/u-boot.sha1
/u-boot.dis
/u-boot.lds
+/u-boot.lst
/u-boot.ubl
/u-boot.ais
/u-boot.dtb
E: obrown@adventnetworks.com
D: Port to the gw8260 board
-N: Curt Brune
-E: curt@cucy.com
-D: Added support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
-W: http://www.cucy.com
-
N: Jonathan De Bruyne
E: jonathan.debruyne@siemens.atea.be
D: Port to Siemens IAD210 board
ARIA MPC5121e
- AMX860 MPC860
- ETX094 MPC850
FPS850L MPC850
FPS860L MPC860
ICU862 MPC862
IVMS8 MPC860
IVMS8_128 MPC860
IVMS8_256 MPC860
- LANTEC MPC850
LWMON MPC823
R360MPI MPC823
RRvision MPC823
TQM855L MPC855
TQM860L MPC860
TQM860L_FEC MPC860
- c2mon MPC855
hermes MPC860
lwmon MPC823
Paul Gortmaker <paul.gortmaker@windriver.com>
sbc8349 MPC8349
- sbc8540 MPC8540
sbc8548 MPC8548
- sbc8560 MPC8560
sbc8641d MPC8641D
Frank Gottschling <fgottschling@eltec.de>
PN62 MPC8240
IPHASE4539 MPC8260
- SCM MPC8260
Anatolij Gustschin <agust@denx.de>
FADS850SAR MPC8xx
FADS860T MPC8xx
GENIETV MPC8xx
- IAD210 MPC8xx
MBX MPC8xx
MBX860T MPC8xx
NX823 MPC8xx
edminiv2 ARM926EJS (Orion5x SoC)
+Raphael Assenat <raph@8d.com>
+
+ eco5pk ARM ARMV7 (AM35x SoC)
+
Stefano Babic <sbabic@denx.de>
ea20 davinci
vision2 i.MX51
woodburn i.MX35
+Lukasz Dalek <luk0104@gmail.com>
+
+ h2200 xscale/pxa
+
Jason Liu <r64343@freescale.com>
mx53evk i.MX53
zynq ARM ARMV7 (Zynq SoC)
+Lucas Stach <dev@lynxeye.de>
+
+ colibri_t20_iris Tegra20 (ARM7 & A9 Dual Core)
+
Nick Thompson <nick.thompson@gefanuc.com>
da830evm ARM926EJS (DA830/OMAP-L137)
armadillo-800eva R8A7740 (RMOBILE SoC)
+Pali Rohár <pali.rohar@gmail.com>
+
+ nokia_rx51 ARM ARMV7 (OMAP34xx SoC)
+
-------------------------------------------------------------------------
Unknown / orphaned boards:
fi
if [ $BUILD_MANY == 1 ] ; then
- ${MAKE} tidy
+ ${MAKE} -s tidy
if [ -s ${LOG_DIR}/${target}.ERR ] ; then
cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
# MA 02111-1307 USA
#
-VERSION = 2012
-PATCHLEVEL = 10
+VERSION = 2013
+PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc1
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
endif
LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o
LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o
-LIBS-y += fs/cramfs/libcramfs.o \
+LIBS-y += fs/libfs.o \
+ fs/cbfs/libcbfs.o \
+ fs/cramfs/libcramfs.o \
fs/ext4/libext4fs.o \
fs/fat/libfat.o \
fs/fdos/libfdos.o \
ifeq ($(SOC),tegra20)
ifeq ($(CONFIG_OF_SEPARATE),y)
-$(obj)u-boot-dtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(obj)u-boot.dtb
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
- cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(obj)u-boot.dtb > $@
- rm $(obj)spl/u-boot-spl-pad.bin
+nodtb=dtb
+dtbfile=$(obj)u-boot.dtb
else
-$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+nodtb=nodtb
+dtbfile=
+endif
+
+$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile)
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
- cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
+ cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@
rm $(obj)spl/u-boot-spl-pad.bin
endif
-endif
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
else
GEN_UBOOT = \
- UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
- sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
- cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__OBJS) \
+ UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
+ sed -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
+ $$UNDEF_LST $(__OBJS) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
endif
$(LDSCRIPT): depend
$(MAKE) -C $(dir $@) $(notdir $@)
-$(obj)u-boot.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates u-boot.lst,
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS)))
+$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend
$(MAKE) -C nand_spl/board/$(BOARDDIR) all
lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
-#========================================================================
-# ARM
-#========================================================================
-
-SX1_stdout_serial_config \
-SX1_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
- echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
- else \
- echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ SX1 arm arm925t sx1
-
#########################################################################
## ARM1176 Systems
#########################################################################
$(obj)board/matrix_vision/*/bootscript.img \
$(obj)board/voiceblue/eeprom \
$(obj)u-boot.lds \
+ $(obj)include/u-boot.lst \
$(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \
$(obj)arch/blackfin/cpu/init.{lds,elf}
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)u-boot.dtb
@rm -f $(obj)u-boot.sb
@rm -f $(obj)u-boot.spr
- @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map}
- @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map}
+ @rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
+ @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
+ @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
+ @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst}
@rm -f $(obj)MLO
@rm -f $(obj)SPL
@rm -f $(obj)tools/xway-swap-bytes
ICache only when Code runs from RAM.
- 85xx CPU Options:
+ CONFIG_SYS_PPC64
+
+ Specifies that the core is a 64-bit PowerPC implementation (implements
+ the "64" category of the Power ISA). This is necessary for ePAPR
+ compliance, among other possible reasons.
+
CONFIG_SYS_FSL_TBCLK_DIV
Defines the core time base clock divider ratio compared to the
additional board info beside
the logo
+ When CONFIG_CFB_CONSOLE_ANSI is defined, console will support
+ a limited number of ANSI escape sequences (cursor control,
+ erase functions and limited graphics rendition control).
+
When CONFIG_CFB_CONSOLE is defined, video console is
default i/o. Serial console can be forced with
environment 'console=serial'.
CONFIG_CMD_EEPROM * EEPROM read/write support
CONFIG_CMD_ELF * bootelf, bootvx
CONFIG_CMD_EXPORTENV * export the environment
+ CONFIG_CMD_EXT2 * ext2 command support
+ CONFIG_CMD_EXT4 * ext4 command support
CONFIG_CMD_SAVEENV saveenv
CONFIG_CMD_FDC * Floppy Disk Support
- CONFIG_CMD_FAT * FAT partition support
+ CONFIG_CMD_FAT * FAT command support
CONFIG_CMD_FDOS * Dos diskette Support
CONFIG_CMD_FLASH flinfo, erase, protect
CONFIG_CMD_FPGA FPGA device initialization support
devices.
CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz)
+ The environment variable 'scsidevs' is set to the number of
+ SCSI devices found during the last scan.
+
- NETWORK Support (PCI):
CONFIG_E1000
Support for Intel 8254x/8257x gigabit chips.
CONFIG_CALXEDA_XGMAC
Support for the Calxeda XGMAC device
- CONFIG_DRIVER_LAN91C96
+ CONFIG_LAN91C96
Support for SMSC's LAN91C96 chips.
CONFIG_LAN91C96_BASE
CONFIG_LAN91C96_USE_32_BIT
Define this to enable 32 bit addressing
- CONFIG_DRIVER_SMC91111
+ CONFIG_SMC91111
Support for SMSC's LAN91C111 chip
CONFIG_SMC91111_BASE
This will also enable the command "fatwrite" enabling the
user to write files to FAT.
+CBFS (Coreboot Filesystem) support
+ CONFIG_CMD_CBFS
+
+ Define this to enable support for reading from a Coreboot
+ filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls
+ and cbfsload.
+
- Keyboard Support:
CONFIG_ISA_KEYBOARD
following board configurations are known to be
"pRAM-clean":
- ETX094, IVMS8, IVML24, SPD8xx, TQM8xxL,
- HERMES, IP860, RPXlite, LWMON, LANTEC,
+ IVMS8, IVML24, SPD8xx, TQM8xxL,
+ HERMES, IP860, RPXlite, LWMON,
FLAGADM, TQM8260
- Error Recovery:
- CONFIG_SYS_VENDOR
- CONFIG_SYS_SOC
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+ Define this in order to add variables describing certain
+ run-time determined information about the hardware to the
+ environment. These will be named board_name, board_rev.
+
- DataFlash Support:
CONFIG_HAS_DATAFLASH
LIB = $(obj)lib$(SOC).o
-COBJS += aemif.o clock.o init.o mux.o timer.o wdt.o
+COBJS += aemif.o clock.o init.o mux.o timer.o
SOBJS += lowlevel_init.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
#define tdm_extra_clk {TDM_PLL, 1}
#define tdm1_clk {TDM_PLL, 2}
-/* Optimization barrier */
-#define barrier() \
- __asm__ __volatile__("mov r0, r0\n" : : : "memory");
-
static const struct lpsc_map lpsc_clk_map[] = {
[TNETV107X_LPSC_ARM] = sys_arm1176_clk,
[TNETV107X_LPSC_GEM] = sys_dsp_clk,
*/
/*
- * CPU specific code
+ * cleanup_before_linux() - Prepare the CPU to jump to Linux
+ *
+ * This function is called just before we call Linux, it
+ * prepares the processor for linux
*/
-
-#include <common.h>
-#include <command.h>
-#include <clps7111.h>
-#include <asm/hardware.h>
-#include <asm/system.h>
-
-int cleanup_before_linux (void)
+int cleanup_before_linux(void)
{
- /*
- * this function is called just before we call linux
- * it prepares the processor for linux
- *
- * we turn off caches etc ...
- * and we set the CPU-speed to 73 MHz - see start.S for details
- */
-
-#if defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B) || defined(CONFIG_LPC2292)
- disable_interrupts ();
- /* Nothing more needed */
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
- /* No cleanup before linux for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_TEGRA)
- /* No cleanup before linux for tegra as yet */
-#else
-#error No cleanup_before_linux() defined for this CPU type
-#endif
return 0;
}
*/
#include <common.h>
-#include <clps7111.h>
-#include <asm/proc-armv/ptrace.h>
-#include <asm/hardware.h>
-
-#ifndef CONFIG_NETARM
-/* we always count down the max. */
-#define TIMER_LOAD_VAL 0xffff
-/* macro to read the 16 bit timer */
-#define READ_TIMER (IO_TC1D & 0xffff)
-
-#ifdef CONFIG_LPC2292
-#undef READ_TIMER
-#define READ_TIMER (0xFFFFFFFF - GET32(T0TC))
-#endif
-
-#else
-#define IRQEN (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_INTR_ENABLE))
-#define TM2CTRL (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL))
-#define TM2STAT (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_STATUS))
-#define TIMER_LOAD_VAL NETARM_GEN_TSTAT_CTC_MASK
-#define READ_TIMER (TM2STAT & NETARM_GEN_TSTAT_CTC_MASK)
-#endif
-
-#ifdef CONFIG_S3C4510B
-/* require interrupts for the S3C4510B */
-# ifndef CONFIG_USE_IRQ
-# error CONFIG_USE_IRQ _must_ be defined when using CONFIG_S3C4510B
-# else
-static struct _irq_handler IRQ_HANDLER[N_IRQS];
-# endif
-#endif /* CONFIG_S3C4510B */
#ifdef CONFIG_USE_IRQ
void do_irq (struct pt_regs *pt_regs)
{
-#if defined(CONFIG_S3C4510B)
- unsigned int pending;
-
- while ( (pending = GET_REG( REG_INTOFFSET)) != 0x54) { /* sentinal value for no pending interrutps */
- IRQ_HANDLER[pending>>2].m_func( IRQ_HANDLER[pending>>2].m_data);
-
- /* clear pending interrupt */
- PUT_REG( REG_INTPEND, (1<<(pending>>2)));
- }
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
- /* No do_irq() for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_LPC2292)
-
- void (*pfnct)(void);
-
- pfnct = (void (*)(void))VICVectAddr;
-
- (*pfnct)();
-#else
-#error do_irq() not defined for this CPU type
-#endif
-}
-#endif
-
-#ifdef CONFIG_S3C4510B
-static void default_isr( void *data) {
- printf ("default_isr(): called for IRQ %d\n", (int)data);
-}
-
-static void timer_isr( void *data) {
- unsigned int *pTime = (unsigned int *)data;
-
- (*pTime)++;
- if ( !(*pTime % (CONFIG_SYS_HZ/4))) {
- /* toggle LED 0 */
- PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1);
- }
-
}
#endif
-#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
- /* Use IntegratorAP routines in board/integratorap.c */
-#else
-
+#if defined(CONFIG_TEGRA)
static ulong timestamp;
static ulong lastdec;
-#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C4510B)
-int arch_interrupt_init (void)
-{
- int i;
-
- /* install default interrupt handlers */
- for ( i = 0; i < N_IRQS; i++) {
- IRQ_HANDLER[i].m_data = (void *)i;
- IRQ_HANDLER[i].m_func = default_isr;
- }
-
- /* configure interrupts for IRQ mode */
- PUT_REG( REG_INTMODE, 0x0);
- /* clear any pending interrupts */
- PUT_REG( REG_INTPEND, 0x1FFFFF);
-
- lastdec = 0;
-
- /* install interrupt handler for timer */
- IRQ_HANDLER[INT_TIMER0].m_data = (void *)×tamp;
- IRQ_HANDLER[INT_TIMER0].m_func = timer_isr;
-
- return 0;
-}
-#endif
-
int timer_init (void)
{
-#if defined(CONFIG_NETARM)
- /* disable all interrupts */
- IRQEN = 0;
-
- /* operate timer 2 in non-prescale mode */
- TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CONFIG_SYS_HZ) |
- NETARM_GEN_TCTL_ENABLE |
- NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL));
-
- /* set timer 2 counter */
- lastdec = TIMER_LOAD_VAL;
-#elif defined(CONFIG_S3C4510B)
- /* configure free running timer 0 */
- PUT_REG( REG_TMOD, 0x0);
- /* Stop timer 0 */
- CLR_REG( REG_TMOD, TM0_RUN);
-
- /* Configure for interval mode */
- CLR_REG( REG_TMOD, TM1_TOGGLE);
-
- /*
- * Load Timer data register with count down value.
- * count_down_val = CONFIG_SYS_SYS_CLK_FREQ/CONFIG_SYS_HZ
- */
- PUT_REG( REG_TDATA0, (CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ));
-
- /*
- * Enable global interrupt
- * Enable timer0 interrupt
- */
- CLR_REG( REG_INTMASK, ((1<<INT_GLOBAL) | (1<<INT_TIMER0)));
-
- /* Start timer */
- SET_REG( REG_TMOD, TM0_RUN);
-#elif defined(CONFIG_LPC2292)
- PUT32(T0IR, 0); /* disable all timer0 interrupts */
- PUT32(T0TCR, 0); /* disable timer0 */
- PUT32(T0PR, CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ);
- PUT32(T0MCR, 0);
- PUT32(T0TC, 0);
- PUT32(T0TCR, 1); /* enable timer0 */
-
-#elif defined(CONFIG_TEGRA)
/* No timer routines for tegra as yet */
lastdec = 0;
-#else
-#error No timer_init() defined for this CPU type
-#endif
timestamp = 0;
- return (0);
-}
-
-#endif /* ! IntegratorAP */
-
-/*
- * timer without interrupts
- */
-
-
-#if defined(CONFIG_NETARM) || defined(CONFIG_LPC2292)
-
-ulong get_timer (ulong base)
-{
- return get_timer_masked () - base;
-}
-
-void __udelay (unsigned long usec)
-{
- ulong tmo;
-
- tmo = usec / 1000;
- tmo *= CONFIG_SYS_HZ;
- tmo /= 1000;
-
- tmo += get_timer (0);
-
- while (get_timer_masked () < tmo)
-#ifdef CONFIG_LPC2292
- /* GJ - not sure whether this is really needed or a misunderstanding */
- __asm__ __volatile__(" nop");
-#else
- /*NOP*/;
-#endif
-}
-
-ulong get_timer_masked (void)
-{
- ulong now = READ_TIMER;
-
- if (lastdec >= now) {
- /* normal mode */
- timestamp += lastdec - now;
- } else {
- /* we have an overflow ... */
- timestamp += lastdec + TIMER_LOAD_VAL - now;
- }
- lastdec = now;
-
- return timestamp;
-}
-
-void udelay_masked (unsigned long usec)
-{
- ulong tmo;
- ulong endtime;
- signed long diff;
-
- if (usec >= 1000) {
- tmo = usec / 1000;
- tmo *= CONFIG_SYS_HZ;
- tmo /= 1000;
- } else {
- tmo = usec * CONFIG_SYS_HZ;
- tmo /= (1000*1000);
- }
-
- endtime = get_timer_masked () + tmo;
-
- do {
- ulong now = get_timer_masked ();
- diff = endtime - now;
- } while (diff >= 0);
-}
-
-#elif defined(CONFIG_S3C4510B)
-
-ulong get_timer (ulong base)
-{
- return timestamp - base;
-}
-
-void __udelay (unsigned long usec)
-{
- u32 ticks;
-
- ticks = (usec * CONFIG_SYS_HZ) / 1000000;
-
- ticks += get_timer (0);
-
- while (get_timer (0) < ticks)
- /*NOP*/;
-
+ return 0;
}
-
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
- /* No timer routines for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_TEGRA)
- /* No timer routines for tegra as yet */
-#else
-#error Timer routines not defined for this CPU type
#endif
+++ /dev/null
-#
-# (C) Copyright 2000-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(SOC).o
-
-COBJS = flash.o mmc.o mmc_hw.o spi.o
-SOBJS = $(obj)iap_entry.o
-
-SRCS := $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-
-all: $(obj).depend $(LIB)
-
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-# this MUST be compiled as thumb code!
-$(SOBJS):
- $(CC) $(AFLAGS) -march=armv4t -c -o $(SOBJS) iap_entry.S
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
- *
- * Modified to remove all but the IAP-command related code by
- * Gary Jennejohn <garyj@denx.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-/* IAP commands use 32 bytes at the top of CPU internal sram, we
- use 512 bytes below that */
-#define COPY_BUFFER_LOCATION 0x40003de0
-
-#define IAP_LOCATION 0x7ffffff1
-#define IAP_CMD_PREPARE 50
-#define IAP_CMD_COPY 51
-#define IAP_CMD_ERASE 52
-#define IAP_CMD_CHECK 53
-#define IAP_CMD_ID 54
-#define IAP_CMD_VERSION 55
-#define IAP_CMD_COMPARE 56
-
-#define IAP_RET_CMD_SUCCESS 0
-
-static unsigned long command[5];
-static unsigned long result[2];
-
-extern void iap_entry(unsigned long * command, unsigned long * result);
-
-/*-----------------------------------------------------------------------
- *
- */
-static int get_flash_sector(flash_info_t * info, ulong flash_addr)
-{
- int i;
-
- for(i = 1; i < (info->sector_count); i++) {
- if (flash_addr < (info->start[i]))
- break;
- }
-
- return (i-1);
-}
-
-/*-----------------------------------------------------------------------
- * This function assumes that flash_addr is aligned on 512 bytes boundary
- * in flash. This function also assumes that prepare have been called
- * for the sector in question.
- */
-int lpc2292_copy_buffer_to_flash(flash_info_t * info, ulong flash_addr)
-{
- int first_sector;
- int last_sector;
-
- first_sector = get_flash_sector(info, flash_addr);
- last_sector = get_flash_sector(info, flash_addr + 512 - 1);
-
- /* prepare sectors for write */
- command[0] = IAP_CMD_PREPARE;
- command[1] = first_sector;
- command[2] = last_sector;
- iap_entry(command, result);
- if (result[0] != IAP_RET_CMD_SUCCESS) {
- printf("IAP prepare failed\n");
- return ERR_PROG_ERROR;
- }
-
- command[0] = IAP_CMD_COPY;
- command[1] = flash_addr;
- command[2] = COPY_BUFFER_LOCATION;
- command[3] = 512;
- command[4] = CONFIG_SYS_SYS_CLK_FREQ >> 10;
- iap_entry(command, result);
- if (result[0] != IAP_RET_CMD_SUCCESS) {
- printf("IAP copy failed\n");
- return 1;
- }
-
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int lpc2292_flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag;
- int prot;
- int sect;
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
-
- flag = disable_interrupts();
-
- printf ("Erasing %d sectors starting at sector %2d.\n"
- "This make take some time ... ",
- s_last - s_first + 1, s_first);
-
- command[0] = IAP_CMD_PREPARE;
- command[1] = s_first;
- command[2] = s_last;
- iap_entry(command, result);
- if (result[0] != IAP_RET_CMD_SUCCESS) {
- printf("IAP prepare failed\n");
- return ERR_PROTECTED;
- }
-
- command[0] = IAP_CMD_ERASE;
- command[1] = s_first;
- command[2] = s_last;
- command[3] = CONFIG_SYS_SYS_CLK_FREQ >> 10;
- iap_entry(command, result);
- if (result[0] != IAP_RET_CMD_SUCCESS) {
- printf("IAP erase failed\n");
- return ERR_PROTECTED;
- }
-
- if (flag)
- enable_interrupts();
-
- return ERR_OK;
-}
-
-int lpc2292_write_buff (flash_info_t * info, uchar * src, ulong addr,
- ulong cnt)
-{
- int first_copy_size;
- int last_copy_size;
- int first_block;
- int last_block;
- int nbr_mid_blocks;
- uchar memmap_value;
- ulong i;
- uchar* src_org;
- uchar* dst_org;
- int ret = ERR_OK;
-
- src_org = src;
- dst_org = (uchar*)addr;
-
- first_block = addr / 512;
- last_block = (addr + cnt) / 512;
- nbr_mid_blocks = last_block - first_block - 1;
-
- first_copy_size = 512 - (addr % 512);
- last_copy_size = (addr + cnt) % 512;
-
- debug("\ncopy first block: (1) %lX -> %lX 0x200 bytes, "
- "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n",
- (ulong)(first_block * 512),
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)src,
- (ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
- first_copy_size,
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)(first_block * 512));
-
- /* copy first block */
- memcpy((void*)COPY_BUFFER_LOCATION,
- (void*)(first_block * 512), 512);
- memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
- src, first_copy_size);
- lpc2292_copy_buffer_to_flash(info, first_block * 512);
- src += first_copy_size;
- addr += first_copy_size;
-
- /* copy middle blocks */
- for (i = 0; i < nbr_mid_blocks; i++) {
- debug("copy middle block: %lX -> %lX 512 bytes, "
- "%lX -> %lX 512 bytes\n",
- (ulong)src,
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)addr);
-
- memcpy((void*)COPY_BUFFER_LOCATION, src, 512);
- lpc2292_copy_buffer_to_flash(info, addr);
- src += 512;
- addr += 512;
- }
-
-
- if (last_copy_size > 0) {
- debug("copy last block: (1) %lX -> %lX 0x200 bytes, "
- "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n",
- (ulong)(last_block * 512),
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)src,
- (ulong)(COPY_BUFFER_LOCATION),
- last_copy_size,
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)addr);
-
- /* copy last block */
- memcpy((void*)COPY_BUFFER_LOCATION,
- (void*)(last_block * 512), 512);
- memcpy((void*)COPY_BUFFER_LOCATION,
- src, last_copy_size);
- lpc2292_copy_buffer_to_flash(info, addr);
- }
-
- /* verify write */
- memmap_value = GET8(MEMMAP);
-
- disable_interrupts();
-
- PUT8(MEMMAP, 01); /* we must make sure that initial 64
- bytes are taken from flash when we
- do the compare */
-
- for (i = 0; i < cnt; i++) {
- if (*dst_org != *src_org){
- printf("Write failed. Byte %lX differs\n", i);
- ret = ERR_PROG_ERROR;
- break;
- }
- dst_org++;
- src_org++;
- }
-
- PUT8(MEMMAP, memmap_value);
- enable_interrupts();
-
- return ret;
-}
+++ /dev/null
-IAP_ADDRESS: .word 0x7FFFFFF1
-
-.globl iap_entry
-iap_entry:
- ldr r2, IAP_ADDRESS
- bx r2
- mov pc, lr
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <mmc.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-#include <part.h>
-#include <fat.h>
-#include "mmc_hw.h"
-#include <asm/arch/spi.h>
-
-#ifdef CONFIG_MMC
-
-#undef MMC_DEBUG
-
-static block_dev_desc_t mmc_dev;
-
-/* these are filled out by a call to mmc_hw_get_parameters */
-static int hw_size; /* in kbytes */
-static int hw_nr_sects;
-static int hw_sect_size; /* in bytes */
-
-block_dev_desc_t * mmc_get_dev(int dev)
-{
- return (block_dev_desc_t *)(&mmc_dev);
-}
-
-unsigned long mmc_block_read(int dev,
- unsigned long start,
- lbaint_t blkcnt,
- void *buffer)
-{
- unsigned long rc = 0;
- unsigned char *p = (unsigned char *)buffer;
- unsigned long i;
- unsigned long addr = start;
-
-#ifdef MMC_DEBUG
- printf("mmc_block_read: start=%lu, blkcnt=%lu\n", start,
- (unsigned long)blkcnt);
-#endif
-
- for(i = 0; i < (unsigned long)blkcnt; i++) {
-#ifdef MMC_DEBUG
- printf("mmc_read_sector: addr=%lu, buffer=%p\n", addr, p);
-#endif
- (void)mmc_read_sector(addr, p);
- rc++;
- addr++;
- p += hw_sect_size;
- }
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------------
- * Read hardware paramterers (sector size, size, number of sectors)
- */
-static int mmc_hw_get_parameters(void)
-{
- unsigned char csddata[16];
- unsigned int sizemult;
- unsigned int size;
-
- mmc_read_csd(csddata);
- hw_sect_size = 1<<(csddata[5] & 0x0f);
- size = ((csddata[6]&0x03)<<10)+(csddata[7]<<2)+(csddata[8]&0xc0);
- sizemult = ((csddata[10] & 0x80)>>7)+((csddata[9] & 0x03)<<1);
- hw_nr_sects = (size+1)*(1<<(sizemult+2));
- hw_size = hw_nr_sects*hw_sect_size/1024;
-
-#ifdef MMC_DEBUG
- printf("mmc_hw_get_parameters: hw_sect_size=%d, hw_nr_sects=%d, "
- "hw_size=%d\n", hw_sect_size, hw_nr_sects, hw_size);
-#endif
-
- return 0;
-}
-
-int mmc_legacy_init(int verbose)
-{
- int ret = -ENODEV;
-
- if (verbose)
- printf("mmc_legacy_init\n");
-
- spi_init();
- /* this meeds to be done twice */
- mmc_hw_init();
- udelay(1000);
- mmc_hw_init();
-
- mmc_hw_get_parameters();
-
- mmc_dev.if_type = IF_TYPE_MMC;
- mmc_dev.part_type = PART_TYPE_DOS;
- mmc_dev.dev = 0;
- mmc_dev.lun = 0;
- mmc_dev.type = 0;
- mmc_dev.blksz = hw_sect_size;
- mmc_dev.lba = hw_nr_sects;
- sprintf((char*)mmc_dev.vendor, "Unknown vendor");
- sprintf((char*)mmc_dev.product, "Unknown product");
- sprintf((char*)mmc_dev.revision, "N/A");
- mmc_dev.removable = 0; /* should be true??? */
- mmc_dev.block_read = mmc_block_read;
-
- fat_register_device(&mmc_dev, 1);
-
- ret = 0;
-
- return ret;
-}
-
-#endif /* CONFIG_MMC */
+++ /dev/null
-/*
- This code was original written by Ulrich Radig and modified by
- Embedded Artists AB (www.embeddedartists.com).
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <config.h>
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spi.h>
-
-#define MMC_Enable() PUT32(IO1CLR, 1l << 22)
-#define MMC_Disable() PUT32(IO1SET, 1l << 22)
-#define mmc_spi_cfg() spi_set_clock(8); spi_set_cfg(0, 1, 0);
-
-static unsigned char Write_Command_MMC (unsigned char *CMD);
-static void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer,
- unsigned short int Bytes);
-
-/* initialize the hardware */
-int mmc_hw_init(void)
-{
- unsigned long a;
- unsigned short int Timeout = 0;
- unsigned char b;
- unsigned char CMD[] = {0x40, 0x00, 0x00, 0x00, 0x00, 0x95};
-
- /* set-up GPIO and SPI */
- (*((volatile unsigned long *)PINSEL2)) &= ~(1l << 3); /* clear bit 3 */
- (*((volatile unsigned long *)IO1DIR)) |= (1l << 22); /* set bit 22 (output) */
-
- MMC_Disable();
-
- spi_lock();
- spi_set_clock(248);
- spi_set_cfg(0, 1, 0);
- MMC_Enable();
-
- /* waste some time */
- for(a=0; a < 20000; a++)
- asm("nop");
-
- /* Put the MMC/SD-card into SPI-mode */
- for (b = 0; b < 10; b++) /* Sends min 74+ clocks to the MMC/SD-card */
- spi_write(0xff);
-
- /* Sends command CMD0 to MMC/SD-card */
- while (Write_Command_MMC(CMD) != 1) {
- if (Timeout++ > 200) {
- MMC_Disable();
- spi_unlock();
- return(1); /* Abort with command 1 (return 1) */
- }
- }
- /* Sends Command CMD1 an MMC/SD-card */
- Timeout = 0;
- CMD[0] = 0x41;/* Command 1 */
- CMD[5] = 0xFF;
-
- while (Write_Command_MMC(CMD) != 0) {
- if (Timeout++ > 200) {
- MMC_Disable();
- spi_unlock();
- return (2); /* Abort with command 2 (return 2) */
- }
- }
-
- MMC_Disable();
- spi_unlock();
-
- return 0;
-}
-
-/* ############################################################################
- Sends a command to the MMC/SD-card
- ######################################################################### */
-static unsigned char Write_Command_MMC (unsigned char *CMD)
-{
- unsigned char a, tmp = 0xff;
- unsigned short int Timeout = 0;
-
- MMC_Disable();
- spi_write(0xFF);
- MMC_Enable();
-
- for (a = 0; a < 0x06; a++)
- spi_write(*CMD++);
-
- while (tmp == 0xff) {
- tmp = spi_read();
- if (Timeout++ > 5000)
- break;
- }
-
- return (tmp);
-}
-
-/* ############################################################################
- Routine to read the CID register from the MMC/SD-card (16 bytes)
- ######################################################################### */
-void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, unsigned short
- int Bytes)
-{
- unsigned short int a;
-
- spi_lock();
- mmc_spi_cfg();
- MMC_Enable();
-
- if (Write_Command_MMC(CMD) != 0) {
- MMC_Disable();
- spi_unlock();
- return;
- }
-
- while (spi_read() != 0xfe) {};
- for (a = 0; a < Bytes; a++)
- *Buffer++ = spi_read();
-
- /* Read the CRC-byte */
- spi_read(); /* CRC - byte is discarded */
- spi_read(); /* CRC - byte is discarded */
- /* set MMC_Chip_Select to high (MMC/SD-card Inaktiv) */
- MMC_Disable();
- spi_unlock();
-
- return;
-}
-
-/* ############################################################################
- Routine to read a block (512 bytes) from the MMC/SD-card
- ######################################################################### */
-unsigned char mmc_read_sector (unsigned long addr,unsigned char *Buffer)
-{
- /* Command 16 to read aBlocks from the MMC/SD - caed */
- unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF};
-
- /* The address on the MMC/SD-card is in bytes,
- addr is transformed from blocks to bytes and the result is
- placed into the command */
-
- addr = addr << 9; /* addr = addr * 512 */
-
- CMD[1] = ((addr & 0xFF000000) >> 24);
- CMD[2] = ((addr & 0x00FF0000) >> 16);
- CMD[3] = ((addr & 0x0000FF00) >> 8 );
-
- MMC_Read_Block(CMD, Buffer, 512);
-
- return (0);
-}
-
-/* ############################################################################
- Routine to write a block (512 byte) to the MMC/SD-card
- ######################################################################### */
-unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer)
-{
- unsigned char tmp, a;
- unsigned short int b;
- /* Command 24 to write a block to the MMC/SD - card */
- unsigned char CMD[] = {0x58, 0x00, 0x00, 0x00, 0x00, 0xFF};
-
- /* The address on the MMC/SD-card is in bytes,
- addr is transformed from blocks to bytes and the result is
- placed into the command */
-
- addr = addr << 9; /* addr = addr * 512 */
-
- CMD[1] = ((addr & 0xFF000000) >> 24);
- CMD[2] = ((addr & 0x00FF0000) >> 16);
- CMD[3] = ((addr & 0x0000FF00) >> 8 );
-
- spi_lock();
- mmc_spi_cfg();
- MMC_Enable();
-
- /* Send command CMD24 to the MMC/SD-card (Write 1 Block/512 Bytes) */
- tmp = Write_Command_MMC(CMD);
- if (tmp != 0) {
- MMC_Disable();
- spi_unlock();
- return(tmp);
- }
-
- /* Do a short delay and send a clock-pulse to the MMC/SD-card */
- for (a = 0; a < 100; a++)
- spi_read();
-
- /* Send a start byte to the MMC/SD-card */
- spi_write(0xFE);
-
- /* Write the block (512 bytes) to the MMC/SD-card */
- for (b = 0; b < 512; b++)
- spi_write(*Buffer++);
-
- /* write the CRC-Byte */
- spi_write(0xFF); /* write a dummy CRC */
- spi_write(0xFF); /* CRC code is not used */
-
- /* Wait for MMC/SD-card busy */
- while (spi_read() != 0xff) {};
-
- /* set MMC_Chip_Select to high (MMC/SD-card inactive) */
- MMC_Disable();
- spi_unlock();
- return (0);
-}
-
-/* #########################################################################
- Routine to read the CSD register from the MMC/SD-card (16 bytes)
- ######################################################################### */
-unsigned char mmc_read_csd (unsigned char *Buffer)
-{
- /* Command to read the CSD register */
- unsigned char CMD[] = {0x49, 0x00, 0x00, 0x00, 0x00, 0xFF};
-
- MMC_Read_Block(CMD, Buffer, 16);
-
- return (0);
-}
+++ /dev/null
-/*
- This module implements a linux character device driver for the 24c256 chip.
- Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#ifndef _MMC_HW_
-#define _MMC_HW_
-
-unsigned char mmc_read_csd(unsigned char *Buffer);
-unsigned char mmc_read_sector (unsigned long addr,
- unsigned char *Buffer);
-unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer);
-int mmc_hw_init(void);
-
-#endif /* _MMC_HW_ */
+++ /dev/null
-/*
- This module implements an interface to the SPI on the lpc22xx.
- Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <config.h>
-#include <common.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spi.h>
-
-unsigned long spi_flags;
-unsigned char spi_idle = 0x00;
-
-int spi_init(void)
-{
- unsigned long pinsel0_value;
-
- /* activate spi pins */
- pinsel0_value = GET32(PINSEL0);
- pinsel0_value &= ~(0xFFl << 8);
- pinsel0_value |= (0x55l << 8);
- PUT32(PINSEL0, pinsel0_value);
-
- return 0;
-}
+++ /dev/null
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(SOC).o
-
-COBJS-y += cache.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
-
-all: $(obj).depend $(LIB)
-
-$(LIB): $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/hardware.h>
-
-void icache_enable (void)
-{
- s32 i;
-
- /* disable all cache bits */
- CLR_REG( REG_SYSCFG, 0x3F);
-
- /* 8KB cache, write enable */
- SET_REG( REG_SYSCFG, CACHE_WRITE_BUFF | CACHE_MODE_01);
-
- /* clear TAG RAM bits */
- for ( i = 0; i < 256; i++)
- PUT_REG( CACHE_TAG_RAM + 4*i, 0x00000000);
-
- /* clear SET0 RAM */
- for(i=0; i < 1024; i++)
- PUT_REG( CACHE_SET0_RAM + 4*i, 0x00000000);
-
- /* clear SET1 RAM */
- for(i=0; i < 1024; i++)
- PUT_REG( CACHE_SET1_RAM + 4*i, 0x00000000);
-
- /* enable cache */
- SET_REG( REG_SYSCFG, CACHE_ENABLE);
-
-}
-
-void icache_disable (void)
-{
- /* disable all cache bits */
- CLR_REG( REG_SYSCFG, 0x3F);
-}
-
-int icache_status (void)
-{
- return GET_REG( REG_SYSCFG) & CACHE_ENABLE;
-}
-
-void dcache_enable (void)
-{
- /* we don't have seperate instruction/data caches */
- icache_enable();
-}
-
-void dcache_disable (void)
-{
- /* we don't have seperate instruction/data caches */
- icache_disable();
-}
-
-int dcache_status (void)
-{
- /* we don't have seperate instruction/data caches */
- return icache_status();
-}
ldr pc, _software_interrupt
ldr pc, _prefetch_abort
ldr pc, _data_abort
-#ifdef CONFIG_LPC2292
- .word 0xB4405F76 /* 2's complement of the checksum of the vectors */
-#else
ldr pc, _not_used
-#endif
ldr pc, _irq
ldr pc, _fiq
bl cpu_init_crit
#endif
-#ifdef CONFIG_LPC2292
- bl lowlevel_init
-#endif
-
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
*************************************************************************
*/
-#if defined(CONFIG_LPC2292)
-PLLCFG_ADR: .word PLLCFG
-PLLFEED_ADR: .word PLLFEED
-PLLCON_ADR: .word PLLCON
-PLLSTAT_ADR: .word PLLSTAT
-VPBDIV_ADR: .word VPBDIV
-MEMMAP_ADR: .word MEMMAP
-
-#endif
-
cpu_init_crit:
-#if defined(CONFIG_NETARM)
- /*
- * prior to software reset : need to set pin PORTC4 to be *HRESET
- */
- ldr r0, =NETARM_GEN_MODULE_BASE
- ldr r1, =(NETARM_GEN_PORT_MODE(0x10) | \
- NETARM_GEN_PORT_DIR(0x10))
- str r1, [r0, #+NETARM_GEN_PORTC]
- /*
- * software reset : see HW Ref. Guide 8.2.4 : Software Service register
- * for an explanation of this process
- */
- ldr r0, =NETARM_GEN_MODULE_BASE
- ldr r1, =NETARM_GEN_SW_SVC_RESETA
- str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
- ldr r1, =NETARM_GEN_SW_SVC_RESETB
- str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
- ldr r1, =NETARM_GEN_SW_SVC_RESETA
- str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
- ldr r1, =NETARM_GEN_SW_SVC_RESETB
- str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
- /*
- * setup PLL and System Config
- */
- ldr r0, =NETARM_GEN_MODULE_BASE
-
- ldr r1, =( NETARM_GEN_SYS_CFG_LENDIAN | \
- NETARM_GEN_SYS_CFG_BUSFULL | \
- NETARM_GEN_SYS_CFG_USER_EN | \
- NETARM_GEN_SYS_CFG_ALIGN_ABORT | \
- NETARM_GEN_SYS_CFG_BUSARB_INT | \
- NETARM_GEN_SYS_CFG_BUSMON_EN )
-
- str r1, [r0, #+NETARM_GEN_SYSTEM_CONTROL]
-
-#ifndef CONFIG_NETARM_PLL_BYPASS
- ldr r1, =( NETARM_GEN_PLL_CTL_PLLCNT(NETARM_PLL_COUNT_VAL) | \
- NETARM_GEN_PLL_CTL_POLTST_DEF | \
- NETARM_GEN_PLL_CTL_INDIV(1) | \
- NETARM_GEN_PLL_CTL_ICP_DEF | \
- NETARM_GEN_PLL_CTL_OUTDIV(2) )
- str r1, [r0, #+NETARM_GEN_PLL_CONTROL]
-#endif
-
- /*
- * mask all IRQs by clearing all bits in the INTMRs
- */
- mov r1, #0
- ldr r0, =NETARM_GEN_MODULE_BASE
- str r1, [r0, #+NETARM_GEN_INTR_ENABLE]
-
-#elif defined(CONFIG_S3C4510B)
- /*
- * Mask off all IRQ sources
- */
- ldr r1, =REG_INTMASK
- ldr r0, =0x3FFFFF
- str r0, [r1]
-
- /*
- * Disable Cache
- */
- ldr r0, =REG_SYSCFG
- ldr r1, =0x83ffffa0 /* cache-disabled */
- str r1, [r0]
-
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
- /* No specific initialisation for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_LPC2292)
- /* Set-up PLL */
- mov r3, #0xAA
- mov r4, #0x55
- /* First disconnect and disable the PLL */
- ldr r0, PLLCON_ADR
- mov r1, #0x00
- str r1, [r0]
- ldr r0, PLLFEED_ADR /* start feed sequence */
- str r3, [r0]
- str r4, [r0] /* feed sequence done */
- /* Set new M and P values */
- ldr r0, PLLCFG_ADR
- mov r1, #0x23 /* M=4 and P=2 */
- str r1, [r0]
- ldr r0, PLLFEED_ADR /* start feed sequence */
- str r3, [r0]
- str r4, [r0] /* feed sequence done */
- /* Then enable the PLL */
- ldr r0, PLLCON_ADR
- mov r1, #0x01 /* PLL enable bit */
- str r1, [r0]
- ldr r0, PLLFEED_ADR /* start feed sequence */
- str r3, [r0]
- str r4, [r0] /* feed sequence done */
- /* Wait for the lock */
- ldr r0, PLLSTAT_ADR
- mov r1, #0x400 /* lock bit */
-lock_loop:
- ldr r2, [r0]
- and r2, r1, r2
- cmp r2, #0
- beq lock_loop
- /* And finally connect the PLL */
- ldr r0, PLLCON_ADR
- mov r1, #0x03 /* PLL enable bit and connect bit */
- str r1, [r0]
- ldr r0, PLLFEED_ADR /* start feed sequence */
- str r3, [r0]
- str r4, [r0] /* feed sequence done */
- /* Set-up VPBDIV register */
- ldr r0, VPBDIV_ADR
- mov r1, #0x01 /* VPB clock is same as process clock */
- str r1, [r0]
-#elif defined(CONFIG_TEGRA)
- /* No cpu_init_crit for tegra as yet */
-#else
-#error No cpu_init_crit() defined for current CPU type
-#endif
-
-#ifdef CONFIG_ARM7_REVD
- /* set clock speed */
- /* !!! we run @ 36 MHz due to a hardware flaw in Rev. D processors */
- /* !!! not doing DRAM refresh properly! */
- ldr r0, SYSCON3
- ldr r1, [r0]
- bic r1, r1, #CLKCTL
- orr r1, r1, #CLKCTL_36
- str r1, [r0]
-#endif
-
-#if !defined(CONFIG_LPC2292) && !defined(CONFIG_TEGRA)
+#if !defined(CONFIG_TEGRA)
mov ip, lr
/*
* before relocating, we have to setup RAM timing
#endif
#endif /* CONFIG_SPL_BUILD */
-
-#if defined(CONFIG_NETARM)
- .align 5
-.globl reset_cpu
-reset_cpu:
- ldr r1, =NETARM_MEM_MODULE_BASE
- ldr r0, [r1, #+NETARM_MEM_CS0_BASE_ADDR]
- ldr r1, =0xFFFFF000
- and r0, r1, r0
- ldr r1, =(relocate-CONFIG_SYS_TEXT_BASE)
- add r0, r1, r0
- ldr r4, =NETARM_GEN_MODULE_BASE
- ldr r1, =NETARM_GEN_SW_SVC_RESETA
- str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
- ldr r1, =NETARM_GEN_SW_SVC_RESETB
- str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
- ldr r1, =NETARM_GEN_SW_SVC_RESETA
- str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
- ldr r1, =NETARM_GEN_SW_SVC_RESETB
- str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
- mov pc, r0
-#elif defined(CONFIG_S3C4510B)
-/* Nothing done here as reseting the CPU is board specific, depending
- * on external peripherals such as watchdog timers, etc. */
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
- /* No specific reset actions for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_LPC2292)
- .align 5
-.globl reset_cpu
-reset_cpu:
- mov pc, r0
-#elif defined(CONFIG_TEGRA)
- /* No specific reset actions for tegra as yet */
-#else
-#error No reset_cpu() defined for current CPU type
-#endif
* MA 02111-1307 USA
*/
#include <common.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-#include <nand.h>
-#include <mmc.h>
-#include <fat.h>
-#include <version.h>
-#include <i2c.h>
-#include <image.h>
-#include <malloc.h>
-#include <linux/compiler.h>
#include "cpu.h"
+#include <spl.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/board.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/pmc.h>
-#include <asm/arch-tegra/scu.h>
-#include <asm/arch-tegra/sys_proto.h>
+#include <asm/arch/spl.h>
-DECLARE_GLOBAL_DATA_PTR;
-/* Define global data structure pointer to it*/
-static gd_t gdata __attribute__ ((section(".data")));
-static bd_t bdata __attribute__ ((section(".data")));
-
-inline void hang(void)
+void spl_board_init(void)
{
- puts("### ERROR ### Please RESET the board ###\n");
- for (;;)
- ;
-}
+ struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+
+ /* enable JTAG */
+ writel(0xC0, &pmt->pmt_cfg_ctl);
-void board_init_f(ulong dummy)
-{
board_init_uart_f();
/* Initialize periph GPIOs */
gpio_early_init_uart();
- /*
- * We call relocate_code() with relocation target same as the
- * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting
- * skipped. Instead, only .bss initialization will happen. That's
- * all we need
- */
- debug(">>board_init_f()\n");
- relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE);
+ clock_early_init();
+ preloader_console_init();
}
-/* This requires UART clocks to be enabled */
-static void preloader_console_init(void)
+u32 spl_boot_device(void)
{
- const char *u_boot_rev = U_BOOT_VERSION;
-
- gd = &gdata;
- gd->bd = &bdata;
- gd->flags |= GD_FLG_RELOC;
- gd->baudrate = CONFIG_BAUDRATE;
-
- serial_init(); /* serial communications setup */
-
- gd->have_console = 1;
-
- /* Avoid a second "U-Boot" coming from this string */
- u_boot_rev = &u_boot_rev[7];
-
- printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE,
- U_BOOT_TIME);
+ return BOOT_DEVICE_RAM;
}
-void board_init_r(gd_t *id, ulong dummy)
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
- struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
-
- /* enable JTAG */
- writel(0xC0, &pmt->pmt_cfg_ctl);
-
- debug(">>spl:board_init_r()\n");
-
- mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
- CONFIG_SYS_SPL_MALLOC_SIZE);
-
-#ifdef CONFIG_SPL_BOARD_INIT
- spl_board_init();
-#endif
+ debug("image entry point: 0x%X\n", spl_image->entry_point);
- clock_early_init();
- serial_init();
- preloader_console_init();
-
- start_cpu((u32)CONFIG_SYS_TEXT_BASE);
+ start_cpu((u32)spl_image->entry_point);
halt_avp();
- /* not reached */
-}
-
-int board_usb_init(const void *blob)
-{
- return 0;
}
.got : { *(.got) }
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = ALIGN(4);
__bss_start = .;
* enable UART for early debug trace
*/
ldr r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR)
- mov r2, #0xd9
- str r2, [r1] /* 115200 baud */
+ mov r2, #((25000000+CONFIG_BAUDRATE/2) / CONFIG_BAUDRATE)
+ str r2, [r1]
ldr r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL)
- mov r2, #0x03
+ mov r2, #KS8695_UART_LINEC_WLEN8
str r2, [r1] /* 8 data bits, no parity, 1 stop */
ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
mov r2, #0x41
COBJS-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
COBJS-y += speed.o
COBJS-y += timer.o
-COBJS-y += usb.o
-COBJS-y += usb_ohci.o
-
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+++ /dev/null
-/*
- * (C) Copyright 2006
- * DENX Software Engineering <mk@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_USB_OHCI_NEW) && \
- defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
- defined(CONFIG_S3C24X0)
-
-#include <asm/arch/s3c24x0_cpu.h>
-#include <asm/io.h>
-
-int usb_cpu_init(void)
-{
- struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
- struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
-
- /*
- * Set the 48 MHz UPLL clocking. Values are taken from
- * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
- */
- writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon);
- /* 1 = use pads related USB for USB host */
- writel(readl(&gpio->misccr) | 0x8, &gpio->misccr);
-
- /*
- * Enable USB host clock.
- */
- writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
-
- return 0;
-}
-
-int usb_cpu_stop(void)
-{
- struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
- /* may not want to do this */
- writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
- return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
- struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
- writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
- return 0;
-}
-
-#endif /* defined(CONFIG_USB_OHCI_NEW) && \
- defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
- defined(CONFIG_S3C24X0) */
writel(1 << ATMEL_ID_USART2, &pmc->pcer);
}
+void at91_mci_hw_init(void)
+{
+ /* Initialize the MCI0 */
+ at91_set_a_periph(AT91_PIO_PORTA, 17, 1); /* MCCK */
+ at91_set_a_periph(AT91_PIO_PORTA, 16, 1); /* MCCDA */
+ at91_set_a_periph(AT91_PIO_PORTA, 15, 1); /* MCDA0 */
+ at91_set_a_periph(AT91_PIO_PORTA, 18, 1); /* MCDA1 */
+ at91_set_a_periph(AT91_PIO_PORTA, 19, 1); /* MCDA2 */
+ at91_set_a_periph(AT91_PIO_PORTA, 20, 1); /* MCDA3 */
+
+ /* Enable clock for MCI0 */
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer);
+}
+
#ifdef CONFIG_ATMEL_SPI
void at91_spi0_hw_init(unsigned long cs_mask)
{
}
. = ALIGN(4);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = ALIGN(4);
}
. = ALIGN(4);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = ALIGN(4);
COBJS += ddr.o
COBJS += emif4.o
COBJS += board.o
+COBJS += mux.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS))
DECLARE_GLOBAL_DATA_PTR;
-struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
-struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
-
static const struct gpio_bank gpio_bank_am33xx[4] = {
{ (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
{ (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
-/* MII mode defines */
-#define MII_MODE_ENABLE 0x0
-#define RGMII_MODE_ENABLE 0xA
-
-/* GPIO that controls power to DDR on EVM-SK */
-#define GPIO_DDR_VTT_EN 7
-
-static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-static struct am335x_baseboard_id __attribute__((section (".data"))) header;
-
-static inline int board_is_bone(void)
-{
- return !strncmp(header.name, "A335BONE", HDR_NAME_LEN);
-}
-
-static inline int board_is_evm_sk(void)
-{
- return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
-}
-
-/*
- * Read header information from EEPROM into global structure.
- */
-static int read_eeprom(void)
-{
- /* Check if baseboard eeprom is available */
- if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
- puts("Could not probe the EEPROM; something fundamentally "
- "wrong on the I2C bus.\n");
- return -ENODEV;
- }
-
- /* read the eeprom using i2c */
- if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header,
- sizeof(header))) {
- puts("Could not read the EEPROM; something fundamentally"
- " wrong on the I2C bus.\n");
- return -EIO;
- }
-
- if (header.magic != 0xEE3355AA) {
- /*
- * read the eeprom using i2c again,
- * but use only a 1 byte address
- */
- if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1,
- (uchar *)&header, sizeof(header))) {
- puts("Could not read the EEPROM; something "
- "fundamentally wrong on the I2C bus.\n");
- return -EIO;
- }
-
- if (header.magic != 0xEE3355AA) {
- printf("Incorrect magic number (0x%x) in EEPROM\n",
- header.magic);
- return -EINVAL;
- }
- }
-
- return 0;
-}
-
-/* UART Defines */
-#ifdef CONFIG_SPL_BUILD
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
-#endif
-
-/*
- * Determine what type of DDR we have.
- */
-static short inline board_memory_type(void)
-{
- /* The following boards are known to use DDR3. */
- if (board_is_evm_sk())
- return EMIF_REG_SDRAM_TYPE_DDR3;
-
- return EMIF_REG_SDRAM_TYPE_DDR2;
-}
-
-/*
- * early system init of muxing and clocks.
- */
-void s_init(void)
-{
- /* WDT1 is already running when the bootloader gets control
- * Disable it to avoid "random" resets
- */
- writel(0xAAAA, &wdtimer->wdtwspr);
- while (readl(&wdtimer->wdtwwps) != 0x0)
- ;
- writel(0x5555, &wdtimer->wdtwspr);
- while (readl(&wdtimer->wdtwwps) != 0x0)
- ;
-
-#ifdef CONFIG_SPL_BUILD
- /* Setup the PLLs and the clocks for the peripherals */
- pll_init();
-
- /* UART softreset */
- u32 regVal;
-
- enable_uart0_pin_mux();
-
- regVal = readl(&uart_base->uartsyscfg);
- regVal |= UART_RESET;
- writel(regVal, &uart_base->uartsyscfg);
- while ((readl(&uart_base->uartsyssts) &
- UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
- ;
-
- /* Disable smart idle */
- regVal = readl(&uart_base->uartsyscfg);
- regVal |= UART_SMART_IDLE_EN;
- writel(regVal, &uart_base->uartsyscfg);
-
- gd = &gdata;
-
- preloader_console_init();
-
- /* Initalize the board header */
- enable_i2c0_pin_mux();
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- if (read_eeprom() < 0)
- puts("Could not get board ID.\n");
-
- enable_board_pin_mux(&header);
- if (board_is_evm_sk()) {
- /*
- * EVM SK 1.2A and later use gpio0_7 to enable DDR3.
- * This is safe enough to do on older revs.
- */
- gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
- gpio_direction_output(GPIO_DDR_VTT_EN, 1);
- }
-
- config_ddr(board_memory_type());
-#endif
-}
-
#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
-int board_mmc_init(bd_t *bis)
+int cpu_mmc_init(bd_t *bis)
{
int ret;
-
+
ret = omap_mmc_init(0, 0, 0);
if (ret)
return ret;
/* Not yet implemented */
return;
}
-
-/*
- * Basic board specific setup. Pinmux has been handled already.
- */
-int board_init(void)
-{
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- if (read_eeprom() < 0)
- puts("Could not get board ID.\n");
-
- gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
-
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-static void cpsw_control(int enabled)
-{
- /* VTP can be added here */
-
- return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
- {
- .slave_reg_ofs = 0x208,
- .sliver_reg_ofs = 0xd80,
- .phy_id = 0,
- },
- {
- .slave_reg_ofs = 0x308,
- .sliver_reg_ofs = 0xdc0,
- .phy_id = 1,
- },
-};
-
-static struct cpsw_platform_data cpsw_data = {
- .mdio_base = AM335X_CPSW_MDIO_BASE,
- .cpsw_base = AM335X_CPSW_BASE,
- .mdio_div = 0xff,
- .channels = 8,
- .cpdma_reg_ofs = 0x800,
- .slaves = 1,
- .slave_data = cpsw_slaves,
- .ale_reg_ofs = 0xd00,
- .ale_entries = 1024,
- .host_port_reg_ofs = 0x108,
- .hw_stats_reg_ofs = 0x900,
- .mac_control = (1 << 5),
- .control = cpsw_control,
- .host_port_num = 0,
- .version = CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
- uint8_t mac_addr[6];
- uint32_t mac_hi, mac_lo;
-
- if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
- debug("<ethaddr> not set. Reading from E-fuse\n");
- /* try reading mac address from efuse */
- mac_lo = readl(&cdev->macid0l);
- mac_hi = readl(&cdev->macid0h);
- mac_addr[0] = mac_hi & 0xFF;
- mac_addr[1] = (mac_hi & 0xFF00) >> 8;
- mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
- mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
- mac_addr[4] = mac_lo & 0xFF;
- mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
- if (is_valid_ether_addr(mac_addr))
- eth_setenv_enetaddr("ethaddr", mac_addr);
- else
- return -1;
- }
-
- if (board_is_bone()) {
- writel(MII_MODE_ENABLE, &cdev->miisel);
- cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
- PHY_INTERFACE_MODE_MII;
- } else {
- writel(RGMII_MODE_ENABLE, &cdev->miisel);
- cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
- PHY_INTERFACE_MODE_RGMII;
- }
-
- return cpsw_register(&cpsw_data);
-}
-#endif
const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL;
+const struct cm_rtc *cmrtc = (struct cm_rtc *)CM_RTC;
static void enable_interface_clocks(void)
{
while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN)
;
+ /* UART1 */
+#ifdef CONFIG_SERIAL2
+ writel(PRCM_MOD_EN, &cmper->uart1clkctrl);
+ while (readl(&cmper->uart1clkctrl) != PRCM_MOD_EN)
+ ;
+#endif /* CONFIG_SERIAL2 */
+
+ /* UART2 */
+#ifdef CONFIG_SERIAL3
+ writel(PRCM_MOD_EN, &cmper->uart2clkctrl);
+ while (readl(&cmper->uart2clkctrl) != PRCM_MOD_EN)
+ ;
+#endif /* CONFIG_SERIAL3 */
+
+ /* UART3 */
+#ifdef CONFIG_SERIAL4
+ writel(PRCM_MOD_EN, &cmper->uart3clkctrl);
+ while (readl(&cmper->uart3clkctrl) != PRCM_MOD_EN)
+ ;
+#endif /* CONFIG_SERIAL4 */
+
+ /* UART4 */
+#ifdef CONFIG_SERIAL5
+ writel(PRCM_MOD_EN, &cmper->uart4clkctrl);
+ while (readl(&cmper->uart4clkctrl) != PRCM_MOD_EN)
+ ;
+#endif /* CONFIG_SERIAL5 */
+
+ /* UART5 */
+#ifdef CONFIG_SERIAL6
+ writel(PRCM_MOD_EN, &cmper->uart5clkctrl);
+ while (readl(&cmper->uart5clkctrl) != PRCM_MOD_EN)
+ ;
+#endif /* CONFIG_SERIAL6 */
+
/* MMC0*/
writel(PRCM_MOD_EN, &cmper->mmc0clkctrl);
while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN)
writel(PRCM_MOD_EN, &cmper->spi0clkctrl);
while (readl(&cmper->spi0clkctrl) != PRCM_MOD_EN)
;
+
+ /* RTC */
+ writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl);
+ while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN)
+ ;
}
static void mpu_pll_config(void)
#
ifdef CONFIG_SPL_BUILD
ALL-y += $(OBJTREE)/MLO
+ALL-$(CONFIG_SPL_SPI_SUPPORT) += $(OBJTREE)/MLO.byteswap
else
ALL-y += $(obj)u-boot.img
endif
static struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR;
static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
-static const struct ddr_data ddr2_data = {
- .datardsratio0 = ((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20)
- |(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)),
- .datawdsratio0 = ((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20)
- |(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)),
- .datawiratio0 = ((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20)
- |(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)),
- .datagiratio0 = ((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20)
- |(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)),
- .datafwsratio0 = ((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20)
- |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)),
- .datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20)
- |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)),
- .datauserank0delay = DDR2_PHY_RANK0_DELAY,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
-};
-
-static const struct cmd_control ddr2_cmd_ctrl_data = {
- .cmd0csratio = DDR2_RATIO,
- .cmd0dldiff = DDR2_DLL_LOCK_DIFF,
- .cmd0iclkout = DDR2_INVERT_CLKOUT,
-
- .cmd1csratio = DDR2_RATIO,
- .cmd1dldiff = DDR2_DLL_LOCK_DIFF,
- .cmd1iclkout = DDR2_INVERT_CLKOUT,
-
- .cmd2csratio = DDR2_RATIO,
- .cmd2dldiff = DDR2_DLL_LOCK_DIFF,
- .cmd2iclkout = DDR2_INVERT_CLKOUT,
-};
-
-static const struct emif_regs ddr2_emif_reg_data = {
- .sdram_config = DDR2_EMIF_SDCFG,
- .ref_ctrl = DDR2_EMIF_SDREF,
- .sdram_tim1 = DDR2_EMIF_TIM1,
- .sdram_tim2 = DDR2_EMIF_TIM2,
- .sdram_tim3 = DDR2_EMIF_TIM3,
- .emif_ddr_phy_ctlr_1 = DDR2_EMIF_READ_LATENCY,
-};
-
-static const struct ddr_data ddr3_data = {
- .datardsratio0 = DDR3_RD_DQS,
- .datawdsratio0 = DDR3_WR_DQS,
- .datafwsratio0 = DDR3_PHY_FIFO_WE,
- .datawrsratio0 = DDR3_PHY_WR_DATA,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
-};
-
-static const struct cmd_control ddr3_cmd_ctrl_data = {
- .cmd0csratio = DDR3_RATIO,
- .cmd0dldiff = DDR3_DLL_LOCK_DIFF,
- .cmd0iclkout = DDR3_INVERT_CLKOUT,
-
- .cmd1csratio = DDR3_RATIO,
- .cmd1dldiff = DDR3_DLL_LOCK_DIFF,
- .cmd1iclkout = DDR3_INVERT_CLKOUT,
-
- .cmd2csratio = DDR3_RATIO,
- .cmd2dldiff = DDR3_DLL_LOCK_DIFF,
- .cmd2iclkout = DDR3_INVERT_CLKOUT,
-};
-
-static struct emif_regs ddr3_emif_reg_data = {
- .sdram_config = DDR3_EMIF_SDCFG,
- .ref_ctrl = DDR3_EMIF_SDREF,
- .sdram_tim1 = DDR3_EMIF_TIM1,
- .sdram_tim2 = DDR3_EMIF_TIM2,
- .sdram_tim3 = DDR3_EMIF_TIM3,
- .zq_config = DDR3_ZQ_CFG,
- .emif_ddr_phy_ctlr_1 = DDR3_EMIF_READ_LATENCY,
-};
-
static void config_vtp(void)
{
writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_ENABLE,
;
}
-void config_ddr(short ddr_type)
+void config_ddr(unsigned int pll, unsigned int ioctrl,
+ const struct ddr_data *data, const struct cmd_control *ctrl,
+ const struct emif_regs *regs)
{
- int ddr_pll, ioctrl_val;
- const struct emif_regs *emif_regs;
- const struct ddr_data *ddr_data;
- const struct cmd_control *cmd_ctrl_data;
-
- if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR2) {
- ddr_pll = 266;
- cmd_ctrl_data = &ddr2_cmd_ctrl_data;
- ddr_data = &ddr2_data;
- ioctrl_val = DDR2_IOCTRL_VALUE;
- emif_regs = &ddr2_emif_reg_data;
- } else if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR3) {
- ddr_pll = 303;
- cmd_ctrl_data = &ddr3_cmd_ctrl_data;
- ddr_data = &ddr3_data;
- ioctrl_val = DDR3_IOCTRL_VALUE;
- emif_regs = &ddr3_emif_reg_data;
- } else {
- puts("Unknown memory type");
- hang();
- }
-
enable_emif_clocks();
- ddr_pll_config(ddr_pll);
+ ddr_pll_config(pll);
config_vtp();
- config_cmd_ctrl(cmd_ctrl_data);
+ config_cmd_ctrl(ctrl);
- config_ddr_data(0, ddr_data);
- config_ddr_data(1, ddr_data);
+ config_ddr_data(0, data);
+ config_ddr_data(1, data);
- config_io_ctrl(ioctrl_val);
+ config_io_ctrl(ioctrl);
/* Set CKE to be controlled by EMIF/DDR PHY */
writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl);
/* Program EMIF instance */
- config_ddr_phy(emif_regs);
- set_sdram_timings(emif_regs);
- config_sdram(emif_regs);
+ config_ddr_phy(regs);
+ set_sdram_timings(regs);
+ config_sdram(regs);
}
#endif
--- /dev/null
+/*
+ * mux.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+/*
+ * Configure the pin mux for the module
+ */
+void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux)
+{
+ int i;
+
+ if (!mod_pin_mux)
+ return;
+
+ for (i = 0; mod_pin_mux[i].reg_offset != -1; i++)
+ MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset);
+}
. = ALIGN(4);
.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
+
. = ALIGN(4);
__image_copy_end = .;
_end = .;
/* Declarations */
extern omap3_sysinfo sysinfo;
static void omap3_setup_aux_cr(void);
+#ifndef CONFIG_SYS_L2CACHE_OFF
static void omap3_invalidate_l2_cache_secure(void);
+#endif
static const struct gpio_bank gpio_bank_34xx[6] = {
{ (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX },
}
}
-static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
-{
- u32 acr;
-
- /* Read ACR */
- asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
- acr &= ~clear_bits;
- acr |= set_bits;
-
- /* Write ACR - affects non-secure banked bits */
- asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
-}
-
static void omap3_setup_aux_cr(void)
{
/* Workaround for Cortex-A8 errata: #454179 #430973
}
#ifndef CONFIG_SYS_L2CACHE_OFF
+static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
+{
+ u32 acr;
+
+ /* Read ACR */
+ asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+ acr &= ~clear_bits;
+ acr |= set_bits;
+
+ /* Write ACR - affects non-secure banked bits */
+ asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
+}
+
/* Invalidate the entire L2 cache from secure mode */
static void omap3_invalidate_l2_cache_secure(void)
{
#include <asm/utils.h>
#include <version.h>
#include <image.h>
-#include <malloc.h>
#include <asm/arch/reset_manager.h>
#include <spl.h>
*/
void spl_board_init(void)
{
- /* init timer for enabling delay function */
- timer_init();
-
/* de-assert reset for peripherals and bridges based on handoff */
reset_deassert_peripherals_handoff();
. = ALIGN(4);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = ALIGN(4);
+++ /dev/null
-/*
- * (C) Copyright 2001-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <lh7a40x.h>
-
-
-/* ------------------------------------------------------------------------- */
-/* NOTE: This describes the proper use of this file.
- *
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
- *
- * get_FCLK(), get_HCLK(), get_PCLK() return the clock of
- * the specified bus in HZ.
- */
-/* ------------------------------------------------------------------------- */
-
-ulong get_PLLCLK (void)
-{
- return CONFIG_SYS_CLK_FREQ;
-}
-
-/* return FCLK frequency */
-ulong get_FCLK (void)
-{
- lh7a40x_csc_t* csc = LH7A40X_CSC_PTR;
- ulong maindiv1, maindiv2, prediv, ps;
-
- /*
- * from userguide 6.1.1.2
- *
- * FCLK = ((MAINDIV1 +2) * (MAINDIV2 +2) * 14.7456MHz) /
- * ((PREDIV+2) * (2^PS))
- */
- maindiv2 = (csc->clkset & CLKSET_MAINDIV2) >> 11;
- maindiv1 = (csc->clkset & CLKSET_MAINDIV1) >> 7;
- prediv = (csc->clkset & CLKSET_PREDIV) >> 2;
- ps = (csc->clkset & CLKSET_PS) >> 16;
-
- return (((maindiv2 + 2) * (maindiv1 + 2) * CONFIG_SYS_CLK_FREQ) /
- ((prediv + 2) * (1 << ps)));
-}
-
-
-/* return HCLK frequency */
-ulong get_HCLK (void)
-{
- lh7a40x_csc_t* csc = LH7A40X_CSC_PTR;
-
- return (get_FCLK () / ((csc->clkset & CLKSET_HCLKDIV) + 1));
-}
-
-/* return PCLK frequency */
-ulong get_PCLK (void)
-{
- lh7a40x_csc_t* csc = LH7A40X_CSC_PTR;
-
- return (get_HCLK () /
- (1 << (((csc->clkset & CLKSET_PCLKDIV) >> 16) + 1)));
-}
+++ /dev/null
-/*
- * armboot - Startup Code for ARM920 CPU-core
- *
- * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
- * Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
- * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <version.h>
-
-/*
- *************************************************************************
- *
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start: b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction: .word undefined_instruction
-_software_interrupt: .word software_interrupt
-_prefetch_abort: .word prefetch_abort
-_data_abort: .word data_abort
-_not_used: .word not_used
-_irq: .word irq
-_fiq: .word fiq
-
- .balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * relocate armboot to ram
- * setup stack
- * jump to second stage
- *
- *************************************************************************
- */
-
-.globl _TEXT_BASE
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
- .word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
- .word __bss_end__ - _start
-
-.globl _end_ofs
-_end_ofs:
- .word _end - _start
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
-
-reset:
- /*
- * set the cpu to SVC32 mode
- */
- mrs r0,cpsr
- bic r0,r0,#0x1f
- orr r0,r0,#0xd3
- msr cpsr,r0
-
-#define pWDTCTL 0x80001400 /* Watchdog Timer control register */
-#define pINTENC 0x8000050C /* Interrupt-Controller enable clear register */
-#define pCLKSET 0x80000420 /* clock divisor register */
-
- /* disable watchdog, set watchdog control register to
- * all zeros (default reset)
- */
- ldr r0, =pWDTCTL
- mov r1, #0x0
- str r1, [r0]
-
- /*
- * mask all IRQs by setting all bits in the INTENC register (default)
- */
- mov r1, #0xffffffff
- ldr r0, =pINTENC
- str r1, [r0]
-
- /* FCLK:HCLK:PCLK = 1:2:2 */
- /* default FCLK is 200 MHz, using 14.7456 MHz fin */
- ldr r0, =pCLKSET
- ldr r1, =0x0004ee39
-@ ldr r1, =0x0005ee39 @ 1: 2: 4
- str r1, [r0]
-
- /*
- * we do sys-critical inits only at reboot,
- * not when booting from ram!
- */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
- bl cpu_init_crit
-#endif
-
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
- bl board_init_f
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- */
- .globl relocate_code
-relocate_code:
- mov r4, r0 /* save addr_sp */
- mov r5, r1 /* save addr of gd */
- mov r6, r2 /* save addr of destination */
-
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
- adr r0, _start
- cmp r0, r6
- moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
- beq clear_bss /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _bss_start_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r1!, {r9-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r6, r0 /* r9 <- relocation offset */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
- mov r2, #0x00000000 /* clear */
-
-clbss_l:cmp r0, r1 /* clear loop... */
- bhs clbss_e /* if reached end of bss, exit */
- str r2, [r0]
- add r0, r0, #4
- b clbss_l
-clbss_e:
-#endif
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- ldr r0, _board_init_r_ofs
- adr r1, _start
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
- mov pc, lr
-
-_board_init_r_ofs:
- .word board_init_r - _start
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-
-
-cpu_init_crit:
- /*
- * flush v4 I/D caches
- */
- mov r0, #0
- mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
- mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
-
- /*
- * disable MMU stuff and caches
- */
- mrc p15, 0, r0, c1, c0, 0
- bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
- bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
- orr r0, r0, #0x00000002 @ set bit 2 (A) Align
- orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
- orr r0, r0, #0x40000000 @ set bit 30 (nF) notFastBus
- mcr p15, 0, r0, c1, c0, 0
-
-
- /*
- * before relocating, we have to setup RAM timing
- * because memory timing is board-dependend, you will
- * find a lowlevel_init.S in your board directory.
- */
- mov ip, lr
- bl lowlevel_init
- mov lr, ip
-
- mov pc, lr
-
-
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- ldr r2, IRQ_STACK_START_IN
- ldmia r2, {r2 - r3} @ get pc, cpsr
- add r0, sp, #S_FRAME_SIZE @ restore sp_SVC
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- str lr, [r13] @ save caller lr / spsr
- mrs lr, spsr
- str lr, [r13, #4]
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13
- mov lr, pc
- movs pc, lr
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
-
- .align 5
-.globl reset_cpu
-reset_cpu:
- bl disable_interrupts
-
- /* Disable watchdog */
- ldr r1, =pWDTCTL
- mov r3, #0
- str r3, [r1]
-
- /* reset counter */
- ldr r3, =0x00001984
- str r3, [r1, #4]
-
- /* Enable the watchdog */
- mov r3, #1
- str r3, [r1]
-
-_loop_forever:
- b _loop_forever
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <lh7a40x.h>
-
-static ulong timer_load_val = 0;
-
-/* macro to read the 16 bit timer */
-static inline ulong READ_TIMER(void)
-{
- lh7a40x_timers_t* timers = LH7A40X_TIMERS_PTR;
- lh7a40x_timer_t* timer = &timers->timer1;
-
- return (timer->value & 0x0000ffff);
-}
-
-static ulong timestamp;
-static ulong lastdec;
-
-int timer_init (void)
-{
- lh7a40x_timers_t* timers = LH7A40X_TIMERS_PTR;
- lh7a40x_timer_t* timer = &timers->timer1;
-
- /* a periodic timer using the 508kHz source */
- timer->control = (TIMER_PER | TIMER_CLK508K);
-
- if (timer_load_val == 0) {
- /*
- * 10ms period with 508.469kHz clock = 5084
- */
- timer_load_val = CONFIG_SYS_HZ/100;
- }
-
- /* load value for 10 ms timeout */
- lastdec = timer->load = timer_load_val;
-
- /* auto load, start timer */
- timer->control = timer->control | TIMER_EN;
- timestamp = 0;
-
- return (0);
-}
-
-/*
- * timer without interrupts
- */
-ulong get_timer (ulong base)
-{
- return (get_timer_masked() - base);
-}
-
-void __udelay (unsigned long usec)
-{
- ulong tmo,tmp;
-
- /* normalize */
- if (usec >= 1000) {
- tmo = usec / 1000;
- tmo *= CONFIG_SYS_HZ;
- tmo /= 1000;
- }
- else {
- if (usec > 1) {
- tmo = usec * CONFIG_SYS_HZ;
- tmo /= (1000*1000);
- }
- else
- tmo = 1;
- }
-
- /* check for rollover during this delay */
- tmp = get_timer (0);
- if ((tmp + tmo) < tmp )
- reset_timer_masked(); /* timer would roll over */
- else
- tmo += tmp;
-
- while (get_timer_masked () < tmo);
-}
-
-void reset_timer_masked (void)
-{
- /* reset time */
- lastdec = READ_TIMER();
- timestamp = 0;
-}
-
-ulong get_timer_masked (void)
-{
- ulong now = READ_TIMER();
-
- if (lastdec >= now) {
- /* normal mode */
- timestamp += (lastdec - now);
- } else {
- /* we have an overflow ... */
- timestamp += ((lastdec + timer_load_val) - now);
- }
- lastdec = now;
-
- return timestamp;
-}
-
-void udelay_masked (unsigned long usec)
-{
- ulong tmo;
- ulong endtime;
- signed long diff;
-
- /* normalize */
- if (usec >= 1000) {
- tmo = usec / 1000;
- tmo *= CONFIG_SYS_HZ;
- tmo /= 1000;
- } else {
- if (usec > 1) {
- tmo = usec * CONFIG_SYS_HZ;
- tmo /= (1000*1000);
- } else {
- tmo = 1;
- }
- }
-
- endtime = get_timer_masked () + tmo;
-
- do {
- ulong now = get_timer_masked ();
- diff = endtime - now;
- } while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
- ulong tbclk;
-
- tbclk = timer_load_val * 100;
-
- return tbclk;
-}
int tegra_set_emc(const void *blob, unsigned rate)
{
struct emc_ctlr *emc;
- const u32 *table;
+ const u32 *table = NULL;
int err, i;
err = decode_emc(blob, rate, &emc, &table);
.text :
{
__image_copy_start = .;
- CPUDIR/start.o (.text)
- *(.text)
+ CPUDIR/start.o (.text*)
+ *(.text*)
}
. = ALIGN(4);
. = ALIGN(4);
.data : {
- *(.data)
+ *(.data*)
}
. = ALIGN(4);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = ALIGN(4);
.bss __rel_dyn_start (OVERLAY) : {
__bss_start = .;
- *(.bss)
+ *(.bss*)
. = ALIGN(4);
__bss_end__ = .;
}
/DISCARD/ : { *(.interp*) }
/DISCARD/ : { *(.gnu*) }
}
+
+#if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE)
+ASSERT(__bss_end__ < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
+#endif
#include <asm/io.h>
#include <asm/imx-common/boot_mode.h>
#include <malloc.h>
+#include <command.h>
static const struct boot_mode *modes[2];
int size;
char *dest;
- if (__u_boot_cmd_bmode.usage) {
- free(__u_boot_cmd_bmode.usage);
- __u_boot_cmd_bmode.usage = NULL;
+ cmd_tbl_t *entry = ll_entry_get(cmd_tbl_t, bmode, cmd);
+
+ if (entry->usage) {
+ free(entry->usage);
+ entry->usage = NULL;
}
modes[0] = p;
dest = malloc(size);
if (dest) {
create_usage(dest);
- __u_boot_cmd_bmode.usage = dest;
+ entry->usage = dest;
}
}
unsigned int clktimer2clk; /* offset 0x08 */
};
+/* Control Module RTC registers */
+struct cm_rtc {
+ unsigned int rtcclkctrl; /* offset 0x0 */
+ unsigned int clkstctrl; /* offset 0x4 */
+};
+
/* Watchdog timer registers */
struct wd_timer {
unsigned int resv1[4];
unsigned int tcar2; /* offset 0x58 */
};
+/* RTC Registers */
+struct rtc_regs {
+ unsigned int res[21];
+ unsigned int osc; /* offset 0x54 */
+ unsigned int res2[5];
+ unsigned int kick0r; /* offset 0x6c */
+ unsigned int kick1r; /* offset 0x70 */
+};
+
/* UART Registers */
struct uart_sys {
unsigned int resv1[21];
#define PHY_DLL_LOCK_DIFF 0x0
#define DDR_CKE_CTRL_NORMAL 0x1
-#define DDR2_EMIF_READ_LATENCY 0x100005 /* Enable Dynamic Power Down */
-#define DDR2_EMIF_TIM1 0x0666B3C9
-#define DDR2_EMIF_TIM2 0x243631CA
-#define DDR2_EMIF_TIM3 0x0000033F
-#define DDR2_EMIF_SDCFG 0x41805332
-#define DDR2_EMIF_SDREF 0x0000081a
-#define DDR2_DLL_LOCK_DIFF 0x0
-#define DDR2_RATIO 0x80
-#define DDR2_INVERT_CLKOUT 0x00
-#define DDR2_RD_DQS 0x12
-#define DDR2_WR_DQS 0x00
-#define DDR2_PHY_WRLVL 0x00
-#define DDR2_PHY_GATELVL 0x00
-#define DDR2_PHY_WR_DATA 0x40
-#define DDR2_PHY_FIFO_WE 0x80
-#define DDR2_PHY_RANK0_DELAY 0x1
-#define DDR2_IOCTRL_VALUE 0x18B
+/* Micron MT47H128M16RT-25E */
+#define MT47H128M16RT25E_EMIF_READ_LATENCY 0x100005
+#define MT47H128M16RT25E_EMIF_TIM1 0x0666B3C9
+#define MT47H128M16RT25E_EMIF_TIM2 0x243631CA
+#define MT47H128M16RT25E_EMIF_TIM3 0x0000033F
+#define MT47H128M16RT25E_EMIF_SDCFG 0x41805332
+#define MT47H128M16RT25E_EMIF_SDREF 0x0000081a
+#define MT47H128M16RT25E_DLL_LOCK_DIFF 0x0
+#define MT47H128M16RT25E_RATIO 0x80
+#define MT47H128M16RT25E_INVERT_CLKOUT 0x00
+#define MT47H128M16RT25E_RD_DQS 0x12
+#define MT47H128M16RT25E_WR_DQS 0x00
+#define MT47H128M16RT25E_PHY_WRLVL 0x00
+#define MT47H128M16RT25E_PHY_GATELVL 0x00
+#define MT47H128M16RT25E_PHY_WR_DATA 0x40
+#define MT47H128M16RT25E_PHY_FIFO_WE 0x80
+#define MT47H128M16RT25E_PHY_RANK0_DELAY 0x1
+#define MT47H128M16RT25E_IOCTRL_VALUE 0x18B
/* Micron MT41J128M16JT-125 */
-#define DDR3_EMIF_READ_LATENCY 0x06
-#define DDR3_EMIF_TIM1 0x0888A39B
-#define DDR3_EMIF_TIM2 0x26337FDA
-#define DDR3_EMIF_TIM3 0x501F830F
-#define DDR3_EMIF_SDCFG 0x61C04AB2
-#define DDR3_EMIF_SDREF 0x0000093B
-#define DDR3_ZQ_CFG 0x50074BE4
-#define DDR3_DLL_LOCK_DIFF 0x1
-#define DDR3_RATIO 0x40
-#define DDR3_INVERT_CLKOUT 0x1
-#define DDR3_RD_DQS 0x3B
-#define DDR3_WR_DQS 0x85
-#define DDR3_PHY_WR_DATA 0xC1
-#define DDR3_PHY_FIFO_WE 0x100
-#define DDR3_IOCTRL_VALUE 0x18B
+#define MT41J128MJT125_EMIF_READ_LATENCY 0x06
+#define MT41J128MJT125_EMIF_TIM1 0x0888A39B
+#define MT41J128MJT125_EMIF_TIM2 0x26337FDA
+#define MT41J128MJT125_EMIF_TIM3 0x501F830F
+#define MT41J128MJT125_EMIF_SDCFG 0x61C04AB2
+#define MT41J128MJT125_EMIF_SDREF 0x0000093B
+#define MT41J128MJT125_ZQ_CFG 0x50074BE4
+#define MT41J128MJT125_DLL_LOCK_DIFF 0x1
+#define MT41J128MJT125_RATIO 0x40
+#define MT41J128MJT125_INVERT_CLKOUT 0x1
+#define MT41J128MJT125_RD_DQS 0x3B
+#define MT41J128MJT125_WR_DQS 0x85
+#define MT41J128MJT125_PHY_WR_DATA 0xC1
+#define MT41J128MJT125_PHY_FIFO_WE 0x100
+#define MT41J128MJT125_IOCTRL_VALUE 0x18B
/**
* Configure SDRAM
unsigned int ddrckectrl;
};
-void config_ddr(short ddr_type);
+void config_ddr(unsigned int pll, unsigned int ioctrl,
+ const struct ddr_data *data, const struct cmd_control *ctrl,
+ const struct emif_regs *regs);
#endif /* _DDR_DEFS_H */
#define CM_WKUP 0x44E00400
#define CM_DPLL 0x44E00500
#define CM_DEVICE 0x44E00700
+#define CM_RTC 0x44E00800
#define CM_CEFUSE 0x44E00A00
#define PRM_DEVICE 0x44E00F00
#define AM335X_CPSW_BASE 0x4A100000
#define AM335X_CPSW_MDIO_BASE 0x4A101000
+/* RTC base address */
+#define AM335X_RTC_BASE 0x44E3E000
+
#endif /* __AM33XX_HARDWARE_H */
--- /dev/null
+/*
+ * mux.h
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MUX_H_
+#define _MUX_H_
+
+#include <common.h>
+#include <asm/io.h>
+
+#define MUX_CFG(value, offset) \
+ __raw_writel(value, (CTRL_BASE + offset));
+
+/* PAD Control Fields */
+#define SLEWCTRL (0x1 << 6)
+#define RXACTIVE (0x1 << 5)
+#define PULLUP_EN (0x1 << 4) /* Pull UP Selection */
+#define PULLUDEN (0x0 << 3) /* Pull up enabled */
+#define PULLUDDIS (0x1 << 3) /* Pull up disabled */
+#define MODE(val) val /* used for Readability */
+
+/*
+ * PAD CONTROL OFFSETS
+ * Field names corresponds to the pad signal name
+ */
+struct pad_signals {
+ int gpmc_ad0;
+ int gpmc_ad1;
+ int gpmc_ad2;
+ int gpmc_ad3;
+ int gpmc_ad4;
+ int gpmc_ad5;
+ int gpmc_ad6;
+ int gpmc_ad7;
+ int gpmc_ad8;
+ int gpmc_ad9;
+ int gpmc_ad10;
+ int gpmc_ad11;
+ int gpmc_ad12;
+ int gpmc_ad13;
+ int gpmc_ad14;
+ int gpmc_ad15;
+ int gpmc_a0;
+ int gpmc_a1;
+ int gpmc_a2;
+ int gpmc_a3;
+ int gpmc_a4;
+ int gpmc_a5;
+ int gpmc_a6;
+ int gpmc_a7;
+ int gpmc_a8;
+ int gpmc_a9;
+ int gpmc_a10;
+ int gpmc_a11;
+ int gpmc_wait0;
+ int gpmc_wpn;
+ int gpmc_be1n;
+ int gpmc_csn0;
+ int gpmc_csn1;
+ int gpmc_csn2;
+ int gpmc_csn3;
+ int gpmc_clk;
+ int gpmc_advn_ale;
+ int gpmc_oen_ren;
+ int gpmc_wen;
+ int gpmc_be0n_cle;
+ int lcd_data0;
+ int lcd_data1;
+ int lcd_data2;
+ int lcd_data3;
+ int lcd_data4;
+ int lcd_data5;
+ int lcd_data6;
+ int lcd_data7;
+ int lcd_data8;
+ int lcd_data9;
+ int lcd_data10;
+ int lcd_data11;
+ int lcd_data12;
+ int lcd_data13;
+ int lcd_data14;
+ int lcd_data15;
+ int lcd_vsync;
+ int lcd_hsync;
+ int lcd_pclk;
+ int lcd_ac_bias_en;
+ int mmc0_dat3;
+ int mmc0_dat2;
+ int mmc0_dat1;
+ int mmc0_dat0;
+ int mmc0_clk;
+ int mmc0_cmd;
+ int mii1_col;
+ int mii1_crs;
+ int mii1_rxerr;
+ int mii1_txen;
+ int mii1_rxdv;
+ int mii1_txd3;
+ int mii1_txd2;
+ int mii1_txd1;
+ int mii1_txd0;
+ int mii1_txclk;
+ int mii1_rxclk;
+ int mii1_rxd3;
+ int mii1_rxd2;
+ int mii1_rxd1;
+ int mii1_rxd0;
+ int rmii1_refclk;
+ int mdio_data;
+ int mdio_clk;
+ int spi0_sclk;
+ int spi0_d0;
+ int spi0_d1;
+ int spi0_cs0;
+ int spi0_cs1;
+ int ecap0_in_pwm0_out;
+ int uart0_ctsn;
+ int uart0_rtsn;
+ int uart0_rxd;
+ int uart0_txd;
+ int uart1_ctsn;
+ int uart1_rtsn;
+ int uart1_rxd;
+ int uart1_txd;
+ int i2c0_sda;
+ int i2c0_scl;
+ int mcasp0_aclkx;
+ int mcasp0_fsx;
+ int mcasp0_axr0;
+ int mcasp0_ahclkr;
+ int mcasp0_aclkr;
+ int mcasp0_fsr;
+ int mcasp0_axr1;
+ int mcasp0_ahclkx;
+ int xdma_event_intr0;
+ int xdma_event_intr1;
+ int nresetin_out;
+ int porz;
+ int nnmi;
+ int osc0_in;
+ int osc0_out;
+ int rsvd1;
+ int tms;
+ int tdi;
+ int tdo;
+ int tck;
+ int ntrst;
+ int emu0;
+ int emu1;
+ int osc1_in;
+ int osc1_out;
+ int pmic_power_en;
+ int rtc_porz;
+ int rsvd2;
+ int ext_wakeup;
+ int enz_kaldo_1p8v;
+ int usb0_dm;
+ int usb0_dp;
+ int usb0_ce;
+ int usb0_id;
+ int usb0_vbus;
+ int usb0_drvvbus;
+ int usb1_dm;
+ int usb1_dp;
+ int usb1_ce;
+ int usb1_id;
+ int usb1_vbus;
+ int usb1_drvvbus;
+ int ddr_resetn;
+ int ddr_csn0;
+ int ddr_cke;
+ int ddr_ck;
+ int ddr_nck;
+ int ddr_casn;
+ int ddr_rasn;
+ int ddr_wen;
+ int ddr_ba0;
+ int ddr_ba1;
+ int ddr_ba2;
+ int ddr_a0;
+ int ddr_a1;
+ int ddr_a2;
+ int ddr_a3;
+ int ddr_a4;
+ int ddr_a5;
+ int ddr_a6;
+ int ddr_a7;
+ int ddr_a8;
+ int ddr_a9;
+ int ddr_a10;
+ int ddr_a11;
+ int ddr_a12;
+ int ddr_a13;
+ int ddr_a14;
+ int ddr_a15;
+ int ddr_odt;
+ int ddr_d0;
+ int ddr_d1;
+ int ddr_d2;
+ int ddr_d3;
+ int ddr_d4;
+ int ddr_d5;
+ int ddr_d6;
+ int ddr_d7;
+ int ddr_d8;
+ int ddr_d9;
+ int ddr_d10;
+ int ddr_d11;
+ int ddr_d12;
+ int ddr_d13;
+ int ddr_d14;
+ int ddr_d15;
+ int ddr_dqm0;
+ int ddr_dqm1;
+ int ddr_dqs0;
+ int ddr_dqsn0;
+ int ddr_dqs1;
+ int ddr_dqsn1;
+ int ddr_vref;
+ int ddr_vtp;
+ int ddr_strben0;
+ int ddr_strben1;
+ int ain7;
+ int ain6;
+ int ain5;
+ int ain4;
+ int ain3;
+ int ain2;
+ int ain1;
+ int ain0;
+ int vrefp;
+ int vrefn;
+};
+
+struct module_pin_mux {
+ short reg_offset;
+ unsigned char val;
+};
+
+/* Pad control register offset */
+#define PAD_CTRL_BASE 0x800
+#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \
+ (PAD_CTRL_BASE))->x)
+
+/*
+ * Configure the pin mux for the module
+ */
+void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux);
+
+#endif
#define BOOT_DEVICE_NAND 5
#define BOOT_DEVICE_MMC1 8
#define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */
+#define BOOT_DEVICE_SPI 11
#define BOOT_DEVICE_UART 65
#define BOOT_DEVICE_CPGMAC 70
#define BOOT_DEVICE_MMC2_2 0xFF
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
-/*
- * AM335x parts define a system EEPROM that defines certain sub-fields.
- * We use these fields to in turn see what board we are on, and what
- * that might require us to set or not set.
- */
-#define HDR_NO_OF_MAC_ADDR 3
-#define HDR_ETH_ALEN 6
-#define HDR_NAME_LEN 8
-
-struct am335x_baseboard_id {
- unsigned int magic;
- char name[HDR_NAME_LEN];
- char version[4];
- char serial[12];
- char config[32];
- char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN];
-};
-
#define BOARD_REV_ID 0x0
u32 get_cpu_rev(void);
void setup_clocks_for_console(void);
void ddr_pll_config(unsigned int ddrpll_M);
-/*
- * We have three pin mux functions that must exist. We must be able to enable
- * uart0, for initial output and i2c0 to read the main EEPROM. We then have a
- * main pinmux function that can be overridden to enable all other pinmux that
- * is required on the board.
- */
-void enable_uart0_pin_mux(void);
-void enable_i2c0_pin_mux(void);
-void enable_board_pin_mux(struct am335x_baseboard_id *header);
#endif
* MA 02111-1307 USA
*/
-#if defined(CONFIG_NETARM)
-#include <asm/arch-arm720t/netarm_registers.h>
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
+#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
/* include IntegratorCP/CM720T specific hardware file if there was one */
#else
#error No hardware file defined for this configuration
+++ /dev/null
-/* * include/asm-armnommu/arch-netarm/netarm_dma_module.h
- *
- * Copyright (C) 2000 NETsilicon, Inc.
- * Copyright (C) 2000 WireSpeed Communications Corporation
- *
- * This software is copyrighted by WireSpeed. LICENSEE agrees that
- * it will not delete this copyright notice, trademarks or protective
- * notices from any copy made by LICENSEE.
- *
- * This software is provided "AS-IS" and any express or implied
- * warranties or conditions, including but not limited to any
- * implied warranties of merchantability and fitness for a particular
- * purpose regarding this software. In no event shall WireSpeed
- * be liable for any indirect, consequential, or incidental damages,
- * loss of profits or revenue, loss of use or data, or interruption
- * of business, whether the alleged damages are labeled in contract,
- * tort, or indemnity.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * author(s) : Joe deBlaquiere
- * David Smith
- */
-
-#ifndef __NETARM_DMA_MODULE_REGISTERS_H
-#define __NETARM_DMA_MODULE_REGISTERS_H
-
-/* GEN unit register offsets */
-
-#define NETARM_DMA_MODULE_BASE (0xFF900000)
-
-#define get_dma_reg_addr(c) ((volatile unsigned int *)(NETARM_DMA_MODULE_BASE + (c)))
-
-#define NETARM_DMA1A_BFR_DESCRPTOR_PTR (0x00)
-#define NETARM_DMA1A_CONTROL (0x10)
-#define NETARM_DMA1A_STATUS (0x14)
-#define NETARM_DMA1B_BFR_DESCRPTOR_PTR (0x20)
-#define NETARM_DMA1B_CONTROL (0x30)
-#define NETARM_DMA1B_STATUS (0x34)
-#define NETARM_DMA1C_BFR_DESCRPTOR_PTR (0x40)
-#define NETARM_DMA1C_CONTROL (0x50)
-#define NETARM_DMA1C_STATUS (0x54)
-#define NETARM_DMA1D_BFR_DESCRPTOR_PTR (0x60)
-#define NETARM_DMA1D_CONTROL (0x70)
-#define NETARM_DMA1D_STATUS (0x74)
-
-#define NETARM_DMA2_BFR_DESCRPTOR_PTR (0x80)
-#define NETARM_DMA2_CONTROL (0x90)
-#define NETARM_DMA2_STATUS (0x94)
-
-#define NETARM_DMA3_BFR_DESCRPTOR_PTR (0xA0)
-#define NETARM_DMA3_CONTROL (0xB0)
-#define NETARM_DMA3_STATUS (0xB4)
-
-#define NETARM_DMA4_BFR_DESCRPTOR_PTR (0xC0)
-#define NETARM_DMA4_CONTROL (0xD0)
-#define NETARM_DMA4_STATUS (0xD4)
-
-#define NETARM_DMA5_BFR_DESCRPTOR_PTR (0xE0)
-#define NETARM_DMA5_CONTROL (0xF0)
-#define NETARM_DMA5_STATUS (0xF4)
-
-#define NETARM_DMA6_BFR_DESCRPTOR_PTR (0x100)
-#define NETARM_DMA6_CONTROL (0x110)
-#define NETARM_DMA6_STATUS (0x114)
-
-#define NETARM_DMA7_BFR_DESCRPTOR_PTR (0x120)
-#define NETARM_DMA7_CONTROL (0x130)
-#define NETARM_DMA7_STATUS (0x134)
-
-#define NETARM_DMA8_BFR_DESCRPTOR_PTR (0x140)
-#define NETARM_DMA8_CONTROL (0x150)
-#define NETARM_DMA8_STATUS (0x154)
-
-#define NETARM_DMA9_BFR_DESCRPTOR_PTR (0x160)
-#define NETARM_DMA9_CONTROL (0x170)
-#define NETARM_DMA9_STATUS (0x174)
-
-#define NETARM_DMA10_BFR_DESCRPTOR_PTR (0x180)
-#define NETARM_DMA10_CONTROL (0x190)
-#define NETARM_DMA10_STATUS (0x194)
-
-/* select bitfield defintions */
-
-/* DMA Control Register ( 0xFF90_0XX0 ) */
-
-#define NETARM_DMA_CTL_ENABLE (0x80000000)
-
-#define NETARM_DMA_CTL_ABORT (0x40000000)
-
-#define NETARM_DMA_CTL_BUS_100_PERCENT (0x00000000)
-#define NETARM_DMA_CTL_BUS_75_PERCENT (0x10000000)
-#define NETARM_DMA_CTL_BUS_50_PERCENT (0x20000000)
-#define NETARM_DMA_CTL_BUS_25_PERCENT (0x30000000)
-
-#define NETARM_DMA_CTL_BUS_MASK (0x30000000)
-
-#define NETARM_DMA_CTL_MODE_FB_TO_MEM (0x00000000)
-#define NETARM_DMA_CTL_MODE_FB_FROM_MEM (0x04000000)
-#define NETARM_DMA_CTL_MODE_MEM_TO_MEM (0x08000000)
-
-#define NETARM_DMA_CTL_BURST_NONE (0x00000000)
-#define NETARM_DMA_CTL_BURST_8_BYTE (0x01000000)
-#define NETARM_DMA_CTL_BURST_16_BYTE (0x02000000)
-
-#define NETARM_DMA_CTL_BURST_MASK (0x03000000)
-
-#define NETARM_DMA_CTL_SRC_INCREMENT (0x00200000)
-
-#define NETARM_DMA_CTL_DST_INCREMENT (0x00100000)
-
-/* these apply only to ext xfers on DMA 3 or 4 */
-
-#define NETARM_DMA_CTL_CH_3_4_REQ_EXT (0x00800000)
-
-#define NETARM_DMA_CTL_CH_3_4_DATA_32 (0x00000000)
-#define NETARM_DMA_CTL_CH_3_4_DATA_16 (0x00010000)
-#define NETARM_DMA_CTL_CH_3_4_DATA_8 (0x00020000)
-
-#define NETARM_DMA_CTL_STATE(X) ((X) & 0xFC00)
-#define NETARM_DMA_CTL_INDEX(X) ((X) & 0x03FF)
-
-/* DMA Status Register ( 0xFF90_0XX4 ) */
-
-#define NETARM_DMA_STAT_NC_INTPEN (0x80000000)
-#define NETARM_DMA_STAT_EC_INTPEN (0x40000000)
-#define NETARM_DMA_STAT_NR_INTPEN (0x20000000)
-#define NETARM_DMA_STAT_CA_INTPEN (0x10000000)
-#define NETARM_DMA_STAT_INTPEN_MASK (0xF0000000)
-
-#define NETARM_DMA_STAT_NC_INT_EN (0x00800000)
-#define NETARM_DMA_STAT_EC_INT_EN (0x00400000)
-#define NETARM_DMA_STAT_NR_INT_EN (0x00200000)
-#define NETARM_DMA_STAT_CA_INT_EN (0x00100000)
-#define NETARM_DMA_STAT_INT_EN_MASK (0x00F00000)
-
-#define NETARM_DMA_STAT_WRAP (0x00080000)
-#define NETARM_DMA_STAT_IDONE (0x00040000)
-#define NETARM_DMA_STAT_LAST (0x00020000)
-#define NETARM_DMA_STAT_FULL (0x00010000)
-
-#define NETARM_DMA_STAT_BUFLEN(X) ((X) & 0x7FFF)
-
-/* DMA Buffer Descriptor Word 0 bitfields. */
-
-#define NETARM_DMA_BD0_WRAP (0x80000000)
-#define NETARM_DMA_BD0_IDONE (0x40000000)
-#define NETARM_DMA_BD0_LAST (0x20000000)
-#define NETARM_DMA_BD0_BUFPTR_MASK (0x1FFFFFFF)
-
-/* DMA Buffer Descriptor Word 1 bitfields. */
-
-#define NETARM_DMA_BD1_STATUS_MASK (0xFFFF0000)
-#define NETARM_DMA_BD1_FULL (0x00008000)
-#define NETARM_DMA_BD1_BUFLEN_MASK (0x00007FFF)
-
-#ifndef __ASSEMBLER__
-
-typedef struct __NETARM_DMA_Buff_Desc_FlyBy
-{
- unsigned int word0;
- unsigned int word1;
-} NETARM_DMA_Buff_Desc_FlyBy, *pNETARM_DMA_Buff_Desc_FlyBy ;
-
-typedef struct __NETARM_DMA_Buff_Desc_M_to_M
-{
- unsigned int word0;
- unsigned int word1;
- unsigned int word2;
- unsigned int word3;
-} NETARM_DMA_Buff_Desc_M_to_M, *pNETARM_DMA_Buff_Desc_M_to_M ;
-
-#endif
-
-#endif
+++ /dev/null
-/*
- * include/asm-armnommu/arch-netarm/netarm_eni_module.h
- *
- * Copyright (C) 2000 NETsilicon, Inc.
- * Copyright (C) 2000 WireSpeed Communications Corporation
- *
- * This software is copyrighted by WireSpeed. LICENSEE agrees that
- * it will not delete this copyright notice, trademarks or protective
- * notices from any copy made by LICENSEE.
- *
- * This software is provided "AS-IS" and any express or implied
- * warranties or conditions, including but not limited to any
- * implied warranties of merchantability and fitness for a particular
- * purpose regarding this software. In no event shall WireSpeed
- * be liable for any indirect, consequential, or incidental damages,
- * loss of profits or revenue, loss of use or data, or interruption
- * of business, whether the alleged damages are labeled in contract,
- * tort, or indemnity.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * author(s) : David Smith
- */
-
-#ifndef __NETARM_ENI_MODULE_REGISTERS_H
-#define __NETARM_ENI_MODULE_REGISTERS_H
-
-/* ENI unit register offsets */
-
-/* #ifdef CONFIG_ARCH_NETARM */
-#define NETARM_ENI_MODULE_BASE (0xFFA00000)
-/* #endif / * CONFIG_ARCH_NETARM */
-
-#define get_eni_reg_addr(c) ((volatile unsigned int *)(NETARM_ENI_MODULE_BASE + (c)))
-#define get_eni_ctl_reg_addr(minor) \
- (get_eni_reg_addr(NETARM_ENI_1284_PORT1_CONTROL) + (minor))
-
-#define NETARM_ENI_GENERAL_CONTROL (0x00)
-#define NETARM_ENI_STATUS_CONTROL (0x04)
-#define NETARM_ENI_FIFO_MODE_DATA (0x08)
-
-#define NETARM_ENI_1284_PORT1_CONTROL (0x10)
-#define NETARM_ENI_1284_PORT2_CONTROL (0x14)
-#define NETARM_ENI_1284_PORT3_CONTROL (0x18)
-#define NETARM_ENI_1284_PORT4_CONTROL (0x1c)
-
-#define NETARM_ENI_1284_CHANNEL1_DATA (0x20)
-#define NETARM_ENI_1284_CHANNEL2_DATA (0x24)
-#define NETARM_ENI_1284_CHANNEL3_DATA (0x28)
-#define NETARM_ENI_1284_CHANNEL4_DATA (0x2c)
-
-#define NETARM_ENI_ENI_CONTROL (0x30)
-#define NETARM_ENI_ENI_PULSED_INTR (0x34)
-#define NETARM_ENI_ENI_SHARED_RAM_ADDR (0x38)
-#define NETARM_ENI_ENI_SHARED (0x3c)
-
-/* select bitfield defintions */
-
-/* General Control Register (0xFFA0_0000) */
-
-#define NETARM_ENI_GCR_ENIMODE_IEEE1284 (0x00000001)
-#define NETARM_ENI_GCR_ENIMODE_SHRAM16 (0x00000004)
-#define NETARM_ENI_GCR_ENIMODE_SHRAM8 (0x00000005)
-#define NETARM_ENI_GCR_ENIMODE_FIFO16 (0x00000006)
-#define NETARM_ENI_GCR_ENIMODE_FIFO8 (0x00000007)
-
-#define NETARM_ENI_GCR_ENIMODE_MASK (0x00000007)
-
-/* IEEE 1284 Port Control Registers 1-4 (0xFFA0_0010, 0xFFA0_0014,
- 0xFFA0_0018, 0xFFA0_001c) */
-
-#define NETARM_ENI_1284PC_PORT_ENABLE (0x80000000)
-#define NETARM_ENI_1284PC_DMA_ENABLE (0x40000000)
-#define NETARM_ENI_1284PC_OBE_INT_EN (0x20000000)
-#define NETARM_ENI_1284PC_ACK_INT_EN (0x10000000)
-#define NETARM_ENI_1284PC_ECP_MODE (0x08000000)
-#define NETARM_ENI_1284PC_LOOPBACK_MODE (0x04000000)
-
-#define NETARM_ENI_1284PC_STROBE_TIME0 (0x00000000) /* 0.5 uS */
-#define NETARM_ENI_1284PC_STROBE_TIME1 (0x01000000) /* 1.0 uS */
-#define NETARM_ENI_1284PC_STROBE_TIME2 (0x02000000) /* 5.0 uS */
-#define NETARM_ENI_1284PC_STROBE_TIME3 (0x03000000) /* 10.0 uS */
-#define NETARM_ENI_1284PC_STROBE_MASK (0x03000000)
-
-#define NETARM_ENI_1284PC_MAN_STROBE_EN (0x00800000)
-#define NETARM_ENI_1284PC_FAST_MODE (0x00400000)
-#define NETARM_ENI_1284PC_BIDIR_MODE (0x00200000)
-
-#define NETARM_ENI_1284PC_MAN_STROBE (0x00080000)
-#define NETARM_ENI_1284PC_AUTO_FEED (0x00040000)
-#define NETARM_ENI_1284PC_INIT (0x00020000)
-#define NETARM_ENI_1284PC_HSELECT (0x00010000)
-#define NETARM_ENI_1284PC_FE_INT_EN (0x00008000)
-#define NETARM_ENI_1284PC_EPP_MODE (0x00004000)
-#define NETARM_ENI_1284PC_IBR_INT_EN (0x00002000)
-#define NETARM_ENI_1284PC_IBR (0x00001000)
-
-#define NETARM_ENI_1284PC_RXFDB_1BYTE (0x00000400)
-#define NETARM_ENI_1284PC_RXFDB_2BYTE (0x00000800)
-#define NETARM_ENI_1284PC_RXFDB_3BYTE (0x00000c00)
-#define NETARM_ENI_1284PC_RXFDB_4BYTE (0x00000000)
-
-#define NETARM_ENI_1284PC_RBCC (0x00000200)
-#define NETARM_ENI_1284PC_RBCT (0x00000100)
-#define NETARM_ENI_1284PC_ACK (0x00000080)
-#define NETARM_ENI_1284PC_FIFO_E (0x00000040)
-#define NETARM_ENI_1284PC_OBE (0x00000020)
-#define NETARM_ENI_1284PC_ACK_INT (0x00000010)
-#define NETARM_ENI_1284PC_BUSY (0x00000008)
-#define NETARM_ENI_1284PC_PE (0x00000004)
-#define NETARM_ENI_1284PC_PSELECT (0x00000002)
-#define NETARM_ENI_1284PC_FAULT (0x00000001)
-
-#endif /* __NETARM_ENI_MODULE_REGISTERS_H */
+++ /dev/null
-/*
- * include/asm-armnommu/arch-netarm/netarm_eth_module.h
- *
- * Copyright (C) 2000 NETsilicon, Inc.
- * Copyright (C) 2000 WireSpeed Communications Corporation
- *
- * This software is copyrighted by WireSpeed. LICENSEE agrees that
- * it will not delete this copyright notice, trademarks or protective
- * notices from any copy made by LICENSEE.
- *
- * This software is provided "AS-IS" and any express or implied
- * warranties or conditions, including but not limited to any
- * implied warranties of merchantability and fitness for a particular
- * purpose regarding this software. In no event shall WireSpeed
- * be liable for any indirect, consequential, or incidental damages,
- * loss of profits or revenue, loss of use or data, or interruption
- * of business, whether the alleged damages are labeled in contract,
- * tort, or indemnity.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * author(s) : Jackie Smith Cashion
- * David Smith
- */
-
-#ifndef __NETARM_ETH_MODULE_REGISTERS_H
-#define __NETARM_ETH_MODULE_REGISTERS_H
-
-/* ETH unit register offsets */
-
-#define NETARM_ETH_MODULE_BASE (0xFF800000)
-
-#define get_eth_reg_addr(c) ((volatile unsigned int *)(NETARM_ETH_MODULE_BASE + (c)))
-
-#define NETARM_ETH_GEN_CTRL (0x000) /* Ethernet Gen Control Reg */
-#define NETARM_ETH_GEN_STAT (0x004) /* Ethernet Gen Status Reg */
-#define NETARM_ETH_FIFO_DAT1 (0x008) /* Fifo Data Reg 1 */
-#define NETARM_ETH_FIFO_DAT2 (0x00C) /* Fifo Data Reg 2 */
-#define NETARM_ETH_TX_STAT (0x010) /* Transmit Status Reg */
-#define NETARM_ETH_RX_STAT (0x014) /* Receive Status Reg */
-
-#define NETARM_ETH_MAC_CFG (0x400) /* MAC Configuration Reg */
-#define NETARM_ETH_PCS_CFG (0x408) /* PCS Configuration Reg */
-#define NETARM_ETH_STL_CFG (0x410) /* STL Configuration Reg */
-#define NETARM_ETH_B2B_IPG_GAP_TMR (0x440) /* Back-to-back IPG
- Gap Timer Reg */
-#define NETARM_ETH_NB2B_IPG_GAP_TMR (0x444) /* Non Back-to-back
- IPG Gap Timer Reg */
-#define NETARM_ETH_MII_CMD (0x540) /* MII (PHY) Command Reg */
-#define NETARM_ETH_MII_ADDR (0x544) /* MII Address Reg */
-#define NETARM_ETH_MII_WRITE (0x548) /* MII Write Data Reg */
-#define NETARM_ETH_MII_READ (0x54C) /* MII Read Data Reg */
-#define NETARM_ETH_MII_IND (0x550) /* MII Indicators Reg */
-#define NETARM_ETH_MIB_CRCEC (0x580) /* (MIB) CRC Error Counter */
-#define NETARM_ETH_MIB_AEC (0x584) /* Alignment Error Counter */
-#define NETARM_ETH_MIB_CEC (0x588) /* Code Error Counter */
-#define NETARM_ETH_MIB_LFC (0x58C) /* Long Frame Counter */
-#define NETARM_ETH_MIB_SFC (0x590) /* Short Frame Counter */
-#define NETARM_ETH_MIB_LCC (0x594) /* Late Collision Counter */
-#define NETARM_ETH_MIB_EDC (0x598) /* Excessive Deferral
- Counter */
-#define NETARM_ETH_MIB_MCC (0x59C) /* Maximum Collision Counter */
-#define NETARM_ETH_SAL_FILTER (0x5C0) /* SAL Station Address
- Filter Reg */
-#define NETARM_ETH_SAL_STATION_ADDR_1 (0x5C4) /* SAL Station Address
- Reg */
-#define NETARM_ETH_SAL_STATION_ADDR_2 (0x5C8)
-#define NETARM_ETH_SAL_STATION_ADDR_3 (0x5CC)
-#define NETARM_ETH_SAL_HASH_TBL_1 (0x5D0) /* SAL Multicast Hash Table*/
-#define NETARM_ETH_SAL_HASH_TBL_2 (0x5D4)
-#define NETARM_ETH_SAL_HASH_TBL_3 (0x5D8)
-#define NETARM_ETH_SAL_HASH_TBL_4 (0x5DC)
-
-/* select bitfield defintions */
-
-/* Ethernet General Control Register (0xFF80_0000) */
-
-#define NETARM_ETH_GCR_ERX (0x80000000) /* Enable Receive FIFO */
-#define NETARM_ETH_GCR_ERXDMA (0x40000000) /* Enable Receive DMA */
-#define NETARM_ETH_GCR_ETX (0x00800000) /* Enable Transmit FIFO */
-#define NETARM_ETH_GCR_ETXDMA (0x00400000) /* Enable Transmit DMA */
-#define NETARM_ETH_GCR_ETXWM_50 (0x00100000) /* Transmit FIFO Water
- Mark. Start transmit
- when FIFO is 50%
- full. */
-#define NETARM_ETH_GCR_PNA (0x00000400) /* pSOS pNA Buffer
- Descriptor Format */
-
-/* Ethernet General Status Register (0xFF80_0004) */
-
-#define NETARM_ETH_GST_RXFDB (0x30000000)
-#define NETARM_ETH_GST_RXREGR (0x08000000) /* Receive Register
- Ready */
-#define NETARM_ETH_GST_RXFIFOH (0x04000000)
-#define NETARM_ETH_GST_RXBR (0x02000000)
-#define NETARM_ETH_GST_RXSKIP (0x01000000)
-
-#define NETARM_ETH_GST_TXBC (0x00020000)
-
-
-/* Ethernet Transmit Status Register (0xFF80_0010) */
-
-#define NETARM_ETH_TXSTAT_TXOK (0x00008000)
-
-
-/* Ethernet Receive Status Register (0xFF80_0014) */
-
-#define NETARM_ETH_RXSTAT_SIZE (0xFFFF0000)
-#define NETARM_ETH_RXSTAT_RXOK (0x00002000)
-
-
-/* PCS Configuration Register (0xFF80_0408) */
-
-#define NETARM_ETH_PCSC_NOCFR (0x1) /* Disable Ciphering */
-#define NETARM_ETH_PCSC_ENJAB (0x2) /* Enable Jabber Protection */
-#define NETARM_ETH_PCSC_CLKS_25M (0x0) /* 25 MHz Clock Speed Select */
-#define NETARM_ETH_PCSC_CLKS_33M (0x4) /* 33 MHz Clock Speed Select */
-
-/* STL Configuration Register (0xFF80_0410) */
-
-#define NETARM_ETH_STLC_RXEN (0x2) /* Enable Packet Receiver */
-#define NETARM_ETH_STLC_AUTOZ (0x4) /* Auto Zero Statistics */
-
-/* MAC Configuration Register (0xFF80_0400) */
-
-#define NETARM_ETH_MACC_HUGEN (0x1) /* Enable Unlimited Transmit
- Frame Sizes */
-#define NETARM_ETH_MACC_PADEN (0x4) /* Automatic Pad Fill Frames
- to 64 Bytes */
-#define NETARM_ETH_MACC_CRCEN (0x8) /* Append CRC to Transmit
- Frames */
-
-/* MII (PHY) Command Register (0xFF80_0540) */
-
-#define NETARM_ETH_MIIC_RSTAT (0x1) /* Single Scan for Read Data */
-
-/* MII Indicators Register (0xFF80_0550) */
-
-#define NETARM_ETH_MIII_BUSY (0x1) /* MII I/F Busy with
- Read/Write */
-
-/* SAL Station Address Filter Register (0xFF80_05C0) */
-
-#define NETARM_ETH_SALF_PRO (0x8) /* Enable Promiscuous Mode */
-#define NETARM_ETH_SALF_PRM (0x4) /* Accept All Multicast
- Packets */
-#define NETARM_ETH_SALF_PRA (0x2) /* Accept Mulitcast Packets
- using Hash Table */
-#define NETARM_ETH_SALF_BROAD (0x1) /* Accept All Broadcast
- Packets */
-
-
-#endif /* __NETARM_GEN_MODULE_REGISTERS_H */
+++ /dev/null
-/*
- * include/asm-armnommu/arch-netarm/netarm_gen_module.h
- *
- * Copyright (C) 2005
- * Art Shipkowski, Videon Central, Inc., <art@videon-central.com>
- *
- * Copyright (C) 2000, 2001 NETsilicon, Inc.
- * Copyright (C) 2000, 2001 Red Hat, Inc.
- *
- * This software is copyrighted by Red Hat. LICENSEE agrees that
- * it will not delete this copyright notice, trademarks or protective
- * notices from any copy made by LICENSEE.
- *
- * This software is provided "AS-IS" and any express or implied
- * warranties or conditions, including but not limited to any
- * implied warranties of merchantability and fitness for a particular
- * purpose regarding this software. In no event shall Red Hat
- * be liable for any indirect, consequential, or incidental damages,
- * loss of profits or revenue, loss of use or data, or interruption
- * of business, whether the alleged damages are labeled in contract,
- * tort, or indemnity.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * author(s) : Joe deBlaquiere
- *
- * Modified to support NS7520 by Art Shipkowski.
- */
-
-#ifndef __NETARM_GEN_MODULE_REGISTERS_H
-#define __NETARM_GEN_MODULE_REGISTERS_H
-
-/* GEN unit register offsets */
-
-#define NETARM_GEN_MODULE_BASE (0xFFB00000)
-
-#define get_gen_reg_addr(c) ((volatile unsigned int *)(NETARM_GEN_MODULE_BASE + (c)))
-
-#define NETARM_GEN_SYSTEM_CONTROL (0x00)
-#define NETARM_GEN_STATUS_CONTROL (0x04)
-#define NETARM_GEN_PLL_CONTROL (0x08)
-#define NETARM_GEN_SOFTWARE_SERVICE (0x0c)
-
-#define NETARM_GEN_TIMER1_CONTROL (0x10)
-#define NETARM_GEN_TIMER1_STATUS (0x14)
-#define NETARM_GEN_TIMER2_CONTROL (0x18)
-#define NETARM_GEN_TIMER2_STATUS (0x1c)
-
-#define NETARM_GEN_PORTA (0x20)
-#ifndef CONFIG_NETARM_NS7520
-#define NETARM_GEN_PORTB (0x24)
-#endif
-#define NETARM_GEN_PORTC (0x28)
-
-#define NETARM_GEN_INTR_ENABLE (0x30)
-#define NETARM_GEN_INTR_ENABLE_SET (0x34)
-#define NETARM_GEN_INTR_ENABLE_CLR (0x38)
-#define NETARM_GEN_INTR_STATUS_EN (0x34)
-#define NETARM_GEN_INTR_STATUS_RAW (0x38)
-
-#define NETARM_GEN_CACHE_CONTROL1 (0x40)
-#define NETARM_GEN_CACHE_CONTROL2 (0x44)
-
-/* select bitfield definitions */
-
-/* System Control Register ( 0xFFB0_0000 ) */
-
-#define NETARM_GEN_SYS_CFG_LENDIAN (0x80000000)
-#define NETARM_GEN_SYS_CFG_BENDIAN (0x00000000)
-
-#define NETARM_GEN_SYS_CFG_BUSQRTR (0x00000000)
-#define NETARM_GEN_SYS_CFG_BUSHALF (0x20000000)
-#define NETARM_GEN_SYS_CFG_BUSFULL (0x40000000)
-
-#define NETARM_GEN_SYS_CFG_BCLK_DISABLE (0x10000000)
-
-#define NETARM_GEN_SYS_CFG_WDOG_EN (0x01000000)
-#define NETARM_GEN_SYS_CFG_WDOG_IRQ (0x00000000)
-#define NETARM_GEN_SYS_CFG_WDOG_FIQ (0x00400000)
-#define NETARM_GEN_SYS_CFG_WDOG_RST (0x00800000)
-#define NETARM_GEN_SYS_CFG_WDOG_24 (0x00000000)
-#define NETARM_GEN_SYS_CFG_WDOG_26 (0x00100000)
-#define NETARM_GEN_SYS_CFG_WDOG_28 (0x00200000)
-#define NETARM_GEN_SYS_CFG_WDOG_29 (0x00300000)
-
-#define NETARM_GEN_SYS_CFG_BUSMON_EN (0x00040000)
-#define NETARM_GEN_SYS_CFG_BUSMON_128 (0x00000000)
-#define NETARM_GEN_SYS_CFG_BUSMON_64 (0x00010000)
-#define NETARM_GEN_SYS_CFG_BUSMON_32 (0x00020000)
-#define NETARM_GEN_SYS_CFG_BUSMON_16 (0x00030000)
-
-#define NETARM_GEN_SYS_CFG_USER_EN (0x00008000)
-#define NETARM_GEN_SYS_CFG_BUSER_EN (0x00004000)
-
-#define NETARM_GEN_SYS_CFG_BUSARB_INT (0x00002000)
-#define NETARM_GEN_SYS_CFG_BUSARB_EXT (0x00000000)
-
-#define NETARM_GEN_SYS_CFG_DMATST (0x00001000)
-
-#define NETARM_GEN_SYS_CFG_TEALAST (0x00000800)
-
-#define NETARM_GEN_SYS_CFG_ALIGN_ABORT (0x00000400)
-
-#define NETARM_GEN_SYS_CFG_CACHE_EN (0x00000200)
-
-#define NETARM_GEN_SYS_CFG_WRI_BUF_EN (0x00000100)
-
-#define NETARM_GEN_SYS_CFG_CACHE_INIT (0x00000080)
-
-/* PLL Control Register ( 0xFFB0_0008 ) */
-
-#define NETARM_GEN_PLL_CTL_PLLCNT_MASK (0x0F000000)
-
-#define NETARM_GEN_PLL_CTL_PLLCNT(x) (((x)<<24) & \
- NETARM_GEN_PLL_CTL_PLLCNT_MASK)
-
-/* Defaults for POLTST and ICP Fields in PLL CTL */
-#define NETARM_GEN_PLL_CTL_OUTDIV(x) (x)
-#define NETARM_GEN_PLL_CTL_INDIV(x) ((x)<<6)
-#define NETARM_GEN_PLL_CTL_POLTST_DEF (0x00000E00)
-#define NETARM_GEN_PLL_CTL_ICP_DEF (0x0000003C)
-
-
-/* Software Service Register ( 0xFFB0_000C ) */
-
-#define NETARM_GEN_SW_SVC_RESETA (0x123)
-#define NETARM_GEN_SW_SVC_RESETB (0x321)
-
-/* PORT C Register ( 0xFFB0_0028 ) */
-
-#ifndef CONFIG_NETARM_NS7520
-#define NETARM_GEN_PORT_MODE(x) (((x)<<24) + (0xFF00))
-#define NETARM_GEN_PORT_DIR(x) (((x)<<16) + (0xFF00))
-#else
-#define NETARM_GEN_PORT_MODE(x) ((x)<<24)
-#define NETARM_GEN_PORT_DIR(x) ((x)<<16)
-#define NETARM_GEN_PORT_CSF(x) ((x)<<8)
-#endif
-
-/* Timer Registers ( 0xFFB0_0010 0xFFB0_0018 ) */
-
-#define NETARM_GEN_TCTL_ENABLE (0x80000000)
-#define NETARM_GEN_TCTL_INT_ENABLE (0x40000000)
-
-#define NETARM_GEN_TCTL_USE_IRQ (0x00000000)
-#define NETARM_GEN_TCTL_USE_FIQ (0x20000000)
-
-#define NETARM_GEN_TCTL_USE_PRESCALE (0x10000000)
-#define NETARM_GEN_TCTL_INIT_COUNT(x) ((x) & 0x1FF)
-
-#define NETARM_GEN_TSTAT_INTPEN (0x40000000)
-#if ~defined(CONFIG_NETARM_NS7520)
-#define NETARM_GEN_TSTAT_CTC_MASK (0x000001FF)
-#else
-#define NETARM_GEN_TSTAT_CTC_MASK (0x0FFFFFFF)
-#endif
-
-/* prescale to msecs conversion */
-
-#if !defined(CONFIG_NETARM_PLL_BYPASS)
-#define NETARM_GEN_TIMER_MSEC_P(x) ( ( ( 20480 ) * ( 0x1FF - ( (x) & \
- NETARM_GEN_TSTAT_CTC_MASK ) + \
- 1 ) ) / (NETARM_XTAL_FREQ/1000) )
-
-#define NETARM_GEN_TIMER_SET_HZ(x) ( ( ((NETARM_XTAL_FREQ/(20480*(x)))-1) & \
- NETARM_GEN_TSTAT_CTC_MASK ) | \
- NETARM_GEN_TCTL_USE_PRESCALE )
-
-#else
-#define NETARM_GEN_TIMER_MSEC_P(x) ( ( ( 4096 ) * ( 0x1FF - ( (x) & \
- NETARM_GEN_TSTAT_CTC_MASK ) + \
- 1 ) ) / (NETARM_XTAL_FREQ/1000) )
-
-#define NETARM_GEN_TIMER_SET_HZ(x) ( ( ((NETARM_XTAL_FREQ/(4096*(x)))-1) & \
- NETARM_GEN_TSTAT_CTC_MASK ) | \
- NETARM_GEN_TCTL_USE_PRESCALE )
-#endif
-
-#endif
+++ /dev/null
-/*
- * include/asm-armnommu/arch-netarm/netarm_mem_module.h
- *
- * Copyright (C) 2005
- * Art Shipkowski, Videon Central, Inc., <art@videon-central.com>
- *
- * Copyright (C) 2000, 2001 NETsilicon, Inc.
- * Copyright (C) 2000, 2001 Red Hat, Inc.
- *
- * This software is copyrighted by Red Hat. LICENSEE agrees that
- * it will not delete this copyright notice, trademarks or protective
- * notices from any copy made by LICENSEE.
- *
- * This software is provided "AS-IS" and any express or implied
- * warranties or conditions, including but not limited to any
- * implied warranties of merchantability and fitness for a particular
- * purpose regarding this software. In no event shall Red Hat
- * be liable for any indirect, consequential, or incidental damages,
- * loss of profits or revenue, loss of use or data, or interruption
- * of business, whether the alleged damages are labeled in contract,
- * tort, or indemnity.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * author(s) : Joe deBlaquiere
- *
- * Modified to support NS7520 by Art Shipkowski.
- */
-
-#ifndef __NETARM_MEM_MODULE_REGISTERS_H
-#define __NETARM_MEM_MODULE_REGISTERS_H
-
-/* GEN unit register offsets */
-
-#define NETARM_MEM_MODULE_BASE (0xFFC00000)
-
-#define NETARM_MEM_MODULE_CONFIG (0x00)
-#define NETARM_MEM_CS0_BASE_ADDR (0x10)
-#define NETARM_MEM_CS0_OPTIONS (0x14)
-#define NETARM_MEM_CS1_BASE_ADDR (0x20)
-#define NETARM_MEM_CS1_OPTIONS (0x24)
-#define NETARM_MEM_CS2_BASE_ADDR (0x30)
-#define NETARM_MEM_CS2_OPTIONS (0x34)
-#define NETARM_MEM_CS3_BASE_ADDR (0x40)
-#define NETARM_MEM_CS3_OPTIONS (0x44)
-#define NETARM_MEM_CS4_BASE_ADDR (0x50)
-#define NETARM_MEM_CS4_OPTIONS (0x54)
-
-/* select bitfield defintions */
-
-/* Module Configuration Register ( 0xFFC0_0000 ) */
-
-#define NETARM_MEM_CFG_REFR_COUNT_MASK (0xFF000000)
-#define NETARM_MEM_CFG_REFRESH_EN (0x00800000)
-
-#define NETARM_MEM_CFG_REFR_CYCLE_8CLKS (0x00000000)
-#define NETARM_MEM_CFG_REFR_CYCLE_6CLKS (0x00200000)
-#define NETARM_MEM_CFG_REFR_CYCLE_5CLKS (0x00400000)
-#define NETARM_MEM_CFG_REFR_CYCLE_4CLKS (0x00600000)
-
-#define NETARM_MEM_CFG_PORTC_AMUX (0x00100000)
-
-#define NETARM_MEM_CFG_A27_ADDR (0x00080000)
-#define NETARM_MEM_CFG_A27_CS0OE (0x00000000)
-
-#define NETARM_MEM_CFG_A26_ADDR (0x00040000)
-#define NETARM_MEM_CFG_A26_CS0WE (0x00000000)
-
-#define NETARM_MEM_CFG_A25_ADDR (0x00020000)
-#define NETARM_MEM_CFG_A25_BLAST (0x00000000)
-
-#define NETARM_MEM_CFG_PORTC_AMUX2 (0x00010000)
-
-
-/* range on this period is about 1 to 275 usec (with 18.432MHz clock) */
-/* the expression will round down, so make sure to reverse it to verify */
-/* it is what you want. period = [( count + 1 ) * 20] / Fcrystal */
-/* (note: Fxtal = Fcrystal/5, see HWRefGuide sections 8.2.5 and 11.3.2) */
-
-#define NETARM_MEM_REFR_PERIOD_USEC(p) (NETARM_MEM_CFG_REFR_COUNT_MASK & \
- (((((NETARM_XTAL_FREQ/(1000))*p)/(20000) \
- ) - (1) ) << (24)))
-
-#if 0
-/* range on this period is about 1 to 275 usec (with 18.432MHz clock) */
-/* the expression will round down, so make sure to reverse it toverify */
-/* it is what you want. period = [( count + 1 ) * 4] / Fxtal */
-
-#define NETARM_MEM_REFR_PERIOD_USEC(p) (NETARM_MEM_CFG_REFR_COUNT_MASK & \
- (((((NETARM_XTAL_FREQ/(1000))*p)/(4000) \
- ) - (1) ) << (24)))
-#endif
-
-/* Base Address Registers (0xFFC0_00X0) */
-
-#define NETARM_MEM_BAR_BASE_MASK (0xFFFFF000)
-
-/* macro to define base */
-
-#define NETARM_MEM_BAR_BASE(x) ((x) & NETARM_MEM_BAR_BASE_MASK)
-
-#define NETARM_MEM_BAR_DRAM_FP (0x00000000)
-#define NETARM_MEM_BAR_DRAM_EDO (0x00000100)
-#define NETARM_MEM_BAR_DRAM_SYNC (0x00000200)
-
-#define NETARM_MEM_BAR_DRAM_MUX_INT (0x00000000)
-#define NETARM_MEM_BAR_DRAM_MUX_EXT (0x00000080)
-
-#define NETARM_MEM_BAR_DRAM_MUX_BAL (0x00000000)
-#define NETARM_MEM_BAR_DRAM_MUX_UNBAL (0x00000020)
-
-#define NETARM_MEM_BAR_1BCLK_IDLE (0x00000010)
-
-#define NETARM_MEM_BAR_DRAM_SEL (0x00000008)
-
-#define NETARM_MEM_BAR_BURST_EN (0x00000004)
-
-#define NETARM_MEM_BAR_WRT_PROT (0x00000002)
-
-#define NETARM_MEM_BAR_VALID (0x00000001)
-
-/* Option Registers (0xFFC0_00X4) */
-
-/* macro to define which bits of the base are significant */
-
-#define NETARM_MEM_OPT_BASE_USE(x) ((x) & NETARM_MEM_BAR_BASE_MASK)
-
-#define NETARM_MEM_OPT_WAIT_MASK (0x00000F00)
-
-#define NETARM_MEM_OPT_WAIT_STATES(x) (((x) << 8 ) & NETARM_MEM_OPT_WAIT_MASK )
-
-#define NETARM_MEM_OPT_BCYC_1 (0x00000000)
-#define NETARM_MEM_OPT_BCYC_2 (0x00000040)
-#define NETARM_MEM_OPT_BCYC_3 (0x00000080)
-#define NETARM_MEM_OPT_BCYC_4 (0x000000C0)
-
-#define NETARM_MEM_OPT_BSIZE_2 (0x00000000)
-#define NETARM_MEM_OPT_BSIZE_4 (0x00000010)
-#define NETARM_MEM_OPT_BSIZE_8 (0x00000020)
-#define NETARM_MEM_OPT_BSIZE_16 (0x00000030)
-
-#define NETARM_MEM_OPT_32BIT (0x00000000)
-#define NETARM_MEM_OPT_16BIT (0x00000004)
-#define NETARM_MEM_OPT_8BIT (0x00000008)
-#define NETARM_MEM_OPT_32BIT_EXT_ACK (0x0000000C)
-
-#define NETARM_MEM_OPT_BUS_SIZE_MASK (0x0000000C)
-
-#define NETARM_MEM_OPT_READ_ASYNC (0x00000000)
-#define NETARM_MEM_OPT_READ_SYNC (0x00000002)
-
-#define NETARM_MEM_OPT_WRITE_ASYNC (0x00000000)
-#define NETARM_MEM_OPT_WRITE_SYNC (0x00000001)
-
-#ifdef CONFIG_NETARM_NS7520
-/* The NS7520 has a second options register for each chip select */
-#define NETARM_MEM_CS0_OPTIONS_B (0x18)
-#define NETARM_MEM_CS1_OPTIONS_B (0x28)
-#define NETARM_MEM_CS2_OPTIONS_B (0x38)
-#define NETARM_MEM_CS3_OPTIONS_B (0x48)
-#define NETARM_MEM_CS4_OPTIONS_B (0x58)
-
-/* Option B Registers (0xFFC0_00x8) */
-#define NETARM_MEM_OPTB_SYNC_1_STAGE (0x00000001)
-#define NETARM_MEM_OPTB_SYNC_2_STAGE (0x00000002)
-#define NETARM_MEM_OPTB_BCYC_PLUS0 (0x00000000)
-#define NETARM_MEM_OPTB_BCYC_PLUS4 (0x00000004)
-#define NETARM_MEM_OPTB_BCYC_PLUS8 (0x00000008)
-#define NETARM_MEM_OPTB_BCYC_PLUS12 (0x0000000C)
-
-#define NETARM_MEM_OPTB_WAIT_PLUS0 (0x00000000)
-#define NETARM_MEM_OPTB_WAIT_PLUS16 (0x00000010)
-#define NETARM_MEM_OPTB_WAIT_PLUS32 (0x00000020)
-#define NETARM_MEM_OPTB_WAIT_PLUS48 (0x00000030)
-#endif
-
-#endif
+++ /dev/null
-/*
- * linux/include/asm-arm/arch-netarm/netarm_registers.h
- *
- * Copyright (C) 2005
- * Art Shipkowski, Videon Central, Inc., <art@videon-central.com>
- *
- * Copyright (C) 2000, 2001 NETsilicon, Inc.
- * Copyright (C) 2000, 2001 WireSpeed Communications Corporation
- *
- * This software is copyrighted by WireSpeed. LICENSEE agrees that
- * it will not delete this copyright notice, trademarks or protective
- * notices from any copy made by LICENSEE.
- *
- * This software is provided "AS-IS" and any express or implied
- * warranties or conditions, including but not limited to any
- * implied warranties of merchantability and fitness for a particular
- * purpose regarding this software. In no event shall WireSpeed
- * be liable for any indirect, consequential, or incidental damages,
- * loss of profits or revenue, loss of use or data, or interruption
- * of business, whether the alleged damages are labeled in contract,
- * tort, or indemnity.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * author(s) : Joe deBlaquiere
- *
- * Modified to support NS7520 by Art Shipkowski.
- */
-
-#ifndef __NET_ARM_REGISTERS_H
-#define __NET_ARM_REGISTERS_H
-
-#include <config.h>
-
-/* fundamental constants : */
-/* the input crystal/clock frequency ( in Hz ) */
-#define NETARM_XTAL_FREQ_25MHz (18432000)
-#define NETARM_XTAL_FREQ_33MHz (23698000)
-#define NETARM_XTAL_FREQ_48MHz (48000000)
-#define NETARM_XTAL_FREQ_55MHz (55000000)
-#define NETARM_XTAL_FREQ_EMLIN1 (20000000)
-
-/* the frequency of SYS_CLK */
-#if defined(CONFIG_NETARM_EMLIN)
-
-/* EMLIN board: 33 MHz (exp.) */
-#define NETARM_PLL_COUNT_VAL 6
-#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz
-
-#elif defined(CONFIG_NETARM_NET40_REV2)
-
-/* NET+40 Rev2 boards: 33 MHz (with NETARM_XTAL_FREQ_25MHz) */
-#define NETARM_PLL_COUNT_VAL 6
-#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz
-
-#elif defined(CONFIG_NETARM_NET40_REV4)
-
-/* NET+40 Rev4 boards with EDO must clock slower: 25 MHz (with
- NETARM_XTAL_FREQ_25MHz) 4 */
-#define NETARM_PLL_COUNT_VAL 4
-#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz
-
-#elif defined(CONFIG_NETARM_NET50)
-
-/* NET+50 boards: 40 MHz (with NETARM_XTAL_FREQ_25MHz) */
-#define NETARM_PLL_COUNT_VAL 8
-#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz
-
-#else /* CONFIG_NETARM_NS7520 */
-
-#define NETARM_PLL_COUNT_VAL 0
-
-#if defined(CONFIG_BOARD_UNC20)
-#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_48MHz
-#else
-#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_55MHz
-#endif
-
-#endif
-
-/* #include "arm_registers.h" */
-#include <asm/arch/netarm_gen_module.h>
-#include <asm/arch/netarm_mem_module.h>
-#include <asm/arch/netarm_ser_module.h>
-#include <asm/arch/netarm_eni_module.h>
-#include <asm/arch/netarm_dma_module.h>
-#include <asm/arch/netarm_eth_module.h>
-
-#endif
+++ /dev/null
-/*
- * linux/include/asm-arm/arch-netarm/netarm_ser_module.h
- *
- * Copyright (C) 2000 NETsilicon, Inc.
- * Copyright (C) 2000 Red Hat, Inc.
- *
- * This software is copyrighted by Red Hat. LICENSEE agrees that
- * it will not delete this copyright notice, trademarks or protective
- * notices from any copy made by LICENSEE.
- *
- * This software is provided "AS-IS" and any express or implied
- * warranties or conditions, including but not limited to any
- * implied warranties of merchantability and fitness for a particular
- * purpose regarding this software. In no event shall Red Hat
- * be liable for any indirect, consequential, or incidental damages,
- * loss of profits or revenue, loss of use or data, or interruption
- * of business, whether the alleged damages are labeled in contract,
- * tort, or indemnity.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * author(s) : Joe deBlaquiere
- * Clark Williams
- */
-
-#ifndef __NETARM_SER_MODULE_REGISTERS_H
-#define __NETARM_SER_MODULE_REGISTERS_H
-
-#ifndef __ASSEMBLER__
-
-/* (--sub)#include "types.h" */
-
-/* serial channel control structure */
-typedef struct {
- u32 ctrl_a;
- u32 ctrl_b;
- u32 status_a;
- u32 bitrate;
- u32 fifo;
- u32 rx_buf_timer;
- u32 rx_char_timer;
- u32 rx_match;
- u32 rx_match_mask;
- u32 ctrl_c;
- u32 status_b;
- u32 status_c;
- u32 fifo_last;
- u32 unused[3];
-} netarm_serial_channel_t;
-
-#endif
-
-/* SER unit register offsets */
-
-/* #ifdef CONFIG_ARCH_NETARM */
-#define NETARM_SER_MODULE_BASE (0xFFD00000)
-/* #else */
-/* extern serial_channel_t netarm_dummy_registers[]; */
-/* #define NETARM_SER_MODULE_BASE (netarm_dummy_registers) */
-/* #ifndef NETARM_XTAL_FREQ */
-/* #define NETARM_XTAL_FREQ 18432000 */
-/* #endif */
-/* #endif */
-
-/* calculate the sysclk value from the pll setting */
-#define NETARM_PLLED_SYSCLK_FREQ (( NETARM_XTAL_FREQ / 5 ) * \
- ( NETARM_PLL_COUNT_VAL + 3 ))
-
-#define get_serial_channel(c) (&(((netarm_serial_channel_t *)NETARM_SER_MODULE_BASE)[c]))
-
-#define NETARM_SER_CH1_CTRL_A (0x00)
-#define NETARM_SER_CH1_CTRL_B (0x04)
-#define NETARM_SER_CH1_STATUS_A (0x08)
-#define NETARM_SER_CH1_BITRATE (0x0C)
-#define NETARM_SER_CH1_FIFO (0x10)
-#define NETARM_SER_CH1_RX_BUF_TMR (0x14)
-#define NETARM_SER_CH1_RX_CHAR_TMR (0x18)
-#define NETARM_SER_CH1_RX_MATCH (0x1c)
-#define NETARM_SER_CH1_RX_MATCH_MASK (0x20)
-#define NETARM_SER_CH1_CTRL_C (0x24)
-#define NETARM_SER_CH1_STATUS_B (0x28)
-#define NETARM_SER_CH1_STATUS_C (0x2c)
-#define NETARM_SER_CH1_FIFO_LAST (0x30)
-
-#define NETARM_SER_CH2_CTRL_A (0x40)
-#define NETARM_SER_CH2_CTRL_B (0x44)
-#define NETARM_SER_CH2_STATUS_A (0x48)
-#define NETARM_SER_CH2_BITRATE (0x4C)
-#define NETARM_SER_CH2_FIFO (0x50)
-#define NETARM_SER_CH2_RX_BUF_TMR (0x54)
-#define NETARM_SER_CH2_RX_CHAR_TMR (0x58)
-#define NETARM_SER_CH2_RX_MATCH (0x5c)
-#define NETARM_SER_CH2_RX_MATCH_MASK (0x60)
-#define NETARM_SER_CH2_CTRL_C (0x64)
-#define NETARM_SER_CH2_STATUS_B (0x68)
-#define NETARM_SER_CH2_STATUS_C (0x6c)
-#define NETARM_SER_CH2_FIFO_LAST (0x70)
-
-/* select bitfield defintions */
-
-/* Control Register A */
-
-#define NETARM_SER_CTLA_ENABLE (0x80000000)
-#define NETARM_SER_CTLA_BRK (0x40000000)
-
-#define NETARM_SER_CTLA_STICKP (0x20000000)
-
-#define NETARM_SER_CTLA_P_EVEN (0x18000000)
-#define NETARM_SER_CTLA_P_ODD (0x08000000)
-#define NETARM_SER_CTLA_P_NONE (0x00000000)
-
-/* if you read the errata, you will find that the STOP bits don't work right */
-#define NETARM_SER_CTLA_2STOP (0x00000000)
-#define NETARM_SER_CTLA_3STOP (0x04000000)
-
-#define NETARM_SER_CTLA_5BITS (0x00000000)
-#define NETARM_SER_CTLA_6BITS (0x01000000)
-#define NETARM_SER_CTLA_7BITS (0x02000000)
-#define NETARM_SER_CTLA_8BITS (0x03000000)
-
-#define NETARM_SER_CTLA_CTSTX (0x00800000)
-#define NETARM_SER_CTLA_RTSRX (0x00400000)
-
-#define NETARM_SER_CTLA_LOOP_REM (0x00200000)
-#define NETARM_SER_CTLA_LOOP_LOC (0x00100000)
-
-#define NETARM_SER_CTLA_GPIO2 (0x00080000)
-#define NETARM_SER_CTLA_GPIO1 (0x00040000)
-
-#define NETARM_SER_CTLA_DTR_EN (0x00020000)
-#define NETARM_SER_CTLA_RTS_EN (0x00010000)
-
-#define NETARM_SER_CTLA_IE_RX_BRK (0x00008000)
-#define NETARM_SER_CTLA_IE_RX_FRMERR (0x00004000)
-#define NETARM_SER_CTLA_IE_RX_PARERR (0x00002000)
-#define NETARM_SER_CTLA_IE_RX_OVERRUN (0x00001000)
-#define NETARM_SER_CTLA_IE_RX_RDY (0x00000800)
-#define NETARM_SER_CTLA_IE_RX_HALF (0x00000400)
-#define NETARM_SER_CTLA_IE_RX_FULL (0x00000200)
-#define NETARM_SER_CTLA_IE_RX_DMAEN (0x00000100)
-#define NETARM_SER_CTLA_IE_RX_DCD (0x00000080)
-#define NETARM_SER_CTLA_IE_RX_RI (0x00000040)
-#define NETARM_SER_CTLA_IE_RX_DSR (0x00000020)
-
-#define NETARM_SER_CTLA_IE_RX_ALL (NETARM_SER_CTLA_IE_RX_BRK \
- |NETARM_SER_CTLA_IE_RX_FRMERR \
- |NETARM_SER_CTLA_IE_RX_PARERR \
- |NETARM_SER_CTLA_IE_RX_OVERRUN \
- |NETARM_SER_CTLA_IE_RX_RDY \
- |NETARM_SER_CTLA_IE_RX_HALF \
- |NETARM_SER_CTLA_IE_RX_FULL \
- |NETARM_SER_CTLA_IE_RX_DMAEN \
- |NETARM_SER_CTLA_IE_RX_DCD \
- |NETARM_SER_CTLA_IE_RX_RI \
- |NETARM_SER_CTLA_IE_RX_DSR)
-
-#define NETARM_SER_CTLA_IE_TX_CTS (0x00000010)
-#define NETARM_SER_CTLA_IE_TX_EMPTY (0x00000008)
-#define NETARM_SER_CTLA_IE_TX_HALF (0x00000004)
-#define NETARM_SER_CTLA_IE_TX_FULL (0x00000002)
-#define NETARM_SER_CTLA_IE_TX_DMAEN (0x00000001)
-
-#define NETARM_SER_CTLA_IE_TX_ALL (NETARM_SER_CTLA_IE_TX_CTS \
- |NETARM_SER_CTLA_IE_TX_EMPTY \
- |NETARM_SER_CTLA_IE_TX_HALF \
- |NETARM_SER_CTLA_IE_TX_FULL \
- |NETARM_SER_CTLA_IE_TX_DMAEN)
-
-/* Control Register B */
-
-#define NETARM_SER_CTLB_MATCH1_EN (0x80000000)
-#define NETARM_SER_CTLB_MATCH2_EN (0x40000000)
-#define NETARM_SER_CTLB_MATCH3_EN (0x20000000)
-#define NETARM_SER_CTLB_MATCH4_EN (0x10000000)
-
-#define NETARM_SER_CTLB_RBGT_EN (0x08000000)
-#define NETARM_SER_CTLB_RCGT_EN (0x04000000)
-
-#define NETARM_SER_CTLB_UART_MODE (0x00000000)
-#define NETARM_SER_CTLB_HDLC_MODE (0x00100000)
-#define NETARM_SER_CTLB_SPI_MAS_MODE (0x00200000)
-#define NETARM_SER_CTLB_SPI_SLV_MODE (0x00300000)
-
-#define NETARM_SER_CTLB_REV_BIT_ORDER (0x00080000)
-
-#define NETARM_SER_CTLB_MAM1 (0x00040000)
-#define NETARM_SER_CTLB_MAM2 (0x00020000)
-
-/* Status Register A */
-
-#define NETARM_SER_STATA_MATCH1 (0x80000000)
-#define NETARM_SER_STATA_MATCH2 (0x40000000)
-#define NETARM_SER_STATA_MATCH3 (0x20000000)
-#define NETARM_SER_STATA_MATCH4 (0x10000000)
-
-#define NETARM_SER_STATA_BGAP (0x80000000)
-#define NETARM_SER_STATA_CGAP (0x40000000)
-
-#define NETARM_SER_STATA_RX_1B (0x00100000)
-#define NETARM_SER_STATA_RX_2B (0x00200000)
-#define NETARM_SER_STATA_RX_3B (0x00300000)
-#define NETARM_SER_STATA_RX_4B (0x00000000)
-
-/* downshifted values */
-
-#define NETARM_SER_STATA_RXFDB_1BYTES (0x001)
-#define NETARM_SER_STATA_RXFDB_2BYTES (0x002)
-#define NETARM_SER_STATA_RXFDB_3BYTES (0x003)
-#define NETARM_SER_STATA_RXFDB_4BYTES (0x000)
-
-#define NETARM_SER_STATA_RXFDB_MASK (0x00300000)
-#define NETARM_SER_STATA_RXFDB(x) (((x) & NETARM_SER_STATA_RXFDB_MASK) \
- >> 20)
-
-#define NETARM_SER_STATA_DCD (0x00080000)
-#define NETARM_SER_STATA_RI (0x00040000)
-#define NETARM_SER_STATA_DSR (0x00020000)
-#define NETARM_SER_STATA_CTS (0x00010000)
-
-#define NETARM_SER_STATA_RX_BRK (0x00008000)
-#define NETARM_SER_STATA_RX_FRMERR (0x00004000)
-#define NETARM_SER_STATA_RX_PARERR (0x00002000)
-#define NETARM_SER_STATA_RX_OVERRUN (0x00001000)
-#define NETARM_SER_STATA_RX_RDY (0x00000800)
-#define NETARM_SER_STATA_RX_HALF (0x00000400)
-#define NETARM_SER_STATA_RX_CLOSED (0x00000200)
-#define NETARM_SER_STATA_RX_FULL (0x00000100)
-#define NETARM_SER_STATA_RX_DCD (0x00000080)
-#define NETARM_SER_STATA_RX_RI (0x00000040)
-#define NETARM_SER_STATA_RX_DSR (0x00000020)
-
-#define NETARM_SER_STATA_TX_CTS (0x00000010)
-#define NETARM_SER_STATA_TX_RDY (0x00000008)
-#define NETARM_SER_STATA_TX_HALF (0x00000004)
-#define NETARM_SER_STATA_TX_FULL (0x00000002)
-#define NETARM_SER_STATA_TX_DMAEN (0x00000001)
-
-/* you have to clear all receive signals to get the fifo to move forward */
-#define NETARM_SER_STATA_CLR_ALL (NETARM_SER_STATA_RX_BRK | \
- NETARM_SER_STATA_RX_FRMERR | \
- NETARM_SER_STATA_RX_PARERR | \
- NETARM_SER_STATA_RX_OVERRUN | \
- NETARM_SER_STATA_RX_HALF | \
- NETARM_SER_STATA_RX_CLOSED | \
- NETARM_SER_STATA_RX_FULL | \
- NETARM_SER_STATA_RX_DCD | \
- NETARM_SER_STATA_RX_RI | \
- NETARM_SER_STATA_RX_DSR | \
- NETARM_SER_STATA_TX_CTS )
-
-/* Bit Rate Registers */
-
-#define NETARM_SER_BR_EN (0x80000000)
-#define NETARM_SER_BR_TMODE (0x40000000)
-
-#define NETARM_SER_BR_RX_CLK_INT (0x00000000)
-#define NETARM_SER_BR_RX_CLK_EXT (0x20000000)
-#define NETARM_SER_BR_TX_CLK_INT (0x00000000)
-#define NETARM_SER_BR_TX_CLK_EXT (0x10000000)
-
-#define NETARM_SER_BR_RX_CLK_DRV (0x08000000)
-#define NETARM_SER_BR_TX_CLK_DRV (0x04000000)
-
-#define NETARM_SER_BR_CLK_EXT_5 (0x00000000)
-#define NETARM_SER_BR_CLK_SYSTEM (0x01000000)
-#define NETARM_SER_BR_CLK_OUT1A (0x02000000)
-#define NETARM_SER_BR_CLK_OUT2A (0x03000000)
-
-#define NETARM_SER_BR_TX_CLK_INV (0x00800000)
-#define NETARM_SER_BR_RX_CLK_INV (0x00400000)
-
-/* complete settings assuming system clock input is 18MHz */
-
-#define NETARM_SER_BR_MASK (0x000007FF)
-
-/* bit rate determined from equation Fbr = Fxtal / [ 10 * ( N + 1 ) ] */
-/* from section 7.5.4 of HW Ref Guide */
-
-/* #ifdef CONFIG_NETARM_PLL_BYPASS */
-#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \
- NETARM_SER_BR_RX_CLK_INT | \
- NETARM_SER_BR_TX_CLK_INT | \
- NETARM_SER_BR_CLK_EXT_5 | \
- ( ( ( ( NETARM_XTAL_FREQ / \
- ( x * 10 ) ) - 1 ) / 16 ) & \
- NETARM_SER_BR_MASK ) )
-/*
-#else
-#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \
- NETARM_SER_BR_RX_CLK_INT | \
- NETARM_SER_BR_TX_CLK_INT | \
- NETARM_SER_BR_CLK_SYSTEM | \
- ( ( ( ( NETARM_PLLED_SYSCLK_FREQ / \
- ( x * 2 ) ) - 1 ) / 16 ) & \
- NETARM_SER_BR_MASK ) )
-#endif
-*/
-
-/* Receive Buffer Gap Timer */
-
-#define NETARM_SER_RX_GAP_TIMER_EN (0x80000000)
-#define NETARM_SER_RX_GAP_MASK (0x00003FFF)
-
-/* rx gap is a function of bit rate x */
-
-/* #ifdef CONFIG_NETARM_PLL_BYPASS */
-#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
- ( ( ( ( 10 * NETARM_XTAL_FREQ ) / \
- ( x * 5 * 512 ) ) - 1 ) & \
- NETARM_SER_RX_GAP_MASK ) )
-/*
-#else
-#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
- ( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) / \
- ( x * 512 ) ) - 1 ) & \
- NETARM_SER_RX_GAP_MASK ) )
-#endif
-*/
-
-#if 0
-#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
- ( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) / \
- ( x * 5 * 512 ) ) - 1 ) & \
- NETARM_SER_RX_GAP_MASK ) )
-#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
- ( ( ( ( 10 * NETARM_XTAL_FREQ ) / \
- ( x * 512 ) ) - 1 ) & \
- NETARM_SER_RX_GAP_MASK ) )
-#endif
-
-#define MIN_BAUD_RATE 600
-#define MAX_BAUD_RATE 115200
-
-/* the default BAUD rate for the BOOTLOADER, there is a separate */
-/* setting in the serial driver <arch/armnommu/drivers/char/serial-netarm.h> */
-#define DEFAULT_BAUD_RATE 9600
-#define NETARM_SER_FIFO_SIZE 32
-#define MIN_GAP 0
-
-#endif
+++ /dev/null
-#ifndef __LPC2292_REGISTERS_H
-#define __LPC2292_REGISTERS_H
-
-#include <config.h>
-
-/* Macros for reading/writing registers */
-#define PUT8(reg, value) (*(volatile unsigned char*)(reg) = (value))
-#define PUT16(reg, value) (*(volatile unsigned short*)(reg) = (value))
-#define PUT32(reg, value) (*(volatile unsigned int*)(reg) = (value))
-#define GET8(reg) (*(volatile unsigned char*)(reg))
-#define GET16(reg) (*(volatile unsigned short*)(reg))
-#define GET32(reg) (*(volatile unsigned int*)(reg))
-
-/* External Memory Controller */
-
-#define BCFG0 0xFFE00000 /* 32-bits */
-#define BCFG1 0xFFE00004 /* 32-bits */
-#define BCFG2 0xFFE00008 /* 32-bits */
-#define BCFG3 0xFFE0000c /* 32-bits */
-
-/* System Control Block */
-
-#define EXTINT 0xE01FC140
-#define EXTWAKE 0xE01FC144
-#define EXTMODE 0xE01FC148
-#define EXTPOLAR 0xE01FC14C
-#define MEMMAP 0xE01FC040
-#define PLLCON 0xE01FC080
-#define PLLCFG 0xE01FC084
-#define PLLSTAT 0xE01FC088
-#define PLLFEED 0xE01FC08C
-#define PCON 0xE01FC0C0
-#define PCONP 0xE01FC0C4
-#define VPBDIV 0xE01FC100
-
-/* Memory Acceleration Module */
-
-#define MAMCR 0xE01FC000
-#define MAMTIM 0xE01FC004
-
-/* Vectored Interrupt Controller */
-
-#define VICIRQStatus 0xFFFFF000
-#define VICFIQStatus 0xFFFFF004
-#define VICRawIntr 0xFFFFF008
-#define VICIntSelect 0xFFFFF00C
-#define VICIntEnable 0xFFFFF010
-#define VICIntEnClr 0xFFFFF014
-#define VICSoftInt 0xFFFFF018
-#define VICSoftIntClear 0xFFFFF01C
-#define VICProtection 0xFFFFF020
-#define VICVectAddr 0xFFFFF030
-#define VICDefVectAddr 0xFFFFF034
-#define VICVectAddr0 0xFFFFF100
-#define VICVectAddr1 0xFFFFF104
-#define VICVectAddr2 0xFFFFF108
-#define VICVectAddr3 0xFFFFF10C
-#define VICVectAddr4 0xFFFFF110
-#define VICVectAddr5 0xFFFFF114
-#define VICVectAddr6 0xFFFFF118
-#define VICVectAddr7 0xFFFFF11C
-#define VICVectAddr8 0xFFFFF120
-#define VICVectAddr9 0xFFFFF124
-#define VICVectAddr10 0xFFFFF128
-#define VICVectAddr11 0xFFFFF12C
-#define VICVectAddr12 0xFFFFF130
-#define VICVectAddr13 0xFFFFF134
-#define VICVectAddr14 0xFFFFF138
-#define VICVectAddr15 0xFFFFF13C
-#define VICVectCntl0 0xFFFFF200
-#define VICVectCntl1 0xFFFFF204
-#define VICVectCntl2 0xFFFFF208
-#define VICVectCntl3 0xFFFFF20C
-#define VICVectCntl4 0xFFFFF210
-#define VICVectCntl5 0xFFFFF214
-#define VICVectCntl6 0xFFFFF218
-#define VICVectCntl7 0xFFFFF21C
-#define VICVectCntl8 0xFFFFF220
-#define VICVectCntl9 0xFFFFF224
-#define VICVectCntl10 0xFFFFF228
-#define VICVectCntl11 0xFFFFF22C
-#define VICVectCntl12 0xFFFFF230
-#define VICVectCntl13 0xFFFFF234
-#define VICVectCntl14 0xFFFFF238
-#define VICVectCntl15 0xFFFFF23C
-
-/* Pin connect block */
-
-#define PINSEL0 0xE002C000 /* 32 bits */
-#define PINSEL1 0xE002C004 /* 32 bits */
-#define PINSEL2 0xE002C014 /* 32 bits */
-
-/* GPIO */
-
-#define IO0PIN 0xE0028000
-#define IO0SET 0xE0028004
-#define IO0DIR 0xE0028008
-#define IO0CLR 0xE002800C
-#define IO1PIN 0xE0028010
-#define IO1SET 0xE0028014
-#define IO1DIR 0xE0028018
-#define IO1CLR 0xE002801C
-#define IO2PIN 0xE0028020
-#define IO2SET 0xE0028024
-#define IO2DIR 0xE0028028
-#define IO2CLR 0xE002802C
-#define IO3PIN 0xE0028030
-#define IO3SET 0xE0028034
-#define IO3DIR 0xE0028038
-#define IO3CLR 0xE002803C
-
-/* Uarts */
-
-#define U0RBR 0xE000C000
-#define U0THR 0xE000C000
-#define U0IER 0xE000C004
-#define U0IIR 0xE000C008
-#define U0FCR 0xE000C008
-#define U0LCR 0xE000C00C
-#define U0LSR 0xE000C014
-#define U0SCR 0xE000C01C
-#define U0DLL 0xE000C000
-#define U0DLM 0xE000C004
-
-#define U1RBR 0xE0010000
-#define U1THR 0xE0010000
-#define U1IER 0xE0010004
-#define U1IIR 0xE0010008
-#define U1FCR 0xE0010008
-#define U1LCR 0xE001000C
-#define U1MCR 0xE0010010
-#define U1LSR 0xE0010014
-#define U1MSR 0xE0010018
-#define U1SCR 0xE001001C
-#define U1DLL 0xE0010000
-#define U1DLM 0xE0010004
-
-/* I2C */
-
-#define I2CONSET 0xE001C000
-#define I2STAT 0xE001C004
-#define I2DAT 0xE001C008
-#define I2ADR 0xE001C00C
-#define I2SCLH 0xE001C010
-#define I2SCLL 0xE001C014
-#define I2CONCLR 0xE001C018
-
-/* SPI */
-
-#define S0SPCR 0xE0020000
-#define S0SPSR 0xE0020004
-#define S0SPDR 0xE0020008
-#define S0SPCCR 0xE002000C
-#define S0SPINT 0xE002001C
-
-#define S1SPCR 0xE0030000
-#define S1SPSR 0xE0030004
-#define S1SPDR 0xE0030008
-#define S1SPCCR 0xE003000C
-#define S1SPINT 0xE003001C
-
-/* CAN controller */
-
-/* skip for now */
-
-/* Timers */
-
-#define T0IR 0xE0004000
-#define T0TCR 0xE0004004
-#define T0TC 0xE0004008
-#define T0PR 0xE000400C
-#define T0PC 0xE0004010
-#define T0MCR 0xE0004014
-#define T0MR0 0xE0004018
-#define T0MR1 0xE000401C
-#define T0MR2 0xE0004020
-#define T0MR3 0xE0004024
-#define T0CCR 0xE0004028
-#define T0CR0 0xE000402C
-#define T0CR1 0xE0004030
-#define T0CR2 0xE0004034
-#define T0CR3 0xE0004038
-#define T0EMR 0xE000403C
-
-#define T1IR 0xE0008000
-#define T1TCR 0xE0008004
-#define T1TC 0xE0008008
-#define T1PR 0xE000800C
-#define T1PC 0xE0008010
-#define T1MCR 0xE0008014
-#define T1MR0 0xE0008018
-#define T1MR1 0xE000801C
-#define T1MR2 0xE0008020
-#define T1MR3 0xE0008024
-#define T1CCR 0xE0008028
-#define T1CR0 0xE000802C
-#define T1CR1 0xE0008030
-#define T1CR2 0xE0008034
-#define T1CR3 0xE0008038
-#define T1EMR 0xE000803C
-
-/* PWM */
-
-/* skip for now */
-
-/* A/D converter */
-
-/* skip for now */
-
-/* Real Time Clock */
-
-/* skip for now */
-
-/* Watchdog */
-
-#define WDMOD 0xE0000000
-#define WDTC 0xE0000004
-#define WDFEED 0xE0000008
-#define WDTV 0xE000000C
-
-/* EmbeddedICE LOGIC */
-
-/* skip for now */
-
-#endif
+++ /dev/null
-/*
- This file defines the interface to the lpc22xx SPI module.
- Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com)
-
- This file may be included in software not adhering to the GPL.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#ifndef SPI_H
-#define SPI_H
-
-#include <config.h>
-#include <common.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-
-#define SPIF 0x80
-
-#define spi_lock() disable_interrupts();
-#define spi_unlock() enable_interrupts();
-
-extern unsigned long spi_flags;
-extern unsigned char spi_idle;
-
-int spi_init(void);
-
-static inline unsigned char spi_read(void)
-{
- unsigned char b;
-
- PUT8(S0SPDR, spi_idle);
- while (!(GET8(S0SPSR) & SPIF));
- b = GET8(S0SPDR);
-
- return b;
-}
-
-static inline void spi_write(unsigned char b)
-{
- PUT8(S0SPDR, b);
- while (!(GET8(S0SPSR) & SPIF));
- GET8(S0SPDR); /* this will clear the SPIF bit */
-}
-
-static inline void spi_set_clock(unsigned char clk_value)
-{
- PUT8(S0SPCCR, clk_value);
-}
-
-static inline void spi_set_cfg(unsigned char phase,
- unsigned char polarity,
- unsigned char lsbf)
-{
- unsigned char v = 0x20; /* master bit set */
-
- if (phase)
- v |= 0x08; /* set phase bit */
- if (polarity) {
- v |= 0x10; /* set polarity bit */
- spi_idle = 0xFF;
- } else {
- spi_idle = 0x00;
- }
- if (lsbf)
- v |= 0x40; /* set lsbf bit */
-
- PUT8(S0SPCR, v);
-}
-#endif /* SPI_H */
#define PANEL_TIMING_H(bp, fp, sw) (DSS_HBP(bp) | DSS_HFP(fp) | DSS_HSW(sw))
#define PANEL_TIMING_V(bp, fp, sw) (DSS_VBP(bp) | DSS_VFP(fp) | DSS_VSW(sw))
+#define PANEL_LCD_SIZE(xres, yres) ((yres - 1) << 16 | (xres - 1))
/* Generic DSS Functions */
void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
+++ /dev/null
-#ifndef __HW_S3C4510_H
-#define __HW_S3C4510_H
-
-/*
- * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Description: Samsung S3C4510B register layout
- */
-
-/*------------------------------------------------------------------------
- * ASIC Address Definition
- *----------------------------------------------------------------------*/
-
-/* L1 8KB on chip SRAM base address */
-#define SRAM_BASE (0x03fe0000)
-
-/* Special Register Start Address After System Reset */
-#define REG_BASE (0x03ff0000)
-#define SPSTR (REG_BASE)
-
-/* *********************** */
-/* System Manager Register */
-/* *********************** */
-#define REG_SYSCFG (REG_BASE+0x0000)
-
-#define REG_CLKCON (REG_BASE+0x3000)
-#define REG_EXTACON0 (REG_BASE+0x3008)
-#define REG_EXTACON1 (REG_BASE+0x300c)
-#define REG_EXTDBWTH (REG_BASE+0x3010)
-#define REG_ROMCON0 (REG_BASE+0x3014)
-#define REG_ROMCON1 (REG_BASE+0x3018)
-#define REG_ROMCON2 (REG_BASE+0x301c)
-#define REG_ROMCON3 (REG_BASE+0x3020)
-#define REG_ROMCON4 (REG_BASE+0x3024)
-#define REG_ROMCON5 (REG_BASE+0x3028)
-#define REG_DRAMCON0 (REG_BASE+0x302c)
-#define REG_DRAMCON1 (REG_BASE+0x3030)
-#define REG_DRAMCON2 (REG_BASE+0x3034)
-#define REG_DRAMCON3 (REG_BASE+0x3038)
-#define REG_REFEXTCON (REG_BASE+0x303c)
-
-/* *********************** */
-/* Ethernet BDMA Register */
-/* *********************** */
-#define REG_BDMATXCON (REG_BASE+0x9000)
-#define REG_BDMARXCON (REG_BASE+0x9004)
-#define REG_BDMATXPTR (REG_BASE+0x9008)
-#define REG_BDMARXPTR (REG_BASE+0x900c)
-#define REG_BDMARXLSZ (REG_BASE+0x9010)
-#define REG_BDMASTAT (REG_BASE+0x9014)
-
-/* Content Address Memory */
-#define REG_CAM_BASE (REG_BASE+0x9100)
-
-#define REG_BDMATXBUF (REG_BASE+0x9200)
-#define REG_BDMARXBUF (REG_BASE+0x9800)
-
-/* *********************** */
-/* Ethernet MAC Register */
-/* *********************** */
-#define REG_MACCON (REG_BASE+0xa000)
-#define REG_CAMCON (REG_BASE+0xa004)
-#define REG_MACTXCON (REG_BASE+0xa008)
-#define REG_MACTXSTAT (REG_BASE+0xa00c)
-#define REG_MACRXCON (REG_BASE+0xa010)
-#define REG_MACRXSTAT (REG_BASE+0xa014)
-#define REG_STADATA (REG_BASE+0xa018)
-#define REG_STACON (REG_BASE+0xa01c)
-#define REG_CAMEN (REG_BASE+0xa028)
-#define REG_EMISSCNT (REG_BASE+0xa03c)
-#define REG_EPZCNT (REG_BASE+0xa040)
-#define REG_ERMPZCNT (REG_BASE+0xa044)
-#define REG_ETXSTAT (REG_BASE+0x9040)
-#define REG_MACRXDESTR (REG_BASE+0xa064)
-#define REG_MACRXSTATEM (REG_BASE+0xa090)
-#define REG_MACRXFIFO (REG_BASE+0xa200)
-
-/********************/
-/* I2C Bus Register */
-/********************/
-#define REG_I2C_CON (REG_BASE+0xf000)
-#define REG_I2C_BUF (REG_BASE+0xf004)
-#define REG_I2C_PS (REG_BASE+0xf008)
-#define REG_I2C_COUNT (REG_BASE+0xf00c)
-
-/********************/
-/* GDMA 0 */
-/********************/
-#define REG_GDMACON0 (REG_BASE+0xb000)
-#define REG_GDMA0_RUN_ENABLE (REG_BASE+0xb020)
-#define REG_GDMASRC0 (REG_BASE+0xb004)
-#define REG_GDMADST0 (REG_BASE+0xb008)
-#define REG_GDMACNT0 (REG_BASE+0xb00c)
-
-/********************/
-/* GDMA 1 */
-/********************/
-#define REG_GDMACON1 (REG_BASE+0xc000)
-#define REG_GDMA1_RUN_ENABLE (REG_BASE+0xc020)
-#define REG_GDMASRC1 (REG_BASE+0xc004)
-#define REG_GDMADST1 (REG_BASE+0xc008)
-#define REG_GDMACNT1 (REG_BASE+0xc00c)
-
-/********************/
-/* UART 0 */
-/********************/
-#define UART0_BASE (REG_BASE+0xd000)
-#define REG_UART0_LCON (REG_BASE+0xd000)
-#define REG_UART0_CTRL (REG_BASE+0xd004)
-#define REG_UART0_STAT (REG_BASE+0xd008)
-#define REG_UART0_TXB (REG_BASE+0xd00c)
-#define REG_UART0_RXB (REG_BASE+0xd010)
-#define REG_UART0_BAUD_DIV (REG_BASE+0xd014)
-#define REG_UART0_BAUD_CNT (REG_BASE+0xd018)
-#define REG_UART0_BAUD_CLK (REG_BASE+0xd01C)
-
-/********************/
-/* UART 1 */
-/********************/
-#define UART1_BASE (REG_BASE+0xe000)
-#define REG_UART1_LCON (REG_BASE+0xe000)
-#define REG_UART1_CTRL (REG_BASE+0xe004)
-#define REG_UART1_STAT (REG_BASE+0xe008)
-#define REG_UART1_TXB (REG_BASE+0xe00c)
-#define REG_UART1_RXB (REG_BASE+0xe010)
-#define REG_UART1_BAUD_DIV (REG_BASE+0xe014)
-#define REG_UART1_BAUD_CNT (REG_BASE+0xe018)
-#define REG_UART1_BAUD_CLK (REG_BASE+0xe01C)
-
-/********************/
-/* Timer Register */
-/********************/
-#define REG_TMOD (REG_BASE+0x6000)
-#define REG_TDATA0 (REG_BASE+0x6004)
-#define REG_TDATA1 (REG_BASE+0x6008)
-#define REG_TCNT0 (REG_BASE+0x600c)
-#define REG_TCNT1 (REG_BASE+0x6010)
-
-/**********************/
-/* I/O Port Interface */
-/**********************/
-#define REG_IOPMODE (REG_BASE+0x5000)
-#define REG_IOPCON (REG_BASE+0x5004)
-#define REG_IOPDATA (REG_BASE+0x5008)
-
-/*********************************/
-/* Interrupt Controller Register */
-/*********************************/
-#define REG_INTMODE (REG_BASE+0x4000)
-#define REG_INTPEND (REG_BASE+0x4004)
-#define REG_INTMASK (REG_BASE+0x4008)
-
-#define REG_INTPRI0 (REG_BASE+0x400c)
-#define REG_INTPRI1 (REG_BASE+0x4010)
-#define REG_INTPRI2 (REG_BASE+0x4014)
-#define REG_INTPRI3 (REG_BASE+0x4018)
-#define REG_INTPRI4 (REG_BASE+0x401c)
-#define REG_INTPRI5 (REG_BASE+0x4020)
-#define REG_INTOFFSET (REG_BASE+0x4024)
-#define REG_INTPNDPRI (REG_BASE+0x4028)
-#define REG_INTPNDTST (REG_BASE+0x402C)
-
-/*********************************/
-/* CACHE CONTROL MASKS */
-/*********************************/
-#define CACHE_STALL (0x00000001)
-#define CACHE_ENABLE (0x00000002)
-#define CACHE_WRITE_BUFF (0x00000004)
-#define CACHE_MODE (0x00000030)
-#define CACHE_MODE_00 (0x00000000)
-#define CACHE_MODE_01 (0x00000010)
-#define CACHE_MODE_10 (0x00000020)
-
-/*********************************/
-/* CACHE RAM BASE ADDRESSES */
-/*********************************/
-#define CACHE_SET0_RAM (0x10000000)
-#define CACHE_SET1_RAM (0x10800000)
-#define CACHE_TAG_RAM (0x11000000)
-
-/*********************************/
-/* CACHE_DISABLE MASK */
-/*********************************/
-#define CACHE_DISABLE_MASK (0x04000000)
-
-#define GET_REG(reg) (*((volatile u32 *)(reg)))
-#define PUT_REG(reg, val) (*((volatile u32 *)(reg)) = ((u32)(val)))
-#define SET_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) | mask))
-#define CLR_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) & ~mask))
-#define PUT_U16(reg, val) (*((volatile u16 *)(reg)) = ((u16)(val)))
-#define PUT__U8(reg, val) (*((volatile u8 *)(reg)) = (( u8)((val)&0xFF)))
-#define GET__U8(reg) (*((volatile u8 *)(reg)))
-
-#define PUT_LED(val) (PUT_REG(REG_IOPDATA, (~val)&0xFF))
-#define GET_LED() ((~GET_REG( REG_IOPDATA)) & 0xFF)
-#define SET_LED(val) { u32 led = GET_LED(); led |= 1 << (val); PUT_LED( led); }
-#define CLR_LED(val) { u32 led = GET_LED(); led &= ~(1 << (val)); PUT_LED( led); }
-
-/***********************************/
-/* CLOCK CONSTANTS -- 50 MHz Clock */
-/***********************************/
-
-#define CLK_FREQ_MHZ (50)
-#define t_data_us(t) ((t)*CLK_FREQ_MHZ-1) /* t is time tick,unit[us] */
-#define t_data_ms(t) (t_data_us((t)*1000)) /* t is time tick,unit[ms] */
-
-/*********************************************************/
-/* TIMER MODE REGISTER */
-/*********************************************************/
-#define TM0_RUN 0x01 /* Timer 0 enable */
-#define TM0_TOGGLE 0x02 /* 0, interval mode */
-#define TM0_OUT_1 0x04 /* Timer 0 Initial TOUT0 value */
-#define TM1_RUN 0x08 /* Timer 1 enable */
-#define TM1_TOGGLE 0x10 /* 0, interval mode */
-#define TM1_OUT_1 0x20 /* Timer 0 Initial TOUT0 value */
-
-
-/*********************************/
-/* INTERRUPT SOURCES */
-/*********************************/
-#define INT_EXTINT0 0
-#define INT_EXTINT1 1
-#define INT_EXTINT2 2
-#define INT_EXTINT3 3
-#define INT_UARTTX0 4
-#define INT_UARTRX0 5
-#define INT_UARTTX1 6
-#define INT_UARTRX1 7
-#define INT_GDMA0 8
-#define INT_GDMA1 9
-#define INT_TIMER0 10
-#define INT_TIMER1 11
-#define INT_HDLCTXA 12
-#define INT_HDLCRXA 13
-#define INT_HDLCTXB 14
-#define INT_HDLCRXB 15
-#define INT_BDMATX 16
-#define INT_BDMARX 17
-#define INT_MACTX 18
-#define INT_MACRX 19
-#define INT_IIC 20
-#define INT_GLOBAL 21
-#define N_IRQS (21)
-
-#ifndef __ASSEMBLER__
-struct _irq_handler {
- void *m_data;
- void (*m_func)( void *data);
-};
-
-#endif
-
-#endif /* __S3C4510_h */
--- /dev/null
+/*
+ * (C) Copyright 2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _ASM_ARCH_SPL_H_
+#define _ASM_ARCH_SPL_H_
+
+#define BOOT_DEVICE_RAM 1
+
+#endif
typedef struct global_data {
bd_t *bd;
unsigned long flags;
- unsigned long baudrate;
+ unsigned int baudrate;
unsigned long have_console; /* serial_init() was called */
#ifdef CONFIG_PRE_CONSOLE_BUFFER
unsigned long precon_buf_idx; /* Pre-Console buffer index */
extern struct meminfo meminfo;
#endif
+
+/*
+ * Board specified tags
+ */
+void setup_board_tags(struct tag **in_params);
#define _U_BOOT_H_ 1
typedef struct bd_info {
- int bi_baudrate; /* serial console baudrate */
+ unsigned int bi_baudrate; /* serial console baudrate */
ulong bi_arch_number; /* unique id for this board */
ulong bi_boot_params; /* where this board expects params */
unsigned long bi_arm_freq; /* arm frequency */
#include <miiphy.h>
#endif
-#ifdef CONFIG_DRIVER_SMC91111
-#include "../drivers/net/smc91111.h"
-#endif
-#ifdef CONFIG_DRIVER_LAN91C96
-#include "../drivers/net/lan91c96.h"
-#endif
-
DECLARE_GLOBAL_DATA_PTR;
ulong monitor_flash_len;
#ifdef CONFIG_PRAM
ulong reg;
#endif
+ void *new_fdt = NULL;
+ size_t fdt_size = 0;
bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f");
debug("Reserving %zu Bytes for Global Data at: %08lx\n",
sizeof (gd_t), addr_sp);
+#if defined(CONFIG_OF_SEPARATE) && defined(CONFIG_OF_CONTROL)
+ /*
+ * If the device tree is sitting immediate above our image then we
+ * must relocate it. If it is embedded in the data section, then it
+ * will be relocated with other data.
+ */
+ if (gd->fdt_blob) {
+ fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32);
+
+ addr_sp -= fdt_size;
+ new_fdt = (void *)addr_sp;
+ debug("Reserving %zu Bytes for FDT at: %08lx\n",
+ fdt_size, addr_sp);
+ }
+#endif
+
/* setup stackpointer for exeptions */
gd->irq_sp = addr_sp;
#ifdef CONFIG_USE_IRQ
gd->start_addr_sp = addr_sp;
gd->reloc_off = addr - _TEXT_BASE;
debug("relocation Offset is: %08lx\n", gd->reloc_off);
+ if (new_fdt) {
+ memcpy(new_fdt, gd->fdt_blob, fdt_size);
+ gd->fdt_blob = new_fdt;
+ }
memcpy(id, (void *)gd, sizeof(gd_t));
relocate_code(addr_sp, id, addr);
/* enable exceptions */
enable_interrupts();
- /* Perform network card initialisation if necessary */
-#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
- /* XXX: this needs to be moved to board init */
- if (getenv("ethaddr")) {
- uchar enetaddr[6];
- eth_getenv_enetaddr("ethaddr", enetaddr);
- smc_set_mac_addr(enetaddr);
- }
-#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
-
/* Initialize from environment */
load_addr = getenv_ulong("loadaddr", 16, load_addr);
#include <libfdt.h>
#include <fdt_support.h>
#include <asm/bootm.h>
+#include <linux/compiler.h>
DECLARE_GLOBAL_DATA_PTR;
}
#endif
+__weak void setup_board_tags(struct tag **in_params) {}
+
/* Subcommand: PREP */
static void boot_prep_linux(bootm_headers_t *images)
{
setup_initrd_tag(gd->bd, images->rd_start,
images->rd_end);
#endif
+ setup_board_tags(¶ms);
setup_end_tag(gd->bd);
#else /* all tags */
printf("FDT and ATAGS support not compiled in - hanging\n");
}
. = ALIGN(4);
- __u_boot_cmd_start = .;
- .u_boot_cmd : {
- KEEP(*(.u_boot_cmd))
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
}
- __u_boot_cmd_end = .;
. = ALIGN(4);
_got = .;
typedef struct global_data {
bd_t *bd;
unsigned long flags;
- unsigned long baudrate;
+ unsigned int baudrate;
unsigned long stack_end; /* highest stack address */
unsigned long have_console; /* serial_init() was called */
#ifdef CONFIG_PRE_CONSOLE_BUFFER
#define __ASM_U_BOOT_H__ 1
typedef struct bd_info {
- unsigned long bi_baudrate;
+ unsigned int bi_baudrate;
unsigned char bi_phy_id[4];
unsigned long bi_board_number;
void *bi_boot_params;
/*
* We have to relocate the command table manually
*/
- fixup_cmdtable(&__u_boot_cmd_start,
- (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
+ fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+ ll_entry_count(cmd_tbl_t, cmd));
#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
/* there are some other pointer constants we must deal with */
CONSTRUCTORS
} >ram_data
- .u_boot_cmd :
- {
- ___u_boot_cmd_start = .;
- *(.u_boot_cmd)
- ___u_boot_cmd_end = .;
+
+ .u_boot_list : {
+ #include <u-boot.lst>
} >ram_data
.text_l1 :
bd_t *bd;
unsigned long flags;
unsigned long board_type;
- unsigned long baudrate;
+ unsigned int baudrate;
unsigned long have_console; /* serial_init() was called */
#ifdef CONFIG_PRE_CONSOLE_BUFFER
unsigned long precon_buf_idx; /* Pre-Console buffer index */
#define _U_BOOT_H_ 1
typedef struct bd_info {
- int bi_baudrate; /* serial console baudrate */
+ unsigned int bi_baudrate; /* serial console baudrate */
unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_memstart; /* start of DRAM memory */
phys_size_t bi_memsize; /* size of DRAM memory in bytes */
printf(" gd: %p\n", gd);
printf(" |-flags: %lx\n", gd->flags);
printf(" |-board_type: %lx\n", gd->board_type);
- printf(" |-baudrate: %lu\n", gd->baudrate);
+ printf(" |-baudrate: %u\n", gd->baudrate);
printf(" |-have_console: %lx\n", gd->have_console);
printf(" |-ram_size: %lx\n", gd->ram_size);
printf(" |-env_addr: %lx\n", gd->env_addr);
#include <asm/immap.h>
#include <asm/io.h>
#include <asm/rtc.h>
+#include <linux/compiler.h>
/*
* Breath some life into the CPU...
*/
void cpu_init_f(void)
{
- scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
- fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
- pll_t *pll = (pll_t *)MMAP_PLL;
+ fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS;
#if !defined(CONFIG_CF_SBF)
+ scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
+ pll_t *pll = (pll_t *)MMAP_PLL;
+
/* Workaround, must place before fbcs */
out_be32(&pll->psr, 0x12);
/* exception code */
.globl _fault
_fault:
- jmp _fault
+ bra _fault
.globl _exc_handler
_exc_handler:
/* exception code */
.globl _fault
_fault:
- jmp _fault
+ bra _fault
.globl _exc_handler
_exc_handler:
/* exception code */
.globl _fault
_fault:
- jmp _fault
+ bra _fault
.globl _exc_handler
_exc_handler:
/* exception code */
.globl _fault
_fault:
- jmp _fault
+ bra _fault
.globl _exc_handler
_exc_handler:
# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# Copyright 2011-2012 Freescale Semiconductor, Inc.
+#
# See file CREDITS for list of people who contributed to this
# project.
#
#
PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+
+cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is5441x:=$(shell grep CONFIG_MCF5441x $(TOPDIR)/include/$(cfg))
+
+ifneq (,$(findstring CONFIG_MCF5441x,$(is5441x)))
+PLATFORM_CPPFLAGS += -mcpu=54418 -fPIC
+else
PLATFORM_CPPFLAGS += -mcpu=54455 -fPIC
+endif
ifneq (,$(findstring -linux-,$(shell $(CC) --version)))
ifneq (,$(findstring GOT,$(shell $(LD) --help)))
{
rcm_t *rcm = (rcm_t *) (MMAP_RCM);
udelay(1000);
+ out_8(&rcm->rcr, RCM_RCR_FRCRSTOUT);
+ udelay(10000);
setbits_8(&rcm->rcr, RCM_RCR_SOFTRST);
/* we don't return! */
case 0x4f:
id = 54450;
break;
+ case 0x9F:
+ id = 54410;
+ break;
+ case 0xA0:
+ id = 54415;
+ break;
+ case 0xA1:
+ id = 54416;
+ break;
+ case 0xA2:
+ id = 54417;
+ break;
+ case 0xA3:
+ id = 54418;
+ break;
}
if (id) {
#include <asm/processor.h>
#include <asm/rtc.h>
#include <asm/io.h>
+#include <linux/compiler.h>
#if defined(CONFIG_CMD_NET)
#include <config.h>
#include <asm/fec.h>
#endif
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f(void)
+void init_fbcs(void)
{
- scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
- fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
-
- out_be32(&scm1->mpr, 0x77777777);
- out_be32(&scm1->pacra, 0);
- out_be32(&scm1->pacrb, 0);
- out_be32(&scm1->pacrc, 0);
- out_be32(&scm1->pacrd, 0);
- out_be32(&scm1->pacre, 0);
- out_be32(&scm1->pacrf, 0);
- out_be32(&scm1->pacrg, 0);
+ fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS;
- /* FlexBus */
- out_8(&gpio->par_be,
- GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 |
- GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0);
- out_8(&gpio->par_fbctl,
- GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA |
- GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS);
-
-#if !defined(CONFIG_CF_SBF)
+#if !defined(CONFIG_SERIAL_BOOT)
#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE);
out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL);
out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL);
out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
#endif
+}
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f(void)
+{
+ gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+#ifdef CONFIG_MCF5441x
+ scm_t *scm = (scm_t *) MMAP_SCM;
+ pm_t *pm = (pm_t *) MMAP_PM;
+
+ /* Disable Switch */
+ *(unsigned long *)(MMAP_L2_SW0 + 0x00000024) = 0;
+
+ /* Disable core watchdog */
+ out_be16(&scm->cwcr, 0);
+ out_8(&gpio->par_fbctl,
+ GPIO_PAR_FBCTL_ALE_FB_ALE | GPIO_PAR_FBCTL_OE_FB_OE |
+ GPIO_PAR_FBCTL_FBCLK | GPIO_PAR_FBCTL_RW |
+ GPIO_PAR_FBCTL_TA_TA);
+ out_8(&gpio->par_be,
+ GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 |
+ GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0);
+
+ /* eDMA */
+ out_8(&pm->pmcr0, 17);
+
+ /* INTR0 - INTR2 */
+ out_8(&pm->pmcr0, 18);
+ out_8(&pm->pmcr0, 19);
+ out_8(&pm->pmcr0, 20);
+
+ /* I2C */
+ out_8(&pm->pmcr0, 22);
+ out_8(&pm->pmcr1, 4);
+ out_8(&pm->pmcr1, 7);
+
+ /* DTMR0 - DTMR3*/
+ out_8(&pm->pmcr0, 28);
+ out_8(&pm->pmcr0, 29);
+ out_8(&pm->pmcr0, 30);
+ out_8(&pm->pmcr0, 31);
+
+ /* PIT0 - PIT3 */
+ out_8(&pm->pmcr0, 32);
+ out_8(&pm->pmcr0, 33);
+ out_8(&pm->pmcr0, 34);
+ out_8(&pm->pmcr0, 35);
+
+ /* Edge Port */
+ out_8(&pm->pmcr0, 36);
+ out_8(&pm->pmcr0, 37);
+
+ /* USB OTG */
+ out_8(&pm->pmcr0, 44);
+ /* USB Host */
+ out_8(&pm->pmcr0, 45);
+
+ /* ESDHC */
+ out_8(&pm->pmcr0, 51);
+
+ /* ENET0 - ENET1 */
+ out_8(&pm->pmcr0, 53);
+ out_8(&pm->pmcr0, 54);
+
+ /* NAND */
+ out_8(&pm->pmcr0, 63);
+
+#ifdef CONFIG_SYS_I2C_0
+ out_8(&gpio->par_cani2c, 0xF0);
+ /* I2C0 pull up */
+ out_be16(&gpio->pcr_b, 0x003C);
+ /* I2C0 max speed */
+ out_8(&gpio->srcr_cani2c, 0x03);
+#endif
+#ifdef CONFIG_SYS_I2C_2
+ /* I2C2 */
+ out_8(&gpio->par_ssi0h, 0xA0);
+ /* I2C2, UART7 */
+ out_8(&gpio->par_ssi0h, 0xA8);
+ /* UART7 */
+ out_8(&gpio->par_ssi0l, 0x2);
+ /* UART8, UART9 */
+ out_8(&gpio->par_cani2c, 0xAA);
+ /* UART4, UART0 */
+ out_8(&gpio->par_uart0, 0xAF);
+ /* UART5, UART1 */
+ out_8(&gpio->par_uart1, 0xAF);
+ /* UART6, UART2 */
+ out_8(&gpio->par_uart2, 0xAF);
+ /* I2C2 pull up */
+ out_be16(&gpio->pcr_h, 0xF000);
+#endif
+#ifdef CONFIG_SYS_I2C_5
+ /* I2C5 */
+ out_8(&gpio->par_uart1, 0x0A);
+ /* I2C5 pull up */
+ out_be16(&gpio->pcr_e, 0x0003);
+ out_be16(&gpio->pcr_f, 0xC000);
+#endif
+
+ /* Lowest slew rate for UART0,1,2 */
+ out_8(&gpio->srcr_uart, 0x00);
+#endif /* CONFIG_MCF5441x */
+
+#ifdef CONFIG_MCF5445x
+ scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
+
+ out_be32(&scm1->mpr, 0x77777777);
+ out_be32(&scm1->pacra, 0);
+ out_be32(&scm1->pacrb, 0);
+ out_be32(&scm1->pacrc, 0);
+ out_be32(&scm1->pacrd, 0);
+ out_be32(&scm1->pacre, 0);
+ out_be32(&scm1->pacrf, 0);
+ out_be32(&scm1->pacrg, 0);
+
+ /* FlexBus */
+ out_8(&gpio->par_be,
+ GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 |
+ GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0);
+ out_8(&gpio->par_fbctl,
+ GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA |
+ GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS);
+
+#ifdef CONFIG_FSL_I2C
+ out_be16(&gpio->par_feci2c,
+ GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
+#endif
+#endif /* CONFIG_MCF5445x */
+
+ /* FlexBus Chipselect */
+ init_fbcs();
/*
* now the flash base address is no longer at 0 (Newer ColdFire family
if (CONFIG_SYS_CS0_BASE != 0)
setvbr(CONFIG_SYS_CS0_BASE);
-#ifdef CONFIG_FSL_I2C
- out_be16(&gpio->par_feci2c,
- GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
-#endif
-
icache_enable();
}
void uart_port_conf(int port)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+#ifdef CONFIG_MCF5441x
+ pm_t *pm = (pm_t *) MMAP_PM;
+#endif
/* Setup Ports: */
switch (port) {
+#ifdef CONFIG_MCF5441x
+ case 0:
+ /* UART0 */
+ out_8(&pm->pmcr0, 24);
+ clrbits_8(&gpio->par_uart0,
+ ~(GPIO_PAR_UART0_U0RXD_MASK | GPIO_PAR_UART0_U0TXD_MASK));
+ setbits_8(&gpio->par_uart0,
+ GPIO_PAR_UART0_U0RXD_U0RXD | GPIO_PAR_UART0_U0TXD_U0TXD);
+ break;
+ case 1:
+ /* UART1 */
+ out_8(&pm->pmcr0, 25);
+ clrbits_8(&gpio->par_uart1,
+ ~(GPIO_PAR_UART1_U1RXD_MASK | GPIO_PAR_UART1_U1TXD_MASK));
+ setbits_8(&gpio->par_uart1,
+ GPIO_PAR_UART1_U1RXD_U1RXD | GPIO_PAR_UART1_U1TXD_U1TXD);
+ break;
+ case 2:
+ /* UART2 */
+ out_8(&pm->pmcr0, 26);
+ clrbits_8(&gpio->par_uart2,
+ ~(GPIO_PAR_UART2_U2RXD_MASK | GPIO_PAR_UART2_U2TXD_MASK));
+ setbits_8(&gpio->par_uart2,
+ GPIO_PAR_UART2_U2RXD_U2RXD | GPIO_PAR_UART2_U2TXD_U2TXD);
+ break;
+ case 3:
+ /* UART3 */
+ out_8(&pm->pmcr0, 27);
+ clrbits_8(&gpio->par_dspi0,
+ ~(GPIO_PAR_DSPI0_SIN_MASK | GPIO_PAR_DSPI0_SOUT_MASK));
+ setbits_8(&gpio->par_dspi0,
+ GPIO_PAR_DSPI0_SIN_U3RXD | GPIO_PAR_DSPI0_SOUT_U3TXD);
+ break;
+ case 4:
+ /* UART4 */
+ out_8(&pm->pmcr1, 24);
+ clrbits_8(&gpio->par_uart0,
+ ~(GPIO_PAR_UART0_U0CTS_MASK | GPIO_PAR_UART0_U0RTS_MASK));
+ setbits_8(&gpio->par_uart0,
+ GPIO_PAR_UART0_U0CTS_U4TXD | GPIO_PAR_UART0_U0RTS_U4RXD);
+ break;
+ case 5:
+ /* UART5 */
+ out_8(&pm->pmcr1, 25);
+ clrbits_8(&gpio->par_uart1,
+ ~(GPIO_PAR_UART1_U1CTS_MASK | GPIO_PAR_UART1_U1RTS_MASK));
+ setbits_8(&gpio->par_uart1,
+ GPIO_PAR_UART1_U1CTS_U5TXD | GPIO_PAR_UART1_U1RTS_U5RXD);
+ break;
+ case 6:
+ /* UART6 */
+ out_8(&pm->pmcr1, 26);
+ clrbits_8(&gpio->par_uart2,
+ ~(GPIO_PAR_UART2_U2CTS_MASK | GPIO_PAR_UART2_U2RTS_MASK));
+ setbits_8(&gpio->par_uart2,
+ GPIO_PAR_UART2_U2CTS_U6TXD | GPIO_PAR_UART2_U2RTS_U6RXD);
+ break;
+ case 7:
+ /* UART7 */
+ out_8(&pm->pmcr1, 27);
+ clrbits_8(&gpio->par_ssi0h, ~GPIO_PAR_SSI0H_RXD_MASK);
+ clrbits_8(&gpio->par_ssi0l, ~GPIO_PAR_SSI0L_BCLK_MASK);
+ setbits_8(&gpio->par_ssi0h, GPIO_PAR_SSI0H_FS_U7TXD);
+ setbits_8(&gpio->par_ssi0l, GPIO_PAR_SSI0L_BCLK_U7RXD);
+ break;
+ case 8:
+ /* UART8 */
+ out_8(&pm->pmcr0, 28);
+ clrbits_8(&gpio->par_cani2c,
+ ~(GPIO_PAR_CANI2C_I2C0SCL_MASK | GPIO_PAR_CANI2C_I2C0SDA_MASK));
+ setbits_8(&gpio->par_cani2c,
+ GPIO_PAR_CANI2C_I2C0SCL_U8TXD | GPIO_PAR_CANI2C_I2C0SDA_U8RXD);
+ break;
+ case 9:
+ /* UART9 */
+ out_8(&pm->pmcr1, 29);
+ clrbits_8(&gpio->par_cani2c,
+ ~(GPIO_PAR_CANI2C_CAN1TX_MASK | GPIO_PAR_CANI2C_CAN1RX_MASK));
+ setbits_8(&gpio->par_cani2c,
+ GPIO_PAR_CANI2C_CAN1TX_U9TXD | GPIO_PAR_CANI2C_CAN1RX_U9RXD);
+ break;
+#endif
+#ifdef CONFIG_MCF5445x
case 0:
clrbits_8(&gpio->par_uart,
GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD);
#endif
break;
+#endif /* CONFIG_MCF5445x */
}
}
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
struct fec_info_s *info = (struct fec_info_s *)dev->priv;
+#ifdef CONFIG_MCF5445x
if (setclear) {
#ifdef CONFIG_SYS_FEC_NO_SHARED_PHY
if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
#endif
}
}
+#endif /* CONFIG_MCF5445x */
+
+#ifdef CONFIG_MCF5441x
+ if (setclear) {
+ out_8(&gpio->par_fec, 0x03);
+ out_8(&gpio->srcr_fec, 0x0F);
+ clrsetbits_8(&gpio->par_simp0h, ~GPIO_PAR_SIMP0H_DAT_MASK,
+ GPIO_PAR_SIMP0H_DAT_GPIO);
+ clrsetbits_8(&gpio->pddr_g, ~GPIO_PDDR_G4_MASK,
+ GPIO_PDDR_G4_OUTPUT);
+ clrbits_8(&gpio->podr_g, ~GPIO_PODR_G4_MASK);
+
+ } else
+ clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC_MASK);
+#endif
return 0;
}
#endif
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+#ifdef CONFIG_MCF5445x
out_8(&gpio->par_dspi,
GPIO_PAR_DSPI_SIN_SIN |
GPIO_PAR_DSPI_SOUT_SOUT |
GPIO_PAR_DSPI_SCK_SCK);
+#endif
+
+#ifdef CONFIG_MCF5441x
+ pm_t *pm = (pm_t *) MMAP_PM;
+
+ out_8(&gpio->par_dspi0,
+ GPIO_PAR_DSPI0_SIN_DSPI0SIN | GPIO_PAR_DSPI0_SOUT_DSPI0SOUT |
+ GPIO_PAR_DSPI0_SCK_DSPI0SCK);
+ out_8(&gpio->srcr_dspiow, 3);
+
+ /* DSPI0 */
+ out_8(&pm->pmcr0, 23);
+#endif
}
int cfspi_claim_bus(uint bus, uint cs)
/* Clear FIFO and resume transfer */
clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
+#ifdef CONFIG_MCF5445x
switch (cs) {
case 0:
clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
break;
}
+#endif
+
+#ifdef CONFIG_MCF5441x
+ switch (cs) {
+ case 0:
+ clrbits_8(&gpio->par_dspi0, ~GPIO_PAR_DSPI0_PCS0_MASK);
+ setbits_8(&gpio->par_dspi0, GPIO_PAR_DSPI0_PCS0_DSPI0PCS0);
+ break;
+ case 1:
+ clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
+ setbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
+ break;
+ }
+#endif
return 0;
}
/* Clear FIFO */
clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
+#ifdef CONFIG_MCF5445x
switch (cs) {
case 0:
clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
break;
}
+#endif
+
+#ifdef CONFIG_MCF5441x
+ if (cs == 1)
+ clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
+#endif
}
#endif
/* Round divider down to nearest power of two */
for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ;
+#ifdef CONFIG_MCF5445x
/* Apply the divider to the system clock */
clrsetbits_be16(&ccm->cdr, 0x0f00, CCM_CDR_LPDIV(i));
+#endif
/* Enable Limp Mode */
setbits_be16(&ccm->misccr, CCM_MISCCR_LIMP);
;
}
-/*
- * get_clocks() fills in gd->cpu_clock and gd->bus_clk
- */
-int get_clocks(void)
+#ifdef CONFIG_MCF5441x
+void setup_5441x_clocks(void)
{
+ ccm_t *ccm = (ccm_t *)MMAP_CCM;
+ pll_t *pll = (pll_t *)MMAP_PLL;
+ int temp, vco = 0, bootmod_ccr, pdr;
+
+ bootmod_ccr = (in_be16(&ccm->ccr) & CCM_CCR_BOOTMOD) >> 14;
+
+ switch (bootmod_ccr) {
+ case 0:
+ out_be32(&pll->pcr, 0x00000013);
+ out_be32(&pll->pdr, 0x00e70c61);
+ clock_exit_limp();
+ break;
+ case 2:
+ break;
+ case 3:
+ break;
+ }
+
+ /*Change frequency for Modelo SER1 USB host*/
+#ifdef CONFIG_LOW_MCFCLK
+ temp = in_be32(&pll->pcr);
+ temp &= ~0x3f;
+ temp |= 5;
+ out_be32(&pll->pcr, temp);
+
+ temp = in_be32(&pll->pdr);
+ temp &= ~0x001f0000;
+ temp |= 0x00040000;
+ out_be32(&pll->pdr, temp);
+ __asm__("tpf");
+#endif
+ setbits_be16(&ccm->misccr2, 0x02);
+
+ vco = ((in_be32(&pll->pcr) & PLL_CR_FBKDIV_BITS) + 1) *
+ CONFIG_SYS_INPUT_CLKSRC;
+ gd->vco_clk = vco;
+
+ gd->inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */
+
+ pdr = in_be32(&pll->pdr);
+ temp = (pdr & PLL_DR_OUTDIV1_BITS) + 1;
+ gd->cpu_clk = vco / temp; /* cpu clock */
+ gd->flb_clk = vco / temp; /* FlexBus clock */
+ gd->flb_clk >>= 1;
+ if (in_be16(ccm->misccr2) & 2) /* fsys/4 */
+ gd->flb_clk >>= 1;
+
+ temp = ((pdr & PLL_DR_OUTDIV2_BITS) >> 5) + 1;
+ gd->bus_clk = vco / temp; /* bus clock */
+
+}
+#endif
+
+#ifdef CONFIG_MCF5445x
+void setup_5445x_clocks(void)
+{
ccm_t *ccm = (ccm_t *)MMAP_CCM;
pll_t *pll = (pll_t *)MMAP_PLL;
int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 };
int pllmult_pci[] = { 12, 6, 16, 8 };
- int vco = 0, bPci, temp, fbtemp, pcrvalue;
+ int vco = 0, temp, fbtemp, pcrvalue;
int *pPllmult = NULL;
u16 fbpll_mask;
+#ifdef CONFIG_PCI
+ int bPci;
+#endif
#ifdef CONFIG_M54455EVB
u8 *cpld = (u8 *)(CONFIG_SYS_CS2_BASE + 3);
((in_be16(&ccm->ccr) & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) {
pPllmult = &pllmult_pci[0];
fbpll_mask = 3; /* 11b */
+#ifdef CONFIG_PCI
bPci = 1;
+#endif
} else {
pPllmult = &pllmult_nopci[0];
fbpll_mask = 7; /* 111b */
#ifdef CONFIG_PCI
gd->pci_clk = 0;
-#endif
bPci = 0;
+#endif
}
#ifdef CONFIG_M54455EVB
#endif
}
+#ifdef CONFIG_FSL_I2C
+ gd->i2c1_clk = gd->bus_clk;
+#endif
+}
+#endif
+
+/* get_clocks() fills in gd->cpu_clock and gd->bus_clk */
+int get_clocks(void)
+{
+#ifdef CONFIG_MCF5441x
+ setup_5441x_clocks();
+#endif
+#ifdef CONFIG_MCF5445x
+ setup_5445x_clocks();
+#endif
+
#ifdef CONFIG_FSL_I2C
gd->i2c1_clk = gd->bus_clk;
#endif
* Copyright (C) 2003 Josef Baumgartner <josef.baumgartner@telex.de>
* Based on code from Bernhard Kuhn <bkuhn@metrowerks.com>
*
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
* MA 02111-1307 USA
*/
+#include <common.h>
#include <asm-offsets.h>
#include <config.h>
+#include <timestamp.h>
#include "version.h"
#include <asm/cache.h>
addl #60,%sp; /* space for 15 regs */ \
rte;
-#if defined(CONFIG_CF_SBF)
+#if defined(CONFIG_SERIAL_BOOT)
#define ASM_DRAMINIT (asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_DRAMINIT_N (asm_dram_init - TEXT_BASE)
#define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
#endif
* These vectors are to catch any un-intended traps.
*/
_vectors:
-#if defined(CONFIG_CF_SBF)
+#if defined(CONFIG_SERIAL_BOOT)
INITSP: .long 0 /* Initial SP */
+#ifdef CONFIG_CF_SBF
INITPC: .long ASM_DRAMINIT /* Initial PC */
+#endif
+#ifdef CONFIG_SYS_NAND_BOOT
+INITPC: .long ASM_DRAMINIT_N /* Initial PC */
+#endif
#else
vector1E: .long _FAULT /* Autovector Level 6 */
vector1F: .long _FAULT /* Autovector Level 7 */
-#if !defined(CONFIG_CF_SBF)
+#if !defined(CONFIG_SERIAL_BOOT)
/* TRAP #0 - #15 */
vector20_2F:
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
#endif
-#if defined(CONFIG_CF_SBF)
+#if defined(CONFIG_SERIAL_BOOT)
/* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */
asm_sbf_img_hdr:
.long 0x00000000 /* checksum, not yet implemented */
- .long 0x00030000 /* image length */
+ .long 0x00040000 /* image length */
.long CONFIG_SYS_TEXT_BASE /* image to be relocated at */
asm_dram_init:
move.w #0x2700,%sr /* Mask off Interrupt */
+#ifdef CONFIG_SYS_NAND_BOOT
+ /* for assembly stack */
+ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
+ movec %d0, %RAMBAR1
+
+ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
+ clr.l %sp@-
+#endif
+
+#ifdef CONFIG_CF_SBF
move.l #CONFIG_SYS_INIT_RAM_ADDR, %d0
movec %d0, %VBR
move.l #(CONFIG_SYS_CS0_CTRL), (%a1)
move.l #0xFC008004, %a1
move.l #(CONFIG_SYS_CS0_MASK), (%a1)
+#endif /* CONFIG_CF_SBF */
+
+#ifdef CONFIG_MCF5441x
+ /* TC: enable all peripherals,
+ in the future only enable certain peripherals */
+ move.l #0xFC04002D, %a1
+#if defined(CONFIG_CF_SBF)
+ move.b #23, (%a1) /* dspi */
+#endif
+ move.b #46, (%a1) /* DDR */
+
+ /* slew settings */
+ move.l #0xEC094060, %a1
+ move.b #0, (%a1)
+
+ /* use vco instead of cpu*2 clock for ddr clock */
+ move.l #0xEC09001A, %a1
+ move.w #0xE01D, (%a1)
+
+ /* DDR settings */
+ move.l #0xFC0B8180, %a1
+ move.l #0x00000000, (%a1)
+ move.l #0x40000000, (%a1)
+
+ move.l #0xFC0B81AC, %a1
+ move.l #0x01030203, (%a1)
+
+ move.l #0xFC0B8000, %a1
+ move.l #0x01010101, (%a1)+ /* 0x00 */
+ move.l #0x00000101, (%a1)+ /* 0x04 */
+ move.l #0x01010100, (%a1)+ /* 0x08 */
+ move.l #0x01010000, (%a1)+ /* 0x0C */
+ move.l #0x00010101, (%a1)+ /* 0x10 */
+ move.l #0xFC0B8018, %a1
+ move.l #0x00010100, (%a1)+ /* 0x18 */
+ move.l #0x00000001, (%a1)+ /* 0x1C */
+ move.l #0x01000001, (%a1)+ /* 0x20 */
+ move.l #0x00000100, (%a1)+ /* 0x24 */
+ move.l #0x00010001, (%a1)+ /* 0x28 */
+ move.l #0x00000200, (%a1)+ /* 0x2C */
+ move.l #0x01000002, (%a1)+ /* 0x30 */
+ move.l #0x00000000, (%a1)+ /* 0x34 */
+ move.l #0x00000100, (%a1)+ /* 0x38 */
+ move.l #0x02000100, (%a1)+ /* 0x3C */
+ move.l #0x02000407, (%a1)+ /* 0x40 */
+ move.l #0x02030007, (%a1)+ /* 0x44 */
+ move.l #0x02000100, (%a1)+ /* 0x48 */
+ move.l #0x0A030203, (%a1)+ /* 0x4C */
+ move.l #0x00020708, (%a1)+ /* 0x50 */
+ move.l #0x00050008, (%a1)+ /* 0x54 */
+ move.l #0x04030002, (%a1)+ /* 0x58 */
+ move.l #0x00000004, (%a1)+ /* 0x5C */
+ move.l #0x020A0000, (%a1)+ /* 0x60 */
+ move.l #0x0C00000E, (%a1)+ /* 0x64 */
+ move.l #0x00002004, (%a1)+ /* 0x68 */
+ move.l #0x00000000, (%a1)+ /* 0x6C */
+ move.l #0x00100010, (%a1)+ /* 0x70 */
+ move.l #0x00100010, (%a1)+ /* 0x74 */
+ move.l #0x00000000, (%a1)+ /* 0x78 */
+ move.l #0x07990000, (%a1)+ /* 0x7C */
+ move.l #0xFC0B80A0, %a1
+ move.l #0x00000000, (%a1)+ /* 0xA0 */
+ move.l #0x00C80064, (%a1)+ /* 0xA4 */
+ move.l #0x44520002, (%a1)+ /* 0xA8 */
+ move.l #0x00C80023, (%a1)+ /* 0xAC */
+ move.l #0xFC0B80B4, %a1
+ move.l #0x0000C350, (%a1) /* 0xB4 */
+ move.l #0xFC0B80E0, %a1
+ move.l #0x04000000, (%a1)+ /* 0xE0 */
+ move.l #0x03000304, (%a1)+ /* 0xE4 */
+ move.l #0x40040000, (%a1)+ /* 0xE8 */
+ move.l #0xC0004004, (%a1)+ /* 0xEC */
+ move.l #0x0642C000, (%a1)+ /* 0xF0 */
+ move.l #0x00000642, (%a1)+ /* 0xF4 */
+ move.l #0xFC0B8024, %a1
+ tpf
+ move.l #0x01000100, (%a1) /* 0x24 */
+
+ move.l #0x2000, %d1
+ jsr asm_delay
+#endif /* CONFIG_MCF5441x */
+
+#ifdef CONFIG_MCF5445x
/* Dram Initialization a1, a2, and d0 */
/* mscr sdram */
move.l #0xFC0A4074, %a1
add.l #1, %d1
cmp.l #1, %d2
bne dramsz_loop
-
+#ifdef CONFIG_SYS_NAND_BOOT
+ beq asm_nand_chk_status
+#endif
/* SDRAM Chip 0 and 1 */
move.l #(CONFIG_SYS_SDRAM_BASE), (%a1)
or.l %d1, (%a1)
move.l #2000, %d1
jsr asm_delay
+#endif /* CONFIG_MCF5445x */
+#ifdef CONFIG_CF_SBF
/*
* DSPI Initialization
* a0 - general, sram - 0x80008000 - 32, see M54455EVB.h
*/
/* Enable pins for DSPI mode - chip-selects are enabled later */
asm_dspi_init:
+#ifdef CONFIG_MCF5441x
+ move.l #0xEC09404E, %a1
+ move.l #0xEC09404F, %a2
+ move.b #0xFF, (%a1)
+ move.b #0x80, (%a2)
+#endif
+
+#ifdef CONFIG_MCF5445x
move.l #0xFC0A4063, %a0
move.b #0x7F, (%a0)
-
+#endif
/* Configure DSPI module */
move.l #0xFC05C000, %a0
move.l #0x80FF0C00, (%a0) /* Master, clear TX/RX FIFO */
move.l #0xFC05C00C, %a0
+#ifdef CONFIG_MCF5441x
+ move.l #0x3E000016, (%a0)
+#endif
+#ifdef CONFIG_MCF5445x
move.l #0x3E000011, (%a0)
+#endif
move.l #0xFC05C034, %a2 /* dtfr */
move.l #0xFC05C03B, %a3 /* drfr */
move.b (%a3), %d1
rts
+#endif /* CONFIG_CF_SBF */
+
+#ifdef CONFIG_SYS_NAND_BOOT
+ /* copy 4 boot pages to dram as soon as possible */
+ /* each page is 996 bytes (1056 total with 60 ECC bytes */
+ move.l #0x00000000, %a1 /* src */
+ move.l #TEXT_BASE, %a2 /* dst */
+ move.l #0x3E0, %d0 /* sz in long */
+
+asm_boot_nand_copy:
+ move.l (%a1)+, (%a2)+
+ subq.l #1, %d0
+ bne asm_boot_nand_copy
+
+ /* jump to memory and execute */
+ move.l #(asm_nand_init), %a0
+ jmp (%a0)
+
+asm_nand_init:
+ /* exit nand boot-mode */
+ move.l #0xFC0FFF30, %a1
+ or.l #0x00000040, %d1
+ move.l %d1, (%a1)
+
+ /* initialize general use internal ram */
+ move.l #0, %d0
+ move.l #(CACR_STATUS), %a1 /* CACR */
+ move.l #(ICACHE_STATUS), %a2 /* icache */
+ move.l #(DCACHE_STATUS), %a3 /* dcache */
+ move.l %d0, (%a1)
+ move.l %d0, (%a2)
+ move.l %d0, (%a3)
+
+ /* invalidate and disable cache */
+ move.l #0x01004100, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ move.l #0, %d0
+ movec %d0, %ACR0
+ movec %d0, %ACR1
+ movec %d0, %ACR2
+ movec %d0, %ACR3
+
+ /* Must disable global address */
+ move.l #0xFC008000, %a1
+ move.l #(CONFIG_SYS_CS0_BASE), (%a1)
+ move.l #0xFC008008, %a1
+ move.l #(CONFIG_SYS_CS0_CTRL), (%a1)
+ move.l #0xFC008004, %a1
+ move.l #(CONFIG_SYS_CS0_MASK), (%a1)
+
+ /* NAND port configuration */
+ move.l #0xEC094048, %a1
+ move.b #0xFD, (%a1)+
+ move.b #0x5F, (%a1)+
+ move.b #0x04, (%a1)+
+
+ /* reset nand */
+ move.l #0xFC0FFF38, %a1 /* isr */
+ move.l #0x000e0000, (%a1)
+ move.l #0xFC0FFF08, %a2
+ move.l #0x00000000, (%a2)+ /* car */
+ move.l #0x11000000, (%a2)+ /* rar */
+ move.l #0x00000000, (%a2)+ /* rpt */
+ move.l #0x00000000, (%a2)+ /* rai */
+ move.l #0xFC0FFF2c, %a2 /* cfg */
+ move.l #0x00000000, (%a2)+ /* secsz */
+ move.l #0x000e0681, (%a2)+
+ move.l #0xFC0FFF04, %a2 /* cmd2 */
+ move.l #0xFF404001, (%a2)
+ move.l #0x000e0000, (%a1)
+
+ move.l #0x2000, %d1
+ jsr asm_delay
+
+ /* setup nand */
+ move.l #0xFC0FFF00, %a1
+ move.l #0x30700000, (%a1)+ /* cmd1 */
+ move.l #0x007EF000, (%a1)+ /* cmd2 */
+
+ move.l #0xFC0FFF2C, %a1
+ move.l #0x00000841, (%a1)+ /* secsz */
+ move.l #0x000e0681, (%a1)+ /* cfg */
+
+ move.l #100, %d4 /* 100 pages ~200KB */
+ move.l #4, %d2 /* start at 4 */
+ move.l #0xFC0FFF04, %a0 /* cmd2 */
+ move.l #0xFC0FFF0C, %a1 /* rar */
+ move.l #(TEXT_BASE + 0xF80), %a2 /* dst */
+
+asm_nand_read:
+ move.l #0x11000000, %d0 /* rar */
+ or.l %d2, %d0
+ move.l %d0, (%a1)
+ add.l #1, %d2
+
+ move.l (%a0), %d0 /* cmd2 */
+ or.l #1, %d0
+ move.l %d0, (%a0)
+
+ move.l #0x200, %d1
+ jsr asm_delay
+
+asm_nand_chk_status:
+ move.l #0xFC0FFF38, %a4 /* isr */
+ move.l (%a4), %d0
+ and.l #0x40000000, %d0
+ tst.l %d0
+ beq asm_nand_chk_status
+
+ move.l #0xFC0FFF38, %a4 /* isr */
+ move.l (%a4), %d0
+ or.l #0x000E0000, %d0
+ move.l %d0, (%a4)
+
+ move.l #0x200, %d3
+ move.l #0xFC0FC000, %a3 /* buf 1 */
+asm_nand_copy:
+ move.l (%a3)+, (%a2)+
+ subq.l #1, %d3
+ bgt asm_nand_copy
+
+ subq.l #1, %d4
+ bgt asm_nand_read
+
+ /* jump to memory and execute */
+ move.l #(TEXT_BASE + 0x400), %a0
+ jmp (%a0)
+
+#endif /* CONFIG_SYS_NAND_BOOT */
asm_delay:
nop
subq.l #1, %d1
bne asm_delay
rts
-#endif /* CONFIG_CF_SBF */
+#endif /* CONFIG_CF_SBF || CONFIG_NAND_U_BOOT */
.text
. = 0x400
.globl _start
_start:
-#if !defined(CONFIG_CF_SBF)
+#if !defined(CONFIG_SERIAL_BOOT)
nop
nop
move.w #0x2700,%sr /* Mask off Interrupt */
movec %d0, %ACR1
movec %d0, %ACR2
movec %d0, %ACR3
+#else
+ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
+ movec %d0, %RAMBAR1
+#endif
/* set stackpointer to end of internal ram to get some stackspace for
the first c-code */
move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
clr.l %sp@-
-#endif
move.l #__got_start, %a5 /* put relocation table address to a5 */
move.l #__got_start, %a5 /* put relocation table address to a5 */
- bsr cpu_init_f /* run low-level CPU init code (from flash) */
- bsr board_init_f /* run low-level board init code (from flash) */
+ jbsr cpu_init_f /* run low-level CPU init code (from flash) */
+ jbsr board_init_f /* run low-level board init code (from flash) */
/* board_init_f() does not return */
/*
* ColdFire cache
*
- * Copyright (C) 2004-2010 Freescale Semiconductor, Inc.
+ * Copyright 2004-2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
#if defined(CONFIG_MCF547x_8x) || defined(CONFIG_MCF5445x)
#define CONFIG_CF_V4
-#if defined(CONFIG_MCF5441x)
+#elif defined(CONFIG_MCF5441x)
#define CONFIG_CF_V4E /* Four Extra ACRn */
#endif
-#endif
/* ***** CACR ***** */
/* V2 Core */
#endif /* CONFIG_CF_V3 */
/* V4 Core */
-#ifdef CONFIG_CF_V4
+#if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E)
#define CF_CACR_DEC (1 << 31)
#define CF_CACR_DW (1 << 30)
#define CF_CACR_IDSP (1 << 7)
#define CF_CACR_EUSP (1 << 5)
-#ifdef CONFIG_MCF5445x
+#if defined(CONFIG_MCF5445x) || defined(CONFIG_MCF5441x)
#define CF_CACR_IVO (1 << 20)
#define CF_CACR_SPA (1 << 14)
#else
#endif /* CONFIG_CF_V2 */
/* V4 Core */
-#ifdef CONFIG_CF_V4
+#if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E)
#define CF_ACR_AMM (1 << 10)
#define CF_ACR_SP (1 << 3)
#endif /* CONFIG_CF_V4 */
typedef struct global_data {
bd_t *bd;
unsigned long flags;
- unsigned long baudrate;
+ unsigned int baudrate;
unsigned long cpu_clk; /* CPU clock in Hz! */
unsigned long bus_clk;
#ifdef CONFIG_PCI
/*
* ColdFire Internal Memory Map and Defines
*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright 2004-2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_SYS_NUM_IRQS (128)
#endif /* CONFIG_M5329 && CONFIG_M5373 */
+#if defined(CONFIG_M54418)
+#include <asm/immap_5441x.h>
+#include <asm/m5441x.h>
+
+#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0)
+#define CONFIG_SYS_FEC1_IOBASE (MMAP_FEC1)
+
+#if (CONFIG_SYS_UART_PORT < 4)
+#define CONFIG_SYS_UART_BASE (MMAP_UART0 + \
+ (CONFIG_SYS_UART_PORT * 0x4000))
+#else
+#define CONFIG_SYS_UART_BASE (MMAP_UART4 + \
+ ((CONFIG_SYS_UART_PORT - 4) * 0x4000))
+#endif
+
+#define MMAP_DSPI MMAP_DSPI0
+#define CONFIG_SYS_MCFRTC_BASE (MMAP_RTC)
+
+/* Timer */
+#ifdef CONFIG_MCFTMR
+#define CONFIG_SYS_UDELAY_BASE (MMAP_DTMR0)
+#define CONFIG_SYS_TMR_BASE (MMAP_DTMR1)
+#define CONFIG_SYS_TMRPND_REG (((int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
+#define CONFIG_SYS_TMRINTR_NO (INT0_HI_DTMR1)
+#define CONFIG_SYS_TMRINTR_MASK (INTC_IPRH_INT33)
+#define CONFIG_SYS_TMRINTR_PEND (CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI (6)
+#define CONFIG_SYS_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8)
+#endif
+
+#ifdef CONFIG_MCFPIT
+#define CONFIG_SYS_UDELAY_BASE (MMAP_PIT0)
+#define CONFIG_SYS_PIT_BASE (MMAP_PIT1)
+#define CONFIG_SYS_PIT_PRESCALE (6)
+#endif
+
+#define CONFIG_SYS_INTR_BASE (MMAP_INTC0)
+#define CONFIG_SYS_NUM_IRQS (128)
+
+#endif /* CONFIG_M54418 */
+
#if defined(CONFIG_M54451) || defined(CONFIG_M54455)
#include <asm/immap_5445x.h>
#include <asm/m5445x.h>
--- /dev/null
+/*
+ * MCF5441x Internal Memory Map
+ *
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMMAP_5441X__
+#define __IMMAP_5441X__
+
+/* Module Base Addresses */
+#define MMAP_XBS 0xFC004000
+#define MMAP_FBCS 0xFC008000
+#define MMAP_CAN0 0xFC020000
+#define MMAP_CAN1 0xFC024000
+#define MMAP_I2C1 0xFC038000
+#define MMAP_DSPI1 0xFC03C000
+#define MMAP_SCM 0xFC040000
+#define MMAP_PM 0xFC04002C
+#define MMAP_EDMA 0xFC044000
+#define MMAP_INTC0 0xFC048000
+#define MMAP_INTC1 0xFC04C000
+#define MMAP_INTC2 0xFC050000
+#define MMAP_IACK 0xFC054000
+#define MMAP_I2C0 0xFC058000
+#define MMAP_DSPI0 0xFC05C000
+#define MMAP_UART0 0xFC060000
+#define MMAP_UART1 0xFC064000
+#define MMAP_UART2 0xFC068000
+#define MMAP_UART3 0xFC06C000
+#define MMAP_DTMR0 0xFC070000
+#define MMAP_DTMR1 0xFC074000
+#define MMAP_DTMR2 0xFC078000
+#define MMAP_DTMR3 0xFC07C000
+#define MMAP_PIT0 0xFC080000
+#define MMAP_PIT1 0xFC084000
+#define MMAP_PIT2 0xFC088000
+#define MMAP_PIT3 0xFC08C000
+#define MMAP_EPORT0 0xFC090000
+#define MMAP_ADC 0xFC094000
+#define MMAP_DAC0 0xFC098000
+#define MMAP_DAC1 0xFC09C000
+#define MMAP_RRTC 0xFC0A8000
+#define MMAP_SIM 0xFC0AC000
+#define MMAP_USBOTG 0xFC0B0000
+#define MMAP_USBEHCI 0xFC0B4000
+#define MMAP_SDRAM 0xFC0B8000
+#define MMAP_SSI0 0xFC0BC000
+#define MMAP_PLL 0xFC0C0000
+#define MMAP_RNG 0xFC0C4000
+#define MMAP_SSI1 0xFC0C8000
+#define MMAP_ESDHC 0xFC0CC000
+#define MMAP_FEC0 0xFC0D4000
+#define MMAP_FEC1 0xFC0D8000
+#define MMAP_L2_SW0 0xFC0DC000
+#define MMAP_L2_SW1 0xFC0E0000
+
+#define MMAP_NFC_RAM 0xFC0FC000
+#define MMAP_NFC 0xFC0FF000
+
+#define MMAP_1WIRE 0xEC008000
+#define MMAP_I2C2 0xEC010000
+#define MMAP_I2C3 0xEC014000
+#define MMAP_I2C4 0xEC018000
+#define MMAP_I2C5 0xEC01C000
+#define MMAP_DSPI2 0xEC038000
+#define MMAP_DSPI3 0xEC03C000
+#define MMAP_UART4 0xEC060000
+#define MMAP_UART5 0xEC064000
+#define MMAP_UART6 0xEC068000
+#define MMAP_UART7 0xEC06C000
+#define MMAP_UART8 0xEC070000
+#define MMAP_UART9 0xEC074000
+#define MMAP_RCM 0xEC090000
+#define MMAP_CCM 0xEC090000
+#define MMAP_GPIO 0xEC094000
+
+#include <asm/coldfire/crossbar.h>
+#include <asm/coldfire/dspi.h>
+#include <asm/coldfire/edma.h>
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/flexcan.h>
+#include <asm/coldfire/intctrl.h>
+#include <asm/coldfire/ssi.h>
+
+/* Serial Boot Facility (SBF) */
+typedef struct sbf {
+ u8 resv0[0x18];
+ u16 sbfsr; /* Serial Boot Facility Status */
+ u8 resv1[0x6];
+ u16 sbfcr; /* Serial Boot Facility Control */
+} sbf_t;
+
+/* Reset Controller Module (RCM) */
+typedef struct rcm {
+ u8 rcr;
+ u8 rsr;
+} rcm_t;
+
+/* Chip Configuration Module (CCM) */
+typedef struct ccm {
+ u8 ccm_resv0[0x4]; /* 0x00 */
+ u16 ccr; /* 0x04 Chip Configuration */
+ u8 resv1[0x2]; /* 0x06 */
+ u16 rcon; /* 0x08 Reset Configuration */
+ u16 cir; /* 0x0A Chip Identification */
+ u8 resv2[0x2]; /* 0x0C */
+ u16 misccr; /* 0x0E Miscellaneous Control */
+ u16 cdrh; /* 0x10 Clock Divider */
+ u16 cdrl; /* 0x12 Clock Divider */
+ u16 uocsr; /* 0x14 USB On-the-Go Controller Status */
+ u16 uhcsr; /* 0x16 */
+ u16 misccr3; /* 0x18 */
+ u16 misccr2; /* 0x1A */
+ u16 adctsr; /* 0x1C */
+ u16 dactsr; /* 0x1E */
+ u16 sbfsr; /* 0x20 */
+ u16 sbfcr; /* 0x22 */
+ u32 fnacr; /* 0x24 */
+} ccm_t;
+
+/* General Purpose I/O Module (GPIO) */
+typedef struct gpio {
+ u8 podr_a; /* 0x00 */
+ u8 podr_b; /* 0x01 */
+ u8 podr_c; /* 0x02 */
+ u8 podr_d; /* 0x03 */
+ u8 podr_e; /* 0x04 */
+ u8 podr_f; /* 0x05 */
+ u8 podr_g; /* 0x06 */
+ u8 podr_h; /* 0x07 */
+ u8 podr_i; /* 0x08 */
+ u8 podr_j; /* 0x09 */
+ u8 podr_k; /* 0x0A */
+ u8 rsvd0; /* 0x0B */
+
+ u8 pddr_a; /* 0x0C */
+ u8 pddr_b; /* 0x0D */
+ u8 pddr_c; /* 0x0E */
+ u8 pddr_d; /* 0x0F */
+ u8 pddr_e; /* 0x10 */
+ u8 pddr_f; /* 0x11 */
+ u8 pddr_g; /* 0x12 */
+ u8 pddr_h; /* 0x13 */
+ u8 pddr_i; /* 0x14 */
+ u8 pddr_j; /* 0x15 */
+ u8 pddr_k; /* 0x16 */
+ u8 rsvd1; /* 0x17 */
+
+ u8 ppdsdr_a; /* 0x18 */
+ u8 ppdsdr_b; /* 0x19 */
+ u8 ppdsdr_c; /* 0x1A */
+ u8 ppdsdr_d; /* 0x1B */
+ u8 ppdsdr_e; /* 0x1C */
+ u8 ppdsdr_f; /* 0x1D */
+ u8 ppdsdr_g; /* 0x1E */
+ u8 ppdsdr_h; /* 0x1F */
+ u8 ppdsdr_i; /* 0x20 */
+ u8 ppdsdr_j; /* 0x21 */
+ u8 ppdsdr_k; /* 0x22 */
+ u8 rsvd2; /* 0x23 */
+
+ u8 pclrr_a; /* 0x24 */
+ u8 pclrr_b; /* 0x25 */
+ u8 pclrr_c; /* 0x26 */
+ u8 pclrr_d; /* 0x27 */
+ u8 pclrr_e; /* 0x28 */
+ u8 pclrr_f; /* 0x29 */
+ u8 pclrr_g; /* 0x2A */
+ u8 pclrr_h; /* 0x2B */
+ u8 pclrr_i; /* 0x2C */
+ u8 pclrr_j; /* 0x2D */
+ u8 pclrr_k; /* 0x2E */
+ u8 rsvd3; /* 0x2F */
+
+ u16 pcr_a; /* 0x30 */
+ u16 pcr_b; /* 0x32 */
+ u16 pcr_c; /* 0x34 */
+ u16 pcr_d; /* 0x36 */
+ u16 pcr_e; /* 0x38 */
+ u16 pcr_f; /* 0x3A */
+ u16 pcr_g; /* 0x3C */
+ u16 pcr_h; /* 0x3E */
+ u16 pcr_i; /* 0x40 */
+ u16 pcr_j; /* 0x42 */
+ u16 pcr_k; /* 0x44 */
+ u16 rsvd4; /* 0x46 */
+
+ u8 par_fbctl; /* 0x48 */
+ u8 par_be; /* 0x49 */
+ u8 par_cs; /* 0x4A */
+ u8 par_cani2c; /* 0x4B */
+ u8 par_irqh; /* 0x4C */
+ u8 par_irql; /* 0x4D */
+ u8 par_dspi0; /* 0x4E */
+ u8 par_dspiow; /* 0x4F */
+ u8 par_timer; /* 0x50 */
+ u8 par_uart2; /* 0x51 */
+ u8 par_uart1; /* 0x52 */
+ u8 par_uart0; /* 0x53 */
+ u8 par_sdhch; /* 0x54 */
+ u8 par_sdhcl; /* 0x55 */
+ u8 par_simp0h; /* 0x56 */
+ u8 par_simp1h; /* 0x57 */
+ u8 par_ssi0h; /* 0x58 */
+ u8 par_ssi0l; /* 0x59 */
+ u8 par_dbg1h; /* 0x5A */
+ u8 par_dbg0h; /* 0x5B */
+ u8 par_dbgl; /* 0x5C */
+ u8 rsvd5; /* 0x5D */
+ u8 par_fec; /* 0x5E */
+ u8 rsvd6; /* 0x5F */
+
+ u8 mscr_sdram; /* 0x60 */
+ u8 rsvd7[3]; /* 0x61-0x63 */
+
+ u8 srcr_fb1; /* 0x64 */
+ u8 srcr_fb2; /* 0x65 */
+ u8 srcr_fb3; /* 0x66 */
+ u8 srcr_fb4; /* 0x67 */
+ u8 srcr_dspiow; /* 0x68 */
+ u8 srcr_cani2c; /* 0x69 */
+ u8 srcr_irq; /* 0x6A */
+ u8 srcr_timer; /* 0x6B */
+ u8 srcr_uart; /* 0x6C */
+ u8 srcr_fec; /* 0x6D */
+ u8 srcr_sdhc; /* 0x6E */
+ u8 srcr_simp0; /* 0x6F */
+ u8 srcr_ssi0; /* 0x70 */
+ u8 rsvd8[3]; /* 0x71-0x73 */
+
+ u16 urts_pol; /* 0x74 */
+ u16 ucts_pol; /* 0x76 */
+ u16 utxd_wom; /* 0x78 */
+ u32 urxd_wom; /* 0x7c */
+
+ u32 hcr1; /* 0x80 */
+ u32 hcr0; /* 0x84 */
+} gpio_t;
+
+/* SDRAM Controller (SDRAMC) */
+typedef struct sdramc {
+ u32 cr00; /* 0x00 */
+ u32 cr01; /* 0x04 */
+ u32 cr02; /* 0x08 */
+ u32 cr03; /* 0x0C */
+ u32 cr04; /* 0x10 */
+ u32 cr05; /* 0x14 */
+ u32 cr06; /* 0x18 */
+ u32 cr07; /* 0x1C */
+
+ u32 cr08; /* 0x20 */
+ u32 cr09; /* 0x24 */
+ u32 cr10; /* 0x28 */
+ u32 cr11; /* 0x2C */
+ u32 cr12; /* 0x30 */
+ u32 cr13; /* 0x34 */
+ u32 cr14; /* 0x38 */
+ u32 cr15; /* 0x3C */
+
+ u32 cr16; /* 0x40 */
+ u32 cr17; /* 0x44 */
+ u32 cr18; /* 0x48 */
+ u32 cr19; /* 0x4C */
+ u32 cr20; /* 0x50 */
+ u32 cr21; /* 0x54 */
+ u32 cr22; /* 0x58 */
+ u32 cr23; /* 0x5C */
+
+ u32 cr24; /* 0x60 */
+ u32 cr25; /* 0x64 */
+ u32 cr26; /* 0x68 */
+ u32 cr27; /* 0x6C */
+ u32 cr28; /* 0x70 */
+ u32 cr29; /* 0x74 */
+ u32 cr30; /* 0x78 */
+ u32 cr31; /* 0x7C */
+
+ u32 cr32; /* 0x80 */
+ u32 cr33; /* 0x84 */
+ u32 cr34; /* 0x88 */
+ u32 cr35; /* 0x8C */
+ u32 cr36; /* 0x90 */
+ u32 cr37; /* 0x94 */
+ u32 cr38; /* 0x98 */
+ u32 cr39; /* 0x9C */
+
+ u32 cr40; /* 0xA0 */
+ u32 cr41; /* 0xA4 */
+ u32 cr42; /* 0xA8 */
+ u32 cr43; /* 0xAC */
+ u32 cr44; /* 0xB0 */
+ u32 cr45; /* 0xB4 */
+ u32 cr46; /* 0xB8 */
+ u32 cr47; /* 0xBC */
+ u32 cr48; /* 0xC0 */
+ u32 cr49; /* 0xC4 */
+ u32 cr50; /* 0xC8 */
+ u32 cr51; /* 0xCC */
+ u32 cr52; /* 0xD0 */
+ u32 cr53; /* 0xD4 */
+ u32 cr54; /* 0xD8 */
+ u32 cr55; /* 0xDC */
+ u32 cr56; /* 0xE0 */
+ u32 cr57; /* 0xE4 */
+ u32 cr58; /* 0xE8 */
+ u32 cr59; /* 0xEC */
+ u32 cr60; /* 0xF0 */
+ u32 cr61; /* 0xF4 */
+ u32 cr62; /* 0xF8 */
+ u32 cr63; /* 0xFC */
+
+ u32 rsvd3[32]; /* 0xF4-0x1A8 */
+
+ u32 rcrcr; /* 0x180 */
+ u32 swrcr; /* 0x184 */
+ u32 rcr; /* 0x188 */
+ u32 msovr; /* 0x18C */
+ u32 rcrdbg; /* 0x190 */
+ u32 sl0adj; /* 0x194 */
+ u32 sl1adj; /* 0x198 */
+ u32 sl2adj; /* 0x19C */
+ u32 sl3adj; /* 0x1A0 */
+ u32 sl4adj; /* 0x1A4 */
+ u32 flight_tm; /* 0x1A8 */
+ u32 padcr; /* 0x1AC */
+} sdramc_t;
+
+/* Phase Locked Loop (PLL) */
+typedef struct pll {
+ u32 pcr; /* Control */
+ u32 pdr; /* Divider */
+ u32 psr; /* Status */
+} pll_t;
+
+typedef struct scm {
+ u8 rsvd1[19]; /* 0x00 - 0x12 */
+ u8 wcr; /* 0x13 */
+ u16 rsvd2; /* 0x14 - 0x15 */
+ u16 cwcr; /* 0x16 */
+ u8 rsvd3[3]; /* 0x18 - 0x1A */
+ u8 cwsr; /* 0x1B */
+ u8 rsvd4[3]; /* 0x1C - 0x1E */
+ u8 scmisr; /* 0x1F */
+ u32 rsvd5; /* 0x20 - 0x23 */
+ u32 bcr; /* 0x24 */
+ u8 rsvd6[72]; /* 0x28 - 0x6F */
+ u32 cfadr; /* 0x70 */
+ u8 rsvd7; /* 0x74 */
+ u8 cfier; /* 0x75 */
+ u8 cfloc; /* 0x76 */
+ u8 cfatr; /* 0x77 */
+ u32 rsvd8; /* 0x78 - 0x7B */
+ u32 cfdtr; /* 0x7C */
+} scm_t;
+
+typedef struct pm {
+ u8 pmsr0; /* */
+ u8 pmcr0;
+ u8 pmsr1;
+ u8 pmcr1;
+ u32 pmhr0;
+ u32 pmlr0;
+ u32 pmhr1;
+ u32 pmlr1;
+} pm_t;
+
+#endif /* __IMMAP_5441X__ */
--- /dev/null
+/*
+ * MCF5441X Internal Memory Map
+ *
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MCF5441X__
+#define __MCF5441X__
+
+/* Interrupt Controller (INTC) */
+#define INT0_LO_RSVD0 (0)
+#define INT0_LO_EPORT1 (1)
+#define INT0_LO_EPORT2 (2)
+#define INT0_LO_EPORT3 (3)
+#define INT0_LO_EPORT4 (4)
+#define INT0_LO_EPORT5 (5)
+#define INT0_LO_EPORT6 (6)
+#define INT0_LO_EPORT7 (7)
+#define INT0_LO_EDMA_00 (8)
+#define INT0_LO_EDMA_01 (9)
+#define INT0_LO_EDMA_02 (10)
+#define INT0_LO_EDMA_03 (11)
+#define INT0_LO_EDMA_04 (12)
+#define INT0_LO_EDMA_05 (13)
+#define INT0_LO_EDMA_06 (14)
+#define INT0_LO_EDMA_07 (15)
+#define INT0_LO_EDMA_08 (16)
+#define INT0_LO_EDMA_09 (17)
+#define INT0_LO_EDMA_10 (18)
+#define INT0_LO_EDMA_11 (19)
+#define INT0_LO_EDMA_12 (20)
+#define INT0_LO_EDMA_13 (21)
+#define INT0_LO_EDMA_14 (22)
+#define INT0_LO_EDMA_15 (23)
+#define INT0_LO_EDMA_ERR (24)
+#define INT0_LO_SCM (25)
+#define INT0_LO_UART0 (26)
+#define INT0_LO_UART1 (27)
+#define INT0_LO_UART2 (28)
+#define INT0_LO_UART3 (29)
+#define INT0_LO_I2C0 (30)
+#define INT0_LO_DSPI0 (31)
+#define INT0_HI_DTMR0 (32)
+#define INT0_HI_DTMR1 (33)
+#define INT0_HI_DTMR2 (34)
+#define INT0_HI_DTMR3 (35)
+#define INT0_HI_MACNET0_TXF (36)
+#define INT0_HI_MACNET0_TXB (37)
+#define INT0_HI_MACNET0_UN (38)
+#define INT0_HI_MACNET0_RL (39)
+#define INT0_HI_MACNET0_RXF (40)
+#define INT0_HI_MACNET0_RXB (41)
+#define INT0_HI_MACNET0_MII (42)
+#define INT0_HI_MACNET0_LC (43)
+/* not used 44 */
+#define INT0_HI_MACNET0_GRA (45)
+#define INT0_HI_MACNET0_EBERR (46)
+#define INT0_HI_MACNET0_BABT (47)
+#define INT0_HI_MACNET0_BABR (48)
+#define INT0_HI_MACNET1_TXF (49)
+#define INT0_HI_MACNET1_TXB (50)
+#define INT0_HI_MACNET1_UN (51)
+#define INT0_HI_MACNET1_RL (52)
+#define INT0_HI_MACNET1_RXF (53)
+#define INT0_HI_MACNET1_RXB (54)
+#define INT0_HI_MACNET1_MII (55)
+#define INT0_HI_MACNET1_LC (56)
+/* not used 57 */
+#define INT0_HI_MACNET1_GRA (58)
+#define INT0_HI_MACNET1_EBERR (59)
+#define INT0_HI_MACNET1_BABT (60)
+#define INT0_HI_MACNET1_BABR (61)
+#define INT0_HI_SCMIR (62)
+#define INT0_HI_OW (63)
+
+#define INT1_LO_CAN0_IFG (0)
+#define INT1_LO_CAN0_BOFF (1)
+/* not used 2 */
+#define INT1_LO_CAN0_TXRXWRN (3)
+#define INT1_LO_CAN1_IFG (4)
+#define INT1_LO_CAN1_BOFF (5)
+/* not used 6 */
+#define INT1_LO_CAN1_TXRXWRN (7)
+#define INT1_LO_EDMA_16 (8)
+#define INT1_LO_EDMA_17 (9)
+#define INT1_LO_EDMA_18 (10)
+#define INT1_LO_EDMA_19 (11)
+#define INT1_LO_EDMA_20 (12)
+#define INT1_LO_EDMA_21 (13)
+#define INT1_LO_EDMA_22 (14)
+#define INT1_LO_EDMA_23 (15)
+#define INT1_LO_EDMA_24 (16)
+#define INT1_LO_EDMA_25 (17)
+#define INT1_LO_EDMA_26 (18)
+#define INT1_LO_EDMA_27 (19)
+#define INT1_LO_EDMA_28 (20)
+#define INT1_LO_EDMA_29 (21)
+#define INT1_LO_EDMA_30 (22)
+#define INT1_LO_EDMA_31 (23)
+#define INT1_LO_EDMA_32 (24)
+#define INT1_LO_EDMA_33 (25)
+#define INT1_LO_EDMA_34 (26)
+#define INT1_LO_EDMA_35 (27)
+#define INT1_LO_EDMA_36 (28)
+#define INT1_LO_EDMA_37 (29)
+#define INT1_LO_EDMA_38 (30)
+#define INT1_LO_EDMA_39 (31)
+#define INT1_LO_EDMA_40 (32)
+#define INT1_HI_EDMA_41 (33)
+#define INT1_HI_EDMA_42 (34)
+#define INT1_HI_EDMA_43 (35)
+#define INT1_HI_EDMA_44 (36)
+#define INT1_HI_EDMA_45 (37)
+#define INT1_HI_EDMA_46 (38)
+#define INT1_HI_EDMA_47 (39)
+#define INT1_HI_EDMA_48 (40)
+#define INT1_HI_EDMA_49 (41)
+#define INT1_HI_EDMA_50 (42)
+#define INT1_HI_EDMA_51 (43)
+#define INT1_HI_EDMA_52 (44)
+#define INT1_HI_EDMA_53 (45)
+#define INT1_HI_EDMA_54 (46)
+#define INT1_HI_EDMA_55 (47)
+#define INT1_HI_UART4 (48)
+#define INT1_HI_UART5 (49)
+#define INT1_HI_UART6 (50)
+#define INT1_HI_UART7 (51)
+#define INT1_HI_UART8 (52)
+#define INT1_HI_UART9 (53)
+#define INT1_HI_DSPI1 (54)
+#define INT1_HI_DSPI2 (55)
+#define INT1_HI_DSPI3 (56)
+#define INT1_HI_I2C1 (57)
+#define INT1_HI_I2C2 (58)
+#define INT1_HI_I2C3 (59)
+#define INT1_HI_I2C4 (60)
+#define INT1_HI_I2C5 (61)
+
+#define INT2_LO_EDMA56_63 (0)
+#define INT2_LO_PWM_SM0SR_CF (1)
+#define INT2_LO_PWM_SM1SR_CF (2)
+#define INT2_LO_PWM_SM2SR_CF (3)
+#define INT2_LO_PWM_SM3SR_CF (4)
+#define INT2_LO_PWM_SM0SR_RF (5)
+#define INT2_LO_PWM_SM1SR_RF (6)
+#define INT2_LO_PWM_SM2SR_RF (7)
+#define INT2_LO_PWM_SM3SR_RF (8)
+#define INT2_LO_PWM_FSR (9)
+#define INT2_LO_PWM_SMSR_REF (10)
+#define INT2_LO_PLL_SR_LOCF (11)
+#define INT2_LO_PLL_SR_LOLF (12)
+#define INT2_LO_PIT0_PIF (13)
+#define INT2_LO_PIT1_PIF (14)
+#define INT2_LO_PIT2_PIF (15)
+#define INT2_LO_PIT3_PIF (16)
+#define INT2_LO_USBOTG_USBSTS (17)
+#define INT2_LO_USBH_USBSTS (18)
+/* not used 19-20 */
+#define INT2_LO_SSI0 (21)
+#define INT2_LO_SSI1 (22)
+#define INT2_LO_NFC (23)
+/* not used 24-25 */
+#define INT2_LO_RTC (26)
+#define INT2_LO_CCM_UOCSR (27)
+#define INT2_LO_RNG_EI (28)
+#define INT2_LO_SIM1_DATA (29)
+#define INT2_LO_SIM1 (30)
+#define INT2_LO_SDHC (31)
+/* not used 32-37 */
+#define INT2_HI_L2SW_BERR (38)
+#define INT2_HI_L2SW_RXB (39)
+#define INT2_HI_L2SW_RXF (40)
+#define INT2_HI_L2SW_TXB (41)
+#define INT2_HI_L2SW_TXF (42)
+#define INT2_HI_L2SW_QM (43)
+#define INT2_HI_L2SW_OD0 (44)
+#define INT2_HI_L2SW_OD1 (45)
+#define INT2_HI_L2SW_OD2 (46)
+#define INT2_HI_L2SW_LRN (47)
+#define INT2_HI_MACNET0_TS (48)
+#define INT2_HI_MACNET0_WAKE (49)
+#define INT2_HI_MACNET0_PLR (50)
+/* not used 51-54 */
+#define INT2_HI_MACNET1_TS (51)
+#define INT2_HI_MACNET1_WAKE (52)
+#define INT2_HI_MACNET1_PLR (53)
+
+/* Serial Boot Facility (SBF) */
+#define SBF_SBFCR_BLDIV(x) (((x)&0x000F))
+#define SBF_SBFCR_FR (0x0010)
+
+/* Reset Controller Module (RCM) */
+#define RCM_RCR_SOFTRST (0x80)
+#define RCM_RCR_FRCRSTOUT (0x40)
+
+#define RCM_RSR_SOFT (0x20)
+#define RCM_RSR_LOC (0x10)
+#define RCM_RSR_POR (0x08)
+#define RCM_RSR_EXT (0x04)
+#define RCM_RSR_WDR_CORE (0x02)
+#define RCM_RSR_LOL (0x01)
+
+/* Chip Configuration Module (CCM) */
+#define CCM_CCR_BOOTMOD (0xC000)
+#define CCM_CCR_PLLMULT (0x0FC0)
+#define CCM_CCR_BOOTPS (0x0030)
+#define CCM_CCR_BOOTPS_32 (0x0000)
+#define CCM_CCR_BOOTPS_16 (0x0020)
+#define CCM_CCR_BOOTPS_8 (0x0010)
+#define CCM_CCR_BOOTPS_ (0x0000)
+#define CCM_CCR_ALESEL (0x0008)
+#define CCM_CCR_OSCMOD (0x0004)
+#define CCM_CCR_PLLMOD (0x0002)
+#define CCM_CCR_BOOTMEM (0x0001)
+
+#define CCM_CIR_PIN_MASK (0xFFC0)
+#define CCM_CIR_PRN_MASK (0x003F)
+#define CCM_CIR_PIN_MCF54410 (0x9F<<6)
+#define CCM_CIR_PIN_MCF54415 (0xA0<<6)
+#define CCM_CIR_PIN_MCF54416 (0xA1<<6)
+#define CCM_CIR_PIN_MCF54417 (0xA2<<6)
+#define CCM_CIR_PIN_MCF54418 (0xA3<<6)
+
+#define CCM_MISCCR_PWM_EXTCLK(x) (((x)&(0x0003)<<14)
+#define CCM_MISCCR_PWM_EXTCLK_MASK (0x3FFF)
+#define CCM_MISCCR_PWM_EXTCLK_TMR0 (0x0000)
+#define CCM_MISCCR_PWM_EXTCLK_TMR1 (0x4000)
+#define CCM_MISCCR_PWM_EXTCLK_TMR2 (0x8000)
+#define CCM_MISCCR_PWM_EXTCLK_TMR3 (0xC000)
+#define CCM_MISCCR_LIMP (0x1000)
+#define CCM_MISCCR_BME (0x0800)
+#define CCM_MISCCR_BMT(x) (((x)&0x0007)<<8)
+#define CCM_MISCCR_BMT_65536 (0)
+#define CCM_MISCCR_BMT_32768 (1)
+#define CCM_MISCCR_BMT_16384 (2)
+#define CCM_MISCCR_BMT_8192 (3)
+#define CCM_MISCCR_BMT_4096 (4)
+#define CCM_MISCCR_BMT_2048 (5)
+#define CCM_MISCCR_BMT_1024 (6)
+#define CCM_MISCCR_BMT_512 (7)
+#define CCM_MISCCR_SDHCSRC (0x0040)
+#define CCM_MISCCR_SSI1SRC (0x0020)
+#define CCM_MISCCR_SSI0SRC (0x0010)
+#define CCM_MISCCR_USBHOC (0x0008)
+#define CCM_MISCCR_USBOOC (0x0004)
+#define CCM_MISCCR_USBPUE (0x0002)
+#define CCM_MISCCR_USBSRC (0x0001)
+
+#define CCM_CDRH_SSI0DIV(x) (((x)&0x00FF)<<8)
+#define CCM_CDRH_SSI0DIV_MASK (0x00FF)
+#define CCM_CDRH_SSI1DIV(x) (((x)&0x00FF))
+#define CCM_CDRH_SSI1DIV_MASK (0xFF00)
+#define CCM_CDRL_LPDIV(x) (((x)&0x000F)<<8)
+#define CCM_CDRL_LPDIV_MASK (0xFF0F)
+#define CCM_CDR_LPDIV(x) CCM_CDRL_LPDIV(x)
+
+#define CCM_UOCSR_DPPD (0x2000)
+#define CCM_UOCSR_DMPD (0x1000)
+#define CCM_UOCSR_DRV_VBUS (0x0800)
+#define CCM_UOCSR_CRG_VBUS (0x0400)
+#define CCM_UOCSR_DCR_VBUS (0x0200)
+#define CCM_UOCSR_DPPU (0x0100)
+#define CCM_UOCSR_AVLD (0x0080)
+#define CCM_UOCSR_BVLD (0x0040)
+#define CCM_UOCSR_VVLD (0x0020)
+#define CCM_UOCSR_SEND (0x0010)
+#define CCM_UOCSR_PWRFLT (0x0008)
+#define CCM_UOCSR_WKUP (0x0004)
+#define CCM_UOCSR_UOMIE (0x0002)
+#define CCM_UOCSR_XPDE (0x0001)
+
+#define CCM_UHCSR_DRV_VBUS (0x0010)
+#define CCM_UHCSR_PWRFLT (0x0008)
+#define CCM_UHCSR_WKUP (0x0004)
+#define CCM_UHCSR_UOMIE (0x0002)
+#define CCM_UHCSR_XPDE (0x0001)
+
+#define CCM_MISCCR3_TMR_ENET (0x1000)
+#define CCM_MISCCR3_ENETCLK(x) (((x)&7)<<8)
+#define CCM_MISCCR3_ENETCLK_MASK (0xF8FF)
+#define CCM_MISCCR3_ENETCLK_MII (0x0700)
+#define CCM_MISCCR3_ENETCLK_OSC (0x0600)
+#define CCM_MISCCR3_ENETCLK_USB (0x0500)
+#define CCM_MISCCR3_ENETCLK_TMR3 (0x0400)
+#define CCM_MISCCR3_ENETCLK_TMR2 (0x0300)
+#define CCM_MISCCR3_ENETCLK_TMR1 (0x0200)
+#define CCM_MISCCR3_ENETCLK_TMR0 (0x0100)
+#define CCM_MISCCR3_ENETCLK_INTBUS (0x0000)
+
+#define CCM_MISCCR2_EXTCLKBYP (0x8000)
+#define CCM_MISCCR2_DDR2CLK (0x4000)
+#define CCM_MISCCR2_RGPIO_HALF (0x2000)
+#define CCM_MISCCR2_SWTSCR (0x1000)
+#define CCM_MISCCR2_PLLMODE(x) (((x)&7)<<8)
+#define CCM_MISCCR2_PLLMODE_MASK (0xF8FF)
+#define CCM_MISCCR2_DCCBYP (0x0080)
+#define CCM_MISCCR2_DAC1SEL (0x0040)
+#define CCM_MISCCR2_DAC0SEL (0x0020)
+#define CCM_MISCCR2_ADCEN (0x0010)
+#define CCM_MISCCR2_ADC7SEL (0x0008)
+#define CCM_MISCCR2_ADC3SEL (0x0004)
+#define CCM_MISCCR2_FBHALF (0x0002)
+#define CCM_MISCCR2_ULPI (0x0001)
+
+#define CCM_FNACR_PCR(x) (((x)&0x0F)<<24)
+#define CCM_FNACR_PCR_MASK (0xF0FFFFFF)
+#define CCM_FNACR_MCC(x) ((x)&0xFFFF)
+#define CCM_FNACR_MCC_MASK (0xFFFF0000)
+
+/* General Purpose I/O Module (GPIO) */
+#define GPIO_PAR_FBCTL_ALE(x) (((x)&3)<<6)
+#define GPIO_PAR_FBCTL_ALE_MASK (0x3F)
+#define GPIO_PAR_FBCTL_ALE_FB_ALE (0xC0)
+#define GPIO_PAR_FBCTL_ALE_FB_TS (0x80)
+#define GPIO_PAR_FBCTL_ALE_GPIO (0x00)
+#define GPIO_PAR_FBCTL_OE(x) (((x)&3)<<4)
+#define GPIO_PAR_FBCTL_OE_MASK (0xCF)
+#define GPIO_PAR_FBCTL_OE_FB_OE (0x30)
+#define GPIO_PAR_FBCTL_OE_FB_TBST (0x20)
+#define GPIO_PAR_FBCTL_OE_NFC_RE (0x20)
+#define GPIO_PAR_FBCTL_OE_GPIO (0x00)
+#define GPIO_PAR_FBCTL_FBCLK (0x08)
+#define GPIO_PAR_FBCTL_RW (0x04)
+#define GPIO_PAR_FBCTL_TA(x) ((x)&3)
+#define GPIO_PAR_FBCTL_TA_MASK (0xFC)
+#define GPIO_PAR_FBCTL_TA_TA (0x03)
+#define GPIO_PAR_FBCTL_TA_NFC_RB (0x01)
+#define GPIO_PAR_FBCTL_TA_GPIO (0x00)
+
+#define GPIO_PAR_BE_BS3(x) (((x)&0x03)<<6)
+#define GPIO_PAR_BE_BE3_MASK (0x3F)
+#define GPIO_PAR_BE_BE3_BE3 (0xC0)
+#define GPIO_PAR_BE_BE3_CS3 (0x80)
+#define GPIO_PAR_BE_BE3_FB_A1 (0x40)
+#define GPIO_PAR_BE_BE3_NFC_ALE (0x40)
+#define GPIO_PAR_BE_BE3_GPIO (0x00)
+#define GPIO_PAR_BE_BS2(x) (((x)&0x03)<<4)
+#define GPIO_PAR_BE_BE2_MASK (0xCF)
+#define GPIO_PAR_BE_BE2_BE2 (0x30)
+#define GPIO_PAR_BE_BE2_CS2 (0x20)
+#define GPIO_PAR_BE_BE2_FB_A0 (0x10)
+#define GPIO_PAR_BE_BE2_NFC_CLE (0x10)
+#define GPIO_PAR_BE_BE2_GPIO (0x00)
+#define GPIO_PAR_BE_BS1(x) (((x)&0x03)<<2)
+#define GPIO_PAR_BE_BE1_MASK (0xF3)
+#define GPIO_PAR_BE_BE1_BE1 (0x0C)
+#define GPIO_PAR_BE_BE1_FB_TSZ1 (0x08)
+#define GPIO_PAR_BE_BE1_GPIO (0x00)
+#define GPIO_PAR_BE_BS0(x) ((x)&0x03)
+#define GPIO_PAR_BE_BE0_MASK (0xFC)
+#define GPIO_PAR_BE_BE0_BE0 (0x03)
+#define GPIO_PAR_BE_BE0_FB_TSZ0 (0x02)
+#define GPIO_PAR_BE_BE0_GPIO (0x00)
+
+#define GPIO_PAR_CS_CS5(x) (((x)&0x03)<<6)
+#define GPIO_PAR_CS_CS5_MASK (0x3F)
+#define GPIO_PAR_CS_CS5_CS5 (0xC0)
+#define GPIO_PAR_CS_CS5_DACK1 (0x80)
+#define GPIO_PAR_CS_CS5_GPIO (0x00)
+#define GPIO_PAR_CS_CS4(x) (((x)&0x03)<<4)
+#define GPIO_PAR_CS_CS4_MASK (0xCF)
+#define GPIO_PAR_CS_CS4_CS4 (0x30)
+#define GPIO_PAR_CS_CS4_DREQ1 (0x20)
+#define GPIO_PAR_CS_CS4_GPIO (0x00)
+#define GPIO_PAR_CS_CS1(x) (((x)&0x03)<<2)
+#define GPIO_PAR_CS_CS1_MASK (0xF3)
+#define GPIO_PAR_CS_CS1_CS1 (0x0C)
+#define GPIO_PAR_CS_CS1_NFC_CE (0x04)
+#define GPIO_PAR_CS_CS1_GPIO (0x00)
+#define GPIO_PAR_CS_CS0_CS0 (0x01)
+
+#define GPIO_PAR_CANI2C_I2C0SCL(x) (((x)&0x03)<<6)
+#define GPIO_PAR_CANI2C_I2C0SCL_MASK (0x3F)
+#define GPIO_PAR_CANI2C_I2C0SCL_I2C0SCL (0xC0)
+#define GPIO_PAR_CANI2C_I2C0SCL_U8TXD (0x80)
+#define GPIO_PAR_CANI2C_I2C0SCL_CAN0TX (0x40)
+#define GPIO_PAR_CANI2C_I2C0SCL_GPIO (0x00)
+#define GPIO_PAR_CANI2C_I2C0SDA(x) (((x)&0x03)<<4)
+#define GPIO_PAR_CANI2C_I2C0SDA_MASK (0xCF)
+#define GPIO_PAR_CANI2C_I2C0SDA_I2C0SDA (0x30)
+#define GPIO_PAR_CANI2C_I2C0SDA_U8RXD (0x20)
+#define GPIO_PAR_CANI2C_I2C0SDA_CAN0RX (0x10)
+#define GPIO_PAR_CANI2C_I2C0SDA_GPIO (0x00)
+#define GPIO_PAR_CANI2C_CAN1TX(x) (((x)&0x03)<<2)
+#define GPIO_PAR_CANI2C_CAN1TX_MASK (0xF3)
+#define GPIO_PAR_CANI2C_CAN1TX_CAN1TX (0x0C)
+#define GPIO_PAR_CANI2C_CAN1TX_U9TXD (0x08)
+#define GPIO_PAR_CANI2C_CAN1TX_I2C1SCL (0x04)
+#define GPIO_PAR_CANI2C_CAN1TX_GPIO (0x00)
+#define GPIO_PAR_CANI2C_CAN1RX(x) ((x)&0x03)
+#define GPIO_PAR_CANI2C_CAN1RX_MASK (0xFC)
+#define GPIO_PAR_CANI2C_CAN1RX_CAN1RX (0x03)
+#define GPIO_PAR_CANI2C_CAN1RX_U9RXD (0x02)
+#define GPIO_PAR_CANI2C_CAN1RX_I2C1SDA (0x01)
+#define GPIO_PAR_CANI2C_CAN1RX_GPIO (0x00)
+
+#define GPIO_PAR_IRQH_IRQ7 (0x10)
+#define GPIO_PAR_IRQH_IRQ4(x) (((x)&0x03)<<2)
+#define GPIO_PAR_IRQH_IRQ4_MASK (0xF3)
+#define GPIO_PAR_IRQH_IRQ4_IRQ4 (0x0C)
+#define GPIO_PAR_IRQH_IRQ4_DREQ0 (0x08)
+#define GPIO_PAR_IRQH_IRQ4_GPIO (0x00)
+#define GPIO_PAR_IRQH_IRQ1 (0x03)
+
+#define GPIO_PAR_IRQL_IRQ6(x) (((x)&0x03)<<6)
+#define GPIO_PAR_IRQL_IRQ6_MASK (0x3F)
+#define GPIO_PAR_IRQL_IRQ6_IRQ6 (0xC0)
+#define GPIO_PAR_IRQL_IRQ6_USBCLKIN (0x40)
+#define GPIO_PAR_IRQL_IRQ6_GPIO (0x00)
+#define GPIO_PAR_IRQL_IRQ3(x) (((x)&0x03)<<4)
+#define GPIO_PAR_IRQL_IRQ3_MASK (0xCF)
+#define GPIO_PAR_IRQL_IRQ3_IRQ3 (0x30)
+#define GPIO_PAR_IRQL_IRQ3_DSPI0_PCS3 (0x20)
+#define GPIO_PAR_IRQL_IRQ3_USB1_VBUS_EN (0x10)
+#define GPIO_PAR_IRQL_IRQ3_GPIO (0x00)
+#define GPIO_PAR_IRQL_IRQ2(x) (((x)&0x03)<<2)
+#define GPIO_PAR_IRQL_IRQ2_MASK (0xF3)
+#define GPIO_PAR_IRQL_IRQ2_IRQ2 (0x0C)
+#define GPIO_PAR_IRQL_IRQ2_DSPI0_PCS2 (0x08)
+#define GPIO_PAR_IRQL_IRQ2_USB1_VBUS_OC (0x04)
+#define GPIO_PAR_IRQL_IRQ2_GPIO (0x00)
+
+#define GPIO_PAR_DSPI0_SIN(x) (((x)&0x03)<<6)
+#define GPIO_PAR_DSPI0_SIN_MASK (0x3F)
+#define GPIO_PAR_DSPI0_SIN_DSPI0SIN (0xC0)
+#define GPIO_PAR_DSPI0_SIN_SBF_DI (0xC0)
+#define GPIO_PAR_DSPI0_SIN_U3RXD (0x80)
+#define GPIO_PAR_DSPI0_SIN_SDHC_CMD (0x40)
+#define GPIO_PAR_DSPI0_SIN_GPIO (0x00)
+#define GPIO_PAR_DSPI0_SOUT(x) (((x)&0x03)<<4)
+#define GPIO_PAR_DSPI0_SOUT_MASK (0xCF)
+#define GPIO_PAR_DSPI0_SOUT_DSPI0SOUT (0x30)
+#define GPIO_PAR_DSPI0_SOUT_SBF_DO (0x30)
+#define GPIO_PAR_DSPI0_SOUT_U3TXD (0x20)
+#define GPIO_PAR_DSPI0_SOUT_SDHC_DAT0 (0x10)
+#define GPIO_PAR_DSPI0_SOUT_GPIO (0x00)
+#define GPIO_PAR_DSPI0_SCK(x) (((x)&0x03)<<2)
+#define GPIO_PAR_DSPI0_SCK_MASK (0xF3)
+#define GPIO_PAR_DSPI0_SCK_DSPI0SCK (0x0C)
+#define GPIO_PAR_DSPI0_SCK_SBF_CK (0x0C)
+#define GPIO_PAR_DSPI0_SCK_I2C3SCL (0x08)
+#define GPIO_PAR_DSPI0_SCK_SDHC_CLK (0x04)
+#define GPIO_PAR_DSPI0_SCK_GPIO (0x00)
+#define GPIO_PAR_DSPI0_PCS0(x) ((x)&0x03)
+#define GPIO_PAR_DSPI0_PCS0_MASK (0xFC)
+#define GPIO_PAR_DSPI0_PCS0_DSPI0PCS0 (0x03)
+#define GPIO_PAR_DSPI0_PCS0_SS (0x03)
+#define GPIO_PAR_DSPI0_PCS0_I2C3SDA (0x02)
+#define GPIO_PAR_DSPI0_PCS0_SDHC_DAT3 (0x01)
+#define GPIO_PAR_DSPI0_PCS0_GPIO (0x00)
+
+#define GPIO_PAR_DSPIOW_DSPI0PSC1 (0x80)
+#define GPIO_PAR_DSPIOW_SBF_CS (0x80)
+#define GPIO_PAR_DSPIOW_OWDAT (((x)&0x03)<<4)
+#define GPIO_PAR_DSPIOW_OWDAT_MASK (0xCF)
+#define GPIO_PAR_DSPIOW_OWDAT_OWDAT (0x30)
+#define GPIO_PAR_DSPIOW_OWDAT_DACK0 (0x20)
+#define GPIO_PAR_DSPIOW_OWDAT_GPIO (0x00)
+
+#define GPIO_PAR_TIMER_T3IN(x) (((x)&0x03)<<6)
+#define GPIO_PAR_TIMER_T3IN_MASK (0x3F)
+#define GPIO_PAR_TIMER_T3IN_T3IN (0xC0)
+#define GPIO_PAR_TIMER_T3IN_EXTA3 (0xC0)
+#define GPIO_PAR_TIMER_T3IN_T3OUT (0x80)
+#define GPIO_PAR_TIMER_T3IN_USB0_VBUSEN (0x40)
+#define GPIO_PAR_TIMER_T3IN_ULIPI_DIR (0x40)
+#define GPIO_PAR_TIMER_T3IN_GPIO (0x00)
+#define GPIO_PAR_TIMER_T2IN(x) (((x)&0x03)<<4)
+#define GPIO_PAR_TIMER_T2IN_MASK (0xCF)
+#define GPIO_PAR_TIMER_T2IN_T2IN (0x30)
+#define GPIO_PAR_TIMER_T2IN_EXTA2 (0x30)
+#define GPIO_PAR_TIMER_T2IN_T2OUT (0x20)
+#define GPIO_PAR_TIMER_T2IN_SDHC_DAT2 (0x10)
+#define GPIO_PAR_TIMER_T2IN_GPIO (0x00)
+#define GPIO_PAR_TIMER_T1IN(x) (((x)&0x03)<<2)
+#define GPIO_PAR_TIMER_T1IN_MASK (0xF3)
+#define GPIO_PAR_TIMER_T1IN_T1IN (0x0C)
+#define GPIO_PAR_TIMER_T1IN_EXTA1 (0x0C)
+#define GPIO_PAR_TIMER_T1IN_T1OUT (0x08)
+#define GPIO_PAR_TIMER_T1IN_SDHC_DAT1 (0x04)
+#define GPIO_PAR_TIMER_T1IN_GPIO (0x00)
+#define GPIO_PAR_TIMER_T0IN(x) ((x)&0x03)
+#define GPIO_PAR_TIMER_T0IN_MASK (0xFC)
+#define GPIO_PAR_TIMER_T0IN_T0IN (0x03)
+#define GPIO_PAR_TIMER_T0IN_EXTA0 (0x03)
+#define GPIO_PAR_TIMER_T0IN_T0OUT (0x02)
+#define GPIO_PAR_TIMER_T0IN_USBO_VBUSOC (0x01)
+#define GPIO_PAR_TIMER_T0IN_ULPI_NXT (0x01)
+#define GPIO_PAR_TIMER_T0IN_GPIO (0x00)
+
+#define GPIO_PAR_UART2_U2CTS(x) (((x)&0x03)<<6)
+#define GPIO_PAR_UART2_U2CTS_MASK (0x3F)
+#define GPIO_PAR_UART2_U2CTS_U2CTS (0xC0)
+#define GPIO_PAR_UART2_U2CTS_U6TXD (0x80)
+#define GPIO_PAR_UART2_U2CTS_SSI1_BCLK (0x40)
+#define GPIO_PAR_UART2_U2CTS_GPIO (0x00)
+#define GPIO_PAR_UART2_U2RTS(x) (((x)&0x03)<<4)
+#define GPIO_PAR_UART2_U2RTS_MASK (0xCF)
+#define GPIO_PAR_UART2_U2RTS_U2RTS (0x30)
+#define GPIO_PAR_UART2_U2RTS_U6RXD (0x20)
+#define GPIO_PAR_UART2_U2RTS_SSI1_FS (0x10)
+#define GPIO_PAR_UART2_U2RTS_GPIO (0x00)
+#define GPIO_PAR_UART2_U2RXD(x) (((x)&0x03)<<2)
+#define GPIO_PAR_UART2_U2RXD_MASK (0xF3)
+#define GPIO_PAR_UART2_U2RXD_U2RXD (0x0C)
+#define GPIO_PAR_UART2_U2RXD_PWM_A3 (0x08)
+#define GPIO_PAR_UART2_U2RXD_SSI1_RXD (0x04)
+#define GPIO_PAR_UART2_U2RXD_GPIO (0x00)
+#define GPIO_PAR_UART2_U2TXD(x) ((x)&0x03)
+#define GPIO_PAR_UART2_U2TXD_MASK (0xFC)
+#define GPIO_PAR_UART2_U2TXD_U2TXD (0x03)
+#define GPIO_PAR_UART2_U2TXD_PWM_B3 (0x02)
+#define GPIO_PAR_UART2_U2TXD_SSI1_TXD (0x01)
+#define GPIO_PAR_UART2_U2TXD_GPIO (0x00)
+
+#define GPIO_PAR_UART1_U1CTS(x) (((x)&0x03)<<6)
+#define GPIO_PAR_UART1_U1CTS_MASK (0x3F)
+#define GPIO_PAR_UART1_U1CTS_U1CTS (0xC0)
+#define GPIO_PAR_UART1_U1CTS_U5TXD (0x80)
+#define GPIO_PAR_UART1_U1CTS_DSPI3_SCK (0x40)
+#define GPIO_PAR_UART1_U1CTS_GPIO (0x00)
+#define GPIO_PAR_UART1_U1RTS(x) (((x)&0x03)<<4)
+#define GPIO_PAR_UART1_U1RTS_MASK (0xCF)
+#define GPIO_PAR_UART1_U1RTS_U1RTS (0x30)
+#define GPIO_PAR_UART1_U1RTS_U5RXD (0x20)
+#define GPIO_PAR_UART1_U1RTS_DSPI3_PCS0 (0x10)
+#define GPIO_PAR_UART1_U1RTS_GPIO (0x00)
+#define GPIO_PAR_UART1_U1RXD(x) (((x)&0x03)<<2)
+#define GPIO_PAR_UART1_U1RXD_MASK (0xF3)
+#define GPIO_PAR_UART1_U1RXD_U1RXD (0x0C)
+#define GPIO_PAR_UART1_U1RXD_I2C5SDA (0x08)
+#define GPIO_PAR_UART1_U1RXD_DSPI3_SIN (0x04)
+#define GPIO_PAR_UART1_U1RXD_GPIO (0x00)
+#define GPIO_PAR_UART1_U1TXD(x) ((x)&0x03)
+#define GPIO_PAR_UART1_U1TXD_MASK (0xFC)
+#define GPIO_PAR_UART1_U1TXD_U1TXD (0x03)
+#define GPIO_PAR_UART1_U1TXD_I2C5SCL (0x02)
+#define GPIO_PAR_UART1_U1TXD_DSPI3_SOUT (0x01)
+#define GPIO_PAR_UART1_U1TXD_GPIO (0x00)
+
+#define GPIO_PAR_UART0_U0CTS(x) (((x)&0x03)<<6)
+#define GPIO_PAR_UART0_U0CTS_MASK (0x3F)
+#define GPIO_PAR_UART0_U0CTS_U0CTS (0xC0)
+#define GPIO_PAR_UART0_U0CTS_U4TXD (0x80)
+#define GPIO_PAR_UART0_U0CTS_DSPI2_SCK (0x40)
+#define GPIO_PAR_UART0_U0CTS_GPIO (0x00)
+#define GPIO_PAR_UART0_U0RTS(x) (((x)&0x03)<<4)
+#define GPIO_PAR_UART0_U0RTS_MASK (0xCF)
+#define GPIO_PAR_UART0_U0RTS_U0RTS (0x30)
+#define GPIO_PAR_UART0_U0RTS_U4RXD (0x20)
+#define GPIO_PAR_UART0_U0RTS_DSPI2_PCS0 (0x10)
+#define GPIO_PAR_UART0_U0RTS_GPIO (0x00)
+#define GPIO_PAR_UART0_U0RXD(x) (((x)&0x03)<<2)
+#define GPIO_PAR_UART0_U0RXD_MASK (0xF3)
+#define GPIO_PAR_UART0_U0RXD_U0RXD (0x0C)
+#define GPIO_PAR_UART0_U0RXD_I2C4SDA (0x08)
+#define GPIO_PAR_UART0_U0RXD_DSPI2_SIN (0x04)
+#define GPIO_PAR_UART0_U0RXD_GPIO (0x00)
+#define GPIO_PAR_UART0_U0TXD(x) ((x)&0x03)
+#define GPIO_PAR_UART0_U0TXD_MASK (0xFC)
+#define GPIO_PAR_UART0_U0TXD_U0TXD (0x03)
+#define GPIO_PAR_UART0_U0TXD_I2C4SCL (0x02)
+#define GPIO_PAR_UART0_U0TXD_DSPI2_SOUT (0x01)
+#define GPIO_PAR_UART0_U0TXD_GPIO (0x00)
+
+#define GPIO_PAR_SDHCH_DAT3(x) (((x)&0x03)<<6)
+#define GPIO_PAR_SDHCH_DAT3_MASK (0x3F)
+#define GPIO_PAR_SDHCH_DAT3_DAT3 (0xC0)
+#define GPIO_PAR_SDHCH_DAT3_PWM_A1 (0x80)
+#define GPIO_PAR_SDHCH_DAT3_DSPI1_PCS0 (0x40)
+#define GPIO_PAR_SDHCH_DAT3_GPIO (0x00)
+#define GPIO_PAR_SDHCH_DAT2(x) (((x)&0x03)<<4)
+#define GPIO_PAR_SDHCH_DAT2_MASK (0xCF)
+#define GPIO_PAR_SDHCH_DAT2_DAT2 (0x30)
+#define GPIO_PAR_SDHCH_DAT2_PWM_B1 (0x20)
+#define GPIO_PAR_SDHCH_DAT2_DSPI1_PCS2 (0x10)
+#define GPIO_PAR_SDHCH_DAT2_GPIO (0x00)
+#define GPIO_PAR_SDHCH_DAT1(x) (((x)&0x03)<<2)
+#define GPIO_PAR_SDHCH_DAT1_MASK (0xF3)
+#define GPIO_PAR_SDHCH_DAT1_DAT1 (0x0C)
+#define GPIO_PAR_SDHCH_DAT1_PWM_A2 (0x08)
+#define GPIO_PAR_SDHCH_DAT1_DSPI1_PCS1 (0x04)
+#define GPIO_PAR_SDHCH_DAT1_GPIO (0x00)
+#define GPIO_PAR_SDHCH_DAT0(x) ((x)&0x03)
+#define GPIO_PAR_SDHCH_DAT0_MASK (0xFC)
+#define GPIO_PAR_SDHCH_DAT0_DAT0 (0x03)
+#define GPIO_PAR_SDHCH_DAT0_PWM_B2 (0x02)
+#define GPIO_PAR_SDHCH_DAT0_DSPI1_SOUT (0x01)
+#define GPIO_PAR_SDHCH_DAT0_GPIO (0x00)
+
+#define GPIO_PAR_SDHCL_CMD(x) (((x)&0x03)<<2)
+#define GPIO_PAR_SDHCL_CMD_MASK (0xF3)
+#define GPIO_PAR_SDHCL_CMD_CMD (0x0C)
+#define GPIO_PAR_SDHCL_CMD_PWM_A0 (0x08)
+#define GPIO_PAR_SDHCL_CMD_DSPI1_SIN (0x04)
+#define GPIO_PAR_SDHCL_CMD_GPIO (0x00)
+#define GPIO_PAR_SDHCL_CLK(x) ((x)&0x03)
+#define GPIO_PAR_SDHCL_CLK_MASK (0xFC)
+#define GPIO_PAR_SDHCL_CLK_CLK (0x03)
+#define GPIO_PAR_SDHCL_CLK_PWM_B0 (0x02)
+#define GPIO_PAR_SDHCL_CLK_DSPI1_SCK (0x01)
+#define GPIO_PAR_SDHCL_CLK_GPIO (0x00)
+
+#define GPIO_PAR_SIMP0H_DAT(x) (((x)&0x03)<<6)
+#define GPIO_PAR_SIMP0H_DAT_MASK (0x3F)
+#define GPIO_PAR_SIMP0H_DAT_DAT (0xC0)
+#define GPIO_PAR_SIMP0H_DAT_PWM_FAULT2 (0x80)
+#define GPIO_PAR_SIMP0H_DAT_SDHC_DAT7 (0x40)
+#define GPIO_PAR_SIMP0H_DAT_GPIO (0x00)
+#define GPIO_PAR_SIMP0H_VEN(x) (((x)&0x03)<<4)
+#define GPIO_PAR_SIMP0H_VEN_MASK (0xCF)
+#define GPIO_PAR_SIMP0H_VEN_VEN (0x30)
+#define GPIO_PAR_SIMP0H_VEN_PWM_FAULT0 (0x20)
+#define GPIO_PAR_SIMP0H_VEN_GPIO (0x00)
+#define GPIO_PAR_SIMP0H_RST(x) (((x)&0x03)<<2)
+#define GPIO_PAR_SIMP0H_RST_MASK (0xF3)
+#define GPIO_PAR_SIMP0H_RST_RST (0x0C)
+#define GPIO_PAR_SIMP0H_RST_PWM_FORCE (0x08)
+#define GPIO_PAR_SIMP0H_RST_SDHC_DAT6 (0x04)
+#define GPIO_PAR_SIMP0H_RST_GPIO (0x00)
+#define GPIO_PAR_SIMP0H_PD(x) ((x)&0x03)
+#define GPIO_PAR_SIMP0H_PD_MASK (0xFC)
+#define GPIO_PAR_SIMP0H_PD_PD (0x03)
+#define GPIO_PAR_SIMP0H_PD_PWM_SYNC (0x02)
+#define GPIO_PAR_SIMP0H_PD_SDHC_DAT5 (0x01)
+#define GPIO_PAR_SIMP0H_PD_GPIO (0x00)
+
+#define GPIO_PAR_SIMP0L_CLK(x) ((x)&0x03)
+#define GPIO_PAR_SIMP0L_CLK_MASK (0xFC)
+#define GPIO_PAR_SIMP0L_CLK_CLK (0x03)
+#define GPIO_PAR_SIMP0L_CLK_PWM_FAULT1 (0x02)
+#define GPIO_PAR_SIMP0L_CLK_SDHC_DAT4 (0x01)
+#define GPIO_PAR_SIMP0L_CLK_GPIO (0x00)
+
+#define GPIO_PAR_SSI0H_RXD(x) (((x)&0x03)<<6)
+#define GPIO_PAR_SSI0H_RXD_MASK (0x3F)
+#define GPIO_PAR_SSI0H_RXD_RXD (0xC0)
+#define GPIO_PAR_SSI0H_RXD_I2C2SDA (0x80)
+#define GPIO_PAR_SSI0H_RXD_SIM1_VEN (0x40)
+#define GPIO_PAR_SSI0H_RXD_GPIO (0x00)
+#define GPIO_PAR_SSI0H_TXD(x) (((x)&0x03)<<4)
+#define GPIO_PAR_SSI0H_TXD_MASK (0xCF)
+#define GPIO_PAR_SSI0H_TXD_TXD (0x30)
+#define GPIO_PAR_SSI0H_TXD_I2C2SCL (0x20)
+#define GPIO_PAR_SSI0H_TXD_SIM1_DAT (0x10)
+#define GPIO_PAR_SSI0H_TXD_GPIO (0x00)
+#define GPIO_PAR_SSI0H_FS(x) (((x)&0x03)<<2)
+#define GPIO_PAR_SSI0H_FS_MASK (0xF3)
+#define GPIO_PAR_SSI0H_FS_FS (0x0C)
+#define GPIO_PAR_SSI0H_FS_U7TXD (0x08)
+#define GPIO_PAR_SSI0H_FS_SIM1_RST (0x04)
+#define GPIO_PAR_SSI0H_FS_GPIO (0x00)
+#define GPIO_PAR_SSI0H_MCLK(x) ((x)&0x03)
+#define GPIO_PAR_SSI0H_MCLK_MASK (0xFC)
+#define GPIO_PAR_SSI0H_MCLK_MCLK (0x03)
+#define GPIO_PAR_SSI0H_MCLK_SSI_CLKIN (0x02)
+#define GPIO_PAR_SSI0H_MCLK_SIM1_CLK (0x01)
+#define GPIO_PAR_SSI0H_MCLK_GPIO (0x00)
+
+#define GPIO_PAR_SSI0L_BCLK(x) ((x)&0x03)
+#define GPIO_PAR_SSI0L_BCLK_MASK (0xFC)
+#define GPIO_PAR_SSI0L_BCLK_BCLK (0x03)
+#define GPIO_PAR_SSI0L_BCLK_U7RXD (0x02)
+#define GPIO_PAR_SSI0L_BCLK_SIM1_PD (0x01)
+#define GPIO_PAR_SSI0L_BCLK_GPIO (0x00)
+
+#define GPIO_PAR_DEBUGH1_DAT3 (0x40)
+#define GPIO_PAR_DEBUGH1_DAT2 (0x10)
+#define GPIO_PAR_DEBUGH1_DAT1 (0x04)
+#define GPIO_PAR_DEBUGH1_DAT0 (0x01)
+
+#define GPIO_PAR_DEBUGH0_PST3 (0x40)
+#define GPIO_PAR_DEBUGH0_PST2 (0x10)
+#define GPIO_PAR_DEBUGH0_PST1 (0x04)
+#define GPIO_PAR_DEBUGH0_PST0 (0x01)
+
+#define GPIO_PODR_G4_VAL (0x01 << 4)
+#define GPIO_PODR_G4_MASK (0xff & ~GPIO_PODR_G4_VAL)
+#define GPIO_PDDR_G4_OUTPUT (0x01 << 4)
+#define GPIO_PDDR_G4_MASK (0xff & ~GPIO_PDDR_G4_OUTPUT)
+
+#define GPIO_PAR_DEBUGL_ALLPST (0x01)
+
+#define GPIO_PAR_FEC_FEC(x) ((x)&0x0F)
+#define GPIO_PAR_FEC_FEC_MASK (0xF0)
+#define GPIO_PAR_FEC_FEC_GPIO (0x0D)
+#define GPIO_PAR_FEC_FEC_RMII1 (0x0C)
+#define GPIO_PAR_FEC_FEC_RMII1FUL (0x0B)
+#define GPIO_PAR_FEC_FEC_RMII_ULPI (0x0A)
+#define GPIO_PAR_FEC_FEC_RMII0 (0x09)
+#define GPIO_PAR_FEC_FEC_RMII0FUL_ULPI (0x08)
+#define GPIO_PAR_FEC_FEC_RMII0FUL (0x07)
+#define GPIO_PAR_FEC_FEC_RMII0_1FUL (0x06)
+#define GPIO_PAR_FEC_FEC_RMII0FUL_1 (0x05) /* 0:Full 1: */
+/* Both 0&1: MDC, MDIO, COL & TXER - GPIO */
+#define GPIO_PAR_FEC_FEC_RMII0_1 (0x04)
+#define GPIO_PAR_FEC_FEC_RMII0FUL_1FUL (0x03)
+#define GPIO_PAR_FEC_FEC_MII (0x01) /* MDC & MDIO - GPIO */
+#define GPIO_PAR_FEC_FEC_MIIFUL (0x00)
+
+
+/* TC: Need to edit here.... */
+
+/* Mode Select Control */
+#define GPIO_MSCR_SDRAM_MSC(x) ((x)&0x03)
+#define GPIO_MSCR_SDRAM_MSC_MASK (0xFC)
+
+/* Slew Rate Control */
+
+#define GPIO_SRCR_FB3_FB3(x) ((x)&0x03)
+#define GPIO_SRCR_FB3_FB3_MASK (0xFC)
+
+#define GPIO_SRCR_FB2_FB2(x) ((x)&0x03)
+#define GPIO_SRCR_FB2_FB2_MASK (0xFC)
+
+#define GPIO_SRCR_FB1_FB1(x) ((x)&0x03)
+#define GPIO_SRCR_FB1_FB1_MASK (0xFC)
+
+#define GPIO_SRCR_FB4_FB5(x) (((x)&0x03)<<2)
+#define GPIO_SRCR_FB4_FB5_MASK (0xF3)
+#define GPIO_SRCR_FB4_FB4(x) ((x)&0x03)
+#define GPIO_SRCR_FB4_FB4_MASK (0xFC)
+
+#define GPIO_SRCR_DSPIOW_OWDAT(x) (((x)&0x03)<<4)
+#define GPIO_SRCR_DSPIOW_OWDAT_MASK (0xCF)
+#define GPIO_SRCR_DSPIOW_DSPI0(x) ((x)&0x03)
+#define GPIO_SRCR_DSPIOW_DSPI0_MASK (0xFC)
+
+#define GPIO_SRCR_CANI2C_CAN1(x) (((x)&0x03)<<2)
+#define GPIO_SRCR_CANI2C_CAN1_MASK (0xF3)
+#define GPIO_SRCR_CANI2C_I2C0(x) ((x)&0x03)
+#define GPIO_SRCR_CANI2C_I2C0_MASK (0xFC)
+
+#define GPIO_SRCR_IRQ0_IRQ0(x) ((x)&0x03)
+#define GPIO_SRCR_IRQ0_IRQ0_MASK (0xFC)
+
+#define GPIO_SRCR_TIMER_TMR3(x) (((x)&0x03)<<6)
+#define GPIO_SRCR_TIMER_TMR3_MASK (0x3F)
+#define GPIO_SRCR_TIMER_TMR2(x) (((x)&0x03)<<4)
+#define GPIO_SRCR_TIMER_TMR2_MASK (0xCF)
+#define GPIO_SRCR_TIMER_TMR1(x) (((x)&0x03)<<2)
+#define GPIO_SRCR_TIMER_TMR1_MASK (0xF3)
+#define GPIO_SRCR_TIMER_TMR0(x) ((x)&0x03)
+#define GPIO_SRCR_TIMER_TMR0_MASK (0xFC)
+
+#define GPIO_SRCR_UART_U2(x) (((x)&0x03)<<4)
+#define GPIO_SRCR_UART_U2_MASK (0xCF)
+#define GPIO_SRCR_UART_U1(x) (((x)&0x03)<<2)
+#define GPIO_SRCR_UART_U1_MASK (0xF3)
+#define GPIO_SRCR_UART_U0(x) ((x)&0x03)
+#define GPIO_SRCR_UART_U0_MASK (0xFC)
+
+#define GPIO_SRCR_FEC_RMII0(x) (((x)&0x03)<<2)
+#define GPIO_SRCR_FEC_RMII0_MASK (0xF3)
+#define GPIO_SRCR_FEC_RMII1(x) ((x)&0x03)
+#define GPIO_SRCR_FEC_RMII1_MASK (0xFC)
+
+#define GPIO_SRCR_SDHC_SDHC(x) ((x)&0x03)
+#define GPIO_SRCR_SDHC_SDHC_MASK (0xFC)
+
+#define GPIO_SRCR_SIM0_SIMP0(x) ((x)&0x03)
+#define GPIO_SRCR_SIM0_SIMP0_MASK (0xFC)
+
+#define GPIO_SRCR_SSI0_SSI0(x) ((x)&0x03)
+#define GPIO_SRCR_SSI0_SSI0_MASK (0xFC)
+
+#define GPIO_PCR_URTS_U2 (0x0004)
+#define GPIO_PCR_URTS_U1 (0x0002)
+#define GPIO_PCR_URTS_U0 (0x0001)
+
+#define GPIO_PCR_UCTS_U2 (0x0004)
+#define GPIO_PCR_UCTS_U1 (0x0002)
+#define GPIO_PCR_UCTS_U0 (0x0001)
+
+#define GPIO_UTXD_WOM_U9 (0x0200)
+#define GPIO_UTXD_WOM_U8 (0x0100)
+#define GPIO_UTXD_WOM_U7 (0x0080)
+#define GPIO_UTXD_WOM_U6 (0x0040)
+#define GPIO_UTXD_WOM_U5 (0x0020)
+#define GPIO_UTXD_WOM_U4 (0x0010)
+#define GPIO_UTXD_WOM_U3 (0x0008)
+#define GPIO_UTXD_WOM_U2 (0x0004)
+#define GPIO_UTXD_WOM_U1 (0x0002)
+#define GPIO_UTXD_WOM_U0 (0x0001)
+
+#define GPIO_URXD_WOM_U9(x) (((x)&3)<<18)
+#define GPIO_URXD_WOM_U9_MASK (0xFFF3FFFF)
+#define GPIO_URXD_WOM_U8(x) (((x)&3)<<16)
+#define GPIO_URXD_WOM_U8_MASK (0xFFFCFFFF)
+#define GPIO_URXD_WOM_U7(x) (((x)&3)<<14)
+#define GPIO_URXD_WOM_U7_MASK (0xFFFF3FFF)
+#define GPIO_URXD_WOM_U6(x) (((x)&3)<<12)
+#define GPIO_URXD_WOM_U6_MASK (0xFFFFCFFF)
+#define GPIO_URXD_WOM_U5(x) (((x)&3)<<10)
+#define GPIO_URXD_WOM_U5_MASK (0xFFFFF3FF)
+#define GPIO_URXD_WOM_U4(x) (((x)&3)<<8)
+#define GPIO_URXD_WOM_U4_MASK (0xFFFFFCFF)
+#define GPIO_URXD_WOM_U3(x) (((x)&3)<<6)
+#define GPIO_URXD_WOM_U3_MASK (0xFFFFFF3F)
+#define GPIO_URXD_WOM_U2(x) (((x)&3)<<4)
+#define GPIO_URXD_WOM_U2_MASK (0xFFFFFFCF)
+#define GPIO_URXD_WOM_U1(x) (((x)&3)<<2)
+#define GPIO_URXD_WOM_U1_MASK (0xFFFFFFF3)
+#define GPIO_URXD_WOM_U0(x) ((x)&3)
+#define GPIO_URXD_WOM_U0_MASK (0xFFFFFFFC)
+
+#define GPIO_HCR1_PG4_0(x) (((x)&0x1F)<<27)
+#define GPIO_HCR1_PG4_0_MASK (0x07FFFFFF)
+#define GPIO_HCR1_PF7_3(x) (((x)&0x1F)<<22)
+#define GPIO_HCR1_PF7_3_MASK (0xF83FFFFF)
+#define GPIO_HCR1_PE6_0(x) (((x)&0x7F)<<15)
+#define GPIO_HCR1_PE6_0_MASK (0xFFC07FFF)
+#define GPIO_HCR1_PD7_3(x) (((x)&0x1F)<<10)
+#define GPIO_HCR1_PD7_3_MASK (0xFFFF83FF)
+#define GPIO_HCR1_PC7_1(x) (((x)&0x7F)<<3)
+#define GPIO_HCR1_PC7_1_MASK (0xFFFFFC07)
+#define GPIO_HCR1_PB2_0(x) ((x)&7)
+#define GPIO_HCR1_PB2_0_MASK (0xFFFFFFF8)
+
+#define GPIO_HCR0_PK3 (0x00000400)
+#define GPIO_HCR0_PK0 (0x00000200)
+#define GPIO_HCR0_PD2_0(x) (((x)&7)<<6)
+#define GPIO_HCR0_PD2_0_MASK (0xFFFFFE3F)
+#define GPIO_HCR0_PE7 (0x00000020)
+#define GPIO_HCR0_PH7_3(x) ((x)&0x1F)
+#define GPIO_HCR0_PH7_3_MASK(x) (0xFFFFFFE0)
+
+/* SDRAM Controller (SDRAMC) */
+
+/* Phase Locked Loop (PLL) */
+#define PLL_CR_LOCIRQ (0x00040000)
+#define PLL_CR_LOCRE (0x00020000)
+#define PLL_CR_LOCEN (0x00010000)
+#define PLL_CR_LOLIRQ (0x00004000)
+#define PLL_CR_LOLRE (0x00002000)
+#define PLL_CR_LOLEN (0x00001000)
+#define PLL_CR_REFDIV(x) (((x)&7)<<8)
+#define PLL_CR_REFDIV_MASK (0xFFFFF8FF)
+#define PLL_CR_FBKDIV(x) ((x)&0x3F)
+#define PLL_CR_FBKDIV_MASK (0xFFFFFFC0)
+#define PLL_CR_FBKDIV_BITS (0x3F)
+
+#define PLL_DR_OUTDIV5(x) (((x)&0x1F)<<21)
+#define PLL_DR_OUTDIV5_MASK (0xFC1FFFFF)
+#define PLL_DR_OUTDIV5_BITS (0x03E00000)
+#define PLL_DR_OUTDIV4(x) (((x)&0x1F)<<16)
+#define PLL_DR_OUTDIV4_MASK (0xFFE0FFFF)
+#define PLL_DR_OUTDIV4_BITS (0x001F0000)
+#define PLL_DR_OUTDIV3(x) (((x)&0x1F)<<10)
+#define PLL_DR_OUTDIV3_MASK (0xFFFF83FF)
+#define PLL_DR_OUTDIV3_BITS (0x00007C00)
+#define PLL_DR_OUTDIV2(x) (((x)&0x1F)<<5)
+#define PLL_DR_OUTDIV2_MASK (0xFFFFFC1F)
+#define PLL_DR_OUTDIV2_BITS (0x000003E0)
+#define PLL_DR_OUTDIV1(x) ((x)&0x1F)
+#define PLL_DR_OUTDIV1_MASK (0xFFFFFFE0)
+#define PLL_DR_OUTDIV1_BITS (0x0000001F)
+
+#define PLL_SR_LOCF (0x00000200)
+#define PLL_SR_LOC (0x00000100)
+#define PLL_SR_LOLF (0x00000040)
+#define PLL_SR_LOCKS (0x00000020)
+#define PLL_SR_LOCK (0x00000010)
+#define PLL_PSR_LOCK PLL_SR_LOCK /* compatible with 5x */
+#define PLL_SR_MODE(x) ((x)&7)
+#define PLL_SR_MODE_MASK (0xFFFFFFF8)
+
+#endif /* __MCF5441X__ */
unsigned long bi_vcofreq; /* vco Freq in MHz */
unsigned long bi_flbfreq; /* Flexbus Freq in MHz */
#endif
- unsigned long bi_baudrate; /* Console Baudrate */
+ unsigned int bi_baudrate; /* Console Baudrate */
} bd_t;
#endif /* __ASSEMBLY__ */
#include <command.h>
#include <malloc.h>
#include <stdio_dev.h>
+#include <linux/compiler.h>
#include <asm/immap.h>
*/
void board_init_r (gd_t *id, ulong dest_addr)
{
- char *s;
+ char *s __maybe_unused;
bd_t *bd;
#ifndef CONFIG_ENV_IS_NOWHERE
/*
* We have to relocate the command table manually
*/
- fixup_cmdtable(&__u_boot_cmd_start,
- (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
+ fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+ ll_entry_count(cmd_tbl_t, cmd));
#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
/* there are some other pointer constants we must deal with */
void dcache_disable(void) {
#ifdef XILINX_USE_DCACHE
-#ifdef XILINX_DCACHE_BYTE_SIZE
flush_cache(0, XILINX_DCACHE_BYTE_SIZE);
-#else
-#warning please rebuild BSPs and update configuration
- flush_cache(0, 32768);
-#endif
#endif
MSRCLR(0x80);
}
rsubi r8, r10, 0x26
sh r6, r0, r8
+ /* Flush cache before enable cache */
+ addik r5, r0, 0
+ addik r6, r0, XILINX_DCACHE_BYTE_SIZE
+flush: bralid r15, flush_cache
+ nop
+
/* enable instruction and data cache */
mfs r12, rmsr
ori r12, r12, 0xa0
.data ALIGN(0x4):
{
__data_start = .;
+#ifdef CONFIG_OF_EMBED
dts/libdts.o (.data)
+#endif
*(.data)
__data_end = .;
}
- .u_boot_cmd ALIGN(0x4):
- {
- . = .;
- __u_boot_cmd_start = .;
- *(.u_boot_cmd)
- __u_boot_cmd_end = .;
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
}
.bss ALIGN(0x4):
#define ext2_find_first_zero_bit(addr, size) \
ext2_find_next_zero_bit((addr), (size), 0)
-extern __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+static inline unsigned long ext2_find_next_zero_bit(void *addr,
+ unsigned long size, unsigned long offset)
{
unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
unsigned long result = offset & ~31UL;
#ifdef __GNUC__
-/* This is effectively a dupe of the arch-independent byteswap
- code in include/linux/byteorder/swab.h, however we force a cast
- of the result up to 32 bits. This in turn forces the compiler
- to explicitly clear the high 16 bits, which it wasn't doing otherwise.
-
- I think this is a symptom of a bug in mb-gcc. JW 20040303
-*/
-
-
-static __inline__ __u16 ___arch__swab16 (__u16 half_word)
-{
- /* 32 bit temp to cast result, forcing clearing of high word */
- __u32 temp;
-
- temp = ((half_word & 0x00FFU) << 8) | ((half_word & 0xFF00U) >> 8);
-
- return (__u16) temp;
-}
-
-#define __arch__swab16(x) ___arch__swab16(x)
-
-/* Microblaze has no arch-specific endian conversion insns */
-
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __BYTEORDER_HAS_U64__
# define __SWAB_64_THRU_32__
typedef struct global_data {
bd_t *bd;
unsigned long flags;
- unsigned long baudrate;
+ unsigned int baudrate;
unsigned long have_console; /* serial_init() was called */
#ifdef CONFIG_PRE_CONSOLE_BUFFER
unsigned long precon_buf_idx; /* Pre-Console buffer index */
#ifndef __MICROBLAZE_POSIX_TYPES_H__
#define __MICROBLAZE_POSIX_TYPES_H__
-#include <asm/bitops.h>
-
-
typedef unsigned int __kernel_dev_t;
typedef unsigned long __kernel_ino_t;
typedef unsigned long long __kernel_ino64_t;
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
- unsigned long bi_baudrate; /* Console Baudrate */
+ unsigned int bi_baudrate; /* Console Baudrate */
} bd_t;
/* For image.h:image_check_target_arch() */
#endif
#ifdef XILINX_USE_DCACHE
-#ifdef XILINX_DCACHE_BYTE_SIZE
flush_cache(0, XILINX_DCACHE_BYTE_SIZE);
-#else
-#warning please rebuild BSPs and update configuration
- flush_cache(0, 32768);
-#endif
#endif
/*
* Linux Kernel Parameters (passing device tree):
LIB = $(obj)lib$(SOC).o
-COBJS = au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o
+COBJS = au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o au1x00_ide.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
/*
- * SGS M48-T59Y TOD/NVRAM Driver
- *
- * (C) Copyright 2000
+ * (C) Copyright 2000-2011
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp.
- *
- * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp.
- *
* See file CREDITS for list of people who contributed to this
* project.
*
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
+ *
*/
-#ifndef __M48_T59_Y_H
-#define __M48_T59_Y_H
-
-/*
- * M48 T59Y -Timekeeping Battery backed SRAM.
- */
-
-int m48_tod_init(void);
-
-int m48_tod_set(int year,
- int month,
- int day,
- int hour,
- int minute,
- int second);
-
-int m48_tod_get(int *year,
- int *month,
- int *day,
- int *hour,
- int *minute,
- int *second);
-
-int m48_tod_get_second(void);
-
-void m48_watchdog_arm(int usec);
+#include <common.h>
+#include <ide.h>
-#endif /*!__M48_T59_Y_H */
+/* AU1X00 swaps data in big-endian mode, enforce little-endian function */
+void ide_input_swap_data(int dev, ulong *sect_buf, int words)
+{
+ ide_input_data(dev, sect_buf, words);
+}
*uart_tx = (u32)c;
}
-static void au1x00_serial_puts(const char *s)
-{
- while (*s)
- serial_putc(*s++);
-}
-
static int au1x00_serial_getc(void)
{
volatile u32 *uart_rx = (volatile u32*)(UART0_ADDR+UART_RX);
.stop = NULL,
.setbrg = au1x00_serial_setbrg,
.putc = au1x00_serial_putc,
- .puts = au1x00_serial_puts,
+ .puts = default_serial_puts,
.getc = au1x00_serial_getc,
.tstc = au1x00_serial_tstc,
};
/* clear tag to invalidate */
PTR_LI t0, INDEX_BASE
PTR_ADDU t1, t0, a1
-1: cache_op Index_Store_Tag_I t0
+1: cache_op INDEX_STORE_TAG_I t0
PTR_ADDU t0, a2
bne t0, t1, 1b
/* fill once, so data field parity is correct */
PTR_LI t0, INDEX_BASE
-2: cache_op Fill t0
+2: cache_op FILL t0
PTR_ADDU t0, a2
bne t0, t1, 2b
/* invalidate again - prudent but not strictly neccessary */
PTR_LI t0, INDEX_BASE
-1: cache_op Index_Store_Tag_I t0
+1: cache_op INDEX_STORE_TAG_I t0
PTR_ADDU t0, a2
bne t0, t1, 1b
9: jr ra
/* clear all tags */
PTR_LI t0, INDEX_BASE
PTR_ADDU t1, t0, a1
-1: cache_op Index_Store_Tag_D t0
+1: cache_op INDEX_STORE_TAG_D t0
PTR_ADDU t0, a2
bne t0, t1, 1b
/* load from each line (in cached space) */
bne t0, t1, 2b
/* clear all tags */
PTR_LI t0, INDEX_BASE
-1: cache_op Index_Store_Tag_D t0
+1: cache_op INDEX_STORE_TAG_D t0
PTR_ADDU t0, a2
bne t0, t1, 1b
9: jr ra
return;
while (1) {
- cache_op(Hit_Writeback_Inv_D, addr);
- cache_op(Hit_Invalidate_I, addr);
+ cache_op(HIT_WRITEBACK_INV_D, addr);
+ cache_op(HIT_INVALIDATE_I, addr);
if (addr == aend)
break;
addr += lsize;
unsigned long aend = (stop - 1) & ~(lsize - 1);
while (1) {
- cache_op(Hit_Writeback_Inv_D, addr);
+ cache_op(HIT_WRITEBACK_INV_D, addr);
if (addr == aend)
break;
addr += lsize;
unsigned long aend = (stop - 1) & ~(lsize - 1);
while (1) {
- cache_op(Hit_Invalidate_D, addr);
+ cache_op(HIT_INVALIDATE_D, addr);
if (addr == aend)
break;
addr += lsize;
}
}
-static void asc_serial_puts(const char *s)
-{
- while (*s)
- {
- serial_putc (*s++);
- }
-}
-
static int asc_serial_getc(void)
{
ulong symbol_mask;
.stop = NULL,
.setbrg = asc_serial_setbrg,
.putc = asc_serial_putc,
- .puts = asc_serial_puts,
+ .puts = default_serial_puts,
.getc = asc_serial_getc,
.tstc = asc_serial_tstc,
};
#
-# (C) Copyright 2000-2006
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
LIB = $(obj)lib$(CPU).o
START = start.o
-COBJS = cpu.o speed.o timer.o
+COBJS-y = cpu.o interrupts.o time.o cache.o
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
START := $(addprefix $(obj),$(START))
all: $(obj).depend $(START) $(LIB)
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
-
-#########################################################################
--- /dev/null
+/*
+ * Cache-handling routined for MIPS CPUs
+ *
+ * Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/cacheops.h>
+
+#define RA t9
+
+/*
+ * 16kB is the maximum size of instruction and data caches on MIPS 4K,
+ * 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience.
+ *
+ * Note that the above size is the maximum size of primary cache. U-Boot
+ * doesn't have L2 cache support for now.
+ */
+#define MIPS_MAX_CACHE_SIZE 0x10000
+
+#define INDEX_BASE CKSEG0
+
+ .macro cache_op op addr
+ .set push
+ .set noreorder
+ .set mips3
+ cache \op, 0(\addr)
+ .set pop
+ .endm
+
+ .macro f_fill64 dst, offset, val
+ LONG_S \val, (\offset + 0 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 1 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 2 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 3 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 4 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 5 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 6 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 7 * LONGSIZE)(\dst)
+#if LONGSIZE == 4
+ LONG_S \val, (\offset + 8 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 9 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 10 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 11 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 12 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 13 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 14 * LONGSIZE)(\dst)
+ LONG_S \val, (\offset + 15 * LONGSIZE)(\dst)
+#endif
+ .endm
+
+/*
+ * mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz)
+ */
+LEAF(mips_init_icache)
+ blez a1, 9f
+ mtc0 zero, CP0_TAGLO
+ /* clear tag to invalidate */
+ PTR_LI t0, INDEX_BASE
+ PTR_ADDU t1, t0, a1
+1: cache_op INDEX_STORE_TAG_I t0
+ PTR_ADDU t0, a2
+ bne t0, t1, 1b
+ /* fill once, so data field parity is correct */
+ PTR_LI t0, INDEX_BASE
+2: cache_op FILL t0
+ PTR_ADDU t0, a2
+ bne t0, t1, 2b
+ /* invalidate again - prudent but not strictly neccessary */
+ PTR_LI t0, INDEX_BASE
+1: cache_op INDEX_STORE_TAG_I t0
+ PTR_ADDU t0, a2
+ bne t0, t1, 1b
+9: jr ra
+ END(mips_init_icache)
+
+/*
+ * mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz)
+ */
+LEAF(mips_init_dcache)
+ blez a1, 9f
+ mtc0 zero, CP0_TAGLO
+ /* clear all tags */
+ PTR_LI t0, INDEX_BASE
+ PTR_ADDU t1, t0, a1
+1: cache_op INDEX_STORE_TAG_D t0
+ PTR_ADDU t0, a2
+ bne t0, t1, 1b
+ /* load from each line (in cached space) */
+ PTR_LI t0, INDEX_BASE
+2: LONG_L zero, 0(t0)
+ PTR_ADDU t0, a2
+ bne t0, t1, 2b
+ /* clear all tags */
+ PTR_LI t0, INDEX_BASE
+1: cache_op INDEX_STORE_TAG_D t0
+ PTR_ADDU t0, a2
+ bne t0, t1, 1b
+9: jr ra
+ END(mips_init_dcache)
+
+/*
+ * mips_cache_reset - low level initialisation of the primary caches
+ *
+ * This routine initialises the primary caches to ensure that they have good
+ * parity. It must be called by the ROM before any cached locations are used
+ * to prevent the possibility of data with bad parity being written to memory.
+ *
+ * To initialise the instruction cache it is essential that a source of data
+ * with good parity is available. This routine will initialise an area of
+ * memory starting at location zero to be used as a source of parity.
+ *
+ * RETURNS: N/A
+ *
+ */
+NESTED(mips_cache_reset, 0, ra)
+ move RA, ra
+ li t2, CONFIG_SYS_ICACHE_SIZE
+ li t3, CONFIG_SYS_DCACHE_SIZE
+ li t8, CONFIG_SYS_CACHELINE_SIZE
+
+ li v0, MIPS_MAX_CACHE_SIZE
+
+ /*
+ * Now clear that much memory starting from zero.
+ */
+ PTR_LI a0, CKSEG1
+ PTR_ADDU a1, a0, v0
+2: PTR_ADDIU a0, 64
+ f_fill64 a0, -64, zero
+ bne a0, a1, 2b
+
+ /*
+ * The caches are probably in an indeterminate state,
+ * so we force good parity into them by doing an
+ * invalidate, load/fill, invalidate for each line.
+ */
+
+ /*
+ * Assume bottom of RAM will generate good parity for the cache.
+ */
+
+ /*
+ * Initialize the I-cache first,
+ */
+ move a1, t2
+ move a2, t8
+ PTR_LA v1, mips_init_icache
+ jalr v1
+
+ /*
+ * then initialize D-cache.
+ */
+ move a1, t3
+ move a2, t8
+ PTR_LA v1, mips_init_dcache
+ jalr v1
+
+ jr RA
+ END(mips_cache_reset)
+
+/*
+ * dcache_status - get cache status
+ *
+ * RETURNS: 0 - cache disabled; 1 - cache enabled
+ *
+ */
+LEAF(dcache_status)
+ mfc0 t0, CP0_CONFIG
+ li t1, CONF_CM_UNCACHED
+ andi t0, t0, CONF_CM_CMASK
+ move v0, zero
+ beq t0, t1, 2f
+ li v0, 1
+2: jr ra
+ END(dcache_status)
+
+/*
+ * dcache_disable - disable cache
+ *
+ * RETURNS: N/A
+ *
+ */
+LEAF(dcache_disable)
+ mfc0 t0, CP0_CONFIG
+ li t1, -8
+ and t0, t0, t1
+ ori t0, t0, CONF_CM_UNCACHED
+ mtc0 t0, CP0_CONFIG
+ jr ra
+ END(dcache_disable)
+
+/*
+ * dcache_enable - enable cache
+ *
+ * RETURNS: N/A
+ *
+ */
+LEAF(dcache_enable)
+ mfc0 t0, CP0_CONFIG
+ ori t0, CONF_CM_CMASK
+ xori t0, CONF_CM_CMASK
+ ori t0, CONF_CM_CACHABLE_NONCOHERENT
+ mtc0 t0, CP0_CONFIG
+ jr ra
+ END(dcache_enable)
#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
#
# See file CREDITS for list of people who contributed to this
# project.
# MA 02111-1307 USA
#
-PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
-
-PLATFORM_CPPFLAGS += -march=armv4
-# =========================================================================
#
-# Supply options according to compiler version
+# Default optimization level for MIPS64
+#
+# Note: Toolchains with binutils prior to v2.16
+# are no longer supported by U-Boot MIPS tree!
#
-# ========================================================================
-PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
-PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
+MIPSFLAGS = -march=mips64
+
+PLATFORM_CPPFLAGS += $(MIPSFLAGS)
+PLATFORM_CPPFLAGS += -mabi=64 -DCONFIG_64BIT
+ifdef CONFIG_SYS_BIG_ENDIAN
+PLATFORM_LDFLAGS += -m elf64btsmip
+else
+PLATFORM_LDFLAGS += -m elf64ltsmip
+endif
+
+CONFIG_STANDALONE_LOAD_ADDR ?= 0xffffffff80200000 -T mips64.lds
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/mipsregs.h>
+#include <asm/cacheops.h>
+#include <asm/reboot.h>
+
+#define cache_op(op, addr) \
+ __asm__ __volatile__( \
+ " .set push\n" \
+ " .set noreorder\n" \
+ " .set mips64\n" \
+ " cache %0, %1\n" \
+ " .set pop\n" \
+ : \
+ : "i" (op), "R" (*(unsigned char *)(addr)))
+
+void __attribute__((weak)) _machine_restart(void)
+{
+ fprintf(stderr, "*** reset failed ***\n");
+
+ while (1)
+ /* NOP */;
+}
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ _machine_restart();
+
+ return 0;
+}
+
+void flush_cache(ulong start_addr, ulong size)
+{
+ unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
+ unsigned long addr = start_addr & ~(lsize - 1);
+ unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
+
+ /* aend will be miscalculated when size is zero, so we return here */
+ if (size == 0)
+ return;
+
+ while (1) {
+ cache_op(HIT_WRITEBACK_INV_D, addr);
+ cache_op(HIT_INVALIDATE_I, addr);
+ if (addr == aend)
+ break;
+ addr += lsize;
+ }
+}
+
+void flush_dcache_range(ulong start_addr, ulong stop)
+{
+ unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
+ unsigned long addr = start_addr & ~(lsize - 1);
+ unsigned long aend = (stop - 1) & ~(lsize - 1);
+
+ while (1) {
+ cache_op(HIT_WRITEBACK_INV_D, addr);
+ if (addr == aend)
+ break;
+ addr += lsize;
+ }
+}
+
+void invalidate_dcache_range(ulong start_addr, ulong stop)
+{
+ unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
+ unsigned long addr = start_addr & ~(lsize - 1);
+ unsigned long aend = (stop - 1) & ~(lsize - 1);
+
+ while (1) {
+ cache_op(HIT_INVALIDATE_D, addr);
+ if (addr == aend)
+ break;
+ addr += lsize;
+ }
+}
+
+void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
+{
+ write_c0_entrylo0(low0);
+ write_c0_pagemask(pagemask);
+ write_c0_entrylo1(low1);
+ write_c0_entryhi(hi);
+ write_c0_index(index);
+ tlb_write_indexed();
+}
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mipsregs.h>
+
+void enable_interrupts(void)
+{
+}
+
+int disable_interrupts(void)
+{
+ return 0;
+}
--- /dev/null
+/*
+ * Startup Code for MIPS64 CPU-core
+ *
+ * Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any dlater version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICUdlaR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Pdlace, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+
+#ifndef CONFIG_SYS_MIPS_CACHE_MODE
+#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
+#endif
+
+ /*
+ * For the moment disable interrupts, mark the kernel mode and
+ * set ST0_KX so that the CPU does not spit fire when using
+ * 64-bit addresses.
+ */
+ .macro setup_c0_status set clr
+ .set push
+ mfc0 t0, CP0_STATUS
+ or t0, ST0_CU0 | \set | 0x1f | \clr
+ xor t0, 0x1f | \clr
+ mtc0 t0, CP0_STATUS
+ .set noreorder
+ sll zero, 3 # ehb
+ .set pop
+ .endm
+
+ .set noreorder
+
+ .globl _start
+ .text
+_start:
+ .org 0x000
+ b reset
+ nop
+ .org 0x080
+ b romReserved
+ nop
+ .org 0x100
+ b romReserved
+ nop
+ .org 0x180
+ b romReserved
+ nop
+ .org 0x200
+ b romReserved
+ nop
+ .org 0x280
+ b romReserved
+ nop
+ .org 0x300
+ b romReserved
+ nop
+ .org 0x380
+ b romReserved
+ nop
+ .org 0x480
+ b romReserved
+ nop
+
+ /*
+ * We hope there are no more reserved vectors!
+ * 128 * 8 == 1024 == 0x400
+ * so this is address R_VEC+0x400 == 0xbfc00400
+ */
+ .org 0x500
+ .align 4
+reset:
+
+ /* Clear watch registers */
+ dmtc0 zero, CP0_WATCHLO
+ dmtc0 zero, CP0_WATCHHI
+
+ /* WP(Watch Pending), SW0/1 should be cleared */
+ mtc0 zero, CP0_CAUSE
+
+ setup_c0_status ST0_KX 0
+
+ /* Init Timer */
+ mtc0 zero, CP0_COUNT
+ mtc0 zero, CP0_COMPARE
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ /* CONFIG0 register */
+ dli t0, CONF_CM_UNCACHED
+ mtc0 t0, CP0_CONFIG
+#endif
+
+ /* Initialize $gp */
+ bal 1f
+ nop
+ .dword _gp
+1:
+ ld gp, 0(ra)
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ /* Initialize any external memory */
+ dla t9, lowlevel_init
+ jalr t9
+ nop
+
+ /* Initialize caches... */
+ dla t9, mips_cache_reset
+ jalr t9
+ nop
+
+ /* ... and enable them */
+ dli t0, CONFIG_SYS_MIPS_CACHE_MODE
+ mtc0 t0, CP0_CONFIG
+#endif
+
+ /* Set up temporary stack */
+ dli t0, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
+ dla sp, 0(t0)
+
+ dla t9, board_init_f
+ jr t9
+ nop
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * a0 = addr_sp
+ * a1 = gd
+ * a2 = destination address
+ */
+ .globl relocate_code
+ .ent relocate_code
+relocate_code:
+ move sp, a0 # set new stack pointer
+
+ dli t0, CONFIG_SYS_MONITOR_BASE
+ dla t3, in_ram
+ ld t2, -24(t3) # t2 <-- uboot_end_data
+ move t1, a2
+ move s2, a2 # s2 <-- destination address
+
+ /*
+ * Fix $gp:
+ *
+ * New $gp = (Old $gp - CONFIG_SYS_MONITOR_BASE) + Destination Address
+ */
+ move t8, gp
+ dsub gp, CONFIG_SYS_MONITOR_BASE
+ dadd gp, a2 # gp now adjusted
+ dsub s1, gp, t8 # s1 <-- relocation offset
+
+ /*
+ * t0 = source address
+ * t1 = target address
+ * t2 = source end address
+ */
+
+ /*
+ * Save destination address and size for dlater usage in flush_cache()
+ */
+ move s0, a1 # save gd in s0
+ move a0, t1 # a0 <-- destination addr
+ dsub a1, t2, t0 # a1 <-- size
+
+1:
+ lw t3, 0(t0)
+ sw t3, 0(t1)
+ daddu t0, 4
+ ble t0, t2, 1b
+ daddu t1, 4
+
+ /* If caches were enabled, we would have to flush them here. */
+
+ /* a0 & a1 are already set up for flush_cache(start, size) */
+ dla t9, flush_cache
+ jalr t9
+ nop
+
+ /* Jump to where we've relocated ourselves */
+ daddi t0, s2, in_ram - _start
+ jr t0
+ nop
+
+ .dword _gp
+ .dword _GLOBAL_OFFSET_TABLE_
+ .dword uboot_end_data
+ .dword uboot_end
+ .dword num_got_entries
+
+in_ram:
+ /*
+ * Now we want to update GOT.
+ *
+ * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
+ * generated by GNU ld. Skip these reserved entries from relocation.
+ */
+ ld t3, -8(t0) # t3 <-- num_got_entries
+ ld t8, -32(t0) # t8 <-- _GLOBAL_OFFSET_TABLE_
+ ld t9, -40(t0) # t9 <-- _gp
+ dsub t8, t9 # compute offset
+ dadd t8, t8, gp # t8 now holds relocated _G_O_T_
+ daddi t8, t8, 16 # skipping first two entries
+ dli t2, 2
+1:
+ ld t1, 0(t8)
+ beqz t1, 2f
+ dadd t1, s1
+ sd t1, 0(t8)
+2:
+ daddi t2, 1
+ blt t2, t3, 1b
+ daddi t8, 8
+
+ /* Clear BSS */
+ ld t1, -24(t0) # t1 <-- uboot_end_data
+ ld t2, -16(t0) # t2 <-- uboot_end
+ dadd t1, s1 # adjust pointers
+ dadd t2, s1
+
+ dsub t1, 8
+1:
+ daddi t1, 8
+ bltl t1, t2, 1b
+ sd zero, 0(t1)
+
+ move a0, s0 # a0 <-- gd
+ dla t9, board_init_r
+ jr t9
+ move a1, s2
+
+ .end relocate_code
+
+ /* Exception handlers */
+romReserved:
+ b romReserved
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mipsregs.h>
+
+static unsigned long timestamp;
+
+/* how many counter cycles in a jiffy */
+#define CYCLES_PER_JIFFY \
+ (CONFIG_SYS_MIPS_TIMER_FREQ + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ
+
+/*
+ * timer without interrupts
+ */
+
+int timer_init(void)
+{
+ /* Set up the timer for the first expiration. */
+ timestamp = 0;
+ write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY);
+
+ return 0;
+}
+
+ulong get_timer(ulong base)
+{
+ unsigned int count;
+ unsigned int expirelo = read_c0_compare();
+
+ /* Check to see if we have missed any timestamps. */
+ count = read_c0_count();
+ while ((count - expirelo) < 0x7fffffff) {
+ expirelo += CYCLES_PER_JIFFY;
+ timestamp++;
+ }
+ write_c0_compare(expirelo);
+
+ return timestamp - base;
+}
+
+void __udelay(unsigned long usec)
+{
+ unsigned int tmo;
+
+ tmo = read_c0_count() + (usec * (CONFIG_SYS_MIPS_TIMER_FREQ / 1000000));
+ while ((tmo - read_c0_count()) < 0x7fffffff)
+ /*NOP*/;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On MIPS it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On MIPS it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ return CONFIG_SYS_HZ;
+}
unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
for (; addr <= aend; addr += lsize) {
- cache_op(Hit_Writeback_Inv_D, addr);
- cache_op(Hit_Invalidate_I, addr);
+ cache_op(HIT_WRITEBACK_INV_D, addr);
+ cache_op(HIT_INVALIDATE_I, addr);
}
}
unsigned long aend = (stop - 1) & ~(lsize - 1);
for (; addr <= aend; addr += lsize)
- cache_op(Hit_Writeback_Inv_D, addr);
+ cache_op(HIT_WRITEBACK_INV_D, addr);
}
void invalidate_dcache_range(ulong start_addr, ulong stop)
unsigned long aend = (stop - 1) & ~(lsize - 1);
for (; addr <= aend; addr += lsize)
- cache_op(Hit_Invalidate_D, addr);
+ cache_op(HIT_INVALIDATE_D, addr);
}
void flush_icache_all(void)
for (addr = CKSEG0; addr < CKSEG0 + CONFIG_SYS_ICACHE_SIZE;
addr += CONFIG_SYS_CACHELINE_SIZE) {
- cache_op(Index_Store_Tag_I, addr);
+ cache_op(INDEX_STORE_TAG_I, addr);
}
/* invalidate btb */
for (addr = CKSEG0; addr < CKSEG0 + CONFIG_SYS_DCACHE_SIZE;
addr += CONFIG_SYS_CACHELINE_SIZE) {
- cache_op(Index_Writeback_Inv_D, addr);
+ cache_op(INDEX_WRITEBACK_INV_D, addr);
}
__asm__ __volatile__("sync");
return readb(&uart->rbr_thr_dllr);
}
-static void jz_serial_puts(const char *s)
-{
- while (*s)
- serial_putc(*s++);
-}
-
static struct serial_device jz_serial_drv = {
.name = "jz_serial",
.start = jz_serial_init,
.stop = NULL,
.setbrg = jz_serial_setbrg,
.putc = jz_serial_putc,
- .puts = jz_serial_puts,
+ .puts = default_serial_puts,
.getc = jz_serial_getc,
.tstc = jz_serial_tstc,
};
li t0, KSEG0
addi t1, t0, CONFIG_SYS_DCACHE_SIZE
2:
- cache Index_Writeback_Inv_D, 0(t0)
+ cache INDEX_WRITEBACK_INV_D, 0(t0)
bne t0, t1, 2b
addi t0, CONFIG_SYS_CACHELINE_SIZE
li t0, KSEG0
addi t1, t0, CONFIG_SYS_ICACHE_SIZE
3:
- cache Index_Invalidate_I, 0(t0)
+ cache INDEX_INVALIDATE_I, 0(t0)
bne t0, t1, 3b
addi t0, CONFIG_SYS_CACHELINE_SIZE
cannot access physical memory directly from core */
#define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000)
#else /* !CONFIG_SOC_AU1X00 */
-#define UNCACHED_SDRAM(a) KSEG1ADDR(a)
+#define UNCACHED_SDRAM(a) CKSEG1ADDR(a)
#endif /* CONFIG_SOC_AU1X00 */
#endif /* __ASSEMBLY__ */
#ifdef CONFIG_SGI_IP28
/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */
#include <asm/cacheops.h>
-#define R10KCBARRIER(addr) cache Cache_Barrier, addr;
+#define R10KCBARRIER(addr) cache CACHE_BARRIER, addr;
#else
#define R10KCBARRIER(addr)
#endif
/*
* Cache Operations available on all MIPS processors with R4000-style caches
*/
-#define Index_Invalidate_I 0x00
-#define Index_Writeback_Inv_D 0x01
-#define Index_Load_Tag_I 0x04
-#define Index_Load_Tag_D 0x05
-#define Index_Store_Tag_I 0x08
-#define Index_Store_Tag_D 0x09
+#define INDEX_INVALIDATE_I 0x00
+#define INDEX_WRITEBACK_INV_D 0x01
+#define INDEX_LOAD_TAG_I 0x04
+#define INDEX_LOAD_TAG_D 0x05
+#define INDEX_STORE_TAG_I 0x08
+#define INDEX_STORE_TAG_D 0x09
#if defined(CONFIG_CPU_LOONGSON2)
-#define Hit_Invalidate_I 0x00
+#define HIT_INVALIDATE_I 0x00
#else
-#define Hit_Invalidate_I 0x10
+#define HIT_INVALIDATE_I 0x10
#endif
-#define Hit_Invalidate_D 0x11
-#define Hit_Writeback_Inv_D 0x15
+#define HIT_INVALIDATE_D 0x11
+#define HIT_WRITEBACK_INV_D 0x15
/*
* R4000-specific cacheops
*/
-#define Create_Dirty_Excl_D 0x0d
-#define Fill 0x14
-#define Hit_Writeback_I 0x18
-#define Hit_Writeback_D 0x19
+#define CREATE_DIRTY_EXCL_D 0x0d
+#define FILL 0x14
+#define HIT_WRITEBACK_I 0x18
+#define HIT_WRITEBACK_D 0x19
/*
* R4000SC and R4400SC-specific cacheops
*/
-#define Index_Invalidate_SI 0x02
-#define Index_Writeback_Inv_SD 0x03
-#define Index_Load_Tag_SI 0x06
-#define Index_Load_Tag_SD 0x07
-#define Index_Store_Tag_SI 0x0A
-#define Index_Store_Tag_SD 0x0B
-#define Create_Dirty_Excl_SD 0x0f
-#define Hit_Invalidate_SI 0x12
-#define Hit_Invalidate_SD 0x13
-#define Hit_Writeback_Inv_SD 0x17
-#define Hit_Writeback_SD 0x1b
-#define Hit_Set_Virtual_SI 0x1e
-#define Hit_Set_Virtual_SD 0x1f
+#define INDEX_INVALIDATE_SI 0x02
+#define INDEX_WRITEBACK_INV_SD 0x03
+#define INDEX_LOAD_TAG_SI 0x06
+#define INDEX_LOAD_TAG_SD 0x07
+#define INDEX_STORE_TAG_SI 0x0A
+#define INDEX_STORE_TAG_SD 0x0B
+#define CREATE_DIRTY_EXCL_SD 0x0f
+#define HIT_INVALIDATE_SI 0x12
+#define HIT_INVALIDATE_SD 0x13
+#define HIT_WRITEBACK_INV_SD 0x17
+#define HIT_WRITEBACK_SD 0x1b
+#define HIT_SET_VIRTUAL_SI 0x1e
+#define HIT_SET_VIRTUAL_SD 0x1f
/*
* R5000-specific cacheops
*/
-#define R5K_Page_Invalidate_S 0x17
+#define R5K_PAGE_INVALIDATE_S 0x17
/*
* RM7000-specific cacheops
*/
-#define Page_Invalidate_T 0x16
+#define PAGE_INVALIDATE_T 0x16
/*
* R10000-specific cacheops
* Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
* Most of the _S cacheops are identical to the R4000SC _SD cacheops.
*/
-#define Index_Writeback_Inv_S 0x03
-#define Index_Load_Tag_S 0x07
-#define Index_Store_Tag_S 0x0B
-#define Hit_Invalidate_S 0x13
-#define Cache_Barrier 0x14
-#define Hit_Writeback_Inv_S 0x17
-#define Index_Load_Data_I 0x18
-#define Index_Load_Data_D 0x19
-#define Index_Load_Data_S 0x1b
-#define Index_Store_Data_I 0x1c
-#define Index_Store_Data_D 0x1d
-#define Index_Store_Data_S 0x1f
+#define INDEX_WRITEBACK_INV_S 0x03
+#define INDEX_LOAD_TAG_S 0x07
+#define INDEX_STORE_TAG_S 0x0B
+#define HIT_INVALIDATE_S 0x13
+#define CACHE_BARRIER 0x14
+#define HIT_WRITEBACK_INV_S 0x17
+#define INDEX_LOAD_DATA_I 0x18
+#define INDEX_LOAD_DATA_D 0x19
+#define INDEX_LOAD_DATA_S 0x1b
+#define INDEX_STORE_DATA_I 0x1c
+#define INDEX_STORE_DATA_D 0x1d
+#define INDEX_STORE_DATA_S 0x1f
#endif /* __ASM_CACHEOPS_H */
unsigned long tbl;
unsigned long lastinc;
#endif
- unsigned long baudrate;
+ unsigned int baudrate;
unsigned long have_console; /* serial_init() was called */
#ifdef CONFIG_PRE_CONSOLE_BUFFER
unsigned long precon_buf_idx; /* Pre-Console buffer index */
*/
extern inline phys_addr_t virt_to_phys(volatile void * address)
{
+#ifndef CONFIG_64BIT
return CPHYSADDR(address);
+#else
+ return XPHYSADDR(address);
+#endif
}
extern inline void * phys_to_virt(unsigned long address)
{
+#ifndef CONFIG_64BIT
return (void *)KSEG0ADDR(address);
+#else
+ return (void *)CKSEG0ADDR(address);
+#endif
}
/*
*/
extern inline unsigned long virt_to_bus(volatile void * address)
{
+#ifndef CONFIG_64BIT
return CPHYSADDR(address);
+#else
+ return XPHYSADDR(address);
+#endif
}
extern inline void * bus_to_virt(unsigned long address)
{
+#ifndef CONFIG_64BIT
return (void *)KSEG0ADDR(address);
+#else
+ return (void *)CKSEG0ADDR(address);
+#endif
}
/*
typedef int __kernel_ipc_pid_t;
typedef int __kernel_uid_t;
typedef int __kernel_gid_t;
+#if _MIPS_SZLONG != 64
typedef unsigned int __kernel_size_t;
typedef int __kernel_ssize_t;
typedef int __kernel_ptrdiff_t;
+#else
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+#endif
typedef long __kernel_time_t;
typedef long __kernel_suseconds_t;
typedef long __kernel_clock_t;
#define _U_BOOT_H_ 1
typedef struct bd_info {
- int bi_baudrate; /* serial console baudrate */
+ unsigned int bi_baudrate; /* serial console baudrate */
unsigned long bi_arch_number; /* unique id for this board */
unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_memstart; /* start of DRAM memory */
/*
* We have to relocate the command table manually
*/
- fixup_cmdtable(&__u_boot_cmd_start,
- (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
+ fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+ ll_entry_count(cmd_tbl_t, cmd));
#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
/* there are some other pointer constants we must deal with */
}
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = ALIGN(4);
typedef struct global_data {
bd_t *bd;
unsigned long flags;
- unsigned long baudrate;
+ unsigned int baudrate;
unsigned long have_console; /* serial_init() was called */
unsigned long reloc_off; /* Relocation Offset */
#include <environment.h>
typedef struct bd_info {
- int bi_baudrate; /* serial console baudrate */
+ unsigned int bi_baudrate; /* serial console baudrate */
unsigned long bi_arch_number; /* unique id for this board */
unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_memstart; /* start of DRAM memory */
/*
* We have to relocate the command table manually
*/
- fixup_cmdtable(&__u_boot_cmd_start,
- (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
+ fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+ ll_entry_count(cmd_tbl_t, cmd));
#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
serial_initialize();
/* Initialize from environment */
load_addr = getenv_ulong("loadaddr", 16, load_addr);
-#ifdef BOARD_LATE_INIT
+#ifdef CONFIG_BOARD_LATE_INIT
board_late_init();
#endif
* the initialization code relocates the command table as
* well -- admittedly, this is just pure laziness ;-)
*/
- __u_boot_cmd_start = .;
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- }
+
. = ALIGN(4);
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
/* INIT DATA sections - "Small" data (see the gcc -G option)
* is always gp-relative. Here we make all init data sections
typedef struct global_data {
bd_t *bd;
unsigned long flags;
- unsigned long baudrate;
+ unsigned int baudrate;
unsigned long cpu_clk; /* CPU clock in Hz! */
unsigned long have_console; /* serial_init() was called */
#ifdef CONFIG_PRE_CONSOLE_BUFFER
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
- unsigned long bi_baudrate; /* Console Baudrate */
+ unsigned int bi_baudrate; /* Console Baudrate */
} bd_t;
/* For image.h:image_check_target_arch() */
typedef struct global_data {
bd_t *bd;
unsigned long flags;
- unsigned long baudrate;
+ unsigned int baudrate;
unsigned long cpu_clk; /* CPU clock in Hz! */
unsigned long have_console; /* serial_init() was called */
phys_size_t ram_size; /* RAM size */
#define _U_BOOT_H_
typedef struct bd_info {
- unsigned long bi_baudrate; /* serial console baudrate */
+ unsigned int bi_baudrate; /* serial console baudrate */
unsigned long bi_arch_number; /* unique id for this board */
unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_memstart; /* start of DRAM memory */
* Trap & Exception support
*/
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
{
int cnt = 0;
unsigned long i;
printf("\n");
}
-void
-show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
{
int i;
}
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
}
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
{
unsigned long fixup;
panic("machine check");
}
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
panic("Alignment Exception");
}
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
{
unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL;
int i, j;
panic("Program Check Exception");
}
-void
-SoftEmuException(struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
panic("Software Emulation Exception");
}
-
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
/* Probe an address by reading. If not present, return -1, otherwise
* return 0.
*/
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
{
#if 0
int retval;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
* Trap & Exception support
*/
-void
-print_backtrace (unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
{
int cnt = 0;
unsigned long i;
- puts ("Call backtrace: ");
+ puts("Call backtrace: ");
while (sp) {
if ((uint)sp > END_OF_MEM)
break;
i = sp[1];
if (cnt++ % 7 == 0)
- putc ('\n');
- printf ("%08lX ", i);
+ putc('\n');
+ printf("%08lX ", i);
if (cnt > 32) break;
sp = (unsigned long *) *sp;
}
- putc ('\n');
+ putc('\n');
}
-void show_regs (struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
{
int i;
- printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
regs->msr, regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0,
regs->msr & MSR_FP ? 1 : 0,regs->msr & MSR_ME ? 1 : 0,
regs->msr & MSR_IR ? 1 : 0,
regs->msr & MSR_DR ? 1 : 0);
- putc ('\n');
+ putc('\n');
for (i = 0; i < 32; i++) {
if ((i % 8) == 0) {
- printf ("GPR%02d: ", i);
+ printf("GPR%02d: ", i);
}
- printf ("%08lX ", regs->gpr[i]);
+ printf("%08lX ", regs->gpr[i]);
if ((i % 8) == 7) {
- putc ('\n');
+ putc('\n');
}
}
}
-void
-_exception (int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
{
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
- panic ("Exception at pc %lx signal %d", regs->nip,signr);
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Exception at pc %lx signal %d", regs->nip, signr);
}
-void
-MachineCheckException (struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
{
- unsigned long fixup;
+ unsigned long fixup = search_exception_table(regs->nip);
- if ((fixup = search_exception_table (regs->nip)) != 0) {
+ if (fixup) {
regs->nip = fixup;
return;
}
return;
#endif
- puts ("Machine check.\nCaused by (from msr): ");
- printf ("regs %p ",regs);
+ puts("Machine check.\nCaused by (from msr): ");
+ printf("regs %p ", regs);
switch (regs->msr & 0x00FF0000) {
case (0x80000000 >> 10):
- puts ("Instruction cache parity signal\n");
+ puts("Instruction cache parity signal\n");
break;
case (0x80000000 >> 11):
- puts ("Data cache parity signal\n");
+ puts("Data cache parity signal\n");
break;
case (0x80000000 >> 12):
- puts ("Machine check signal\n");
+ puts("Machine check signal\n");
break;
case (0x80000000 >> 13):
- puts ("Transfer error ack signal\n");
+ puts("Transfer error ack signal\n");
break;
case (0x80000000 >> 14):
- puts ("Data parity signal\n");
+ puts("Data parity signal\n");
break;
case (0x80000000 >> 15):
- puts ("Address parity signal\n");
+ puts("Address parity signal\n");
break;
default:
- puts ("Unknown values in msr\n");
+ puts("Unknown values in msr\n");
}
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
- panic ("machine check");
+ panic("machine check");
}
-void
-AlignmentException (struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
{
#ifdef CONFIG_CMD_KGDB
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
- panic ("Alignment Exception");
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Alignment Exception");
}
-void
-ProgramCheckException (struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
{
#ifdef CONFIG_CMD_KGDB
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
- panic ("Program Check Exception");
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Program Check Exception");
}
-void
-SoftEmuException (struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
{
#ifdef CONFIG_CMD_KGDB
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
- panic ("Software Emulation Exception");
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Software Emulation Exception");
}
-void
-UnknownException (struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
{
#ifdef CONFIG_CMD_KGDB
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
- printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
regs->nip, regs->msr, regs->trap);
- _exception (0, regs);
+ _exception(0, regs);
}
#ifdef CONFIG_CMD_BEDBUG
-extern void do_bedbug_breakpoint (struct pt_regs *);
+extern void do_bedbug_breakpoint(struct pt_regs *);
#endif
-void
-DebugException (struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
{
- printf ("Debugger trap at @ %lx\n", regs->nip );
- show_regs (regs);
+ printf("Debugger trap at @ %lx\n", regs->nip);
+ show_regs(regs);
#ifdef CONFIG_CMD_BEDBUG
- do_bedbug_breakpoint (regs);
+ do_bedbug_breakpoint(regs);
#endif
}
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
#endif
}
-static void mpc5xx_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc(*s);
- ++s;
- }
-}
-
static struct serial_device mpc5xx_serial_drv = {
.name = "mpc5xx_serial",
.start = mpc5xx_serial_init,
.stop = NULL,
.setbrg = mpc5xx_serial_setbrg,
.putc = mpc5xx_serial_putc,
- .puts = mpc5xx_serial_puts,
+ .puts = default_serial_puts,
.getc = mpc5xx_serial_getc,
.tstc = mpc5xx_serial_tstc,
};
/*
* Print stack backtrace
*/
-void print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
{
int cnt = 0;
unsigned long i;
/*
* Print current registers
*/
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
{
int i;
printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
/*
* General exception handler routine
*/
-void _exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
* Trap & Exception support
*/
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
{
int cnt = 0;
unsigned long i;
printf("\n");
}
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
{
int i;
}
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
}
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
{
unsigned long fixup;
panic("machine check");
}
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
panic("Alignment Exception");
}
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
panic("Program Check Exception");
}
-void
-SoftEmuException(struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
}
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
extern void do_bedbug_breakpoint(struct pt_regs *);
#endif
-void
-DebugException(struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
{
printf("Debugger trap at @ %lx\n", regs->nip );
/* Probe an address by reading. If not present, return -1, otherwise
* return 0.
*/
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
{
#if 0
int retval;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
#include <asm/processor.h>
/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table (unsigned long);
+extern unsigned long search_exception_table(unsigned long);
/* THIS NEEDS CHANGING to use the board info structure.
*/
* Trap & Exception support
*/
-void print_backtrace (unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
{
int cnt = 0;
unsigned long i;
- printf ("Call backtrace: ");
+ printf("Call backtrace: ");
while (sp) {
if ((uint) sp > END_OF_MEM)
break;
i = sp[1];
if (cnt++ % 7 == 0)
- printf ("\n");
- printf ("%08lX ", i);
+ printf("\n");
+ printf("%08lX ", i);
if (cnt > 32)
break;
sp = (unsigned long *) *sp;
}
- printf ("\n");
+ printf("\n");
}
-void show_regs (struct pt_regs *regs)
+void show_regs(struct pt_regs *regs)
{
int i;
- printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
regs->msr,
regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0,
regs->msr & MSR_FP ? 1 : 0, regs->msr & MSR_ME ? 1 : 0,
regs->msr & MSR_IR ? 1 : 0, regs->msr & MSR_DR ? 1 : 0);
- printf ("\n");
+ printf("\n");
for (i = 0; i < 32; i++) {
if ((i % 8) == 0) {
- printf ("GPR%02d: ", i);
+ printf("GPR%02d: ", i);
}
- printf ("%08lX ", regs->gpr[i]);
+ printf("%08lX ", regs->gpr[i]);
if ((i % 8) == 7) {
- printf ("\n");
+ printf("\n");
}
}
}
-void _exception (int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
{
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("Exception in kernel pc %lx signal %d", regs->nip, signr);
+ show_regs(regs);
+ print_backtrace((unsigned long *) regs->gpr[1]);
+ panic("Exception in kernel pc %lx signal %d", regs->nip, signr);
}
-void MachineCheckException (struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
{
- unsigned long fixup;
+ unsigned long fixup = search_exception_table(regs->nip);
/* Probing PCI using config cycles cause this exception
* when a device is not present. Catch it and return to
* the PCI exception handler.
*/
- if ((fixup = search_exception_table (regs->nip)) != 0) {
+ if (fixup) {
regs->nip = fixup;
return;
}
#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
- printf ("Machine check in kernel mode.\n");
- printf ("Caused by (from msr): ");
- printf ("regs %p ", regs);
+ printf("Machine check in kernel mode.\n");
+ printf("Caused by (from msr): ");
+ printf("regs %p ", regs);
/* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */
switch (regs->msr & 0x000F0000) {
case (0x80000000 >> 12):
- printf ("Machine check signal - probably due to mm fault\n"
+ printf("Machine check signal - probably due to mm fault\n"
"with mmu off\n");
break;
case (0x80000000 >> 13):
- printf ("Transfer error ack signal\n");
+ printf("Transfer error ack signal\n");
break;
case (0x80000000 >> 14):
- printf ("Data parity signal\n");
+ printf("Data parity signal\n");
break;
case (0x80000000 >> 15):
- printf ("Address parity signal\n");
+ printf("Address parity signal\n");
break;
default:
- printf ("Unknown values in msr\n");
+ printf("Unknown values in msr\n");
}
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("machine check");
+ show_regs(regs);
+ print_backtrace((unsigned long *) regs->gpr[1]);
+ panic("machine check");
}
-void AlignmentException (struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("Alignment Exception");
+ show_regs(regs);
+ print_backtrace((unsigned long *) regs->gpr[1]);
+ panic("Alignment Exception");
}
-void ProgramCheckException (struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("Program Check Exception");
+ show_regs(regs);
+ print_backtrace((unsigned long *) regs->gpr[1]);
+ panic("Program Check Exception");
}
-void SoftEmuException (struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("Software Emulation Exception");
+ show_regs(regs);
+ print_backtrace((unsigned long *) regs->gpr[1]);
+ panic("Software Emulation Exception");
}
-void UnknownException (struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
- printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
regs->nip, regs->msr, regs->trap);
- _exception (0, regs);
+ _exception(0, regs);
}
#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint (struct pt_regs *);
+extern void do_bedbug_breakpoint(struct pt_regs *);
#endif
-void DebugException (struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
{
- printf ("Debugger trap at @ %lx\n", regs->nip);
- show_regs (regs);
+ printf("Debugger trap at @ %lx\n", regs->nip);
+ show_regs(regs);
#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint (regs);
+ do_bedbug_breakpoint(regs);
#endif
}
/* Probe an address by reading. If not present, return -1, otherwise
* return 0.
*/
-int addr_probe (uint * addr)
+int addr_probe(uint *addr)
{
#if 0
int retval;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
psc->xmitbuf[0] = c;
}
-static void mpc8220_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
static int mpc8220_serial_getc(void)
{
volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
.stop = NULL,
.setbrg = mpc8220_serial_setbrg,
.putc = mpc8220_serial_putc,
- .puts = mpc8220_serial_puts,
+ .puts = default_serial_puts,
.getc = mpc8220_serial_getc,
.tstc = mpc8220_serial_tstc,
};
cpu_init_f (void)
{
/* MOUSSE board is initialized in asm */
-#if !defined(CONFIG_MOUSSE) && !defined(CONFIG_BMW)
+#if !defined(CONFIG_MOUSSE)
register unsigned long val;
CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/
/* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/
CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */
__asm__ __volatile__("eieio");
-#endif /* !CONFIG_MOUSSE && !CONFIG_BMW */
+#endif /* !CONFIG_MOUSSE */
}
in_flash:
-#if defined(CONFIG_BMW)
- bl early_init_f /* Must be ASM: no stack yet! */
-#endif
/*
* Setup BATs - cannot be done in C since we don't have a stack yet
*/
mfmsr r3
ori r3, r3, (MSR_IR | MSR_DR)
mtmsr r3
-#if !defined(CONFIG_BMW)
+
/* Enable and invalidate data cache.
*/
mfspr r3, HID0
ori r3, r3, 0x0080
sync
mtspr 1011, r3
-#endif /* !CONFIG_BMW */
+
/*
* Thisk the stack pointer *somewhere* sensible. Doesnt
* matter much where as we'll move it when we relocate
bdnz 3b
4:
-#if !defined(CONFIG_BMW)
/* Unlock the data cache and invalidate locked area */
xor r0, r0, r0
mtspr 1011, r0
dcbi r0, r4
addi r4, r4, 32
bdnz 41b
-#endif
/*
* Now flush the cache: note that we must start from a cache aligned
* Trap & Exception support
*/
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
{
int cnt = 0;
unsigned long i;
printf("\n");
}
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
{
int i;
}
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
}
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
{
unsigned long fixup;
panic("machine check");
}
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("Alignment Exception");
}
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("Program Check Exception");
}
-void
-SoftEmuException(struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
}
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
{
printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
regs->nip, regs->msr, regs->trap);
extern void do_bedbug_breakpoint(struct pt_regs *);
#endif
-void
-DebugException(struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
{
printf("Debugger trap at @ %lx\n", regs->nip );
/* Probe an address by reading. If not present, return -1, otherwise
* return 0.
*/
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
{
#if 0
int retval;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
tbdf->cbd_sc |= BD_SC_READY;
}
-static void mpc8260_scc_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
static int mpc8260_scc_serial_getc(void)
{
volatile cbd_t *rbdf;
.stop = NULL,
.setbrg = mpc8260_scc_serial_setbrg,
.putc = mpc8260_scc_serial_putc,
- .puts = mpc8260_scc_serial_puts,
+ .puts = default_serial_puts,
.getc = mpc8260_scc_serial_getc,
.tstc = mpc8260_scc_serial_tstc,
};
rtx->txbd.cbd_sc |= BD_SC_READY;
}
-static void mpc8260_smc_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
static int mpc8260_smc_serial_getc(void)
{
volatile smc_uart_t *up;
.stop = NULL,
.setbrg = mpc8260_smc_serial_setbrg,
.putc = mpc8260_smc_serial_putc,
- .puts = mpc8260_smc_serial_puts,
+ .puts = default_serial_puts,
.getc = mpc8260_smc_serial_getc,
.tstc = mpc8260_smc_serial_tstc,
};
* Trap & Exception support
*/
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
{
int cnt = 0;
unsigned long i;
putc ('\n');
}
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
{
int i;
}
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
}
#endif
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
{
unsigned long fixup;
panic("machine check");
}
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
panic("Alignment Exception");
}
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
panic("Program Check Exception");
}
-void
-SoftEmuException(struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
}
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
extern void do_bedbug_breakpoint(struct pt_regs *);
#endif
-void
-DebugException(struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
{
printf("Debugger trap at @ %lx\n", regs->nip );
/* Probe an address by reading. If not present, return -1, otherwise
* return 0.
*/
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
{
#if 0
int retval;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
u32 partid;
} cpu_type_list [] = {
CPU_TYPE_ENTRY(8308),
+ CPU_TYPE_ENTRY(8309),
CPU_TYPE_ENTRY(8311),
CPU_TYPE_ENTRY(8313),
CPU_TYPE_ENTRY(8314),
#ifdef CONFIG_SYS_SICRL
__raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl);
#endif
+#ifdef CONFIG_SYS_GPR1
+ __raw_writel(CONFIG_SYS_GPR1, &im->sysconf.gpr1);
+#endif
#ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */
__raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr);
#endif
u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 };
path = fdt_path_offset(blob, prop);
- prop = fdt_getprop(blob, path, "interrupts", 0);
+ prop = fdt_getprop(blob, path, "interrupts",
+ NULL);
if (prop)
fdt_setprop(blob, path, "interrupts",
&tmp, sizeof(tmp));
u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 };
path = fdt_path_offset(blob, prop);
- prop = fdt_getprop(blob, path, "interrupts", 0);
+ prop = fdt_getprop(blob, path, "interrupts",
+ NULL);
if (prop)
fdt_setprop(blob, path, "interrupts",
&tmp, sizeof(tmp));
mult_t vco_divider;
} corecnf_t;
-corecnf_t corecnf_tab[] = {
+static corecnf_t corecnf_tab[] = {
{_byp, _byp}, /* 0x00 */
{_byp, _byp}, /* 0x01 */
{_byp, _byp}, /* 0x02 */
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
+#elif defined(CONFIG_MPC8309)
+ u32 usbdr_clk;
#endif
#ifdef CONFIG_MPC834x
u32 usbmph_clk;
#if defined(CONFIG_FSL_ESDHC)
u32 sdhc_clk;
#endif
+#if !defined(CONFIG_MPC8309)
u32 enc_clk;
+#endif
u32 lbiu_clk;
u32 lclk_clk;
u32 mem_clk;
#if defined(CONFIG_MPC8360)
u32 mem_sec_clk;
#endif
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+#if defined(CONFIG_QE)
u32 qepmf;
u32 qepdf;
u32 qe_clk;
/* unkown SCCR_TSEC1CM value */
return -2;
}
+#endif
+#if defined(CONFIG_MPC830x) || defined(CONFIG_MPC831x) || \
+ defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
case 0:
usbdr_clk = 0;
return -6;
}
#endif
+#if !defined(CONFIG_MPC8309)
switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
case 0:
enc_clk = 0;
/* unkown SCCR_ENCCM value */
return -7;
}
+#endif
#if defined(CONFIG_FSL_ESDHC)
switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
i2c1_clk = sdhc_clk;
#elif defined(CONFIG_MPC837x)
i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC8309)
+ i2c1_clk = csb_clk;
#endif
#if !defined(CONFIG_MPC832x)
i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
return -13;
}
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+#if defined(CONFIG_QE)
qepmf = (im->clk.spmr & SPMR_CEPMF) >> SPMR_CEPMF_SHIFT;
qepdf = (im->clk.spmr & SPMR_CEPDF) >> SPMR_CEPDF_SHIFT;
qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
gd->tsec1_clk = tsec1_clk;
gd->tsec2_clk = tsec2_clk;
gd->usbdr_clk = usbdr_clk;
+#elif defined(CONFIG_MPC8309)
+ gd->usbdr_clk = usbdr_clk;
#endif
#if defined(CONFIG_MPC834x)
gd->usbmph_clk = usbmph_clk;
#if !defined(CONFIG_MPC832x)
gd->i2c2_clk = i2c2_clk;
#endif
+#if !defined(CONFIG_MPC8309)
gd->enc_clk = enc_clk;
+#endif
gd->lbiu_clk = lbiu_clk;
gd->lclk_clk = lclk_clk;
gd->mem_clk = mem_clk;
#if defined(CONFIG_MPC8360)
gd->mem_sec_clk = mem_sec_clk;
#endif
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+#if defined(CONFIG_QE)
gd->qe_clk = qe_clk;
gd->brg_clk = brg_clk;
#endif
return gd->mem_clk;
}
-int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char buf[32];
printf("Clock configuration:\n");
printf(" Core: %-4s MHz\n", strmhz(buf, gd->core_clk));
printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+#if defined(CONFIG_QE)
printf(" QE: %-4s MHz\n", strmhz(buf, gd->qe_clk));
printf(" BRG: %-4s MHz\n", strmhz(buf, gd->brg_clk));
#endif
#if defined(CONFIG_MPC8360)
printf(" DDR Secondary: %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
#endif
+#if !defined(CONFIG_MPC8309)
printf(" SEC: %-4s MHz\n", strmhz(buf, gd->enc_clk));
+#endif
printf(" I2C1: %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
#if !defined(CONFIG_MPC832x)
printf(" I2C2: %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
printf(" TSEC1: %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
printf(" TSEC2: %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
+#elif defined(CONFIG_MPC8309)
+ printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
#endif
#if defined(CONFIG_MPC834x)
printf(" USB MPH: %-4s MHz\n", strmhz(buf, gd->usbmph_clk));
* Trap & Exception support
*/
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
{
int cnt = 0;
unsigned long i;
putc ('\n');
}
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
{
int i;
}
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
}
#endif
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
{
unsigned long fixup;
panic("machine check");
}
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
panic("Alignment Exception");
}
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
panic("Program Check Exception");
}
-void
-SoftEmuException(struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
}
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
extern void do_bedbug_breakpoint(struct pt_regs *);
#endif
-void
-DebugException(struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
{
printf("Debugger trap at @ %lx\n", regs->nip );
show_regs(regs);
/* Probe an address by reading. If not present, return -1, otherwise
* return 0.
*/
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
{
#if 0
int retval;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_P5040) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o
COBJS-$(CONFIG_BSC9131) += ddr-gen3.o
COBJS-$(CONFIG_CPM2) += ether_fcc.o
COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o
COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o
COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
+COBJS-$(CONFIG_PPC_P5040) += p5040_ids.o
+COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o
+COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o
COBJS-$(CONFIG_QE) += qe_io.o
COBJS-$(CONFIG_CPM2) += serial_scc.o
-COBJS-$(CONFIG_FSL_CORENET) += fsl_corenet_serdes.o
+COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o
+COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o
# SoC specific SERDES support
COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o
COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o
COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o
+COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o
+COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o
+COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o
COBJS = $(COBJS-y)
COBJS += cpu.o
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 27, 1, 0),
+ SET_QP_INFO(2, 28, 1, 0),
+ SET_QP_INFO(3, 29, 1, 1),
+ SET_QP_INFO(4, 30, 1, 1),
+ SET_QP_INFO(5, 31, 1, 2),
+ SET_QP_INFO(6, 32, 1, 2),
+ SET_QP_INFO(7, 33, 1, 3),
+ SET_QP_INFO(8, 34, 1, 3),
+ SET_QP_INFO(9, 35, 1, 0),
+ SET_QP_INFO(10, 36, 1, 0),
+ SET_QP_INFO(11, 37, 1, 1),
+ SET_QP_INFO(12, 38, 1, 1),
+ SET_QP_INFO(13, 39, 1, 2),
+ SET_QP_INFO(14, 40, 1, 2),
+ SET_QP_INFO(15, 41, 1, 3),
+ SET_QP_INFO(16, 42, 1, 3),
+ SET_QP_INFO(17, 43, 1, 0),
+ SET_QP_INFO(18, 44, 1, 0),
+ SET_QP_INFO(19, 45, 1, 1),
+ SET_QP_INFO(20, 46, 1, 1),
+ SET_QP_INFO(21, 47, 1, 2),
+ SET_QP_INFO(22, 48, 1, 2),
+ SET_QP_INFO(23, 49, 1, 3),
+ SET_QP_INFO(24, 50, 1, 3),
+ SET_QP_INFO(25, 51, 1, 0),
+};
+#endif
+
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+ SET_SRIO_LIODN_1(1, 307),
+ SET_SRIO_LIODN_1(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(62),
+ SET_BMAN_LIODN(63),
+#endif
+
+ SET_SDHC_LIODN(1, 552),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+
+ SET_DMA_LIODN(1, 147),
+ SET_DMA_LIODN(2, 227),
+
+ SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+ SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+ SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+ SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+ /* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 88),
+ SET_FMAN_RX_1G_LIODN(1, 1, 89),
+ SET_FMAN_RX_1G_LIODN(1, 2, 90),
+ SET_FMAN_RX_1G_LIODN(1, 3, 91),
+ SET_FMAN_RX_1G_LIODN(1, 4, 92),
+ SET_FMAN_RX_1G_LIODN(1, 5, 93),
+ SET_FMAN_RX_10G_LIODN(1, 0, 94),
+ SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+ SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+ SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+ SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+ SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+ SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+ SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
+ SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
+ SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
+ SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
+ SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
+ SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+ /* Set RMan block 0-3 liodn offset */
+ SET_RMAN_LIODN(0, 678),
+ SET_RMAN_LIODN(1, 679),
+ SET_RMAN_LIODN(2, 680),
+ SET_RMAN_LIODN(3, 681),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+ [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet2_serdes.h"
+
+struct serdes_config {
+ u8 protocol;
+ u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {0x0D, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x0E, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x12, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x2a, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ CPRI6, CPRI5, CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x30, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x32, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x33, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x34, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x3E, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+ /* SerDes 2 */
+ {0x18, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ AURORA, AURORA, SRIO1, SRIO1}},
+ {0x1D, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ AURORA, AURORA, SRIO1, SRIO1}},
+ {0x2B, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2,
+ AURORA, AURORA, SRIO1, SRIO1}},
+ {0x30, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2,
+ AURORA, AURORA,
+ SRIO1, SRIO1}},
+ {0x49, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x4A, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x4C, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x4E, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x84, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2, AURORA, AURORA,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0x85, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2, AURORA, AURORA,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0x87, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0x93, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {0x9E, {PCIE1, PCIE1, PCIE1, PCIE1,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {0x9A, {PCIE1, PCIE1,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {0xB2, {PCIE1, PCIE1, PCIE1, PCIE1,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0xC3, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {}
+};
+static struct serdes_config *serdes_cfg_tbl[] = {
+ serdes1_cfg_tbl,
+ serdes2_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == cfg)
+ return ptr->lanes[lane];
+ ptr++;
+ }
+
+ return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == prtcl)
+ break;
+ ptr++;
+ }
+
+ if (!ptr->protocol)
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (ptr->lanes[i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC111)
puts("Work-around for Erratum ESDHC111 enabled\n");
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+ puts("Work-around for Erratum A004468 enabled\n");
+#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135)
puts("Work-around for Erratum ESDHC135 enabled\n");
#endif
-#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC136)
- puts("Work-around for Erratum ESDHC136 enabled\n");
+#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC13)
+ if (SVR_MAJ(svr) < 3)
+ puts("Work-around for Erratum ESDHC13 enabled\n");
#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001)
puts("Work-around for Erratum ESDHC-A001 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
puts("Work-around for Erratum A004510 enabled\n");
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+ puts("Work-around for Erratum SRIO-A004034 enabled\n");
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
+ puts("Work-around for Erratum A004934 enabled\n");
#endif
return 0;
}
uint major, minor;
struct cpu_type *cpu;
char buf1[32], buf2[32];
-#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET)
+#if (defined(CONFIG_DDR_CLK_FREQ) || \
+ defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif /* CONFIG_FSL_CORENET */
-#ifdef CONFIG_DDR_CLK_FREQ
- u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
- >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-#else
+
+ /*
+ * Cornet platforms use ddr sync bit in RCW to indicate sync vs async
+ * mode. Previous platform use ddr ratio to do the same. This
+ * information is only for display here.
+ */
#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ u32 ddr_sync = 0; /* only async mode is supported */
+#else
u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
>> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+#else /* CONFIG_FSL_CORENET */
+#ifdef CONFIG_DDR_CLK_FREQ
+ u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+ >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
#else
u32 ddr_ratio = 0;
-#endif /* CONFIG_FSL_CORENET */
#endif /* CONFIG_DDR_CLK_FREQ */
+#endif /* CONFIG_FSL_CORENET */
+
unsigned int i, core, nr_cores = cpu_numcores();
u32 mask = cpu_mask();
printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
+ if (nr_cores > CONFIG_MAX_CPUS) {
+ panic("\nUnexpected number of cores: %d, max is %d\n",
+ nr_cores, CONFIG_MAX_CPUS);
+ }
+
get_sys_info(&sysinfo);
puts("Clock Configuration:");
}
#endif
+#if defined(CONFIG_FSL_IFC)
+ printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+#endif
+
#ifdef CONFIG_CPM2
printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
#endif
}
#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freqQMAN));
+#endif
+
#ifdef CONFIG_SYS_DPAA_PME
printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME));
#endif
/*
* Clear TSR(WIS) bit by writing 1
*/
- unsigned long val;
- val = mfspr(SPRN_TSR);
- val |= TSR_WIS;
- mtspr(SPRN_TSR, val);
+ mtspr(SPRN_TSR, TSR_WIS);
}
#endif /* CONFIG_WATCHDOG */
printf("Corenet Platform Cache: %d KB enabled\n", size);
}
-void invalidate_cpc(void)
+static void invalidate_cpc(void)
{
int i;
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
}
__attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+int enable_cluster_l2(void)
+{
+ int i = 0;
+ u32 cluster;
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ struct ccsr_cluster_l2 __iomem *l2cache;
+
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+ if (cluster & TP_CLUSTER_EOC)
+ return 0;
+
+ /* The first cache has already been set up, so skip it */
+ i++;
+
+ /* Look through the remaining clusters, and set up their caches */
+ do {
+ l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000);
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+
+ /* set stash ID to (cluster) * 2 + 32 + 1 */
+ clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
+
+ printf("enable l2 for cluster %d %p\n", i, l2cache);
+
+ out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
+ while ((in_be32(&l2cache->l2csr0) &
+ (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
+ ;
+ out_be32(&l2cache->l2csr0, L2CSR0_L2E);
+ i++;
+ } while (!(cluster & TP_CLUSTER_EOC));
+
+ return 0;
+}
+#endif
+
/*
* Initialize L2 as cache.
*
{
__maybe_unused u32 svr = get_svr();
#ifdef CONFIG_SYS_LBC_LCRR
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
+ fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR;
+#endif
+#ifdef CONFIG_L2_CACHE
+ ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR;
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+ struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
puts ("L2: ");
#if defined(CONFIG_L2_CACHE)
- volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
volatile uint cache_ctl;
uint ver;
u32 l2siz_field;
}
skip_l2:
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+ if (l2cache->l2csr0 & L2CSR0_L2E)
+ printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64);
+
+ enable_cluster_l2();
#else
puts("disabled\n");
#endif
#ifdef CONFIG_SYS_SRIO
srio_init();
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
char *s = getenv("bootmaster");
if (s) {
if (!strcmp(s, "SRIO1")) {
setup_mp();
#endif
-#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136
+#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13
{
- void *p;
- p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
- setbits_be32(p, 1 << (31 - 14));
+ if (SVR_MAJ(svr) < 3) {
+ void *p;
+ p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
+ setbits_be32(p, 1 << (31 - 14));
+ }
}
#endif
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num)
{
- unsigned int i;
+ unsigned int i, bus_width;
volatile ccsr_ddr_t *ddr;
u32 temp_sdram_cfg;
+ u32 total_gb_size_per_controller;
+ int timeout;
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+ int timeout_save;
volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
- u32 total_gb_size_per_controller;
unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
int csn = -1;
#endif
return;
}
- out_be32(&ddr->eor, regs->ddr_eor);
-
+ if (regs->ddr_eor)
+ out_be32(&ddr->eor, regs->ddr_eor);
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
debug("Workaround for ERRATUM_DDR111_DDR134\n");
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
+ if (regs->ddr_wrlvl_cntl_2)
+ out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
+ if (regs->ddr_wrlvl_cntl_3)
+ out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
+
out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
out_be32(&ddr->debug[i], regs->debug[i]);
}
}
+#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
+ out_be32(&ddr->debug[28], 0x00003000);
+#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
out_be32(&ddr->debug[12], 0x00000015);
out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
asm volatile("sync;isync");
+ total_gb_size_per_controller = 0;
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (!(regs->cs[i].config & 0x80000000))
+ continue;
+ total_gb_size_per_controller += 1 << (
+ ((regs->cs[i].config >> 14) & 0x3) + 2 +
+ ((regs->cs[i].config >> 8) & 0x7) + 12 +
+ ((regs->cs[i].config >> 0) & 0x7) + 8 +
+ 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
+ 26); /* minus 26 (count of 64M) */
+ }
+ if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */
+ total_gb_size_per_controller *= 3;
+ else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */
+ total_gb_size_per_controller <<= 1;
+ /*
+ * total memory / bus width = transactions needed
+ * transactions needed / data rate = seconds
+ * to add plenty of buffer, double the time
+ * For example, 2GB on 666MT/s 64-bit bus takes about 402ms
+ * Let's wait for 800ms
+ */
+ bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
+ >> SDRAM_CFG_DBW_SHIFT);
+ timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
+ (get_ddr_freq(0) >> 20)) << 1;
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+ timeout_save = timeout;
+#endif
+ total_gb_size_per_controller >>= 4; /* shift down to gb size */
+ debug("total %d GB\n", total_gb_size_per_controller);
+ debug("Need to wait up to %d * 10ms\n", timeout);
+
/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
+ while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+ (timeout >= 0)) {
udelay(10000); /* throttle polling rate */
+ timeout--;
+ }
+
+ if (timeout <= 0)
+ printf("Waiting for D_INIT timeout. Memory may not work.\n");
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
/* continue this workaround */
while (in_be32(&ddr->debug[1]) & 0x400)
udelay(10000); /* throttle polling rate */
- /* 7. Wait for 400ms/GB */
- total_gb_size_per_controller = 0;
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == csn) {
- total_gb_size_per_controller +=
- ((csn_bnds_backup & 0xFFFF) >> 6)
- - (csn_bnds_backup >> 22) + 1;
- } else {
- total_gb_size_per_controller +=
- ((regs->cs[i].bnds & 0xFFFF) >> 6)
- - (regs->cs[i].bnds >> 22) + 1;
- }
- }
- if (in_be32(&ddr->sdram_cfg) & 0x80000)
- total_gb_size_per_controller <<= 1;
- debug("Wait for %d ms\n", total_gb_size_per_controller * 400);
- udelay(total_gb_size_per_controller * 400000);
+ /* 7. Wait for state machine 2nd run, roughly 400ms/GB */
+ debug("Wait for %d * 10ms\n", timeout_save);
+ udelay(timeout_save * 10000);
/* 8. Set sdram_cfg_2[dinit] if options requires */
setbits_be32(&ddr->sdram_cfg_2,
debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
/* 9. Poll until dinit is cleared */
- while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
- udelay(10000);
+ timeout = timeout_save;
+ debug("Need to wait up to %d * 10ms\n", timeout);
+ while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+ (timeout >= 0)) {
+ udelay(10000); /* throttle polling rate */
+ timeout--;
+ }
+
+ if (timeout <= 0)
+ printf("Waiting for D_INIT timeout. Memory may not work.\n");
/* 10. Clear EEBACR[3] */
clrbits_be32(&ecm->eebacr, 10000000);
void ft_fixup_cpu(void *blob, u64 memory_limit)
{
int off;
- ulong spin_tbl_addr = get_spin_phys_addr();
- u32 bootpg = determine_mp_bootpg();
+ phys_addr_t spin_tbl_addr = get_spin_phys_addr();
+ u32 bootpg = determine_mp_bootpg(NULL);
u32 id = get_my_id();
const char *enable_method;
if ((u64)bootpg < memory_limit) {
off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
if (off < 0)
- printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
+ printf("Failed to reserve memory for bootpg: %s\n",
+ fdt_strerror(off));
+ }
+ /* Reserve spin table page */
+ if (spin_tbl_addr < memory_limit) {
+ off = fdt_add_mem_rsv(blob,
+ (spin_tbl_addr & ~0xffful), 4096);
+ if (off < 0)
+ printf("Failed to reserve memory for spin table: %s\n",
+ fdt_strerror(off));
}
}
#endif
/* we dont bother w/L3 since no platform of this type has one */
}
-#elif defined(CONFIG_BACKSIDE_L2_CACHE)
+#elif defined(CONFIG_BACKSIDE_L2_CACHE) || \
+ defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
static inline void ft_fixup_l2cache(void *blob)
{
int off, l2_off, l3_off = -1;
u32 *ph;
+#ifdef CONFIG_BACKSIDE_L2_CACHE
u32 l2cfg0 = mfspr(SPRN_L2CFG0);
+#else
+ struct ccsr_cluster_l2 *l2cache =
+ (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2);
+ u32 l2cfg0 = in_be32(&l2cache->l2cfg0);
+#endif
u32 size, line_size, num_ways, num_sets;
int has_l2 = 1;
if (has_l2) {
#ifdef CONFIG_SYS_CACHE_STASHING
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ /* Only initialize every eighth thread */
+ if (reg && !((*reg) % 8))
+#else
if (reg)
+#endif
fdt_setprop_cell(blob, l2_off, "cache-stash-id",
(*reg * 2) + 32 + 1);
#endif
#endif
#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ do_fixup_by_compat_u32(blob, "fsl,qman",
+ "clock-frequency", sysinfo.freqQMAN, 1);
+#endif
+
#ifdef CONFIG_SYS_DPAA_PME
do_fixup_by_compat_u32(blob, "fsl,pme",
"clock-frequency", sysinfo.freqPME, 1);
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/immap_85xx.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/fsl_law.h>
+#include <asm/errno.h>
+#include "fsl_corenet2_serdes.h"
+
+static u64 serdes1_prtcl_map;
+static u64 serdes2_prtcl_map;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+static u64 serdes3_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+static u64 serdes4_prtcl_map;
+#endif
+
+#ifdef DEBUG
+static const char *serdes_prtcl_str[] = {
+ [NONE] = "NA",
+ [PCIE1] = "PCIE1",
+ [PCIE2] = "PCIE2",
+ [PCIE3] = "PCIE3",
+ [PCIE4] = "PCIE4",
+ [SATA1] = "SATA1",
+ [SATA2] = "SATA2",
+ [SRIO1] = "SRIO1",
+ [SRIO2] = "SRIO2",
+ [SGMII_FM1_DTSEC1] = "SGMII_FM1_DTSEC1",
+ [SGMII_FM1_DTSEC2] = "SGMII_FM1_DTSEC2",
+ [SGMII_FM1_DTSEC3] = "SGMII_FM1_DTSEC3",
+ [SGMII_FM1_DTSEC4] = "SGMII_FM1_DTSEC4",
+ [SGMII_FM1_DTSEC5] = "SGMII_FM1_DTSEC5",
+ [SGMII_FM1_DTSEC6] = "SGMII_FM1_DTSEC6",
+ [SGMII_FM2_DTSEC1] = "SGMII_FM2_DTSEC1",
+ [SGMII_FM2_DTSEC2] = "SGMII_FM2_DTSEC2",
+ [SGMII_FM2_DTSEC3] = "SGMII_FM2_DTSEC3",
+ [SGMII_FM2_DTSEC4] = "SGMII_FM2_DTSEC4",
+ [XAUI_FM1] = "XAUI_FM1",
+ [XAUI_FM2] = "XAUI_FM2",
+ [AURORA] = "DEBUG",
+ [CPRI1] = "CPRI1",
+ [CPRI2] = "CPRI2",
+ [CPRI3] = "CPRI3",
+ [CPRI4] = "CPRI4",
+ [CPRI5] = "CPRI5",
+ [CPRI6] = "CPRI6",
+ [CPRI7] = "CPRI7",
+ [CPRI8] = "CPRI8",
+ [XAUI_FM1_MAC9] = "XAUI_FM1_MAC9",
+ [XAUI_FM1_MAC10] = "XAUI_FM1_MAC10",
+ [XAUI_FM2_MAC9] = "XAUI_FM2_MAC9",
+ [XAUI_FM2_MAC10] = "XAUI_FM2_MAC10",
+ [HIGIG_FM1_MAC9] = "HiGig_FM1_MAC9",
+ [HIGIG_FM1_MAC10] = "HiGig_FM1_MAC10",
+ [HIGIG_FM2_MAC9] = "HiGig_FM2_MAC9",
+ [HIGIG_FM2_MAC10] = "HiGig_FM2_MAC10",
+ [QSGMII_FM1_A] = "QSGMII_FM1_A",
+ [QSGMII_FM1_B] = "QSGMII_FM1_B",
+ [QSGMII_FM2_A] = "QSGMII_FM2_A",
+ [QSGMII_FM2_B] = "QSGMII_FM2_B",
+ [XFI_FM1_MAC9] = "XFI_FM1_MAC9",
+ [XFI_FM1_MAC10] = "XFI_FM1_MAC10",
+ [XFI_FM2_MAC9] = "XFI_FM2_MAC9",
+ [XFI_FM2_MAC10] = "XFI_FM2_MAC10",
+ [INTERLAKEN] = "INTERLAKEN",
+};
+#endif
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+ u64 ret = 0;
+
+ ret |= (1ULL << device) & serdes1_prtcl_map;
+ ret |= (1ULL << device) & serdes2_prtcl_map;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+ ret |= (1ULL << device) & serdes3_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+ ret |= (1ULL << device) & serdes4_prtcl_map;
+#endif
+
+ return !!ret;
+}
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
+{
+ const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 cfg = in_be32(&gur->rcwsr[4]);
+ int i;
+
+ switch (sd) {
+ case FSL_SRDS_1:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+ break;
+ case FSL_SRDS_2:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+ break;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+ case FSL_SRDS_3:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS3_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT;
+ break;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+ case FSL_SRDS_4:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
+ break;
+#endif
+ default:
+ printf("invalid SerDes%d\n", sd);
+ break;
+ }
+ /* Is serdes enabled at all? */
+ if (unlikely(cfg == 0))
+ return -ENODEV;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (serdes_get_prtcl(sd, cfg, i) == device)
+ return i;
+ }
+
+ return -ENODEV;
+}
+
+u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u64 serdes_prtcl_map = 0;
+ u32 cfg;
+ int lane;
+
+ cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask;
+ /* Is serdes enabled at all? */
+ if (!cfg) {
+ printf("SERDES%d is not enabled\n", sd + 1);
+ return 0;
+ }
+
+ cfg >>= sd_prctl_shift;
+ printf("Using SERDES%d Protocol: 0x%x\n", sd + 1, cfg);
+ if (!is_serdes_prtcl_valid(sd, cfg))
+ printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
+
+ for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
+ serdes_prtcl_map |= (1ULL << lane_prtcl);
+ }
+
+ return serdes_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+
+ serdes1_prtcl_map = serdes_init(FSL_SRDS_1,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR,
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT);
+ serdes2_prtcl_map = serdes_init(FSL_SRDS_2,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000,
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT);
+#ifdef CONFIG_SYS_FSL_SRDS_3
+ serdes3_prtcl_map = serdes_init(FSL_SRDS_3,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000,
+ FSL_CORENET2_RCWSR4_SRDS3_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+ serdes4_prtcl_map = serdes_init(FSL_SRDS_4,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_4 * 0x1000,
+ FSL_CORENET2_RCWSR4_SRDS4_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT);
+#endif
+
+}
/*
- * Copyright (C) 2003 IMMS gGmbH <www.imms.de>
+ * Copyright 2012 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- *
- * author(s): Thomas Elste, <info@elste.org>
*/
-#include <asm/types.h>
-#include <config.h>
-
-#ifdef CONFIG_DRIVER_NETARMETH
-
-#define SET_EADDR(ad,val) *(volatile unsigned int*)(ad + NETARM_ETH_MODULE_BASE) = val
-#define GET_EADDR(ad) (*(volatile unsigned int*)(ad + NETARM_ETH_MODULE_BASE))
-
-#define NA_MII_POLL_BUSY_DELAY 900
-
-/* MII negotiation timeout value
- 500 jiffies = 5 seconds */
-#define NA_MII_NEGOTIATE_DELAY 30
-
-/* Registers in the physical layer chip */
-#define MII_PHY_CONTROL 0
-#define MII_PHY_STATUS 1
-#define MII_PHY_ID 2
-#define MII_PHY_AUTONEGADV 4
+#ifndef __FSL_CORENET2_SERDES_H
+#define __FSL_CORENET2_SERDES_H
-#endif /* CONFIG_DRIVER_NETARMETH */
+int is_serdes_prtcl_valid(int serdes, u32 prtcl);
+int serdes_lane_enabled(int lane);
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
+#endif /* __FSL_CORENET2_SERDES_H */
{ 17, 163, FSL_SRDS_BANK_2 },
{ 18, 164, FSL_SRDS_BANK_2 },
{ 19, 165, FSL_SRDS_BANK_2 },
+#ifdef CONFIG_PPC_P4080
{ 20, 170, FSL_SRDS_BANK_3 },
{ 21, 171, FSL_SRDS_BANK_3 },
{ 22, 172, FSL_SRDS_BANK_3 },
{ 23, 173, FSL_SRDS_BANK_3 },
+#else
+ { 20, 166, FSL_SRDS_BANK_3 },
+ { 21, 167, FSL_SRDS_BANK_3 },
+ { 22, 168, FSL_SRDS_BANK_3 },
+ { 23, 169, FSL_SRDS_BANK_3 },
+#endif
};
int serdes_get_lane_idx(int lane)
}
-void __soc_serdes_init(void)
+static void __soc_serdes_init(void)
{
/* Allow for SoC-specific initialization in <SOC>_serdes.c */
};
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int cfg;
serdes_corenet_t *srds_regs;
+#ifdef CONFIG_PPC_P5040
+ serdes_corenet_t *srds2_regs;
+#endif
int lane, bank, idx;
int have_bank[SRDS_MAX_BANK] = {};
#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
}
}
+#ifdef CONFIG_PPC_P5040
+ /*
+ * Lanes on bank 4 on P5040 are commented-out, but for some SERDES
+ * protocols, these lanes are routed to SATA. We use serdes_prtcl_map
+ * to decide whether a protocol is supported on a given lane, so SATA
+ * will be identified as not supported, and therefore not initialized.
+ * So for protocols which use SATA on bank4, we add SATA support in
+ * serdes_prtcl_map.
+ */
+ switch (cfg) {
+ case 0x0:
+ case 0x1:
+ case 0x2:
+ case 0x3:
+ case 0x4:
+ case 0x5:
+ case 0x6:
+ case 0x7:
+ serdes_prtcl_map |= 1 << SATA1 | 1 << SATA2;
+ break;
+ default:
+ srds2_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR;
+
+ /* We don't need bank 4, so power it down */
+ setbits_be32(&srds2_regs->bank[0].rstctl, SRDS_RSTCTL_SDPD);
+ }
+#endif
+
soc_serdes_init();
#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
}
}
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004699
+ /*
+ * To avoid the situation that resulted in the P4080 erratum
+ * SERDES-8, a given SerDes bank will use the PLLs from the previous
+ * bank if one of the PLL frequencies is a multiple of the other. For
+ * instance, if bank 3 is running at 2.5GHz and bank 2 is at 1.25GHz,
+ * then bank 3 will use bank 2's PLL. P5040 Erratum A-004699 says
+ * that, in this situation, lane synchronization is not initiated. So
+ * when we detect a bank with a "borrowed" PLL, we have to manually
+ * initiate lane synchronization.
+ */
+ for (bank = FSL_SRDS_BANK_2; bank <= FSL_SRDS_BANK_3; bank++) {
+ /* Determine the first lane for this bank */
+ unsigned int lane;
+
+ for (lane = 0; lane < SRDS_MAX_LANES; lane++)
+ if (lanes[lane].bank == bank)
+ break;
+ idx = lanes[lane].idx;
+
+ /*
+ * Check if the PLL for the bank is borrowed. The UOTHL
+ * bit of the first lane will tell us that.
+ */
+ if (in_be32(&srds_regs->lane[idx].gcr0) & SRDS_GCR0_UOTHL) {
+ /* Manually start lane synchronization */
+ setbits_be32(&srds_regs->bank[bank].pllcr0,
+ SRDS_PLLCR0_PVCOCNT_EN);
+ }
+ }
+#endif
+
#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) || defined (CONFIG_SYS_P4080_ERRATUM_SERDES9)
for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
enum srds_prtcl lane_prtcl;
#ifndef __FSL_CORENET_SERDES_H
#define __FSL_CORENET_SERDES_H
-#define SRDS_MAX_LANES 18
-#define SRDS_MAX_BANK 3
-
enum srds_bank {
FSL_SRDS_BANK_1 = 0,
FSL_SRDS_BANK_2 = 1,
return liodn_bases[dpaa_dev].num_ids;
}
+#ifdef CONFIG_SYS_SRIO
static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size)
{
int i;
}
}
}
+#endif
static void set_liodn(struct liodn_id_table *tbl, int size)
{
/* setup general liodn offsets */
set_liodn(liodn_tbl, liodn_tbl_sz);
+#ifdef CONFIG_SYS_SRIO
/* setup SRIO port liodns */
set_srio_liodn(srio_liodn_tbl, srio_liodn_tbl_sz);
+#endif
/* setup SEC block liodn bases & offsets if we have one */
if (IS_E_PROCESSOR(get_svr())) {
#endif
}
+#ifdef CONFIG_SYS_SRIO
static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl)
{
int i, srio_off;
}
}
}
+#endif
+
+#define CONFIG_SYS_MAX_PCI_EPS 8
+#define CONFIG_SYS_PCI_EP_LIODN_START 256
+
+static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat)
+{
+ int off, pci_idx = 0, pci_cnt = 0, i, rc;
+ const uint32_t *base_liodn;
+ uint32_t liodn_offs[CONFIG_SYS_MAX_PCI_EPS + 1] = { 0 };
+
+ /*
+ * Count the number of pci nodes.
+ * It's needed later when the interleaved liodn offsets are generated.
+ */
+ off = fdt_node_offset_by_compatible(fdt, -1, compat);
+ while (off != -FDT_ERR_NOTFOUND) {
+ pci_cnt++;
+ off = fdt_node_offset_by_compatible(fdt, off, compat);
+ }
+
+ for (off = fdt_node_offset_by_compatible(fdt, -1, compat);
+ off != -FDT_ERR_NOTFOUND;
+ off = fdt_node_offset_by_compatible(fdt, off, compat)) {
+ base_liodn = fdt_getprop(fdt, off, "fsl,liodn", &rc);
+ if (!base_liodn) {
+ char path[64];
+
+ if (fdt_get_path(fdt, off, path, sizeof(path)) < 0)
+ strcpy(path, "(unknown)");
+ printf("WARNING Could not get liodn of node %s: %s\n",
+ path, fdt_strerror(rc));
+ continue;
+ }
+ for (i = 0; i < CONFIG_SYS_MAX_PCI_EPS; i++)
+ liodn_offs[i + 1] = CONFIG_SYS_PCI_EP_LIODN_START +
+ i * pci_cnt + pci_idx - *base_liodn;
+ rc = fdt_setprop(fdt, off, "fsl,liodn-offset-list",
+ liodn_offs, sizeof(liodn_offs));
+ if (rc) {
+ char path[64];
+
+ if (fdt_get_path(fdt, off, path, sizeof(path)) < 0)
+ strcpy(path, "(unknown)");
+ printf("WARNING Unable to set fsl,liodn-offset-list for "
+ "node %s: %s\n", path, fdt_strerror(rc));
+ continue;
+ }
+ pci_idx++;
+ }
+}
static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz)
{
void fdt_fixup_liodn(void *blob)
{
+#ifdef CONFIG_SYS_SRIO
fdt_fixup_srio_liodn(blob, srio_liodn_tbl);
+#endif
fdt_fixup_liodn_tbl(blob, liodn_tbl, liodn_tbl_sz);
#ifdef CONFIG_SYS_DPAA_FMAN
#ifdef CONFIG_SYS_DPAA_RMAN
fdt_fixup_liodn_tbl(blob, rman_liodn_tbl, rman_liodn_tbl_sz);
#endif
+
+ fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie-v2.4");
}
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
#include "mp.h"
DECLARE_GLOBAL_DATA_PTR;
+u32 fsl_ddr_get_intl3r(void);
+
+extern u32 __spin_table[];
u32 get_my_id()
{
return 0;
if (nr == id) {
- table = (u32 *)get_spin_virt_addr();
+ table = (u32 *)&__spin_table;
printf("table base @ 0x%p\n", table);
} else {
- table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
+ table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY;
printf("Running on cpu %d\n", id);
printf("\n");
printf("table @ 0x%p\n", table);
printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]);
- printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]);
- printf(" r6 - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]);
+ printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
}
return 0;
0,
BOOT_ENTRY_PIR,
BOOT_ENTRY_R3_LOWER,
- BOOT_ENTRY_R6_LOWER,
};
int cpu_release(int nr, int argc, char * const argv[])
{
- u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
+ u32 i, val, *table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY;
u64 boot_addr;
if (hold_cores_in_reset(1))
boot_addr = simple_strtoull(argv[0], NULL, 16);
- /* handle pir, r3, r6 */
- for (i = 1; i < 4; i++) {
+ /* handle pir, r3 */
+ for (i = 1; i < 3; i++) {
if (argv[i][0] != '-') {
u8 entry = boot_entry_map[i];
val = simple_strtoul(argv[i], NULL, 16);
return 0;
}
-u32 determine_mp_bootpg(void)
+u32 determine_mp_bootpg(unsigned int *pagesize)
{
- /* if we have 4G or more of memory, put the boot page at 4Gb-4k */
- if ((u64)gd->ram_size > 0xfffff000)
- return (0xfffff000);
+ u32 bootpg;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+ u32 svr = get_svr();
+ u32 granule_size, check;
+ struct law_entry e;
+#endif
- return (gd->ram_size - 4096);
-}
-ulong get_spin_phys_addr(void)
-{
- extern ulong __secondary_start_page;
- extern ulong __spin_table;
+ /* use last 4K of mapped memory */
+ bootpg = ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
+ CONFIG_MAX_MEM_MAPPED : gd->ram_size) +
+ CONFIG_SYS_SDRAM_BASE - 4096;
+ if (pagesize)
+ *pagesize = 4096;
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+/*
+ * Erratum A004468 has two parts. The 3-way interleaving applies to T4240,
+ * to be fixed in rev 2.0. The 2-way interleaving applies to many SoCs. But
+ * the way boot page chosen in u-boot avoids hitting this erratum. So only
+ * thw workaround for 3-way interleaving is needed.
+ *
+ * To make sure boot page translation works with 3-Way DDR interleaving
+ * enforce a check for the following constrains
+ * 8K granule size requires BRSIZE=8K and
+ * bootpg >> log2(BRSIZE) %3 == 1
+ * 4K and 1K granule size requires BRSIZE=4K and
+ * bootpg >> log2(BRSIZE) %3 == 0
+ */
+ if (SVR_SOC_VER(svr) == SVR_T4240 && SVR_MAJ(svr) < 2) {
+ e = find_law(bootpg);
+ switch (e.trgt_id) {
+ case LAW_TRGT_IF_DDR_INTLV_123:
+ granule_size = fsl_ddr_get_intl3r() & 0x1f;
+ if (granule_size == FSL_DDR_3WAY_8KB_INTERLEAVING) {
+ if (pagesize)
+ *pagesize = 8192;
+ bootpg &= 0xffffe000; /* align to 8KB */
+ check = bootpg >> 13;
+ while ((check % 3) != 1)
+ check--;
+ bootpg = check << 13;
+ debug("Boot page (8K) at 0x%08x\n", bootpg);
+ break;
+ } else {
+ bootpg &= 0xfffff000; /* align to 4KB */
+ check = bootpg >> 12;
+ while ((check % 3) != 0)
+ check--;
+ bootpg = check << 12;
+ debug("Boot page (4K) at 0x%08x\n", bootpg);
+ }
+ break;
+ default:
+ break;
+ }
+ }
+#endif /* CONFIG_SYS_FSL_ERRATUM_A004468 */
- return (determine_mp_bootpg() +
- (ulong)&__spin_table - (ulong)&__secondary_start_page);
+ return bootpg;
}
-ulong get_spin_virt_addr(void)
+phys_addr_t get_spin_phys_addr(void)
{
- extern ulong __secondary_start_page;
- extern ulong __spin_table;
-
- return (CONFIG_BPTR_VIRT_ADDR +
- (ulong)&__spin_table - (ulong)&__secondary_start_page);
+ return virt_to_phys(&__spin_table);
}
#ifdef CONFIG_FSL_CORENET
-static void plat_mp_up(unsigned long bootpg)
+static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
{
- u32 cpu_up_mask, whoami;
- u32 *table = (u32 *)get_spin_virt_addr();
+ u32 cpu_up_mask, whoami, brsize = LAW_SIZE_4K;
+ u32 *table = (u32 *)&__spin_table;
volatile ccsr_gur_t *gur;
volatile ccsr_local_t *ccm;
volatile ccsr_rcpm_t *rcpm;
out_be32(&ccm->bstrl, bootpg);
e = find_law(bootpg);
- out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K);
+ /* pagesize is only 4K or 8K */
+ if (pagesize == 8192)
+ brsize = LAW_SIZE_8K;
+ out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | brsize);
+ debug("BRSIZE is 0x%x\n", brsize);
/* readback to sync write */
in_be32(&ccm->bstrar);
#endif
}
#else
-static void plat_mp_up(unsigned long bootpg)
+static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
{
u32 up, cpu_up_mask, whoami;
- u32 *table = (u32 *)get_spin_virt_addr();
+ u32 *table = (u32 *)&__spin_table;
volatile u32 bpcr;
volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
void cpu_mp_lmb_reserve(struct lmb *lmb)
{
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
lmb_reserve(lmb, bootpg, 4096);
}
void setup_mp(void)
{
- extern ulong __secondary_start_page;
- extern ulong __bootpg_addr;
- ulong fixup = (ulong)&__secondary_start_page;
- u32 bootpg = determine_mp_bootpg();
+ extern u32 __secondary_start_page;
+ extern u32 __bootpg_addr, __spin_table_addr, __second_half_boot_page;
+
+ int i;
+ ulong fixup = (u32)&__secondary_start_page;
+ u32 bootpg, bootpg_map, pagesize;
+
+ bootpg = determine_mp_bootpg(&pagesize);
+
+ /*
+ * pagesize is only 4K or 8K
+ * we only use the last 4K of boot page
+ * bootpg_map saves the address for the boot page
+ * 8K is used for the workaround of 3-way DDR interleaving
+ */
+
+ bootpg_map = bootpg;
+
+ if (pagesize == 8192)
+ bootpg += 4096; /* use 2nd half */
/* Some OSes expect secondary cores to be held in reset */
if (hold_cores_in_reset(0))
return;
- /* Store the bootpg's SDRAM address for use by secondary CPU cores */
- __bootpg_addr = bootpg;
+ /*
+ * Store the bootpg's cache-able half address for use by secondary
+ * CPU cores to continue to boot
+ */
+ __bootpg_addr = (u32)virt_to_phys(&__second_half_boot_page);
+
+ /* Store spin table's physical address for use by secondary cores */
+ __spin_table_addr = (u32)get_spin_phys_addr();
+
+ /* flush bootpg it before copying invalidate any staled cacheline */
+ flush_cache(bootpg, 4096);
/* look for the tlb covering the reset page, there better be one */
- int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
+ i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
/* we found a match */
if (i != -1) {
memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096);
- plat_mp_up(bootpg);
+ plat_mp_up(bootpg_map, pagesize);
} else {
puts("WARNING: No reset page TLB. "
"Skipping secondary core setup\n");
#include <asm/mp.h>
-ulong get_spin_phys_addr(void);
-ulong get_spin_virt_addr(void);
+phys_addr_t get_spin_phys_addr(void);
u32 get_my_id(void);
int hold_cores_in_reset(int verbose);
#define BOOT_ENTRY_PIR 5
#define BOOT_ENTRY_R6_UPPER 6
#define BOOT_ENTRY_R6_LOWER 7
-#define NUM_BOOT_ENTRY 8
+#define NUM_BOOT_ENTRY 16 /* pad to 64 bytes */
#define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32))
#endif
--- /dev/null
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 2, 1, 0),
+ SET_QP_INFO(3, 4, 2, 1),
+ SET_QP_INFO(5, 6, 3, 2),
+ SET_QP_INFO(7, 8, 4, 3),
+ SET_QP_INFO(9, 10, 5, 0),
+ SET_QP_INFO(11, 12, 6, 1),
+ SET_QP_INFO(13, 14, 7, 2),
+ SET_QP_INFO(15, 16, 8, 3),
+ SET_QP_INFO(17, 18, 9, 0), /* for now, set sdest to 0 */
+ SET_QP_INFO(19, 20, 10, 0), /* for now, set sdest to 0 */
+};
+#endif
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(31),
+ SET_BMAN_LIODN(32),
+#endif
+
+ SET_SDHC_LIODN(1, 64),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 93),
+ SET_USB_LIODN(2, "fsl-usb2-dr", 94),
+
+ SET_SATA_LIODN(1, 95),
+ SET_SATA_LIODN(2, 96),
+
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 195),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 196),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 197),
+
+ SET_DMA_LIODN(1, 193),
+ SET_DMA_LIODN(2, 194),
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 6),
+ SET_FMAN_RX_1G_LIODN(1, 1, 7),
+ SET_FMAN_RX_1G_LIODN(1, 2, 8),
+ SET_FMAN_RX_1G_LIODN(1, 3, 9),
+ SET_FMAN_RX_1G_LIODN(1, 4, 10),
+ SET_FMAN_RX_10G_LIODN(1, 0, 11),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+struct liodn_id_table fman2_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(2, 0, 12),
+ SET_FMAN_RX_1G_LIODN(2, 1, 13),
+ SET_FMAN_RX_1G_LIODN(2, 2, 14),
+ SET_FMAN_RX_1G_LIODN(2, 3, 15),
+ SET_FMAN_RX_1G_LIODN(2, 4, 16),
+ SET_FMAN_RX_10G_LIODN(2, 0, 17),
+};
+int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
+#endif
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 129, 130),
+ SET_SEC_JR_LIODN_ENTRY(1, 131, 132),
+ SET_SEC_JR_LIODN_ENTRY(2, 133, 134),
+ SET_SEC_JR_LIODN_ENTRY(3, 135, 136),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 89),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 90),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 91),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 92),
+ SET_SEC_DECO_LIODN_ENTRY(0, 139, 140),
+ SET_SEC_DECO_LIODN_ENTRY(1, 141, 142),
+ SET_SEC_DECO_LIODN_ENTRY(2, 143, 144),
+ SET_SEC_DECO_LIODN_ENTRY(3, 145, 146),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+struct liodn_id_table raide_liodn_tbl[] = {
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 0, 60),
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 1, 61),
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 0, 62),
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 1, 63),
+};
+int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(64, 101),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32),
+#endif
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(160),
+#endif
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+ [FSL_HW_PORTAL_RAID_ENGINE] = SET_LIODN_BASE_1(49),
+#endif
+};
--- /dev/null
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet_serdes.h"
+
+/*
+ * Note: For P5040, the fourth SerDes bank (with two lanes) is on SerDes2, but
+ * U-boot only supports one SerDes controller. Therefore, we ignore bank 4 in
+ * this table. This works because most of the SerDes code is for errata
+ * work-arounds, and there are no P5040 errata that effect bank 4.
+ */
+
+static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
+ [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2, */ },
+ [0x01] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+ SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1,
+ XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x02] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM1_DTSEC3,
+ SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+ XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x03] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM2_DTSEC1,
+ SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3,
+ SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+ /* SATA1, SATA2 */ },
+ [0x04] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM2_DTSEC1,
+ SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3,
+ SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+ /* SATA1, SATA2 */ },
+ [0x05] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM1_DTSEC3,
+ SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+ XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x07] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1,
+ SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1,
+ XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x11] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+ AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2,
+ /* NONE, NONE */ },
+ [0x15] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+ AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1,
+ NONE, NONE, SATA1, SATA2, /* NONE, NONE */ },
+ [0x2a] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2,
+ AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, XAUI_FM2, /* NONE, NONE */ },
+ [0x34] = {PCIE1, PCIE1, PCIE1, PCIE1, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA,
+ AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE,
+ NONE, SATA1, SATA2, /* NONE, NONE */ },
+ [0x35] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, AURORA, XAUI_FM1,
+ XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, NONE, SATA1, SATA2,
+ /* NONE, NONE */ },
+ [0x36] = {PCIE1, PCIE1, PCIE3, PCIE3, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA,
+ AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE,
+ NONE, SATA1, SATA2, /* NONE, NONE */ },
+};
+
+enum srds_prtcl serdes_get_prtcl(int cfg, int lane)
+{
+ if (!serdes_lane_enabled(lane))
+ return NONE;
+
+ return serdes_cfg_tbl[cfg][lane];
+}
+
+int is_serdes_prtcl_valid(u32 prtcl)
+{
+ int i;
+
+ if (prtcl > ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (serdes_cfg_tbl[prtcl][i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
{
int off, err;
unsigned int maj, min;
+ unsigned int ip_cfg;
u32 rev_1 = in_be32(&qman->ip_rev_1);
+ u32 rev_2 = in_be32(&qman->ip_rev_2);
char compat[64];
int compat_len;
maj = (rev_1 >> 8) & 0xff;
min = rev_1 & 0xff;
+ ip_cfg = rev_2 & 0xff;
- compat_len = sprintf(compat, "fsl,qman-portal-%u.%u", maj, min) + 1;
+ compat_len = sprintf(compat, "fsl,qman-portal-%u.%u.%u",
+ maj, min, ip_cfg) + 1;
compat_len += sprintf(compat + compat_len, "fsl,qman-portal") + 1;
off = fdt_node_offset_by_compatible(blob, -1, "fsl,qman-portal");
{
int off, err;
unsigned int maj, min;
+ unsigned int ip_cfg;
u32 rev_1 = in_be32(&bman->ip_rev_1);
+ u32 rev_2 = in_be32(&bman->ip_rev_2);
char compat[64];
int compat_len;
maj = (rev_1 >> 8) & 0xff;
min = rev_1 & 0xff;
- compat_len = sprintf(compat, "fsl,bman-portal-%u.%u", maj, min) + 1;
+ ip_cfg = rev_2 & 0xff;
+
+ compat_len = sprintf(compat, "fsl,bman-portal-%u.%u.%u",
+ maj, min, ip_cfg) + 1;
compat_len += sprintf(compat + compat_len, "fsl,bman-portal") + 1;
off = fdt_node_offset_by_compatible(blob, -1, "fsl,bman-portal");
#define toreset(x) (x - __secondary_start_page + 0xfffff000)
/* get our PIR to figure out our table entry */
- lis r3,toreset(__spin_table)@h
- ori r3,r3,toreset(__spin_table)@l
+ lis r3,toreset(__spin_table_addr)@h
+ ori r3,r3,toreset(__spin_table_addr)@l
+ lwz r3,0(r3)
- /* r10 has the base address for the entry */
+ /*
+ * r10 has the base address for the entry.
+ * we cannot access it yet before setting up a new TLB
+ */
mfspr r0,SPRN_PIR
#if defined(CONFIG_E6500)
/*
* PIR definition for E6500
* 0-17 Reserved (logic 0s)
- * 8-19 CHIP_ID, 2’b00 - SoC 1
+ * 8-19 CHIP_ID, 2'b00 - SoC 1
* all others - reserved
- * 20-24 CLUSTER_ID 5’b00000 - CCM 1
+ * 20-24 CLUSTER_ID 5'b00000 - CCM 1
* all others - reserved
- * 25-26 CORE_CLUSTER_ID 2’b00 - cluster 1
- * 2’b01 - cluster 2
- * 2’b10 - cluster 3
- * 2’b11 - cluster 4
- * 27-28 CORE_ID 2’b00 - core 0
- * 2’b01 - core 1
- * 2’b10 - core 2
- * 2’b11 - core 3
- * 29-31 THREAD_ID 3’b000 - thread 0
- * 3’b001 - thread 1
+ * 25-26 CORE_CLUSTER_ID 2'b00 - cluster 1
+ * 2'b01 - cluster 2
+ * 2'b10 - cluster 3
+ * 2'b11 - cluster 4
+ * 27-28 CORE_ID 2'b00 - core 0
+ * 2'b01 - core 1
+ * 2'b10 - core 2
+ * 2'b11 - core 3
+ * 29-31 THREAD_ID 3'b000 - thread 0
+ * 3'b001 - thread 1
*/
rlwinm r4,r0,29,25,31
#elif defined(CONFIG_E500MC)
#else
mr r4,r0
#endif
- slwi r8,r4,5
+ slwi r8,r4,6 /* spin table is padded to 64 byte */
add r10,r3,r8
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
- /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
- slwi r8,r4,1
- addi r8,r8,32
- mtspr L1CSR2,r8
-#endif
-
#ifdef CONFIG_E6500
mfspr r0,SPRN_PIR
/*
mtspr SPRN_PIR,r4 /* write to PIR register */
+#ifdef CONFIG_SYS_CACHE_STASHING
+ /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+ slwi r8,r4,1
+ addi r8,r8,32
+ mtspr L1CSR2,r8
+#endif
+
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
/*
beq 2b
#endif
3:
-
-#define EPAPR_MAGIC (0x45504150)
-#define ENTRY_ADDR_UPPER 0
-#define ENTRY_ADDR_LOWER 4
-#define ENTRY_R3_UPPER 8
-#define ENTRY_R3_LOWER 12
-#define ENTRY_RESV 16
-#define ENTRY_PIR 20
-#define ENTRY_R6_UPPER 24
-#define ENTRY_R6_LOWER 28
-#define ENTRY_SIZE 32
-
- /* setup the entry */
- li r3,0
- li r8,1
- stw r4,ENTRY_PIR(r10)
- stw r3,ENTRY_ADDR_UPPER(r10)
- stw r8,ENTRY_ADDR_LOWER(r10)
- stw r3,ENTRY_R3_UPPER(r10)
- stw r4,ENTRY_R3_LOWER(r10)
- stw r3,ENTRY_R6_UPPER(r10)
- stw r3,ENTRY_R6_LOWER(r10)
-
- /* load r13 with the address of the 'bootpg' in SDRAM */
- lis r13,toreset(__bootpg_addr)@h
- ori r13,r13,toreset(__bootpg_addr)@l
+ /* setup mapping for the spin table, WIMGE=0b00100 */
+ lis r13,toreset(__spin_table_addr)@h
+ ori r13,r13,toreset(__spin_table_addr)@l
lwz r13,0(r13)
+ /* mask by 4K */
+ rlwinm r13,r13,0,0,19
- /* setup mapping for AS = 1, and jump there */
lis r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
mtspr SPRN_MAS0,r11
lis r11,(MAS1_VALID|MAS1_IPROT)@h
ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
mtspr SPRN_MAS1,r11
- oris r11,r13,(MAS2_I|MAS2_G)@h
- ori r11,r13,(MAS2_I|MAS2_G)@l
+ oris r11,r13,(MAS2_M|MAS2_G)@h
+ ori r11,r13,(MAS2_M|MAS2_G)@l
mtspr SPRN_MAS2,r11
oris r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h
ori r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l
mtspr SPRN_MAS3,r11
+ li r11,0
+ mtspr SPRN_MAS7,r11
tlbwe
- bl 1f
-1: mflr r11
/*
- * OR in 0xfff to create a mask of the bootpg SDRAM address. We use
- * this mask to fixup the cpu spin table and the address that we want
- * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the
- * bootpg is at 0x7ffff000 in SDRAM.
+ * __bootpg_addr has the address of __second_half_boot_page
+ * jump there in AS=1 space with cache enabled
*/
- ori r13,r13,0xfff
- and r11, r11, r13
- and r10, r10, r13
-
- addi r11,r11,(2f-1b)
+ lis r13,toreset(__bootpg_addr)@h
+ ori r13,r13,toreset(__bootpg_addr)@l
+ lwz r11,0(r13)
+ mtspr SPRN_SRR0,r11
mfmsr r13
ori r12,r13,MSR_IS|MSR_DS@l
-
- mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r12
rfi
+ /*
+ * Allocate some space for the SDRAM address of the bootpg.
+ * This variable has to be in the boot page so that it can
+ * be accessed by secondary cores when they come out of reset.
+ */
+ .align L1_CACHE_SHIFT
+ .globl __bootpg_addr
+__bootpg_addr:
+ .long 0
+
+ .global __spin_table_addr
+__spin_table_addr:
+ .long 0
+
+ /*
+ * This variable is set by cpu_init_r() after parsing hwconfig
+ * to enable workaround for erratum NMG_CPU_A011.
+ */
+ .align L1_CACHE_SHIFT
+ .global enable_cpu_a011_workaround
+enable_cpu_a011_workaround:
+ .long 1
+
+ /* Fill in the empty space. The actual reset vector is
+ * the last word of the page */
+__secondary_start_code_end:
+ .space 4092 - (__secondary_start_code_end - __secondary_start_page)
+__secondary_reset_vector:
+ b __secondary_start_page
+
+
+/* this is a separated page for the spin table and cacheable boot code */
+ .align L1_CACHE_SHIFT
+ .global __second_half_boot_page
+__second_half_boot_page:
+#define EPAPR_MAGIC 0x45504150
+#define ENTRY_ADDR_UPPER 0
+#define ENTRY_ADDR_LOWER 4
+#define ENTRY_R3_UPPER 8
+#define ENTRY_R3_LOWER 12
+#define ENTRY_RESV 16
+#define ENTRY_PIR 20
+#define ENTRY_SIZE 64
+ /*
+ * setup the entry
+ * r10 has the base address of the spin table.
+ * spin table is defined as
+ * struct {
+ * uint64_t entry_addr;
+ * uint64_t r3;
+ * uint32_t rsvd1;
+ * uint32_t pir;
+ * };
+ * we pad this struct to 64 bytes so each entry is in its own cacheline
+ */
+ li r3,0
+ li r8,1
+ mfspr r4,SPRN_PIR
+ stw r3,ENTRY_ADDR_UPPER(r10)
+ stw r3,ENTRY_R3_UPPER(r10)
+ stw r4,ENTRY_R3_LOWER(r10)
+ stw r3,ENTRY_RESV(r10)
+ stw r4,ENTRY_PIR(r10)
+ msync
+ stw r8,ENTRY_ADDR_LOWER(r10)
+
/* spin waiting for addr */
-2:
- lwz r4,ENTRY_ADDR_LOWER(r10)
+3: lwz r4,ENTRY_ADDR_LOWER(r10)
andi. r11,r4,1
- bne 2b
+ bne 3b
isync
/* setup IVORs to match fixed offsets */
/* mask by ~64M to setup our tlb we will jump to */
rlwinm r12,r4,0,0,5
- /* setup r3, r4, r5, r6, r7, r8, r9 */
+ /*
+ * setup r3, r4, r5, r6, r7, r8, r9
+ * r3 contains the value to put in the r3 register at secondary cpu
+ * entry. The high 32-bits are ignored on 32-bit chip implementations.
+ * 64-bit chip implementations however shall load all 64-bits
+ */
+#ifdef CONFIG_SYS_PPC64
+ ld r3,ENTRY_R3_UPPER(r10)
+#else
lwz r3,ENTRY_R3_LOWER(r10)
+#endif
li r4,0
li r5,0
- lwz r6,ENTRY_R6_LOWER(r10)
+ li r6,0
lis r7,(64*1024*1024)@h
li r8,0
li r9,0
mtspr SPRN_SRR1,r13
rfi
- /*
- * Allocate some space for the SDRAM address of the bootpg.
- * This variable has to be in the boot page so that it can
- * be accessed by secondary cores when they come out of reset.
- */
- .globl __bootpg_addr
-__bootpg_addr:
- .long 0
- .align L1_CACHE_SHIFT
+ .align 6
.globl __spin_table
__spin_table:
.space CONFIG_MAX_CPUS*ENTRY_SIZE
-
- /*
- * This variable is set by cpu_init_r() after parsing hwconfig
- * to enable workaround for erratum NMG_CPU_A011.
- */
- .align L1_CACHE_SHIFT
- .global enable_cpu_a011_workaround
-enable_cpu_a011_workaround:
- .long 1
-
- /* Fill in the empty space. The actual reset vector is
- * the last word of the page */
-__secondary_start_code_end:
- .space 4092 - (__secondary_start_code_end - __secondary_start_page)
-__secondary_reset_vector:
- b __secondary_start_page
+__spin_table_end:
+ .space 4096 - (__spin_table_end - __spin_table)
tbdf->cbd_sc |= BD_SC_READY;
}
-static void mpc85xx_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
static int mpc85xx_serial_getc(void)
{
volatile cbd_t *rbdf;
.stop = NULL,
.setbrg = mpc85xx_serial_setbrg,
.putc = mpc85xx_serial_putc,
- .puts = mpc85xx_serial_puts,
+ .puts = default_serial_puts,
.getc = mpc85xx_serial_getc,
.tstc = mpc85xx_serial_tstc,
};
void get_sys_info (sys_info_t * sysInfo)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_FSL_IFC
+ struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+ u32 ccr;
+#endif
#ifdef CONFIG_FSL_CORENET
volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
unsigned int cpu;
[13] = 2, /* CC4 PPL / 2 */
[14] = 4, /* CC4 PPL / 4 */
};
- uint lcrr_div, i, freqCC_PLL[4], rcw_tmp;
- uint ratio[4];
+ uint i, freqCC_PLL[6], rcw_tmp;
+ uint ratio[6];
unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
uint mem_pll_rat;
sysInfo->freqSystemBus = sysclk;
+#ifdef CONFIG_DDR_CLK_FREQ
+ sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ;
+#else
sysInfo->freqDDRBus = sysclk;
+#endif
sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
- mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> 17) & 0x1f;
+ mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
+ FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT)
+ & FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
if (mem_pll_rat > 2)
sysInfo->freqDDRBus *= mem_pll_rat;
else
ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f;
ratio[2] = (in_be32(&clk->pllc3gsr) >> 1) & 0x3f;
ratio[3] = (in_be32(&clk->pllc4gsr) >> 1) & 0x3f;
- for (i = 0; i < 4; i++) {
+ ratio[4] = (in_be32(&clk->pllc5gsr) >> 1) & 0x3f;
+ ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f;
+ for (i = 0; i < 6; i++) {
if (ratio[i] > 4)
freqCC_PLL[i] = sysclk * ratio[i];
else
freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i];
}
- rcw_tmp = in_be32(&gur->rcwsr[3]);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ /*
+ * Each cluster has up to 4 cores, sharing the same PLL selection.
+ * The cluster assignment is fixed per SoC. There is no way identify the
+ * assignment so far, presuming the "first configuration" which is to
+ * fill the lower cluster group first before moving up to next group.
+ * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1
+ * and core 4~7 on cluster 2
+ * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3
+ * and core 12~15 on cluster 4 if existing
+ */
for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
- u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
+ u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27)
+ & 0xf;
u32 cplx_pll = core_cplx_PLL[c_pll_sel];
+ if (cplx_pll > 3)
+ printf("Unsupported architecture configuration"
+ " in function %s\n", __func__);
+ cplx_pll += (cpu / 8) * 3;
sysInfo->freqProcessor[cpu] =
freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
}
+#define PME_CLK_SEL 0xe0000000
+#define PME_CLK_SHIFT 29
+#define FM1_CLK_SEL 0x1c000000
+#define FM1_CLK_SHIFT 26
+ rcw_tmp = in_be32(&gur->rcwsr[7]);
+
+#ifdef CONFIG_SYS_DPAA_PME
+ switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqPME = freqCC_PLL[0];
+ break;
+ case 2:
+ sysInfo->freqPME = freqCC_PLL[0] / 2;
+ break;
+ case 3:
+ sysInfo->freqPME = freqCC_PLL[0] / 3;
+ break;
+ case 4:
+ sysInfo->freqPME = freqCC_PLL[0] / 4;
+ break;
+ case 6:
+ sysInfo->freqPME = freqCC_PLL[1] / 2;
+ break;
+ case 7:
+ sysInfo->freqPME = freqCC_PLL[1] / 3;
+ break;
+ default:
+ printf("Error: Unknown PME clock select!\n");
+ case 0:
+ sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+ break;
+ }
+#endif
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ sysInfo->freqQMAN = sysInfo->freqSystemBus / 2;
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqFMan[0] = freqCC_PLL[3];
+ break;
+ case 2:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 2;
+ break;
+ case 3:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 3;
+ break;
+ case 4:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 4;
+ break;
+ case 6:
+ sysInfo->freqFMan[0] = freqCC_PLL[4] / 2;
+ break;
+ case 7:
+ sysInfo->freqFMan[0] = freqCC_PLL[4] / 3;
+ break;
+ default:
+ printf("Error: Unknown FMan1 clock select!\n");
+ case 0:
+ sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+ break;
+ }
+#if (CONFIG_SYS_NUM_FMAN) == 2
+#define FM2_CLK_SEL 0x00000038
+#define FM2_CLK_SHIFT 3
+ rcw_tmp = in_be32(&gur->rcwsr[15]);
+ switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqFMan[1] = freqCC_PLL[4];
+ break;
+ case 2:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 2;
+ break;
+ case 3:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 3;
+ break;
+ case 4:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 4;
+ break;
+ case 6:
+ sysInfo->freqFMan[1] = freqCC_PLL[3] / 2;
+ break;
+ case 7:
+ sysInfo->freqFMan[1] = freqCC_PLL[3] / 3;
+ break;
+ default:
+ printf("Error: Unknown FMan2 clock select!\n");
+ case 0:
+ sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+ break;
+ }
+#endif /* CONFIG_SYS_NUM_FMAN == 2 */
+#endif /* CONFIG_SYS_DPAA_FMAN */
+
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
+ u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
+ u32 cplx_pll = core_cplx_PLL[c_pll_sel];
+
+ sysInfo->freqProcessor[cpu] =
+ freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
+ }
#define PME_CLK_SEL 0x80000000
#define FM1_CLK_SEL 0x40000000
#define FM2_CLK_SEL 0x20000000
#define HWA_ASYNC_DIV 0x04000000
#if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2)
#define HWA_CC_PLL 1
+#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 3)
+#define HWA_CC_PLL 2
#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4)
#define HWA_CC_PLL 2
#else
#endif
#endif
-#else
- uint plat_ratio,e500_ratio,half_freqSystemBus;
-#if defined(CONFIG_FSL_LBC)
- uint lcrr_div;
-#endif
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+#else /* CONFIG_FSL_CORENET */
+ uint plat_ratio, e500_ratio, half_freqSystemBus;
int i;
#ifdef CONFIG_QE
__maybe_unused u32 qe_ratio;
#endif /* CONFIG_FSL_CORENET */
#if defined(CONFIG_FSL_LBC)
+ uint lcrr_div;
#if defined(CONFIG_SYS_LBC_LCRR)
/* We will program LCRR to this value later */
lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
sysInfo->freqLocalBus = lcrr_div;
}
#endif
+
+#if defined(CONFIG_FSL_IFC)
+ ccr = in_be32(&ifc_regs->ifc_ccr);
+ ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
+
+ sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr;
+#endif
}
*
*/
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
+#ifdef CONFIG_SYS_CACHE_STASHING
/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
li r2,(32 + 0)
mtspr L1CSR2,r2
andi. r1,r3,L1CSR0_DCE@l
beq 2b
+ .macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch
+ lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l
+ mtspr MAS0, \scratch
+ lis \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@l
+ mtspr MAS1, \scratch
+ lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+ mtspr MAS2, \scratch
+ lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l
+ mtspr MAS3, \scratch
+ lis \scratch, \phy_high@h
+ ori \scratch, \scratch, \phy_high@l
+ mtspr MAS7, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
+ .macro create_tlb0_entry esel ts tsize epn wimg rpn perm phy_high scratch
+ lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l
+ mtspr MAS0, \scratch
+ lis \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@l
+ mtspr MAS1, \scratch
+ lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+ mtspr MAS2, \scratch
+ lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l
+ mtspr MAS3, \scratch
+ lis \scratch, \phy_high@h
+ ori \scratch, \scratch, \phy_high@l
+ mtspr MAS7, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
+ .macro delete_tlb1_entry esel scratch
+ lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l
+ mtspr MAS0, \scratch
+ li \scratch, 0
+ mtspr MAS1, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
+ .macro delete_tlb0_entry esel epn wimg scratch
+ lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l
+ mtspr MAS0, \scratch
+ li \scratch, 0
+ mtspr MAS1, \scratch
+ lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+ mtspr MAS2, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL)
/*
* TLB entry for debuggging in AS1
* in AS1.
*/
- lis r6,FSL_BOOKE_MAS0(1,
- CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(1,
- CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@l
-
#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
/*
* TLB entry is created for IVPR + IVOR15 to map on valid OP code address
* bacause flash's virtual address maps to 0xff800000 - 0xffffffff.
* and this window is outside of 4K boot window.
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000,
- (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000,
- (MAS2_I|MAS2_G))@l
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+ 0, BOOKE_PAGESZ_4M, \
+ CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
+ 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
- /* The 85xx has the default boot window 0xff800000 - 0xffffffff */
- lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+ 0, BOOKE_PAGESZ_1M, \
+ CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+ CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#else
/*
* TLB entry is created for IVPR + IVOR15 to map on valid OP code address
* because "nexti" will resize TLB to 4K
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,
- (MAS2_I))@l
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+ 0, BOOKE_PAGESZ_256K, \
+ CONFIG_SYS_MONITOR_BASE, MAS2_I, \
+ CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#endif
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- tlbwe
- isync
#endif
/*
*/
/* create a temp mapping TLB0[0] for LBCR */
- lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l
-
- lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
-
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
+ create_tlb0_entry 0, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G, \
+ CONFIG_SYS_LBC_ADDR, MAS3_SW|MAS3_SR, \
+ 0, r6
/* Set LBCR register */
lis r4,CONFIG_SYS_LBCR_ADDR@h
ori r8, r8, CONFIG_SYS_CCSRBAR@l
lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h
ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l
- lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
- lis r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
- ori r1, r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
- lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h
- ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- lis r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h
- ori r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
- mtspr MAS7, r7
-#endif
- mtspr MAS0, r0
- mtspr MAS1, r1
- mtspr MAS2, r2
- mtspr MAS3, r3
- isync
- msync
- tlbwe
-
+ create_tlb0_entry 0, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, \
+ CONFIG_SYS_CCSRBAR_PHYS_LOW, MAS3_SW|MAS3_SR, \
+ CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3
/*
* Create a TLB for the current location of CCSR. Register R9 is reserved
* for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000).
*/
create_ccsr_old_tlb:
- lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
- lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h
- ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- li r7, 0 /* The default CCSR address is always a 32-bit number */
- mtspr MAS7, r7
-#endif
- mtspr MAS0, r0
- /* MAS1 is the same as above */
- mtspr MAS2, r2
- mtspr MAS3, r3
- isync
- msync
- tlbwe
+ create_tlb0_entry 1, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, \
+ CONFIG_SYS_CCSRBAR_DEFAULT, MAS3_SW|MAS3_SR, \
+ 0, r3 /* The default CCSR address is always a 32-bit number */
+
/*
* We have a TLB for what we think is the current (old) CCSR. Let's
/* Delete the temporary TLBs */
delete_temp_tlbs:
- lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
- li r1, 0
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
- mtspr MAS0, r0
- mtspr MAS1, r1
- mtspr MAS2, r2
- isync
- msync
- tlbwe
+ delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, r3
+ delete_tlb0_entry 1, CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, r3
- lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
- mtspr MAS0, r0
- mtspr MAS2, r2
- isync
- msync
- tlbwe
#endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+create_ccsr_l2_tlb:
+ /*
+ * Create a TLB for the MMR location of CCSR
+ * to access L2CSR0 register
+ */
+ create_tlb0_entry 0, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, \
+ CONFIG_SYS_CCSRBAR_PHYS_LOW + 0xC20000, MAS3_SW|MAS3_SR, \
+ CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3
+
+enable_l2_cluster_l2:
+ /* enable L2 cache */
+ lis r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@h
+ ori r3, r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@l
+ li r4, 33 /* stash id */
+ stw r4, 4(r3)
+ lis r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@h
+ ori r4, r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@l
+ sync
+ stw r4, 0(r3) /* invalidate L2 */
+1: sync
+ lwz r0, 0(r3)
+ twi 0, r0, 0
+ isync
+ and. r1, r0, r4
+ bne 1b
+ lis r4, L2CSR0_L2E@h
+ sync
+ stw r4, 0(r3) /* eanble L2 */
+delete_ccsr_l2_tlb:
+ delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3
+#endif
+
#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
#define DCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000)
#define LAW_SIZE_1M 0x13
#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
/* create a temp mapping in AS=1 to the 4M boot window */
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
+ create_tlb1_entry 15, \
+ 1, BOOKE_PAGESZ_4M, \
+ CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
+ 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
-
- /* The 85xx has the default boot window 0xff800000 - 0xffffffff */
- lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
/* create a temp mapping in AS = 1 for Flash mapping
* created by PBL for ISBC code
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry 15, \
+ 1, BOOKE_PAGESZ_1M, \
+ CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+ CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#else
/*
* create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main
* image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage.
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry 15, \
+ 1, BOOKE_PAGESZ_1M, \
+ CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+ CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#endif
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
-
/* create a temp mapping in AS=1 to the stack */
- lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l
-
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l
-
#if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \
defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH)
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
- li r10,CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH
- mtspr MAS7,r10
+ create_tlb1_entry 14, \
+ 1, BOOKE_PAGESZ_16K, \
+ CONFIG_SYS_INIT_RAM_ADDR, 0, \
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH, r6
+
#else
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry 14, \
+ 1, BOOKE_PAGESZ_16K, \
+ CONFIG_SYS_INIT_RAM_ADDR, 0, \
+ CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#endif
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
-
lis r6,MSR_IS|MSR_DS|MSR_DE@h
ori r6,r6,MSR_IS|MSR_DS|MSR_DE@l
lis r7,switch_as@h
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 27, 1, 0),
+ SET_QP_INFO(2, 28, 1, 0),
+ SET_QP_INFO(3, 29, 1, 1),
+ SET_QP_INFO(4, 30, 1, 1),
+ SET_QP_INFO(5, 31, 1, 2),
+ SET_QP_INFO(6, 32, 1, 2),
+ SET_QP_INFO(7, 33, 1, 3),
+ SET_QP_INFO(8, 34, 1, 3),
+ SET_QP_INFO(9, 35, 1, 4),
+ SET_QP_INFO(10, 36, 1, 4),
+ SET_QP_INFO(11, 37, 1, 5),
+ SET_QP_INFO(12, 38, 1, 5),
+ SET_QP_INFO(13, 39, 1, 6),
+ SET_QP_INFO(14, 40, 1, 6),
+ SET_QP_INFO(15, 41, 1, 7),
+ SET_QP_INFO(16, 42, 1, 7),
+ SET_QP_INFO(17, 43, 1, 8),
+ SET_QP_INFO(18, 44, 1, 8),
+ SET_QP_INFO(19, 45, 1, 9),
+ SET_QP_INFO(20, 46, 1, 9),
+ SET_QP_INFO(21, 47, 1, 10),
+ SET_QP_INFO(22, 48, 1, 10),
+ SET_QP_INFO(23, 49, 1, 11),
+ SET_QP_INFO(24, 50, 1, 11),
+ SET_QP_INFO(65, 89, 1, 0),
+ SET_QP_INFO(66, 90, 1, 0),
+ SET_QP_INFO(67, 91, 1, 1),
+ SET_QP_INFO(68, 92, 1, 1),
+ SET_QP_INFO(69, 93, 1, 2),
+ SET_QP_INFO(70, 94, 1, 2),
+ SET_QP_INFO(71, 95, 1, 3),
+ SET_QP_INFO(72, 96, 1, 3),
+ SET_QP_INFO(73, 97, 1, 4),
+ SET_QP_INFO(74, 98, 1, 4),
+ SET_QP_INFO(75, 99, 1, 5),
+ SET_QP_INFO(76, 100, 1, 5),
+ SET_QP_INFO(77, 101, 1, 6),
+ SET_QP_INFO(78, 102, 1, 6),
+ SET_QP_INFO(79, 103, 1, 7),
+ SET_QP_INFO(80, 104, 1, 7),
+ SET_QP_INFO(81, 105, 1, 8),
+ SET_QP_INFO(82, 106, 1, 8),
+ SET_QP_INFO(83, 107, 1, 9),
+ SET_QP_INFO(84, 108, 1, 9),
+ SET_QP_INFO(85, 109, 1, 10),
+ SET_QP_INFO(86, 110, 1, 10),
+ SET_QP_INFO(87, 111, 1, 11),
+ SET_QP_INFO(88, 112, 1, 11),
+ SET_QP_INFO(25, 51, 1, 0),
+ SET_QP_INFO(26, 52, 1, 0),
+};
+#endif
+
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+ SET_SRIO_LIODN_1(1, 307),
+ SET_SRIO_LIODN_1(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(62),
+ SET_BMAN_LIODN(63),
+#endif
+
+ SET_SDHC_LIODN(1, 552),
+
+ SET_PME_LIODN(117),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+ SET_USB_LIODN(2, "fsl-usb2-dr", 554),
+
+ SET_SATA_LIODN(1, 555),
+ SET_SATA_LIODN(2, 556),
+
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388),
+
+ SET_DMA_LIODN(1, 147),
+ SET_DMA_LIODN(2, 227),
+
+ SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+ SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+ SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+ SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+#ifdef CONFIG_SYS_PMAN
+ SET_PMAN_LIODN(1, 513),
+ SET_PMAN_LIODN(2, 514),
+ SET_PMAN_LIODN(3, 515),
+#endif
+
+ /* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 88),
+ SET_FMAN_RX_1G_LIODN(1, 1, 89),
+ SET_FMAN_RX_1G_LIODN(1, 2, 90),
+ SET_FMAN_RX_1G_LIODN(1, 3, 91),
+ SET_FMAN_RX_1G_LIODN(1, 4, 92),
+ SET_FMAN_RX_1G_LIODN(1, 5, 93),
+ SET_FMAN_RX_10G_LIODN(1, 0, 94),
+ SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#if (CONFIG_SYS_NUM_FMAN == 2)
+struct liodn_id_table fman2_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(2, 0, 88),
+ SET_FMAN_RX_1G_LIODN(2, 1, 89),
+ SET_FMAN_RX_1G_LIODN(2, 2, 90),
+ SET_FMAN_RX_1G_LIODN(2, 3, 91),
+ SET_FMAN_RX_1G_LIODN(2, 4, 92),
+ SET_FMAN_RX_1G_LIODN(2, 5, 93),
+ SET_FMAN_RX_10G_LIODN(2, 0, 94),
+ SET_FMAN_RX_10G_LIODN(2, 1, 95),
+};
+int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
+#endif
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+ SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+ SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+ SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+ SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+ SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+ SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
+ SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
+ SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
+ SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
+ SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
+ SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+ /* Set RMan block 0-3 liodn offset */
+ SET_RMAN_LIODN(0, 678),
+ SET_RMAN_LIODN(1, 679),
+ SET_RMAN_LIODN(2, 680),
+ SET_RMAN_LIODN(3, 681),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+#ifdef CONFIG_SYS_DPAA_DCE
+ [FSL_HW_PORTAL_DCE] = SET_LIODN_BASE_2(618, 694),
+#endif
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(1069),
+#endif
+#endif
+#ifdef CONFIG_SYS_DPAA_PME
+ [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(770, 846),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+ [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet2_serdes.h"
+
+struct serdes_config {
+ u32 protocol;
+ u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}},
+ {4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}},
+ {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}},
+ {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}},
+ {38, {NONE, NONE, QSGMII_FM1_B, NONE,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {40, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {46, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {48, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+ /* SerDes 2 */
+ {1, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC10, XAUI_FM2_MAC10,
+ XAUI_FM2_MAC10, XAUI_FM2_MAC10}},
+ {2, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}},
+ {4, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}},
+ {7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {14, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {23, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {26, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {38, {NONE, NONE, QSGMII_FM2_B, NONE,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {56, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ XFI_FM2_MAC10, XFI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {57, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ XFI_FM2_MAC10, XFI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {}
+};
+static struct serdes_config serdes3_cfg_tbl[] = {
+ /* SerDes 3 */
+ {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}},
+ {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}},
+ {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}},
+ {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE}},
+ {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}},
+ {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}},
+ {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ PCIE2, PCIE2, PCIE2, PCIE2}},
+ {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ PCIE2, PCIE2, PCIE2, PCIE2}},
+ {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {}
+};
+static struct serdes_config serdes4_cfg_tbl[] = {
+ /* SerDes 4 */
+ {2, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3}},
+ {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}},
+ {6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
+ {8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
+ {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA1}},
+ {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA1}},
+ {14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
+ {16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
+ {18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}},
+ {}
+};
+static struct serdes_config *serdes_cfg_tbl[] = {
+ serdes1_cfg_tbl,
+ serdes2_cfg_tbl,
+ serdes3_cfg_tbl,
+ serdes4_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == cfg)
+ return ptr->lanes[lane];
+ ptr++;
+ }
+ return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == prtcl)
+ break;
+ ptr++;
+ }
+
+ if (!ptr->protocol)
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (ptr->lanes[i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
{
int i;
unsigned int tlb_size;
- unsigned int wimge = 0;
+ unsigned int wimge = MAS2_M;
unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
unsigned int max_cam;
u64 size, memsize = (u64)memsize_in_meg << 20;
* Trap & Exception support
*/
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
{
int cnt = 0;
unsigned long i;
printf("\n");
}
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
{
int i;
}
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
}
-void
-CritcalInputException(struct pt_regs *regs)
+void CritcalInputException(struct pt_regs *regs)
{
panic("Critical Input Exception");
}
int machinecheck_count = 0;
int machinecheck_error = 0;
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
{
unsigned long fixup;
unsigned int mcsr, mcsrr0, mcsrr1, mcar;
}
}
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
panic("Alignment Exception");
}
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
{
long esr_val;
panic("Program Check Exception");
}
-void
-PITException(struct pt_regs *regs)
+void PITException(struct pt_regs *regs)
{
/*
* Reset PIT interrupt
timer_interrupt(NULL);
}
-
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
_exception(0, regs);
}
-void
-ExtIntException(struct pt_regs *regs)
+void ExtIntException(struct pt_regs *regs)
{
volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
print_backtrace((unsigned long *)regs->gpr[1]);
}
-void
-DebugException(struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
{
printf("Debugger trap at @ %lx\n", regs->nip );
show_regs(regs);
/* Probe an address by reading. If not present, return -1, otherwise
* return 0.
*/
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
{
return 0;
}
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
}
_edata = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
+
. = ALIGN(8);
__init_begin = .;
__init_end = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
{
#ifdef CONFIG_MP
int off;
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
#endif
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
return 1;
}
-u32 determine_mp_bootpg(void)
+u32 determine_mp_bootpg(unsigned int *pagesize)
{
+ if (pagesize)
+ *pagesize = 4096;
+
/* if we have 4G or more of memory, put the boot page at 4Gb-1M */
if ((u64)gd->ram_size > 0xfffff000)
return (0xfff00000);
void cpu_mp_lmb_reserve(struct lmb *lmb)
{
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
/* tell u-boot we stole a page */
lmb_reserve(lmb, bootpg, 4096);
{
extern ulong __secondary_start_page;
ulong fixup = (ulong)&__secondary_start_page;
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
u32 bootpg_va;
if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE) {
* Trap & Exception support
*/
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
{
int cnt = 0;
unsigned long i;
printf("\n");
}
-void
-show_regs(struct pt_regs *regs)
+void show_regs(struct pt_regs *regs)
{
int i;
}
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("Exception in kernel pc %lx signal %d", regs->nip, signr);
}
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
{
unsigned long fixup;
panic("machine check");
}
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler) (regs))
panic("Alignment Exception");
}
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
{
unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL;
int i, j;
panic("Program Check Exception");
}
-void
-SoftEmuException(struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler) (regs))
panic("Software Emulation Exception");
}
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler) (regs))
* If not present, return -1,
* otherwise return 0.
*/
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
{
return 0;
}
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
#endif /* !CONFIG_RMII */
-#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
+#elif !defined(CONFIG_ICU862)
/*
* Configure all of port D for MII.
*/
*((uint *) BCSR1) &= ~BCSR1_ETHEN;
#endif /* MPC860ADS */
-#if defined(CONFIG_AMX860)
- /*
- * Port B is used to control the PHY,MC68160.
- */
- immr->im_cpm.cp_pbdir |=
- (PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
-
- immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
- immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
-
- immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
- immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
-#endif /* AMX860 */
-
#ifdef CONFIG_RPXCLASSIC
*((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
*((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
*/
#if defined (CONFIG_FADS)
udelay (10000); /* wait 10 ms */
-#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
+#elif defined(CONFIG_RPXCLASSIC)
udelay (100000); /* wait 100 ms */
#endif
* Trap & Exception support
*/
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
{
int cnt = 0;
unsigned long i;
printf("\n");
}
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
{
int i;
}
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
}
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
{
unsigned long fixup;
panic("machine check");
}
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
panic("Alignment Exception");
}
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
panic("Program Check Exception");
}
-void
-SoftEmuException(struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
}
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
_exception(0, regs);
}
-void
-DebugException(struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
{
printf("Debugger trap at @ %lx\n", regs->nip );
show_regs(regs);
/* Probe an address by reading. If not present, return -1, otherwise
* return 0.
*/
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
{
#if 0
int retval;
DECLARE_GLOBAL_DATA_PTR;
-struct cpu_type cpu_type_list [] = {
+static struct cpu_type cpu_type_list[] = {
#if defined(CONFIG_MPC85xx)
CPU_TYPE_ENTRY(8533, 8533, 1),
CPU_TYPE_ENTRY(8535, 8535, 1),
CPU_TYPE_ENTRY(P4080, P4080, 8),
CPU_TYPE_ENTRY(P5010, P5010, 1),
CPU_TYPE_ENTRY(P5020, P5020, 2),
+ CPU_TYPE_ENTRY(P5021, P5021, 2),
+ CPU_TYPE_ENTRY(P5040, P5040, 4),
+ CPU_TYPE_ENTRY(T4240, T4240, 0),
+ CPU_TYPE_ENTRY(T4120, T4120, 0),
+ CPU_TYPE_ENTRY(B4860, B4860, 0),
+ CPU_TYPE_ENTRY(G4860, G4860, 0),
+ CPU_TYPE_ENTRY(G4060, G4060, 0),
+ CPU_TYPE_ENTRY(B4440, B4440, 0),
+ CPU_TYPE_ENTRY(G4440, G4440, 0),
+ CPU_TYPE_ENTRY(B4420, B4420, 0),
+ CPU_TYPE_ENTRY(B4220, B4220, 0),
CPU_TYPE_ENTRY(BSC9130, 9130, 1),
CPU_TYPE_ENTRY(BSC9131, 9131, 1),
#elif defined(CONFIG_MPC86xx)
#define compute_ppc_cpumask() 1
#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
-struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 0);
+static struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 0);
struct cpu_type *identify_cpu(u32 ver)
{
/*
* Return a 32-bit mask indicating which cores are present on this SOC.
*/
-u32 cpu_mask()
+u32 cpu_mask(void)
{
ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR;
struct cpu_type *cpu = gd->cpu;
/*
* Return the number of cores on this SOC.
*/
-int cpu_numcores() {
+int cpu_numcores(void)
+{
struct cpu_type *cpu = gd->cpu;
/*
#error "Undefined _DDR_ADDR"
#endif
-u32 fsl_ddr_get_version(void)
+static u32 fsl_ddr_get_version(void)
{
ccsr_ddr_t *ddr;
u32 ver_major_minor_errata;
/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
#if !defined(CONFIG_FSL_DDR1)
+static inline int avoid_odt_overlap(const dimm_params_t *dimm_params)
+{
+#if CONFIG_DIMM_SLOTS_PER_CTLR == 1
+ if (dimm_params[0].n_ranks == 4)
+ return 1;
+#endif
+
+#if CONFIG_DIMM_SLOTS_PER_CTLR == 2
+ if ((dimm_params[0].n_ranks == 2) &&
+ (dimm_params[1].n_ranks == 2))
+ return 1;
+
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ if (dimm_params[0].n_ranks == 4)
+ return 1;
+#endif
+#endif
+ return 0;
+}
+
/*
* DDR SDRAM Timing Configuration 0 (TIMING_CFG_0)
*
* dreams up non-zero default values to be backwards compatible.
*/
static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
+ const memctl_options_t *popts,
+ const dimm_params_t *dimm_params)
{
unsigned char trwt_mclk = 0; /* Read-to-write turnaround */
unsigned char twrt_mclk = 0; /* Write-to-read turnaround */
unsigned int data_rate = get_ddr_freq(0);
tmrd_mclk = 4;
/* set the turnaround time */
- trwt_mclk = 1;
+
+ /*
+ * for single quad-rank DIMM and two dual-rank DIMMs
+ * to avoid ODT overlap
+ */
+ if (avoid_odt_overlap(dimm_params)) {
+ twwt_mclk = 2;
+ trrt_mclk = 1;
+ }
+ /* for faster clock, need more time for data setup */
+ trwt_mclk = (data_rate/1000000 > 1800) ? 2 : 1;
+
if ((data_rate/1000000 > 1150) || (popts->memctl_interleaving))
twrt_mclk = 1;
| ((caslat_ctrl & 0xF) << 16)
| ((refrec_ctrl & 0xF) << 12)
| ((wrrec_mclk & 0x0F) << 8)
- | ((acttoact_mclk & 0x07) << 4)
- | ((wrtord_mclk & 0x07) << 0)
+ | ((acttoact_mclk & 0x0F) << 4)
+ | ((wrtord_mclk & 0x0F) << 0)
);
debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1);
}
unsigned int dqs_cfg; /* DQS configuration */
unsigned int odt_cfg = 0; /* ODT configuration */
unsigned int num_pr; /* Number of posted refreshes */
+ unsigned int slow = 0; /* DDR will be run less than 1250 */
unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */
unsigned int ap_en; /* Address Parity Enable */
unsigned int d_init; /* DRAM data initialization */
obc_cfg = 0;
#endif
+#if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7)
+ slow = get_ddr_freq(0) < 1249000000;
+#endif
+
if (popts->registered_dimm_en) {
rcw_en = 1;
ap_en = popts->ap_en;
| ((dqs_cfg & 0x3) << 26)
| ((odt_cfg & 0x3) << 21)
| ((num_pr & 0xf) << 12)
+ | ((slow & 1) << 11)
| (qd_en << 9)
| (unq_mrs_en << 8)
| ((obc_cfg & 0x1) << 6)
| ((wrlvl_start & 0x1F) << 0)
);
debug("FSLDDR: wrlvl_cntl = 0x%08x\n", ddr->ddr_wrlvl_cntl);
+ ddr->ddr_wrlvl_cntl_2 = popts->wrlvl_ctl_2;
+ debug("FSLDDR: wrlvl_cntl_2 = 0x%08x\n", ddr->ddr_wrlvl_cntl_2);
+ ddr->ddr_wrlvl_cntl_3 = popts->wrlvl_ctl_3;
+ debug("FSLDDR: wrlvl_cntl_3 = 0x%08x\n", ddr->ddr_wrlvl_cntl_3);
+
}
/* DDR Self Refresh Counter (DDR_SR_CNTR) */
debug("FSLDDR: ddr_cdr1 = 0x%08x\n", ddr->ddr_cdr1);
}
+static void set_ddr_cdr2(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
+{
+ ddr->ddr_cdr2 = popts->ddr_cdr2;
+ debug("FSLDDR: ddr_cdr2 = 0x%08x\n", ddr->ddr_cdr2);
+}
+
unsigned int
check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
{
break;
}
sa = common_dimm->base_address;
- ea = common_dimm->total_mem - 1;
+ ea = sa + common_dimm->total_mem - 1;
} else if (!popts->memctl_interleaving) {
/*
* If memory interleaving between controllers is NOT
switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
case FSL_DDR_CS0_CS1_CS2_CS3:
sa = common_dimm->base_address;
- ea = common_dimm->total_mem - 1;
+ ea = sa + common_dimm->total_mem - 1;
break;
case FSL_DDR_CS0_CS1_AND_CS2_CS3:
if ((i >= 2) && (dimm_number == 0)) {
sa >>= 24;
ea >>= 24;
- ddr->cs[i].bnds = (0
- | ((sa & 0xFFF) << 16) /* starting address MSB */
- | ((ea & 0xFFF) << 0) /* ending address MSB */
- );
+ if (cs_en) {
+ ddr->cs[i].bnds = (0
+ | ((sa & 0xFFF) << 16)/* starting address MSB */
+ | ((ea & 0xFFF) << 0) /* ending address MSB */
+ );
+ } else {
+ debug("FSLDDR: setting bnds to 0 for inactive CS\n");
+ ddr->cs[i].bnds = 0;
+ }
debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds);
- if (cs_en) {
- set_csn_config(dimm_number, i, ddr, popts, dimm_params);
- set_csn_config_2(i, ddr);
- } else
- debug("CS%d is disabled.\n", i);
+ set_csn_config(dimm_number, i, ddr, popts, dimm_params);
+ set_csn_config_2(i, ddr);
}
/*
set_ddr_eor(ddr, popts);
#if !defined(CONFIG_FSL_DDR1)
- set_timing_cfg_0(ddr, popts);
+ set_timing_cfg_0(ddr, popts, dimm_params);
#endif
set_timing_cfg_3(ddr, popts, common_dimm, cas_latency);
cas_latency, additive_latency);
set_ddr_cdr1(ddr, popts);
+ set_ddr_cdr2(ddr, popts);
set_ddr_sdram_cfg(ddr, popts, common_dimm);
ip_rev = fsl_ddr_get_version();
if (ip_rev > 0x40400)
CTRL_OPTIONS(rcw_override),
CTRL_OPTIONS(rcw_1),
CTRL_OPTIONS(rcw_2),
+ CTRL_OPTIONS(ddr_cdr1),
+ CTRL_OPTIONS(ddr_cdr2),
CTRL_OPTIONS(tCKE_clock_pulse_width_ps),
CTRL_OPTIONS(tFAW_window_four_activates_ps),
CTRL_OPTIONS(trwt_override),
CFG_REGS(timing_cfg_5),
CFG_REGS(ddr_zq_cntl),
CFG_REGS(ddr_wrlvl_cntl),
+ CFG_REGS(ddr_wrlvl_cntl_2),
+ CFG_REGS(ddr_wrlvl_cntl_3),
CFG_REGS(ddr_sr_cntr),
CFG_REGS(ddr_sdram_rcw_1),
CFG_REGS(ddr_sdram_rcw_2),
CFG_REGS(ddr_cdr2),
CFG_REGS(err_disable),
CFG_REGS(err_int_en),
+ CFG_REGS(ddr_eor),
};
static const unsigned int n_opts = ARRAY_SIZE(options);
CFG_REGS(timing_cfg_5),
CFG_REGS(ddr_zq_cntl),
CFG_REGS(ddr_wrlvl_cntl),
+ CFG_REGS(ddr_wrlvl_cntl_2),
+ CFG_REGS(ddr_wrlvl_cntl_3),
CFG_REGS(ddr_sr_cntr),
CFG_REGS(ddr_sdram_rcw_1),
CFG_REGS(ddr_sdram_rcw_2),
CFG_REGS(err_int_en),
CFG_REGS(ddr_sdram_rcw_2),
CFG_REGS(ddr_sdram_rcw_2),
-
+ CFG_REGS(ddr_eor),
};
static const unsigned int n_opts = ARRAY_SIZE(options);
CTRL_OPTIONS(rcw_override),
CTRL_OPTIONS(rcw_1),
CTRL_OPTIONS(rcw_2),
+ CTRL_OPTIONS_HEX(ddr_cdr1),
+ CTRL_OPTIONS_HEX(ddr_cdr2),
CTRL_OPTIONS(tCKE_clock_pulse_width_ps),
CTRL_OPTIONS(tFAW_window_four_activates_ps),
CTRL_OPTIONS(trwt_override),
* doesn't return
*/
do_reset(NULL, 0, 0, NULL);
+ printf("Reset didn't work\n");
}
if (strcmp(argv[0], "recompute") == 0) {
#include "ddr.h"
-unsigned int
+#if defined(CONFIG_FSL_DDR3)
+static unsigned int
compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
common_timing_params_t *outpdimm,
unsigned int number_of_dimms)
return 0;
}
+#endif
/*
* compute_lowest_common_dimm_parameters()
unsigned int
compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
common_timing_params_t *outpdimm,
- unsigned int number_of_dimms)
+ const unsigned int number_of_dimms)
{
unsigned int i, j;
temp1++;
continue;
}
+
+ /*
+ * check if quad-rank DIMM is plugged if
+ * CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined
+ * Only the board with proper design is capable
+ */
+#ifndef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
if (dimm_params[i].n_ranks == 4 && \
CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) {
printf("Found Quad-rank DIMM, not able to support.");
temp1++;
continue;
}
-
+#endif
/*
* Find minimum tCKmax_ps to find fastest slow speed,
* i.e., this is the slowest the whole system can go.
if (outpdimm->all_DIMMs_registered)
for (j = 0; j < 16; j++) {
outpdimm->rcw[j] = dimm_params[0].rcw[j];
- for (i = 1; i < number_of_dimms; i++)
+ for (i = 1; i < number_of_dimms; i++) {
+ if (!dimm_params[i].n_ranks)
+ continue;
if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) {
temp1 = 1;
break;
}
+ }
}
if (temp1 != 0)
sizeof(generic_spd_eeprom_t));
if (ret) {
- printf("DDR: failed to read SPD from address %u\n", i2c_address);
+ if (i2c_address ==
+#ifdef SPD_EEPROM_ADDRESS
+ SPD_EEPROM_ADDRESS
+#elif defined(SPD_EEPROM_ADDRESS1)
+ SPD_EEPROM_ADDRESS1
+#endif
+ ) {
+ printf("DDR: failed to read SPD from address %u\n",
+ i2c_address);
+ } else {
+ debug("DDR: failed to read SPD from address %u\n",
+ i2c_address);
+ }
memset(spd, 0, sizeof(generic_spd_eeprom_t));
}
}
#endif
total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0);
+ /* setup 3-way interleaving before enabling DDRC */
+ switch (info.memctl_opts[0].memctl_interleaving_mode) {
+ case FSL_DDR_3WAY_1KB_INTERLEAVING:
+ case FSL_DDR_3WAY_4KB_INTERLEAVING:
+ case FSL_DDR_3WAY_8KB_INTERLEAVING:
+ fsl_ddr_set_intl3r(info.memctl_opts[0].memctl_interleaving_mode);
+ break;
+ default:
+ break;
+ }
+
/* Program configuration registers. */
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
debug("Programming controller %u\n", i);
case FSL_DDR_3WAY_8KB_INTERLEAVING:
law_memctl = LAW_TRGT_IF_DDR_INTLV_123;
if (i == 0) {
- fsl_ddr_set_intl3r(info.memctl_opts[i].memctl_interleaving_mode);
fsl_ddr_set_lawbar(&info.common_timing_params[i],
law_memctl, i);
}
}
};
#endif
+
+/*
+ * Automatically seleect bank interleaving mode based on DIMMs
+ * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null.
+ * This function only deal with one or two slots per controller.
+ */
+static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm)
+{
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+ if (pdimm[0].n_ranks == 4)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+ else if (pdimm[0].n_ranks == 2)
+ return FSL_DDR_CS0_CS1;
+#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ if (pdimm[0].n_ranks == 4)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+#endif
+ if (pdimm[0].n_ranks == 2) {
+ if (pdimm[1].n_ranks == 2)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+ else
+ return FSL_DDR_CS0_CS1;
+ }
+#endif
+ return 0;
+}
+
unsigned int populate_memctl_options(int all_DIMMs_registered,
memctl_options_t *popts,
dimm_params_t *pdimm,
}
} else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
switch (pdimm[0].n_ranks) {
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ case 4:
+ pdodt = single_Q;
+ if (pdimm[1].n_ranks)
+ printf("Error: Quad- and Dual-rank DIMMs "
+ "cannot be used together\n");
+ break;
+#endif
case 2:
switch (pdimm[1].n_ranks) {
case 2:
else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
"cs0_cs1_cs2_cs3", buf))
popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
+ else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+ "auto", buf))
+ popts->ba_intlv_ctl = auto_bank_intlv(pdimm);
else
printf("hwconfig has unrecognized parameter for bank_intlv.\n");
switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
"interleaving disabled!\n", ctrl_num);
}
#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ if (pdimm[0].n_ranks == 4)
+ break;
+#endif
if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(chip-select) for "
break;
}
debug("%d of %d controllers are interleaving.\n", j, k);
- if (j != k) {
+ if (j && (j != k)) {
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
pinfo->memctl_opts[i].memctl_interleaving = 0;
printf("Not all controllers have compatible "
#endif
}
+u32 fsl_ddr_get_intl3r(void)
+{
+ u32 val = 0;
+#ifdef CONFIG_E6500
+ u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
+ val = *mcintl3r;
+#endif
+ return val;
+}
+
void board_add_ram_info(int use_default)
{
#if defined(CONFIG_MPC83xx)
uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg);
int cas_lat;
+#if CONFIG_NUM_DDR_CONTROLLERS >= 2
+ if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
+ ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+ sdram_cfg = in_be32(&ddr->sdram_cfg);
+ }
+#endif
+#if CONFIG_NUM_DDR_CONTROLLERS >= 3
+ if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
+ ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+ sdram_cfg = in_be32(&ddr->sdram_cfg);
+ }
+#endif
puts(" (DDR");
switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
SDRAM_CFG_SDRAM_TYPE_SHIFT) {
const char *phys[] = { "ulpi", "utmi" };
const char *mode = NULL;
const char *phy_type = NULL;
+ const char *dr_mode_type = NULL;
+ const char *dr_phy_type = NULL;
char usb1_defined = 0;
int usb_mode_off = -1;
int usb_phy_off = -1;
break;
}
}
+
for (j = 0; j < ARRAY_SIZE(phys); j++) {
if (hwconfig_subarg_cmp(str, "phy_type",
phys[j])) {
break;
}
}
- if (mode_idx >= 0) {
- usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
- modes[mode_idx], NULL, usb_mode_off);
- if (usb_mode_off < 0)
- return;
- }
- if (phy_idx >= 0) {
- usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
- NULL, phys[phy_idx], usb_phy_off);
- if (usb_phy_off < 0)
- return;
- }
+
+ dr_mode_type = modes[mode_idx];
+ dr_phy_type = phys[phy_idx];
+
+ /* use usb_dr_mode and usb_phy_type if
+ usb1_defined = 0; these variables are to
+ be deprecated */
if (!strcmp(str, "usb1"))
usb1_defined = 1;
- if (mode_idx < 0 && phy_idx < 0)
+
+ if (mode_idx < 0 && phy_idx < 0) {
printf("WARNING: invalid phy or mode\n");
+ return;
+ }
}
+
+ usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
+ dr_mode_type, NULL, usb_mode_off);
+
+ if (usb_mode_off < 0)
+ return;
+
+ usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
+ NULL, dr_phy_type, usb_phy_off);
+
+ if (usb_phy_off < 0)
+ return;
}
+
if (!usb1_defined) {
int usb_off = -1;
mode = getenv("usb_dr_mode");
phy_type = getenv("usb_phy_type");
- if (!mode && !phy_type)
- return;
- fdt_fixup_usb_mode_phy_type(blob, mode, phy_type, usb_off);
+ if (mode || phy_type) {
+ printf("WARNING: usb_dr_mode and usb_phy_type "
+ "are to be deprecated soon. Use "
+ "hwconfig to set these values instead!!\n");
+ fdt_fixup_usb_mode_phy_type(blob, mode,
+ phy_type, usb_off);
+ }
}
}
#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
#ifdef CONFIG_MPC85xx
/* Boards should provide their own version of this if they use lbc sdram */
-void __lbc_sdram_init(void)
+static void __lbc_sdram_init(void)
{
/* Do nothing */
}
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_srio.h>
+#include <asm/errno.h>
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define SRIO_PORT_ACCEPT_ALL 0x10000001
#define SRIO_IB_ATMU_AR 0x80f55000
#define SRIO_OB_ATMU_AR_MAINT 0x80077000
#define SRIO_MAINT_WIN_SIZE 0x1000000 /* 16M */
#define SRIO_RW_WIN_SIZE 0x100000 /* 1M */
#define SRIO_LCSBA1CSR 0x60000000
+#endif
#if defined(CONFIG_FSL_CORENET)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR3_SRIO1
+ #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR3_SRIO2
+#else
#define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1
#define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR_SRIO2
+#endif
#define _DEVDISR_RMU FSL_CORENET_DEVDISR_RMU
#define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
#elif defined(CONFIG_MPC85xx)
#error "No defines for DEVDISR_SRIO"
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+/*
+ * Erratum A-004034
+ * Affects: SRIO
+ * Description: During port initialization, the SRIO port performs
+ * lane synchronization (detecting valid symbols on a lane) and
+ * lane alignment (coordinating multiple lanes to receive valid data
+ * across lanes). Internal errors in lane synchronization and lane
+ * alignment may cause failure to achieve link initialization at
+ * the configured port width.
+ * An SRIO port configured as a 4x port may see one of these scenarios:
+ * 1. One or more lanes fails to achieve lane synchronization. Depending
+ * on which lanes fail, this may result in downtraining from 4x to 1x
+ * on lane 0, 4x to 1x on lane R (redundant lane).
+ * 2. The link may fail to achieve lane alignment as a 4x, even though
+ * all 4 lanes achieve lane synchronization, and downtrain to a 1x.
+ * An SRIO port configured as a 1x port may fail to complete port
+ * initialization (PnESCSR[PU] never deasserts) because of scenario 1.
+ * Impact: SRIO port may downtrain to 1x, or may fail to complete
+ * link initialization. Once a port completes link initialization
+ * successfully, it will operate normally.
+ */
+static int srio_erratum_a004034(u8 port)
+{
+ serdes_corenet_t *srds_regs;
+ u32 conf_lane;
+ u32 init_lane;
+ int idx, first, last;
+ u32 i;
+ unsigned long long end_tick;
+ struct ccsr_rio *srio_regs = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
+
+ srds_regs = (void *)(CONFIG_SYS_FSL_CORENET_SERDES_ADDR);
+ conf_lane = (in_be32((void *)&srds_regs->srdspccr0)
+ >> (12 - port * 4)) & 0x3;
+ init_lane = (in_be32((void *)&srio_regs->lp_serial
+ .port[port].pccsr) >> 27) & 0x7;
+
+ /*
+ * Start a counter set to ~2 ms after the SERDES reset is
+ * complete (SERDES SRDSBnRSTCTL[RST_DONE]=1 for n
+ * corresponding to the SERDES bank/PLL for the SRIO port).
+ */
+ if (in_be32((void *)&srds_regs->bank[0].rstctl)
+ & SRDS_RSTCTL_RSTDONE) {
+ /*
+ * Poll the port uninitialized status (SRIO PnESCSR[PO]) until
+ * PO=1 or the counter expires. If the counter expires, the
+ * port has failed initialization: go to recover steps. If PO=1
+ * and the desired port width is 1x, go to normal steps. If
+ * PO = 1 and the desired port width is 4x, go to recover steps.
+ */
+ end_tick = usec2ticks(2000) + get_ticks();
+ do {
+ if (in_be32((void *)&srio_regs->lp_serial
+ .port[port].pescsr) & 0x2) {
+ if (conf_lane == 0x1)
+ goto host_ok;
+ else {
+ if (init_lane == 0x2)
+ goto host_ok;
+ else
+ break;
+ }
+ }
+ } while (end_tick > get_ticks());
+
+ /* recover at most 3 times */
+ for (i = 0; i < 3; i++) {
+ /* Set SRIO PnCCSR[PD]=1 */
+ setbits_be32((void *)&srio_regs->lp_serial
+ .port[port].pccsr,
+ 0x800000);
+ /*
+ * Set SRIO PnPCR[OBDEN] on the host to
+ * enable the discarding of any pending packets.
+ */
+ setbits_be32((void *)&srio_regs->impl.port[port].pcr,
+ 0x04);
+ /* Wait 50 us */
+ udelay(50);
+ /* Run sync command */
+ isync();
+
+ if (port)
+ first = serdes_get_first_lane(SRIO2);
+ else
+ first = serdes_get_first_lane(SRIO1);
+ if (unlikely(first < 0))
+ return -ENODEV;
+ if (conf_lane == 0x1)
+ last = first;
+ else
+ last = first + 3;
+ /*
+ * Set SERDES BnGCRm0[RRST]=0 for each SRIO
+ * bank n and lane m.
+ */
+ for (idx = first; idx <= last; idx++)
+ clrbits_be32(&srds_regs->lane[idx].gcr0,
+ SRDS_GCR0_RRST);
+ /*
+ * Read SERDES BnGCRm0 for each SRIO
+ * bank n and lane m
+ */
+ for (idx = first; idx <= last; idx++)
+ in_be32(&srds_regs->lane[idx].gcr0);
+ /* Run sync command */
+ isync();
+ /* Wait >= 100 ns */
+ udelay(1);
+ /*
+ * Set SERDES BnGCRm0[RRST]=1 for each SRIO
+ * bank n and lane m.
+ */
+ for (idx = first; idx <= last; idx++)
+ setbits_be32(&srds_regs->lane[idx].gcr0,
+ SRDS_GCR0_RRST);
+ /*
+ * Read SERDES BnGCRm0 for each SRIO
+ * bank n and lane m
+ */
+ for (idx = first; idx <= last; idx++)
+ in_be32(&srds_regs->lane[idx].gcr0);
+ /* Run sync command */
+ isync();
+ /* Wait >= 300 ns */
+ udelay(1);
+
+ /* Write 1 to clear all bits in SRIO PnSLCSR */
+ out_be32((void *)&srio_regs->impl.port[port].slcsr,
+ 0xffffffff);
+ /* Clear SRIO PnPCR[OBDEN] on the host */
+ clrbits_be32((void *)&srio_regs->impl.port[port].pcr,
+ 0x04);
+ /* Set SRIO PnCCSR[PD]=0 */
+ clrbits_be32((void *)&srio_regs->lp_serial
+ .port[port].pccsr,
+ 0x800000);
+ /* Wait >= 24 ms */
+ udelay(24000);
+ /* Poll the state of the port again */
+ init_lane =
+ (in_be32((void *)&srio_regs->lp_serial
+ .port[port].pccsr) >> 27) & 0x7;
+ if (in_be32((void *)&srio_regs->lp_serial
+ .port[port].pescsr) & 0x2) {
+ if (conf_lane == 0x1)
+ goto host_ok;
+ else {
+ if (init_lane == 0x2)
+ goto host_ok;
+ }
+ }
+ if (i == 2)
+ return -ENODEV;
+ }
+ } else
+ return -ENODEV;
+
+host_ok:
+ /* Poll PnESCSR[OES] on the host until it is clear */
+ end_tick = usec2ticks(1000000) + get_ticks();
+ do {
+ if (!(in_be32((void *)&srio_regs->lp_serial.port[port].pescsr)
+ & 0x10000)) {
+ out_be32(((void *)&srio_regs->lp_serial
+ .port[port].pescsr), 0xffffffff);
+ out_be32(((void *)&srio_regs->phys_err
+ .port[port].edcsr), 0);
+ out_be32(((void *)&srio_regs->logical_err.ltledcsr), 0);
+ return 0;
+ }
+ } while (end_tick > get_ticks());
+
+ return -ENODEV;
+}
+#endif
+
void srio_init(void)
{
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR;
int srio1_used = 0, srio2_used = 0;
+ u32 *devdisr;
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ devdisr = &gur->devdisr3;
+#else
+ devdisr = &gur->devdisr;
+#endif
if (is_serdes_configured(SRIO1)) {
set_next_law(CONFIG_SYS_SRIO1_MEM_PHYS,
law_size_bits(CONFIG_SYS_SRIO1_MEM_SIZE),
LAW_TRGT_IF_RIO_1);
srio1_used = 1;
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+ if (srio_erratum_a004034(0) < 0)
+ printf("SRIO1: enabled but port error\n");
+ else
+#endif
printf("SRIO1: enabled\n");
} else {
printf("SRIO1: disabled\n");
law_size_bits(CONFIG_SYS_SRIO2_MEM_SIZE),
LAW_TRGT_IF_RIO_2);
srio2_used = 1;
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+ if (srio_erratum_a004034(1) < 0)
+ printf("SRIO2: enabled but port error\n");
+ else
+#endif
printf("SRIO2: enabled\n");
+
} else {
printf("SRIO2: disabled\n");
}
#ifdef CONFIG_FSL_CORENET
/* On FSL_CORENET devices we can disable individual ports */
if (!srio1_used)
- setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1);
+ setbits_be32(devdisr, _DEVDISR_SRIO1);
if (!srio2_used)
- setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2);
+ setbits_be32(devdisr, _DEVDISR_SRIO2);
#endif
/* neither port is used - disable everything */
if (!srio1_used && !srio2_used) {
- setbits_be32(&gur->devdisr, _DEVDISR_SRIO1);
- setbits_be32(&gur->devdisr, _DEVDISR_SRIO2);
- setbits_be32(&gur->devdisr, _DEVDISR_RMU);
+ setbits_be32(devdisr, _DEVDISR_SRIO1);
+ setbits_be32(devdisr, _DEVDISR_SRIO2);
+ setbits_be32(devdisr, _DEVDISR_RMU);
}
}
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
void srio_boot_master(int port)
{
struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
* Trap & Exception support
*/
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
{
int cnt = 0;
unsigned long i;
printf("\n");
}
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
{
int i;
}
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("Exception");
}
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
{
unsigned long fixup, val;
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
panic("machine check");
}
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
panic("Alignment Exception");
}
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
{
long esr_val;
panic("Program Check Exception");
}
-void
-DecrementerPITException(struct pt_regs *regs)
+void DecrementerPITException(struct pt_regs *regs)
{
/*
* Reset PIT interrupt
}
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
_exception(0, regs);
}
-void
-DebugException(struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
{
printf("Debugger trap at @ %lx\n", regs->nip );
show_regs(regs);
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
#error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file."
