Changes for U-Boot 1.1.4:
======================================================================
+* Add support for MP2USB board.
+ Patch by Eric Benard, 07 Apr 2005
+
* Add board support for armadillo HT1070
Patch by Rowel Atienza, 06 Apr 2005
integratorcp_CM920T_ETM integratorcp_CM922T_XA10 \
integratorcp_CM926EJ_S integratorcp_CM940T \
integratorcp_CM946E_S integratorcp_CM966E_S \
- lpd7a400 mx1ads mx1fs2 omap1510inn \
- omap1610h2 omap1610inn omap730p2 scb9328 \
- smdk2400 smdk2410 trab VCMA9 \
- versatile voiceblue \
+ lpd7a400 mp2usb mx1ads mx1fs2 \
+ omap1510inn omap1610h2 omap1610inn omap730p2 \
+ scb9328 smdk2400 smdk2410 trab \
+ VCMA9 versatile voiceblue \
"
#########################################################################
cmc_pu2_config : unconfig
@./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
+mp2usb_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200
+
########################################################################
## ARM Integrator boards
## There are two variants /AP && /CP
--- /dev/null
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := mp2usb.o dm9161.o flash.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- /dev/null
+TEXT_BASE = 0x27F00000
+## For testing: load at 0x20100000 and "go" at 0x201000A4
+#TEXT_BASE = 0x20100000
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Author : Hamid Ikdoumi (Atmel)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <at91rm9200_net.h>
+#include <net.h>
+#include <dm9161.h>
+
+#ifdef CONFIG_DRIVER_ETHER
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+
+/*
+ * Name:
+ * dm9161_IsPhyConnected
+ * Description:
+ * Reads the 2 PHY ID registers
+ * Arguments:
+ * p_mac - pointer to AT91S_EMAC struct
+ * Return value:
+ * TRUE - if id read successfully
+ * FALSE- if error
+ */
+static unsigned int dm9161_IsPhyConnected (AT91PS_EMAC p_mac)
+{
+ unsigned short Id1, Id2;
+
+ at91rm9200_EmacEnableMDIO (p_mac);
+ at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID1, &Id1);
+ at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID2, &Id2);
+ at91rm9200_EmacDisableMDIO (p_mac);
+
+ if ((Id1 == (DM9161_PHYID1_OUI >> 6)) &&
+ ((Id2 >> 10) == (DM9161_PHYID1_OUI & DM9161_LSB_MASK)))
+ return TRUE;
+
+ return FALSE;
+}
+
+/*
+ * Name:
+ * dm9161_GetLinkSpeed
+ * Description:
+ * Link parallel detection status of MAC is checked and set in the
+ * MAC configuration registers
+ * Arguments:
+ * p_mac - pointer to MAC
+ * Return value:
+ * TRUE - if link status set succesfully
+ * FALSE - if link status not set
+ */
+static UCHAR dm9161_GetLinkSpeed (AT91PS_EMAC p_mac)
+{
+ unsigned short stat1, stat2;
+
+ if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &stat1))
+ return FALSE;
+
+ if (!(stat1 & DM9161_LINK_STATUS)) /* link status up? */
+ return FALSE;
+
+ if (!at91rm9200_EmacReadPhy (p_mac, DM9161_DSCSR, &stat2))
+ return FALSE;
+
+ if ((stat1 & DM9161_100BASE_TX_FD) && (stat2 & DM9161_100FDX)) {
+ /*set Emac for 100BaseTX and Full Duplex */
+ p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
+ return TRUE;
+ }
+
+ if ((stat1 & DM9161_10BASE_T_FD) && (stat2 & DM9161_10FDX)) {
+ /*set MII for 10BaseT and Full Duplex */
+ p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
+ ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
+ | AT91C_EMAC_FD;
+ return TRUE;
+ }
+
+ if ((stat1 & DM9161_100BASE_T4_HD) && (stat2 & DM9161_100HDX)) {
+ /*set MII for 100BaseTX and Half Duplex */
+ p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
+ ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
+ | AT91C_EMAC_SPD;
+ return TRUE;
+ }
+
+ if ((stat1 & DM9161_10BASE_T_HD) && (stat2 & DM9161_10HDX)) {
+ /*set MII for 10BaseT and Half Duplex */
+ p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
+ return TRUE;
+ }
+ return FALSE;
+}
+
+
+/*
+ * Name:
+ * dm9161_InitPhy
+ * Description:
+ * MAC starts checking its link by using parallel detection and
+ * Autonegotiation and the same is set in the MAC configuration registers
+ * Arguments:
+ * p_mac - pointer to struct AT91S_EMAC
+ * Return value:
+ * TRUE - if link status set succesfully
+ * FALSE - if link status not set
+ */
+static UCHAR dm9161_InitPhy (AT91PS_EMAC p_mac)
+{
+ UCHAR ret = TRUE;
+ unsigned short IntValue;
+
+ at91rm9200_EmacEnableMDIO (p_mac);
+
+ if (!dm9161_GetLinkSpeed (p_mac)) {
+ /* Try another time */
+ ret = dm9161_GetLinkSpeed (p_mac);
+ }
+
+ /* Disable PHY Interrupts */
+ at91rm9200_EmacReadPhy (p_mac, DM9161_MDINTR, &IntValue);
+ /* clear FDX, SPD, Link, INTR masks */
+ IntValue &= ~(DM9161_FDX_MASK | DM9161_SPD_MASK |
+ DM9161_LINK_MASK | DM9161_INTR_MASK);
