unsigned int i;
+ unsigned int i2c_address = 0;
+
+ for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+ if (ctrl_num == 0 && i == 0)
+ i2c_address = SPD_EEPROM_ADDRESS1;
+ get_spd(&(ctrl_dimms_spd[i]), i2c_address);
+ }
+}
+
+unsigned int fsl_ddr_get_mem_data_rate(void)
+{
+ return get_ddr_freq(0);
+}
+
+/*
+ * There are traditionally three board-specific SDRAM timing parameters
+ * which must be calculated based on the particular PCB artwork. These are:
+ * 1.) CPO (Read Capture Delay)
+ * - TIMING_CFG_2 register
+ * Source: Calculation based on board trace lengths and
+ * chip-specific internal delays.
+ * 2.) CLK_ADJUST (Clock and Addr/Cmd alignment control)
+ * - DDR_SDRAM_CLK_CNTL register
+ * Source: Signal Integrity Simulations
+ * 3.) 2T Timing on Addr/Ctl
+ * - TIMING_CFG_2 register
+ * Source: Signal Integrity Simulations
+ * Usually only needed with heavy load/very high speed (>DDR2-800)
+ *
+ * ====== XPedite550x DDR3-800 read delay calculations ======
+ *
+ * The P2020 processor provides an autoleveling option. Setting CPO to
+ * 0x1f enables this auto configuration.
+ */
+
+typedef struct {
+ unsigned short datarate_mhz_low;
+ unsigned short datarate_mhz_high;
+ unsigned char clk_adjust;
+ unsigned char cpo;
+} board_specific_parameters_t;
+
+const board_specific_parameters_t board_specific_parameters[][20] = {
+ {
+ /* Controller 0 */
+ {
+ /* DDR3-600/667 */
+ .datarate_mhz_low = 500,
+ .datarate_mhz_high = 750,
+ .clk_adjust = 5,
+ .cpo = 31,
+ },
+ {
+ /* DDR3-800 */
+ .datarate_mhz_low = 750,
+ .datarate_mhz_high = 850,
+ .clk_adjust = 5,
+ .cpo = 31,
+ },
+ },
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ const board_specific_parameters_t *pbsp =
+ &(board_specific_parameters[ctrl_num][0]);
+ u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
+ sizeof(board_specific_parameters[0][0]);
+ u32 i;
+ ulong ddr_freq;
+
+ /*
+ * Set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
+ * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
+ * there are two dimms in the controller, set odt_rd_cfg to 3 and
+ * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
+ */
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (i&1) { /* odd CS */
+ popts->cs_local_opts[i].odt_rd_cfg = 0;
+ popts->cs_local_opts[i].odt_wr_cfg = 0;
+ } else { /* even CS */
+ if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) {
+ popts->cs_local_opts[i].odt_rd_cfg = 0;
+ popts->cs_local_opts[i].odt_wr_cfg = 4;
+ } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
+ popts->cs_local_opts[i].odt_rd_cfg = 3;
+ popts->cs_local_opts[i].odt_wr_cfg = 3;
+ }
+ }
+ }
+
+ /*
+ * Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+ * freqency and n_banks specified in board_specific_parameters table.
+ */
+ ddr_freq = get_ddr_freq(0) / 1000000;
+
+ for (i = 0; i < num_params; i++) {
+ if (ddr_freq >= pbsp->datarate_mhz_low &&
+ ddr_freq <= pbsp->datarate_mhz_high) {
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->cpo_override = pbsp->cpo;
+ popts->twoT_en = 0;
+ }
+ pbsp++;
+ }
+
+ /*
+ * Factors to consider for half-strength driver enable:
+ * - number of DIMMs installed
+ */
+ popts->half_strength_driver_enable = 0;
+
+ /*
+ * Enable on-die termination.
+ * From the Micron Technical Node TN-41-04, RTT_Nom should typically
+ * be 30 to 40 ohms, while RTT_WR should be 120 ohms. Setting RTT_WR
+ * is handled in the Freescale DDR3 driver. Set RTT_Nom here.
+ */
+ popts->rtt_override = 1;
+ popts->rtt_override_value = 3;
+}
+
--- /dev/null
+/*
+ * Copyright 2010 Extreme Engineering Solutions, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+ SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+ SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+#ifdef CONFIG_SYS_PCIE1_MEM_PHYS
+ SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCIE_1),
+ SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
+#endif
+#ifdef CONFIG_SYS_PCIE2_MEM_PHYS
+ SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
+ SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_2),
+#endif
+#ifdef CONFIG_SYS_PCIE3_MEM_PHYS
+ SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_3),
+ SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_3),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
--- /dev/null
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /* W**G* - NOR flashes */
+ /* This will be changed to *I*G* after relocation to RAM. */
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE2, CONFIG_SYS_FLASH_BASE2,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_256M, 1),
+
+ /* *I*G* - CCSRBAR */
+ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_1M, 1),
+
+ /* *I*G* - NAND flash */
+ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_1M, 1),
+
+ /* **M** - Boot page for secondary processors */
+ SET_TLB_ENTRY(1, CONFIG_BPTR_VIRT_ADDR, CONFIG_BPTR_VIRT_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
+ 0, 3, BOOKE_PAGESZ_4K, 1),
+
+#ifdef CONFIG_PCIE1
+ /* *I*G* - PCIe */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_1G, 1),
+#endif
+
+#ifdef CONFIG_PCIE2
+ /* *I*G* - PCIe */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_256M, 1),
+#endif
+
+#ifdef CONFIG_PCIE3
+ /* *I*G* - PCIe */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 6, BOOKE_PAGESZ_256M, 1),
+#endif
+
+#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3)
+ /* *I*G* - PCIe */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 7, BOOKE_PAGESZ_64M, 1),
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
--- /dev/null
+/*
+ * Copyright 2010 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <pca953x.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void ft_board_pci_setup(void *blob, bd_t *bd);
+
+static void flash_cs_fixup(void)
+{
+ int flash_sel;
+
+ /*
+ * Print boot dev and swap flash flash chip selects if booted from 2nd
+ * flash. Swapping chip selects presents user with a common memory
+ * map regardless of which flash was booted from.
+ */
+ flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) &
+ CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS));
+ printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);
+
+ if (flash_sel) {
+ set_lbc_br(0, CONFIG_SYS_BR1_PRELIM);
+ set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);
+
+ set_lbc_br(1, CONFIG_SYS_BR0_PRELIM);
+ set_lbc_or(1, CONFIG_SYS_OR0_PRELIM);
+ }
+}
+
+int board_early_init_r(void)
+{
+ /* Initialize PCA9557 devices */
+ pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0);
+ pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0);
+ pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR2, 0xff, 0);
+ pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR3, 0xff, 0);
+
+ /*
+ * Remap NOR flash region to caching-inhibited
+ * so that flash can be erased/programmed properly.
+ */
+
+ /* Flush d-cache and invalidate i-cache of any FLASH data */
+ flush_dcache();
+ invalidate_icache();
+
+ /* Invalidate existing TLB entry for NOR flash */
+ disable_tlb(0);
+ set_tlb(1, (CONFIG_SYS_FLASH_BASE2 & 0xf0000000),
+ (CONFIG_SYS_FLASH_BASE2 & 0xf0000000),
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_256M, 1);
+
+ flash_cs_fixup();
+
+ return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_PCI
+ ft_board_pci_setup(blob, bd);
+#endif
+ ft_cpu_setup(blob, bd);
+}
+#endif
+
+#ifdef CONFIG_MP
+extern void cpu_mp_lmb_reserve(struct lmb *lmb);
+
+void board_lmb_reserve(struct lmb *lmb)
+{
+ cpu_mp_lmb_reserve(lmb);
+}
+#endif
MPC8544DS powerpc mpc85xx mpc8544ds freescale
MPC8560ADS powerpc mpc85xx mpc8560ads freescale
MPC8568MDS powerpc mpc85xx mpc8568mds freescale
-XPEDITE5200 powerpc mpc85xx xpedite5200 xes
-XPEDITE5370 powerpc mpc85xx xpedite5370 xes
+xpedite520x powerpc mpc85xx - xes
+xpedite537x powerpc mpc85xx - xes
+xpedite550x powerpc mpc85xx - xes
sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540
sbc8540_66 powerpc mpc85xx sbc8560 - - SBC8540
sbc8548_PCI_33 powerpc mpc85xx sbc8548 - - sbc8548:PCI,33
P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020,SDCARD
sbc8641d powerpc mpc86xx
MPC8610HPCD powerpc mpc86xx mpc8610hpcd freescale
-XPEDITE5170 powerpc mpc86xx xpedite5170 xes
+xpedite517x powerpc mpc86xx - xes
MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale - MPC8641HPCN
cogent_mpc8xx powerpc mpc8xx cogent
ESTEEM192E powerpc mpc8xx esteem192e
DASA_SIM powerpc ppc4xx dasa_sim esd
PMC405DE powerpc ppc4xx pmc405de esd
METROBOX powerpc ppc4xx metrobox sandburst
-XPEDITE1000 powerpc ppc4xx xpedite1000 xes
+xpedite1000 powerpc ppc4xx - xes
korat_perm powerpc ppc4xx korat - - korat:KORAT_PERMANENT
haleakala powerpc ppc4xx kilauea amcc - kilauea:HALEAKALA
sycamore powerpc ppc4xx walnut amcc - walnut
davinci_schmoogie arm arm926ejs schmoogie davinci davinci
davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci
bf527-ad7160-eval blackfin blackfin
+rsk7203 sh sh2 rsk7203 renesas -
+mpr2 sh sh3 mpr2 - -
+ms7720se sh sh3 ms7720se - -
+MigoRsh sh4 MigoR renesas -
+ms7750se sh sh4 ms7750se - -
+ms7722se sh sh4 ms7722se - -
+r2dplus sh sh4 r2dplus renesas -
+r7780mp sh sh4 r7780mp renesas -
+sh7763rdp sh sh4 sh7763rdp renesas -
+sh7785lcr sh sh4 sh7785lcr renesas -
+sh7785lcr_32bit sh sh4 sh7785lcr renesas - sh7785lcr:SH_32BIT=1
+ap325rxa sh sh4 ap325rxa renesas -
+espt sh sh4 espt - -
# Target ARCH CPU Board name Vendor SoC Options
###############################################################################################
if ((bdf = get_pci_dev(argv[2])) == -1)
return 1;
break;
+#ifdef CONFIG_CMD_PCI_ENUM
+ case 'e':
+ break;
+#endif
default: /* scan bus */
value = 1; /* short listing */
bdf = 0; /* bus number */
return 0;
case 'd': /* display */
return pci_cfg_display(bdf, addr, size, value);
+#ifdef CONFIG_CMD_PCI_ENUM
+ case 'e':
+ pci_init();
+ return 0;
+#endif
case 'n': /* next */
if (argc < 4)
goto usage;
"list and access PCI Configuration Space",
"[bus] [long]\n"
" - short or long list of PCI devices on bus 'bus'\n"
+#ifdef CONFIG_CMD_PCI_ENUM
+ "pci enum\n"
+ " - re-enumerate PCI buses\n"
+#endif
"pci header b.d.f\n"
" - show header of PCI device 'bus.device.function'\n"
"pci display[.b, .w, .l] b.d.f [address] [# of objects]\n"
/* direction table -- this indicates the direction of the data
* transfer for each command code -- a 1 indicates input
*/
-unsigned char us_direction[256/8] = {
+static const unsigned char us_direction[256/8] = {
0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77,
0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01,
an ORed combination of the following values:
DISPLAY_CLEAR -- clear the display
DISPLAY_HOME -- set the position to the beginning of display
- DISPLAY_MARK -- enable mark (decimal point), if implemented
int display_putc(char c);
2.2.2.1. I2C test
For verifying the I2C bus, a full I2C bus scanning will be performed
-using the i2c_probe() routine. If any I2C device is found, the test
-will be considered as passed, otherwise failed. This particular way
-will be used because it provides the most common method of testing.
-For example, using the internal loopback mode of the CPM I2C
-controller for testing would not work on boards where the software
-I2C driver (also known as bit-banged driver) is used.
+using the i2c_probe() routine. If a board defines
+CONFIG_SYS_POST_I2C_ADDRS the I2C test will pass if all devices
+listed in CONFIG_SYS_POST_I2C_ADDRS are found, and no additional
+devices are detected. If CONFIG_SYS_POST_I2C_ADDRS is not defined
+the test will pass if any I2C device is found.
+
+The CONFIG_SYS_POST_I2C_IGNORES define can be used to list I2C
+devices which may or may not be present when using
+CONFIG_SYS_POST_I2C_ADDRS. The I2C POST test will pass regardless
+if the devices in CONFIG_SYS_POST_I2C_IGNORES are found or not.
+This is useful in cases when I2C devices are optional (eg on a
+daughtercard that may or may not be present) or not critical
+to board operation.
2.2.2.2. Watchdog timer test
phys_addr_t cfi_flash_bank_addr(int i)
__attribute__((weak, alias("__cfi_flash_bank_addr")));
+static unsigned long __cfi_flash_bank_size(int i)
+{
+#ifdef CONFIG_SYS_FLASH_BANKS_SIZES
+ return ((unsigned long [])CONFIG_SYS_FLASH_BANKS_SIZES)[i];
+#else
+ return 0;
+#endif
+}
+unsigned long cfi_flash_bank_size(int i)
+ __attribute__((weak, alias("__cfi_flash_bank_size")));
+
static void __flash_write8(u8 value, void *addr)
{
__raw_writeb(value, addr);
* The following code cannot be run from FLASH!
*
*/
-ulong flash_get_size (phys_addr_t base, int banknum)
+ulong flash_get_size (phys_addr_t base, int banknum, unsigned long max_size)
{
flash_info_t *info = &flash_info[banknum];
int i, j;
debug ("size_ratio %d port %d bits chip %d bits\n",
size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH,
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+ info->size = 1 << qry.dev_size;
+ /* multiply the size by the number of chips */
+ info->size *= size_ratio;
+ if (max_size && (info->size > max_size)) {
+ debug("[truncated from %ldMiB]", info->size >> 20);
+ info->size = max_size;
+ }
debug ("found %d erase regions\n", num_erase_regions);
sect_cnt = 0;
sector = base;
debug ("erase_region_count = %d erase_region_size = %d\n",
erase_region_count, erase_region_size);
for (j = 0; j < erase_region_count; j++) {
+ if (sector - base >= info->size)
+ break;
if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) {
printf("ERROR: too many flash sectors\n");
break;
}
info->sector_count = sect_cnt;
- info->size = 1 << qry.dev_size;
- /* multiply the size by the number of chips */
- info->size *= size_ratio;
info->buffer_size = 1 << le16_to_cpu(qry.max_buf_write_size);
tmp = 1 << qry.block_erase_timeout_typ;
info->erase_blk_tout = tmp *
flash_info[i].flash_id = FLASH_UNKNOWN;
if (!flash_detect_legacy(cfi_flash_bank_addr(i), i))
- flash_get_size(cfi_flash_bank_addr(i), i);
+ flash_get_size(cfi_flash_bank_addr(i), i,
+ cfi_flash_bank_size(i));
size += flash_info[i].size;
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
#ifndef CONFIG_SYS_FLASH_QUIET_TEST
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) addr;
+ /* Reset hose to make sure its in a clean state */
+ memset(hose, 0, sizeof(struct pci_controller));
+
pci_setup_indirect(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
return fsl_is_pci_agent(hose);
*
*/
-static struct pci_controller* hose_head = NULL;
+static struct pci_controller* hose_head;
void pci_register_hose(struct pci_controller* hose)
{
}
#endif /* CONFIG_PCI_BOOTDELAY */
+ hose_head = NULL;
+
/* now call board specific pci_init()... */
pci_init_board();
}
uint32_t result;
do {
result = ehci_readl(ptr);
+ udelay(5);
if (result == ~(uint32_t)0)
return -1;
result &= mask;
if (result == done)
return 0;
- udelay(1);
usec--;
} while (usec > 0);
return -1;
hcor = (struct ehci_hcor *)((uint32_t) hccr +
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+ debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n",
+ (uint32_t)hccr, (uint32_t)hcor,
+ (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
return 0;
}
uint32_t qt_buffer_hi[5]; /* Appendix B */
/* pad struct for 32 byte alignment */
uint32_t unused[3];
-} __attribute__ ((aligned (32)));
+};
/* Queue Head (QH). */
struct QH {
* epinfo - Pointer to EP configuration table
* cnt - Number of entries in the EP conf table.
*/
-void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt)
+void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt)
{
u16 csr;
u16 fifoaddr = 64; /* First 64 bytes of FIFO reserved for EP0 */
/* exported functions */
extern void musb_start(void);
-extern void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt);
+extern void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt);
extern void write_fifo(u8 ep, u32 length, void *fifo_data);
extern void read_fifo(u8 ep, u32 length, void *fifo_data);
#define USB_MSC_BBB_GET_MAX_LUN 0xFE
/* Endpoint configuration information */
-static struct musb_epinfo epinfo[3] = {
+static const struct musb_epinfo epinfo[3] = {
{MUSB_BULK_EP, 1, 512}, /* EP1 - Bluk Out - 512 Bytes */
{MUSB_BULK_EP, 0, 512}, /* EP1 - Bluk In - 512 Bytes */
{MUSB_INTR_EP, 0, 64} /* EP2 - Interrupt IN - 64 Bytes */
static u32 port_status;
/* Device descriptor */
-static u8 root_hub_dev_des[] = {
+static const u8 root_hub_dev_des[] = {
0x12, /* __u8 bLength; */
0x01, /* __u8 bDescriptorType; Device */
0x00, /* __u16 bcdUSB; v1.1 */
};
/* Configuration descriptor */
-static u8 root_hub_config_des[] = {
+static const u8 root_hub_config_des[] = {
0x09, /* __u8 bLength; */
0x02, /* __u8 bDescriptorType; Configuration */
0x19, /* __u16 wTotalLength; */
0xff /* __u8 ep_bInterval; 255 ms */
};
-static unsigned char root_hub_str_index0[] = {
+static const unsigned char root_hub_str_index0[] = {
0x04, /* __u8 bLength; */
0x03, /* __u8 bDescriptorType; String-descriptor */
0x09, /* __u8 lang ID */
0x04, /* __u8 lang ID */
};
-static unsigned char root_hub_str_index1[] = {
+static const unsigned char root_hub_str_index1[] = {
0x1c, /* __u8 bLength; */
0x03, /* __u8 bDescriptorType; String-descriptor */
'M', /* __u8 Unicode */
int len = 0;
int stat = 0;
u32 datab[4];
- u8 *data_buf = (u8 *) datab;
+ const u8 *data_buf = (u8 *) datab;
u16 bmRType_bReq;
u16 wValue;
u16 wIndex;
break;
- case RH_GET_DESCRIPTOR | RH_CLASS:
+ case RH_GET_DESCRIPTOR | RH_CLASS: {
+ u8 *_data_buf = (u8 *) datab;
debug("RH_GET_DESCRIPTOR | RH_CLASS\n");
- data_buf[0] = 0x09; /* min length; */
- data_buf[1] = 0x29;
- data_buf[2] = 0x1; /* 1 port */
- data_buf[3] = 0x01; /* per-port power switching */
- data_buf[3] |= 0x10; /* no overcurrent reporting */
+ _data_buf[0] = 0x09; /* min length; */
+ _data_buf[1] = 0x29;
+ _data_buf[2] = 0x1; /* 1 port */
+ _data_buf[3] = 0x01; /* per-port power switching */
+ _data_buf[3] |= 0x10; /* no overcurrent reporting */
/* Corresponds to data_buf[4-7] */
- data_buf[4] = 0;
- data_buf[5] = 5;
- data_buf[6] = 0;
- data_buf[7] = 0x02;
- data_buf[8] = 0xff;
+ _data_buf[4] = 0;
+ _data_buf[5] = 5;
+ _data_buf[6] = 0;
+ _data_buf[7] = 0x02;
+ _data_buf[8] = 0xff;
len = min_t(unsigned int, leni,
min_t(unsigned int, data_buf[0], wLength));
break;
+ }
case RH_GET_CONFIGURATION:
debug("RH_GET_CONFIGURATION\n");
COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
COBJS-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o videomodes.o
COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o
+COBJS-$(CONFIG_VIDEO_MX5) += mxc_ipuv3_fb.o ipu_common.o ipu_disp.o
COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o
COBJS-$(CONFIG_SED156X) += sed156x.o
COBJS-$(CONFIG_VIDEO_SM501) += sm501.o
--- /dev/null
+/*
+ * Porting to u-boot:
+ *
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de
+ *
+ * Linux IPU driver for MX51:
+ *
+ * (C) Copyright 2005-2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_IPU_H__
+#define __ASM_ARCH_IPU_H__
+
+#include <linux/types.h>
+
+#define IDMA_CHAN_INVALID 0xFF
+#define HIGH_RESOLUTION_WIDTH 1024
+
+struct clk {
+ const char *name;
+ int id;
+ /* Source clock this clk depends on */
+ struct clk *parent;
+ /* Secondary clock to enable/disable with this clock */
+ struct clk *secondary;
+ /* Current clock rate */
+ unsigned long rate;
+ /* Reference count of clock enable/disable */
+ __s8 usecount;
+ /* Register bit position for clock's enable/disable control. */
+ u8 enable_shift;
+ /* Register address for clock's enable/disable control. */
+ void *enable_reg;
+ u32 flags;
+ /*
+ * Function ptr to recalculate the clock's rate based on parent
+ * clock's rate
+ */
+ void (*recalc) (struct clk *);
+ /*
+ * Function ptr to set the clock to a new rate. The rate must match a
+ * supported rate returned from round_rate. Leave blank if clock is not
+ * programmable
+ */
+ int (*set_rate) (struct clk *, unsigned long);
+ /*
+ * Function ptr to round the requested clock rate to the nearest
+ * supported rate that is less than or equal to the requested rate.
+ */
+ unsigned long (*round_rate) (struct clk *, unsigned long);
+ /*
+ * Function ptr to enable the clock. Leave blank if clock can not
+ * be gated.
+ */
+ int (*enable) (struct clk *);
+ /*
+ * Function ptr to disable the clock. Leave blank if clock can not
+ * be gated.
+ */
+ void (*disable) (struct clk *);
+ /* Function ptr to set the parent clock of the clock. */
+ int (*set_parent) (struct clk *, struct clk *);
+};
+
+/*
+ * Enumeration of Synchronous (Memory-less) panel types
+ */
+typedef enum {
+ IPU_PANEL_SHARP_TFT,
+ IPU_PANEL_TFT,
+} ipu_panel_t;
+
+/* IPU Pixel format definitions */
+#define fourcc(a, b, c, d)\
+ (((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24))
+
+/*
+ * Pixel formats are defined with ASCII FOURCC code. The pixel format codes are
+ * the same used by V4L2 API.
+ */
+
+#define IPU_PIX_FMT_GENERIC fourcc('I', 'P', 'U', '0')
+#define IPU_PIX_FMT_GENERIC_32 fourcc('I', 'P', 'U', '1')
+#define IPU_PIX_FMT_LVDS666 fourcc('L', 'V', 'D', '6')
+#define IPU_PIX_FMT_LVDS888 fourcc('L', 'V', 'D', '8')
+
+#define IPU_PIX_FMT_RGB332 fourcc('R', 'G', 'B', '1') /*< 8 RGB-3-3-2 */
+#define IPU_PIX_FMT_RGB555 fourcc('R', 'G', 'B', 'O') /*< 16 RGB-5-5-5 */
+#define IPU_PIX_FMT_RGB565 fourcc('R', 'G', 'B', 'P') /*< 1 6 RGB-5-6-5 */
+#define IPU_PIX_FMT_RGB666 fourcc('R', 'G', 'B', '6') /*< 18 RGB-6-6-6 */
+#define IPU_PIX_FMT_BGR666 fourcc('B', 'G', 'R', '6') /*< 18 BGR-6-6-6 */
+#define IPU_PIX_FMT_BGR24 fourcc('B', 'G', 'R', '3') /*< 24 BGR-8-8-8 */
+#define IPU_PIX_FMT_RGB24 fourcc('R', 'G', 'B', '3') /*< 24 RGB-8-8-8 */
+#define IPU_PIX_FMT_BGR32 fourcc('B', 'G', 'R', '4') /*< 32 BGR-8-8-8-8 */
+#define IPU_PIX_FMT_BGRA32 fourcc('B', 'G', 'R', 'A') /*< 32 BGR-8-8-8-8 */
+#define IPU_PIX_FMT_RGB32 fourcc('R', 'G', 'B', '4') /*< 32 RGB-8-8-8-8 */
+#define IPU_PIX_FMT_RGBA32 fourcc('R', 'G', 'B', 'A') /*< 32 RGB-8-8-8-8 */
+#define IPU_PIX_FMT_ABGR32 fourcc('A', 'B', 'G', 'R') /*< 32 ABGR-8-8-8-8 */
+
+/* YUV Interleaved Formats */
+#define IPU_PIX_FMT_YUYV fourcc('Y', 'U', 'Y', 'V') /*< 16 YUV 4:2:2 */
+#define IPU_PIX_FMT_UYVY fourcc('U', 'Y', 'V', 'Y') /*< 16 YUV 4:2:2 */
+#define IPU_PIX_FMT_Y41P fourcc('Y', '4', '1', 'P') /*< 12 YUV 4:1:1 */
+#define IPU_PIX_FMT_YUV444 fourcc('Y', '4', '4', '4') /*< 24 YUV 4:4:4 */
+
+/* two planes -- one Y, one Cb + Cr interleaved */
+#define IPU_PIX_FMT_NV12 fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */
+
+#define IPU_PIX_FMT_GREY fourcc('G', 'R', 'E', 'Y') /*< 8 Greyscale */
+#define IPU_PIX_FMT_YVU410P fourcc('Y', 'V', 'U', '9') /*< 9 YVU 4:1:0 */
+#define IPU_PIX_FMT_YUV410P fourcc('Y', 'U', 'V', '9') /*< 9 YUV 4:1:0 */
+#define IPU_PIX_FMT_YVU420P fourcc('Y', 'V', '1', '2') /*< 12 YVU 4:2:0 */
+#define IPU_PIX_FMT_YUV420P fourcc('I', '4', '2', '0') /*< 12 YUV 4:2:0 */
+#define IPU_PIX_FMT_YUV420P2 fourcc('Y', 'U', '1', '2') /*< 12 YUV 4:2:0 */
+#define IPU_PIX_FMT_YVU422P fourcc('Y', 'V', '1', '6') /*< 16 YVU 4:2:2 */
+#define IPU_PIX_FMT_YUV422P fourcc('4', '2', '2', 'P') /*< 16 YUV 4:2:2 */
+
+/*
+ * IPU Driver channels definitions.
+ * Note these are different from IDMA channels
+ */
+#define IPU_MAX_CH 32
+#define _MAKE_CHAN(num, v_in, g_in, a_in, out) \
+ ((num << 24) | (v_in << 18) | (g_in << 12) | (a_in << 6) | out)
+#define _MAKE_ALT_CHAN(ch) (ch | (IPU_MAX_CH << 24))
+#define IPU_CHAN_ID(ch) (ch >> 24)
+#define IPU_CHAN_ALT(ch) (ch & 0x02000000)
+#define IPU_CHAN_ALPHA_IN_DMA(ch) ((uint32_t) (ch >> 6) & 0x3F)
+#define IPU_CHAN_GRAPH_IN_DMA(ch) ((uint32_t) (ch >> 12) & 0x3F)
+#define IPU_CHAN_VIDEO_IN_DMA(ch) ((uint32_t) (ch >> 18) & 0x3F)
+#define IPU_CHAN_OUT_DMA(ch) ((uint32_t) (ch & 0x3F))
+#define NO_DMA 0x3F
+#define ALT 1
+
+/*
+ * Enumeration of IPU logical channels. An IPU logical channel is defined as a
+ * combination of an input (memory to IPU), output (IPU to memory), and/or
+ * secondary input IDMA channels and in some cases an Image Converter task.
+ * Some channels consist of only an input or output.
+ */
+typedef enum {
+ CHAN_NONE = -1,
+
+ MEM_DC_SYNC = _MAKE_CHAN(7, 28, NO_DMA, NO_DMA, NO_DMA),
+ MEM_DC_ASYNC = _MAKE_CHAN(8, 41, NO_DMA, NO_DMA, NO_DMA),
+ MEM_BG_SYNC = _MAKE_CHAN(9, 23, NO_DMA, 51, NO_DMA),
+ MEM_FG_SYNC = _MAKE_CHAN(10, 27, NO_DMA, 31, NO_DMA),
+
+ MEM_BG_ASYNC0 = _MAKE_CHAN(11, 24, NO_DMA, 52, NO_DMA),
+ MEM_FG_ASYNC0 = _MAKE_CHAN(12, 29, NO_DMA, 33, NO_DMA),
+ MEM_BG_ASYNC1 = _MAKE_ALT_CHAN(MEM_BG_ASYNC0),
+ MEM_FG_ASYNC1 = _MAKE_ALT_CHAN(MEM_FG_ASYNC0),
+
+ DIRECT_ASYNC0 = _MAKE_CHAN(13, NO_DMA, NO_DMA, NO_DMA, NO_DMA),
+ DIRECT_ASYNC1 = _MAKE_CHAN(14, NO_DMA, NO_DMA, NO_DMA, NO_DMA),
+
+} ipu_channel_t;
+
+/*
+ * Enumeration of types of buffers for a logical channel.