#endif
+#define FSL_DDR_VER_4_7 47
+
/* Number of TLB CAM entries we have on FSL Book-E chips */
#if defined(CONFIG_E500MC)
#define CONFIG_SYS_NUM_TLBCAMS 64
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#elif defined(CONFIG_PPC_P2041) /* also supports P2040 */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
+#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
#elif defined(CONFIG_PPC_P3041)
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
+#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
#elif defined(CONFIG_PPC_P4080) /* also supports P4040 */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_MAX_CPUS 8
#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_ESDHC135
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC136
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC13
#define CONFIG_SYS_P4080_ERRATUM_CPU22
#define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
#define CONFIG_SYS_P4080_ERRATUM_SERDES8
#define CONFIG_SYS_P4080_ERRATUM_SERDES_A005
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_ERRATUM_A004510
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x20
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
+#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
#elif defined(CONFIG_PPC_P5020) /* also supports P5010 */
+#define CONFIG_SYS_PPC64 /* 64-bit core */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_ERRATUM_A004510
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xc0000000
+#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+
+#elif defined(CONFIG_PPC_P5040)
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
+#define CONFIG_MAX_CPUS 4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 3
+#define CONFIG_SYS_FSL_NUM_LAWS 32
+#define CONFIG_SYS_FSL_SEC_COMPAT 4
+#define CONFIG_SYS_NUM_FMAN 2
+#define CONFIG_SYS_NUM_FM1_DTSEC 5
+#define CONFIG_SYS_NUM_FM1_10GEC 1
+#define CONFIG_SYS_NUM_FM2_DTSEC 5
+#define CONFIG_SYS_NUM_FM2_10GEC 1
+#define CONFIG_NUM_DDR_CONTROLLERS 2
+#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
+#define CONFIG_SYS_FSL_TBCLK_DIV 16
+#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define CONFIG_SYS_FSL_ERRATUM_USB138
+#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
+#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_ERRATUM_A004699
+#define CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC
+#define CONFIG_SYS_FSL_ERRATUM_A004510
+#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10
+#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
#elif defined(CONFIG_BSC9131)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#elif defined(CONFIG_PPC_T4240)
+#define CONFIG_SYS_PPC64 /* 64-bit core */
+#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
+#define CONFIG_MAX_CPUS 12
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 5
+#define CONFIG_SYS_FSL_NUM_LAWS 32
+#define CONFIG_SYS_FSL_SRDS_3
+#define CONFIG_SYS_FSL_SRDS_4
+#define CONFIG_SYS_FSL_SEC_COMPAT 4
+#define CONFIG_SYS_NUM_FMAN 2
+#define CONFIG_SYS_NUM_FM1_DTSEC 8
+#define CONFIG_SYS_NUM_FM1_10GEC 2
+#define CONFIG_SYS_NUM_FM2_DTSEC 8
+#define CONFIG_SYS_NUM_FM2_10GEC 2
+#define CONFIG_NUM_DDR_CONTROLLERS 3
+#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
+#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
+#define CONFIG_SYS_FSL_TBCLK_DIV 16
+#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v3.0"
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_FSL_ERRATUM_A004468
+#define CONFIG_SYS_FSL_ERRATUM_A_004934
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
+
+#elif defined(CONFIG_PPC_B4860)
+#define CONFIG_SYS_PPC64 /* 64-bit core */
+#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
+#define CONFIG_MAX_CPUS 4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
+#define CONFIG_SYS_FSL_NUM_LAWS 32
+#define CONFIG_SYS_FSL_SEC_COMPAT 4
+#define CONFIG_SYS_NUM_FMAN 1
+#define CONFIG_SYS_NUM_FM1_DTSEC 6
+#define CONFIG_SYS_NUM_FM1_10GEC 2
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
+#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
+#define CONFIG_SYS_FSL_TBCLK_DIV 16
+#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
+#define CONFIG_SYS_FSL_ERRATUM_A_004934
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
+
#else
#error Processor type not defined for this platform
#endif
#define FSL_DDR_4WAY_4KB_INTERLEAVING 0x1C
#define FSL_DDR_4WAY_8KB_INTERLEAVING 0x1D
+#define SDRAM_CS_CONFIG_EN 0x80000000
+
/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
*/
#define SDRAM_CFG_MEM_EN 0x80000000
#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24
#define SDRAM_CFG_DYN_PWR 0x00200000
#define SDRAM_CFG_DBW_MASK 0x00180000
+#define SDRAM_CFG_DBW_SHIFT 19
#define SDRAM_CFG_32_BE 0x00080000
#define SDRAM_CFG_16_BE 0x00100000
#define SDRAM_CFG_8_BE 0x00040000
/* DDR_CDR1 */
#define DDR_CDR1_DHC_EN 0x80000000
+#define DDR_CDR1_ODT_SHIFT 17
+#define DDR_CDR1_ODT_MASK 0x6
+#define DDR_CDR2_ODT_MASK 0x1
+#define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT)
+#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
+
+#if (defined(CONFIG_SYS_FSL_DDR_VER) && \
+ (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
+#define DDR_CDR_ODT_OFF 0x0
+#define DDR_CDR_ODT_120ohm 0x1
+#define DDR_CDR_ODT_180ohm 0x2
+#define DDR_CDR_ODT_75ohm 0x3
+#define DDR_CDR_ODT_110ohm 0x4
+#define DDR_CDR_ODT_60hm 0x5
+#define DDR_CDR_ODT_70ohm 0x6
+#define DDR_CDR_ODT_47ohm 0x7
+#else
+#define DDR_CDR_ODT_75ohm 0x0
+#define DDR_CDR_ODT_55ohm 0x1
+#define DDR_CDR_ODT_60ohm 0x2
+#define DDR_CDR_ODT_50ohm 0x3
+#define DDR_CDR_ODT_150ohm 0x4
+#define DDR_CDR_ODT_43ohm 0x5
+#define DDR_CDR_ODT_120ohm 0x6
+#endif
/* Record of register values computed */
typedef struct fsl_ddr_cfg_regs_s {
unsigned int timing_cfg_5;
unsigned int ddr_zq_cntl;
unsigned int ddr_wrlvl_cntl;
+ unsigned int ddr_wrlvl_cntl_2;
+ unsigned int ddr_wrlvl_cntl_3;
unsigned int ddr_sr_cntr;
unsigned int ddr_sdram_rcw_1;
unsigned int ddr_sdram_rcw_2;
unsigned int wrlvl_override;
unsigned int wrlvl_sample; /* Write leveling */
unsigned int wrlvl_start;
+ unsigned int wrlvl_ctl_2;
+ unsigned int wrlvl_ctl_3;
unsigned int half_strength_driver_enable;
unsigned int twoT_en;
unsigned int rcw_2;
/* control register 1 */
unsigned int ddr_cdr1;
+ unsigned int ddr_cdr2;
unsigned int trwt_override;
unsigned int trwt; /* read-to-write turnaround */
extern int fsl_use_spd(void);
extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num);
+u32 fsl_ddr_get_intl3r(void);
/*
* The 85xx boards have a common prototype for fixed_sdram so put the
u8 res[4*1024];
} fm_10gec_mdio_t;
+typedef struct fm_memac {
+ u8 res[4*1024];
+} fm_memac_t;
+
+typedef struct fm_memac_mdio {
+ u8 res[4*1024];
+} fm_memac_mdio_t;
+
typedef struct fm_1588 {
u8 res[4*1024];
} fm_1588_t;
u8 res1[8*1024];
fm_soft_parser_t fm_soft_parser;
u8 res2[96*1024];
+#ifdef CONFIG_SYS_FMAN_V3
+ struct {
+ fm_memac_t fm_memac;
+ fm_memac_mdio_t fm_memac_mdio;
+ } memac[10];
+ u8 res4[32*1024];
+ fm_memac_mdio_t fm_dedicated_mdio[2];
+#else
struct {
fm_dtsec_t fm_dtesc;
fm_mdio_t fm_mdio;
fm_10gec_mdio_t fm_10gec_mdio;
} mac_10g[1];
u8 res4[48*1024];
+#endif
fm_1588_t fm_1588;
u8 res5[4*1024];
} ccsr_fman_t;
SET_GUTS_LIODN(compat, liodn, pex##pciNum##liodnr,\
CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)
+#define SET_PCI_LIODN_BASE(compat, pciNum, liodn) \
+ SET_LIODN_ENTRY_1(compat, liodn,\
+ offsetof(ccsr_pcix_t, liodn_base) + CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET,\
+ CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)
+
/* reg nodes for DMA start @ 0x300 */
#define SET_DMA_LIODN(dmaNum, liodn) \
SET_GUTS_LIODN("fsl,eloplus-dma", liodn, dma##dmaNum##liodnr,\
CONFIG_SYS_FSL_CORENET_PME_OFFSET, \
CONFIG_SYS_FSL_CORENET_PME_OFFSET)
+#define SET_PMAN_LIODN(num, liodn) \
+ SET_LIODN_ENTRY_2("fsl,pman", liodn, 0, \
+ offsetof(struct ccsr_pman, ppa1) + \
+ CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET, \
+ CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET)
+
/* -1 from portID due to how immap has the registers */
#define FM_PPID_RX_PORT_OFFSET(fmNum, portID) \
CONFIG_SYS_FSL_FM##fmNum##_OFFSET + \
extern struct liodn_id_table liodn_tbl[], liodn_bases[], sec_liodn_tbl[];
extern struct liodn_id_table raide_liodn_tbl[];
extern struct liodn_id_table fman1_liodn_tbl[], fman2_liodn_tbl[];
+#ifdef CONFIG_SYS_SRIO
extern struct srio_liodn_id_table srio_liodn_tbl[];
+extern int srio_liodn_tbl_sz;
+#endif
extern struct liodn_id_table rman_liodn_tbl[];
extern int liodn_tbl_sz, sec_liodn_tbl_sz, raide_liodn_tbl_sz;
extern int fman1_liodn_tbl_sz, fman2_liodn_tbl_sz;
-extern int srio_liodn_tbl_sz;
extern int rman_liodn_tbl_sz;
#endif
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MEMAC_H__
+#define __MEMAC_H__
+
+#include <phy.h>
+
+struct memac {
+ /* memac general control and status registers */
+ u32 res_0[2];
+ u32 command_config; /* Control and configuration register */
+ u32 mac_addr_0; /* Lower 32 bits of 48-bit MAC address */
+ u32 mac_addr_1; /* Upper 16 bits of 48-bit MAC address */
+ u32 maxfrm; /* Maximum frame length register */
+ u32 res_18[5];
+ u32 hashtable_ctrl; /* Hash table control register */
+ u32 res_30[4];
+ u32 ievent; /* Interrupt event register */
+ u32 tx_ipg_length; /* Transmitter inter-packet-gap register */
+ u32 res_48;
+ u32 imask; /* interrupt mask register */
+ u32 res_50;
+ u32 cl_pause_quanta[4]; /* CL01-CL67 pause quanta register */
+ u32 cl_pause_thresh[4]; /* CL01-CL67 pause thresh register */
+ u32 rx_pause_status; /* Receive pause status register */
+ u32 res_78[2];
+ u32 mac_addr[14]; /* MAC address */
+ u32 lpwake_timer; /* EEE low power wakeup timer register */
+ u32 sleep_timer; /* Transmit EEE Low Power Timer register */
+ u32 res_c0[8];
+ u32 statn_config; /* Statistics configuration register */
+ u32 res_e4[7];
+
+ /* memac statistics counter registers */
+ u32 rx_eoct_l; /* Rx ethernet octests lower */
+ u32 rx_eoct_u; /* Rx ethernet octests upper */
+ u32 rx_oct_l; /* Rx octests lower */
+ u32 rx_oct_u; /* Rx octests upper */
+ u32 rx_align_err_l; /* Rx alignment error lower */
+ u32 rx_align_err_u; /* Rx alignment error upper */
+ u32 rx_pause_frame_l; /* Rx valid pause frame upper */
+ u32 rx_pause_frame_u; /* Rx valid pause frame upper */
+ u32 rx_frame_l; /* Rx frame counter lower */
+ u32 rx_frame_u; /* Rx frame counter upper */
+ u32 rx_frame_crc_err_l; /* Rx frame check sequence error lower */
+ u32 rx_frame_crc_err_u; /* Rx frame check sequence error upper */
+ u32 rx_vlan_l; /* Rx VLAN frame lower */
+ u32 rx_vlan_u; /* Rx VLAN frame upper */
+ u32 rx_err_l; /* Rx frame error lower */
+ u32 rx_err_u; /* Rx frame error upper */
+ u32 rx_uni_l; /* Rx unicast frame lower */
+ u32 rx_uni_u; /* Rx unicast frame upper */
+ u32 rx_multi_l; /* Rx multicast frame lower */
+ u32 rx_multi_u; /* Rx multicast frame upper */
+ u32 rx_brd_l; /* Rx broadcast frame lower */
+ u32 rx_brd_u; /* Rx broadcast frame upper */
+ u32 rx_drop_l; /* Rx dropped packets lower */
+ u32 rx_drop_u; /* Rx dropped packets upper */
+ u32 rx_pkt_l; /* Rx packets lower */
+ u32 rx_pkt_u; /* Rx packets upper */
+ u32 rx_undsz_l; /* Rx undersized packet lower */
+ u32 rx_undsz_u; /* Rx undersized packet upper */
+ u32 rx_64_l; /* Rx 64 oct packet lower */
+ u32 rx_64_u; /* Rx 64 oct packet upper */
+ u32 rx_127_l; /* Rx 65 to 127 oct packet lower */
+ u32 rx_127_u; /* Rx 65 to 127 oct packet upper */
+ u32 rx_255_l; /* Rx 128 to 255 oct packet lower */
+ u32 rx_255_u; /* Rx 128 to 255 oct packet upper */
+ u32 rx_511_l; /* Rx 256 to 511 oct packet lower */
+ u32 rx_511_u; /* Rx 256 to 511 oct packet upper */
+ u32 rx_1023_l; /* Rx 512 to 1023 oct packet lower */
+ u32 rx_1023_u; /* Rx 512 to 1023 oct packet upper */
+ u32 rx_1518_l; /* Rx 1024 to 1518 oct packet lower */
+ u32 rx_1518_u; /* Rx 1024 to 1518 oct packet upper */
+ u32 rx_1519_l; /* Rx 1519 to max oct packet lower */
+ u32 rx_1519_u; /* Rx 1519 to max oct packet upper */
+ u32 rx_oversz_l; /* Rx oversized packet lower */
+ u32 rx_oversz_u; /* Rx oversized packet upper */
+ u32 rx_jabber_l; /* Rx Jabber packet lower */
+ u32 rx_jabber_u; /* Rx Jabber packet upper */
+ u32 rx_frag_l; /* Rx Fragment packet lower */
+ u32 rx_frag_u; /* Rx Fragment packet upper */
+ u32 rx_cnp_l; /* Rx control packet lower */
+ u32 rx_cnp_u; /* Rx control packet upper */
+ u32 rx_drntp_l; /* Rx dripped not truncated packet lower */
+ u32 rx_drntp_u; /* Rx dripped not truncated packet upper */
+ u32 res_1d0[0xc];
+
+ u32 tx_eoct_l; /* Tx ethernet octests lower */
+ u32 tx_eoct_u; /* Tx ethernet octests upper */
+ u32 tx_oct_l; /* Tx octests lower */
+ u32 tx_oct_u; /* Tx octests upper */
+ u32 res_210[0x2];
+ u32 tx_pause_frame_l; /* Tx valid pause frame lower */
+ u32 tx_pause_frame_u; /* Tx valid pause frame upper */
+ u32 tx_frame_l; /* Tx frame counter lower */
+ u32 tx_frame_u; /* Tx frame counter upper */
+ u32 tx_frame_crc_err_l; /* Tx frame check sequence error lower */
+ u32 tx_frame_crc_err_u; /* Tx frame check sequence error upper */
+ u32 tx_vlan_l; /* Tx VLAN frame lower */
+ u32 tx_vlan_u; /* Tx VLAN frame upper */
+ u32 tx_frame_err_l; /* Tx frame error lower */
+ u32 tx_frame_err_u; /* Tx frame error upper */
+ u32 tx_uni_l; /* Tx unicast frame lower */
+ u32 tx_uni_u; /* Tx unicast frame upper */
+ u32 tx_multi_l; /* Tx multicast frame lower */
+ u32 tx_multi_u; /* Tx multicast frame upper */
+ u32 tx_brd_l; /* Tx broadcast frame lower */
+ u32 tx_brd_u; /* Tx broadcast frame upper */
+ u32 res_258[0x2];
+ u32 tx_pkt_l; /* Tx packets lower */
+ u32 tx_pkt_u; /* Tx packets upper */
+ u32 tx_undsz_l; /* Tx undersized packet lower */
+ u32 tx_undsz_u; /* Tx undersized packet upper */
+ u32 tx_64_l; /* Tx 64 oct packet lower */
+ u32 tx_64_u; /* Tx 64 oct packet upper */
+ u32 tx_127_l; /* Tx 65 to 127 oct packet lower */
+ u32 tx_127_u; /* Tx 65 to 127 oct packet upper */
+ u32 tx_255_l; /* Tx 128 to 255 oct packet lower */
+ u32 tx_255_u; /* Tx 128 to 255 oct packet upper */
+ u32 tx_511_l; /* Tx 256 to 511 oct packet lower */
+ u32 tx_511_u; /* Tx 256 to 511 oct packet upper */
+ u32 tx_1023_l; /* Tx 512 to 1023 oct packet lower */
+ u32 tx_1023_u; /* Tx 512 to 1023 oct packet upper */
+ u32 tx_1518_l; /* Tx 1024 to 1518 oct packet lower */
+ u32 tx_1518_u; /* Tx 1024 to 1518 oct packet upper */
+ u32 tx_1519_l; /* Tx 1519 to max oct packet lower */
+ u32 tx_1519_u; /* Tx 1519 to max oct packet upper */
+ u32 res_2a8[0x6];
+ u32 tx_cnp_l; /* Tx control packet lower */
+ u32 tx_cnp_u; /* Tx control packet upper */
+ u32 res_2c8[0xe];
+
+ /* Line interface control register */
+ u32 if_mode; /* interface mode control */
+ u32 if_status; /* interface status */
+ u32 res_308[0xe];
+
+ /* HiGig/2 Register */
+ u32 hg_config; /* HiGig2 control and configuration */
+ u32 res_344[0x3];
+ u32 hg_pause_quanta; /* HiGig2 pause quanta */
+ u32 res_354[0x3];
+ u32 hg_pause_thresh; /* HiGig2 pause quanta threshold */
+ u32 res_364[0x3];
+ u32 hgrx_pause_status; /* HiGig2 rx pause quanta status */
+ u32 hg_fifos_status; /* HiGig2 fifos status */
+ u32 rhm; /* Rx HiGig2 message counter register */
+ u32 thm;/* Tx HiGig2 message counter register */
+ u32 res_380[0x320];
+};
+
+/* COMMAND_CONFIG - command and configuration register */
+#define MEMAC_CMD_CFG_RX_EN 0x00000002 /* MAC Rx path enable */
+#define MEMAC_CMD_CFG_TX_EN 0x00000001 /* MAC Tx path enable */
+#define MEMAC_CMD_CFG_RXTX_EN (MEMAC_CMD_CFG_RX_EN | MEMAC_CMD_CFG_TX_EN)
+
+/* HASHTABLE_CTRL - Hashtable control register */
+#define HASHTABLE_CTRL_MCAST_EN 0x00000200 /* enable mulitcast Rx hash */
+#define HASHTABLE_CTRL_ADDR_MASK 0x000001ff
+
+/* TX_IPG_LENGTH - Transmit inter-packet gap length register */
+#define TX_IPG_LENGTH_IPG_LEN_MASK 0x000003ff
+
+/* IMASK - interrupt mask register */
+#define IMASK_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event mask */
+#define IMASK_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion mask */
+#define IMASK_REM_FAULT 0x00004000 /* remote fault mask */
+#define IMASK_LOC_FAULT 0x00002000 /* local fault mask */
+#define IMASK_TX_ECC_ER 0x00001000 /* Tx frame ECC error mask */
+#define IMASK_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow mask */
+#define IMASK_TX_ER 0x00000200 /* Tx frame error mask */
+#define IMASK_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow mask */
+#define IMASK_RX_ECC_ER 0x00000080 /* Rx frame ECC error mask */
+#define IMASK_RX_JAB_FRM 0x00000040 /* Rx jabber frame mask */
+#define IMASK_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame mask */
+#define IMASK_RX_RUNT_FRM 0x00000010 /* Rx runt frame mask */
+#define IMASK_RX_FRAG_FRM 0x00000008 /* Rx fragment frame mask */
+#define IMASK_RX_LEN_ER 0x00000004 /* Rx payload length error mask */
+#define IMASK_RX_CRC_ER 0x00000002 /* Rx CRC error mask */
+#define IMASK_RX_ALIGN_ER 0x00000001 /* Rx alignment error mask */
+
+#define IMASK_MASK_ALL 0x00000000
+
+/* IEVENT - interrupt event register */
+#define IEVENT_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event */
+#define IEVENT_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion */
+#define IEVENT_REM_FAULT 0x00004000 /* remote fault */
+#define IEVENT_LOC_FAULT 0x00002000 /* local fault */
+#define IEVENT_TX_ECC_ER 0x00001000 /* Tx frame ECC error */
+#define IEVENT_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow */
+#define IEVENT_TX_ER 0x00000200 /* Tx frame error */
+#define IEVENT_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow */
+#define IEVENT_RX_ECC_ER 0x00000080 /* Rx frame ECC error */
+#define IEVENT_RX_JAB_FRM 0x00000040 /* Rx jabber frame */
+#define IEVENT_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame */
+#define IEVENT_RX_RUNT_FRM 0x00000010 /* Rx runt frame */
+#define IEVENT_RX_FRAG_FRM 0x00000008 /* Rx fragment frame */
+#define IEVENT_RX_LEN_ER 0x00000004 /* Rx payload length error */
+#define IEVENT_RX_CRC_ER 0x00000002 /* Rx CRC error */
+#define IEVENT_RX_ALIGN_ER 0x00000001 /* Rx alignment error */
+
+#define IEVENT_CLEAR_ALL 0xffffffff
+
+/* IF_MODE - Interface Mode Register */
+#define IF_MODE_EN_AUTO 0x00008000 /* 1 - Enable automatic speed selection */
+#define IF_MODE_XGMII 0x00000000 /* 00- XGMII(10) interface mode */
+#define IF_MODE_GMII 0x00000002 /* 10- GMII interface mode */
+#define IF_MODE_MASK 0x00000003 /* mask for mode interface mode */
+#define IF_MODE_RG 0x00000004 /* 1- RGMII */
+#define IF_MODE_RM 0x00000008 /* 1- RGMII */
+
+#define IF_DEFAULT (IF_GMII)
+
+/* Internal PHY Registers - SGMII */
+#define PHY_SGMII_CR_PHY_RESET 0x8000
+#define PHY_SGMII_CR_RESET_AN 0x0200
+#define PHY_SGMII_CR_DEF_VAL 0x1140
+#define PHY_SGMII_DEV_ABILITY_SGMII 0x4001
+#define PHY_SGMII_IF_MODE_AN 0x0002
+#define PHY_SGMII_IF_MODE_SGMII 0x0001
+
+struct memac_mdio_controller {
+ u32 res0[0xc];
+ u32 mdio_stat; /* MDIO configuration and status */
+ u32 mdio_ctl; /* MDIO control */
+ u32 mdio_data; /* MDIO data */
+ u32 mdio_addr; /* MDIO address */
+};
+
+#define MDIO_STAT_CLKDIV(x) (((x>>1) & 0xff) << 8)
+#define MDIO_STAT_BSY (1 << 0)
+#define MDIO_STAT_RD_ER (1 << 1)
+#define MDIO_STAT_PRE (1 << 5)
+#define MDIO_STAT_ENC (1 << 6)
+#define MDIO_STAT_HOLD_15_CLK (7 << 2)
+
+#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f)
+#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5)
+#define MDIO_CTL_PRE_DIS (1 << 10)
+#define MDIO_CTL_SCAN_EN (1 << 11)
+#define MDIO_CTL_POST_INC (1 << 14)
+#define MDIO_CTL_READ (1 << 15)
+
+#define MDIO_DATA(x) (x & 0xffff)
+#define MDIO_DATA_BSY (1 << 31)
+
+struct fsl_enet_mac;
+
+void init_memac(struct fsl_enet_mac *mac, void *base, void *phyregs,
+ int max_rx_len);
+
+#endif
FSL_HW_PORTAL_FMAN2,
#endif
#endif
-#ifdef CONFIG_SYS_DPAA_PME
FSL_HW_PORTAL_PME,
-#endif
#ifdef CONFIG_SYS_FSL_RAID_ENGINE
FSL_HW_PORTAL_RAID_ENGINE,
#endif
#ifdef CONFIG_SYS_DPAA_RMAN
FSL_HW_PORTAL_RMAN,
#endif
+#ifdef CONFIG_SYS_DPAA_DCE
+ FSL_HW_PORTAL_DCE,
+#endif
};
SGMII_FM1_DTSEC3,
SGMII_FM1_DTSEC4,
SGMII_FM1_DTSEC5,
+ SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC10,
SGMII_FM2_DTSEC1,
SGMII_FM2_DTSEC2,
SGMII_FM2_DTSEC3,
SGMII_FM2_DTSEC4,
SGMII_FM2_DTSEC5,
+ SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC9,
+ SGMII_FM2_DTSEC10,
SGMII_TSEC1,
SGMII_TSEC2,
SGMII_TSEC3,
XAUI_FM1,
XAUI_FM2,
AURORA,
+ CPRI1,
+ CPRI2,
+ CPRI3,
+ CPRI4,
+ CPRI5,
+ CPRI6,
+ CPRI7,
+ CPRI8,
+ XAUI_FM1_MAC9,
+ XAUI_FM1_MAC10,
+ XAUI_FM2_MAC9,
+ XAUI_FM2_MAC10,
+ HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC10,
+ HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC10,
+ QSGMII_FM1_A, /* A indicates MACs 1-4 */
+ QSGMII_FM1_B, /* B indicates MACs 5,6,9,10 */
+ QSGMII_FM2_A,
+ QSGMII_FM2_B,
+ XFI_FM1_MAC9,
+ XFI_FM1_MAC10,
+ XFI_FM2_MAC9,
+ XFI_FM2_MAC10,
+ INTERLAKEN,
+};
+
+enum srds {
+ FSL_SRDS_1 = 0,
+ FSL_SRDS_2 = 1,
+ FSL_SRDS_3 = 2,
+ FSL_SRDS_4 = 3,
};
int is_serdes_configured(enum srds_prtcl device);
void fsl_serdes_init(void);
#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
+#else
int serdes_get_first_lane(enum srds_prtcl device);
+#endif
#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
void serdes_reset_rx(enum srds_prtcl device);
#endif
typedef struct global_data {
bd_t *bd;
unsigned long flags;
- unsigned long baudrate;
+ unsigned int baudrate;
unsigned long cpu_clk; /* CPU clock in Hz! */
unsigned long bus_clk;
#if defined(CONFIG_8xx)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
+#elif defined(CONFIG_MPC8309)
+ u32 usbdr_clk;
#endif
#if defined (CONFIG_MPC834x)
u32 usbmph_clk;
u32 obir; /* Output Buffer Impedance Register */
u8 res8[0xC];
u32 pecr1; /* PCI Express control register 1 */
-#ifdef CONFIG_MPC8308
- u32 sdhccr; /* eSDHC Control Registers for MPC8308 */
+#if defined(CONFIG_MPC830x)
+ u32 sdhccr; /* eSDHC Control Registers for MPC830x */
#else
u32 pecr2; /* PCI Express control register 2 */
#endif
+#if defined(CONFIG_MPC8309)
+ u32 can_dbg_ctrl;
+ u32 res9a;
+ u32 gpr1;
+ u8 res9b[0xAC];
+#else
u8 res9[0xB8];
+#endif
} sysconf83xx_t;
/*
* On Chip ROM
*/
typedef struct rom83xx {
+#if defined(CONFIG_MPC8309)
+ u8 mem[0x8000];
+#else
u8 mem[0x10000];
+#endif
} rom83xx_t;
/*
u8 res8[0xC0000];
u8 qe[0x100000]; /* QE block */
} immap_t;
+#elif defined(CONFIG_MPC8309)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ gpio83xx_t gpio[2]; /* General purpose I/O module */
+ u8 res0[0x500]; /* res0 1.25 KBytes added for 8309 */
+ qepi83xx_t qepi; /* QE Ports Interrupts Registers */
+ qepio83xx_t qepio; /* QE Parallel I/O ports */
+ u8 res1[0x800];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res2[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res3[0x200];
+ duart83xx_t duart1[2]; /* DUART */
+ u8 res4[0x500];
+ fsl_lbc_t im_lbc; /* Local Bus Controller Regs */
+ u8 res5[0x1000];
+ u8 spi[0x100];
+ u8 res6[0xf00];
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[1]; /* PCI Configuration Registers */
+ u8 res7[0x80];
+ ios83xx_t ios; /* Sequencer (IOS) */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Control & Status Registers */
+ u8 res8[0x13A00];
+ u8 can1[0x1000]; /* Flexcan 1 */
+ u8 can2[0x1000]; /* Flexcan 2 */
+ u8 res9[0x5000];
+ usb83xx_t usb;
+ u8 res10[0x5000];
+ u8 can3[0x1000]; /* Flexcan 3 */
+ u8 can4[0x1000]; /* Flexcan 4 */
+ u8 res11[0x1000];
+ u8 dma1[0x2000]; /* DMA */
+ sdhc83xx_t sdhc; /* SDHC Controller */
+ u8 res12[0xC1000];
+ rom83xx_t rom; /* On Chip ROM */
+ u8 res13[0x8000];
+ u8 qe[0x100000]; /* QE block */
+ u8 res14[0xE00000];/* Added for 8309 */
+} immap_t;
#endif
#define CONFIG_SYS_MPC83xx_DDR_OFFSET (0x2000)
u32 cfg_addr; /* PCIX Configuration Addr */
u32 cfg_data; /* PCIX Configuration Data */
u32 int_ack; /* PCIX IRQ Acknowledge */
- u8 res1[3060];
+ u8 res000c[52];
+ u32 liodn_base; /* PCIX LIODN base register */
+ u8 res0044[3004];
u32 potar0; /* PCIX Outbound Transaction Addr 0 */
u32 potear0; /* PCIX Outbound Translation Extended Addr 0 */
u32 powbar0; /* PCIX Outbound Window Base Addr 0 */
u32 alt_pmuxcr; /* Alt function signal multiplex control */
u8 res6[12];
u32 devdisr; /* Device disable control */
+ u32 devdisr2; /* Device disable control 2 */
+ u32 devdisr3; /* Device disable control 3 */
+ u32 devdisr4; /* Device disable control 4 */
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ u32 devdisr5; /* Device disable control 5 */
+#define FSL_CORENET_DEVDISR_PBL 0x80000000
+#define FSL_CORENET_DEVDISR_PMAN 0x40000000
+#define FSL_CORENET_DEVDISR_ESDHC 0x20000000
+#define FSL_CORENET_DEVDISR_DMA1 0x00800000
+#define FSL_CORENET_DEVDISR_DMA2 0x00400000
+#define FSL_CORENET_DEVDISR_USB1 0x00080000
+#define FSL_CORENET_DEVDISR_USB2 0x00040000
+#define FSL_CORENET_DEVDISR_SATA1 0x00008000
+#define FSL_CORENET_DEVDISR_SATA2 0x00004000
+#define FSL_CORENET_DEVDISR_PME 0x00000800
+#define FSL_CORENET_DEVDISR_SEC 0x00000200
+#define FSL_CORENET_DEVDISR_RMU 0x00000080
+#define FSL_CORENET_DEVDISR_DCE 0x00000040
+#define FSL_CORENET_DEVDISR2_DTSEC1_1 0x80000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_2 0x40000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_3 0x20000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_4 0x10000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_5 0x08000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_6 0x04000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_9 0x00800000
+#define FSL_CORENET_DEVDISR2_DTSEC1_10 0x00400000
+#define FSL_CORENET_DEVDISR2_10GEC1_1 0x00800000
+#define FSL_CORENET_DEVDISR2_10GEC1_2 0x00400000
+#define FSL_CORENET_DEVDISR2_DTSEC2_1 0x00080000
+#define FSL_CORENET_DEVDISR2_DTSEC2_2 0x00040000
+#define FSL_CORENET_DEVDISR2_DTSEC2_3 0x00020000
+#define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00010000
+#define FSL_CORENET_DEVDISR2_DTSEC2_5 0x00008000
+#define FSL_CORENET_DEVDISR2_DTSEC2_6 0x00004000
+#define FSL_CORENET_DEVDISR2_DTSEC2_9 0x00000800
+#define FSL_CORENET_DEVDISR2_DTSEC2_10 0x00000400
+#define FSL_CORENET_DEVDISR2_10GEC2_1 0x00000800
+#define FSL_CORENET_DEVDISR2_10GEC2_2 0x00000400
+#define FSL_CORENET_DEVDISR2_FM1 0x00000080
+#define FSL_CORENET_DEVDISR2_FM2 0x00000040
+#define FSL_CORENET_DEVDISR2_CPRI 0x00000008
+#define FSL_CORENET_DEVDISR3_PCIE1 0x80000000
+#define FSL_CORENET_DEVDISR3_PCIE2 0x40000000
+#define FSL_CORENET_DEVDISR3_PCIE3 0x20000000
+#define FSL_CORENET_DEVDISR3_PCIE4 0x10000000
+#define FSL_CORENET_DEVDISR3_SRIO1 0x08000000
+#define FSL_CORENET_DEVDISR3_SRIO2 0x04000000
+#define FSL_CORENET_DEVDISR3_QMAN 0x00080000
+#define FSL_CORENET_DEVDISR3_BMAN 0x00040000
+#define FSL_CORENET_DEVDISR3_LA1 0x00008000
+#define FSL_CORENET_DEVDISR3_MAPLE1 0x00000800
+#define FSL_CORENET_DEVDISR3_MAPLE2 0x00000400
+#define FSL_CORENET_DEVDISR3_MAPLE3 0x00000200
+#define FSL_CORENET_DEVDISR4_I2C1 0x80000000
+#define FSL_CORENET_DEVDISR4_I2C2 0x40000000
+#define FSL_CORENET_DEVDISR4_DUART1 0x20000000
+#define FSL_CORENET_DEVDISR4_DUART2 0x10000000
+#define FSL_CORENET_DEVDISR4_ESPI 0x08000000
+#define FSL_CORENET_DEVDISR5_DDR1 0x80000000
+#define FSL_CORENET_DEVDISR5_DDR2 0x40000000
+#define FSL_CORENET_DEVDISR5_DDR3 0x20000000
+#define FSL_CORENET_DEVDISR5_CPC1 0x08000000
+#define FSL_CORENET_DEVDISR5_CPC2 0x04000000
+#define FSL_CORENET_DEVDISR5_CPC3 0x02000000
+#define FSL_CORENET_DEVDISR5_IFC 0x00800000
+#define FSL_CORENET_DEVDISR5_GPIO 0x00400000
+#define FSL_CORENET_DEVDISR5_DBG 0x00200000
+#define FSL_CORENET_DEVDISR5_NAL 0x00100000
+#define FSL_CORENET_DEVDISR5_TIMERS 0x00020000
+#define FSL_CORENET_NUM_DEVDISR 5
+#else
#define FSL_CORENET_DEVDISR_PCIE1 0x80000000
#define FSL_CORENET_DEVDISR_PCIE2 0x40000000
#define FSL_CORENET_DEVDISR_PCIE3 0x20000000
#define FSL_CORENET_DEVDISR_I2C2 0x00000010
#define FSL_CORENET_DEVDISR_DUART1 0x00000002
#define FSL_CORENET_DEVDISR_DUART2 0x00000001
- u32 devdisr2; /* Device disable control 2 */
#define FSL_CORENET_DEVDISR2_PME 0x80000000
#define FSL_CORENET_DEVDISR2_SEC 0x40000000
#define FSL_CORENET_DEVDISR2_QMBM 0x08000000
#define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00001000
#define FSL_CORENET_DEVDISR2_DTSEC2_5 0x00000800
#define FSL_CORENET_NUM_DEVDISR 2
- u8 res7[8];
u32 powmgtcsr; /* Power management status & control */
+#endif
u8 res8[12];
u32 coredisru; /* uppper portion for support of 64 cores */
u32 coredisrl; /* lower portion for support of 64 cores */
u32 brrl; /* Boot release */
u8 res17[24];
u32 rcwsr[16]; /* Reset control word status */
+
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 16
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x3f
+#if defined(CONFIG_PPC_T4240)
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfc000000
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 26
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 17
+#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL 0x0000f800
+#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT 11
+#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL 0x000000f8
+#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT 3
+#elif defined(CONFIG_PPC_B4860)
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfe000000
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 25
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 16
+#endif
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1 0x00800000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2 0x00400000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL1 0x00200000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL2 0x00100000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL1 0x00080000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL2 0x00040000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL1 0x00020000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL2 0x00010000
+
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 17
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x1f
#define FSL_CORENET_RCWSR4_SRDS_PRTCL 0xfc000000
#define FSL_CORENET_RCWSR5_DDR_SYNC 0x00000080
#define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 7
#define FSL_CORENET_RCWSR5_SRDS_EN 0x00002000
+#define FSL_CORENET_RCWSR5_SRDS2_EN 0x00001000
#define FSL_CORENET_RCWSR6_BOOT_LOC 0x0f800000
#define FSL_CORENET_RCWSRn_SRDS_LPD_B2 0x3c000000 /* bits 162..165 */
#define FSL_CORENET_RCWSRn_SRDS_LPD_B3 0x003c0000 /* bits 170..173 */
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
#define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT 0x00400000
#define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000
#define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000
#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_RGMII 0x00000000
#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_MII 0x00100000
#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_NONE 0x00180000
+#endif
+#if defined(CONFIG_PPC_P5040)
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_MII 0x00800000
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_NONE 0x00c00000
+#define FSL_CORENET_RCWSR11_EC2 0x00180000 /* bits 363..364 */
+#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII 0x00100000
+#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_NONE 0x00180000
+#endif
+#if defined(CONFIG_PPC_T4240)
+#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */
+#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000
+#define FSL_CORENET_RCWSR13_EC2 0x18000000 /* bits 419..420 */
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC6_RGMII 0x08000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000
#endif
u8 res18[192];
u32 scratchrw[4]; /* Scratch Read/Write */
#define rmuliodnr rio1maintliodnr
typedef struct ccsr_clk {
- u32 clkc0csr; /* Core 0 Clock control/status */
+ u32 clkc0csr; /* 0x000 Core 0 Clock control/status */
u8 res1[0x1c];
- u32 clkc1csr; /* Core 1 Clock control/status */
+ u32 clkc1csr; /* 0x020 Core 1 Clock control/status */
u8 res2[0x1c];
- u32 clkc2csr; /* Core 2 Clock control/status */
+ u32 clkc2csr; /* 0x040 Core 2 Clock control/status */
u8 res3[0x1c];
- u32 clkc3csr; /* Core 3 Clock control/status */
+ u32 clkc3csr; /* 0x060 Core 3 Clock control/status */
u8 res4[0x1c];
- u32 clkc4csr; /* Core 4 Clock control/status */
+ u32 clkc4csr; /* 0x080 Core 4 Clock control/status */
u8 res5[0x1c];
- u32 clkc5csr; /* Core 5 Clock control/status */
+ u32 clkc5csr; /* 0x0a0 Core 5 Clock control/status */
u8 res6[0x1c];
- u32 clkc6csr; /* Core 6 Clock control/status */
+ u32 clkc6csr; /* 0x0c0 Core 6 Clock control/status */
u8 res7[0x1c];
- u32 clkc7csr; /* Core 7 Clock control/status */
+ u32 clkc7csr; /* 0x0e0 Core 7 Clock control/status */
u8 res8[0x71c];
- u32 pllc1gsr; /* Cluster PLL 1 General Status */
+ u32 pllc1gsr; /* 0x800 Cluster PLL 1 General Status */
u8 res10[0x1c];
- u32 pllc2gsr; /* Cluster PLL 2 General Status */
+ u32 pllc2gsr; /* 0x820 Cluster PLL 2 General Status */
u8 res11[0x1c];
- u32 pllc3gsr; /* Cluster PLL 3 General Status */
+ u32 pllc3gsr; /* 0x840 Cluster PLL 3 General Status */
u8 res12[0x1c];
- u32 pllc4gsr; /* Cluster PLL 4 General Status */
- u8 res13[0x39c];
- u32 pllpgsr; /* Platform PLL General Status */
+ u32 pllc4gsr; /* 0x860 Cluster PLL 4 General Status */
+ u8 res13[0x1c];
+ u32 pllc5gsr; /* 0x880 Cluster PLL 5 General Status */
u8 res14[0x1c];
- u32 plldgsr; /* DDR PLL General Status */
- u8 res15[0x3dc];
+ u32 pllc6gsr; /* 0x8a0 Cluster PLL 6 General Status */
+ u8 res15[0x35c];
+ u32 pllpgsr; /* 0xc00 Platform PLL General Status */
+ u8 res16[0x1c];
+ u32 plldgsr; /* 0xc20 DDR PLL General Status */
+ u8 res17[0x3dc];
} ccsr_clk_t;
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
#define SDHCDCR_CD_INV 0x80000000 /* invert SDHC card detect */
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#define MAX_SERDES 4
+#define SRDS_MAX_LANES 8
+#define SRDS_MAX_BANK 2
+typedef struct serdes_corenet {
+ struct {
+ u32 rstctl; /* Reset Control Register */
+#define SRDS_RSTCTL_RST 0x80000000
+#define SRDS_RSTCTL_RSTDONE 0x40000000
+#define SRDS_RSTCTL_RSTERR 0x20000000
+#define SRDS_RSTCTL_SWRST 0x10000000
+#define SRDS_RSTCTL_SDPD 0x00000020
+ u32 pllcr0; /* PLL Control Register 0 */
+#define SRDS_PLLCR0_POFF 0x80000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000
+#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000
+#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000
+#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000
+#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000
+#define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000
+#define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000
+#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000
+#define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000
+#define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000
+#define SRDS_PLLCR0_FRATE_SEL_4 0x00070000
+#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000
+#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000
+ u32 pllcr1; /* PLL Control Register 1 */
+#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
+ u32 res_0c; /* 0x00c */
+ u32 pllcr3;
+ u32 pllcr4;
+ u8 res_18[0x20-0x18];
+ } bank[2];
+ u8 res_40[0x90-0x40];
+ u32 srdstcalcr; /* 0x90 TX Calibration Control */
+ u8 res_94[0xa0-0x94];
+ u32 srdsrcalcr; /* 0xa0 RX Calibration Control */
+ u8 res_a4[0xb0-0xa4];
+ u32 srdsgr0; /* 0xb0 General Register 0 */
+ u8 res_b4[0xe0-0xb4];
+ u32 srdspccr0; /* 0xe0 Protocol Converter Config 0 */
+ u32 srdspccr1; /* 0xe4 Protocol Converter Config 1 */
+ u32 srdspccr2; /* 0xe8 Protocol Converter Config 2 */
+ u32 srdspccr3; /* 0xec Protocol Converter Config 3 */
+ u32 srdspccr4; /* 0xf0 Protocol Converter Config 4 */
+ u8 res_f4[0x100-0xf4];
+ struct {
+ u32 lnpssr; /* 0x100, 0x120, ..., 0x1e0 */
+ u8 res_104[0x120-0x104];
+ } srdslnpssr[8];
+ u8 res_200[0x800-0x200];
+ struct {
+ u32 gcr0; /* 0x800 General Control Register 0 */
+ u32 gcr1; /* 0x804 General Control Register 1 */
+ u32 gcr2; /* 0x808 General Control Register 2 */
+ u32 res_80c;
+ u32 recr0; /* 0x810 Receive Equalization Control */
+ u32 res_814;
+ u32 tecr0; /* 0x818 Transmit Equalization Control */
+ u32 res_81c;
+ u32 ttlcr0; /* 0x820 Transition Tracking Loop Ctrl 0 */
+ u8 res_824[0x840-0x824];
+ } lane[8]; /* Lane A, B, C, D, E, F, G, H */
+ u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */
+} serdes_corenet_t;
+
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+#define SRDS_MAX_LANES 18
+#define SRDS_MAX_BANK 3
typedef struct serdes_corenet {
struct {
u32 rstctl; /* Reset Control Register */
#define SRDS_RSTCTL_RSTERR 0x20000000
#define SRDS_RSTCTL_SDPD 0x00000020
u32 pllcr0; /* PLL Control Register 0 */
-#define SRDS_PLLCR0_RFCK_SEL_MASK 0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000
+#define SRDS_PLLCR0_PVCOCNT_EN 0x02000000
#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000
#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000
#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000
#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000
#define SRDS_PLLCR0_FRATE_SEL_MASK 0x00030000
#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000
#define SRDS_PLLCR0_FRATE_SEL_6_25 0x00010000
u32 gcr0; /* General Control Register 0 */
#define SRDS_GCR0_RRST 0x00400000
#define SRDS_GCR0_1STLANE 0x00010000
+#define SRDS_GCR0_UOTHL 0x00100000
u32 gcr1; /* General Control Register 1 */
#define SRDS_GCR1_REIDL_CTL_MASK 0x001f0000
#define SRDS_GCR1_REIDL_CTL_PCIE 0x00100000
} lane[24];
u32 res6[384];
} serdes_corenet_t;
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
enum {
FSL_SRDS_B1_LANE_A = 0,
struct {
u32 ms; /* DECO LIODN Register, MS */
u32 ls; /* DECO LIODN Register, LS */
- } decoliodnr[5];
- u8 res4[0x58];
+ } decoliodnr[8];
+ u8 res4[0x40];
u32 dar; /* DECO Avail Register */
u32 drr; /* DECO Reset Register */
u8 res5[0xe78];
#endif
typedef struct ccsr_qman {
+#ifdef CONFIG_SYS_FSL_QMAN_V3
+ u8 res0[0x200];
+#else
struct {
u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */
u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */
u32 res;
u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg */
} qcsp[32];
-
+#endif
/* Not actually reserved, but irrelevant to u-boot */
u8 res[0xbf8 - 0x200];
u32 ip_rev_1;
u32 ci_rlm_cfg; /* Initiator Read Latency Monitor Cfg */
u32 ci_rlm_avg; /* Initiator Read Latency Monitor Avg */
u8 res7[0x2e8];
+#ifdef CONFIG_SYS_FSL_QMAN_V3
+ struct {
+ u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */
+ u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */
+ u32 res;
+ u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg*/
+ } qcsp[50];
+#endif
} ccsr_qman_t;
typedef struct ccsr_bman {
};
#endif
+#ifdef CONFIG_SYS_PMAN
+struct ccsr_pman {
+ u8 res_00[0x40];
+ u32 poes1; /* PMAN Operation Error Status Register 1 */
+ u32 poes2; /* PMAN Operation Error Status Register 2 */
+ u32 poeah; /* PMAN Operation Error Address High */
+ u32 poeal; /* PMAN Operation Error Address Low */
+ u8 res_50[0x50];
+ u32 pr1; /* PMAN Revision Register 1 */
+ u32 pr2; /* PMAN Revision Register 2 */
+ u8 res_a8[0x8];
+ u32 pcap; /* PMAN Capabilities Register */
+ u8 res_b4[0xc];
+ u32 pc1; /* PMAN Control Register 1 */
+ u32 pc2; /* PMAN Control Register 2 */
+ u32 pc3; /* PMAN Control Register 3 */
+ u32 pc4; /* PMAN Control Register 4 */
+ u32 pc5; /* PMAN Control Register 5 */
+ u32 pc6; /* PMAN Control Register 6 */
+ u8 res_d8[0x8];
+ u32 ppa1; /* PMAN Prefetch Attributes Register 1 */
+ u32 ppa2; /* PMAN Prefetch Attributes Register 2 */
+ u8 res_e8[0x8];
+ u32 pics; /* PMAN Interrupt Control and Status */
+ u8 res_f4[0xf0c];
+};
+#endif
+
#ifdef CONFIG_FSL_CORENET
#define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000
+#ifdef CONFIG_SYS_PMAN
+#define CONFIG_SYS_FSL_CORENET_PMAN1_OFFSET 0x4000
+#define CONFIG_SYS_FSL_CORENET_PMAN2_OFFSET 0x5000
+#define CONFIG_SYS_FSL_CORENET_PMAN3_OFFSET 0x6000
+#endif
#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000
#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x9000
#define CONFIG_SYS_MPC85xx_DDR3_OFFSET 0xA000
#define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000
#define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000
#define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000
+#define CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET 0xEB000
#define CONFIG_SYS_FSL_CPC_OFFSET 0x10000
#define CONFIG_SYS_MPC85xx_DMA1_OFFSET 0x100000
#define CONFIG_SYS_MPC85xx_DMA2_OFFSET 0x101000
#define CONFIG_SYS_MPC85xx_IFC_OFFSET 0x124000
#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000
#define CONFIG_SYS_FSL_CORENET_RMAN_OFFSET 0x1e0000
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x240000
+#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x250000
+#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x260000
+#define CONFIG_SYS_MPC85xx_PCIE4_OFFSET 0x270000
+#else
#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x200000
#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x201000
#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x202000
#define CONFIG_SYS_MPC85xx_PCIE4_OFFSET 0x203000
+#endif
#define CONFIG_SYS_MPC85xx_USB1_OFFSET 0x210000
#define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x211000
#define CONFIG_SYS_MPC85xx_USB_OFFSET CONFIG_SYS_MPC85xx_USB1_OFFSET
#define CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET 0x48a000
#define CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET 0x48b000
#define CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET 0x48c000
+#define CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET 0x48d000
#define CONFIG_SYS_FSL_FM1_RX0_10G_OFFSET 0x490000
+#define CONFIG_SYS_FSL_FM1_RX1_10G_OFFSET 0x491000
#define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET 0x4e0000
#define CONFIG_SYS_FSL_FM2_OFFSET 0x500000
#define CONFIG_SYS_FSL_FM2_RX0_1G_OFFSET 0x588000
#define CONFIG_SYS_FSL_FM2_RX2_1G_OFFSET 0x58a000
#define CONFIG_SYS_FSL_FM2_RX3_1G_OFFSET 0x58b000
#define CONFIG_SYS_FSL_FM2_RX4_1G_OFFSET 0x58c000
+#define CONFIG_SYS_FSL_FM2_RX5_1G_OFFSET 0x58d000
#define CONFIG_SYS_FSL_FM2_RX0_10G_OFFSET 0x590000
+#define CONFIG_SYS_FSL_FM2_RX1_10G_OFFSET 0x591000
+#define CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET 0xC20000
#else
#define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000
#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
#define CONFIG_SYS_FSL_CORENET_SERDES_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_SERDES2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET)
#define CONFIG_SYS_MPC85xx_USB_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
#define CONFIG_SYS_MPC85xx_USB1_PHY_ADDR \
#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+struct ccsr_cluster_l2 {
+ u32 l2csr0; /* 0x000 L2 cache control and status register 0 */
+ u32 l2csr1; /* 0x004 L2 cache control and status register 1 */
+ u32 l2cfg0; /* 0x008 L2 cache configuration register 0 */
+ u8 res_0c[500];/* 0x00c - 0x1ff */
+ u32 l2pir0; /* 0x200 L2 cache partitioning ID register 0 */
+ u8 res_204[4];
+ u32 l2par0; /* 0x208 L2 cache partitioning allocation register 0 */
+ u32 l2pwr0; /* 0x20c L2 cache partitioning way register 0 */
+ u32 l2pir1; /* 0x210 L2 cache partitioning ID register 1 */
+ u8 res_214[4];
+ u32 l2par1; /* 0x218 L2 cache partitioning allocation register 1 */
+ u32 l2pwr1; /* 0x21c L2 cache partitioning way register 1 */
+ u32 u2pir2; /* 0x220 L2 cache partitioning ID register 2 */
+ u8 res_224[4];
+ u32 l2par2; /* 0x228 L2 cache partitioning allocation register 2 */
+ u32 l2pwr2; /* 0x22c L2 cache partitioning way register 2 */
+ u32 l2pir3; /* 0x230 L2 cache partitioning ID register 3 */
+ u8 res_234[4];
+ u32 l2par3; /* 0x238 L2 cache partitining allocation register 3 */
+ u32 l2pwr3; /* 0x23c L2 cache partitining way register 3 */
+ u32 l2pir4; /* 0x240 L2 cache partitioning ID register 3 */
+ u8 res244[4];
+ u32 l2par4; /* 0x248 L2 cache partitioning allocation register 3 */
+ u32 l2pwr4; /* 0x24c L2 cache partitioning way register 3 */
+ u32 l2pir5; /* 0x250 L2 cache partitioning ID register 3 */
+ u8 res_254[4];
+ u32 l2par5; /* 0x258 L2 cache partitioning allocation register 3 */
+ u32 l2pwr5; /* 0x25c L2 cache partitioning way register 3 */
+ u32 l2pir6; /* 0x260 L2 cache partitioning ID register 3 */
+ u8 res_264[4];
+ u32 l2par6; /* 0x268 L2 cache partitioning allocation register 3 */
+ u32 l2pwr6; /* 0x26c L2 cache partitioning way register 3 */
+ u32 l2pir7; /* 0x270 L2 cache partitioning ID register 3 */
+ u8 res274[4];
+ u32 l2par7; /* 0x278 L2 cache partitioning allocation register 3 */
+ u32 l2pwr7; /* 0x27c L2 cache partitioning way register 3 */
+ u8 res_280[0xb80]; /* 0x280 - 0xdff */
+ u32 l2errinjhi; /* 0xe00 L2 cache error injection mask high */
+ u32 l2errinjlo; /* 0xe04 L2 cache error injection mask low */
+ u32 l2errinjctl;/* 0xe08 L2 cache error injection control */
+ u8 res_e0c[20]; /* 0xe0c - 0x01f */
+ u32 l2captdatahi; /* 0xe20 L2 cache error capture data high */
+ u32 l2captdatalo; /* 0xe24 L2 cache error capture data low */
+ u32 l2captecc; /* 0xe28 L2 cache error capture ECC syndrome */
+ u8 res_e2c[20]; /* 0xe2c - 0xe3f */
+ u32 l2errdet; /* 0xe40 L2 cache error detect */
+ u32 l2errdis; /* 0xe44 L2 cache error disable */
+ u32 l2errinten; /* 0xe48 L2 cache error interrupt enable */
+ u32 l2errattr; /* 0xe4c L2 cache error attribute */
+ u32 l2erreaddr; /* 0xe50 L2 cache error extended address */
+ u32 l2erraddr; /* 0xe54 L2 cache error address */
+ u32 l2errctl; /* 0xe58 L2 cache error control */
+};
+#define CONFIG_SYS_FSL_CLUSTER_1_L2 \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET)
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
#endif /*__IMMAP_85xx__*/
#define QE_MURAM_SIZE 0xc000UL
#define MAX_QE_RISC 2
#define QE_NUM_OF_SNUM 28
-#elif defined(CONFIG_MPC832x)
+#elif defined(CONFIG_MPC832x) || defined(CONFIG_MPC8309)
#define QE_MURAM_SIZE 0x4000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
/*
* Non ordered and non-swapping "raw" accessors
*/
-#define __iomem
#define PCI_FIX_ADDR(addr) (addr)
static inline unsigned char __raw_readb(const volatile void __iomem *addr)
void setup_mp(void);
void cpu_mp_lmb_reserve(struct lmb *lmb);
-u32 determine_mp_bootpg(void);
+u32 determine_mp_bootpg(unsigned int *pagesize);
int is_core_disabled(int nr);
#ifdef CONFIG_E6500
static inline int gpio_direction_output(unsigned gpio, int value)
{
- mpc85xx_gpio_set_low(1U << gpio);
+ if (value)
+ mpc85xx_gpio_set_high(1U << gpio);
+ else
+ mpc85xx_gpio_set_low(1U << gpio);
return 0;
}
/*
* Prototypes
*/
-inline void ppc4xx_ibm_ddr2_register_dump(void);
+void ppc4xx_ibm_ddr2_register_dump(void);
u32 mfdcr_any(u32);
void mtdcr_any(u32, u32);
u32 ddr_wrdtr(u32);
#define SVR_P4080 0x820000
#define SVR_P5010 0x822100
#define SVR_P5020 0x822000
+#define SVR_P5021 0X820500
+#define SVR_P5040 0x820400
+#define SVR_T4240 0x824000
+#define SVR_T4120 0x824001
+#define SVR_B4860 0X868000
+#define SVR_G4860 0x868001
+#define SVR_G4060 0x868003
+#define SVR_B4440 0x868100
+#define SVR_G4440 0x868101
+#define SVR_B4420 0x868102
+#define SVR_B4220 0x868103
#define SVR_8610 0x80A000
#define SVR_8641 0x809000
unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
#endif
- unsigned long bi_baudrate; /* Console Baudrate */
+ unsigned int bi_baudrate; /* Console Baudrate */
#if defined(CONFIG_405) || \
defined(CONFIG_405GP) || \
defined(CONFIG_405CR) || \
COBJS-y += extable.o
COBJS-y += interrupts.o
COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
+COBJS-${CONFIG_CMD_IDE} += ide.o
COBJS-y += time.o
# Workaround for local bus unaligned access problems
/***********************************************************************/
-void __board_add_ram_info(int use_default)
+static void __board_add_ram_info(int use_default)
{
/* please define platform specific board_add_ram_info() */
}
void board_add_ram_info(int)
__attribute__ ((weak, alias("__board_add_ram_info")));
-int __board_flash_wp_on(void)
+static int __board_flash_wp_on(void)
{
/*
* Most flashes can't be detected when write protection is enabled,
int board_flash_wp_on(void)
__attribute__ ((weak, alias("__board_flash_wp_on")));
-void __cpu_secondary_init_r(void)
+static void __cpu_secondary_init_r(void)
{
}
* Initialization sequence
*/
-init_fnc_t *init_sequence[] = {
+static init_fnc_t *init_sequence[] = {
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
probecpu,
#endif
#endif
}
-int __fixup_cpu(void)
+static int __fixup_cpu(void)
{
return 0;
}
#ifdef CONFIG_POST
post_bootmode_init();
- post_run(NULL, POST_ROM | post_bootmode_get(0));
+ post_run(NULL, POST_ROM | post_bootmode_get(NULL));
#endif
WATCHDOG_RESET();
* We need to make sure the location we intend to put secondary core
* boot code is reserved and not used by any part of u-boot
*/
- if (addr > determine_mp_bootpg()) {
- addr = determine_mp_bootpg();
+ if (addr > determine_mp_bootpg(NULL)) {
+ addr = determine_mp_bootpg(NULL);
debug("Reserving MP boot page to %08lx\n", addr);
}
#endif
return 0;
}
-__attribute__((noinline))
+noinline
int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images)
{
int ret;
return 0;
}
-int ex_tab_message = 1;
-
unsigned long
search_exception_table(unsigned long addr)
{
ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr);
/* if the serial port does not hang in exception, printf can be used */
#if !defined(CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION)
- if (ex_tab_message)
- debug("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret);
+ debug("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret);
#endif
if (ret) return ret;
--- /dev/null
+/*
+ * (C) Copyright 2000-2011
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* Code taken from cmd_ide.c */
+#include <common.h>
+#include <ata.h>
+#include "ide.h"
+
+#ifdef CONFIG_IDE_8xx_DIRECT
+#include <mpc8xx.h>
+#include <pcmcia.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Timings for IDE Interface
+ *
+ * SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk
+ * 70 165 30 PIO-Mode 0, [ns]
+ * 4 9 2 [Cycles]
+ * 50 125 20 PIO-Mode 1, [ns]
+ * 3 7 2 [Cycles]
+ * 30 100 15 PIO-Mode 2, [ns]
+ * 2 6 1 [Cycles]
+ * 30 80 10 PIO-Mode 3, [ns]
+ * 2 5 1 [Cycles]
+ * 25 70 10 PIO-Mode 4, [ns]
+ * 2 4 1 [Cycles]
+ */
+
+static const pio_config_t pio_config_ns[IDE_MAX_PIO_MODE+1] = {
+ /* Setup Length Hold */
+ { 70, 165, 30 }, /* PIO-Mode 0, [ns] */
+ { 50, 125, 20 }, /* PIO-Mode 1, [ns] */
+ { 30, 101, 15 }, /* PIO-Mode 2, [ns] */
+ { 30, 80, 10 }, /* PIO-Mode 3, [ns] */
+ { 25, 70, 10 }, /* PIO-Mode 4, [ns] */
+};
+
+static pio_config_t pio_config_clk[IDE_MAX_PIO_MODE+1];
+
+#ifndef CONFIG_SYS_PIO_MODE
+#define CONFIG_SYS_PIO_MODE 0 /* use a relaxed default */
+#endif
+static int pio_mode = CONFIG_SYS_PIO_MODE;
+
+/* Make clock cycles and always round up */
+
+#define PCMCIA_MK_CLKS(t, T) (((t) * (T) + 999U) / 1000U)
+
+static void set_pcmcia_timing(int pmode)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
+ ulong timings;
+
+ debug("Set timing for PIO Mode %d\n", pmode);
+
+ timings = PCMCIA_SHT(pio_config_clk[pmode].t_hold)
+ | PCMCIA_SST(pio_config_clk[pmode].t_setup)
+ | PCMCIA_SL(pio_config_clk[pmode].t_length);
+
+ /*
+ * IDE 0
+ */
+ pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_PBR0;
+#if (CONFIG_SYS_PCMCIA_POR0 != 0)
+ pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0 | timings;
+#else
+ pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0;
+#endif
+ debug("PBR0: %08x POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0);
+
+ pcmp->pcmc_pbr1 = CONFIG_SYS_PCMCIA_PBR1;
+#if (CONFIG_SYS_PCMCIA_POR1 != 0)
+ pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1 | timings;
+#else
+ pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1;
+#endif
+ debug("PBR1: %08x POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1);
+
+ pcmp->pcmc_pbr2 = CONFIG_SYS_PCMCIA_PBR2;
+#if (CONFIG_SYS_PCMCIA_POR2 != 0)
+ pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2 | timings;
+#else
+ pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2;
+#endif
+ debug("PBR2: %08x POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2);
+
+ pcmp->pcmc_pbr3 = CONFIG_SYS_PCMCIA_PBR3;
+#if (CONFIG_SYS_PCMCIA_POR3 != 0)
+ pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3 | timings;
+#else
+ pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3;
+#endif
+ debug("PBR3: %08x POR3: %08x\n", pcmp->pcmc_pbr3, pcmp->pcmc_por3);
+
+ /*
+ * IDE 1
+ */
+ pcmp->pcmc_pbr4 = CONFIG_SYS_PCMCIA_PBR4;
+#if (CONFIG_SYS_PCMCIA_POR4 != 0)
+ pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4 | timings;
+#else
+ pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4;
+#endif
+ debug("PBR4: %08x POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4);
+
+ pcmp->pcmc_pbr5 = CONFIG_SYS_PCMCIA_PBR5;
+#if (CONFIG_SYS_PCMCIA_POR5 != 0)
+ pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5 | timings;
+#else
+ pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5;
+#endif
+ debug("PBR5: %08x POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5);
+
+ pcmp->pcmc_pbr6 = CONFIG_SYS_PCMCIA_PBR6;
+#if (CONFIG_SYS_PCMCIA_POR6 != 0)
+ pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6 | timings;
+#else
+ pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6;
+#endif
+ debug("PBR6: %08x POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6);
+
+ pcmp->pcmc_pbr7 = CONFIG_SYS_PCMCIA_PBR7;
+#if (CONFIG_SYS_PCMCIA_POR7 != 0)
+ pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7 | timings;
+#else
+ pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7;
+#endif
+ debug("PBR7: %08x POR7: %08x\n", pcmp->pcmc_pbr7, pcmp->pcmc_por7);
+
+}
+
+int ide_preinit(void)
+{
+ int i;
+ /* Initialize PIO timing tables */
+ for (i = 0; i <= IDE_MAX_PIO_MODE; ++i) {
+ pio_config_clk[i].t_setup =
+ PCMCIA_MK_CLKS(pio_config_ns[i].t_setup, gd->bus_clk);
+ pio_config_clk[i].t_length =
+ PCMCIA_MK_CLKS(pio_config_ns[i].t_length, gd->bus_clk);
+ pio_config_clk[i].t_hold =
+ PCMCIA_MK_CLKS(pio_config_ns[i].t_hold, gd->bus_clk);
+ debug("PIO Mode %d: setup=%2d ns/%d clk" " len=%3d ns/%d clk"
+ " hold=%2d ns/%d clk\n", i, pio_config_ns[i].t_setup,
+ pio_config_clk[i].t_setup, pio_config_ns[i].t_length,
+ pio_config_clk[i].t_length, pio_config_ns[i].t_hold,
+ pio_config_clk[i].t_hold);
+ }
+
+ return 0;
+}
+
+int ide_init_postreset(void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
+
+ /* PCMCIA / IDE initialization for common mem space */
+ pcmp->pcmc_pgcrb = 0;
+
+ /* start in PIO mode 0 - most relaxed timings */
+ pio_mode = 0;
+ set_pcmcia_timing(pio_mode);
+ return 0;
+}
+#endif /* CONFIG_IDE_8xx_DIRECT */
+
+#ifdef CONFIG_IDE_8xx_PCCARD
+int ide_preinit(void)
+{
+ ide_devices_found = 0;
+ /* initialize the PCMCIA IDE adapter card */
+ pcmcia_on();
+ if (!ide_devices_found)
+ return 1;
+ udelay(1000000);/* 1 s */
+ return 0;
+}
+#endif
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
/*
- * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
+ * (C) Copyright 2012
+ * Pavel Herrmann <morpheus.ibis@gmail.com>
*
* See file CREDITS for list of people who contributed to this
* project.
* MA 02111-1307 USA
*/
-#if defined(CONFIG_LPC2292)
-#include <asm/arch-lpc2292/lpc2292_registers.h>
-#else
-#error No hardware file defined for this configuration
-#endif
+#ifndef _MPC8XX_IDE_H_
+#define _MPC8XX_IDE_H_ 1
-#endif /* __ASM_ARCH_HARDWARE_H */
+#ifdef CONFIG_IDE_8xx_PCCARD
+int pcmcia_on(void);
+extern int ide_devices_found;
+#endif
+#endif
SECTIONS
{
- __u_boot_cmd_start = .;
- _u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__u_boot_sandbox_option_start = .;
_u_boot_sandbox_getopt : { *(.u_boot_sandbox_getopt) }
typedef struct global_data {
bd_t *bd;
unsigned long flags;
- unsigned long baudrate;
+ unsigned int baudrate;
unsigned long have_console; /* serial_init() was called */
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid? */
}
PROVIDE (_egot = .);
- PROVIDE (__u_boot_cmd_start = .);
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- . = ALIGN(4);
+
+ .u_boot_list : {
+ #include <u-boot.lst>
}
- PROVIDE (__u_boot_cmd_end = .);
PROVIDE (reloc_dst_end = .);
}
PROVIDE (_egot = .);
- PROVIDE (__u_boot_cmd_start = .);
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- . = ALIGN(4);
+
+ .u_boot_list : {
+ #include <u-boot.lst>
}
- PROVIDE (__u_boot_cmd_end = .);
PROVIDE (reloc_dst_end = .);
/* _reloc_dst_end = .; */
}
PROVIDE (_egot = .);
- PROVIDE (__u_boot_cmd_start = .);
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- . = ALIGN(4);
+
+ .u_boot_list : {
+ #include <u-boot.lst>
}
- PROVIDE (__u_boot_cmd_end = .);
PROVIDE (reloc_dst_end = .);
/* _reloc_dst_end = .; */
{
bd_t *bd;
unsigned long flags;
- unsigned long baudrate;
+ unsigned int baudrate;
unsigned long cpu_clk; /* CPU clock in Hz! */
unsigned long have_console; /* serial_init() was called */
#ifdef CONFIG_PRE_CONSOLE_BUFFER
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
- unsigned long bi_baudrate; /* Console Baudrate */
+ unsigned int bi_baudrate; /* Console Baudrate */
unsigned long bi_boot_params; /* where this board expects params */
} bd_t;
leon2_serial_putc_raw(c);
}
-static void leon2_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc(*s++);
- }
-}
-
static int leon2_serial_getc(void)
{
LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
.stop = NULL,
.setbrg = leon2_serial_setbrg,
.putc = leon2_serial_putc,
- .puts = leon2_serial_puts,
+ .puts = default_serial_puts,
.getc = leon2_serial_getc,
.tstc = leon2_serial_tstc,
};
leon3_serial_putc_raw(c);
}
-static void leon3_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc(*s++);
- }
-}
-
static int leon3_serial_getc(void)
{
if (!leon3_apbuart)
.stop = NULL,
.setbrg = leon3_serial_setbrg,
.putc = leon3_serial_putc,
- .puts = leon3_serial_puts,
+ .puts = default_serial_puts,
.getc = leon3_serial_getc,
.tstc = leon3_serial_tstc,
};
typedef struct global_data {
bd_t *bd;
unsigned long flags;
- unsigned long baudrate;
+ unsigned int baudrate;
unsigned long cpu_clk; /* CPU clock in Hz! */
unsigned long bus_clk;
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
- unsigned long bi_baudrate; /* Console Baudrate */
+ unsigned int bi_baudrate; /* Console Baudrate */
} bd_t;
#endif /* __ASSEMBLY__ */
/*
* We have to relocate the command table manually
*/
- fixup_cmdtable(&__u_boot_cmd_start,
- (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
+ fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+ ll_entry_count(cmd_tbl_t, cmd));
#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
#if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
.text : { *(.text*); }
. = ALIGN(4);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
+
. = ALIGN(4);
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = ALIGN(4);
.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
unsigned long gd_addr; /* Location of Global Data */
bd_t *bd;
unsigned long flags;
- unsigned long baudrate;
+ unsigned int baudrate;
unsigned long have_console; /* serial_init() was called */
#ifdef CONFIG_PRE_CONSOLE_BUFFER
unsigned long precon_buf_idx; /* Pre-Console buffer index */
#
-# (C) Copyright 2000-2006
+# (C) Copyright 2000, 2001, 2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# Adapted from ti/evm/Makefile
+#
# See file CREDITS for list of people who contributed to this
# project.
#
LIB = $(obj)lib$(BOARD).o
-COBJS = $(BOARD).o flash.o
+COBJS := eco5pk.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
-
-#########################################################################
--- /dev/null
+/*
+ * eco5pk.c - board file for 8D Technology's AM3517 based eco5pk board
+ *
+ * Based on am3517evm.c
+ *
+ * Copyright (C) 2011-2012 8D Technologies inc.
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/emac_defs.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <crc.h>
+#include <asm/mach-types.h>
+#include "eco5pk.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+ gpio_request(30, "RESOUT");
+ gpio_direction_output(30, 1);
+ return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */
+void set_muxconf_regs(void)
+{
+ MUX_ECO5_PK();
+}
--- /dev/null
+/*
+ * eco5.h - Header file for the 8D Technologies ECO5 board.
+ *
+ * Based on am3517evm.h
+ * Based on ti/evm/evm.h
+ *
+ * Copyright (C) 2011 8D Technologies inc.
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _ECO5PK_H__
+#define _ECO5PK_H__
+
+const omap3_sysinfo sysinfo = {
+ DDR_DISCRETE,
+ "ECO5 Board",
+ "NAND",
+};
+
+/*
+ * IEN - Input Enable
+ * IDIS - Input Disable
+ * PTD - Pull type Down
+ * PTU - Pull type Up
+ * DIS - Pull type selection is inactive
+ * EN - Pull type selection is active
+ * M0 - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_ECO5_PK() \
+ /* SDRC */\
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SDRC_CKE0), (M0)) \
+ MUX_VAL(CP(SDRC_CKE1), (M0)) \
+ MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) \
+ /* GPMC */\
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M3)) \
+ MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | DIS | M4)) \
+ MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) \
+ /* - ETH_nRESET*/\
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) \
+ /* DSS */\
+ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA0), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA1), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA2), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA3), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA4), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA5), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA6), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA7), (IEN | PTD | DIS | M4)) \
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA11), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA12), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \
+ /* CAMERA */\
+ MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+ /* - CAM_RESET*/\
+ MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) \
+ /* MMC */\
+ MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \
+ \
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTD | DIS | M0)) \
+ /* McBSP */\
+ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /* LED ACT */ \
+ \
+ MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_152*/\
+ /* - LCD_INI*/\
+ MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) /*GPIO_153*/\
+ /* - LCD_ENVDD */\
+ MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) /*GPIO_154*/\
+ /* - LCD_QVGA/nVGA */\
+ MUX_VAL(CP(MCBSP4_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_155*/\
+ /* - LCD_RESB */\
+ /* UART */\
+ MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) \
+ \
+ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \
+ \
+ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | DIS | M0)) \
+ MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) \
+ /* I2C */\
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \
+ /* McSPI */\
+ MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\
+ MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176*/\
+ /* - LAN_INTR*/\
+ MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)) \
+ \
+ MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \
+ /* LCD_EN_BACKLIGHT */\
+ MUX_VAL(CP(MCSPI2_CS1), (IDIS | PTD | EN | M4)) \
+ /* CCDC */\
+ MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M1)) \
+ MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M1)) \
+ MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M0)) \
+ /* RMII */\
+ MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \
+ MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \
+ MUX_VAL(CP(RMII_RXD0) , (IEN | PTD | M0)) \
+ MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \
+ MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \
+ MUX_VAL(CP(RMII_RXER), (PTD | M0)) \
+ MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \
+ MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \
+ MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \
+ MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \
+ /* HECC */\
+ MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(HECC1_RXD), (IEN | PTU | EN | M0)) \
+ /* HSUSB */\
+ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)) \
+ /* HDQ */\
+ MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)) \
+ /* Control and debug */\
+ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) \
+ /* SYS_nRESWARM */\
+ MUX_VAL(CP(SYS_NRESWARM), (IDIS | PTU | DIS | M4)) \
+ /* - GPIO30 */\
+ MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /* GPIO_2 */\
+ /* - PEN_IRQ */\
+ MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /* GPIO_3 */\
+ MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */\
+ MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /* GPIO_5 */\
+ MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /* GPIO_6 */\
+ MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /* GPIO_7 */\
+ MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /* GPIO_8 */\
+ /* - VIO_1V8*/\
+ MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \
+ \
+ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \
+ /* JTAG */\
+ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) \
+ /* ETK (ES2 onwards) */\
+ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)) \
+ /* Die to Die */\
+ MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \
+ MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0))
+
+#endif
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
#endif /* CONFIG_MPSC */
-static void marvell_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
static struct serial_device marvell_serial_drv = {
.name = "marvell_serial",
.start = marvell_serial_init,
.stop = NULL,
.setbrg = marvell_serial_setbrg,
.putc = marvell_serial_putc,
- .puts = marvell_serial_puts,
+ .puts = default_serial_puts,
.getc = marvell_serial_getc,
.tstc = marvell_serial_tstc,
};
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
net/libnet.o(.text*)
board/actux1/libactux1.o(.text*)
arch/arm/cpu/ixp/libixp.o(.text*)
- drivers/serial/libserial.o(.text*)
+ drivers/input/libinput.o(.text*)
. = env_offset;
common/env_embedded.o(.ppcenv)
*(.got)
}
. =.;
- __u_boot_cmd_start =.;
- .u_boot_cmd : {
- *(.u_boot_cmd)
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
}
- __u_boot_cmd_end =.;
. = ALIGN (4);
.rel.dyn : {
net/libnet.o(.text*)
board/actux2/libactux2.o(.text*)
arch/arm/cpu/ixp/libixp.o(.text*)
- drivers/serial/libserial.o(.text*)
+ drivers/input/libinput.o(.text*)
. = env_offset;
common/env_embedded.o(.ppcenv)
*(.got)
}
. =.;
- __u_boot_cmd_start =.;
- .u_boot_cmd : {
- *(.u_boot_cmd)
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
}
- __u_boot_cmd_end =.;
. = ALIGN (4);
.rel.dyn : {
net/libnet.o(.text*)
board/actux3/libactux3.o(.text*)
arch/arm/cpu/ixp/libixp.o(.text*)
- drivers/serial/libserial.o(.text*)
+ drivers/input/libinput.o(.text*)
. = env_offset;
common/env_embedded.o(.ppcenv)
*(.got)
}
. =.;
- __u_boot_cmd_start =.;
- .u_boot_cmd : {
- *(.u_boot_cmd)
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
}
- __u_boot_cmd_end =.;
. = ALIGN (4);
.rel.dyn : {
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
. = ALIGN(4);
.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
. = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ } >.sram
+ . = ALIGN(4);
.rel.dyn : {
__rel_dyn_start = .;
*(.rel*)
* the initialization code relocates the command table as
* well -- admittedly, this is just pure laziness ;-)
*/
- __u_boot_cmd_start = .;
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- }
+
. = ALIGN(4);
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
/* INIT DATA sections - "Small" data (see the gcc -G option)
* is always gp-relative. Here we make all init data sections
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
*/
OUTPUT_ARCH(m68k)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/m68k/cpu/mcf532x/start.o (.text)
- arch/m68k/lib/traps.o (.text)
- arch/m68k/lib/interrupts.o (.text)
- common/dlmalloc.o (.text)
- lib/zlib.o (.text)
+ arch/m68k/cpu/mcf532x/start.o (.text*)
. = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text)
+ common/env_embedded.o (.text*)
- *(.text)
-/* *(.fixup)*/
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
.reloc :
{
__got_start = .;
- *(.got)
+ KEEP(*(.got))
__got_end = .;
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
.bss :
{
_sbss = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.sbss*)
+ *(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .;
#include <asm/arch/clk.h>
#include <lcd.h>
#include <atmel_hlcdc.h>
+#include <atmel_mci.h>
#ifdef CONFIG_MACB
#include <net.h>
#endif
}
#endif /* CONFIG_ATMEL_SPI */
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bd)
+{
+ at91_mci_hw_init();
+
+ return atmel_mci_init((void *)ATMEL_BASE_HSMCI0);
+}
+#endif
+
int board_early_init_f(void)
{
at91_seriald_hw_init();
LIB = $(obj)lib$(BOARD).o
-COBJS := ../../nvidia/common/board.o
-COBJS += ../common/tamonten.o
+COBJS-y := ../common/tamonten.o
+include ../../nvidia/common/common.mk
+
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
LIB = $(obj)lib$(BOARD).o
-COBJS := ../../nvidia/common/board.o
-COBJS += ../common/tamonten.o
+COBJS-y := ../common/tamonten.o
+include ../../nvidia/common/common.mk
+
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
LIB = $(obj)lib$(BOARD).o
-COBJS := ../../nvidia/common/board.o
-COBJS += ../common/tamonten.o
+COBJS-y := ../common/tamonten.o
+include ../../nvidia/common/common.mk
+
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
+++ /dev/null
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2002
-# James F. Dougherty, Broadcom Corporation, jfd@broadcom.com
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS = $(BOARD).o flash.o ns16550.o serial.o m48t59y.o
-
-SOBJS = early_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-Broadcom 95xx BMW CPCI Platform
-
-Overview
-=========
-BMW is an MPC8245 system controller featuring:
-* 3U CPCI Form Factor
-* BCM5703 Gigabit Ethernet
-* M48T59Y NVRAM
-* 16MB DOC
-* DIP Socket for Socketed DOC up to 1GB
-* 64MB SDRAM
-* LCD Display
-* Configurable Jumper options for 66,85, and 100Mhz memory bus
-
-
-BMW System Address Map
-======================
-BMW uses the MPC8245 CHRP Address MAP B found in the MPC8245 Users Manual
-(P.121, Section 3.1 Address Maps, Address Map B). Other I/O devices found
-onboard the processor module are listed briefly below:
-
-0x00000000 - 0x40000000 - 64MB SDRAM SIMM
- (Unregistered PC-100 SDRAM DIMM Module)
-
-0xFF000000 - 0xFF001FFF - M-Systems DiskOnChip (TM) 2000
- TSOP 16MB (MD2211-D16-V3)
-
-0x70000000 - 0x70001FFF - M-Systems DiskOnChip (TM) 2000
- DIP32 (Socketed 16MB - 1GB ) *
- NOTE: this is not populated on all systems.
-
-0x7c000000 - 0x7c000000 - Reset Register
- (Write 0 to reset)
-
-0x7c000001 - 0x7c000001 - System LED
- (Clear Bit 7 to turn on, set to shut off)
-
-0x7c000002 - 0x7c000002 - M48T59 Watchdog IRQ3
- (Clear bit 7 to reset, set to assert IRQ3)
-
-0x7c000003 - 0x7c000003 - M48T59 Write-Protect Register
- (Clear bit 7 to make R/W, set to make R/O)
-
-0x7c002000 - 0x7c002003 - Infineon OSRAM DLR2416 4 Character
- 5x7 Dot Matrix Alphanumeric Display
- (Each byte sets the appropriate character)
-
-0x7c004000 - 0x7c005FF0 - SGS-THOMSON M48T59Y 8K NVRAM/RTC
- NVRAM Memory Region
-
-0x7c005FF0 - 0x7c005FFF - SGS-THOMSON M48T59Y 8K NVRAM/RTC
- Realtime Clock Registers
-
-0xFFF00000 - 0xFFF80000 - 512K PLCC32 BootRom
- (AMD AM29F040, ST 29W040B)
-
-0xFFF00100 - System Reset Vector
-
-
-IO/MMU (BAT) Configuration
-======================
-The following Block-Address-Translation (BAT) configuration
-is recommended to access all I/O devices.
-
-#define CONFIG_SYS_IBAT0L (0x00000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (0x00000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-
-Interrupt Mappings
-======================
-BMW uses MPC8245 discrete mode interrupts. With the following
-hardwired mappings:
-
-BCM5701 10/100/1000 Ethernet IRQ1
-CompactPCI Interrupt A IRQ2
-RTC/Watchdog Interrupt IRQ3
-Internal NS16552 UART IRQ4
-
-
-Jumper Settings
-======================
-
-BMW has a jumper (JP600) for selecting 66, 85, or 100Mhz memory bus.
-A jumper (X) is a 0 bit.
-
-Hence 66= 10110
- 85= 11000
- 100= 10000
-
-Jumper Settings for various Speeds
-=======================
-J1 J2 J3 J4 J5
- X X 66Mhz
-=======================
-J1 J2 J3 J4 J5
- X X X 85Mhz
-=======================
-J1 J2 J3 J4 J5
- X X X X 100Mhz
-=======================
-
-Obviously, 100Mhz memory bus is recommended for optimum performance.
-
-
-U-Boot
-===============
-Broadcom BMW board is supported under config_BWM option.
-Supported features:
-
-- NVRAM setenv/getenv (used by Linux Kernel for configuration variables)
-- BCM570x TFTP file transfer support
-- LCD Display Support
-- DOC Support - (underway)
-
-
-U-Boot 1.2.0 (Aug 6 2002 - 17:44:48)
-
-CPU: MPC8245 Revision 16.20 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B)
-Built: Aug 6 2002 at 17:44:37
-Local Bus at 66 MHz
-DRAM: 64 MB
-FLASH: 4095 MB
-In: serial
-Out: serial
-Err: serial
-DOC: No DiskOnChip found
-Hit any key to stop autoboot: 0
-=>printenv
-bootdelay=5
-baudrate=9600
-clocks_in_mhz=1
-hostname=switch-2
-bootcmd=tftp 100000 vmlinux.img;bootm
-gateway=10.16.64.1
-ethaddr=00:00:10:18:10:10
-nfsroot=172.16.40.111:/boot/root-fs
-filesize=5ec8c
-netmask=255.255.240.0
-ipaddr=172.16.40.114
-serverip=172.16.40.111
-root=/dev/nfs
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 315/8172 bytes
-=>boot
-
-
-DevTools
-========
-ELDK
- DENX Embedded Linux Development Kit
-
-ROM Emulator
- Grammar Engine PROMICE P1160-90-AI21E (2MBx8bit, 90ns access time)
- Grammar Engine PL32E 32Pin PLCC Emulation cables
- Grammar Engine 3VA8CON (3Volt adapter with Short cables)
- Grammar Engine FPNET PromICE Ethernet Adapters
-
-ICE
- WRS/EST VisionICE-II (PPC8240)
-
-
-=>reset
-
-
-U-Boot 1.2.0 (Aug 6 2002 - 17:44:48)
-
-CPU: MPC8245 Revision 16.20 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B)
-Built: Aug 6 2002 at 17:44:37
-Local Bus at 66 MHz
-DRAM: 64 MB
-FLASH: 4095 MB
-In: serial
-Out: serial
-Err: serial
-DOC: No DiskOnChip found
-Hit any key to stop autoboot: 0
-
-Broadcom BCM5701 1000Base-T: bus 0, device 13, function 0: MBAR=0x80100000
-BCM570x PCI Memory base address @0x80100000
-eth0:Broadcom BCM5701 1000Base-T: 100 Mbps half duplex link up, flow control OFF
-eth0: Broadcom BCM5701 1000Base-T @0x80100000,node addr 000010181010
-eth0: BCM5700 with Broadcom BCM5701 Integrated Copper transceiver found
-eth0: 32-bit PCI 33MHz, MTU: 1500,Rx Checksum ON
-ARP broadcast 1
-TFTP from server 172.16.40.111; our IP address is 172.16.40.114
-Filename 'vmlinux.img'.
-Load address: 0x100000
-Loading: #################################################################
- ####################################T #############################
- ######################
-done
-Bytes transferred = 777199 (bdbef hex)
-
-eth0:Broadcom BCM5701 1000Base-T,HALT,POWER DOWN,done - offline.
-## Booting image at 00100000 ...
- Image Name: vmlinux.bin.gz
- Created: 2002-08-06 6:30:13 UTC
- Image Type: PowerPC Linux Kernel Image (gzip compressed)
- Data Size: 777135 Bytes = 758 kB = 0 MB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
-Memory BAT mapping: BAT2=64Mb, BAT3=0Mb, residual: 0Mb
-Linux version 2.4.19-rc3 (jfd@que) (gcc version 2.95.3 20010111 (prerelease/franzo/20010111)) #168 Mon Aug 5 23:29:20 PDT 2002
-CPU:82xx: 32 I-Cache Block Size, 32 D-Cache Block Size PVR: 0x810000
-U-Boot Environment: 0xc01b08f0
-IP PNP: 802.3 Ethernet Address=<0:0:10:18:10:10>
-cpu0: MPC8245/KAHLUA-II : BMW Platform : 64MB RAM: BPLD Rev. 6e
-NOTICE: mounting root file system via NFS
-IP PNP: switch-2: eth0 IP 172.16.40.114/255.255.240.0 gateway 10.16.64.1 server 172.16.40.111
-On node 0 totalpages: 16384
-zone(0): 16384 pages.
-zone(1): 0 pages.
-zone(2): 0 pages.
-Kernel command line: console=ttyS0,9600 ip=172.16.40.114:172.16.40.111:10.16.64.1:255.255.240.0:switch-2:eth0 root=/dev/nfs rw nfsroot=172.16.40.111:/boot/root-fs,timeo=200,retrans=500 nfsaddrs=172.16.40.114:172.16.40.111
-root_dev_setup:/dev/nfs or 00:ff
-time_init: decrementer frequency = 16.501145 MHz
-Calibrating delay loop... 175.71 BogoMIPS
-Memory: 62572k available (1396k kernel code, 436k data, 100k init, 0k highmem)
-Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
-Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
-Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
-Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
-Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
-POSIX conformance testing by UNIFIX
-PCI: Probing PCI hardware
-Linux NET4.0 for Linux 2.4
-Based upon Swansea University Computer Society NET3.039
-Initializing RT netlink socket
-Starting kswapd
-devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
-devfs: devfs_debug: 0x0
-devfs: boot_options: 0x1
-Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
-pty: 256 Unix98 ptys configured
-Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
-Testing ttyS0 (0xf7f51500, 0xf7f51500)...
-Testing ttyS1 (0xfc004600, 0xfc004600)...
-ttyS00 at 0xf7f51500 (irq = 24) is a ST16650
-ttyS01 at 0xfc004600 (irq = 25) is a 16550A
-Real Time Clock Driver v1.10e
-RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
-loop: loaded (max 8 devices)
-TFFS 5.1.1 Flash disk driver for DiskOnChip
-Copyright (C) 1998,2001 M-Systems Flash Disk Pioneers Ltd.
-DOC device(s) found: 1
-fl_init: registered device at major: 100
-fl_geninit: registered device at major: 100
-Partition check:
- fla: p1
-partition: /dev/fl/0: start_sect: 0,nr_sects: 32000 Fl_blk_size[]: 16000KB
-partition: /dev/fl/1: start_sect: 2,nr_sects: 31998 Fl_blk_size[]: 15999KB
-partition: /dev/fl/2: start_sect: 0,nr_sects: 0 Fl_blk_size[]: 0KB
-partition: /dev/fl/3: start_sect: 0,nr_sects: 0 Fl_blk_size[]: 0KB
-Broadcom Gigabit Ethernet Driver bcm5700 ver. 3.0.7 (07/17/02)
-eth0: Broadcom BCM5701 found at mem bfff0000, IRQ 1, node addr 000010181010
-eth0: Broadcom BCM5701 Integrated Copper transceiver found
-eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON
-bond0 registered without MII link monitoring, in bonding mode.
-rtc: unable to get misc minor
-NET4: Linux TCP/IP 1.0 for NET4.0
-IP Protocols: ICMP, UDP, TCP, IGMP
-IP: routing cache hash table of 512 buckets, 4Kbytes
-TCP: Hash tables configured (established 4096 bind 4096)
-bcm5700: eth0 NIC Link is UP, 100 Mbps half duplex
-IP-Config: Gateway not on directly connected network.
-NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
-802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
-All bugs added by David S. Miller <davem@redhat.com>
-Looking up port of RPC 100003/2 on 172.16.40.111
-Looking up port of RPC 100005/1 on 172.16.40.111
-VFS: Mounted root (nfs filesystem).
-Mounted devfs on /dev
-Freeing unused kernel memory: 100k init
-INIT: version 2.78 booting
-Mounting local filesystems...
-not mounted anything
-Setting up symlinks in /dev...done.
-Setting up extra devices in /dev...done.
-Starting devfsd...Started device management daemon for /dev
-INIT: Entering runlevel: 2
-Starting internet superserver: inetd.
-
-
-Welcome to Linux/PPC
-MPC8245/BMW
-
-
-switch-2 login: root
-Password:
-PAM_unix[49]: (login) session opened for user root by LOGIN(uid=0)
-Last login: Thu Nov 25 11:51:14 1920 on console
-
-
-Welcome to Linux/PPC
-MPC8245/BMW
-
-
-login[49]: ROOT LOGIN on `console'
-
-root@switch-2:~# cat /proc/cpuinfo
-cpu : 82xx
-revision : 16.20 (pvr 8081 1014)
-bogomips : 175.71
-vendor : Broadcom
-machine : BMW/MPC8245
-root@switch-2:~#
+++ /dev/null
-/*
- * (C) Copyright 2002
- * James F. Dougherty, Broadcom Corporation, jfd@broadcom.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <malloc.h>
-#include <stdio_dev.h>
-#include <net.h>
-#include <timestamp.h>
-#include <dtt.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <linux/mtd/doc2000.h>
-
-#include "bmw.h"
-#include "m48t59y.h"
-#include <pci.h>
-
-
-int checkboard(void)
-{
- ulong busfreq = get_bus_freq(0);
- char buf[32];
-
- puts ("Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B)\n");
- printf("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
- /* printf("MPLD: Revision %d\n", SYS_REVID_GET()); */
- printf("Local Bus at %s MHz\n", strmhz(buf, busfreq));
- return 0;
-}
-
-phys_size_t initdram(int board_type)
-{
- return 64*1024*1024;
-}
-
-
-void
-get_tod(void)
-{
- int year, month, day, hour, minute, second;
-
- m48_tod_get(&year,
- &month,
- &day,
- &hour,
- &minute,
- &second);
-
- printf(" Current date/time: %d/%d/%d %d:%d:%d \n",
- month, day, year, hour, minute, second);
-
-}
-
-/*
- * EPIC, PCI, and I/O devices.
- * Initialize Mousse Platform, probe for PCI devices,
- * Query configuration parameters if not set.
- */
-int misc_init_f (void)
-{
-#if 0
- m48_tod_init(); /* Init SGS M48T59Y TOD/NVRAM */
- printf("RTC: M48T589 TOD/NVRAM (%d) bytes\n",
- TOD_NVRAM_SIZE);
- get_tod();
-#endif
-
- sys_led_msg("BOOT");
- return 0;
-}
-
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-struct pci_controller hose;
-
-void pci_init_board (void)
-{
- pci_mpc824x_init(&hose);
- /* pci_dev_init(0); */
-}
-
-/*
- * Write characters to LCD display.
- * Note that the bytes for the first character is the last address.
- */
-void
-sys_led_msg(char* msg)
-{
- LED_REG(0) = msg[3];
- LED_REG(1) = msg[2];
- LED_REG(2) = msg[1];
- LED_REG(3) = msg[0];
-}
-
-#ifdef CONFIG_CMD_DOC
-/*
- * Map onboard TSOP-16MB DOC FLASH chip.
- */
-void doc_init (void)
-{
- doc_probe(DOC_BASE_ADDR);
-}
-#endif
-
-#define NV_ADDR ((volatile unsigned char *) CONFIG_ENV_ADDR)
-
-/* Read from NVRAM */
-void*
-nvram_read(void *dest, const long src, size_t count)
-{
- int i;
- volatile unsigned char* d = (unsigned char*)dest;
- volatile unsigned char* s = (unsigned char*)src;
-
- for( i = 0; i < count;i++)
- d[i] = s[i];
-
- return dest;
-}
-
-/* Write to NVRAM */
-void
-nvram_write(long dest, const void *src, size_t count)
-{
- int i;
- volatile unsigned char* d = (unsigned char*)dest;
- volatile unsigned char* s = (unsigned char*)src;
-
- SYS_TOD_UNPROTECT();
-
- for( i = 0; i < count;i++)
- d[i] = s[i];
-
- SYS_TOD_PROTECT();
-}
+++ /dev/null
-/*
- * BMW/MPC8245 Board definitions.
- * For more info, see http://www.vooha.com/
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * James Dougherty (jfd@broadcom.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __BMW_H
-#define __BMW_H
-
-/* System addresses */
-
-#define PCI_SPECIAL_BASE 0xfe000000
-#define PCI_SPECIAL_SIZE 0x01000000
-
-#define EUMBBAR_VAL 0x80500000 /* Location of EUMB region */
-#define EUMBSIZE 0x00100000 /* Size of EUMB region */
-
-/* Extended ROM space devices */
-#define DOC_BASE_ADDR 0xff000000 /* Onboard DOC TSOP 16MB */
-#define DOC2_BASE_ADDR 0x70000000 /* DIP32 socket -> 1GB */
-#define XROM_BASE_ADDR 0x7c000000 /* RCS2 (PAL / Satellite IO) */
-#define PLD_REG_BASE XROM_BASE_ADDR
-#define LED_REG_BASE (XROM_BASE_ADDR | 0x2000)
-#define TOD_BASE (XROM_BASE_ADDR | 0x4000)
-#define LED_REG(x) (*(volatile unsigned char *) \
- (LED_REG_BASE + (x)))
-#define XROM_DEV_SIZE 0x00006000
-
-#define ENET_DEV_BASE 0x80000000
-
-#define PLD_REG(off) (*(volatile unsigned char *)\
- (PLD_REG_BASE + (off)))
-
-#define PLD_REVID_B1 0x7f /* Fix me */
-#define PLD_REVID_B2 0x01 /* Fix me */
-
-#define SYS_HARD_RESET() { for (;;) PLD_REG(0) = 0; } /* clr 0x80 bit */
-#define SYS_REVID_GET() ((int) PLD_REG(0) & 0x7f)
-#define SYS_LED_OFF() (PLD_REG(1) |= 0x80)
-#define SYS_LED_ON() (PLD_REG(1) &= ~0x80)
-#define SYS_WATCHDOG_IRQ3() (PLD_REG(2) |= 0x80)
-#define SYS_WATCHDOG_RESET() (PLD_REG(2) &= ~0x80)
-#define SYS_TOD_PROTECT() (PLD_REG(3) |= 0x80)
-#define SYS_TOD_UNPROTECT() (PLD_REG(3) &= ~0x80)
-
-#define TOD_REG_BASE (TOD_BASE | 0x1ff0)
-#define TOD_NVRAM_BASE TOD_BASE
-#define TOD_NVRAM_SIZE 0x1ff0
-#define TOD_NVRAM_LIMIT (TOD_NVRAM_BASE + TOD_NVRAM_SIZE)
-#define RTC(r) (TOD_BASE + r)
-
-/* Onboard BCM570x device */
-#define PCI_ENET_IOADDR 0x80000000
-#define PCI_ENET_MEMADDR 0x80000000
-
-
-#ifndef __ASSEMBLY__
-/* C Function prototypes */
-void sys_led_msg(char* msg);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __BMW_H */
+++ /dev/null
-#include <ppc_asm.tmpl>
-#include <mpc824x.h>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#define USE_V2_INIT 1 /* Jimmy Blair's initialization. */
-
-
-/*
- * Initialize the MMU using BAT entries and hardwired TLB
- * This obviates the need for any code in cpu_init_f which
- * configures the BAT registers.
-*/
-#define MEMORY_MGMT_MSR_BITS (MSR_DR | MSR_IR) /* Data and Inst Relocate */
- .global iommu_setup
- /* Initialize IO/MMU mappings via BAT method Ch. 7,
- * PPC Programming Reference
- */
-iommu_setup:
-
-/* initialize the BAT registers (SPRs 528 - 543 */
-#define mtibat0u(x) mtspr 528,(x) /* SPR 528 (IBAT0U) */
-#define mtibat0l(x) mtspr 529,(x) /* SPR 529 (IBAT0L) */
-#define mtibat1u(x) mtspr 530,(x) /* SPR 530 (IBAT1U) */
-#define mtibat1l(x) mtspr 531,(x) /* SPR 531 (IBAT1L) */
-#define mtibat2u(x) mtspr 532,(x) /* SPR 532 (IBAT2U) */
-#define mtibat2l(x) mtspr 533,(x) /* SPR 533 (IBAT2L) */
-#define mtibat3u(x) mtspr 534,(x) /* SPR 534 (IBAT3U) */
-#define mtibat3l(x) mtspr 535,(x) /* SPR 535 (IBAT3L) */
-#define mtdbat0u(x) mtspr 536,(x) /* SPR 536 (DBAT0U) */
-#define mtdbat0l(x) mtspr 537,(x) /* SPR 537 (DBAT0L) */
-#define mtdbat1u(x) mtspr 538,(x) /* SPR 538 (DBAT1U) */
-#define mtdbat1l(x) mtspr 539,(x) /* SPR 539 (DBAT1L) */
-#define mtdbat2u(x) mtspr 540,(x) /* SPR 540 (DBAT2U) */
-#define mtdbat2l(x) mtspr 541,(x) /* SPR 541 (DBAT2L) */
-#define mtdbat3u(x) mtspr 542,(x) /* SPR 542 (DBAT3U) */
-#define mtdbat3l(x) mtspr 543,(x) /* SPR 543 (DBAT3L) */
-
-
-/* PowerPC processors do not necessarily initialize the BAT
- registers on power-up or reset. So they are in an unknown
- state. Before programming the BATs for the first time, all
- BAT registers MUST have their Vs and Vp bits cleared in the
- upper BAT half in order to avoid possibly having 2 BATs
- valid and mapping the same memory region.
-
- The reason for this is that, even with address translation
- disabled, multiple BAT hits for an address are treated as
- programming errors and can cause unpredictable results.
-
- It is up to the software to make sure it never has 2 IBAT
- mappings or 2 DBAT mappings that are valid for the same
- addresses. It is not necessary to perform this code
- sequence every time the BATs are programmed, only when
- there is a possibility that there may be overlapping BAT
- entries.
-
- When programming the BATs in non-reset scenarios, even if
- you are sure that your new mapping will not temporarily
- create overlapping regions, it is still a wise idea to
- invalidate a BAT entry by setting its upper BAT register to
- all 0's before programming it. This will avoid having a
- BAT marked valid that is in an unknown or transient state
-*/
-
- addis r5,0,0x0000
- mtibat0u(r5)
- mtibat0l(r5)
- mtibat1u(r5)
- mtibat1l(r5)
- mtibat2u(r5)
- mtibat2l(r5)
- mtibat3u(r5)
- mtibat3l(r5)
- mtdbat0u(r5)
- mtdbat0l(r5)
- mtdbat1u(r5)
- mtdbat1l(r5)
- mtdbat2u(r5)
- mtdbat2l(r5)
- mtdbat3u(r5)
- mtdbat3l(r5)
- isync
-
-/*
- * Set up I/D BAT0
- */
- lis r4, CONFIG_SYS_DBAT0L@h
- ori r4, r4, CONFIG_SYS_DBAT0L@l
- lis r3, CONFIG_SYS_DBAT0U@h
- ori r3, r3, CONFIG_SYS_DBAT0U@l
-
- mtdbat0l(r4)
- isync
- mtdbat0u(r3)
- isync
- sync
-
- lis r4, CONFIG_SYS_IBAT0L@h
- ori r4, r4, CONFIG_SYS_IBAT0L@l
- lis r3, CONFIG_SYS_IBAT0U@h
- ori r3, r3, CONFIG_SYS_IBAT0U@l
-
- isync
- mtibat0l(r4)
- isync
- mtibat0u(r3)
- isync
-
-/*
- * Set up I/D BAT1
- */
- lis r4, CONFIG_SYS_IBAT1L@h
- ori r4, r4, CONFIG_SYS_IBAT1L@l
- lis r3, CONFIG_SYS_IBAT1U@h
- ori r3, r3, CONFIG_SYS_IBAT1U@l
-
- isync
- mtibat1l(r4)
- isync
- mtibat1u(r3)
- isync
- mtdbat1l(r4)
- isync
- mtdbat1u(r3)
- isync
- sync
-
-/*
- * Set up I/D BAT2
- */
- lis r4, CONFIG_SYS_IBAT2L@h
- ori r4, r4, CONFIG_SYS_IBAT2L@l
- lis r3, CONFIG_SYS_IBAT2U@h
- ori r3, r3, CONFIG_SYS_IBAT2U@l
-
- isync
- mtibat2l(r4)
- isync
- mtibat2u(r3)
- isync
- mtdbat2l(r4)
- isync
- mtdbat2u(r3)
- isync
- sync
-
-/*
- * Setup I/D BAT3
- */
- lis r4, CONFIG_SYS_IBAT3L@h
- ori r4, r4, CONFIG_SYS_IBAT3L@l
- lis r3, CONFIG_SYS_IBAT3U@h
- ori r3, r3, CONFIG_SYS_IBAT3U@l
-
- isync
- mtibat3l(r4)
- isync
- mtibat3u(r3)
- isync
- mtdbat3l(r4)
- isync
- mtdbat3u(r3)
- isync
- sync
-
-
-/*
- * Invalidate all 64 TLB's
- */
- lis r3, 0
- mtctr r3
- lis r5, 4
-
-tlblp:
- tlbie r3
- sync
- addi r3, r3, 0x1000
- cmplw r3, r5
- blt tlblp
-
- sync
-
-/*
- * Enable Data Translation
- */
- lis r4, MEMORY_MGMT_MSR_BITS@h
- ori r4, r4, MEMORY_MGMT_MSR_BITS@l
- mfmsr r3
- or r3, r4, r3
- mtmsr r3
- isync
- sync
-
- blr
-
-
-#ifdef USE_V2_INIT
-/* #define USER_I_CACHE_ENABLE 1*/ /* Fast rom boots */
-/* Macro for hiadjust and lo */
-#define HIADJ(arg) arg@ha
-#define HI(arg) arg@h
-#define LO(arg) arg@l
-
-#undef LOADPTR
-#define LOADPTR(reg,const32) \
- addis reg,r0,HIADJ(const32); addi reg,reg,LO(const32)
-
-.globl early_init_f
-
-early_init_f:
-/* MPC8245/BMW CPCI System Init
- * Jimmy Blair, Broadcom Corp, 2002.
- */
- mflr r11
- /* Zero-out registers */
-
- addis r0,r0,0
- mtspr SPRG0,r0
- mtspr SPRG1,r0
- mtspr SPRG2,r0
- mtspr SPRG3,r0
-
- /* Set MPU/MSR to a known state. Turn on FP */
-
- LOADPTR (r3, MSR_FP)
- sync
- mtmsr r3
- isync
-
- /* Init the floating point control/status register */
-
- mtfsfi 7,0x0
- mtfsfi 6,0x0
- mtfsfi 5,0x0
- mtfsfi 4,0x0
- mtfsfi 3,0x0
- mtfsfi 2,0x0
- mtfsfi 1,0x0
- mtfsfi 0,0x0
- isync
-
- /* Set MPU/MSR to a known state. Turn off FP */
-
-#if 1 /* Turn off floating point (remove to keep FP on) */
- andi. r3, r3, 0
- sync
- mtmsr r3
- isync
-#endif
-
- /* Init the Segment registers */
-
- andi. r3, r3, 0
- isync
- mtsr 0,r3
- isync
- mtsr 1,r3
- isync
- mtsr 2,r3
- isync
- mtsr 3,r3
- isync
- mtsr 4,r3
- isync
- mtsr 5,r3
- isync
- mtsr 6,r3
- isync
- mtsr 7,r3
- isync
- mtsr 8,r3
- isync
- mtsr 9,r3
- isync
- mtsr 10,r3
- isync
- mtsr 11,r3
- isync
- mtsr 12,r3
- isync
- mtsr 13,r3
- isync
- mtsr 14,r3
- isync
- mtsr 15,r3
- isync
-
- /* Turn off data and instruction cache control bits */
-
- mfspr r3, HID0
- isync
- rlwinm r4, r3, 0, 18, 15 /* r4 has ICE and DCE bits cleared */
- sync
- isync
- mtspr HID0, r4 /* HID0 = r4 */
- isync
-
- /* Get cpu type */
-
- mfspr r28, PVR
- rlwinm r28, r28, 16, 16, 31
-
- /* invalidate the MPU's data/instruction caches */
-
- lis r3, 0x0
- cmpli 0, 0, r28, CPU_TYPE_603
- beq cpuIs603
- cmpli 0, 0, r28, CPU_TYPE_603E
- beq cpuIs603
- cmpli 0, 0, r28, CPU_TYPE_603P
- beq cpuIs603
- cmpli 0, 0, r28, CPU_TYPE_604R
- bne cpuNot604R
-
-cpuIs604R:
- lis r3, 0x0
- mtspr HID0, r3 /* disable the caches */
- isync
- ori r4, r4, 0x0002 /* disable BTAC by setting bit 30 */
-
-cpuNot604R:
- ori r3, r3, (HID0_ICFI |HID0_DCI)
-
-cpuIs603:
- ori r3, r3, (HID0_ICE | HID0_DCE)
- or r4, r4, r3 /* set bits */
- sync
- isync
- mtspr HID0, r4 /* HID0 = r4 */
- andc r4, r4, r3 /* clear bits */
- isync
- cmpli 0, 0, r28, CPU_TYPE_604
- beq cpuIs604
- cmpli 0, 0, r28, CPU_TYPE_604E
- beq cpuIs604
- cmpli 0, 0, r28, CPU_TYPE_604R
- beq cpuIs604
- mtspr HID0, r4
- isync
-
-#ifdef USER_I_CACHE_ENABLE
- b instCacheOn603
-#else
- b cacheEnableDone
-#endif
-
-cpuIs604:
- LOADPTR (r5, 0x1000) /* loop count, 0x1000 */
- mtspr CTR, r5
-loopDelay:
- nop
- bdnz loopDelay
- isync
- mtspr HID0, r4
- isync
-
- /* turn the Instruction cache ON for faster FLASH ROM boots */
-
-#ifdef USER_I_CACHE_ENABLE
-
- ori r4, r4, (HID0_ICE | HID0_ICFI)
- isync /* Synchronize for ICE enable */
- b writeReg4
-instCacheOn603:
- ori r4, r4, (HID0_ICE | HID0_ICFI)
- rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */
-
- /*
- * The setting of the instruction cache enable (ICE) bit must be
- * preceded by an isync instruction to prevent the cache from being
- * enabled or disabled while an instruction access is in progress.
- */
- isync
-writeReg4:
- mtspr HID0, r4 /* Enable Instr Cache & Inval cache */
- cmpli 0, 0, r28, CPU_TYPE_604
- beq cacheEnableDone
- cmpli 0, 0, r28, CPU_TYPE_604E
- beq cacheEnableDone
-
- mtspr HID0, r3 /* using 2 consec instructions */
- /* PPC603 recommendation */
-#endif
-cacheEnableDone:
-
- /* Detect map A or B */
-
- addis r5,r0, HI(CHRP_REG_ADDR)
- addis r6,r0, HI(CHRP_REG_DATA)
- LOADPTR (r7, KAHLUA_ID) /* Kahlua PCI controller ID */
- LOADPTR (r8, BMC_BASE)
-
- stwbrx r8,0,(r5)
- lwbrx r3,0,(r6) /* Store read value to r3 */
- cmp 0,0,r3,r7
- beq cr0, X4_KAHLUA_START
-
- /* It's not an 8240, is it an 8245? */
-
- LOADPTR (r7, KAHLUA2_ID) /* Kahlua PCI controller ID */
- cmp 0,0,r3,r7
- beq cr0, X4_KAHLUA_START
-
- /* Save the PCI controller type in r7 */
- mr r7, r3
-
- LOADPTR (r5, PREP_REG_ADDR)
- LOADPTR (r6, PREP_REG_DATA)
-
-X4_KAHLUA_START:
- /* MPC8245 changes begin here */
- LOADPTR (r3, MPC107_PCI_CMD) /* PCI command reg */
- stwbrx r3,0,r5
- li r4, 6 /* Command register value */
- sthbrx r4, 0, r6
-
- LOADPTR (r3, MPC107_PCI_STAT) /* PCI status reg */
- stwbrx r3,0,r5
- li r4, -1 /* Write-to-clear all bits */
- li r3, 2 /* PCI_STATUS is at +2 offset */
- sthbrx r4, r3, r6
-
- /*-------PROC_INT1_ADR */
-
- LOADPTR (r3, PROC_INT1_ADR) /* Processor I/F Config 1 reg. */
- stwbrx r3,0,r5
- LOADPTR (r4, 0xff141b98)
- stwbrx r4,0,r6
-
- /*-------PROC_INT2_ADR */
-
- LOADPTR (r3, PROC_INT2_ADR) /* Processor I/F Config 2 reg. */
- stwbrx r3,0,r5
- lis r4, 0x2000 /* Flush PCI config writes */
- stwbrx r4,0,r6
-
- LOADPTR (r9, KAHLUA2_ID)
- cmpl 0, 0, r7, r9
- bne L1not8245
-
- /* MIOCR1 -- turn on bit for DLL delay */
-
- LOADPTR (r3, MIOCR1_ADR_X)
- stwbrx r3,0,r5
- li r4, 0x04
- stb r4, MIOCR1_SHIFT(r6)
-
- /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
- /* SDRAM_CLK_DEL (0x77)*/
-
- LOADPTR (r3, MIOCR2_ADR_X)
- stwbrx r3,0,r5
- li r4, 0x10
- stb r4, MIOCR2_SHIFT(r6)
-
- /* PMCR2 -- set PCI hold delay to <10>b for 33 MHz */
-
- LOADPTR (r3, PMCR2_ADR_X)
- stwbrx r3,0,r5
- li r4, 0x20
- stb r4, PMCR2_SHIFT(r6)
-
- /* Initialize EUMBBAR early since 8245 has internal UART in EUMB */
-
- LOADPTR (r3, EUMBBAR)
- stwbrx r3,0,r5
- LOADPTR (r4, CONFIG_SYS_EUMB_ADDR)
- stwbrx r4,0,r6
-
-L1not8245:
-
- /* Toggle the DLL reset bit in AMBOR */
-
- LOADPTR (r3, AMBOR)
- stwbrx r3,0,r5
- lbz r4, 0(r6)
-
- andi. r4, r4, 0xdf
- stb r4, 0(r6) /* Clear DLL_RESET */
- sync
-
- ori r4, r4, 0x20 /* Set DLL_RESET */
- stb r4, 0(r6)
- sync
-
- andi. r4, r4, 0xdf
- stb r4, 0(r6) /* Clear DLL_RESET */
-
-
- /* Enable RCS2, use supplied timings */
- LOADPTR (r3, ERCR1)
- stwbrx r3,0,r5
- LOADPTR (r4, 0x80408000)
- stwbrx r4,0,r6
-
- /* Disable RCS3 parameters */
- LOADPTR (r3, ERCR2)
- stwbrx r3,0,r5
- LOADPTR (r4, 0x00000000)
- stwbrx r4,0,r6
-
- /* RCS3 at 0x70000000, 64KBytes */
- LOADPTR (r3, ERCR2)
- stwbrx r3,0,r5
- LOADPTR (r4, 0x00000004)
- stwbrx r4,0,r6
-
- /*-------MCCR1 */
-
-#ifdef INCLUDE_ECC
-#define MC_ECC 1
-#else /* INCLUDE_ECC */
-#define MC_ECC 0
-#endif /* INCLUDE_ECC */
-
-#define MC1_ROMNAL 8 /* 0-15 */
-#define MC1_ROMFAL 11 /* 0-31 */
-#define MC1_DBUS_SIZE 0 /* 0-3, read only */
-#define MC1_BURST 0 /* 0-1 */
-#define MC1_MEMGO 0 /* 0-1 */
-#define MC1_SREN 1 /* 0-1 */
-#define MC1_RAM_TYPE 0 /* 0-1 */
-#define MC1_PCKEN MC_ECC /* 0-1 */
-#define MC1_BANKBITS 0x5555 /* 2 bits/bank 7-0 */
-
- LOADPTR (r3, MEM_CONT1_ADR) /* Set MCCR1 (F0) */
- stwbrx r3,0,r5
- LOADPTR(r4, \
- MC1_ROMNAL << 28 | MC1_ROMFAL << 23 | \
- MC1_DBUS_SIZE << 21 | MC1_BURST << 20 | \
- MC1_MEMGO << 19 | MC1_SREN << 18 | \
- MC1_RAM_TYPE << 17 | MC1_PCKEN << 16 )
- li r3, MC1_BANKBITS
- cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
- bne BankBitsAdd
- cmpli 0, 0, r3, 0x5555
- beq K2BankBitsHack /* On 8245, 5555 ==> 0 */
-BankBitsAdd:
- ori r4, r3, 0
-K2BankBitsHack:
- stwbrx r4, 0, r6
-
- /*------- MCCR2 */
-
-#define MC2_TS_WAIT_TIMER 0 /* 0-7 */
-#define MC2_ASRISE 8 /* 0-15 */
-#define MC2_ASFALL 4 /* 0-15 */
-#define MC2_INLINE_PAR_NOT_ECC 0 /* 0-1 */
-#define MC2_WRITE_PARITY_CHK_EN MC_ECC /* 0-1 */
-#define MC2_INLRD_PARECC_CHK_EN MC_ECC /* 0-1 */
-#define MC2_ECC_EN 0 /* 0-1 */
-#define MC2_EDO 0 /* 0-1 */
-/*
-* N.B. This refresh interval looks good up to 85 MHz with Hynix SDRAM.
-* May need to be decreased for 100 MHz
-*/
-#define MC2_REFINT 0x3a5 /* 0-0x3fff */
-#define MC2_RSV_PG 0 /* 0-1 */
-#define MC2_RMW_PAR MC_ECC /* 0-1 */
-
- LOADPTR (r3, MEM_CONT2_ADR) /* Set MCCR2 (F4) */
- stwbrx r3,0,r5
- LOADPTR(r4, \
- MC2_TS_WAIT_TIMER << 29 | MC2_ASRISE << 25 | \
- MC2_ASFALL << 21 | MC2_INLINE_PAR_NOT_ECC << 20 | \
- MC2_WRITE_PARITY_CHK_EN << 19 | \
- MC2_INLRD_PARECC_CHK_EN << 18 | \
- MC2_ECC_EN << 17 | MC2_EDO << 16 | \
- MC2_REFINT << 2 | MC2_RSV_PG << 1 | MC2_RMW_PAR)
- cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
- bne notK2
- /* clear Kahlua2 reserved bits */
- LOADPTR (r3, 0xfffcffff)
- and r4, r4, r3
-notK2:
- stwbrx r4,0,r6
-
- /*------- MCCR3 */
-
-#define MC_BSTOPRE 0x079 /* 0-0x7ff */
-
-#define MC3_BSTOPRE_U (MC_BSTOPRE >> 4 & 0xf)
-#define MC3_REFREC 8 /* 0-15 */
-#define MC3_RDLAT (4+MC_ECC) /* 0-15 */
-#define MC3_CPX 0 /* 0-1 */
-#define MC3_RAS6P 0 /* 0-15 */
-#define MC3_CAS5 0 /* 0-7 */
-#define MC3_CP4 0 /* 0-7 */
-#define MC3_CAS3 0 /* 0-7 */
-#define MC3_RCD2 0 /* 0-7 */
-#define MC3_RP1 0 /* 0-7 */
-
- LOADPTR (r3, MEM_CONT3_ADR) /* Set MCCR3 (F8) */
- stwbrx r3,0,r5
- LOADPTR(r4, \
- MC3_BSTOPRE_U << 28 | MC3_REFREC << 24 | \
- MC3_RDLAT << 20 | MC3_CPX << 19 | \
- MC3_RAS6P << 15 | MC3_CAS5 << 12 | MC3_CP4 << 9 | \
- MC3_CAS3 << 6 | MC3_RCD2 << 3 | MC3_RP1)
- cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
- bne notK2b
- /* clear Kahlua2 reserved bits */
- LOADPTR (r3, 0xff000000)
- and r4, r4, r3
-notK2b:
- stwbrx r4,0,r6
-
- /*------- MCCR4 */
-
-#define MC4_PRETOACT 3 /* 0-15 */
-#define MC4_ACTOPRE 5 /* 0-15 */
-#define MC4_WMODE 0 /* 0-1 */
-#define MC4_INLINE MC_ECC /* 0-1 */
-#define MC4_REGISTERED (1-MC_ECC) /* 0-1 */
-#define MC4_BSTOPRE_UU (MC_BSTOPRE >> 8 & 3)
-#define MC4_REGDIMM 0 /* 0-1 */
-#define MC4_SDMODE_CAS 2 /* 0-7 */
-#define MC4_DBUS_RCS1 1 /* 0-1, 8-bit */
-#define MC4_SDMODE_WRAP 0 /* 0-1 */
-#define MC4_SDMODE_BURST 2 /* 0-7 */
-#define MC4_ACTORW 3 /* 0-15 */
-#define MC4_BSTOPRE_L (MC_BSTOPRE & 0xf)
-
- LOADPTR (r3, MEM_CONT4_ADR) /* Set MCCR4 (FC) */
- stwbrx r3,0,r5
- LOADPTR(r4, \
- MC4_PRETOACT << 28 | MC4_ACTOPRE << 24 | \
- MC4_WMODE << 23 | MC4_INLINE << 22 | \
- MC4_REGISTERED << 20 | MC4_BSTOPRE_UU << 18 | \
- MC4_DBUS_RCS1 << 17 | \
- MC4_REGDIMM << 15 | MC4_SDMODE_CAS << 12 | \
- MC4_SDMODE_WRAP << 11 | MC4_SDMODE_BURST << 8 | \
- MC4_ACTORW << 4 | MC4_BSTOPRE_L)
- cmpl 0, 0, r7, r9 /* Check for Kahlua 2 */
- bne notK2c
- /* Turn on Kahlua2 extended ROM space */
- LOADPTR (r3, 0x00200000)
- or r4, r4, r3
-notK2c:
- stwbrx r4,0,r6
-
-#ifdef INCLUDE_ECC
- /*------- MEM_ERREN1 */
-
- LOADPTR (r3, MEM_ERREN1_ADR) /* Set MEM_ERREN1 (c0) */
- stwbrx r3,0,r5
- lwbrx r4,0,r6
- ori r4,r4,4 /* Set MEM_PERR_EN */
- stwbrx r4,0,r6
-#endif /* INCLUDE_ECC */
-
- /*------- MSAR/MEAR */
-
- LOADPTR (r3, MEM_START1_ADR) /* Set MSAR1 (80) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0xc0804000)
- stwbrx r4,0,r6
-
- LOADPTR (r3, MEM_START2_ADR) /* Set MSAR2 (84) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0xc0804000)
- stwbrx r4,0,r6
-
- LOADPTR (r3, XMEM_START1_ADR) /* Set MESAR1 (88) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0x00000000)
- stwbrx r4,0,r6
-
- LOADPTR (r3, XMEM_START2_ADR) /* Set MESAR2 (8c) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0x01010101)
- stwbrx r4,0,r6
-
- LOADPTR (r3, MEM_END1_ADR) /* Set MEAR1 (90) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0xffbf7f3f)
- stwbrx r4,0,r6
-
- LOADPTR (r3, MEM_END2_ADR) /* Set MEAR2 (94) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0xffbf7f3f)
- stwbrx r4,0,r6
-
- LOADPTR (r3, XMEM_END1_ADR) /* MEEAR1 (98) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0x00000000)
- stwbrx r4,0,r6
-
- LOADPTR (r3, XMEM_END2_ADR) /* MEEAR2 (9c) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0x01010101)
- stwbrx r4,0,r6
-
- /*-------ODCR */
-
- LOADPTR (r3, ODCR_ADR_X) /* Set ODCR */
- stwbrx r3,0,r5
-
- li r4, 0x7f
- stb r4, ODCR_SHIFT(r6) /* ODCR is at +3 offset */
-
- /*-------MBEN */
-
- LOADPTR (r3, MEM_EN_ADR) /* Set MBEN (a0) */
- stwbrx r3,0,r5
- li r4, 0x01 /* Enable bank 0 */
- stb r4, 0(r6) /* MBEN is at +0 offset */
-
-#if 0 /* Jimmy: I think page made is broken */
- /*-------PGMAX */
-
- LOADPTR (r3, MPM_ADR_X)
- stwbrx r3,0,r5
- li r4, 0x32
- stb r4, MPM_SHIFT(r6) /* PAGE_MODE is at +3 offset */
-#endif
-
- /* Wait before initializing other registers */
-
- lis r4,0x0001
- mtctr r4
-
-KahluaX4wait200us:
- bdnz KahluaX4wait200us
-
- /* Set MEMGO bit */
-
- LOADPTR (r3, MEM_CONT1_ADR) /* MCCR1 (F0) |= PGMAX */
- stwbrx r3,0,r5
- lwbrx r4,0,r6 /* old MCCR1 */
- oris r4,r4,0x0008 /* MEMGO=1 */
- stwbrx r4, 0, r6
-
- /* Wait again */
-
- addis r4,r0,0x0002
- ori r4,r4,0xffff
-
- mtctr r4
-
-KahluaX4wait8ref:
- bdnz KahluaX4wait8ref
-
- sync
- eieio
- mtlr r11
- blr
-
-#else /* USE_V2_INIT */
-
-
-/* U-Boot works, but memory will not run reliably for all address ranges.
- * Early U-Boot Working init, but 2.4.19 kernel will crash since memory is not
- * initialized correctly. Could work if debugged.
- */
-/* PCI Support routines */
-
- .globl __pci_config_read_32
-__pci_config_read_32:
- lis r4, 0xfec0
- stwbrx r3, r0, r4
- sync
- lis r4, 0xfee0
- lwbrx r3, 0, r4
- blr
- .globl __pci_config_read_16
-__pci_config_read_16:
- lis r4, 0xfec0
- andi. r5, r3, 2
- stwbrx r3, r0, r4
- sync
- oris r4, r5, 0xfee0
- lhbrx r3, r0, r4
- blr
- .globl __pci_config_read_8
-__pci_config_read_8:
- lis r4, 0xfec0
- andi. r5, r3, 3
- stwbrx r3, r0, r4
- sync
- oris r4, r5, 0xfee0
- lbz r3, 0(4)
- blr
- .globl __pci_config_write_32
-__pci_config_write_32:
- lis r5, 0xfec0
- stwbrx r3, r0, r5
- sync
- lis r5, 0xfee0
- stwbrx r4, r0, r5
- sync
- blr
- .globl __pci_config_write_16
-__pci_config_write_16:
- lis r5, 0xfec0
- andi. r6, r3, 2
- stwbrx r3, r0, 5
- sync
- oris r5, r6, 0xfee0
- sthbrx r4, r0, r5
- sync
- blr
- .globl __pci_config_write_8
-__pci_config_write_8:
- lis r5, 0xfec0
- andi. r6, r3, 3
- stwbrx r3, r0, r5
- sync
- oris r5, r6, 0xfee0
- stb r4, 0(r5)
- sync
- blr
- .globl in_8
-in_8:
- oris r3, r3, 0xfe00
- lbz r3,0(r3)
- blr
- .globl in_16
-in_16:
- oris r3, r3, 0xfe00
- lhbrx r3, 0, r3
- blr
- .globl in_16_ne
-in_16_ne:
- oris r3, r3, 0xfe00
- lhzx r3, 0, r3
- blr
- .globl in_32
-in_32:
- oris r3, r3, 0xfe00
- lwbrx r3, 0, r3
- blr
- .globl out_8
-out_8:
- oris r3, r3, 0xfe00
- stb r4, 0(r3)
- eieio
- blr
- .globl out_16
-out_16:
- oris r3, r3, 0xfe00
- sthbrx r4, 0, r3
- eieio
- blr
- .globl out_16_ne
-out_16_ne:
- oris r3, r3, 0xfe00
- sth r4, 0(r3)
- eieio
- blr
- .globl out_32
-out_32:
- oris r3, r3, 0xfe00
- stwbrx r4, 0, r3
- eieio
- blr
- .globl read_8
-read_8:
- lbz r3,0(r3)
- blr
- .globl read_16
-read_16:
- lhbrx r3, 0, r3
- blr
- .globl read_32
-read_32:
- lwbrx r3, 0, r3
- blr
- .globl read_32_ne
-read_32_ne:
- lwz r3, 0(r3)
- blr
- .globl write_8
-write_8:
- stb r4, 0(r3)
- eieio
- blr
- .globl write_16
-write_16:
- sthbrx r4, 0, r3
- eieio
- blr
- .globl write_32
-write_32:
- stwbrx r4, 0, r3
- eieio
- blr
- .globl write_32_ne
-write_32_ne:
- stw r4, 0(r3)
- eieio
- blr
-
-
-.globl early_init_f
-
-early_init_f:
- mflr r11
- lis r10, 0x8000
-
- /* PCI Latency Timer */
- li r4, 0x0d
- ori r3, r10, PLTR@l
- bl __pci_config_write_8
-
- /* Cache Line Size */
- li r4, 0x08
- ori r3, r10, PCLSR@l
- bl __pci_config_write_8
-
- /* PCI Cmd */
- li r4, 6
- ori r3, r10, PCICR@l
- bl __pci_config_write_16
-
-#if 1
- /* PCI Stat */
- ori r3, r10, PCISR@l
- bl __pci_config_read_16
- ori r4, r4, 0xffff
- ori r3, r10, PCISR@l
- bl __pci_config_write_16
-#endif
-
- /* PICR1 */
- lis r4, 0xff14
- ori r4, r4, 0x1b98
- ori r3, r10, PICR1@l
- bl __pci_config_write_32
-
-
- /* PICR2 */
- lis r4, 0x0404
- ori r4, r4, 0x0004
- ori r3, r10, PICR2@l
- bl __pci_config_write_32
-
- /* MIOCR1 */
- li r4, 0x04
- ori r3, r10, MIOCR1@l
- bl __pci_config_write_8
-
- /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
- /* SDRAM_CLK_DEL (0x77)*/
- li r4, 0x10
- ori r3, r10, MIOCR2@l
- bl __pci_config_write_8
-
- /* EUMBBAR */
- lis r4, 0xfc00
- ori r3, r10, EUMBBAR@l
- bl __pci_config_write_32
-
- /* AMBOR */
-
- /* Even if Address Map B is not being used (though it should),
- * the memory DLL needs to be cleared/set/cleared before using memory.
- */
-
- ori r3, r10, AMBOR@l
- bl __pci_config_read_8 /* get Current bits */
-
- andi. r4, r4, 0xffdf
- ori r3, r10, AMBOR@l
- bl __pci_config_write_16 /* Clear DLL_RESET */
-
- ori r4, r4, 0x0020
- ori r3, r10, AMBOR@l
- bl __pci_config_write_16 /* Set DLL_RESET */
-
- andi. r4, r4, 0xffdf
- ori r3, r10, AMBOR@l
- bl __pci_config_write_16 /* Clear DLL_RESET */
-
- /* ERCR1 */
- lis r4, 0x8040 /* Enable RCS2, use supplied timings */
- ori r4, r4, 0x8000
- ori r3, r10, ERCR1@l
- bl __pci_config_write_32
-
- /* ERCR2 */
- lis r4, 0x0000 /* Disable RCS3 parms */
- ori r4, r4, 0x0000
- ori r3, r10, ERCR2@l
- bl __pci_config_write_32
-
- /* ERCR3 */
- lis r4, 0x0000 /* RCS3 at 0x70000000, 64K bytes */
- ori r4, r4, 0x0004
- ori r3, r10, ERCR2@l
- bl __pci_config_write_32
-
- /* Preserve memgo bit */
- /* MCCR1 */
-
-/* lis r4, 0x75a8 / Safe Local ROM = 11+3 clocks */
- lis r4, 0x75a0 /* Safe Local ROM = 11+3 clocks */
-/* lis r4, 0x73a0 / Fast Local ROM = 7+3 clocks */
-/* oris r4, r4, 0x0010 / Burst ROM/Flash enable */
-/* oris r4, r4, 0x0004 / Self-refresh enable */
-
-/* ori r4,r4,0xFFFF / 16Mbit 2bank SDRAM */
-/* ori r4,r4,0xAAAA / 256Mbit 4bank SDRAM (8245 only) */
-/* ori r4,r4,0x5555 / 64Mbit 2bank SDRAM */
- ori r4,r4,0x0000 /* 64Mbit 4bank SDRAM */
-
- ori r3, r10, MCCR1@l
- bl __pci_config_write_32
-
- /* MCCR2 */
-
- lis r4,0x0000
-/* oris r4,r4,0x4000 / TS_WAIT_TIMER = 3 clocks */
- oris r4,r4,0x1000 /* ASRISE = 8 clocks */
- oris r4,r4,0x0080 /* ASFALL = 8 clocks */
-/* oris r4,r4,0x0010 / SDRAM Parity (else ECC) */
-/* oris r4,r4,0x0008 / Write parity check */
-/* oris r4,r4,0x0004 / SDRAM inline reads */
-
-
-/* Select a refresh rate; it needs to match the bus speed; if too */
-/* slow, data may be lost; if too fast, performance is lost. We */
-/* use the fastest value so we run at all speeds. */
-/* Refresh = (15600ns/busclk) - (213 (see UM)). */
-
-/* ori r4,r4,0x1d2c / 133 MHz mem bus = 1867 */
-/* ori r4,r4,0x150c / 100 MHz mem bus = 1347 */
-/* ori r4,r4,0x10fc / 83 MHz mem bus = 1087 */
-/* ori r4,r4,0x0cc4 / 66 MHz mem bus = 817 */
- ori r4,r4,0x04cc /* 33 MHz mem bus (SAFE) = 307 */
-/* ori r4,r4,0x0002 / Reserve a page */
-/* ori r4,r4,0x0001 / RWM parity */
-
- ori r3, r10, MCCR2@l
- bl __pci_config_write_32
-
-
- /* MCCR3 */
- lis r4,0x0000 /* BSTOPRE_M = 7 (see A/N) */
- oris r4,r4,0x0500 /* REFREC = 8 clocks */
- ori r3, r10, MCCR3@l
- bl __pci_config_write_32
-
- /* MCCR4 */ /* Turn on registered buffer mode */
- lis r4, 0x2000 /* PRETOACT = 3 clocks */
- oris r4,r4,0x0400 /* ACTOPRE = 5 clocks */
-/* oris r4,r4,0x0080 / Enable 8-beat burst (32-bit bus) */
-/* oris r4,r4,0x0040 / Enable Inline ECC/Parity */
- oris r4,r4,0x0020 /* EXTROM enabled */
- oris r4,r4,0x0010 /* Registered buffers */
-/* oris r4,r4,0x0000 / BSTOPRE_U = 0 (see A/N) */
- oris r4,r4,0x0002 /* DBUS_SIZ[2] (8 bit on RCS1) */
-
-/* ori r4,r4,0x8000 / Registered DIMMs */
- ori r4,r4,0x2000 /*CAS Latency (CL=3) (see RDLAT) */
-/* ori r4,r4,0x2000 / CAS Latency (CL=2) (see RDLAT) */
-/* ori r4,r4,0x0300 / Sequential wrap/8-beat burst */
- ori r4,r4,0x0200 /* Sequential wrap/4-beat burst */
- ori r4,r4,0x0030 /* ACTORW = 3 clocks */
- ori r4,r4,0x0009 /* BSTOPRE_L = 9 (see A/N) */
-
- ori r3, r10, MCCR4@l
- bl __pci_config_write_32
-
- /* MSAR1 */
- lis r4, 0xc0804000@h
- ori r4, r4, 0xc0804000@l
- ori r3, r10, MSAR1@l
- bl __pci_config_write_32
-
- /* MSAR2 */
- lis r4, 0xc0804000@h
- ori r4, r4, 0xc0804000@l
- ori r3, r10, MSAR2@l
- bl __pci_config_write_32
-
- /* MESAR1 */
- lis r4, 0x00000000@h
- ori r4, r4, 0x00000000@l
- ori r3, r10, EMSAR1@l
- bl __pci_config_write_32
-
- /* MESAR2 */
- lis r4, 0x01010101@h
- ori r4, r4, 0x01010101@l
- ori r3, r10, EMSAR2@l
- bl __pci_config_write_32
-
- /* MEAR1 */
- lis r4, 0xffbf7f3f@h
- ori r4, r4, 0xffbf7f3f@l
- ori r3, r10, MEAR1@l
- bl __pci_config_write_32
-
- /* MEAR2 */
- lis r4, 0xffbf7f3f@h
- ori r4, r4, 0xffbf7f3f@l
- ori r3, r10, MEAR2@l
- bl __pci_config_write_32
-
- /* MEEAR1 */
- lis r4, 0x00000000@h
- ori r4, r4, 0x00000000@l
- ori r3, r10, EMEAR1@l
- bl __pci_config_write_32
-
- /* MEEAR2 */
- lis r4, 0x01010101@h
- ori r4, r4, 0x01010101@l
- ori r3, r10, EMEAR2@l
- bl __pci_config_write_32
-
- /* ODCR */
- li r4, 0x7f
- ori r3, r10, ODCR@l
- bl __pci_config_write_8
-
- /* MBER */
- li r4, 0x01
- ori r3, r10, MBER@l
- bl __pci_config_write_8
-
- /* Page CTR aka PGMAX */
- li r4, 0x32
- ori r3, r10, 0x70
- bl __pci_config_write_8
-
-#if 0
- /* CLK Drive */
- ori r4, r10, 0xfc01 /* Top bit will be ignored */
- ori r3, r10, 0x74
- bl __pci_config_write_16
-#endif
-
- /* delay */
- lis r7, 1
- mtctr r7
-label1: bdnz label1
-
- /* Set memgo bit */
- /* MCCR1 */
- ori r3, r10, MCCR1@l
- bl __pci_config_read_32
- lis r7, 0x0008
- or r4, r3, r7
- ori r3, r10, MCCR1@l
- bl __pci_config_write_32
-
- /* delay again */
- lis r7, 1
- mtctr r7
-label2: bdnz label2
-#if 0
-/* DEBUG: Infinite loop, write then read */
-loop:
- lis r7, 0xffff
- mtctr r7
- li r3, 0x5004
- lis r4, 0xa0a0
- ori r4, r4, 0x5050
- bl write_32_ne
- li r3, 0x5004
- bl read_32_ne
- bdnz loop
-#endif
- mtlr r11
- blr
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <asm/pci_io.h>
-
-#define ROM_CS0_START 0xFF800000
-#define ROM_CS1_START 0xFF000000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data);
-
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t * info);
-#endif /* 0 */
-
-/*flash command address offsets*/
-
-#if 0
-#define ADDR0 (0x555)
-#define ADDR1 (0x2AA)
-#define ADDR3 (0x001)
-#else
-#define ADDR0 (0xAAA)
-#define ADDR1 (0x555)
-#define ADDR3 (0x001)
-#endif
-
-#define FLASH_WORD_SIZE unsigned char
-
-/*-----------------------------------------------------------------------
- */
-
-#if 0
-static int byte_parity_odd (unsigned char x) __attribute__ ((const));
-#endif /* 0 */
-static unsigned long flash_id (unsigned char mfct, unsigned char chip)
- __attribute__ ((const));
-
-typedef struct {
- FLASH_WORD_SIZE extval;
- unsigned short intval;
-} map_entry;
-
-#if 0
-static int byte_parity_odd (unsigned char x)
-{
- x ^= x >> 4;
- x ^= x >> 2;
- x ^= x >> 1;
- return (x & 0x1) != 0;
-}
-#endif /* 0 */
-
-
-static unsigned long flash_id (unsigned char mfct, unsigned char chip)
-{
- static const map_entry mfct_map[] = {
- {(FLASH_WORD_SIZE) AMD_MANUFACT,
- (unsigned short) ((unsigned long) FLASH_MAN_AMD >> 16)},
- {(FLASH_WORD_SIZE) FUJ_MANUFACT,
- (unsigned short) ((unsigned long) FLASH_MAN_FUJ >> 16)},
- {(FLASH_WORD_SIZE) STM_MANUFACT,
- (unsigned short) ((unsigned long) FLASH_MAN_STM >> 16)},
- {(FLASH_WORD_SIZE) MT_MANUFACT,
- (unsigned short) ((unsigned long) FLASH_MAN_MT >> 16)},
- {(FLASH_WORD_SIZE) INTEL_MANUFACT,
- (unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)},
- {(FLASH_WORD_SIZE) INTEL_ALT_MANU,
- (unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)}
- };
-
- static const map_entry chip_map[] = {
- {AMD_ID_F040B, FLASH_AM040},
- {(FLASH_WORD_SIZE) STM_ID_x800AB, FLASH_STM800AB}
- };
-
- const map_entry *p;
- unsigned long result = FLASH_UNKNOWN;
-
- /* find chip id */
- for (p = &chip_map[0];
- p < &chip_map[sizeof chip_map / sizeof chip_map[0]]; p++)
- if (p->extval == chip) {
- result = FLASH_VENDMASK | p->intval;
- break;
- }
-
- /* find vendor id */
- for (p = &mfct_map[0];
- p < &mfct_map[sizeof mfct_map / sizeof mfct_map[0]]; p++)
- if (p->extval == mfct) {
- result &= ~FLASH_VENDMASK;
- result |= (unsigned long) p->intval << 16;
- break;
- }
-
- return result;
-}
-
-
-unsigned long flash_init (void)
-{
- unsigned long i;
- unsigned char j;
- static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- flash_info_t *const pflinfo = &flash_info[i];
-
- pflinfo->flash_id = FLASH_UNKNOWN;
- pflinfo->size = 0;
- pflinfo->sector_count = 0;
- }
-
- for (i = 0; i < sizeof flash_banks / sizeof flash_banks[0]; i++) {
- flash_info_t *const pflinfo = &flash_info[i];
- const unsigned long base_address = flash_banks[i];
- volatile FLASH_WORD_SIZE *const flash =
- (FLASH_WORD_SIZE *) base_address;
-#if 0
- volatile FLASH_WORD_SIZE *addr2;
-#endif
-#if 0
- /* write autoselect sequence */
- flash[0x5555] = 0xaa;
- flash[0x2aaa] = 0x55;
- flash[0x5555] = 0x90;
-#else
- flash[0xAAA << (3 * i)] = 0xaa;
- flash[0x555 << (3 * i)] = 0x55;
- flash[0xAAA << (3 * i)] = 0x90;
-#endif
- __asm__ __volatile__ ("sync");
-
-#if 0
- pflinfo->flash_id = flash_id (flash[0x0], flash[0x1]);
-#else
- pflinfo->flash_id =
- flash_id (flash[0x0], flash[0x2 + 14 * i]);
-#endif
-
- switch (pflinfo->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040:
- pflinfo->size = 0x00080000;
- pflinfo->sector_count = 8;
- for (j = 0; j < 8; j++) {
- pflinfo->start[j] =
- base_address + 0x00010000 * j;
- pflinfo->protect[j] = flash[(j << 16) | 0x2];
- }
- break;
- case FLASH_STM800AB:
- pflinfo->size = 0x00100000;
- pflinfo->sector_count = 19;
- pflinfo->start[0] = base_address;
- pflinfo->start[1] = base_address + 0x4000;
- pflinfo->start[2] = base_address + 0x6000;
- pflinfo->start[3] = base_address + 0x8000;
- for (j = 1; j < 16; j++) {
- pflinfo->start[j + 3] =
- base_address + 0x00010000 * j;
- }
-#if 0
- /* check for protected sectors */
- for (j = 0; j < pflinfo->sector_count; j++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile FLASH_WORD_SIZE
- *) (pflinfo->start[j]);
- if (pflinfo->flash_id & FLASH_MAN_SST)
- pflinfo->protect[j] = 0;
- else
- pflinfo->protect[j] = addr2[2] & 1;
- }
-#endif
- break;
- }
- /* Protect monitor and environment sectors
- */
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[0]);
-#endif
-
- /* reset device to read mode */
- flash[0x0000] = 0xf0;
- __asm__ __volatile__ ("sync");
- }
-
- return flash_info[0].size + flash_info[1].size;
-}
-
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- int i;
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_MAN_SST) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-
-}
-#endif /* 0 */
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- static const char unk[] = "Unknown";
- const char *mfct = unk, *type = unk;
- unsigned int i;
-
- if (info->flash_id != FLASH_UNKNOWN) {
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- mfct = "AMD";
- break;
- case FLASH_MAN_FUJ:
- mfct = "FUJITSU";
- break;
- case FLASH_MAN_STM:
- mfct = "STM";
- break;
- case FLASH_MAN_SST:
- mfct = "SST";
- break;
- case FLASH_MAN_BM:
- mfct = "Bright Microelectonics";
- break;
- case FLASH_MAN_INTEL:
- mfct = "Intel";
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040:
- type = "AM29F040B (512K * 8, uniform sector size)";
- break;
- case FLASH_AM400B:
- type = "AM29LV400B (4 Mbit, bottom boot sect)";
- break;
- case FLASH_AM400T:
- type = "AM29LV400T (4 Mbit, top boot sector)";
- break;
- case FLASH_AM800B:
- type = "AM29LV800B (8 Mbit, bottom boot sect)";
- break;
- case FLASH_AM800T:
- type = "AM29LV800T (8 Mbit, top boot sector)";
- break;
- case FLASH_AM160T:
- type = "AM29LV160T (16 Mbit, top boot sector)";
- break;
- case FLASH_AM320B:
- type = "AM29LV320B (32 Mbit, bottom boot sect)";
- break;
- case FLASH_AM320T:
- type = "AM29LV320T (32 Mbit, top boot sector)";
- break;
- case FLASH_STM800AB:
- type = "M29W800AB (8 Mbit, bottom boot sect)";
- break;
- case FLASH_SST800A:
- type = "SST39LF/VF800 (8 Mbit, uniform sector size)";
- break;
- case FLASH_SST160A:
- type = "SST39LF/VF160 (16 Mbit, uniform sector size)";
- break;
- }
- }
-
- printf ("\n Brand: %s Type: %s\n"
- " Size: %lu KB in %d Sectors\n",
- mfct, type, info->size >> 10, info->sector_count);
-
- printf (" Sector Start Addresses:");
-
- for (i = 0; i < info->sector_count; i++) {
- unsigned long size;
- unsigned int erased;
- unsigned long *flash = (unsigned long *) info->start[i];
-
- /*
- * Check if whole sector is erased
- */
- size = (i != (info->sector_count - 1)) ?
- (info->start[i + 1] - info->start[i]) >> 2 :
- (info->start[0] + info->size - info->start[i]) >> 2;
-
- for (flash = (unsigned long *) info->start[i], erased = 1;
- (flash != (unsigned long *) info->start[i] + size)
- && erased; flash++)
- erased = *flash == ~0x0UL;
-
- printf ("%s %08lX %s %s",
- (i % 5) ? "" : "\n ",
- info->start[i],
- erased ? "E" : " ", info->protect[i] ? "RO" : " ");
- }
-
- puts ("\n");
- return;
-}
-
-#if 0
-
-/*
- * The following code cannot be run from FLASH!
- */
-ulong flash_get_size (vu_long * addr, flash_info_t * info)
-{
- short i;
- FLASH_WORD_SIZE value;
- ulong base = (ulong) addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
-
- printf ("flash_get_size: \n");
- /* Write auto select command: read Manufacturer ID */
- eieio ();
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0xAA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x55;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x90;
- value = addr2[0];
-
- switch (value) {
- case (FLASH_WORD_SIZE) AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FLASH_WORD_SIZE) FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (FLASH_WORD_SIZE) SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
- printf ("recognised manufacturer");
-
- value = addr2[ADDR3]; /* device ID */
- debug ("\ndev_code=%x\n", value);
-
- switch (value) {
- case (FLASH_WORD_SIZE) AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE) SST_ID_xF800A:
- info->flash_id += FLASH_SST800A;
- info->sector_count = 16;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE) SST_ID_xF160A:
- info->flash_id += FLASH_SST160A;
- info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- printf ("flash id %lx; sector count %x, size %lx\n", info->flash_id,
- info->sector_count, info->size);
- /* set up sector start address table */
- if (info->flash_id & FLASH_MAN_SST) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
- if (info->flash_id & FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr2 = (FLASH_WORD_SIZE *) info->start[0];
- *addr2 = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
- }
-
- return (info->size);
-}
-
-#endif
-
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
- unsigned char sh8b;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Check the ROM CS */
- if ((info->start[0] >= ROM_CS1_START)
- && (info->start[0] < ROM_CS0_START))
- sh8b = 3;
- else
- sh8b = 0;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info->
- start
- [sect]
- -
- info->
- start
- [0]) <<
- sh8b));
- if (info->flash_id & FLASH_MAN_SST) {
- addr[ADDR0 << sh8b] =
- (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1 << sh8b] =
- (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0 << sh8b] =
- (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0 << sh8b] =
- (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1 << sh8b] =
- (FLASH_WORD_SIZE) 0x00550055;
- addr[0] = (FLASH_WORD_SIZE) 0x00500050; /* block erase */
- udelay (30000); /* wait 30 ms */
- } else
- addr[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info->start[l_sect] -
- info->
- start[0]) << sh8b));
- while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
- (FLASH_WORD_SIZE) 0x00800080) {
- if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
- }
- }
-
- DONE:
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *) info->start[0];
- addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i = 0; i < 4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_word (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) info->start[0];
- volatile FLASH_WORD_SIZE *dest2;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
- ulong start;
- int flag;
- int i;
- unsigned char sh8b;
-
- /* Check the ROM CS */
- if ((info->start[0] >= ROM_CS1_START)
- && (info->start[0] < ROM_CS0_START))
- sh8b = 3;
- else
- sh8b = 0;
-
- dest2 = (FLASH_WORD_SIZE *) (((dest - info->start[0]) << sh8b) +
- info->start[0]);
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest2 & (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
- addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00A000A0;
-
- dest2[i << sh8b] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i << sh8b] & (FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
+++ /dev/null
-/*
- * SGS M48-T59Y TOD/NVRAM Driver
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp.
- *
- * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * SGS M48-T59Y TOD/NVRAM Driver
- *
- * The SGS M48 an 8K NVRAM starting at offset M48_BASE_ADDR and
- * continuing for 8176 bytes. After that starts the Time-Of-Day (TOD)
- * registers which are used to set/get the internal date/time functions.
- *
- * This module implements Y2K compliance by taking full year numbers
- * and translating back and forth from the TOD 2-digit year.
- *
- * NOTE: for proper interaction with an operating system, the TOD should
- * be used to store Universal Coordinated Time (GMT) and timezone
- * conversions should be used.
- *
- * Here is a diagram of the memory layout:
- *
- * +---------------------------------------------+ 0xffe0a000
- * | Non-volatile memory | .
- * | | .
- * | (8176 bytes of Non-volatile memory) | .
- * | | .
- * +---------------------------------------------+ 0xffe0bff0
- * | Flags |
- * +---------------------------------------------+ 0xffe0bff1
- * | Unused |
- * +---------------------------------------------+ 0xffe0bff2
- * | Alarm Seconds |
- * +---------------------------------------------+ 0xffe0bff3
- * | Alarm Minutes |
- * +---------------------------------------------+ 0xffe0bff4
- * | Alarm Date |
- * +---------------------------------------------+ 0xffe0bff5
- * | Interrupts |
- * +---------------------------------------------+ 0xffe0bff6
- * | WatchDog |
- * +---------------------------------------------+ 0xffe0bff7
- * | Calibration |
- * +---------------------------------------------+ 0xffe0bff8
- * | Seconds |
- * +---------------------------------------------+ 0xffe0bff9
- * | Minutes |
- * +---------------------------------------------+ 0xffe0bffa
- * | Hours |
- * +---------------------------------------------+ 0xffe0bffb
- * | Day |
- * +---------------------------------------------+ 0xffe0bffc
- * | Date |
- * +---------------------------------------------+ 0xffe0bffd
- * | Month |
- * +---------------------------------------------+ 0xffe0bffe
- * | Year (2 digits only) |
- * +---------------------------------------------+ 0xffe0bfff
- */
-#include <common.h>
-#include <rtc.h>
-#include "bmw.h"
-
-/*
- * Imported from mousse.h:
- *
- * TOD_REG_BASE Base of m48t59y TOD registers
- * SYS_TOD_UNPROTECT() Disable NVRAM write protect
- * SYS_TOD_PROTECT() Re-enable NVRAM write protect
- */
-
-#define YEAR 0xf
-#define MONTH 0xe
-#define DAY 0xd
-#define DAY_OF_WEEK 0xc
-#define HOUR 0xb
-#define MINUTE 0xa
-#define SECOND 0x9
-#define CONTROL 0x8
-#define WATCH 0x7
-#define INTCTL 0x6
-#define WD_DATE 0x5
-#define WD_HOUR 0x4
-#define WD_MIN 0x3
-#define WD_SEC 0x2
-#define _UNUSED 0x1
-#define FLAGS 0x0
-
-#define M48_ADDR ((volatile unsigned char *) TOD_REG_BASE)
-
-int m48_tod_init(void)
-{
- SYS_TOD_UNPROTECT();
-
- M48_ADDR[CONTROL] = 0;
- M48_ADDR[WATCH] = 0;
- M48_ADDR[INTCTL] = 0;
-
- /*
- * If the oscillator is currently stopped (as on a new part shipped
- * from the factory), start it running.
- *
- * Here is an example of the TOD bytes on a brand new M48T59Y part:
- * 00 00 00 00 00 00 00 00 00 88 8c c3 bf c8 f5 01
- */
-
- if (M48_ADDR[SECOND] & 0x80)
- M48_ADDR[SECOND] = 0;
-
- /* Is battery low */
- if ( M48_ADDR[FLAGS] & 0x10) {
- printf("NOTICE: Battery low on Real-Time Clock (replace SNAPHAT).\n");
- }
-
- SYS_TOD_PROTECT();
-
- return 0;
-}
-
-/*
- * m48_tod_set
- */
-
-static int to_bcd(int value)
-{
- return value / 10 * 16 + value % 10;
-}
-
-static int from_bcd(int value)
-{
- return value / 16 * 10 + value % 16;
-}
-
-static int day_of_week(int y, int m, int d) /* 0-6 ==> Sun-Sat */
-{
- static int t[] = {0, 3, 2, 5, 0, 3, 5, 1, 4, 6, 2, 4};
- y -= m < 3;
- return (y + y/4 - y/100 + y/400 + t[m-1] + d) % 7;
-}
-
-/*
- * Note: the TOD should store the current GMT
- */
-
-int m48_tod_set(int year, /* 1980-2079 */
- int month, /* 01-12 */
- int day, /* 01-31 */
- int hour, /* 00-23 */
- int minute, /* 00-59 */
- int second) /* 00-59 */
-
-{
- SYS_TOD_UNPROTECT();
-
- M48_ADDR[CONTROL] |= 0x80; /* Set WRITE bit */
-
- M48_ADDR[YEAR] = to_bcd(year % 100);
- M48_ADDR[MONTH] = to_bcd(month);
- M48_ADDR[DAY] = to_bcd(day);
- M48_ADDR[DAY_OF_WEEK] = day_of_week(year, month, day) + 1;
- M48_ADDR[HOUR] = to_bcd(hour);
- M48_ADDR[MINUTE] = to_bcd(minute);
- M48_ADDR[SECOND] = to_bcd(second);
-
- M48_ADDR[CONTROL] &= ~0x80; /* Clear WRITE bit */
-
- SYS_TOD_PROTECT();
-
- return 0;
-}
-
-/*
- * Note: the TOD should store the current GMT
- */
-
-int m48_tod_get(int *year, /* 1980-2079 */
- int *month, /* 01-12 */
- int *day, /* 01-31 */
- int *hour, /* 00-23 */
- int *minute, /* 00-59 */
- int *second) /* 00-59 */
-{
- int y;
-
- SYS_TOD_UNPROTECT();
-
- M48_ADDR[CONTROL] |= 0x40; /* Set READ bit */
-
- y = from_bcd(M48_ADDR[YEAR]);
- *year = y < 80 ? 2000 + y : 1900 + y;
- *month = from_bcd(M48_ADDR[MONTH]);
- *day = from_bcd(M48_ADDR[DAY]);
- /* day_of_week = M48_ADDR[DAY_OF_WEEK] & 0xf; */
- *hour = from_bcd(M48_ADDR[HOUR]);
- *minute = from_bcd(M48_ADDR[MINUTE]);
- *second = from_bcd(M48_ADDR[SECOND] & 0x7f);
-
- M48_ADDR[CONTROL] &= ~0x40; /* Clear READ bit */
-
- SYS_TOD_PROTECT();
-
- return 0;
-}
-
-int m48_tod_get_second(void)
-{
- return from_bcd(M48_ADDR[SECOND] & 0x7f);
-}
-
-/*
- * Watchdog function
- *
- * If usec is 0, the watchdog timer is disarmed.