+ at91rm9200_EmacWritePhy (p_mac, DM9161_MDINTR, &IntValue);
+ at91rm9200_EmacDisableMDIO (p_mac);
+
+ return (ret);
+}
+
+
+/*
+ * Name:
+ * dm9161_AutoNegotiate
+ * Description:
+ * MAC Autonegotiates with the partner status of same is set in the
+ * MAC configuration registers
+ * Arguments:
+ * dev - pointer to struct net_device
+ * Return value:
+ * TRUE - if link status set successfully
+ * FALSE - if link status not set
+ */
+static UCHAR dm9161_AutoNegotiate (AT91PS_EMAC p_mac, int *status)
+{
+ unsigned short value;
+ unsigned short PhyAnar;
+ unsigned short PhyAnalpar;
+
+ /* Set dm9161 control register */
+ if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value))
+ return FALSE;
+ value &= ~DM9161_AUTONEG; /* remove autonegotiation enable */
+ value |= DM9161_ISOLATE; /* Electrically isolate PHY */
+ if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
+ return FALSE;
+
+ /* Set the Auto_negotiation Advertisement Register */
+ /* MII advertising for Next page, 100BaseTxFD and HD, 10BaseTFD and HD, IEEE 802.3 */
+ PhyAnar = DM9161_NP | DM9161_TX_FDX | DM9161_TX_HDX |
+ DM9161_10_FDX | DM9161_10_HDX | DM9161_AN_IEEE_802_3;
+ if (!at91rm9200_EmacWritePhy (p_mac, DM9161_ANAR, &PhyAnar))
+ return FALSE;
+
+ /* Read the Control Register */
+ if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value))
+ return FALSE;
+
+ value |= DM9161_SPEED_SELECT | DM9161_AUTONEG | DM9161_DUPLEX_MODE;
+ if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
+ return FALSE;
+ /* Restart Auto_negotiation */
+ value |= DM9161_RESTART_AUTONEG;
+ if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
+ return FALSE;
+
+ /*check AutoNegotiate complete */
+ udelay (10000);
+ at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &value);
+ if (!(value & DM9161_AUTONEG_COMP))
+ return FALSE;
+
+ /* Get the AutoNeg Link partner base page */
+ if (!at91rm9200_EmacReadPhy (p_mac, DM9161_ANLPAR, &PhyAnalpar))
+ return FALSE;
+
+ if ((PhyAnar & DM9161_TX_FDX) && (PhyAnalpar & DM9161_TX_FDX)) {
+ /*set MII for 100BaseTX and Full Duplex */
+ p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
+ return TRUE;
+ }
+
+ if ((PhyAnar & DM9161_10_FDX) && (PhyAnalpar & DM9161_10_FDX)) {
+ /*set MII for 10BaseT and Full Duplex */
+ p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
+ ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
+ | AT91C_EMAC_FD;
+ return TRUE;
+ }
+ return FALSE;
+}
+
+
+/*
+ * Name:
+ * at91rm92000_GetPhyInterface
+ * Description:
+ * Initialise the interface functions to the PHY
+ * Arguments:
+ * None
+ * Return value:
+ * None
+ */
+void at91rm92000_GetPhyInterface(AT91PS_PhyOps p_phyops)
+{
+ p_phyops->Init = dm9161_InitPhy;
+ p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
+ p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
+ p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
+}
+
+#endif /* CONFIG_COMMANDS & CFG_CMD_NET */
+
+#endif /* CONFIG_DRIVER_ETHER */
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Modified for the MP2USB by (C) Copyright 2005 Eric Benard
+ * ebenard@eukrea.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/byteorder/swab.h>
+
+#define CFG_MAX_FLASH_BANKS 1
+#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#define FLASH_PORT_WIDTH ushort
+#define FLASH_PORT_WIDTHV vu_short
+#define SWAP(x) __swab16(x)
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+/* Intel-compatible flash commands */
+#define INTEL_PROGRAM 0x00100010
+#define INTEL_ERASE 0x00200020
+#define INTEL_PROG 0x00400040
+#define INTEL_CLEAR 0x00500050
+#define INTEL_LOCKBIT 0x00600060
+#define INTEL_PROTECT 0x00010001
+#define INTEL_STATUS 0x00700070
+#define INTEL_READID 0x00900090
+#define INTEL_SUSPEND 0x00B000B0
+#define INTEL_CONFIRM 0x00D000D0
+#define INTEL_RESET 0xFFFFFFFF
+
+/* Intel-compatible flash status bits */
+#define INTEL_FINISHED 0x00800080
+#define INTEL_OK 0x00800080
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (FPW *addr, flash_info_t *info);
+static int write_data (flash_info_t *info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+void inline spin_wheel (void);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ int i;
+ ulong size = 0;
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ switch (i) {
+ case 0:
+ flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+ flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+ break;
+ default:
+ panic ("configured too many flash banks!\n");
+ break;
+ }
+ size += flash_info[i].size;
+ }
+
+ /* Protect monitor and environment sectors
+ */
+ flash_protect ( FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + monitor_flash_len - 1,