+ */
+typedef enum {
+ IPU_OUTPUT_BUFFER = 0, /*< Buffer for output from IPU */
+ IPU_ALPHA_IN_BUFFER = 1, /*< Buffer for input to IPU */
+ IPU_GRAPH_IN_BUFFER = 2, /*< Buffer for input to IPU */
+ IPU_VIDEO_IN_BUFFER = 3, /*< Buffer for input to IPU */
+ IPU_INPUT_BUFFER = IPU_VIDEO_IN_BUFFER,
+ IPU_SEC_INPUT_BUFFER = IPU_GRAPH_IN_BUFFER,
+} ipu_buffer_t;
+
+#define IPU_PANEL_SERIAL 1
+#define IPU_PANEL_PARALLEL 2
+
+struct ipu_channel {
+ u8 video_in_dma;
+ u8 alpha_in_dma;
+ u8 graph_in_dma;
+ u8 out_dma;
+};
+
+enum ipu_dmfc_type {
+ DMFC_NORMAL = 0,
+ DMFC_HIGH_RESOLUTION_DC,
+ DMFC_HIGH_RESOLUTION_DP,
+ DMFC_HIGH_RESOLUTION_ONLY_DP,
+};
+
+
+/*
+ * Union of initialization parameters for a logical channel.
+ */
+typedef union {
+ struct {
+ uint32_t di;
+ unsigned char interlaced;
+ } mem_dc_sync;
+ struct {
+ uint32_t temp;
+ } mem_sdc_fg;
+ struct {
+ uint32_t di;
+ unsigned char interlaced;
+ uint32_t in_pixel_fmt;
+ uint32_t out_pixel_fmt;
+ unsigned char alpha_chan_en;
+ } mem_dp_bg_sync;
+ struct {
+ uint32_t temp;
+ } mem_sdc_bg;
+ struct {
+ uint32_t di;
+ unsigned char interlaced;
+ uint32_t in_pixel_fmt;
+ uint32_t out_pixel_fmt;
+ unsigned char alpha_chan_en;
+ } mem_dp_fg_sync;
+} ipu_channel_params_t;
+
+/*
+ * Bitfield of Display Interface signal polarities.
+ */
+typedef struct {
+ unsigned datamask_en:1;
+ unsigned ext_clk:1;
+ unsigned interlaced:1;
+ unsigned odd_field_first:1;
+ unsigned clksel_en:1;
+ unsigned clkidle_en:1;
+ unsigned data_pol:1; /* true = inverted */
+ unsigned clk_pol:1; /* true = rising edge */
+ unsigned enable_pol:1;
+ unsigned Hsync_pol:1; /* true = active high */
+ unsigned Vsync_pol:1;
+} ipu_di_signal_cfg_t;
+
+typedef enum {
+ RGB,
+ YCbCr,
+ YUV
+} ipu_color_space_t;
+
+/* Common IPU API */
+int32_t ipu_init_channel(ipu_channel_t channel, ipu_channel_params_t *params);
+void ipu_uninit_channel(ipu_channel_t channel);
+
+int32_t ipu_init_channel_buffer(ipu_channel_t channel, ipu_buffer_t type,
+ uint32_t pixel_fmt,
+ uint16_t width, uint16_t height,
+ uint32_t stride,
+ dma_addr_t phyaddr_0, dma_addr_t phyaddr_1,
+ uint32_t u_offset, uint32_t v_offset);
+
+int32_t ipu_update_channel_buffer(ipu_channel_t channel, ipu_buffer_t type,
+ uint32_t bufNum, dma_addr_t phyaddr);
+
+int32_t ipu_is_channel_busy(ipu_channel_t channel);
+void ipu_clear_buffer_ready(ipu_channel_t channel, ipu_buffer_t type,
+ uint32_t bufNum);
+int32_t ipu_enable_channel(ipu_channel_t channel);
+int32_t ipu_disable_channel(ipu_channel_t channel);
+
+int32_t ipu_init_sync_panel(int disp,
+ uint32_t pixel_clk,
+ uint16_t width, uint16_t height,
+ uint32_t pixel_fmt,
+ uint16_t h_start_width, uint16_t h_sync_width,
+ uint16_t h_end_width, uint16_t v_start_width,
+ uint16_t v_sync_width, uint16_t v_end_width,
+ uint32_t v_to_h_sync, ipu_di_signal_cfg_t sig);
+
+int32_t ipu_disp_set_global_alpha(ipu_channel_t channel, unsigned char enable,
+ uint8_t alpha);
+int32_t ipu_disp_set_color_key(ipu_channel_t channel, unsigned char enable,
+ uint32_t colorKey);
+
+uint32_t bytes_per_pixel(uint32_t fmt);
+
+void clk_enable(struct clk *clk);
+void clk_disable(struct clk *clk);
+u32 clk_get_rate(struct clk *clk);
+int clk_set_rate(struct clk *clk, unsigned long rate);
+long clk_round_rate(struct clk *clk, unsigned long rate);
+int clk_set_parent(struct clk *clk, struct clk *parent);
+int clk_get_usecount(struct clk *clk);
+struct clk *clk_get_parent(struct clk *clk);
+
+void ipu_dump_registers(void);
+int ipu_probe(void);
+
+void ipu_dmfc_init(int dmfc_type, int first);
+void ipu_init_dc_mappings(void);
+void ipu_dmfc_set_wait4eot(int dma_chan, int width);
+void ipu_dc_init(int dc_chan, int di, unsigned char interlaced);
+void ipu_dc_uninit(int dc_chan);
+void ipu_dp_dc_enable(ipu_channel_t channel);
+int ipu_dp_init(ipu_channel_t channel, uint32_t in_pixel_fmt,
+ uint32_t out_pixel_fmt);
+void ipu_dp_uninit(ipu_channel_t channel);
+void ipu_dp_dc_disable(ipu_channel_t channel, unsigned char swap);
+ipu_color_space_t format_to_colorspace(uint32_t fmt);
+
+#endif
--- /dev/null
+/*
+ * Porting to u-boot:
+ *
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de
+ *
+ * Linux IPU driver for MX51:
+ *
+ * (C) Copyright 2005-2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* #define DEBUG */
+#include <common.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include "ipu.h"
+#include "ipu_regs.h"
+
+extern struct mxc_ccm_reg *mxc_ccm;
+extern u32 *ipu_cpmem_base;
+
+struct ipu_ch_param_word {
+ uint32_t data[5];
+ uint32_t res[3];
+};
+
+struct ipu_ch_param {
+ struct ipu_ch_param_word word[2];
+};
+
+#define ipu_ch_param_addr(ch) (((struct ipu_ch_param *)ipu_cpmem_base) + (ch))
+
+#define _param_word(base, w) \
+ (((struct ipu_ch_param *)(base))->word[(w)].data)
+
+#define ipu_ch_param_set_field(base, w, bit, size, v) { \
+ int i = (bit) / 32; \
+ int off = (bit) % 32; \
+ _param_word(base, w)[i] |= (v) << off; \
+ if (((bit) + (size) - 1) / 32 > i) { \
+ _param_word(base, w)[i + 1] |= (v) >> (off ? (32 - off) : 0); \
+ } \
+}
+
+#define ipu_ch_param_mod_field(base, w, bit, size, v) { \
+ int i = (bit) / 32; \
+ int off = (bit) % 32; \
+ u32 mask = (1UL << size) - 1; \
+ u32 temp = _param_word(base, w)[i]; \
+ temp &= ~(mask << off); \
+ _param_word(base, w)[i] = temp | (v) << off; \
+ if (((bit) + (size) - 1) / 32 > i) { \
+ temp = _param_word(base, w)[i + 1]; \
+ temp &= ~(mask >> (32 - off)); \
+ _param_word(base, w)[i + 1] = \
+ temp | ((v) >> (off ? (32 - off) : 0)); \
+ } \
+}
+
+#define ipu_ch_param_read_field(base, w, bit, size) ({ \
+ u32 temp2; \
+ int i = (bit) / 32; \
+ int off = (bit) % 32; \
+ u32 mask = (1UL << size) - 1; \
+ u32 temp1 = _param_word(base, w)[i]; \
+ temp1 = mask & (temp1 >> off); \
+ if (((bit)+(size) - 1) / 32 > i) { \
+ temp2 = _param_word(base, w)[i + 1]; \
+ temp2 &= mask >> (off ? (32 - off) : 0); \
+ temp1 |= temp2 << (off ? (32 - off) : 0); \
+ } \
+ temp1; \
+})
+
+
+void clk_enable(struct clk *clk)
+{
+ if (clk) {
+ if (clk->usecount++ == 0) {
+ clk->enable(clk);
+ }
+ }
+}
+
+void clk_disable(struct clk *clk)
+{
+ if (clk) {
+ if (!(--clk->usecount)) {
+ if (clk->disable)
+ clk->disable(clk);
+ }
+ }
+}
+
+int clk_get_usecount(struct clk *clk)
+{
+ if (clk == NULL)
+ return 0;
+
+ return clk->usecount;
+}
+
+u32 clk_get_rate(struct clk *clk)
+{
+ if (!clk)
+ return 0;
+
+ return clk->rate;
+}
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ if (!clk)
+ return 0;
+
+ return clk->parent;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk && clk->set_rate)
+ clk->set_rate(clk, rate);
+ return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk == NULL || !clk->round_rate)
+ return 0;
+
+ return clk->round_rate(clk, rate);
+}
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ clk->parent = parent;
+ if (clk->set_parent)
+ return clk->set_parent(clk, parent);
+ return 0;
+}
+
+static int clk_ipu_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= MXC_CCM_CCGR_CG_MASK << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ /* Handshake with IPU when certain clock rates are changed. */
+ reg = __raw_readl(&mxc_ccm->ccdr);
+ reg &= ~MXC_CCM_CCDR_IPU_HS_MASK;
+ __raw_writel(reg, &mxc_ccm->ccdr);
+
+ /* Handshake with IPU when LPM is entered as its enabled. */
+ reg = __raw_readl(&mxc_ccm->clpcr);
+ reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
+ __raw_writel(reg, &mxc_ccm->clpcr);
+
+ return 0;
+}
+
+static void clk_ipu_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(MXC_CCM_CCGR_CG_MASK << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+
+ /*
+ * No handshake with IPU whe dividers are changed
+ * as its not enabled.
+ */
+ reg = __raw_readl(&mxc_ccm->ccdr);
+ reg |= MXC_CCM_CCDR_IPU_HS_MASK;
+ __raw_writel(reg, &mxc_ccm->ccdr);
+
+ /* No handshake with IPU when LPM is entered as its not enabled. */
+ reg = __raw_readl(&mxc_ccm->clpcr);
+ reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
+ __raw_writel(reg, &mxc_ccm->clpcr);
+}
+
+
+static struct clk ipu_clk = {
+ .name = "ipu_clk",
+ .rate = 133000000,
+ .enable_reg = (u32 *)(MXC_CCM_BASE +
+ offsetof(struct mxc_ccm_reg, CCGR5)),
+ .enable_shift = MXC_CCM_CCGR5_CG5_OFFSET,
+ .enable = clk_ipu_enable,
+ .disable = clk_ipu_disable,
+ .usecount = 0,
+};
+
+/* Globals */
+struct clk *g_ipu_clk;
+unsigned char g_ipu_clk_enabled;
+struct clk *g_di_clk[2];
+struct clk *g_pixel_clk[2];
+unsigned char g_dc_di_assignment[10];
+uint32_t g_channel_init_mask;
+uint32_t g_channel_enable_mask;
+
+static int ipu_dc_use_count;
+static int ipu_dp_use_count;
+static int ipu_dmfc_use_count;
+static int ipu_di_use_count[2];
+
+u32 *ipu_cpmem_base;
+u32 *ipu_dc_tmpl_reg;
+
+/* Static functions */
+
+static inline void ipu_ch_param_set_high_priority(uint32_t ch)
+{
+ ipu_ch_param_mod_field(ipu_ch_param_addr(ch), 1, 93, 2, 1);
+};
+
+static inline uint32_t channel_2_dma(ipu_channel_t ch, ipu_buffer_t type)
+{
+ return ((uint32_t) ch >> (6 * type)) & 0x3F;
+};
+
+/* Either DP BG or DP FG can be graphic window */
+static inline int ipu_is_dp_graphic_chan(uint32_t dma_chan)
+{
+ return (dma_chan == 23 || dma_chan == 27);
+}
+
+static inline int ipu_is_dmfc_chan(uint32_t dma_chan)
+{
+ return ((dma_chan >= 23) && (dma_chan <= 29));
+}
+
+
+static inline void ipu_ch_param_set_buffer(uint32_t ch, int bufNum,
+ dma_addr_t phyaddr)
+{
+ ipu_ch_param_mod_field(ipu_ch_param_addr(ch), 1, 29 * bufNum, 29,
+ phyaddr / 8);
+};
+
+#define idma_is_valid(ch) (ch != NO_DMA)
+#define idma_mask(ch) (idma_is_valid(ch) ? (1UL << (ch & 0x1F)) : 0)
+#define idma_is_set(reg, dma) (__raw_readl(reg(dma)) & idma_mask(dma))
+
+static void ipu_pixel_clk_recalc(struct clk *clk)
+{
+ u32 div = __raw_readl(DI_BS_CLKGEN0(clk->id));
+ if (div == 0)
+ clk->rate = 0;
+ else
+ clk->rate = (clk->parent->rate * 16) / div;
+}
+
+static unsigned long ipu_pixel_clk_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ u32 div, div1;
+ u32 tmp;
+ /*
+ * Calculate divider
+ * Fractional part is 4 bits,
+ * so simply multiply by 2^4 to get fractional part.
+ */
+ tmp = (clk->parent->rate * 16);
+ div = tmp / rate;
+
+ if (div < 0x10) /* Min DI disp clock divider is 1 */
+ div = 0x10;
+ if (div & ~0xFEF)
+ div &= 0xFF8;
+ else {
+ div1 = div & 0xFE0;
+ if ((tmp/div1 - tmp/div) < rate / 4)
+ div = div1;
+ else
+ div &= 0xFF8;
+ }
+ return (clk->parent->rate * 16) / div;
+}
+
+static int ipu_pixel_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 div = (clk->parent->rate * 16) / rate;
+
+ __raw_writel(div, DI_BS_CLKGEN0(clk->id));
+
+ /* Setup pixel clock timing */
+ __raw_writel((div / 16) << 16, DI_BS_CLKGEN1(clk->id));
+
+ clk->rate = (clk->parent->rate * 16) / div;
+ return 0;
+}
+
+static int ipu_pixel_clk_enable(struct clk *clk)
+{
+ u32 disp_gen = __raw_readl(IPU_DISP_GEN);
+ disp_gen |= clk->id ? DI1_COUNTER_RELEASE : DI0_COUNTER_RELEASE;
+ __raw_writel(disp_gen, IPU_DISP_GEN);
+
+ return 0;
+}
+
+static void ipu_pixel_clk_disable(struct clk *clk)
+{
+ u32 disp_gen = __raw_readl(IPU_DISP_GEN);
+ disp_gen &= clk->id ? ~DI1_COUNTER_RELEASE : ~DI0_COUNTER_RELEASE;
+ __raw_writel(disp_gen, IPU_DISP_GEN);
+
+}
+
+static int ipu_pixel_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 di_gen = __raw_readl(DI_GENERAL(clk->id));
+
+ if (parent == g_ipu_clk)
+ di_gen &= ~DI_GEN_DI_CLK_EXT;
+ else if (!IS_ERR(g_di_clk[clk->id]) && parent == g_di_clk[clk->id])
+ di_gen |= DI_GEN_DI_CLK_EXT;
+ else
+ return -EINVAL;
+
+ __raw_writel(di_gen, DI_GENERAL(clk->id));
+ ipu_pixel_clk_recalc(clk);
+ return 0;
+}
+
+static struct clk pixel_clk[] = {
+ {
+ .name = "pixel_clk",
+ .id = 0,
+ .recalc = ipu_pixel_clk_recalc,
+ .set_rate = ipu_pixel_clk_set_rate,
+ .round_rate = ipu_pixel_clk_round_rate,
+ .set_parent = ipu_pixel_clk_set_parent,
+ .enable = ipu_pixel_clk_enable,
+ .disable = ipu_pixel_clk_disable,
+ .usecount = 0,
+ },
+ {
+ .name = "pixel_clk",
+ .id = 1,
+ .recalc = ipu_pixel_clk_recalc,
+ .set_rate = ipu_pixel_clk_set_rate,
+ .round_rate = ipu_pixel_clk_round_rate,
+ .set_parent = ipu_pixel_clk_set_parent,
+ .enable = ipu_pixel_clk_enable,
+ .disable = ipu_pixel_clk_disable,
+ .usecount = 0,
+ },
+};
+
+/*
+ * This function resets IPU
+ */
+void ipu_reset(void)
+{
+ u32 *reg;
+ u32 value;
+
+ reg = (u32 *)SRC_BASE_ADDR;
+ value = __raw_readl(reg);
+ value = value | SW_IPU_RST;
+ __raw_writel(value, reg);
+}
+
+/*
+ * This function is called by the driver framework to initialize the IPU
+ * hardware.
+ *
+ * @param dev The device structure for the IPU passed in by the
+ * driver framework.
+ *
+ * @return Returns 0 on success or negative error code on error
+ */
+int ipu_probe(void)
+{
+ unsigned long ipu_base;
+ u32 temp;
+
+ u32 *reg_hsc_mcd = (u32 *)MIPI_HSC_BASE_ADDR;
+ u32 *reg_hsc_mxt_conf = (u32 *)(MIPI_HSC_BASE_ADDR + 0x800);
+
+ __raw_writel(0xF00, reg_hsc_mcd);
+
+ /* CSI mode reserved*/
+ temp = __raw_readl(reg_hsc_mxt_conf);
+ __raw_writel(temp | 0x0FF, reg_hsc_mxt_conf);
+
+ temp = __raw_readl(reg_hsc_mxt_conf);
+ __raw_writel(temp | 0x10000, reg_hsc_mxt_conf);
+
+ ipu_base = IPU_CTRL_BASE_ADDR;
+ ipu_cpmem_base = (u32 *)(ipu_base + IPU_CPMEM_REG_BASE);
+ ipu_dc_tmpl_reg = (u32 *)(ipu_base + IPU_DC_TMPL_REG_BASE);
+
+ g_pixel_clk[0] = &pixel_clk[0];
+ g_pixel_clk[1] = &pixel_clk[1];
+
+ g_ipu_clk = &ipu_clk;
+ debug("ipu_clk = %u\n", clk_get_rate(g_ipu_clk));
+
+ ipu_reset();
+
+ clk_set_parent(g_pixel_clk[0], g_ipu_clk);
+ clk_set_parent(g_pixel_clk[1], g_ipu_clk);
+ clk_enable(g_ipu_clk);
+
+ g_di_clk[0] = NULL;
+ g_di_clk[1] = NULL;
+
+ __raw_writel(0x807FFFFF, IPU_MEM_RST);
+ while (__raw_readl(IPU_MEM_RST) & 0x80000000)
+ ;
+
+ ipu_init_dc_mappings();
+
+ __raw_writel(0, IPU_INT_CTRL(5));
+ __raw_writel(0, IPU_INT_CTRL(6));
+ __raw_writel(0, IPU_INT_CTRL(9));
+ __raw_writel(0, IPU_INT_CTRL(10));
+
+ /* DMFC Init */
+ ipu_dmfc_init(DMFC_NORMAL, 1);
+
+ /* Set sync refresh channels as high priority */
+ __raw_writel(0x18800000L, IDMAC_CHA_PRI(0));
+
+ /* Set MCU_T to divide MCU access window into 2 */
+ __raw_writel(0x00400000L | (IPU_MCU_T_DEFAULT << 18), IPU_DISP_GEN);
+
+ clk_disable(g_ipu_clk);
+
+ return 0;
+}
+
+void ipu_dump_registers(void)
+{
+ debug("IPU_CONF = \t0x%08X\n", __raw_readl(IPU_CONF));
+ debug("IDMAC_CONF = \t0x%08X\n", __raw_readl(IDMAC_CONF));
+ debug("IDMAC_CHA_EN1 = \t0x%08X\n",
+ __raw_readl(IDMAC_CHA_EN(0)));
+ debug("IDMAC_CHA_EN2 = \t0x%08X\n",
+ __raw_readl(IDMAC_CHA_EN(32)));
+ debug("IDMAC_CHA_PRI1 = \t0x%08X\n",
+ __raw_readl(IDMAC_CHA_PRI(0)));
+ debug("IDMAC_CHA_PRI2 = \t0x%08X\n",
+ __raw_readl(IDMAC_CHA_PRI(32)));
+ debug("IPU_CHA_DB_MODE_SEL0 = \t0x%08X\n",
+ __raw_readl(IPU_CHA_DB_MODE_SEL(0)));
+ debug("IPU_CHA_DB_MODE_SEL1 = \t0x%08X\n",
+ __raw_readl(IPU_CHA_DB_MODE_SEL(32)));
+ debug("DMFC_WR_CHAN = \t0x%08X\n",
+ __raw_readl(DMFC_WR_CHAN));
+ debug("DMFC_WR_CHAN_DEF = \t0x%08X\n",
+ __raw_readl(DMFC_WR_CHAN_DEF));
+ debug("DMFC_DP_CHAN = \t0x%08X\n",
+ __raw_readl(DMFC_DP_CHAN));
+ debug("DMFC_DP_CHAN_DEF = \t0x%08X\n",
+ __raw_readl(DMFC_DP_CHAN_DEF));
+ debug("DMFC_IC_CTRL = \t0x%08X\n",
+ __raw_readl(DMFC_IC_CTRL));
+ debug("IPU_FS_PROC_FLOW1 = \t0x%08X\n",
+ __raw_readl(IPU_FS_PROC_FLOW1));
+ debug("IPU_FS_PROC_FLOW2 = \t0x%08X\n",
+ __raw_readl(IPU_FS_PROC_FLOW2));
+ debug("IPU_FS_PROC_FLOW3 = \t0x%08X\n",
+ __raw_readl(IPU_FS_PROC_FLOW3));
+ debug("IPU_FS_DISP_FLOW1 = \t0x%08X\n",
+ __raw_readl(IPU_FS_DISP_FLOW1));
+}
+
+/*
+ * This function is called to initialize a logical IPU channel.
+ *
+ * @param channel Input parameter for the logical channel ID to init.
+ *
+ * @param params Input parameter containing union of channel
+ * initialization parameters.
+ *
+ * @return Returns 0 on success or negative error code on fail
+ */
+int32_t ipu_init_channel(ipu_channel_t channel, ipu_channel_params_t *params)
+{
+ int ret = 0;
+ uint32_t ipu_conf;
+
+ debug("init channel = %d\n", IPU_CHAN_ID(channel));
+
+ if (g_ipu_clk_enabled == 0) {
+ g_ipu_clk_enabled = 1;
+ clk_enable(g_ipu_clk);
+ }
+
+
+ if (g_channel_init_mask & (1L << IPU_CHAN_ID(channel))) {
+ printf("Warning: channel already initialized %d\n",
+ IPU_CHAN_ID(channel));
+ }
+
+ ipu_conf = __raw_readl(IPU_CONF);
+
+ switch (channel) {
+ case MEM_DC_SYNC:
+ if (params->mem_dc_sync.di > 1) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ g_dc_di_assignment[1] = params->mem_dc_sync.di;
+ ipu_dc_init(1, params->mem_dc_sync.di,
+ params->mem_dc_sync.interlaced);
+ ipu_di_use_count[params->mem_dc_sync.di]++;
+ ipu_dc_use_count++;
+ ipu_dmfc_use_count++;
+ break;
+ case MEM_BG_SYNC:
+ if (params->mem_dp_bg_sync.di > 1) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ g_dc_di_assignment[5] = params->mem_dp_bg_sync.di;
+ ipu_dp_init(channel, params->mem_dp_bg_sync.in_pixel_fmt,
+ params->mem_dp_bg_sync.out_pixel_fmt);
+ ipu_dc_init(5, params->mem_dp_bg_sync.di,
+ params->mem_dp_bg_sync.interlaced);
+ ipu_di_use_count[params->mem_dp_bg_sync.di]++;
+ ipu_dc_use_count++;
+ ipu_dp_use_count++;
+ ipu_dmfc_use_count++;
+ break;
+ case MEM_FG_SYNC:
+ ipu_dp_init(channel, params->mem_dp_fg_sync.in_pixel_fmt,
+ params->mem_dp_fg_sync.out_pixel_fmt);
+
+ ipu_dc_use_count++;
+ ipu_dp_use_count++;
+ ipu_dmfc_use_count++;
+ break;
+ default:
+ printf("Missing channel initialization\n");
+ break;
+ }
+
+ /* Enable IPU sub module */
+ g_channel_init_mask |= 1L << IPU_CHAN_ID(channel);
+ if (ipu_dc_use_count == 1)
+ ipu_conf |= IPU_CONF_DC_EN;
+ if (ipu_dp_use_count == 1)
+ ipu_conf |= IPU_CONF_DP_EN;
+ if (ipu_dmfc_use_count == 1)
+ ipu_conf |= IPU_CONF_DMFC_EN;
+ if (ipu_di_use_count[0] == 1) {
+ ipu_conf |= IPU_CONF_DI0_EN;
+ }
+ if (ipu_di_use_count[1] == 1) {
+ ipu_conf |= IPU_CONF_DI1_EN;
+ }
+
+ __raw_writel(ipu_conf, IPU_CONF);
+
+err:
+ return ret;
+}
+
+/*
+ * This function is called to uninitialize a logical IPU channel.
+ *
+ * @param channel Input parameter for the logical channel ID to uninit.