- *
- * If usec is non-zero, the watchdog timer is armed (or re-armed) for
- * approximately usec microseconds (if the exact requested usec is
- * not supported by the chip, the next higher available value is used).
- *
- * Minimum watchdog timeout = 62500 usec
- * Maximum watchdog timeout = 124 sec (124000000 usec)
- */
-
-void m48_watchdog_arm(int usec)
-{
- int mpy, res;
-
- SYS_TOD_UNPROTECT();
-
- if (usec == 0) {
- res = 0;
- mpy = 0;
- } else if (usec < 2000000) { /* Resolution: 1/16s if below 2s */
- res = 0;
- mpy = (usec + 62499) / 62500;
- } else if (usec < 8000000) { /* Resolution: 1/4s if below 8s */
- res = 1;
- mpy = (usec + 249999) / 250000;
- } else if (usec < 32000000) { /* Resolution: 1s if below 32s */
- res = 2;
- mpy = (usec + 999999) / 1000000;
- } else { /* Resolution: 4s up to 124s */
- res = 3;
- mpy = (usec + 3999999) / 4000000;
- if (mpy > 31)
- mpy = 31;
- }
-
- M48_ADDR[WATCH] = (0x80 | /* Steer to RST signal (IRQ = N/C) */
- mpy << 2 |
- res);
-
- SYS_TOD_PROTECT();
-}
-
-/*
- * U-Boot RTC support.
- */
-int
-rtc_get( struct rtc_time *tmp )
-{
- m48_tod_get(&tmp->tm_year,
- &tmp->tm_mon,
- &tmp->tm_mday,
- &tmp->tm_hour,
- &tmp->tm_min,
- &tmp->tm_sec);
- tmp->tm_yday = 0;
- tmp->tm_isdst= 0;
-
-#ifdef RTC_DEBUG
- printf( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
-#endif
-
- return 0;
-}
-
-int rtc_set( struct rtc_time *tmp )
-{
- m48_tod_set(tmp->tm_year, /* 1980-2079 */
- tmp->tm_mon, /* 01-12 */
- tmp->tm_mday, /* 01-31 */
- tmp->tm_hour, /* 00-23 */
- tmp->tm_min, /* 00-59 */
- tmp->tm_sec); /* 00-59 */
-
-#ifdef RTC_DEBUG
- printf( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-#endif
-
- return 0;
-}
-
-void
-rtc_reset (void)
-{
- m48_tod_init();
-}
+++ /dev/null
-/*
- * COM1 NS16550 support
- * originally from linux source (arch/powerpc/boot/ns16550.c)
- * modified to use CONFIG_SYS_ISA_MEM and new defines
- */
-
-#include <config.h>
-#include "ns16550.h"
-
-typedef struct NS16550 *NS16550_t;
-
-const NS16550_t COM_PORTS[] =
- { (NS16550_t) ((CONFIG_SYS_EUMB_ADDR) + 0x4500),
-(NS16550_t) ((CONFIG_SYS_EUMB_ADDR) + 0x4600) };
-
-volatile struct NS16550 *NS16550_init (int chan, int baud_divisor)
-{
- volatile struct NS16550 *com_port;
-
- com_port = (struct NS16550 *) COM_PORTS[chan];
- com_port->ier = 0x00;
- com_port->lcr = LCR_BKSE; /* Access baud rate */
- com_port->dll = baud_divisor & 0xff; /* 9600 baud */
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = LCR_8N1; /* 8 data, 1 stop, no parity */
- com_port->mcr = MCR_RTS; /* RTS/DTR */
- com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR; /* Clear & enable FIFOs */
- return (com_port);
-}
-
-void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor)
-{
- com_port->ier = 0x00;
- com_port->lcr = LCR_BKSE; /* Access baud rate */
- com_port->dll = baud_divisor & 0xff; /* 9600 baud */
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = LCR_8N1; /* 8 data, 1 stop, no parity */
- com_port->mcr = MCR_RTS; /* RTS/DTR */
- com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR; /* Clear & enable FIFOs */
-}
-
-void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c)
-{
- while ((com_port->lsr & LSR_THRE) == 0);
- com_port->thr = c;
-}
-
-unsigned char NS16550_getc (volatile struct NS16550 *com_port)
-{
- while ((com_port->lsr & LSR_DR) == 0);
- return (com_port->rbr);
-}
-
-int NS16550_tstc (volatile struct NS16550 *com_port)
-{
- return ((com_port->lsr & LSR_DR) != 0);
-}
+++ /dev/null
-/*
- * NS16550 Serial Port
- * originally from linux source (arch/powerpc/boot/ns16550.h)
- * modified slightly to
- * have addresses as offsets from CONFIG_SYS_ISA_BASE
- * added a few more definitions
- * added prototypes for ns16550.c
- * reduced no of com ports to 2
- * modifications (c) Rob Taylor, Flying Pig Systems. 2000.
- * further modified to support the 8245 duart
- * modifications (c) Paul Jimenez, Musenki, Inc. 2001.
- */
-
-
-struct NS16550 {
- unsigned char rbrthrdlb; /* 0 */
- unsigned char ierdmb; /* 1 */
- unsigned char iirfcrafr; /* 2 */
- unsigned char lcr; /* 3 */
- unsigned char mcr; /* 4 */
- unsigned char lsr; /* 5 */
- unsigned char msr; /* 6 */
- unsigned char scr; /* 7 */
- unsigned char reserved[2]; /* 8 & 9 */
- unsigned char dsr; /* 10 */
- unsigned char dcr; /* 11 */
-};
-
-
-#define rbr rbrthrdlb
-#define thr rbrthrdlb
-#define dll rbrthrdlb
-#define ier ierdmb
-#define dlm ierdmb
-#define iir iirfcrafr
-#define fcr iirfcrafr
-#define afr iirfcrafr
-
-#define FCR_FIFO_EN 0x01 /*fifo enable */
-#define FCR_RXSR 0x02 /*receiver soft reset */
-#define FCR_TXSR 0x04 /*transmitter soft reset */
-#define FCR_DMS 0x08 /* DMA Mode Select */
-
-#define MCR_RTS 0x02 /* Readyu to Send */
-#define MCR_LOOP 0x10 /* Local loopback mode enable */
-/* #define MCR_DTR 0x01 noton 8245 duart */
-/* #define MCR_DMA_EN 0x04 noton 8245 duart */
-/* #define MCR_TX_DFR 0x08 noton 8245 duart */
-
-#define LCR_WLS_MSK 0x03 /* character length slect mask */
-#define LCR_WLS_5 0x00 /* 5 bit character length */
-#define LCR_WLS_6 0x01 /* 6 bit character length */
-#define LCR_WLS_7 0x02 /* 7 bit character length */
-#define LCR_WLS_8 0x03 /* 8 bit character length */
-#define LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */
-#define LCR_PEN 0x08 /* Parity eneble */
-#define LCR_EPS 0x10 /* Even Parity Select */
-#define LCR_STKP 0x20 /* Stick Parity */
-#define LCR_SBRK 0x40 /* Set Break */
-#define LCR_BKSE 0x80 /* Bank select enable - aka DLAB on 8245 */
-
-#define LSR_DR 0x01 /* Data ready */
-#define LSR_OE 0x02 /* Overrun */
-#define LSR_PE 0x04 /* Parity error */
-#define LSR_FE 0x08 /* Framing error */
-#define LSR_BI 0x10 /* Break */
-#define LSR_THRE 0x20 /* Xmit holding register empty */
-#define LSR_TEMT 0x40 /* Xmitter empty */
-#define LSR_ERR 0x80 /* Error */
-
-/* useful defaults for LCR*/
-#define LCR_8N1 0x03
-
-
-volatile struct NS16550 *NS16550_init (int chan, int baud_divisor);
-void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c);
-unsigned char NS16550_getc (volatile struct NS16550 *com_port);
-int NS16550_tstc (volatile struct NS16550 *com_port);
-void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor);
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-#include "ns16550.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if CONFIG_CONS_INDEX == 1
-static struct NS16550 *console =
- (struct NS16550 *) (CONFIG_SYS_EUMB_ADDR + 0x4500);
-#elif CONFIG_CONS_INDEX == 2
-static struct NS16550 *console =
- (struct NS16550 *) (CONFIG_SYS_EUMB_ADDR + 0x4500);
-#else
-#error no valid console defined
-#endif
-
-extern ulong get_bus_freq (ulong);
-
-static int bmw_serial_init(void)
-{
- int clock_divisor = gd->bus_clk / 16 / gd->baudrate;
-
- NS16550_init (CONFIG_CONS_INDEX - 1, clock_divisor);
-
- return (0);
-}
-
-static void bmw_serial_putc(const char c)
-{
- if (c == '\n') {
- serial_putc ('\r');
- }
- NS16550_putc (console, c);
-}
-
-static void bmw_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-
-static int bmw_serial_getc(void)
-{
- return NS16550_getc (console);
-}
-
-static int bmw_serial_tstc(void)
-{
- return NS16550_tstc (console);
-}
-
-static void bmw_serial_setbrg(void)
-{
- int clock_divisor = get_bus_freq (0) / 16 / gd->baudrate;
-
- NS16550_reinit (console, clock_divisor);
-}
-
-static struct serial_device bmw_serial_drv = {
- .name = "bmw_serial",
- .start = bmw_serial_init,
- .stop = NULL,
- .setbrg = bmw_serial_setbrg,
- .putc = bmw_serial_putc,
- .puts = bmw_serial_puts,
- .getc = bmw_serial_getc,
- .tstc = bmw_serial_tstc,
-};
-
-void bmw_serial_initialize(void)
-{
- serial_register(&bmw_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &bmw_serial_drv;
-}
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-const uint sdram_table[] =
-{
- /*
- * Single Read. (Offset 0 in UPMA RAM)
- */
- 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
- 0x1FF77C47, /* last */
- /*
- * SDRAM Initialization (offset 5 in UPMA RAM)
- *
- * This is no UPM entry point. The following definition uses
- * the remaining space to establish an initialization
- * sequence, which is executed by a RUN command.
- *
- */
- 0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */
- /*
- * Burst Read. (Offset 8 in UPMA RAM)
- */
- 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
- 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Single Write. (Offset 18 in UPMA RAM)
- */
- 0x1F07FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Burst Write. (Offset 20 in UPMA RAM)
- */
- 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
- 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Refresh (Offset 30 in UPMA RAM)
- */
- 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
- 0xFFFFFC84, 0xFFFFFC07, /* last */
- _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Exception. (Offset 3c in UPMA RAM)
- */
- 0x7FFFFC07, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
- char buf[64];
- int i;
- int l = getenv_f("serial#", buf, sizeof(buf));
-
- puts ("Board: TTTech C2MON ");
-
- for (i = 0; i < l; ++i) {
- if (buf[i] == ' ')
- break;
- putc (buf[i]);
- }
-
- putc ('\n');
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long reg;
- long int size8, size9;
- long int size = 0;
-
- upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table) / sizeof(uint));
-
- /*
- * Preliminary prescaler for refresh (depends on number of
- * banks): This value is selected for four cycles every 62.4 us
- * with two SDRAM banks or four cycles every 31.2 us with one
- * bank. It will be adjusted after memory sizing.
- */
- memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
-
- memctl->memc_mar = 0x00000088;
-
- /*
- * Map controller bank 2 the SDRAM bank 2 at physical address 0.
- */
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
-
- udelay (200);
-
- /* perform SDRAM initializsation sequence */
-
- memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */
- udelay (1);
- memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */
- udelay (1);
-
- memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
-
- udelay (1000);
-
- /*
- * Check Bank 0 Memory Size
- *
- * try 8 column mode
- */
- size8 = dram_size (CONFIG_SYS_MAMR_8COL,
- SDRAM_BASE2_PRELIM,
- SDRAM_MAX_SIZE);
-
- udelay (1000);
-
- /*
- * try 9 column mode
- */
- size9 = dram_size (CONFIG_SYS_MAMR_9COL,
- SDRAM_BASE2_PRELIM,
- SDRAM_MAX_SIZE);
-
- if (size8 < size9) { /* leave configuration at 9 columns */
- size = size9;
-/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
- } else { /* back to 8 columns */
- size = size8;
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
- udelay (500);
-/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
- }
-
- udelay (1000);
-
- /*
- * Adjust refresh rate depending on SDRAM type
- * For types > 128 MBit leave it at the current (fast) rate
- */
- if (size < 0x02000000) {
- /* reduce to 15.6 us (62.4 us / quad) */
- memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
- udelay (1000);
- }
-
- /*
- * Final mapping
- */
- memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
- /*
- * No bank 1
- *
- * invalidate bank
- */
- memctl->memc_br3 = 0;
-
- /* adjust refresh rate depending on SDRAM type, one bank */
- reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
- memctl->memc_mptpr = reg;
-
- udelay (10000);
-
- return (size);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
- long int maxsize)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- memctl->memc_mamr = mamr_value;
-
- return (get_ram_size(base, maxsize));
-}
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#ifndef CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#endif
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size_b0, size_b1;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
- if (size_b1 > size_b0) {
- printf ("## ERROR: "
- "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
- size_b1, size_b1<<20,
- size_b0, size_b0<<20
- );
- flash_info[0].flash_id = FLASH_UNKNOWN;
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[0].sector_count = -1;
- flash_info[1].sector_count = -1;
- flash_info[0].size = 0;
- flash_info[1].size = 0;
- return (0);
- }
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
- /* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
- &flash_info[0]);
-#endif
-
- if (size_b1) {
- memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
- memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
- BR_MS_GPCM | BR_V;
-
- /* Re-do sizing to get full correct info */
- size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
- &flash_info[1]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[1]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
- &flash_info[1]);
-#endif
- } else {
- memctl->memc_br1 = 0; /* invalidate bank */
-
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
- }
-
- flash_info[0].size = size_b0;
- flash_info[1].size = size_b1;
-
- return (size_b0 + size_b1);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- ulong value;
- ulong base = (ulong)addr;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00900090;
-
- value = addr[0];
-
- switch (value) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- value = addr[1]; /* device ID */
-
- switch (value) {
- case AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#if 0 /* enable when device IDs are available */
- case AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
- }
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr = (volatile unsigned long *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr = (volatile unsigned long *)info->start[0];
-
- *addr = 0x00F000F0; /* reset bank */
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_long*)(info->start[sect]);
- addr[0] = 0x00300030;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_long*)(info->start[l_sect]);
- while ((addr[0] & 0x00800080) != 0x00800080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
- addr[0] = 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00A000A0;
-
- *((vu_long *)dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
+++ /dev/null
-#include <common.h>
-#include <mpc8xx.h>
-#include <pcmcia.h>
-
-#undef CONFIG_PCMCIA
-
-#if defined(CONFIG_CMD_PCMCIA)
-#define CONFIG_PCMCIA
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
-#define CONFIG_PCMCIA
-#endif
-
-#ifdef CONFIG_PCMCIA
-
-#define PCMCIA_BOARD_MSG "C2MON"
-
-static void cfg_ports (void)
-{
- volatile immap_t *immap;
- volatile cpm8xx_t *cp;
- ushort sreg;
-
- immap = (immap_t *)CONFIG_SYS_IMMR;
- cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
-
- /*
- * Configure Port C for TPS2211 PC-Card Power-Interface Switch
- *
- * Switch off all voltages, assert shutdown
- */
- sreg = immap->im_ioport.iop_pcdat;
- sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1); /* VAVPP => Hi-Z */
- sreg &= ~(TPS2211_VCCD0 | TPS2211_VCCD1); /* 3V and 5V off */
- immap->im_ioport.iop_pcdat = sreg;
-
- immap->im_ioport.iop_pcpar &= ~(TPS2211_OUTPUTS);
- immap->im_ioport.iop_pcdir |= TPS2211_OUTPUTS;
-
- debug ("Set Port C: PAR: %04x DIR: %04x DAT: %04x\n",
- immap->im_ioport.iop_pcpar,
- immap->im_ioport.iop_pcdir,
- immap->im_ioport.iop_pcdat);
-
- /*
- * Configure Port B for TPS2211 PC-Card Power-Interface Switch
- *
- * Over-Current Input only
- */
- cp->cp_pbpar &= ~(TPS2211_INPUTS);
- cp->cp_pbdir &= ~(TPS2211_INPUTS);
-
- debug ("Set Port B: PAR: %08x DIR: %08x DAT: %08x\n",
- cp->cp_pbpar, cp->cp_pbdir, cp->cp_pbdat);
-}
-
-int pcmcia_hardware_enable(int slot)
-{
- volatile immap_t *immap;
- volatile cpm8xx_t *cp;
- volatile pcmconf8xx_t *pcmp;
- volatile sysconf8xx_t *sysp;
- uint reg, pipr, mask;
- ushort sreg;
- int i;
-
- debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
- udelay(10000);
-
- immap = (immap_t *)CONFIG_SYS_IMMR;
- sysp = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
- cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
-
- /* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
- cfg_ports ();
-
- /*
- * Configure SIUMCR to enable PCMCIA port B
- * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
- */
- sysp->sc_siumcr &= ~SIUMCR_DBGC11; /* set DBGC to 00 */
-
- /* clear interrupt state, and disable interrupts */
- pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
- pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
-
- /*
- * Disable interrupts, DMA, and PCMCIA buffers
- * (isolate the interface) and assert RESET signal
- */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = 0;
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- /*
- * Make sure there is a card in the slot, then configure the interface.
- */
- udelay(10000);
- debug ("[%d] %s: PIPR(%p)=0x%x\n",
- __LINE__,__FUNCTION__,
- &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
- if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
- printf (" No Card found\n");
- return (1);
- }
-
- /*
- * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
- */
- mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
- pipr = pcmp->pcmc_pipr;
- debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
- pipr,
- (reg&PCMCIA_VS1(slot))?"n":"ff",
- (reg&PCMCIA_VS2(slot))?"n":"ff");
-
- sreg = immap->im_ioport.iop_pcdat;
- if ((pipr & mask) == mask) {
- sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1 | /* VAVPP => Hi-Z */
- TPS2211_VCCD1); /* 5V on */
- sreg &= ~(TPS2211_VCCD0); /* 3V off */
- puts (" 5.0V card found: ");
- } else {
- sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1 | /* VAVPP => Hi-Z */
- TPS2211_VCCD0); /* 3V on */
- sreg &= ~(TPS2211_VCCD1); /* 5V off */
- puts (" 3.3V card found: ");
- }
-
- debug ("\nPC DAT: %04x -> 3.3V %s 5.0V %s\n",
- sreg,
- ( (sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) ? "on" : "off",
- (!(sreg & TPS2211_VCCD0) && (sreg & TPS2211_VCCD1)) ? "on" : "off"
- );
-
- immap->im_ioport.iop_pcdat = sreg;
-
- /* Wait 500 ms; use this to check for over-current */
- for (i=0; i<5000; ++i) {
- if ((cp->cp_pbdat & TPS2211_OC) == 0) {
- printf (" *** Overcurrent - Safety shutdown ***\n");
- immap->im_ioport.iop_pcdat &= ~(TPS2211_VCCD0|TPS2211_VCCD1);
- return (1);
- }
- udelay (100);
- }
-
- debug ("Enable PCMCIA buffers and stop RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
-
- udelay(250000); /* some cards need >150 ms to come up :-( */
-
- debug ("# hardware_enable done\n");
-
- return (0);
-}
-
-
-#if defined(CONFIG_CMD_PCMCIA)
-int pcmcia_hardware_disable(int slot)
-{
- volatile immap_t *immap;
- volatile cpm8xx_t *cp;
- volatile pcmconf8xx_t *pcmp;
- u_long reg;
-
- debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
- immap = (immap_t *)CONFIG_SYS_IMMR;
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
-
- /* Configure PCMCIA General Control Register */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = 0;
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
-
- /* ALl voltages off / Hi-Z */
- immap->im_ioport.iop_pcdat |= (TPS2211_VPPD0 | TPS2211_VPPD1 |
- TPS2211_VCCD0 | TPS2211_VCCD1 );
-
- udelay(10000);
-
- return (0);
-}
-#endif
-
-
-int pcmcia_voltage_set(int slot, int vcc, int vpp)
-{
- volatile immap_t *immap;
- volatile pcmconf8xx_t *pcmp;
- u_long reg;
- ushort sreg;
-
- debug ("voltage_set: "
- PCMCIA_BOARD_MSG
- " Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
- 'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
- immap = (immap_t *)CONFIG_SYS_IMMR;
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
- /*
- * Disable PCMCIA buffers (isolate the interface)
- * and assert RESET signal
- */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- /*
- * Configure Port C pins for
- * 5 Volts Enable and 3 Volts enable,
- * Turn all power pins to Hi-Z
- */
- debug ("PCMCIA power OFF\n");
- cfg_ports (); /* Enables switch, but all in Hi-Z */
-
- sreg = immap->im_ioport.iop_pcdat;
- sreg |= TPS2211_VPPD0 | TPS2211_VPPD1; /* VAVPP always Hi-Z */
-
- switch(vcc) {
- case 0: break; /* Switch off */
- case 33: sreg |= TPS2211_VCCD0; /* Switch on 3.3V */
- sreg &= ~TPS2211_VCCD1;
- break;
- case 50: sreg &= ~TPS2211_VCCD0; /* Switch on 5.0V */
- sreg |= TPS2211_VCCD1;
- break;
- default: goto done;
- }
-
- /* Checking supported voltages */
-
- debug ("PIPR: 0x%x --> %s\n",
- pcmp->pcmc_pipr,
- (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-
- immap->im_ioport.iop_pcdat = sreg;
-
-#ifdef DEBUG
-{
- char *s;
-
- if ((sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) {
- s = "at 3.3V";
- } else if (!(sreg & TPS2211_VCCD0) && (sreg & TPS2211_VCCD1)) {
- s = "at 5.0V";
- } else {
- s = "down";
- }
- printf ("PCMCIA powered %s\n", s);
-}
-#endif
-
-done:
- debug ("Enable PCMCIA buffers and stop RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
- slot+'A');
- return (0);
-}
-
-#endif /* CONFIG_PCMCIA */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
cma_mb_reg_write (&mbsp->ser_thr, c);
}
-static void cogent_serial_puts(const char *s)
-{
- while (*s != '\0')
- serial_putc (*s++);
-}
-
static int cogent_serial_getc(void)
{
cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
.stop = NULL,
.setbrg = cogent_serial_setbrg,
.putc = cogent_serial_putc,
- .puts = cogent_serial_puts,
+ .puts = default_serial_puts,
.getc = cogent_serial_getc,
.tstc = cogent_serial_tstc,
};
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
LIB = $(obj)lib$(BOARD).o
-COBJS := $(BOARD).o
-COBJS += ../../nvidia/common/board.o
+COBJS-y := $(BOARD).o
+include ../../nvidia/common/common.mk
+
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
LIB = $(obj)lib$(BOARD).o
-COBJS := $(BOARD).o
-COBJS += ../../nvidia/common/board.o
+COBJS-y := $(BOARD).o
+include ../../nvidia/common/common.mk
+
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
LIB = $(obj)lib$(BOARD).o
-COBJS = $(BOARD).o flash.o plx9030.o pd67290.o
+COBJS = $(BOARD).o flash.o plx9030.o pd67290.o ide.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
#endif
-# ifdef CONFIG_IDE_LED
-void ide_led (uchar led, uchar status)
-{
- u_char val;
- /* We have one PCMCIA slot and use LED H4 for the IDE Interface */
- val = readb(BCSR_BASE + 0x04);
- if (status) { /* led on */
- val |= B_CTRL_LED0;
- } else {
- val &= ~B_CTRL_LED0;
- }
- writeb(val, BCSR_BASE + 0x04);
-}
-# endif
-
int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
+ *
+ * (C) Copyright 2000-2011
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ide.h>
+#include <ata.h>
+#include <asm/io.h>
+
+#define EIEIO __asm__ volatile ("eieio")
+#define SYNC __asm__ volatile ("sync")
+
+void ide_input_swap_data(int dev, ulong *sect_buf, int words)
+{
+ uchar i;
+ volatile uchar *pbuf_even =
+ (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
+ volatile uchar *pbuf_odd =
+ (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
+ ushort *dbuf = (ushort *) sect_buf;
+
+ while (words--) {
+ for (i = 0; i < 2; i++) {
+ *(((uchar *) (dbuf)) + 1) = *pbuf_even;
+ *(uchar *) dbuf = *pbuf_odd;
+ dbuf += 1;
+ }
+ }
+}
+
+void ide_input_data(int dev, ulong *sect_buf, int words)
+{
+ uchar *dbuf;
+ volatile uchar *pbuf_even;
+ volatile uchar *pbuf_odd;
+
+ pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
+ pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
+ dbuf = (uchar *) sect_buf;
+ while (words--) {
+ *dbuf++ = *pbuf_even;
+ EIEIO;
+ SYNC;
+ *dbuf++ = *pbuf_odd;
+ EIEIO;
+ SYNC;
+ *dbuf++ = *pbuf_even;
+ EIEIO;
+ SYNC;
+ *dbuf++ = *pbuf_odd;
+ EIEIO;
+ SYNC;
+ }
+}
+
+void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
+{
+ uchar *dbuf;
+ volatile uchar *pbuf_even;
+ volatile uchar *pbuf_odd;
+
+ pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
+ pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
+ dbuf = (uchar *) sect_buf;
+ while (shorts--) {
+ EIEIO;
+ *dbuf++ = *pbuf_even;
+ EIEIO;
+ *dbuf++ = *pbuf_odd;
+ }
+}
+
+void ide_output_data(int dev, const ulong *sect_buf, int words)
+{
+ uchar *dbuf;
+ volatile uchar *pbuf_even;
+ volatile uchar *pbuf_odd;
+
+ pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
+ pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
+ dbuf = (uchar *) sect_buf;
+ while (words--) {
+ EIEIO;
+ *pbuf_even = *dbuf++;
+ EIEIO;
+ *pbuf_odd = *dbuf++;
+ EIEIO;
+ *pbuf_even = *dbuf++;
+ EIEIO;
+ *pbuf_odd = *dbuf++;
+ }
+}
+
+void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
+{
+ uchar *dbuf;
+ volatile uchar *pbuf_even;
+ volatile uchar *pbuf_odd;
+
+ pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
+ pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
+ dbuf = (uchar *) sect_buf;
+ while (shorts--) {
+ EIEIO;
+ *pbuf_even = *dbuf++;
+ EIEIO;
+ *pbuf_odd = *dbuf++;
+ }
+}
+
+void ide_led(uchar led, uchar status)
+{
+ u_char val;
+ /* We have one PCMCIA slot and use LED H4 for the IDE Interface */
+ val = readb(BCSR_BASE + 0x04);
+ if (status) /* led on */
+ val |= B_CTRL_LED0;
+ else
+ val &= ~B_CTRL_LED0;
+
+ writeb(val, BCSR_BASE + 0x04);
+}
+
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
. = ALIGN(4);
.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ } >.sram
+
. = ALIGN(4);
.rel.dyn : {
__rel_dyn_start = .;
*(.data.rel.ro)
}
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
+
. = ALIGN(4);
__rel_dyn_start = .;
__rel_dyn_end = .;
.sdata : { *(.sdata*) }
- .u_boot_cmd : {
- __u_boot_cmd_start = .;
- *(.u_boot_cmd)
- __u_boot_cmd_end = .;
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
}
uboot_end_data = .;
*(.got)
}
. =.;
- __u_boot_cmd_start =.;
- .u_boot_cmd : {
- *(.u_boot_cmd)
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
}
- __u_boot_cmd_end =.;
. = ALIGN (4);
.rel.dyn : {
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
#include <ide.h>
#include <pci.h>
-extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
int cpci_hd_type;
int ata_device(int dev)
galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
}
-
-static void cpci750_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
static struct serial_device cpci750_serial_drv = {
.name = "cpci750_serial",
.start = cpci750_serial_init,
.stop = NULL,
.setbrg = cpci750_serial_setbrg,
.putc = cpci750_serial_putc,
- .puts = cpci750_serial_puts,
+ .puts = default_serial_puts,
.getc = cpci750_serial_getc,
.tstc = cpci750_serial_tstc,
};
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
arch/powerpc/cpu/mpc8xx/traps.o (.text*)
net/libnet.o (.text*)
board/esteem192e/libesteem192e.o (.text*)
- *(.text.*printf)
. = env_offset;
common/env_embedded.o (.text*)
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-static void read_hw_vers (void);
-
-/* ------------------------------------------------------------------------- */
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-const uint sdram_table[] = {
-
- /* single read (offset 0x00 in upm ram) */
-
- 0xEECEFC24, 0x100DFC24, 0xE02FBC04, 0x01AA7C04,
- 0x1FB5FC00, 0xFFFFFC05, _NOT_USED_, _NOT_USED_,
-
- /* burst read (offset 0x08 in upm ram) */
-
- 0xEECEFC24, 0x100DFC24, 0xE0FFBC04, 0x10FF7C04,
- 0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC00, 0xFFFFFC00,
- 0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* single write (offset 0x18 in upm ram) */
-
- 0xEECEFC24, 0x100DFC24, 0xE02BBC04, 0x01A27C00,
- 0xEFAAFC04, 0x1FB5FC05, _NOT_USED_, _NOT_USED_,
-
- /* burst write (offset 0x20 in upm ram) */
-
- 0xEECEFC24, 0x103DFC24, 0xE0FBBC00, 0x10F77C00,
- 0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC04, 0xFFFFFC05,
-
- /* init part1 (offset 0x28 in upm ram) */
-
- 0xEFFAFC3C, 0x1FF4FC34, 0xEFFCBC34, 0x1FFC3C34,
- 0xFFFC3C35, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
- /* refresh (offset 0x30 in upm ram) */
-
- 0xEFFEBC0C, 0x1FFD7C04, 0xFFFFFC04, 0xFFFFFC05,
-
- /* init part2 (offset 0x34 in upm ram) */
-
- 0xFFFEBC04, 0xEFFC3CB4, 0x1FFC3C34, 0xFFFC3C34,
- 0xFFFC3C34, 0xEFE83CB4, 0x1FB57C35, _NOT_USED_,
-
- /* exception (offset 0x3C in upm ram) */
-
- 0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- *
- * Test ETX ID string (ETX_xxx...)
- *
- * Return 1 always.
- */
-
-int checkboard (void)
-{
- char buf[64];
- int i;
- int l = getenv_f("serial#", buf, sizeof(buf));
-
- puts ("Board: ");
-
-#ifdef SB_ETX094
- gd->board_type = 0; /* 0 = 2SDRAM-Device */
-#else
- gd->board_type = 1; /* 1 = 1SDRAM-Device */
-#endif
-
- if (l < 0 || strncmp(buf, "ETX_", 4)) {
- puts ("### No HW ID - assuming ETX_094\n");
- read_hw_vers ();
- return (0);
- }
-
- for (i = 0; i < l; ++i) {
- if (buf[i] == ' ')
- break;
- putc(buf[i]);
- }
- putc ('\n');
-
- read_hw_vers ();
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- long int size_b0, size_b1, size8, size9;
-
- upmconfig (UPMA, (uint *) sdram_table,
- sizeof (sdram_table) / sizeof (uint));
-
- /*
- * Preliminary prescaler for refresh (depends on number of
- * banks): This value is selected for four cycles every 62.4 us
- * with two SDRAM banks or four cycles every 31.2 us with one
- * bank. It will be adjusted after memory sizing.
- */
- memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K; /* MPTPR_PTP_DIV32 0x0200 */
-
- /* A3(SDRAM)=0 => Bursttype = Sequential
- * A2-A0(SDRAM)=010 => Burst length = 4
- * A4-A6(SDRAM)=010 => CasLat=2
- */
- memctl->memc_mar = 0x00000088;
-
- /*
- * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
- * preliminary addresses - these have to be modified after the
- * SDRAM size has been determined.
- */
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-
- if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
- }
-
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
-
- udelay (200);
-
- /* perform SDRAM initializsation sequence */
-
- memctl->memc_mcr = 0x80004128; /* SDRAM bank 0 (CS2) - Init Part 1 */
- memctl->memc_mcr = 0x80004734; /* SDRAM bank 0 (CS2) - Init Part 2 */
- udelay (1);
-
- if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
- memctl->memc_mcr = 0x80006128; /* SDRAM bank 1 (CS3) - Init Part 1 */
- memctl->memc_mcr = 0x80006734; /* SDRAM bank 1 (CS3) - Init Part 2 */
- udelay (1);
- }
-
- memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
-
- udelay (1000);
-
- /*
- * Check Bank 0 Memory Size for re-configuration
- *
- * try 8 column mode
- */
- size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM,
- SDRAM_MAX_SIZE);
-
- udelay (1000);
-
- /*
- * try 9 column mode
- */
- size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM,
- SDRAM_MAX_SIZE);
-
- if (size8 < size9) { /* leave configuration at 9 columns */
- size_b0 = size9;
-/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
- } else { /* back to 8 columns */
- size_b0 = size8;
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
- udelay (500);
-/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
- }
-
- if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
- /*
- * Check Bank 1 Memory Size
- * use current column settings
- * [9 column SDRAM may also be used in 8 column mode,
- * but then only half the real size will be used.]
- */
- size_b1 =
- dram_size (memctl->memc_mamr, (long *) SDRAM_BASE3_PRELIM,
- SDRAM_MAX_SIZE);
-/* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */
- } else {
- size_b1 = 0;
- }
-
- udelay (1000);
-
- /*
- * Adjust refresh rate depending on SDRAM type, both banks
- * For types > 128 MBit leave it at the current (fast) rate
- */
- if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
- /* reduce to 15.6 us (62.4 us / quad) */
- memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K; /*DIV16 */
- udelay (1000);
- }
-
- /*
- * Final mapping: map bigger bank first
- */
- if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */
-
- memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br3 =
- (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
- if (size_b0 > 0) {
- /*
- * Position Bank 0 immediately above Bank 1
- */
- memctl->memc_or2 =
- ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br2 =
- ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
- + size_b1;
- } else {
- unsigned long reg;
-
- /*
- * No bank 0
- *
- * invalidate bank
- */
- memctl->memc_br2 = 0;
-
- /* adjust refresh rate depending on SDRAM type, one bank */
- reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
- memctl->memc_mptpr = reg;
- }
-
- } else { /* SDRAM Bank 0 is bigger - map first */
-
- memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br2 =
- (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
- if (size_b1 > 0) {
- /*
- * Position Bank 1 immediately above Bank 0
- */
- memctl->memc_or3 =
- ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br3 =
- ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
- + size_b0;
- } else {
- unsigned long reg;
-
- /*
- * No bank 1
- *
- * invalidate bank
- */
- memctl->memc_br3 = 0;
-
- /* adjust refresh rate depending on SDRAM type, one bank */
- reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
- memctl->memc_mptpr = reg;
- }
- }
-
- udelay (10000);
-
- return (size_b0 + size_b1);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
- long int maxsize)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- memctl->memc_mamr = mamr_value;
-
- return (get_ram_size(base, maxsize));
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* HW-ID Table (Bits: 2^9;2^7;2^5) */
-#define HW_ID_0 0x0000
-#define HW_ID_1 0x0020
-#define HW_ID_2 0x0080
-#define HW_ID_3 0x00a0
-#define HW_ID_4 0x0200
-#define HW_ID_5 0x0220
-#define HW_ID_6 0x0280
-#define HW_ID_7 0x02a0
-
-void read_hw_vers ()
-{
- unsigned short rd_msk = 0x02A0;
-
- /* HW-ID pin-definition */
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- immr->im_ioport.iop_pddir &= ~(rd_msk);
- immr->im_ioport.iop_pdpar &= ~(rd_msk);
-
- /* debug printf("State of PD: %x\n",immr->im_ioport.iop_pddat); */
-
- /* Check the HW-ID */
- printf ("HW-Version: ");
- switch (immr->im_ioport.iop_pddat & rd_msk) {
- case HW_ID_0:
- printf ("V0.1 - V0.3 / W97238-Q3162-A1-1-2\n");
- break;
- case HW_ID_1:
- printf ("V0.9 / W50037-Q1-D6-1\n");
- break;
- case HW_ID_2:
- printf ("NOT USED - assuming ID#2\n");
- break;
- case HW_ID_3:
- printf ("NOT USED - assuming ID#3\n");
- break;
- case HW_ID_4:
- printf ("NOT USED - assuming ID#4\n");
- break;
- case HW_ID_5:
- printf ("NOT USED - assuming ID#5\n");
- break;
- case HW_ID_6:
- printf ("NOT USED - assuming ID#6\n");
- break;
- case HW_ID_7:
- printf ("NOT USED - assuming ID#7\n");
- break;
- default:
- printf ("###Error###\n");
- break;
- }
-}
-
-/* ------------------------------------------------------------------------- */
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long *addr, flash_info_t *info);
-static int write_word(flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets(ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size_b0;
- int i;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
- flash_info[i].flash_id = FLASH_UNKNOWN;
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-#ifdef CONFIG_FLASH_16BIT
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
- BR_MS_GPCM | BR_V | BR_PS_16; /* 16 Bit data port */
-#else
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
- BR_MS_GPCM | BR_V;
-#endif
-
- /* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE,
- &flash_info[0]);
-
- flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
- memctl->memc_br1 = 0; /* invalidate bank 1 */
-
- flash_info[0].size = size_b0;
-
- return size_b0;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets(ulong base, flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return;
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00002000);
-
- return;
- }
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
-#ifdef CONFIG_FLASH_16BIT
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
-#else
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
-#endif
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--)
- info->start[i] = base + i * 0x00020000;
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf("AMD ");
- break;
- case FLASH_MAN_FUJ:
- printf("FUJITSU ");
- break;
- case FLASH_MAN_SST:
- printf("SST ");
- break;
- case FLASH_MAN_STM:
- printf("STM ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM400B:
- printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T:
- printf("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B:
- printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T:
- printf("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B:
- printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T:
- printf("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B:
- printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T:
- printf("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- case FLASH_SST200A:
- printf("39xF200A (2M = 128K x 16)\n");
- break;
- case FLASH_SST400A:
- printf("39xF400A (4M = 256K x 16)\n");
- break;
- case FLASH_SST800A:
- printf("39xF800A (8M = 512K x 16)\n");
- break;
- case FLASH_STM800AB:
- printf("M29W800AB (8M = 512K x 16)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- break;
- }
-
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf("\n ");
- printf(" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size(vu_long *addr, flash_info_t *info)
-{
- short i;
- ulong value;
- ulong base = (ulong)addr;
-
- /* Write auto select command: read Manufacturer ID */
-#ifdef CONFIG_FLASH_16BIT
- vu_short *s_addr = (vu_short *)addr;
- s_addr[0x5555] = 0x00AA;
- s_addr[0x2AAA] = 0x0055;
- s_addr[0x5555] = 0x0090;
- value = s_addr[0];
- value = value|(value<<16);
-#else
- addr[0x5555] = 0x00AA00AA;
- addr[0x2AAA] = 0x00550055;
- addr[0x5555] = 0x00900090;
- value = addr[0];
-#endif
-
- switch (value) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- case STM_MANUFACT:
- info->flash_id = FLASH_MAN_STM;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return 0; /* no or unknown flash */
- }
-#ifdef CONFIG_FLASH_16BIT
- value = s_addr[1];
- value = value|(value<<16);
-#else
- value = addr[1]; /* device ID */
-#endif
-
- switch (value) {
- case AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
-#ifdef CONFIG_FLASH_16BIT
- info->sector_count = 19;
- info->size = 0x00100000; /* => 1 MB */
-#else
- info->sector_count = 19;
- info->size = 0x00200000; /* => 2 MB */
-#endif
- break;
-
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
-#ifdef CONFIG_FLASH_16BIT
- info->sector_count = 35;
- info->size = 0x00200000; /* => 2 MB */
-#else
- info->sector_count = 35;
- info->size = 0x00400000; /* => 4 MB */
-#endif
-
- break;
- case SST_ID_xF200A:
- info->flash_id += FLASH_SST200A;
- info->sector_count = 64; /* 39xF200A (2M = 128K x 16) */
- info->size = 0x00080000;
- break;
- case SST_ID_xF400A:
- info->flash_id += FLASH_SST400A;
- info->sector_count = 128; /* 39xF400A (4M = 256K x 16) */
- info->size = 0x00100000;
- break;
- case SST_ID_xF800A:
- info->flash_id += FLASH_SST800A;
- info->sector_count = 256; /* 39xF800A (8M = 512K x 16) */
- info->size = 0x00200000;
- break; /* => 2 MB */
- case STM_ID_x800AB:
- info->flash_id += FLASH_STM800AB;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
- default:
- info->flash_id = FLASH_UNKNOWN;
- return 0; /* => no or unknown flash */
-
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00002000);
- } else { /* AMD and Fujitsu types */
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
-#ifdef CONFIG_FLASH_16BIT
-
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++)
- info->start[i] = base +
- (i * 0x00010000) - 0x00030000;
-#else
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++)
- info->start[i] = base +
- (i * 0x00020000) - 0x00060000;
-#endif
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--)
- info->start[i] = base + i * 0x00020000;
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /*
- * read sector protection at sector address:
- * (A7 .. A0) = 0x02
- * D0 = 1 if protected
- */
-#ifdef CONFIG_FLASH_16BIT
- s_addr = (volatile unsigned short *)(info->start[i]);
- info->protect[i] = s_addr[2] & 1;
-#else
- addr = (volatile unsigned long *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
-#endif
- }
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
-#ifdef CONFIG_FLASH_16BIT
- s_addr = (volatile unsigned short *)(info->start[0]);
- *s_addr = 0x00F0; /* reset bank */
-#else
- addr = (volatile unsigned long *)info->start[0];
- *addr = 0x00F000F0; /* reset bank */
-#endif
-
- }
- return info->size;
-}
-
-int flash_erase(flash_info_t *info, int s_first, int s_last)
-{
- vu_long *addr = (vu_long *)(info->start[0]);
- int flag, prot, sect;
- ulong start, now, last;
-#ifdef CONFIG_FLASH_16BIT
- vu_short *s_addr = (vu_short *)addr;
-#endif
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN)
- printf("- missing\n");
- else
- printf("- no sectors to erase\n");
- return 1;
- }
-/*#ifndef CONFIG_FLASH_16BIT
- ulong type;
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_SST) && (type != FLASH_MAN_STM)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return;
- }
-#endif*/
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect])
- prot++;
- }
-
- if (prot) {
- printf("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf("\n");
- }
-
- start = get_timer(0);
- last = start;
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
-#ifdef CONFIG_FLASH_16BIT
- vu_short *s_sect_addr = (vu_short *)(info->start[sect]);
-#else
- vu_long *sect_addr = (vu_long *)(info->start[sect]);
-#endif
- /* Disable interrupts which might cause a timeout */
- flag = disable_interrupts();
-
-#ifdef CONFIG_FLASH_16BIT
-
- /*printf("\ns_sect_addr=%x",s_sect_addr);*/
- s_addr[0x5555] = 0x00AA;
- s_addr[0x2AAA] = 0x0055;
- s_addr[0x5555] = 0x0080;
- s_addr[0x5555] = 0x00AA;
- s_addr[0x2AAA] = 0x0055;
- s_sect_addr[0] = 0x0030;
-#else
- addr[0x5555] = 0x00AA00AA;
- addr[0x2AAA] = 0x00550055;
- addr[0x5555] = 0x00800080;
- addr[0x5555] = 0x00AA00AA;
- addr[0x2AAA] = 0x00550055;
- sect_addr[0] = 0x00300030;
-#endif
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay(1000);
-
-#ifdef CONFIG_FLASH_16BIT
- while ((s_sect_addr[0] & 0x0080) != 0x0080) {
-#else
- while ((sect_addr[0] & 0x00800080) != 0x00800080) {
-#endif
- now = get_timer(start);
- if (now > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf("Timeout\n");
- return 1;
- }
- /* show every second that we're waiting */
- if ((now - last) > 1000) {
- putc('.');
- last = now;
- }
- }
- }
- }
-
- /* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
-#ifdef CONFIG_FLASH_16BIT
- s_addr[0] = 0x00F0; /* reset bank */
-#else
- addr[0] = 0x00F000F0; /* reset bank */
-#endif
-
- printf(" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return 4;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- l = addr - wp;
-
- if (l != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp)
- data = (data << 8) | (*(uchar *)cp);
-
- for (; i < 4 && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp)
- data = (data << 8) | (*(uchar *)cp);
-
- rc = write_word(info, wp, data);
-
- if (rc != 0)
- return rc;
-
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i = 0; i < 4; ++i)
- data = (data << 8) | *src++;
-
- rc = write_word(info, wp, data);
- if (rc != 0)
- return rc;
-
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0)
- return 0;
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < 4; ++i, ++cp)
- data = (data << 8) | (*(uchar *)cp);
-
- return write_word(info, wp, data);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word(flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long *)(info->start[0]);
-
-#ifdef CONFIG_FLASH_16BIT
- vu_short high_data;
- vu_short low_data;
- vu_short *s_addr = (vu_short *)addr;
-#endif
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data)
- return 2;
-
-#ifdef CONFIG_FLASH_16BIT
- /* Write the 16 higher-bits */
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- high_data = ((data>>16) & 0x0000ffff);
-
- s_addr[0x5555] = 0x00AA;
- s_addr[0x2AAA] = 0x0055;
- s_addr[0x5555] = 0x00A0;
-
- *((vu_short *)dest) = high_data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer(0);
- while ((*((vu_short *)dest) & 0x0080) != (high_data & 0x0080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
- return 1;
- }
-
- /* Write the 16 lower-bits */
-#endif
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-#ifdef CONFIG_FLASH_16BIT
- dest += 0x2;
- low_data = (data & 0x0000ffff);
-
- s_addr[0x5555] = 0x00AA;
- s_addr[0x2AAA] = 0x0055;
- s_addr[0x5555] = 0x00A0;
- *((vu_short *)dest) = low_data;
-
-#else
- addr[0x5555] = 0x00AA00AA;
- addr[0x2AAA] = 0x00550055;
- addr[0x5555] = 0x00A000A0;
- *((vu_long *)dest) = data;
-#endif
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer(0);
-
-#ifdef CONFIG_FLASH_16BIT
- while ((*((vu_short *)dest) & 0x0080) != (low_data & 0x0080)) {
-#else
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-#endif
-
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
- return 1;
- }
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- net/libnet.o (.text*)
- arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
- *(.text.vsprintf)
-
- . = env_offset;
- common/env_embedded.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
#endif /* CONFIG_MPSC */
-static void evb64260_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
static struct serial_device evb64260_serial_drv = {
.name = "evb64260_serial",
.start = evb64260_serial_init,
.stop = NULL,
.setbrg = evb64260_serial_setbrg,
.putc = evb64260_serial_putc,
- .puts = evb64260_serial_puts,
+ .puts = default_serial_puts,
.getc = evb64260_serial_getc,
.tstc = evb64260_serial_tstc,
};
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
COBJS-$(CONFIG_P3041DS) += ics307_clk.o
COBJS-$(CONFIG_P4080DS) += ics307_clk.o
COBJS-$(CONFIG_P5020DS) += ics307_clk.o
+COBJS-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o
# deal with common files for P-series corenet based devices
SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o
return 0;
}
-U_BOOT_CMD(
- pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
- "Reset the board using the FPGA sequencer",
+#ifdef CONFIG_SYS_LONGHELP
+static char pixis_help_text[] =
"- hard reset to default bank\n"
"pixis_reset altbank - reset to alternate bank\n"
#ifdef DEBUG
"pixis_reset dump - display the PIXIS registers\n"
#endif
- "pixis_reset sysclk <SYSCLK_freq> - reset with SYSCLK frequency(KHz)\n"
+ "pixis_reset sysclk <SYSCLK_freq> - reset with SYSCLK frequency(KHz)\n";
+#endif
+
+U_BOOT_CMD(
+ pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
+ "Reset the board using the FPGA sequencer", pixis_help_text
);
void qixis_reset(void)
{
- QIXIS_WRITE(rst_ctl, 0x83);
+ QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET);
}
void qixis_bank_reset(void)
{
- QIXIS_WRITE(rcfg_ctl, 0x20);
- QIXIS_WRITE(rcfg_ctl, 0x21);
+ QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_IDLE);
+ QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START);
}
-/* Set the boot bank to the power-on default bank0 */
+/* Set the boot bank to the power-on default bank */
void clear_altbank(void)
{
u8 reg;
reg = QIXIS_READ(brdcfg[0]);
- reg = reg & ~QIXIS_LBMAP_MASK;
+ reg = (reg & ~QIXIS_LBMAP_MASK) | QIXIS_LBMAP_DFLTBANK;
QIXIS_WRITE(brdcfg[0], reg);
}
printf("ctl_sys = %02x\n", QIXIS_READ(ctl_sys));
printf("rcw_ctl = %02x\n", QIXIS_READ(rcw_ctl));
printf("present = %02x\n", QIXIS_READ(present));
+ printf("present2 = %02x\n", QIXIS_READ(present2));
printf("clk_spd = %02x\n", QIXIS_READ(clk_spd));
printf("stat_dut = %02x\n", QIXIS_READ(stat_dut));
printf("stat_sys = %02x\n", QIXIS_READ(stat_sys));
printf("stat_alrm = %02x\n", QIXIS_READ(stat_alrm));
- printf("ctl_sys2 = %02x\n", QIXIS_READ(ctl_sys2));
}
#endif
for (i = 0; i < ARRAY_SIZE(period); i++) {
if (strcmp(argv[2], period[i]) == 0) {
/* disable watchdog */
- QIXIS_WRITE(rcfg_ctl, rcfg & ~0x08);
+ QIXIS_WRITE(rcfg_ctl,
+ rcfg & ~QIXIS_RCFG_CTL_WATCHDOG_ENBLE);
QIXIS_WRITE(watch, ((i<<2) - 1));
QIXIS_WRITE(rcfg_ctl, rcfg);
return 0;
u8 stat_sys;
u8 stat_alrm;
u8 present;
- u8 ctl_sys2;
+ u8 present2; /* Presence Status Register 2,0x0c */
u8 rcw_ctl;
u8 ctl_led;
u8 i2cblk;
u8 res15[16];
};
-#define QIXIS_BASE 0xffdf0000
-#define QIXIS_LBMAP_SWITCH 7
-#define QIXIS_LBMAP_MASK 0x0f
-#define QIXIS_LBMAP_SHIFT 0
-#define QIXIS_LBMAP_ALTBANK 0x04
-
u8 qixis_read(unsigned int reg);
void qixis_write(unsigned int reg, u8 value);
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "vsc3316_3308.h"
+
+#define REVISION_ID_REG 0x7E
+#define INTERFACE_MODE_REG 0x79
+#define CURRENT_PAGE_REGISTER 0x7F
+#define CONNECTION_CONFIG_PAGE 0x00
+#define INPUT_STATE_REG 0x13
+#define GLOBAL_INPUT_ISE1 0x51
+#define GLOBAL_INPUT_ISE2 0x52
+#define GLOBAL_INPUT_LOS 0x55
+#define GLOBAL_CORE_CNTRL 0x5D
+#define OUTPUT_MODE_PAGE 0x23
+#define CORE_CONTROL_PAGE 0x25
+#define CORE_CONFIG_REG 0x75
+
+int vsc_if_enable(unsigned int vsc_addr)
+{
+ u8 data;
+
+ debug("VSC:Configuring VSC at I2C address 0x%2x"
+ " for 2-wire interface\n", vsc_addr);
+
+ /* enable 2-wire Serial InterFace (I2C) */
+ data = 0x02;
+ return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1);
+}
+
+int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+ unsigned int num_con)
+{
+ unsigned int i;
+ u8 rev_id = 0;
+ int ret;
+
+ debug("VSC:Initializing VSC3316 at I2C address 0x%2x"
+ " for Tx\n", vsc_addr);
+
+ ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
+ if (ret < 0) {
+ printf("VSC:0x%x could not read REV_ID from device.\n",
+ vsc_addr);
+ return ret;
+ }
+
+ if (rev_id != 0xab) {
+ printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
+ vsc_addr);
+ return -ENODEV;
+ }
+
+ ret = vsc_if_enable(vsc_addr);
+ if (ret) {
+ printf("VSC:0x%x could not configured for 2-wire I/F.\n",
+ vsc_addr);
+ return ret;
+ }
+
+ /* config connections - page 0x00 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
+
+ /* Making crosspoint connections, by connecting required
+ * input to output */
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
+
+ /* input state - page 0x13 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
+ /* Configuring the required input of the switch */
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][0], 0x80);
+
+ /* Setting Global Input LOS threshold value */
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
+
+ /* config output mode - page 0x23 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
+ /* Turn ON the Output driver correspond to required output*/
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][1], 0);
+
+ /* configure global core control register, Turn on Global core power */
+ i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
+
+ vsc_wp_config(vsc_addr);
+
+ return 0;
+}
+
+int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+ unsigned int num_con)
+{
+ unsigned int i;
+ u8 rev_id = 0;
+ int ret;
+
+ debug("VSC:Initializing VSC3308 at I2C address 0x%x"
+ " for Tx\n", vsc_addr);
+
+ ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
+ if (ret < 0) {
+ printf("VSC:0x%x could not read REV_ID from device.\n",
+ vsc_addr);
+ return ret;
+ }
+
+ if (rev_id != 0xab) {
+ printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
+ vsc_addr);
+ return -ENODEV;
+ }
+
+ ret = vsc_if_enable(vsc_addr);
+ if (ret) {
+ printf("VSC:0x%x could not configured for 2-wire I/F.\n",
+ vsc_addr);
+ return ret;
+ }
+
+ /* config connections - page 0x00 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
+
+ /* Making crosspoint connections, by connecting required
+ * input to output */
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
+
+ /*Configure Global Input ISE and gain */
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0x12);
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0x12);
+
+ /* input state - page 0x13 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
+ /* Turning ON the required input of the switch */
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][0], 0);
+
+ /* Setting Global Input LOS threshold value */
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
+
+ /* config output mode - page 0x23 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
+ /* Turn ON the Output driver correspond to required output*/
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][1], 0);
+
+ /* configure global core control register, Turn on Global core power */
+ i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
+
+ vsc_wp_config(vsc_addr);
+
+ return 0;
+}
+
+void vsc_wp_config(unsigned int vsc_addr)
+{
+ debug("VSC:Configuring VSC at address:0x%x for WP\n", vsc_addr);
+
+ /* For new crosspoint configuration to occur, WP bit of
+ * CORE_CONFIG_REG should be set 1 and then reset to 0 */
+ i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x01);
+ i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x0);
+}
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VSC_CROSSBAR_H_
+#define __VSC_CROSSBAR_H 1_
+
+#include <common.h>
+#include <i2c.h>
+#include <errno.h>
+
+int vsc_if_enable(unsigned int vsc_addr);
+int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+ unsigned int num_con);
+int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+ unsigned int num_con);
+void vsc_wp_config(unsigned int vsc_addr);
+
+#endif /* __VSC_CROSSBAR_H_ */
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
{
arch/m68k/cpu/mcf52x2/start.o (.text*)
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/env_embedded.o (.text*)
+
*(.text*)
}
_etext = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Copyright 2010-2012 Freescale Semiconductor, Inc.
+# TsiChung Liew (Tsi-Chung.Liew@freescale.com)
#
# See file CREDITS for list of people who contributed to this
# project.
LIB = $(obj)lib$(BOARD).o
-COBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Copyright 2010-2012 Freescale Semiconductor, Inc.
+# TsiChung Liew (Tsi-Chung.Liew@freescale.com)
#
# See file CREDITS for list of people who contributed to this
# project.
# MA 02111-1307 USA
#
-#
-# BMW board
-#
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-# NOTE: The flags below affect how the BCM570x driver is compiled
-PLATFORM_CPPFLAGS += -DEMBEDDED -DBIG_ENDIAN_HOST -DINCLUDE_5701_AX_FIX=1\
- -DDBG=0 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
--- /dev/null
+/*
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <asm/io.h>
+#include <asm/immap.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ /*
+ * need to to:
+ * Check serial flash size. if 2mb evb, else 8mb demo
+ */
+ puts("Board: ");
+ puts("Freescale MCF54418 Tower System\n");
+ return 0;
+};
+
+phys_size_t initdram(int board_type)
+{
+ u32 dramsize;
+
+#if defined(CONFIG_SERIAL_BOOT)
+ /*
+ * Serial Boot: The dram is already initialized in start.S
+ * only require to return DRAM size
+ */
+ dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
+#else
+ sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
+ ccm_t *ccm = (ccm_t *)MMAP_CCM;
+ gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+ pm_t *pm = (pm_t *) MMAP_PM;
+ u32 i;
+
+ dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
+
+ for (i = 0x13; i < 0x20; i++) {
+ if (dramsize == (1 << i))
+ break;
+ }
+
+ out_8(&pm->pmcr0, 0x2E);
+ out_8(&gpio->mscr_sdram, 1);
+
+ clrbits_be16(&ccm->misccr2, CCM_MISCCR2_FBHALF);
+ setbits_be16(&ccm->misccr2, CCM_MISCCR2_DDR2CLK);
+
+ out_be32(&sdram->rcrcr, 0x40000000);
+ out_be32(&sdram->padcr, 0x01030203);
+
+ out_be32(&sdram->cr00, 0x01010101);
+ out_be32(&sdram->cr01, 0x00000101);
+ out_be32(&sdram->cr02, 0x01010100);
+ out_be32(&sdram->cr03, 0x01010000);
+ out_be32(&sdram->cr04, 0x00010101);
+ out_be32(&sdram->cr06, 0x00010100);
+ out_be32(&sdram->cr07, 0x00000001);
+ out_be32(&sdram->cr08, 0x01000001);
+ out_be32(&sdram->cr09, 0x00000100);
+ out_be32(&sdram->cr10, 0x00010001);
+ out_be32(&sdram->cr11, 0x00000200);
+ out_be32(&sdram->cr12, 0x01000002);
+ out_be32(&sdram->cr13, 0x00000000);
+ out_be32(&sdram->cr14, 0x00000100);
+ out_be32(&sdram->cr15, 0x02000100);
+ out_be32(&sdram->cr16, 0x02000407);
+ out_be32(&sdram->cr17, 0x02030007);
+ out_be32(&sdram->cr18, 0x02000100);
+ out_be32(&sdram->cr19, 0x0A030203);
+ out_be32(&sdram->cr20, 0x00020708);
+ out_be32(&sdram->cr21, 0x00050008);
+ out_be32(&sdram->cr22, 0x04030002);
+ out_be32(&sdram->cr23, 0x00000004);
+ out_be32(&sdram->cr24, 0x020A0000);
+ out_be32(&sdram->cr25, 0x0C00000E);
+ out_be32(&sdram->cr26, 0x00002004);
+ out_be32(&sdram->cr28, 0x00100010);
+ out_be32(&sdram->cr29, 0x00100010);
+ out_be32(&sdram->cr31, 0x07990000);
+ out_be32(&sdram->cr40, 0x00000000);
+ out_be32(&sdram->cr41, 0x00C80064);
+ out_be32(&sdram->cr42, 0x44520002);
+ out_be32(&sdram->cr43, 0x00C80023);
+ out_be32(&sdram->cr45, 0x0000C350);
+ out_be32(&sdram->cr56, 0x04000000);
+ out_be32(&sdram->cr57, 0x03000304);
+ out_be32(&sdram->cr58, 0x40040000);
+ out_be32(&sdram->cr59, 0xC0004004);
+ out_be32(&sdram->cr60, 0x0642C000);
+ out_be32(&sdram->cr61, 0x00000642);
+ asm("tpf");
+
+ out_be32(&sdram->cr09, 0x01000100);
+
+ udelay(100);
+#endif
+ return dramsize;
+};
+
+int testdram(void)
+{
+ return 0;
+}
/*
- * (C) Copyright 2001-2010
+ * (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* MA 02111-1307 USA
*/
-OUTPUT_ARCH(powerpc)
+OUTPUT_ARCH(m68k)
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
- net/libnet.o (.text*)
-
- . = env_offset;
- common/env_embedded.o (.text*)
+ arch/m68k/cpu/mcf5445x/start.o (.text*)
*(.text*)
}
. = (. + 0x00FF) & 0xFFFFFF00;
_erotext = .;
PROVIDE (erotext = .);
+
.reloc :
{
+ __got_start = .;
+ KEEP(*(.got))
+ __got_end = .;
_GOT2_TABLE_ = .;
KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
_FIXUP_TABLE_ = .;
KEEP(*(.fixup))
}
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
__init_end = .;
__bss_start = .;
- .bss (NOLOAD) :
+ .bss (NOLOAD) :
{
+ _sbss = .;
*(.bss*)
*(.sbss*)
*(COMMON)
. = ALIGN(4);
+ _ebss = .;
}
__bss_end__ = . ;
PROVIDE (end = .);
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
#ifndef CONFIG_NAND_SPL
static struct pci_region pci_regions[] = {
{
- bus_start: CONFIG_SYS_PCI1_MEM_BASE,
- phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
- size: CONFIG_SYS_PCI1_MEM_SIZE,
- flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+ .bus_start = CONFIG_SYS_PCI1_MEM_BASE,
+ .phys_start = CONFIG_SYS_PCI1_MEM_PHYS,
+ .size = CONFIG_SYS_PCI1_MEM_SIZE,
+ .flags = PCI_REGION_MEM | PCI_REGION_PREFETCH
},
{
- bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
- phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
- size: CONFIG_SYS_PCI1_MMIO_SIZE,
- flags: PCI_REGION_MEM
+ .bus_start = CONFIG_SYS_PCI1_MMIO_BASE,
+ .phys_start = CONFIG_SYS_PCI1_MMIO_PHYS,
+ .size = CONFIG_SYS_PCI1_MMIO_SIZE,
+ .flags = PCI_REGION_MEM
},
{
- bus_start: CONFIG_SYS_PCI1_IO_BASE,
- phys_start: CONFIG_SYS_PCI1_IO_PHYS,
- size: CONFIG_SYS_PCI1_IO_SIZE,
- flags: PCI_REGION_IO
+ .bus_start = CONFIG_SYS_PCI1_IO_BASE,
+ .phys_start = CONFIG_SYS_PCI1_IO_PHYS,
+ .size = CONFIG_SYS_PCI1_IO_SIZE,
+ .flags = PCI_REGION_IO
}
};
#include "bcsr.h"
-void enable_8568mds_duart()
+void enable_8568mds_duart(void)
{
volatile uint* duart_mux = (uint *)(CONFIG_SYS_CCSRBAR + 0xe0060);
volatile uint* devices = (uint *)(CONFIG_SYS_CCSRBAR + 0xe0070);
bcsr[5] |= 0x01; /* Enable Duart in BCSR*/
}
-void enable_8568mds_flash_write()
+void enable_8568mds_flash_write(void)
{
volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
bcsr[9] |= 0x01;
}
-void disable_8568mds_flash_write()
+void disable_8568mds_flash_write(void)
{
volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
bcsr[9] &= ~(0x01);
}
-void enable_8568mds_qe_mdio()
+void enable_8568mds_qe_mdio(void)
{
u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
#include "bcsr.h"
-void enable_8569mds_flash_write()
+void enable_8569mds_flash_write(void)
{
setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP);
}
-void disable_8569mds_flash_write()
+void disable_8569mds_flash_write(void)
{
clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP);
}
-void enable_8569mds_qe_uec()
+void enable_8569mds_qe_uec(void)
{
#if defined(CONFIG_SYS_UCC_RGMII_MODE)
setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7),
#endif
}
-void disable_8569mds_brd_eeprom_write_protect()
+void disable_8569mds_brd_eeprom_write_protect(void)
{
clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), BCSR7_BRD_WRT_PROTECT);
}
}
. = ALIGN(4);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = ALIGN(4);
#
-# (C) Copyright 2004-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
-# Added support for Wind River SBC8560 board
+# Copyright 2012 Freescale Semiconductor, Inc.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
+COBJS-y += ddr.o
+COBJS-$(CONFIG_T4240QDS)+= eth.o
+COBJS-$(CONFIG_PCI) += pci.o
COBJS-y += law.o
COBJS-y += tlb.o
-COBJS-$(CONFIG_FSL_DDR1) += ddr.o
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(call cmd_link_o_target, $(OBJS))
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
#########################################################################
# defines $(obj).depend target
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 or later as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <hwconfig.h>
+#include <asm/mmu.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct board_specific_parameters {
+ u32 n_ranks;
+ u32 datarate_mhz_high;
+ u32 clk_adjust;
+ u32 wrlvl_start;
+ u32 wrlvl_ctl_2;
+ u32 wrlvl_ctl_3;
+ u32 cpo;
+ u32 write_data_delay;
+ u32 force_2T;
+};
+
+/*
+ * This table contains all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+static const struct board_specific_parameters udimm0[] = {
+ /*
+ * memory controller 0
+ * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
+ * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay |
+ */
+ {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0},
+ {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
+ {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
+ {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
+ {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
+ {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
+ {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
+ {}
+};
+
+/*
+ * The three slots have slightly different timing. The center values are good
+ * for all slots. We use identical speed tables for them. In future use, if
+ * DIMMs require separated tables, make more entries as needed.
+ */
+static const struct board_specific_parameters *udimms[] = {
+ udimm0,
+};
+
+static const struct board_specific_parameters rdimm0[] = {
+ /*
+ * memory controller 0
+ * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
+ * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay |
+ */
+ {4, 1350, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0},
+ {4, 1666, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0},
+ {4, 2140, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0},
+ {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0},
+ {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
+ {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
+ {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
+ {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
+ {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
+ {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
+ {}
+};
+
+/*
+ * The three slots have slightly different timing. See comments above.
+ */
+static const struct board_specific_parameters *rdimms[] = {
+ rdimm0,
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+ ulong ddr_freq;
+
+ if (ctrl_num > 2) {
+ printf("Not supported controller number %d\n", ctrl_num);
+ return;
+ }
+ if (!pdimm->n_ranks)
+ return;
+
+ /*
+ * we use identical timing for all slots. If needed, change the code
+ * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
+ */
+ if (popts->registered_dimm_en)
+ pbsp = rdimms[0];
+ else
+ pbsp = udimms[0];
+
+
+ /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+ * freqency and n_banks specified in board_specific_parameters table.
+ */
+ ddr_freq = get_ddr_freq(0) / 1000000;
+ while (pbsp->datarate_mhz_high) {
+ if (pbsp->n_ranks == pdimm->n_ranks) {
+ if (ddr_freq <= pbsp->datarate_mhz_high) {
+ popts->cpo_override = pbsp->cpo;
+ popts->write_data_delay =
+ pbsp->write_data_delay;
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->wrlvl_start = pbsp->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ popts->twoT_en = pbsp->force_2T;
+ goto found;
+ }
+ pbsp_highest = pbsp;
+ }
+ pbsp++;
+ }
+
+ if (pbsp_highest) {
+ printf("Error: board specific timing not found "
+ "for data rate %lu MT/s\n"
+ "Trying to use the highest speed (%u) parameters\n",
+ ddr_freq, pbsp_highest->datarate_mhz_high);
+ popts->cpo_override = pbsp_highest->cpo;
+ popts->write_data_delay = pbsp_highest->write_data_delay;
+ popts->clk_adjust = pbsp_highest->clk_adjust;
+ popts->wrlvl_start = pbsp_highest->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ popts->twoT_en = pbsp_highest->force_2T;
+ } else {
+ panic("DIMM is not supported by this board");
+ }
+found:
+ /*
+ * Factors to consider for half-strength driver enable:
+ * - number of DIMMs installed
+ */
+ popts->half_strength_driver_enable = 0;
+ /*
+ * Write leveling override
+ */
+ popts->wrlvl_override = 1;
+ popts->wrlvl_sample = 0xf;
+
+ /*
+ * Rtt and Rtt_WR override
+ */
+ popts->rtt_override = 0;
+
+ /* Enable ZQ calibration */
+ popts->zq_en = 1;
+
+ /* DHC_EN =1, ODT = 75 Ohm */
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+}
+
+phys_size_t initdram(int board_type)
+{
+ phys_size_t dram_size;
+
+ puts("Initializing....using SPD\n");
+
+ dram_size = fsl_ddr_sdram();
+
+ dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+ dram_size *= 0x100000;
+
+ puts(" DDR: ");
+ return dram_size;
+}
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <malloc.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/fsl_dtsec.h>
+#include <asm/fsl_serdes.h>
+#include "../common/qixis.h"
+#include "../common/fman.h"
+
+#include "t4240qds_qixis.h"
+
+#define EMI_NONE 0xFFFFFFFF
+#define EMI1_RGMII 0
+#define EMI1_SLOT1 1
+#define EMI1_SLOT2 2
+#define EMI1_SLOT3 3
+#define EMI1_SLOT4 4
+#define EMI1_SLOT5 5
+#define EMI1_SLOT7 7
+#define EMI2 8 /* tmp, FIXME */
+/* Slot6 and Slot8 do not have EMI connections */
+
+static int mdio_mux[NUM_FM_PORTS];
+
+static const char *mdio_names[] = {
+ "T4240QDS_MDIO0",
+ "T4240QDS_MDIO1",
+ "T4240QDS_MDIO2",
+ "T4240QDS_MDIO3",
+ "T4240QDS_MDIO4",
+ "T4240QDS_MDIO5",
+ "NULL",
+ "T4240QDS_MDIO7",
+ "T4240QDS_10GC",
+};
+
+static u8 lane_to_slot_fsm1[] = {1, 1, 1, 1, 2, 2, 2, 2};
+static u8 lane_to_slot_fsm2[] = {3, 3, 3, 3, 4, 4, 4, 4};
+
+static const char *t4240qds_mdio_name_for_muxval(u8 muxval)
+{
+ return mdio_names[muxval];
+}
+
+struct mii_dev *mii_dev_for_muxval(u8 muxval)
+{
+ struct mii_dev *bus;
+ const char *name = t4240qds_mdio_name_for_muxval(muxval);
+
+ if (!name) {
+ printf("No bus for muxval %x\n", muxval);
+ return NULL;
+ }
+
+ bus = miiphy_get_dev_by_name(name);
+
+ if (!bus) {
+ printf("No bus by name %s\n", name);
+ return NULL;
+ }
+
+ return bus;
+}
+
+struct t4240qds_mdio {
+ u8 muxval;
+ struct mii_dev *realbus;
+};
+
+static void t4240qds_mux_mdio(u8 muxval)
+{
+ u8 brdcfg4;
+ if ((muxval < 6) || (muxval == 7)) {
+ brdcfg4 = QIXIS_READ(brdcfg[4]);
+ brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
+ brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
+ QIXIS_WRITE(brdcfg[4], brdcfg4);
+ }
+}
+
+static int t4240qds_mdio_read(struct mii_dev *bus, int addr, int devad,
+ int regnum)
+{
+ struct t4240qds_mdio *priv = bus->priv;
+
+ t4240qds_mux_mdio(priv->muxval);
+
+ return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int t4240qds_mdio_write(struct mii_dev *bus, int addr, int devad,
+ int regnum, u16 value)
+{
+ struct t4240qds_mdio *priv = bus->priv;
+
+ t4240qds_mux_mdio(priv->muxval);
+
+ return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int t4240qds_mdio_reset(struct mii_dev *bus)
+{
+ struct t4240qds_mdio *priv = bus->priv;
+
+ return priv->realbus->reset(priv->realbus);
+}
+
+static int t4240qds_mdio_init(char *realbusname, u8 muxval)
+{
+ struct t4240qds_mdio *pmdio;
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate T4240QDS MDIO bus\n");
+ return -1;
+ }
+
+ pmdio = malloc(sizeof(*pmdio));
+ if (!pmdio) {
+ printf("Failed to allocate T4240QDS private data\n");
+ free(bus);
+ return -1;
+ }
+
+ bus->read = t4240qds_mdio_read;
+ bus->write = t4240qds_mdio_write;
+ bus->reset = t4240qds_mdio_reset;
+ sprintf(bus->name, t4240qds_mdio_name_for_muxval(muxval));
+
+ pmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+ if (!pmdio->realbus) {
+ printf("No bus with name %s\n", realbusname);
+ free(bus);
+ free(pmdio);
+ return -1;
+ }
+
+ pmdio->muxval = muxval;
+ bus->priv = pmdio;
+
+ return mdio_register(bus);
+}
+
+void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
+ enum fm_port port, int offset)
+{
+ if (mdio_mux[port] == EMI1_RGMII)
+ fdt_set_phy_handle(blob, prop, pa, "phy_rgmii");
+
+ /* TODO: will do with dts */
+}
+
+void fdt_fixup_board_enet(void *fdt)
+{
+ /* TODO: will do with dts */
+}
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FMAN_ENET)
+ int i;
+ struct memac_mdio_info dtsec_mdio_info;
+ struct memac_mdio_info tgec_mdio_info;
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 srds_prtcl_s1, srds_prtcl_s2;
+
+ srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+ srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+ srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+
+ /* Initialize the mdio_mux array so we can recognize empty elements */
+ for (i = 0; i < NUM_FM_PORTS; i++)
+ mdio_mux[i] = EMI_NONE;
+
+ dtsec_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM2_DTSEC_MDIO_ADDR;
+
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the 1G MDIO bus */
+ fm_memac_mdio_init(bis, &dtsec_mdio_info);
+
+ tgec_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM2_TGEC_MDIO_ADDR;
+ tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+ /* Register the 10G MDIO bus */
+ fm_memac_mdio_init(bis, &tgec_mdio_info);
+
+ /* Register the muxing front-ends to the MDIO buses */
+ t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII);
+ t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
+ t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
+ t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
+ t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
+ t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
+ t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
+ t4240qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
+
+
+ switch (srds_prtcl_s1) {
+ case 1:
+ case 2:
+ case 4:
+ /* XAUI/HiGig in Slot1 and Slot2 */
+ fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC2, FM1_10GEC2_PHY_ADDR);
+ break;
+ case 28:
+ case 36:
+ /* SGMII in Slot1 and Slot2 */
+ fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+ if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
+ fm_info_set_phy_address(FM1_DTSEC9,
+ SGMII_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC10,
+ SGMII_CARD_PORT3_PHY_ADDR);
+ }
+ break;
+ case 38:
+ fm_info_set_phy_address(FM1_DTSEC5, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC6, QSGMII_CARD_PHY_ADDR);
+ if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
+ fm_info_set_phy_address(FM1_DTSEC9,
+ QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC10,
+ QSGMII_CARD_PHY_ADDR);
+ }
+ break;
+ case 40:
+ case 46:
+ case 48:
+ fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+ if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
+ fm_info_set_phy_address(FM1_DTSEC10,
+ SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC9,
+ SGMII_CARD_PORT4_PHY_ADDR);
+ }
+ fm_info_set_phy_address(FM1_DTSEC1, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC3, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4, QSGMII_CARD_PHY_ADDR);
+ break;
+ default:
+ puts("Invalid SerDes1 protocol for T4240QDS\n");
+ break;
+ }
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ int idx = i - FM1_DTSEC1, lane, slot;
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(FSL_SRDS_1,
+ SGMII_FM1_DTSEC1 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot_fsm1[lane];
+ debug("FM1@DTSEC%u expects SGMII in slot %u\n",
+ idx + 1, slot);
+ if (QIXIS_READ(present2) & (1 << (slot - 1)))
+ fm_disable_port(i);
+ switch (slot) {
+ case 1:
+ mdio_mux[i] = EMI1_SLOT1;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case 2:
+ mdio_mux[i] = EMI1_SLOT2;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ };
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /* FM1 DTSEC5 routes to RGMII with EC2 */
+ debug("FM1@DTSEC%u is RGMII at address %u\n",
+ idx + 1, 2);
+ if (i == FM1_DTSEC5)
+ fm_info_set_phy_address(i, 2);
+ mdio_mux[i] = EMI1_RGMII;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ }
+
+ for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_XGMII:
+ mdio_mux[i] = EMI2;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ }
+
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ switch (srds_prtcl_s2) {
+ case 1:
+ case 2:
+ case 4:
+ /* XAUI/HiGig in Slot3 and Slot4 */
+ fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_10GEC2, FM2_10GEC2_PHY_ADDR);
+ break;
+ case 7:
+ case 13:
+ case 14:
+ case 16:
+ case 22:
+ case 23:
+ case 25:
+ case 26:
+ /* XAUI/HiGig in Slot3, SGMII in Slot4 */
+ fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+ break;
+ case 28:
+ case 36:
+ /* SGMII in Slot3 and Slot4 */
+ fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
+ break;
+ case 38:
+ /* QSGMII in Slot3 and Slot4 */
+ fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC5, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC6, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC9, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC10, QSGMII_CARD_PHY_ADDR);
+ break;
+ case 40:
+ case 46:
+ case 48:
+ /* SGMII in Slot3 */
+ fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
+ /* QSGMII in Slot4 */
+ fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
+ break;
+ case 50:
+ case 52:
+ case 54:
+ fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
+ break;
+ case 56:
+ case 57:
+ /* XFI in Slot3, SGMII in Slot4 */
+ fm_info_set_phy_address(FM1_10GEC1, XFI_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC2, XFI_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_10GEC2, XFI_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM2_10GEC1, XFI_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+ break;
+ default:
+ puts("Invalid SerDes2 protocol for T4240QDS\n");
+ break;
+ }
+
+ for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
+ int idx = i - FM2_DTSEC1, lane, slot;
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(FSL_SRDS_2,
+ SGMII_FM2_DTSEC1 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot_fsm2[lane];
+ debug("FM2@DTSEC%u expects SGMII in slot %u\n",
+ idx + 1, slot);
+ if (QIXIS_READ(present2) & (1 << (slot - 1)))
+ fm_disable_port(i);
+ switch (slot) {
+ case 3:
+ mdio_mux[i] = EMI1_SLOT3;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case 4:
+ mdio_mux[i] = EMI1_SLOT4;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ };
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /*
+ * If DTSEC5 is RGMII, then it's routed via via EC1 to
+ * the first on-board RGMII port. If DTSEC6 is RGMII,
+ * then it's routed via via EC2 to the second on-board
+ * RGMII port.
+ */
+ debug("FM2@DTSEC%u is RGMII at address %u\n",
+ idx + 1, i == FM2_DTSEC5 ? 1 : 2);
+ fm_info_set_phy_address(i, i == FM2_DTSEC5 ? 1 : 2);
+ mdio_mux[i] = EMI1_RGMII;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ }
+
+ for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_XGMII:
+ mdio_mux[i] = EMI2;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ }
+#endif /* CONFIG_SYS_NUM_FMAN */
+
+ cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+ return pci_eth_init(bis);
+}
--- /dev/null
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+ SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+ SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+ SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
+#endif
+ SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+ SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ * Copyright 2007-2012 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
* MA 02111-1307 USA
*/
-/*
- * CPU specific code
- */
-
#include <common.h>
#include <command.h>
-#include <asm/system.h>
-
-static void cache_flush(void);
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/fsl_serdes.h>
-int cleanup_before_linux (void)
+void pci_init_board(void)
{
- /*
- * this function is called just before we call linux
- * it prepares the processor for linux
- *
- * we turn off caches etc ...
- */
-
- disable_interrupts ();
-
- /* turn off I/D-cache */
- icache_disable();
- dcache_disable();
-
- /* flush I/D-cache */
- cache_flush();
-
- return 0;
+ fsl_pcie_init_board(0);
}
-/* flush I/D-cache */
-static void cache_flush (void)
+void pci_of_setup(void *blob, bd_t *bd)
{
- unsigned long i = 0;
-
- asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+ FT_FSL_PCI_SETUP;
}
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __T4020QDS_QIXIS_H__
+#define __T4020QDS_QIXIS_H__
+
+/* Definitions of QIXIS Registers for T4020QDS */
+
+/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
+#define BRDCFG4_EMISEL_MASK 0xE0
+#define BRDCFG4_EMISEL_SHIFT 5
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_66 0x0
+#define QIXIS_SYSCLK_83 0x1
+#define QIXIS_SYSCLK_100 0x2
+#define QIXIS_SYSCLK_125 0x3
+#define QIXIS_SYSCLK_133 0x4
+#define QIXIS_SYSCLK_150 0x5
+#define QIXIS_SYSCLK_160 0x6
+#define QIXIS_SYSCLK_166 0x7
+
+/* DDRCLK */
+#define QIXIS_DDRCLK_66 0x0
+#define QIXIS_DDRCLK_100 0x1
+#define QIXIS_DDRCLK_125 0x2
+#define QIXIS_DDRCLK_133 0x3
+
+#define BRDCFG5_RESET 0x00
+
+#define BRDCFG12_SD3EN_MASK 0x20
+#define BRDCFG12_SD3MX_MASK 0x08
+#define BRDCFG12_SD3MX_SLOT5 0x08
+#define BRDCFG12_SD3MX_SLOT6 0x00
+#define BRDCFG12_SD4EN_MASK 0x04
+#define BRDCFG12_SD4MX_MASK 0x03
+#define BRDCFG12_SD4MX_SLOT7 0x02
+#define BRDCFG12_SD4MX_SLOT8 0x01
+#define BRDCFG12_SD4MX_AURO_SATA 0x00
+#endif
--- /dev/null
+/*
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+
+#include "../common/qixis.h"
+#include "../common/vsc3316_3308.h"
+#include "t4qds.h"
+#include "t4240qds_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ u8 sw;
+ struct cpu_type *cpu = gd->cpu;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ unsigned int i;
+
+ printf("Board: %sQDS, ", cpu->name);
+ printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+ QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
+
+ sw = QIXIS_READ(brdcfg[0]);
+ sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+ if (sw < 0x8)
+ printf("vBank: %d\n", sw);
+ else if (sw == 0x8)
+ puts("Promjet\n");
+ else if (sw == 0x9)
+ puts("NAND\n");
+ else
+ printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+
+ /* Display the RCW, so that no one gets confused as to what RCW
+ * we're actually using for this boot.
+ */
+ puts("Reset Configuration Word (RCW):");
+ for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+ u32 rcw = in_be32(&gur->rcwsr[i]);
+
+ if ((i % 4) == 0)
+ printf("\n %08x:", i * 4);
+ printf(" %08x", rcw);
+ }
+ puts("\n");
+
+ /*
+ * Display the actual SERDES reference clocks as configured by the
+ * dip switches on the board. Note that the SWx registers could
+ * technically be set to force the reference clocks to match the
+ * values that the SERDES expects (or vice versa). For now, however,
+ * we just display both values and hope the user notices when they
+ * don't match.
+ */
+ puts("SERDES Reference Clocks: ");
+ sw = QIXIS_READ(brdcfg[2]);
+ for (i = 0; i < MAX_SERDES; i++) {
+ static const char *freq[] = {
+ "100", "125", "156.25", "161.1328125"};
+ unsigned int clock = (sw >> (2 * i)) & 3;
+
+ printf("SERDES%u=%sMHz ", i+1, freq[clock]);
+ }
+ puts("\n");
+
+ return 0;
+}
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+ int ret;
+
+ ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+ if (ret) {
+ puts("PCA: failed to select proper channel\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/* Configure Crossbar switches for Front-Side SerDes Ports */
+int config_frontside_crossbar_vsc3316(void)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 srds_prtcl_s1, srds_prtcl_s2;
+ int ret;
+
+ ret = select_i2c_ch_pca9547(I2C_MUX_CH_VSC3316_FS);
+ if (ret)
+ return ret;
+
+ srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+ if (srds_prtcl_s1) {
+ ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm1_tx, 8);
+ if (ret)
+ return ret;
+ ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm1_rx, 8);
+ if (ret)
+ return ret;
+ }
+
+ srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+ srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+ if (srds_prtcl_s2) {
+ ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm2_tx, 8);
+ if (ret)
+ return ret;
+ ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm2_rx, 8);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+int config_backside_crossbar_mux(void)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 srds_prtcl_s3, srds_prtcl_s4;
+ u8 brdcfg;
+
+ srds_prtcl_s3 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS3_PRTCL;
+ srds_prtcl_s3 >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT;
+ switch (srds_prtcl_s3) {
+ case 0:
+ /* SerDes3 is not enabled */
+ break;
+ case 2:
+ case 9:
+ case 10:
+ /* SD3(0:7) => SLOT5(0:7) */
+ brdcfg = QIXIS_READ(brdcfg[12]);
+ brdcfg &= ~BRDCFG12_SD3MX_MASK;
+ brdcfg |= BRDCFG12_SD3MX_SLOT5;
+ QIXIS_WRITE(brdcfg[12], brdcfg);
+ break;
+ case 4:
+ case 6:
+ case 8:
+ case 12:
+ case 14:
+ case 16:
+ case 17:
+ case 19:
+ case 20:
+ /* SD3(4:7) => SLOT6(0:3) */
+ brdcfg = QIXIS_READ(brdcfg[12]);
+ brdcfg &= ~BRDCFG12_SD3MX_MASK;
+ brdcfg |= BRDCFG12_SD3MX_SLOT6;
+ QIXIS_WRITE(brdcfg[12], brdcfg);
+ break;
+ default:
+ printf("WARNING: unsupported for SerDes3 Protocol %d\n",
+ srds_prtcl_s3);
+ return -1;
+ }
+
+ srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
+ srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
+ switch (srds_prtcl_s4) {
+ case 0:
+ /* SerDes4 is not enabled */
+ break;
+ case 2:
+ /* 10b, SD4(0:7) => SLOT7(0:7) */
+ brdcfg = QIXIS_READ(brdcfg[12]);
+ brdcfg &= ~BRDCFG12_SD4MX_MASK;
+ brdcfg |= BRDCFG12_SD4MX_SLOT7;
+ QIXIS_WRITE(brdcfg[12], brdcfg);
+ break;
+ case 4:
+ case 6:
+ case 8:
+ /* x1b, SD4(4:7) => SLOT8(0:3) */
+ brdcfg = QIXIS_READ(brdcfg[12]);
+ brdcfg &= ~BRDCFG12_SD4MX_MASK;
+ brdcfg |= BRDCFG12_SD4MX_SLOT8;
+ QIXIS_WRITE(brdcfg[12], brdcfg);
+ break;
+ case 10:
+ case 12:
+ case 14:
+ case 16:
+ case 18:
+ /* 00b, SD4(4:5) => AURORA, SD4(6:7) => SATA */
+ brdcfg = QIXIS_READ(brdcfg[12]);
+ brdcfg &= ~BRDCFG12_SD4MX_MASK;
+ brdcfg |= BRDCFG12_SD4MX_AURO_SATA;
+ QIXIS_WRITE(brdcfg[12], brdcfg);
+ break;
+ default:
+ printf("WARNING: unsupported for SerDes4 Protocol %d\n",
+ srds_prtcl_s4);
+ return -1;
+ }
+
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+ const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+ const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+ /*
+ * Remap Boot flash + PROMJET region to caching-inhibited
+ * so that flash can be erased properly.
+ */
+
+ /* Flush d-cache and invalidate i-cache of any FLASH data */
+ flush_dcache();
+ invalidate_icache();
+
+ /* invalidate existing TLB entry for flash + promjet */
+ disable_tlb(flash_esel);
+
+ set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+ set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ setup_portals();
+#endif
+
+ /* Disable remote I2C connectoin */
+ QIXIS_WRITE(brdcfg[5], BRDCFG5_RESET);
+
+ /* Configure board SERDES ports crossbar */
+ config_frontside_crossbar_vsc3316();
+ config_backside_crossbar_mux();
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+
+ return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+ u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch (sysclk_conf & 0x0F) {
+ case QIXIS_SYSCLK_83:
+ return 83333333;
+ case QIXIS_SYSCLK_100:
+ return 100000000;
+ case QIXIS_SYSCLK_125:
+ return 125000000;
+ case QIXIS_SYSCLK_133:
+ return 133333333;
+ case QIXIS_SYSCLK_150:
+ return 150000000;
+ case QIXIS_SYSCLK_160:
+ return 160000000;
+ case QIXIS_SYSCLK_166:
+ return 166666666;
+ }
+ return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+ u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch ((ddrclk_conf & 0x30) >> 4) {
+ case QIXIS_DDRCLK_100:
+ return 100000000;
+ case QIXIS_DDRCLK_125:
+ return 125000000;
+ case QIXIS_DDRCLK_133:
+ return 133333333;
+ }
+ return 66666666;
+}
+
+static const char *serdes_clock_to_string(u32 clock)
+{
+ switch (clock) {
+ case SRDS_PLLCR0_RFCK_SEL_100:
+ return "100";
+ case SRDS_PLLCR0_RFCK_SEL_125:
+ return "125";
+ case SRDS_PLLCR0_RFCK_SEL_156_25:
+ return "156.25";
+ case SRDS_PLLCR0_RFCK_SEL_161_13:
+ return "161.1328125";
+ default:
+ return "???";
+ }
+}
+
+int misc_init_r(void)
+{
+ u8 sw;
+ serdes_corenet_t *srds_regs =
+ (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+ u32 actual[MAX_SERDES];
+ unsigned int i;
+
+ sw = QIXIS_READ(brdcfg[2]);
+ for (i = 0; i < MAX_SERDES; i++) {
+ unsigned int clock = (sw >> (2 * i)) & 3;
+ switch (clock) {
+ case 0:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
+ break;
+ case 1:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
+ break;
+ case 2:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
+ break;
+ case 3:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_161_13;
+ break;
+ }
+ }
+
+ for (i = 0; i < MAX_SERDES; i++) {
+ u32 pllcr0 = srds_regs->bank[i].pllcr0;
+ u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
+ if (expected != actual[i]) {
+ printf("Warning: SERDES%u expects reference clock"
+ " %sMHz, but actual is %sMHz\n", i + 1,
+ serdes_clock_to_string(expected),
+ serdes_clock_to_string(actual[i]));
+ }
+ }
+
+ return 0;
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ phys_addr_t base;
+ phys_size_t size;
+
+ ft_cpu_setup(blob, bd);
+
+ base = getenv_bootm_low();
+ size = getenv_bootm_size();
+
+ fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCI
+ pci_of_setup(blob, bd);
+#endif
+
+ fdt_fixup_liodn(blob);
+ fdt_fixup_dr_usb(blob, bd);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ fdt_fixup_fman_ethernet(blob);
+ fdt_fixup_board_enet(blob);
+#endif
+}
--- /dev/null
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CORENET_DS_H__
+#define __CORENET_DS_H__
+
+void fdt_fixup_board_enet(void *blob);
+void pci_of_setup(void *blob, bd_t *bd);
+
+static const int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7},
+ {8, 8}, {9, 9}, {14, 14}, {15, 15} };
+
+static const int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5},
+ {10, 10}, {11, 11}, {12, 12}, {13, 13} };
+
+static const int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4},
+ {10, 11}, {11, 10}, {12, 2}, {13, 3} };
+
+static const int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6},
+ {8, 9}, {9, 8}, {14, 1}, {15, 0} };
+#endif
--- /dev/null
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /* TLB 1 */
+ /* *I*** - Covers boot page */
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
+ /*
+ * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
+ * SRAM is at 0xfff00000, it covered the 0xfffff000.
+ */
+ SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_1M, 1),
+#else
+ SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_4K, 1),
+#endif
+
+ /* *I*G* - CCSRBAR */
+ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_16M, 1),
+
+ /* *I*G* - Flash, localbus */
+ /* This will be changed to *I*G* after relocation to RAM. */
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /* *I*G* - PCI */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_1G, 1),
+
+ /* *I*G* - PCI */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000,
+ CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000,
+ CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_256M, 1),
+
+ /* *I*G* - PCI I/O */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 6, BOOKE_PAGESZ_256K, 1),
+
+ /* Bman/Qman */
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+ SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 9, BOOKE_PAGESZ_16M, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
+ CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 10, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+ SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 11, BOOKE_PAGESZ_16M, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
+ CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 12, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+ SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 13, BOOKE_PAGESZ_4M, 1),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE
+ /*
+ * *I*G - NAND
+ * entry 14 and 15 has been used hard coded, they will be disabled
+ * in cpu_init_f, so we use entry 16 for nand.
+ */
+ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 16, BOOKE_PAGESZ_1M, 1),
+#endif
+ SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 17, BOOKE_PAGESZ_4K, 1),
+
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
/* CMD Table */
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
+
. = ALIGN(4);
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
.data :
{
/* CMD Table */
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
+
. = ALIGN(4);
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
.data :
{
/* CMD Table */
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
+
. = ALIGN(4);
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
.data :
{
/* CMD Table */
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
+
. = ALIGN(4);
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
.data :
{
/* CMD Table */
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
+
. = ALIGN(4);
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
.data :
{
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# h2200 Support
#
-# See file CREDITS for list of people who contributed to this
-# project.
+# Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
LIB = $(obj)lib$(BOARD).o
-COBJS = $(BOARD).o flash.o atm.o
+COBJS := h2200.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+SRCS := $(COBJS:.o=.c) h2200-header.S
OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
+
+all: $(LIB) $(obj)h2200-header.bin
+
+$(obj)h2200-header.o: h2200-header.S
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+$(obj)h2200-header.bin: $(obj)h2200-header.o
+ $(OBJCOPY) -O binary $< $@
$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
--- /dev/null
+/*
+ * iPAQ h2200 header
+ *
+ * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+ .word 0xea0003fe /* b 0x1000 */
+
+ .org 0x40
+ .ascii "ECEC"
+
+ .org 0x1000 - 1
+ .byte 0x0
--- /dev/null
+/*
+ * iPAQ h2200 board configuration
+ *
+ * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/pxa.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ /* We have RAM, disable cache */
+ dcache_disable();
+ icache_disable();
+
+ gd->bd->bi_arch_number = MACH_TYPE_H2200;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = 0xa0000100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ /*
+ * Everything except MSC0 was already set up by
+ * 1st stage bootloader.
+ *
+ * This setting enables access to companion chip.
+ */
+ clrsetbits_le32(MSC0, 0xffffffff, CONFIG_SYS_MSC0_VAL);
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+ return 0;
+}
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/omap_gpio.h>
+#include <asm/arch/dss.h>
+#include <asm/arch/clocks.h>
#include "errno.h"
#include <i2c.h>
#ifdef CONFIG_USB_EHCI
DECLARE_GLOBAL_DATA_PTR;
-#define HOT_WATER_BUTTON 38
+#define HOT_WATER_BUTTON 42
+#define LCD_OUTPUT 55
+
+/* Address of the framebuffer in RAM. */
+#define FB_START_ADDRESS 0x88000000
#ifdef CONFIG_USB_EHCI
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
};
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+ gpio_direction_output(LCD_OUTPUT, 0);
+
return 0;
}
return 0;
setenv("bootcmd", "run swupdate");
+
return 0;
}
#endif
}
#endif
-#ifdef CONFIG_USB_EHCI_OMAP
-#define USB_HOST_PWR_EN 132
-int board_usb_init(void)
+#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
+
+static struct panel_config lcd_cfg = {
+ .timing_h = PANEL_TIMING_H(40, 40, 48),
+ .timing_v = PANEL_TIMING_V(29, 13, 3),
+ .pol_freq = 0x00003000, /* Pol Freq */
+ .divisor = 0x0001000E,
+ .panel_type = 0x01, /* TFT */
+ .data_lines = 0x03, /* 24 Bit RGB */
+ .load_mode = 0x02, /* Frame Mode */
+ .panel_color = 0,
+ .lcd_size = PANEL_LCD_SIZE(800, 480),
+};
+
+int board_video_init(void)
{
- if (gpio_request(USB_HOST_PWR_EN, "USB_HOST_PWR_EN") < 0) {
- puts("Failed to get USB_HOST_PWR_EN pin\n");
- return -ENODEV;
- }
- gpio_direction_output(USB_HOST_PWR_EN, 1);
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ void *fb;
+
+ fb = (void *)FB_START_ADDRESS;
+
+ lcd_cfg.frame_buffer = fb;
+
+ setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
+ setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
+
+ omap3_dss_panel_config(&lcd_cfg);
+ omap3_dss_enable();
return 0;
}
MUX_VAL(CP(GPMC_A7), (IEN | PTU | EN | M4)) \
MUX_VAL(CP(GPMC_A8), (IEN | PTU | EN | M4)) \
MUX_VAL(CP(GPMC_A9), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(GPMC_A10), (IDIS | PTU | DIS | M4)) \
+ MUX_VAL(CP(GPMC_A10), (IEN | PTU | EN | M4)) \
/* GPIO_43 LCD buffer enable */ \
MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \
MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \
MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA0), (IEN | PTU | EN | M4))\
- MUX_VAL(CP(DSS_DATA1), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA2), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA8), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA9), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(DSS_DATA16), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA17), (IEN | PTU | EN | M4)) \
- MUX_VAL(CP(DSS_DATA18), (IEN | PTU | EN | M4)) \
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \
- MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \
MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \
/* CAMERA */\
MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \
MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \
MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \
+ MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M4)) \
+ /* GPIO_170 Touchscreen ISR */\
/* McSPI */\
MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \
MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \
/* HECC */\
- MUX_VAL(CP(HECC1_TXD), (IEN | PTD | EN | M4)) \
- MUX_VAL(CP(HECC1_RXD), (IEN | PTD | EN | M4)) \
+ MUX_VAL(CP(HECC1_TXD), (IEN | PTD | EN | M0)) \
+ MUX_VAL(CP(HECC1_RXD), (IEN | PTD | EN | M0)) \
/* HSUSB */\
MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \
- MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \
+ MUX_VAL(CP(HSUSB0_STP), (IEN | PTU | DIS | M0)) \
MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \
MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
.sdata : { *(.sdata*) }
- .u_boot_cmd : {
- __u_boot_cmd_start = .;
- *(.u_boot_cmd)
- __u_boot_cmd_end = .;
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
}
uboot_end_data = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
void ide_set_reset (int on)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ int i;
/*
* Configure PC for IDE Reset Pin
*/
if (on) { /* assert RESET */
immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_IDE_RESET);
+
+#ifdef CONFIG_SYS_PB_12V_ENABLE
+ /* 12V Enable output OFF */
+ immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_12V_ENABLE);
+
+ immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_12V_ENABLE);
+ immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_12V_ENABLE);
+ immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_12V_ENABLE;
+
+ /* wait 500 ms for the voltage to stabilize */
+ for (i = 0; i < 500; ++i)
+ udelay(1000);
+#endif /* CONFIG_SYS_PB_12V_ENABLE */
} else { /* release RESET */
+#ifdef CONFIG_SYS_PB_12V_ENABLE
+ /* 12V Enable output ON */
+ immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_12V_ENABLE;
+#endif /* CONFIG_SYS_PB_12V_ENABLE */
+
+#ifdef CONFIG_SYS_PB_IDE_MOTOR
+ /* configure IDE Motor voltage monitor pin as input */
+ immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_IDE_MOTOR);
+ immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_IDE_MOTOR);
+ immr->im_cpm.cp_pbdir &= ~(CONFIG_SYS_PB_IDE_MOTOR);
+
+/* wait up to 1 s for the motor voltage to stabilize */
+ for (i = 0; i < 1000; ++i) {
+ if ((immr->im_cpm.cp_pbdat
+ & CONFIG_SYS_PB_IDE_MOTOR) != 0)
+ break;
+ udelay(1000);
+ }
+
+ if (i == 1000) { /* Timeout */
+ printf("\nWarning: 5V for IDE Motor missing\n");
+#ifdef CONFIG_STATUS_LED
+#ifdef STATUS_LED_YELLOW
+ status_led_set(STATUS_LED_YELLOW, STATUS_LED_ON);
+#endif
+#ifdef STATUS_LED_GREEN
+ status_led_set(STATUS_LED_GREEN, STATUS_LED_OFF);
+#endif
+#endif /* CONFIG_STATUS_LED */
+ }
+#endif /* CONFIG_SYS_PB_IDE_MOTOR */
+
immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_IDE_RESET;
}
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
{5, 2, 1, 0, 1}, /* UART2_RTS */
{5, 3, 2, 0, 2}, /* UART2_SIN */
{5, 1, 2, 0, 3}, /* UART2_CTS */
-#else
+#elif !defined(CONFIG_MPC8309)
/* Local Bus */
{0, 16, 1, 0, 3}, /* LA00 */
{0, 17, 1, 0, 3}, /* LA01 */
#define SMSTPCR1_CMT0 (1 << 24)
#define SMSTPCR1_I2C0 (1 << 16)
#define SMSTPCR3_USB (1 << 22)
+#define SMSTPCR3_I2C1 (1 << 23)
#define PORT32CR (0xE6051020)
#define PORT33CR (0xE6051021)
clrbits_le32(&cpg->smstpcr1, (SMSTPCR1_CMT0|SMSTPCR1_I2C0));
clrbits_le32(&cpg_srcr->srcr1, (SMSTPCR1_CMT0|SMSTPCR1_I2C0));
- clrbits_le32(&cpg->smstpcr3, SMSTPCR3_USB);
- clrbits_le32(&cpg_srcr->srcr3, SMSTPCR3_USB);
+ clrbits_le32(&cpg->smstpcr3, (SMSTPCR3_USB|SMSTPCR3_I2C1));
+ clrbits_le32(&cpg_srcr->srcr3, (SMSTPCR3_USB|SMSTPCR3_I2C1));
writel(VCLKCR1_D, &cpg->vclkcr1);
/* Setup SCIF4 / workaround */
gpio_direction_output(GPIO_PORT15, 1);
/* I2C */
+ gpio_request(GPIO_FN_PORT237_I2C_SCL2, NULL);
+ gpio_request(GPIO_FN_PORT236_I2C_SDA2, NULL);
gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
+++ /dev/null
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Derived from ../tqm8xx/flash.c
- * [Torsten Stevens, FHG IMS; Bruno Achauer, Exet AG]
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_FLASH
-
-#ifdef DEBUG_FLASH
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size_b0, size_b1;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
-
- size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0: "
- "ID 0x%lx, Size = 0x%08lx = %ld MB\n",
- flash_info[0].flash_id,
- size_b0, size_b0<<20);
- }
-
- DEBUGF("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE5_PRELIM);
-
- size_b1 = flash_get_size((vu_long *)FLASH_BASE5_PRELIM, &flash_info[1]);
-
- DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
- if (size_b1 > size_b0) {
- printf ("## ERROR: "
- "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
- size_b1, size_b1<<20,
- size_b0, size_b0<<20
- );
- flash_info[0].flash_id = FLASH_UNKNOWN;
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[0].sector_count = -1;
- flash_info[1].sector_count = -1;
- flash_info[0].size = 0;
- flash_info[1].size = 0;
- return (0);
- }
-
- DEBUGF ("## Before remap: "
- "BR0: 0x%08x OR0: 0x%08x "
- "BR1: 0x%08x OR1: 0x%08x\n",
- memctl->memc_br0, memctl->memc_or0,
- memctl->memc_br1, memctl->memc_or1);
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | \
- BR_MS_GPCM | BR_PS_32 | BR_V;
-
- DEBUGF("## BR0: 0x%08x OR0: 0x%08x\n",
- memctl->memc_br0, memctl->memc_or0);
-
- /* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_info[0].size = size_b0;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
- &flash_info[0]);
-#endif
-
- if (size_b1) {
- memctl->memc_or5 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
- memctl->memc_br5 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
- BR_MS_GPCM | BR_PS_32 | BR_V;
-
- DEBUGF("## BR5: 0x%08x OR5: 0x%08x\n",
- memctl->memc_br5, memctl->memc_or5);
-
- /* Re-do sizing to get full correct info */
- size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
- &flash_info[1]);
-
- flash_info[1].size = size_b1;
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[1]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
- &flash_info[1]);
-#endif
- } else {
- memctl->memc_br5 = 0; /* invalidate bank */
- memctl->memc_or5 = 0; /* invalidate bank */
-
- DEBUGF("## DISABLE BR5: 0x%08x OR5: 0x%08x\n",
- memctl->memc_br5, memctl->memc_or5);
-
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
- flash_info[1].size = 0;
- }
-
- DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
- return (size_b0 + size_b1);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- ulong value;
- ulong base = (ulong)addr;
-
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00900090;
-
- value = addr[0];
-
- switch (value) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- value = addr[1]; /* device ID */
-
- switch (value) {
- case AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#if 0 /* enable when device IDs are available */
- case AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr = (volatile unsigned long *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr = (volatile unsigned long *)info->start[0];
-
- *addr = 0x00F000F0; /* reset bank */
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_long*)(info->start[sect]);
- addr[0] = 0x00300030;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_long*)(info->start[l_sect]);
- while ((addr[0] & 0x00800080) != 0x00800080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
- addr[0] = 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00A000A0;
-
- *((vu_long *)dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
+++ /dev/null
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2001
- * Torsten Stevens, FHG IMS, stevens@ims.fhg.de
- * Bruno Achauer, Exet AG, bruno@exet-ag.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Derived from ../tqm8xx/tqm8xx.c
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-const uint sdram_table[] = {
- /*
- * Single Read. (Offset 0 in UPMA RAM)
- */
- 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
- 0x1ff77c47, /* last */
- /*
- * SDRAM Initialization (offset 5 in UPMA RAM)
- *
- * This is no UPM entry point. The following definition uses
- * the remaining space to establish an initialization
- * sequence, which is executed by a RUN command.
- *
- */
- 0x1ff77c35, 0xefeabc34, 0x1fb57c35, /* last */
- /*
- * Burst Read. (Offset 8 in UPMA RAM)
- */
- 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
- 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Single Write. (Offset 18 in UPMA RAM)
- */
- 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Burst Write. (Offset 20 in UPMA RAM)
- */
- 0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
- 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, /* last */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Refresh (Offset 30 in UPMA RAM)
- */
- 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- 0xfffffc84, 0xfffffc07, 0xfffffc07, /* last */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Exception. (Offset 3c in UPMA RAM)
- */
- 0x7ffffc07, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- *
- * Test TQ ID string (TQM8xx...)
- * If present, check for "L" type (no second DRAM bank),
- * otherwise "L" type is assumed as default.
- *
- * Return 1 for "L" type, 0 else.
- */
-
-int checkboard (void)
-{
- printf ("Board: Lantec special edition rev.%d\n", CONFIG_LANTEC);
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- long int size_b0;
- int i;
-
- /*
- * Configure UPMA for SDRAM
- */
- upmconfig (UPMA, (uint *) sdram_table,
- sizeof (sdram_table) / sizeof (uint));
-
- memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K /* XXX CONFIG_SYS_MPTPR XXX */ ;
-
- /* burst length=4, burst type=sequential, CAS latency=2 */
- memctl->memc_mar = 0x00000088;
-
- /*
- * Map controller bank 3 to the SDRAM bank at preliminary address.
- */
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-
- /* initialize memory address register */
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; /* refresh not enabled yet */
-
- /* mode initialization (offset 5) */
- udelay (200); /* 0x80006105 */
- memctl->memc_mcr =
- MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x05);
-
- /* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */
- udelay (1); /* 0x80006130 */
- memctl->memc_mcr =
- MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30);
- udelay (1); /* 0x80006130 */
- memctl->memc_mcr =
- MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30);
-
- udelay (1); /* 0x80006106 */
- memctl->memc_mcr =
- MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06);
-
- memctl->memc_mamr |= MAMR_PTAE; /* refresh enabled */
-
- udelay (200);
-
- /* Need at least 10 DRAM accesses to stabilize */
- for (i = 0; i < 10; ++i) {
- volatile unsigned long *addr =
- (volatile unsigned long *) SDRAM_BASE3_PRELIM;
- unsigned long val;
-
- val = *(addr + i);
- *(addr + i) = val;
- }
-
- /*
- * Check Bank 0 Memory Size for re-configuration
- */
- size_b0 = dram_size (CONFIG_SYS_MAMR_8COL,
- (long *) SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
-
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL | MAMR_PTAE;
-
- /*
- * Final mapping:
- */
-
- memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
- memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
- udelay (1000);
-
- return (size_b0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
- long int maxsize)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- memctl->memc_mamr = mamr_value;
-
- return (get_ram_size (base, maxsize));
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- net/libnet.o (.text*)
- arch/powerpc/lib/libpowerpc.o (.text*)
- drivers/rtc/librtc.o (.text*)
-
- . = env_offset;
- common/env_embedded.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
#define IT8212_PCI_IdeBusSkewCONTROL 0x4c
#define IT8212_PCI_IdeDrivingCURRENT 0x42
-extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
extern struct pci_controller hose;
int ide_preinit (void)
#include <netdev.h>
#include <asm/arch/pxa.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/regs-mmc.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+ pxa_mmc_register(0);
+ return 0;
+}
+#endif
+
int board_late_init(void)
{
setenv("stdout", "serial");
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
.sdata : { *(.sdata*) }
. = ALIGN(4);
- .u_boot_cmd : {
- __u_boot_cmd_start = .;
- *(.u_boot_cmd)
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include <u-boot.lst>
}
. = ALIGN(4);
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
} > ram
*/
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) } > ram
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
#
-# (C) Copyright 2001-2006
+# (C) Copyright 2000, 2001, 2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
LIB = $(obj)lib$(BOARD).o
-COBJS = $(BOARD).o flash.o pcmcia.o
+COBJS-y := $(BOARD).o
+SOBJS-y := lowlevel_init.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
+COBJS := $(sort $(COBJS-y))
+SOBJS := $(sort $(SOBJS-y))
+SRCS := $(COBJS:.o=.c) $(SOBJS:.o=.S)
+OBJS := $(addprefix $(obj),$(COBJS)) $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
--- /dev/null
+/*
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+relocaddr: /* address of this relocaddr section after coping */
+ .word . /* address of section (calculated at compile time) */
+
+startaddr: /* address of u-boot after copying */
+ .word CONFIG_SYS_TEXT_BASE
+
+kernaddr: /* address of kernel after copying */
+ .word KERNEL_ADDRESS
+
+kernsize: /* maximal size of kernel image */
+ .word KERNEL_MAXSIZE
+
+kernoffs: /* offset of kernel image in loaded u-boot */
+ .word KERNEL_OFFSET
+
+imagesize: /* maximal size of image */
+ .word IMAGE_MAXSIZE
+
+ih_magic: /* IH_MAGIC in big endian from include/image.h */
+ .word 0x56190527
+
+/*
+ * Routine: save_boot_params (called after reset from start.S)
+ * Description: Copy attached kernel to address KERNEL_ADDRESS
+ * Copy u-boot to address CONFIG_SYS_TEXT_BASE
+ * Return to copied u-boot address
+ */
+
+.global save_boot_params
+save_boot_params:
+
+
+/* Copy valid attached kernel to address KERNEL_ADDRESS */
+
+copy_kernel_start:
+ adr r0, relocaddr /* r0 - address of section relocaddr */
+ ldr r1, relocaddr /* r1 - address of relocaddr after relocation */
+ cmp r0, r1
+
+ /* r4 - calculated offset */
+ subhi r4, r0, r1
+ sublo r4, r1, r0
+
+ /* r0 - start of kernel before */
+ ldr r0, startaddr
+ addhi r0, r0, r4
+ sublo r0, r0, r4
+ ldr r1, kernoffs
+ add r0, r0, r1
+
+ /* r3 - start of kernel after */
+ ldr r3, kernaddr
+
+ /* r2 - end of kernel after */
+ ldr r1, kernsize
+ add r2, r3, r1
+
+ /* r1 - end of kernel before */
+ add r1, r0, r1
+
+ /* remove header in target kernel */
+ mov r5, #0
+ str r5, [r3]
+
+ /* check for valid kernel uImage */
+ ldr r4, [r0] /* r4 - 4 bytes header of kernel */
+ ldr r5, ih_magic /* r5 - IH_MAGIC */
+ cmp r4, r5
+ bne copy_kernel_end /* skip if invalid image */
+
+copy_kernel_loop:
+ ldmdb r1!, {r3 - r10}
+ stmdb r2!, {r3 - r10}
+ cmp r1, r0
+ bhi copy_kernel_loop
+
+copy_kernel_end:
+ mov r5, #0
+ str r5, [r0] /* remove 4 bytes header of kernel */
+
+
+/* Fix u-boot code */
+
+fix_start:
+ adr r0, relocaddr /* r0 - address of section relocaddr */
+ ldr r1, relocaddr /* r1 - address of relocaddr after relocation */
+ cmp r0, r1
+
+ beq copy_uboot_end /* skip if u-boot is on correct address */
+
+ /* r5 - calculated offset */
+ subhi r5, r0, r1
+ sublo r5, r1, r0
+
+ /* r6 - maximal u-boot size */
+ ldr r6, imagesize
+
+ /* fix return address */
+ subhi lr, lr, r5
+ addlo lr, lr, r5
+
+ /* r1 - start of u-boot after */
+ ldr r1, startaddr
+
+ /* r0 - start of u-boot before */
+ addhi r0, r1, r5
+ sublo r0, r1, r5
+
+ /* check if we need to move uboot copy code before calling it */
+ cmp r5, r6
+ bhi copy_uboot_start /* now coping u-boot code directly is safe */
+
+
+copy_code_start:
+ /* r0 - start of u-boot before */
+ /* r1 - start of u-boot after */
+ /* r6 - maximal u-boot size */
+
+ /* r7 - maximal kernel size */
+ ldr r7, kernsize
+
+ /* r4 - end of kernel before */
+ add r4, r0, r6
+ add r4, r4, r7
+
+ /* r5 - end of u-boot after */
+ ldr r5, startaddr
+ add r5, r5, r6
+
+ /* r2 - start of loop code after */
+ cmp r4, r5 /* higher address (r4 or r5) */
+ movhs r2, r4
+ movlo r2, r5
+
+ /* r3 - end of loop code before */
+ adr r3, end
+
+ /* r4 - end of loop code after */
+ adr r4, copy_uboot_start
+ sub r4, r3, r4
+ add r4, r2, r4
+
+copy_code_loop:
+ ldmdb r3!, {r7 - r10}
+ stmdb r4!, {r7 - r10}
+ cmp r4, r2
+ bhi copy_code_loop
+
+copy_code_end:
+ mov pc, r2
+
+
+/* Copy u-boot to address CONFIG_SYS_TEXT_BASE */
+
+copy_uboot_start:
+ /* r0 - start of u-boot before */
+ /* r1 - start of u-boot after */
+ /* r6 - maximal u-boot size */
+
+ /* r2 - end of u-boot after */
+ add r2, r1, r6
+
+ /* condition for copying from left to right */
+ cmp r0, r1
+ addlo r1, r0, r6 /* r1 - end of u-boot before */
+ blo copy_uboot_loop_right
+
+copy_uboot_loop_left:
+ ldmia r0!, {r3 - r10}
+ stmia r1!, {r3 - r10}
+ cmp r1, r2
+ blo copy_uboot_loop_left
+ b copy_uboot_end
+
+copy_uboot_loop_right:
+ ldmdb r1!, {r3 - r10}
+ stmdb r2!, {r3 - r10}
+ cmp r1, r0
+ bhi copy_uboot_loop_right
+
+copy_uboot_end:
+ bx lr
+
+end:
--- /dev/null
+/*
+ * (C) Copyright 2012
+ * Ивайло Димитров <freemangordon@abv.bg>
+ *
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2010
+ * Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code:
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ * Sunil Kumar <sunilsaini05@gmail.com>
+ * Shashi Ranjan <shashiranjanmca05@gmail.com>
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <malloc.h>
+#include <twl4030.h>
+#include <i2c.h>
+#include <video_fb.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/bitops.h>
+#include <asm/mach-types.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+
+#include "rx51.h"
+#include "tag_omap.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+GraphicDevice gdev;
+
+const omap3_sysinfo sysinfo = {
+ DDR_STACKED,
+ "Nokia RX-51",
+ "OneNAND"
+};
+
+/* This structure contains default omap tags needed for booting Maemo 5 */
+static struct tag_omap omap[] = {
+ OMAP_TAG_UART_CONFIG(0x04),
+ OMAP_TAG_SERIAL_CONSOLE_CONFIG(0x03, 0x01C200),
+ OMAP_TAG_LCD_CONFIG("acx565akm", "internal", 90, 0x18),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cam_focus", 0x44, 0x1, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cam_launch", 0x45, 0x1, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cam_shutter", 0x6e, 0x1, 0x0, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_apeslpx", 0x46, 0x2, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_bsi", 0x9d, 0x2, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_en", 0x4a, 0x2, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst", 0x4b, 0x6, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst_rq", 0x49, 0x6, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_wddis", 0x0d, 0x2, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("headphone", 0xb1, 0x1, 0x1, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("kb_lock", 0x71, 0x1, 0x0, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("proximity", 0x59, 0x0, 0x0, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("sleep_ind", 0xa2, 0x2, 0x2, 0x0),
+ OMAP_TAG_GPIO_SWITCH_CONFIG("slide", GPIO_SLIDE, 0x0, 0x0, 0x0),
+ OMAP_TAG_WLAN_CX3110X_CONFIG(0x25, 0xff, 87, 42, -1),
+ OMAP_TAG_PARTITION_CONFIG(PART1_NAME, PART1_SIZE * PART1_MULL,
+ PART1_OFFS, PART1_MASK),
+ OMAP_TAG_PARTITION_CONFIG(PART2_NAME, PART2_SIZE * PART2_MULL,
+ PART2_OFFS, PART2_MASK),
+ OMAP_TAG_PARTITION_CONFIG(PART3_NAME, PART3_SIZE * PART3_MULL,
+ PART3_OFFS, PART3_MASK),
+ OMAP_TAG_PARTITION_CONFIG(PART4_NAME, PART4_SIZE * PART4_MULL,
+ PART4_OFFS, PART4_MASK),
+ OMAP_TAG_PARTITION_CONFIG(PART5_NAME, PART5_SIZE * PART5_MULL,
+ PART5_OFFS, PART5_MASK),
+ OMAP_TAG_PARTITION_CONFIG(PART6_NAME, PART6_SIZE * PART6_MULL,
+ PART6_OFFS, PART6_MASK),
+ OMAP_TAG_BOOT_REASON_CONFIG("pwr_key"),
+ OMAP_TAG_VERSION_STR_CONFIG("product", "RX-51"),
+ OMAP_TAG_VERSION_STR_CONFIG("hw-build", "2101"),
+ OMAP_TAG_VERSION_STR_CONFIG("nolo", "1.4.14"),
+ OMAP_TAG_VERSION_STR_CONFIG("boot-mode", "normal"),
+ { }
+};
+
+static char *boot_reason_ptr;
+static char *hw_build_ptr;
+static char *nolo_version_ptr;
+static char *boot_mode_ptr;
+
+/*
+ * Routine: init_omap_tags
+ * Description: Initialize pointers to values in tag_omap
+ */
+static void init_omap_tags(void)
+{
+ char *component;
+ char *version;
+ int i = 0;
+ while (omap[i].hdr.tag) {
+ switch (omap[i].hdr.tag) {
+ case OMAP_TAG_BOOT_REASON:
+ boot_reason_ptr = omap[i].u.boot_reason.reason_str;
+ break;
+ case OMAP_TAG_VERSION_STR:
+ component = omap[i].u.version.component;
+ version = omap[i].u.version.version;
+ if (strcmp(component, "hw-build") == 0)
+ hw_build_ptr = version;
+ else if (strcmp(component, "nolo") == 0)
+ nolo_version_ptr = version;
+ else if (strcmp(component, "boot-mode") == 0)
+ boot_mode_ptr = version;
+ break;
+ default:
+ break;
+ }
+ i++;
+ }
+}
+
+static void reuse_omap_atags(struct tag_omap *t)
+{
+ char *component;
+ char *version;
+ while (t->hdr.tag) {
+ switch (t->hdr.tag) {
+ case OMAP_TAG_BOOT_REASON:
+ memset(boot_reason_ptr, 0, 12);
+ strcpy(boot_reason_ptr, t->u.boot_reason.reason_str);
+ break;
+ case OMAP_TAG_VERSION_STR:
+ component = t->u.version.component;
+ version = t->u.version.version;
+ if (strcmp(component, "hw-build") == 0) {
+ memset(hw_build_ptr, 0, 12);
+ strcpy(hw_build_ptr, version);
+ } else if (strcmp(component, "nolo") == 0) {
+ memset(nolo_version_ptr, 0, 12);
+ strcpy(nolo_version_ptr, version);
+ } else if (strcmp(component, "boot-mode") == 0) {
+ memset(boot_mode_ptr, 0, 12);
+ strcpy(boot_mode_ptr, version);
+ }
+ break;
+ default:
+ break;
+ }
+ t = tag_omap_next(t);
+ }
+}
+
+/*
+ * Routine: reuse_atags
+ * Description: Reuse atags from previous bootloader.
+ * Reuse only only HW build, boot reason, boot mode and nolo
+ */
+static void reuse_atags(void)
+{
+ struct tag *t = (struct tag *)gd->bd->bi_boot_params;
+
+ /* First tag must be ATAG_CORE */
+ if (t->hdr.tag != ATAG_CORE)
+ return;
+
+ if (!boot_reason_ptr || !hw_build_ptr)
+ return;
+
+ /* Last tag must be ATAG_NONE */
+ while (t->hdr.tag != ATAG_NONE) {
+ switch (t->hdr.tag) {
+ case ATAG_REVISION:
+ memset(hw_build_ptr, 0, 12);
+ sprintf(hw_build_ptr, "%x", t->u.revision.rev);
+ break;
+ case ATAG_BOARD:
+ reuse_omap_atags((struct tag_omap *)&t->u);
+ break;
+ default:
+ break;
+ }
+ t = tag_next(t);
+ }
+}
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+ /* in SRAM or SDRAM, finish GPMC */
+ gpmc_init();
+ /* boot param addr */
+ gd->bd->bi_boot_params = OMAP34XX_SDRC_CS0 + 0x100;
+ return 0;
+}
+
+/*
+ * Routine: get_board_revision
+ * Description: Return board revision.
+ */
+u32 get_board_rev(void)
+{
+ return simple_strtol(hw_build_ptr, NULL, 16);
+}
+
+/*
+ * Routine: setup_board_tags
+ * Description: Append board specific boot tags.
+ */
+void setup_board_tags(struct tag **in_params)
+{
+ int setup_console_atag;
+ char *setup_boot_reason_atag;
+ char *setup_boot_mode_atag;
+ char *str;
+ int i;
+ int size;
+ int total_size;
+ struct tag *params;
+ struct tag_omap *t;
+
+ params = (struct tag *)gd->bd->bi_boot_params;
+
+ params->u.core.flags = 0x0;
+ params->u.core.pagesize = 0x1000;
+ params->u.core.rootdev = 0x0;
+
+ /* append omap atag only if env setup_omap_atag is set to 1 */
+ str = getenv("setup_omap_atag");
+ if (!str || str[0] != '1')
+ return;
+
+ str = getenv("setup_console_atag");
+ if (str && str[0] == '1')
+ setup_console_atag = 1;
+ else
+ setup_console_atag = 0;
+
+ setup_boot_reason_atag = getenv("setup_boot_reason_atag");
+ setup_boot_mode_atag = getenv("setup_boot_mode_atag");
+
+ params = *in_params;
+ t = (struct tag_omap *)¶ms->u;
+ total_size = sizeof(struct tag_header);
+
+ for (i = 0; omap[i].hdr.tag; i++) {
+
+ /* skip serial console tag */
+ if (!setup_console_atag &&
+ omap[i].hdr.tag == OMAP_TAG_SERIAL_CONSOLE)
+ continue;
+
+ size = omap[i].hdr.size + sizeof(struct tag_omap_header);
+ memcpy(t, &omap[i], size);
+
+ /* set uart tag to 0 - disable serial console */
+ if (!setup_console_atag && omap[i].hdr.tag == OMAP_TAG_UART)
+ t->u.uart.enabled_uarts = 0;
+
+ /* change boot reason */
+ if (setup_boot_reason_atag &&
+ omap[i].hdr.tag == OMAP_TAG_BOOT_REASON) {
+ memset(t->u.boot_reason.reason_str, 0, 12);
+ strcpy(t->u.boot_reason.reason_str,
+ setup_boot_reason_atag);
+ }
+
+ /* change boot mode */
+ if (setup_boot_mode_atag &&
+ omap[i].hdr.tag == OMAP_TAG_VERSION_STR &&
+ strcmp(omap[i].u.version.component, "boot-mode") == 0) {
+ memset(t->u.version.version, 0, 12);
+ strcpy(t->u.version.version, setup_boot_mode_atag);
+ }
+
+ total_size += size;
+ t = tag_omap_next(t);
+
+ }
+
+ params->hdr.tag = ATAG_BOARD;
+ params->hdr.size = total_size >> 2;
+ params = tag_next(params);
+
+ *in_params = params;
+}
+
+/*
+ * Routine: video_hw_init
+ * Description: Set up the GraphicDevice depending on sys_boot.
+ */
+void *video_hw_init(void)
+{
+ /* fill in Graphic Device */
+ gdev.frameAdrs = 0x8f9c0000;
+ gdev.winSizeX = 800;
+ gdev.winSizeY = 480;
+ gdev.gdfBytesPP = 2;
+ gdev.gdfIndex = GDF_16BIT_565RGB;
+ memset((void *)gdev.frameAdrs, 0, 0xbb800);
+ return (void *) &gdev;
+}
+
+/*
+ * Routine: twl4030_regulator_set_mode
+ * Description: Set twl4030 regulator mode over i2c powerbus.
+ */
+static void twl4030_regulator_set_mode(u8 id, u8 mode)
+{
+ u16 msg = MSG_SINGULAR(DEV_GRP_P1, id, mode);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg >> 8,
+ TWL4030_PM_MASTER_PB_WORD_MSB);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg & 0xff,
+ TWL4030_PM_MASTER_PB_WORD_LSB);
+}
+
+static void omap3_emu_romcode_call(u32 service_id, u32 *parameters)
+{
+ u32 i, num_params = *parameters;
+ u32 *sram_scratch_space = (u32 *)OMAP3_PUBLIC_SRAM_SCRATCH_AREA;
+
+ /*
+ * copy the parameters to an un-cached area to avoid coherency
+ * issues
+ */
+ for (i = 0; i < num_params; i++) {
+ __raw_writel(*parameters, sram_scratch_space);
+ parameters++;
+ sram_scratch_space++;
+ }
+
+ /* Now make the PPA call */
+ do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA);
+}
+
+/*
+ * Routine: omap3_update_aux_cr_secure_rx51
+ * Description: Modify the contents Auxiliary Control Register.
+ * Parameters:
+ * set_bits - bits to set in ACR
+ * clr_bits - bits to clear in ACR
+ */
+static void omap3_update_aux_cr_secure_rx51(u32 set_bits, u32 clear_bits)
+{
+ struct emu_hal_params_rx51 emu_romcode_params = { 0, };
+ u32 acr;
+
+ /* Read ACR */
+ asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+ acr &= ~clear_bits;
+ acr |= set_bits;
+
+ emu_romcode_params.num_params = 2;
+ emu_romcode_params.param1 = acr;
+
+ omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR,
+ (u32 *)&emu_romcode_params);
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure board specific parts.
+ */
+int misc_init_r(void)
+{
+ char buf[12];
+ u8 state;
+
+ /* reset lp5523 led */
+ i2c_set_bus_num(1);
+ state = 0xff;
+ i2c_write(0x32, 0x3d, 1, &state, 1);
+ i2c_set_bus_num(0);
+
+ /* initialize twl4030 power managment */
+ twl4030_power_init();
+
+ /* set VSIM to 1.8V */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED,
+ TWL4030_PM_RECEIVER_VSIM_VSEL_18,
+ TWL4030_PM_RECEIVER_VSIM_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
+
+ /* store I2C access state */
+ twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &state,
+ TWL4030_PM_MASTER_PB_CFG);
+
+ /* enable I2C access to powerbus (needed for twl4030 regulator) */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x02,
+ TWL4030_PM_MASTER_PB_CFG);
+
+ /* set VAUX3, VSIM and VMMC1 state to active - enable eMMC memory */
+ twl4030_regulator_set_mode(RES_VAUX3, RES_STATE_ACTIVE);
+ twl4030_regulator_set_mode(RES_VSIM, RES_STATE_ACTIVE);
+ twl4030_regulator_set_mode(RES_VMMC1, RES_STATE_ACTIVE);
+
+ /* restore I2C access state */
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, state,
+ TWL4030_PM_MASTER_PB_CFG);
+
+ /* set env variable attkernaddr for relocated kernel */
+ sprintf(buf, "%#x", KERNEL_ADDRESS);
+ setenv("attkernaddr", buf);
+
+ /* initialize omap tags */
+ init_omap_tags();
+
+ /* reuse atags from previous bootloader */
+ reuse_atags();
+
+ dieid_num_r();
+ print_cpuinfo();
+
+ /*
+ * Cortex-A8(r1p0..r1p2) errata 430973 workaround
+ * Set IBE bit in Auxiliary Control Register
+ */
+ omap3_update_aux_cr_secure_rx51(1 << 6, 0);
+
+ return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */
+void set_muxconf_regs(void)
+{
+ MUX_RX51();
+}
+
+static unsigned long int twl_wd_time; /* last time of watchdog reset */
+static unsigned long int twl_i2c_lock;
+
+/*
+ * Routine: hw_watchdog_reset
+ * Description: Reset timeout of twl4030 watchdog.
+ */
+void hw_watchdog_reset(void)
+{
+ u8 timeout = 0;
+
+ /* do not reset watchdog too often - max every 4s */
+ if (get_timer(twl_wd_time) < 4 * CONFIG_SYS_HZ)
+ return;
+
+ /* localy lock twl4030 i2c bus */
+ if (test_and_set_bit(0, &twl_i2c_lock))
+ return;
+
+ /* read actual watchdog timeout */
+ twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER, &timeout,
+ TWL4030_PM_RECEIVER_WATCHDOG_CFG);
+
+ /* timeout 0 means watchdog is disabled */
+ /* reset watchdog timeout to 31s (maximum) */
+ if (timeout != 0)
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 31,
+ TWL4030_PM_RECEIVER_WATCHDOG_CFG);
+
+ /* store last watchdog reset time */
+ twl_wd_time = get_timer(0);
+
+ /* localy unlock twl4030 i2c bus */
+ test_and_clear_bit(0, &twl_i2c_lock);
+}
+
+/*
+ * TWL4030 keypad handler for cfb_console
+ */
+
+static const char keymap[] = {
+ /* normal */
+ 'q', 'o', 'p', ',', '\b', 0, 'a', 's',
+ 'w', 'd', 'f', 'g', 'h', 'j', 'k', 'l',
+ 'e', '.', 0, '\r', 0, 'z', 'x', 'c',
+ 'r', 'v', 'b', 'n', 'm', ' ', ' ', 0,
+ 't', 0, 0, 0, 0, 0, 0, 0,
+ 'y', 0, 0, 0, 0, 0, 0, 0,
+ 'u', 0, 0, 0, 0, 0, 0, 0,
+ 'i', 5, 6, 0, 0, 0, 0, 0,
+ /* fn */
+ '1', '9', '0', '=', '\b', 0, '*', '+',
+ '2', '#', '-', '_', '(', ')', '&', '!',
+ '3', '?', '^', '\r', 0, 156, '$', 238,
+ '4', '/', '\\', '"', '\'', '@', 0, '<',
+ '5', '|', '>', 0, 0, 0, 0, 0,
+ '6', 0, 0, 0, 0, 0, 0, 0,
+ '7', 0, 0, 0, 0, 0, 0, 0,
+ '8', 16, 17, 0, 0, 0, 0, 0,
+};
+
+static u8 keys[8];
+static u8 old_keys[8] = {0, 0, 0, 0, 0, 0, 0, 0};
+#define KEYBUF_SIZE 32
+static u8 keybuf[KEYBUF_SIZE];
+static u8 keybuf_head;
+static u8 keybuf_tail;
+
+/*
+ * Routine: rx51_kp_init
+ * Description: Initialize HW keyboard.
+ */
+int rx51_kp_init(void)
+{
+ int ret = 0;
+ u8 ctrl;
+ ret = twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &ctrl,
+ TWL4030_KEYPAD_KEYP_CTRL_REG);
+
+ if (ret)
+ return ret;
+
+ /* turn on keyboard and use hardware scanning */
+ ctrl |= TWL4030_KEYPAD_CTRL_KBD_ON;
+ ctrl |= TWL4030_KEYPAD_CTRL_SOFT_NRST;
+ ctrl |= TWL4030_KEYPAD_CTRL_SOFTMODEN;
+ ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, ctrl,
+ TWL4030_KEYPAD_KEYP_CTRL_REG);
+ /* enable key event status */
+ ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0xfe,
+ TWL4030_KEYPAD_KEYP_IMR1);
+ /* enable interrupt generation on rising and falling */
+ /* this is a workaround for qemu twl4030 emulation */
+ ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x57,
+ TWL4030_KEYPAD_KEYP_EDR);
+ /* enable ISR clear on read */
+ ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x05,
+ TWL4030_KEYPAD_KEYP_SIH_CTRL);
+ return 0;
+}
+
+static void rx51_kp_fill(u8 k, u8 mods)
+{
+ /* check if some cursor key without meta fn key was pressed */
+ if (!(mods & 2) && (k == 18 || k == 31 || k == 33 || k == 34)) {
+ keybuf[keybuf_tail++] = '\e';
+ keybuf_tail %= KEYBUF_SIZE;
+ keybuf[keybuf_tail++] = '[';
+ keybuf_tail %= KEYBUF_SIZE;
+ if (k == 18) /* up */
+ keybuf[keybuf_tail++] = 'A';
+ else if (k == 31) /* left */
+ keybuf[keybuf_tail++] = 'D';
+ else if (k == 33) /* down */
+ keybuf[keybuf_tail++] = 'B';
+ else if (k == 34) /* right */
+ keybuf[keybuf_tail++] = 'C';
+ keybuf_tail %= KEYBUF_SIZE;
+ return;
+ }
+
+ if (mods & 2) { /* fn meta key was pressed */
+ k = keymap[k+64];
+ } else {
+ k = keymap[k];
+ if (mods & 1) { /* ctrl key was pressed */
+ if (k >= 'a' && k <= 'z')
+ k -= 'a' - 1;
+ }
+ if (mods & 4) { /* shift key was pressed */
+ if (k >= 'a' && k <= 'z')
+ k += 'A' - 'a';
+ else if (k == '.')
+ k = ':';
+ else if (k == ',')
+ k = ';';
+ }
+ }
+ keybuf[keybuf_tail++] = k;
+ keybuf_tail %= KEYBUF_SIZE;
+}
+
+/*
+ * Routine: rx51_kp_tstc
+ * Description: Test if key was pressed (from buffer).
+ */
+int rx51_kp_tstc(void)
+{
+ u8 c, r, dk, i;
+ u8 intr;
+ u8 mods;
+
+ /* localy lock twl4030 i2c bus */
+ if (test_and_set_bit(0, &twl_i2c_lock))
+ return 0;
+
+ /* twl4030 remembers up to 2 events */
+ for (i = 0; i < 2; i++) {
+
+ /* check interrupt register for events */
+ twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &intr,
+ TWL4030_KEYPAD_KEYP_ISR1+(2*i));
+
+ /* no event */
+ if (!(intr&1))
+ continue;
+
+ /* read the key state */
+ i2c_read(TWL4030_CHIP_KEYPAD,
+ TWL4030_KEYPAD_FULL_CODE_7_0, 1, keys, 8);
+
+ /* cut out modifier keys from the keystate */
+ mods = keys[4] >> 4;
+ keys[4] &= 0x0f;
+
+ for (c = 0; c < 8; c++) {
+
+ /* get newly pressed keys only */
+ dk = ((keys[c] ^ old_keys[c])&keys[c]);
+ old_keys[c] = keys[c];
+
+ /* fill the keybuf */
+ for (r = 0; r < 8; r++) {
+ if (dk&1)
+ rx51_kp_fill((c*8)+r, mods);
+ dk = dk >> 1;
+ }
+
+ }
+
+ }
+
+ /* localy unlock twl4030 i2c bus */
+ test_and_clear_bit(0, &twl_i2c_lock);
+
+ return (KEYBUF_SIZE + keybuf_tail - keybuf_head)%KEYBUF_SIZE;
+}
+
+/*
+ * Routine: rx51_kp_getc
+ * Description: Get last pressed key (from buffer).
+ */
+int rx51_kp_getc(void)
+{
+ keybuf_head %= KEYBUF_SIZE;
+ while (!rx51_kp_tstc())
+ WATCHDOG_RESET();
+ return keybuf[keybuf_head++];
+}
+
+/*
+ * Routine: board_mmc_init
+ * Description: Initialize mmc devices.
+ */
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0, 0, 0);
+ omap_mmc_init(1, 0, 0);
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2012
+ * Ивайло Димитров <freemangordon@abv.bg>
+ *
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2008
+ * Dirk Behme <dirk.behme@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _RX51_H_
+#define _RX51_H_
+
+/* Needed for ROM SMC call */
+struct emu_hal_params_rx51 {
+ u32 num_params;
+ u32 param1;
+ u32 param2;
+ u32 param3;
+ u32 param4;
+};
+
+int print_cpuinfo(void);
+
+/*
+ * IEN - Input Enable
+ * IDIS - Input Disable
+ * PTD - Pull type Down
+ * PTU - Pull type Up
+ * DIS - Pull type selection is inactive
+ * EN - Pull type selection is active
+ * M0 - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_RX51() \
+/* SDRC */\
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\
+/* GPMC */\
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
+ MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\
+ MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\
+ MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\
+ MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\
+ MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\
+ MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\
+ MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\
+ MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\
+ MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\
+ MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\
+ MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\
+ MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\
+ MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\
+ MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\
+ MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\
+ MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\
+ MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\
+ MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\
+ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\
+ MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\
+ MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*nDMA_REQ2*/\
+ MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1)) /*nDMA_REQ3*/\
+ MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1*/\
+ MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\
+ MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV*/\
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0*/\
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\
+ MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\
+/* DSS */\
+ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
+ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
+ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
+ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
+ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
+ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
+ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
+ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
+ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
+ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
+ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
+ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
+ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
+ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
+/* CAMERA */\
+ MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS*/\
+ MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS*/\
+ MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\
+ MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\
+ MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+ MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\
+ MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\
+ MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\
+ MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\
+ MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\
+ MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\
+ MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\
+ MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\
+ MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\
+ MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\
+ MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\
+ MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\
+ MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
+ MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
+ MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\
+ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\
+ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\
+ MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\
+/* Audio Interface */\
+ MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\
+ MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLK*/\
+ MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\
+ MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
+/* Expansion card */\
+ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\
+ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\
+ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\
+ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\
+ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\
+ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\
+ MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\
+ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\
+ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\
+ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\
+/* Wireless LAN */\
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\
+ MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\
+ MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\
+ MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\
+ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\
+/* Bluetooth */\
+ MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\
+ MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
+ MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\
+ MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M1)) /*UART2_RX*/\
+ MUX_VAL(CP(UART2_CTS), (IEN | PTD | DIS | M4)) /*GPIO_144*/\
+ MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M4)) /*GPIO_145*/\
+ MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M4)) /*GPIO_146*/\
+ MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147*/\
+/* Modem Interface */\
+ MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\
+ MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/\
+ MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/\
+ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\
+ MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M1)) /*SSI1_DAT*/\
+ MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M1)) /*SSI1_FLAG*/\
+ MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M1)) /*SSI1_RDY*/\
+ MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M1)) /*SSI1_WAKE*/\
+ MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\
+ MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M4)) /*GPIO_157*/\
+ MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158*/\
+ MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\
+ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\
+ MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\
+ MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\
+/* Serial Interface */\
+ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS*/\
+ MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS*/\
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX*/\
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX*/\
+ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\
+ MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\
+ MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\
+ MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\
+ MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DA0*/\
+ MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DA1*/\
+ MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DA2*/\
+ MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DA3*/\
+ MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DA4*/\
+ MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DA5*/\
+ MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DA6*/\
+ MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DA7*/\
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\
+ MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4)) /*GPIO_168*/\
+ MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\
+ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\
+ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\
+ MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\
+ MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\
+ MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\
+ MUX_VAL(CP(MCSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\
+ MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\
+ MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOM*/\
+ MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\
+ MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\
+ MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\
+/* USB EHCI (port 2) */\
+ MUX_VAL(CP(MCSPI1_CS3), (IEN | PTU | DIS | M3)) /*HSUSB2_DA2*/\
+ MUX_VAL(CP(MCSPI2_CLK), (IEN | PTU | DIS | M3)) /*HSUSB2_DA7*/\
+ MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTU | DIS | M3)) /*HSUSB2_DA4*/\
+ MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTU | DIS | M3)) /*HSUSB2_DA5*/\
+ MUX_VAL(CP(MCSPI2_CS0), (IEN | PTU | DIS | M3)) /*HSUSB2_DA6*/\
+ MUX_VAL(CP(MCSPI2_CS1), (IEN | PTU | DIS | M3)) /*HSUSB2_DA3*/\
+ MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_CLK*/\
+ MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_STP*/\
+ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DIR*/\
+ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_NXT*/\
+ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DA0*/\
+ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DA1*/\
+/* Control and debug */\
+ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
+ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\
+ MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\
+ MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\
+ MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\
+ MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*MMC1_WP*/\
+ MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\
+ MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\
+ MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\
+ MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\
+ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MD*/\
+ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT*/\
+ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\
+ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_STP*/\
+ MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\
+ MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA0*/\
+ MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA1*/\
+ MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA2*/\
+ MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA7*/\
+ MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA4*/\
+ MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA5*/\
+ MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA6*/\
+ MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA3*/\
+ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DIR*/\
+ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_NXT*/\
+ MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\
+ MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\
+ MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\
+ MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\
+ MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\
+ MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\
+ MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\
+ MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\
+ MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\
+ MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\
+ MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\
+ MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\
+ MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\
+ MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\
+ MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\
+ MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\
+ MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\
+ MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\
+ MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\
+ MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\
+ MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\
+ MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\
+ MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\
+ MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\
+ MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\
+ MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\
+ MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\
+ MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\
+ MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\
+ MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\
+ MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\
+ MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\
+ MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\
+ MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\
+ MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\
+ MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\
+ MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26m*/\
+ MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespw*/\
+ MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswa*/\
+ MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9ni*/\
+ MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6*/\
+ MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\
+ MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\
+ MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmare0*/\
+ MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmare1*/\
+ MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmare2*/\
+ MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmare3*/\
+ MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrs*/\
+ MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\
+ MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\
+ MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\
+ MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\
+ MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtc*/\
+ MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\
+ MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeu*/\
+ MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlere*/\
+ MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleac*/\
+ MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\
+ MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\
+ MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\
+ MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\
+ MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusfl*/\
+ MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusfl*/\
+ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
+ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/
+
+#define MUX_RX51_C() \
+ MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\
+ MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\
+ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\
+ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\
+ MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
+ MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2011
+ * marcel@mesa.nl, Mesa Consulting B.V.
+ *
+ * (C) Copyright 2004-2005
+ * Nokia Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+/*
+ * Code copied from maemo kernel 2.6.28 file
+ * arch/arm/plat-omap/include/mach/board.h
+ *
+ * Information structures for board-specific data
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK 0x4f01
+#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
+#define OMAP_TAG_USB 0x4f04
+#define OMAP_TAG_LCD 0x4f05
+#define OMAP_TAG_GPIO_SWITCH 0x4f06
+#define OMAP_TAG_UART 0x4f07
+#define OMAP_TAG_FBMEM 0x4f08
+#define OMAP_TAG_STI_CONSOLE 0x4f09
+#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
+#define OMAP_TAG_PARTITION 0x4f0b
+#define OMAP_TAG_TEA5761 0x4f10
+#define OMAP_TAG_TMP105 0x4f11
+
+#define OMAP_TAG_BOOT_REASON 0x4f80
+#define OMAP_TAG_FLASH_PART_STR 0x4f81
+#define OMAP_TAG_VERSION_STR 0x4f82
+
+#define OMAP_TAG_NOKIA_BT 0x4e01
+#define OMAP_TAG_WLAN_CX3110X 0x4e02
+#define OMAP_TAG_CBUS 0x4e03
+#define OMAP_TAG_EM_ASIC_BB5 0x4e04
+
+
+struct omap_clock_config {
+ /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+ u8 system_clock_type;
+};
+
+struct omap_serial_console_config {
+ u8 console_uart;
+ u32 console_speed;
+};
+
+struct omap_sti_console_config {
+ unsigned enable:1;
+ u8 channel;
+};
+
+struct omap_usb_config {
+ /* Configure drivers according to the connectors on your board:
+ * - "A" connector (rectagular)
+ * ... for host/OHCI use, set "register_host".
+ * - "B" connector (squarish) or "Mini-B"
+ * ... for device/gadget use, set "register_dev".
+ * - "Mini-AB" connector (very similar to Mini-B)
+ * ... for OTG use as device OR host, initialize "otg"
+ */
+ unsigned register_host:1;
+ unsigned register_dev:1;
+ u8 otg; /* port number, 1-based: usb1 == 2 */
+
+ u8 hmc_mode;
+
+ /* implicitly true if otg: host supports remote wakeup? */
+ u8 rwc;
+
+ /* signaling pins used to talk to transceiver on usbN:
+ * 0 == usbN unused
+ * 2 == usb0-only, using internal transceiver
+ * 3 == 3 wire bidirectional
+ * 4 == 4 wire bidirectional
+ * 6 == 6 wire unidirectional (or TLL)
+ */
+ u8 pins[3];
+};
+
+struct omap_lcd_config {
+ char panel_name[16];
+ char ctrl_name[16];
+ s16 nreset_gpio;
+ u8 data_lines;
+};
+
+struct omap_fbmem_config {
+ u32 start;
+ u32 size;
+};
+
+struct omap_gpio_switch_config {
+ char name[12];
+ u16 gpio;
+ u8 flags:4;
+ u8 type:4;
+ unsigned int key_code:24; /* Linux key code */
+};
+
+struct omap_uart_config {
+ /* Bit field of UARTs present; bit 0 --> UART1 */
+ unsigned int enabled_uarts;
+};
+
+struct omap_tea5761_config {
+ u16 enable_gpio;
+};
+
+struct omap_partition_config {
+ char name[16];
+ unsigned int size;
+ unsigned int offset;
+ /* same as in include/linux/mtd/partitions.h */
+ unsigned int mask_flags;
+};
+
+struct omap_flash_part_str_config {
+ char part_table[0];
+};
+
+struct omap_boot_reason_config {
+ char reason_str[12];
+};
+
+struct omap_version_config {
+ char component[12];
+ char version[12];
+};
+
+/*
+ * Code copied from maemo kernel 2.6.28 file
+ * arch/arm/plat-omap/include/mach/board-nokia.h
+ *
+ * Information structures for Nokia-specific board config data
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ */
+
+struct omap_bluetooth_config {
+ u8 chip_type;
+ u8 bt_wakeup_gpio;
+ u8 host_wakeup_gpio;
+ u8 reset_gpio;
+ u8 bt_uart;
+ u8 bd_addr[6];
+ u8 bt_sysclk;
+};
+
+struct omap_wlan_cx3110x_config {
+ u8 chip_type;
+ u8 reserverd;
+ s16 power_gpio;
+ s16 irq_gpio;
+ s16 spi_cs_gpio;
+};
+
+struct omap_cbus_config {
+ s16 clk_gpio;
+ s16 dat_gpio;
+ s16 sel_gpio;
+};
+
+struct omap_em_asic_bb5_config {
+ s16 retu_irq_gpio;
+ s16 tahvo_irq_gpio;
+};
+
+/*
+ * omap_tag handling
+ *
+ * processing omap tag structures
+ *
+ * Copyright (C) 2011 marcel@mesa.nl, Mesa Consulting B.V.
+ * Copyright (C) 2012 Pali Rohár <pali.rohar@gmail.com>
+ */
+
+/* TI OMAP specific information */
+#define ATAG_BOARD 0x414f4d50
+
+struct tag_omap_header {
+ u16 tag;
+ u16 size;
+};
+
+struct tag_omap {
+ struct tag_omap_header hdr;
+ union {
+ struct omap_clock_config clock;
+ struct omap_serial_console_config serial_console;
+ struct omap_sti_console_config sti_console;
+ struct omap_usb_config usb;
+ struct omap_lcd_config lcd;
+ struct omap_fbmem_config fbmem;
+ struct omap_gpio_switch_config gpio_switch;
+ struct omap_uart_config uart;
+ struct omap_tea5761_config tea5761;
+ struct omap_partition_config partition;
+ struct omap_flash_part_str_config flash_part_str;
+ struct omap_boot_reason_config boot_reason;
+ struct omap_version_config version;
+ struct omap_bluetooth_config bluetooth;
+ struct omap_wlan_cx3110x_config wlan_cx3110x;
+ struct omap_cbus_config cbus;
+ struct omap_em_asic_bb5_config em_asic_bb5;
+ } u;
+};
+
+#define tag_omap_next(t) ((struct tag_omap *)((u8 *)(t) + \
+ (t)->hdr.size + sizeof(struct tag_omap_header)))
+
+#define OMAP_TAG_HEADER_CONFIG(config, type) \
+ .hdr.tag = config, \
+ .hdr.size = sizeof(struct type)
+
+#define OMAP_TAG_UART_CONFIG(p1) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_UART, omap_uart_config), \
+ .u.uart.enabled_uarts = p1, \
+ }
+
+#define OMAP_TAG_SERIAL_CONSOLE_CONFIG(p1, p2) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_SERIAL_CONSOLE, \
+ omap_serial_console_config), \
+ .u.serial_console.console_uart = p1, \
+ .u.serial_console.console_speed = p2, \
+ }
+
+#define OMAP_TAG_LCD_CONFIG(p1, p2, p3, p4) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_LCD, omap_lcd_config), \
+ .u.lcd.panel_name = p1, \
+ .u.lcd.ctrl_name = p2, \
+ .u.lcd.nreset_gpio = p3, \
+ .u.lcd.data_lines = p4, \
+ }
+
+#define OMAP_TAG_GPIO_SWITCH_CONFIG(p1, p2, p3, p4, p5) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_GPIO_SWITCH, \
+ omap_gpio_switch_config), \
+ .u.gpio_switch.name = p1, \
+ .u.gpio_switch.gpio = p2, \
+ .u.gpio_switch.flags = p3, \
+ .u.gpio_switch.type = p4, \
+ .u.gpio_switch.key_code = p5, \
+ }
+
+#define OMAP_TAG_WLAN_CX3110X_CONFIG(p1, p2, p3, p4, p5) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_WLAN_CX3110X, \
+ omap_wlan_cx3110x_config), \
+ .u.wlan_cx3110x.chip_type = p1, \
+ .u.wlan_cx3110x.reserverd = p2, \
+ .u.wlan_cx3110x.power_gpio = p3, \
+ .u.wlan_cx3110x.irq_gpio = p4, \
+ .u.wlan_cx3110x.spi_cs_gpio = p5, \
+ }
+
+#define OMAP_TAG_PARTITION_CONFIG(p1, p2, p3, p4) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_PARTITION, \
+ omap_partition_config), \
+ .u.partition.name = p1, \
+ .u.partition.size = p2, \
+ .u.partition.offset = p3, \
+ .u.partition.mask_flags = p4, \
+ }
+
+#define OMAP_TAG_BOOT_REASON_CONFIG(p1) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_BOOT_REASON, \
+ omap_boot_reason_config), \
+ .u.boot_reason.reason_str = p1, \
+ }
+
+#define OMAP_TAG_VERSION_STR_CONFIG(p1, p2) \
+ { \
+ OMAP_TAG_HEADER_CONFIG(OMAP_TAG_VERSION_STR, \
+ omap_version_config), \
+ .u.version.component = p1, \
+ .u.version.version = p2, \
+ }
LIB = $(obj)lib$(VENDOR).o
-COBJS-y += board.o
-COBJS-$(CONFIG_SPI_UART_SWITCH) += uart-spi-switch.o
-COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
+include common.mk
COBJS := $(COBJS-y)
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
--- /dev/null
+# common options for all tegra boards
+COBJS-y += ../../nvidia/common/board.o
+COBJS-$(CONFIG_SPI_UART_SWITCH) += ../../nvidia/common/uart-spi-switch.o
+COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += ../../nvidia/common/emc.o
aliases {
usb0 = "/usb@c5008000";
+ usb1 = "/usb@c5004000";
};
memory {
};
usb@c5004000 {
- status = "disabled";
+ nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
nand-controller@70008000 {
aliases {
i2c0 = "/i2c@7000d000";
usb0 = "/usb@c5008000";
- usb1 = "/usb@c5000000";
};
memory {
};
};
+ usb@c5000000 {
+ status = "disabled";
+ };
+
usb@c5004000 {
status = "disabled";
};
return 0;
}
#endif
+
+void pin_mux_usb(void)
+{
+ funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI);
+ pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4);
+ pinmux_tristate_disable(PINGRP_CDEV2);
+ /* USB2 PHY reset GPIO */
+ pinmux_tristate_disable(PINGRP_UAC);
+}
#include <asm/arch/tegra.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
+#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
#include <asm/arch-tegra/mmc.h>
#include <asm/gpio.h>
#endif
/* TODO: Remove this code when the SPI switch is working */
-#ifndef CONFIG_SPI_UART_SWITCH
-/*
- * Routine: gpio_config_uart_seaboard
- * Description: Force GPIO_PI3 low on Seaboard so UART4 works.