+ &flash_info[0] );
+
+ flash_protect ( FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+ info->protect[i] = 0;
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL:
+ printf ("INTEL ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F640J3A:
+ printf ("28F640J3A\n");
+ break;
+ case FLASH_28F128J3A:
+ printf ("28F128J3A\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+ return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW *addr, flash_info_t *info)
+{
+ volatile FPW value;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x5555] = (FPW) 0x00AA00AA;
+ addr[0x2AAA] = (FPW) 0x00550055;
+ addr[0x5555] = (FPW) 0x00900090;
+
+ mb ();
+ value = addr[0];
+
+ switch (value) {
+
+ case (FPW) INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ addr[0] = (FPW) INTEL_RESET; /* restore read mode */
+ return (0); /* no or unknown flash */
+ }
+
+ mb ();
+ value = addr[1]; /* device ID */
+
+ switch (value) {
+
+ case (FPW) INTEL_ID_28F640J3A:
+ info->flash_id += FLASH_28F640J3A;
+ info->sector_count = 64;
+ info->size = 0x00800000;
+ break; /* => 8 MB */
+
+ case (FPW) INTEL_ID_28F128J3A:
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = 128;
+ info->size = 0x01000000;
+ break; /* => 16 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ addr[0] = (FPW) INTEL_RESET; /* restore read mode */
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong type, start, last;
+ int rcode = 0;
+ int cflag, iflag;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ type = (info->flash_id & FLASH_VENDMASK);
+ if ((type != FLASH_MAN_INTEL)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ start = get_timer (0);
+ last = start;
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+ cflag = icache_status ();
+ icache_disable ();
+ iflag = disable_interrupts ();
+
+ /* Disable interrupts which might cause a timeout here */
+/* flag = disable_interrupts (); */
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ FPWV *addr = (FPWV *) (info->start[sect]);
+ FPW status;
+
+ printf ("Erasing sector %2d ... ", sect);
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ *addr = (FPW) INTEL_CLEAR; /* clear status register */
+ *addr = (FPW) INTEL_ERASE; /* erase setup */
+ *addr = (FPW) INTEL_CONFIRM; /* erase confirm */
+
+ while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = (FPW) INTEL_SUSPEND; /* suspend erase */
+ *addr = (FPW) INTEL_RESET; /* reset to read mode */
+ rcode = 1;
+ break;
+ }
+ }
+
+ *addr = INTEL_CLEAR; /* clear status register cmd. */
+ *addr = INTEL_RESET; /* resest to read mode */
+
+ printf (" done\n");
+ }
+ }
+
+ if (iflag)
+ enable_interrupts ();
+
+ if (cflag)
+ icache_enable ();
+
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp;
+ FPW data;
+ int count, i, l, rc, port_width;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+
+ /* get lower word aligned address */
+ wp = (addr & ~1);
+ port_width = 2;
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < port_width && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ count = 0;
+ while (cnt >= port_width) {
+ data = 0;
+ for (i = 0; i < port_width; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ cnt -= port_width;
+ if (count++ > 0x800) {
+ spin_wheel ();
+ count = 0;
+ }
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return (write_data (info, wp, SWAP (data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, ulong dest, FPW data)
+{
+ FPWV *addr = (FPWV *) dest;
+ ulong status;
+ int cflag, iflag;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
+ return (2);
+ }
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+ cflag = icache_status ();
+ icache_disable ();
+ iflag = disable_interrupts ();
+
+ /* Disable interrupts which might cause a timeout here */
+ /*flag = disable_interrupts (); */
+
+ *addr = (FPW) INTEL_PROG; /* write setup */
+ *addr = data;
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ /* wait while polling the status register */
+ while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
+ if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ *addr = (FPW) INTEL_RESET; /* restore read mode */
+ return (1);
+ }
+ }
+
+ *addr = (FPW) INTEL_RESET; /* restore read mode */
+
+ if (iflag)
+ enable_interrupts ();
+
+ if (cflag)
+ icache_enable ();
+
+ return (0);
+}
+
+void inline spin_wheel (void)
+{
+ static int p = 0;
+ static char w[] = "\\/-";
+
+ printf ("\010%c", w[p]);
+ (++p == 3) ? (p = 0) : 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Set/Clear sector's lock bit, returns:
+ * 0 - OK
+ * 1 - Error (timeout, voltage problems, etc.)