+ */
+void ipu_uninit_channel(ipu_channel_t channel)
+{
+ uint32_t reg;
+ uint32_t in_dma, out_dma = 0;
+ uint32_t ipu_conf;
+
+ if ((g_channel_init_mask & (1L << IPU_CHAN_ID(channel))) == 0) {
+ debug("Channel already uninitialized %d\n",
+ IPU_CHAN_ID(channel));
+ return;
+ }
+
+ /*
+ * Make sure channel is disabled
+ * Get input and output dma channels
+ */
+ in_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER);
+ out_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER);
+
+ if (idma_is_set(IDMAC_CHA_EN, in_dma) ||
+ idma_is_set(IDMAC_CHA_EN, out_dma)) {
+ printf(
+ "Channel %d is not disabled, disable first\n",
+ IPU_CHAN_ID(channel));
+ return;
+ }
+
+ ipu_conf = __raw_readl(IPU_CONF);
+
+ /* Reset the double buffer */
+ reg = __raw_readl(IPU_CHA_DB_MODE_SEL(in_dma));
+ __raw_writel(reg & ~idma_mask(in_dma), IPU_CHA_DB_MODE_SEL(in_dma));
+ reg = __raw_readl(IPU_CHA_DB_MODE_SEL(out_dma));
+ __raw_writel(reg & ~idma_mask(out_dma), IPU_CHA_DB_MODE_SEL(out_dma));
+
+ switch (channel) {
+ case MEM_DC_SYNC:
+ ipu_dc_uninit(1);
+ ipu_di_use_count[g_dc_di_assignment[1]]--;
+ ipu_dc_use_count--;
+ ipu_dmfc_use_count--;
+ break;
+ case MEM_BG_SYNC:
+ ipu_dp_uninit(channel);
+ ipu_dc_uninit(5);
+ ipu_di_use_count[g_dc_di_assignment[5]]--;
+ ipu_dc_use_count--;
+ ipu_dp_use_count--;
+ ipu_dmfc_use_count--;
+ break;
+ case MEM_FG_SYNC:
+ ipu_dp_uninit(channel);
+ ipu_dc_use_count--;
+ ipu_dp_use_count--;
+ ipu_dmfc_use_count--;
+ break;
+ default:
+ break;
+ }
+
+ g_channel_init_mask &= ~(1L << IPU_CHAN_ID(channel));
+
+ if (ipu_dc_use_count == 0)
+ ipu_conf &= ~IPU_CONF_DC_EN;
+ if (ipu_dp_use_count == 0)
+ ipu_conf &= ~IPU_CONF_DP_EN;
+ if (ipu_dmfc_use_count == 0)
+ ipu_conf &= ~IPU_CONF_DMFC_EN;
+ if (ipu_di_use_count[0] == 0) {
+ ipu_conf &= ~IPU_CONF_DI0_EN;
+ }
+ if (ipu_di_use_count[1] == 0) {
+ ipu_conf &= ~IPU_CONF_DI1_EN;
+ }
+
+ __raw_writel(ipu_conf, IPU_CONF);
+
+ if (ipu_conf == 0) {
+ clk_disable(g_ipu_clk);
+ g_ipu_clk_enabled = 0;
+ }
+
+}
+
+static inline void ipu_ch_param_dump(int ch)
+{
+#ifdef DEBUG
+ struct ipu_ch_param *p = ipu_ch_param_addr(ch);
+ debug("ch %d word 0 - %08X %08X %08X %08X %08X\n", ch,
+ p->word[0].data[0], p->word[0].data[1], p->word[0].data[2],
+ p->word[0].data[3], p->word[0].data[4]);
+ debug("ch %d word 1 - %08X %08X %08X %08X %08X\n", ch,
+ p->word[1].data[0], p->word[1].data[1], p->word[1].data[2],
+ p->word[1].data[3], p->word[1].data[4]);
+ debug("PFS 0x%x, ",
+ ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 85, 4));
+ debug("BPP 0x%x, ",
+ ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 107, 3));
+ debug("NPB 0x%x\n",
+ ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 78, 7));
+
+ debug("FW %d, ",
+ ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 125, 13));
+ debug("FH %d, ",
+ ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 138, 12));
+ debug("Stride %d\n",
+ ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 102, 14));
+
+ debug("Width0 %d+1, ",
+ ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 116, 3));
+ debug("Width1 %d+1, ",
+ ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 119, 3));
+ debug("Width2 %d+1, ",
+ ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 122, 3));
+ debug("Width3 %d+1, ",
+ ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 125, 3));
+ debug("Offset0 %d, ",
+ ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 128, 5));
+ debug("Offset1 %d, ",
+ ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 133, 5));
+ debug("Offset2 %d, ",
+ ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 138, 5));
+ debug("Offset3 %d\n",
+ ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 143, 5));
+#endif
+}
+
+static inline void ipu_ch_params_set_packing(struct ipu_ch_param *p,
+ int red_width, int red_offset,
+ int green_width, int green_offset,
+ int blue_width, int blue_offset,
+ int alpha_width, int alpha_offset)
+{
+ /* Setup red width and offset */
+ ipu_ch_param_set_field(p, 1, 116, 3, red_width - 1);
+ ipu_ch_param_set_field(p, 1, 128, 5, red_offset);
+ /* Setup green width and offset */
+ ipu_ch_param_set_field(p, 1, 119, 3, green_width - 1);
+ ipu_ch_param_set_field(p, 1, 133, 5, green_offset);
+ /* Setup blue width and offset */
+ ipu_ch_param_set_field(p, 1, 122, 3, blue_width - 1);
+ ipu_ch_param_set_field(p, 1, 138, 5, blue_offset);
+ /* Setup alpha width and offset */
+ ipu_ch_param_set_field(p, 1, 125, 3, alpha_width - 1);
+ ipu_ch_param_set_field(p, 1, 143, 5, alpha_offset);
+}
+
+static void ipu_ch_param_init(int ch,
+ uint32_t pixel_fmt, uint32_t width,
+ uint32_t height, uint32_t stride,
+ uint32_t u, uint32_t v,
+ uint32_t uv_stride, dma_addr_t addr0,
+ dma_addr_t addr1)
+{
+ uint32_t u_offset = 0;
+ uint32_t v_offset = 0;
+ struct ipu_ch_param params;
+
+ memset(¶ms, 0, sizeof(params));
+
+ ipu_ch_param_set_field(¶ms, 0, 125, 13, width - 1);
+
+ if ((ch == 8) || (ch == 9) || (ch == 10)) {
+ ipu_ch_param_set_field(¶ms, 0, 138, 12, (height / 2) - 1);
+ ipu_ch_param_set_field(¶ms, 1, 102, 14, (stride * 2) - 1);
+ } else {
+ ipu_ch_param_set_field(¶ms, 0, 138, 12, height - 1);
+ ipu_ch_param_set_field(¶ms, 1, 102, 14, stride - 1);
+ }
+
+ ipu_ch_param_set_field(¶ms, 1, 0, 29, addr0 >> 3);
+ ipu_ch_param_set_field(¶ms, 1, 29, 29, addr1 >> 3);
+
+ switch (pixel_fmt) {
+ case IPU_PIX_FMT_GENERIC:
+ /*Represents 8-bit Generic data */
+ ipu_ch_param_set_field(¶ms, 0, 107, 3, 5); /* bits/pixel */
+ ipu_ch_param_set_field(¶ms, 1, 85, 4, 6); /* pix format */
+ ipu_ch_param_set_field(¶ms, 1, 78, 7, 63); /* burst size */
+
+ break;
+ case IPU_PIX_FMT_GENERIC_32:
+ /*Represents 32-bit Generic data */
+ break;
+ case IPU_PIX_FMT_RGB565:
+ ipu_ch_param_set_field(¶ms, 0, 107, 3, 3); /* bits/pixel */
+ ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */
+ ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */
+
+ ipu_ch_params_set_packing(¶ms, 5, 0, 6, 5, 5, 11, 8, 16);
+ break;
+ case IPU_PIX_FMT_BGR24:
+ ipu_ch_param_set_field(¶ms, 0, 107, 3, 1); /* bits/pixel */
+ ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */
+ ipu_ch_param_set_field(¶ms, 1, 78, 7, 19); /* burst size */
+
+ ipu_ch_params_set_packing(¶ms, 8, 0, 8, 8, 8, 16, 8, 24);
+ break;
+ case IPU_PIX_FMT_RGB24:
+ case IPU_PIX_FMT_YUV444:
+ ipu_ch_param_set_field(¶ms, 0, 107, 3, 1); /* bits/pixel */
+ ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */
+ ipu_ch_param_set_field(¶ms, 1, 78, 7, 19); /* burst size */
+
+ ipu_ch_params_set_packing(¶ms, 8, 16, 8, 8, 8, 0, 8, 24);
+ break;
+ case IPU_PIX_FMT_BGRA32:
+ case IPU_PIX_FMT_BGR32:
+ ipu_ch_param_set_field(¶ms, 0, 107, 3, 0); /* bits/pixel */
+ ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */
+ ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */
+
+ ipu_ch_params_set_packing(¶ms, 8, 8, 8, 16, 8, 24, 8, 0);
+ break;
+ case IPU_PIX_FMT_RGBA32:
+ case IPU_PIX_FMT_RGB32:
+ ipu_ch_param_set_field(¶ms, 0, 107, 3, 0); /* bits/pixel */
+ ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */
+ ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */
+
+ ipu_ch_params_set_packing(¶ms, 8, 24, 8, 16, 8, 8, 8, 0);
+ break;
+ case IPU_PIX_FMT_ABGR32:
+ ipu_ch_param_set_field(¶ms, 0, 107, 3, 0); /* bits/pixel */
+ ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */
+
+ ipu_ch_params_set_packing(¶ms, 8, 0, 8, 8, 8, 16, 8, 24);
+ break;
+ case IPU_PIX_FMT_UYVY:
+ ipu_ch_param_set_field(¶ms, 0, 107, 3, 3); /* bits/pixel */
+ ipu_ch_param_set_field(¶ms, 1, 85, 4, 0xA); /* pix format */
+ ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */
+ break;
+ case IPU_PIX_FMT_YUYV:
+ ipu_ch_param_set_field(¶ms, 0, 107, 3, 3); /* bits/pixel */
+ ipu_ch_param_set_field(¶ms, 1, 85, 4, 0x8); /* pix format */
+ ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */
+ break;
+ case IPU_PIX_FMT_YUV420P2:
+ case IPU_PIX_FMT_YUV420P:
+ ipu_ch_param_set_field(¶ms, 1, 85, 4, 2); /* pix format */
+
+ if (uv_stride < stride / 2)
+ uv_stride = stride / 2;
+
+ u_offset = stride * height;
+ v_offset = u_offset + (uv_stride * height / 2);
+ /* burst size */
+ if ((ch == 8) || (ch == 9) || (ch == 10)) {
+ ipu_ch_param_set_field(¶ms, 1, 78, 7, 15);
+ uv_stride = uv_stride*2;
+ } else {
+ ipu_ch_param_set_field(¶ms, 1, 78, 7, 31);
+ }
+ break;
+ case IPU_PIX_FMT_YVU422P:
+ /* BPP & pixel format */
+ ipu_ch_param_set_field(¶ms, 1, 85, 4, 1); /* pix format */
+ ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */
+
+ if (uv_stride < stride / 2)
+ uv_stride = stride / 2;
+
+ v_offset = (v == 0) ? stride * height : v;
+ u_offset = (u == 0) ? v_offset + v_offset / 2 : u;
+ break;
+ case IPU_PIX_FMT_YUV422P:
+ /* BPP & pixel format */
+ ipu_ch_param_set_field(¶ms, 1, 85, 4, 1); /* pix format */
+ ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */
+
+ if (uv_stride < stride / 2)
+ uv_stride = stride / 2;
+
+ u_offset = (u == 0) ? stride * height : u;
+ v_offset = (v == 0) ? u_offset + u_offset / 2 : v;
+ break;
+ case IPU_PIX_FMT_NV12:
+ /* BPP & pixel format */
+ ipu_ch_param_set_field(¶ms, 1, 85, 4, 4); /* pix format */
+ ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */
+ uv_stride = stride;
+ u_offset = (u == 0) ? stride * height : u;
+ break;
+ default:
+ puts("mxc ipu: unimplemented pixel format\n");
+ break;
+ }
+
+
+ if (uv_stride)
+ ipu_ch_param_set_field(¶ms, 1, 128, 14, uv_stride - 1);
+
+ /* Get the uv offset from user when need cropping */
+ if (u || v) {
+ u_offset = u;
+ v_offset = v;
+ }
+
+ /* UBO and VBO are 22-bit */
+ if (u_offset/8 > 0x3fffff)
+ puts("The value of U offset exceeds IPU limitation\n");
+ if (v_offset/8 > 0x3fffff)
+ puts("The value of V offset exceeds IPU limitation\n");
+
+ ipu_ch_param_set_field(¶ms, 0, 46, 22, u_offset / 8);
+ ipu_ch_param_set_field(¶ms, 0, 68, 22, v_offset / 8);
+
+ debug("initializing idma ch %d @ %p\n", ch, ipu_ch_param_addr(ch));
+ memcpy(ipu_ch_param_addr(ch), ¶ms, sizeof(params));
+};
+
+/*
+ * This function is called to initialize a buffer for logical IPU channel.
+ *
+ * @param channel Input parameter for the logical channel ID.
+ *
+ * @param type Input parameter which buffer to initialize.
+ *
+ * @param pixel_fmt Input parameter for pixel format of buffer.
+ * Pixel format is a FOURCC ASCII code.
+ *
+ * @param width Input parameter for width of buffer in pixels.
+ *
+ * @param height Input parameter for height of buffer in pixels.
+ *
+ * @param stride Input parameter for stride length of buffer
+ * in pixels.
+ *
+ * @param phyaddr_0 Input parameter buffer 0 physical address.
+ *
+ * @param phyaddr_1 Input parameter buffer 1 physical address.
+ * Setting this to a value other than NULL enables
+ * double buffering mode.
+ *
+ * @param u private u offset for additional cropping,
+ * zero if not used.
+ *
+ * @param v private v offset for additional cropping,
+ * zero if not used.
+ *
+ * @return Returns 0 on success or negative error code on fail
+ */
+int32_t ipu_init_channel_buffer(ipu_channel_t channel, ipu_buffer_t type,
+ uint32_t pixel_fmt,
+ uint16_t width, uint16_t height,
+ uint32_t stride,
+ dma_addr_t phyaddr_0, dma_addr_t phyaddr_1,
+ uint32_t u, uint32_t v)
+{
+ uint32_t reg;
+ uint32_t dma_chan;
+
+ dma_chan = channel_2_dma(channel, type);
+ if (!idma_is_valid(dma_chan))
+ return -EINVAL;
+
+ if (stride < width * bytes_per_pixel(pixel_fmt))
+ stride = width * bytes_per_pixel(pixel_fmt);
+
+ if (stride % 4) {
+ printf(
+ "Stride not 32-bit aligned, stride = %d\n", stride);
+ return -EINVAL;
+ }
+ /* Build parameter memory data for DMA channel */
+ ipu_ch_param_init(dma_chan, pixel_fmt, width, height, stride, u, v, 0,
+ phyaddr_0, phyaddr_1);
+
+ if (ipu_is_dmfc_chan(dma_chan)) {
+ ipu_dmfc_set_wait4eot(dma_chan, width);
+ }
+
+ if (idma_is_set(IDMAC_CHA_PRI, dma_chan))
+ ipu_ch_param_set_high_priority(dma_chan);
+
+ ipu_ch_param_dump(dma_chan);
+
+ reg = __raw_readl(IPU_CHA_DB_MODE_SEL(dma_chan));
+ if (phyaddr_1)
+ reg |= idma_mask(dma_chan);
+ else
+ reg &= ~idma_mask(dma_chan);
+ __raw_writel(reg, IPU_CHA_DB_MODE_SEL(dma_chan));
+
+ /* Reset to buffer 0 */
+ __raw_writel(idma_mask(dma_chan), IPU_CHA_CUR_BUF(dma_chan));
+
+ return 0;
+}
+
+/*
+ * This function enables a logical channel.
+ *
+ * @param channel Input parameter for the logical channel ID.
+ *
+ * @return This function returns 0 on success or negative error code on
+ * fail.
+ */
+int32_t ipu_enable_channel(ipu_channel_t channel)
+{
+ uint32_t reg;
+ uint32_t in_dma;
+ uint32_t out_dma;
+
+ if (g_channel_enable_mask & (1L << IPU_CHAN_ID(channel))) {
+ printf("Warning: channel already enabled %d\n",
+ IPU_CHAN_ID(channel));
+ }
+
+ /* Get input and output dma channels */
+ out_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER);
+ in_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER);
+
+ if (idma_is_valid(in_dma)) {
+ reg = __raw_readl(IDMAC_CHA_EN(in_dma));
+ __raw_writel(reg | idma_mask(in_dma), IDMAC_CHA_EN(in_dma));
+ }
+ if (idma_is_valid(out_dma)) {
+ reg = __raw_readl(IDMAC_CHA_EN(out_dma));
+ __raw_writel(reg | idma_mask(out_dma), IDMAC_CHA_EN(out_dma));
+ }
+
+ if ((channel == MEM_DC_SYNC) || (channel == MEM_BG_SYNC) ||
+ (channel == MEM_FG_SYNC))
+ ipu_dp_dc_enable(channel);
+
+ g_channel_enable_mask |= 1L << IPU_CHAN_ID(channel);
+
+ return 0;
+}
+
+/*
+ * This function clear buffer ready for a logical channel.
+ *
+ * @param channel Input parameter for the logical channel ID.
+ *
+ * @param type Input parameter which buffer to clear.
+ *
+ * @param bufNum Input parameter for which buffer number clear
+ * ready state.
+ *
+ */
+void ipu_clear_buffer_ready(ipu_channel_t channel, ipu_buffer_t type,
+ uint32_t bufNum)
+{
+ uint32_t dma_ch = channel_2_dma(channel, type);
+
+ if (!idma_is_valid(dma_ch))
+ return;
+
+ __raw_writel(0xF0000000, IPU_GPR); /* write one to clear */
+ if (bufNum == 0) {
+ if (idma_is_set(IPU_CHA_BUF0_RDY, dma_ch)) {
+ __raw_writel(idma_mask(dma_ch),
+ IPU_CHA_BUF0_RDY(dma_ch));
+ }
+ } else {
+ if (idma_is_set(IPU_CHA_BUF1_RDY, dma_ch)) {
+ __raw_writel(idma_mask(dma_ch),
+ IPU_CHA_BUF1_RDY(dma_ch));
+ }
+ }
+ __raw_writel(0x0, IPU_GPR); /* write one to set */
+}
+
+/*
+ * This function disables a logical channel.
+ *
+ * @param channel Input parameter for the logical channel ID.
+ *
+ * @param wait_for_stop Flag to set whether to wait for channel end
+ * of frame or return immediately.
+ *
+ * @return This function returns 0 on success or negative error code on
+ * fail.
+ */
+int32_t ipu_disable_channel(ipu_channel_t channel)
+{
+ uint32_t reg;
+ uint32_t in_dma;
+ uint32_t out_dma;
+
+ if ((g_channel_enable_mask & (1L << IPU_CHAN_ID(channel))) == 0) {
+ debug("Channel already disabled %d\n",
+ IPU_CHAN_ID(channel));
+ return 0;
+ }
+
+ /* Get input and output dma channels */
+ out_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER);
+ in_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER);
+
+ if ((idma_is_valid(in_dma) &&
+ !idma_is_set(IDMAC_CHA_EN, in_dma))
+ && (idma_is_valid(out_dma) &&
+ !idma_is_set(IDMAC_CHA_EN, out_dma)))
+ return -EINVAL;
+
+ if ((channel == MEM_BG_SYNC) || (channel == MEM_FG_SYNC) ||
+ (channel == MEM_DC_SYNC)) {
+ ipu_dp_dc_disable(channel, 0);
+ }
+
+ /* Disable DMA channel(s) */
+ if (idma_is_valid(in_dma)) {
+ reg = __raw_readl(IDMAC_CHA_EN(in_dma));
+ __raw_writel(reg & ~idma_mask(in_dma), IDMAC_CHA_EN(in_dma));
+ __raw_writel(idma_mask(in_dma), IPU_CHA_CUR_BUF(in_dma));
+ }
+ if (idma_is_valid(out_dma)) {
+ reg = __raw_readl(IDMAC_CHA_EN(out_dma));
+ __raw_writel(reg & ~idma_mask(out_dma), IDMAC_CHA_EN(out_dma));
+ __raw_writel(idma_mask(out_dma), IPU_CHA_CUR_BUF(out_dma));
+ }
+
+ g_channel_enable_mask &= ~(1L << IPU_CHAN_ID(channel));
+
+ /* Set channel buffers NOT to be ready */
+ if (idma_is_valid(in_dma)) {
+ ipu_clear_buffer_ready(channel, IPU_VIDEO_IN_BUFFER, 0);
+ ipu_clear_buffer_ready(channel, IPU_VIDEO_IN_BUFFER, 1);
+ }
+ if (idma_is_valid(out_dma)) {
+ ipu_clear_buffer_ready(channel, IPU_OUTPUT_BUFFER, 0);
+ ipu_clear_buffer_ready(channel, IPU_OUTPUT_BUFFER, 1);
+ }
+
+ return 0;
+}
+
+uint32_t bytes_per_pixel(uint32_t fmt)
+{
+ switch (fmt) {
+ case IPU_PIX_FMT_GENERIC: /*generic data */
+ case IPU_PIX_FMT_RGB332:
+ case IPU_PIX_FMT_YUV420P:
+ case IPU_PIX_FMT_YUV422P:
+ return 1;
+ break;
+ case IPU_PIX_FMT_RGB565:
+ case IPU_PIX_FMT_YUYV:
+ case IPU_PIX_FMT_UYVY:
+ return 2;
+ break;
+ case IPU_PIX_FMT_BGR24:
+ case IPU_PIX_FMT_RGB24:
+ return 3;
+ break;
+ case IPU_PIX_FMT_GENERIC_32: /*generic data */
+ case IPU_PIX_FMT_BGR32:
+ case IPU_PIX_FMT_BGRA32:
+ case IPU_PIX_FMT_RGB32:
+ case IPU_PIX_FMT_RGBA32:
+ case IPU_PIX_FMT_ABGR32:
+ return 4;
+ break;
+ default:
+ return 1;
+ break;
+ }
+ return 0;
+}
+
+ipu_color_space_t format_to_colorspace(uint32_t fmt)
+{
+ switch (fmt) {
+ case IPU_PIX_FMT_RGB666:
+ case IPU_PIX_FMT_RGB565:
+ case IPU_PIX_FMT_BGR24:
+ case IPU_PIX_FMT_RGB24:
+ case IPU_PIX_FMT_BGR32:
+ case IPU_PIX_FMT_BGRA32:
+ case IPU_PIX_FMT_RGB32:
+ case IPU_PIX_FMT_RGBA32:
+ case IPU_PIX_FMT_ABGR32:
+ case IPU_PIX_FMT_LVDS666:
+ case IPU_PIX_FMT_LVDS888:
+ return RGB;
+ break;
+
+ default:
+ return YCbCr;
+ break;
+ }
+ return RGB;
+}
--- /dev/null
+/*
+ * Porting to u-boot:
+ *
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de
+ *
+ * Linux IPU driver for MX51:
+ *
+ * (C) Copyright 2005-2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* #define DEBUG */
+
+#include <common.h>
+#include <linux/types.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include "ipu.h"
+#include "ipu_regs.h"
+
+enum csc_type_t {
+ RGB2YUV = 0,
+ YUV2RGB,
+ RGB2RGB,
+ YUV2YUV,
+ CSC_NONE,
+ CSC_NUM
+};
+
+struct dp_csc_param_t {
+ int mode;
+ void *coeff;
+};
+
+#define SYNC_WAVE 0
+
+/* DC display ID assignments */
+#define DC_DISP_ID_SYNC(di) (di)
+#define DC_DISP_ID_SERIAL 2
+#define DC_DISP_ID_ASYNC 3
+
+int dmfc_type_setup;
+static int dmfc_size_28, dmfc_size_29, dmfc_size_24, dmfc_size_27, dmfc_size_23;
+int g_di1_tvout;
+
+extern struct clk *g_ipu_clk;
+extern struct clk *g_di_clk[2];
+extern struct clk *g_pixel_clk[2];
+
+extern unsigned char g_ipu_clk_enabled;
+extern unsigned char g_dc_di_assignment[];
+
+void ipu_dmfc_init(int dmfc_type, int first)
+{
+ u32 dmfc_wr_chan, dmfc_dp_chan;
+
+ if (first) {
+ if (dmfc_type_setup > dmfc_type)
+ dmfc_type = dmfc_type_setup;
+ else
+ dmfc_type_setup = dmfc_type;
+
+ /* disable DMFC-IC channel*/
+ __raw_writel(0x2, DMFC_IC_CTRL);
+ } else if (dmfc_type_setup >= DMFC_HIGH_RESOLUTION_DC) {
+ printf("DMFC high resolution has set, will not change\n");
+ return;
+ } else
+ dmfc_type_setup = dmfc_type;
+
+ if (dmfc_type == DMFC_HIGH_RESOLUTION_DC) {
+ /* 1 - segment 0~3;
+ * 5B - segement 4, 5;
+ * 5F - segement 6, 7;
+ * 1C, 2C and 6B, 6F unused;
+ */
+ debug("IPU DMFC DC HIGH RES: 1(0~3), 5B(4,5), 5F(6,7)\n");
+ dmfc_wr_chan = 0x00000088;
+ dmfc_dp_chan = 0x00009694;
+ dmfc_size_28 = 256 * 4;
+ dmfc_size_29 = 0;
+ dmfc_size_24 = 0;
+ dmfc_size_27 = 128 * 4;
+ dmfc_size_23 = 128 * 4;
+ } else if (dmfc_type == DMFC_HIGH_RESOLUTION_DP) {
+ /* 1 - segment 0, 1;
+ * 5B - segement 2~5;
+ * 5F - segement 6,7;
+ * 1C, 2C and 6B, 6F unused;
+ */
+ debug("IPU DMFC DP HIGH RES: 1(0,1), 5B(2~5), 5F(6,7)\n");
+ dmfc_wr_chan = 0x00000090;
+ dmfc_dp_chan = 0x0000968a;
+ dmfc_size_28 = 128 * 4;
+ dmfc_size_29 = 0;
+ dmfc_size_24 = 0;
+ dmfc_size_27 = 128 * 4;
+ dmfc_size_23 = 256 * 4;
+ } else if (dmfc_type == DMFC_HIGH_RESOLUTION_ONLY_DP) {
+ /* 5B - segement 0~3;
+ * 5F - segement 4~7;
+ * 1, 1C, 2C and 6B, 6F unused;
+ */
+ debug("IPU DMFC ONLY-DP HIGH RES: 5B(0~3), 5F(4~7)\n");
+ dmfc_wr_chan = 0x00000000;
+ dmfc_dp_chan = 0x00008c88;
+ dmfc_size_28 = 0;
+ dmfc_size_29 = 0;
+ dmfc_size_24 = 0;
+ dmfc_size_27 = 256 * 4;
+ dmfc_size_23 = 256 * 4;
+ } else {
+ /* 1 - segment 0, 1;
+ * 5B - segement 4, 5;
+ * 5F - segement 6, 7;
+ * 1C, 2C and 6B, 6F unused;
+ */
+ debug("IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)\n");
+ dmfc_wr_chan = 0x00000090;
+ dmfc_dp_chan = 0x00009694;
+ dmfc_size_28 = 128 * 4;
+ dmfc_size_29 = 0;
+ dmfc_size_24 = 0;
+ dmfc_size_27 = 128 * 4;
+ dmfc_size_23 = 128 * 4;
+ }
+ __raw_writel(dmfc_wr_chan, DMFC_WR_CHAN);
+ __raw_writel(0x202020F6, DMFC_WR_CHAN_DEF);
+ __raw_writel(dmfc_dp_chan, DMFC_DP_CHAN);
+ /* Enable chan 5 watermark set at 5 bursts and clear at 7 bursts */
+ __raw_writel(0x2020F6F6, DMFC_DP_CHAN_DEF);
+}
+
+void ipu_dmfc_set_wait4eot(int dma_chan, int width)
+{
+ u32 dmfc_gen1 = __raw_readl(DMFC_GENERAL1);
+