- */
-static void gpio_config_uart_seaboard(void)
+#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
+void gpio_early_init_uart(void)
{
/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
+#ifndef CONFIG_SPL_BUILD
gpio_request(GPIO_PI3, NULL);
+#endif
gpio_direction_output(GPIO_PI3, 0);
}
-
-void gpio_early_init_uart(void)
-{
- if (machine_is_ventana())
- return;
- gpio_config_uart_seaboard();
-}
#endif
#ifdef CONFIG_TEGRA_MMC
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
_endtext = .;
} > ram
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) } > ram
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
.rodata : {
*(.rodata);
#include <serial.h>
#include <asm/io.h>
#include <asm/arch/pxa.h>
+#include <asm/arch/regs-mmc.h>
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+ pxa_mmc_register(0);
+ return 0;
+}
+#endif
+
int dram_init(void)
{
pxa2xx_dram_init();
.sdata : { *(.sdata*) }
- .u_boot_cmd : {
- __u_boot_cmd_start = .;
- *(.u_boot_cmd)
- __u_boot_cmd_end = .;
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
}
uboot_end_data = .;
}
}
-void fpga_serial_puts (const char *s)
-{
- while (*s) {
- fpga_serial_print (*s++);
- }
-}
-
int fpga_serial_getc (void)
{
while ((in8 (UART (LSR)) & 0x01) == 0);
extern void fpga_serial_init (int);
extern void fpga_serial_putc (char);
-extern void fpga_serial_puts (const char *);
extern int fpga_serial_getc (void);
extern int fpga_serial_tstc (void);
extern void fpga_serial_setbrg (void);
#include <watchdog.h>
#include <pci.h>
#include <netdev.h>
+#include <serial.h>
#include "hardware.h"
#include "pcippc2.h"
fpga_serial_init (sconsole_get_baudrate ());
sconsole_putc = fpga_serial_putc;
- sconsole_puts = fpga_serial_puts;
+ sconsole_puts = default_serial_puts;
sconsole_getc = fpga_serial_getc;
sconsole_tstc = fpga_serial_tstc;
sconsole_setbrg = fpga_serial_setbrg;
#include <sha1.h>
#include <asm/io.h>
#include <net.h>
+#include <ata.h>
DECLARE_GLOBAL_DATA_PTR;
* ( bus per_addr 20 -30 is connectsd on CF bus A10-A0)
* These values are shifted
*/
-extern ulong *ide_bus_offset;
void inline ide_outb(int dev, int port, unsigned char val)
{
debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
udelay (10000);
}
#endif /* defined (CONFIG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+
+
+/* this is motly the same as it should, causing a little code duplication */
+#if defined(CONFIG_CMD_IDE)
+#define EIEIO __asm__ volatile ("eieio")
+
+void ide_input_swap_data(int dev, ulong *sect_buf, int words)
+{
+ volatile ushort *pbuf =
+ (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
+ ushort *dbuf = (ushort *) sect_buf;
+
+ debug("in input swap data base for read is %lx\n",
+ (unsigned long) pbuf);
+
+ while (words--) {
+ *dbuf++ = *pbuf;
+ *dbuf++ = *pbuf;
+ }
+}
+
+void ide_output_data(int dev, const ulong *sect_buf, int words)
+{
+ ushort *dbuf;
+ volatile ushort *pbuf;
+
+ pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
+ dbuf = (ushort *) sect_buf;
+ while (words--) {
+ EIEIO;
+ *pbuf = ld_le16(dbuf++);
+ EIEIO;
+ *pbuf = ld_le16(dbuf++);
+ }
+}
+
+void ide_input_data(int dev, ulong *sect_buf, int words)
+{
+ ushort *dbuf;
+ volatile ushort *pbuf;
+
+ pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
+ dbuf = (ushort *) sect_buf;
+
+ debug("in input data base for read is %lx\n", (unsigned long) pbuf);
+
+ while (words--) {
+ EIEIO;
+ *dbuf++ = ld_le16(pbuf);
+ EIEIO;
+ *dbuf++ = ld_le16(pbuf);
+ }
+}
+
+#endif
galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
}
-
-static void p3mx_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
static struct serial_device p3mx_serial_drv = {
.name = "p3mx_serial",
.start = p3mx_serial_init,
.stop = NULL,
.setbrg = p3mx_serial_setbrg,
.putc = p3mx_serial_putc,
- .puts = p3mx_serial_puts,
+ .puts = default_serial_puts,
.getc = p3mx_serial_getc,
.tstc = p3mx_serial_tstc,
};
#include <command.h>
#include <asm/io.h>
#include <asm/arch/pxa.h>
+#include <asm/arch/regs-mmc.h>
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+ pxa_mmc_register(0);
+ return 0;
+}
+#endif
+
int board_late_init(void)
{
setenv("stdout", "serial");
+++ /dev/null
-#
-# Qemu -M mips system emulator
-# See http://fabrice.bellard.free.fr/qemu
-#
-
-# ROM version
-CONFIG_SYS_TEXT_BASE = 0xbfc00000
-
-# RAM version
-#CONFIG_SYS_TEXT_BASE = 0x80001000
/*
OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
*/
+#if defined(CONFIG_64BIT)
+OUTPUT_FORMAT("elf64-tradbigmips", "elf64-tradbigmips", "elf64-tradlittlemips")
+#else
OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
+#endif
OUTPUT_ARCH(mips)
ENTRY(_start)
SECTIONS
. = ALIGN(4);
.sdata : { *(.sdata*) }
- . = .;
- .u_boot_cmd : {
- __u_boot_cmd_start = .;
- *(.u_boot_cmd)
- __u_boot_cmd_end = .;
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
}
uboot_end_data = .;
+#if defined(CONFIG_64BIT)
+ num_got_entries = (__got_end - __got_start) >> 3;
+#else
num_got_entries = (__got_end - __got_start) >> 2;
+#endif
. = ALIGN(4);
.sbss : { *(.sbss*) }
.sdata : { *(.sdata*) }
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
uboot_end_data = .;
num_got_entries = (__got_end - __got_start) >> 2;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
__start___ex_table = .;
}
PROVIDE (_egot = .);
- PROVIDE (__u_boot_cmd_start = .);
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- . = ALIGN(4);
+
+ .u_boot_list : {
+ #include <u-boot.lst>
}
- PROVIDE (__u_boot_cmd_end = .);
PROVIDE (reloc_dst_end = .);
/* _reloc_dst_end = .; */
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
ldr r2, =CLK_SRC_PERIL0_OFFSET
str r1, [r0, r2]
- /* FIMD0 */
+ /* CAM , FIMC 0-3 */
+ ldr r1, =CLK_SRC_CAM_VAL
+ ldr r2, =CLK_SRC_CAM_OFFSET
+ str r1, [r0, r2]
+
+ /* MFC */
+ ldr r1, =CLK_SRC_MFC_VAL
+ ldr r2, =CLK_SRC_MFC_OFFSET
+ str r1, [r0, r2]
+
+ /* G3D */
+ ldr r1, =CLK_SRC_G3D_VAL
+ ldr r2, =CLK_SRC_G3D_OFFSET
+ str r1, [r0, r2]
+
+ /* LCD0 */
ldr r1, =CLK_SRC_LCD0_VAL
ldr r2, =CLK_SRC_LCD0_OFFSET
str r1, [r0, r2]
ldr r2, =CLK_DIV_PERIL0_OFFSET
str r1, [r0, r2]
+ /* CAM, FIMC 0-3: CAM Clock Divisors */
+ ldr r1, =CLK_DIV_CAM_VAL
+ ldr r2, =CLK_DIV_CAM_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_MFC: MFC Clock Divisors */
+ ldr r1, =CLK_DIV_MFC_VAL
+ ldr r2, =CLK_DIV_MFC_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_G3D: G3D Clock Divisors */
+ ldr r1, =CLK_DIV_G3D_VAL
+ ldr r2, =CLK_DIV_G3D_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_LCD0: LCD0 Clock Divisors */
+ ldr r1, =CLK_DIV_LCD0_VAL
+ ldr r2, =CLK_DIV_LCD0_OFFSET
+ str r1, [r0, r2]
+
/* Set PLL locktime */
ldr r1, =PLL_LOCKTIME
ldr r2, =APLL_LOCK_OFFSET
#define CLK_DIV_FSYS2_OFFSET 0xC548
#define CLK_DIV_FSYS3_OFFSET 0xC54C
+#define CLK_SRC_CAM_OFFSET 0xC220
+#define CLK_SRC_TV_OFFSET 0xC224
+#define CLK_SRC_MFC_OFFSET 0xC228
+#define CLK_SRC_G3D_OFFSET 0xC22C
+#define CLK_SRC_LCD0_OFFSET 0xC234
#define CLK_SRC_PERIL0_OFFSET 0xC250
+
+#define CLK_DIV_CAM_OFFSET 0xC520
+#define CLK_DIV_TV_OFFSET 0xC524
+#define CLK_DIV_MFC_OFFSET 0xC528
+#define CLK_DIV_G3D_OFFSET 0xC52C
+#define CLK_DIV_LCD0_OFFSET 0xC534
#define CLK_DIV_PERIL0_OFFSET 0xC550
#define CLK_SRC_LCD0_OFFSET 0xC234
| (UART1_RATIO << 4) \
| (UART0_RATIO << 0))
+/* Clock Source CAM/FIMC */
+/* CLK_SRC_CAM */
+#define CAM0_SEL_XUSBXTI 1
+#define CAM1_SEL_XUSBXTI 1
+#define CSIS0_SEL_XUSBXTI 1
+#define CSIS1_SEL_XUSBXTI 1
+
+#define FIMC_SEL_SCLKMPLL 6
+#define FIMC0_LCLK_SEL FIMC_SEL_SCLKMPLL
+#define FIMC1_LCLK_SEL FIMC_SEL_SCLKMPLL
+#define FIMC2_LCLK_SEL FIMC_SEL_SCLKMPLL
+#define FIMC3_LCLK_SEL FIMC_SEL_SCLKMPLL
+
+#define CLK_SRC_CAM_VAL ((CSIS1_SEL_XUSBXTI << 28) \
+ | (CSIS0_SEL_XUSBXTI << 24) \
+ | (CAM1_SEL_XUSBXTI << 20) \
+ | (CAM0_SEL_XUSBXTI << 16) \
+ | (FIMC3_LCLK_SEL << 12) \
+ | (FIMC2_LCLK_SEL << 8) \
+ | (FIMC1_LCLK_SEL << 4) \
+ | (FIMC0_LCLK_SEL << 0))
+
+/* SCLK CAM */
+/* CLK_DIV_CAM */
+#define FIMC0_LCLK_RATIO 4
+#define FIMC1_LCLK_RATIO 4
+#define FIMC2_LCLK_RATIO 4
+#define FIMC3_LCLK_RATIO 4
+#define CLK_DIV_CAM_VAL ((FIMC3_LCLK_RATIO << 12) \
+ | (FIMC2_LCLK_RATIO << 8) \
+ | (FIMC1_LCLK_RATIO << 4) \
+ | (FIMC0_LCLK_RATIO << 0))
+
+/* SCLK MFC */
+/* CLK_SRC_MFC */
+#define MFC_SEL_MPLL 0
+#define MOUTMFC_0 0
+#define MFC_SEL MOUTMFC_0
+#define MFC_0_SEL MFC_SEL_MPLL
+#define CLK_SRC_MFC_VAL ((MFC_SEL << 8) | (MFC_0_SEL))
+
+
+/* CLK_DIV_MFC */
+#define MFC_RATIO 3
+#define CLK_DIV_MFC_VAL (MFC_RATIO)
+
+/* SCLK G3D */
+/* CLK_SRC_G3D */
+#define G3D_SEL_MPLL 0
+#define MOUTG3D_0 0
+#define G3D_SEL MOUTG3D_0
+#define G3D_0_SEL G3D_SEL_MPLL
+#define CLK_SRC_G3D_VAL ((G3D_SEL << 8) | (G3D_0_SEL))
+
+/* CLK_DIV_G3D */
+#define G3D_RATIO 1
+#define CLK_DIV_G3D_VAL (G3D_RATIO)
+
+/* SCLK LCD0 */
/* CLK_SRC_LCD0 */
#define FIMD_SEL_SCLKMPLL 6
#define MDNIE0_SEL_XUSBXTI 1
| (MDNIE0_SEL_XUSBXTI << 4) \
| (FIMD_SEL_SCLKMPLL << 0))
+/* CLK_DIV_LCD0 */
+#define FIMD0_RATIO 4
+#define CLK_DIV_LCD0_VAL (FIMD0_RATIO)
+
/* Required period to generate a stable clock output */
/* PLL_LOCK_TIME */
#define PLL_LOCKTIME 0x1C20
.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
. = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ } >.sram
+ . = ALIGN(4);
+
/* Align .machine_param on 256 byte boundary for easier searching */
.machine_param ALIGN(0x100) : { *(.machine_param) } >.sram
. = ALIGN(4);
. = ALIGN(4);
.got : { *(.got) }
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
- . = ALIGN(4);
+ . = align(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
+
+ . = align(4);
.mmudata : { *(.mmudata) }
. = ALIGN(4);
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
+++ /dev/null
-The port was tested on Wind River System Sbc8560 board
-<www.windriver.com>. U-Boot was installed on the flash memory of the
-CPU card (no the SODIMM).
-
-NOTE: Please configure uboot compile to the proper PCI frequency and
-setup the appropriate DIP switch settings.
-
-SBC8560 board:
-
-Make sure boards switches are set to their appropriate conditions.
-Refer to the Engineering Reference Guide ERG-00300-002. Of particular
-importance are: 1) the settings for JP4 (JP4 1-3 and 2-4), which
-select the on-board FLASH device (Intel 28F128Jx); 2) The settings
-for the Clock SW9 (33 MHz or 66 MHz).
-
- Note: SW9 Settings: 66 MHz
- 4:1 ratio CCB clocks:SYSCLK
- 3:1 ration e500 Core:CCB
- pos1 - on, pos2 - on, pos3 - off, pos4 - on, pos5 - off, pos6 - on
- Note: SW9 Settings: 33 MHz
- 8:1 ratio CCB clocks:SYSCLK
- 3:1 ration e500 Core:CCB
- pos1 - on, pos2 - on, pos3 - on, pos4 - off, pos5 - off, pos6 - on
-
-
-Flashing the FLASH device with the "Wind River ICE":
-
-1) Properly connect and configure the Wind River ICE to the target
- JTAG port. This includes running the SBC8560 register script. Make
- sure target memory can be read and written.
-
-2) Build the u-boot image:
- make distclean
- make SBC8560_66_config or SBC8560_33_config
- make CROSS_COMPILE=.../ELDK3.0/ppc_8xx-/ all
-
- Note: reference is made to the ELDK3.0 compiler. Further, it seems
- the ppc_8xx compiler is required for the 85xx (no 85xx
- designated compiler in ELDK3.0)
-
-3) Convert the uboot (.elf) file to a uboot.bin file (using
- visionClick converter). The bin file should be converted from
- fffc0000 to ffffffff
-
-4) Setup the Flash Utility (tools menu) for:
-
- Do a "dc clr" [visionClick] to load the default register settings
- Determine the clock speed of the PCI bus and set SW9 accordingly
- Note: the speed of the PCI bus defaults to the slowest PCI card
- PlayBack the "default" register file for the SBC8560
- Select the uboot.bin file with zero bias
- Select the initialize Target prior to programming
- Select the V28F640Jx (8192 x 8) 1 device FLASH Algorithm
- Select the erase base address from FFFC0000 to FFFFFFFF
- Select the start address from 0 with size of 4000
-
-5) Erase and Program
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
-
-void fsl_ddr_board_options(memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- /*
- * Factors to consider for CPO:
- * - frequency
- * - ddr1 vs. ddr2
- */
- popts->cpo_override = 0;
-
- /*
- * Factors to consider for write data delay:
- * - number of DIMMs
- *
- * 1 = 1/4 clock delay
- * 2 = 1/2 clock delay
- * 3 = 3/4 clock delay
- * 4 = 1 clock delay
- * 5 = 5/4 clock delay
- * 6 = 3/2 clock delay
- */
- popts->write_data_delay = 3;
-
- /*
- * Factors to consider for half-strength driver enable:
- * - number of DIMMs installed
- */
- popts->half_strength_driver_enable = 0;
-}
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/* LAW(Local Access Window) configuration:
- * 0000_0000-0800_0000: DDR(512M) -or- larger
- * c000_0000-cfff_ffff: PCI(256M)
- * d000_0000-dfff_ffff: RapidIO(256M)
- * e000_0000-ffff_ffff: localbus(512M)
- * e000_0000-e3ff_ffff: LBC 64M, 32-bit flash on CS6
- * e400_0000-e7ff_ffff: LBC 64M, 32-bit flash on CS1
- * e800_0000-efff_ffff: LBC 128M, nothing here
- * f000_0000-f3ff_ffff: LBC 64M, SDRAM on CS3
- * f400_0000-f7ff_ffff: LBC 64M, SDRAM on CS4
- * f800_0000-fdff_ffff: LBC 64M, nothing here
- * fc00_0000-fcff_ffff: LBC 16M, CSR,RTC,UART,etc on CS5
- * fd00_0000-fdff_ffff: LBC 16M, nothing here
- * fe00_0000-feff_ffff: LBC 16M, nothing here
- * ff00_0000-ff6f_ffff: LBC 7M, nothing here
- * ff70_0000-ff7f_ffff: CCSRBAR 1M
- * ff80_0000-ffff_ffff: LBC 8M, 8-bit flash on CS0
- * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
- * Window.
- * Note: If flash is 8M at default position(last 8M),no LAW needed.
- */
-
-struct law_entry law_table[] = {
-#ifndef CONFIG_SPD_EEPROM
- SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
-#endif
- SET_LAW(CONFIG_SYS_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
- SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
+++ /dev/null
-/*
- * (C) Copyright 2003,Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
- * Added support for Wind River SBC8560 board
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <ioports.h>
-#include <spd_sdram.h>
-#include <miiphy.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
- /* Port A configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
- /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
- /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
- /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */
- /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */
- /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */
- /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
- /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
- /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
- /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
- /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
- /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
- /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
- /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
- /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */
- /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */
- /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */
- /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */
- /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
- /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
- /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
- /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
- /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */
- /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */
- /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
- /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */
- /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
- /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
- /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
- /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
- /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */
- /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
- },
-
- /* Port B configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
- /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
- /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
- /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
- /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
- /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
- /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
- /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
- /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
- /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
- /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
- /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
- /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
- /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
- /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
- /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
- /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
- /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
- /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */
- /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
- /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
- /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
- /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- },
-
- /* Port C */
- { /* conf ppar psor pdir podr pdat */
- /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
- /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
- /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
- /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */
- /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */
- /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
- /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */
- /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
- /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
- /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
- /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
- /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
- /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */
- /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */
- /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
- /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */
- /* PC15 */ { 1, 1, 0, 0, 0, 0 }, /* PC15 */
- /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
- /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
- /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */
- /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */
- /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */
- /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */
- /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
- /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
- /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
- /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
- /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
- /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
- /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
- /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
- /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
- },
-
- /* Port D */
- { /* conf ppar psor pdir podr pdat */
- /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
- /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
- /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 RTS */
- /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */
- /* PD27 */ { 1, 1, 1, 1, 0, 0 }, /* SCC2 TxD */
- /* PD26 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 RTS */
- /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
- /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
- /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
- /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
- /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
- /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
- /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
- /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
- /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
- /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
- /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */
- /* PD14 */ { 0, 0, 0, 1, 0, 0 }, /* LED */
- /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
- /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
- /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
- /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
- /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
- /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
- /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
- /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
- /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
- /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
- /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- }
-};
-
-int board_early_init_f (void)
-{
-#if defined(CONFIG_PCI)
- volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
-
- pci->peer &= 0xfffffffdf; /* disable master abort */
-#endif
- return 0;
-}
-
-void reset_phy (void)
-{
-#if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */
- volatile unsigned char *bcsr = (unsigned char *) CONFIG_SYS_BCSR;
-#endif
- /* reset Giga bit Ethernet port if needed here */
-
- /* reset the CPM FEC port */
-#if (CONFIG_ETHER_INDEX == 2)
- bcsr[0] &= ~0x20;
- udelay(2);
- bcsr[0] |= 0x20;
- udelay(1000);
-#elif (CONFIG_ETHER_INDEX == 3)
- bcsr[0] &= ~0x10;
- udelay(2);
- bcsr[0] |= 0x10;
- udelay(1000);
-#endif
-#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
- /* reset PHY */
- miiphy_reset("FCC1", 0x0);
-
- /* change PHY address to 0x02 */
- bb_miiphy_write(NULL, 0, MII_MIPSCR, 0xf028);
-
- bb_miiphy_write(NULL, 0x02, MII_BMCR,
- BMCR_ANENABLE | BMCR_ANRESTART);
-#endif /* CONFIG_MII */
-}
-
-int checkboard (void)
-{
- sys_info_t sysinfo;
- char buf[32];
-
- get_sys_info (&sysinfo);
-
-#ifdef CONFIG_SBC8560
- printf ("Board: Wind River SBC8560 Board\n");
-#else
- printf ("Board: Wind River SBC8540 Board\n");
-#endif
- printf ("\tCPU: %s MHz\n", strmhz(buf, sysinfo.freqProcessor[0]));
- printf ("\tCCB: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus));
- printf ("\tDDR: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus/2));
- if((CONFIG_SYS_LBC_LCRR & 0x0f) == 2 || (CONFIG_SYS_LBC_LCRR & 0x0f) == 4 \
- || (CONFIG_SYS_LBC_LCRR & 0x0f) == 8) {
- printf ("\tLBC: %s MHz\n",
- strmhz(buf, sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f)));
- } else {
- printf("\tLBC: unknown\n");
- }
- printf("\tCPM: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus));
- printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
- return (0);
-}
-
-
-#if defined(CONFIG_SYS_DRAM_TEST)
-int testdram (void)
-{
- uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
- uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
- uint *p;
-
- printf("SDRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("SDRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("SDRAM test passed.\n");
- return 0;
-}
-#endif
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- * fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-phys_size_t fixed_sdram(void)
-{
-
-#define CONFIG_SYS_DDR_CONTROL 0xc2000000
-
- #ifndef CONFIG_SYS_RAMBOOT
- volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-
-#if (CONFIG_SYS_SDRAM_SIZE == 512)
- ddr->cs0_bnds = 0x0000000f;
-#else
- ddr->cs0_bnds = 0x00000007;
-#endif
- ddr->cs1_bnds = 0x0010001f;
- ddr->cs2_bnds = 0x00000000;
- ddr->cs3_bnds = 0x00000000;
- ddr->cs0_config = 0x80000102;
- ddr->cs1_config = 0x80000102;
- ddr->cs2_config = 0x00000000;
- ddr->cs3_config = 0x00000000;
- ddr->timing_cfg_1 = 0x37334321;
- ddr->timing_cfg_2 = 0x00000800;
- ddr->sdram_cfg = 0x42000000;
- ddr->sdram_mode = 0x00000022;
- ddr->sdram_interval = 0x05200100;
- ddr->err_sbe = 0x00ff0000;
- #if defined (CONFIG_DDR_ECC)
- ddr->err_disable = 0x0000000D;
- #endif
- asm("sync;isync;msync");
- udelay(500);
- #if defined (CONFIG_DDR_ECC)
- /* Enable ECC checking */
- ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
- #else
- ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
- #endif
- asm("sync; isync; msync");
- udelay(500);
- #endif
- return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-}
-#endif /* !defined(CONFIG_SPD_EEPROM) */
-
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
- int node;
-#ifdef CONFIG_PCI
- const char *path;
-#endif
-
- ft_cpu_setup(blob, bd);
-
- node = fdt_path_offset(blob, "/aliases");
- if (node >= 0) {
-#ifdef CONFIG_PCI
- path = fdt_getprop(blob, node, "pci0", NULL);
- if (path) {
- tmp[1] = hose.last_busno - hose.first_busno;
- do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
- }
-#endif
- }
-}
-#endif
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-/* TLB for CCSRBAR (IMMR) */
- SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 1, BOOKE_PAGESZ_1M, 1),
-
-/* TLB for Local Bus stuff, just map the whole 512M */
-/* note that the LBC SDRAM is cache-inhibit and guarded, like everything else */
-
- SET_TLB_ENTRY(1, 0xe0000000, 0xe0000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 2, BOOKE_PAGESZ_256M, 1),
-
- SET_TLB_ENTRY(1, 0xf0000000, 0xf0000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 3, BOOKE_PAGESZ_256M, 1),
-
-#if !defined(CONFIG_SPD_EEPROM)
- SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 4, BOOKE_PAGESZ_256M, 1),
-
- SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 5, BOOKE_PAGESZ_256M, 1),
-#endif
-
- SET_TLB_ENTRY(1, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 6, BOOKE_PAGESZ_16K, 1),
-
- SET_TLB_ENTRY(1, CONFIG_SYS_PCI_MEM_PHYS, CONFIG_SYS_PCI_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 7, BOOKE_PAGESZ_256M, 1),
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Paul Geerinckx
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <net.h>
-#include "atm.h"
-#include <i2c.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-/* used PLD registers */
-# define PLD_GCR1_REG (unsigned char *) (0x10000000 + 0)
-# define PLD_EXT_RES (unsigned char *) (0x10000000 + 10)
-# define PLD_EXT_FETH (unsigned char *) (0x10000000 + 11)
-# define PLD_EXT_LED (unsigned char *) (0x10000000 + 12)
-# define PLD_EXT_X21 (unsigned char *) (0x10000000 + 13)
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-const uint sdram_table[] = {
- /*
- * Single Read. (Offset 0 in UPMA RAM)
- */
- 0xFE2DB004, 0xF0AA7004, 0xF0A5F400, 0xF3AFFC47, /* last */
- _NOT_USED_,
- /*
- * SDRAM Initialization (offset 5 in UPMA RAM)
- *
- * This is no UPM entry point. The following definition uses
- * the remaining space to establish an initialization
- * sequence, which is executed by a RUN command.
- *
- */
- 0xFFFAF834, 0xFFE5B435, /* last */
- _NOT_USED_,
- /*
- * Burst Read. (Offset 8 in UPMA RAM)
- */
- 0xFE2DB004, 0xF0AF7404, 0xF0AFFC00, 0xF0AFFC00,
- 0xF0AFFC00, 0xF0AAF800, 0xF1A5E447, /* last */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Single Write. (Offset 18 in UPMA RAM)
- */
- 0xFE29B300, 0xF1A27304, 0xFFA5F747, /* last */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Burst Write. (Offset 20 in UPMA RAM)
- */
- 0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
- 0xF1AAF804, 0xFFA5F447, /* last */
- _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Refresh (Offset 30 in UPMA RAM)
- */
- 0xFFAC3884, 0xFFAC3404, 0xFFAFFC04, 0xFFAFFC84,
- 0xFFAFFC07, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * MRS sequence (Offset 38 in UPMA RAM)
- */
- 0xFFAAB834, 0xFFA57434, 0xFFAFFC05, /* last */
- _NOT_USED_,
- /*
- * Exception. (Offset 3c in UPMA RAM)
- */
- 0xFFAFFC04, 0xFFAFFC05, /* last */
- _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- volatile iop8xx_t *iop = &immap->im_ioport;
- volatile fec_t *fecp = &immap->im_cpm.cp_fec;
- long int size;
-
- upmconfig (UPMA, (uint *) sdram_table,
- sizeof (sdram_table) / sizeof (uint));
-
- /*
- * Preliminary prescaler for refresh (depends on number of
- * banks): This value is selected for four cycles every 62.4 us
- * with two SDRAM banks or four cycles every 31.2 us with one
- * bank. It will be adjusted after memory sizing.
- */
- memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
- memctl->memc_mar = 0x00000088;
-
- /*
- * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
- * preliminary addresses - these have to be modified after the
- * SDRAM size has been determined.
- */
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-
- memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
-
- udelay (200);
-
- /* perform SDRAM initializsation sequence */
-
- memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */
- udelay (1);
- memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */
- udelay (1);
-
- memctl->memc_mcr = 0x80004105; /* SDRAM precharge */
- udelay (1);
- memctl->memc_mcr = 0x80004030; /* SDRAM 16x autorefresh */
- udelay (1);
- memctl->memc_mcr = 0x80004138; /* SDRAM upload parameters */
- udelay (1);
-
- memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
-
- udelay (1000);
-
- /*
- * Check Bank 0 Memory Size for re-configuration
- *
- */
- size = dram_size (CONFIG_SYS_MAMR, (long *) SDRAM_BASE_PRELIM,
- SDRAM_MAX_SIZE);
-
- udelay (1000);
-
-
- memctl->memc_mamr = CONFIG_SYS_MAMR;
- udelay (1000);
-
- /*
- * Final mapping
- */
- memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V);
-
- udelay (10000);
-
- /* prepare pin multiplexing for fast ethernet */
-
- atmLoad ();
- fecp->fec_ecntrl = 0x00000004; /* rev D3 pinmux SET */
- iop->iop_pdpar |= 0x0080; /* set pin as MII_clock */
-
-
- return (size);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
- long int maxsize)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- memctl->memc_mamr = mamr_value;
-
- return (get_ram_size (base, maxsize));
-}
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
- return (0);
-}
-
-void board_serial_init (void)
-{
- ; /* nothing to do here */
-}
-
-void board_ether_init (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile iop8xx_t *iop = &immap->im_ioport;
- volatile fec_t *fecp = &immap->im_cpm.cp_fec;
-
- atmLoad ();
- fecp->fec_ecntrl = 0x00000004; /* rev D3 pinmux SET */
- iop->iop_pdpar |= 0x0080; /* set pin as MII_clock */
-}
-
-int board_early_init_f (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- volatile iop8xx_t *iop = &immap->im_ioport;
-
- /* configure the LED timing output pins - port A pin 4 */
- iop->iop_papar = 0x0800;
- iop->iop_padir = 0x0800;
-
- /* start timer 2 for the 4hz LED blink rate */
- timers->cpmt_tmr2 = 0xff2c; /* 4HZ for 64MHz */
- timers->cpmt_trr2 = 0x000003d0; /* clk/16 , prescale=256 */
- timers->cpmt_tgcr = 0x00000810; /* run timer 2 */
-
- /* chip select for PLD access */
- memctl->memc_br6 = 0x10000401;
- memctl->memc_or6 = 0xFC000908;
-
- /* PLD initial values ( set LEDs, remove reset on LXT) */
-
- *PLD_GCR1_REG = 0x06;
- *PLD_EXT_RES = 0xC0;
- *PLD_EXT_FETH = 0x40;
- *PLD_EXT_LED = 0xFF;
- *PLD_EXT_X21 = 0x04;
- return 0;
-}
-
-static void board_get_enetaddr(uchar *addr)
-{
- int i;
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpm = &immap->im_cpm;
- unsigned int rccrtmp;
-
- char default_mac_addr[] = { 0x00, 0x08, 0x01, 0x02, 0x03, 0x04 };
-
- for (i = 0; i < 6; i++)
- addr[i] = default_mac_addr[i];
-
- printf ("There is an error in the i2c driver .. /n");
- printf ("You need to fix it first....../n");
-
- rccrtmp = cpm->cp_rccr;
- cpm->cp_rccr |= 0x0020;
-
- i2c_reg_read (0xa0, 0);
- printf ("seep = '-%c-%c-%c-%c-%c-%c-'\n",
- i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0),
- i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0),
- i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0));
-
- cpm->cp_rccr = rccrtmp;
-}
-
-int misc_init_r(void)
-{
- uchar enetaddr[6];
-
- if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
- board_get_enetaddr(enetaddr);
- eth_setenv_enetaddr("ethaddr", enetaddr);
- }
-
- return 0;
-}
+++ /dev/null
-#include <common.h>
-#include <mpc8xx.h>
-#include <commproc.h>
-
-#include "atm.h"
-#include <linux/stddef.h>
-
-#define SYNC __asm__("sync")
-#define MY_ALIGN(p, a) ((char *)(((uint32)(p)+(a)-1) & ~((uint32)(a)-1)))
-
-#define FALSE 1
-#define TRUE 0
-#define OK 0
-#define ERROR -1
-
-struct atm_connection_t g_conn[NUM_CONNECTIONS] =
-{
- { NULL, 10, NULL, 10, NULL, NULL, NULL, NULL }, /* OAM */
-};
-
-struct atm_driver_t g_atm =
-{
- FALSE, /* loaded */
- FALSE, /* started */
- NULL, /* csram */
- 0, /* csram_size */
- NULL, /* am_top */
- NULL, /* ap_top */
- NULL, /* int_reload_ptr */
- NULL, /* int_serv_ptr */
- NULL, /* rbd_base_ptr */
- NULL, /* tbd_base_ptr */
- 0 /* linerate */
-};
-
-char csram[1024]; /* more than enough for doing nothing*/
-
-int atmLoad(void);
-void atmUnload(void);
-int atmMemInit(void);
-void atmIntInit(void);
-void atmApcInit(void);
-void atmAmtInit(void);
-void atmCpmInit(void);
-void atmUtpInit(void);
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmLoad
- *
- * DESCRIPTION: Basic ATM initialization.
- *
- * PARAMETERS: none
- *
- * RETURNS: OK or ERROR
- *
- ****************************************************************************/
-int atmLoad()
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
- volatile iop8xx_t *iop = &immap->im_ioport;
-
- timers->cpmt_tgcr &= 0x0FFF; SYNC; /* Disable Timer 4 */
- immap->im_cpm.cp_scc[3].scc_gsmrl = 0x0; SYNC; /* Disable SCC4 */
- iop->iop_pdpar &= 0x3FFF; SYNC; /* Disable SAR and UTOPIA */
-
- if ( atmMemInit() != OK ) return ERROR;
-
- atmIntInit();
- atmApcInit();
- atmAmtInit();
- atmCpmInit();
- atmUtpInit();
-
- g_atm.loaded = TRUE;
-
- return OK;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmUnload
- *
- * DESCRIPTION: Disables ATM and UTOPIA.
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- ****************************************************************************/
-void atmUnload()
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
- volatile iop8xx_t *iop = &immap->im_ioport;
-
- timers->cpmt_tgcr &= 0x0FFF; SYNC; /* Disable Timer 4 */
- immap->im_cpm.cp_scc[3].scc_gsmrl = 0x0; SYNC; /* Disable SCC4 */
- iop->iop_pdpar &= 0x3FFF; SYNC; /* Disable SAR and UTOPIA */
- g_atm.loaded = FALSE;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmMemInit
- *
- * DESCRIPTION:
- *
- * The ATM driver uses the following resources:
- *
- * A. Memory in DPRAM to hold
- *
- * 1/ CT = Connection Table ( RCT & TCT )
- * 2/ TCTE = Transmit Connection Table Extension
- * 3/ MPHYPT = Multi-PHY Pointing Table
- * 4/ APCP = APC Parameter Table
- * 5/ APCT_PRIO_1 = APC Table ( priority 1 for AAL1/2 )
- * 6/ APCT_PRIO_2 = APC Table ( priority 2 for VBR )
- * 7/ APCT_PRIO_3 = APC Table ( priority 3 for UBR )
- * 8/ TQ = Transmit Queue
- * 9/ AM = Address Matching Table
- * 10/ AP = Address Pointing Table
- *
- * B. Memory in cache safe RAM to hold
- *
- * 1/ INT = Interrupt Queue
- * 2/ RBD = Receive Buffer Descriptors
- * 3/ TBD = Transmit Buffer Descriptors
- *
- * This function
- * 1. clears the ATM DPRAM area,
- * 2. Allocates and clears cache safe memory,
- * 3. Initializes 'g_conn'.
- *
- * PARAMETERS: none
- *
- * RETURNS: OK or ERROR
- *
- ****************************************************************************/
-int atmMemInit()
-{
- int i;
- unsigned immr = CONFIG_SYS_IMMR;
- int total_num_rbd = 0;
- int total_num_tbd = 0;
-
- memset((char *)CONFIG_SYS_IMMR + 0x2000 + ATM_DPRAM_BEGIN, 0x00, ATM_DPRAM_SIZE);
-
- g_atm.csram_size = NUM_INT_ENTRIES * SIZE_OF_INT_ENTRY;
-
- for ( i = 0; i < NUM_CONNECTIONS; ++i ) {
- total_num_rbd += g_conn[i].num_rbd;
- total_num_tbd += g_conn[i].num_tbd;
- }
-
- g_atm.csram_size += total_num_rbd * SIZE_OF_RBD + total_num_tbd * SIZE_OF_TBD + 4;
-
- g_atm.csram = &csram[0];
- memset(&(g_atm.csram), 0x00, g_atm.csram_size);
-
- g_atm.int_reload_ptr = (uint32 *)MY_ALIGN(g_atm.csram, 4);
- g_atm.rbd_base_ptr = (struct atm_bd_t *)(g_atm.int_reload_ptr + NUM_INT_ENTRIES);
- g_atm.tbd_base_ptr = (struct atm_bd_t *)(g_atm.rbd_base_ptr + total_num_rbd);
-
- g_conn[0].rbd_ptr = g_atm.rbd_base_ptr;
- g_conn[0].tbd_ptr = g_atm.tbd_base_ptr;
- g_conn[0].ct_ptr = CT_PTR(immr);
- g_conn[0].tcte_ptr = TCTE_PTR(immr);
-
- return OK;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmIntInit
- *
- * DESCRIPTION:
- *
- * Initialization of the MPC860 ESAR Interrupt Queue.
- * This function
- * - clears all entries in the INT,
- * - sets the WRAP bit of the last INT entry,
- * - initializes the 'int_serv_ptr' attribuut of the AtmDriver structure
- * to the first INT entry.
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- * REMARKS:
- *
- * - The INT resides in external cache safe memory.
- * - The base address of the INT is stored in g_atm.int_reload_ptr.
- * - The number of entries in the INT is given by NUM_INT_ENTRIES.
- * - The INTBASE field in SAR Parameter RAM is set by atmCpmInit().
- *
- ****************************************************************************/
-void atmIntInit()
-{
- int i;
- for ( i = 0; i < NUM_INT_ENTRIES - 1; ++i) g_atm.int_reload_ptr[i] = 0;
- g_atm.int_reload_ptr[i] = INT_WRAP;
- g_atm.int_serv_ptr = g_atm.int_reload_ptr;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmApcInit
- *
- * DESCRIPTION:
- *
- * This function initializes the following ATM Pace Controller related
- * data structures:
- *
- * - 1 MPHY Pointing Table (contains only one entry)
- * - 3 APC Parameter Tables (one PHY with 3 priorities)
- * - 3 APC Tables (one table for each priority)
- * - 1 Transmit Queue (one transmit queue per PHY)
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- ****************************************************************************/
-void atmApcInit()
-{
- int i;
- /* unsigned immr = CONFIG_SYS_IMMR; */
- uint16 * mphypt_ptr = MPHYPT_PTR(CONFIG_SYS_IMMR);
- struct apc_params_t * apcp_ptr = APCP_PTR(CONFIG_SYS_IMMR);
- uint16 * apct_prio1_ptr = APCT1_PTR(CONFIG_SYS_IMMR);
- uint16 * tq_ptr = TQ_PTR(CONFIG_SYS_IMMR);
- /***************************************************/
- /* Initialize MPHY Pointing Table (only one entry) */
- /***************************************************/
- *mphypt_ptr = APCP_BASE;
-
- /********************************************/
- /* Initialize APC parameters for priority 1 */
- /********************************************/
- apcp_ptr->apct_base1 = APCT_PRIO_1_BASE;
- apcp_ptr->apct_end1 = APCT_PRIO_1_BASE + NUM_APCT_PRIO_1_ENTRIES * 2;
- apcp_ptr->apct_ptr1 = APCT_PRIO_1_BASE;
- apcp_ptr->apct_sptr1 = APCT_PRIO_1_BASE;
- apcp_ptr->etqbase = TQ_BASE;
- apcp_ptr->etqend = TQ_BASE + ( NUM_TQ_ENTRIES - 1 ) * 2;
- apcp_ptr->etqaptr = TQ_BASE;
- apcp_ptr->etqtptr = TQ_BASE;
- apcp_ptr->apc_mi = 8;
- apcp_ptr->ncits = 0x0100; /* NCITS = 1 */
- apcp_ptr->apcnt = 0;
- apcp_ptr->reserved1 = 0;
- apcp_ptr->eapcst = 0x2009; /* LAST, ESAR, MPHY */
- apcp_ptr->ptp_counter = 0;
- apcp_ptr->ptp_txch = 0;
- apcp_ptr->reserved2 = 0;
-
-
- /***************************************************/
- /* Initialize APC Tables with empty slots (0xFFFF) */
- /***************************************************/
- for ( i = 0; i < NUM_APCT_PRIO_1_ENTRIES; ++i ) *(apct_prio1_ptr++) = 0xFFFF;
-
- /************************/
- /* Clear Transmit Queue */
- /************************/
- for ( i = 0; i < NUM_TQ_ENTRIES; ++i ) *(tq_ptr++) = 0;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmAmtInit
- *
- * DESCRIPTION:
- *
- * This function clears the first entry in the Address Matching Table and
- * lets the first entry in the Address Pointing table point to the first
- * entry in the TCT table (i.e. the raw cell channel).
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- * REMARKS:
- *
- * The values for the AMBASE, AMEND and APBASE registers in SAR parameter
- * RAM are initialized by atmCpmInit().
- *
- ****************************************************************************/
-void atmAmtInit()
-{
- unsigned immr = CONFIG_SYS_IMMR;
-
- g_atm.am_top = AM_PTR(immr);
- g_atm.ap_top = AP_PTR(immr);
-
- *(g_atm.ap_top--) = CT_BASE;
- *(g_atm.am_top--) = 0;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmCpmInit
- *
- * DESCRIPTION:
- *
- * This function initializes the Utopia Interface Parameter RAM Map
- * (SCC4, ATM Protocol) of the Communication Processor Modudule.
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- ****************************************************************************/
-void atmCpmInit()
-{
- unsigned immr = CONFIG_SYS_IMMR;
-
- memset((char *)immr + 0x3F00, 0x00, 0xC0);
-
- /*-----------------------------------------------------------------*/
- /* RBDBASE - Receive buffer descriptors base address */
- /* The RBDs reside in cache safe external memory. */
- /*-----------------------------------------------------------------*/
- *RBDBASE(immr) = (uint32)g_atm.rbd_base_ptr;
-
- /*-----------------------------------------------------------------*/
- /* SRFCR - SAR receive function code */
- /* 0-2 rsvd = 000 */
- /* 3-4 BO = 11 Byte ordering (big endian). */
- /* 5-7 FC = 000 Value driven on the address type signals AT[1-3] */
- /* when the SDMA channel accesses memory. */
- /*-----------------------------------------------------------------*/
- *SRFCR(immr) = 0x18;
-
- /*-----------------------------------------------------------------*/
- /* SRSTATE - SAR receive status */
- /* 0 EXT = 0 Extended mode off. */
- /* 1 ACP = 0 Valid only if EXT = 1. */
- /* 2 EC = 0 Standard 53-byte ATM cell. */
- /* 3 SNC = 0 In sync. Must be set to 0 during initialization. */
- /* 4 ESAR = 1 Enhanced SAR functionality enabled. */
- /* 5 MCF = 1 Management Cell Filter active. */
- /* 6 SER = 0 UTOPIA mode. */
- /* 7 MPY = 1 Multiple PHY mode. */
- /*-----------------------------------------------------------------*/
- *SRSTATE(immr) = 0x0D;
-
- /*-----------------------------------------------------------------*/
- /* MRBLR - Maximum receive buffer length register. */
- /* Must be cleared for ATM operation (see also SMRBLR). */
- /*-----------------------------------------------------------------*/
- *MRBLR(immr) = 0;
-
- /*-----------------------------------------------------------------*/
- /* RSTATE - SCC internal receive state parameters */
- /* The first byte must be initialized with the value of SRFCR. */
- /*-----------------------------------------------------------------*/
- *RSTATE(immr) = (uint32)(*SRFCR(immr)) << 24;
-
- /*-----------------------------------------------------------------*/
- /* STFCR - SAR transmit function code */
- /* 0-2 rsvd = 000 */
- /* 3-4 BO = 11 Byte ordering (big endian). */
- /* 5-7 FC = 000 Value driven on the address type signals AT[1-3] */
- /* when the SDMA channel accesses memory. */
- /*-----------------------------------------------------------------*/
- *STFCR(immr) = 0x18;
-
- /*-----------------------------------------------------------------*/
- /* SRSTATE - SAR transmit status */
- /* 0 EXT = 0 : Extended mode off */
- /* 1 rsvd = 0 : */
- /* 2 EC = 0 : Standard 53-byte ATM cell */
- /* 3 rsvd = 0 : */
- /* 4 ESAR = 1 : Enhanced SAR functionality enabled */
- /* 5 rsvd = 0 : */
- /* 6 SER = 0 : UTOPIA mode */
- /* 7 MPY = 1 : Multiple PHY mode */
- /*-----------------------------------------------------------------*/
- *STSTATE(immr) = 0x09;
-
- /*-----------------------------------------------------------------*/
- /* TBDBASE - Transmit buffer descriptors base address */
- /* The TBDs reside in cache safe external memory. */
- /*-----------------------------------------------------------------*/
- *TBDBASE(immr) = (uint32)g_atm.tbd_base_ptr;
-
- /*-----------------------------------------------------------------*/
- /* TSTATE - SCC internal transmit state parameters */
- /* The first byte must be initialized with the value of STFCR. */
- /*-----------------------------------------------------------------*/
- *TSTATE(immr) = (uint32)(*STFCR(immr)) << 24;
-
- /*-----------------------------------------------------------------*/
- /* CTBASE - Connection table base address */
- /* Offset from the beginning of DPRAM (64-byte aligned). */
- /*-----------------------------------------------------------------*/
- *CTBASE(immr) = CT_BASE;
-
- /*-----------------------------------------------------------------*/
- /* INTBASE - Interrupt queue base pointer. */
- /* The interrupt queue resides in cache safe external memory. */
- /*-----------------------------------------------------------------*/
- *INTBASE(immr) = (uint32)g_atm.int_reload_ptr;
-
- /*-----------------------------------------------------------------*/
- /* INTPTR - Pointer into interrupt queue. */
- /* Initialize to INTBASE. */
- /*-----------------------------------------------------------------*/
- *INTPTR(immr) = *INTBASE(immr);
-
- /*-----------------------------------------------------------------*/
- /* C_MASK - Constant mask for CRC32 */
- /* Must be initialized to 0xDEBB20E3. */
- /*-----------------------------------------------------------------*/
- *C_MASK(immr) = 0xDEBB20E3;
-
- /*-----------------------------------------------------------------*/
- /* INT_ICNT - Interrupt threshold value */
- /*-----------------------------------------------------------------*/
- *INT_ICNT(immr) = 1;
-
- /*-----------------------------------------------------------------*/
- /* INT_CNT - Interrupt counter */
- /* Initalize to INT_ICNT. Decremented for each interrupt entry */
- /* reported in the interrupt queue. On zero an interrupt is */
- /* signaled to the host by setting the GINT bit in the event */
- /* register. The counter is reinitialized with INT_ICNT. */
- /*-----------------------------------------------------------------*/
- *INT_CNT(immr) = *INT_ICNT(immr);
-
- /*-----------------------------------------------------------------*/
- /* SMRBLR - SAR maximum receive buffer length register. */
- /* Must be a multiple of 48 bytes. Common for all ATM connections. */
- /*-----------------------------------------------------------------*/
- *SMRBLR(immr) = SAR_RXB_SIZE;
-
- /*-----------------------------------------------------------------*/
- /* APCST - APC status register. */
- /* 0 rsvd 0 */
- /* 1-2 CSER 11 Initialize with the same value as NSER. */
- /* 3-4 NSER 11 Next serial or UTOPIA channel. */
- /* 5-7 rsvd 000 */
- /* 8-10 rsvd 000 */
- /* 11 rsvd 0 */
- /* 12 ESAR 1 UTOPIA Level 2 MPHY enabled. */
- /* 13 DIS 0 APC disable. Must be initiazed to 0. */
- /* 14 PL2 0 Not used. */
- /* 15 MPY 1 Multiple PHY mode on. */
- /*-----------------------------------------------------------------*/
- *APCST(immr) = 0x7809;
-
- /*-----------------------------------------------------------------*/
- /* APCPTR - Pointer to the APC parameter table */
- /* In MPHY master mode this parameter points to the MPHY pointing */
- /* table. 2-byte aligned. */
- /*-----------------------------------------------------------------*/
- *APCPTR(immr) = MPHYPT_BASE;
-
- /*-----------------------------------------------------------------*/
- /* HMASK - Header mask */
- /* Each incoming cell is masked with HMASK before being compared */
- /* to the entries in the address matching table. */
- /*-----------------------------------------------------------------*/
- *HMASK(immr) = AM_HMASK;
-
- /*-----------------------------------------------------------------*/
- /* AMBASE - Address matching table base address */
- /*-----------------------------------------------------------------*/
- *AMBASE(immr) = AM_BASE;
-
- /*-----------------------------------------------------------------*/
- /* AMEND - Address matching table end address */
- /*-----------------------------------------------------------------*/
- *AMEND(immr) = AM_BASE;
-
- /*-----------------------------------------------------------------*/
- /* APBASE - Address pointing table base address */
- /*-----------------------------------------------------------------*/
- *APBASE(immr) = AP_BASE;
-
- /*-----------------------------------------------------------------*/
- /* MPHYST - MPHY status register */
- /* 0-1 rsvd 00 */
- /* 2-6 NMPHY 00000 1 PHY */
- /* 7-9 rsvd 000 */
- /* 10-14 CMPHY 00000 Initialize with same value as NMPHY */
- /*-----------------------------------------------------------------*/
- *MPHYST(immr) = 0x0000;
-
- /*-----------------------------------------------------------------*/
- /* TCTEBASE - Transmit connection table extension base address */
- /* Offset from the beginning of DPRAM (32-byte aligned). */
- /*-----------------------------------------------------------------*/
- *TCTEBASE(immr) = TCTE_BASE;
-
- /*-----------------------------------------------------------------*/
- /* Clear not used registers. */
- /*-----------------------------------------------------------------*/
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmUtpInit
- *
- * DESCRIPTION:
- *
- * This function initializes the ATM interface for
- *
- * - UTOPIA mode
- * - muxed bus
- * - master operation
- * - multi PHY (because of a bug in the MPC860P rev. E.0)
- * - internal clock = SYSCLK / 2
- *
- * EXTERNAL EFFECTS:
- *
- * After calling this function, the MPC860ESAR UTOPIA bus is
- * active and uses the following ports/pins:
- *
- * Port Pin Signal Description
- * ------ --- ------- -------------------------------------------
- * PB[15] R17 TxClav Transmit cell available input/output signal
- * PC[15] D16 RxClav Receive cell available input/output signal
- * PD[15] U17 UTPB[0] UTOPIA bus bit 0 input/output signal
- * PD[14] V19 UTPB[1] UTOPIA bus bit 1 input/output signal
- * PD[13] V18 UTPB[2] UTOPIA bus bit 2 input/output signal
- * PD[12] R16 UTPB[3] UTOPIA bus bit 3 input/output signal
- * PD[11] T16 RXENB Receive enable input/output signal
- * PD[10] W18 TXENB Transmit enable input/output signal
- * PD[9] V17 UTPCLK UTOPIA clock input/output signal
- * PD[7] T15 UTPB[4] UTOPIA bus bit 4 input/output signal
- * PD[6] V16 UTPB[5] UTOPIA bus bit 5 input/output signal
- * PD[5] U15 UTPB[6] UTOPIA bus bit 6 input/output signal
- * PD[4] U16 UTPB[7] UTOPIA bus bit 7 input/output signal
- * PD[3] W16 SOC Start of cell input/output signal
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- * REMARK:
- *
- * The ATM parameters and data structures must be configured before
- * initializing the UTOPIA port. The UTOPIA port activates immediately
- * upon initialization, and if its associated data structures are not
- * initialized, the CPM will lock up.
- *
- ****************************************************************************/
-void atmUtpInit()
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile iop8xx_t *iop = &immap->im_ioport;
- volatile car8xx_t *car = &immap->im_clkrst;
- volatile cpm8xx_t *cpm = &immap->im_cpm;
- int flag;
-
- flag = disable_interrupts();
-
- /*-----------------------------------------------------------------*/
- /* SCCR - System Clock Control Register */
- /* */
- /* The UTOPIA clock can be selected to be internal clock or */
- /* external clock (selected by the UTOPIA mode register). */
- /* In case of internal clock, the UTOPIA clock is derived from */
- /* the system frequency divided by two dividers. */
- /* Bits 27-31 of the SCCR register are defined to control the */
- /* UTOPIA clock. */
- /* */
- /* SCCR[27:29] DFUTP Division factor. Divide the system clock */
- /* by 2^DFUTP. */
- /* SCCR[30:31] DFAUTP Additional division factor. Divide the */
- /* system clock by the following value: */
- /* 00 = divide by 1 */
- /* 00 = divide by 3 */
- /* 10 = divide by 5 */
- /* 11 = divide by 7 */
- /* */
- /* Note that the UTOPIA clock must be programmed as to operate */
- /* within the range SYSCLK/10 .. 50MHz. */
- /*-----------------------------------------------------------------*/
- car->car_sccr &= 0xFFFFFFE0;
- car->car_sccr |= 0x00000008; /* UTPCLK = SYSCLK / 4 */
-
- /*-----------------------------------------------------------------*/
- /* RCCR - RISC Controller Configuration Register */
- /* */
- /* RCCR[8] DR1M IDMA Request 0 Mode */
- /* 0 = edge sensitive */
- /* 1 = level sensitive */
- /* RCCR[9] DR0M IDMA Request 0 Mode */
- /* 0 = edge sensitive */
- /* 1 = level sensitive */
- /* RCCR[10:11] DRQP IDMA Request Priority */
- /* 00 = IDMA req. have more prio. than SCCs */
- /* 01 = IDMA req. have less prio. then SCCs */
- /* 10 = IDMA requests have the lowest prio. */
- /* 11 = reserved */
- /* */
- /* The RCCR[DR0M] and RCCR[DR1M] bits must be set to enable UTOPIA */
- /* operation. Also, program RCCR[DPQP] to 01 to give SCC transfers */
- /* higher priority. */
- /*-----------------------------------------------------------------*/
- cpm->cp_rccr &= 0xFF0F;
- cpm->cp_rccr |= 0x00D0;
-
- /*-----------------------------------------------------------------*/
- /* Port B - TxClav Signal */
- /*-----------------------------------------------------------------*/
- cpm->cp_pbpar |= 0x00010000; /* PBPAR[15] = 1 */
- cpm->cp_pbdir &= 0xFFFEFFFF; /* PBDIR[15] = 0 */
-
- /*-----------------------------------------------------------------*/
- /* UTOPIA Mode Register */
- /* */
- /* - muxed bus (master operation only) */
- /* - multi PHY (because of a bug in the MPC860P rev.E.0) */
- /* - internal clock */
- /* - no loopback */
- /* - do no activate statistical counters */
- /*-----------------------------------------------------------------*/
- iop->utmode = 0x00000004; SYNC;
-
- /*-----------------------------------------------------------------*/
- /* Port D - UTOPIA Data and Control Signals */
- /* */
- /* 15-12 UTPB[0:3] UTOPIA bus bit 0 - 3 input/output signals */
- /* 11 RXENB UTOPIA receive enable input/output signal */
- /* 10 TXENB UTOPIA transmit enable input/output signal */
- /* 9 TUPCLK UTOPIA clock input/output signal */
- /* 8 MII-MDC Used by MII in simult. MII and UTOPIA operation */
- /* 7-4 UTPB[4:7] UTOPIA bus bit 4 - 7 input/output signals */
- /* 3 SOC UTOPIA Start of cell input/output signal */
- /* 2 Reserved */
- /* 1 Enable UTOPIA mode */
- /* 0 Enable SAR */
- /*-----------------------------------------------------------------*/
- iop->iop_pdpar |= 0xDF7F; SYNC;
- iop->iop_pddir &= 0x2080; SYNC;
-
- /*-----------------------------------------------------------------*/
- /* Port C - RxClav Signal */
- /*-----------------------------------------------------------------*/
- iop->iop_pcpar |= 0x0001; /* PCPAR[15] = 1 */
- iop->iop_pcdir &= 0xFFFE; /* PCDIR[15] = 0 */
- iop->iop_pcso &= 0xFFFE; /* PCSO[15] = 0 */
-
- if (flag)
- enable_interrupts();
-}
+++ /dev/null
-typedef unsigned char uint8;
-typedef unsigned short uint16;
-typedef unsigned int uint32;
-typedef volatile unsigned char vuint8;
-typedef volatile unsigned short vuint16;
-typedef volatile unsigned int vuint32;
-
-
-#define DPRAM_ATM CONFIG_SYS_IMMR + 0x3000
-
-#define ATM_DPRAM_BEGIN (DPRAM_ATM - CONFIG_SYS_IMMR - 0x2000)
-#define NUM_CONNECTIONS 1
-#define SAR_RXB_SIZE 1584
-#define AM_HMASK 0x0FFFFFF0
-
-#define NUM_CT_ENTRIES (NUM_CONNECTIONS)
-#define NUM_TCTE_ENTRIES (NUM_CONNECTIONS)
-#define NUM_AM_ENTRIES (NUM_CONNECTIONS+1)
-#define NUM_AP_ENTRIES (NUM_CONNECTIONS+1)
-#define NUM_MPHYPT_ENTRIES 1
-#define NUM_APCP_ENTRIES 1
-#define NUM_APCT_PRIO_1_ENTRIES 146 /* Determines minimum rate */
-#define NUM_TQ_ENTRIES 12
-
-#define SIZE_OF_CT_ENTRY 64
-#define SIZE_OF_TCTE_ENTRY 32
-#define SIZE_OF_AM_ENTRY 4
-#define SIZE_OF_AP_ENTRY 2
-#define SIZE_OF_MPHYPT_ENTRY 2
-#define SIZE_OF_APCP_ENTRY 32
-#define SIZE_OF_APCT_ENTRY 2
-#define SIZE_OF_TQ_ENTRY 2
-
-#define CT_BASE ((ATM_DPRAM_BEGIN + 63) & 0xFFC0) /*64 */
-#define TCTE_BASE (CT_BASE + NUM_CT_ENTRIES * SIZE_OF_CT_ENTRY) /*32 */
-#define APCP_BASE (TCTE_BASE + NUM_TCTE_ENTRIES * SIZE_OF_TCTE_ENTRY) /*32 */
-#define AM_BEGIN (APCP_BASE + NUM_APCP_ENTRIES * SIZE_OF_APCP_ENTRY) /*4 */
-#define AM_BASE (AM_BEGIN + (NUM_AM_ENTRIES - 1) * SIZE_OF_AM_ENTRY)
-#define AP_BEGIN (AM_BEGIN + NUM_AM_ENTRIES * SIZE_OF_AM_ENTRY) /*2 */
-#define AP_BASE (AP_BEGIN + (NUM_AP_ENTRIES - 1) * SIZE_OF_AP_ENTRY)
-#define MPHYPT_BASE (AP_BEGIN + NUM_AP_ENTRIES * SIZE_OF_AP_ENTRY) /*2 */
-#define APCT_PRIO_1_BASE (MPHYPT_BASE + NUM_MPHYPT_ENTRIES * SIZE_OF_MPHYPT_ENTRY) /*2 */
-#define TQ_BASE (APCT_PRIO_1_BASE + NUM_APCT_PRIO_1_ENTRIES * SIZE_OF_APCT_ENTRY) /*2 */
-#define ATM_DPRAM_SIZE ((TQ_BASE + NUM_TQ_ENTRIES * SIZE_OF_TQ_ENTRY) - ATM_DPRAM_BEGIN)
-
-#define CT_PTR(base) ((struct ct_entry_t *)((char *)(base) + 0x2000 + CT_BASE))
-#define TCTE_PTR(base) ((struct tcte_entry_t *)((char *)(base) + 0x2000 + TCTE_BASE))
-#define AM_PTR(base) ((uint32 *)((char *)(base) + 0x2000 + AM_BASE))
-#define AP_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + AP_BASE))
-#define MPHYPT_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + MPHYPT_BASE))
-#define APCP_PTR(base) ((struct apc_params_t *)((char*)(base) + 0x2000 + APCP_BASE))
-#define APCT1_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_1_BASE))
-#define APCT2_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_2_BASE))
-#define APCT3_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_3_BASE))
-#define TQ_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + TQ_BASE))
-
-/* SAR registers */
-#define RBDBASE(base) ((vuint32 *)(base + 0x3F00)) /* Base address of RxBD-List */
-#define SRFCR(base) ((vuint8 *)(base + 0x3F04)) /* DMA Receive function code */
-#define SRSTATE(base) ((vuint8 *)(base + 0x3F05)) /* DMA Receive status */
-#define MRBLR(base) ((vuint16 *)(base + 0x3F06)) /* Init to 0 for ATM */
-#define RSTATE(base) ((vuint32 *)(base + 0x3F08)) /* Do not write to */
-#define R_CNT(base) ((vuint16 *)(base + 0x3F10)) /* Do not write to */
-#define STFCR(base) ((vuint8 *)(base + 0x3F12)) /* DMA Transmit function code */
-#define STSTATE(base) ((vuint8 *)(base + 0x3F13)) /* DMA Transmit status */
-#define TBDBASE(base) ((vuint32 *)(base + 0x3F14)) /* Base address of TxBD-List */
-#define TSTATE(base) ((vuint32 *)(base + 0x3F18)) /* Do not write to */
-#define COMM_CH(base) ((vuint16 *)(base + 0x3F1C)) /* Command channel */
-#define STCHNUM(base) ((vuint16 *)(base + 0x3F1E)) /* Do not write to */
-#define T_CNT(base) ((vuint16 *)(base + 0x3F20)) /* Do not write to */
-#define CTBASE(base) ((vuint16 *)(base + 0x3F22)) /* Base address of Connection-table */
-#define ECTBASE(base) ((vuint32 *)(base + 0x3F24)) /* Valid only for external Conn.-table */
-#define INTBASE(base) ((vuint32 *)(base + 0x3F28)) /* Base address of Interrupt-table */
-#define INTPTR(base) ((vuint32 *)(base + 0x3F2C)) /* Pointer to Interrupt-queue */
-#define C_MASK(base) ((vuint32 *)(base + 0x3F30)) /* CRC-mask */
-#define SRCHNUM(base) ((vuint16 *)(base + 0x3F34)) /* Do not write to */
-#define INT_CNT(base) ((vuint16 *)(base + 0x3F36)) /* Interrupt-Counter */
-#define INT_ICNT(base) ((vuint16 *)(base + 0x3F38)) /* Interrupt threshold */
-#define TSTA(base) ((vuint16 *)(base + 0x3F3A)) /* Time-stamp-address */
-#define OLDLEN(base) ((vuint16 *)(base + 0x3F3C)) /* Do not write to */
-#define SMRBLR(base) ((vuint16 *)(base + 0x3F3E)) /* SAR max RXBuffer length */
-#define EHEAD(base) ((vuint32 *)(base + 0x3F40)) /* Valid for serial mode */
-#define EPAYLOAD(base) ((vuint32 *)(base + 0x3F44)) /* Valid for serial mode */
-#define TQBASE(base) ((vuint16 *)(base + 0x3F48)) /* Base address of Tx queue */
-#define TQEND(base) ((vuint16 *)(base + 0x3F4A)) /* End address of Tx queue */
-#define TQAPTR(base) ((vuint16 *)(base + 0x3F4C)) /* TQ APC pointer */
-#define TQTPTR(base) ((vuint16 *)(base + 0x3F4E)) /* TQ Tx pointer */
-#define APCST(base) ((vuint16 *)(base + 0x3F50)) /* APC status */
-#define APCPTR(base) ((vuint16 *)(base + 0x3F52)) /* APC parameter pointer */
-#define HMASK(base) ((vuint32 *)(base + 0x3F54)) /* Header mask */
-#define AMBASE(base) ((vuint16 *)(base + 0x3F58)) /* Address match table base */
-#define AMEND(base) ((vuint16 *)(base + 0x3F5A)) /* Address match table end */
-#define APBASE(base) ((vuint16 *)(base + 0x3F5C)) /* Address match parameter */
-#define FLBASE(base) ((vuint32 *)(base + 0x3F54)) /* First-level table base */
-#define SLBASE(base) ((vuint32 *)(base + 0x3F58)) /* Second-level table base */
-#define FLMASK(base) ((vuint16 *)(base + 0x3F5C)) /* First-level mask */
-#define ECSIZE(base) ((vuint16 *)(base + 0x3F5E)) /* Valid for extended mode */
-#define APCT_REAL(base) ((vuint32 *)(base + 0x3F60)) /* APC 32 bit counter */
-#define R_PTR(base) ((vuint32 *)(base + 0x3F64)) /* Do not write to */
-#define RTEMP(base) ((vuint32 *)(base + 0x3F68)) /* Do not write to */
-#define T_PTR(base) ((vuint32 *)(base + 0x3F6C)) /* Do not write to */
-#define TTEMP(base) ((vuint32 *)(base + 0x3F70)) /* Do not write to */
-
-/* ESAR registers */
-#define FMCTIMESTMP(base) ((vuint32 *)(base + 0x3F80)) /* Perf.Mon.Timestamp */
-#define FMCTEMPLATE(base) ((vuint32 *)(base + 0x3F84)) /* Perf.Mon.Template */
-#define PMPTR(base) ((vuint16 *)(base + 0x3F88)) /* Perf.Mon.Table */
-#define PMCHANNEL(base) ((vuint16 *)(base + 0x3F8A)) /* Perf.Mon.Channel */
-#define MPHYST(base) ((vuint16 *)(base + 0x3F90)) /* Multi-PHY Status */
-#define TCTEBASE(base) ((vuint16 *)(base + 0x3F92)) /* Internal TCT Extension Base */
-#define ETCTEBASE(base) ((vuint32 *)(base + 0x3F94)) /* External TCT Extension Base */
-#define COMM_CH2(base) ((vuint32 *)(base + 0x3F98)) /* 2nd command channel word */
-#define STATBASE(base) ((vuint16 *)(base + 0x3F9C)) /* Statistics table pointer */
-
-/* UTOPIA Mode Register */
-#define UTMODE(base) (CAST(vuint32 *)(base + 0x0978))
-
-/* SAR commands */
-#define TRANSMIT_CHANNEL_ACTIVATE_CMD 0x0FC1
-#define TRANSMIT_CHANNEL_DEACTIVATE_CMD 0x1FC1
-#define STOP_TRANSMIT_CMD 0x2FC1
-#define RESTART_TRANSMIT_CMD 0x3FC1
-#define STOP_RECEIVE_CMD 0x4FC1
-#define RESTART_RECEIVE_CMD 0x5FC1
-#define APC_BYPASS_CMD 0x6FC1
-#define MEM_WRITE_CMD 0x7FC1
-#define CPCR_FLG 0x0001
-
-/* INT flags */
-#define INT_VALID 0x80000000
-#define INT_WRAP 0x40000000
-#define INT_APCO 0x00800000
-#define INT_TQF 0x00200000
-#define INT_RXF 0x00080000
-#define INT_BSY 0x00040000
-#define INT_TXB 0x00020000
-#define INT_RXB 0x00010000
-
-#define NUM_INT_ENTRIES 80
-#define SIZE_OF_INT_ENTRY 4
-
-struct apc_params_t {
- vuint16 apct_base1; /* APC Table - First Priority Base pointer */
- vuint16 apct_end1; /* First APC Table - Length */
- vuint16 apct_ptr1; /* First APC Table Pointer */
- vuint16 apct_sptr1; /* APC Table First Priority Service pointer */
- vuint16 etqbase; /* Enhanced Transmit Queue Base pointer */
- vuint16 etqend; /* Enhanced Transmit Queue End pointer */
- vuint16 etqaptr; /* Enhanced Transmit Queue APC pointer */
- vuint16 etqtptr; /* Enhanced Transmit Queue Transmitter pointer */
- vuint16 apc_mi; /* APC - Max Iteration */
- vuint16 ncits; /* Number of Cells In TimeSlot */
- vuint16 apcnt; /* APC - N Timer */
- vuint16 reserved1; /* reserved */
- vuint16 eapcst; /* APC status */
- vuint16 ptp_counter; /* PTP queue length */
- vuint16 ptp_txch; /* PTP channel */
- vuint16 reserved2; /* reserved */
-};
-
-struct ct_entry_t {
- /* RCT */
- unsigned fhnt:1;
- unsigned pm_rct:1;
- unsigned reserved0:6;
- unsigned hec:1;
- unsigned clp:1;
- unsigned cng_ncrc:1;
- unsigned inf_rct:1;
- unsigned cngi_ptp:1;
- unsigned cdis_rct:1;
- unsigned aal_rct:2;
- uint16 rbalen;
- uint32 rcrc;
- uint32 rb_ptr;
- uint16 rtmlen;
- uint16 rbd_ptr;
- uint16 rbase;
- uint16 tstamp;
- uint16 imask;
- unsigned ft:2;
- unsigned nim:1;
- unsigned reserved1:2;
- unsigned rpmt:6;
- unsigned reserved2:5;
- uint8 reserved3[8];
- /* TCT */
- unsigned reserved4:1;
- unsigned pm_tct:1;
- unsigned reserved5:6;
- unsigned pc:1;
- unsigned reserved6:2;
- unsigned inf_tct:1;
- unsigned cr10:1;
- unsigned cdis_tct:1;
- unsigned aal_tct:2;
- uint16 tbalen;
- uint32 tcrc;
- uint32 tb_ptr;
- uint16 ttmlen;
- uint16 tbd_ptr;
- uint16 tbase;
- unsigned reserved7:5;
- unsigned tpmt:6;
- unsigned reserved8:3;
- unsigned avcf:1;
- unsigned act:1;
- uint32 chead;
- uint16 apcl;
- uint16 apcpr;
- unsigned out:1;
- unsigned bnr:1;
- unsigned tservice:2;
- unsigned apcp:12;
- uint16 apcpf;
-};
-
-struct tcte_entry_t {
- unsigned res1:4;
- unsigned scr:12;
- uint16 scrf;
- uint16 bt;
- uint16 buptrh;
- uint32 buptrl;
- unsigned vbr2:1;
- unsigned res2:15;
- uint16 oobr;
- uint16 res3[8];
-};
-
-#define SIZE_OF_RBD 12
-#define SIZE_OF_TBD 12
-
-struct atm_bd_t {
- vuint16 flags;
- vuint16 length;
- unsigned char *buffer_ptr;
- vuint16 cpcs_uu_cpi;
- vuint16 reserved;
-};
-
-/* BD flags */
-#define EMPTY 0x8000
-#define READY 0x8000
-#define WRAP 0x2000
-#define INTERRUPT 0x1000
-#define LAST 0x0800
-#define FIRST 0x0400
-#define OAM 0x0400
-#define CONTINUOUS 0x0200
-#define HEC_ERROR 0x0080
-#define CELL_LOSS 0x0040
-#define CONGESTION 0x0020
-#define ABORT 0x0010
-#define LEN_ERROR 0x0002
-#define CRC_ERROR 0x0001
-
-struct atm_connection_t {
- struct atm_bd_t *rbd_ptr;
- int num_rbd;
- struct atm_bd_t *tbd_ptr;
- int num_tbd;
- struct ct_entry_t *ct_ptr;
- struct tcte_entry_t *tcte_ptr;
- void *drv;
- void (*notify) (void *drv, int event);
-};
-
-struct atm_driver_t {
- int loaded;
- int started;
- char *csram;
- int csram_size;
- uint32 *am_top;
- uint16 *ap_top;
- uint32 *int_reload_ptr;
- uint32 *int_serv_ptr;
- struct atm_bd_t *rbd_base_ptr;
- struct atm_bd_t *tbd_base_ptr;
- unsigned linerate_in_bps;
-};
-
-extern struct atm_connection_t g_conn[NUM_CONNECTIONS];
-extern struct atm_driver_t g_atm;
-
-extern int atmLoad (void);
-extern void atmUnload (void);
+++ /dev/null
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size, size<<20);
- }
-
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
- /* Re-do sizing to get full correct info */
- size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_info[0].size = size;
-
- return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- ulong value;
- ulong base = (ulong)addr;
-
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00900090;
-
- value = addr[0];
-
- switch (value) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- value = addr[1]; /* device ID */
-
- switch (value) {
- case AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#if 0 /* enable when device IDs are available */
- case AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr = (volatile unsigned long *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr = (volatile unsigned long *)info->start[0];
-
- *addr = 0x00F000F0; /* reset bank */
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_long*)(info->start[sect]);
- addr[0] = 0x00300030;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_long*)(info->start[l_sect]);
- while ((addr[0] & 0x00800080) != 0x00800080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
- DONE:
- /* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
- addr[0] = 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00A000A0;
-
- *((vu_long *)dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
+++ /dev/null
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
- net/libnet.o (.text*)
- drivers/rtc/librtc.o (.text*)
-
- . = env_offset;
- common/env_embedded.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common $(obj)../../tqc/tqm8xx)
-endif
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS = scm.o flash.o fpga_scm.o ../common/fpga.o \
- ../../tqc/tqm8xx/load_sernum_ethaddr.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Flash Routines for AMD devices on the TQM8260 board
- *
- *--------------------------------------------------------------------
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#define V_ULONG(a) (*(volatile unsigned long *)( a ))
-#define V_BYTE(a) (*(volatile unsigned char *)( a ))
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-/*-----------------------------------------------------------------------
- */
-void flash_reset (void)
-{
- if (flash_info[0].flash_id != FLASH_UNKNOWN) {
- V_ULONG (flash_info[0].start[0]) = 0x00F000F0;
- V_ULONG (flash_info[0].start[0] + 4) = 0x00F000F0;
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-ulong flash_get_size (ulong baseaddr, flash_info_t * info)
-{
- short i;
- unsigned long flashtest_h, flashtest_l;
-
- /* Write auto select command sequence and test FLASH answer */
- V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (baseaddr + ((ulong) 0x02AA << 3)) = 0x00550055;
- V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00900090;
- V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (baseaddr + 4 + ((ulong) 0x02AA << 3)) = 0x00550055;
- V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00900090;
-
- flashtest_h = V_ULONG (baseaddr); /* manufacturer ID */
- flashtest_l = V_ULONG (baseaddr + 4);
-
- switch ((int) flashtest_h) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- flashtest_h = V_ULONG (baseaddr + 8); /* device ID */
- flashtest_l = V_ULONG (baseaddr + 12);
- if (flashtest_h != flashtest_l) {
- info->flash_id = FLASH_UNKNOWN;
- } else {
- switch (flashtest_h) {
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00400000;
- break; /* 4 * 1 MB = 4 MB */
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00400000;
- break; /* 4 * 1 MB = 4 MB */
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00800000;
- break; /* 4 * 2 MB = 8 MB */
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00800000;
- break; /* 4 * 2 MB = 8 MB */
- case AMD_ID_DL322T:
- info->flash_id += FLASH_AMDL322T;
- info->sector_count = 71;
- info->size = 0x01000000;
- break; /* 4 * 4 MB = 16 MB */
- case AMD_ID_DL322B:
- info->flash_id += FLASH_AMDL322B;
- info->sector_count = 71;
- info->size = 0x01000000;
- break; /* 4 * 4 MB = 16 MB */
- case AMD_ID_DL323T:
- info->flash_id += FLASH_AMDL323T;
- info->sector_count = 71;
- info->size = 0x01000000;
- break; /* 4 * 4 MB = 16 MB */
- case AMD_ID_DL323B:
- info->flash_id += FLASH_AMDL323B;
- info->sector_count = 71;
- info->size = 0x01000000;
- break; /* 4 * 4 MB = 16 MB */
- case AMD_ID_LV640U:
- info->flash_id += FLASH_AM640U;
- info->sector_count = 128;
- info->size = 0x02000000;
- break; /* 4 * 8 MB = 32 MB */
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* no or unknown flash */
- }
- }
-
- if (flashtest_h == AMD_ID_LV640U) {
-
- /* set up sector start adress table (uniform sector type) */
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = baseaddr + (i * 0x00040000);
-
- } else if (info->flash_id & FLASH_BTYPE) {
-
- /* set up sector start adress table (bottom sector type) */
- info->start[0] = baseaddr + 0x00000000;
- info->start[1] = baseaddr + 0x00010000;
- info->start[2] = baseaddr + 0x00018000;
- info->start[3] = baseaddr + 0x00020000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = baseaddr + (i * 0x00040000) - 0x000C0000;
- }
-
- } else {
-
- /* set up sector start adress table (top sector type) */
- i = info->sector_count - 1;
- info->start[i--] = baseaddr + info->size - 0x00010000;
- info->start[i--] = baseaddr + info->size - 0x00018000;
- info->start[i--] = baseaddr + info->size - 0x00020000;
- for (; i >= 0; i--) {
- info->start[i] = baseaddr + i * 0x00040000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- if ((V_ULONG (info->start[i] + 16) & 0x00010001) ||
- (V_ULONG (info->start[i] + 20) & 0x00010001)) {
- info->protect[i] = 1; /* D0 = 1 if protected */
- } else {
- info->protect[i] = 0;
- }
- }
-
- flash_reset ();
- return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-unsigned long flash_init (void)
-{
- unsigned long size_b0 = 0;
- int i;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here (only one bank) */
-
- size_b0 = flash_get_size (CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
- if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0 >> 20);
- }
-
- /*
- * protect monitor and environment sectors
- */
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-#endif
-
- return (size_b0);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf ("AMD ");
- break;
- case FLASH_MAN_FUJ:
- printf ("FUJITSU ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM800T:
- printf ("29LV800T (8 M, top sector)\n");
- break;
- case FLASH_AM800B:
- printf ("29LV800T (8 M, bottom sector)\n");
- break;
- case FLASH_AM160T:
- printf ("29LV160T (16 M, top sector)\n");
- break;
- case FLASH_AM160B:
- printf ("29LV160B (16 M, bottom sector)\n");
- break;
- case FLASH_AMDL322T:
- printf ("29DL322T (32 M, top sector)\n");
- break;
- case FLASH_AMDL322B:
- printf ("29DL322B (32 M, bottom sector)\n");
- break;
- case FLASH_AMDL323T:
- printf ("29DL323T (32 M, top sector)\n");
- break;
- case FLASH_AMDL323B:
- printf ("29DL323B (32 M, bottom sector)\n");
- break;
- case FLASH_AM640U:
- printf ("29LV640D (64 M, uniform sector)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect])
- prot++;
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
- V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00800080;
- V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
- V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
- V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00800080;
- V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
- udelay (1000);
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- V_ULONG (info->start[sect]) = 0x00300030;
- V_ULONG (info->start[sect] + 4) = 0x00300030;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- while ((V_ULONG (info->start[l_sect]) & 0x00800080) != 0x00800080 ||
- (V_ULONG (info->start[l_sect] + 4) & 0x00800080) != 0x00800080)
- {
- if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
- }
- }
-
- DONE:
- /* reset to read mode */
- flash_reset ();
-
- printf (" done\n");
- return 0;
-}
-
-static int write_dword (flash_info_t *, ulong, unsigned char *);
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong dp;
- static unsigned char bb[8];
- int i, l, rc, cc = cnt;
-
- dp = (addr & ~7); /* get lower dword aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - dp) != 0) {
- for (i = 0; i < 8; i++)
- bb[i] = (i < l || (i - l) >= cc) ? V_BYTE (dp + i) : *src++;
- if ((rc = write_dword (info, dp, bb)) != 0) {
- return (rc);
- }
- dp += 8;
- cc -= 8 - l;
- }
-
- /*
- * handle word aligned part
- */
- while (cc >= 8) {
- if ((rc = write_dword (info, dp, src)) != 0) {
- return (rc);
- }
- dp += 8;
- src += 8;
- cc -= 8;
- }
-
- if (cc <= 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- for (i = 0; i < 8; i++) {
- bb[i] = (i < cc) ? *src++ : V_BYTE (dp + i);
- }
- return (write_dword (info, dp, bb));
-}
-
-/*-----------------------------------------------------------------------
- * Write a dword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
-{
- ulong start, cl, ch;
- int flag, i;
-
- for (ch = 0, i = 0; i < 4; i++)
- ch = (ch << 8) + *pdata++; /* high word */
- for (cl = 0, i = 0; i < 4; i++)
- cl = (cl << 8) + *pdata++; /* low word */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *) dest) & ch) != ch
- || (*((vu_long *) (dest + 4)) & cl) != cl) {
- return (2);
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
- V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00A000A0;
- V_ULONG (dest) = ch;
- V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
- V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
- V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00A000A0;
- V_ULONG (dest + 4) = cl;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while (((V_ULONG (dest) & 0x00800080) != (ch & 0x00800080)) ||
- ((V_ULONG (dest + 4) & 0x00800080) != (cl & 0x00800080))) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <mpc8260.h>
-#include <common.h>
-#include "../common/fpga.h"
-
-fpga_t fpga_list[] = {
- {"FIOX", CONFIG_SYS_FIOX_BASE,
- CONFIG_SYS_PD_FIOX_INIT, CONFIG_SYS_PD_FIOX_PROG, CONFIG_SYS_PD_FIOX_DONE}
- ,
- {"FDOHM", CONFIG_SYS_FDOHM_BASE,
- CONFIG_SYS_PD_FDOHM_INIT, CONFIG_SYS_PD_FDOHM_PROG, CONFIG_SYS_PD_FDOHM_DONE}
-};
-int fpga_count = sizeof (fpga_list) / sizeof (fpga_t);
-
-
-ulong fpga_control (fpga_t * fpga, int cmd)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- switch (cmd) {
- case FPGA_INIT_IS_HIGH:
- immr->im_ioport.iop_pdird &= ~fpga->init_mask; /* input */
- return (immr->im_ioport.iop_pdatd & fpga->init_mask) ? 1 : 0;
-
- case FPGA_INIT_SET_LOW:
- immr->im_ioport.iop_pdird |= fpga->init_mask; /* output */
- immr->im_ioport.iop_pdatd &= ~fpga->init_mask;
- break;
-
- case FPGA_INIT_SET_HIGH:
- immr->im_ioport.iop_pdird |= fpga->init_mask; /* output */
- immr->im_ioport.iop_pdatd |= fpga->init_mask;
- break;
-
- case FPGA_PROG_SET_LOW:
- immr->im_ioport.iop_pdatd &= ~fpga->prog_mask;
- break;
-
- case FPGA_PROG_SET_HIGH:
- immr->im_ioport.iop_pdatd |= fpga->prog_mask;
- break;
-
- case FPGA_DONE_IS_HIGH:
- return (immr->im_ioport.iop_pdatd & fpga->done_mask) ? 1 : 0;
-
- case FPGA_READ_MODE:
- break;
-
- case FPGA_LOAD_MODE:
- break;
-
- case FPGA_GET_ID:
- if (fpga->conf_base == CONFIG_SYS_FIOX_BASE) {
- ulong ver =
- *(volatile ulong *) (fpga->conf_base + 0x10);
- return ((ver >> 10) & 0xf) + ((ver >> 2) & 0xf0);
- } else if (fpga->conf_base == CONFIG_SYS_FDOHM_BASE) {
- return (*(volatile ushort *) fpga->conf_base) & 0xff;
- } else {
- return *(volatile ulong *) fpga->conf_base;
- }
-
- case FPGA_INIT_PORTS:
- immr->im_ioport.iop_ppard &= ~fpga->init_mask; /* INIT I/O */
- immr->im_ioport.iop_psord &= ~fpga->init_mask;
- immr->im_ioport.iop_pdird &= ~fpga->init_mask;
-
- immr->im_ioport.iop_ppard &= ~fpga->prog_mask; /* PROG Output */
- immr->im_ioport.iop_psord &= ~fpga->prog_mask;
- immr->im_ioport.iop_pdird |= fpga->prog_mask;
-
- immr->im_ioport.iop_ppard &= ~fpga->done_mask; /* DONE Input */
- immr->im_ioport.iop_psord &= ~fpga->done_mask;
- immr->im_ioport.iop_pdird &= ~fpga->done_mask;
-
- break;
-
- }
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-#include <linux/compiler.h>
-
-#include "scm.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void config_scoh_cs(void);
-extern int fpga_init(void);
-
-#if 0
-#define DEBUGF(fmt,args...) printf (fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
- /* Port A configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */
- /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */
- /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */
- /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */
- /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */
- /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */
- /* PA25 */ { 0, 0, 0, 1, 0, 0 },
- /* PA24 */ { 0, 0, 0, 1, 0, 0 },
- /* PA23 */ { 0, 0, 0, 1, 0, 0 },
- /* PA22 */ { 0, 0, 0, 1, 0, 0 },
- /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */
- /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */
- /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */
- /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */
- /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */
- /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1]*/
- /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */
- /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */
- /* PA13 */ { 0, 0, 0, 1, 0, 0 },
- /* PA12 */ { 0, 0, 0, 1, 0, 0 },
- /* PA11 */ { 0, 0, 0, 1, 0, 0 },
- /* PA10 */ { 0, 0, 0, 1, 0, 0 },
- /* PA9 */ { 1, 1, 1, 1, 0, 0 }, /* TDM_A1 L1TXD0 */
- /* PA8 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1RXD0 */
- /* PA7 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1TSYNC */
- /* PA6 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1RSYNC */
- /* PA5 */ { 1, 0, 0, 0, 0, 0 }, /* FIOX_FPGA_PR */
- /* PA4 */ { 1, 0, 0, 0, 0, 0 }, /* DOHM_FPGA_PR */
- /* PA3 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK4 */
- /* PA2 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK4 */
- /* PA1 */ { 0, 0, 0, 1, 0, 0 },
- /* PA0 */ { 1, 0, 0, 0, 0, 0 } /* BUSY */
- },
-
- /* Port B configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PB31 */ { 1, 0, 0, 1, 0, 0 }, /* EQ_ALARM_MIN */
- /* PB30 */ { 1, 0, 0, 1, 0, 0 }, /* EQ_ALARM_MAJ */
- /* PB29 */ { 1, 0, 0, 1, 0, 0 }, /* COM_ALARM_MIN */
- /* PB28 */ { 1, 0, 0, 1, 0, 0 }, /* COM_ALARM_MAJ */
- /* PB27 */ { 0, 1, 0, 0, 0, 0 },
- /* PB26 */ { 0, 1, 0, 0, 0, 0 },
- /* PB25 */ { 1, 0, 0, 1, 0, 0 }, /* LED_GREEN_L */
- /* PB24 */ { 1, 0, 0, 1, 0, 0 }, /* LED_RED_L */
- /* PB23 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1TXD */
- /* PB22 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1RXD */
- /* PB21 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1TSYNC */
- /* PB20 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1RSYNC */
- /* PB19 */ { 1, 0, 0, 0, 0, 0 }, /* UID */
- /* PB18 */ { 0, 1, 0, 0, 0, 0 },
- /* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_DV */
- /* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_ER */
- /* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_ER */
- /* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_EN */
- /* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII COL */
- /* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII CRS */
- /* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[3] */
- /* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[2] */
- /* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[1] */
- /* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[0] */
- /* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[3] */
- /* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[2] */
- /* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[1] */
- /* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[0] */
- /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- },
-
- /* Port C configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PC31 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK1 */
- /* PC30 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK1 */
- /* PC29 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK3 */
- /* PC28 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK3 */
- /* PC27 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK2 */
- /* PC26 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK2 */
- /* PC25 */ { 0, 0, 0, 1, 0, 0 },
- /* PC24 */ { 0, 0, 0, 1, 0, 0 },
- /* PC23 */ { 0, 1, 0, 1, 0, 0 },
- /* PC22 */ { 0, 1, 0, 0, 0, 0 },
- /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */
- /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */
- /* PC19 */ { 0, 1, 0, 0, 0, 0 },
- /* PC18 */ { 0, 1, 0, 0, 0, 0 },
- /* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_CLK */
- /* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII TX_CLK */
- /* PC15 */ { 0, 0, 0, 1, 0, 0 },
- /* PC14 */ { 0, 1, 0, 0, 0, 0 },
- /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* RES_PHY_L */
- /* PC12 */ { 0, 0, 0, 1, 0, 0 },
- /* PC11 */ { 0, 0, 0, 1, 0, 0 },
- /* PC10 */ { 0, 0, 0, 1, 0, 0 },
- /* PC9 */ { 0, 1, 1, 0, 0, 0 }, /* TDM_A2 L1TSYNC */
- /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* FEP_RDY */
- /* PC7 */ { 0, 0, 0, 0, 0, 0 },
- /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* UC4_ALARM_L */
- /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* UC3_ALARM_L */
- /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* UC2_ALARM_L */
- /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* RES_MISC_L */
- /* PC2 */ { 0, 0, 0, 1, 0, 0 }, /* RES_OH_L */
- /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* RES_DOHM_L */
- /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* RES_FIOX_L */
- },
-
- /* Port D configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
- /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
- /* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* INIT_F */
- /* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* DONE_F */
- /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* INIT_D */
- /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* DONE_D */
- /* PD25 */ { 0, 0, 0, 1, 0, 0 },
- /* PD24 */ { 0, 0, 0, 1, 0, 0 },
- /* PD23 */ { 0, 0, 0, 1, 0, 0 },
- /* PD22 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1TXD */
- /* PD21 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1RXD */
- /* PD20 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1RSYNC */
- /* PD19 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPISEL */
- /* PD18 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPICLK */
- /* PD17 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPIMOSI */
- /* PD16 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPIMOSO */
-#if defined(CONFIG_SOFT_I2C)
- /* PD15 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SDA */
- /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SCL */
-#else
-#if defined(CONFIG_HARD_I2C)
- /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
- /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
-#else /* normal I/O port pins */
- /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */
- /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SCL */
-#endif
-#endif
- /* PD13 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1TXD */
- /* PD12 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1RXD */
- /* PD11 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1TSYNC */
- /* PD10 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1RSYNC */
- /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
- /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
- /* PD7 */ { 0, 0, 0, 1, 0, 1 },
- /* PD6 */ { 0, 0, 0, 1, 0, 1 },
- /* PD5 */ { 0, 0, 0, 1, 0, 0 }, /* PROG_F */
- /* PD4 */ { 0, 0, 0, 1, 0, 0 }, /* PROG_D */
- /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
- /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
- }
-};
-
-/* ------------------------------------------------------------------------- */
-
-/* Check Board Identity:
- */
-int checkboard (void)
-{
- char str[64];
- int i = getenv_f("serial#", str, sizeof (str));
-
- puts ("Board: ");
-
- if (!i || strncmp (str, "TQM8260", 7)) {
- puts ("### No HW ID - assuming TQM8260\n");
- return (0);
- }
-
- puts (str);
- putc ('\n');
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
- ulong orx, volatile uchar * base)
-{
- volatile uchar c = 0xff;
- volatile uint *sdmr_ptr;
- volatile uint *orx_ptr;
- ulong maxsize, size;
- int i;
-
- /* We must be able to test a location outsize the maximum legal size
- * to find out THAT we are outside; but this address still has to be
- * mapped by the controller. That means, that the initial mapping has
- * to be (at least) twice as large as the maximum expected size.
- */
- maxsize = (1 + (~orx | 0x7fff)) / 2;
-
- /* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
- * we are configuring CS1 if base != 0
- */
- sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
- orx_ptr = base ? &memctl->memc_or2 : &memctl->memc_or1;
-
- *orx_ptr = orx;
-
- /*
- * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
- *
- * "At system reset, initialization software must set up the
- * programmable parameters in the memory controller banks registers
- * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
- * system software should execute the following initialization sequence
- * for each SDRAM device.
- *
- * 1. Issue a PRECHARGE-ALL-BANKS command
- * 2. Issue eight CBR REFRESH commands
- * 3. Issue a MODE-SET command to initialize the mode register
- *
- * The initial commands are executed by setting P/LSDMR[OP] and
- * accessing the SDRAM with a single-byte transaction."
- *
- * The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
- */
-
- *sdmr_ptr = sdmr | PSDMR_OP_PREA;
- *base = c;
-
- *sdmr_ptr = sdmr | PSDMR_OP_CBRR;
- for (i = 0; i < 8; i++)
- *base = c;
-
- *sdmr_ptr = sdmr | PSDMR_OP_MRW;
- *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
-
- *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
- *base = c;
-
- size = get_ram_size((long *)base, maxsize);
-
- *orx_ptr = orx | ~(size - 1);
-
- return (size);
-}
-
-/*
- * Test Power-On-Reset.
- */
-int power_on_reset (void)
-{
- /* Test Reset Status Register */
- return gd->reset_status & RSR_CSRS ? 0 : 1;
-}
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
-
-#ifndef CONFIG_SYS_RAMBOOT
- long size8, size9;
-#endif
- long psize, lsize;
-
- psize = 16 * 1024 * 1024;
- lsize = 0;
-
- memctl->memc_psrt = CONFIG_SYS_PSRT;
- memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-#if 0 /* Just for debugging */
-#define prt_br_or(brX,orX) do { \
- ulong start = memctl->memc_ ## brX & 0xFFFF8000; \
- ulong sizem = ~memctl->memc_ ## orX | 0x00007FFF; \
- printf ("\n" \
- #brX " 0x%08x " #orX " 0x%08x " \
- "==> 0x%08lx ... 0x%08lx = %ld MB\n", \
- memctl->memc_ ## brX, memctl->memc_ ## orX, \
- start, start+sizem, (sizem+1)>>20); \
- } while (0)
- prt_br_or (br0, or0);
- prt_br_or (br1, or1);
- prt_br_or (br2, or2);
- prt_br_or (br3, or3);
-#endif
-
-#ifndef CONFIG_SYS_RAMBOOT
- /* 60x SDRAM setup:
- */
- size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
- (uchar *) CONFIG_SYS_SDRAM_BASE);
- size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL,
- (uchar *) CONFIG_SYS_SDRAM_BASE);
-
- if (size8 < size9) {
- psize = size9;
- printf ("(60x:9COL - %ld MB, ", psize >> 20);
- } else {
- psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
- (uchar *) CONFIG_SYS_SDRAM_BASE);
- printf ("(60x:8COL - %ld MB, ", psize >> 20);
- }
-
- /* Local SDRAM setup:
- */
-#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
- memctl->memc_lsrt = CONFIG_SYS_LSRT;
- size8 = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
- (uchar *) SDRAM_BASE2_PRELIM);
- size9 = try_init (memctl, CONFIG_SYS_LSDMR_9COL, CONFIG_SYS_OR2_9COL,
- (uchar *) SDRAM_BASE2_PRELIM);
-
- if (size8 < size9) {
- lsize = size9;
- printf ("Local:9COL - %ld MB) using ", lsize >> 20);
- } else {
- lsize = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
- (uchar *) SDRAM_BASE2_PRELIM);
- printf ("Local:8COL - %ld MB) using ", lsize >> 20);
- }
-
-#if 0
- /* Set up BR2 so that the local SDRAM goes
- * right after the 60x SDRAM
- */
- memctl->memc_br2 = (CONFIG_SYS_BR2_PRELIM & ~BRx_BA_MSK) |
- (CONFIG_SYS_SDRAM_BASE + psize);
-#endif
-#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
-#endif /* CONFIG_SYS_RAMBOOT */
-
- icache_enable ();
-
- config_scoh_cs ();
-
- return (psize);
-}
-
-/* ------------------------------------------------------------------------- */
-
-static void config_scoh_cs (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immr->im_memctl;
- volatile can_reg_t *can = (volatile can_reg_t *) CONFIG_SYS_CAN0_BASE;
- __maybe_unused volatile uint tmp, i;
-
- /* Initialize OR3 / BR3 for CAN Bus Controller 0 */
- memctl->memc_or3 = CONFIG_SYS_CAN0_OR3;
- memctl->memc_br3 = CONFIG_SYS_CAN0_BR3;
- /* Initialize OR4 / BR4 for CAN Bus Controller 1 */
- memctl->memc_or4 = CONFIG_SYS_CAN1_OR4;
- memctl->memc_br4 = CONFIG_SYS_CAN1_BR4;
-
- /* Initialize MAMR to write in the array at address 0x0 */
- memctl->memc_mamr = 0x00 | MxMR_OP_WARR | MxMR_GPL_x4DIS;
-
- /* Initialize UPMA for CAN: single read */
- memctl->memc_mdr = 0xcffeec00;
- udelay (1); /* Necessary to have the data correct in the UPM array!!!! */
- /* The read on the CAN controller write the data of mdr in UPMA array. */
- /* The index to the array will be incremented automatically
- through this read */
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x0ffcec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x0ffcec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x0ffcec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x0ffcec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x0ffcfc00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x0ffcfc00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0xfffdec07;
- udelay (1);
- tmp = can->cpu_interface;
-
-
- /* Initialize MAMR to write in the array at address 0x18 */
- memctl->memc_mamr = 0x18 | MxMR_OP_WARR | MxMR_GPL_x4DIS;
-
- /* Initialize UPMA for CAN: single write */
- memctl->memc_mdr = 0xfcffec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x00ffec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x00ffec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x00ffec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x00ffec00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x00fffc00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x00fffc00;
- udelay (1);
- tmp = can->cpu_interface;
-
- memctl->memc_mdr = 0x30ffec07;
- udelay (1);
- tmp = can->cpu_interface;
-
- /* Initialize MAMR */
- memctl->memc_mamr = MxMR_GPL_x4DIS; /* GPL_B4 ouput line Disable */
-
-
- /* Initialize OR5 / BR5 for the extended EEPROM Bank0 */
- memctl->memc_or5 = CONFIG_SYS_EXTPROM_OR5;
- memctl->memc_br5 = CONFIG_SYS_EXTPROM_BR5;
- /* Initialize OR6 / BR6 for the extended EEPROM Bank1 */
- memctl->memc_or6 = CONFIG_SYS_EXTPROM_OR6;
- memctl->memc_br6 = CONFIG_SYS_EXTPROM_BR6;
-
- /* Initialize OR7 / BR7 for the Glue Logic */
- memctl->memc_or7 = CONFIG_SYS_FIOX_OR7;
- memctl->memc_br7 = CONFIG_SYS_FIOX_BR7;
-
- /* Initialize OR8 / BR8 for the DOH Logic */
- memctl->memc_or8 = CONFIG_SYS_FDOHM_OR8;
- memctl->memc_br8 = CONFIG_SYS_FDOHM_BR8;
-
- DEBUGF ("OR0 %08x BR0 %08x\n", memctl->memc_or0, memctl->memc_br0);
- DEBUGF ("OR1 %08x BR1 %08x\n", memctl->memc_or1, memctl->memc_br1);
- DEBUGF ("OR2 %08x BR2 %08x\n", memctl->memc_or2, memctl->memc_br2);
- DEBUGF ("OR3 %08x BR3 %08x\n", memctl->memc_or3, memctl->memc_br3);
- DEBUGF ("OR4 %08x BR4 %08x\n", memctl->memc_or4, memctl->memc_br4);
- DEBUGF ("OR5 %08x BR5 %08x\n", memctl->memc_or5, memctl->memc_br5);
- DEBUGF ("OR6 %08x BR6 %08x\n", memctl->memc_or6, memctl->memc_br6);
- DEBUGF ("OR7 %08x BR7 %08x\n", memctl->memc_or7, memctl->memc_br7);
- DEBUGF ("OR8 %08x BR8 %08x\n", memctl->memc_or8, memctl->memc_br8);
-
- DEBUGF ("UPMA addr 0x0\n");
- memctl->memc_mamr = 0x00 | MxMR_OP_RARR | MxMR_GPL_x4DIS;
- for (i = 0; i < 0x8; i++) {
- tmp = can->cpu_interface;
- udelay (1);
- DEBUGF (" %08x ", memctl->memc_mdr);
- }
- DEBUGF ("\nUPMA addr 0x18\n");
- memctl->memc_mamr = 0x18 | MxMR_OP_RARR | MxMR_GPL_x4DIS;
- for (i = 0; i < 0x8; i++) {
- tmp = can->cpu_interface;
- udelay (1);
- DEBUGF (" %08x ", memctl->memc_mdr);
- }
- DEBUGF ("\n");
- memctl->memc_mamr = MxMR_GPL_x4DIS;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_r (void)
-{
- fpga_init ();
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __SCM_H
-#define __SCM_H
-
-/*----------------*/
-/* CAN Structures */
-/*----------------*/
-
-/* Message */
-struct can_msg {
- uchar ctrl_0;
- uchar ctrl_1;
- uchar arbit_0;
- uchar arbit_1;
- uchar arbit_2;
- uchar arbit_3;
- uchar config;
- uchar data[8];
-} __attribute__ ((packed));
-
-typedef struct can_msg can_msg_t;
-
-/* CAN Register */
-typedef struct can_reg {
- uchar ctrl;
- uchar status;
- uchar cpu_interface;
- uchar resv0;
- ushort high_speed_rd;
- ushort gbl_mask_std;
- uint gbl_mask_extd;
- uint msg15_mask;
- can_msg_t msg1;
- uchar clkout;
- can_msg_t msg2;
- uchar bus_config;
- can_msg_t msg3;
- uchar bit_timing_0;
- can_msg_t msg4;
- uchar bit_timing_1;
- can_msg_t msg5;
- uchar interrupt;
- can_msg_t msg6;
- uchar resv1;
- can_msg_t msg7;
- uchar resv2;
- can_msg_t msg8;
- uchar resv3;
- can_msg_t msg9;
- uchar p1conf;
- can_msg_t msg10;
- uchar p2conf;
- can_msg_t msg11;
- uchar p1in;
- can_msg_t msg12;
- uchar p2in;
- can_msg_t msg13;
- uchar p1out;
- can_msg_t msg14;
- uchar p2out;
- can_msg_t msg15;
- uchar ser_res_addr;
- uchar resv_cs[0x8000-0x100]; /* 0x8000 is the min size for CS */
-} can_reg_t;
-
-
-#endif /* __SCM_H */
+++ /dev/null
-CCM/SCM-Ergaenzungen fuer U-Boot und Linux:
--------------------------------------------
-
-Es gibt nun ein gemeinsames Kommando zum Laden der FPGAs:
-
- => help fpga
- fpga fpga status [name] - print FPGA status
- fpga reset [name] - reset FPGA
- fpga load [name] addr - load FPGA configuration data
-
-Der Name kann beim CCM-Module auch weggelassen werden.
-Die Laengenangabe und damit "puma_len" ist nicht mehr
-noetig:
-
- => fpga load puma 40600000
- FPGA load PUMA: addr 40600000: (00000005)... done
-
-Die MTD-Partitionierung kann nun mittels "bootargs" ueber-
-geben werden:
-
- => printenv addmtd
- addmtd=setenv bootargs ${bootargs}
- mtdparts=0:256k(U-Boot)ro,768k(Kernel),-(Rest)\;1:-(myJFFS2)
-
-Die Portierung auf SMC ist natuerlich noch nicht getestet.
-
-Wolfgang Grandegger (04.06.2002)
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-#include <common.h>
-
-#include "fpga.h"
-
-int power_on_reset(void);
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-
-static int fpga_get_version(fpga_t* fpga, char* name)
-{
- char vname[12];
- /*
- * Net-list string format:
- * "vvvvvvvvddddddddn...".
- * Version Date Name
- * "0000000322042002PUMA" = PUMA version 3 from 22.04.2002.
- */
- if (strlen(name) < (16 + strlen(fpga->name)))
- goto failure;
- /* Check FPGA name */
- if (strcmp(&name[16], fpga->name) != 0)
- goto failure;
- /* Get version number */
- memcpy(vname, name, 8);
- vname[8] = '\0';
- return simple_strtoul(vname, NULL, 16);
-
- failure:
- printf("Image name %s is invalid\n", name);
- return -1;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-static fpga_t* fpga_get(char* fpga_name)
-{
- char name[FPGA_NAME_LEN];
- int i;
-
- if (strlen(fpga_name) >= FPGA_NAME_LEN)
- goto failure;
- for (i = 0; i < strlen(fpga_name); i++)
- name[i] = toupper(fpga_name[i]);
- name[i] = '\0';
- for (i = 0; i < fpga_count; i++) {
- if (strcmp(name, fpga_list[i].name) == 0)
- return &fpga_list[i];
- }
- failure:
- printf("FPGA: name %s is invalid\n", fpga_name);
- return NULL;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-static void fpga_status (fpga_t* fpga)
-{
- /* Check state */
- if (fpga_control(fpga, FPGA_DONE_IS_HIGH))
- printf ("%s is loaded (%08lx)\n",
- fpga->name, fpga_control(fpga, FPGA_GET_ID));
- else
- printf ("%s is NOT loaded\n", fpga->name);
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-#define FPGA_RESET_TIMEOUT 100 /* = 10 ms */
-
-static int fpga_reset (fpga_t* fpga)
-{
- int i;
-
- /* Set PROG to low and wait til INIT goes low */
- fpga_control(fpga, FPGA_PROG_SET_LOW);
- for (i = 0; i < FPGA_RESET_TIMEOUT; i++) {
- udelay (100);
- if (!fpga_control(fpga, FPGA_INIT_IS_HIGH))
- break;
- }
- if (i == FPGA_RESET_TIMEOUT)
- goto failure;
-
- /* Set PROG to high and wait til INIT goes high */
- fpga_control(fpga, FPGA_PROG_SET_HIGH);
- for (i = 0; i < FPGA_RESET_TIMEOUT; i++) {
- udelay (100);
- if (fpga_control(fpga, FPGA_INIT_IS_HIGH))
- break;
- }
- if (i == FPGA_RESET_TIMEOUT)
- goto failure;
-
- return 0;
- failure:
- return 1;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-#define FPGA_LOAD_TIMEOUT 100 /* = 10 ms */
-
-static int fpga_load (fpga_t* fpga, ulong addr, int checkall)
-{
- volatile uchar *fpga_addr = (volatile uchar *)fpga->conf_base;
- image_header_t *hdr = (image_header_t *)addr;
- ulong len;
- uchar *data;
- char msg[32];
- int verify, i;
-
-#if defined(CONFIG_FIT)
- if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
- puts ("Non legacy image format not supported\n");
- return -1;
- }
-#endif
-
- /*
- * Check the image header and data of the net-list
- */
- if (!image_check_magic (hdr)) {
- strcpy (msg, "Bad Image Magic Number");
- goto failure;
- }
-
- if (!image_check_hcrc (hdr)) {
- strcpy (msg, "Bad Image Header CRC");
- goto failure;
- }
-
- data = (uchar*)image_get_data (hdr);
- len = image_get_data_size (hdr);
-
- verify = getenv_yesno ("verify");
- if (verify) {
- if (!image_check_dcrc (hdr)) {
- strcpy (msg, "Bad Image Data CRC");
- goto failure;
- }
- }
-
- if (checkall && fpga_get_version(fpga, image_get_name (hdr)) < 0)
- return 1;
-
- /* align length */
- if (len & 1)
- ++len;
-
- /*
- * Reset FPGA and wait for completion
- */
- if (fpga_reset(fpga)) {
- strcpy (msg, "Reset Timeout");
- goto failure;
- }
-
- printf ("(%s)... ", image_get_name (hdr));
- /*
- * Copy data to FPGA
- */
- fpga_control (fpga, FPGA_LOAD_MODE);
- while (len--) {
- *fpga_addr = *data++;
- }
- fpga_control (fpga, FPGA_READ_MODE);
-
- /*
- * Wait for completion and check error status if timeout
- */
- for (i = 0; i < FPGA_LOAD_TIMEOUT; i++) {
- udelay (100);
- if (fpga_control (fpga, FPGA_DONE_IS_HIGH))
- break;
- }
- if (i == FPGA_LOAD_TIMEOUT) {
- if (fpga_control(fpga, FPGA_INIT_IS_HIGH))
- strcpy(msg, "Invalid Size");
- else
- strcpy(msg, "CRC Error");
- goto failure;
- }
-
- printf("done\n");
- return 0;
-
- failure:
-
- printf("ERROR: %s\n", msg);
- return 1;
-}
-
-#if defined(CONFIG_CMD_BSP)
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- ulong addr = 0;
- int i;
- fpga_t* fpga;
-
- if (argc < 2)
- goto failure;
-
- if (strncmp(argv[1], "stat", 4) == 0) { /* status */
- if (argc == 2) {
- for (i = 0; i < fpga_count; i++) {
- fpga_status (&fpga_list[i]);
- }
- }
- else if (argc == 3) {
- if ((fpga = fpga_get(argv[2])) == 0)
- goto failure;
- fpga_status (fpga);
- }
- else
- goto failure;
- }
- else if (strcmp(argv[1],"load") == 0) { /* load */
- if (argc == 3 && fpga_count == 1) {
- fpga = &fpga_list[0];
- }
- else if (argc == 4) {
- if ((fpga = fpga_get(argv[2])) == 0)
- goto failure;
- }
- else
- goto failure;
-
- addr = simple_strtoul(argv[argc-1], NULL, 16);
-
- printf ("FPGA load %s: addr %08lx: ",
- fpga->name, addr);
- fpga_load (fpga, addr, 1);
-
- }
- else if (strncmp(argv[1], "rese", 4) == 0) { /* reset */
- if (argc == 2 && fpga_count == 1) {
- fpga = &fpga_list[0];
- }
- else if (argc == 3) {
- if ((fpga = fpga_get(argv[2])) == 0)
- goto failure;
- }
- else
- goto failure;
-
- printf ("FPGA reset %s: ", fpga->name);
- if (fpga_reset(fpga))
- printf ("ERROR: Timeout\n");
- else
- printf ("done\n");
- }
- else
- goto failure;
-
- return 0;
-
- failure:
- return cmd_usage(cmdtp);
-}
-
-U_BOOT_CMD(
- fpga, 4, 1, do_fpga,
- "access FPGA(s)",
- "fpga status [name] - print FPGA status\n"
- "fpga reset [name] - reset FPGA\n"
- "fpga load [name] addr - load FPGA configuration data"
-);
-
-#endif
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-int fpga_init (void)
-{
- ulong addr;
- ulong new_id, old_id = 0;
- image_header_t *hdr;
- fpga_t* fpga;
- int do_load, i, j;
- char name[16], *s;
-
- /*
- * Port setup for FPGA control
- */
- for (i = 0; i < fpga_count; i++) {
- fpga_control(&fpga_list[i], FPGA_INIT_PORTS);
- }
-
- /*
- * Load FPGA(s): a new net-list is loaded if the FPGA is
- * empty, Power-on-Reset or the old one is not up-to-date
- */
- for (i = 0; i < fpga_count; i++) {
- fpga = &fpga_list[i];
- printf ("%s: ", fpga->name);
-
- for (j = 0; j < strlen(fpga->name); j++)
- name[j] = tolower(fpga->name[j]);
- name[j] = '\0';
- sprintf(name, "%s_addr", name);
- addr = 0;
- if ((s = getenv(name)) != NULL)
- addr = simple_strtoul(s, NULL, 16);
-
- if (!addr) {
- printf ("env. variable %s undefined\n", name);
- return 1;
- }
-
- hdr = (image_header_t *)addr;
-#if defined(CONFIG_FIT)
- if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
- puts ("Non legacy image format not supported\n");
- return -1;
- }
-#endif
-
- if ((new_id = fpga_get_version(fpga, image_get_name (hdr))) == -1)
- return 1;
-
- do_load = 1;
-
- if (!power_on_reset() && fpga_control(fpga, FPGA_DONE_IS_HIGH)) {
- old_id = fpga_control(fpga, FPGA_GET_ID);
- if (new_id == old_id)
- do_load = 0;
- }
-
- if (do_load) {
- printf ("loading ");
- fpga_load (fpga, addr, 0);
- } else {
- printf ("loaded (%08lx)\n", old_id);
- }
- }
-
- return 0;
-}
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
+++ /dev/null
-#
-# (C) Copyright 2004-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := sx1.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-#
-# (C) Copyright 2004
-# Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
-#
-# SX1 board with OMAP1510 (ARM925T) cpu
-# see http://www.ti.com/ for more information on Texas Insturments
-#
-# SX1 has 1 bank of 256 MB SDRAM
-# Physical Address:
-# 1000'0000 to 2000'0000
-#
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 (mem base + reserved)
-#
-# we load ourself to 1108'0000
-#
-#
-
-CONFIG_SYS_TEXT_BASE = 0x11080000
+++ /dev/null
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- *
- * -- Some bits of code used from rrload's head_OMAP1510.s --
- * Copyright (C) 2002 RidgeRun, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#if defined(CONFIG_OMAP1510)
-#include <./configs/omap1510.h>
-#endif
-
-#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK))
-
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
-
-.globl lowlevel_init
-lowlevel_init:
-
- /*
- * Configure 1510 pins functions to match our board.
- */
- ldr r0, REG_PULL_DWN_CTRL_0
- ldr r1, VAL_PULL_DWN_CTRL_0
- str r1, [r0]
- ldr r0, REG_PULL_DWN_CTRL_1
- ldr r1, VAL_PULL_DWN_CTRL_1
- str r1, [r0]
- ldr r0, REG_PULL_DWN_CTRL_2
- ldr r1, VAL_PULL_DWN_CTRL_2
- str r1, [r0]
- ldr r0, REG_PULL_DWN_CTRL_3
- ldr r1, VAL_PULL_DWN_CTRL_3
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_4
- ldr r1, VAL_FUNC_MUX_CTRL_4
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_5
- ldr r1, VAL_FUNC_MUX_CTRL_5
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_6
- ldr r1, VAL_FUNC_MUX_CTRL_6
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_7
- ldr r1, VAL_FUNC_MUX_CTRL_7
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_8
- ldr r1, VAL_FUNC_MUX_CTRL_8
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_9
- ldr r1, VAL_FUNC_MUX_CTRL_9
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_A
- ldr r1, VAL_FUNC_MUX_CTRL_A
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_B
- ldr r1, VAL_FUNC_MUX_CTRL_B
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_C
- ldr r1, VAL_FUNC_MUX_CTRL_C
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_D
- ldr r1, VAL_FUNC_MUX_CTRL_D
- str r1, [r0]
- ldr r0, REG_VOLTAGE_CTRL_0
- ldr r1, VAL_VOLTAGE_CTRL_0
- str r1, [r0]
- ldr r0, REG_TEST_DBG_CTRL_0
- ldr r1, VAL_TEST_DBG_CTRL_0
- str r1, [r0]
- ldr r0, REG_MOD_CONF_CTRL_0
- ldr r1, VAL_MOD_CONF_CTRL_0
- str r1, [r0]
-
- /* Move to 1510 mode */
- ldr r0, REG_COMP_MODE_CTRL_0
- ldr r1, VAL_COMP_MODE_CTRL_0
- str r1, [r0]
-
- /* Set up Traffic Ctlr*/
- ldr r0, REG_TC_IMIF_PRIO
- mov r1, #0x0
- str r1, [r0]
- ldr r0, REG_TC_EMIFS_PRIO
- str r1, [r0]
- ldr r0, REG_TC_EMIFF_PRIO
- str r1, [r0]
-
- ldr r0, REG_TC_EMIFS_CONFIG
- ldr r1, [r0]
- bic r1, r1, #0x08 /* clear the global power-down enable PDE bit */
- bic r1, r1, #0x01 /* write protect flash by clearing the WP bit */
- str r1, [r0] /* EMIFS GlB Configuration. (value 0x12 most likely) */
-
- ldr r0, _GPIO_PIN_CONTROL_REG
- mov r1,#0
- orr r1, r1, #0x0001 /* M_PCM_SYNC */
- orr r1, r1, #0x4000 /* IPC_ACTIVE */
- strh r1,[r0]
-
- ldr r0, _GPIO_DIR_CONTROL_REG
- mov r1,#0
- bic r1, r1, #0x0001 /* M_PCM_SYNC */
- bic r1, r1, #0x4000 /* IPC_ACTIVE */
- strh r1,[r0]
-
- ldr r0, _GPIO_DATA_OUTPUT_REG
- mov r1,#0
- bic r1, r1, #0x0001 /* M_PCM_SYNC */
- orr r1, r1, #0x4000 /* IPC_ACTIVE */
- strh r1,[r0]
-
- /* Setup some clock domains */
- ldr r1, =OMAP1510_CLKS
- ldr r0, REG_ARM_IDLECT2
- strh r1, [r0] /* CLKM, Clock domain control. */
-
- mov r1, #0x01 /* PER_EN bit */
- ldr r0, REG_ARM_RSTCT2
- strh r1, [r0] /* CLKM; Peripheral reset. */
-
- /* Set CLKM to Sync-Scalable */
- /* I supposidly need to enable the dsp clock before switching */
- mov r1, #0x1000
- ldr r0, REG_ARM_SYSST
- strh r1, [r0]
- mov r0, #0x400
-1:
- subs r0, r0, #0x1 /* wait for any bubbles to finish */
- bne 1b
-
- ldr r1, VAL_ARM_CKCTL /* use 12Mhz ref, PER must be <= 50Mhz so /2 */
- ldr r0, REG_ARM_CKCTL
- strh r1, [r0]
-
- /* setup DPLL 1 */
- ldr r1, VAL_DPLL1_CTL
- ldr r0, REG_DPLL1_CTL
- strh r1, [r0]
- ands r1, r1, #0x10 /* Check if PLL is enabled. */
- beq lock_end /* Do not look for lock if BYPASS selected */
-2:
- ldrh r1, [r0]
- ands r1, r1, #0x01 /* Check the LOCK bit. */
- beq 2b /* ...loop until bit goes hi. */
-lock_end:
-
- /* Set memory timings corresponding to the new clock speed */
-
- /* Check execution location to determine current execution location
- * and branch to appropriate initialization code.
- */
- mov r0, #0x10000000 /* Load physical SDRAM base. */
- mov r1, pc /* Get current execution location. */
- cmp r1, r0 /* Compare. */
- bge skip_sdram /* Skip over EMIF-fast initialization if running from SDRAM. */
-
- /*
- * Delay for SDRAM initialization.
- */
- mov r3, #0x1800 /* value should be checked */
-3:
- subs r3, r3, #0x1 /* Decrement count */
- bne 3b
-
- /*
- * Set SDRAM control values. Disable refresh before MRS command.
- */
- ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG /* get good value */
- bic r3, r0, #0xC /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */
- orr r3, r3, #0x8000000 /* (BIT27) Disable CLK when Power down or Self-Refresh */
- orr r3, r3, #0x4000000 /* BIT26 Power Down Enable */
- ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */
- str r3, [r2] /* Store the passed value with AR disabled. */
-
- ldr r1, VAL_TC_EMIFF_MRS /* get MRS value */
- ldr r2, REG_TC_EMIFF_MRS /* Point to MRS register. */
- str r1, [r2] /* Store the passed value.*/
-
- ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */
- str r0, [r2] /* Store the passed value. */
-
- /*
- * Delay for SDRAM initialization.
- */
- mov r3, #0x1800
-4:
- subs r3, r3, #1 /* Decrement count. */
- bne 4b
-
-skip_sdram:
-
- /* slow interface */
- ldr r1, VAL_TC_EMIFS_CS0_CONFIG
- ldr r0, REG_TC_EMIFS_CS0_CONFIG
- str r1, [r0] /* Chip Select 0 */
- ldr r1, VAL_TC_EMIFS_CS1_CONFIG
- ldr r0, REG_TC_EMIFS_CS1_CONFIG
- str r1, [r0] /* Chip Select 1 */
- ldr r1, VAL_TC_EMIFS_CS2_CONFIG
- ldr r0, REG_TC_EMIFS_CS2_CONFIG
- str r1, [r0] /* Chip Select 2 */
- ldr r1, VAL_TC_EMIFS_CS3_CONFIG
- ldr r0, REG_TC_EMIFS_CS3_CONFIG
- str r1, [r0] /* Chip Select 3 */
-
- /* back to arch calling code */
- mov pc, lr
-
-/* the literal pools origin */
- .ltorg
-
-/* OMAP configuration registers */
-REG_FUNC_MUX_CTRL_0: /* 32 bits */
- .word 0xfffe1000
-REG_FUNC_MUX_CTRL_1: /* 32 bits */
- .word 0xfffe1004
-REG_FUNC_MUX_CTRL_2: /* 32 bits */
- .word 0xfffe1008
-REG_COMP_MODE_CTRL_0: /* 32 bits */
- .word 0xfffe100c
-REG_FUNC_MUX_CTRL_3: /* 32 bits */
- .word 0xfffe1010
-REG_FUNC_MUX_CTRL_4: /* 32 bits */
- .word 0xfffe1014
-REG_FUNC_MUX_CTRL_5: /* 32 bits */
- .word 0xfffe1018
-REG_FUNC_MUX_CTRL_6: /* 32 bits */
- .word 0xfffe101c
-REG_FUNC_MUX_CTRL_7: /* 32 bits */
- .word 0xfffe1020
-REG_FUNC_MUX_CTRL_8: /* 32 bits */
- .word 0xfffe1024
-REG_FUNC_MUX_CTRL_9: /* 32 bits */
- .word 0xfffe1028
-REG_FUNC_MUX_CTRL_A: /* 32 bits */
- .word 0xfffe102C
-REG_FUNC_MUX_CTRL_B: /* 32 bits */
- .word 0xfffe1030
-REG_FUNC_MUX_CTRL_C: /* 32 bits */
- .word 0xfffe1034
-REG_FUNC_MUX_CTRL_D: /* 32 bits */
- .word 0xfffe1038
-REG_PULL_DWN_CTRL_0: /* 32 bits */
- .word 0xfffe1040
-REG_PULL_DWN_CTRL_1: /* 32 bits */
- .word 0xfffe1044
-REG_PULL_DWN_CTRL_2: /* 32 bits */
- .word 0xfffe1048
-REG_PULL_DWN_CTRL_3: /* 32 bits */
- .word 0xfffe104c
-REG_VOLTAGE_CTRL_0: /* 32 bits */
- .word 0xfffe1060
-REG_TEST_DBG_CTRL_0: /* 32 bits */
- .word 0xfffe1070
-REG_MOD_CONF_CTRL_0: /* 32 bits */
- .word 0xfffe1080
-REG_TC_IMIF_PRIO: /* 32 bits */
- .word 0xfffecc00
-REG_TC_EMIFS_PRIO: /* 32 bits */
- .word 0xfffecc04
-REG_TC_EMIFF_PRIO: /* 32 bits */
- .word 0xfffecc08
-REG_TC_EMIFS_CONFIG: /* 32 bits */
- .word 0xfffecc0c
-REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */
- .word 0xfffecc10
-REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */
- .word 0xfffecc14
-REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */
- .word 0xfffecc18
-REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */
- .word 0xfffecc1c
-REG_TC_EMIFF_SDRAM_CONFIG: /* 32 bits */
- .word 0xfffecc20
-REG_TC_EMIFF_MRS: /* 32 bits */
- .word 0xfffecc24
-/* MPU clock/reset/power mode control registers */
-REG_ARM_CKCTL: /* 16 bits */
- .word 0xfffece00
-REG_ARM_IDLECT2: /* 16 bits */
- .word 0xfffece08
-REG_ARM_RSTCT2: /* 16 bits */
- .word 0xfffece14
-REG_ARM_SYSST: /* 16 bits */
- .word 0xfffece18
-/* DPLL control registers */
-REG_DPLL1_CTL: /* 16 bits */
- .word 0xfffecf00
-/* identification code register */
-REG_IDCODE: /* 32 bits */
- .word 0xfffed404
-
-/* SX1 specific */
-_GPIO_PIN_CONTROL_REG:
- .word GPIO_PIN_CONTROL_REG
-_GPIO_DIR_CONTROL_REG:
- .word GPIO_DIR_CONTROL_REG
-_GPIO_DATA_OUTPUT_REG:
- .word GPIO_DATA_OUTPUT_REG
-
-VAL_COMP_MODE_CTRL_0:
- .word 0x0000eaef
-VAL_FUNC_MUX_CTRL_4:
- .word 0x00000000
-VAL_FUNC_MUX_CTRL_5:
- .word 0x00000000
-VAL_FUNC_MUX_CTRL_6:
- .word 0x00000001
-VAL_FUNC_MUX_CTRL_7:
- .word 0x00001000
-VAL_FUNC_MUX_CTRL_8:
- .word 0x00001240 /*[Knoller] Value of Symbian Image Wing B2*/
-VAL_FUNC_MUX_CTRL_9:
- .word 0x00201008
-VAL_FUNC_MUX_CTRL_A:
- .word 0x00001000
-VAL_FUNC_MUX_CTRL_B:
- .word 0x00000000
-VAL_FUNC_MUX_CTRL_C:
- .word 0x09008001 /*[Knoller] Value of Symbian Image Wing B2*/
-VAL_FUNC_MUX_CTRL_D:
- .word 0x00000000
-VAL_PULL_DWN_CTRL_0:
- .word 0xfffeffff
-VAL_PULL_DWN_CTRL_1:
- .word 0xd1ffffec
-VAL_PULL_DWN_CTRL_2:
- .word 0xffa80c5b
-VAL_PULL_DWN_CTRL_3:
- .word 0xffffc0fe
-VAL_VOLTAGE_CTRL_0:
- .word 0x00000007
-VAL_TEST_DBG_CTRL_0:
- /* The OMAP5910 TRM says this register must be 0, but HelenConfRegs
- * says to write a 7. Don't know what the right thing is to do, so
- * I'm leaving it at 7 since that's what was already here.
- */
- .word 0x00000007
-VAL_MOD_CONF_CTRL_0:
- .word 0x0da20000 /*[Knoller] Value of Symbian Image Wing B2*/
-
-VAL_ARM_CKCTL:
- .word 0x010D
-
-VAL_DPLL1_CTL:
- .word 0x3A33 /*[Hertle] Value of Symbian Image*/
-
-VAL_TC_EMIFS_CS1_CONFIG_PRELIM:
- .word 0x00001149
-
-VAL_TC_EMIFS_CS2_CONFIG_PRELIM:
- .word 0x00004158
-
-VAL_TC_EMIFS_CS0_CONFIG:
- .word 0x00213090 /*[Knoller] Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFS_CS1_CONFIG:
- .word 0x00215070 /*[Knoller] Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFS_CS2_CONFIG:
- .word 0x00001139 /*[Knoller] Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFS_CS3_CONFIG:
- .word 0x00001139 /*[Knoller] Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFF_SDRAM_CONFIG:
- .word 0x0105f0b4 /*[Knoller] Value of Symbian Image Wing B2*/
-
-
-VAL_TC_EMIFF_MRS:
- .word 0x00000027 /*[Knoller] Value of Symbian Image Wing B2*/
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void flash__init (void);
-static void ether__init (void);
-
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* arch number of SX1 Board */
- gd->bd->bi_arch_number = MACH_TYPE_SX1;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x10000100;
-
-/* kk - this speeds up your boot a quite a bit. However to make it
- * work, you need make sure your kernel startup flush bug is fixed.
- * ... rkw ...
- */
- icache_enable ();
-
- flash__init ();
- ether__init ();
- return 0;
-}
-
-
-int misc_init_r (void)
-{
- /* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */
- /* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */
-
- /* setup gpio direction to match board (no floats!) */
- /**gdir = 0xCFF9; */
- /**mdir = 0x103F; */
-
- return (0);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-static void flash__init (void)
-{
-#define CS0_CHIP_SELECT_REG 0xfffecc10
-#define CS3_CHIP_SELECT_REG 0xfffecc1c
-#define EMIFS_GlB_Config_REG 0xfffecc0c
-
- unsigned int regval;
-
- regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
- regval = regval | 0x0001; /* Turn off write protection for flash devices. */
- if (regval & 0x0002) {
- regval = regval & 0xfffd; /* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */
- /* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */
- /* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */
- /* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */
- }
- *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
-}
-
-
-/******************************
- Routine:
- Description:
-******************************/
-static void ether__init (void)
-{
-#define ETH_CONTROL_REG 0x0800000b
- /* take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete.
- */
- *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
- udelay (3);
-}
-
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
#define BUZZER 140
#define SPEAKER 141
+#define USB1_PWR 127
+#define USB2_PWR 149
#ifndef CONFIG_FPGA
#error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
gpio_direction_output(BUZZER, 0);
gpio_direction_output(SPEAKER, 0);
+ /* Activate USB power */
+ gpio_request(USB1_PWR, "USB1_PWR");
+ gpio_request(USB2_PWR, "USB2_PWR");
+ gpio_direction_output(USB1_PWR, 1);
+ gpio_direction_output(USB2_PWR, 1);
+
return 0;
}
COBJS := mux.o
endif
+COBJS += board.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
--- /dev/null
+/*
+ * board.c
+ *
+ * Board functions for TI AM335X based boards
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+#ifdef CONFIG_SPL_BUILD
+static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
+#endif
+
+/* MII mode defines */
+#define MII_MODE_ENABLE 0x0
+#define RGMII_MODE_ENABLE 0xA
+
+/* GPIO that controls power to DDR on EVM-SK */
+#define GPIO_DDR_VTT_EN 7
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+static struct am335x_baseboard_id __attribute__((section (".data"))) header;
+
+static inline int board_is_bone(void)
+{
+ return !strncmp(header.name, "A335BONE", HDR_NAME_LEN);
+}
+
+static inline int board_is_bone_lt(void)
+{
+ return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN);
+}
+
+static inline int board_is_evm_sk(void)
+{
+ return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
+}
+
+static inline int board_is_idk(void)
+{
+ return !strncmp(header.config, "SKU#02", 6);
+}
+
+/*
+ * Read header information from EEPROM into global structure.
+ */
+static int read_eeprom(void)
+{
+ /* Check if baseboard eeprom is available */
+ if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
+ puts("Could not probe the EEPROM; something fundamentally "
+ "wrong on the I2C bus.\n");
+ return -ENODEV;
+ }
+
+ /* read the eeprom using i2c */
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header,
+ sizeof(header))) {
+ puts("Could not read the EEPROM; something fundamentally"
+ " wrong on the I2C bus.\n");
+ return -EIO;
+ }
+
+ if (header.magic != 0xEE3355AA) {
+ /*
+ * read the eeprom using i2c again,
+ * but use only a 1 byte address
+ */
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1,
+ (uchar *)&header, sizeof(header))) {
+ puts("Could not read the EEPROM; something "
+ "fundamentally wrong on the I2C bus.\n");
+ return -EIO;
+ }
+
+ if (header.magic != 0xEE3355AA) {
+ printf("Incorrect magic number (0x%x) in EEPROM\n",
+ header.magic);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+/* UART Defines */
+#ifdef CONFIG_SPL_BUILD
+#define UART_RESET (0x1 << 1)
+#define UART_CLK_RUNNING_MASK 0x1
+#define UART_SMART_IDLE_EN (0x1 << 0x3)
+
+static void rtc32k_enable(void)
+{
+ struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE;
+
+ /*
+ * Unlock the RTC's registers. For more details please see the
+ * RTC_SS section of the TRM. In order to unlock we need to
+ * write these specific values (keys) in this order.
+ */
+ writel(0x83e70b13, &rtc->kick0r);
+ writel(0x95a4f1e0, &rtc->kick1r);
+
+ /* Enable the RTC 32K OSC by setting bits 3 and 6. */
+ writel((1 << 3) | (1 << 6), &rtc->osc);
+}
+
+static const struct ddr_data ddr2_data = {
+ .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
+ (MT47H128M16RT25E_RD_DQS<<20) |
+ (MT47H128M16RT25E_RD_DQS<<10) |
+ (MT47H128M16RT25E_RD_DQS<<0)),
+ .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) |
+ (MT47H128M16RT25E_WR_DQS<<20) |
+ (MT47H128M16RT25E_WR_DQS<<10) |
+ (MT47H128M16RT25E_WR_DQS<<0)),
+ .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) |
+ (MT47H128M16RT25E_PHY_WRLVL<<20) |
+ (MT47H128M16RT25E_PHY_WRLVL<<10) |
+ (MT47H128M16RT25E_PHY_WRLVL<<0)),
+ .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) |
+ (MT47H128M16RT25E_PHY_GATELVL<<20) |
+ (MT47H128M16RT25E_PHY_GATELVL<<10) |
+ (MT47H128M16RT25E_PHY_GATELVL<<0)),
+ .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) |
+ (MT47H128M16RT25E_PHY_FIFO_WE<<20) |
+ (MT47H128M16RT25E_PHY_FIFO_WE<<10) |
+ (MT47H128M16RT25E_PHY_FIFO_WE<<0)),
+ .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) |
+ (MT47H128M16RT25E_PHY_WR_DATA<<20) |
+ (MT47H128M16RT25E_PHY_WR_DATA<<10) |
+ (MT47H128M16RT25E_PHY_WR_DATA<<0)),
+ .datauserank0delay = MT47H128M16RT25E_PHY_RANK0_DELAY,
+ .datadldiff0 = PHY_DLL_LOCK_DIFF,
+};
+
+static const struct cmd_control ddr2_cmd_ctrl_data = {
+ .cmd0csratio = MT47H128M16RT25E_RATIO,
+ .cmd0dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
+ .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+
+ .cmd1csratio = MT47H128M16RT25E_RATIO,
+ .cmd1dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
+ .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+
+ .cmd2csratio = MT47H128M16RT25E_RATIO,
+ .cmd2dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
+ .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+};
+
+static const struct emif_regs ddr2_emif_reg_data = {
+ .sdram_config = MT47H128M16RT25E_EMIF_SDCFG,
+ .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF,
+ .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1,
+ .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2,
+ .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3,
+ .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY,
+};
+
+static const struct ddr_data ddr3_data = {
+ .datardsratio0 = MT41J128MJT125_RD_DQS,
+ .datawdsratio0 = MT41J128MJT125_WR_DQS,
+ .datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE,
+ .datawrsratio0 = MT41J128MJT125_PHY_WR_DATA,
+ .datadldiff0 = PHY_DLL_LOCK_DIFF,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+ .cmd0csratio = MT41J128MJT125_RATIO,
+ .cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
+ .cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT,
+
+ .cmd1csratio = MT41J128MJT125_RATIO,
+ .cmd1dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
+ .cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT,
+
+ .cmd2csratio = MT41J128MJT125_RATIO,
+ .cmd2dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
+ .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+ .sdram_config = MT41J128MJT125_EMIF_SDCFG,
+ .ref_ctrl = MT41J128MJT125_EMIF_SDREF,
+ .sdram_tim1 = MT41J128MJT125_EMIF_TIM1,
+ .sdram_tim2 = MT41J128MJT125_EMIF_TIM2,
+ .sdram_tim3 = MT41J128MJT125_EMIF_TIM3,
+ .zq_config = MT41J128MJT125_ZQ_CFG,
+ .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY,
+};
+#endif
+
+/*
+ * early system init of muxing and clocks.
+ */
+void s_init(void)
+{
+ /* WDT1 is already running when the bootloader gets control
+ * Disable it to avoid "random" resets
+ */
+ writel(0xAAAA, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+ writel(0x5555, &wdtimer->wdtwspr);
+ while (readl(&wdtimer->wdtwwps) != 0x0)
+ ;
+
+#ifdef CONFIG_SPL_BUILD
+ /* Setup the PLLs and the clocks for the peripherals */
+ pll_init();
+
+ /* Enable RTC32K clock */
+ rtc32k_enable();
+
+ /* UART softreset */
+ u32 regVal;
+
+#ifdef CONFIG_SERIAL1
+ enable_uart0_pin_mux();
+#endif /* CONFIG_SERIAL1 */
+#ifdef CONFIG_SERIAL2
+ enable_uart1_pin_mux();
+#endif /* CONFIG_SERIAL2 */
+#ifdef CONFIG_SERIAL3
+ enable_uart2_pin_mux();
+#endif /* CONFIG_SERIAL3 */
+#ifdef CONFIG_SERIAL4
+ enable_uart3_pin_mux();
+#endif /* CONFIG_SERIAL4 */
+#ifdef CONFIG_SERIAL5
+ enable_uart4_pin_mux();
+#endif /* CONFIG_SERIAL5 */
+#ifdef CONFIG_SERIAL6
+ enable_uart5_pin_mux();
+#endif /* CONFIG_SERIAL6 */
+
+ regVal = readl(&uart_base->uartsyscfg);
+ regVal |= UART_RESET;
+ writel(regVal, &uart_base->uartsyscfg);
+ while ((readl(&uart_base->uartsyssts) &
+ UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
+ ;
+
+ /* Disable smart idle */
+ regVal = readl(&uart_base->uartsyscfg);
+ regVal |= UART_SMART_IDLE_EN;
+ writel(regVal, &uart_base->uartsyscfg);
+
+ gd = &gdata;
+
+ preloader_console_init();
+
+ /* Initalize the board header */
+ enable_i2c0_pin_mux();
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ if (read_eeprom() < 0)
+ puts("Could not get board ID.\n");
+
+ enable_board_pin_mux(&header);
+ if (board_is_evm_sk()) {
+ /*
+ * EVM SK 1.2A and later use gpio0_7 to enable DDR3.
+ * This is safe enough to do on older revs.
+ */
+ gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
+ gpio_direction_output(GPIO_DDR_VTT_EN, 1);
+ }
+
+ if (board_is_evm_sk() || board_is_bone_lt())
+ config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data,
+ &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data);
+ else
+ config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data,
+ &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data);
+#endif
+}
+
+/*
+ * Basic board specific setup. Pinmux has been handled already.
+ */
+int board_init(void)
+{
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ if (read_eeprom() < 0)
+ puts("Could not get board ID.\n");
+
+ gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ char safe_string[HDR_NAME_LEN + 1];
+
+ /* Now set variables based on the header. */
+ strncpy(safe_string, (char *)header.name, sizeof(header.name));
+ safe_string[sizeof(header.name)] = 0;
+ setenv("board_name", safe_string);
+
+ strncpy(safe_string, (char *)header.version, sizeof(header.version));
+ safe_string[sizeof(header.version)] = 0;
+ setenv("board_rev", safe_string);
+#endif
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+static void cpsw_control(int enabled)
+{
+ /* VTP can be added here */
+
+ return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+ {
+ .slave_reg_ofs = 0x208,
+ .sliver_reg_ofs = 0xd80,
+ .phy_id = 0,
+ },
+ {
+ .slave_reg_ofs = 0x308,
+ .sliver_reg_ofs = 0xdc0,
+ .phy_id = 1,
+ },
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = AM335X_CPSW_MDIO_BASE,
+ .cpsw_base = AM335X_CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 8,
+ .cpdma_reg_ofs = 0x800,
+ .slaves = 1,
+ .slave_data = cpsw_slaves,
+ .ale_reg_ofs = 0xd00,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x108,
+ .hw_stats_reg_ofs = 0x900,
+ .mac_control = (1 << 5),
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+ uint8_t mac_addr[6];
+ uint32_t mac_hi, mac_lo;
+
+ if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+ debug("<ethaddr> not set. Reading from E-fuse\n");
+ /* try reading mac address from efuse */
+ mac_lo = readl(&cdev->macid0l);
+ mac_hi = readl(&cdev->macid0h);
+ mac_addr[0] = mac_hi & 0xFF;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+ mac_addr[4] = mac_lo & 0xFF;
+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+
+ if (is_valid_ether_addr(mac_addr))
+ eth_setenv_enetaddr("ethaddr", mac_addr);
+ else
+ return -1;
+ }
+
+ if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
+ writel(MII_MODE_ENABLE, &cdev->miisel);
+ cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
+ PHY_INTERFACE_MODE_MII;
+ } else {
+ writel(RGMII_MODE_ENABLE, &cdev->miisel);
+ cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
+ PHY_INTERFACE_MODE_RGMII;
+ }
+
+ return cpsw_register(&cpsw_data);
+}
+#endif
--- /dev/null
+/*
+ * board.h
+ *
+ * TI AM335x boards information header
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * TI AM335x parts define a system EEPROM that defines certain sub-fields.
+ * We use these fields to in turn see what board we are on, and what
+ * that might require us to set or not set.
+ */
+#define HDR_NO_OF_MAC_ADDR 3
+#define HDR_ETH_ALEN 6
+#define HDR_NAME_LEN 8
+
+struct am335x_baseboard_id {
+ unsigned int magic;
+ char name[HDR_NAME_LEN];
+ char version[4];
+ char serial[12];
+ char config[32];
+ char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN];
+};
+
+/*
+ * We have three pin mux functions that must exist. We must be able to enable
+ * uart0, for initial output and i2c0 to read the main EEPROM. We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_uart1_pin_mux(void);
+void enable_uart2_pin_mux(void);
+void enable_uart3_pin_mux(void);
+void enable_uart4_pin_mux(void);
+void enable_uart5_pin_mux(void);
+void enable_i2c0_pin_mux(void);
+void enable_board_pin_mux(struct am335x_baseboard_id *header);
+#endif
#include <common.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
#include <asm/io.h>
#include <i2c.h>
+#include "board.h"
-#define MUX_CFG(value, offset) \
- __raw_writel(value, (CTRL_BASE + offset));
+static struct module_pin_mux uart0_pin_mux[] = {
+ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
+ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
+ {-1},
+};
-/* PAD Control Fields */
-#define SLEWCTRL (0x1 << 6)
-#define RXACTIVE (0x1 << 5)
-#define PULLUP_EN (0x1 << 4) /* Pull UP Selection */
-#define PULLUDEN (0x0 << 3) /* Pull up enabled */
-#define PULLUDDIS (0x1 << 3) /* Pull up disabled */
-#define MODE(val) val /* used for Readability */
+static struct module_pin_mux uart1_pin_mux[] = {
+ {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART1_RXD */
+ {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, /* UART1_TXD */
+ {-1},
+};
-/*
- * PAD CONTROL OFFSETS
- * Field names corresponds to the pad signal name
- */
-struct pad_signals {
- int gpmc_ad0;
- int gpmc_ad1;
- int gpmc_ad2;
- int gpmc_ad3;
- int gpmc_ad4;
- int gpmc_ad5;
- int gpmc_ad6;
- int gpmc_ad7;
- int gpmc_ad8;
- int gpmc_ad9;
- int gpmc_ad10;
- int gpmc_ad11;
- int gpmc_ad12;
- int gpmc_ad13;
- int gpmc_ad14;
- int gpmc_ad15;
- int gpmc_a0;
- int gpmc_a1;
- int gpmc_a2;
- int gpmc_a3;
- int gpmc_a4;
- int gpmc_a5;
- int gpmc_a6;
- int gpmc_a7;
- int gpmc_a8;
- int gpmc_a9;
- int gpmc_a10;
- int gpmc_a11;
- int gpmc_wait0;
- int gpmc_wpn;
- int gpmc_be1n;
- int gpmc_csn0;
- int gpmc_csn1;
- int gpmc_csn2;
- int gpmc_csn3;
- int gpmc_clk;
- int gpmc_advn_ale;
- int gpmc_oen_ren;
- int gpmc_wen;
- int gpmc_be0n_cle;
- int lcd_data0;
- int lcd_data1;
- int lcd_data2;
- int lcd_data3;
- int lcd_data4;
- int lcd_data5;
- int lcd_data6;
- int lcd_data7;
- int lcd_data8;
- int lcd_data9;
- int lcd_data10;
- int lcd_data11;
- int lcd_data12;
- int lcd_data13;
- int lcd_data14;
- int lcd_data15;
- int lcd_vsync;
- int lcd_hsync;
- int lcd_pclk;
- int lcd_ac_bias_en;
- int mmc0_dat3;
- int mmc0_dat2;
- int mmc0_dat1;
- int mmc0_dat0;
- int mmc0_clk;
- int mmc0_cmd;
- int mii1_col;
- int mii1_crs;
- int mii1_rxerr;
- int mii1_txen;
- int mii1_rxdv;
- int mii1_txd3;
- int mii1_txd2;
- int mii1_txd1;
- int mii1_txd0;
- int mii1_txclk;
- int mii1_rxclk;
- int mii1_rxd3;
- int mii1_rxd2;
- int mii1_rxd1;
- int mii1_rxd0;
- int rmii1_refclk;
- int mdio_data;
- int mdio_clk;
- int spi0_sclk;
- int spi0_d0;
- int spi0_d1;
- int spi0_cs0;
- int spi0_cs1;
- int ecap0_in_pwm0_out;
- int uart0_ctsn;
- int uart0_rtsn;
- int uart0_rxd;
- int uart0_txd;
- int uart1_ctsn;
- int uart1_rtsn;
- int uart1_rxd;
- int uart1_txd;
- int i2c0_sda;
- int i2c0_scl;
- int mcasp0_aclkx;
- int mcasp0_fsx;
- int mcasp0_axr0;
- int mcasp0_ahclkr;
- int mcasp0_aclkr;
- int mcasp0_fsr;
- int mcasp0_axr1;
- int mcasp0_ahclkx;
- int xdma_event_intr0;
- int xdma_event_intr1;
- int nresetin_out;
- int porz;
- int nnmi;
- int osc0_in;
- int osc0_out;
- int rsvd1;
- int tms;
- int tdi;
- int tdo;
- int tck;
- int ntrst;
- int emu0;
- int emu1;
- int osc1_in;
- int osc1_out;
- int pmic_power_en;
- int rtc_porz;
- int rsvd2;
- int ext_wakeup;
- int enz_kaldo_1p8v;
- int usb0_dm;
- int usb0_dp;
- int usb0_ce;
- int usb0_id;
- int usb0_vbus;
- int usb0_drvvbus;
- int usb1_dm;
- int usb1_dp;
- int usb1_ce;
- int usb1_id;
- int usb1_vbus;
- int usb1_drvvbus;
- int ddr_resetn;
- int ddr_csn0;
- int ddr_cke;
- int ddr_ck;
- int ddr_nck;
- int ddr_casn;
- int ddr_rasn;
- int ddr_wen;
- int ddr_ba0;
- int ddr_ba1;
- int ddr_ba2;
- int ddr_a0;
- int ddr_a1;
- int ddr_a2;
- int ddr_a3;
- int ddr_a4;
- int ddr_a5;
- int ddr_a6;
- int ddr_a7;
- int ddr_a8;
- int ddr_a9;
- int ddr_a10;
- int ddr_a11;
- int ddr_a12;
- int ddr_a13;
- int ddr_a14;
- int ddr_a15;
- int ddr_odt;
- int ddr_d0;
- int ddr_d1;
- int ddr_d2;
- int ddr_d3;
- int ddr_d4;
- int ddr_d5;
- int ddr_d6;
- int ddr_d7;
- int ddr_d8;
- int ddr_d9;
- int ddr_d10;
- int ddr_d11;
- int ddr_d12;
- int ddr_d13;
- int ddr_d14;
- int ddr_d15;
- int ddr_dqm0;
- int ddr_dqm1;
- int ddr_dqs0;
- int ddr_dqsn0;
- int ddr_dqs1;
- int ddr_dqsn1;
- int ddr_vref;
- int ddr_vtp;
- int ddr_strben0;
- int ddr_strben1;
- int ain7;
- int ain6;
- int ain5;
- int ain4;
- int ain3;
- int ain2;
- int ain1;
- int ain0;
- int vrefp;
- int vrefn;
+static struct module_pin_mux uart2_pin_mux[] = {
+ {OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */
+ {OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */
+ {-1},
};
-struct module_pin_mux {
- short reg_offset;
- unsigned char val;
+static struct module_pin_mux uart3_pin_mux[] = {
+ {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */
+ {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */
+ {-1},
};
-/* Pad control register offset */
-#define PAD_CTRL_BASE 0x800
-#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \
- (PAD_CTRL_BASE))->x)
+static struct module_pin_mux uart4_pin_mux[] = {
+ {OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */
+ {OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */
+ {-1},
+};
-static struct module_pin_mux uart0_pin_mux[] = {
- {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
- {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
+static struct module_pin_mux uart5_pin_mux[] = {
+ {OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)}, /* UART5_RXD */
+ {OFFSET(lcd_data8), (MODE(4) | PULLUDEN)}, /* UART5_TXD */
{-1},
};
{-1},
};
+static struct module_pin_mux mmc0_no_cd_pin_mux[] = {
+ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
+ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
+ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
+ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
+ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
+ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
+ {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */
+ {-1},
+};
+
static struct module_pin_mux mmc0_pin_mux_sk_evm[] = {
{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
{-1},
};
-/*
- * Configure the pin mux for the module
- */
-static void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux)
+void enable_uart0_pin_mux(void)
{
- int i;
+ configure_module_pin_mux(uart0_pin_mux);
+}
- if (!mod_pin_mux)
- return;
+void enable_uart1_pin_mux(void)
+{
+ configure_module_pin_mux(uart1_pin_mux);
+}
- for (i = 0; mod_pin_mux[i].reg_offset != -1; i++)
- MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset);
+void enable_uart2_pin_mux(void)
+{
+ configure_module_pin_mux(uart2_pin_mux);
}
-void enable_uart0_pin_mux(void)
+void enable_uart3_pin_mux(void)
{
- configure_module_pin_mux(uart0_pin_mux);
+ configure_module_pin_mux(uart3_pin_mux);
+}
+
+void enable_uart4_pin_mux(void)
+{
+ configure_module_pin_mux(uart4_pin_mux);
}
+void enable_uart5_pin_mux(void)
+{
+ configure_module_pin_mux(uart5_pin_mux);
+}
void enable_i2c0_pin_mux(void)
{
configure_module_pin_mux(mmc1_pin_mux);
configure_module_pin_mux(spi0_pin_mux);
}
+ } else if (!strncmp(header->config, "SKU#02", 6)) {
+ /*
+ * Industrial Motor Control (IDK)
+ * note: IDK console is on UART3 by default.