+ */
+int flash_real_protect(flash_info_t *info, long sector, int prot)
+{
+ int i;
+ int rc = 0;
+ FPWV *addr = (FPWV *)(info->start[sector]);
+ int flag = disable_interrupts();
+
+ *addr = (FPW) INTEL_CLEAR; /* Clear status register */
+ if (prot) { /* Set sector lock bit */
+ *addr = (FPW) INTEL_LOCKBIT; /* Sector lock bit */
+ *addr = (FPW) INTEL_PROTECT; /* set */
+ }
+ else { /* Clear sector lock bit */
+ *addr = (FPW) INTEL_LOCKBIT; /* All sectors lock bits */
+ *addr = (FPW) INTEL_CONFIRM; /* clear */
+ }
+
+ reset_timer_masked ();
+
+ while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
+ if (get_timer_masked () > CFG_FLASH_UNLOCK_TOUT) {
+ printf("Flash lock bit operation timed out\n");
+ rc = 1;
+ break;
+ }
+ }
+
+ if (*addr != (FPW) INTEL_OK) {
+ printf("Flash lock bit operation failed at %08X, CSR=%08X\n",
+ (uint)addr, (uint)*addr);
+ rc = 1;
+ }
+
+ if (!rc)
+ info->protect[sector] = prot;
+
+ /*
+ * Clear lock bit command clears all sectors lock bits, so
+ * we have to restore lock bits of protected sectors.
+ */
+ if (!prot)
+ {
+ for (i = 0; i < info->sector_count; i++)
+ {
+ if (info->protect[i])
+ {
+ reset_timer_masked ();
+ addr = (FPWV *) (info->start[i]);
+ *addr = (FPW) INTEL_LOCKBIT; /* Sector lock bit */
+ *addr = (FPW) INTEL_PROTECT; /* set */
+ while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED)
+ {
+ if (get_timer_masked () > CFG_FLASH_UNLOCK_TOUT)
+ {
+ printf("Flash lock bit operation timed out\n");
+ rc = 1;
+ break;
+ }
+ }
+ }
+ }
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ *addr = (FPW) INTEL_RESET; /* Reset to read array mode */
+
+ return rc;
+}
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Modified for the MP2USB by (C) Copyright 2005 Eric Benard
+ * ebenard@eukrea.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/AT91RM9200.h>
+#include <asm/mach-types.h>
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* Enable Ctrlc */
+ console_init_f ();
+
+ /* memory and cpu-speed are setup before relocation */
+ /* so we do _nothing_ here */
+
+ /* arch number of MP2USB-Board. */
+ gd->bd->bi_arch_number = MACH_TYPE_MP2USB;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ return 0;
+}
+
+int dram_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm920t/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
--- /dev/null
+/*
+ * 2004-2005 Gary Jennejohn <garyj@denx.de>
+ *
+ * Modified for the MP2USB by (C) Copyright 2005 Eric Benard
+ * ebenard@eukrea.com
+ *
+ * Configuration settings for the MP2USB board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 45) */
+#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */
+
+#define AT91_SLOW_CLOCK 32768 /* slow clock */
+
+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
+#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
+#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
+#define CONFIG_MP2USB 1 /* on an MP2USB Board */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define USE_920T_MMU 1
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CFG_ATMEL_PLL_INIT_BUG 1
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#define CFG_USE_MAIN_OSCILLATOR 1
+/* flash */
+#define MC_PUIA_VAL 0x00000000
+#define MC_PUP_VAL 0x00000000
+#define MC_PUER_VAL 0x00000000
+#define MC_ASR_VAL 0x00000000
+#define MC_AASR_VAL 0x00000000
+#define EBI_CFGR_VAL 0x00000000
+#define SMC2_CSR_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */
+
+/* clocks */
+#define PLLAR_VAL 0x20263E04 /* 180 MHz for PCK */
+#define PLLBR_VAL 0x10483E0E /* 48 MHz (divider by 2 for USB) */
+#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */
+
+/* sdram */
+#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
+#define PIOC_BSR_VAL 0x00000000
+#define PIOC_PDR_VAL 0xFFFF0000
+#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
+#define SDRC_CR_VAL 0x3211295A /* set up the SDRAM */