+ if (width >= HIGH_RESOLUTION_WIDTH) {
+ if (dma_chan == 23)
+ ipu_dmfc_init(DMFC_HIGH_RESOLUTION_DP, 0);
+ else if (dma_chan == 28)
+ ipu_dmfc_init(DMFC_HIGH_RESOLUTION_DC, 0);
+ }
+
+ if (dma_chan == 23) { /*5B*/
+ if (dmfc_size_23 / width > 3)
+ dmfc_gen1 |= 1UL << 20;
+ else
+ dmfc_gen1 &= ~(1UL << 20);
+ } else if (dma_chan == 24) { /*6B*/
+ if (dmfc_size_24 / width > 1)
+ dmfc_gen1 |= 1UL << 22;
+ else
+ dmfc_gen1 &= ~(1UL << 22);
+ } else if (dma_chan == 27) { /*5F*/
+ if (dmfc_size_27 / width > 2)
+ dmfc_gen1 |= 1UL << 21;
+ else
+ dmfc_gen1 &= ~(1UL << 21);
+ } else if (dma_chan == 28) { /*1*/
+ if (dmfc_size_28 / width > 2)
+ dmfc_gen1 |= 1UL << 16;
+ else
+ dmfc_gen1 &= ~(1UL << 16);
+ } else if (dma_chan == 29) { /*6F*/
+ if (dmfc_size_29 / width > 1)
+ dmfc_gen1 |= 1UL << 23;
+ else
+ dmfc_gen1 &= ~(1UL << 23);
+ }
+
+ __raw_writel(dmfc_gen1, DMFC_GENERAL1);
+}
+
+static void ipu_di_data_wave_config(int di,
+ int wave_gen,
+ int access_size, int component_size)
+{
+ u32 reg;
+ reg = (access_size << DI_DW_GEN_ACCESS_SIZE_OFFSET) |
+ (component_size << DI_DW_GEN_COMPONENT_SIZE_OFFSET);
+ __raw_writel(reg, DI_DW_GEN(di, wave_gen));
+}
+
+static void ipu_di_data_pin_config(int di, int wave_gen, int di_pin, int set,
+ int up, int down)
+{
+ u32 reg;
+
+ reg = __raw_readl(DI_DW_GEN(di, wave_gen));
+ reg &= ~(0x3 << (di_pin * 2));
+ reg |= set << (di_pin * 2);
+ __raw_writel(reg, DI_DW_GEN(di, wave_gen));
+
+ __raw_writel((down << 16) | up, DI_DW_SET(di, wave_gen, set));
+}
+
+static void ipu_di_sync_config(int di, int wave_gen,
+ int run_count, int run_src,
+ int offset_count, int offset_src,
+ int repeat_count, int cnt_clr_src,
+ int cnt_polarity_gen_en,
+ int cnt_polarity_clr_src,
+ int cnt_polarity_trigger_src,
+ int cnt_up, int cnt_down)
+{
+ u32 reg;
+
+ if ((run_count >= 0x1000) || (offset_count >= 0x1000) ||
+ (repeat_count >= 0x1000) ||
+ (cnt_up >= 0x400) || (cnt_down >= 0x400)) {
+ printf("DI%d counters out of range.\n", di);
+ return;
+ }
+
+ reg = (run_count << 19) | (++run_src << 16) |
+ (offset_count << 3) | ++offset_src;
+ __raw_writel(reg, DI_SW_GEN0(di, wave_gen));
+ reg = (cnt_polarity_gen_en << 29) | (++cnt_clr_src << 25) |
+ (++cnt_polarity_trigger_src << 12) | (++cnt_polarity_clr_src << 9);
+ reg |= (cnt_down << 16) | cnt_up;
+ if (repeat_count == 0) {
+ /* Enable auto reload */
+ reg |= 0x10000000;
+ }
+ __raw_writel(reg, DI_SW_GEN1(di, wave_gen));
+ reg = __raw_readl(DI_STP_REP(di, wave_gen));
+ reg &= ~(0xFFFF << (16 * ((wave_gen - 1) & 0x1)));
+ reg |= repeat_count << (16 * ((wave_gen - 1) & 0x1));
+ __raw_writel(reg, DI_STP_REP(di, wave_gen));
+}
+
+static void ipu_dc_map_config(int map, int byte_num, int offset, int mask)
+{
+ int ptr = map * 3 + byte_num;
+ u32 reg;
+
+ reg = __raw_readl(DC_MAP_CONF_VAL(ptr));
+ reg &= ~(0xFFFF << (16 * (ptr & 0x1)));
+ reg |= ((offset << 8) | mask) << (16 * (ptr & 0x1));
+ __raw_writel(reg, DC_MAP_CONF_VAL(ptr));
+
+ reg = __raw_readl(DC_MAP_CONF_PTR(map));
+ reg &= ~(0x1F << ((16 * (map & 0x1)) + (5 * byte_num)));
+ reg |= ptr << ((16 * (map & 0x1)) + (5 * byte_num));
+ __raw_writel(reg, DC_MAP_CONF_PTR(map));
+}
+
+static void ipu_dc_map_clear(int map)
+{
+ u32 reg = __raw_readl(DC_MAP_CONF_PTR(map));
+ __raw_writel(reg & ~(0xFFFF << (16 * (map & 0x1))),
+ DC_MAP_CONF_PTR(map));
+}
+
+static void ipu_dc_write_tmpl(int word, u32 opcode, u32 operand, int map,
+ int wave, int glue, int sync)
+{
+ u32 reg;
+ int stop = 1;
+
+ reg = sync;
+ reg |= (glue << 4);
+ reg |= (++wave << 11);
+ reg |= (++map << 15);
+ reg |= (operand << 20) & 0xFFF00000;
+ __raw_writel(reg, ipu_dc_tmpl_reg + word * 2);
+
+ reg = (operand >> 12);
+ reg |= opcode << 4;
+ reg |= (stop << 9);
+ __raw_writel(reg, ipu_dc_tmpl_reg + word * 2 + 1);
+}
+
+static void ipu_dc_link_event(int chan, int event, int addr, int priority)
+{
+ u32 reg;
+
+ reg = __raw_readl(DC_RL_CH(chan, event));
+ reg &= ~(0xFFFF << (16 * (event & 0x1)));
+ reg |= ((addr << 8) | priority) << (16 * (event & 0x1));
+ __raw_writel(reg, DC_RL_CH(chan, event));
+}
+
+/* Y = R * 1.200 + G * 2.343 + B * .453 + 0.250;
+ * U = R * -.672 + G * -1.328 + B * 2.000 + 512.250.;
+ * V = R * 2.000 + G * -1.672 + B * -.328 + 512.250.;
+ */
+static const int rgb2ycbcr_coeff[5][3] = {
+ {0x4D, 0x96, 0x1D},
+ {0x3D5, 0x3AB, 0x80},
+ {0x80, 0x395, 0x3EB},
+ {0x0000, 0x0200, 0x0200}, /* B0, B1, B2 */
+ {0x2, 0x2, 0x2}, /* S0, S1, S2 */
+};
+
+/* R = (1.164 * (Y - 16)) + (1.596 * (Cr - 128));
+ * G = (1.164 * (Y - 16)) - (0.392 * (Cb - 128)) - (0.813 * (Cr - 128));
+ * B = (1.164 * (Y - 16)) + (2.017 * (Cb - 128);
+ */
+static const int ycbcr2rgb_coeff[5][3] = {
+ {0x095, 0x000, 0x0CC},
+ {0x095, 0x3CE, 0x398},
+ {0x095, 0x0FF, 0x000},
+ {0x3E42, 0x010A, 0x3DD6}, /*B0,B1,B2 */
+ {0x1, 0x1, 0x1}, /*S0,S1,S2 */
+};
+
+#define mask_a(a) ((u32)(a) & 0x3FF)
+#define mask_b(b) ((u32)(b) & 0x3FFF)
+
+/* Pls keep S0, S1 and S2 as 0x2 by using this convertion */
+static int rgb_to_yuv(int n, int red, int green, int blue)
+{
+ int c;
+ c = red * rgb2ycbcr_coeff[n][0];
+ c += green * rgb2ycbcr_coeff[n][1];
+ c += blue * rgb2ycbcr_coeff[n][2];
+ c /= 16;
+ c += rgb2ycbcr_coeff[3][n] * 4;
+ c += 8;
+ c /= 16;
+ if (c < 0)
+ c = 0;
+ if (c > 255)
+ c = 255;
+ return c;
+}
+
+/*
+ * Row is for BG: RGB2YUV YUV2RGB RGB2RGB YUV2YUV CSC_NONE
+ * Column is for FG: RGB2YUV YUV2RGB RGB2RGB YUV2YUV CSC_NONE
+ */
+static struct dp_csc_param_t dp_csc_array[CSC_NUM][CSC_NUM] = {
+ {
+ {DP_COM_CONF_CSC_DEF_BOTH, &rgb2ycbcr_coeff},
+ {0, 0},
+ {0, 0},
+ {DP_COM_CONF_CSC_DEF_BG, &rgb2ycbcr_coeff},
+ {DP_COM_CONF_CSC_DEF_BG, &rgb2ycbcr_coeff}
+ },
+ {
+ {0, 0},
+ {DP_COM_CONF_CSC_DEF_BOTH, &ycbcr2rgb_coeff},
+ {DP_COM_CONF_CSC_DEF_BG, &ycbcr2rgb_coeff},
+ {0, 0},
+ {DP_COM_CONF_CSC_DEF_BG, &ycbcr2rgb_coeff}
+ },
+ {
+ {0, 0},
+ {DP_COM_CONF_CSC_DEF_FG, &ycbcr2rgb_coeff},
+ {0, 0},
+ {0, 0},
+ {0, 0}
+ },
+ {
+ {DP_COM_CONF_CSC_DEF_FG, &rgb2ycbcr_coeff},
+ {0, 0},
+ {0, 0},
+ {0, 0},
+ {0, 0}
+ },
+ {
+ {DP_COM_CONF_CSC_DEF_FG, &rgb2ycbcr_coeff},
+ {DP_COM_CONF_CSC_DEF_FG, &ycbcr2rgb_coeff},
+ {0, 0},
+ {0, 0},
+ {0, 0}
+ }
+};
+
+static enum csc_type_t fg_csc_type = CSC_NONE, bg_csc_type = CSC_NONE;
+static int color_key_4rgb = 1;
+
+void ipu_dp_csc_setup(int dp, struct dp_csc_param_t dp_csc_param,
+ unsigned char srm_mode_update)
+{
+ u32 reg;
+ const int (*coeff)[5][3];
+
+ if (dp_csc_param.mode >= 0) {
+ reg = __raw_readl(DP_COM_CONF(dp));
+ reg &= ~DP_COM_CONF_CSC_DEF_MASK;
+ reg |= dp_csc_param.mode;
+ __raw_writel(reg, DP_COM_CONF(dp));
+ }
+
+ coeff = dp_csc_param.coeff;
+
+ if (coeff) {
+ __raw_writel(mask_a((*coeff)[0][0]) |
+ (mask_a((*coeff)[0][1]) << 16), DP_CSC_A_0(dp));
+ __raw_writel(mask_a((*coeff)[0][2]) |
+ (mask_a((*coeff)[1][0]) << 16), DP_CSC_A_1(dp));
+ __raw_writel(mask_a((*coeff)[1][1]) |
+ (mask_a((*coeff)[1][2]) << 16), DP_CSC_A_2(dp));
+ __raw_writel(mask_a((*coeff)[2][0]) |
+ (mask_a((*coeff)[2][1]) << 16), DP_CSC_A_3(dp));
+ __raw_writel(mask_a((*coeff)[2][2]) |
+ (mask_b((*coeff)[3][0]) << 16) |
+ ((*coeff)[4][0] << 30), DP_CSC_0(dp));
+ __raw_writel(mask_b((*coeff)[3][1]) | ((*coeff)[4][1] << 14) |
+ (mask_b((*coeff)[3][2]) << 16) |
+ ((*coeff)[4][2] << 30), DP_CSC_1(dp));
+ }
+
+ if (srm_mode_update) {
+ reg = __raw_readl(IPU_SRM_PRI2) | 0x8;
+ __raw_writel(reg, IPU_SRM_PRI2);
+ }
+}
+
+int ipu_dp_init(ipu_channel_t channel, uint32_t in_pixel_fmt,
+ uint32_t out_pixel_fmt)
+{
+ int in_fmt, out_fmt;
+ int dp;
+ int partial = 0;
+ uint32_t reg;
+
+ if (channel == MEM_FG_SYNC) {
+ dp = DP_SYNC;
+ partial = 1;
+ } else if (channel == MEM_BG_SYNC) {
+ dp = DP_SYNC;
+ partial = 0;
+ } else if (channel == MEM_BG_ASYNC0) {
+ dp = DP_ASYNC0;
+ partial = 0;
+ } else {
+ return -EINVAL;
+ }
+
+ in_fmt = format_to_colorspace(in_pixel_fmt);
+ out_fmt = format_to_colorspace(out_pixel_fmt);
+
+ if (partial) {
+ if (in_fmt == RGB) {
+ if (out_fmt == RGB)
+ fg_csc_type = RGB2RGB;
+ else
+ fg_csc_type = RGB2YUV;
+ } else {
+ if (out_fmt == RGB)
+ fg_csc_type = YUV2RGB;
+ else
+ fg_csc_type = YUV2YUV;
+ }
+ } else {
+ if (in_fmt == RGB) {
+ if (out_fmt == RGB)
+ bg_csc_type = RGB2RGB;
+ else
+ bg_csc_type = RGB2YUV;
+ } else {
+ if (out_fmt == RGB)
+ bg_csc_type = YUV2RGB;
+ else
+ bg_csc_type = YUV2YUV;
+ }
+ }
+
+ /* Transform color key from rgb to yuv if CSC is enabled */
+ reg = __raw_readl(DP_COM_CONF(dp));
+ if (color_key_4rgb && (reg & DP_COM_CONF_GWCKE) &&
+ (((fg_csc_type == RGB2YUV) && (bg_csc_type == YUV2YUV)) ||
+ ((fg_csc_type == YUV2YUV) && (bg_csc_type == RGB2YUV)) ||
+ ((fg_csc_type == YUV2YUV) && (bg_csc_type == YUV2YUV)) ||
+ ((fg_csc_type == YUV2RGB) && (bg_csc_type == YUV2RGB)))) {
+ int red, green, blue;
+ int y, u, v;
+ uint32_t color_key = __raw_readl(DP_GRAPH_WIND_CTRL(dp)) &
+ 0xFFFFFFL;
+
+ debug("_ipu_dp_init color key 0x%x need change to yuv fmt!\n",
+ color_key);
+
+ red = (color_key >> 16) & 0xFF;
+ green = (color_key >> 8) & 0xFF;
+ blue = color_key & 0xFF;
+
+ y = rgb_to_yuv(0, red, green, blue);
+ u = rgb_to_yuv(1, red, green, blue);
+ v = rgb_to_yuv(2, red, green, blue);
+ color_key = (y << 16) | (u << 8) | v;
+
+ reg = __raw_readl(DP_GRAPH_WIND_CTRL(dp)) & 0xFF000000L;
+ __raw_writel(reg | color_key, DP_GRAPH_WIND_CTRL(dp));
+ color_key_4rgb = 0;
+
+ debug("_ipu_dp_init color key change to yuv fmt 0x%x!\n",
+ color_key);
+ }
+
+ ipu_dp_csc_setup(dp, dp_csc_array[bg_csc_type][fg_csc_type], 1);
+
+ return 0;
+}
+
+void ipu_dp_uninit(ipu_channel_t channel)
+{
+ int dp;
+ int partial = 0;
+
+ if (channel == MEM_FG_SYNC) {
+ dp = DP_SYNC;
+ partial = 1;
+ } else if (channel == MEM_BG_SYNC) {
+ dp = DP_SYNC;
+ partial = 0;
+ } else if (channel == MEM_BG_ASYNC0) {
+ dp = DP_ASYNC0;
+ partial = 0;
+ } else {
+ return;
+ }
+
+ if (partial)
+ fg_csc_type = CSC_NONE;
+ else
+ bg_csc_type = CSC_NONE;
+
+ ipu_dp_csc_setup(dp, dp_csc_array[bg_csc_type][fg_csc_type], 0);
+}
+
+void ipu_dc_init(int dc_chan, int di, unsigned char interlaced)
+{
+ u32 reg = 0;
+
+ if ((dc_chan == 1) || (dc_chan == 5)) {
+ if (interlaced) {
+ ipu_dc_link_event(dc_chan, DC_EVT_NL, 0, 3);
+ ipu_dc_link_event(dc_chan, DC_EVT_EOL, 0, 2);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, 0, 1);
+ } else {
+ if (di) {
+ ipu_dc_link_event(dc_chan, DC_EVT_NL, 2, 3);
+ ipu_dc_link_event(dc_chan, DC_EVT_EOL, 3, 2);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA,
+ 4, 1);
+ } else {
+ ipu_dc_link_event(dc_chan, DC_EVT_NL, 5, 3);
+ ipu_dc_link_event(dc_chan, DC_EVT_EOL, 6, 2);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA,
+ 7, 1);
+ }
+ }
+ ipu_dc_link_event(dc_chan, DC_EVT_NF, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NFIELD, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_EOF, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_EOFIELD, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR, 0, 0);
+
+ reg = 0x2;
+ reg |= DC_DISP_ID_SYNC(di) << DC_WR_CH_CONF_PROG_DISP_ID_OFFSET;
+ reg |= di << 2;
+ if (interlaced)
+ reg |= DC_WR_CH_CONF_FIELD_MODE;
+ } else if ((dc_chan == 8) || (dc_chan == 9)) {
+ /* async channels */
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_0, 0x64, 1);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_1, 0x64, 1);
+
+ reg = 0x3;
+ reg |= DC_DISP_ID_SERIAL << DC_WR_CH_CONF_PROG_DISP_ID_OFFSET;
+ }
+ __raw_writel(reg, DC_WR_CH_CONF(dc_chan));
+
+ __raw_writel(0x00000000, DC_WR_CH_ADDR(dc_chan));
+
+ __raw_writel(0x00000084, DC_GEN);
+}
+
+void ipu_dc_uninit(int dc_chan)
+{
+ if ((dc_chan == 1) || (dc_chan == 5)) {
+ ipu_dc_link_event(dc_chan, DC_EVT_NL, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_EOL, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NF, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NFIELD, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_EOF, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_EOFIELD, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR, 0, 0);
+ } else if ((dc_chan == 8) || (dc_chan == 9)) {
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_W_0, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_W_1, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_W_0, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_W_1, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_0, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_1, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_R_0, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_R_1, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_R_0, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_R_1, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_R_0, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_R_1, 0, 0);
+ }
+}
+
+int ipu_chan_is_interlaced(ipu_channel_t channel)
+{
+ if (channel == MEM_DC_SYNC)
+ return !!(__raw_readl(DC_WR_CH_CONF_1) &
+ DC_WR_CH_CONF_FIELD_MODE);
+ else if ((channel == MEM_BG_SYNC) || (channel == MEM_FG_SYNC))
+ return !!(__raw_readl(DC_WR_CH_CONF_5) &
+ DC_WR_CH_CONF_FIELD_MODE);
+ return 0;
+}
+
+void ipu_dp_dc_enable(ipu_channel_t channel)
+{
+ int di;
+ uint32_t reg;
+ uint32_t dc_chan;
+
+ if (channel == MEM_FG_SYNC)
+ dc_chan = 5;
+ if (channel == MEM_DC_SYNC)
+ dc_chan = 1;
+ else if (channel == MEM_BG_SYNC)
+ dc_chan = 5;
+ else
+ return;
+
+ if (channel == MEM_FG_SYNC) {
+ /* Enable FG channel */
+ reg = __raw_readl(DP_COM_CONF(DP_SYNC));
+ __raw_writel(reg | DP_COM_CONF_FG_EN, DP_COM_CONF(DP_SYNC));
+
+ reg = __raw_readl(IPU_SRM_PRI2) | 0x8;
+ __raw_writel(reg, IPU_SRM_PRI2);
+ return;
+ }
+
+ di = g_dc_di_assignment[dc_chan];
+
+ /* Make sure other DC sync channel is not assigned same DI */
+ reg = __raw_readl(DC_WR_CH_CONF(6 - dc_chan));
+ if ((di << 2) == (reg & DC_WR_CH_CONF_PROG_DI_ID)) {
+ reg &= ~DC_WR_CH_CONF_PROG_DI_ID;
+ reg |= di ? 0 : DC_WR_CH_CONF_PROG_DI_ID;
+ __raw_writel(reg, DC_WR_CH_CONF(6 - dc_chan));
+ }
+
+ reg = __raw_readl(DC_WR_CH_CONF(dc_chan));
+ reg |= 4 << DC_WR_CH_CONF_PROG_TYPE_OFFSET;
+ __raw_writel(reg, DC_WR_CH_CONF(dc_chan));
+
+ clk_enable(g_pixel_clk[di]);
+}
+
+static unsigned char dc_swap;
+
+void ipu_dp_dc_disable(ipu_channel_t channel, unsigned char swap)
+{
+ uint32_t reg;
+ uint32_t csc;
+ uint32_t dc_chan = 0;
+ int timeout = 50;
+
+ dc_swap = swap;
+
+ if (channel == MEM_DC_SYNC) {
+ dc_chan = 1;
+ } else if (channel == MEM_BG_SYNC) {
+ dc_chan = 5;
+ } else if (channel == MEM_FG_SYNC) {
+ /* Disable FG channel */
+ dc_chan = 5;
+
+ reg = __raw_readl(DP_COM_CONF(DP_SYNC));
+ csc = reg & DP_COM_CONF_CSC_DEF_MASK;
+ if (csc == DP_COM_CONF_CSC_DEF_FG)
+ reg &= ~DP_COM_CONF_CSC_DEF_MASK;
+
+ reg &= ~DP_COM_CONF_FG_EN;
+ __raw_writel(reg, DP_COM_CONF(DP_SYNC));
+
+ reg = __raw_readl(IPU_SRM_PRI2) | 0x8;
+ __raw_writel(reg, IPU_SRM_PRI2);
+
+ timeout = 50;
+
+ /*
+ * Wait for DC triple buffer to empty,
+ * this check is useful for tv overlay.
+ */
+ if (g_dc_di_assignment[dc_chan] == 0)
+ while ((__raw_readl(DC_STAT) & 0x00000002)
+ != 0x00000002) {
+ udelay(2000);
+ timeout -= 2;
+ if (timeout <= 0)
+ break;
+ }
+ else if (g_dc_di_assignment[dc_chan] == 1)
+ while ((__raw_readl(DC_STAT) & 0x00000020)
+ != 0x00000020) {
+ udelay(2000);
+ timeout -= 2;
+ if (timeout <= 0)
+ break;
+ }
+ return;
+ } else {
+ return;
+ }
+
+ if (dc_swap) {
+ /* Swap DC channel 1 and 5 settings, and disable old dc chan */
+ reg = __raw_readl(DC_WR_CH_CONF(dc_chan));
+ __raw_writel(reg, DC_WR_CH_CONF(6 - dc_chan));
+ reg &= ~DC_WR_CH_CONF_PROG_TYPE_MASK;
+ reg ^= DC_WR_CH_CONF_PROG_DI_ID;
+ __raw_writel(reg, DC_WR_CH_CONF(dc_chan));
+ } else {
+ timeout = 50;
+
+ /* Wait for DC triple buffer to empty */
+ if (g_dc_di_assignment[dc_chan] == 0)
+ while ((__raw_readl(DC_STAT) & 0x00000002)
+ != 0x00000002) {
+ udelay(2000);
+ timeout -= 2;
+ if (timeout <= 0)
+ break;
+ }
+ else if (g_dc_di_assignment[dc_chan] == 1)
+ while ((__raw_readl(DC_STAT) & 0x00000020)
+ != 0x00000020) {
+ udelay(2000);
+ timeout -= 2;
+ if (timeout <= 0)
+ break;
+ }
+
+ reg = __raw_readl(DC_WR_CH_CONF(dc_chan));
+ reg &= ~DC_WR_CH_CONF_PROG_TYPE_MASK;
+ __raw_writel(reg, DC_WR_CH_CONF(dc_chan));
+
+ reg = __raw_readl(IPU_DISP_GEN);
+ if (g_dc_di_assignment[dc_chan])
+ reg &= ~DI1_COUNTER_RELEASE;
+ else
+ reg &= ~DI0_COUNTER_RELEASE;
+ __raw_writel(reg, IPU_DISP_GEN);
+
+ /* Clock is already off because it must be done quickly, but
+ we need to fix the ref count */
+ clk_disable(g_pixel_clk[g_dc_di_assignment[dc_chan]]);
+ }
+}
+
+void ipu_init_dc_mappings(void)
+{
+ /* IPU_PIX_FMT_RGB24 */
+ ipu_dc_map_clear(0);
+ ipu_dc_map_config(0, 0, 7, 0xFF);
+ ipu_dc_map_config(0, 1, 15, 0xFF);
+ ipu_dc_map_config(0, 2, 23, 0xFF);
+
+ /* IPU_PIX_FMT_RGB666 */
+ ipu_dc_map_clear(1);
+ ipu_dc_map_config(1, 0, 5, 0xFC);
+ ipu_dc_map_config(1, 1, 11, 0xFC);
+ ipu_dc_map_config(1, 2, 17, 0xFC);
+
+ /* IPU_PIX_FMT_YUV444 */
+ ipu_dc_map_clear(2);
+ ipu_dc_map_config(2, 0, 15, 0xFF);
+ ipu_dc_map_config(2, 1, 23, 0xFF);
+ ipu_dc_map_config(2, 2, 7, 0xFF);
+
+ /* IPU_PIX_FMT_RGB565 */
+ ipu_dc_map_clear(3);
+ ipu_dc_map_config(3, 0, 4, 0xF8);
+ ipu_dc_map_config(3, 1, 10, 0xFC);
+ ipu_dc_map_config(3, 2, 15, 0xF8);
+
+ /* IPU_PIX_FMT_LVDS666 */
+ ipu_dc_map_clear(4);
+ ipu_dc_map_config(4, 0, 5, 0xFC);
+ ipu_dc_map_config(4, 1, 13, 0xFC);
+ ipu_dc_map_config(4, 2, 21, 0xFC);
+}
+
+int ipu_pixfmt_to_map(uint32_t fmt)
+{
+ switch (fmt) {
+ case IPU_PIX_FMT_GENERIC:
+ case IPU_PIX_FMT_RGB24:
+ return 0;
+ case IPU_PIX_FMT_RGB666:
+ return 1;
+ case IPU_PIX_FMT_YUV444:
+ return 2;
+ case IPU_PIX_FMT_RGB565:
+ return 3;
+ case IPU_PIX_FMT_LVDS666:
+ return 4;
+ }
+
+ return -1;
+}
+
+/*
+ * This function is called to adapt synchronous LCD panel to IPU restriction.
+ */
+void adapt_panel_to_ipu_restricitions(uint32_t *pixel_clk,
+ uint16_t width, uint16_t height,
+ uint16_t h_start_width,
+ uint16_t h_end_width,
+ uint16_t v_start_width,
+ uint16_t *v_end_width)
+{
+ if (*v_end_width < 2) {
+ uint16_t total_width = width + h_start_width + h_end_width;
+ uint16_t total_height_old = height + v_start_width +
+ (*v_end_width);
+ uint16_t total_height_new = height + v_start_width + 2;
+ *v_end_width = 2;
+ *pixel_clk = (*pixel_clk) * total_width * total_height_new /
+ (total_width * total_height_old);
+ printf("WARNING: adapt panel end blank lines\n");
+ }
+}
+
+/*
+ * This function is called to initialize a synchronous LCD panel.
+ *
+ * @param disp The DI the panel is attached to.
+ *
+ * @param pixel_clk Desired pixel clock frequency in Hz.
+ *
+ * @param pixel_fmt Input parameter for pixel format of buffer.
+ * Pixel format is a FOURCC ASCII code.
+ *
+ * @param width The width of panel in pixels.
+ *
+ * @param height The height of panel in pixels.
+ *
+ * @param hStartWidth The number of pixel clocks between the HSYNC
+ * signal pulse and the start of valid data.
+ *
+ * @param hSyncWidth The width of the HSYNC signal in units of pixel
+ * clocks.
+ *
+ * @param hEndWidth The number of pixel clocks between the end of
+ * valid data and the HSYNC signal for next line.
+ *
+ * @param vStartWidth The number of lines between the VSYNC
+ * signal pulse and the start of valid data.
+ *
+ * @param vSyncWidth The width of the VSYNC signal in units of lines
+ *
+ * @param vEndWidth The number of lines between the end of valid
+ * data and the VSYNC signal for next frame.
+ *
+ * @param sig Bitfield of signal polarities for LCD interface.
+ *
+ * @return This function returns 0 on success or negative error code on
+ * fail.
+ */
+
+int32_t ipu_init_sync_panel(int disp, uint32_t pixel_clk,
+ uint16_t width, uint16_t height,
+ uint32_t pixel_fmt,
+ uint16_t h_start_width, uint16_t h_sync_width,
+ uint16_t h_end_width, uint16_t v_start_width,
+ uint16_t v_sync_width, uint16_t v_end_width,
+ uint32_t v_to_h_sync, ipu_di_signal_cfg_t sig)
+{
+ uint32_t reg;
+ uint32_t di_gen, vsync_cnt;
+ uint32_t div, rounded_pixel_clk;
+ uint32_t h_total, v_total;
+ int map;
+ struct clk *di_parent;
+
+ debug("panel size = %d x %d\n", width, height);
+
+ if ((v_sync_width == 0) || (h_sync_width == 0))
+ return EINVAL;
+
+ adapt_panel_to_ipu_restricitions(&pixel_clk, width, height,
+ h_start_width, h_end_width,
+ v_start_width, &v_end_width);
+ h_total = width + h_sync_width + h_start_width + h_end_width;
+ v_total = height + v_sync_width + v_start_width + v_end_width;
+
+ /* Init clocking */
+ debug("pixel clk = %d\n", pixel_clk);
+
+ if (sig.ext_clk) {
+ if (!(g_di1_tvout && (disp == 1))) { /*not round div for tvout*/
+ /*
+ * Set the PLL to be an even multiple
+ * of the pixel clock.
+ */
+ if ((clk_get_usecount(g_pixel_clk[0]) == 0) &&
+ (clk_get_usecount(g_pixel_clk[1]) == 0)) {
+ di_parent = clk_get_parent(g_di_clk[disp]);
+ rounded_pixel_clk =
+ clk_round_rate(g_pixel_clk[disp],
+ pixel_clk);
+ div = clk_get_rate(di_parent) /
+ rounded_pixel_clk;
+ if (div % 2)
+ div++;
+ if (clk_get_rate(di_parent) != div *
+ rounded_pixel_clk)
+ clk_set_rate(di_parent,
+ div * rounded_pixel_clk);
+ udelay(10000);
+ clk_set_rate(g_di_clk[disp],
+ 2 * rounded_pixel_clk);
+ udelay(10000);
+ }
+ }
+ clk_set_parent(g_pixel_clk[disp], g_di_clk[disp]);
+ } else {
+ if (clk_get_usecount(g_pixel_clk[disp]) != 0)
+ clk_set_parent(g_pixel_clk[disp], g_ipu_clk);
+ }
+ rounded_pixel_clk = clk_round_rate(g_pixel_clk[disp], pixel_clk);
+ clk_set_rate(g_pixel_clk[disp], rounded_pixel_clk);
+ udelay(5000);
+ /* Get integer portion of divider */
+ div = clk_get_rate(clk_get_parent(g_pixel_clk[disp])) /
+ rounded_pixel_clk;
+
+ ipu_di_data_wave_config(disp, SYNC_WAVE, div - 1, div - 1);
+ ipu_di_data_pin_config(disp, SYNC_WAVE, DI_PIN15, 3, 0, div * 2);
+
+ map = ipu_pixfmt_to_map(pixel_fmt);
+ if (map < 0) {
+ debug("IPU_DISP: No MAP\n");
+ return -EINVAL;
+ }
+
+ di_gen = __raw_readl(DI_GENERAL(disp));
+
+ if (sig.interlaced) {
+ /* Setup internal HSYNC waveform */
+ ipu_di_sync_config(
+ disp, /* display */
+ 1, /* counter */
+ h_total / 2 - 1,/* run count */
+ DI_SYNC_CLK, /* run_resolution */
+ 0, /* offset */
+ DI_SYNC_NONE, /* offset resolution */
+ 0, /* repeat count */
+ DI_SYNC_NONE, /* CNT_CLR_SEL */
+ 0, /* CNT_POLARITY_GEN_EN */
+ DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */
+ DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */
+ 0, /* COUNT UP */
+ 0 /* COUNT DOWN */
+ );
+
+ /* Field 1 VSYNC waveform */
+ ipu_di_sync_config(
+ disp, /* display */
+ 2, /* counter */
+ h_total - 1, /* run count */
+ DI_SYNC_CLK, /* run_resolution */
+ 0, /* offset */
+ DI_SYNC_NONE, /* offset resolution */
+ 0, /* repeat count */
+ DI_SYNC_NONE, /* CNT_CLR_SEL */
+ 0, /* CNT_POLARITY_GEN_EN */
+ DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */
+ DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */
+ 0, /* COUNT UP */
+ 4 /* COUNT DOWN */
+ );
+
+ /* Setup internal HSYNC waveform */
+ ipu_di_sync_config(
+ disp, /* display */
+ 3, /* counter */
+ v_total * 2 - 1,/* run count */
+ DI_SYNC_INT_HSYNC, /* run_resolution */
+ 1, /* offset */
+ DI_SYNC_INT_HSYNC, /* offset resolution */
+ 0, /* repeat count */
+ DI_SYNC_NONE, /* CNT_CLR_SEL */
+ 0, /* CNT_POLARITY_GEN_EN */
+ DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */
+ DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */
+ 0, /* COUNT UP */
+ 4 /* COUNT DOWN */
+ );
+
+ /* Active Field ? */
+ ipu_di_sync_config(
+ disp, /* display */
+ 4, /* counter */
+ v_total / 2 - 1,/* run count */
+ DI_SYNC_HSYNC, /* run_resolution */
+ v_start_width, /* offset */
+ DI_SYNC_HSYNC, /* offset resolution */
+ 2, /* repeat count */
+ DI_SYNC_VSYNC, /* CNT_CLR_SEL */
+ 0, /* CNT_POLARITY_GEN_EN */
+ DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */
+ DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */
+ 0, /* COUNT UP */
+ 0 /* COUNT DOWN */
+ );
+
+ /* Active Line */
+ ipu_di_sync_config(
+ disp, /* display */
+ 5, /* counter */
+ 0, /* run count */
+ DI_SYNC_HSYNC, /* run_resolution */
+ 0, /* offset */
+ DI_SYNC_NONE, /* offset resolution */
+ height / 2, /* repeat count */
+ 4, /* CNT_CLR_SEL */
+ 0, /* CNT_POLARITY_GEN_EN */
+ DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */
+ DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */
+ 0, /* COUNT UP */
+ 0 /* COUNT DOWN */
+ );
+
+ /* Field 0 VSYNC waveform */
+ ipu_di_sync_config(
+ disp, /* display */
+ 6, /* counter */
+ v_total - 1, /* run count */
+ DI_SYNC_HSYNC, /* run_resolution */
+ 0, /* offset */
+ DI_SYNC_NONE, /* offset resolution */
+ 0, /* repeat count */
+ DI_SYNC_NONE, /* CNT_CLR_SEL */
+ 0, /* CNT_POLARITY_GEN_EN */
+ DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */
+ DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */
+ 0, /* COUNT UP */
+ 0 /* COUNT DOWN */
+ );
+
+ /* DC VSYNC waveform */
+ vsync_cnt = 7;
+ ipu_di_sync_config(
+ disp, /* display */
+ 7, /* counter */
+ v_total / 2 - 1,/* run count */
+ DI_SYNC_HSYNC, /* run_resolution */
+ 9, /* offset */
+ DI_SYNC_HSYNC, /* offset resolution */
+ 2, /* repeat count */
+ DI_SYNC_VSYNC, /* CNT_CLR_SEL */
+ 0, /* CNT_POLARITY_GEN_EN */
+ DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */
+ DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */
+ 0, /* COUNT UP */
+ 0 /* COUNT DOWN */
+ );
+
+ /* active pixel waveform */
+ ipu_di_sync_config(
+ disp, /* display */
+ 8, /* counter */
+ 0, /* run count */
+ DI_SYNC_CLK, /* run_resolution */
+ h_start_width, /* offset */
+ DI_SYNC_CLK, /* offset resolution */
+ width, /* repeat count */
+ 5, /* CNT_CLR_SEL */
+ 0, /* CNT_POLARITY_GEN_EN */
+ DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */
+ DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */
+ 0, /* COUNT UP */
+ 0 /* COUNT DOWN */
+ );
+
+ ipu_di_sync_config(
+ disp, /* display */
+ 9, /* counter */
+ v_total - 1, /* run count */
+ DI_SYNC_INT_HSYNC,/* run_resolution */
+ v_total / 2, /* offset */
+ DI_SYNC_INT_HSYNC,/* offset resolution */
+ 0, /* repeat count */
+ DI_SYNC_HSYNC, /* CNT_CLR_SEL */
+ 0, /* CNT_POLARITY_GEN_EN */
+ DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */
+ DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */
+ 0, /* COUNT UP */
+ 4 /* COUNT DOWN */
+ );
+
+ /* set gentime select and tag sel */
+ reg = __raw_readl(DI_SW_GEN1(disp, 9));
+ reg &= 0x1FFFFFFF;
+ reg |= (3 - 1)<<29 | 0x00008000;
+ __raw_writel(reg, DI_SW_GEN1(disp, 9));
+
+ __raw_writel(v_total / 2 - 1, DI_SCR_CONF(disp));
+
+ /* set y_sel = 1 */
+ di_gen |= 0x10000000;
+ di_gen |= DI_GEN_POLARITY_5;
+ di_gen |= DI_GEN_POLARITY_8;
+ } else {
+ /* Setup internal HSYNC waveform */
+ ipu_di_sync_config(disp, 1, h_total - 1, DI_SYNC_CLK,
+ 0, DI_SYNC_NONE, 0, DI_SYNC_NONE,
+ 0, DI_SYNC_NONE,
+ DI_SYNC_NONE, 0, 0);
+
+ /* Setup external (delayed) HSYNC waveform */
+ ipu_di_sync_config(disp, DI_SYNC_HSYNC, h_total - 1,
+ DI_SYNC_CLK, div * v_to_h_sync, DI_SYNC_CLK,
+ 0, DI_SYNC_NONE, 1, DI_SYNC_NONE,
+ DI_SYNC_CLK, 0, h_sync_width * 2);
+ /* Setup VSYNC waveform */
+ vsync_cnt = DI_SYNC_VSYNC;
+ ipu_di_sync_config(disp, DI_SYNC_VSYNC, v_total - 1,
+ DI_SYNC_INT_HSYNC, 0, DI_SYNC_NONE, 0,
+ DI_SYNC_NONE, 1, DI_SYNC_NONE,
+ DI_SYNC_INT_HSYNC, 0, v_sync_width * 2);
+ __raw_writel(v_total - 1, DI_SCR_CONF(disp));
+
+ /* Setup active data waveform to sync with DC */
+ ipu_di_sync_config(disp, 4, 0, DI_SYNC_HSYNC,
+ v_sync_width + v_start_width, DI_SYNC_HSYNC,
+ height,
+ DI_SYNC_VSYNC, 0, DI_SYNC_NONE,
+ DI_SYNC_NONE, 0, 0);
+ ipu_di_sync_config(disp, 5, 0, DI_SYNC_CLK,
+ h_sync_width + h_start_width, DI_SYNC_CLK,
+ width, 4, 0, DI_SYNC_NONE, DI_SYNC_NONE, 0,
+ 0);
+
+ /* reset all unused counters */
+ __raw_writel(0, DI_SW_GEN0(disp, 6));
+ __raw_writel(0, DI_SW_GEN1(disp, 6));
+ __raw_writel(0, DI_SW_GEN0(disp, 7));
+ __raw_writel(0, DI_SW_GEN1(disp, 7));
+ __raw_writel(0, DI_SW_GEN0(disp, 8));
+ __raw_writel(0, DI_SW_GEN1(disp, 8));
+ __raw_writel(0, DI_SW_GEN0(disp, 9));
+ __raw_writel(0, DI_SW_GEN1(disp, 9));
+
+ reg = __raw_readl(DI_STP_REP(disp, 6));
+ reg &= 0x0000FFFF;
+ __raw_writel(reg, DI_STP_REP(disp, 6));
+ __raw_writel(0, DI_STP_REP(disp, 7));
+ __raw_writel(0, DI_STP_REP(disp, 9));
+
+ /* Init template microcode */
+ if (disp) {
+ ipu_dc_write_tmpl(2, WROD(0), 0, map, SYNC_WAVE, 8, 5);
+ ipu_dc_write_tmpl(3, WROD(0), 0, map, SYNC_WAVE, 4, 5);
+ ipu_dc_write_tmpl(4, WROD(0), 0, map, SYNC_WAVE, 0, 5);
+ } else {
+ ipu_dc_write_tmpl(5, WROD(0), 0, map, SYNC_WAVE, 8, 5);
+ ipu_dc_write_tmpl(6, WROD(0), 0, map, SYNC_WAVE, 4, 5);
+ ipu_dc_write_tmpl(7, WROD(0), 0, map, SYNC_WAVE, 0, 5);
+ }
+
+ if (sig.Hsync_pol)
+ di_gen |= DI_GEN_POLARITY_2;
+ if (sig.Vsync_pol)
+ di_gen |= DI_GEN_POLARITY_3;
+
+ if (sig.clk_pol)
+ di_gen |= DI_GEN_POL_CLK;
+
+ }
+
+ __raw_writel(di_gen, DI_GENERAL(disp));
+
+ __raw_writel((--vsync_cnt << DI_VSYNC_SEL_OFFSET) |
+ 0x00000002, DI_SYNC_AS_GEN(disp));
+
+ reg = __raw_readl(DI_POL(disp));
+ reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15);
+ if (sig.enable_pol)
+ reg |= DI_POL_DRDY_POLARITY_15;
+ if (sig.data_pol)
+ reg |= DI_POL_DRDY_DATA_POLARITY;
+ __raw_writel(reg, DI_POL(disp));
+
+ __raw_writel(width, DC_DISP_CONF2(DC_DISP_ID_SYNC(disp)));
+
+ return 0;
+}
+
+/*
+ * This function sets the foreground and background plane global alpha blending
+ * modes. This function also sets the DP graphic plane according to the
+ * parameter of IPUv3 DP channel.
+ *
+ * @param channel IPUv3 DP channel
+ *
+ * @param enable Boolean to enable or disable global alpha
+ * blending. If disabled, local blending is used.
+ *
+ * @param alpha Global alpha value.
+ *
+ * @return Returns 0 on success or negative error code on fail
+ */
+int32_t ipu_disp_set_global_alpha(ipu_channel_t channel, unsigned char enable,
+ uint8_t alpha)
+{
+ uint32_t reg;
+ uint32_t flow;
+
+ unsigned char bg_chan;
+
+ if (channel == MEM_BG_SYNC || channel == MEM_FG_SYNC)
+ flow = DP_SYNC;
+ else if (channel == MEM_BG_ASYNC0 || channel == MEM_FG_ASYNC0)
+ flow = DP_ASYNC0;
+ else if (channel == MEM_BG_ASYNC1 || channel == MEM_FG_ASYNC1)
+ flow = DP_ASYNC1;
+ else
+ return -EINVAL;
+
+ if (channel == MEM_BG_SYNC || channel == MEM_BG_ASYNC0 ||
+ channel == MEM_BG_ASYNC1)
+ bg_chan = 1;
+ else
+ bg_chan = 0;
+
+ if (!g_ipu_clk_enabled)
+ clk_enable(g_ipu_clk);
+
+ if (bg_chan) {
+ reg = __raw_readl(DP_COM_CONF(flow));
+ __raw_writel(reg & ~DP_COM_CONF_GWSEL, DP_COM_CONF(flow));
+ } else {
+ reg = __raw_readl(DP_COM_CONF(flow));
+ __raw_writel(reg | DP_COM_CONF_GWSEL, DP_COM_CONF(flow));
+ }
+
+ if (enable) {
+ reg = __raw_readl(DP_GRAPH_WIND_CTRL(flow)) & 0x00FFFFFFL;
+ __raw_writel(reg | ((uint32_t) alpha << 24),
+ DP_GRAPH_WIND_CTRL(flow));
+
+ reg = __raw_readl(DP_COM_CONF(flow));
+ __raw_writel(reg | DP_COM_CONF_GWAM, DP_COM_CONF(flow));
+ } else {
+ reg = __raw_readl(DP_COM_CONF(flow));
+ __raw_writel(reg & ~DP_COM_CONF_GWAM, DP_COM_CONF(flow));
+ }
+
+ reg = __raw_readl(IPU_SRM_PRI2) | 0x8;
+ __raw_writel(reg, IPU_SRM_PRI2);
+
+ if (!g_ipu_clk_enabled)
+ clk_disable(g_ipu_clk);
+
+ return 0;
+}
+
+/*
+ * This function sets the transparent color key for SDC graphic plane.
+ *
+ * @param channel Input parameter for the logical channel ID.
+ *
+ * @param enable Boolean to enable or disable color key
+ *
+ * @param colorKey 24-bit RGB color for transparent color key.
+ *
+ * @return Returns 0 on success or negative error code on fail
+ */
+int32_t ipu_disp_set_color_key(ipu_channel_t channel, unsigned char enable,
+ uint32_t color_key)
+{
+ uint32_t reg, flow;
+ int y, u, v;
+ int red, green, blue;
+
+ if (channel == MEM_BG_SYNC || channel == MEM_FG_SYNC)
+ flow = DP_SYNC;
+ else if (channel == MEM_BG_ASYNC0 || channel == MEM_FG_ASYNC0)
+ flow = DP_ASYNC0;
+ else if (channel == MEM_BG_ASYNC1 || channel == MEM_FG_ASYNC1)
+ flow = DP_ASYNC1;
+ else
+ return -EINVAL;
+
+ if (!g_ipu_clk_enabled)
+ clk_enable(g_ipu_clk);
+
+ color_key_4rgb = 1;
+ /* Transform color key from rgb to yuv if CSC is enabled */
+ if (((fg_csc_type == RGB2YUV) && (bg_csc_type == YUV2YUV)) ||
+ ((fg_csc_type == YUV2YUV) && (bg_csc_type == RGB2YUV)) ||
+ ((fg_csc_type == YUV2YUV) && (bg_csc_type == YUV2YUV)) ||
+ ((fg_csc_type == YUV2RGB) && (bg_csc_type == YUV2RGB))) {
+
+ debug("color key 0x%x need change to yuv fmt\n", color_key);
+
+ red = (color_key >> 16) & 0xFF;
+ green = (color_key >> 8) & 0xFF;
+ blue = color_key & 0xFF;
+
+ y = rgb_to_yuv(0, red, green, blue);
+ u = rgb_to_yuv(1, red, green, blue);
+ v = rgb_to_yuv(2, red, green, blue);
+ color_key = (y << 16) | (u << 8) | v;
+
+ color_key_4rgb = 0;
+
+ debug("color key change to yuv fmt 0x%x\n", color_key);
+ }
+
+ if (enable) {
+ reg = __raw_readl(DP_GRAPH_WIND_CTRL(flow)) & 0xFF000000L;
+ __raw_writel(reg | color_key, DP_GRAPH_WIND_CTRL(flow));
+
+ reg = __raw_readl(DP_COM_CONF(flow));
+ __raw_writel(reg | DP_COM_CONF_GWCKE, DP_COM_CONF(flow));
+ } else {
+ reg = __raw_readl(DP_COM_CONF(flow));
+ __raw_writel(reg & ~DP_COM_CONF_GWCKE, DP_COM_CONF(flow));
+ }
+
+ reg = __raw_readl(IPU_SRM_PRI2) | 0x8;
+ __raw_writel(reg, IPU_SRM_PRI2);
+
+ if (!g_ipu_clk_enabled)
+ clk_disable(g_ipu_clk);
+
+ return 0;
+}
--- /dev/null
+/*
+ * Porting to u-boot:
+ *
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de
+ *
+ * Linux IPU driver for MX51:
+ *
+ * (C) Copyright 2005-2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IPU_REGS_INCLUDED__
+#define __IPU_REGS_INCLUDED__
+
+#define IPU_DISP0_BASE 0x00000000
+#define IPU_MCU_T_DEFAULT 8
+#define IPU_DISP1_BASE (IPU_MCU_T_DEFAULT << 25)
+#define IPU_CM_REG_BASE 0x1E000000
+#define IPU_STAT_REG_BASE 0x1E000200
+#define IPU_IDMAC_REG_BASE 0x1E008000
+#define IPU_ISP_REG_BASE 0x1E010000
+#define IPU_DP_REG_BASE 0x1E018000
+#define IPU_IC_REG_BASE 0x1E020000
+#define IPU_IRT_REG_BASE 0x1E028000
+#define IPU_CSI0_REG_BASE 0x1E030000
+#define IPU_CSI1_REG_BASE 0x1E038000
+#define IPU_DI0_REG_BASE 0x1E040000
+#define IPU_DI1_REG_BASE 0x1E048000
+#define IPU_SMFC_REG_BASE 0x1E050000
+#define IPU_DC_REG_BASE 0x1E058000
+#define IPU_DMFC_REG_BASE 0x1E060000
+#define IPU_CPMEM_REG_BASE 0x1F000000
+#define IPU_LUT_REG_BASE 0x1F020000
+#define IPU_SRM_REG_BASE 0x1F040000
+#define IPU_TPM_REG_BASE 0x1F060000
+#define IPU_DC_TMPL_REG_BASE 0x1F080000
+#define IPU_ISP_TBPR_REG_BASE 0x1F0C0000
+#define IPU_VDI_REG_BASE 0x1E068000
+
+
+extern u32 *ipu_dc_tmpl_reg;
+
+#define DC_EVT_NF 0
+#define DC_EVT_NL 1
+#define DC_EVT_EOF 2
+#define DC_EVT_NFIELD 3
+#define DC_EVT_EOL 4
+#define DC_EVT_EOFIELD 5
+#define DC_EVT_NEW_ADDR 6
+#define DC_EVT_NEW_CHAN 7
+#define DC_EVT_NEW_DATA 8
+
+#define DC_EVT_NEW_ADDR_W_0 0
+#define DC_EVT_NEW_ADDR_W_1 1
+#define DC_EVT_NEW_CHAN_W_0 2
+#define DC_EVT_NEW_CHAN_W_1 3
+#define DC_EVT_NEW_DATA_W_0 4
+#define DC_EVT_NEW_DATA_W_1 5
+#define DC_EVT_NEW_ADDR_R_0 6
+#define DC_EVT_NEW_ADDR_R_1 7
+#define DC_EVT_NEW_CHAN_R_0 8
+#define DC_EVT_NEW_CHAN_R_1 9
+#define DC_EVT_NEW_DATA_R_0 10
+#define DC_EVT_NEW_DATA_R_1 11
+
+/* Software reset for ipu */
+#define SW_IPU_RST 8
+
+enum {
+ IPU_CONF_DP_EN = 0x00000020,
+ IPU_CONF_DI0_EN = 0x00000040,
+ IPU_CONF_DI1_EN = 0x00000080,
+ IPU_CONF_DMFC_EN = 0x00000400,
+ IPU_CONF_DC_EN = 0x00000200,
+
+ DI0_COUNTER_RELEASE = 0x01000000,
+ DI1_COUNTER_RELEASE = 0x02000000,
+
+ DI_DW_GEN_ACCESS_SIZE_OFFSET = 24,
+ DI_DW_GEN_COMPONENT_SIZE_OFFSET = 16,
+
+ DI_GEN_DI_CLK_EXT = 0x100000,
+ DI_GEN_POLARITY_1 = 0x00000001,
+ DI_GEN_POLARITY_2 = 0x00000002,
+ DI_GEN_POLARITY_3 = 0x00000004,
+ DI_GEN_POLARITY_4 = 0x00000008,
+ DI_GEN_POLARITY_5 = 0x00000010,
+ DI_GEN_POLARITY_6 = 0x00000020,
+ DI_GEN_POLARITY_7 = 0x00000040,
+ DI_GEN_POLARITY_8 = 0x00000080,
+ DI_GEN_POL_CLK = 0x20000,
+
+ DI_POL_DRDY_DATA_POLARITY = 0x00000080,
+ DI_POL_DRDY_POLARITY_15 = 0x00000010,
+ DI_VSYNC_SEL_OFFSET = 13,
+
+ DC_WR_CH_CONF_FIELD_MODE = 0x00000200,
+ DC_WR_CH_CONF_PROG_TYPE_OFFSET = 5,
+ DC_WR_CH_CONF_PROG_TYPE_MASK = 0x000000E0,
+ DC_WR_CH_CONF_PROG_DI_ID = 0x00000004,
+ DC_WR_CH_CONF_PROG_DISP_ID_OFFSET = 3,
+ DC_WR_CH_CONF_PROG_DISP_ID_MASK = 0x00000018,
+
+ DP_COM_CONF_FG_EN = 0x00000001,
+ DP_COM_CONF_GWSEL = 0x00000002,
+ DP_COM_CONF_GWAM = 0x00000004,
+ DP_COM_CONF_GWCKE = 0x00000008,
+ DP_COM_CONF_CSC_DEF_MASK = 0x00000300,
+ DP_COM_CONF_CSC_DEF_OFFSET = 8,
+ DP_COM_CONF_CSC_DEF_FG = 0x00000300,
+ DP_COM_CONF_CSC_DEF_BG = 0x00000200,
+ DP_COM_CONF_CSC_DEF_BOTH = 0x00000100,
+ DP_COM_CONF_GAMMA_EN = 0x00001000,
+ DP_COM_CONF_GAMMA_YUV_EN = 0x00002000,
+};
+
+enum di_pins {
+ DI_PIN11 = 0,
+ DI_PIN12 = 1,
+ DI_PIN13 = 2,
+ DI_PIN14 = 3,
+ DI_PIN15 = 4,
+ DI_PIN16 = 5,
+ DI_PIN17 = 6,
+ DI_PIN_CS = 7,
+
+ DI_PIN_SER_CLK = 0,
+ DI_PIN_SER_RS = 1,
+};
+
+enum di_sync_wave {
+ DI_SYNC_NONE = -1,
+ DI_SYNC_CLK = 0,
+ DI_SYNC_INT_HSYNC = 1,
+ DI_SYNC_HSYNC = 2,
+ DI_SYNC_VSYNC = 3,
+ DI_SYNC_DE = 5,
+};
+
+struct ipu_cm {
+ u32 conf;
+ u32 sisg_ctrl0;
+ u32 sisg_ctrl1;
+ u32 sisg_set[6];
+ u32 sisg_clear[6];
+ u32 int_ctrl[15];
+ u32 sdma_event[10];
+ u32 srm_pri1;
+ u32 srm_pri2;
+ u32 fs_proc_flow[3];
+ u32 fs_disp_flow[2];
+ u32 skip;
+ u32 disp_alt_conf;
+ u32 disp_gen;
+ u32 disp_alt[4];
+ u32 snoop;
+ u32 mem_rst;
+ u32 pm;
+ u32 gpr;
+ u32 reserved0[26];
+ u32 ch_db_mode_sel[2];
+ u32 reserved1[16];
+ u32 alt_ch_db_mode_sel[2];
+ u32 reserved2[2];
+ u32 ch_trb_mode_sel[2];
+};
+
+struct ipu_idmac {
+ u32 conf;
+ u32 ch_en[2];
+ u32 sep_alpha;
+ u32 alt_sep_alpha;
+ u32 ch_pri[2];
+ u32 wm_en[2];
+ u32 lock_en[2];
+ u32 sub_addr[5];
+ u32 bndm_en[2];
+ u32 sc_cord[2];
+ u32 reserved[45];
+ u32 ch_busy[2];
+};
+
+struct ipu_com_async {
+ u32 com_conf_async;
+ u32 graph_wind_ctrl_async;
+ u32 fg_pos_async;
+ u32 cur_pos_async;
+ u32 cur_map_async;
+ u32 gamma_c_async[8];
+ u32 gamma_s_async[4];
+ u32 dp_csca_async[4];
+ u32 dp_csc_async[2];
+};
+
+struct ipu_dp {
+ u32 com_conf_sync;
+ u32 graph_wind_ctrl_sync;
+ u32 fg_pos_sync;
+ u32 cur_pos_sync;
+ u32 cur_map_sync;
+ u32 gamma_c_sync[8];
+ u32 gamma_s_sync[4];
+ u32 csca_sync[4];
+ u32 csc_sync[2];
+ u32 cur_pos_alt;
+ struct ipu_com_async async[2];
+};
+
+struct ipu_di {
+ u32 general;
+ u32 bs_clkgen0;
+ u32 bs_clkgen1;
+ u32 sw_gen0[9];
+ u32 sw_gen1[9];
+ u32 sync_as;
+ u32 dw_gen[12];
+ u32 dw_set[48];
+ u32 stp_rep[4];
+ u32 stp_rep9;
+ u32 ser_conf;
+ u32 ssc;
+ u32 pol;
+ u32 aw0;
+ u32 aw1;
+ u32 scr_conf;
+ u32 stat;
+};
+
+struct ipu_stat {
+ u32 int_stat[15];
+ u32 cur_buf[2];
+ u32 alt_cur_buf_0;
+ u32 alt_cur_buf_1;
+ u32 srm_stat;
+ u32 proc_task_stat;
+ u32 disp_task_stat;
+ u32 triple_cur_buf[4];
+ u32 ch_buf0_rdy[2];
+ u32 ch_buf1_rdy[2];
+ u32 alt_ch_buf0_rdy[2];
+ u32 alt_ch_buf1_rdy[2];
+ u32 ch_buf2_rdy[2];
+};
+
+struct ipu_dc_ch {
+ u32 wr_ch_conf;
+ u32 wr_ch_addr;
+ u32 rl[5];
+};
+
+struct ipu_dc {
+ struct ipu_dc_ch dc_ch0_1_2[3];
+ u32 cmd_ch_conf_3;
+ u32 cmd_ch_conf_4;
+ struct ipu_dc_ch dc_ch5_6[2];
+ struct ipu_dc_ch dc_ch8;
+ u32 rl6_ch_8;
+ struct ipu_dc_ch dc_ch9;
+ u32 rl6_ch_9;
+ u32 gen;
+ u32 disp_conf1[4];
+ u32 disp_conf2[4];
+ u32 di0_conf[2];
+ u32 di1_conf[2];
+ u32 dc_map_ptr[15];
+ u32 dc_map_val[12];
+ u32 udge[16];
+ u32 lla[2];
+ u32 r_lla[2];
+ u32 wr_ch_addr_5_alt;
+ u32 stat;
+};
+
+struct ipu_dmfc {
+ u32 rd_chan;
+ u32 wr_chan;
+ u32 wr_chan_def;
+ u32 dp_chan;
+ u32 dp_chan_def;
+ u32 general[2];
+ u32 ic_ctrl;
+ u32 wr_chan_alt;
+ u32 wr_chan_def_alt;
+ u32 general1_alt;
+ u32 stat;
+};
+
+#define IPU_CM_REG ((struct ipu_cm *)(IPU_CTRL_BASE_ADDR + \
+ IPU_CM_REG_BASE))
+#define IPU_CONF (&IPU_CM_REG->conf)
+#define IPU_SRM_PRI1 (&IPU_CM_REG->srm_pri1)
+#define IPU_SRM_PRI2 (&IPU_CM_REG->srm_pri2)
+#define IPU_FS_PROC_FLOW1 (&IPU_CM_REG->fs_proc_flow[0])
+#define IPU_FS_PROC_FLOW2 (&IPU_CM_REG->fs_proc_flow[1])
+#define IPU_FS_PROC_FLOW3 (&IPU_CM_REG->fs_proc_flow[2])
+#define IPU_FS_DISP_FLOW1 (&IPU_CM_REG->fs_disp_flow[0])
+#define IPU_DISP_GEN (&IPU_CM_REG->disp_gen)
+#define IPU_MEM_RST (&IPU_CM_REG->mem_rst)
+#define IPU_GPR (&IPU_CM_REG->gpr)
+#define IPU_CHA_DB_MODE_SEL(ch) (&IPU_CM_REG->ch_db_mode_sel[ch / 32])
+
+#define IPU_STAT ((struct ipu_stat *)(IPU_CTRL_BASE_ADDR + \
+ IPU_STAT_REG_BASE))
+#define IPU_CHA_CUR_BUF(ch) (&IPU_STAT->cur_buf[ch / 32])
+#define IPU_CHA_BUF0_RDY(ch) (&IPU_STAT->ch_buf0_rdy[ch / 32])
+#define IPU_CHA_BUF1_RDY(ch) (&IPU_STAT->ch_buf1_rdy[ch / 32])
+
+#define IPU_INT_CTRL(n) (&IPU_CM_REG->int_ctrl[(n) - 1])
+
+#define IDMAC_REG ((struct ipu_idmac *)(IPU_CTRL_BASE_ADDR + \
+ IPU_IDMAC_REG_BASE))
+#define IDMAC_CONF (&IDMAC_REG->conf)
+#define IDMAC_CHA_EN(ch) (&IDMAC_REG->ch_en[ch / 32])
+#define IDMAC_CHA_PRI(ch) (&IDMAC_REG->ch_pri[ch / 32])
+
+#define DI_REG(di) ((struct ipu_di *)(IPU_CTRL_BASE_ADDR + \
+ ((di == 1) ? IPU_DI1_REG_BASE : \
+ IPU_DI0_REG_BASE)))
+#define DI_GENERAL(di) (&DI_REG(di)->general)
+#define DI_BS_CLKGEN0(di) (&DI_REG(di)->bs_clkgen0)
+#define DI_BS_CLKGEN1(di) (&DI_REG(di)->bs_clkgen1)
+
+#define DI_SW_GEN0(di, gen) (&DI_REG(di)->sw_gen0[gen - 1])
+#define DI_SW_GEN1(di, gen) (&DI_REG(di)->sw_gen1[gen - 1])
+#define DI_STP_REP(di, gen) (&DI_REG(di)->stp_rep[(gen - 1) / 2])
+#define DI_SYNC_AS_GEN(di) (&DI_REG(di)->sync_as)
+#define DI_DW_GEN(di, gen) (&DI_REG(di)->dw_gen[gen])
+#define DI_DW_SET(di, gen, set) (&DI_REG(di)->dw_set[gen + 12 * set])
+#define DI_POL(di) (&DI_REG(di)->pol)
+#define DI_SCR_CONF(di) (&DI_REG(di)->scr_conf)
+
+#define DMFC_REG ((struct ipu_dmfc *)(IPU_CTRL_BASE_ADDR + \
+ IPU_DMFC_REG_BASE))
+#define DMFC_WR_CHAN (&DMFC_REG->wr_chan)
+#define DMFC_WR_CHAN_DEF (&DMFC_REG->wr_chan_def)
+#define DMFC_DP_CHAN (&DMFC_REG->dp_chan)
+#define DMFC_DP_CHAN_DEF (&DMFC_REG->dp_chan_def)
+#define DMFC_GENERAL1 (&DMFC_REG->general[0])
+#define DMFC_IC_CTRL (&DMFC_REG->ic_ctrl)
+
+
+#define DC_REG ((struct ipu_dc *)(IPU_CTRL_BASE_ADDR + \
+ IPU_DC_REG_BASE))
+#define DC_MAP_CONF_PTR(n) (&DC_REG->dc_map_ptr[n / 2])
+#define DC_MAP_CONF_VAL(n) (&DC_REG->dc_map_val[n / 2])
+
+
+static inline struct ipu_dc_ch *dc_ch_offset(int ch)
+{
+ switch (ch) {
+ case 0:
+ case 1:
+ case 2:
+ return &DC_REG->dc_ch0_1_2[ch];
+ case 5:
+ case 6:
+ return &DC_REG->dc_ch5_6[ch - 5];
+ case 8:
+ return &DC_REG->dc_ch8;
+ case 9:
+ return &DC_REG->dc_ch9;
+ default:
+ printf("%s: invalid channel %d\n", __func__, ch);
+ return NULL;
+ }
+
+}
+
+#define DC_RL_CH(ch, evt) (&dc_ch_offset(ch)->rl[evt / 2])
+
+#define DC_WR_CH_CONF(ch) (&dc_ch_offset(ch)->wr_ch_conf)
+#define DC_WR_CH_ADDR(ch) (&dc_ch_offset(ch)->wr_ch_addr)
+
+#define DC_WR_CH_CONF_1 DC_WR_CH_CONF(1)
+#define DC_WR_CH_CONF_5 DC_WR_CH_CONF(5)
+
+#define DC_GEN (&DC_REG->gen)
+#define DC_DISP_CONF2(disp) (&DC_REG->disp_conf2[disp])
+#define DC_STAT (&DC_REG->stat)
+
+#define DP_SYNC 0
+#define DP_ASYNC0 0x60
+#define DP_ASYNC1 0xBC
+
+#define DP_REG ((struct ipu_dp *)(IPU_CTRL_BASE_ADDR + \
+ IPU_DP_REG_BASE))
+#define DP_COM_CONF(flow) (&DP_REG->com_conf_sync)
+#define DP_GRAPH_WIND_CTRL(flow) (&DP_REG->graph_wind_ctrl_sync)
+#define DP_CSC_A_0(flow) (&DP_REG->csca_sync[0])
+#define DP_CSC_A_1(flow) (&DP_REG->csca_sync[1])
+#define DP_CSC_A_2(flow) (&DP_REG->csca_sync[2])
+#define DP_CSC_A_3(flow) (&DP_REG->csca_sync[3])
+
+#define DP_CSC_0(flow) (&DP_REG->csc_sync[0])
+#define DP_CSC_1(flow) (&DP_REG->csc_sync[1])
+
+/* DC template opcodes */
+#define WROD(lf) (0x18 | (lf << 1))
+
+#endif
--- /dev/null
+/*
+ * Porting to u-boot:
+ *
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de
+ *
+ * MX51 Linux framebuffer:
+ *
+ * (C) Copyright 2004-2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* #define DEBUG */
+#include <common.h>
+#include <asm/errno.h>
+#include <linux/string.h>
+#include <linux/list.h>
+#include <linux/fb.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <lcd.h>
+#include "videomodes.h"
+#include "ipu.h"
+#include "mxcfb.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void *lcd_base; /* Start of framebuffer memory */
+void *lcd_console_address; /* Start of console buffer */
+
+int lcd_line_length;
+int lcd_color_fg;
+int lcd_color_bg;
+
+short console_col;
+short console_row;
+
+vidinfo_t panel_info;
+
+static int mxcfb_map_video_memory(struct fb_info *fbi);
+static int mxcfb_unmap_video_memory(struct fb_info *fbi);
+
+void lcd_initcolregs(void)
+{
+}
+
+void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
+{
+}
+
+void lcd_disable(void)
+{
+}
+
+void lcd_panel_disable(void)
+{
+}
+
+void fb_videomode_to_var(struct fb_var_screeninfo *var,
+ const struct fb_videomode *mode)
+{
+ var->xres = mode->xres;
+ var->yres = mode->yres;
+ var->xres_virtual = mode->xres;
+ var->yres_virtual = mode->yres;
+ var->xoffset = 0;
+ var->yoffset = 0;
+ var->pixclock = mode->pixclock;
+ var->left_margin = mode->left_margin;
+ var->right_margin = mode->right_margin;
+ var->upper_margin = mode->upper_margin;
+ var->lower_margin = mode->lower_margin;
+ var->hsync_len = mode->hsync_len;
+ var->vsync_len = mode->vsync_len;
+ var->sync = mode->sync;
+ var->vmode = mode->vmode & FB_VMODE_MASK;
+}
+
+/*
+ * Structure containing the MXC specific framebuffer information.
+ */
+struct mxcfb_info {
+ int blank;
+ ipu_channel_t ipu_ch;
+ int ipu_di;
+ u32 ipu_di_pix_fmt;
+ unsigned char overlay;
+ unsigned char alpha_chan_en;
+ dma_addr_t alpha_phy_addr0;
+ dma_addr_t alpha_phy_addr1;
+ void *alpha_virt_addr0;
+ void *alpha_virt_addr1;
+ uint32_t alpha_mem_len;
+ uint32_t cur_ipu_buf;
+ uint32_t cur_ipu_alpha_buf;
+
+ u32 pseudo_palette[16];
+};
+
+enum {
+ BOTH_ON,
+ SRC_ON,
+ TGT_ON,
+ BOTH_OFF
+};
+
+static unsigned long default_bpp = 16;
+static unsigned char g_dp_in_use;
+static struct fb_info *mxcfb_info[3];
+static int ext_clk_used;
+
+static uint32_t bpp_to_pixfmt(struct fb_info *fbi)
+{
+ uint32_t pixfmt = 0;
+
+ debug("bpp_to_pixfmt: %d\n", fbi->var.bits_per_pixel);
+
+ if (fbi->var.nonstd)
+ return fbi->var.nonstd;
+
+ switch (fbi->var.bits_per_pixel) {
+ case 24:
+ pixfmt = IPU_PIX_FMT_BGR24;
+ break;
+ case 32:
+ pixfmt = IPU_PIX_FMT_BGR32;
+ break;
+ case 16:
+ pixfmt = IPU_PIX_FMT_RGB565;
+ break;
+ }
+ return pixfmt;
+}
+
+/*
+ * Set fixed framebuffer parameters based on variable settings.
+ *
+ * @param info framebuffer information pointer
+ */
+static int mxcfb_set_fix(struct fb_info *info)
+{
+ struct fb_fix_screeninfo *fix = &info->fix;
+ struct fb_var_screeninfo *var = &info->var;
+
+ fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->accel = FB_ACCEL_NONE;
+ fix->visual = FB_VISUAL_TRUECOLOR;
+ fix->xpanstep = 1;
+ fix->ypanstep = 1;
+
+ return 0;
+}
+
+static int setup_disp_channel1(struct fb_info *fbi)
+{
+ ipu_channel_params_t params;
+ struct mxcfb_info *mxc_fbi = (struct mxcfb_info *)fbi->par;
+
+ memset(¶ms, 0, sizeof(params));
+ params.mem_dp_bg_sync.di = mxc_fbi->ipu_di;
+
+ debug("%s called\n", __func__);
+ /*
+ * Assuming interlaced means yuv output, below setting also
+ * valid for mem_dc_sync. FG should have the same vmode as BG.
+ */
+ if (fbi->var.vmode & FB_VMODE_INTERLACED) {
+ params.mem_dp_bg_sync.interlaced = 1;
+ params.mem_dp_bg_sync.out_pixel_fmt =
+ IPU_PIX_FMT_YUV444;
+ } else {
+ if (mxc_fbi->ipu_di_pix_fmt) {
+ params.mem_dp_bg_sync.out_pixel_fmt =
+ mxc_fbi->ipu_di_pix_fmt;
+ } else {
+ params.mem_dp_bg_sync.out_pixel_fmt =
+ IPU_PIX_FMT_RGB666;
+ }
+ }
+ params.mem_dp_bg_sync.in_pixel_fmt = bpp_to_pixfmt(fbi);
+ if (mxc_fbi->alpha_chan_en)
+ params.mem_dp_bg_sync.alpha_chan_en = 1;
+
+ ipu_init_channel(mxc_fbi->ipu_ch, ¶ms);
+
+ return 0;
+}
+
+static int setup_disp_channel2(struct fb_info *fbi)
+{
+ int retval = 0;
+ struct mxcfb_info *mxc_fbi = (struct mxcfb_info *)fbi->par;
+
+ mxc_fbi->cur_ipu_buf = 1;
+ if (mxc_fbi->alpha_chan_en)
+ mxc_fbi->cur_ipu_alpha_buf = 1;
+
+ fbi->var.xoffset = fbi->var.yoffset = 0;
+
+ debug("%s: %x %d %d %d %lx %lx\n",
+ __func__,
+ mxc_fbi->ipu_ch,
+ fbi->var.xres,
+ fbi->var.yres,
+ fbi->fix.line_length,
+ fbi->fix.smem_start,
+ fbi->fix.smem_start +
+ (fbi->fix.line_length * fbi->var.yres));
+
+ retval = ipu_init_channel_buffer(mxc_fbi->ipu_ch, IPU_INPUT_BUFFER,
+ bpp_to_pixfmt(fbi),
+ fbi->var.xres, fbi->var.yres,
+ fbi->fix.line_length,
+ fbi->fix.smem_start +
+ (fbi->fix.line_length * fbi->var.yres),
+ fbi->fix.smem_start,
+ 0, 0);
+ if (retval)
+ printf("ipu_init_channel_buffer error %d\n", retval);
+
+ return retval;
+}
+
+/*
+ * Set framebuffer parameters and change the operating mode.
+ *
+ * @param info framebuffer information pointer
+ */
+static int mxcfb_set_par(struct fb_info *fbi)
+{
+ int retval = 0;
+ u32 mem_len;
+ ipu_di_signal_cfg_t sig_cfg;
+ struct mxcfb_info *mxc_fbi = (struct mxcfb_info *)fbi->par;
+ uint32_t out_pixel_fmt;
+
+ ipu_disable_channel(mxc_fbi->ipu_ch);
+ ipu_uninit_channel(mxc_fbi->ipu_ch);
+ mxcfb_set_fix(fbi);
+
+ mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
+ if (!fbi->fix.smem_start || (mem_len > fbi->fix.smem_len)) {
+ if (fbi->fix.smem_start)
+ mxcfb_unmap_video_memory(fbi);
+
+ if (mxcfb_map_video_memory(fbi) < 0)
+ return -ENOMEM;
+ }
+
+ setup_disp_channel1(fbi);
+
+ memset(&sig_cfg, 0, sizeof(sig_cfg));
+ if (fbi->var.vmode & FB_VMODE_INTERLACED) {
+ sig_cfg.interlaced = 1;
+ out_pixel_fmt = IPU_PIX_FMT_YUV444;
+ } else {
+ if (mxc_fbi->ipu_di_pix_fmt)
+ out_pixel_fmt = mxc_fbi->ipu_di_pix_fmt;
+ else
+ out_pixel_fmt = IPU_PIX_FMT_RGB666;
+ }
+ if (fbi->var.vmode & FB_VMODE_ODD_FLD_FIRST) /* PAL */
+ sig_cfg.odd_field_first = 1;
+ if ((fbi->var.sync & FB_SYNC_EXT) || ext_clk_used)
+ sig_cfg.ext_clk = 1;
+ if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
+ sig_cfg.Hsync_pol = 1;
+ if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
+ sig_cfg.Vsync_pol = 1;
+ if (!(fbi->var.sync & FB_SYNC_CLK_LAT_FALL))
+ sig_cfg.clk_pol = 1;
+ if (fbi->var.sync & FB_SYNC_DATA_INVERT)
+ sig_cfg.data_pol = 1;
+ if (!(fbi->var.sync & FB_SYNC_OE_LOW_ACT))
+ sig_cfg.enable_pol = 1;
+ if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
+ sig_cfg.clkidle_en = 1;
+
+ debug("pixclock = %ul Hz\n",
+ (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
+
+ if (ipu_init_sync_panel(mxc_fbi->ipu_di,
+ (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
+ fbi->var.xres, fbi->var.yres,
+ out_pixel_fmt,
+ fbi->var.left_margin,
+ fbi->var.hsync_len,
+ fbi->var.right_margin,
+ fbi->var.upper_margin,
+ fbi->var.vsync_len,
+ fbi->var.lower_margin,
+ 0, sig_cfg) != 0) {
+ puts("mxcfb: Error initializing panel.\n");
+ return -EINVAL;
+ }
+
+ retval = setup_disp_channel2(fbi);
+ if (retval)
+ return retval;
+
+ if (mxc_fbi->blank == FB_BLANK_UNBLANK)
+ ipu_enable_channel(mxc_fbi->ipu_ch);
+
+ return retval;
+}
+
+/*
+ * Check framebuffer variable parameters and adjust to valid values.
+ *
+ * @param var framebuffer variable parameters
+ *
+ * @param info framebuffer information pointer
+ */
+static int mxcfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ u32 vtotal;
+ u32 htotal;
+
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
+
+ if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
+ (var->bits_per_pixel != 16) && (var->bits_per_pixel != 8))
+ var->bits_per_pixel = default_bpp;
+
+ switch (var->bits_per_pixel) {
+ case 8:
+ var->red.length = 3;
+ var->red.offset = 5;
+ var->red.msb_right = 0;
+
+ var->green.length = 3;
+ var->green.offset = 2;
+ var->green.msb_right = 0;
+
+ var->blue.length = 2;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 16:
+ var->red.length = 5;
+ var->red.offset = 11;
+ var->red.msb_right = 0;
+
+ var->green.length = 6;
+ var->green.offset = 5;
+ var->green.msb_right = 0;
+
+ var->blue.length = 5;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 24:
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->red.msb_right = 0;
+
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
+
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 32:
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->red.msb_right = 0;
+
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
+
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 8;
+ var->transp.offset = 24;
+ var->transp.msb_right = 0;
+ break;
+ }
+
+ if (var->pixclock < 1000) {
+ htotal = var->xres + var->right_margin + var->hsync_len +
+ var->left_margin;
+ vtotal = var->yres + var->lower_margin + var->vsync_len +
+ var->upper_margin;
+ var->pixclock = (vtotal * htotal * 6UL) / 100UL;
+ var->pixclock = KHZ2PICOS(var->pixclock);
+ printf("pixclock set for 60Hz refresh = %u ps\n",
+ var->pixclock);
+ }
+
+ var->height = -1;
+ var->width = -1;
+ var->grayscale = 0;
+
+ return 0;
+}
+
+static int mxcfb_map_video_memory(struct fb_info *fbi)
+{
+ if (fbi->fix.smem_len < fbi->var.yres_virtual * fbi->fix.line_length) {
+ fbi->fix.smem_len = fbi->var.yres_virtual *
+ fbi->fix.line_length;
+ }
+
+ fbi->screen_base = (char *)lcd_base;
+ fbi->fix.smem_start = (unsigned long)lcd_base;
+ if (fbi->screen_base == 0) {
+ puts("Unable to allocate framebuffer memory\n");
+ fbi->fix.smem_len = 0;
+ fbi->fix.smem_start = 0;
+ return -EBUSY;
+ }
+
+ debug("allocated fb @ paddr=0x%08X, size=%d.\n",
+ (uint32_t) fbi->fix.smem_start, fbi->fix.smem_len);
+
+ fbi->screen_size = fbi->fix.smem_len;
+
+ /* Clear the screen */
+ memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
+
+ return 0;
+}
+
+static int mxcfb_unmap_video_memory(struct fb_info *fbi)
+{
+ fbi->screen_base = 0;
+ fbi->fix.smem_start = 0;
+ fbi->fix.smem_len = 0;
+ return 0;
+}
+
+/*
+ * Initializes the framebuffer information pointer. After allocating
+ * sufficient memory for the framebuffer structure, the fields are
+ * filled with custom information passed in from the configurable
+ * structures. This includes information such as bits per pixel,
+ * color maps, screen width/height and RGBA offsets.
+ *
+ * @return Framebuffer structure initialized with our information
+ */
+static struct fb_info *mxcfb_init_fbinfo(void)
+{
+#define BYTES_PER_LONG 4
+#define PADDING (BYTES_PER_LONG - (sizeof(struct fb_info) % BYTES_PER_LONG))
+ struct fb_info *fbi;
+ struct mxcfb_info *mxcfbi;
+ char *p;
+ int size = sizeof(struct mxcfb_info) + PADDING +
+ sizeof(struct fb_info);
+
+ debug("%s: %d %d %d %d\n",
+ __func__,
+ PADDING,
+ size,
+ sizeof(struct mxcfb_info),
+ sizeof(struct fb_info));
+ /*
+ * Allocate sufficient memory for the fb structure
+ */
+
+ p = malloc(size);
+ if (!p)
+ return NULL;
+
+ memset(p, 0, size);
+
+ fbi = (struct fb_info *)p;
+ fbi->par = p + sizeof(struct fb_info) + PADDING;
+
+ mxcfbi = (struct mxcfb_info *)fbi->par;
+ debug("Framebuffer structures at: fbi=0x%x mxcfbi=0x%x\n",
+ (unsigned int)fbi, (unsigned int)mxcfbi);
+
+ fbi->var.activate = FB_ACTIVATE_NOW;
+
+ fbi->flags = FBINFO_FLAG_DEFAULT;
+ fbi->pseudo_palette = mxcfbi->pseudo_palette;
+
+ return fbi;
+}
+
+/*
+ * Probe routine for the framebuffer driver. It is called during the
+ * driver binding process. The following functions are performed in
+ * this routine: Framebuffer initialization, Memory allocation and
+ * mapping, Framebuffer registration, IPU initialization.
+ *
+ * @return Appropriate error code to the kernel common code
+ */
+static int mxcfb_probe(u32 interface_pix_fmt, struct fb_videomode *mode)
+{
+ struct fb_info *fbi;
+ struct mxcfb_info *mxcfbi;
+ int ret = 0;
+
+ /*
+ * Initialize FB structures
+ */
+ fbi = mxcfb_init_fbinfo();
+ if (!fbi) {
+ ret = -ENOMEM;
+ goto err0;
+ }
+ mxcfbi = (struct mxcfb_info *)fbi->par;
+
+ if (!g_dp_in_use) {
+ mxcfbi->ipu_ch = MEM_BG_SYNC;
+ mxcfbi->blank = FB_BLANK_UNBLANK;
+ } else {
+ mxcfbi->ipu_ch = MEM_DC_SYNC;
+ mxcfbi->blank = FB_BLANK_POWERDOWN;
+ }
+
+ mxcfbi->ipu_di = 0;
+
+ ipu_disp_set_global_alpha(mxcfbi->ipu_ch, 1, 0x80);
+ ipu_disp_set_color_key(mxcfbi->ipu_ch, 0, 0);
+ strcpy(fbi->fix.id, "DISP3 BG");
+
+ g_dp_in_use = 1;
+
+ mxcfb_info[mxcfbi->ipu_di] = fbi;
+
+ /* Need dummy values until real panel is configured */
+ fbi->var.xres = 640;
+ fbi->var.yres = 480;
+ fbi->var.bits_per_pixel = 16;
+
+ mxcfbi->ipu_di_pix_fmt = interface_pix_fmt;
+ fb_videomode_to_var(&fbi->var, mode);
+
+ mxcfb_check_var(&fbi->var, fbi);
+
+ /* Default Y virtual size is 2x panel size */
+ fbi->var.yres_virtual = fbi->var.yres * 2;
+
+ mxcfb_set_fix(fbi);
+
+ /* alocate fb first */
+ if (mxcfb_map_video_memory(fbi) < 0)
+ return -ENOMEM;
+
+ mxcfb_set_par(fbi);
+
+ /* Setting panel_info for lcd */
+ panel_info.cmap = NULL;
+ panel_info.vl_col = fbi->var.xres;
+ panel_info.vl_row = fbi->var.yres;
+ panel_info.vl_bpix = LCD_BPP;
+
+ lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
+
+ debug("MXC IPUV3 configured\n"
+ "XRES = %d YRES = %d BitsXpixel = %d\n",
+ panel_info.vl_col,
+ panel_info.vl_row,
+ panel_info.vl_bpix);
+
+ ipu_dump_registers();
+
+ return 0;
+
+err0:
+ return ret;
+}
+
+int overwrite_console(void)
+{
+ /* Keep stdout / stderr on serial, our LCD is for splashscreen only */
+ return 1;
+}
+
+void lcd_ctrl_init(void *lcdbase)
+{
+ u32 mem_len = panel_info.vl_col *
+ panel_info.vl_row *
+ NBITS(panel_info.vl_bpix) / 8;
+
+ /*
+ * We rely on lcdbase being a physical address, i.e., either MMU off,
+ * or 1-to-1 mapping. Might want to add some virt2phys here.
+ */
+ if (!lcdbase)
+ return;
+
+ memset(lcdbase, 0, mem_len);
+}
+
+int mx51_fb_init(struct fb_videomode *mode)
+{
+ int ret;
+
+ ret = ipu_probe();
+ if (ret)
+ puts("Error initializing IPU\n");
+
+ lcd_base += 56;
+
+ debug("Framebuffer at 0x%x\n", (unsigned int)lcd_base);
+ ret = mxcfb_probe(IPU_PIX_FMT_RGB666, mode);
+
+ return ret;
+}
--- /dev/null
+/*
+ * Porting to u-boot:
+ *
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de
+ *
+ * Linux IPU driver for MX51:
+ *
+ * (C) Copyright 2004-2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MXCFB_H__
+#define __ASM_ARCH_MXCFB_H__
+
+#define FB_SYNC_OE_LOW_ACT 0x80000000
+#define FB_SYNC_CLK_LAT_FALL 0x40000000
+#define FB_SYNC_DATA_INVERT 0x20000000
+#define FB_SYNC_CLK_IDLE_EN 0x10000000
+#define FB_SYNC_SHARP_MODE 0x08000000
+#define FB_SYNC_SWAP_RGB 0x04000000
+
+struct mxcfb_gbl_alpha {
+ int enable;
+ int alpha;
+};
+
+struct mxcfb_loc_alpha {
+ int enable;
+ int alpha_in_pixel;
+ unsigned long alpha_phy_addr0;
+ unsigned long alpha_phy_addr1;
+};
+
+struct mxcfb_color_key {
+ int enable;
+ __u32 color_key;
+};
+
+struct mxcfb_pos {
+ __u16 x;
+ __u16 y;
+};
+
+struct mxcfb_gamma {
+ int enable;
+ int constk[16];
+ int slopek[16];
+};
+
+#endif
/* List of I2C addresses to be verified by POST */
-#define I2C_ADDR_LIST {CONFIG_SYS_I2C_PICIO_ADDR, \
- CONFIG_SYS_I2C_RTC_ADDR, \
- }
+#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_PICIO_ADDR, \
+ CONFIG_SYS_I2C_RTC_ADDR, \
+ }
#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
/* List of I2C addresses to be verified by POST */
-#define I2C_ADDR_LIST {CONFIG_SYS_I2C_PICIO_ADDR, \
- CONFIG_SYS_I2C_RTC_ADDR, \
- }
+#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_PICIO_ADDR, \
+ CONFIG_SYS_I2C_RTC_ADDR, \
+ }
#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
/* List of I2C addresses to be verified by POST */
-#undef I2C_ADDR_LIST
-#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \
- CONFIG_SYS_I2C_RTC_ADDR, \
- CONFIG_SYS_I2C_SLAVE }
+#undef CONFIG_SYS_POST_I2C_ADDRS
+#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \
+ CONFIG_SYS_I2C_RTC_ADDR, \
+ CONFIG_SYS_I2C_SLAVE}
/*
* Flash configuration
/* List of I2C addresses to be verified by POST */
#if defined (CONFIG_MINIFAP)
-#undef I2C_ADDR_LIST
-#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \
- CONFIG_SYS_I2C_HWMON_ADDR, \
- CONFIG_SYS_I2C_SLAVE }
+#undef CONFIG_SYS_POST_I2C_ADDRS
+#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \
+ CONFIG_SYS_I2C_HWMON_ADDR, \
+ CONFIG_SYS_I2C_SLAVE}
#endif
/*
#define CONFIG_PREBOOT "run try_update"
#define CONFIG_EXTRA_ENV_SETTINGS \
- "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \
- "cf1=diskboot 200000 0:1\0" \
- "bootcmd_cf1=run bcf1\0" \
- "bcf=setenv bootargs root=/dev/hda3\0" \
- "bootcmd_nfs=run bnfs\0" \
- "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs\0" \
- "bootcmd_nor=cp.b ${kernel_addr} 200000 100000; run norargs addip; run bk\0" \
- "bnfs=nfs 200000 ${rootpath}/boot/uImage ; run nfsargs addip ; run bk\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \
- "try_update=usb start;sleep 2;usb start;sleep 1;fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;source 2F0000\0" \
- "env_addr=FE060000\0" \
- "kernel_addr=FE100000\0" \
- "rootfs_addr=FE200000\0" \
- "add_mtd=setenv bootargs ${bootargs} mtdparts=phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \
- "bcf1=run cf1; run bcf; run addip; run bk\0" \
- "add_consolespec=setenv bootargs ${bootargs} console=/dev/null quiet\0" \
- "addip=if test \"${ethaddr}\" != \"00:00:00:00:00:00\" ; then if test -n ${ipaddr}; then setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off panic=1; fi ; fi\0" \
- "hostname=CPUP0\0" \
- "ethaddr=00:00:00:00:00:00\0" \
- "netdev=eth0\0" \
- "bootcmd=run bootcmd_nor\0" \
+ "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \
+ "cf1=diskboot 200000 0:1\0" \
+ "bootcmd_cf1=run bcf1\0" \
+ "bcf=setenv bootargs root=/dev/hda3\0" \
+ "bootcmd_nfs=run bnfs\0" \
+ "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs "\
+ "panic=1\0" \
+ "bootcmd_nor=cp.b ${kernel_addr} 200000 100000;" \
+ "run norargs addip; run bk\0" \
+ "bnfs=nfs 200000 ${rootpath}/boot/uImage;" \
+ "run nfsargs addip ; run bk\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "try_update=usb start;sleep 2;usb start;sleep 1;" \
+ "fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;" \
+ "source 2F0000\0" \
+ "env_addr=FE060000\0" \
+ "kernel_addr=FE100000\0" \
+ "rootfs_addr=FE200000\0" \
+ "add_mtd=setenv bootargs ${bootargs} mtdparts=" \
+ "phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \
+ "bcf1=run cf1; run bcf; run addip; run bk\0" \
+ "add_consolespec=setenv bootargs ${bootargs} " \
+ "console=/dev/null quiet\0" \
+ "addip=if test -n ${ethaddr};" \
+ "then if test -n ${ipaddr};" \
+ "then setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:"\
+ "${netmask}:${hostname}:${netdev}:off;" \
+ "fi;" \
+ "else;" \
+ "setenv bootargs ${bootargs} no_ethaddr;" \
+ "fi\0" \
+ "hostname=CPUP0\0" \
+ "ethaddr=00:00:00:00:00:00\0" \
+ "netdev=eth0\0" \
+ "bootcmd=run bootcmd_nor\0" \
""
/*
* IPB Bus clocking configuration.