+ * So u-boot mus be build with CONFIG_SERIAL4 and
+ * CONFIG_CONS_INDEX=4
+ */
+ configure_module_pin_mux(mii1_pin_mux);
+ configure_module_pin_mux(mmc0_no_cd_pin_mux);
} else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) {
/* Starter Kit EVM */
configure_module_pin_mux(i2c1_pin_mux);
configure_module_pin_mux(gpio0_7_pin_mux);
configure_module_pin_mux(rgmii1_pin_mux);
configure_module_pin_mux(mmc0_pin_mux_sk_evm);
+ } else if (!strncmp(header->name, "A335BNLT", HDR_NAME_LEN)) {
+ /* Beaglebone LT pinmux */
+ configure_module_pin_mux(i2c1_pin_mux);
+ configure_module_pin_mux(mii1_pin_mux);
+ configure_module_pin_mux(mmc0_pin_mux);
+ configure_module_pin_mux(mmc1_pin_mux);
} else {
puts("Unknown board, cannot configure pinmux.");
hang();
******************************************************************/
void ether_init (void)
{
-#ifdef CONFIG_DRIVER_LAN91C96
+#ifdef CONFIG_LAN91C96
int cnt = 20;
__raw_writeb(0x3,OMAP2420_CTRL_BASE+0x10a); /*protect->gpio95 */
--- /dev/null
+/*
+ * Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch-tegra/board.h>
+
+#include "colibri_t20-common.h"
+
+#ifdef CONFIG_USB_EHCI_TEGRA
+void colibri_t20_common_pin_mux_usb(void)
+{
+ /* module internal USB bus to connect ethernet chipset */
+ funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI);
+ /* ULPI reference clock output */
+ pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4);
+ pinmux_tristate_disable(PINGRP_CDEV2);
+ /* PHY reset GPIO */
+ pinmux_tristate_disable(PINGRP_UAC);
+ /* VBus GPIO */
+ pinmux_tristate_disable(PINGRP_DTE);
+}
+#endif
+
+#ifdef CONFIG_TEGRA_NAND
+void pin_mux_nand(void)
+{
+ funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_NDFLASH_KBC_8_BIT);
+}
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+void colibri_t20_common_pin_mux_usb(void);
--- /dev/null
+#
+# (C) Copyright 2012 Lucas Stach
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+#
+
+include $(TOPDIR)/config.mk
+
+$(shell mkdir -p $(obj)../../nvidia/common)
+$(shell mkdir -p $(obj)../colibri_t20-common)
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := ../../nvidia/common/board.o
+COBJS += ../colibri_t20-common/colibri_t20-common.o
+COBJS += $(BOARD).o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch-tegra/board.h>
+#include <asm/arch-tegra/mmc.h>
+
+#include "../colibri_t20-common/colibri_t20-common.h"
+
+#ifdef CONFIG_USB_EHCI_TEGRA
+void pin_mux_usb(void)
+{
+ colibri_t20_common_pin_mux_usb();
+
+ /* USB 1 aka Tegra USB port 3 VBus*/
+ pinmux_tristate_disable(PINGRP_SPIG);
+}
+#endif
+
+#ifdef CONFIG_TEGRA_MMC
+int board_mmc_init(bd_t *bd)
+{
+ funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT);
+ pinmux_tristate_disable(PINGRP_GMB);
+
+ tegra_mmc_init(0, 4, -1, GPIO_PC7);
+
+ return 0;
+}
+#endif
--- /dev/null
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+ model = "Toradex Colibri T20";
+ compatible = "toradex,t20", "nvidia,tegra20";
+
+ aliases {
+ usb0 = "/usb@c5008000";
+ usb1 = "/usb@c5000000";
+ usb2 = "/usb@c5004000";
+ };
+
+ usb@c5000000 {
+ dr_mode = "otg";
+ };
+
+ usb@c5004000 {
+ nvidia,phy-reset-gpio = <&gpio 169 0>; /* PV1 */
+ nvidia,vbus-gpio = <&gpio 217 0>; /* PBB1 */
+ };
+
+ usb@c5008000 {
+ nvidia,vbus-gpio = <&gpio 178 1>; /* PW2 low-active */
+ };
+
+ nand-controller@70008000 {
+ nvidia,wp-gpios = <&gpio 144 0>; /* PS0 */
+ nvidia,width = <8>;
+ nvidia,timing = <15 100 25 80 25 10 15 10 100>;
+
+ nand@0 {
+ reg = <0>;
+ compatible = "nand-flash";
+ };
+ };
+};
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2012
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
drivers/net/libnet.o (.text*)
drivers/pcmcia/libpcmcia.o (.text.pcmcia_on)
drivers/pcmcia/libpcmcia.o (.text.pcmcia_hardware_enable)
- drivers/rtc/librtc.o (.text*)
- drivers/misc/libmisc.o (.text*)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv*)
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
#include <common.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa.h>
+#include <asm/arch/regs-mmc.h>
#include <netdev.h>
#include <asm/io.h>
return dm9000_initialize(bis);
}
#endif
+
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+ pxa_mmc_register(0);
+ return 0;
+}
+#endif
PROVIDE (edata = .);
. = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = .;
*(.data)
}
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
+
. = ALIGN(4);
.rel.dyn : {
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-const uint edo_60ns[] =
-{ 0x8ffbec24, 0x0ff3ec04, 0x0cf3ec04, 0x00f3ec04,
- 0x00f3ec00, 0x37f7ec47, _NOT_USED_, _NOT_USED_,
- 0x8fffec24, 0x0ffbec04, 0x08f3ec04, 0x07f3ec08,
- 0x08f3ec04, 0x07f3ec48, 0x08f3ec04, 0x07f3ec48,
- 0x08f3ec04, 0x07f3ec48, 0x1ff7ec47, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- 0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x11bfcc47,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- 0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x03afcc4c,
- 0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
- 0x0cafcc00, 0x33bfcc4f, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- 0xc0ffcc84, 0x00ffcc04, 0x07ffcc04, 0x3fffcc06,
- 0xffffcc85, 0xffffcc05, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- 0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
- puts ("Board: AMX860\n");
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- /* AMX860: has 4 Mb of 60ns EDO DRAM, so start DRAM at 0 */
-
- upmconfig(UPMA, (uint *) edo_60ns, sizeof(edo_60ns)/sizeof(uint));
-
-#ifndef CONFIG_AMX_RAM_EXT
- memctl->memc_mptpr = 0x0400; /* divide by 16 */
-#else
- memctl->memc_mptpr = 0x0200;
-#endif
-
- memctl->memc_mamr = 0x30a21114;
- memctl->memc_or2 = 0xffc00800;
-#ifndef CONFIG_AMX_RAM_EXT
- memctl->memc_br2 = 0x81;
-
- return (4 << 20);
-#else
- memctl->memc_or1 = 0xff000800;
- memctl->memc_br1 = 0x00000081;
- memctl->memc_br2 = 0x01000081;
-
- return (20 << 20);
-#endif
-}
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_FLASH
-
-#ifdef DEBUG_FLASH
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size_b0, size_b1;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
-
- size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
-#if defined(FLASH_BASE1_PRELIM) && (FLASH_BASE1_PRELIM != 0)
- DEBUGF("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE1_PRELIM);
-
- size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
- if (size_b1 > size_b0) {
- printf ("## ERROR: "
- "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
- size_b1, size_b1<<20,
- size_b0, size_b0<<20
- );
- flash_info[0].flash_id = FLASH_UNKNOWN;
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[0].sector_count = -1;
- flash_info[1].sector_count = -1;
- flash_info[0].size = 0;
- flash_info[1].size = 0;
- return (0);
- }
-#else
- size_b1 = 0;
-#endif /* FLASH_BASE1_PRELIM */
-
- DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
- DEBUGF ("## Before remap: "
- "BR0: 0x%08x OR0: 0x%08x "
- "BR1: 0x%08x OR1: 0x%08x\n",
- memctl->memc_br0, memctl->memc_or0,
- memctl->memc_br1, memctl->memc_or1);
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
- DEBUGF("## BR0: 0x%08x OR0: 0x%08x\n",
- memctl->memc_br0, memctl->memc_or0);
-
- /* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_info[0].size = size_b0;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
- &flash_info[0]);
-#endif
-
- if (size_b1) {
- memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & OR_AM_MSK);
- memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
- BR_MS_GPCM | BR_V;
-
- DEBUGF("## BR1: 0x%08x OR1: 0x%08x\n",
- memctl->memc_br1, memctl->memc_or1);
-
- /* Re-do sizing to get full correct info */
- size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
- &flash_info[1]);
-
- flash_info[1].size = size_b1;
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-
-# if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[1]);
-# endif
-
-# ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
- &flash_info[1]);
-#endif
- } else {
-#ifndef CONFIG_AMX_RAM_EXT
- memctl->memc_br1 = 0; /* invalidate bank */
- memctl->memc_or1 = 0; /* invalidate bank */
-#endif
-
- DEBUGF("## DISABLE BR1: 0x%08x OR1: 0x%08x\n",
- memctl->memc_br1, memctl->memc_or1);
-
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
- flash_info[1].size = 0;
- }
-
- DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
- return (size_b0 + size_b1);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
- /* set sector offsets for uniform sector type */
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00040000);
- }
- } else if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n");
- break;
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- ulong value;
- ulong base = (ulong)addr;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00900090;
-
- value = addr[0];
-
- DEBUGF("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value);
-
- switch (value) {
- case AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- value = addr[1]; /* device ID */
-
- DEBUGF("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value);
-
- switch (value) {
- case AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#if 0 /* enable when device IDs are available */
- case AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
- }
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr = (volatile unsigned long *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr = (volatile unsigned long *)info->start[0];
-
- *addr = 0x00F000F0; /* reset bank */
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_long*)(info->start[sect]);
- addr[0] = 0x00300030;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_long*)(info->start[l_sect]);
- while ((addr[0] & 0x00800080) != 0x00800080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (volatile unsigned long *)info->start[0];
- addr[0] = 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long*)(info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00A000A0;
-
- *((vu_long *)dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- net/libnet.o (.text*)
- board/westel/amx860/libamx860.o (.text*)
- *(.text.*printf)
-
- . = env_offset;
- common/env_embedded.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- arch/powerpc/lib/extable.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end__ = . ;
- PROVIDE (end = .);
-}
_edata = .;
PROVIDE (edata = .);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
__start___ex_table = .;
integratorap_cm946es arm arm946es integrator armltd - integratorap:CM946ES
integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES
ca9x4_ct_vxp arm armv7 vexpress armltd
-am335x_evm arm armv7 am335x ti am33xx
+am335x_evm arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1
+am335x_evm_uart1 arm armv7 am335x ti am33xx am335x_evm:SERIAL2,CONS_INDEX=2
+am335x_evm_uart2 arm armv7 am335x ti am33xx am335x_evm:SERIAL3,CONS_INDEX=3
+am335x_evm_uart3 arm armv7 am335x ti am33xx am335x_evm:SERIAL4,CONS_INDEX=4
+am335x_evm_uart4 arm armv7 am335x ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5
+am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6
highbank arm armv7 highbank - highbank
mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
mx51_efikasb arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg
mx6qsabreauto arm armv7 mx6qsabreauto freescale mx6 mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg
mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
mx6qsabresd arm armv7 mx6qsabresd freescale mx6 mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+eco5pk arm armv7 eco5pk 8dtech omap3
cm_t35 arm armv7 cm_t35 - omap3
omap3_overo arm armv7 overo - omap3
omap3_pandora arm armv7 pandora - omap3
mcx arm armv7 mcx htkw omap3
tricorder arm armv7 tricorder corscience omap3
twister arm armv7 twister technexion omap3
+nokia_rx51 arm armv7 rx51 nokia omap3
omap4_panda arm armv7 panda ti omap4
omap4_sdp4430 arm armv7 sdp4430 ti omap4
omap5_evm arm armv7 omap5_evm ti omap5
seaboard arm armv7:arm720t seaboard nvidia tegra20
ventana arm armv7:arm720t ventana nvidia tegra20
whistler arm armv7:arm720t whistler nvidia tegra20
+colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20
u8500_href arm armv7 u8500 st-ericsson u8500
snowball arm armv7 snowball st-ericsson u8500
kzm9g arm armv7 kzm9g kmc rmobile
pdnb3 arm ixp pdnb3 prodrive
scpu arm ixp pdnb3 prodrive - pdnb3:SCPU
balloon3 arm pxa
+h2200 arm pxa
lubbock arm pxa
palmld arm pxa
palmtc arm pxa
M5329AFEE m68k mcf532x m5329evb freescale - M5329EVB:NANDFLASH_SIZE=0
M5329BFEE m68k mcf532x m5329evb freescale - M5329EVB:NANDFLASH_SIZE=16
M5373EVB m68k mcf532x m5373evb freescale - M5373EVB:NANDFLASH_SIZE=16
+M54418TWR m68k mcf5445x m54418twr freescale - M54418TWR:CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000
+M54418TWR_nand_mii m68k mcf5445x m54418twr freescale - M54418TWR:SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000
+M54418TWR_nand_rmii m68k mcf5445x m54418twr freescale - M54418TWR:SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000
+M54418TWR_nand_rmii_lowfreq m68k mcf5445x m54418twr freescale - M54418TWR:SYS_NAND_BOOT,LOW_MCFCLK,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000
+M54418TWR_serial_mii m68k mcf5445x m54418twr freescale - M54418TWR:CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000
+M54418TWR_serial_rmii m68k mcf5445x m54418twr freescale - M54418TWR:CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000
M54451EVB m68k mcf5445x m54451evb freescale - M54451EVB:SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000
M54451EVB_stmicro m68k mcf5445x m54451evb freescale - M54451EVB:CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000
M54455EVB m68k mcf5445x m54455evb freescale - M54455EVB:SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333
microblaze-generic microblaze microblaze microblaze-generic xilinx
qemu_mips mips mips32 qemu-mips - - qemu-mips:SYS_BIG_ENDIAN
qemu_mipsel mips mips32 qemu-mips - - qemu-mips:SYS_LITTLE_ENDIAN
+qemu_mips64 mips mips64 qemu-mips - - qemu-mips64:SYS_BIG_ENDIAN
+qemu_mips64el mips mips64 qemu-mips - - qemu-mips64:SYS_LITTLE_ENDIAN
vct_platinum mips mips32 vct micronas - vct:VCT_PLATINUM
vct_platinumavc mips mips32 vct micronas - vct:VCT_PLATINUMAVC
vct_platinumavc_onenand mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND
sorcery powerpc mpc8220
Yukon8220 powerpc mpc8220 alaska
A3000 powerpc mpc824x a3000
-BMW powerpc mpc824x bmw
CPC45 powerpc mpc824x cpc45 - - CPC45
CPC45_ROMBOOT powerpc mpc824x cpc45 - - CPC45:BOOT_ROM
CU824 powerpc mpc824x cu824
VoVPN-GW_66MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_66MHz
mgcoge powerpc mpc8260 km82xx keymile - km82xx:MGCOGE
mgcoge3ne powerpc mpc8260 km82xx keymile - km82xx:MGCOGE3NE
-SCM powerpc mpc8260 - siemens
TQM8255_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8255,300MHz
TQM8260_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz
TQM8260_AB powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz,L2_CACHE,BUSMODE_60x
SIMPC8313_LP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_LP
SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_SP
TQM834x powerpc mpc83xx tqm834x tqc
-suvd3 powerpc mpc83xx km83xx keymile
+suvd3 powerpc mpc83xx km83xx keymile - suvd3:SUVD3
+kmvect1 powerpc mpc83xx km83xx keymile - suvd3:KMVECT1
tuge1 powerpc mpc83xx km83xx keymile - tuxx1:KM_DISABLE_APP2,TUGE1
tuxx1 powerpc mpc83xx km83xx keymile
kmsupx5 powerpc mpc83xx km83xx keymile - tuxx1:KM_DISABLE_APP2,KMSUPX5
-sbc8540 powerpc mpc85xx sbc8560 - - SBC8540
-sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540
-sbc8540_66 powerpc mpc85xx sbc8560 - - SBC8540
sbc8548 powerpc mpc85xx sbc8548 - - sbc8548
sbc8548_PCI_33 powerpc mpc85xx sbc8548 - - sbc8548:PCI,33
sbc8548_PCI_33_PCIE powerpc mpc85xx sbc8548 - - sbc8548:PCI,33,PCIE
sbc8548_PCI_66 powerpc mpc85xx sbc8548 - - sbc8548:PCI,66
sbc8548_PCI_66_PCIE powerpc mpc85xx sbc8548 - - sbc8548:PCI,66,PCIE
-sbc8560 powerpc mpc85xx sbc8560 - - sbc8560
-sbc8560_33 powerpc mpc85xx sbc8560 - - sbc8560
-sbc8560_66 powerpc mpc85xx sbc8560 - - sbc8560
socrates powerpc mpc85xx socrates
HWW1U1A powerpc mpc85xx hww1u1a exmeritus
MPC8536DS powerpc mpc85xx mpc8536ds freescale - MPC8536DS
stxgp3 powerpc mpc85xx stxgp3 stx
stxssa powerpc mpc85xx stxssa stx - stxssa
stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M
+T4240QDS powerpc mpc85xx t4qds freescale
+T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
+T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
xpedite520x powerpc mpc85xx - xes
xpedite537x powerpc mpc85xx - xes
xpedite550x powerpc mpc85xx - xes
AdderII powerpc mpc8xx adder - - Adder:MPC852T
AdderUSB powerpc mpc8xx adder - - Adder
ADS860 powerpc mpc8xx fads
-c2mon powerpc mpc8xx
cogent_mpc8xx powerpc mpc8xx cogent
-EP88x powerpc mpc8xx ep88x
ESTEEM192E powerpc mpc8xx esteem192e
-ETX094 powerpc mpc8xx etx094
FADS823 powerpc mpc8xx fads
FADS850SAR powerpc mpc8xx fads
FADS860T powerpc mpc8xx fads
IVMS8 powerpc mpc8xx ivm - - IVMS8:IVMS8_16M
IVMS8_128 powerpc mpc8xx ivm - - IVMS8:IVMS8_32M
IVMS8_256 powerpc mpc8xx ivm - - IVMS8:IVMS8_64M
-LANTEC powerpc mpc8xx lantec
lwmon powerpc mpc8xx
MBX powerpc mpc8xx mbx8xx
MBX860T powerpc mpc8xx mbx8xx
KUP4X powerpc mpc8xx kup4x kup
ELPT860 powerpc mpc8xx elpt860 LEOX
uc100 powerpc mpc8xx - manroland
-IAD210 powerpc mpc8xx - siemens
QS823 powerpc mpc8xx qs850 snmc
QS850 powerpc mpc8xx qs850 snmc
QS860T powerpc mpc8xx qs860t snmc
TTTech powerpc mpc8xx tqm8xx tqc - TQM823L:LCD,SHARP_LQ104V7DS01
virtlab2 powerpc mpc8xx tqm8xx tqc
wtk powerpc mpc8xx tqm8xx tqc - TQM823L:LCD,SHARP_LQ065T9DR51U
-AMX860 powerpc mpc8xx amx860 westel
csb272 powerpc ppc4xx
csb472 powerpc ppc4xx
G2000 powerpc ppc4xx g2000
COBJS-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o
COBJS-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o
COBJS-$(CONFIG_CMD_CACHE) += cmd_cache.o
+COBJS-$(CONFIG_CMD_CBFS) += cmd_cbfs.o
COBJS-$(CONFIG_CMD_CONSOLE) += cmd_console.o
COBJS-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o
COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o
COBJS-$(CONFIG_SYS_HUSH_PARSER) += cmd_exit.o
COBJS-$(CONFIG_CMD_EXT4) += cmd_ext4.o
COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o
-ifdef CONFIG_CMD_EXT4
-COBJS-y += cmd_ext_common.o
-else
-COBJS-$(CONFIG_CMD_EXT2) += cmd_ext_common.o
-endif
COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o
COBJS-$(CONFIG_CMD_FDC)$(CONFIG_CMD_FDOS) += cmd_fdc.o
COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o
ifdef CONFIG_FPGA
COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o
endif
+COBJS-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o
COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o
COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o
COBJS-$(CONFIG_CMD_IDE) += cmd_ide.o
COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_nowhere.o
COBJS-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
endif
+COBJS-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o
COBJS-y += console.o
COBJS-y += dlmalloc.o
COBJS-y += image.o
--- /dev/null
+/*
+ * Generic bounce buffer implementation
+ *
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <bouncebuf.h>
+
+static int addr_aligned(void *data, size_t len)
+{
+ const ulong align_mask = ARCH_DMA_MINALIGN - 1;
+
+ /* Check if start is aligned */
+ if ((ulong)data & align_mask) {
+ debug("Unaligned start address %p\n", data);
+ return 0;
+ }
+
+ data += len;
+
+ /* Check if end is aligned */
+ if ((ulong)data & align_mask) {
+ debug("Unaligned end address %p\n", data);
+ return 0;
+ }
+
+ /* Aligned */
+ return 1;
+}
+
+int bounce_buffer_start(void **data, size_t len, void **backup, uint8_t flags)
+{
+ void *tmp;
+ size_t alen;
+
+ if (addr_aligned(*data, len)) {
+ *backup = NULL;
+ return 0;
+ }
+
+ alen = roundup(len, ARCH_DMA_MINALIGN);
+ tmp = memalign(ARCH_DMA_MINALIGN, alen);
+
+ if (!tmp)
+ return -ENOMEM;
+
+ if (flags & GEN_BB_READ)
+ memcpy(tmp, *data, len);
+
+ *backup = *data;
+ *data = tmp;
+
+ return 0;
+}
+
+int bounce_buffer_stop(void **data, size_t len, void **backup, uint8_t flags)
+{
+ void *tmp = *data;
+
+ /* The buffer was already aligned, since "backup" is NULL. */
+ if (!*backup)
+ return 0;
+
+ if (flags & GEN_BB_WRITE)
+ memcpy(*backup, *data, len);
+
+ *data = *backup;
+ free(tmp);
+
+ return 0;
+}
print_mhz("ethspeed", bd->bi_ethspeed);
#endif
printf("IP addr = %s\n", getenv("ipaddr"));
- printf("baudrate = %6ld bps\n", bd->bi_baudrate);
+ printf("baudrate = %6u bps\n", bd->bi_baudrate);
print_num("relocaddr", gd->relocaddr);
return 0;
}
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %ld bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", bd->bi_baudrate);
return 0;
}
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %ld bps\n", (ulong)bd->bi_baudrate);
+ printf("baudrate = %u bps\n", (ulong)bd->bi_baudrate);
return 0;
}
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %6ld bps\n", bd->bi_baudrate);
+ printf("baudrate = %6u bps\n", bd->bi_baudrate);
return 0;
}
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %ld bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", bd->bi_baudrate);
return 0;
}
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
- printf("baudrate = %d bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", bd->bi_baudrate);
return 0;
}
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
- printf("baudrate = %d bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", bd->bi_baudrate);
return 0;
}
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
- printf("baudrate = %lu bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", bd->bi_baudrate);
return 0;
}
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %d bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", bd->bi_baudrate);
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
print_num("TLB addr", gd->tlb_addr);
#endif
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %ld bps\n", (ulong)bd->bi_baudrate);
+ printf("baudrate = %u bps\n", bd->bi_baudrate);
return 0;
}
printf("ip_addr = %s\n", getenv("ipaddr"));
print_mhz("ethspeed", bd->bi_ethspeed);
#endif
- printf("baudrate = %d bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", bd->bi_baudrate);
return 0;
}
print_eth(0);
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %d bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", bd->bi_baudrate);
return 0;
}
printf("ip_addr = %s\n", getenv("ipaddr"));
#endif
- printf("baudrate = %ld bps\n", bd->bi_baudrate);
+ printf("baudrate = %u bps\n", bd->bi_baudrate);
return 0;
}
/* Allow ports to override the default behavior */
__attribute__((weak))
-unsigned long do_go_exec (ulong (*entry)(int, char * const []), int argc, char * const argv[])
+unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc,
+ char * const argv[])
{
return entry (argc, argv);
}
-int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_go(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr, rc;
int rcode = 0;
bootm_headers_t images; /* pointers to os/initrd/fdt images */
/* Allow for arch specific config before we boot */
-void __arch_preboot_os(void)
+static void __arch_preboot_os(void)
{
/* please define platform specific arch_preboot_os() */
}
U_BOOT_CMD_MKENT(go, 0, 1, (void *)BOOTM_STATE_OS_GO, "", ""),
};
-int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc,
+static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
int ret = 0;
return (void *)img_addr;
}
-U_BOOT_CMD(
- bootm, CONFIG_SYS_MAXARGS, 1, do_bootm,
- "boot application image from memory",
+#ifdef CONFIG_SYS_LONGHELP
+static char bootm_help_text[] =
"[addr [arg ...]]\n - boot application image stored in memory\n"
"\tpassing arguments 'arg ...'; when booting a Linux kernel,\n"
"\t'arg' can be the address of an initrd image\n"
"\tcmdline - OS specific command line processing/setup\n"
"\tbdt - OS specific bd_t processing\n"
"\tprep - OS specific prep before relocation or go\n"
- "\tgo - start OS"
+ "\tgo - start OS";
+#endif
+
+U_BOOT_CMD(
+ bootm, CONFIG_SYS_MAXARGS, 1, do_bootm,
+ "boot application image from memory", bootm_help_text
);
/*******************************************************************/
/* iminfo - print header info for a requested image */
/*******************************************************************/
#if defined(CONFIG_CMD_IMI)
-int do_iminfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_iminfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int arg;
ulong addr;
/* imls - list all images found in flash */
/*******************************************************************/
#if defined(CONFIG_CMD_IMLS)
-int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
flash_info_t *info;
int i, j;
return 1;
}
-U_BOOT_CMD(
- bootz, CONFIG_SYS_MAXARGS, 1, do_bootz,
- "boot Linux zImage image from memory",
+#ifdef CONFIG_SYS_LONGHELP
+static char bootz_help_text[] =
"[addr [initrd[:size]] [fdt]]\n"
" - boot Linux zImage stored in memory\n"
"\tThe argument 'initrd' is optional and specifies the address\n"
"\tuse a '-' for the second argument. If you do not pass a third\n"
"\ta bd_info struct will be passed instead\n"
#endif
+ "";
+#endif
+
+U_BOOT_CMD(
+ bootz, CONFIG_SYS_MAXARGS, 1, do_bootz,
+ "boot Linux zImage image from memory", bootz_help_text
);
#endif /* CONFIG_CMD_BOOTZ */
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CBFS commands
+ */
+#include <common.h>
+#include <command.h>
+#include <cbfs.h>
+
+int do_cbfs_init(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ uintptr_t end_of_rom = 0xffffffff;
+ char *ep;
+
+ if (argc > 2) {
+ printf("usage: cbfsls [end of rom]>\n");
+ return 0;
+ }
+ if (argc == 2) {
+ end_of_rom = (int)simple_strtoul(argv[1], &ep, 16);
+ if (*ep) {
+ puts("\n** Invalid end of ROM **\n");
+ return 1;
+ }
+ }
+ file_cbfs_init(end_of_rom);
+ if (file_cbfs_result != CBFS_SUCCESS) {
+ printf("%s.\n", file_cbfs_error());
+ return 1;
+ }
+ return 0;
+}
+
+U_BOOT_CMD(
+ cbfsinit, 2, 0, do_cbfs_init,
+ "initialize the cbfs driver",
+ "[end of rom]\n"
+ " - Initialize the cbfs driver. The optional 'end of rom'\n"
+ " parameter specifies where the end of the ROM is that the\n"
+ " CBFS is in. It defaults to 0xFFFFFFFF\n"
+);
+
+int do_cbfs_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ const struct cbfs_cachenode *file;
+ unsigned long offset;
+ unsigned long count;
+ char buf[12];
+ long size;
+
+ if (argc < 3) {
+ printf("usage: cbfsload <addr> <filename> [bytes]\n");
+ return 1;
+ }
+
+ /* parse offset and count */
+ offset = simple_strtoul(argv[1], NULL, 16);
+ if (argc == 4)
+ count = simple_strtoul(argv[3], NULL, 16);
+ else
+ count = 0;
+
+ file = file_cbfs_find(argv[2]);
+ if (!file) {
+ if (file_cbfs_result == CBFS_FILE_NOT_FOUND)
+ printf("%s: %s\n", file_cbfs_error(), argv[2]);
+ else
+ printf("%s.\n", file_cbfs_error());
+ return 1;
+ }
+
+ printf("reading %s\n", file_cbfs_name(file));
+
+ size = file_cbfs_read(file, (void *)offset, count);
+
+ printf("\n%ld bytes read\n", size);
+
+ sprintf(buf, "%lX", size);
+ setenv("filesize", buf);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ cbfsload, 4, 0, do_cbfs_fsload,
+ "load binary file from a cbfs filesystem",
+ "<addr> <filename> [bytes]\n"
+ " - load binary file 'filename' from the cbfs to address 'addr'\n"
+);
+
+int do_cbfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ const struct cbfs_cachenode *file = file_cbfs_get_first();
+ int files = 0;
+
+ if (!file) {
+ printf("%s.\n", file_cbfs_error());
+ return 1;
+ }
+
+ printf(" size type name\n");
+ printf("------------------------------------------\n");
+ while (file) {
+ u32 type = file_cbfs_type(file);
+ char *type_name = NULL;
+ const char *filename = file_cbfs_name(file);
+
+ printf(" %8d", file_cbfs_size(file));
+
+ switch (type) {
+ case CBFS_TYPE_STAGE:
+ type_name = "stage";
+ break;
+ case CBFS_TYPE_PAYLOAD:
+ type_name = "payload";
+ break;
+ case CBFS_TYPE_OPTIONROM:
+ type_name = "option rom";
+ break;
+ case CBFS_TYPE_BOOTSPLASH:
+ type_name = "boot splash";
+ break;
+ case CBFS_TYPE_RAW:
+ type_name = "raw";
+ break;
+ case CBFS_TYPE_VSA:
+ type_name = "vsa";
+ break;
+ case CBFS_TYPE_MBI:
+ type_name = "mbi";
+ break;
+ case CBFS_TYPE_MICROCODE:
+ type_name = "microcode";
+ break;
+ case CBFS_COMPONENT_CMOS_DEFAULT:
+ type_name = "cmos default";
+ break;
+ case CBFS_COMPONENT_CMOS_LAYOUT:
+ type_name = "cmos layout";
+ break;
+ case -1UL:
+ type_name = "null";
+ break;
+ }
+ if (type_name)
+ printf(" %16s", type_name);
+ else
+ printf(" %16d", type);
+
+ if (filename[0])
+ printf(" %s\n", filename);
+ else
+ printf(" %s\n", "(empty)");
+ file_cbfs_get_next(&file);
+ files++;
+ }
+
+ printf("\n%d file(s)\n\n", files);
+ return 0;
+}
+
+U_BOOT_CMD(
+ cbfsls, 1, 1, do_cbfs_ls,
+ "list files",
+ " - list the files in the cbfs\n"
+);
+
+int do_cbfs_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ const struct cbfs_header *header = file_cbfs_get_header();
+
+ if (!header) {
+ printf("%s.\n", file_cbfs_error());
+ return 1;
+ }
+
+ printf("\n");
+ printf("CBFS version: %#x\n", header->version);
+ printf("ROM size: %#x\n", header->rom_size);
+ printf("Boot block size: %#x\n", header->boot_block_size);
+ printf("CBFS size: %#x\n",
+ header->rom_size - header->boot_block_size - header->offset);
+ printf("Alignment: %d\n", header->align);
+ printf("Offset: %#x\n", header->offset);
+ printf("\n");
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ cbfsinfo, 1, 1, do_cbfs_fsinfo,
+ "print information about filesystem",
+ " - print information about the cbfs filesystem\n"
+);
#include <stdio_dev.h>
extern void _do_coninfo (void);
-int do_coninfo (cmd_tbl_t * cmd, int flag, int argc, char * const argv[])
+static int do_coninfo(cmd_tbl_t *cmd, int flag, int argc, char * const argv[])
{
int l;
struct list_head *list = stdio_get_list();
int mk_date (const char *, struct rtc_time *);
-int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_date(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
struct rtc_time tm;
int rcode = 0;
#include <common.h>
#include <command.h>
-int do_echo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_echo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i;
int putnl = 1;
#include <common.h>
#include <command.h>
-int do_exit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_exit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int r;
/*
* Ext2fs support
*/
-#include <common.h>
-#include <ext_common.h>
+#include <fs.h>
int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- if (do_ext_ls(cmdtp, flag, argc, argv))
- return -1;
-
- return 0;
+ return do_ls(cmdtp, flag, argc, argv, FS_TYPE_EXT);
}
/******************************************************************************
*/
int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- if (do_ext_load(cmdtp, flag, argc, argv))
- return -1;
-
- return 0;
+ return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT, 16);
}
U_BOOT_CMD(
"load binary file from a Ext2 filesystem",
"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
- " to address 'addr' from ext2 filesystem"
+ " to address 'addr' from ext2 filesystem.\n"
+ " All numeric parameters are assumed to be hex."
);
#include <image.h>
#include <linux/ctype.h>
#include <asm/byteorder.h>
-#include <ext_common.h>
#include <ext4fs.h>
#include <linux/stat.h>
#include <malloc.h>
+#include <fs.h>
#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
#include <usb.h>
int do_ext4_load(cmd_tbl_t *cmdtp, int flag, int argc,
char *const argv[])
{
- if (do_ext_load(cmdtp, flag, argc, argv))
- return -1;
-
- return 0;
+ return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT, 16);
}
int do_ext4_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
- if (do_ext_ls(cmdtp, flag, argc, argv))
- return -1;
-
- return 0;
+ return do_ls(cmdtp, flag, argc, argv, FS_TYPE_EXT);
}
#if defined(CONFIG_CMD_EXT4_WRITE)
/* mount the filesystem */
if (!ext4fs_mount(info.size)) {
- printf("Bad ext4 partition %s %d:%lu\n", argv[1], dev, part);
+ printf("Bad ext4 partition %s %d:%d\n", argv[1], dev, part);
goto fail;
}
U_BOOT_CMD(ext4write, 6, 1, do_ext4_write,
"create a file in the root directory",
"<interface> <dev[:part]> [Absolute filename path] [Address] [sizebytes]\n"
- " - create a file in / directory");
+ " - create a file in / directory");
#endif
U_BOOT_CMD(ext4ls, 4, 1, do_ext4_ls,
"list files in a directory (default /)",
"<interface> <dev[:part]> [directory]\n"
- " - list files from 'dev' on 'interface' in a 'directory'");
+ " - list files from 'dev' on 'interface' in a 'directory'");
U_BOOT_CMD(ext4load, 6, 0, do_ext4_load,
"load binary file from a Ext4 filesystem",
"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
- " - load binary file 'filename' from 'dev' on 'interface'\n"
- " to address 'addr' from ext4 filesystem");
+ " - load binary file 'filename' from 'dev' on 'interface'\n"
+ " to address 'addr' from ext4 filesystem.\n"
+ " All numeric parameters are assumed to be hex.");
+++ /dev/null
-/*
- * (C) Copyright 2011 - 2012 Samsung Electronics
- * EXT2/4 filesystem implementation in Uboot by
- * Uma Shankar <uma.shankar@samsung.com>
- * Manjunatha C Achar <a.manjunatha@samsung.com>
- *
- * Ext4fs support
- * made from existing cmd_ext2.c file of Uboot
- *
- * (C) Copyright 2004
- * esd gmbh <www.esd-electronics.com>
- * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- *
- * made from cmd_reiserfs by
- *
- * (C) Copyright 2003 - 2004
- * Sysgo Real-Time Solutions, AG <www.elinos.com>
- * Pavel Bartusek <pba@sysgo.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/*
- * Changelog:
- * 0.1 - Newly created file for ext4fs support. Taken from cmd_ext2.c
- * file in uboot. Added ext4fs ls load and write support.
- */
-
-#include <common.h>
-#include <part.h>
-#include <config.h>
-#include <command.h>
-#include <image.h>
-#include <linux/ctype.h>
-#include <asm/byteorder.h>
-#include <ext_common.h>
-#include <ext4fs.h>
-#include <linux/stat.h>
-#include <malloc.h>
-
-#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
-#include <usb.h>
-#endif
-
-#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
-#error DOS or EFI partition support must be selected
-#endif
-
-#define DOS_PART_MAGIC_OFFSET 0x1fe
-#define DOS_FS_TYPE_OFFSET 0x36
-#define DOS_FS32_TYPE_OFFSET 0x52
-
-int do_ext_load(cmd_tbl_t *cmdtp, int flag, int argc,
- char *const argv[])
-{
- char *filename = NULL;
- int dev, part;
- ulong addr = 0;
- int filelen;
- disk_partition_t info;
- block_dev_desc_t *dev_desc;
- char buf[12];
- unsigned long count;
- const char *addr_str;
-
- count = 0;
- addr = simple_strtoul(argv[3], NULL, 16);
- filename = getenv("bootfile");
- switch (argc) {
- case 3:
- addr_str = getenv("loadaddr");
- if (addr_str != NULL)
- addr = simple_strtoul(addr_str, NULL, 16);
- else
- addr = CONFIG_SYS_LOAD_ADDR;
-
- break;
- case 4:
- break;
- case 5:
- filename = argv[4];
- break;
- case 6:
- filename = argv[4];
- count = simple_strtoul(argv[5], NULL, 16);
- break;
-
- default:
- return cmd_usage(cmdtp);
- }
-
- if (!filename) {
- puts("** No boot file defined **\n");
- return 1;
- }
-
- part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
- if (part < 0)
- return 1;
-
- dev = dev_desc->dev;
- printf("Loading file \"%s\" from %s device %d%c%c\n",
- filename, argv[1], dev,
- part ? ':' : ' ', part ? part + '0' : ' ');
-
- ext4fs_set_blk_dev(dev_desc, &info);
-
- if (!ext4fs_mount(info.size)) {
- printf("** Bad ext2 partition or disk - %s %d:%d **\n",
- argv[1], dev, part);
- ext4fs_close();
- goto fail;
- }
-
- filelen = ext4fs_open(filename);
- if (filelen < 0) {
- printf("** File not found %s\n", filename);
- ext4fs_close();
- goto fail;
- }
- if ((count < filelen) && (count != 0))
- filelen = count;
-
- if (ext4fs_read((char *)addr, filelen) != filelen) {
- printf("** Unable to read \"%s\" from %s %d:%d **\n",
- filename, argv[1], dev, part);
- ext4fs_close();
- goto fail;
- }
-
- ext4fs_close();
- /* Loading ok, update default load address */
- load_addr = addr;
-
- printf("%d bytes read\n", filelen);
- sprintf(buf, "%X", filelen);
- setenv("filesize", buf);
-
- return 0;
-fail:
- return 1;
-}
-
-int do_ext_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
-{
- const char *filename = "/";
- int dev;
- int part;
- block_dev_desc_t *dev_desc;
- disk_partition_t info;
-
- if (argc < 2)
- return cmd_usage(cmdtp);
-
- part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
- if (part < 0)
- return 1;
-
- if (argc == 4)
- filename = argv[3];
-
- dev = dev_desc->dev;
- ext4fs_set_blk_dev(dev_desc, &info);
-
- if (!ext4fs_mount(info.size)) {
- printf("** Bad ext2 partition or disk - %s %d:%d **\n",
- argv[1], dev, part);
- ext4fs_close();
- goto fail;
- }
-
- if (ext4fs_ls(filename)) {
- printf("** Error extfs_ls() **\n");
- ext4fs_close();
- goto fail;
- };
-
- ext4fs_close();
- return 0;
-
-fail:
- return 1;
-}
#include <ata.h>
#include <part.h>
#include <fat.h>
-
+#include <fs.h>
int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- long size;
- unsigned long offset;
- unsigned long count = 0;
- unsigned long pos = 0;
- char buf [12];
- block_dev_desc_t *dev_desc=NULL;
- disk_partition_t info;
- int part, dev;
-
- if (argc < 5) {
- printf("usage: fatload <interface> [<dev[:part]>] "
- "<addr> <filename> [bytes [pos]]\n");
- return 1;
- }
-
- part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
- if (part < 0)
- return 1;
-
- dev = dev_desc->dev;
- if (fat_register_device(dev_desc,part)!=0) {
- printf("\n** Unable to use %s %d:%d for fatload **\n",
- argv[1], dev, part);
- return 1;
- }
- offset = simple_strtoul(argv[3], NULL, 16);
- if (argc >= 6)
- count = simple_strtoul(argv[5], NULL, 16);
- if (argc >= 7)
- pos = simple_strtoul(argv[6], NULL, 16);
- size = file_fat_read_at(argv[4], pos, (unsigned char *)offset, count);
-
- if(size==-1) {
- printf("\n** Unable to read \"%s\" from %s %d:%d **\n",
- argv[4], argv[1], dev, part);
- return 1;
- }
-
- printf("\n%ld bytes read\n", size);
-
- sprintf(buf, "%lX", size);
- setenv("filesize", buf);
-
- return 0;
+ return do_load(cmdtp, flag, argc, argv, FS_TYPE_FAT, 16);
}
" 'pos' gives the file position to start loading from.\n"
" If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n"
" 'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n"
- " the load stops on end of file."
+ " the load stops on end of file.\n"
+ " All numeric parameters are assumed to be hex."
);
-int do_fat_ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_fat_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- char *filename = "/";
- int ret, dev, part;
- block_dev_desc_t *dev_desc=NULL;
- disk_partition_t info;
-
- if (argc < 2) {
- printf("usage: fatls <interface> [<dev[:part]>] [directory]\n");
- return 0;
- }
-
- part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
- if (part < 0)
- return 1;
-
- dev = dev_desc->dev;
- if (fat_register_device(dev_desc,part)!=0) {
- printf("\n** Unable to use %s %d:%d for fatls **\n",
- argv[1], dev, part);
- return 1;
- }
- if (argc == 4)
- ret = file_fat_ls(argv[3]);
- else
- ret = file_fat_ls(filename);
-
- if(ret!=0)
- printf("No Fat FS detected\n");
- return ret;
+ return do_ls(cmdtp, flag, argc, argv, FS_TYPE_FAT);
}
U_BOOT_CMD(
" - list files from 'dev' on 'interface' in a 'directory'"
);
-int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_fat_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
int dev, part;
block_dev_desc_t *dev_desc;
return 1;
dev = dev_desc->dev;
- if (fat_register_device(dev_desc,part)!=0) {
+ if (fat_set_blk_dev(dev_desc, &info) != 0) {
printf("\n** Unable to use %s %d:%d for fatinfo **\n",
argv[1], dev, part);
return 1;
dev = dev_desc->dev;
- if (fat_register_device(dev_desc, part) != 0) {
+ if (fat_set_blk_dev(dev_desc, &info) != 0) {
printf("\n** Unable to use %s %d:%d for fatwrite **\n",
argv[1], dev, part);
return 1;
#define MAX_LEVEL 32 /* how deeply nested we will go */
#define SCRATCHPAD 1024 /* bytes of scratchpad memory */
+#ifndef CONFIG_CMD_FDT_MAX_DUMP
+#define CONFIG_CMD_FDT_MAX_DUMP 64
+#endif
/*
* Global data (for the gd->bd)
static int fdt_valid(void);
static int fdt_parse_prop(char *const*newval, int count, char *data, int *len);
static int fdt_print(const char *pathp, char *prop, int depth);
+static int is_printable_string(const void *data, int len);
/*
* The working_fdt points to our working flattened device tree.
setenv("fdtaddr", buf);
}
+/*
+ * Get a value from the fdt and format it to be set in the environment
+ */
+static int fdt_value_setenv(const void *nodep, int len, const char *var)
+{
+ if (is_printable_string(nodep, len))
+ setenv(var, (void *)nodep);
+ else if (len == 4) {
+ char buf[11];
+
+ sprintf(buf, "0x%08X", *(uint32_t *)nodep);
+ setenv(var, buf);
+ } else if (len%4 == 0 && len <= 20) {
+ /* Needed to print things like sha1 hashes. */
+ char buf[41];
+ int i;
+
+ for (i = 0; i < len; i += sizeof(unsigned int))
+ sprintf(buf + (i * 2), "%08x",
+ *(unsigned int *)(nodep + i));
+ setenv(var, buf);
+ } else {
+ printf("error: unprintable value\n");
+ return 1;
+ }
+ return 0;
+}
+
/*
* Flattened Device Tree command, see the help for parameter definitions.
*/
-int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc < 2)
return CMD_RET_USAGE;
return 1;
}
+ /********************************************************************
+ * Get the value of a property in the working_fdt.
+ ********************************************************************/
+ } else if (argv[1][0] == 'g') {
+ char *subcmd; /* sub-command */
+ char *pathp; /* path */
+ char *prop; /* property */
+ char *var; /* variable to store result */
+ int nodeoffset; /* node offset from libfdt */
+ const void *nodep; /* property node pointer */
+ int len = 0; /* new length of the property */
+
+ /*
+ * Parameters: Node path, property, optional value.
+ */
+ if (argc < 5)
+ return CMD_RET_USAGE;
+
+ subcmd = argv[2];
+
+ if (argc < 6 && subcmd[0] != 's')
+ return CMD_RET_USAGE;
+
+ var = argv[3];
+ pathp = argv[4];
+ prop = argv[5];
+
+ nodeoffset = fdt_path_offset(working_fdt, pathp);
+ if (nodeoffset < 0) {
+ /*
+ * Not found or something else bad happened.
+ */
+ printf("libfdt fdt_path_offset() returned %s\n",
+ fdt_strerror(nodeoffset));
+ return 1;
+ }
+
+ if (subcmd[0] == 'n' || (subcmd[0] == 's' && argc == 5)) {
+ int reqIndex = -1;
+ int startDepth = fdt_node_depth(
+ working_fdt, nodeoffset);
+ int curDepth = startDepth;
+ int curIndex = -1;
+ int nextNodeOffset = fdt_next_node(
+ working_fdt, nodeoffset, &curDepth);
+
+ if (subcmd[0] == 'n')
+ reqIndex = simple_strtoul(argv[5], NULL, 16);
+
+ while (curDepth > startDepth) {
+ if (curDepth == startDepth + 1)
+ curIndex++;
+ if (subcmd[0] == 'n' && curIndex == reqIndex) {
+ const char *nodeName = fdt_get_name(
+ working_fdt, nextNodeOffset, NULL);
+
+ setenv(var, (char *)nodeName);
+ return 0;
+ }
+ nextNodeOffset = fdt_next_node(
+ working_fdt, nextNodeOffset, &curDepth);
+ if (nextNodeOffset < 0)
+ break;
+ }
+ if (subcmd[0] == 's') {
+ /* get the num nodes at this level */
+ char buf[11];
+
+ sprintf(buf, "%d", curIndex + 1);
+ setenv(var, buf);
+ } else {
+ /* node index not found */
+ printf("libfdt node not found\n");
+ return 1;
+ }
+ } else {
+ nodep = fdt_getprop(
+ working_fdt, nodeoffset, prop, &len);
+ if (len == 0) {
+ /* no property value */
+ setenv(var, "");
+ return 0;
+ } else if (len > 0) {
+ if (subcmd[0] == 'v') {
+ int ret;
+
+ ret = fdt_value_setenv(nodep, len, var);
+ if (ret != 0)
+ return ret;
+ } else if (subcmd[0] == 'a') {
+ /* Get address */
+ char buf[11];
+
+ sprintf(buf, "0x%p", nodep);
+ setenv(var, buf);
+ } else if (subcmd[0] == 's') {
+ /* Get size */
+ char buf[11];
+
+ sprintf(buf, "0x%08X", len);
+ setenv(var, buf);
+ } else
+ return CMD_RET_USAGE;
+ return 0;
+ } else {
+ printf("libfdt fdt_getprop(): %s\n",
+ fdt_strerror(len));
+ return 1;
+ }
+ }
+
/*
* Print (recursive) / List (single level)
*/
cp = newp;
tmp = simple_strtoul(cp, &newp, 0);
- *(uint32_t *)data = __cpu_to_be32(tmp);
+ *(__be32 *)data = __cpu_to_be32(tmp);
data += 4;
*len += 4;
if (len == 0)
return 0;
- /* must terminate with zero */
- if (s[len - 1] != '\0')
+ /* must terminate with zero or '\n' */
+ if (s[len - 1] != '\0' && s[len - 1] != '\n')
return 0;
/* printable or a null byte (concatenated strings) */
- while (((*s == '\0') || isprint(*s)) && (len > 0)) {
+ while (((*s == '\0') || isprint(*s) || isspace(*s)) && (len > 0)) {
/*
* If we see a null, there are three possibilities:
* 1) If len == 1, it is the end of the string, printable
}
if ((len %4) == 0) {
- const u32 *p;
-
- printf("<");
- for (j = 0, p = data; j < len/4; j ++)
- printf("0x%x%s", fdt32_to_cpu(p[j]), j < (len/4 - 1) ? " " : "");
- printf(">");
+ if (len > CONFIG_CMD_FDT_MAX_DUMP)
+ printf("* 0x%p [0x%08x]", data, len);
+ else {
+ const __be32 *p;
+
+ printf("<");
+ for (j = 0, p = data; j < len/4; j++)
+ printf("0x%08x%s", fdt32_to_cpu(p[j]),
+ j < (len/4 - 1) ? " " : "");
+ printf(">");
+ }
} else { /* anything else... hexdump */
- const u8 *s;
-
- printf("[");
- for (j = 0, s = data; j < len; j++)
- printf("%02x%s", s[j], j < len - 1 ? " " : "");
- printf("]");
+ if (len > CONFIG_CMD_FDT_MAX_DUMP)
+ printf("* 0x%p [0x%08x]", data, len);
+ else {
+ const u8 *s;
+
+ printf("[");
+ for (j = 0, s = data; j < len; j++)
+ printf("%02x%s", s[j], j < len - 1 ? " " : "");
+ printf("]");
+ }
}
}
}
/********************************************************************/
-
-U_BOOT_CMD(
- fdt, 255, 0, do_fdt,
- "flattened device tree utility commands",
- "addr <addr> [<length>] - Set the fdt location to <addr>\n"
+#ifdef CONFIG_SYS_LONGHELP
+static char fdt_help_text[] =
+ "addr <addr> [<length>] - Set the fdt location to <addr>\n"
#ifdef CONFIG_OF_BOARD_SETUP
"fdt boardsetup - Do board-specific set up\n"
#endif
"fdt resize - Resize fdt to size + padding to 4k addr\n"
"fdt print <path> [<prop>] - Recursive print starting at <path>\n"
"fdt list <path> [<prop>] - Print one level starting at <path>\n"
+ "fdt get value <var> <path> <prop> - Get <property> and store in <var>\n"
+ "fdt get name <var> <path> <index> - Get name of node <index> and store in <var>\n"
+ "fdt get addr <var> <path> <prop> - Get start address of <property> and store in <var>\n"
+ "fdt get size <var> <path> [<prop>] - Get size of [<property>] or num nodes and store in <var>\n"
"fdt set <path> <prop> [<val>] - Set <property> [to <val>]\n"
"fdt mknode <path> <node> - Create a new node after <path>\n"
"fdt rm <path> [<prop>] - Delete the node or <property>\n"
"fdt chosen [<start> <end>] - Add/update the /chosen branch in the tree\n"
" <start>/<end> - initrd start/end addr\n"
"NOTE: Dereference aliases by omiting the leading '/', "
- "e.g. fdt print ethernet0."
+ "e.g. fdt print ethernet0.";
+#endif
+
+U_BOOT_CMD(
+ fdt, 255, 0, do_fdt,
+ "flattened device tree utility commands", fdt_help_text
);
}
#endif /* CONFIG_SYS_NO_FLASH */
-int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_flinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
#ifndef CONFIG_SYS_NO_FLASH
ulong bank;
return 0;
}
-int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_flerase(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
#ifndef CONFIG_SYS_NO_FLASH
flash_info_t *info = NULL;
}
#endif /* CONFIG_SYS_NO_FLASH */
-int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_protect(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int rcode = 0;
#ifndef CONFIG_SYS_NO_FLASH
--- /dev/null
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Inspired by cmd_ext_common.c, cmd_fat.c.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <fs.h>
+
+int do_load_wrapper(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ return do_load(cmdtp, flag, argc, argv, FS_TYPE_ANY, 0);
+}
+
+U_BOOT_CMD(
+ load, 7, 0, do_load_wrapper,
+ "load binary file from a filesystem",
+ "<interface> [<dev[:part]> [<addr> [<filename> [bytes [pos]]]]]\n"
+ " - Load binary file 'filename' from partition 'part' on device\n"
+ " type 'interface' instance 'dev' to address 'addr' in memory.\n"
+ " 'bytes' gives the size to load in bytes.\n"
+ " If 'bytes' is 0 or omitted, the file is read until the end.\n"
+ " 'pos' gives the file byte position to start reading from.\n"
+ " If 'pos' is 0 or omitted, the file is read from the start.\n"
+ " All numeric parameters are assumed to be decimal,\n"
+ " unless specified otherwise using a leading \"0x\"."
+);
+
+int do_ls_wrapper(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ return do_ls(cmdtp, flag, argc, argv, FS_TYPE_ANY);
+}
+
+U_BOOT_CMD(
+ ls, 4, 1, do_ls_wrapper,
+ "list files in a directory (default /)",
+ "<interface> [<dev[:part]> [directory]]\n"
+ " - List files in directory 'directory' of partition 'part' on\n"
+ " device type 'interface' instance 'dev'."
+);
#include <common.h>
#include <command.h>
-int do_help(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+static int do_help(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- return _do_help(&__u_boot_cmd_start,
- &__u_boot_cmd_end - &__u_boot_cmd_start,
- cmdtp, flag, argc, argv);
+ cmd_tbl_t *start = ll_entry_start(cmd_tbl_t, cmd);
+ const int len = ll_entry_count(cmd_tbl_t, cmd);
+ return _do_help(start, len, cmdtp, flag, argc, argv);
}
U_BOOT_CMD(
);
/* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */
-cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = {
+ll_entry_declare(cmd_tbl_t, question_mark, cmd, cmd) = {
"?", CONFIG_SYS_MAXARGS, 1, do_help,
"alias for 'help'",
#ifdef CONFIG_SYS_LONGHELP
#define DISP_LINE_LEN 16
/* implement possible board specific board init */
-void __def_i2c_init_board(void)
+static void __def_i2c_init_board(void)
{
return;
}
__attribute__((weak, alias("__def_i2c_init_board")));
/* TODO: Implement architecture-specific get/set functions */
-unsigned int __def_i2c_get_bus_speed(void)
+static unsigned int __def_i2c_get_bus_speed(void)
{
return CONFIG_SYS_I2C_SPEED;
}
unsigned int i2c_get_bus_speed(void)
__attribute__((weak, alias("__def_i2c_get_bus_speed")));
-int __def_i2c_set_bus_speed(unsigned int speed)
+static int __def_i2c_set_bus_speed(unsigned int speed)
{
if (speed != CONFIG_SYS_I2C_SPEED)
return -1;
return 0;
}
+static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ u_char chip;
+ uint devaddr, alen, length;
+ u_char *memaddr;
+
+ if (argc != 5)
+ return cmd_usage(cmdtp);
+
+ /*
+ * memaddr is the address where to store things in memory
+ */
+ memaddr = (u_char *)simple_strtoul(argv[1], NULL, 16);
+
+ /*
+ * I2C chip address
+ */
+ chip = simple_strtoul(argv[2], NULL, 16);
+
+ /*
+ * I2C data address within the chip. This can be 1 or
+ * 2 bytes long. Some day it might be 3 bytes long :-).
+ */
+ devaddr = simple_strtoul(argv[3], NULL, 16);
+ alen = get_alen(argv[3]);
+ if (alen > 3)
+ return cmd_usage(cmdtp);
+
+ /*
+ * Length is the number of objects, not number of bytes.
+ */
+ length = simple_strtoul(argv[4], NULL, 16);
+
+ while (length-- > 0) {
+ if (i2c_write(chip, devaddr++, alen, memaddr++, 1) != 0) {
+ puts("Error writing to the chip.\n");
+ return 1;
+ }
+/*
+ * No write delay with FRAM devices.
+ */
+#if !defined(CONFIG_SYS_I2C_FRAM)
+ udelay(11000);
+#endif
+ }
+ return 0;
+}
+
/*
* Syntax:
* i2c md {i2c_chip} {addr}{.0, .1, .2} {len}
/*
* Syntax:
- * i2c probe {addr}{.0, .1, .2}
+ * i2c probe {addr}
+ *
+ * Returns zero (success) if one or more I2C devices was found
*/
static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int j;
+ int addr = -1;
+ int found = 0;
#if defined(CONFIG_SYS_I2C_NOPROBES)
int k, skip;
uchar bus = GET_BUS_NUM;
#endif /* NOPROBES */
+ if (argc == 2)
+ addr = simple_strtol(argv[1], 0, 16);
+
puts ("Valid chip addresses:");
for (j = 0; j < 128; j++) {
+ if ((0 <= addr) && (j != addr))
+ continue;
+
#if defined(CONFIG_SYS_I2C_NOPROBES)
skip = 0;
for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) {
if (skip)
continue;
#endif
- if (i2c_probe(j) == 0)
+ if (i2c_probe(j) == 0) {
printf(" %02X", j);
+ found++;
+ }
}
putc ('\n');
putc ('\n');
#endif
- return 0;
+ return (0 == found);
}
/*
U_BOOT_CMD_MKENT(nm, 2, 1, do_i2c_nm, "", ""),
U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""),
U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""),
+ U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""),
U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""),
#if defined(CONFIG_CMD_SDRAM)
U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""),
}
/***************************************************/
-
-U_BOOT_CMD(
- i2c, 6, 1, do_i2c,
- "I2C sub-system",
+#ifdef CONFIG_SYS_LONGHELP
+static char i2c_help_text[] =
#if defined(CONFIG_I2C_MUX)
"bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c "
#endif /* CONFIG_I2C_MUX */
"i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
- "i2c probe - show devices on the I2C bus\n"
+ "i2c probe [address] - test for and show device(s) on the I2C bus\n"
"i2c read chip address[.0, .1, .2] length memaddress - read to memory \n"
+ "i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n"
"i2c reset - re-init the I2C Controller\n"
#if defined(CONFIG_CMD_SDRAM)
"i2c sdram chip - print SDRAM configuration information\n"
#endif
- "i2c speed [speed] - show or set I2C bus speed"
+ "i2c speed [speed] - show or set I2C bus speed";
+#endif
+
+U_BOOT_CMD(
+ i2c, 6, 1, do_i2c,
+ "I2C sub-system",
+ i2c_help_text
);
#if defined(CONFIG_I2C_MUX)
# include <pcmcia.h>
#endif
-#ifdef CONFIG_8xx
-# include <mpc8xx.h>
-#endif
-
-#ifdef CONFIG_MPC5xxx
-#include <mpc5xxx.h>
-#endif
-
#include <ide.h>
#include <ata.h>
# include <status_led.h>
#endif
-#ifdef CONFIG_IDE_8xx_DIRECT
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
#ifdef __PPC__
# define EIEIO __asm__ volatile ("eieio")
# define SYNC __asm__ volatile ("sync")
# define SYNC /* nothing */
#endif
-#ifdef CONFIG_IDE_8xx_DIRECT
-/* Timings for IDE Interface
- *
- * SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk
- * 70 165 30 PIO-Mode 0, [ns]
- * 4 9 2 [Cycles]
- * 50 125 20 PIO-Mode 1, [ns]
- * 3 7 2 [Cycles]
- * 30 100 15 PIO-Mode 2, [ns]
- * 2 6 1 [Cycles]
- * 30 80 10 PIO-Mode 3, [ns]
- * 2 5 1 [Cycles]
- * 25 70 10 PIO-Mode 4, [ns]
- * 2 4 1 [Cycles]
- */
-
-const static pio_config_t pio_config_ns [IDE_MAX_PIO_MODE+1] =
-{
- /* Setup Length Hold */
- { 70, 165, 30 }, /* PIO-Mode 0, [ns] */
- { 50, 125, 20 }, /* PIO-Mode 1, [ns] */
- { 30, 101, 15 }, /* PIO-Mode 2, [ns] */
- { 30, 80, 10 }, /* PIO-Mode 3, [ns] */
- { 25, 70, 10 }, /* PIO-Mode 4, [ns] */
-};
-
-static pio_config_t pio_config_clk [IDE_MAX_PIO_MODE+1];
-
-#ifndef CONFIG_SYS_PIO_MODE
-#define CONFIG_SYS_PIO_MODE 0 /* use a relaxed default */
-#endif
-static int pio_mode = CONFIG_SYS_PIO_MODE;
-
-/* Make clock cycles and always round up */
-
-#define PCMCIA_MK_CLKS( t, T ) (( (t) * (T) + 999U ) / 1000U )
-
-#endif /* CONFIG_IDE_8xx_DIRECT */
-
/* ------------------------------------------------------------------------- */
/* Current I/O Device */
block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE];
/* ------------------------------------------------------------------------- */
-#ifdef CONFIG_IDE_LED
-# if !defined(CONFIG_BMS2003) && \
- !defined(CONFIG_CPC45) && \
- !defined(CONFIG_KUP4K) && \
- !defined(CONFIG_KUP4X)
-static void ide_led (uchar led, uchar status);
-#else
-extern void ide_led (uchar led, uchar status);
-#endif
-#else
-#define ide_led(a,b) /* dummy */
-#endif
-
#ifdef CONFIG_IDE_RESET
static void ide_reset (void);
#else
#define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */
-static void input_data(int dev, ulong *sect_buf, int words);
-static void output_data(int dev, const ulong *sect_buf, int words);
static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
#ifndef CONFIG_SYS_ATA_PORT_ADDR
#ifdef CONFIG_ATAPI
static void atapi_inquiry(block_dev_desc_t *dev_desc);
-ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer);
+static ulong atapi_read(int device, ulong blknr, lbaint_t blkcnt,
+ void *buffer);
#endif
-#ifdef CONFIG_IDE_8xx_DIRECT
-static void set_pcmcia_timing (int pmode);
-#endif
-
/* ------------------------------------------------------------------------- */
int do_ide(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
/* ------------------------------------------------------------------------- */
+void __ide_led(uchar led, uchar status)
+{
+#if defined(CONFIG_IDE_LED) && defined(PER8_BASE) /* required by LED_PORT */
+ static uchar led_buffer; /* Buffer for current LED status */
+
+ uchar *led_port = LED_PORT;
+
+ if (status) /* switch LED on */
+ led_buffer |= led;
+ else /* switch LED off */
+ led_buffer &= ~led;
+
+ *led_port = led_buffer;
+#endif
+}
+
+void ide_led(uchar led, uchar status)
+ __attribute__ ((weak, alias("__ide_led")));
+
+#ifndef CONFIG_IDE_LED /* define LED macros, they are not used anyways */
+# define DEVICE_LED(x) 0
+# define LED_IDE1 1
+# define LED_IDE2 2
+#endif
+
+/* ------------------------------------------------------------------------- */
+
inline void __ide_outb(int dev, int port, unsigned char val)
{
debug("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
void ide_init(void)
{
-
-#ifdef CONFIG_IDE_8xx_DIRECT
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
-#endif
unsigned char c;
int i, bus;
-#if defined(CONFIG_SC3)
- unsigned int ata_reset_time = ATA_RESET_TIME;
-#endif
#ifdef CONFIG_IDE_8xx_PCCARD
- extern int pcmcia_on(void);
extern int ide_devices_found; /* Initialized in check_ide_device() */
#endif /* CONFIG_IDE_8xx_PCCARD */
#ifdef CONFIG_IDE_PREINIT
- extern int ide_preinit(void);
-
WATCHDOG_RESET();
if (ide_preinit()) {
}
#endif /* CONFIG_IDE_PREINIT */
-#ifdef CONFIG_IDE_8xx_PCCARD
- extern int pcmcia_on(void);
- extern int ide_devices_found; /* Initialized in check_ide_device() */
-
WATCHDOG_RESET();
- ide_devices_found = 0;
- /* initialize the PCMCIA IDE adapter card */
- pcmcia_on();
- if (!ide_devices_found)
- return;
- udelay(1000000); /* 1 s */
-#endif /* CONFIG_IDE_8xx_PCCARD */
-
- WATCHDOG_RESET();
-
-#ifdef CONFIG_IDE_8xx_DIRECT
- /* Initialize PIO timing tables */
- for (i = 0; i <= IDE_MAX_PIO_MODE; ++i) {
- pio_config_clk[i].t_setup =
- PCMCIA_MK_CLKS(pio_config_ns[i].t_setup, gd->bus_clk);
- pio_config_clk[i].t_length =
- PCMCIA_MK_CLKS(pio_config_ns[i].t_length,
- gd->bus_clk);
- pio_config_clk[i].t_hold =
- PCMCIA_MK_CLKS(pio_config_ns[i].t_hold, gd->bus_clk);
- debug("PIO Mode %d: setup=%2d ns/%d clk" " len=%3d ns/%d clk"
- " hold=%2d ns/%d clk\n", i, pio_config_ns[i].t_setup,
- pio_config_clk[i].t_setup, pio_config_ns[i].t_length,
- pio_config_clk[i].t_length, pio_config_ns[i].t_hold,
- pio_config_clk[i].t_hold);
- }
-#endif /* CONFIG_IDE_8xx_DIRECT */
-
/*
* Reset the IDE just to be sure.
* Light LED's to show
/* ATAPI Drives seems to need a proper IDE Reset */
ide_reset();
-#ifdef CONFIG_IDE_8xx_DIRECT
- /* PCMCIA / IDE initialization for common mem space */
- pcmp->pcmc_pgcrb = 0;
+#ifdef CONFIG_IDE_INIT_POSTRESET
+ WATCHDOG_RESET();
- /* start in PIO mode 0 - most relaxed timings */
- pio_mode = 0;
- set_pcmcia_timing(pio_mode);
-#endif /* CONFIG_IDE_8xx_DIRECT */
+ if (ide_init_postreset()) {
+ puts("ide_preinit_postreset failed\n");
+ return;
+ }
+#endif /* CONFIG_IDE_INIT_POSTRESET */
/*
* Wait for IDE to get ready.
c = ide_inb(dev, ATA_STATUS);
i++;
-#if defined(CONFIG_SC3)
- if (i > (ata_reset_time * 100)) {
-#else
if (i > (ATA_RESET_TIME * 100)) {
-#endif
puts("** Timeout **\n");
/* LED's off */
ide_led((LED_IDE1 | LED_IDE2), 0);
curr_device = -1;
for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; ++i) {
-#ifdef CONFIG_IDE_LED
int led = (IDE_BUS(i) == 0) ? LED_IDE1 : LED_IDE2;
-#endif
ide_dev_desc[i].type = DEV_TYPE_UNKNOWN;
ide_dev_desc[i].if_type = IF_TYPE_IDE;
ide_dev_desc[i].dev = i;
}
#endif
+/* ------------------------------------------------------------------------- */
-#ifdef CONFIG_IDE_8xx_DIRECT
-
-static void set_pcmcia_timing(int pmode)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
- ulong timings;
-
- debug("Set timing for PIO Mode %d\n", pmode);
-
- timings = PCMCIA_SHT(pio_config_clk[pmode].t_hold)
- | PCMCIA_SST(pio_config_clk[pmode].t_setup)
- | PCMCIA_SL(pio_config_clk[pmode].t_length);
-
- /*
- * IDE 0
- */
- pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_PBR0;
- pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0
-#if (CONFIG_SYS_PCMCIA_POR0 != 0)
- | timings
-#endif
- ;
- debug("PBR0: %08x POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0);
-
- pcmp->pcmc_pbr1 = CONFIG_SYS_PCMCIA_PBR1;
- pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1
-#if (CONFIG_SYS_PCMCIA_POR1 != 0)
- | timings
-#endif
- ;
- debug("PBR1: %08x POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1);
-
- pcmp->pcmc_pbr2 = CONFIG_SYS_PCMCIA_PBR2;
- pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2
-#if (CONFIG_SYS_PCMCIA_POR2 != 0)
- | timings
-#endif
- ;
- debug("PBR2: %08x POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2);
-
- pcmp->pcmc_pbr3 = CONFIG_SYS_PCMCIA_PBR3;
- pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3
-#if (CONFIG_SYS_PCMCIA_POR3 != 0)
- | timings
-#endif
- ;
- debug("PBR3: %08x POR3: %08x\n", pcmp->pcmc_pbr3, pcmp->pcmc_por3);
-
- /*
- * IDE 1
- */
- pcmp->pcmc_pbr4 = CONFIG_SYS_PCMCIA_PBR4;
- pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4
-#if (CONFIG_SYS_PCMCIA_POR4 != 0)
- | timings
-#endif
- ;
- debug("PBR4: %08x POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4);
-
- pcmp->pcmc_pbr5 = CONFIG_SYS_PCMCIA_PBR5;
- pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5
-#if (CONFIG_SYS_PCMCIA_POR5 != 0)
- | timings
-#endif
- ;
- debug("PBR5: %08x POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5);
-
- pcmp->pcmc_pbr6 = CONFIG_SYS_PCMCIA_PBR6;
- pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6
-#if (CONFIG_SYS_PCMCIA_POR6 != 0)
- | timings
-#endif
- ;
- debug("PBR6: %08x POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6);
-
- pcmp->pcmc_pbr7 = CONFIG_SYS_PCMCIA_PBR7;
- pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7
-#if (CONFIG_SYS_PCMCIA_POR7 != 0)
- | timings
-#endif
- ;
- debug("PBR7: %08x POR7: %08x\n", pcmp->pcmc_pbr7, pcmp->pcmc_por7);
-
-}
+void ide_input_swap_data(int dev, ulong *sect_buf, int words)
+ __attribute__ ((weak, alias("__ide_input_swap_data")));
-#endif /* CONFIG_IDE_8xx_DIRECT */
+void ide_input_data(int dev, ulong *sect_buf, int words)
+ __attribute__ ((weak, alias("__ide_input_data")));
-/* ------------------------------------------------------------------------- */
+void ide_output_data(int dev, const ulong *sect_buf, int words)
+ __attribute__ ((weak, alias("__ide_output_data")));
/* We only need to swap data if we are running on a big endian cpu. */
-/* But Au1x00 cpu:s already swaps data in big endian mode! */
-#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SOC_AU1X00)
-#define input_swap_data(x,y,z) input_data(x,y,z)
-#else
-static void input_swap_data(int dev, ulong *sect_buf, int words)
+#if defined(__LITTLE_ENDIAN)
+void __ide_input_swap_data(int dev, ulong *sect_buf, int words)
{
-#if defined(CONFIG_CPC45)
- uchar i;
- volatile uchar *pbuf_even =
- (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
- volatile uchar *pbuf_odd =
- (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
- ushort *dbuf = (ushort *) sect_buf;
-
- while (words--) {
- for (i = 0; i < 2; i++) {
- *(((uchar *) (dbuf)) + 1) = *pbuf_even;
- *(uchar *) dbuf = *pbuf_odd;
- dbuf += 1;
- }
- }
+ ide_input_data(dev, sect_buf, words);
+}
#else
+void __ide_input_swap_data(int dev, ulong *sect_buf, int words)
+{
volatile ushort *pbuf =
(ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
ushort *dbuf = (ushort *) sect_buf;
#ifdef __MIPS__
*dbuf++ = swab16p((u16 *) pbuf);
*dbuf++ = swab16p((u16 *) pbuf);
-#elif defined(CONFIG_PCS440EP)
- *dbuf++ = *pbuf;
- *dbuf++ = *pbuf;
#else
*dbuf++ = ld_le16(pbuf);
*dbuf++ = ld_le16(pbuf);
#endif /* !MIPS */
}
-#endif
}
-#endif /* __LITTLE_ENDIAN || CONFIG_AU1X00 */
+#endif /* __LITTLE_ENDIAN */
#if defined(CONFIG_IDE_SWAP_IO)
-static void output_data(int dev, const ulong *sect_buf, int words)
+void __ide_output_data(int dev, const ulong *sect_buf, int words)
{
-#if defined(CONFIG_CPC45)
- uchar *dbuf;
- volatile uchar *pbuf_even;
- volatile uchar *pbuf_odd;
-
- pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
- pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
- dbuf = (uchar *) sect_buf;
- while (words--) {
- EIEIO;
- *pbuf_even = *dbuf++;
- EIEIO;
- *pbuf_odd = *dbuf++;
- EIEIO;
- *pbuf_even = *dbuf++;
- EIEIO;
- *pbuf_odd = *dbuf++;
- }
-#else
ushort *dbuf;
volatile ushort *pbuf;
pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
dbuf = (ushort *) sect_buf;
while (words--) {
-#if defined(CONFIG_PCS440EP)
- /* not tested, because CF was write protected */
- EIEIO;
- *pbuf = ld_le16(dbuf++);
- EIEIO;
- *pbuf = ld_le16(dbuf++);
-#else
EIEIO;
*pbuf = *dbuf++;
EIEIO;
*pbuf = *dbuf++;
-#endif
}
-#endif
}
#else /* ! CONFIG_IDE_SWAP_IO */
-static void output_data(int dev, const ulong *sect_buf, int words)
+void __ide_output_data(int dev, const ulong *sect_buf, int words)
{
#if defined(CONFIG_IDE_AHB)
ide_write_data(dev, sect_buf, words);
#endif /* CONFIG_IDE_SWAP_IO */
#if defined(CONFIG_IDE_SWAP_IO)
-static void input_data(int dev, ulong *sect_buf, int words)
+void __ide_input_data(int dev, ulong *sect_buf, int words)
{
-#if defined(CONFIG_CPC45)
- uchar *dbuf;
- volatile uchar *pbuf_even;
- volatile uchar *pbuf_odd;
-
- pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
- pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
- dbuf = (uchar *) sect_buf;
- while (words--) {
- *dbuf++ = *pbuf_even;
- EIEIO;
- SYNC;
- *dbuf++ = *pbuf_odd;
- EIEIO;
- SYNC;
- *dbuf++ = *pbuf_even;
- EIEIO;
- SYNC;
- *dbuf++ = *pbuf_odd;
- EIEIO;
- SYNC;
- }
-#else
ushort *dbuf;
volatile ushort *pbuf;
debug("in input data base for read is %lx\n", (unsigned long) pbuf);
while (words--) {
-#if defined(CONFIG_PCS440EP)
- EIEIO;
- *dbuf++ = ld_le16(pbuf);
- EIEIO;
- *dbuf++ = ld_le16(pbuf);
-#else
EIEIO;
*dbuf++ = *pbuf;
EIEIO;
*dbuf++ = *pbuf;
-#endif
}
-#endif
}
#else /* ! CONFIG_IDE_SWAP_IO */
-static void input_data(int dev, ulong *sect_buf, int words)
+void __ide_input_data(int dev, ulong *sect_buf, int words)
{
#if defined(CONFIG_IDE_AHB)
ide_read_data(dev, sect_buf, words);
return;
#endif
- input_swap_data(device, (ulong *)&iop, ATA_SECTORWORDS);
+ ide_input_swap_data(device, (ulong *)&iop, ATA_SECTORWORDS);
ident_cpy((unsigned char *) dev_desc->revision, iop.fw_rev,
sizeof(dev_desc->revision));
/* ------------------------------------------------------------------------- */
-ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer)
+ulong ide_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer)
{
ulong n = 0;
unsigned char c;
lba48 = 1;
}
#endif
- debug("ide_read dev %d start %lX, blocks %lX buffer at %lX\n",
+ debug("ide_read dev %d start %lX, blocks " LBAF " buffer at %lX\n",
device, blknr, blkcnt, (ulong) buffer);
ide_led(DEVICE_LED(device), 1); /* LED on */
if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) !=
ATA_STAT_DRQ) {
-#if defined(CONFIG_SYS_64BIT_LBA)
- printf("Error (no IRQ) dev %d blk %lld: status 0x%02x\n",
+ printf("Error (no IRQ) dev %d blk %ld: status %#02x\n",
device, blknr, c);
-#else
- printf("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
- device, (ulong) blknr, c);
-#endif
break;
}
- input_data(device, buffer, ATA_SECTORWORDS);
+ ide_input_data(device, buffer, ATA_SECTORWORDS);
(void) ide_inb(device, ATA_STATUS); /* clear IRQ */
++n;
/* ------------------------------------------------------------------------- */
-ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, const void *buffer)
+ulong ide_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer)
{
ulong n = 0;
unsigned char c;
if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) !=
ATA_STAT_DRQ) {
-#if defined(CONFIG_SYS_64BIT_LBA)
- printf("Error (no IRQ) dev %d blk %lld: status 0x%02x\n",
+ printf("Error (no IRQ) dev %d blk %ld: status %#02x\n",
device, blknr, c);
-#else
- printf("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
- device, (ulong) blknr, c);
-#endif
goto WR_OUT;
}
- output_data(device, buffer, ATA_SECTORWORDS);
+ ide_output_data(device, buffer, ATA_SECTORWORDS);
c = ide_inb(device, ATA_STATUS); /* clear IRQ */
++n;
++blknr;
static void ide_reset(void)
{
-#if defined(CONFIG_SYS_PB_12V_ENABLE) || defined(CONFIG_SYS_PB_IDE_MOTOR)
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-#endif
int i;
curr_device = -1;
WATCHDOG_RESET();
-#ifdef CONFIG_SYS_PB_12V_ENABLE
- /* 12V Enable output OFF */
- immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_12V_ENABLE);
-
- immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_12V_ENABLE);
- immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_12V_ENABLE);
- immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_12V_ENABLE;
-
- /* wait 500 ms for the voltage to stabilize */
- for (i = 0; i < 500; ++i)
- udelay(1000);
-
- /* 12V Enable output ON */
- immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_12V_ENABLE;
-#endif /* CONFIG_SYS_PB_12V_ENABLE */
-
-#ifdef CONFIG_SYS_PB_IDE_MOTOR
- /* configure IDE Motor voltage monitor pin as input */
- immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_IDE_MOTOR);
- immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_IDE_MOTOR);
- immr->im_cpm.cp_pbdir &= ~(CONFIG_SYS_PB_IDE_MOTOR);
-
- /* wait up to 1 s for the motor voltage to stabilize */
- for (i = 0; i < 1000; ++i) {
- if ((immr->im_cpm.cp_pbdat & CONFIG_SYS_PB_IDE_MOTOR) != 0) {
- break;
- }
- udelay(1000);
- }
-
- if (i == 1000) { /* Timeout */
- printf("\nWarning: 5V for IDE Motor missing\n");
-#ifdef CONFIG_STATUS_LED
-#ifdef STATUS_LED_YELLOW
- status_led_set(STATUS_LED_YELLOW, STATUS_LED_ON);
-#endif
-#ifdef STATUS_LED_GREEN
- status_led_set(STATUS_LED_GREEN, STATUS_LED_OFF);
-#endif
-#endif /* CONFIG_STATUS_LED */
- }
-#endif /* CONFIG_SYS_PB_IDE_MOTOR */
-
- WATCHDOG_RESET();
-
/* de-assert RESET signal */
ide_set_reset(0);
/* ------------------------------------------------------------------------- */
-#if defined(CONFIG_IDE_LED) && \
- !defined(CONFIG_CPC45) && \
- !defined(CONFIG_KUP4K) && \
- !defined(CONFIG_KUP4X)
-
-static uchar led_buffer; /* Buffer for current LED status */
-
-static void ide_led(uchar led, uchar status)
-{
- uchar *led_port = LED_PORT;
-
- if (status) /* switch LED on */
- led_buffer |= led;
- else /* switch LED off */
- led_buffer &= ~led;
-
- *led_port = led_buffer;
-}
-
-#endif /* CONFIG_IDE_LED */
-
#if defined(CONFIG_OF_IDE_FIXUP)
int ide_device_present(int dev)
{
* ATAPI Support
*/
+void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
+ __attribute__ ((weak, alias("__ide_input_data_shorts")));
+
+void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
+ __attribute__ ((weak, alias("__ide_output_data_shorts")));
+
+
#if defined(CONFIG_IDE_SWAP_IO)
/* since ATAPI may use commands with not 4 bytes alligned length
* we have our own transfer functions, 2 bytes alligned */
-static void output_data_shorts(int dev, ushort *sect_buf, int shorts)
+void __ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
{
-#if defined(CONFIG_CPC45)
- uchar *dbuf;
- volatile uchar *pbuf_even;
- volatile uchar *pbuf_odd;
-
- pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
- pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
- while (shorts--) {
- EIEIO;
- *pbuf_even = *dbuf++;
- EIEIO;
- *pbuf_odd = *dbuf++;
- }
-#else
ushort *dbuf;
volatile ushort *pbuf;
EIEIO;
*pbuf = *dbuf++;
}
-#endif
}
-static void input_data_shorts(int dev, ushort *sect_buf, int shorts)
+void __ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
{
-#if defined(CONFIG_CPC45)
- uchar *dbuf;
- volatile uchar *pbuf_even;
- volatile uchar *pbuf_odd;
-
- pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
- pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
- while (shorts--) {
- EIEIO;
- *dbuf++ = *pbuf_even;
- EIEIO;
- *dbuf++ = *pbuf_odd;
- }
-#else
ushort *dbuf;
volatile ushort *pbuf;
EIEIO;
*dbuf++ = *pbuf;
}
-#endif
}
#else /* ! CONFIG_IDE_SWAP_IO */
-static void output_data_shorts(int dev, ushort *sect_buf, int shorts)
+void __ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
{
outsw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, shorts);
}
-static void input_data_shorts(int dev, ushort *sect_buf, int shorts)
+void __ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
{
insw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, shorts);
}
}
/* write command block */
- output_data_shorts(device, (unsigned short *) ccb, ccblen / 2);
+ ide_output_data_shorts(device, (unsigned short *) ccb, ccblen / 2);
/* ATAPI Command written wait for completition */
udelay(5000); /* device must set bsy */
/* ok now decide if it is an in or output */
if ((ide_inb(device, ATA_SECT_CNT) & 0x02) == 0) {
debug("Write to device\n");
- output_data_shorts(device, (unsigned short *) buffer,
- n);
+ ide_output_data_shorts(device,
+ (unsigned short *) buffer, n);
} else {
debug("Read from device @ %p shorts %d\n", buffer, n);
- input_data_shorts(device, (unsigned short *) buffer,
- n);
+ ide_input_data_shorts(device,
+ (unsigned short *) buffer, n);
}
}
udelay(5000); /* seems that some CD ROMs need this... */
#define ATAPI_READ_BLOCK_SIZE 2048 /* assuming CD part */
#define ATAPI_READ_MAX_BLOCK (ATAPI_READ_MAX_BYTES/ATAPI_READ_BLOCK_SIZE)
-ulong atapi_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer)
+ulong atapi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer)
{
ulong n = 0;
unsigned char ccb[12]; /* Command descriptor block */
ulong cnt;
- debug("atapi_read dev %d start %lX, blocks %lX buffer at %lX\n",
+ debug("atapi_read dev %d start %lX, blocks " LBAF " buffer at %lX\n",
device, blknr, blkcnt, (ulong) buffer);
do {
#include <config.h>
#include <command.h>
-int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
if (argc != 2)
return (0);
}
-int binary_test (char *op, char *arg1, char *arg2, int w)
+static int binary_test(char *op, char *arg1, char *arg2, int w)
{
int len, i;
const op_tbl_t *optp;
}
/* command line interface to the shell test */
-int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] )
+static int do_itest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int value, w;
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CMD_LOADB)
-static ulong load_serial_ymodem (ulong offset);
+static ulong load_serial_ymodem(ulong offset);
#endif
#if defined(CONFIG_CMD_LOADS)
-static ulong load_serial (long offset);
-static int read_record (char *buf, ulong len);
+static ulong load_serial(long offset);
+static int read_record(char *buf, ulong len);
# if defined(CONFIG_CMD_SAVES)
-static int save_serial (ulong offset, ulong size);
-static int write_record (char *buf);
+static int save_serial(ulong offset, ulong size);
+static int write_record(char *buf);
#endif
static int do_echo = 1;
/* -------------------------------------------------------------------- */
#if defined(CONFIG_CMD_LOADS)
-int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_load_serial(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
long offset = 0;
ulong addr;
load_baudrate = current_baudrate;
}
if (load_baudrate != current_baudrate) {
- printf ("## Switch baudrate to %d bps and press ENTER ...\n",
+ printf("## Switch baudrate to %d bps and press ENTER ...\n",
load_baudrate);
udelay(50000);
gd->baudrate = load_baudrate;
- serial_setbrg ();
+ serial_setbrg();
udelay(50000);
for (;;) {
if (getc() == '\r')
}
#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
- printf ("## Ready for S-Record download ...\n");
+ printf("## Ready for S-Record download ...\n");
- addr = load_serial (offset);
+ addr = load_serial(offset);
/*
* Gather any trailing characters (for instance, the ^D which
}
if (addr == ~0) {
- printf ("## S-Record download aborted\n");
+ printf("## S-Record download aborted\n");
rcode = 1;
} else {
- printf ("## Start Addr = 0x%08lX\n", addr);
+ printf("## Start Addr = 0x%08lX\n", addr);
load_addr = addr;
}
#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
if (load_baudrate != current_baudrate) {
- printf ("## Switch baudrate to %d bps and press ESC ...\n",
+ printf("## Switch baudrate to %d bps and press ESC ...\n",
current_baudrate);
- udelay (50000);
+ udelay(50000);
gd->baudrate = current_baudrate;
- serial_setbrg ();
- udelay (50000);
+ serial_setbrg();
+ udelay(50000);
for (;;) {
if (getc() == 0x1B) /* ESC */
break;
return rcode;
}
-static ulong
-load_serial (long offset)
+static ulong load_serial(long offset)
{
char record[SREC_MAXRECLEN + 1]; /* buffer for one S-Record */
char binbuf[SREC_MAXBINLEN]; /* buffer for binary data */
int line_count = 0;
while (read_record(record, SREC_MAXRECLEN + 1) >= 0) {
- type = srec_decode (record, &binlen, &addr, binbuf);
+ type = srec_decode(record, &binlen, &addr, binbuf);
if (type < 0) {
return (~0); /* Invalid S-Record */
rc = flash_write((char *)binbuf,store_addr,binlen);
if (rc != 0) {
- flash_perror (rc);
+ flash_perror(rc);
return (~0);
}
} else
#endif
{
- memcpy ((char *)(store_addr), binbuf, binlen);
+ memcpy((char *)(store_addr), binbuf, binlen);
}
if ((store_addr) < start_addr)
start_addr = store_addr;
case SREC_END2:
case SREC_END3:
case SREC_END4:
- udelay (10000);
+ udelay(10000);
size = end_addr - start_addr + 1;
- printf ("\n"
+ printf("\n"
"## First Load Addr = 0x%08lX\n"
"## Last Load Addr = 0x%08lX\n"
"## Total Size = 0x%08lX = %ld Bytes\n",
start_addr, end_addr, size, size
);
- flush_cache (start_addr, size);
+ flush_cache(start_addr, size);
sprintf(buf, "%lX", size);
setenv("filesize", buf);
return (addr);
}
if (!do_echo) { /* print a '.' every 100 lines */
if ((++line_count % 100) == 0)
- putc ('.');
+ putc('.');
}
}
return (~0); /* Download aborted */
}
-static int
-read_record (char *buf, ulong len)
+static int read_record(char *buf, ulong len)
{
char *p;
char c;
for (p=buf; p < buf+len; ++p) {
c = getc(); /* read character */
if (do_echo)
- putc (c); /* ... and echo it */
+ putc(c); /* ... and echo it */
switch (c) {
case '\r':
save_baudrate = current_baudrate;
}
if (save_baudrate != current_baudrate) {
- printf ("## Switch baudrate to %d bps and press ENTER ...\n",
+ printf("## Switch baudrate to %d bps and press ENTER ...\n",
save_baudrate);
udelay(50000);
gd->baudrate = save_baudrate;
- serial_setbrg ();
+ serial_setbrg();
udelay(50000);
for (;;) {
if (getc() == '\r')
}
#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
- printf ("## Ready for S-Record upload, press ENTER to proceed ...\n");
+ printf("## Ready for S-Record upload, press ENTER to proceed ...\n");
for (;;) {
if (getc() == '\r')
break;
}
- if(save_serial (offset, size)) {
- printf ("## S-Record upload aborted\n");
+ if (save_serial(offset, size)) {
+ printf("## S-Record upload aborted\n");
} else {
- printf ("## S-Record upload complete\n");
+ printf("## S-Record upload complete\n");
}
#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
if (save_baudrate != current_baudrate) {
- printf ("## Switch baudrate to %d bps and press ESC ...\n",
+ printf("## Switch baudrate to %d bps and press ESC ...\n",
(int)current_baudrate);
- udelay (50000);
+ udelay(50000);
gd->baudrate = current_baudrate;
- serial_setbrg ();
- udelay (50000);
+ serial_setbrg();
+ udelay(50000);
for (;;) {
if (getc() == 0x1B) /* ESC */
break;
#define SREC3_END "S70500000000FA\n"
#define SREC_BYTES_PER_RECORD 16
-static int save_serial (ulong address, ulong count)
+static int save_serial(ulong address, ulong count)
{
int i, c, reclen, checksum, length;
char *hex = "0123456789ABCDEF";
return(0);
}
-static int
-write_record (char *buf)
+static int write_record(char *buf)
{
char c;
static void set_kerm_bin_mode(unsigned long *);
static int k_recv(void);
-static ulong load_serial_bin (ulong offset);
+static ulong load_serial_bin(ulong offset);
-char his_eol; /* character he needs at end of packet */
-int his_pad_count; /* number of pad chars he needs */
-char his_pad_char; /* pad chars he needs */
-char his_quote; /* quote chars he'll use */
+static char his_eol; /* character he needs at end of packet */
+static int his_pad_count; /* number of pad chars he needs */
+static char his_pad_char; /* pad chars he needs */
+static char his_quote; /* quote chars he'll use */
-int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_load_serial_bin(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
ulong offset = 0;
ulong addr;
}
if (load_baudrate != current_baudrate) {
- printf ("## Switch baudrate to %d bps and press ENTER ...\n",
+ printf("## Switch baudrate to %d bps and press ENTER ...\n",
load_baudrate);
udelay(50000);
gd->baudrate = load_baudrate;
- serial_setbrg ();
+ serial_setbrg();
udelay(50000);
for (;;) {
if (getc() == '\r')
}
if (strcmp(argv[0],"loady")==0) {
- printf ("## Ready for binary (ymodem) download "
+ printf("## Ready for binary (ymodem) download "
"to 0x%08lX at %d bps...\n",
offset,
load_baudrate);
- addr = load_serial_ymodem (offset);
+ addr = load_serial_ymodem(offset);
} else {
- printf ("## Ready for binary (kermit) download "
+ printf("## Ready for binary (kermit) download "
"to 0x%08lX at %d bps...\n",
offset,
load_baudrate);
- addr = load_serial_bin (offset);
+ addr = load_serial_bin(offset);
if (addr == ~0) {
load_addr = 0;
- printf ("## Binary (kermit) download aborted\n");
+ printf("## Binary (kermit) download aborted\n");
rcode = 1;
} else {
- printf ("## Start Addr = 0x%08lX\n", addr);
+ printf("## Start Addr = 0x%08lX\n", addr);
load_addr = addr;
}
}
if (load_baudrate != current_baudrate) {
- printf ("## Switch baudrate to %d bps and press ESC ...\n",
+ printf("## Switch baudrate to %d bps and press ESC ...\n",
current_baudrate);
- udelay (50000);
+ udelay(50000);
gd->baudrate = current_baudrate;
- serial_setbrg ();
- udelay (50000);
+ serial_setbrg();
+ udelay(50000);
for (;;) {
if (getc() == 0x1B) /* ESC */
break;
}
-static ulong load_serial_bin (ulong offset)
+static ulong load_serial_bin(ulong offset)
{
int size, i;
char buf[32];
- set_kerm_bin_mode ((ulong *) offset);
- size = k_recv ();
+ set_kerm_bin_mode((ulong *) offset);
+ size = k_recv();
/*
* Gather any trailing characters (for instance, the ^D which
udelay(1000);
}
- flush_cache (offset, size);
+ flush_cache(offset, size);
printf("## Total Size = 0x%08x = %d Bytes\n", size, size);
sprintf(buf, "%X", size);
return offset;
}
-void send_pad (void)
+static void send_pad(void)
{
int count = his_pad_count;
while (count-- > 0)
- putc (his_pad_char);
+ putc(his_pad_char);
}
/* converts escaped kermit char to binary char */
-char ktrans (char in)
+static char ktrans(char in)
{
if ((in & 0x60) == 0x40) {
return (char) (in & ~0x40);
return in;
}
-int chk1 (char *buffer)
+static int chk1(char *buffer)
{
int total = 0;
return (int) ((total + ((total >> 6) & 0x03)) & 0x3f);
}
-void s1_sendpacket (char *packet)
+static void s1_sendpacket(char *packet)
{
- send_pad ();
+ send_pad();
while (*packet) {
- putc (*packet++);
+ putc(*packet++);
}
}
static char a_b[24];
-void send_ack (int n)
+static void send_ack(int n)
{
a_b[0] = START_CHAR;
- a_b[1] = tochar (3);
- a_b[2] = tochar (n);
+ a_b[1] = tochar(3);
+ a_b[2] = tochar(n);
a_b[3] = ACK_TYPE;
a_b[4] = '\0';
- a_b[4] = tochar (chk1 (&a_b[1]));
+ a_b[4] = tochar(chk1(&a_b[1]));
a_b[5] = his_eol;
a_b[6] = '\0';
- s1_sendpacket (a_b);
+ s1_sendpacket(a_b);
}
-void send_nack (int n)
+static void send_nack(int n)
{
a_b[0] = START_CHAR;
- a_b[1] = tochar (3);
- a_b[2] = tochar (n);
+ a_b[1] = tochar(3);
+ a_b[2] = tochar(n);
a_b[3] = NACK_TYPE;
a_b[4] = '\0';
- a_b[4] = tochar (chk1 (&a_b[1]));
+ a_b[4] = tochar(chk1(&a_b[1]));
a_b[5] = his_eol;
a_b[6] = '\0';
- s1_sendpacket (a_b);
+ s1_sendpacket(a_b);
}
-void (*os_data_init) (void);
-void (*os_data_char) (char new_char);
+static void (*os_data_init)(void);
+static void (*os_data_char)(char new_char);
static int os_data_state, os_data_state_saved;
static char *os_data_addr, *os_data_addr_saved;
static char *bin_start_address;
-static void bin_data_init (void)
+static void bin_data_init(void)
{
os_data_state = 0;
os_data_addr = bin_start_address;
}
-static void os_data_save (void)
+static void os_data_save(void)
{
os_data_state_saved = os_data_state;
os_data_addr_saved = os_data_addr;
}
-static void os_data_restore (void)
+static void os_data_restore(void)
{
os_data_state = os_data_state_saved;
os_data_addr = os_data_addr_saved;
}
-static void bin_data_char (char new_char)
+static void bin_data_char(char new_char)
{
switch (os_data_state) {
case 0: /* data */
}
}
-static void set_kerm_bin_mode (unsigned long *addr)
+static void set_kerm_bin_mode(unsigned long *addr)
{
bin_start_address = (char *) addr;
os_data_init = bin_data_init;
/* k_data_* simply handles the kermit escape translations */
static int k_data_escape, k_data_escape_saved;
-void k_data_init (void)
+static void k_data_init(void)
{
k_data_escape = 0;
- os_data_init ();
+ os_data_init();
}
-void k_data_save (void)
+static void k_data_save(void)
{
k_data_escape_saved = k_data_escape;
- os_data_save ();
+ os_data_save();
}
-void k_data_restore (void)
+static void k_data_restore(void)
{
k_data_escape = k_data_escape_saved;
- os_data_restore ();
+ os_data_restore();
}
-void k_data_char (char new_char)
+static void k_data_char(char new_char)
{
if (k_data_escape) {
/* last char was escape - translate this character */
- os_data_char (ktrans (new_char));
+ os_data_char(ktrans(new_char));
k_data_escape = 0;
} else {
if (new_char == his_quote) {
k_data_escape = 1;
} else {
/* otherwise send this char as-is */
- os_data_char (new_char);
+ os_data_char(new_char);
}
}
}
#define SEND_DATA_SIZE 20
-char send_parms[SEND_DATA_SIZE];
-char *send_ptr;
+static char send_parms[SEND_DATA_SIZE];
+static char *send_ptr;
/* handle_send_packet interprits the protocol info and builds and
sends an appropriate ack for what we can do */
-void handle_send_packet (int n)
+static void handle_send_packet(int n)
{
int length = 3;
int bytes;
break;
/* handle MAXL - max length */
/* ignore what he says - most I'll take (here) is 94 */
- a_b[++length] = tochar (94);
+ a_b[++length] = tochar(94);
if (bytes-- <= 0)
break;
/* handle TIME - time you should wait for my packets */
/* ignore what he says - don't wait for my ack longer than 1 second */
- a_b[++length] = tochar (1);
+ a_b[++length] = tochar(1);
if (bytes-- <= 0)
break;
/* handle NPAD - number of pad chars I need */
/* remember what he says - I need none */
- his_pad_count = untochar (send_parms[2]);
- a_b[++length] = tochar (0);
+ his_pad_count = untochar(send_parms[2]);
+ a_b[++length] = tochar(0);
if (bytes-- <= 0)
break;
/* handle PADC - pad chars I need */
/* remember what he says - I need none */
- his_pad_char = ktrans (send_parms[3]);
+ his_pad_char = ktrans(send_parms[3]);
a_b[++length] = 0x40; /* He should ignore this */
if (bytes-- <= 0)
break;
/* handle EOL - end of line he needs */
/* remember what he says - I need CR */
- his_eol = untochar (send_parms[4]);
- a_b[++length] = tochar (END_CHAR);
+ his_eol = untochar(send_parms[4]);
+ a_b[++length] = tochar(END_CHAR);
if (bytes-- <= 0)
break;
/* handle QCTL - quote control char he'll use */
break;
/* handle CAPAS - the capabilities mask */
/* ignore what he says - I only do long packets - I don't do windows */
- a_b[++length] = tochar (2); /* only long packets */
- a_b[++length] = tochar (0); /* no windows */
- a_b[++length] = tochar (94); /* large packet msb */
- a_b[++length] = tochar (94); /* large packet lsb */
+ a_b[++length] = tochar(2); /* only long packets */
+ a_b[++length] = tochar(0); /* no windows */
+ a_b[++length] = tochar(94); /* large packet msb */
+ a_b[++length] = tochar(94); /* large packet lsb */
} while (0);
a_b[0] = START_CHAR;
- a_b[1] = tochar (length);
- a_b[2] = tochar (n);
+ a_b[1] = tochar(length);
+ a_b[2] = tochar(n);
a_b[3] = ACK_TYPE;
a_b[++length] = '\0';
- a_b[length] = tochar (chk1 (&a_b[1]));
+ a_b[length] = tochar(chk1(&a_b[1]));
a_b[++length] = his_eol;
a_b[++length] = '\0';
- s1_sendpacket (a_b);
+ s1_sendpacket(a_b);
}
/* k_recv receives a OS Open image file over kermit line */
-static int k_recv (void)
+static int k_recv(void)
{
char new_char;
char k_state, k_state_saved;
/* initialize the k_recv and k_data state machine */
done = 0;
k_state = 0;
- k_data_init ();
+ k_data_init();
k_state_saved = k_state;
- k_data_save ();
+ k_data_save();
n = 0; /* just to get rid of a warning */
last_n = -1;
START:
/* get length of packet */
sum = 0;
- new_char = getc ();
+ new_char = getc();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
- length = untochar (new_char);
+ length = untochar(new_char);
/* get sequence number */
- new_char = getc ();
+ new_char = getc();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
- n = untochar (new_char);
+ n = untochar(new_char);
--length;
/* NEW CODE - check sequence numbers for retried packets */
if (n == last_n) {
/* same sequence number, restore the previous state */
k_state = k_state_saved;
- k_data_restore ();
+ k_data_restore();
} else {
/* new sequence number, checkpoint the download */
last_n = n;
k_state_saved = k_state;
- k_data_save ();
+ k_data_save();
}
/* END NEW CODE */
/* get packet type */
- new_char = getc ();
+ new_char = getc();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
if (length == -2) {
/* (length byte was 0, decremented twice) */
/* get the two length bytes */
- new_char = getc ();
+ new_char = getc();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
- len_hi = untochar (new_char);
- new_char = getc ();
+ len_hi = untochar(new_char);
+ new_char = getc();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
- len_lo = untochar (new_char);
+ len_lo = untochar(new_char);
length = len_hi * 95 + len_lo;
/* check header checksum */
- new_char = getc ();
+ new_char = getc();
if ((new_char & 0xE0) == 0)
goto packet_error;
- if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f))
+ if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f))
goto packet_error;
sum += new_char & 0xff;
/* --length; */ /* new length includes only data and block check to come */
}
/* bring in rest of packet */
while (length > 1) {
- new_char = getc ();
+ new_char = getc();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
}
}
/* get and validate checksum character */
- new_char = getc ();
+ new_char = getc();
if ((new_char & 0xE0) == 0)
goto packet_error;
- if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f))
+ if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f))
goto packet_error;
/* get END_CHAR */
- new_char = getc ();
+ new_char = getc();
if (new_char != END_CHAR) {
packet_error:
/* restore state machines */
k_state = k_state_saved;
- k_data_restore ();
+ k_data_restore();
/* send a negative acknowledge packet in */
- send_nack (n);
+ send_nack(n);
} else if (k_state == SEND_TYPE) {
/* crack the protocol parms, build an appropriate ack packet */
- handle_send_packet (n);
+ handle_send_packet(n);
} else {
/* send simple acknowledge packet in */
- send_ack (n);
+ send_ack(n);
/* quit if end of transmission */
if (k_state == BREAK_TYPE)
done = 1;
return (getc());
return -1;
}
-static ulong load_serial_ymodem (ulong offset)
+static ulong load_serial_ymodem(ulong offset)
{
int size;
char buf[32];
size = 0;
info.mode = xyzModem_ymodem;
- res = xyzModem_stream_open (&info, &err);
+ res = xyzModem_stream_open(&info, &err);
if (!res) {
while ((res =
- xyzModem_stream_read (ymodemBuf, 1024, &err)) > 0) {
+ xyzModem_stream_read(ymodemBuf, 1024, &err)) > 0) {
store_addr = addr + offset;
size += res;
addr += res;
#ifndef CONFIG_SYS_NO_FLASH
- if (addr2info (store_addr)) {
+ if (addr2info(store_addr)) {
int rc;
- rc = flash_write ((char *) ymodemBuf,
+ rc = flash_write((char *) ymodemBuf,
store_addr, res);
if (rc != 0) {
flash_perror (rc);
} else
#endif
{
- memcpy ((char *) (store_addr), ymodemBuf,
+ memcpy((char *)(store_addr), ymodemBuf,
res);
}
}
} else {
- printf ("%s\n", xyzModem_error (err));
+ printf("%s\n", xyzModem_error(err));
}
- xyzModem_stream_close (&err);
- xyzModem_stream_terminate (false, &getcxmodem);
+ xyzModem_stream_close(&err);
+ xyzModem_stream_terminate(false, &getcxmodem);
- flush_cache (offset, size);
+ flush_cache(offset, size);
- printf ("## Total Size = 0x%08x = %d Bytes\n", size, size);
- sprintf (buf, "%X", size);
- setenv ("filesize", buf);
+ printf("## Total Size = 0x%08x = %d Bytes\n", size, size);
+ sprintf(buf, "%X", size);
+ setenv("filesize", buf);
return offset;
}
/* -------------------------------------------------------------------- */
#if defined(CONFIG_CMD_HWFLOW)
-int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_hwflow(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
extern int hwflow_onoff(int);
return 0;
}
-int mdio_write_ranges(struct mii_dev *bus, int addrlo,
- int addrhi, int devadlo, int devadhi,
- int reglo, int reghi, unsigned short data)
+static int mdio_write_ranges(struct mii_dev *bus, int addrlo,
+ int addrhi, int devadlo, int devadhi,
+ int reglo, int reghi, unsigned short data)
{
int addr, devad, reg;
int err = 0;
return err;
}
-int mdio_read_ranges(struct mii_dev *bus, int addrlo,
- int addrhi, int devadlo, int devadhi,
- int reglo, int reghi)
+static int mdio_read_ranges(struct mii_dev *bus, int addrlo,
+ int addrhi, int devadlo, int devadhi,
+ int reglo, int reghi)
{
int addr, devad, reg;
}
/* The register will be in the form [a[-b].]x[-y] */
-int extract_reg_range(char *input, int *devadlo, int *devadhi,
- int *reglo, int *reghi)
+static int extract_reg_range(char *input, int *devadlo, int *devadhi,
+ int *reglo, int *reghi)
{
char *regstr;
return extract_range(regstr, reglo, reghi);
}
-int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus,
- int *addrlo, int *addrhi)
+static int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus,
+ int *addrlo, int *addrhi)
{
struct phy_device *phydev;
* md{.b, .w, .l} {addr} {len}
*/
#define DISP_LINE_LEN 16
-int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_md(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr, length;
#if defined(CONFIG_HAS_DATAFLASH)
return (rc);
}
-int do_mem_mm ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_mm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return mod_mem (cmdtp, 1, flag, argc, argv);
}
-int do_mem_nm ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_nm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return mod_mem (cmdtp, 0, flag, argc, argv);
}
-int do_mem_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_mw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr, writeval, count;
int size;
}
#endif /* CONFIG_MX_CYCLIC */
-int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_cmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr1, addr2, count, ngood;
int size;
return rcode;
}
-int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_cp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr, dest, count;
int size;
return 0;
}
-int do_mem_base (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_base(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
if (argc > 1) {
/* Set new base address.
return 0;
}
-int do_mem_loop (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_loop(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
ulong addr, length, i;
int size;
* configured using CONFIG_SYS_ALT_MEMTEST. The complete test loops until
* interrupted by ctrl-c or by a failure of one of the sub-tests.
*/
-int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
vu_long *addr, *start, *end;
ulong val;
#if defined(CONFIG_SYS_MEMTEST_SCRATCH)
vu_long *dummy = (vu_long*)CONFIG_SYS_MEMTEST_SCRATCH;
#else
- vu_long *dummy = 0; /* yes, this is address 0x0, not NULL */
+ vu_long *dummy = NULL; /* yes, this is address 0x0, not NULL */
#endif
int j;
#ifndef CONFIG_CRC32_VERIFY
-int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_crc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr, length;
ulong crc;
#include <common.h>
#include <command.h>
-int do_sleep (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_sleep(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong start = get_timer(0);
ulong delay;
delay = simple_strtoul(argv[1], NULL, 10) * CONFIG_SYS_HZ;
while (get_timer(start) < delay) {
- if (ctrlc ())
+ if (ctrlc())
return (-1);
- udelay (100);
+ udelay(100);
}
return 0;
printf("Bus Width: %d-bit\n", mmc->bus_width);
}
-int do_mmcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mmcinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
struct mmc *mmc;
"- dislay info of the current MMC device"
);
-int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
enum mmc_state state;
addr = (void *)simple_strtoul(argv[idx], NULL, 16);
++idx;
} else
- addr = 0;
+ addr = NULL;
blk = simple_strtoul(argv[idx], NULL, 16);
cnt = simple_strtoul(argv[idx + 1], NULL, 16);
#include <common.h>
#include <command.h>
-int
+static int
cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
unsigned long cpuid;
return 0;
}
+#ifdef CONFIG_SYS_LONGHELP
+static char cpu_help_text[] =
+ "<num> reset - Reset cpu <num>\n"
+ "cpu <num> status - Status of cpu <num>\n"
+ "cpu <num> disable - Disable cpu <num>\n"
+ "cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]"
#ifdef CONFIG_PPC
-#define CPU_ARCH_HELP \
+ "\n"
" [args] : <pir> <r3> <r6>\n" \
" pir - processor id (if writeable)\n" \
" r3 - value for gpr 3\n" \
" When cpu <num> is released r4 and r5 = 0.\n" \
" r7 will contain the size of the initial mapped area"
#endif
+ "";
+#endif
U_BOOT_CMD(
cpu, CONFIG_SYS_MAXARGS, 1, cpu_cmd,
- "Multiprocessor CPU boot manipulation and release",
- "<num> reset - Reset cpu <num>\n"
- "cpu <num> status - Status of cpu <num>\n"
- "cpu <num> disable - Disable cpu <num>\n"
- "cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]"
-#ifdef CPU_ARCH_HELP
- "\n"
- CPU_ARCH_HELP
-#endif
+ "Multiprocessor CPU boot manipulation and release", cpu_help_text
);
extern void jffs2_free_cache(struct part_info *part);
/* mtdids mapping list, filled by parse_ids() */
-struct list_head mtdids;
+static struct list_head mtdids;
/* device/partition list, parse_cmdline() parses into here */
-struct list_head devices;
+static struct list_head devices;
/* current active device and partition number */
struct mtd_device *current_mtd_dev = NULL;
* @param size a pointer to the size of the mtd device (output)
* @return 0 if device is valid, 1 otherwise
*/
-int mtd_device_validate(u8 type, u8 num, u32 *size)
+static int mtd_device_validate(u8 type, u8 num, u32 *size)
{
struct mtd_info *mtd = NULL;
* @param dev_num parsed device number (output)
* @return 0 on success, 1 otherwise
*/
-int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num)
+int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type,
+ u8 *dev_num)
{
const char *p = id;
* @param argv arguments list
* @return 0 on success, 1 otherwise
*/
-int do_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
/* command line only */
struct mtd_device *dev;
* @param argv arguments list
* @return 0 on success, 1 otherwise
*/
-int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
if (argc == 2) {
if (strcmp(argv[1], "default") == 0) {
" - change active partition (e.g. part-id = nand0,1)"
);
-U_BOOT_CMD(
- mtdparts, 6, 0, do_mtdparts,
- "define flash/nand partitions",
+#ifdef CONFIG_SYS_LONGHELP
+static char mtdparts_help_text[] =
"\n"
" - list partition table\n"
"mtdparts delall\n"
"<size> := standard linux memsize OR '-' to denote all remaining space\n"
"<offset> := partition start offset within the device\n"
"<name> := '(' NAME ')'\n"
- "<ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)"
+ "<ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)";
+#endif
+
+U_BOOT_CMD(
+ mtdparts, 6, 0, do_mtdparts,
+ "define flash/nand partitions", mtdparts_help_text
);
/***************************************************/
{
nand_info_t *nand = &nand_info[idx];
struct nand_chip *chip = nand->priv;
- const int bufsz = 32;
- char buf[bufsz];
+ char buf[32];
printf("Device %d: ", idx);
if (chip->numchips > 1)
return ret;
}
-int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i, ret = 0;
ulong addr;
return CMD_RET_USAGE;
}
-U_BOOT_CMD(
- nand, CONFIG_SYS_MAXARGS, 1, do_nand,
- "NAND sub-system",
+#ifdef CONFIG_SYS_LONGHELP
+static char nand_help_text[] =
"info - show available NAND devices\n"
"nand device [dev] - show or set current device\n"
"nand read - addr off|partition size\n"
"nand env.oob set off|partition - set enviromnent offset\n"
"nand env.oob get - get environment offset"
#endif
+ "";
+#endif
+
+U_BOOT_CMD(
+ nand, CONFIG_SYS_MAXARGS, 1, do_nand,
+ "NAND sub-system", nand_help_text
);
static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
return bootm_maybe_autostart(cmdtp, cmd);
}
-int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+static int do_nandboot(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
char *boot_device = NULL;
int idx;
static int netboot_common(enum proto_t, cmd_tbl_t *, int, char * const []);
-int do_bootp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_bootp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- return netboot_common (BOOTP, cmdtp, argc, argv);
+ return netboot_common(BOOTP, cmdtp, argc, argv);
}
U_BOOT_CMD(
"[loadAddress] [[hostIPaddr:]bootfilename]"
);
-int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int ret;
#ifdef CONFIG_CMD_RARP
-int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_rarpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- return netboot_common (RARP, cmdtp, argc, argv);
+ return netboot_common(RARP, cmdtp, argc, argv);
}
U_BOOT_CMD(
#endif
#if defined(CONFIG_CMD_DHCP)
-int do_dhcp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_dhcp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return netboot_common(DHCP, cmdtp, argc, argv);
}
#endif
#if defined(CONFIG_CMD_NFS)
-int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_nfs(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return netboot_common(NFS, cmdtp, argc, argv);
}
);
#endif
-static void netboot_update_env (void)
+static void netboot_update_env(void)
{
char tmp[22];
if (NetOurGatewayIP) {
- ip_to_string (NetOurGatewayIP, tmp);
- setenv ("gatewayip", tmp);
+ ip_to_string(NetOurGatewayIP, tmp);
+ setenv("gatewayip", tmp);
}
if (NetOurSubnetMask) {
- ip_to_string (NetOurSubnetMask, tmp);
- setenv ("netmask", tmp);
+ ip_to_string(NetOurSubnetMask, tmp);
+ setenv("netmask", tmp);
}
if (NetOurHostName[0])
- setenv ("hostname", NetOurHostName);
+ setenv("hostname", NetOurHostName);
if (NetOurRootPath[0])
- setenv ("rootpath", NetOurRootPath);
+ setenv("rootpath", NetOurRootPath);
if (NetOurIP) {
- ip_to_string (NetOurIP, tmp);
- setenv ("ipaddr", tmp);
+ ip_to_string(NetOurIP, tmp);
+ setenv("ipaddr", tmp);
}
#if !defined(CONFIG_BOOTP_SERVERIP)
/*
* could have set it
*/
if (NetServerIP) {
- ip_to_string (NetServerIP, tmp);
- setenv ("serverip", tmp);
+ ip_to_string(NetServerIP, tmp);
+ setenv("serverip", tmp);
}
#endif
if (NetOurDNSIP) {
- ip_to_string (NetOurDNSIP, tmp);
- setenv ("dnsip", tmp);
+ ip_to_string(NetOurDNSIP, tmp);
+ setenv("dnsip", tmp);
}
#if defined(CONFIG_BOOTP_DNS2)
if (NetOurDNS2IP) {
- ip_to_string (NetOurDNS2IP, tmp);
- setenv ("dnsip2", tmp);
+ ip_to_string(NetOurDNS2IP, tmp);
+ setenv("dnsip2", tmp);
}
#endif
if (NetOurNISDomain[0])
- setenv ("domain", NetOurNISDomain);
+ setenv("domain", NetOurNISDomain);
#if defined(CONFIG_CMD_SNTP) \
&& defined(CONFIG_BOOTP_TIMEOFFSET)
if (NetTimeOffset) {
- sprintf (tmp, "%d", NetTimeOffset);
- setenv ("timeoffset", tmp);
+ sprintf(tmp, "%d", NetTimeOffset);
+ setenv("timeoffset", tmp);
}
#endif
#if defined(CONFIG_CMD_SNTP) \
&& defined(CONFIG_BOOTP_NTPSERVER)
if (NetNtpServerIP) {
- ip_to_string (NetNtpServerIP, tmp);
- setenv ("ntpserverip", tmp);
+ ip_to_string(NetNtpServerIP, tmp);
+ setenv("ntpserverip", tmp);
}
#endif
}
break;
case 3: load_addr = simple_strtoul(argv[1], NULL, 16);
- copy_filename (BootFile, argv[2], sizeof(BootFile));
+ copy_filename(BootFile, argv[2], sizeof(BootFile));
break;
}
#if defined(CONFIG_CMD_PING)
-int do_ping (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_ping(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc < 2)
return -1;
}
-int do_cdp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_cdp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int r;
#endif
#if defined(CONFIG_CMD_SNTP)
-int do_sntp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_sntp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char *toff;
if (argc < 2) {
- NetNtpServerIP = getenv_IPaddr ("ntpserverip");
+ NetNtpServerIP = getenv_IPaddr("ntpserverip");
if (NetNtpServerIP == 0) {
- printf ("ntpserverip not set\n");
+ printf("ntpserverip not set\n");
return (1);
}
} else {
NetNtpServerIP = string_to_ip(argv[1]);
if (NetNtpServerIP == 0) {
- printf ("Bad NTP server IP address\n");
+ printf("Bad NTP server IP address\n");
return (1);
}
}
- toff = getenv ("timeoffset");
- if (toff == NULL) NetTimeOffset = 0;
- else NetTimeOffset = simple_strtol (toff, NULL, 10);
+ toff = getenv("timeoffset");
+ if (toff == NULL)
+ NetTimeOffset = 0;
+ else
+ NetTimeOffset = simple_strtol(toff, NULL, 10);
if (NetLoop(SNTP) < 0) {
printf("SNTP failed: host %pI4 not responding\n",
return 0;
}
-int do_env_print (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_env_print(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
int i;
int rcode = 0;
/* Try assigning specified device */
if (console_assign(console, newval) < 0)
return 1;
-
- if (serial_assign(newval) < 0)
- return 1;
#endif /* CONFIG_CONSOLE_MUX */
}
* Set a new environment variable,
* or replace or delete an existing one.
*/
-int _do_env_set(int flag, int argc, char * const argv[])
+static int _do_env_set(int flag, int argc, char * const argv[])
{
int i, len;
char *name, *value, *s;
}
#ifndef CONFIG_SPL_BUILD
-int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc < 2)
return CMD_RET_USAGE;
* Interactively edit an environment variable
*/
#if defined(CONFIG_CMD_EDITENV)
-int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
char buffer[CONFIG_SYS_CBSIZE];
char *init_val;
#ifndef CONFIG_SPL_BUILD
#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
-int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
printf("Saving Environment to %s...\n", env_name_spec);
return CMD_RET_USAGE;
}
-U_BOOT_CMD(
- env, CONFIG_SYS_MAXARGS, 1, do_env,
- "environment handling commands",
+#ifdef CONFIG_SYS_LONGHELP
+static char env_help_text[] =
#if defined(CONFIG_CMD_ASKENV)
"ask name [message] [size] - ask for environment variable\nenv "
#endif
#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
"env save - save environment\n"
#endif
- "env set [-f] name [arg ...]\n"
+ "env set [-f] name [arg ...]\n";
+#endif
+
+U_BOOT_CMD(
+ env, CONFIG_SYS_MAXARGS, 1, do_env,
+ "environment handling commands", env_help_text
);
/*
#include <asm/io.h>
#include <pci.h>
-unsigned char ShortPCIListing = 1;
-
/*
* Follows routines for the output of infos about devices on PCI bus.
*/
* pci modify[.b, .w, .l] bus.device.function [addr]
* pci write[.b, .w, .l] bus.device.function addr value
*/
-int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr = 0, value = 0, size = 0;
pci_dev_t bdf = 0;
/***************************************************/
-
-U_BOOT_CMD(
- pci, 5, 1, do_pci,
- "list and access PCI Configuration Space",
+#ifdef CONFIG_SYS_LONGHELP
+static char pci_help_text[] =
"[bus] [long]\n"
" - short or long list of PCI devices on bus 'bus'\n"
#ifdef CONFIG_CMD_PCI_ENUM
"pci modify[.b, .w, .l] b.d.f address\n"
" - modify, auto increment CFG address\n"
"pci write[.b, .w, .l] b.d.f address value\n"
- " - write to CFG address"
+ " - write to CFG address";
+#endif
+
+U_BOOT_CMD(
+ pci, 5, 1, do_pci,
+ "list and access PCI Configuration Space", pci_help_text
);
extern void mpc85xx_reginfo(void);
#endif
-int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_reginfo(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
#if defined(CONFIG_8xx)
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
#include <part.h>
#include <sata.h>
-int sata_curr_device = -1;
+static int sata_curr_device = -1;
block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
int __sata_initialize(void)
}
#endif
-int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int rc = 0;
#include <image.h>
#include <pci.h>
+#ifdef CONFIG_SCSI_DEV_LIST
+#define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST
+#else
#ifdef CONFIG_SCSI_SYM53C8XX
#define SCSI_VEND_ID 0x1000
#ifndef CONFIG_SCSI_DEV_ID
#elif !defined(CONFIG_SCSI_AHCI_PLAT)
#error no scsi device defined
#endif
+#define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
+#endif
-
+#ifdef CONFIG_PCI
+const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST };
+#endif
static ccb tempccb; /* temporary scsi command buffer */
static unsigned char tempbuff[512]; /* temporary data buffer */
* forward declerations of some Setup Routines
*/
void scsi_setup_test_unit_ready(ccb * pccb);
-void scsi_setup_read_capacity(ccb * pccb);
void scsi_setup_read6(ccb * pccb, unsigned long start, unsigned short blocks);
void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks);
+static void scsi_setup_write_ext(ccb *pccb, unsigned long start,
+ unsigned short blocks);
void scsi_setup_inquiry(ccb * pccb);
void scsi_ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
-ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer);
+static int scsi_read_capacity(ccb *pccb, lbaint_t *capacity,
+ unsigned long *blksz);
+static ulong scsi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer);
+static ulong scsi_write(int device, ulong blknr,
+ lbaint_t blkcnt, const void *buffer);
/*********************************************************************************
void scsi_scan(int mode)
{
unsigned char i,perq,modi,lun;
- unsigned long capacity,blksz;
+ lbaint_t capacity;
+ unsigned long blksz;
ccb* pccb=(ccb *)&tempccb;
if(mode==1) {
scsi_dev_desc[i].dev=i;
scsi_dev_desc[i].part_type=PART_TYPE_UNKNOWN;
scsi_dev_desc[i].block_read=scsi_read;
+ scsi_dev_desc[i].block_write = scsi_write;
}
scsi_max_devs=0;
for(i=0;i<CONFIG_SYS_SCSI_MAX_SCSI_ID;i++) {
scsi_print_error(pccb);
continue;
}
- pccb->datalen=8;
- scsi_setup_read_capacity(pccb);
- if(scsi_exec(pccb)!=TRUE) {
+ if (scsi_read_capacity(pccb, &capacity, &blksz)) {
scsi_print_error(pccb);
continue;
}
- capacity=((unsigned long)tempbuff[0]<<24)|((unsigned long)tempbuff[1]<<16)|
- ((unsigned long)tempbuff[2]<<8)|((unsigned long)tempbuff[3]);
- blksz=((unsigned long)tempbuff[4]<<24)|((unsigned long)tempbuff[5]<<16)|
- ((unsigned long)tempbuff[6]<<8)|((unsigned long)tempbuff[7]);
scsi_dev_desc[scsi_max_devs].lba=capacity;
scsi_dev_desc[scsi_max_devs].blksz=blksz;
scsi_dev_desc[scsi_max_devs].type=perq;
scsi_curr_dev=0;
else
scsi_curr_dev = -1;
+
+ printf("Found %d device(s).\n", scsi_max_devs);
+ setenv_ulong("scsidevs", scsi_max_devs);
+}
+
+int scsi_get_disk_count(void)
+{
+ return scsi_max_devs;
}
#ifdef CONFIG_PCI
void scsi_init(void)
{
int busdevfunc;
+ int i;
+ /*
+ * Find a device from the list, this driver will support a single
+ * controller.
+ */
+ for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) {
+ /* get PCI Device ID */
+ busdevfunc = pci_find_device(scsi_device_list[i].vendor,
+ scsi_device_list[i].device,
+ 0);
+ if (busdevfunc != -1)
+ break;
+ }
- busdevfunc=pci_find_device(SCSI_VEND_ID,SCSI_DEV_ID,0); /* get PCI Device ID */
- if(busdevfunc==-1) {
- printf("Error SCSI Controller (%04X,%04X) not found\n",SCSI_VEND_ID,SCSI_DEV_ID);
+ if (busdevfunc == -1) {
+ printf("Error: SCSI Controller(s) ");
+ for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) {
+ printf("%04X:%04X ",
+ scsi_device_list[i].vendor,
+ scsi_device_list[i].device);
+ }
+ printf("not found\n");
return;
}
#ifdef DEBUG
else {
- printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n",SCSI_VEND_ID,SCSI_DEV_ID,(busdevfunc>>16)&0xFF,(busdevfunc>>11)&0x1F,(busdevfunc>>8)&0x7);
+ printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n",
+ scsi_device_list[i].vendor,
+ scsi_device_list[i].device,
+ (busdevfunc >> 16) & 0xFF,
+ (busdevfunc >> 11) & 0x1F,
+ (busdevfunc >> 8) & 0x7);
}
#endif
scsi_low_level_init(busdevfunc);
n = scsi_read(scsi_curr_dev, blk, cnt, (ulong *)addr);
printf ("%ld blocks read: %s\n",n,(n==cnt) ? "OK" : "ERROR");
return 0;
+ } else if (strcmp(argv[1], "write") == 0) {
+ ulong addr = simple_strtoul(argv[2], NULL, 16);
+ ulong blk = simple_strtoul(argv[3], NULL, 16);
+ ulong cnt = simple_strtoul(argv[4], NULL, 16);
+ ulong n;
+ printf("\nSCSI write: device %d block # %ld, "
+ "count %ld ... ",
+ scsi_curr_dev, blk, cnt);
+ n = scsi_write(scsi_curr_dev, blk, cnt,
+ (ulong *)addr);
+ printf("%ld blocks written: %s\n", n,
+ (n == cnt) ? "OK" : "ERROR");
+ return 0;
}
} /* switch */
return CMD_RET_USAGE;
#define SCSI_MAX_READ_BLK 0xFFFF /* almost the maximum amount of the scsi_ext command.. */
-ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer)
+static ulong scsi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer)
{
- ulong start,blks, buf_addr;
+ lbaint_t start, blks;
+ uintptr_t buf_addr;
unsigned short smallblks;
ccb* pccb=(ccb *)&tempccb;
device&=0xff;
buf_addr=(unsigned long)buffer;
start=blknr;
blks=blkcnt;
- debug ("\nscsi_read: dev %d startblk %lx, blccnt %lx buffer %lx\n",device,start,blks,(unsigned long)buffer);
+ debug("\nscsi_read: dev %d startblk " LBAF
+ ", blccnt " LBAF " buffer %lx\n",
+ device, start, blks, (unsigned long)buffer);
do {
pccb->pdata=(unsigned char *)buf_addr;
if(blks>SCSI_MAX_READ_BLK) {
start+=blks;
blks=0;
}
- debug ("scsi_read_ext: startblk %lx, blccnt %x buffer %lx\n",start,smallblks,buf_addr);
+ debug("scsi_read_ext: startblk " LBAF
+ ", blccnt %x buffer %lx\n",
+ start, smallblks, buf_addr);
if(scsi_exec(pccb)!=TRUE) {
scsi_print_error(pccb);
blkcnt-=blks;
}
buf_addr+=pccb->datalen;
} while(blks!=0);
- debug ("scsi_read_ext: end startblk %lx, blccnt %x buffer %lx\n",start,smallblks,buf_addr);
+ debug("scsi_read_ext: end startblk " LBAF
+ ", blccnt %x buffer %lx\n", start, smallblks, buf_addr);
return(blkcnt);
}
+/*******************************************************************************
+ * scsi_write
+ */
+
+/* Almost the maximum amount of the scsi_ext command.. */
+#define SCSI_MAX_WRITE_BLK 0xFFFF
+
+static ulong scsi_write(int device, ulong blknr,
+ lbaint_t blkcnt, const void *buffer)
+{
+ lbaint_t start, blks;
+ uintptr_t buf_addr;
+ unsigned short smallblks;
+ ccb* pccb = (ccb *)&tempccb;
+ device &= 0xff;
+ /* Setup device
+ */
+ pccb->target = scsi_dev_desc[device].target;
+ pccb->lun = scsi_dev_desc[device].lun;
+ buf_addr = (unsigned long)buffer;
+ start = blknr;
+ blks = blkcnt;
+ debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n",
+ __func__, device, start, blks, (unsigned long)buffer);
+ do {
+ pccb->pdata = (unsigned char *)buf_addr;
+ if (blks > SCSI_MAX_WRITE_BLK) {
+ pccb->datalen = (scsi_dev_desc[device].blksz *
+ SCSI_MAX_WRITE_BLK);
+ smallblks = SCSI_MAX_WRITE_BLK;
+ scsi_setup_write_ext(pccb, start, smallblks);
+ start += SCSI_MAX_WRITE_BLK;
+ blks -= SCSI_MAX_WRITE_BLK;
+ } else {
+ pccb->datalen = scsi_dev_desc[device].blksz * blks;
+ smallblks = (unsigned short)blks;
+ scsi_setup_write_ext(pccb, start, smallblks);
+ start += blks;
+ blks = 0;
+ }
+ debug("%s: startblk " LBAF ", blccnt %x buffer %lx\n",
+ __func__, start, smallblks, buf_addr);
+ if (scsi_exec(pccb) != TRUE) {
+ scsi_print_error(pccb);
+ blkcnt -= blks;
+ break;
+ }
+ buf_addr += pccb->datalen;
+ } while (blks != 0);
+ debug("%s: end startblk " LBAF ", blccnt %x buffer %lx\n",
+ __func__, start, smallblks, buf_addr);
+ return blkcnt;
+}
+
/* copy src to dest, skipping leading and trailing blanks
* and null terminate the string
*/
}
}
+int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz)
+{
+ *capacity = 0;
+
+ memset(pccb->cmd, 0, sizeof(pccb->cmd));
+ pccb->cmd[0] = SCSI_RD_CAPAC10;
+ pccb->cmd[1] = pccb->lun << 5;
+ pccb->cmdlen = 10;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+
+ pccb->datalen = 8;
+ if (scsi_exec(pccb) != TRUE)
+ return 1;
+
+ *capacity = ((lbaint_t)pccb->pdata[0] << 24) |
+ ((lbaint_t)pccb->pdata[1] << 16) |
+ ((lbaint_t)pccb->pdata[2] << 8) |
+ ((lbaint_t)pccb->pdata[3]);
+
+ if (*capacity != 0xffffffff) {
+ /* Read capacity (10) was sufficient for this drive. */
+ *blksz = ((unsigned long)pccb->pdata[4] << 24) |
+ ((unsigned long)pccb->pdata[5] << 16) |
+ ((unsigned long)pccb->pdata[6] << 8) |
+ ((unsigned long)pccb->pdata[7]);
+ return 0;
+ }
+
+ /* Read capacity (10) was insufficient. Use read capacity (16). */
+
+ memset(pccb->cmd, 0, sizeof(pccb->cmd));
+ pccb->cmd[0] = SCSI_RD_CAPAC16;
+ pccb->cmd[1] = 0x10;
+ pccb->cmdlen = 16;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+
+ pccb->datalen = 16;
+ if (scsi_exec(pccb) != TRUE)
+ return 1;
+
+ *capacity = ((uint64_t)pccb->pdata[0] << 56) |
+ ((uint64_t)pccb->pdata[1] << 48) |
+ ((uint64_t)pccb->pdata[2] << 40) |
+ ((uint64_t)pccb->pdata[3] << 32) |
+ ((uint64_t)pccb->pdata[4] << 24) |
+ ((uint64_t)pccb->pdata[5] << 16) |
+ ((uint64_t)pccb->pdata[6] << 8) |
+ ((uint64_t)pccb->pdata[7]);
+
+ *blksz = ((uint64_t)pccb->pdata[8] << 56) |
+ ((uint64_t)pccb->pdata[9] << 48) |
+ ((uint64_t)pccb->pdata[10] << 40) |
+ ((uint64_t)pccb->pdata[11] << 32) |
+ ((uint64_t)pccb->pdata[12] << 24) |
+ ((uint64_t)pccb->pdata[13] << 16) |
+ ((uint64_t)pccb->pdata[14] << 8) |
+ ((uint64_t)pccb->pdata[15]);
+
+ return 0;
+}
+
/************************************************************************************
* Some setup (fill-in) routines
pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */
}
-void scsi_setup_read_capacity(ccb * pccb)
-{
- pccb->cmd[0]=SCSI_RD_CAPAC;
- pccb->cmd[1]=pccb->lun<<5;
- pccb->cmd[2]=0;
- pccb->cmd[3]=0;
- pccb->cmd[4]=0;
- pccb->cmd[5]=0;
- pccb->cmd[6]=0;
- pccb->cmd[7]=0;
- pccb->cmd[8]=0;
- pccb->cmd[9]=0;
- pccb->cmdlen=10;
- pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */
-
-}
-
void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks)
{
pccb->cmd[0]=SCSI_READ10;
pccb->cmd[7],pccb->cmd[8]);
}
+void scsi_setup_write_ext(ccb *pccb, unsigned long start, unsigned short blocks)
+{
+ pccb->cmd[0] = SCSI_WRITE10;
+ pccb->cmd[1] = pccb->lun << 5;
+ pccb->cmd[2] = ((unsigned char) (start>>24)) & 0xff;
+ pccb->cmd[3] = ((unsigned char) (start>>16)) & 0xff;
+ pccb->cmd[4] = ((unsigned char) (start>>8)) & 0xff;
+ pccb->cmd[5] = ((unsigned char) (start)) & 0xff;
+ pccb->cmd[6] = 0;
+ pccb->cmd[7] = ((unsigned char) (blocks>>8)) & 0xff;
+ pccb->cmd[8] = (unsigned char)blocks & 0xff;
+ pccb->cmd[9] = 0;
+ pccb->cmdlen = 10;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+ debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
+ __func__,
+ pccb->cmd[0], pccb->cmd[1],
+ pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
+ pccb->cmd[7], pccb->cmd[8]);
+}
+
void scsi_setup_read6(ccb * pccb, unsigned long start, unsigned short blocks)
{
pccb->cmd[0]=SCSI_READ6;
"scsi device [dev] - show or set current device\n"
"scsi part [dev] - print partition table of one or all SCSI devices\n"
"scsi read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
- " to memory address `addr'"
+ " to memory address `addr'\n"
+ "scsi write addr blk# cnt - write `cnt' blocks starting at block\n"
+ " `blk#' from memory address `addr'"
);
U_BOOT_CMD(
}
}
-int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong a, b;
char buf[16];
return rcode;
}
-U_BOOT_CMD(
- source, 2, 0, do_source,
- "run script from memory",
+#ifdef CONFIG_SYS_LONGHELP
+static char source_help_text[] =
"[addr]\n"
"\t- run script starting at addr\n"
"\t- A valid image header must be present"
"For FIT format uImage addr must include subimage\n"
"unit name in the form of addr:<subimg_uname>"
#endif
+ "";
+#endif
+
+U_BOOT_CMD(
+ source, 2, 0, do_source,
+ "run script from memory", source_help_text
);
#endif
#include <common.h>
#include <command.h>
-int do_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char * const *ap;
int left, adv, expr, last_expr, neg, last_cmp;
"[args..]"
);
-int do_false(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_false(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return 1;
}
NULL
);
-int do_true(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_true(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return 0;
}
#endif
/* some display routines (info command) */
-char *usb_get_class_desc(unsigned char dclass)
+static char *usb_get_class_desc(unsigned char dclass)
{
switch (dclass) {
case USB_CLASS_PER_INTERFACE:
}
}
-void usb_display_class_sub(unsigned char dclass, unsigned char subclass,
- unsigned char proto)
+static void usb_display_class_sub(unsigned char dclass, unsigned char subclass,
+ unsigned char proto)
{
switch (dclass) {
case USB_CLASS_PER_INTERFACE:
}
}
-void usb_display_string(struct usb_device *dev, int index)
+static void usb_display_string(struct usb_device *dev, int index)
{
ALLOC_CACHE_ALIGN_BUFFER(char, buffer, 256);
}
}
-void usb_display_desc(struct usb_device *dev)
+static void usb_display_desc(struct usb_device *dev)
{
if (dev->descriptor.bDescriptorType == USB_DT_DEVICE) {
printf("%d: %s, USB Revision %x.%x\n", dev->devnum,
}
-void usb_display_conf_desc(struct usb_configuration_descriptor *config,
- struct usb_device *dev)
+static void usb_display_conf_desc(struct usb_configuration_descriptor *config,
+ struct usb_device *dev)
{
printf(" Configuration: %d\n", config->bConfigurationValue);
printf(" - Interfaces: %d %s%s%dmA\n", config->bNumInterfaces,
}
}
-void usb_display_if_desc(struct usb_interface_descriptor *ifdesc,
- struct usb_device *dev)
+static void usb_display_if_desc(struct usb_interface_descriptor *ifdesc,
+ struct usb_device *dev)
{
printf(" Interface: %d\n", ifdesc->bInterfaceNumber);
printf(" - Alternate Setting %d, Endpoints: %d\n",
}
}
-void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc)
+static void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc)
{
printf(" - Endpoint %d %s ", epdesc->bEndpointAddress & 0xf,
(epdesc->bEndpointAddress & 0x80) ? "In" : "Out");
}
/* main routine to diasplay the configs, interfaces and endpoints */
-void usb_display_config(struct usb_device *dev)
+static void usb_display_config(struct usb_device *dev)
{
struct usb_config *config;
struct usb_interface *ifdesc;
}
/* shows the device tree recursively */
-void usb_show_tree_graph(struct usb_device *dev, char *pre)
+static void usb_show_tree_graph(struct usb_device *dev, char *pre)
{
int i, index;
int has_child, last_child;
}
/* main routine for the tree command */
-void usb_show_tree(struct usb_device *dev)
+static void usb_show_tree(struct usb_device *dev)
{
char preamble[32];
* usb boot command intepreter. Derived from diskboot
*/
#ifdef CONFIG_USB_STORAGE
-int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return common_diskboot(cmdtp, "usb", argc, argv);
}
/******************************************************************************
* usb command intepreter
*/
-int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i;
const char __weak version_string[] = U_BOOT_VERSION_STRING;
-int do_version(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_version(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
printf("\n%s\n", version_string);
#ifdef CC_VERSION_STRING
#define CONFIG_SYS_XIMG_LEN 0x800000
#endif
-int
+static int
do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
ulong addr = load_addr;
return 0;
}
-U_BOOT_CMD(
- imxtract, 4, 1, do_imgextract,
- "extract a part of a multi-image",
+#ifdef CONFIG_SYS_LONGHELP
+static char imgextract_help_text[] =
"addr part [dest]\n"
" - extract <part> from legacy image at <addr> and copy to <dest>"
#if defined(CONFIG_FIT)
"addr uname [dest]\n"
" - extract <uname> subimage from FIT image at <addr> and copy to <dest>"
#endif
+ "";
+#endif
+
+U_BOOT_CMD(
+ imxtract, 4, 1, do_imgextract,
+ "extract a part of a multi-image", imgextract_help_text
);
#define DOS_FS_TYPE_OFFSET 0x36
#define DOS_FS32_TYPE_OFFSET 0x52
-static int do_zfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int do_zfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char *filename = NULL;
int dev;
-static int do_zfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int do_zfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
const char *filename = "/";
int part;
cmd_tbl_t *find_cmd (const char *cmd)
{
- int len = &__u_boot_cmd_end - &__u_boot_cmd_start;
- return find_cmd_tbl(cmd, &__u_boot_cmd_start, len);
+ cmd_tbl_t *start = ll_entry_start(cmd_tbl_t, cmd);
+ const int len = ll_entry_count(cmd_tbl_t, cmd);
+ return find_cmd_tbl(cmd, start, len);
}
int cmd_usage(const cmd_tbl_t *cmdtp)
static int complete_cmdv(int argc, char * const argv[], char last_char, int maxv, char *cmdv[])
{
- cmd_tbl_t *cmdtp;
+ cmd_tbl_t *cmdtp = ll_entry_start(cmd_tbl_t, cmd);
+ const int count = ll_entry_count(cmd_tbl_t, cmd);
+ const cmd_tbl_t *cmdend = cmdtp + count;
const char *p;
int len, clen;
int n_found = 0;
if (argc == 0) {
/* output full list of commands */
- for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) {
+ for (; cmdtp != cmdend; cmdtp++) {
if (n_found >= maxv - 2) {
- cmdv[n_found++] = "...";
+ cmdv[n_found] = "...";
break;
}
- cmdv[n_found++] = cmdtp->name;
+ cmdv[n_found] = cmdtp->name;
}
cmdv[n_found] = NULL;
return n_found;
len = p - cmd;
/* return the partial matches */
- for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) {
+ for (; cmdtp != cmdend; cmdtp++) {
clen = strlen(cmdtp->name);
if (clen < len)
#define IAV(i) bin_at(i), bin_at(i)
static mbinptr av_[NAV * 2 + 2] = {
- 0, 0,
+ NULL, NULL,
IAV(0), IAV(1), IAV(2), IAV(3), IAV(4), IAV(5), IAV(6), IAV(7),
IAV(8), IAV(9), IAV(10), IAV(11), IAV(12), IAV(13), IAV(14), IAV(15),
IAV(16), IAV(17), IAV(18), IAV(19), IAV(20), IAV(21), IAV(22), IAV(23),
/* check if mem_malloc_init() was run */
if ((mem_malloc_start == 0) && (mem_malloc_end == 0)) {
/* not initialized yet */
- return 0;
+ return NULL;
}
- if ((long)bytes < 0) return 0;
+ if ((long)bytes < 0) return NULL;
nb = request2size(bytes); /* padded request size; */
/* Try to extend */
malloc_extend_top(nb);
if ( (remainder_size = chunksize(top) - nb) < (long)MINSIZE)
- return 0; /* propagate failure */
+ return NULL; /* propagate failure */
}
victim = top;
mchunkptr fwd; /* misc temp for linking */
int islr; /* track whether merging with last_remainder */
- if (mem == 0) /* free(0) has no effect */
+ if (mem == NULL) /* free(0) has no effect */
return;
p = mem2chunk(mem);
if (bytes == 0) { fREe(oldmem); return 0; }
#endif
- if ((long)bytes < 0) return 0;
+ if ((long)bytes < 0) return NULL;
/* realloc of null is supposed to be same as malloc */
- if (oldmem == 0) return mALLOc(bytes);
+ if (oldmem == NULL) return mALLOc(bytes);
newp = oldp = mem2chunk(oldmem);
newsize = oldsize = chunksize(oldp);
}
else
{
- next = 0;
+ next = NULL;
nextsize = 0;
}
/* try forward + backward first to save a later consolidation */
- if (next != 0)
+ if (next != NULL)
{
/* into top */
if (next == top)
}
/* backward only */
- if (prev != 0 && (long)(prevsize + newsize) >= (long)nb)
+ if (prev != NULL && (long)(prevsize + newsize) >= (long)nb)
{
unlink(prev, bck, fwd);
newp = prev;
newmem = mALLOc (bytes);
- if (newmem == 0) /* propagate failure */
- return 0;
+ if (newmem == NULL) /* propagate failure */
+ return NULL;
/* Avoid copy if newp is next chunk after oldp. */
/* (This can only happen when new chunk is sbrk'ed.) */
mchunkptr remainder; /* spare room at end to split off */
long remainder_size; /* its size */
- if ((long)bytes < 0) return 0;
+ if ((long)bytes < 0) return NULL;
/* If need less alignment than we give anyway, just relay to malloc */
nb = request2size(bytes);
m = (char*)(mALLOc(nb + alignment + MINSIZE));
- if (m == 0) return 0; /* propagate failure */
+ if (m == NULL) return NULL; /* propagate failure */
p = mem2chunk(m);
#endif
Void_t* mem = mALLOc (sz);
- if ((long)n < 0) return 0;
+ if ((long)n < 0) return NULL;
- if (mem == 0)
- return 0;
+ if (mem == NULL)
+ return NULL;
else
{
p = mem2chunk(mem);
#endif
{
mchunkptr p;
- if (mem == 0)
+ if (mem == NULL)
return 0;
else
{
/************************************************************************
* Default settings to be used when no valid environment is found
*/
-
-const uchar default_environment[] = {
-#ifdef CONFIG_BOOTARGS
- "bootargs=" CONFIG_BOOTARGS "\0"
-#endif
-#ifdef CONFIG_BOOTCOMMAND
- "bootcmd=" CONFIG_BOOTCOMMAND "\0"
-#endif
-#ifdef CONFIG_RAMBOOTCOMMAND
- "ramboot=" CONFIG_RAMBOOTCOMMAND "\0"
-#endif
-#ifdef CONFIG_NFSBOOTCOMMAND
- "nfsboot=" CONFIG_NFSBOOTCOMMAND "\0"
-#endif
-#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
- "bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0"
-#endif
-#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0)
- "baudrate=" __stringify(CONFIG_BAUDRATE) "\0"
-#endif
-#ifdef CONFIG_LOADS_ECHO
- "loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0"
-#endif
-#ifdef CONFIG_ETHADDR
- "ethaddr=" __stringify(CONFIG_ETHADDR) "\0"
-#endif
-#ifdef CONFIG_ETH1ADDR
- "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"
-#endif
-#ifdef CONFIG_ETH2ADDR
- "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"
-#endif
-#ifdef CONFIG_ETH3ADDR
- "eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0"
-#endif
-#ifdef CONFIG_ETH4ADDR
- "eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0"
-#endif
-#ifdef CONFIG_ETH5ADDR
- "eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0"
-#endif
-#ifdef CONFIG_ETHPRIME
- "ethprime=" CONFIG_ETHPRIME "\0"
-#endif
-#ifdef CONFIG_IPADDR
- "ipaddr=" __stringify(CONFIG_IPADDR) "\0"
-#endif
-#ifdef CONFIG_SERVERIP
- "serverip=" __stringify(CONFIG_SERVERIP) "\0"
-#endif
-#ifdef CONFIG_SYS_AUTOLOAD
- "autoload=" CONFIG_SYS_AUTOLOAD "\0"
-#endif
-#ifdef CONFIG_PREBOOT
- "preboot=" CONFIG_PREBOOT "\0"
-#endif
-#ifdef CONFIG_ROOTPATH
- "rootpath=" CONFIG_ROOTPATH "\0"
-#endif
-#ifdef CONFIG_GATEWAYIP
- "gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0"
-#endif
-#ifdef CONFIG_NETMASK
- "netmask=" __stringify(CONFIG_NETMASK) "\0"
-#endif
-#ifdef CONFIG_HOSTNAME
- "hostname=" __stringify(CONFIG_HOSTNAME) "\0"
-#endif
-#ifdef CONFIG_BOOTFILE
- "bootfile=" CONFIG_BOOTFILE "\0"
-#endif
-#ifdef CONFIG_LOADADDR
- "loadaddr=" __stringify(CONFIG_LOADADDR) "\0"
-#endif
-#ifdef CONFIG_CLOCKS_IN_MHZ
- "clocks_in_mhz=1\0"
-#endif
-#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0)
- "pcidelay=" __stringify(CONFIG_PCI_BOOTDELAY)"\0"
-#endif
-#ifdef CONFIG_ENV_VARS_UBOOT_CONFIG
- "arch=" CONFIG_SYS_ARCH "\0"
- "cpu=" CONFIG_SYS_CPU "\0"
- "board=" CONFIG_SYS_BOARD "\0"
-#ifdef CONFIG_SYS_VENDOR
- "vendor=" CONFIG_SYS_VENDOR "\0"
-#endif
-#ifdef CONFIG_SYS_SOC
- "soc=" CONFIG_SYS_SOC "\0"
-#endif
-#endif
-#ifdef CONFIG_EXTRA_ENV_SETTINGS
- CONFIG_EXTRA_ENV_SETTINGS
-#endif
- "\0"
-};
+#include <env_default.h>
struct hsearch_data env_htab = {
.apply = env_check_apply,
# define ENV_CRC (~0)
#endif
-env_t environment __PPCENV__ = {
- ENV_CRC, /* CRC Sum */
-#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT
- 1, /* Flags: valid */
-#endif
- {
-#if defined(CONFIG_BOOTARGS)
- "bootargs=" CONFIG_BOOTARGS "\0"
-#endif
-#if defined(CONFIG_BOOTCOMMAND)
- "bootcmd=" CONFIG_BOOTCOMMAND "\0"
-#endif
-#if defined(CONFIG_RAMBOOTCOMMAND)
- "ramboot=" CONFIG_RAMBOOTCOMMAND "\0"
-#endif
-#if defined(CONFIG_NFSBOOTCOMMAND)
- "nfsboot=" CONFIG_NFSBOOTCOMMAND "\0"
-#endif
-#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
- "bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0"
-#endif
-#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0)
- "baudrate=" __stringify(CONFIG_BAUDRATE) "\0"
-#endif
-#ifdef CONFIG_LOADS_ECHO
- "loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0"
-#endif
-#ifdef CONFIG_ETHADDR
- "ethaddr=" __stringify(CONFIG_ETHADDR) "\0"
-#endif
-#ifdef CONFIG_ETH1ADDR
- "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"
-#endif
-#ifdef CONFIG_ETH2ADDR
- "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"
-#endif
-#ifdef CONFIG_ETH3ADDR
- "eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0"
-#endif
-#ifdef CONFIG_ETH4ADDR
- "eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0"
-#endif
-#ifdef CONFIG_ETH5ADDR
- "eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0"
-#endif
-#ifdef CONFIG_ETHPRIME
- "ethprime=" CONFIG_ETHPRIME "\0"
-#endif
-#ifdef CONFIG_IPADDR
- "ipaddr=" __stringify(CONFIG_IPADDR) "\0"
-#endif
-#ifdef CONFIG_SERVERIP
- "serverip=" __stringify(CONFIG_SERVERIP) "\0"
-#endif
-#ifdef CONFIG_SYS_AUTOLOAD
- "autoload=" CONFIG_SYS_AUTOLOAD "\0"
-#endif
-#ifdef CONFIG_ROOTPATH
- "rootpath=" CONFIG_ROOTPATH "\0"
-#endif
-#ifdef CONFIG_GATEWAYIP
- "gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0"
-#endif
-#ifdef CONFIG_NETMASK
- "netmask=" __stringify(CONFIG_NETMASK) "\0"
-#endif
-#ifdef CONFIG_HOSTNAME
- "hostname=" __stringify(CONFIG_HOSTNAME) "\0"
-#endif
-#ifdef CONFIG_BOOTFILE
- "bootfile=" CONFIG_BOOTFILE "\0"
-#endif
-#ifdef CONFIG_LOADADDR
- "loadaddr=" __stringify(CONFIG_LOADADDR) "\0"
-#endif
-#ifdef CONFIG_PREBOOT
- "preboot=" CONFIG_PREBOOT "\0"
-#endif
-#ifdef CONFIG_CLOCKS_IN_MHZ
- "clocks_in_mhz=" "1" "\0"
-#endif
-#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0)
- "pcidelay=" __stringify(CONFIG_PCI_BOOTDELAY)"\0"
-#endif
-#ifdef CONFIG_ENV_VARS_UBOOT_CONFIG
- "arch=" CONFIG_SYS_ARCH "\0"
- "cpu=" CONFIG_SYS_CPU "\0"
- "board=" CONFIG_SYS_BOARD "\0"
-#ifdef CONFIG_SYS_VENDOR
- "vendor=" CONFIG_SYS_VENDOR "\0"
-#endif
-#ifdef CONFIG_SYS_SOC
- "soc=" CONFIG_SYS_SOC "\0"
-#endif
-#endif
-#ifdef CONFIG_EXTRA_ENV_SETTINGS
- CONFIG_EXTRA_ENV_SETTINGS
-#endif
- "\0" /* Term. env_t.data with 2 NULs */
- }
-};
+#define DEFAULT_ENV_INSTANCE_EMBEDDED
+#include <env_default.h>
+
#ifdef CONFIG_ENV_ADDR_REDUND
env_t redundand_environment __PPCENV__ = {
0, /* CRC Sum: invalid */
char **global_argv;
unsigned int global_argc;
#endif
-unsigned int last_return_code;
-int nesting_level;
+static unsigned int last_return_code;
#ifndef __U_BOOT__
extern char **environ; /* This is in <unistd.h>, but protected with __USE_GNU */
#endif
* NAME=VALUE format. So the first order of business is to
* split 's' on the '=' into 'name' and 'value' */
value = strchr(name, '=');
- if (value==0 && ++value==0) {
+ if (value == NULL && ++value == NULL) {
free(name);
return -1;
}
result = -1;
} else {
cur->name = strdup(name);
- if(cur->name == 0) {
+ if (cur->name == NULL) {
free(cur);
result = -1;
} else {
struct variables *bottom = top_vars;
cur->value = strdup(value);
- cur->next = 0;
+ cur->next = NULL;
cur->flg_export = flg_export;
cur->flg_read_only = 0;
while(bottom->next) bottom=bottom->next;
if(strcmp(cur->name, name)==0)
break;
}
- if(cur!=0) {
+ if (cur != NULL) {
struct variables *next = top_vars;
if(cur->flg_read_only) {
error_msg("%s: readonly variable", name);
}
#endif
-struct pipe *new_pipe(void) {
+static struct pipe *new_pipe(void)
+{
struct pipe *pi;
pi = xmalloc(sizeof(struct pipe));
pi->num_progs = 0;
};
#define NRES (sizeof(reserved_list)/sizeof(struct reserved_combo))
-int reserved_word(o_string *dest, struct p_context *ctx)
+static int reserved_word(o_string *dest, struct p_context *ctx)
{
struct reserved_combo *r;
for (r=reserved_list;
#endif
/* return code is 0 for normal exit, 1 for syntax error */
-int parse_stream(o_string *dest, struct p_context *ctx,
- struct in_str *input, int end_trigger)
+static int parse_stream(o_string *dest, struct p_context *ctx,
+ struct in_str *input, int end_trigger)
{
unsigned int ch, m;
#ifndef __U_BOOT__
return 0;
}
-void mapset(const unsigned char *set, int code)
+static void mapset(const unsigned char *set, int code)
{
const unsigned char *s;
for (s=set; *s; s++) map[*s] = code;
}
-void update_ifs_map(void)
+static void update_ifs_map(void)
{
/* char *ifs and char map[256] are both globals. */
ifs = (uchar *)getenv("IFS");
/* most recursion does not come through here, the exeception is
* from builtin_source() */
-int parse_stream_outer(struct in_str *inp, int flag)
+static int parse_stream_outer(struct in_str *inp, int flag)
{
struct p_context ctx;
top_vars = malloc(sizeof(struct variables));
top_vars->name = "HUSH_VERSION";
top_vars->value = "0.01";
- top_vars->next = 0;
+ top_vars->next = NULL;
top_vars->flg_export = 0;
top_vars->flg_read_only = 1;
#ifdef CONFIG_NEEDS_MANUAL_RELOC
}
#ifdef __U_BOOT__
-int do_showvar (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_showvar(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
int i, k;
int rcode = 0;
int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size)
{
void *fdt_blob = *of_flat_tree;
- void *of_start = 0;
+ void *of_start = NULL;
char *fdt_high;
ulong of_len = 0;
int err;
of_start =
(void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000,
(ulong)desired_addr);
- if (of_start == 0) {
+ if (of_start == NULL) {
puts("Failed using fdt_high value for Device Tree");
goto error;
}
+ getenv_bootm_low());
}
- if (of_start == 0) {
+ if (of_start == NULL) {
puts("device tree - allocation error\n");
goto error;
}
return 0;
error:
- *of_flat_tree = 0;
+ *of_flat_tree = NULL;
*of_size = 0;
return 1;
}
return 0;
}
+#ifndef USE_HOSTCC
+/**
+ * fit_image_hash_get_ignore - get hash ignore flag
+ * @fit: pointer to the FIT format image header
+ * @noffset: hash node offset
+ * @ignore: pointer to an int, will hold hash ignore flag
+ *
+ * fit_image_hash_get_ignore() finds hash ignore property in a given hash node.