+#define SDRAM 0x20000000 /* address of the SDRAM */
+#define SDRAM1 0x20000020 /* address of the SDRAM */
+#define SDRAM_VAL 0x00000000 /* value written to SDRAM */
+#define SDRC_MR_VAL 0x00000002 /* Precharge All */
+#define SDRC_MR_VAL1 0x00000004 /* refresh */
+#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
+#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
+#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+#define CONFIG_BAUDRATE 115200
+
+#define CFG_AT91C_BRGR_DIVISOR 33 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK /(baudrate * 16) */
+
+/*
+ * Hardware drivers
+ */
+
+/* define one of these to choose the DBGU, USART0 or USART1 as console */
+#define CONFIG_DBGU
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+
+#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
+
+#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
+
+#undef CONFIG_HARD_I2C
+
+#ifdef CONFIG_HARD_I2C
+#define CFG_I2C_SPEED 0 /* not used */
+#define CFG_I2C_SLAVE 0 /* not used */
+#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */
+#define CFG_I2C_RTC_ADDR 0x32
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW
+#endif
+/* still about 20 kB free with this defined */
+#define CFG_LONGHELP
+
+#define CONFIG_BOOTDELAY 3
+
+#ifdef CONFIG_HARD_I2C
+#define CONFIG_COMMANDS \
+ ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP | \
+ CFG_CMD_MISC))
+#else
+#define CONFIG_COMMANDS \
+ ((CONFIG_CMD_DFL | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_NFS | \
+ CFG_CMD_SNTP | \
+ CFG_CMD_CACHE) & \
+ ~(CFG_CMD_BDI | \
+ CFG_CMD_IMI | \
+ CFG_CMD_AUTOSCRIPT | \
+ CFG_CMD_FPGA | \
+ CFG_CMD_MISC | \
+ CFG_CMD_LOADS ))
+#define CONFIG_TIMESTAMP
+#endif
+#define CFG_LONGHELP
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x20000000
+#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
+
+#define CFG_MEMTEST_START PHYS_SDRAM
+#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
+
+#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_RETRY_COUNT 20
+#undef CONFIG_AT91C_USE_RMII
+
+#define PHYS_FLASH_1 0x10000000
+#define PHYS_FLASH_SIZE 0x1000000 /* 16 megs main flash */
+#define CFG_FLASH_BASE PHYS_FLASH_1
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 256
+#define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */
+#define CFG_FLASH_LOCK_TOUT (10*CFG_HZ) /* Timeout for Flash Set Lock Bit */
+#define CFG_FLASH_UNLOCK_TOUT (10*CFG_HZ) /* Timeout for Flash Clear Lock Bits */
+#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_OFFSET 0x20000 /* after u-boot.bin */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE 0x20000
+
+#define CFG_LOAD_ADDR 0x21000000 /* default load address */
+
+#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
+
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_MAXARGS 32 /* max number of command args */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+
+#ifndef __ASSEMBLY__
+/*-----------------------------------------------------------------------
+ * Board specific extension for bd_info
+ *
+ * This structure is embedded in the global bd_info (bd_t) structure
+ * and can be used by the board specific code (eg board/...)
+ */
+
+struct bd_info_ext {
+ /* helper variable for board environment handling
+ *
+ * env_crc_valid == 0 => uninitialised
+ * env_crc_valid > 0 => environment crc in flash is valid
+ * env_crc_valid < 0 => environment crc in flash is invalid
+ */
+ int env_crc_valid;
+};
+#endif /* __ASSEMBLY__ */
+
+#define CFG_HZ 1000
+#define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */
+ /* AT91C_TC_TIMER_DIV1_CLOCK */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#define CFG_DEVICE_NULLDEV 1 /* enble null device */
+#undef CONFIG_SILENT_CONSOLE /* enable silent startup */
+
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#endif /* __CONFIG_H */
projects / karo-tx-uboot.git / commitdiff