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_CS0_START}
+#define CONFIG_SYS_FLASH_BANKS_SIZES {CONFIG_SYS_CS0_SIZE}
/*
* Environment settings
#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU | CONFIG_SYS_POST_I2C)
#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4)
/* List of I2C addresses to be verified by POST */
-#define I2C_ADDR_LIST { CONFIG_SYS_I2C_SLAVE, CONFIG_SYS_I2C_IO, CONFIG_SYS_I2C_EEPROM }
+#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_SLAVE, \
+ CONFIG_SYS_I2C_IO, \
+ CONFIG_SYS_I2C_EEPROM}
/* display image timestamps */
#define CONFIG_TIMESTAMP 1
#endif
#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/* List of I2C addresses to be verified by POST */
#ifdef CONFIG_USE_FRAM
-#define I2C_ADDR_LIST { /* CONFIG_SYS_I2C_AUDIO_ADDR, */ \
- CONFIG_SYS_I2C_SYSMON_ADDR, \
- CONFIG_SYS_I2C_RTC_ADDR, \
- CONFIG_SYS_I2C_POWER_A_ADDR, \
- CONFIG_SYS_I2C_POWER_B_ADDR, \
- CONFIG_SYS_I2C_KEYBD_ADDR, \
- CONFIG_SYS_I2C_PICIO_ADDR, \
- CONFIG_SYS_I2C_EEPROM_ADDR, \
- }
+#define CONFIG_SYS_POST_I2C_ADDRS {/* CONFIG_SYS_I2C_AUDIO_ADDR, */ \
+ CONFIG_SYS_I2C_SYSMON_ADDR, \
+ CONFIG_SYS_I2C_RTC_ADDR, \
+ CONFIG_SYS_I2C_POWER_A_ADDR, \
+ CONFIG_SYS_I2C_POWER_B_ADDR, \
+ CONFIG_SYS_I2C_KEYBD_ADDR, \
+ CONFIG_SYS_I2C_PICIO_ADDR, \
+ CONFIG_SYS_I2C_EEPROM_ADDR, \
+ }
#else /* Use EEPROM - which show up on 8 consequtive addresses */
-#define I2C_ADDR_LIST { /* CONFIG_SYS_I2C_AUDIO_ADDR, */ \
- CONFIG_SYS_I2C_SYSMON_ADDR, \
- CONFIG_SYS_I2C_RTC_ADDR, \
- CONFIG_SYS_I2C_POWER_A_ADDR, \
- CONFIG_SYS_I2C_POWER_B_ADDR, \
- CONFIG_SYS_I2C_KEYBD_ADDR, \
- CONFIG_SYS_I2C_PICIO_ADDR, \
- CONFIG_SYS_I2C_EEPROM_ADDR+0, \
- CONFIG_SYS_I2C_EEPROM_ADDR+1, \
- CONFIG_SYS_I2C_EEPROM_ADDR+2, \
- CONFIG_SYS_I2C_EEPROM_ADDR+3, \
- CONFIG_SYS_I2C_EEPROM_ADDR+4, \
- CONFIG_SYS_I2C_EEPROM_ADDR+5, \
- CONFIG_SYS_I2C_EEPROM_ADDR+6, \
- CONFIG_SYS_I2C_EEPROM_ADDR+7, \
- }
+#define CONFIG_SYS_POST_I2C_ADDRS {/* CONFIG_SYS_I2C_AUDIO_ADDR, */ \
+ CONFIG_SYS_I2C_SYSMON_ADDR, \
+ CONFIG_SYS_I2C_RTC_ADDR, \
+ CONFIG_SYS_I2C_POWER_A_ADDR, \
+ CONFIG_SYS_I2C_POWER_B_ADDR, \
+ CONFIG_SYS_I2C_KEYBD_ADDR, \
+ CONFIG_SYS_I2C_PICIO_ADDR, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+0, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+1, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+2, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+3, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+4, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+5, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+6, \
+ CONFIG_SYS_I2C_EEPROM_ADDR+7, \
+ }
#endif /* CONFIG_USE_FRAM */
/*-----------------------------------------------------------------------
#define CONFIG_SYS_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */
#define CONFIG_SYS_I2C_DSPIC_IO_ADDR 0x57 /* PIC I/O addr */
-#define I2C_ADDR_LIST { \
- CONFIG_SYS_I2C_RTC_ADDR, \
- CONFIG_SYS_I2C_EEPROM_CPU_ADDR, \
- CONFIG_SYS_I2C_EEPROM_MB_ADDR, \
- CONFIG_SYS_I2C_DSPIC_ADDR, \
- CONFIG_SYS_I2C_DSPIC_2_ADDR, \
- CONFIG_SYS_I2C_DSPIC_KEYB_ADDR, \
- CONFIG_SYS_I2C_DSPIC_IO_ADDR }
+#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_RTC_ADDR, \
+ CONFIG_SYS_I2C_EEPROM_CPU_ADDR,\
+ CONFIG_SYS_I2C_EEPROM_MB_ADDR, \
+ CONFIG_SYS_I2C_DSPIC_ADDR, \
+ CONFIG_SYS_I2C_DSPIC_2_ADDR, \
+ CONFIG_SYS_I2C_DSPIC_KEYB_ADDR,\
+ CONFIG_SYS_I2C_DSPIC_IO_ADDR }
/*
* Pass open firmware flat tree
/* MEMORY */
#if defined(CONFIG_SH_32BIT)
-#define SH7785LCR_SDRAM_PHYS_BASE (0x48000000)
-#define SH7785LCR_SDRAM_BASE (0x88000000)
+/* 0x40000000 - 0x47FFFFFF does not use */
+#define CONFIG_SH_SDRAM_OFFSET (0x8000000)
+#define SH7785LCR_SDRAM_PHYS_BASE (0x40000000 + CONFIG_SH_SDRAM_OFFSET)
+#define SH7785LCR_SDRAM_BASE (0x80000000 + CONFIG_SH_SDRAM_OFFSET)
#define SH7785LCR_SDRAM_SIZE (384 * 1024 * 1024)
#define SH7785LCR_FLASH_BASE_1 (0xa0000000)
#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024)
/* List of I2C addresses to be verified by POST */
#if defined (CONFIG_MINIFAP)
-#undef I2C_ADDR_LIST
-#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \
- CONFIG_SYS_I2C_HWMON_ADDR, \
- CONFIG_SYS_I2C_SLAVE }
+#undef CONFIG_SYS_POST_I2C_ADDRS
+#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \
+ CONFIG_SYS_I2C_HWMON_ADDR, \
+ CONFIG_SYS_I2C_SLAVE}
#endif
/*
#define CONFIG_SYS_NO_FLASH
+/*
+ * Framebuffer and LCD
+ */
+#define CONFIG_PREBOOT
+#define CONFIG_LCD
+#define CONFIG_VIDEO_MX5
+#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define LCD_BPP LCD_COLOR16
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+
#endif /* __CONFIG_H */
/* High Level Configuration Options */
#define CONFIG_XPEDITE1000 1
#define CONFIG_SYS_BOARD_NAME "XPedite1000"
+#define CONFIG_SYS_FORM_PMC 1
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_440 1
#define CONFIG_440GX 1 /* 440 GX */
"misc_args=ip=on\0" \
"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
"bootfile=/home/user/file\0" \
- "osfile=/home/user/uImage-XPedite1000\0" \
- "fdtfile=/home/user/xpedite1000.dtb\0" \
+ "osfile=/home/user/board.uImage\0" \
+ "fdtfile=/home/user/board.dtb\0" \
"ubootfile=/home/user/u-boot.bin\0" \
"fdtaddr=c00000\0" \
"osaddr=0x1000000\0" \
*/
/*
- * xpedite5170 board configuration file
+ * xpedite517x board configuration file
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_MPC8641 1 /* MPC8641 specific */
#define CONFIG_XPEDITE5140 1 /* MPC8641HPCN board specific */
#define CONFIG_SYS_BOARD_NAME "XPedite5170"
+#define CONFIG_SYS_FORM_3U_VPX 1
#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */
#define CONFIG_BAT_RW 1 /* Use common BAT rw code */
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x20000000
+#define CONFIG_POST (CONFIG_SYS_POST_MEMORY |\
+ CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST {CONFIG_SYS_I2C_DS1621_ADDR, \
+ CONFIG_SYS_I2C_DS4510_ADDR, \
+ CONFIG_SYS_I2C_EEPROM_ADDR, \
+ CONFIG_SYS_I2C_LM90_ADDR, \
+ CONFIG_SYS_I2C_PCA9553_ADDR, \
+ CONFIG_SYS_I2C_PCA953X_ADDR0, \
+ CONFIG_SYS_I2C_PCA953X_ADDR1, \
+ CONFIG_SYS_I2C_PCA953X_ADDR2, \
+ CONFIG_SYS_I2C_PCA953X_ADDR3, \
+ CONFIG_SYS_I2C_PEX8518_ADDR, \
+ CONFIG_SYS_I2C_RTC_ADDR}
+/* The XPedite5170 can host an XMC which has an EEPROM at address 0x50 */
+#define I2C_ADDR_IGNORE_LIST {0x50}
/*
* Memory map
#define CONFIG_SYS_I2C_DS1621_ADDR 0x48
#define CONFIG_DTT_DS1621
#define CONFIG_DTT_SENSORS { 0 }
+#define CONFIG_SYS_I2C_LM90_ADDR 0x4c
/* I2C EEPROM - AT24C128B */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
#define CONFIG_SYS_I2C_PCA953X_ADDR2 0x1e
#define CONFIG_SYS_I2C_PCA953X_ADDR3 0x1f
#define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0
+#define CONFIG_SYS_I2C_PCA9553_ADDR 0x62
/*
* PU = pulled high, PD = pulled low
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
/* PCIE1 - PEX8518 */
-#define CONFIG_SYS_PCIE1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */
-#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
/* PCIE2 - VPX P1 */
-#define CONFIG_SYS_PCIE2_MEM_BASE 0xc0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS
#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE2_IO_PHYS 0xe8800000
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 /* 8M */
#define CONFIG_CMD_PCA953X
#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SNTP
"misc_args=ip=on\0" \
"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
"bootfile=/home/user/file\0" \
- "osfile=/home/user/uImage-XPedite5170\0" \
- "fdtfile=/home/user/xpedite5170.dtb\0" \
+ "osfile=/home/user/board.uImage\0" \
+ "fdtfile=/home/user/board.dtb\0" \
"ubootfile=/home/user/u-boot.bin\0" \
"fdtaddr=c00000\0" \
"osaddr=0x1000000\0" \
*/
/*
- * xpedite5200 board configuration file
+ * xpedite520x board configuration file
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_MPC8548 1
#define CONFIG_XPEDITE5200 1
#define CONFIG_SYS_BOARD_NAME "XPedite5200"
+#define CONFIG_SYS_FORM_PMC_XMC 1
#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x20000000
+#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
+ CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST {CONFIG_SYS_I2C_MAX1237_ADDR, \
+ CONFIG_SYS_I2C_EEPROM_ADDR, \
+ CONFIG_SYS_I2C_PCA953X_ADDR0, \
+ CONFIG_SYS_I2C_PCA953X_ADDR1, \
+ CONFIG_SYS_I2C_RTC_ADDR}
/*
* Memory map
#define CONFIG_SYS_PCA953X_BRD_CFG2 0x04
#define CONFIG_SYS_PCA953X_XMC_ROOT0 0x08
#define CONFIG_SYS_PCA953X_FLASH_PASS_CS 0x10
-#define CONFIG_SYS_PCA953X_FLASH_WP 0x20
+#define CONFIG_SYS_PCA953X_NVM_WP 0x20
#define CONFIG_SYS_PCA953X_MONARCH 0x40
#define CONFIG_SYS_PCA953X_EREADY 0x80
#define CONFIG_SYS_PCA953X_P14_IO6 0x40
#define CONFIG_SYS_PCA953X_P14_IO7 0x80
+/* 12-bit ADC used to measure CPU diode */
+#define CONFIG_SYS_I2C_MAX1237_ADDR 0x34
+
/*
* General PCI
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
-#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS
#define CONFIG_SYS_PCI1_MEM_SIZE 0x40000000 /* 1G */
-#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
#define CONFIG_SYS_PCI1_IO_PHYS 0xe8000000
#define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 1M */
#define CONFIG_CMD_PCA953X
#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
#define CONFIG_CMD_PING
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_REGINFO
"misc_args=ip=on\0" \
"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
"bootfile=/home/user/file\0" \
- "osfile=/home/user/uImage-XPedite5200\0" \
- "fdtfile=/home/user/xpedite5200.dtb\0" \
+ "osfile=/home/user/board.uImage\0" \
+ "fdtfile=/home/user/board.dtb\0" \
"ubootfile=/home/user/u-boot.bin\0" \
"fdtaddr=c00000\0" \
"osaddr=0x1000000\0" \
*/
/*
- * xpedite5370 board configuration file
+ * xpedite537x board configuration file
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_MPC8572 1
#define CONFIG_XPEDITE5370 1
#define CONFIG_SYS_BOARD_NAME "XPedite5370"
+#define CONFIG_SYS_FORM_3U_VPX 1
#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x20000000
+#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
+ CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST {CONFIG_SYS_I2C_DS1621_ADDR, \
+ CONFIG_SYS_I2C_DS4510_ADDR, \
+ CONFIG_SYS_I2C_EEPROM_ADDR, \
+ CONFIG_SYS_I2C_LM90_ADDR, \
+ CONFIG_SYS_I2C_PCA953X_ADDR0, \
+ CONFIG_SYS_I2C_PCA953X_ADDR1, \
+ CONFIG_SYS_I2C_PCA953X_ADDR2, \
+ CONFIG_SYS_I2C_PCA953X_ADDR3, \
+ CONFIG_SYS_I2C_PEX8518_ADDR, \
+ CONFIG_SYS_I2C_RTC_ADDR}
+/* The XPedite5370 can host an XMC which has an EEPROM at address 0x50 */
+#define I2C_ADDR_IGNORE_LIST {0x50}
/*
* Memory map
#define CONFIG_SYS_I2C_DS1621_ADDR 0x48
#define CONFIG_DTT_DS1621
#define CONFIG_DTT_SENSORS { 0 }
+#define CONFIG_SYS_I2C_LM90_ADDR 0x4c
/* I2C EEPROM - AT24C128B */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
/* PCIE1 - VPX P1 */
-#define CONFIG_SYS_PCIE1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */
-#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
/* PCIE2 - PEX8518 */
-#define CONFIG_SYS_PCIE2_MEM_BASE 0xc0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS
#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE2_IO_PHYS 0xe8800000
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 /* 8M */
#define CONFIG_CMD_PCA953X
#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
#define CONFIG_CMD_PING
#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_SNTP
"misc_args=ip=on\0" \
"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
"bootfile=/home/user/file\0" \
- "osfile=/home/user/uImage-XPedite5370\0" \
- "fdtfile=/home/user/xpedite5370.dtb\0" \
+ "osfile=/home/user/board.uImage\0" \
+ "fdtfile=/home/user/board.dtb\0" \
"ubootfile=/home/user/u-boot.bin\0" \
"fdtaddr=c00000\0" \
"osaddr=0x1000000\0" \
--- /dev/null
+/*
+ * Copyright 2010 Extreme Engineering Solutions, Inc.
+ * Copyright 2007-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * xpedite550x board configuration file
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_BOOKE 1 /* BOOKE */
+#define CONFIG_E500 1 /* BOOKE e500 family */
+#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */
+#define CONFIG_P2020 1
+#define CONFIG_XPEDITE550X 1
+#define CONFIG_SYS_BOARD_NAME "XPedite5500"
+#define CONFIG_SYS_FORM_PMC_XMC 1
+#define CONFIG_PRPMC_PCI_ALIAS "pci0" /* Processor PMC interface on pci0 */
+#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0xfff80000
+#endif
+
+#define CONFIG_PCI 1 /* Enable PCI/PCIE */
+#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
+#define CONFIG_PCIE1 1 /* PCIE controler 1 (PEX8112 or XMC) */
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
+#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
+#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
+#define CONFIG_FSL_ELBC 1
+
+/*
+ * Multicore config
+ */
+#define CONFIG_MP
+#define CONFIG_BPTR_VIRT_ADDR 0xee000000 /* virt boot page address */
+#define CONFIG_MPC8xxx_DISABLE_BPTR /* Don't leave BPTR enabled */
+
+/*
+ * DDR config
+ */
+#define CONFIG_FSL_DDR3
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
+#define CONFIG_DDR_SPD
+#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
+#define SPD_EEPROM_ADDRESS1 0x54
+#define SPD_EEPROM_OFFSET 0x200 /* OFFSET of SPD in EEPROM */
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+#define CONFIG_CHIP_SELECTS_PER_CTRL 2
+#define CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_VERY_BIG_RAM
+
+#ifndef __ASSEMBLY__
+extern unsigned long get_board_sys_clk(unsigned long dummy);
+extern unsigned long get_board_ddr_clk(unsigned long dummy);
+#endif
+
+#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */
+#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) /* ddrclk for MPC85xx */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_ENABLE_36BIT_PHYS 1
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+
+/*
+ * Diagnostics
+ */
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x10000000
+#define CONFIG_SYS_MEMTEST_END 0x20000000
+#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
+ CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST {CONFIG_SYS_I2C_EEPROM_ADDR, \
+ CONFIG_SYS_I2C_LM75_ADDR, \
+ CONFIG_SYS_I2C_LM90_ADDR, \
+ CONFIG_SYS_I2C_PCA953X_ADDR0, \
+ CONFIG_SYS_I2C_PCA953X_ADDR2, \
+ CONFIG_SYS_I2C_PCA953X_ADDR3, \
+ CONFIG_SYS_I2C_RTC_ADDR}
+
+/*
+ * Memory map
+ * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable
+ * 0x8000_0000 0xbfff_ffff PCIe1 Mem 1G non-cacheable
+ * 0xe000_0000 0xe7ff_ffff SRAM/SSRAM/L1 Cache 128M non-cacheable
+ * 0xe800_0000 0xe87f_ffff PCIe1 IO 8M non-cacheable
+ * 0xee00_0000 0xee00_ffff Boot page translation 4K non-cacheable
+ * 0xef00_0000 0xef0f_ffff CCSR/IMMR 1M non-cacheable
+ * 0xef80_0000 0xef8f_ffff NAND Flash 1M non-cacheable
+ * 0xf000_0000 0xf7ff_ffff NOR Flash 2 128M non-cacheable
+ * 0xf800_0000 0xffff_ffff NOR Flash 1 128M non-cacheable
+ */
+
+#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_8 | LCRR_EADC_3)
+
+/*
+ * NAND flash configuration
+ */
+#define CONFIG_SYS_NAND_BASE 0xef800000
+#define CONFIG_SYS_NAND_BASE2 0xef840000 /* Unused at this time */
+#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \
+ CONFIG_SYS_NAND_BASE2}
+#define CONFIG_SYS_MAX_NAND_DEVICE 2
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_SYS_NAND_QUIET_TEST /* 2nd NAND flash not always populated */
+#define CONFIG_NAND_FSL_ELBC
+
+/*
+ * NOR flash configuration
+ */
+#define CONFIG_SYS_FLASH_BASE 0xf8000000
+#define CONFIG_SYS_FLASH_BASE2 0xf0000000
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff40000, 0xc0000}, \
+ {0xf7f40000, 0xc0000} }
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+
+/*
+ * Chip select configuration
+ */
+/* NOR Flash 0 on CS0 */
+#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
+ BR_PS_16 | \
+ BR_V)
+#define CONFIG_SYS_OR0_PRELIM (OR_AM_128MB | \
+ OR_GPCM_CSNT | \
+ OR_GPCM_XACS | \
+ OR_GPCM_ACS_DIV2 | \
+ OR_GPCM_SCY_8 | \
+ OR_GPCM_TRLX | \
+ OR_GPCM_EHTR | \
+ OR_GPCM_EAD)
+
+/* NOR Flash 1 on CS1 */
+#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FLASH_BASE2 | \
+ BR_PS_16 | \
+ BR_V)
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
+
+/* NAND flash on CS2 */
+#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_NAND_BASE | \
+ (2<<BR_DECC_SHIFT) | \
+ BR_PS_8 | \
+ BR_MS_FCM | \
+ BR_V)
+
+/* NAND flash on CS2 */
+#define CONFIG_SYS_OR2_PRELIM (OR_AM_256KB | \
+ OR_FCM_PGS | \
+ OR_FCM_CSCT | \
+ OR_FCM_CST | \
+ OR_FCM_CHT | \
+ OR_FCM_SCY_1 | \
+ OR_FCM_TRLX | \
+ OR_FCM_EHTR)
+
+/* NAND flash on CS3 */
+#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE2 | \
+ (2<<BR_DECC_SHIFT) | \
+ BR_PS_8 | \
+ BR_MS_FCM | \
+ BR_V)
+#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM
+
+/*
+ * Use L1 as initial stack
+ */
+#define CONFIG_SYS_INIT_RAM_LOCK 1
+#define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000
+#define CONFIG_SYS_INIT_RAM_END 0x00004000
+
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * Use the HUSH parser
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+#define CONFIG_FDT_FIXUP_PCI_IRQ 1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x3000
+#define CONFIG_SYS_I2C2_OFFSET 0x3100
+#define CONFIG_I2C_MULTI_BUS
+
+/* I2C DS7505 temperature sensor */
+#define CONFIG_DTT_LM75
+#define CONFIG_DTT_SENSORS { 0 }
+#define CONFIG_SYS_I2C_LM75_ADDR 0x48
+
+/* I2C ADT7461 temperature sensor */
+#define CONFIG_SYS_I2C_LM90_ADDR 0x4C
+
+/* I2C EEPROM - AT24C128B */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */
+
+/* I2C RTC */
+#define CONFIG_RTC_M41T11 1
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
+
+/* GPIO */
+#define CONFIG_PCA953X
+#define CONFIG_SYS_I2C_PCA953X_ADDR0 0x18
+#define CONFIG_SYS_I2C_PCA953X_ADDR1 0x1c
+#define CONFIG_SYS_I2C_PCA953X_ADDR2 0x1e
+#define CONFIG_SYS_I2C_PCA953X_ADDR3 0x1f
+#define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0
+
+/*
+ * GPIO pin definitions, PU = pulled high, PD = pulled low
+ */
+/* PCA9557 @ 0x18*/
+#define CONFIG_SYS_PCA953X_C0_SER0_EN 0x01 /* PU; UART0 enable (1: enabled) */
+#define CONFIG_SYS_PCA953X_C0_SER0_MODE 0x02 /* PU; UART0 serial mode select (1: RS-485, 0: RS-232) */
+#define CONFIG_SYS_PCA953X_C0_SER1_EN 0x04 /* PU; UART1 enable (1: enabled) */
+#define CONFIG_SYS_PCA953X_C0_SER1_MODE 0x08 /* PU; UART1 serial mode select (1: RS-485, 0: RS-232) */
+#define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS 0x10 /* PU; Boot flash CS select */
+#define CONFIG_SYS_PCA953X_NVM_WP 0x20 /* PU; Write protection (0: disabled, 1: enabled) */
+
+/* PCA9557 @ 0x1e*/
+#define CONFIG_SYS_PCA953X_XMC_GA0 0x01 /* PU; */
+#define CONFIG_SYS_PCA953X_XMC_GA1 0x02 /* PU; */
+#define CONFIG_SYS_PCA953X_XMC_GA2 0x04 /* PU; */
+#define CONFIG_SYS_PCA953X_XMC_WAKE 0x10 /* PU; */
+#define CONFIG_SYS_PCA953X_XMC_BIST 0x20 /* Enable XMC BIST */
+#define CONFIG_SYS_PCA953X_PMC_EREADY 0x40 /* PU; PMC PCI eready */
+#define CONFIG_SYS_PCA953X_PMC_MONARCH 0x80 /* PMC monarch mode enable */
+
+/* PCA9557 @ 0x1f */
+#define CONFIG_SYS_PCA953X_MC_GPIO0 0x01 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO1 0x02 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO2 0x04 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO3 0x08 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO4 0x10 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO5 0x20 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO6 0x40 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO7 0x80 /* PU; */
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+
+/* controller 1 - PEX8112 or XMC, depending on build option */
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
+#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
+
+
+/*
+ * Networking options
+ */
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_TSEC_TBI
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
+#define CONFIG_ETHPRIME "eTSEC2"
+
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC1"
+#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC1_PHY_ADDR 1
+#define TSEC1_PHYIDX 0
+#define CONFIG_HAS_ETH0
+
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC2"
+#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_PHY_ADDR 2
+#define TSEC2_PHYIDX 0
+#define CONFIG_HAS_ETH1
+
+#define CONFIG_TSEC3 1
+#define CONFIG_TSEC3_NAME "eTSEC3"
+#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC3_PHY_ADDR 3
+#define TSEC3_PHYIDX 0
+#define CONFIG_HAS_ETH2
+
+/*
+ * USB
+ */
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_DOS_PARTITION
+
+/*
+ * Command configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCA953X
+#define CONFIG_CMD_PCA953X_INFO
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */
+#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
+#define CONFIG_PREBOOT /* enable preboot variable */
+#define CONFIG_FIT 1
+#define CONFIG_FIT_VERBOSE 1
+#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 16 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */
+
+/*
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k (one sector) for env */
+#define CONFIG_ENV_SIZE 0x8000
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
+
+/*
+ * Flash memory map:
+ * fff80000 - ffffffff Pri U-Boot (512 KB)
+ * fff40000 - fff7ffff Pri U-Boot Environment (256 KB)
+ * fff00000 - fff3ffff Pri FDT (256KB)
+ * fef00000 - ffefffff Pri OS image (16MB)
+ * f8000000 - feefffff Pri OS Use/Filesystem (111MB)
+ *
+ * f7f80000 - f7ffffff Sec U-Boot (512 KB)
+ * f7f40000 - f7f7ffff Sec U-Boot Environment (256 KB)
+ * f7f00000 - f7f3ffff Sec FDT (256KB)
+ * f6f00000 - f7efffff Sec OS image (16MB)
+ * f0000000 - f6efffff Sec OS Use/Filesystem (111MB)
+ */
+#define CONFIG_UBOOT1_ENV_ADDR MK_STR(0xfff80000)
+#define CONFIG_UBOOT2_ENV_ADDR MK_STR(0xf7f80000)
+#define CONFIG_FDT1_ENV_ADDR MK_STR(0xfff00000)
+#define CONFIG_FDT2_ENV_ADDR MK_STR(0xf7f00000)
+#define CONFIG_OS1_ENV_ADDR MK_STR(0xfef00000)
+#define CONFIG_OS2_ENV_ADDR MK_STR(0xf6f00000)
+
+#define CONFIG_PROG_UBOOT1 \
+ "$download_cmd $loadaddr $ubootfile; " \
+ "if test $? -eq 0; then " \
+ "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; " \
+ "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; " \
+ "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; " \
+ "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; " \
+ "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; " \
+ "if test $? -ne 0; then " \
+ "echo PROGRAM FAILED; " \
+ "else; " \
+ "echo PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_PROG_UBOOT2 \
+ "$download_cmd $loadaddr $ubootfile; " \
+ "if test $? -eq 0; then " \
+ "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; " \
+ "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; " \
+ "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; " \
+ "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; " \
+ "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; " \
+ "if test $? -ne 0; then " \
+ "echo PROGRAM FAILED; " \
+ "else; " \
+ "echo PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_BOOT_OS_NET \
+ "$download_cmd $osaddr $osfile; " \
+ "if test $? -eq 0; then " \
+ "if test -n $fdtaddr; then " \
+ "$download_cmd $fdtaddr $fdtfile; " \
+ "if test $? -eq 0; then " \
+ "bootm $osaddr - $fdtaddr; " \
+ "else; " \
+ "echo FDT DOWNLOAD FAILED; " \
+ "fi; " \
+ "else; " \
+ "bootm $osaddr; " \
+ "fi; " \
+ "else; " \
+ "echo OS DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_PROG_OS1 \
+ "$download_cmd $osaddr $osfile; " \
+ "if test $? -eq 0; then " \
+ "erase "CONFIG_OS1_ENV_ADDR" +$filesize; " \
+ "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \
+ "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \
+ "if test $? -ne 0; then " \
+ "echo OS PROGRAM FAILED; " \
+ "else; " \
+ "echo OS PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo OS DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_PROG_OS2 \
+ "$download_cmd $osaddr $osfile; " \
+ "if test $? -eq 0; then " \
+ "erase "CONFIG_OS2_ENV_ADDR" +$filesize; " \
+ "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \
+ "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \
+ "if test $? -ne 0; then " \
+ "echo OS PROGRAM FAILED; " \
+ "else; " \
+ "echo OS PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo OS DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_PROG_FDT1 \
+ "$download_cmd $fdtaddr $fdtfile; " \
+ "if test $? -eq 0; then " \
+ "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;" \
+ "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \
+ "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \
+ "if test $? -ne 0; then " \
+ "echo FDT PROGRAM FAILED; " \
+ "else; " \
+ "echo FDT PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo FDT DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_PROG_FDT2 \
+ "$download_cmd $fdtaddr $fdtfile; " \
+ "if test $? -eq 0; then " \
+ "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;" \
+ "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \
+ "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \
+ "if test $? -ne 0; then " \
+ "echo FDT PROGRAM FAILED; " \
+ "else; " \
+ "echo FDT PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo FDT DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "autoload=yes\0" \
+ "download_cmd=tftp\0" \
+ "console_args=console=ttyS0,115200\0" \
+ "root_args=root=/dev/nfs rw\0" \
+ "misc_args=ip=on\0" \
+ "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
+ "bootfile=/home/user/file\0" \
+ "osfile=/home/user/board.uImage\0" \
+ "fdtfile=/home/user/board.dtb\0" \
+ "ubootfile=/home/user/u-boot.bin\0" \
+ "fdtaddr=c00000\0" \
+ "osaddr=0x1000000\0" \
+ "loadaddr=0x1000000\0" \
+ "prog_uboot1="CONFIG_PROG_UBOOT1"\0" \
+ "prog_uboot2="CONFIG_PROG_UBOOT2"\0" \
+ "prog_os1="CONFIG_PROG_OS1"\0" \
+ "prog_os2="CONFIG_PROG_OS2"\0" \
+ "prog_fdt1="CONFIG_PROG_FDT1"\0" \
+ "prog_fdt2="CONFIG_PROG_FDT2"\0" \
+ "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \
+ "bootcmd_flash1=run set_bootargs; " \
+ "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
+ "bootcmd_flash2=run set_bootargs; " \
+ "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
+ "bootcmd=run bootcmd_flash1\0"
+#endif /* __CONFIG_H */
/* Display Commands */
#define DISPLAY_CLEAR 0x1 /* Clear the display */
#define DISPLAY_HOME 0x2 /* Set cursor at home position */
-#define DISPLAY_MARK 0x4 /* Enable the decimal point led, if implemented */
void display_set(int cmd);
int display_putc(char c);
--- /dev/null
+#ifndef _LINUX_FB_H
+#define _LINUX_FB_H
+
+#include <linux/types.h>
+
+/* Definitions of frame buffers */
+
+#define FB_MAX 32 /* sufficient for now */
+
+#define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */
+
+#define FB_VISUAL_MONO01 0 /* Monochr. 1=Black 0=White */
+#define FB_VISUAL_MONO10 1 /* Monochr. 1=White 0=Black */
+#define FB_VISUAL_TRUECOLOR 2 /* True color */
+#define FB_VISUAL_PSEUDOCOLOR 3 /* Pseudo color (like atari) */
+#define FB_VISUAL_DIRECTCOLOR 4 /* Direct color */
+#define FB_VISUAL_STATIC_PSEUDOCOLOR 5 /* Pseudo color readonly */
+
+#define FB_ACCEL_NONE 0 /* no hardware accelerator */
+
+struct fb_fix_screeninfo {
+ char id[16]; /* identification string eg "TT Builtin" */
+ unsigned long smem_start; /* Start of frame buffer mem */
+ /* (physical address) */
+ __u32 smem_len; /* Length of frame buffer mem */
+ __u32 type; /* see FB_TYPE_* */
+ __u32 type_aux; /* Interleave for interleaved Planes */
+ __u32 visual; /* see FB_VISUAL_* */
+ __u16 xpanstep; /* zero if no hardware panning */
+ __u16 ypanstep; /* zero if no hardware panning */
+ __u16 ywrapstep; /* zero if no hardware ywrap */
+ __u32 line_length; /* length of a line in bytes */
+ unsigned long mmio_start; /* Start of Memory Mapped I/O */
+ /* (physical address) */
+ __u32 mmio_len; /* Length of Memory Mapped I/O */
+ __u32 accel; /* Indicate to driver which */
+ /* specific chip/card we have */
+ __u16 reserved[3]; /* Reserved for future compatibility */
+};
+
+/*
+ * Interpretation of offset for color fields: All offsets are from the right,
+ * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
+ * can use the offset as right argument to <<). A pixel afterwards is a bit
+ * stream and is written to video memory as that unmodified.
