]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
mpc85xx/t102xqds: convert deep sleep to generic board interface
authortang yuantian <Yuantian.Tang@freescale.com>
Thu, 18 Dec 2014 01:55:07 +0000 (09:55 +0800)
committerYork Sun <yorksun@freescale.com>
Fri, 16 Jan 2015 17:31:26 +0000 (09:31 -0800)
A new deep sleep interface is introduced to support generic
board structure. Converts it to use new interface.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
board/freescale/t102xqds/ddr.c
board/freescale/t102xqds/t102xqds.c
include/configs/T102xQDS.h

index 46fc64e5280343e36a09c07d4f13fd98ee987d35..2d4d10f351a1082a8eabc47ce19fc132e6314829 100644 (file)
@@ -11,6 +11,7 @@
 #include <fsl_ddr_sdram.h>
 #include <fsl_ddr_dimm_params.h>
 #include <asm/fsl_law.h>
+#include <asm/mpc85xx_gpio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -152,6 +153,19 @@ found:
 #endif
 }
 
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void)
+{
+       void __iomem *qixis_base = (void *)QIXIS_BASE;
+
+       /* does not provide HW signals for power management */
+       clrbits_8(qixis_base + 0x21, 0x2);
+       /* Disable MCKE isolation */
+       gpio_set_value(2, 0);
+       udelay(1);
+}
+#endif
+
 phys_size_t initdram(int board_type)
 {
        phys_size_t dram_size;
@@ -166,5 +180,10 @@ phys_size_t initdram(int board_type)
        /* DDR has been initialised by first stage boot loader */
        dram_size =  fsl_ddr_sdram_size();
 #endif
+
+#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
+       fsl_dp_resume();
+#endif
+
        return dram_size;
 }
index f3141b58e8d05f9a7726c317236dfbcdc9345709..708afcaebfacb4cb22ae214027e264fcb4b4c15d 100644 (file)
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include <hwconfig.h>
-#include <asm/mpc85xx_gpio.h>
 #include "../common/qixis.h"
 #include "t102xqds.h"
 #include "t102xqds_qixis.h"
+#include "../common/sleep.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -242,6 +242,16 @@ void board_retimer_ds125df111_init(void)
        i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
 }
 
+int board_early_init_f(void)
+{
+#if defined(CONFIG_DEEP_SLEEP)
+       if (is_warm_boot())
+               fsl_dp_disable_console();
+#endif
+
+       return 0;
+}
+
 int board_early_init_r(void)
 {
 #ifdef CONFIG_SYS_FLASH_BASE
@@ -395,14 +405,3 @@ void qixis_dump_switch(void)
                printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
        }
 }
-
-#ifdef CONFIG_DEEP_SLEEP
-void board_mem_sleep_setup(void)
-{
-       /* does not provide HW signals for power management */
-       QIXIS_WRITE(pwr_ctl[1], (QIXIS_READ(pwr_ctl[1]) & ~0x2));
-       /* Disable MCKE isolation */
-       gpio_set_value(2, 0);
-       udelay(1);
-}
-#endif
index c2bdbb99eda9d28b46422672707179f627a33265..3f02cede3201f0d021aab3d35caf8fa632400fa2 100644 (file)
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_DEEP_SLEEP
+#if defined(CONFIG_DEEP_SLEEP)
 #define CONFIG_SILENT_CONSOLE
+#define CONFIG_BOARD_EARLY_INIT_F
+#endif
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg