]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
85xx: Add a 36-bit physical configuration for MPC8572DS
authorKumar Gala <galak@kernel.crashing.org>
Fri, 23 Jan 2009 20:22:14 +0000 (14:22 -0600)
committerAndrew Fleming-AFLEMING <afleming@freescale.com>
Fri, 23 Jan 2009 23:09:18 +0000 (17:09 -0600)
We move all IO addressed (CCSR, localbus, PCI) above the 4G boundary
to allow for larger memory sizes.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
MAKEALL
Makefile
include/configs/MPC8572DS.h

diff --git a/MAKEALL b/MAKEALL
index f6271a29f1f77ccf09de0e9e18435fad1b5d3c9b..49d5d2f769409ee44174f302f8e4de352d25aa40 100755 (executable)
--- a/MAKEALL
+++ b/MAKEALL
@@ -372,6 +372,7 @@ LIST_85xx="         \
        MPC8560ADS      \
        MPC8568MDS      \
        MPC8572DS       \
+       MPC8572DS_36BIT \
        PM854           \
        PM856           \
        sbc8540         \
index 5cc950dea5f32762a24f0dc5380d5fbc02c462ab..ad79a2a6a12a252f20b378ce3403c952e86426e1 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -2398,8 +2398,14 @@ MPC8555CDS_config:       unconfig
 MPC8568MDS_config:     unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
 
+MPC8572DS_36BIT_config \
 MPC8572DS_config:       unconfig
-       @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8572ds freescale
+       @mkdir -p $(obj)include
+       @if [ "$(findstring _36BIT_,$@)" ] ; then \
+               echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
+               $(XECHO) "... enabling 36-bit physical addressing." ; \
+       fi
+       @$(MKCONFIG) -a MPC8572DS ppc mpc85xx mpc8572ds freescale
 
 PM854_config:  unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
index a0f4fcccbf6e4f670a9859d46ffc611f39524c5a..ac0a4641e9e3de3906aabf2137b07b95af650ff0 100644 (file)
@@ -75,6 +75,11 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 
 #define CONFIG_ENABLE_36BIT_PHYS       1
 
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_ADDR_MAP                        1
+#define CONFIG_SYS_NUM_ADDR_MAP                16      /* number of TLB1 entries */
+#endif
+
 #define CONFIG_SYS_MEMTEST_START       0x00000000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x7fffffff
 #define CONFIG_PANIC_HANG      /* do not reset board on panic */
@@ -85,7 +90,11 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  */
 #define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */
 #define CONFIG_SYS_CCSRBAR             0xffe00000      /* relocated CCSRBAR */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_CCSRBAR_PHYS                0xfffe00000ull  /* physical addr of CCSRBAR */
+#else
 #define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
+#endif
 #define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
 
 #define CONFIG_SYS_PCIE3_ADDR          (CONFIG_SYS_CCSRBAR+0x8000)
@@ -170,7 +179,11 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  * Local Bus Definitions
  */
 #define CONFIG_SYS_FLASH_BASE          0xe0000000      /* start of FLASH 128M */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_FLASH_BASE_PHYS     0xfe0000000ull
+#else
 #define CONFIG_SYS_FLASH_BASE_PHYS     CONFIG_SYS_FLASH_BASE
+#endif
 
 #define CONFIG_SYS_BR0_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V)
 #define CONFIG_SYS_OR0_PRELIM  0xf8000ff7
@@ -178,7 +191,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_BR1_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 #define CONFIG_SYS_OR1_PRELIM  0xf8000ff7
 
-#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE + 0x8000000, CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 
@@ -199,7 +212,11 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 
 #define CONFIG_FSL_PIXIS       1       /* use common PIXIS code */
 #define PIXIS_BASE     0xffdf0000      /* PIXIS registers */
+#ifdef CONFIG_PHYS_64BIT
+#define PIXIS_BASE_PHYS        0xfffdf0000ull
+#else
 #define PIXIS_BASE_PHYS        PIXIS_BASE
+#endif
 
 #define CONFIG_SYS_BR3_PRELIM  (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 #define CONFIG_SYS_OR3_PRELIM          0xffffeff7      /* 32KB but only 4k mapped */
@@ -264,7 +281,11 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_MALLOC_LEN          (1024 * 1024)   /* Reserved for malloc */
 
 #define CONFIG_SYS_NAND_BASE           0xffa00000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS      0xfffa00000ull
+#else
 #define CONFIG_SYS_NAND_BASE_PHYS      CONFIG_SYS_NAND_BASE
+#endif
 #define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
                                CONFIG_SYS_NAND_BASE + 0x40000, \
                                CONFIG_SYS_NAND_BASE + 0x80000,\
@@ -383,31 +404,55 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
 #define CONFIG_SYS_PCIE3_MEM_VIRT      0x80000000
 #define CONFIG_SYS_PCIE3_MEM_BUS       0x80000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_MEM_PHYS      0xc00000000ull
+#else
 #define CONFIG_SYS_PCIE3_MEM_PHYS      0x80000000
+#endif
 #define CONFIG_SYS_PCIE3_MEM_SIZE      0x20000000      /* 512M */
 #define CONFIG_SYS_PCIE3_IO_VIRT       0xffc00000
 #define CONFIG_SYS_PCIE3_IO_BUS        0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_IO_PHYS       0xfffc00000ull
+#else
 #define CONFIG_SYS_PCIE3_IO_PHYS       0xffc00000
+#endif
 #define CONFIG_SYS_PCIE3_IO_SIZE       0x00010000      /* 64k */
 
 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 #define CONFIG_SYS_PCIE2_MEM_VIRT      0xa0000000
 #define CONFIG_SYS_PCIE2_MEM_BUS       0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_MEM_PHYS      0xc20000000ull
+#else
 #define CONFIG_SYS_PCIE2_MEM_PHYS      0xa0000000
+#endif
 #define CONFIG_SYS_PCIE2_MEM_SIZE      0x20000000      /* 512M */
 #define CONFIG_SYS_PCIE2_IO_VIRT       0xffc10000
 #define CONFIG_SYS_PCIE2_IO_BUS        0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_IO_PHYS       0xfffc10000ull
+#else
 #define CONFIG_SYS_PCIE2_IO_PHYS       0xffc10000
+#endif
 #define CONFIG_SYS_PCIE2_IO_SIZE       0x00010000      /* 64k */
 
 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 #define CONFIG_SYS_PCIE1_MEM_VIRT      0xc0000000
 #define CONFIG_SYS_PCIE1_MEM_BUS       0xc0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_PHYS      0xc40000000ull
+#else
 #define CONFIG_SYS_PCIE1_MEM_PHYS      0xc0000000
+#endif
 #define CONFIG_SYS_PCIE1_MEM_SIZE      0x20000000      /* 512M */
 #define CONFIG_SYS_PCIE1_IO_VIRT       0xffc20000
 #define CONFIG_SYS_PCIE1_IO_BUS        0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_IO_PHYS       0xfffc20000ull
+#else
 #define CONFIG_SYS_PCIE1_IO_PHYS       0xffc20000
+#endif
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 
 #if defined(CONFIG_PCI)