+ *
+ * For pseudocolor: offset and length should be the same for all color
+ * components. Offset specifies the position of the least significant bit
+ * of the pallette index in a pixel value. Length indicates the number
+ * of available palette entries (i.e. # of entries = 1 << length).
+ */
+struct fb_bitfield {
+ __u32 offset; /* beginning of bitfield */
+ __u32 length; /* length of bitfield */
+ __u32 msb_right;
+
+};
+
+#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */
+#define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */
+
+#define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/
+#define FB_ACTIVATE_NXTOPEN 1 /* activate on next open */
+#define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */
+#define FB_ACTIVATE_MASK 15
+ /* values */
+#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */
+#define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */
+#define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */
+#define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/
+#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */
+
+#define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */
+#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */
+#define FB_SYNC_EXT 4 /* external sync */
+#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */
+#define FB_SYNC_BROADCAST 16 /* broadcast video timings */
+ /* vtotal = 144d/288n/576i => PAL */
+ /* vtotal = 121d/242n/484i => NTSC */
+#define FB_SYNC_ON_GREEN 32 /* sync on green */
+
+#define FB_VMODE_NONINTERLACED 0 /* non interlaced */
+#define FB_VMODE_INTERLACED 1 /* interlaced */
+#define FB_VMODE_DOUBLE 2 /* double scan */
+#define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */
+#define FB_VMODE_MASK 255
+
+#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */
+#define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */
+#define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */
+
+/*
+ * Display rotation support
+ */
+#define FB_ROTATE_UR 0
+#define FB_ROTATE_CW 1
+#define FB_ROTATE_UD 2
+#define FB_ROTATE_CCW 3
+
+#define PICOS2KHZ(a) (1000000000UL/(a))
+#define KHZ2PICOS(a) (1000000000UL/(a))
+
+struct fb_var_screeninfo {
+ __u32 xres; /* visible resolution */
+ __u32 yres;
+ __u32 xres_virtual; /* virtual resolution */
+ __u32 yres_virtual;
+ __u32 xoffset; /* offset from virtual to visible */
+ __u32 yoffset; /* resolution */
+
+ __u32 bits_per_pixel; /* guess what */
+ __u32 grayscale; /* != 0 Graylevels instead of colors */
+
+ struct fb_bitfield red; /* bitfield in fb mem if true color, */
+ struct fb_bitfield green; /* else only length is significant */
+ struct fb_bitfield blue;
+ struct fb_bitfield transp; /* transparency */
+
+ __u32 nonstd; /* != 0 Non standard pixel format */
+
+ __u32 activate; /* see FB_ACTIVATE_* */
+
+ __u32 height; /* height of picture in mm */
+ __u32 width; /* width of picture in mm */
+
+ __u32 accel_flags; /* (OBSOLETE) see fb_info.flags */
+
+ /* Timing: All values in pixclocks, except pixclock (of course) */
+ __u32 pixclock; /* pixel clock in ps (pico seconds) */
+ __u32 left_margin; /* time from sync to picture */
+ __u32 right_margin; /* time from picture to sync */
+ __u32 upper_margin; /* time from sync to picture */
+ __u32 lower_margin;
+ __u32 hsync_len; /* length of horizontal sync */
+ __u32 vsync_len; /* length of vertical sync */
+ __u32 sync; /* see FB_SYNC_* */
+ __u32 vmode; /* see FB_VMODE_* */
+ __u32 rotate; /* angle we rotate counter clockwise */
+ __u32 reserved[5]; /* Reserved for future compatibility */
+};
+
+struct fb_cmap {
+ __u32 start; /* First entry */
+ __u32 len; /* Number of entries */
+ __u16 *red; /* Red values */
+ __u16 *green;
+ __u16 *blue;
+ __u16 *transp; /* transparency, can be NULL */
+};
+
+struct fb_con2fbmap {
+ __u32 console;
+ __u32 framebuffer;
+};
+
+/* VESA Blanking Levels */
+#define VESA_NO_BLANKING 0
+#define VESA_VSYNC_SUSPEND 1
+#define VESA_HSYNC_SUSPEND 2
+#define VESA_POWERDOWN 3
+
+
+enum {
+ /* screen: unblanked, hsync: on, vsync: on */
+ FB_BLANK_UNBLANK = VESA_NO_BLANKING,
+
+ /* screen: blanked, hsync: on, vsync: on */
+ FB_BLANK_NORMAL = VESA_NO_BLANKING + 1,
+
+ /* screen: blanked, hsync: on, vsync: off */
+ FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
+
+ /* screen: blanked, hsync: off, vsync: on */
+ FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1,
+
+ /* screen: blanked, hsync: off, vsync: off */
+ FB_BLANK_POWERDOWN = VESA_POWERDOWN + 1
+};
+
+#define FB_VBLANK_VBLANKING 0x001 /* currently in a vertical blank */
+#define FB_VBLANK_HBLANKING 0x002 /* currently in a horizontal blank */
+#define FB_VBLANK_HAVE_VBLANK 0x004 /* vertical blanks can be detected */
+#define FB_VBLANK_HAVE_HBLANK 0x008 /* horizontal blanks can be detected */
+#define FB_VBLANK_HAVE_COUNT 0x010 /* global retrace counter is available */
+#define FB_VBLANK_HAVE_VCOUNT 0x020 /* the vcount field is valid */
+#define FB_VBLANK_HAVE_HCOUNT 0x040 /* the hcount field is valid */
+#define FB_VBLANK_VSYNCING 0x080 /* currently in a vsync */
+#define FB_VBLANK_HAVE_VSYNC 0x100 /* verical syncs can be detected */
+
+struct fb_vblank {
+ __u32 flags; /* FB_VBLANK flags */
+ __u32 count; /* counter of retraces since boot */
+ __u32 vcount; /* current scanline position */
+ __u32 hcount; /* current scandot position */
+ __u32 reserved[4]; /* reserved for future compatibility */
+};
+
+/* Internal HW accel */
+#define ROP_COPY 0
+#define ROP_XOR 1
+
+struct fb_copyarea {
+ __u32 dx;
+ __u32 dy;
+ __u32 width;
+ __u32 height;
+ __u32 sx;
+ __u32 sy;
+};
+
+struct fb_fillrect {
+ __u32 dx; /* screen-relative */
+ __u32 dy;
+ __u32 width;
+ __u32 height;
+ __u32 color;
+ __u32 rop;
+};
+
+struct fb_image {
+ __u32 dx; /* Where to place image */
+ __u32 dy;
+ __u32 width; /* Size of image */
+ __u32 height;
+ __u32 fg_color; /* Only used when a mono bitmap */
+ __u32 bg_color;
+ __u8 depth; /* Depth of the image */
+ const char *data; /* Pointer to image data */
+ struct fb_cmap cmap; /* color map info */
+};
+
+/*
+ * hardware cursor control
+ */
+
+#define FB_CUR_SETIMAGE 0x01
+#define FB_CUR_SETPOS 0x02
+#define FB_CUR_SETHOT 0x04
+#define FB_CUR_SETCMAP 0x08
+#define FB_CUR_SETSHAPE 0x10
+#define FB_CUR_SETSIZE 0x20
+#define FB_CUR_SETALL 0xFF
+
+struct fbcurpos {
+ __u16 x, y;
+};
+
+struct fb_cursor {
+ __u16 set; /* what to set */
+ __u16 enable; /* cursor on/off */
+ __u16 rop; /* bitop operation */
+ const char *mask; /* cursor mask bits */
+ struct fbcurpos hot; /* cursor hot spot */
+ struct fb_image image; /* Cursor image */
+};
+
+#ifdef CONFIG_FB_BACKLIGHT
+/* Settings for the generic backlight code */
+#define FB_BACKLIGHT_LEVELS 128
+#define FB_BACKLIGHT_MAX 0xFF
+#endif
+
+#ifdef __KERNEL__
+
+struct vm_area_struct;
+struct fb_info;
+struct device;
+struct file;
+
+/* Definitions below are used in the parsed monitor specs */
+#define FB_DPMS_ACTIVE_OFF 1
+#define FB_DPMS_SUSPEND 2
+#define FB_DPMS_STANDBY 4
+
+#define FB_DISP_DDI 1
+#define FB_DISP_ANA_700_300 2
+#define FB_DISP_ANA_714_286 4
+#define FB_DISP_ANA_1000_400 8
+#define FB_DISP_ANA_700_000 16
+
+#define FB_DISP_MONO 32
+#define FB_DISP_RGB 64
+#define FB_DISP_MULTI 128
+#define FB_DISP_UNKNOWN 256
+
+#define FB_SIGNAL_NONE 0
+#define FB_SIGNAL_BLANK_BLANK 1
+#define FB_SIGNAL_SEPARATE 2
+#define FB_SIGNAL_COMPOSITE 4
+#define FB_SIGNAL_SYNC_ON_GREEN 8
+#define FB_SIGNAL_SERRATION_ON 16
+
+#define FB_MISC_PRIM_COLOR 1
+#define FB_MISC_1ST_DETAIL 2 /* First Detailed Timing is preferred */
+struct fb_chroma {
+ __u32 redx; /* in fraction of 1024 */
+ __u32 greenx;
+ __u32 bluex;
+ __u32 whitex;
+ __u32 redy;
+ __u32 greeny;
+ __u32 bluey;
+ __u32 whitey;
+};
+
+struct fb_monspecs {
+ struct fb_chroma chroma;
+ struct fb_videomode *modedb; /* mode database */
+ __u8 manufacturer[4]; /* Manufacturer */
+ __u8 monitor[14]; /* Monitor String */
+ __u8 serial_no[14]; /* Serial Number */
+ __u8 ascii[14]; /* ? */
+ __u32 modedb_len; /* mode database length */
+ __u32 model; /* Monitor Model */
+ __u32 serial; /* Serial Number - Integer */
+ __u32 year; /* Year manufactured */
+ __u32 week; /* Week Manufactured */
+ __u32 hfmin; /* hfreq lower limit (Hz) */
+ __u32 hfmax; /* hfreq upper limit (Hz) */
+ __u32 dclkmin; /* pixelclock lower limit (Hz) */
+ __u32 dclkmax; /* pixelclock upper limit (Hz) */
+ __u16 input; /* display type - see FB_DISP_* */
+ __u16 dpms; /* DPMS support - see FB_DPMS_ */
+ __u16 signal; /* Signal Type - see FB_SIGNAL_* */
+ __u16 vfmin; /* vfreq lower limit (Hz) */
+ __u16 vfmax; /* vfreq upper limit (Hz) */
+ __u16 gamma; /* Gamma - in fractions of 100 */
+ __u16 gtf : 1; /* supports GTF */
+ __u16 misc; /* Misc flags - see FB_MISC_* */
+ __u8 version; /* EDID version... */
+ __u8 revision; /* ...and revision */
+ __u8 max_x; /* Maximum horizontal size (cm) */
+ __u8 max_y; /* Maximum vertical size (cm) */
+};
+
+struct fb_cmap_user {
+ __u32 start; /* First entry */
+ __u32 len; /* Number of entries */
+ __u16 *red; /* Red values */
+ __u16 *green;
+ __u16 *blue;
+ __u16 *transp; /* transparency, can be NULL */
+};
+
+struct fb_image_user {
+ __u32 dx; /* Where to place image */
+ __u32 dy;
+ __u32 width; /* Size of image */
+ __u32 height;
+ __u32 fg_color; /* Only used when a mono bitmap */
+ __u32 bg_color;
+ __u8 depth; /* Depth of the image */
+ const char *data; /* Pointer to image data */
+ struct fb_cmap_user cmap; /* color map info */
+};
+
+struct fb_cursor_user {
+ __u16 set; /* what to set */
+ __u16 enable; /* cursor on/off */
+ __u16 rop; /* bitop operation */
+ const char *mask; /* cursor mask bits */
+ struct fbcurpos hot; /* cursor hot spot */
+ struct fb_image_user image; /* Cursor image */
+};
+
+/*
+ * Register/unregister for framebuffer events
+ */
+
+/* The resolution of the passed in fb_info about to change */
+#define FB_EVENT_MODE_CHANGE 0x01
+/* The display on this fb_info is beeing suspended, no access to the
+ * framebuffer is allowed any more after that call returns
+ */
+#define FB_EVENT_SUSPEND 0x02
+/* The display on this fb_info was resumed, you can restore the display
+ * if you own it
+ */
+#define FB_EVENT_RESUME 0x03
+/* An entry from the modelist was removed */
+#define FB_EVENT_MODE_DELETE 0x04
+/* A driver registered itself */
+#define FB_EVENT_FB_REGISTERED 0x05
+/* A driver unregistered itself */
+#define FB_EVENT_FB_UNREGISTERED 0x06
+/* CONSOLE-SPECIFIC: get console to framebuffer mapping */
+#define FB_EVENT_GET_CONSOLE_MAP 0x07
+/* CONSOLE-SPECIFIC: set console to framebuffer mapping */
+#define FB_EVENT_SET_CONSOLE_MAP 0x08
+/* A hardware display blank change occured */
+#define FB_EVENT_BLANK 0x09
+/* Private modelist is to be replaced */
+#define FB_EVENT_NEW_MODELIST 0x0A
+/* The resolution of the passed in fb_info about to change and
+ all vc's should be changed */
+#define FB_EVENT_MODE_CHANGE_ALL 0x0B
+/* A software display blank change occured */
+#define FB_EVENT_CONBLANK 0x0C
+/* Get drawing requirements */
+#define FB_EVENT_GET_REQ 0x0D
+/* Unbind from the console if possible */
+#define FB_EVENT_FB_UNBIND 0x0E
+
+struct fb_event {
+ struct fb_info *info;
+ void *data;
+};
+
+struct fb_blit_caps {
+ u32 x;
+ u32 y;
+ u32 len;
+ u32 flags;
+};
+
+/*
+ * Pixmap structure definition
+ *
+ * The purpose of this structure is to translate data
+ * from the hardware independent format of fbdev to what
+ * format the hardware needs.
+ */
+
+#define FB_PIXMAP_DEFAULT 1 /* used internally by fbcon */
+#define FB_PIXMAP_SYSTEM 2 /* memory is in system RAM */
+#define FB_PIXMAP_IO 4 /* memory is iomapped */
+#define FB_PIXMAP_SYNC 256 /* set if GPU can DMA */
+
+struct fb_pixmap {
+ u8 *addr; /* pointer to memory */
+ u32 size; /* size of buffer in bytes */
+ u32 offset; /* current offset to buffer */
+ u32 buf_align; /* byte alignment of each bitmap */
+ u32 scan_align; /* alignment per scanline */
+ u32 access_align; /* alignment per read/write (bits) */
+ u32 flags; /* see FB_PIXMAP_* */
+ u32 blit_x; /* supported bit block dimensions (1-32)*/
+ u32 blit_y; /* Format: blit_x = 1 << (width - 1) */
+ /* blit_y = 1 << (height - 1) */
+ /* if 0, will be set to 0xffffffff (all)*/
+ /* access methods */
+ void (*writeio)(struct fb_info *info, void *dst, void *src, unsigned int size);
+ void (*readio) (struct fb_info *info, void *dst, void *src, unsigned int size);
+};
+
+#ifdef CONFIG_FB_DEFERRED_IO
+struct fb_deferred_io {
+ /* delay between mkwrite and deferred handler */
+ unsigned long delay;
+ struct mutex lock; /* mutex that protects the page list */
+ struct list_head pagelist; /* list of touched pages */
+ /* callback */
+ void (*deferred_io)(struct fb_info *info, struct list_head *pagelist);
+};
+#endif
+
+/* FBINFO_* = fb_info.flags bit flags */
+#define FBINFO_MODULE 0x0001 /* Low-level driver is a module */
+#define FBINFO_HWACCEL_DISABLED 0x0002
+ /* When FBINFO_HWACCEL_DISABLED is set:
+ * Hardware acceleration is turned off. Software implementations
+ * of required functions (copyarea(), fillrect(), and imageblit())
+ * takes over; acceleration engine should be in a quiescent state */
+
+/* hints */
+#define FBINFO_PARTIAL_PAN_OK 0x0040 /* otw use pan only for double-buffering */
+#define FBINFO_READS_FAST 0x0080 /* soft-copy faster than rendering */
+
+/*
+ * A driver may set this flag to indicate that it does want a set_par to be
+ * called every time when fbcon_switch is executed. The advantage is that with
+ * this flag set you can really be sure that set_par is always called before
+ * any of the functions dependant on the correct hardware state or altering
+ * that state, even if you are using some broken X releases. The disadvantage
+ * is that it introduces unwanted delays to every console switch if set_par
+ * is slow. It is a good idea to try this flag in the drivers initialization
+ * code whenever there is a bug report related to switching between X and the
+ * framebuffer console.
+ */
+#define FBINFO_MISC_ALWAYS_SETPAR 0x40000
+
+/*
+ * Host and GPU endianness differ.
+ */
+#define FBINFO_FOREIGN_ENDIAN 0x100000
+/*
+ * Big endian math. This is the same flags as above, but with different
+ * meaning, it is set by the fb subsystem depending FOREIGN_ENDIAN flag
+ * and host endianness. Drivers should not use this flag.
+ */
+#define FBINFO_BE_MATH 0x100000
+
+struct fb_info {
+ int node;
+ int flags;
+ struct fb_var_screeninfo var; /* Current var */
+ struct fb_fix_screeninfo fix; /* Current fix */
+ struct fb_monspecs monspecs; /* Current Monitor specs */
+ struct fb_pixmap pixmap; /* Image hardware mapper */
+ struct fb_pixmap sprite; /* Cursor hardware mapper */
+ struct fb_cmap cmap; /* Current cmap */
+ struct list_head modelist; /* mode list */
+ struct fb_videomode *mode; /* current mode */
+
+ char *screen_base; /* Virtual address */
+ unsigned long screen_size; /* Amount of ioremapped VRAM or 0 */
+ void *pseudo_palette; /* Fake palette of 16 colors */
+#define FBINFO_STATE_RUNNING 0
+#define FBINFO_STATE_SUSPENDED 1
+ u32 state; /* Hardware state i.e suspend */
+ void *fbcon_par; /* fbcon use-only private area */
+ /* From here on everything is device dependent */
+ void *par;
+};
+
+#define FBINFO_DEFAULT 0
+
+#define FBINFO_FLAG_MODULE FBINFO_MODULE
+#define FBINFO_FLAG_DEFAULT FBINFO_DEFAULT
+
+// This will go away
+#if defined(__sparc__)
+
+/* We map all of our framebuffers such that big-endian accesses
+ * are what we want, so the following is sufficient.
+ */
+
+// This will go away
+#define fb_readb sbus_readb
+#define fb_readw sbus_readw
+#define fb_readl sbus_readl
+#define fb_readq sbus_readq
+#define fb_writeb sbus_writeb
+#define fb_writew sbus_writew
+#define fb_writel sbus_writel
+#define fb_writeq sbus_writeq
+#define fb_memset sbus_memset_io
+
+#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__avr32__) || defined(__bfin__)
+
+#define fb_readb __raw_readb
+#define fb_readw __raw_readw
+#define fb_readl __raw_readl
+#define fb_readq __raw_readq
+#define fb_writeb __raw_writeb
+#define fb_writew __raw_writew
+#define fb_writel __raw_writel
+#define fb_writeq __raw_writeq
+#define fb_memset memset_io
+
+#else
+
+#define fb_readb(addr) (*(volatile u8 *) (addr))
+#define fb_readw(addr) (*(volatile u16 *) (addr))
+#define fb_readl(addr) (*(volatile u32 *) (addr))
+#define fb_readq(addr) (*(volatile u64 *) (addr))
+#define fb_writeb(b,addr) (*(volatile u8 *) (addr) = (b))
+#define fb_writew(b,addr) (*(volatile u16 *) (addr) = (b))
+#define fb_writel(b,addr) (*(volatile u32 *) (addr) = (b))
+#define fb_writeq(b,addr) (*(volatile u64 *) (addr) = (b))
+#define fb_memset memset
+
+#endif
+
+#define FB_LEFT_POS(p, bpp) (fb_be_math(p) ? (32 - (bpp)) : 0)
+#define FB_SHIFT_HIGH(p, val, bits) (fb_be_math(p) ? (val) >> (bits) : \
+ (val) << (bits))
+#define FB_SHIFT_LOW(p, val, bits) (fb_be_math(p) ? (val) << (bits) : \
+ (val) >> (bits))
+/* drivers/video/fbmon.c */
+#define FB_MAXTIMINGS 0
+#define FB_VSYNCTIMINGS 1
+#define FB_HSYNCTIMINGS 2
+#define FB_DCLKTIMINGS 3
+#define FB_IGNOREMON 0x100
+
+#define FB_MODE_IS_UNKNOWN 0
+#define FB_MODE_IS_DETAILED 1
+#define FB_MODE_IS_STANDARD 2
+#define FB_MODE_IS_VESA 4
+#define FB_MODE_IS_CALCULATED 8
+#define FB_MODE_IS_FIRST 16
+#define FB_MODE_IS_FROM_VAR 32
+
+
+/* drivers/video/fbcmap.c */
+
+extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp);
+extern void fb_dealloc_cmap(struct fb_cmap *cmap);
+extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to);
+extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to);
+extern int fb_set_cmap(struct fb_cmap *cmap, struct fb_info *fb_info);
+extern int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *fb_info);
+extern const struct fb_cmap *fb_default_cmap(int len);
+extern void fb_invert_cmaps(void);
+
+struct fb_videomode {
+ const char *name; /* optional */
+ u32 refresh; /* optional */
+ u32 xres;
+ u32 yres;
+ u32 pixclock;
+ u32 left_margin;
+ u32 right_margin;
+ u32 upper_margin;
+ u32 lower_margin;
+ u32 hsync_len;
+ u32 vsync_len;
+ u32 sync;
+ u32 vmode;
+ u32 flag;
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_FB_H */
#include <asm/immap_85xx.h>
#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + offsetof(ccsr_pic_t, tfrr))
+#elif defined (CONFIG_MPC86xx)
+#include <asm/immap_86xx.h>
+#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + offsetof(ccsr_pic_t, tfrr))
+
#elif defined (CONFIG_4xx)
#define _POST_WORD_ADDR \
(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
* MA 02111-1307 USA
*/
-#include <common.h>
-
/*
* I2C test
*
* For verifying the I2C bus, a full I2C bus scanning is performed.
*
- * #ifdef I2C_ADDR_LIST
- * The test is considered as passed if all the devices and
- * only the devices in the list are found.
- * #else [ ! I2C_ADDR_LIST ]
+ * #ifdef CONFIG_SYS_POST_I2C_ADDRS
+ * The test is considered as passed if all the devices and only the devices
+ * in the list are found.
+ * #ifdef CONFIG_SYS_POST_I2C_IGNORES
+ * Ignore devices listed in CONFIG_SYS_POST_I2C_IGNORES. These devices
+ * are optional or not vital to board functionality.
+ * #endif
+ * #else [ ! CONFIG_SYS_POST_I2C_ADDRS ]
* The test is considered as passed if any I2C device is found.
* #endif
*/
+#include <common.h>
#include <post.h>
#include <i2c.h>
#if CONFIG_POST & CONFIG_SYS_POST_I2C
+static int i2c_ignore_device(unsigned int chip)
+{
+#ifdef CONFIG_SYS_POST_I2C_IGNORES
+ const unsigned char i2c_ignore_list[] = CONFIG_SYS_POST_I2C_IGNORES;
+ int i;
+
+ for (i = 0; i < sizeof(i2c_ignore_list); i++)
+ if (i2c_ignore_list[i] == chip)
+ return 1;
+#endif
+
+ return 0;
+}
+
int i2c_post_test (int flags)
{
unsigned int i;
- unsigned int good = 0;
-#ifdef I2C_ADDR_LIST
- unsigned int bad = 0;
+#ifndef CONFIG_SYS_POST_I2C_ADDRS
+ /* Start at address 1, address 0 is the general call address */
+ for (i = 1; i < 128; i++)
+ if (i2c_ignore_device(i))
+ continue;
+ if (i2c_probe (i) == 0)
+ return 0;
+
+ /* No devices found */
+ return -1;
+#else
+ unsigned int ret = 0;
int j;
- unsigned char i2c_addr_list[] = I2C_ADDR_LIST;
- unsigned char i2c_miss_list[] = I2C_ADDR_LIST;
-#endif
+ const unsigned char i2c_addr_list[] = CONFIG_SYS_POST_I2C_ADDRS;
- for (i = 0; i < 128; i++) {
- if (i2c_probe (i) == 0) {
-#ifndef I2C_ADDR_LIST
- good++;
-#else /* I2C_ADDR_LIST */
- for (j=0; j<sizeof(i2c_addr_list); ++j) {
- if (i == i2c_addr_list[j]) {
- good++;
- i2c_miss_list[j] = 0xFF;
- break;
- }
- }
- if (j == sizeof(i2c_addr_list)) {
- bad++;
- post_log ("I2C: addr %02X not expected\n",
- i);
+ /* Start at address 1, address 0 is the general call address */
+ for (i = 1; i < 128; i++) {
+ if (i2c_ignore_device(i))
+ continue;
+ if (i2c_probe(i) != 0)
+ continue;
+
+ for (j = 0; j < sizeof(i2c_addr_list); ++j) {
+ if (i == i2c_addr_list[j]) {
+ i2c_addr_list[j] = 0xff;
+ break;
}
-#endif /* I2C_ADDR_LIST */
}
- }
-#ifndef I2C_ADDR_LIST
- return good > 0 ? 0 : -1;
-#else /* I2C_ADDR_LIST */
- if (good != sizeof(i2c_addr_list)) {
- for (j=0; j<sizeof(i2c_miss_list); ++j) {
- if (i2c_miss_list[j] != 0xFF) {
- post_log ("I2C: addr %02X did not respond\n",
- i2c_miss_list[j]);
- }
+ if (j == sizeof(i2c_addr_list)) {
+ ret = -1;
+ post_log("I2C: addr %02x not expected\n", i);
}
}
- return ((good == sizeof(i2c_addr_list)) && (bad == 0)) ? 0 : -1;
+
+ for (i = 0; i < sizeof(i2c_addr_list); ++i) {
+ if (i2c_addr_list[i] == 0xff)
+ continue;
+ post_log("I2C: addr %02x did not respond\n", i2c_addr_list[i]);
+ ret = -1;
+ }
+
+ return ret;
#endif
}
projects / karo-tx-uboot.git / commitdiff