+ * If the property is found and non-zero, the hash algorithm is not verified by
+ * u-boot automatically.
+ *
+ * returns:
+ * 0, on ignore not found
+ * value, on ignore found
+ */
+int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore)
+{
+ int len;
+ int *value;
+
+ value = (int *)fdt_getprop(fit, noffset, FIT_IGNORE_PROP, &len);
+ if (value == NULL || len != sizeof(int))
+ *ignore = 0;
+ else
+ *ignore = *value;
+
+ return 0;
+}
+#endif
+
/**
* fit_set_timestamp - set node timestamp property
* @fit: pointer to the FIT format image header
char *algo;
uint8_t *fit_value;
int fit_value_len;
+#ifndef USE_HOSTCC
+ int ignore;
+#endif
uint8_t value[FIT_MAX_HASH_LEN];
int value_len;
int noffset;
}
printf("%s", algo);
+#ifndef USE_HOSTCC
+ fit_image_hash_get_ignore(fit, noffset, &ignore);
+ if (ignore) {
+ printf("-skipped ");
+ continue;
+ }
+#endif
+
if (fit_image_hash_get_value(fit, noffset, &fit_value,
&fit_value_len)) {
err_msg = " error!\nCan't get hash value "
}
}
+ if (noffset == -FDT_ERR_TRUNCATED || noffset == -FDT_ERR_BADSTRUCTURE) {
+ err_msg = " error!\nCorrupted or truncated tree";
+ goto error;
+ }
+
return 1;
error:
*/
if (console_assign(console, start[j]) < 0)
continue;
- /*
- * This was taken from common/cmd_nvedit.c.
- * This will never work because serial_assign() returns
- * 1 upon error, not -1.
- * This would almost always return an error anyway because
- * serial_assign() expects the name of a serial device, like
- * serial_smc, but the user generally only wants to set serial.
- */
- if (serial_assign(start[j]) < 0)
- continue;
cons_set[cs_idx++] = dev;
}
free(console_args);
#define HIST_MAX 20
#define HIST_SIZE CONFIG_SYS_CBSIZE
-static int hist_max = 0;
-static int hist_add_idx = 0;
+static int hist_max;
+static int hist_add_idx;
static int hist_cur = -1;
-unsigned hist_num = 0;
+static unsigned hist_num;
-char* hist_list[HIST_MAX];
-char hist_lines[HIST_MAX][HIST_SIZE + 1]; /* Save room for NULL */
+static char *hist_list[HIST_MAX];
+static char hist_lines[HIST_MAX][HIST_SIZE + 1]; /* Save room for NULL */
#define add_idx_minus_one() ((hist_add_idx == 0) ? hist_max : hist_add_idx-1)
}
}
-static void __noreturn jump_to_image_no_args(void)
+__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
typedef void __noreturn (*image_entry_noargs_t)(u32 *);
image_entry_noargs_t image_entry =
- (image_entry_noargs_t) spl_image.entry_point;
+ (image_entry_noargs_t) spl_image->entry_point;
- debug("image entry point: 0x%X\n", spl_image.entry_point);
+ debug("image entry point: 0x%X\n", spl_image->entry_point);
/* Pass the saved boot_params from rom code */
#if defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU)
image_entry = (image_entry_noargs_t)0x80100000;
default:
debug("Unsupported OS image.. Jumping nevertheless..\n");
}
- jump_to_image_no_args();
+ jump_to_image_no_args(&spl_image);
}
/*
#include <command.h>
#include <flash.h>
#include <net.h>
+#include <net/tftp.h>
#include <malloc.h>
/* env variable holding the location of the update file */
tmp = le16_to_cpu(config->wTotalLength);
if (tmp > USB_BUFSIZ) {
- USB_PRINTF("usb_get_configuration_no: failed to get " \
- "descriptor - too long: %d\n", tmp);
+ printf("usb_get_configuration_no: failed to get " \
+ "descriptor - too long: %d\n", tmp);
return -1;
}
le16_to_cpus(&dev->descriptor.idProduct);
le16_to_cpus(&dev->descriptor.bcdDevice);
/* only support for one config for now */
- usb_get_configuration_no(dev, tmpbuf, 0);
+ err = usb_get_configuration_no(dev, tmpbuf, 0);
+ if (err < 0) {
+ printf("usb_new_device: Cannot read configuration, " \
+ "skipping device %04x:%04x\n",
+ dev->descriptor.idVendor, dev->descriptor.idProduct);
+ return -1;
+ }
usb_parse_config(dev, tmpbuf, 0);
usb_set_maxpacket(dev);
/* we set the default configuration here */
int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
struct us_data *ss);
unsigned long usb_stor_read(int device, unsigned long blknr,
- unsigned long blkcnt, void *buffer);
+ lbaint_t blkcnt, void *buffer);
unsigned long usb_stor_write(int device, unsigned long blknr,
- unsigned long blkcnt, const void *buffer);
+ lbaint_t blkcnt, const void *buffer);
struct usb_device * usb_get_dev_index(int index);
void uhci_show_temp_int_td(void);
}
#endif
-void usb_show_progress(void)
+static void usb_show_progress(void)
{
debug(".");
}
result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
US_BBB_RESET,
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0, us->ifnum, 0, 0, USB_CNTL_TIMEOUT * 5);
+ 0, us->ifnum, NULL, 0, USB_CNTL_TIMEOUT * 5);
if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
USB_STOR_PRINTF("RESET:stall\n");
* Set up the command for a BBB device. Note that the actual SCSI
* command is copied into cbw.CBWCDB.
*/
-int usb_stor_BBB_comdat(ccb *srb, struct us_data *us)
+static int usb_stor_BBB_comdat(ccb *srb, struct us_data *us)
{
int result;
int actlen;
/* FIXME: we also need a CBI_command which sets up the completion
* interrupt, and waits for it
*/
-int usb_stor_CB_comdat(ccb *srb, struct us_data *us)
+static int usb_stor_CB_comdat(ccb *srb, struct us_data *us)
{
int result = 0;
int dir_in, retry;
}
-int usb_stor_CBI_get_status(ccb *srb, struct us_data *us)
+static int usb_stor_CBI_get_status(ccb *srb, struct us_data *us)
{
int timeout;
(void *) &us->ip_data, us->irqmaxp, us->irqinterval);
timeout = 1000;
while (timeout--) {
- if ((volatile int *) us->ip_wanted == 0)
+ if ((volatile int *) us->ip_wanted == NULL)
break;
mdelay(10);
}
#define USB_TRANSPORT_NOT_READY_RETRY 10
/* clear a stall on an endpoint - special for BBB devices */
-int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt)
+static int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt)
{
int result;
/* ENDPOINT_HALT = 0, so set value to 0 */
result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
- 0, endpt, 0, 0, USB_CNTL_TIMEOUT * 5);
+ 0, endpt, NULL, 0, USB_CNTL_TIMEOUT * 5);
return result;
}
-int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
+static int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
{
int result, retry;
int dir_in;
return result;
}
-int usb_stor_CB_transport(ccb *srb, struct us_data *us)
+static int usb_stor_CB_transport(ccb *srb, struct us_data *us)
{
int result, status;
ccb *psrb;
#endif /* CONFIG_USB_BIN_FIXUP */
unsigned long usb_stor_read(int device, unsigned long blknr,
- unsigned long blkcnt, void *buffer)
+ lbaint_t blkcnt, void *buffer)
{
- unsigned long start, blks, buf_addr;
+ lbaint_t start, blks;
+ uintptr_t buf_addr;
unsigned short smallblks;
struct usb_device *dev;
struct us_data *ss;
start = blknr;
blks = blkcnt;
- USB_STOR_PRINTF("\nusb_read: dev %d startblk %lx, blccnt %lx"
+ USB_STOR_PRINTF("\nusb_read: dev %d startblk " LBAF ", blccnt " LBAF
" buffer %lx\n", device, start, blks, buf_addr);
do {
} while (blks != 0);
ss->flags &= ~USB_READY;
- USB_STOR_PRINTF("usb_read: end startblk %lx, blccnt %x buffer %lx\n",
+ USB_STOR_PRINTF("usb_read: end startblk " LBAF
+ ", blccnt %x buffer %lx\n",
start, smallblks, buf_addr);
usb_disable_asynch(0); /* asynch transfer allowed */
}
unsigned long usb_stor_write(int device, unsigned long blknr,
- unsigned long blkcnt, const void *buffer)
+ lbaint_t blkcnt, const void *buffer)
{
- unsigned long start, blks, buf_addr;
+ lbaint_t start, blks;
+ uintptr_t buf_addr;
unsigned short smallblks;
struct usb_device *dev;
struct us_data *ss;
start = blknr;
blks = blkcnt;
- USB_STOR_PRINTF("\nusb_write: dev %d startblk %lx, blccnt %lx"
+ USB_STOR_PRINTF("\nusb_write: dev %d startblk " LBAF ", blccnt " LBAF
" buffer %lx\n", device, start, blks, buf_addr);
do {
} while (blks != 0);
ss->flags &= ~USB_READY;
- USB_STOR_PRINTF("usb_write: end startblk %lx, blccnt %x buffer %lx\n",
+ USB_STOR_PRINTF("usb_write: end startblk " LBAF
+ ", blccnt %x buffer %lx\n",
start, smallblks, buf_addr);
usb_disable_asynch(0); /* asynch transfer allowed */
#ifndef REDBOOT /*SB */
typedef int cyg_int32;
-int
+static int
CYGACC_COMM_IF_GETC_TIMEOUT (char chan, char *c)
{
#define DELAY 20
return 0;
}
-void
+static void
CYGACC_COMM_IF_PUTC (char x, char y)
{
putc (y);
}
/* Parse (scan) a number */
-bool
+static bool
parse_num (char *s, unsigned long *val, char **es, char *delim)
{
bool first = true;
#########################################################################
+include $(TOPDIR)/helper.mk
+
ifeq ($(CURDIR),$(SRCTREE))
dir :=
else
#define PRINTF(fmt,args...)
#endif
+/* Rather than repeat this expression each time, add a define for it */
#if (defined(CONFIG_CMD_IDE) || \
defined(CONFIG_CMD_SATA) || \
defined(CONFIG_CMD_SCSI) || \
defined(CONFIG_CMD_USB) || \
defined(CONFIG_MMC) || \
defined(CONFIG_SYSTEMACE) )
+#define HAVE_BLOCK_DEVICE
+#endif
struct block_drvr {
char *name;
DECLARE_GLOBAL_DATA_PTR;
+#ifdef HAVE_BLOCK_DEVICE
block_dev_desc_t *get_dev(const char *ifname, int dev)
{
const struct block_drvr *drvr = block_drvr;
}
#endif
-#if (defined(CONFIG_CMD_IDE) || \
- defined(CONFIG_CMD_SATA) || \
- defined(CONFIG_CMD_SCSI) || \
- defined(CONFIG_CMD_USB) || \
- defined(CONFIG_MMC) || \
- defined(CONFIG_SYSTEMACE) )
+#ifdef HAVE_BLOCK_DEVICE
/* ------------------------------------------------------------------------- */
/*
}
#endif
-#if (defined(CONFIG_CMD_IDE) || \
- defined(CONFIG_CMD_SATA) || \
- defined(CONFIG_CMD_SCSI) || \
- defined(CONFIG_CMD_USB) || \
- defined(CONFIG_MMC) || \
- defined(CONFIG_SYSTEMACE) )
-
-#if defined(CONFIG_MAC_PARTITION) || \
- defined(CONFIG_DOS_PARTITION) || \
- defined(CONFIG_ISO_PARTITION) || \
- defined(CONFIG_AMIGA_PARTITION) || \
- defined(CONFIG_EFI_PARTITION)
+#ifdef HAVE_BLOCK_DEVICE
void init_part (block_dev_desc_t * dev_desc)
{
}
+#if defined(CONFIG_MAC_PARTITION) || \
+ defined(CONFIG_DOS_PARTITION) || \
+ defined(CONFIG_ISO_PARTITION) || \
+ defined(CONFIG_AMIGA_PARTITION) || \
+ defined(CONFIG_EFI_PARTITION)
+
static void print_part_header (const char *type, block_dev_desc_t * dev_desc)
{
puts ("\nPartition Map for ");
dev_desc->dev, type);
}
+#endif /* any CONFIG_..._PARTITION */
+
void print_part (block_dev_desc_t * dev_desc)
{
puts ("## Unknown partition table\n");
}
-
-#else /* neither MAC nor DOS nor ISO nor AMIGA nor EFI partition configured */
-# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION
-# error nor CONFIG_ISO_PARTITION nor CONFIG_AMIGA_PARTITION
-# error nor CONFIG_EFI_PARTITION configured!
-#endif
-
-#endif
+#endif /* HAVE_BLOCK_DEVICE */
int get_partition_info(block_dev_desc_t *dev_desc, int part
, disk_partition_t *info)
{
-#if defined(CONFIG_CMD_IDE) || \
- defined(CONFIG_CMD_SATA) || \
- defined(CONFIG_CMD_SCSI) || \
- defined(CONFIG_CMD_USB) || \
- defined(CONFIG_MMC) || \
- defined(CONFIG_SYSTEMACE)
+#ifdef HAVE_BLOCK_DEVICE
#ifdef CONFIG_PARTITION_UUIDS
/* The common case is no UUID support */
default:
break;
}
-#endif
+#endif /* HAVE_BLOCK_DEVICE */
return -1;
}
info->size = (*dev_desc)->lba;
info->blksz = (*dev_desc)->blksz;
info->bootable = 0;
+ strcpy((char *)info->type, BOOT_PART_TYPE);
+ strcpy((char *)info->name, "Whole Disk");
#ifdef CONFIG_PARTITION_UUIDS
info->uuid[0] = 0;
#endif
*/
if (p == MAX_SEARCH_PARTITIONS + 1)
*info = tmpinfo;
- ret = 0;
} else {
printf("** No valid partitions found **\n");
+ ret = -1;
goto cleanup;
}
}
return p->boot_ind == 0x80;
}
-static void print_one_part (dos_partition_t *p, int ext_part_sector, int part_num)
+static void print_one_part(dos_partition_t *p, int ext_part_sector,
+ int part_num, unsigned int disksig)
{
int lba_start = ext_part_sector + le32_to_int (p->start4);
int lba_size = le32_to_int (p->size4);
- printf("%5d\t\t%10d\t%10d\t%2x%s%s\n",
- part_num, lba_start, lba_size, p->sys_ind,
+ printf("%3d\t%-10d\t%-10d\t%08x-%02x\t%02x%s%s\n",
+ part_num, lba_start, lba_size, disksig, part_num, p->sys_ind,
(is_extended(p->sys_ind) ? " Extd" : ""),
(is_bootable(p) ? " Boot" : ""));
}
/* Print a partition that is relative to its Extended partition table
*/
-static void print_partition_extended (block_dev_desc_t *dev_desc, int ext_part_sector, int relative,
- int part_num)
+static void print_partition_extended(block_dev_desc_t *dev_desc,
+ int ext_part_sector, int relative,
+ int part_num, unsigned int disksig)
{
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, dev_desc->blksz);
dos_partition_t *pt;
return;
}
+ if (!ext_part_sector)
+ disksig = le32_to_int(&buffer[DOS_PART_DISKSIG_OFFSET]);
+
/* Print all primary/logical partitions */
pt = (dos_partition_t *) (buffer + DOS_PART_TBL_OFFSET);
for (i = 0; i < 4; i++, pt++) {
if ((pt->sys_ind != 0) &&
(ext_part_sector == 0 || !is_extended (pt->sys_ind)) ) {
- print_one_part (pt, ext_part_sector, part_num);
+ print_one_part(pt, ext_part_sector, part_num, disksig);
}
/* Reverse engr the fdisk part# assignment rule! */
if (is_extended (pt->sys_ind)) {
int lba_start = le32_to_int (pt->start4) + relative;
- print_partition_extended (dev_desc, lba_start,
- ext_part_sector == 0 ? lba_start
- : relative,
- part_num);
+ print_partition_extended(dev_desc, lba_start,
+ ext_part_sector == 0 ? lba_start : relative,
+ part_num, disksig);
}
}
void print_part_dos (block_dev_desc_t *dev_desc)
{
- printf ("Partition Start Sector Num Sectors Type\n");
- print_partition_extended (dev_desc, 0, 0, 1);
+ printf("Part\tStart Sector\tNum Sectors\tUUID\t\tType\n");
+ print_partition_extended(dev_desc, 0, 0, 1, 0);
}
int get_partition_info_dos (block_dev_desc_t *dev_desc, int part, disk_partition_t * info)
return name;
}
+static void uuid_string(unsigned char *uuid, char *str)
+{
+ static const u8 le[16] = {3, 2, 1, 0, 5, 4, 7, 6, 8, 9, 10, 11,
+ 12, 13, 14, 15};
+ int i;
+
+ for (i = 0; i < 16; i++) {
+ sprintf(str, "%02x", uuid[le[i]]);
+ str += 2;
+ switch (i) {
+ case 3:
+ case 5:
+ case 7:
+ case 9:
+ *str++ = '-';
+ break;
+ }
+ }
+}
+
+static efi_guid_t system_guid = PARTITION_SYSTEM_GUID;
+
+static inline int is_bootable(gpt_entry *p)
+{
+ return p->attributes.fields.legacy_bios_bootable ||
+ !memcmp(&(p->partition_type_guid), &system_guid,
+ sizeof(efi_guid_t));
+}
+
/*
* Public Functions (include/part.h)
*/
ALLOC_CACHE_ALIGN_BUFFER(gpt_header, gpt_head, 1);
gpt_entry *gpt_pte = NULL;
int i = 0;
+ char uuid[37];
if (!dev_desc) {
printf("%s: Invalid Argument(s)\n", __func__);
debug("%s: gpt-entry at %p\n", __func__, gpt_pte);
- printf("Part\tName\t\t\tStart LBA\tEnd LBA\n");
+ printf("Part\tStart LBA\tEnd LBA\t\tName\n");
+ printf("\tAttributes\n");
+ printf("\tType UUID\n");
+ printf("\tPartition UUID\n");
+
for (i = 0; i < le32_to_int(gpt_head->num_partition_entries); i++) {
+ /* Stop at the first non valid PTE */
+ if (!is_pte_valid(&gpt_pte[i]))
+ break;
- if (is_pte_valid(&gpt_pte[i])) {
- printf("%3d\t%-18s\t0x%08llX\t0x%08llX\n", (i + 1),
- print_efiname(&gpt_pte[i]),
- le64_to_int(gpt_pte[i].starting_lba),
- le64_to_int(gpt_pte[i].ending_lba));
- } else {
- break; /* Stop at the first non valid PTE */
- }
+ printf("%3d\t0x%08llx\t0x%08llx\t\"%s\"\n", (i + 1),
+ le64_to_int(gpt_pte[i].starting_lba),
+ le64_to_int(gpt_pte[i].ending_lba),
+ print_efiname(&gpt_pte[i]));
+ printf("\tattrs:\t0x%016llx\n", gpt_pte[i].attributes.raw);
+ uuid_string(gpt_pte[i].partition_type_guid.b, uuid);
+ printf("\ttype:\t%s\n", uuid);
+ uuid_string(gpt_pte[i].unique_partition_guid.b, uuid);
+ printf("\tuuid:\t%s\n", uuid);
}
/* Remember to free pte */
return;
}
-#ifdef CONFIG_PARTITION_UUIDS
-static void uuid_string(unsigned char *uuid, char *str)
-{
- static const u8 le[16] = {3, 2, 1, 0, 5, 4, 7, 6, 8, 9, 10, 11,
- 12, 13, 14, 15};
- int i;
-
- for (i = 0; i < 16; i++) {
- sprintf(str, "%02x", uuid[le[i]]);
- str += 2;
- switch (i) {
- case 3:
- case 5:
- case 7:
- case 9:
- *str++ = '-';
- break;
- }
- }
-}
-#endif
-
int get_partition_info_efi(block_dev_desc_t * dev_desc, int part,
disk_partition_t * info)
{
sprintf((char *)info->name, "%s",
print_efiname(&gpt_pte[part - 1]));
sprintf((char *)info->type, "U-Boot");
+ info->bootable = is_bootable(&gpt_pte[part - 1]);
#ifdef CONFIG_PARTITION_UUIDS
uuid_string(gpt_pte[part - 1].unique_partition_guid.b, info->uuid);
#endif
count = le32_to_int(pgpt_head->num_partition_entries) *
le32_to_int(pgpt_head->sizeof_partition_entry);
- debug("%s: count = %lu * %lu = %u\n", __func__,
+ debug("%s: count = %lu * %lu = %zu\n", __func__,
le32_to_int(pgpt_head->num_partition_entries),
le32_to_int(pgpt_head->sizeof_partition_entry), count);
}
if (count == 0 || pte == NULL) {
- printf("%s: ERROR: Can't allocate 0x%X bytes for GPT Entries\n",
+ printf("%s: ERROR: Can't allocate 0x%zX "
+ "bytes for GPT Entries\n",
__func__, count);
return NULL;
}
sizeof(unused_guid.b)) == 0) {
debug("%s: Found an unused PTE GUID at 0x%08X\n", __func__,
- (unsigned int)pte);
+ (unsigned int)(uintptr_t)pte);
return 0;
} else {
unsigned char reserved2[GPT_BLOCK_SIZE - 92];
} __attribute__ ((packed)) gpt_header;
-typedef struct _gpt_entry_attributes {
- unsigned long long required_to_function:1;
- unsigned long long reserved:47;
- unsigned long long type_guid_specific:16;
+typedef union _gpt_entry_attributes {
+ struct {
+ unsigned long long required_to_function:1;
+ unsigned long long no_block_io_protocol:1;
+ unsigned long long legacy_bios_bootable:1;
+ unsigned long long reserved:45;
+ unsigned long long type_guid_specific:16;
+ } fields;
+ unsigned long long raw;
} __attribute__ ((packed)) gpt_entry_attributes;
#define PARTNAME_SZ (72 / sizeof(efi_char16_t))
include $(TOPDIR)/config.mk
-DOCBOOKS :=
+DOCBOOKS := linker_lists.xml stdio.xml
###
# The build process is as follows (targets):
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="UBootLGArrays">
+ <bookinfo>
+ <title>The U-Boot Linker-Generated Arrays</title>
+
+ <legalnotice>
+ <para>
+ This documentation is free software; you can redistribute
+ it and/or modify it under the terms of the GNU General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later
+ version.
+ </para>
+
+ <para>
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU General Public License for more details.
+ </para>
+
+ <para>
+ You should have received a copy of the GNU General Public
+ License along with this program; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ MA 02111-1307 USA
+ </para>
+
+ <para>
+ For more details see the file COPYING in the source
+ distribution of U-Boot Bootloader.
+ </para>
+ </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+ <chapter id="adt">
+ <title>Linker-Generated Arrays</title>
+!Iinclude/linker_lists.h
+ </chapter>
+
+</book>
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="UBootSTDIO">
+ <bookinfo>
+ <title>The U-Boot STDIO subsystem</title>
+
+ <legalnotice>
+ <para>
+ This documentation is free software; you can redistribute
+ it and/or modify it under the terms of the GNU General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later
+ version.
+ </para>
+
+ <para>
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU General Public License for more details.
+ </para>
+
+ <para>
+ You should have received a copy of the GNU General Public
+ License along with this program; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ MA 02111-1307 USA
+ </para>
+
+ <para>
+ For more details see the file COPYING in the source
+ distribution of U-Boot Bootloader.
+ </para>
+ </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+ <chapter id="adt">
+ <title>U-Boot Serial subsystem</title>
+!Idrivers/serial/serial.c
+ </chapter>
+
+</book>
--- /dev/null
+This file contains API information of the initialization code written for
+Vitesse cross-point devices, VSC3316 and VSC3308 for board B4860QDS
+
+Author: Shaveta Leekha <shaveta@freescale.com>
+
+About Device:
+=============
+VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch capable of data rates upto 11.5Gbps.
+
+VSC3316 has 16 input and 16 output ports whereas VSC3308 has 8 input and 8 output ports. Programming of these devices are performed by two-wire or four-wire serial interface.
+
+Initialization:
+===============
+On reset, VSC devices are in low-power state with all inputs, outputs and connections in an off state.
+First thing required is to program it to interface with either two-wire or four-wire interface.
+In our case the interface is two-wire I2C serial interface. So the value in Interface mode register at address 79.h to be written is 0x02 for two-wire interface. Also for crosspoint connections to be activated, 01.h value need to be written in 75.h (core configuration register).
+
+API Overview:
+=============
+
+ vsc_if_enable(u8 vsc_addr):
+ --------------------------
+ This API programs VSC to interface with either two-wire or four-wire interface. In our case the interface is two-wire I2C serial interface. So the value in Interface mode register at address 79.h to be written is 0x02 for two-wire interface.
+ Parameters:
+ vsc_addr - Address of the VSC device on board.
+
+
+ vsc3316_config(u8 vsc_addr, int con_arr[][2], u8 num_con):
+ ---------------------------------------------------------
+ This API configures the VSC3316 device for required connections. Connection through the VSC device requires the inputs and outputs to be properly configured.
+ Connection registers are on page 00. It Configures the selected input and output correctly and join them to make a connection. It also program Input state register, Global input ISE, Global input LOS, Global core control, Output mode register and core control registers etc.
+ vsc3308_config(u8 vsc_addr, int con_arr[][2], u8 num_con) does the essential configurations for VSC3308.
+
+ Parameters:
+ vsc_addr - Address of the VSC device on board.
+ con_arr - connection array
+ num_con - number of connections to be configured
+
+ vsc_wp_config(u8 vsc_addr):
+ --------------------------
+ For crosspoint connections to be activated, 01.h value need to be written in 75.h (core configuration register), which is done by this API.
+ Parameters:
+ vsc_addr - Address of the VSC device on board.
**** Behind the scene ******
-The structure created is named with a special prefix (__u_boot_cmd_)
+The structure created is named with a special prefix (__u_boot_list_cmd_)
and placed by the linker in a special section.
This makes it possible for the final link to extract all commands
compiled into any object code and construct a static array so the
-command can be found in an array starting at __u_boot_cmd_start.
+command can be found in an array starting at _u_boot_list_cmd__start.
To ensure that the linker does not discard these symbols when linking
full U-Boot we generate a list of all the commands we have built (based
by writing in u-boot.lds ($(TOPDIR)/board/boardname/u-boot.lds) these
3 lines:
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+ .u_boot_list : {
+ #include "u-boot.lst";
+ }
This patch series adds support for ext4 ls,load and write features in uboot
Journaling is supported for write feature.
+To enable support for the ext4 (and ext2) filesystem implementation,
+#define CONFIG_FS_EXT4
+
+If you want write support,
+#define CONFIG_EXT4_WRITE
+
To Enable ext2 ls and load commands, modify the board specific config file with
#define CONFIG_CMD_EXT2
+This automatically defines CONFIG_FS_EXT4 for you.
To Enable ext4 ls and load commands, modify the board specific config file with
#define CONFIG_CMD_EXT4
+This automatically defines CONFIG_FS_EXT4 for you.
To enable ext4 write command, modify the board specific config file with
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
+These automatically define CONFIG_FS_EXT4 and CONFIG_EXT4_WRITE for you.
+
+Also relevant are the generic filesystem commands,
+#define CONFIG_CMD_FS_GENERIC
+This does not automatically enable EXT4 support for you.
Steps to test:
# bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1)
setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_cs2_cs3"
+ # bank(chip-select) interleaving (auto)
+ setenv hwconfig "fsl_ddr:bank_intlv=auto"
+ This auto mode only select from cs0_cs1_cs2_cs3, cs0_cs1, null dependings
+ on DIMMs.
+
Memory controller address hashing
==================================
If the DDR controller supports address hashing, it can be enabled by hwconfig.
--- /dev/null
+Freescale MCF54418TWR ColdFire Development Board
+================================================
+
+TsiChung Liew(Tsi-Chung.Liew@freescale.com)
+Created Mar 22, 2012
+===========================================
+
+
+Changed files:
+==============
+
+- board/freescale/m54418twr/m54418twr.c Dram setup
+- board/freescale/m54418twr/Makefile Makefile
+- board/freescale/m54418twr/config.mk config make
+- board/freescale/m54418twr/u-boot.lds Linker description
+
+- arch/m68k/cpu/mcf5445x/cpu.c cpu specific code
+- arch/m68k/cpu/mcf5445x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
+- arch/m68k/cpu/mcf5445x/interrupts.c cpu specific interrupt support
+- arch/m68k/cpu/mcf5445x/speed.c system, pci, flexbus, and cpu clock
+- arch/m68k/cpu/mcf5445x/Makefile Makefile
+- arch/m68k/cpu/mcf5445x/config.mk config make
+- arch/m68k/cpu/mcf5445x/start.S start up assembly code
+
+- doc/README.m54418twr This readme file
+
+- drivers/net/mcffec.c ColdFire common FEC driver
+- drivers/net/mcfmii.c ColdFire common MII driver
+- drivers/serial/mcfuart.c ColdFire common UART driver
+
+- arch/m68k/include/asm/bitops.h Bit operation function export
+- arch/m68k/include/asm/byteorder.h Byte order functions
+- arch/m68k/include/asm/fec.h FEC structure and definition
+- arch/m68k/include/asm/global_data.h Global data structure
+- arch/m68k/include/asm/immap.h ColdFire specific header file and driver macros
+- arch/m68k/include/asm/immap_5441x.h mcf5441x specific header file
+- arch/m68k/include/asm/io.h io functions
+- arch/m68k/include/asm/m5441x.h mcf5441x specific header file
+- arch/m68k/include/asm/posix_types.h Posix
+- arch/m68k/include/asm/processor.h header file
+- arch/m68k/include/asm/ptrace.h Exception structure
+- arch/m68k/include/asm/rtc.h Realtime clock header file
+- arch/m68k/include/asm/string.h String function export
+- arch/m68k/include/asm/timer.h Timer structure and definition
+- arch/m68k/include/asm/types.h Data types definition
+- arch/m68k/include/asm/uart.h Uart structure and definition
+- arch/m68k/include/asm/u-boot.h u-boot structure
+
+- include/configs/M54418TWR.h Board specific configuration file
+
+- arch/m68k/lib/board.c board init function
+- arch/m68k/lib/cache.c
+- arch/m68k/lib/interrupts.c Coldfire common interrupt functions
+- arch/m68k/lib/time.c Timer functions (Dma timer and PIT)
+- arch/m68k/lib/traps.c Exception init code
+
+1 MCF5441x specific Options/Settings
+====================================
+1.1 pre-loader is no longer suppoer in thie coldfire family
+
+1.2 Configuration settings for M54418TWR Development Board
+CONFIG_MCF5441x -- define for all MCF5441x CPUs
+CONFIG_M54418 -- define for all Freescale MCF54418 CPUs
+CONFIG_M54418TWR -- define for M54418TWR board
+
+CONFIG_MCFUART -- define to use common CF Uart driver
+CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
+CONFIG_BAUDRATE -- define UART baudrate
+
+CONFIG_MCFFEC -- define to use common CF FEC driver
+CONFIG_MII -- enable to use MII driver
+CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
+CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN --
+CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
+CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration
+CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
+CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register
+MCFFEC_TOUT_LOOP -- set FEC timeout loop
+CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot
+
+CONFIG_MCFTMR -- define to use DMA timer
+
+CONFIG_SYS_IMMR -- define for MBAR offset
+
+CONFIG_EXTRA_CLOCK -- Enable extra clock such as vco, flexbus, pci, etc
+
+CONFIG_SYS_MBAR -- define MBAR offset
+
+CONFIG_MONITOR_IS_IN_RAM -- Not support
+
+CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF54455 internal SRAM
+
+CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
+
+CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
+
+2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
+===========================================
+2.1. System memory map:
+ MRAM: 0x00000000-0x0003FFFF (256KB)
+ DDR: 0x40000000-0x47FFFFFF (128MB)
+ SRAM: 0x80000000-0x8000FFFF (64KB)
+ IP: 0xE0000000-0xFFFFFFFF (512MB)
+
+3. COMPILATION
+==============
+3.1 To create U-Boot the gcc-4.x compiler set (ColdFire ELF version)
+from codesourcery.com was used. Download it from:
+http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
+
+3.2 Compilation
+ export CROSS_COMPILE=cross-compile-prefix
+ cd u-boot
+ make distclean
+ make M54418TWR_config, or - default to spi serial flash boot, 50Mhz input clock
+ make M54418TWR_nand_mii_config, or - default to nand flash boot, mii mode, 25Mhz input clock
+ make M54418TWR_nand_rmii_config, or - default to nand flash boot, rmii mode, 50Mhz input clock
+ make M54418TWR_nand_rmii_lowfreq_config, or - default to nand flash boot, rmii mode, 50Mhz input clock
+ make M54418TWR_serial_mii_config, or - default to spi serial flash boot, 25Mhz input clock
+ make M54418TWR_serial_rmii_config, or - default to spi serial flash boot, 50Mhz input clock
+ make
+
+4. SCREEN DUMP
+==============
+4.1 M54418TWR Development board
+ Boot from NAND flash (NOTE: May not show exactly the same)
+
+U-Boot 2012.10-00209-g12ae1d8-dirty (Oct 18 2012 - 15:54:54)
+
+CPU: Freescale MCF54418 (Mask:a3 Version:1)
+ CPU CLK 250 MHz BUS CLK 125 MHz FLB CLK 125 MHz
+ INP CLK 50 MHz VCO CLK 500 MHz
+Board: Freescale MCF54418 Tower System
+SPI: ready
+DRAM: 128 MiB
+NAND: 256 MiB
+In: serial
+Out: serial
+Err: serial
+Net: FEC0, FEC1
+-> pri
+baudrate=115200
+bootargs=root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(k
+ernel)ro,-(jffs2) console=ttyS0,115200
+bootdelay=2
+eth1addr=00:e0:0c:bc:e5:61
+ethact=FEC0
+ethaddr=00:e0:0c:bc:e5:60
+fileaddr=40010000
+filesize=27354
+gatewayip=192.168.1.1
+hostname=M54418TWR
+inpclk=50000000
+ipaddr=192.168.1.2
+load=tftp ${loadaddr} ${u-boot};
+loadaddr=0x40010000
+mem=129024k
+netdev=eth0
+netmask=255.255.255.0
+prog=nand device 0;nand erase 0 40000;nb_update ${loadaddr} ${filesize};save
+serverip=192.168.1.1
+stderr=serial
+stdin=serial
+stdout=serial
+u-boot=u-boot.bin
+upd=run load; run prog
+
+Environment size: 653/131068 bytes
+-> bdinfo
+memstart = 0x40000000
+memsize = 0x08000000
+flashstart = 0x00000000
+flashsize = 0x00000000
+flashoffset = 0x00000000
+sramstart = 0x80000000
+sramsize = 0x00010000
+mbar = 0xFC000000
+cpufreq = 250 MHz
+busfreq = 125 MHz
+flbfreq = 125 MHz
+inpfreq = 50 MHz
+vcofreq = 500 MHz
+ethaddr = 00:e0:0c:bc:e5:60
+eth1addr = 00:e0:0c:bc:e5:61
+ip_addr = 192.168.1.2
+baudrate = 115200 bps
+-> help
+? - alias for 'help'
+base - print or set address offset
+bdinfo - print Board Info structure
+boot - boot default, i.e., run 'bootcmd'
+bootd - boot default, i.e., run 'bootcmd'
+bootelf - Boot from an ELF image in memory
+bootm - boot application image from memory
+bootp - boot image via network using BOOTP/TFTP protocol
+bootvx - Boot vxWorks from an ELF image
+cmp - memory compare
+coninfo - print console devices and information
+cp - memory copy
+crc32 - checksum calculation
+dcache - enable or disable data cache
+dhcp - boot image via network using DHCP/TFTP protocol
+echo - echo args to console
+editenv - edit environment variable
+env - environment handling commands
+exit - exit script
+false - do nothing, unsuccessfully
+go - start application at address 'addr'
+help - print command description/usage
+icache - enable or disable instruction cache
+iminfo - print header information for application image
+imxtract- extract a part of a multi-image
+itest - return true/false on integer compare
+loop - infinite loop on address range
+md - memory display
+mdio - MDIO utility commands
+mii - MII utility commands
+mm - memory modify (auto-incrementing address)
+mtest - simple RAM read/write test
+mw - memory write (fill)
+nand - NAND sub-system
+nb_update- Nand boot update program
+nboot - boot from NAND device
+nfs - boot image via network using NFS protocol
+nm - memory modify (constant address)
+ping - send ICMP ECHO_REQUEST to network host
+printenv- print environment variables
+reginfo - print register information
+reset - Perform RESET of the CPU
+run - run commands in an environment variable
+saveenv - save environment variables to persistent storage
+setenv - set environment variables
+sf - SPI flash sub-system
+showvar - print local hushshell variables
+sleep - delay execution for some time
+source - run script from memory
+sspi - SPI utility command
+test - minimal test like /bin/sh
+tftpboot- boot image via network using TFTP protocol
+true - do nothing, successfully
+version - print monitor, compiler and linker version
--- /dev/null
+Spin table in cache
+=====================================
+As specified by ePAPR v1.1, the spin table needs to be in cached memory. After
+DDR is initialized and U-boot relocates itself into DDR, the spin table is
+accessible for core 0. It is part of release.S, within 4KB range after
+__secondary_start_page. For other cores to use the spin table, the booting
+process is described below:
+
+Core 0 sets up the reset page on the top 4K of memory (or 4GB if total memory
+is more than 4GB), and creates a TLB to map it to 0xffff_f000, regardless of
+the physical address of this page, with WIMGE=0b01010. Core 0 also enables boot
+page translation for secondary cores to use this page of memory. Then 4KB
+memory is copied from __secondary_start_page to the boot page, after flusing
+cache because this page is mapped as normal DDR. Before copying the reset page,
+core 0 puts the physical address of the spin table (which is in release.S and
+relocated to the top of mapped memory) into a variable __spin_table_addr so
+that secondary cores can see it.
+
+When secondary cores boot up from 0xffff_f000 page, they only have one default
+TLB. While booting, they set up another TLB in AS=1 space and jump into
+the new space. The new TLB covers the physical address of the spin table page,
+with WIMGE =0b00100. Now secondary cores can keep polling the spin table
+without stress DDR bus because both the code and the spin table is in cache.
+
+For the above to work, DDR has to set the 'M' bit of WIMGE, in order to keep
+cache coherence.
--- /dev/null
+Board: Nokia RX-51 aka N900
+
+This board definition results in a u-boot.bin which can be chainloaded
+from NOLO in qemu or on a real N900. It does very little hardware config
+because NOLO has already configured the board. Only needed is enabling
+internal eMMC memory via twl4030 regulator which is not enabled by NOLO.
+
+NOLO is expecting a kernel image and will treat any image it finds in
+onenand as such. This u-boot is intended to be flashed to the N900 like
+a kernel. In order to transparently boot the original kernel, it will be
+appended to u-boot.bin at 0x40000. NOLO will load the entire image into
+(random) memory and execute u-boot, which saves hw revision, boot reason
+and boot mode ATAGs set by NOLO. Then the bootscripts will attempt to load
+uImage or boot.scr from a fat, ext2/ext3 or ext4 filesystem in external
+SD card or internal eMMC memory. If this fails or keyboard is closed then
+the appended kernel image will be booted using some generated and some
+stored ATAGs (see boot order).
+
+There is support for hardware watchdog. Hardware watchdog is started by
+NOLO so u-boot must kick watchdog to prevent reboot device (but not very
+often, max every 2 seconds). There is also support for framebuffer display
+output with ANSI espace codes and the N900 HW keyboard input. USB tty works
+but is disabled because it prevents the current Maemo kernel from booting.
+
+When U-Boot is starting it enable IBE bit in Auxiliary Control Register,
+which is needed for Thumb-2 ISA support. It is workaround for errata 430973.
+
+Default boot order:
+
+ * 0. if keyboard is closed boot automatically attached kernel image
+ * 1. try boot from external SD card
+ * 2. try boot from internal eMMC memory
+ * 3. try boot from attached kernel image
+
+Boot from SD or eMMC in this order:
+
+ * 1.
+ * 1.1 find boot.scr on first fat partition
+ * 1.2 find uImage on first fat parition
+ * 1.3 same order for 2. - 4. fat partition
+ * 2. same as 1. but for ext2/3 partition
+ * 3. same as 1. but for ext4 partition
+
+
+Available additional commands/variables:
+
+ * run sercon - Use serial port for control
+ * run usbcon - Use usbtty for control
+ * run vgacon - Use framebuffer and HW keyboard for control (default)
+
+ * run sdboot - Boot from external SD card (see boot order)
+ * run emmcboot - Boot from internal eMMC memory (see boot order)
+ * run attachboot - Boot attached kernel image (attached to U-Boot binary)
+
+ * run scriptload - Load boot script ${mmcscriptfile}
+ * run scriptboot - Run loaded boot script
+ * run kernload - Load kernel image ${mmckernfile}
+ * run initrdload - Load initrd image ${mmcinitrdfile}
+ * run kernboot - Boot loaded kernel image
+ * run kerninitrdboot - Boot loaded kernel image with loaded initrd image
+
+ * run trymmcscriptboot - Try to load and boot script ${mmcscriptfile}
+ * run trymmckernboot - Try to load and boot kernel image ${mmckernfile}
+ * run trymmckerninitrdboot - Try to load and boot kernel image ${mmckernfile}
+ with initrd image ${mmcinitrdfile}
+
+Additional variables for loading files from mmc:
+
+ * mmc ${mmcnum} (0 - external, 1 - internal)
+ * partition number ${mmcpart} (1 - 4)
+ * parition type ${mmctype} (fat, ext2)
+
+Additional varuables for booting kernel:
+
+ * setup_omap_atag - Add OMAP table into atags structure (needs maemo kernel)
+ * setup_console_atag - Enable serial console in OMAP table
+ * setup_boot_reason_atag - Change boot reason in OMAP table
+ * setup_boot_mode_atag - Change boot mode in OMAP table
+
+USB TTY:
+
+ Maemo kernel 2.6.28 will crash if u-boot enable usb tty. So USB TTY is disabled.
+ For enabling USB TTY just add this line to file include/configs/nokia_rx51.h
+
+ #define CONFIG_USB_TTY
+
+
+ONENAND support:
+
+ ONENAND support is disabled because not working yet and cause linux kernel to
+ crash or no access to mtd. For enabling ONENAND support add this line at begin
+ of file include/configs/nokia_rx51.h
+
+ #define ONENAND_SUPPORT
+
+
+UBIFS support:
+
+ UBIFS support is disabled, because U-Boot image is too big and cannot be
+ flashed with attached zImage to RX-51 kernel nand area. For enabling UBIFS
+ support first enable ONENAND support and then add this line at begin of file
+ include/configs/nokia_rx51.h
+
+ #define UBIFS_SUPPORT
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
-TQM85xx powerpc MPC85xx - - Stefan Roese <sr@denx.de>
+AMX860 powerpc mpc860 - - Wolfgang Denk <wd@denx.de>
+c2mon powerpc mpc855 - - Wolfgang Denk <wd@denx.de>
+ETX094 powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
+IAD210 powerpc mpc860 - - -
+LANTEC powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
+SCM powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de>
+SX1 arm arm925t - -
+TQM85xx powerpc MPC85xx d923a5d5 2012-10-04 Stefan Roese <sr@denx.de>
apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
tb0229 mips mips32 3f3110d 2011-12-12
rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
--- /dev/null
+Overview
+--------
+The T4240QDS is a high-performance computing evaluation, development and test
+platform supporting the T4240 QorIQ™ Power Architecture™ processor. T4240QDS is
+optimized to support the high-bandwidth DDR3 memory ports, as well as the
+highly-configurable SerDes ports. The system is lead-free and RoHS-compliant.
+
+Board Features
+ SERDES Connections
+ 32 lanes grouped into four 8-lane banks
+ Two “front side” banks dedicated to Ethernet
+ - High-speed crosspoint switch fabric on selected lanes
+ - Two PCI Express slots with side-band connector supporting
+ - SGMII
+ - XAUI
+ - HiGig
+ - I-pass connectors allow board-to-board and loopback support
+ Two “back side” banks dedicated to other protocols
+ - High-speed crosspoint switch fabric on all lanes
+ - Four PCI Express slots with side-band connector supporting
+ - PCI Express 3.0
+ - SATA 2.0
+ - SRIO 2.0
+ - Supports 4X Aurora debug with two connectors
+ DDR Controllers
+ Three independant 64-bit DDR3 controllers
+ Supports rates of 1866 up to 2133 MHz data-rate
+ Supports two DDR3/DDR3LP UDIMM/RDIMMs per controller
+ DDR power supplies 1.5V to all devices with automatic tracking of VTT.
+ Power software-switchable to 1.35V if software detects all DDR3LP devices.
+ MT9JSF25672AZ-2G1KZESZF has been tested at 1333, 1600, 1867, 2000 and
+ 2133MT/s speeds. For 1867MT/s and above, read-to-write turnaround time
+ increases by 1 clock.
+
+ IFC/Local Bus
+ NAND flash: 8-bit, async or sync, up to 2GB.
+ NOR: 16-bit, Address/Data Multiplexed (ADM), up to 128 MB
+ NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB
+ - NOR devices support 16 virtual banks
+ GASIC: Minimal target within Qixis FPGA
+ PromJET rapid memory download support
+ Address demultiplexing handled within FPGA.
+ - Flexible demux allows 8 or 16 bit evaluation.
+ IFC Debug/Development card
+ - Support for 32-bit devices
+ Ethernet
+ Support two on-board RGMII 10/100/1G ethernet ports.
+ SGMII and XAUI support via SERDES block (see above).
+ 1588 support via Symmetricom board.
+ QIXIS System Logic FPGA
+ Manages system power and reset sequencing
+ Manages DUT, board, clock, etc. configuration for dynamic shmoo
+ Collects V-I-T data in background for code/power profiling.
+ Supports legacy TMT test features (POSt, IRS, SYSCLK-synchronous assertion)
+ General fault monitoring and logging
+ Runs from ATX “hot” power rails allowing operation while system is off.
+ Clocks
+ System and DDR clock (SYSCLK, “DDRCLK”)
+ - Switch selectable to one of 16 common settings in the interval 33MHz-166MHz.
+ - Software selectable in 1MHz increments from 1-200MHz.
+ SERDES clocks
+ - Provides clocks to all SerDes blocks and slots
+ - 100, 125 and 156.25 MHz
+ Power Supplies
+ Dedicated regulators for VDD
+ - Adjustable from (0.7V to 1.3V at 80A
+ - Regulators can be controlled by VID and/or software
+ Dedicated regulator for GVDD_PL: 1.35/1.5V at 22A
+ - VTT/MVREF automatically track operating voltage
+ Dedicated regulators/filters for AVDD supplies
+ Dedicated regulators for other supplies: OVDD, BVDD, DVDD, LVDD, POVDD, etc.
+ USB
+ Supports two USB 2.0 ports with integrated PHYs
+ - One type A, one type micro-AB with 1.0A power per port.
+ Other IO
+ eSDHC/MMC
+ - SDHC card slot
+ eSPI port
+ - High-speed serial flash
+ Two Serial port
+ Four I2C ports
+
+Memory map
+----------
+The addresses in brackets are physical addresses.
+
+0x0_0000_0000 (0x0_0000_0000) - 0x0_7fff_ffff 2GB DDR (more than 2GB is initialized but not mapped under with TLB)
+0x0_8000_0000 (0xc_0000_0000) - 0x0_dfff_ffff 1.5GB PCIE memory
+0x0_f000_0000 (0xf_0000_0000) - 0x0_f03f_ffff 4MB DCSR
+0x0_f400_0000 (0xf_f400_0000) - 0x0_f5ff_ffff 32MB BMan
+0x0_f600_0000 (0xf_f600_0000) - 0x0_f7ff_ffff 32MB QMan
+0x0_f800_0000 (0xf_f800_0000) - 0x0_f803_ffff 256KB PCIE IO
+0x0_e000_0000 (0xf_e000_0000) - 0x0_efff_ffff 256MB NOR flash
+0x0_fe00_0000 (0xf_fe00_0000) - 0x0_feff_ffff 16MB CCSR
+0x0_ffdf_0000 (0xf_ffdf_0000) - 0x0_ffdf_03ff 4KB QIXIS
+0x0_ffff_f000 (0x0_7fff_fff0) - 0x0_ffff_ffff 4KB Boot page translation for secondary cores
+
+The physical address of the last (boot page translation) varies with the actual DDR size.
-------------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 17) serial_lh7a40x.c
+ 17) serial_max3100.c
--------------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 18) serial_lpc2292.c
- --------------------
- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
-
- 19) serial_max3100.c
- --------------------
- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
-
- 20) serial_mxc.c
+ 18) serial_mxc.c
----------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 21) serial_netarm.c
+ 19) serial_netarm.c
-------------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 22) serial_pl01x.c
+ 20) serial_pl01x.c
------------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible, though this
driver in fact contains two drivers in total.
- 23) serial_pxa.c
+ 21) serial_pxa.c
----------------
This driver is a bit complicated, but due to clean support for
CONFIG_SERIAL_MULTI, there are no expected obstructions throughout the
conversion process.
- 24) serial_s3c24x0.c
+ 22) serial_s3c24x0.c
--------------------
This driver, being quite ad-hoc might need some work to bring back to shape.
- 25) serial_s3c44b0.c
+ 23) serial_s3c44b0.c
--------------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 26) serial_s5p.c
+ 24) serial_s5p.c
----------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 27) serial_sa1100.c
+ 25) serial_sa1100.c
-------------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 28) serial_sh.c
+ 26) serial_sh.c
---------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 29) serial_xuartlite.c
+ 27) serial_xuartlite.c
----------------------
No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
- 30) usbtty.c
+ 28) usbtty.c
------------
This driver seems very complicated and entangled with USB framework. The
conversion might be complicated here.
- 31) arch/powerpc/cpu/mpc512x/serial.c
+ 29) arch/powerpc/cpu/mpc512x/serial.c
-------------------------------------
This driver supports CONFIG_SERIAL_MULTI. This driver will need to be moved to
proper place.
alias reinhardm Reinhard Meyer <u-boot@emk-elektronik.de>
alias sbabic Stefano Babic <sbabic@denx.de>
alias scottwood Scott Wood <scottwood@freescale.com>
+alias sjg Simon Glass <sjg@chromium.org>
alias smcnutt Scott McNutt <smcnutt@psyent.com>
alias stroese Stefan Roese <sr@denx.de>
alias vapier Mike Frysinger <vapier@gentoo.org>
alias s3c samsung
alias s5pc samsung
alias samsung uboot, prom
-alias tegra uboot, Simon Glass <sjg@chromium.org>, Tom Warren <twarren@nvidia.com>, Stephen Warren <swarren@nvidia.com>
+alias tegra uboot, sjg, Tom Warren <twarren@nvidia.com>, Stephen Warren <swarren@nvidia.com>
alias tegra2 tegra
alias ti uboot, Tom Rini <trini@ti.com>
alias ppc7xx uboot, wd
alias ppc74xx uboot, wd
-alias sandbox Simon Glass <sjg@chromium.org>
+alias sandbox sjg
alias sb sandbox
alias sparc uboot, Daniel Hellstrom <daniel@gaisler.com>
alias superh uboot, iwamatsu
alias sh superh
-alias x86 uboot, gruss
+alias x86 uboot, sjg, gruss
# Subsystem aliases
alias cfi uboot, stroese
#include <linux/ctype.h>
#include <ahci.h>
+static int ata_io_flush(u8 port);
+
struct ahci_probe_ent *probe_ent = NULL;
hd_driveid_t *ataid[AHCI_MAX_PORTS];
#define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0)
+/*
+ * Some controllers limit number of blocks they can read/write at once.
+ * Contemporary SSD devices work much faster if the read/write size is aligned
+ * to a power of 2. Let's set default to 128 and allowing to be overwritten if
+ * needed.
+ */
+#ifndef MAX_SATA_BLOCKS_READ_WRITE
+#define MAX_SATA_BLOCKS_READ_WRITE 0x80
+#endif
+
+/* Maximum timeouts for each event */
+#define WAIT_MS_SPINUP 10000
+#define WAIT_MS_DATAIO 5000
+#define WAIT_MS_FLUSH 5000
+#define WAIT_MS_LINKUP 4
static inline u32 ahci_port_base(u32 base, u32 port)
{
#define msleep(a) udelay(a * 1000)
-#define ssleep(a) msleep(a * 1000)
+
+static void ahci_dcache_flush_range(unsigned begin, unsigned len)
+{
+ const unsigned long start = begin;
+ const unsigned long end = start + len;
+
+ debug("%s: flush dcache: [%#lx, %#lx)\n", __func__, start, end);
+ flush_dcache_range(start, end);
+}
+
+/*
+ * SATA controller DMAs to physical RAM. Ensure data from the
+ * controller is invalidated from dcache; next access comes from
+ * physical RAM.
+ */
+static void ahci_dcache_invalidate_range(unsigned begin, unsigned len)
+{
+ const unsigned long start = begin;
+ const unsigned long end = start + len;
+
+ debug("%s: invalidate dcache: [%#lx, %#lx)\n", __func__, start, end);
+ invalidate_dcache_range(start, end);
+}
+
+/*
+ * Ensure data for SATA controller is flushed out of dcache and
+ * written to physical memory.
+ */
+static void ahci_dcache_flush_sata_cmd(struct ahci_ioports *pp)
+{
+ ahci_dcache_flush_range((unsigned long)pp->cmd_slot,
+ AHCI_PORT_PRIV_DMA_SZ);
+}
static int waiting_for_cmd_completed(volatile u8 *offset,
int timeout_msec,
unsigned short vendor;
#endif
volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
- u32 tmp, cap_save;
+ u32 tmp, cap_save, cmd;
int i, j;
volatile u8 *port_mmio;
+ debug("ahci_host_init: start\n");
+
cap_save = readl(mmio + HOST_CAP);
cap_save &= ((1 << 28) | (1 << 17));
- cap_save |= (1 << 27);
+ cap_save |= (1 << 27); /* Staggered Spin-up. Not needed. */
/* global controller reset */
tmp = readl(mmio + HOST_CTL);
/* reset must complete within 1 second, or
* the hardware should be considered fried.
*/
- ssleep(1);
-
- tmp = readl(mmio + HOST_CTL);
- if (tmp & HOST_RESET) {
- debug("controller reset failed (0x%x)\n", tmp);
- return -1;
- }
+ i = 1000;
+ do {
+ udelay(1000);
+ tmp = readl(mmio + HOST_CTL);
+ if (!i--) {
+ debug("controller reset failed (0x%x)\n", tmp);
+ return -1;
+ }
+ } while (tmp & HOST_RESET);
writel_with_flush(HOST_AHCI_EN, mmio + HOST_CTL);
writel(cap_save, mmio + HOST_CAP);
debug("cap 0x%x port_map 0x%x n_ports %d\n",
probe_ent->cap, probe_ent->port_map, probe_ent->n_ports);
+ if (probe_ent->n_ports > CONFIG_SYS_SCSI_MAX_SCSI_ID)
+ probe_ent->n_ports = CONFIG_SYS_SCSI_MAX_SCSI_ID;
+
for (i = 0; i < probe_ent->n_ports; i++) {
probe_ent->port[i].port_mmio = ahci_port_base((u32) mmio, i);
port_mmio = (u8 *) probe_ent->port[i].port_mmio;
tmp = readl(port_mmio + PORT_CMD);
if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
PORT_CMD_FIS_RX | PORT_CMD_START)) {
+ debug("Port %d is active. Deactivating.\n", i);
tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
PORT_CMD_FIS_RX | PORT_CMD_START);
writel_with_flush(tmp, port_mmio + PORT_CMD);
msleep(500);
}
- writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD);
-
+ /* Add the spinup command to whatever mode bits may
+ * already be on in the command register.
+ */
+ cmd = readl(port_mmio + PORT_CMD);
+ cmd |= PORT_CMD_FIS_RX;
+ cmd |= PORT_CMD_SPIN_UP;
+ writel_with_flush(cmd, port_mmio + PORT_CMD);
+
+ /* Bring up SATA link.
+ * SATA link bringup time is usually less than 1 ms; only very
+ * rarely has it taken between 1-2 ms. Never seen it above 2 ms.
+ */
j = 0;
- while (j < 100) {
- msleep(10);
+ while (j < WAIT_MS_LINKUP) {
tmp = readl(port_mmio + PORT_SCR_STAT);
if ((tmp & 0xf) == 0x3)
break;
+ udelay(1000);
j++;
}
+ if (j == WAIT_MS_LINKUP) {
+ printf("SATA link %d timeout.\n", i);
+ continue;
+ } else {
+ debug("SATA link ok.\n");
+ }
+
+ /* Clear error status */
+ tmp = readl(port_mmio + PORT_SCR_ERR);
+ if (tmp)
+ writel(tmp, port_mmio + PORT_SCR_ERR);
+
+ debug("Spinning up device on SATA port %d... ", i);
+
+ j = 0;
+ while (j < WAIT_MS_SPINUP) {
+ tmp = readl(port_mmio + PORT_TFDATA);
+ if (!(tmp & (ATA_STAT_BUSY | ATA_STAT_DRQ)))
+ break;
+ udelay(1000);
+ j++;
+ }
+ printf("Target spinup took %d ms.\n", j);
+ if (j == WAIT_MS_SPINUP)
+ debug("timeout.\n");
+ else
+ debug("ok.\n");
tmp = readl(port_mmio + PORT_SCR_ERR);
debug("PORT_SCR_ERR 0x%x\n", tmp);
/* set irq mask (enables interrupts) */
writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
- /*register linkup ports */
+ /* register linkup ports */
tmp = readl(port_mmio + PORT_SCR_STAT);
- debug("Port %d status: 0x%x\n", i, tmp);
+ debug("SATA port %d status: 0x%x\n", i, tmp);
if ((tmp & 0xf) == 0x03)
probe_ent->link_port_map |= (0x01 << i);
}
u16 cc;
#endif
volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
- u32 vers, cap, impl, speed;
+ u32 vers, cap, cap2, impl, speed;
const char *speed_s;
const char *scc_s;
vers = readl(mmio + HOST_VERSION);
cap = probe_ent->cap;
+ cap2 = readl(mmio + HOST_CAP2);
impl = probe_ent->port_map;
speed = (cap >> 20) & 0xf;
speed_s = "1.5";
else if (speed == 2)
speed_s = "3";
+ else if (speed == 3)
+ speed_s = "6";
else
speed_s = "?";
((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s);
printf("flags: "
- "%s%s%s%s%s%s"
- "%s%s%s%s%s%s%s\n",
+ "%s%s%s%s%s%s%s"
+ "%s%s%s%s%s%s%s"
+ "%s%s%s%s%s%s\n",
cap & (1 << 31) ? "64bit " : "",
cap & (1 << 30) ? "ncq " : "",
cap & (1 << 28) ? "ilck " : "",
cap & (1 << 19) ? "nz " : "",
cap & (1 << 18) ? "only " : "",
cap & (1 << 17) ? "pmp " : "",
+ cap & (1 << 16) ? "fbss " : "",
cap & (1 << 15) ? "pio " : "",
cap & (1 << 14) ? "slum " : "",
- cap & (1 << 13) ? "part " : "");
+ cap & (1 << 13) ? "part " : "",
+ cap & (1 << 7) ? "ccc " : "",
+ cap & (1 << 6) ? "ems " : "",
+ cap & (1 << 5) ? "sxs " : "",
+ cap2 & (1 << 2) ? "apst " : "",
+ cap2 & (1 << 1) ? "nvmp " : "",
+ cap2 & (1 << 0) ? "boh " : "");
}
#ifndef CONFIG_SCSI_AHCI_PLAT
probe_ent->pio_mask = 0x1f;
probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
- probe_ent->mmio_base = (u32)pci_map_bar(pdev, AHCI_PCI_BAR,
- PCI_REGION_MEM);
+ pci_read_config_dword(pdev, PCI_BASE_ADDRESS_5, &probe_ent->mmio_base);
+ debug("ahci mmio_base=0x%08x\n", probe_ent->mmio_base);
/* Take from kernel:
* JMicron-specific fixup:
}
+#ifdef CONFIG_AHCI_SETFEATURES_XFER
static void ahci_set_feature(u8 port)
{
struct ahci_ioports *pp = &(probe_ent->port[port]);
u32 cmd_fis_len = 5; /* five dwords */
u8 fis[20];
- /*set feature */
- memset(fis, 0, 20);
+ /* set feature */
+ memset(fis, 0, sizeof(fis));
fis[0] = 0x27;
fis[1] = 1 << 7;
fis[2] = ATA_CMD_SETF;
fis[3] = SETFEATURES_XFER;
fis[12] = __ilog2(probe_ent->udma_mask + 1) + 0x40 - 0x01;
- memcpy((unsigned char *)pp->cmd_tbl, fis, 20);
+ memcpy((unsigned char *)pp->cmd_tbl, fis, sizeof(fis));
ahci_fill_cmd_slot(pp, cmd_fis_len);
+ ahci_dcache_flush_sata_cmd(pp);
writel(1, port_mmio + PORT_CMD_ISSUE);
readl(port_mmio + PORT_CMD_ISSUE);
- if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) {
- printf("set feature error!\n");
+ if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
+ WAIT_MS_DATAIO, 0x1)) {
+ printf("set feature error on port %d!\n", port);
}
}
+#endif
static int ahci_port_start(u8 port)
* First item in chunk of DMA memory: 32-slot command table,
* 32 bytes each in size
*/
- pp->cmd_slot = (struct ahci_cmd_hdr *)mem;
- debug("cmd_slot = %p\n", pp->cmd_slot);
+ pp->cmd_slot =
+ (struct ahci_cmd_hdr *)(uintptr_t)virt_to_phys((void *)mem);
+ debug("cmd_slot = 0x%x\n", (unsigned)pp->cmd_slot);
mem += (AHCI_CMD_SLOT_SZ + 224);
/*
* Second item: Received-FIS area
*/
- pp->rx_fis = mem;
+ pp->rx_fis = virt_to_phys((void *)mem);
mem += AHCI_RX_FIS_SZ;
/*
* Third item: data area for storing a single command
* and its scatter-gather table
*/
- pp->cmd_tbl = mem;
+ pp->cmd_tbl = virt_to_phys((void *)mem);
debug("cmd_tbl_dma = 0x%x\n", pp->cmd_tbl);
mem += AHCI_CMD_TBL_HDR;
- pp->cmd_tbl_sg = (struct ahci_sg *)mem;
+ pp->cmd_tbl_sg =
+ (struct ahci_sg *)(uintptr_t)virt_to_phys((void *)mem);
writel_with_flush((u32) pp->cmd_slot, port_mmio + PORT_LST_ADDR);
}
-static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf,
- int buf_len)
+static int ahci_device_data_io(u8 port, u8 *fis, int fis_len, u8 *buf,
+ int buf_len, u8 is_write)
{
struct ahci_ioports *pp = &(probe_ent->port[port]);
u32 port_status;
int sg_count;
- debug("Enter get_ahci_device_data: for port %d\n", port);
+ debug("Enter %s: for port %d\n", __func__, port);
if (port > probe_ent->n_ports) {
- printf("Invaild port number %d\n", port);
+ printf("Invalid port number %d\n", port);
return -1;
}
memcpy((unsigned char *)pp->cmd_tbl, fis, fis_len);
sg_count = ahci_fill_sg(port, buf, buf_len);
- opts = (fis_len >> 2) | (sg_count << 16);
+ opts = (fis_len >> 2) | (sg_count << 16) | (is_write << 6);
ahci_fill_cmd_slot(pp, opts);
+ ahci_dcache_flush_sata_cmd(pp);
+ ahci_dcache_flush_range((unsigned)buf, (unsigned)buf_len);
+
writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
- if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) {
+ if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
+ WAIT_MS_DATAIO, 0x1)) {
printf("timeout exit!\n");
return -1;
}
- debug("get_ahci_device_data: %d byte transferred.\n",
- pp->cmd_slot->status);
+
+ ahci_dcache_invalidate_range((unsigned)buf, (unsigned)buf_len);
+ debug("%s: %d byte transferred.\n", __func__, pp->cmd_slot->status);
return 0;
}
if (pccb->datalen <= 35)
return 0;
- memset(fis, 0, 20);
+ memset(fis, 0, sizeof(fis));
/* Construct the FIS */
fis[0] = 0x27; /* Host to device FIS. */
fis[1] = 1 << 7; /* Command FIS. */
if (!(tmpid = malloc(sizeof(hd_driveid_t))))
return -ENOMEM;
- if (get_ahci_device_data(port, (u8 *) & fis, 20,
- tmpid, sizeof(hd_driveid_t))) {
+ if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), tmpid,
+ sizeof(hd_driveid_t), 0)) {
debug("scsi_ahci: SCSI inquiry command failure.\n");
return -EIO;
}
/*
- * SCSI READ10 command operation.
+ * SCSI READ10/WRITE10 command operation.
*/
-static int ata_scsiop_read10(ccb * pccb)
+static int ata_scsiop_read_write(ccb *pccb, u8 is_write)
{
- u32 len = 0;
+ u32 lba = 0;
+ u16 blocks = 0;
u8 fis[20];
+ u8 *user_buffer = pccb->pdata;
+ u32 user_buffer_size = pccb->datalen;
- len = (((u32) pccb->cmd[7]) << 8) | ((u32) pccb->cmd[8]);
+ /* Retrieve the base LBA number from the ccb structure. */
+ memcpy(&lba, pccb->cmd + 2, sizeof(lba));
+ lba = be32_to_cpu(lba);
- /* For 10-byte and 16-byte SCSI R/W commands, transfer
+ /*
+ * And the number of blocks.
+ *
+ * For 10-byte and 16-byte SCSI R/W commands, transfer
* length 0 means transfer 0 block of data.
* However, for ATA R/W commands, sector count 0 means
* 256 or 65536 sectors, not 0 sectors as in SCSI.
*
* WARNING: one or two older ATA drives treat 0 as 0...
*/
- if (!len)
- return 0;
- memset(fis, 0, 20);
+ blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]);
- /* Construct the FIS */
- fis[0] = 0x27; /* Host to device FIS. */
- fis[1] = 1 << 7; /* Command FIS. */
- fis[2] = ATA_CMD_RD_DMA; /* Command byte. */
-
- /* LBA address, only support LBA28 in this driver */
- fis[4] = pccb->cmd[5];
- fis[5] = pccb->cmd[4];
- fis[6] = pccb->cmd[3];
- fis[7] = (pccb->cmd[2] & 0x0f) | 0xe0;
-
- /* Sector Count */
- fis[12] = pccb->cmd[8];
- fis[13] = pccb->cmd[7];
-
- /* Read from ahci */
- if (get_ahci_device_data(pccb->target, (u8 *) & fis, 20,
- pccb->pdata, pccb->datalen)) {
- debug("scsi_ahci: SCSI READ10 command failure.\n");
- return -EIO;
+ debug("scsi_ahci: %s %d blocks starting from lba 0x%x\n",
+ is_write ? "write" : "read", (unsigned)lba, blocks);
+
+ /* Preset the FIS */
+ memset(fis, 0, sizeof(fis));
+ fis[0] = 0x27; /* Host to device FIS. */
+ fis[1] = 1 << 7; /* Command FIS. */
+ /* Command byte (read/write). */
+ fis[2] = is_write ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT;
+
+ while (blocks) {
+ u16 now_blocks; /* number of blocks per iteration */
+ u32 transfer_size; /* number of bytes per iteration */
+
+ now_blocks = min(MAX_SATA_BLOCKS_READ_WRITE, blocks);
+
+ transfer_size = ATA_BLOCKSIZE * now_blocks;
+ if (transfer_size > user_buffer_size) {
+ printf("scsi_ahci: Error: buffer too small.\n");
+ return -EIO;
+ }
+
+ /* LBA48 SATA command but only use 32bit address range within
+ * that. The next smaller command range (28bit) is too small.
+ */
+ fis[4] = (lba >> 0) & 0xff;
+ fis[5] = (lba >> 8) & 0xff;
+ fis[6] = (lba >> 16) & 0xff;
+ fis[7] = 1 << 6; /* device reg: set LBA mode */
+ fis[8] = ((lba >> 24) & 0xff);
+ fis[3] = 0xe0; /* features */
+
+ /* Block (sector) count */
+ fis[12] = (now_blocks >> 0) & 0xff;
+ fis[13] = (now_blocks >> 8) & 0xff;
+
+ /* Read/Write from ahci */
+ if (ahci_device_data_io(pccb->target, (u8 *) &fis, sizeof(fis),
+ user_buffer, user_buffer_size,
+ is_write)) {
+ debug("scsi_ahci: SCSI %s10 command failure.\n",
+ is_write ? "WRITE" : "READ");
+ return -EIO;
+ }
+
+ /* If this transaction is a write, do a following flush.
+ * Writes in u-boot are so rare, and the logic to know when is
+ * the last write and do a flush only there is sufficiently
+ * difficult. Just do a flush after every write. This incurs,
+ * usually, one extra flush when the rare writes do happen.
+ */
+ if (is_write) {
+ if (-EIO == ata_io_flush(pccb->target))
+ return -EIO;
+ }
+ user_buffer += transfer_size;
+ user_buffer_size -= transfer_size;
+ blocks -= now_blocks;
+ lba += now_blocks;
}
return 0;
static int ata_scsiop_read_capacity10(ccb *pccb)
{
u32 cap;
+ u32 block_size;
if (!ataid[pccb->target]) {
printf("scsi_ahci: SCSI READ CAPACITY10 command failure. "
}
cap = le32_to_cpu(ataid[pccb->target]->lba_capacity);
+ if (cap == 0xfffffff) {
+ unsigned short *cap48 = ataid[pccb->target]->lba48_capacity;
+ if (cap48[2] || cap48[3]) {
+ cap = 0xffffffff;
+ } else {
+ cap = (le16_to_cpu(cap48[1]) << 16) |
+ (le16_to_cpu(cap48[0]));
+ }
+ }
+
+ cap = cpu_to_be32(cap);
+ memcpy(pccb->pdata, &cap, sizeof(cap));
+
+ block_size = cpu_to_be32((u32)512);
+ memcpy(&pccb->pdata[4], &block_size, 4);
+
+ return 0;
+}
+
+
+/*
+ * SCSI READ CAPACITY16 command operation.
+ */
+static int ata_scsiop_read_capacity16(ccb *pccb)
+{
+ u64 cap;
+ u64 block_size;
+
+ if (!ataid[pccb->target]) {
+ printf("scsi_ahci: SCSI READ CAPACITY16 command failure. "
+ "\tNo ATA info!\n"
+ "\tPlease run SCSI commmand INQUIRY firstly!\n");
+ return -EPERM;
+ }
+
+ cap = le32_to_cpu(ataid[pccb->target]->lba_capacity);
+ if (cap == 0xfffffff) {
+ memcpy(&cap, ataid[pccb->target]->lba48_capacity, sizeof(cap));
+ cap = le64_to_cpu(cap);
+ }
+
+ cap = cpu_to_be64(cap);
memcpy(pccb->pdata, &cap, sizeof(cap));
- pccb->pdata[4] = pccb->pdata[5] = 0;
- pccb->pdata[6] = 512 >> 8;
- pccb->pdata[7] = 512 & 0xff;
+ block_size = cpu_to_be64((u64)512);
+ memcpy(&pccb->pdata[8], &block_size, 8);
return 0;
}
switch (pccb->cmd[0]) {
case SCSI_READ10:
- ret = ata_scsiop_read10(pccb);
+ ret = ata_scsiop_read_write(pccb, 0);
break;
- case SCSI_RD_CAPAC:
+ case SCSI_WRITE10:
+ ret = ata_scsiop_read_write(pccb, 1);
+ break;
+ case SCSI_RD_CAPAC10:
ret = ata_scsiop_read_capacity10(pccb);
break;
+ case SCSI_RD_CAPAC16:
+ ret = ata_scsiop_read_capacity16(pccb);
+ break;
case SCSI_TST_U_RDY:
ret = ata_scsiop_test_unit_ready(pccb);
break;
printf("Can not start port %d\n", i);
continue;
}
+#ifdef CONFIG_AHCI_SETFEATURES_XFER
ahci_set_feature((u8) i);
+#endif
}
}
}
printf("Can not start port %d\n", i);
continue;
}
+#ifdef CONFIG_AHCI_SETFEATURES_XFER
ahci_set_feature((u8) i);
+#endif
}
}
err_out:
}
#endif
+/*
+ * In the general case of generic rotating media it makes sense to have a
+ * flush capability. It probably even makes sense in the case of SSDs because
+ * one cannot always know for sure what kind of internal cache/flush mechanism
+ * is embodied therein. At first it was planned to invoke this after the last
+ * write to disk and before rebooting. In practice, knowing, a priori, which
+ * is the last write is difficult. Because writing to the disk in u-boot is
+ * very rare, this flush command will be invoked after every block write.
+ */
+static int ata_io_flush(u8 port)
+{
+ u8 fis[20];
+ struct ahci_ioports *pp = &(probe_ent->port[port]);
+ volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
+ u32 cmd_fis_len = 5; /* five dwords */
+
+ /* Preset the FIS */
+ memset(fis, 0, 20);
+ fis[0] = 0x27; /* Host to device FIS. */
+ fis[1] = 1 << 7; /* Command FIS. */
+ fis[2] = ATA_CMD_FLUSH_EXT;
+
+ memcpy((unsigned char *)pp->cmd_tbl, fis, 20);
+ ahci_fill_cmd_slot(pp, cmd_fis_len);
+ writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
+
+ if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
+ WAIT_MS_FLUSH, 0x1)) {
+ debug("scsi_ahci: flush command timeout on port %d.\n", port);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+
void scsi_bus_reset(void)
{
/*Not implement*/
mdelay(1000);
}
-void dprint_buffer(unsigned char *buf, int len)
-{
- int i, j;
-
- i = 0;
- j = 0;
- printf("\n\r");
-
- for (i = 0; i < len; i++) {
- printf("%02x ", *buf++);
- j++;
- if (j == 16) {
- printf("\n\r");
- j = 0;
- }
- }
- printf("\n\r");
-}
-
static void fsl_sata_dump_sfis(struct sata_fis_d2h *s)
{
printf("Status FIS dump:\n\r");
printf("sector_count_exp: %02x\n\r", s->sector_count_exp);
}
-static int ata_wait_register(volatile unsigned *addr, u32 mask,
+static int ata_wait_register(unsigned __iomem *addr, u32 mask,
u32 val, u32 timeout_msec)
{
int i;
cmd_hdr_tbl_t *cmd_hdr;
u32 cda;
u32 val32;
- fsl_sata_reg_t *reg;
+ fsl_sata_reg_t __iomem *reg;
u32 sig;
int i;
fsl_sata_t *sata;
return 0;
}
-/* Hardware reset, like Power-on and COMRESET */
-void fsl_sata_hardware_reset(u32 reg_base)
-{
- fsl_sata_reg_t *reg = (fsl_sata_reg_t *)reg_base;
- u32 scontrol;
-
- /* Disable the SATA interface and put PHY offline */
- scontrol = in_le32(®->scontrol);
- scontrol = (scontrol & 0x0f0) | 0x304;
- out_le32(®->scontrol, scontrol);
-
- /* No speed strict */
- scontrol = in_le32(®->scontrol);
- scontrol = scontrol & ~0x0f0;
- out_le32(®->scontrol, scontrol);
-
- /* Issue PHY wake/reset, Hardware_reset_asserted */
- scontrol = in_le32(®->scontrol);
- scontrol = (scontrol & 0x0f0) | 0x301;
- out_le32(®->scontrol, scontrol);
-
- mdelay(100);
-
- /* Resume PHY, COMRESET negated, the device initialize hardware
- * and execute diagnostics, send good status-signature to host,
- * which is D2H register FIS, and then the device enter idle state.
- */
- scontrol = in_le32(®->scontrol);
- scontrol = (scontrol & 0x0f0) | 0x300;
- out_le32(®->scontrol, scontrol);
-
- mdelay(100);
- return;
-}
-
-static void fsl_sata_dump_regs(fsl_sata_reg_t *reg)
+static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg)
{
printf("\n\rSATA: %08x\n\r", (u32)reg);
printf("CQR: %08x\n\r", in_le32(®->cqr));
u32 prde_count;
u32 val32;
u32 ttl;
- fsl_sata_reg_t *reg = sata->reg_base;
+ fsl_sata_reg_t __iomem *reg = sata->reg_base;
int i;
/* Check xfer length */
return blkcnt;
}
-void fsl_sata_flush_cache(int dev)
+static void fsl_sata_flush_cache(int dev)
{
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
return blkcnt;
}
-u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write)
+static u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer,
+ int is_write)
{
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
return blkcnt;
}
-void fsl_sata_flush_cache_ext(int dev)
+static void fsl_sata_flush_cache_ext(int dev)
{
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
struct sata_fis_h2d h2d, *cfis = &h2d;
fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
}
-/* Software reset, set SRST of the Device Control register */
-void fsl_sata_software_reset(int dev)
-{
- return;
-}
-
static void fsl_sata_init_wcache(int dev, u16 *id)
{
fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
return sata->flush_ext;
}
-u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt,
+static u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt,
const void *buffer, int is_write)
{
u32 start, blks;
return blkcnt;
}
-u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt, const void *buffer,
- int is_write)
+static u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt,
+ const void *buffer, int is_write)
{
u32 start, blks;
u8 *addr;
* Command Header Entry
*/
typedef struct cmd_hdr_entry {
- u32 cda; /* Command Descriptor Address, 4 bytes aligned */
- u32 prde_fis_len; /* Number of PRD entries and FIS length */
- u32 ttl; /* Total transfer length */
- u32 attribute; /* the attribute of command */
+ __le32 cda; /* Command Descriptor Address,
+ 4 bytes aligned */
+ __le32 prde_fis_len; /* Number of PRD entries and FIS length */
+ __le32 ttl; /* Total transfer length */
+ __le32 attribute; /* the attribute of command */
} __attribute__ ((packed)) cmd_hdr_entry_t;
#define SATA_HC_CMD_HDR_ENTRY_SIZE sizeof(struct cmd_hdr_entry)
* PRD entry - Physical Region Descriptor entry
*/
typedef struct prd_entry {
- u32 dba; /* Data base address, 4 bytes aligned */
+ __le32 dba; /* Data base address, 4 bytes aligned */
u32 res1;
u32 res2;
- u32 ext_c_ddc; /* Indirect PRD flags, snoop and data word count */
+ __le32 ext_c_ddc; /* Indirect PRD flags, snoop and data word count */
} __attribute__ ((packed)) prd_entry_t;
#define SATA_HC_CMD_DESC_PRD_SIZE sizeof(struct prd_entry)
#include <fis.h>
#include <sata.h>
#include <libata.h>
+#include <sata.h>
#include "sata_sil.h"
/* Convert sectorsize to wordsize */
return blkcnt;
}
-ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt,
- const void *buffer, int is_write)
+static ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt,
+ const void *buffer, int is_write)
{
ulong start, blks, max_blks;
u8 *addr;
return blkcnt;
}
-ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt,
- const void *buffer, int is_write)
+static ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt,
+ const void *buffer, int is_write)
{
ulong start, blks, max_blks;
u8 *addr;
return blkcnt;
}
-void sil_sata_cmd_flush_cache(int dev)
+static void sil_sata_cmd_flush_cache(int dev)
{
struct sil_cmd_block cmdb, *pcmd = &cmdb;
sil_exec_cmd(dev, pcmd, 0);
}
-void sil_sata_cmd_flush_cache_ext(int dev)
+static void sil_sata_cmd_flush_cache_ext(int dev)
{
struct sil_cmd_block cmdb, *pcmd = &cmdb;
}
/* Establish the initial state */
+ (*fn->config) (FALSE, TRUE, cookie); /* De-assert nCONFIG */
+ udelay(100);
(*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */
udelay(2); /* T_cfg > 2us */
}
/* Configure GPIO registers early */
-void mpc83xx_gpio_init_f()
+void mpc83xx_gpio_init_f(void)
{
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
}
/* Initialize GPIO soft-copies */
-void mpc83xx_gpio_init_r()
+void mpc83xx_gpio_init_r(void)
{
#if MPC83XX_GPIO_CTRLRS >= 1
gpio_output_value[0] = CONFIG_MPC83XX_GPIO_0_INIT_VALUE;
return speed;
}
-unsigned int get_i2c_clock(int bus)
+static unsigned int get_i2c_clock(int bus)
{
if (bus)
return gd->i2c2_clk; /* I2C2 clock */
#define SH_I2C_ICCR_SCP (1 << 0)
/* ICSR / ICIC */
-#define SH_IC_BUSY (1 << 3)
+#define SH_IC_BUSY (1 << 4)
#define SH_IC_TACK (1 << 2)
#define SH_IC_WAIT (1 << 1)
#define SH_IC_DTE (1 << 0)
-static u8 iccl, icch;
+#ifdef CONFIG_SH_I2C_8BIT
+/* store 8th bit of iccl and icch in ICIC register */
+#define SH_I2C_ICIC_ICCLB8 (1 << 7)
+#define SH_I2C_ICIC_ICCHB8 (1 << 6)
+#endif
+
+static u16 iccl, icch;
#define IRQ_WAIT 1000
}
}
+static int irq_dte_with_tack(struct sh_i2c *base)
+{
+ int i;
+
+ for (i = 0 ; i < IRQ_WAIT ; i++) {
+ if (SH_IC_DTE & readb(&base->icsr))
+ break;
+ if (SH_IC_TACK & readb(&base->icsr))
+ return -1;
+ udelay(10);
+ }
+ return 0;
+}
+
static void irq_busy(struct sh_i2c *base)
{
int i;
}
}
-static void i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg, int stop)
+static int i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg, int stop)
{
- writeb(readb(&base->iccr) & ~SH_I2C_ICCR_ICE, &base->iccr);
- writeb(readb(&base->iccr) | SH_I2C_ICCR_ICE, &base->iccr);
-
- writeb(iccl, &base->iccl);
- writeb(icch, &base->icch);
- writeb(0, &base->icic);
+ u8 icic = SH_IC_TACK;
+
+ clrbits_8(&base->iccr, SH_I2C_ICCR_ICE);
+ setbits_8(&base->iccr, SH_I2C_ICCR_ICE);
+
+ writeb(iccl & 0xff, &base->iccl);
+ writeb(icch & 0xff, &base->icch);
+#ifdef CONFIG_SH_I2C_8BIT
+ if (iccl > 0xff)
+ icic |= SH_I2C_ICIC_ICCLB8;
+ if (icch > 0xff)
+ icic |= SH_I2C_ICIC_ICCHB8;
+#endif
+ writeb(icic, &base->icic);
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr);
irq_dte(base);
+ clrbits_8(&base->icsr, SH_IC_TACK);
writeb(id << 1, &base->icdr);
- irq_dte(base);
+ if (irq_dte_with_tack(base) != 0)
+ return -1;
writeb(reg, &base->icdr);
if (stop)
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS), &base->iccr);
- irq_dte(base);
+ if (irq_dte_with_tack(base) != 0)
+ return -1;
+ return 0;
}
static void i2c_finish(struct sh_i2c *base)
{
writeb(0, &base->icsr);
- writeb(readb(&base->iccr) & ~SH_I2C_ICCR_ICE, &base->iccr);
+ clrbits_8(&base->iccr, SH_I2C_ICCR_ICE);
}
-static void i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 val)
+static int i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 val)
{
- i2c_set_addr(base, id, reg, 0);
+ int ret = -1;
+ if (i2c_set_addr(base, id, reg, 0) != 0)
+ goto exit0;
udelay(10);
writeb(val, &base->icdr);
- irq_dte(base);
+ if (irq_dte_with_tack(base) != 0)
+ goto exit0;
writeb((SH_I2C_ICCR_ICE | SH_I2C_ICCR_RTS), &base->iccr);
- irq_dte(base);
+ if (irq_dte_with_tack(base) != 0)
+ goto exit0;
irq_busy(base);
-
+ ret = 0;
+exit0:
i2c_finish(base);
+ return ret;
}
-static u8 i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg)
+static int i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg)
{
- u8 ret;
-
- i2c_set_addr(base, id, reg, 1);
+ int ret = -1;
+
+#if defined(CONFIG_SH73A0)
+ if (i2c_set_addr(base, id, reg, 0) != 0)
+ goto exit0;
+#else
+ if (i2c_set_addr(base, id, reg, 1) != 0)
+ goto exit0;
udelay(100);
+#endif
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr);
irq_dte(base);
writeb(id << 1 | 0x01, &base->icdr);
- irq_dte(base);
+ if (irq_dte_with_tack(base) != 0)
+ goto exit0;
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_SCP), &base->iccr);
- irq_dte(base);
+ if (irq_dte_with_tack(base) != 0)
+ goto exit0;
- ret = readb(&base->icdr);
+ ret = readb(&base->icdr) & 0xff;
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RACK), &base->iccr);
readb(&base->icdr); /* Dummy read */
irq_busy(base);
-
+exit0:
i2c_finish(base);
return ret;
case 1:
base = (void *)CONFIG_SH_I2C_BASE1;
break;
+#ifdef CONFIG_SH_I2C_BASE2
+ case 2:
+ base = (void *)CONFIG_SH_I2C_BASE2;
+ break;
+#endif
+#ifdef CONFIG_SH_I2C_BASE3
+ case 3:
+ base = (void *)CONFIG_SH_I2C_BASE3;
+ break;
+#endif
+#ifdef CONFIG_SH_I2C_BASE4
+ case 4:
+ base = (void *)CONFIG_SH_I2C_BASE4;
+ break;
+#endif
default:
return -1;
}
denom = speed * (CONFIG_SH_I2C_DATA_HIGH + CONFIG_SH_I2C_DATA_LOW);
tmp = num * 10 / denom;
if (tmp % 10 >= 5)
- iccl = (u8)((num/denom) + 1);
+ iccl = (u16)((num/denom) + 1);
else
- iccl = (u8)(num/denom);
+ iccl = (u16)(num/denom);
/* Calculate the value for icch. From the data sheet:
icch = (p clock / transfer rate) * (H / (L + H)) */
num = CONFIG_SH_I2C_CLOCK * CONFIG_SH_I2C_DATA_HIGH;
tmp = num * 10 / denom;
if (tmp % 10 >= 5)
- icch = (u8)((num/denom) + 1);
+ icch = (u16)((num/denom) + 1);
else
- icch = (u8)(num/denom);
+ icch = (u16)(num/denom);
}
/*
*/
int i2c_read(u8 chip, u32 addr, int alen, u8 *buffer, int len)
{
+ int ret;
int i = 0;
- for (i = 0 ; i < len ; i++)
- buffer[i] = i2c_raw_read(base, chip, addr + i);
-
+ for (i = 0 ; i < len ; i++) {
+ ret = i2c_raw_read(base, chip, addr + i);
+ if (ret < 0)
+ return -1;
+ buffer[i] = ret & 0xff;
+ }
return 0;
}
{
int i = 0;
for (i = 0; i < len ; i++)
- i2c_raw_write(base, chip, addr + i, buffer[i]);
-
+ if (i2c_raw_write(base, chip, addr + i, buffer[i]) != 0)
+ return -1;
return 0;
}
*/
int i2c_probe(u8 chip)
{
- return 0;
+ int ret;
+
+ ret = i2c_set_addr(base, chip, 0, 1);
+ i2c_finish(base);
+ return ret;
}
#ifdef CONFIG_IXP425 /* only valid for IXP425 */
#include <asm/arch/ixp425.h>
#endif
-#ifdef CONFIG_LPC2292
-#include <asm/arch/hardware.h>
-#endif
#if defined(CONFIG_MPC852T) || defined(CONFIG_MPC866)
#include <asm/io.h>
#endif
/* includes */
#include <common.h>
+#include <linux/compiler.h>
#ifdef CONFIG_USE_CPCIDVI
extern u8 gt_cpcidvi_in8(u32 offset);
return in8(I8042_STATUS_REG) != 0xff;
}
+/*
+ * Implement a weak default function for boards that optionally
+ * need to skip the i8042 initialization.
+ */
+int __weak board_i8042_skip(void)
+{
+ /* As default, don't skip */
+ return 0;
+}
+
+void i8042_flush(void)
+{
+ int timeout;
+
+ /*
+ * The delay is to give the keyboard controller some time to fill the
+ * next byte.
+ */
+ while (1) {
+ timeout = 100; /* wait for no longer than 100us */
+ while (timeout > 0 && !(in8(I8042_STATUS_REG) & 0x01)) {
+ udelay(1);
+ timeout--;
+ }
+
+ /* Try to pull next byte if not timeout. */
+ if (in8(I8042_STATUS_REG) & 0x01)
+ in8(I8042_DATA_REG);
+ else
+ break;
+ }
+}
+
+int i8042_disable(void)
+{
+ if (kbd_input_empty() == 0)
+ return -1;
+
+ /* Disable keyboard */
+ out8(I8042_COMMAND_REG, 0xad);
+
+ if (kbd_input_empty() == 0)
+ return -1;
+
+ return 0;
+}
+
+
/*******************************************************************************
*
* i8042_kbd_init - reset keyboard and init state flags
int keymap, try;
char *penv;
- if (!kbd_controller_present())
+ if (!kbd_controller_present() || board_i8042_skip())
return -1;
#ifdef CONFIG_USE_CPCIDVI
static int kbd_input_empty(void)
{
- int kbdTimeout = KBD_TIMEOUT;
+ int kbdTimeout = KBD_TIMEOUT * 1000;
+
+ while ((in8(I8042_STATUS_REG) & I8042_STATUS_IN_DATA) && kbdTimeout--)
+ udelay(1);
+
+ return kbdTimeout != -1;
+}
+
+/******************************************************************************/
+
+static int wait_until_kbd_output_full(void)
+{
+ int kbdTimeout = KBD_TIMEOUT * 1000;
- /* wait for input buf empty */
- while ((in8(I8042_STATUS_REG) & 0x02) && kbdTimeout--)
- udelay(1000);
+ while (((in8(I8042_STATUS_REG) & 0x01) == 0) && kbdTimeout--)
+ udelay(1);
return kbdTimeout != -1;
}
static int kbd_reset(void)
{
+ /* KB Reset */
if (kbd_input_empty() == 0)
return -1;
out8(I8042_DATA_REG, 0xff);
- udelay(250000);
+ if (wait_until_kbd_output_full() == 0)
+ return -1;
+
+ if (in8(I8042_DATA_REG) != 0xfa) /* ACK */
+ return -1;
+
+ if (wait_until_kbd_output_full() == 0)
+ return -1;
+
+ if (in8(I8042_DATA_REG) != 0xaa) /* Test Pass*/
+ return -1;
if (kbd_input_empty() == 0)
return -1;
-#ifdef CONFIG_USE_CPCIDVI
+ /* Set KBC mode */
out8(I8042_COMMAND_REG, 0x60);
-#else
- out8(I8042_DATA_REG, 0x60);
-#endif
if (kbd_input_empty() == 0)
return -1;
out8(I8042_DATA_REG, 0x45);
-
if (kbd_input_empty() == 0)
return -1;
+ /* Enable Keyboard */
out8(I8042_COMMAND_REG, 0xae);
if (kbd_input_empty() == 0)
'\r', 0xff, 0xff
};
+/*
+ * Scan key code to ANSI 3.64 escape sequence table. This table is
+ * incomplete in that it does not include all possible extra keys.
+ */
+static struct {
+ int kbd_scan_code;
+ char *escape;
+} kbd_to_ansi364[] = {
+ { KEY_UP, "\033[A"},
+ { KEY_DOWN, "\033[B"},
+ { KEY_RIGHT, "\033[C"},
+ { KEY_LEFT, "\033[D"},
+};
+
+/* Maximum number of output characters that an ANSI sequence expands to */
+#define ANSI_CHAR_MAX 3
-int input_queue_ascii(struct input_config *config, int ch)
+static int input_queue_ascii(struct input_config *config, int ch)
{
if (config->fifo_in + 1 == INPUT_BUFFER_LEN) {
if (!config->fifo_out)
}
/**
+ * Checks and converts a special key code into ANSI 3.64 escape sequence.
+ *
+ * @param config Input state
+ * @param keycode Key code to examine
+ * @param output_ch Buffer to place output characters into. It should
+ * be at least ANSI_CHAR_MAX bytes long, to allow for
+ * an ANSI sequence.
+ * @param max_chars Maximum number of characters to add to output_ch
+ * @return number of characters output, if the key was converted, otherwise 0.
+ * This may be larger than max_chars, in which case the overflow
+ * characters are not output.
+ */
+static int input_keycode_to_ansi364(struct input_config *config,
+ int keycode, char output_ch[], int max_chars)
+{
+ const char *escape;
+ int ch_count;
+ int i;
+
+ for (i = ch_count = 0; i < ARRAY_SIZE(kbd_to_ansi364); i++) {
+ if (keycode != kbd_to_ansi364[i].kbd_scan_code)
+ continue;
+ for (escape = kbd_to_ansi364[i].escape; *escape; escape++) {
+ if (ch_count < max_chars)
+ output_ch[ch_count] = *escape;
+ ch_count++;
+ }
+ return ch_count;
+ }
+
+ return 0;
+}
+
+/**
+ * Converts and queues a list of key codes in escaped ASCII string form
* Convert a list of key codes into ASCII
*
* You must call input_check_keycodes() before this. It turns the keycode
- * list into a list of ASCII characters which are ready to send to the
- * input layer.
+ * list into a list of ASCII characters and sends them to the input layer.
*
* Characters which were seen last time do not generate fresh ASCII output.
+ * The output (calls to queue_ascii) may be longer than num_keycodes, if the
+ * keycode contains special keys that was encoded to longer escaped sequence.
*
* @param config Input state
* @param keycode List of key codes to examine
* @param num_keycodes Number of key codes
+ * @param output_ch Buffer to place output characters into. It should
+ * be at last ANSI_CHAR_MAX * num_keycodes, to allow for
+ * ANSI sequences.
+ * @param max_chars Maximum number of characters to add to output_ch
* @param same Number of key codes which are the same
+ * @return number of characters written into output_ch, or -1 if we would
+ * exceed max_chars chars.
*/
static int input_keycodes_to_ascii(struct input_config *config,
- int keycode[], int num_keycodes, char output_ch[], int same)
+ int keycode[], int num_keycodes, char output_ch[],
+ int max_chars, int same)
{
struct input_key_xlate *table;
- int ch_count;
+ int ch_count = 0;
int i;
table = &config->table[0];
}
}
- /* now find normal keys */
- for (i = ch_count = 0; i < num_keycodes; i++) {
+ /* Start conversion by looking for the first new keycode (by same). */
+ for (i = same; i < num_keycodes; i++) {
int key = keycode[i];
+ int ch = (key < table->num_entries) ? table->xlate[key] : 0xff;
- if (key < table->num_entries && i >= same) {
- int ch = table->xlate[key];
-
- /* If a normal key with an ASCII value, add it! */
- if (ch != 0xff)
- output_ch[ch_count++] = (uchar)ch;
+ /*
+ * For a normal key (with an ASCII value), add it; otherwise
+ * translate special key to escape sequence if possible.
+ */
+ if (ch != 0xff) {
+ if (ch_count < max_chars)
+ output_ch[ch_count] = (uchar)ch;
+ ch_count++;
+ } else {
+ ch_count += input_keycode_to_ansi364(config, key,
+ output_ch, max_chars);
}
}
+ if (ch_count > max_chars) {
+ debug("%s: Output char buffer overflow size=%d, need=%d\n",
+ __func__, max_chars, ch_count);
+ return -1;
+ }
+
/* ok, so return keys */
return ch_count;
}
int input_send_keycodes(struct input_config *config,
int keycode[], int num_keycodes)
{
- char ch[num_keycodes];
+ char ch[num_keycodes * ANSI_CHAR_MAX];
int count, i, same = 0;
int is_repeat = 0;
unsigned delay_ms;
}
count = input_keycodes_to_ascii(config, keycode, num_keycodes,
- ch, is_repeat ? 0 : same);
+ ch, sizeof(ch), is_repeat ? 0 : same);
for (i = 0; i < count; i++)
input_queue_ascii(config, ch[i]);
delay_ms = is_repeat ?
config->repeat_delay_ms;
config->next_repeat_ms = get_timer(0) + delay_ms;
- return 0;
+
+ return count;
}
int input_add_table(struct input_config *config, int left_keycode,
COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o
COBJS-$(CONFIG_MXS_MMC) += mxsmmc.o
COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
-COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o
COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o
COBJS-$(CONFIG_SDHCI) += sdhci.o
COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o
COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o
COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
+COBJS-$(CONFIG_DWMMC) += dw_mmc.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
--- /dev/null
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ * Rajeshawari Shinde <rajeshwari.s@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <dwmmc.h>
+#include <asm/arch/clk.h>
+#include <asm-generic/errno.h>
+
+#define PAGE_SIZE 4096
+
+static int dwmci_wait_reset(struct dwmci_host *host, u32 value)
+{
+ unsigned long timeout = 1000;
+ u32 ctrl;
+
+ dwmci_writel(host, DWMCI_CTRL, value);
+
+ while (timeout--) {
+ ctrl = dwmci_readl(host, DWMCI_CTRL);
+ if (!(ctrl & DWMCI_RESET_ALL))
+ return 1;
+ }
+ return 0;
+}
+
+static void dwmci_set_idma_desc(struct dwmci_idmac *idmac,
+ u32 desc0, u32 desc1, u32 desc2)
+{
+ struct dwmci_idmac *desc = idmac;
+
+ desc->flags = desc0;
+ desc->cnt = desc1;
+ desc->addr = desc2;
+ desc->next_addr = (unsigned int)desc + sizeof(struct dwmci_idmac);
+}
+
+static void dwmci_prepare_data(struct dwmci_host *host,
+ struct mmc_data *data)
+{
+ unsigned long ctrl;
+ unsigned int i = 0, flags, cnt, blk_cnt;
+ ulong data_start, data_end, start_addr;
+ ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac, data->blocks);
+
+
+ blk_cnt = data->blocks;
+
+ dwmci_wait_reset(host, DWMCI_CTRL_FIFO_RESET);
+
+ data_start = (ulong)cur_idmac;
+ dwmci_writel(host, DWMCI_DBADDR, (unsigned int)cur_idmac);
+
+ if (data->flags == MMC_DATA_READ)
+ start_addr = (unsigned int)data->dest;
+ else
+ start_addr = (unsigned int)data->src;
+
+ do {
+ flags = DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH ;
+ flags |= (i == 0) ? DWMCI_IDMAC_FS : 0;
+ if (blk_cnt <= 8) {
+ flags |= DWMCI_IDMAC_LD;
+ cnt = data->blocksize * blk_cnt;
+ } else
+ cnt = data->blocksize * 8;
+
+ dwmci_set_idma_desc(cur_idmac, flags, cnt,
+ start_addr + (i * PAGE_SIZE));
+
+ if(blk_cnt < 8)
+ break;
+ blk_cnt -= 8;
+ cur_idmac++;
+ i++;
+ } while(1);
+
+ data_end = (ulong)cur_idmac;
+ flush_dcache_range(data_start, data_end + ARCH_DMA_MINALIGN);
+
+ ctrl = dwmci_readl(host, DWMCI_CTRL);
+ ctrl |= DWMCI_IDMAC_EN | DWMCI_DMA_EN;
+ dwmci_writel(host, DWMCI_CTRL, ctrl);
+
+ ctrl = dwmci_readl(host, DWMCI_BMOD);
+ ctrl |= DWMCI_BMOD_IDMAC_FB | DWMCI_BMOD_IDMAC_EN;
+ dwmci_writel(host, DWMCI_BMOD, ctrl);
+
+ dwmci_writel(host, DWMCI_BLKSIZ, data->blocksize);
+ dwmci_writel(host, DWMCI_BYTCNT, data->blocksize * data->blocks);
+}
+
+static int dwmci_set_transfer_mode(struct dwmci_host *host,
+ struct mmc_data *data)
+{
+ unsigned long mode;
+
+ mode = DWMCI_CMD_DATA_EXP;
+ if (data->flags & MMC_DATA_WRITE)
+ mode |= DWMCI_CMD_RW;
+
+ return mode;
+}
+
+static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
+ int flags = 0, i;
+ unsigned int timeout = 100000;
+ u32 retry = 10000;
+ u32 mask, ctrl;
+
+ while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
+ if (timeout == 0) {
+ printf("Timeout on data busy\n");
+ return TIMEOUT;
+ }
+ timeout--;
+ }
+
+ dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
+
+ if (data)
+ dwmci_prepare_data(host, data);
+
+
+ dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
+
+ if (data)
+ flags = dwmci_set_transfer_mode(host, data);
+
+ if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
+ return -1;
+
+ if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
+ flags |= DWMCI_CMD_ABORT_STOP;
+ else
+ flags |= DWMCI_CMD_PRV_DAT_WAIT;
+
+ if (cmd->resp_type & MMC_RSP_PRESENT) {
+ flags |= DWMCI_CMD_RESP_EXP;
+ if (cmd->resp_type & MMC_RSP_136)
+ flags |= DWMCI_CMD_RESP_LENGTH;
+ }
+
+ if (cmd->resp_type & MMC_RSP_CRC)
+ flags |= DWMCI_CMD_CHECK_CRC;
+
+ flags |= (cmd->cmdidx | DWMCI_CMD_START | DWMCI_CMD_USE_HOLD_REG);
+
+ debug("Sending CMD%d\n",cmd->cmdidx);
+
+ dwmci_writel(host, DWMCI_CMD, flags);
+
+ for (i = 0; i < retry; i++) {
+ mask = dwmci_readl(host, DWMCI_RINTSTS);
+ if (mask & DWMCI_INTMSK_CDONE) {
+ if (!data)
+ dwmci_writel(host, DWMCI_RINTSTS, mask);
+ break;
+ }
+ }
+
+ if (i == retry)
+ return TIMEOUT;
+
+ if (mask & DWMCI_INTMSK_RTO) {
+ debug("Response Timeout..\n");
+ return TIMEOUT;
+ } else if (mask & DWMCI_INTMSK_RE) {
+ debug("Response Error..\n");
+ return -1;
+ }
+
+
+ if (cmd->resp_type & MMC_RSP_PRESENT) {
+ if (cmd->resp_type & MMC_RSP_136) {
+ cmd->response[0] = dwmci_readl(host, DWMCI_RESP3);
+ cmd->response[1] = dwmci_readl(host, DWMCI_RESP2);
+ cmd->response[2] = dwmci_readl(host, DWMCI_RESP1);
+ cmd->response[3] = dwmci_readl(host, DWMCI_RESP0);
+ } else {
+ cmd->response[0] = dwmci_readl(host, DWMCI_RESP0);
+ }
+ }
+
+ if (data) {
+ do {
+ mask = dwmci_readl(host, DWMCI_RINTSTS);
+ if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) {
+ debug("DATA ERROR!\n");
+ return -1;
+ }
+ } while (!(mask & DWMCI_INTMSK_DTO));
+
+ dwmci_writel(host, DWMCI_RINTSTS, mask);
+
+ ctrl = dwmci_readl(host, DWMCI_CTRL);
+ ctrl &= ~(DWMCI_DMA_EN);
+ dwmci_writel(host, DWMCI_CTRL, ctrl);
+ }
+
+ udelay(100);
+
+ return 0;
+}
+
+static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
+{
+ u32 div, status;
+ int timeout = 10000;
+ unsigned long sclk;
+
+ if (freq == host->clock)
+ return 0;
+
+ /*
+ * If host->mmc_clk didn't define,
+ * then assume that host->bus_hz is source clock value.
+ * host->bus_hz should be set from user.
+ */
+ if (host->mmc_clk)
+ sclk = host->mmc_clk(host->dev_index);
+ else if (host->bus_hz)
+ sclk = host->bus_hz;
+ else {
+ printf("Didn't get source clock value..\n");
+ return -EINVAL;
+ }
+
+ div = DIV_ROUND_UP(sclk, 2 * freq);
+
+ dwmci_writel(host, DWMCI_CLKENA, 0);
+ dwmci_writel(host, DWMCI_CLKSRC, 0);
+
+ dwmci_writel(host, DWMCI_CLKDIV, div);
+ dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT |
+ DWMCI_CMD_UPD_CLK | DWMCI_CMD_START);
+
+ do {
+ status = dwmci_readl(host, DWMCI_CMD);
+ if (timeout-- < 0) {
+ printf("TIMEOUT error!!\n");
+ return -ETIMEDOUT;
+ }
+ } while (status & DWMCI_CMD_START);
+
+ dwmci_writel(host, DWMCI_CLKENA, DWMCI_CLKEN_ENABLE |
+ DWMCI_CLKEN_LOW_PWR);
+
+ dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT |
+ DWMCI_CMD_UPD_CLK | DWMCI_CMD_START);
+
+ timeout = 10000;
+ do {
+ status = dwmci_readl(host, DWMCI_CMD);
+ if (timeout-- < 0) {
+ printf("TIMEOUT error!!\n");
+ return -ETIMEDOUT;
+ }
+ } while (status & DWMCI_CMD_START);
+
+ host->clock = freq;
+
+ return 0;
+}
+
+static void dwmci_set_ios(struct mmc *mmc)
+{
+ struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
+ u32 ctype;
+
+ debug("Buswidth = %d, clock: %d\n",mmc->bus_width, mmc->clock);
+
+ dwmci_setup_bus(host, mmc->clock);
+ switch (mmc->bus_width) {
+ case 8:
+ ctype = DWMCI_CTYPE_8BIT;
+ break;
+ case 4:
+ ctype = DWMCI_CTYPE_4BIT;
+ break;
+ default:
+ ctype = DWMCI_CTYPE_1BIT;
+ break;
+ }
+
+ dwmci_writel(host, DWMCI_CTYPE, ctype);
+
+ if (host->clksel)
+ host->clksel(host);
+}
+
+static int dwmci_init(struct mmc *mmc)
+{
+ struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
+ u32 fifo_size, fifoth_val;
+
+ dwmci_writel(host, DWMCI_PWREN, 1);
+
+ if (!dwmci_wait_reset(host, DWMCI_RESET_ALL)) {
+ debug("%s[%d] Fail-reset!!\n",__func__,__LINE__);
+ return -1;
+ }
+
+ dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
+ dwmci_writel(host, DWMCI_INTMASK, 0);
+
+ dwmci_writel(host, DWMCI_TMOUT, 0xFFFFFFFF);
+
+ dwmci_writel(host, DWMCI_IDINTEN, 0);
+ dwmci_writel(host, DWMCI_BMOD, 1);
+
+ fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
+ if (host->fifoth_val)
+ fifoth_val = host->fifoth_val;
+ else
+ fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) |
+ TX_WMARK(fifo_size/2);
+ dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
+
+ dwmci_writel(host, DWMCI_CLKENA, 0);
+ dwmci_writel(host, DWMCI_CLKSRC, 0);
+
+ return 0;
+}
+
+int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk)
+{
+ struct mmc *mmc;
+ int err = 0;
+
+ mmc = malloc(sizeof(struct mmc));
+ if (!mmc) {
+ printf("mmc malloc fail!\n");
+ return -1;
+ }
+
+ mmc->priv = host;
+ host->mmc = mmc;
+
+ sprintf(mmc->name, "%s", host->name);
+ mmc->send_cmd = dwmci_send_cmd;
+ mmc->set_ios = dwmci_set_ios;
+ mmc->init = dwmci_init;
+ mmc->f_min = min_clk;
+ mmc->f_max = max_clk;
+
+ mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+
+ mmc->host_caps = host->caps;
+
+ if (host->buswidth == 8) {
+ mmc->host_caps |= MMC_MODE_8BIT;
+ mmc->host_caps &= ~MMC_MODE_4BIT;
+ } else {
+ mmc->host_caps |= MMC_MODE_4BIT;
+ mmc->host_caps &= ~MMC_MODE_8BIT;
+ }
+ mmc->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_HC;
+
+ err = mmc_register(mmc);
+
+ return err;
+}
};
/* Return the XFERTYP flags for a given command and data packet */
-uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
+static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
{
uint xfertyp = 0;
| MMCI_BF(BLKLEN, blklen)
| MMCI_BIT(RDPROOF)
| MMCI_BIT(WRPROOF)), &mci->mr);
+ /*
+ * On some new platforms BLKLEN in mci->mr is ignored.
+ * Should use the BLKLEN in the block register.
+ */
+ writel(MMCI_BF(BLKLEN, blklen), &mci->blkr);
initialized = 1;
}
/* Figure out the transfer arguments */
cmdr = mci_encode_cmd(cmd, data, &error_flags);
+ /* For multi blocks read/write, set the block register */
+ if ((cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK)
+ || (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK))
+ writel(data->blocks | MMCI_BF(BLKLEN, mmc->read_bl_len),
+ &mci->blkr);
+
/* Send the command */
writel(cmd->cmdarg, &mci->argr);
writel(cmdr, &mci->cmdr);
writel(MMCI_BIT(MCIEN), &mci->cr); /* enable mci */
writel(MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr); /* select port */
- /* Initial Time-outs */
- writel(0x5f, &mci->dtor);
+ /* This delay can be optimized, but stick with max value */
+ writel(0x7f, &mci->dtor);
/* Disable Interrupts */
writel(~0UL, &mci->idr);
int board_mmc_getcd(struct mmc *mmc)__attribute__((weak,
alias("__board_mmc_getcd")));
-#ifdef CONFIG_MMC_BOUNCE_BUFFER
-static int mmc_bounce_need_bounce(struct mmc_data *orig)
-{
- ulong addr, len;
-
- if (orig->flags & MMC_DATA_READ)
- addr = (ulong)orig->dest;
- else
- addr = (ulong)orig->src;
-
- if (addr % ARCH_DMA_MINALIGN) {
- debug("MMC: Unaligned data destination address %08lx!\n", addr);
- return 1;
- }
-
- len = (ulong)(orig->blocksize * orig->blocks);
- if (len % ARCH_DMA_MINALIGN) {
- debug("MMC: Unaligned data destination length %08lx!\n", len);
- return 1;
- }
-
- return 0;
-}
-
-static int mmc_bounce_buffer_start(struct mmc_data *backup,
- struct mmc_data *orig)
-{
- ulong origlen, len;
- void *buffer;
-
- if (!orig)
- return 0;
-
- if (!mmc_bounce_need_bounce(orig))
- return 0;
-
- memcpy(backup, orig, sizeof(struct mmc_data));
-
- origlen = orig->blocksize * orig->blocks;
- len = roundup(origlen, ARCH_DMA_MINALIGN);
- buffer = memalign(ARCH_DMA_MINALIGN, len);
- if (!buffer) {
- puts("MMC: Error allocating MMC bounce buffer!\n");
- return 1;
- }
-
- if (orig->flags & MMC_DATA_READ) {
- orig->dest = buffer;
- } else {
- memcpy(buffer, orig->src, origlen);
- orig->src = buffer;
- }
-
- return 0;
-}
-
-static void mmc_bounce_buffer_stop(struct mmc_data *backup,
- struct mmc_data *orig)
-{
- ulong len;
-
- if (!orig)
- return;
-
- if (!mmc_bounce_need_bounce(backup))
- return;
-
- if (backup->flags & MMC_DATA_READ) {
- len = backup->blocksize * backup->blocks;
- memcpy(backup->dest, orig->dest, len);
- free(orig->dest);
- orig->dest = backup->dest;
- } else {
- free((void *)orig->src);
- orig->src = backup->src;
- }
-
- return;
-
-}
-#else
-static inline int mmc_bounce_buffer_start(struct mmc_data *backup,
- struct mmc_data *orig) { return 0; }
-static inline void mmc_bounce_buffer_stop(struct mmc_data *backup,
- struct mmc_data *orig) { }
-#endif
-
-int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
+static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data)
{
struct mmc_data backup;
int ret;
memset(&backup, 0, sizeof(backup));
- ret = mmc_bounce_buffer_start(&backup, data);
- if (ret)
- return ret;
-
#ifdef CONFIG_MMC_TRACE
int i;
u8 *ptr;
#else
ret = mmc->send_cmd(mmc, cmd, data);
#endif
- mmc_bounce_buffer_stop(&backup, data);
return ret;
}
-int mmc_send_status(struct mmc *mmc, int timeout)
+static int mmc_send_status(struct mmc *mmc, int timeout)
{
struct mmc_cmd cmd;
int err, retries = 5;
return 0;
}
-int mmc_set_blocklen(struct mmc *mmc, int len)
+static int mmc_set_blocklen(struct mmc *mmc, int len)
{
struct mmc_cmd cmd;
return blkcnt;
}
-int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt)
+static int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start,
+ lbaint_t blkcnt)
{
struct mmc_cmd cmd;
struct mmc_data data;
return blkcnt;
}
-int mmc_go_idle(struct mmc* mmc)
+static int mmc_go_idle(struct mmc *mmc)
{
struct mmc_cmd cmd;
int err;
return 0;
}
-int
-sd_send_op_cond(struct mmc *mmc)
+static int sd_send_op_cond(struct mmc *mmc)
{
int timeout = 1000;
int err;
return 0;
}
-int mmc_send_op_cond(struct mmc *mmc)
+static int mmc_send_op_cond(struct mmc *mmc)
{
int timeout = 10000;
struct mmc_cmd cmd;
}
-int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd)
+static int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd)
{
struct mmc_cmd cmd;
struct mmc_data data;
}
-int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value)
+static int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value)
{
struct mmc_cmd cmd;
int timeout = 1000;
}
-int mmc_change_freq(struct mmc *mmc)
+static int mmc_change_freq(struct mmc *mmc)
{
ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, 512);
char cardtype;
return cd;
}
-int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp)
+static int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp)
{
struct mmc_cmd cmd;
struct mmc_data data;
}
-int sd_change_freq(struct mmc *mmc)
+static int sd_change_freq(struct mmc *mmc)
{
int err;
struct mmc_cmd cmd;
80,
};
-void mmc_set_ios(struct mmc *mmc)
+static void mmc_set_ios(struct mmc *mmc)
{
mmc->set_ios(mmc);
}
mmc_set_ios(mmc);
}
-void mmc_set_bus_width(struct mmc *mmc, uint width)
+static void mmc_set_bus_width(struct mmc *mmc, uint width)
{
mmc->bus_width = width;
mmc_set_ios(mmc);
}
-int mmc_startup(struct mmc *mmc)
+static int mmc_startup(struct mmc *mmc)
{
int err, width;
uint mult, freq;
if (!IS_SD(mmc) && (mmc->version >= MMC_VERSION_4)) {
/* check ext_csd version and capacity */
err = mmc_send_ext_csd(mmc, ext_csd);
- if (!err & (ext_csd[EXT_CSD_REV] >= 2)) {
+ if (!err && (ext_csd[EXT_CSD_REV] >= 2)) {
/*
* According to the JEDEC Standard, the value of
* ext_csd's capacity is valid if the value is more
return 0;
}
-int mmc_send_if_cond(struct mmc *mmc)
+static int mmc_send_if_cond(struct mmc *mmc)
{
struct mmc_cmd cmd;
int err;
u8 r1;
int i;
int ret = 0;
- debug("%s:cmd%d %x %x %x\n", __func__,
- cmd->cmdidx, cmd->resp_type, cmd->cmdarg, cmd->flags);
+ debug("%s:cmd%d %x %x\n", __func__,
+ cmd->cmdidx, cmd->resp_type, cmd->cmdarg);
spi_claim_bus(spi);
spi_cs_activate(spi);
r1 = mmc_spi_sendcmd(mmc, cmd->cmdidx, cmd->cmdarg);
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/dma.h>
+#include <bouncebuf.h>
struct mxsmmc_priv {
int id;
static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data)
{
uint32_t data_count = data->blocksize * data->blocks;
- uint32_t cache_data_count;
+ uint32_t cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN);
int dmach;
struct mxs_dma_desc *desc = priv->desc;
+ void *addr, *backup;
+ uint8_t flags;
memset(desc, 0, sizeof(struct mxs_dma_desc));
desc->address = (dma_addr_t)desc;
- if (data_count % ARCH_DMA_MINALIGN)
- cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN);
- else
- cache_data_count = data_count;
-
if (data->flags & MMC_DATA_READ) {
priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE;
- priv->desc->cmd.address = (dma_addr_t)data->dest;
+ addr = data->dest;
+ flags = GEN_BB_WRITE;
} else {
priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ;
- priv->desc->cmd.address = (dma_addr_t)data->src;
+ addr = (void *)data->src;
+ flags = GEN_BB_READ;
+ }
+
+ bounce_buffer_start(&addr, data_count, &backup, flags);
+
+ priv->desc->cmd.address = (dma_addr_t)addr;
+ if (data->flags & MMC_DATA_WRITE) {
/* Flush data to DRAM so DMA can pick them up */
- flush_dcache_range((uint32_t)priv->desc->cmd.address,
- (uint32_t)(priv->desc->cmd.address + cache_data_count));
+ flush_dcache_range((uint32_t)addr,
+ (uint32_t)(addr) + cache_data_count);
}
/* Invalidate the area, so no writeback into the RAM races with DMA */
dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id;
mxs_dma_desc_append(dmach, priv->desc);
- if (mxs_dma_go(dmach))
+ if (mxs_dma_go(dmach)) {
+ bounce_buffer_stop(&addr, data_count, &backup, flags);
return COMM_ERR;
+ }
/* The data arrived into DRAM, invalidate cache over them */
if (data->flags & MMC_DATA_READ) {
- invalidate_dcache_range((uint32_t)priv->desc->cmd.address,
- (uint32_t)(priv->desc->cmd.address + cache_data_count));
+ invalidate_dcache_range((uint32_t)addr,
+ (uint32_t)(addr) + cache_data_count);
}
+ bounce_buffer_stop(&addr, data_count, &backup, flags);
+
return 0;
}
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <mmc.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-#include <part.h>
-#include <asm/io.h>
-
-#include "pxa_mmc.h"
-
-extern int fat_register_device(block_dev_desc_t * dev_desc, int part_no);
-
-static block_dev_desc_t mmc_dev;
-
-block_dev_desc_t *mmc_get_dev(int dev)
-{
- return ((block_dev_desc_t *) & mmc_dev);
-}
-
-/*
- * FIXME needs to read cid and csd info to determine block size
- * and other parameters
- */
-static uchar mmc_buf[MMC_BLOCK_SIZE];
-static uchar spec_ver;
-static int mmc_ready = 0;
-static int wide = 0;
-
-static uint32_t *
-/****************************************************/
-mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat)
-/****************************************************/
-{
- static uint32_t resp[4], a, b, c;
- uint32_t status;
- int i;
-
- debug("mmc_cmd %u 0x%04x 0x%04x 0x%04x\n", cmd, argh, argl,
- cmdat | wide);
- writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
- writel(~MMC_I_MASK_CLK_IS_OFF, MMC_I_MASK);
- while (!(readl(MMC_I_REG) & MMC_I_REG_CLK_IS_OFF))
- ;
- writel(cmd, MMC_CMD);
- writel(argh, MMC_ARGH);
- writel(argl, MMC_ARGL);
- writel(cmdat | wide, MMC_CMDAT);
- writel(~MMC_I_MASK_END_CMD_RES, MMC_I_MASK);
- writel(MMC_STRPCL_START_CLK, MMC_STRPCL);
- while (!(readl(MMC_I_REG) & MMC_I_REG_END_CMD_RES))
- ;
-
- status = readl(MMC_STAT);
- debug("MMC status 0x%08x\n", status);
- if (status & MMC_STAT_TIME_OUT_RESPONSE) {
- return 0;
- }
-
- /* Linux says:
- * Did I mention this is Sick. We always need to
- * discard the upper 8 bits of the first 16-bit word.
- */
- a = (readl(MMC_RES) & 0xffff);
- for (i = 0; i < 4; i++) {
- b = (readl(MMC_RES) & 0xffff);
- c = (readl(MMC_RES) & 0xffff);
- resp[i] = (a << 24) | (b << 8) | (c >> 8);
- a = c;
- debug("MMC resp[%d] = %#08x\n", i, resp[i]);
- }
-
- return resp;
-}
-
-int
-/****************************************************/
-mmc_block_read(uchar * dst, uint32_t src, int len)
-/****************************************************/
-{
- ushort argh, argl;
- ulong status;
-
- if (len == 0) {
- return 0;
- }
-
- debug("mmc_block_rd dst %p src %08x len %d\n", dst, src, len);
-
- argh = len >> 16;
- argl = len & 0xffff;
-
- /* set block len */
- mmc_cmd(MMC_CMD_SET_BLOCKLEN, argh, argl, MMC_CMDAT_R1);
-
- /* send read command */
- argh = src >> 16;
- argl = src & 0xffff;
- writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
- writel(0xffff, MMC_RDTO);
- writel(1, MMC_NOB);
- writel(len, MMC_BLKLEN);
- mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK, argh, argl,
- MMC_CMDAT_R1 | MMC_CMDAT_READ | MMC_CMDAT_BLOCK |
- MMC_CMDAT_DATA_EN);
-
- writel(~MMC_I_MASK_RXFIFO_RD_REQ, MMC_I_MASK);
- while (len) {
- if (readl(MMC_I_REG) & MMC_I_REG_RXFIFO_RD_REQ) {
-#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
- int i;
- for (i = min(len, 32); i; i--) {
- *dst++ = readb(MMC_RXFIFO);
- len--;
- }
-#else
- *dst++ = readb(MMC_RXFIFO);
- len--;
-#endif
- }
- status = readl(MMC_STAT);
- if (status & MMC_STAT_ERRORS) {
- printf("MMC_STAT error %lx\n", status);
- return -1;
- }
- }
- writel(~MMC_I_MASK_DATA_TRAN_DONE, MMC_I_MASK);
- while (!(readl(MMC_I_REG) & MMC_I_REG_DATA_TRAN_DONE))
- ;
- status = readl(MMC_STAT);
- if (status & MMC_STAT_ERRORS) {
- printf("MMC_STAT error %lx\n", status);
- return -1;
- }
- return 0;
-}
-
-int
-/****************************************************/
-mmc_block_write(ulong dst, uchar * src, int len)
-/****************************************************/
-{
- ushort argh, argl;
- ulong status;
-
- if (len == 0) {
- return 0;
- }
-
- debug("mmc_block_wr dst %lx src %lx len %d\n", dst, (ulong) src, len);
-
- argh = len >> 16;
- argl = len & 0xffff;
-
- /* set block len */
- mmc_cmd(MMC_CMD_SET_BLOCKLEN, argh, argl, MMC_CMDAT_R1);
-
- /* send write command */
- argh = dst >> 16;
- argl = dst & 0xffff;
- writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
- writel(1, MMC_NOB);
- writel(len, MMC_BLKLEN);
- mmc_cmd(MMC_CMD_WRITE_SINGLE_BLOCK, argh, argl,
- MMC_CMDAT_R1 | MMC_CMDAT_WRITE | MMC_CMDAT_BLOCK |
- MMC_CMDAT_DATA_EN);
-
- writel(~MMC_I_MASK_TXFIFO_WR_REQ, MMC_I_MASK);
- while (len) {
- if (readl(MMC_I_REG) & MMC_I_REG_TXFIFO_WR_REQ) {
- int i, bytes = min(32, len);
-
- for (i = 0; i < bytes; i++) {
- writel(*src++, MMC_TXFIFO);
- }
- if (bytes < 32) {
- writel(MMC_PRTBUF_BUF_PART_FULL, MMC_PRTBUF);
- }
- len -= bytes;
- }
- status = readl(MMC_STAT);
- if (status & MMC_STAT_ERRORS) {
- printf("MMC_STAT error %lx\n", status);
- return -1;
- }
- }
- writel(~MMC_I_MASK_DATA_TRAN_DONE, MMC_I_MASK);
- while (!(readl(MMC_I_REG) & MMC_I_REG_DATA_TRAN_DONE))
- ;
- writel(~MMC_I_MASK_PRG_DONE, MMC_I_MASK);
- while (!(readl(MMC_I_REG) & MMC_I_REG_PRG_DONE))
- ;
- status = readl(MMC_STAT);
- if (status & MMC_STAT_ERRORS) {
- printf("MMC_STAT error %lx\n", status);
- return -1;
- }
- return 0;
-}
-
-int
-/****************************************************/
-pxa_mmc_read(long src, uchar * dst, int size)
-/****************************************************/
-{
- ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
- ulong mmc_block_size, mmc_block_address;
-
- if (size == 0) {
- return 0;
- }
-
- if (!mmc_ready) {
- printf("Please initial the MMC first\n");
- return -1;
- }
-
- mmc_block_size = MMC_BLOCK_SIZE;
- mmc_block_address = ~(mmc_block_size - 1);
-
- src -= CONFIG_SYS_MMC_BASE;
- end = src + size;
- part_start = ~mmc_block_address & src;
- part_end = ~mmc_block_address & end;
- aligned_start = mmc_block_address & src;
- aligned_end = mmc_block_address & end;
-
- /* all block aligned accesses */
- debug
- ("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong) dst, end, part_start, part_end, aligned_start,
- aligned_end);
- if (part_start) {
- part_len = mmc_block_size - part_start;
- debug
- ("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong) dst, end, part_start, part_end, aligned_start,
- aligned_end);
- if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) <
- 0) {
- return -1;
- }
- memcpy(dst, mmc_buf + part_start, part_len);
- dst += part_len;
- src += part_len;
- }
- debug
- ("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong) dst, end, part_start, part_end, aligned_start,
- aligned_end);
- for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
- debug
- ("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong) dst, end, part_start, part_end, aligned_start,
- aligned_end);
- if ((mmc_block_read((uchar *) (dst), src, mmc_block_size)) < 0) {
- return -1;
- }
- }
- debug
- ("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong) dst, end, part_start, part_end, aligned_start,
- aligned_end);
- if (part_end && src < end) {
- debug
- ("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, (ulong) dst, end, part_start, part_end, aligned_start,
- aligned_end);
- if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
- return -1;
- }
- memcpy(dst, mmc_buf, part_end);
- }
- return 0;
-}
-
-int
-/****************************************************/
-pxa_mmc_write(uchar * src, uint32_t dst, int size)
-/****************************************************/
-{
- ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
- ulong mmc_block_size, mmc_block_address;
-
- if (size == 0) {
- return 0;
- }
-
- if (!mmc_ready) {
- printf("Please initial the MMC first\n");
- return -1;
- }
-
- mmc_block_size = MMC_BLOCK_SIZE;
- mmc_block_address = ~(mmc_block_size - 1);
-
- dst -= CONFIG_SYS_MMC_BASE;
- end = dst + size;
- part_start = ~mmc_block_address & dst;
- part_end = ~mmc_block_address & end;
- aligned_start = mmc_block_address & dst;
- aligned_end = mmc_block_address & end;
-
- /* all block aligned accesses */
- debug
- ("src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, dst, end, part_start, part_end, aligned_start,
- aligned_end);
- if (part_start) {
- part_len = mmc_block_size - part_start;
- debug
- ("ps src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, dst, end, part_start, part_end, aligned_start,
- aligned_end);
- if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) <
- 0) {
- return -1;
- }
- memcpy(mmc_buf + part_start, src, part_len);
- if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) <
- 0) {
- return -1;
- }
- dst += part_len;
- src += part_len;
- }
- debug
- ("src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, dst, end, part_start, part_end, aligned_start,
- aligned_end);
- for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
- debug
- ("al src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, dst, end, part_start, part_end, aligned_start,
- aligned_end);
- if ((mmc_block_write(dst, (uchar *) src, mmc_block_size)) < 0) {
- return -1;
- }
- }
- debug
- ("src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, dst, end, part_start, part_end, aligned_start,
- aligned_end);
- if (part_end && dst < end) {
- debug
- ("pe src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n",
- src, dst, end, part_start, part_end, aligned_start,
- aligned_end);
- if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
- return -1;
- }
- memcpy(mmc_buf, src, part_end);
- if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) {
- return -1;
- }
- }
- return 0;
-}
-
-static ulong
-/****************************************************/
-mmc_bread(int dev_num, ulong blknr, lbaint_t blkcnt, void *dst)
-/****************************************************/
-{
- int mmc_block_size = MMC_BLOCK_SIZE;
- ulong src = blknr * mmc_block_size + CONFIG_SYS_MMC_BASE;
-
- pxa_mmc_read(src, (uchar *) dst, blkcnt * mmc_block_size);
- return blkcnt;
-}
-
-#ifdef __GNUC__
-#define likely(x) __builtin_expect(!!(x), 1)
-#define unlikely(x) __builtin_expect(!!(x), 0)
-#else
-#define likely(x) (x)
-#define unlikely(x) (x)
-#endif
-
-#define UNSTUFF_BITS(resp,start,size) \
- ({ \
- const int __size = size; \
- const uint32_t __mask = (__size < 32 ? 1 << __size : 0) - 1; \
- const int32_t __off = 3 - ((start) / 32); \
- const int32_t __shft = (start) & 31; \
- uint32_t __res; \
- \
- __res = resp[__off] >> __shft; \
- if (__size + __shft > 32) \
- __res |= resp[__off-1] << ((32 - __shft) % 32); \
- __res & __mask; \
- })
-
-/*
- * Given the decoded CSD structure, decode the raw CID to our CID structure.
- */
-static void mmc_decode_cid(uint32_t * resp)
-{
- if (IF_TYPE_SD == mmc_dev.if_type) {
- /*
- * SD doesn't currently have a version field so we will
- * have to assume we can parse this.
- */
- sprintf((char *)mmc_dev.vendor,
- "Man %02x OEM %c%c \"%c%c%c%c%c\" Date %02u/%04u",
- UNSTUFF_BITS(resp, 120, 8), UNSTUFF_BITS(resp, 112, 8),
- UNSTUFF_BITS(resp, 104, 8), UNSTUFF_BITS(resp, 96, 8),
- UNSTUFF_BITS(resp, 88, 8), UNSTUFF_BITS(resp, 80, 8),
- UNSTUFF_BITS(resp, 72, 8), UNSTUFF_BITS(resp, 64, 8),
- UNSTUFF_BITS(resp, 8, 4), UNSTUFF_BITS(resp, 12,
- 8) + 2000);
- sprintf((char *)mmc_dev.revision, "%d.%d",
- UNSTUFF_BITS(resp, 60, 4), UNSTUFF_BITS(resp, 56, 4));
- sprintf((char *)mmc_dev.product, "%u",
- UNSTUFF_BITS(resp, 24, 32));
- } else {
- /*
- * The selection of the format here is based upon published
- * specs from sandisk and from what people have reported.
- */
- switch (spec_ver) {
- case 0: /* MMC v1.0 - v1.2 */
- case 1: /* MMC v1.4 */
- sprintf((char *)mmc_dev.vendor,
- "Man %02x%02x%02x \"%c%c%c%c%c%c%c\" Date %02u/%04u",
- UNSTUFF_BITS(resp, 120, 8), UNSTUFF_BITS(resp,
- 112,
- 8),
- UNSTUFF_BITS(resp, 104, 8), UNSTUFF_BITS(resp,
- 96, 8),
- UNSTUFF_BITS(resp, 88, 8), UNSTUFF_BITS(resp,
- 80, 8),
- UNSTUFF_BITS(resp, 72, 8), UNSTUFF_BITS(resp,
- 64, 8),
- UNSTUFF_BITS(resp, 56, 8), UNSTUFF_BITS(resp,
- 48, 8),
- UNSTUFF_BITS(resp, 12, 4), UNSTUFF_BITS(resp, 8,
- 4) +
- 1997);
- sprintf((char *)mmc_dev.revision, "%d.%d",
- UNSTUFF_BITS(resp, 44, 4), UNSTUFF_BITS(resp,
- 40, 4));
- sprintf((char *)mmc_dev.product, "%u",
- UNSTUFF_BITS(resp, 16, 24));
- break;
-
- case 2: /* MMC v2.0 - v2.2 */
- case 3: /* MMC v3.1 - v3.3 */
- case 4: /* MMC v4 */
- sprintf((char *)mmc_dev.vendor,
- "Man %02x OEM %04x \"%c%c%c%c%c%c\" Date %02u/%04u",
- UNSTUFF_BITS(resp, 120, 8), UNSTUFF_BITS(resp,
- 104,
- 16),
- UNSTUFF_BITS(resp, 96, 8), UNSTUFF_BITS(resp,
- 88, 8),
- UNSTUFF_BITS(resp, 80, 8), UNSTUFF_BITS(resp,
- 72, 8),
- UNSTUFF_BITS(resp, 64, 8), UNSTUFF_BITS(resp,
- 56, 8),
- UNSTUFF_BITS(resp, 12, 4), UNSTUFF_BITS(resp, 8,
- 4) +
- 1997);
- sprintf((char *)mmc_dev.product, "%u",
- UNSTUFF_BITS(resp, 16, 32));
- sprintf((char *)mmc_dev.revision, "N/A");
- break;
-
- default:
- printf("MMC card has unknown MMCA version %d\n",
- spec_ver);
- break;
- }
- }
- printf("%s card.\nVendor: %s\nProduct: %s\nRevision: %s\n",
- (IF_TYPE_SD == mmc_dev.if_type) ? "SD" : "MMC", mmc_dev.vendor,
- mmc_dev.product, mmc_dev.revision);
-}
-
-/*
- * Given a 128-bit response, decode to our card CSD structure.
- */
-static void mmc_decode_csd(uint32_t * resp)
-{
- unsigned int mult, csd_struct;
-
- if (IF_TYPE_SD == mmc_dev.if_type) {
- csd_struct = UNSTUFF_BITS(resp, 126, 2);
- if (csd_struct != 0) {
- printf("SD: unrecognised CSD structure version %d\n",
- csd_struct);
- return;
- }
- } else {
- /*
- * We only understand CSD structure v1.1 and v1.2.
- * v1.2 has extra information in bits 15, 11 and 10.
- */
- csd_struct = UNSTUFF_BITS(resp, 126, 2);
- if (csd_struct != 1 && csd_struct != 2) {
- printf("MMC: unrecognised CSD structure version %d\n",
- csd_struct);
- return;
- }
-
- spec_ver = UNSTUFF_BITS(resp, 122, 4);
- mmc_dev.if_type = IF_TYPE_MMC;
- }
-
- mult = 1 << (UNSTUFF_BITS(resp, 47, 3) + 2);
- mmc_dev.lba = (1 + UNSTUFF_BITS(resp, 62, 12)) * mult;
- mmc_dev.blksz = 1 << UNSTUFF_BITS(resp, 80, 4);
-
- /* FIXME: The following just makes assumes that's the partition type -- should really read it */
- mmc_dev.part_type = PART_TYPE_DOS;
- mmc_dev.dev = 0;
- mmc_dev.lun = 0;
- mmc_dev.type = DEV_TYPE_HARDDISK;
- mmc_dev.removable = 0;
- mmc_dev.block_read = mmc_bread;
-
- printf("Detected: %lu blocks of %lu bytes (%luMB) ",
- mmc_dev.lba,
- mmc_dev.blksz,
- mmc_dev.lba * mmc_dev.blksz / (1024 * 1024));
-}
-
-int
-/****************************************************/
-mmc_legacy_init(int verbose)
-/****************************************************/
-{
- int retries, rc = -ENODEV;
- uint32_t cid_resp[4];
- uint32_t *resp;
- uint16_t rca = 0;
-
- /* Reset device interface type */
- mmc_dev.if_type = IF_TYPE_UNKNOWN;
-
-#ifdef CONFIG_CPU_MONAHANS /* pxa3xx */
- writel(readl(CKENA) | CKENA_12_MMC0 | CKENA_13_MMC1, CKENA);
-#else /* pxa2xx */
- writel(readl(CKEN) | CKEN12_MMC, CKEN); /* enable MMC unit clock */
-#endif
- writel(MMC_CLKRT_0_3125MHZ, MMC_CLKRT);
- writel(MMC_RES_TO_MAX, MMC_RESTO);
- writel(MMC_SPI_DISABLE, MMC_SPI);
-
- /* reset */
- mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, 0, MMC_CMDAT_INIT | MMC_CMDAT_R0);
- udelay(200000);
- retries = 3;
- while (retries--) {
- resp = mmc_cmd(MMC_CMD_APP_CMD, 0, 0, MMC_CMDAT_R1);
- if (!(resp[0] & 0x00000020)) { /* Card does not support APP_CMD */
- debug("Card does not support APP_CMD\n");
- break;
- }
-
- /* Select 3.2-3.3V and 3.3-3.4V */
- resp = mmc_cmd(SD_CMD_APP_SEND_OP_COND, 0x0030, 0x0000,
- MMC_CMDAT_R3 | (retries < 2 ? 0
- : MMC_CMDAT_INIT));
- if (resp[0] & 0x80000000) {
- mmc_dev.if_type = IF_TYPE_SD;
- debug("Detected SD card\n");
- break;
- }
- udelay(200000);
- }
-
- if (retries <= 0 || !(IF_TYPE_SD == mmc_dev.if_type)) {
- debug("Failed to detect SD Card, trying MMC\n");
- resp =
- mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ff, 0x8000, MMC_CMDAT_R3);
-
- retries = 10;
- while (retries-- && resp && !(resp[0] & 0x80000000)) {
- udelay(200000);
- resp =
- mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ff, 0x8000,
- MMC_CMDAT_R3);
- }
- }
-
- /* try to get card id */
- resp =
- mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, 0, MMC_CMDAT_R2 | MMC_CMDAT_BUSY);
- if (resp) {
- memcpy(cid_resp, resp, sizeof(cid_resp));
-
- /* MMC exists, get CSD too */
- resp = mmc_cmd(MMC_CMD_SET_RELATIVE_ADDR, 0, 0, MMC_CMDAT_R1);
- if (IF_TYPE_SD == mmc_dev.if_type)
- rca = ((resp[0] & 0xffff0000) >> 16);
- resp = mmc_cmd(MMC_CMD_SEND_CSD, rca, 0, MMC_CMDAT_R2);
- if (resp) {
- mmc_decode_csd(resp);
- rc = 0;
- mmc_ready = 1;
- }
-
- mmc_decode_cid(cid_resp);
- }
-
- writel(0, MMC_CLKRT); /* 20 MHz */
- resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca, 0, MMC_CMDAT_R1);
-
-#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
- if (IF_TYPE_SD == mmc_dev.if_type) {
- resp = mmc_cmd(MMC_CMD_APP_CMD, rca, 0, MMC_CMDAT_R1);
- resp = mmc_cmd(SD_CMD_APP_SET_BUS_WIDTH, 0, 2, MMC_CMDAT_R1);
- wide = MMC_CMDAT_SD_4DAT;
- }
-#endif
-
- fat_register_device(&mmc_dev, 1); /* partitions start counting with 1 */
-
- return rc;
-}
host->ioaddr = (void *)regbase;
host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE |
- SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR;
+ SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR |
+ SDHCI_QUIRK_WAIT_SEND_CMD;
host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
unsigned int start_addr)
{
unsigned int stat, rdy, mask, timeout, block = 0;
+#ifdef CONFIG_MMC_SDMA
+ unsigned char ctrl;
+ ctrl = sdhci_readl(host, SDHCI_HOST_CONTROL);
+ ctrl &= ~SDHCI_CTRL_DMA_MASK;
+ ctrl |= SDHCI_CTRL_SDMA;
+ sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL);
+#endif
- timeout = 10000;
+ timeout = 1000000;
rdy = SDHCI_INT_SPACE_AVAIL | SDHCI_INT_DATA_AVAIL;
mask = SDHCI_DATA_AVAILABLE | SDHCI_SPACE_AVAILABLE;
do {
if (!ret && data)
ret = sdhci_transfer_data(host, data, start_addr);
+ if (host->quirks & SDHCI_QUIRK_WAIT_SEND_CMD)
+ udelay(1000);
+
stat = sdhci_readl(host, SDHCI_INT_STATUS);
sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS);
if (!ret) {
*/
static flash_sect_t find_sector (flash_info_t * info, ulong addr)
{
- static flash_sect_t saved_sector = 0; /* previously found sector */
- static flash_info_t *saved_info = 0; /* previously used flash bank */
+ static flash_sect_t saved_sector; /* previously found sector */
+ static flash_info_t *saved_info; /* previously used flash bank */
flash_sect_t sector = saved_sector;
if ((info != saved_info) || (sector >= info->sector_count))
}
if (use_flash_status_poll(info)) {
- cfiword_t cword = (cfiword_t)0xffffffffffffffffULL;
+ cfiword_t cword;
void *dest;
+ cword.ll = 0xffffffffffffffffULL;
dest = flash_map(info, sect, 0);
st = flash_status_poll(info, &cword, dest,
info->erase_blk_tout, "erase");
static int cfi_protect_bugfix(flash_info_t *info, long sector, int prot)
{
- if ((info->manufacturer_id == (uchar)INTEL_MANUFACT) &&
- (info->device_id == NUMONYX_256MBIT)) {
+ if (info->manufacturer_id == ((INTEL_MANUFACT & FLASH_VENDMASK) >> 16)
+ && info->device_id == NUMONYX_256MBIT) {
/*
* see errata called
* "Numonyx Axcell P33/P30 Specification Update" :)
case CFI_CMDSET_AMD_EXTENDED:
case CFI_CMDSET_AMD_STANDARD:
/* U-Boot only checks the first byte */
- if (info->manufacturer_id == (uchar)ATM_MANUFACT) {
+ if (info->manufacturer_id ==
+ ((ATM_MANUFACT & FLASH_VENDMASK) >> 16)) {
if (prot) {
flash_unlock_seq (info, 0);
flash_write_cmd (info, 0,
0, ATM_CMD_UNLOCK_SECT);
}
}
- if (info->manufacturer_id == (uchar)AMD_MANUFACT) {
+ if (info->manufacturer_id ==
+ ((AMD_MANUFACT & FLASH_VENDMASK) >> 16)) {
int flag = disable_interrupts();
int lock_flag;
flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
#ifdef CONFIG_SYS_FLASH_PROTECTION
- if (info->ext_addr && info->manufacturer_id == (uchar)AMD_MANUFACT) {
+ if (info->ext_addr && info->manufacturer_id ==
+ ((AMD_MANUFACT & FLASH_VENDMASK) >> 16)) {
ushort spus;
/* read sector protect/unprotect scheme */
p[i] = flash_read_uchar(info, start + i);
}
-void __flash_cmd_reset(flash_info_t *info)
+static void __flash_cmd_reset(flash_info_t *info)
{
/*
* We do not yet know what kind of commandset to use, so we issue
int *maf_id, int *dev_id,
const struct nand_flash_dev *type)
{
+ const char *name;
int i, maf_idx;
u8 id_data[8];
int ret;
chip->cmdfunc = nand_command_lp;
/* TODO onfi flash name */
- MTDDEBUG (MTD_DEBUG_LEVEL0, "NAND device: Manufacturer ID:"
- " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
- nand_manuf_ids[maf_idx].name,
+ name = type->name;
#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
- chip->onfi_version ? chip->onfi_params.model : type->name);
-#else
- type->name);
+ if (chip->onfi_version)
+ name = chip->onfi_params.model;
#endif
+ MTDDEBUG(MTD_DEBUG_LEVEL0, "NAND device: Manufacturer ID:"
+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
+ nand_manuf_ids[maf_idx].name, name);
return type;
}
#include <asm/errno.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand_ecc.h>
/* The PPC4xx NDFC uses Smart Media (SMC) bytes order */
#ifdef CONFIG_NAND_NDFC
return (uint8_t)dword_read;
}
+/**
+ * Read len bytes from the chip into a buffer
+ *
+ * @param mtd MTD device structure
+ * @param buf buffer to store data to
+ * @param len number of bytes to read
+ *
+ * Read function for 8bit bus-width
+ */
+static void read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i, s;
+ unsigned int reg;
+ struct nand_chip *chip = mtd->priv;
+ struct nand_drv *info = (struct nand_drv *)chip->priv;
+
+ for (i = 0; i < len; i += 4) {
+ s = (len - i) > 4 ? 4 : len - i;
+ writel(CMD_PIO | CMD_RX | CMD_A_VALID | CMD_CE0 |
+ ((s - 1) << CMD_TRANS_SIZE_SHIFT) | CMD_GO,
+ &info->reg->command);
+ if (!nand_waitfor_cmd_completion(info->reg))
+ puts("Command timeout during read_buf\n");
+ reg = readl(&info->reg->resp);
+ memcpy(buf + i, ®, s);
+ }
+}
+
/**
* Check NAND status to see if it is ready or not
*
switch (command) {
case NAND_CMD_READID:
writel(NAND_CMD_READID, &info->reg->cmd_reg1);
+ writel(column & 0xFF, &info->reg->addr_reg1);
writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_PIO
| CMD_RX |
((4 - 1) << CMD_TRANS_SIZE_SHIFT)
&info->reg->command);
info->pio_byte_index = 0;
break;
+ case NAND_CMD_PARAM:
+ writel(NAND_CMD_PARAM, &info->reg->cmd_reg1);
+ writel(column & 0xFF, &info->reg->addr_reg1);
+ writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_CE0,
+ &info->reg->command);
+ break;
case NAND_CMD_READ0:
writel(NAND_CMD_READ0, &info->reg->cmd_reg1);
writel(NAND_CMD_READSTART, &info->reg->cmd_reg2);
nand->options = LP_OPTIONS;
nand->cmdfunc = nand_command;
nand->read_byte = read_byte;
+ nand->read_buf = read_buf;
nand->ecc.read_page = nand_read_page_hwecc;
nand->ecc.write_page = nand_write_page_hwecc;
nand->ecc.read_page_raw = nand_read_page_raw;
#include "crc32defs.h"
#define CRC_LE_BITS 8
-# define __force
-#ifndef __constant_cpu_to_le32
-#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
-#endif
-#ifndef __constant_le32_to_cpu
-#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
-#endif
-
#if CRC_LE_BITS == 8
-#define tole(x) __constant_cpu_to_le32(x)
-#define tobe(x) __constant_cpu_to_be32(x)
+#define tole(x) cpu_to_le32(x)
+#define tobe(x) cpu_to_be32(x)
#else
#define tole(x) (x)
#define tobe(x) (x)
COBJS-$(CONFIG_NATSEMI) += natsemi.o
COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o
COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o
-COBJS-$(CONFIG_DRIVER_NETARMETH) += netarm_eth.o
COBJS-$(CONFIG_NETCONSOLE) += netconsole.o
COBJS-$(CONFIG_NS8382X) += ns8382x.o
COBJS-$(CONFIG_PCNET) += pcnet.o
COBJS-y += tgec.o
COBJS-y += tgec_phy.o
+# Soc have FMAN v3 with mEMAC
+COBJS-$(CONFIG_SYS_FMAN_V3) += memac_phy.o
+COBJS-$(CONFIG_SYS_FMAN_V3) += memac.o
+
# SoC specific SERDES support
COBJS-$(CONFIG_P1017) += p1023.o
COBJS-$(CONFIG_P1023) += p1023.o
COBJS-$(CONFIG_PPC_P3041) += p5020.o
COBJS-$(CONFIG_PPC_P4080) += p4080.o
COBJS-$(CONFIG_PPC_P5020) += p5020.o
+COBJS-$(CONFIG_PPC_T4240) += t4240.o
+COBJS-$(CONFIG_PPC_B4860) += b4860.o
endif
COBJS := $(COBJS-y)
/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
* Dave Liu <daveliu@freescale.com>
*
* This program is free software; you can redistribute it and/or
#include <phy.h>
#include <asm/fsl_dtsec.h>
#include <asm/fsl_tgec.h>
+#include <asm/fsl_memac.h>
#include "fm.h"
TBICR_FULL_DUPLEX | TBICR_SPEED1_SET)
/* Configure the TBI for SGMII operation */
-void dtsec_configure_serdes(struct fm_eth *priv)
+static void dtsec_configure_serdes(struct fm_eth *priv)
{
+#ifdef CONFIG_SYS_FMAN_V3
+ u32 value;
+ struct mii_dev bus;
+ bus.priv = priv->mac->phyregs;
+
+ /* SGMII IF mode + AN enable */
+ value = PHY_SGMII_IF_MODE_AN | PHY_SGMII_IF_MODE_SGMII;
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x14, value);
+
+ /* Dev ability according to SGMII specification */
+ value = PHY_SGMII_DEV_ABILITY_SGMII;
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x4, value);
+
+ /* Adjust link timer for SGMII -
+ 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 */
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x13, 0x3);
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0xd40);
+
+ /* Restart AN */
+ value = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN;
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0, value);
+#else
struct dtsec *regs = priv->mac->base;
struct tsec_mii_mng *phyregs = priv->mac->phyregs;
TBIANA_SGMII_ACK);
tsec_local_mdio_write(phyregs, in_be32(®s->tbipa), 0,
TBI_CR, TBICR_SETTINGS);
+#endif
}
static void dtsec_init_phy(struct eth_device *dev)
{
struct fm_eth *fm_eth = dev->priv;
- struct dtsec *regs = (struct dtsec *)fm_eth->mac->base;
+#ifndef CONFIG_SYS_FMAN_V3
+ struct dtsec *regs = (struct dtsec *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
/* Assign a Physical address to the TBI */
out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE);
+#endif
if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII)
dtsec_configure_serdes(fm_eth);
num = fm_eth->num;
+#ifdef CONFIG_SYS_FMAN_V3
+ base = ®->memac[num].fm_memac;
+ phyregs = ®->memac[num].fm_memac_mdio;
+#else
/* Get the mac registers base address */
if (fm_eth->type == FM_ETH_1G_E) {
base = ®->mac_1g[num].fm_dtesc;
base = ®->mac_10g[num].fm_10gec;
phyregs = ®->mac_10g[num].fm_10gec_mdio;
}
+#endif
/* alloc mac controller */
mac = malloc(sizeof(struct fsl_enet_mac));
/* save the mac to fm_eth struct */
fm_eth->mac = mac;
+#ifdef CONFIG_SYS_FMAN_V3
+ init_memac(mac, base, phyregs, MAX_RXBUF_LEN);
+#else
if (fm_eth->type == FM_ETH_1G_E)
init_dtsec(mac, base, phyregs, MAX_RXBUF_LEN);
else
init_tgec(mac, base, phyregs, MAX_RXBUF_LEN);
+#endif
return 1;
}
#if (CONFIG_SYS_NUM_FM1_DTSEC >= 5)
FM_DTSEC_INFO_INITIALIZER(1, 5),
#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 6)
+ FM_DTSEC_INFO_INITIALIZER(1, 6),
+#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 7)
+ FM_DTSEC_INFO_INITIALIZER(1, 9),
+#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 8)
+ FM_DTSEC_INFO_INITIALIZER(1, 10),
+#endif
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 1)
FM_DTSEC_INFO_INITIALIZER(2, 1),
#endif
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 5)
FM_DTSEC_INFO_INITIALIZER(2, 5),
#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 6)
+ FM_DTSEC_INFO_INITIALIZER(2, 6),
+#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 7)
+ FM_DTSEC_INFO_INITIALIZER(2, 9),
+#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 8)
+ FM_DTSEC_INFO_INITIALIZER(2, 10),
+#endif
#if (CONFIG_SYS_NUM_FM1_10GEC >= 1)
FM_TGEC_INFO_INITIALIZER(1, 1),
#endif
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* MAXFRM - maximum frame length */
+#define MAXFRM_MASK 0x0000ffff
+
+#include <common.h>
+#include <phy.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/fsl_enet.h>
+#include <asm/fsl_memac.h>
+
+#include "fm.h"
+
+static void memac_init_mac(struct fsl_enet_mac *mac)
+{
+ struct memac *regs = mac->base;
+
+ /* mask all interrupt */
+ out_be32(®s->imask, IMASK_MASK_ALL);
+
+ /* clear all events */
+ out_be32(®s->ievent, IEVENT_CLEAR_ALL);
+
+ /* set the max receive length */
+ out_be32(®s->maxfrm, mac->max_rx_len & MAXFRM_MASK);
+
+ /* multicast frame reception for the hash entry disable */
+ out_be32(®s->hashtable_ctrl, 0);
+}
+
+static void memac_enable_mac(struct fsl_enet_mac *mac)
+{
+ struct memac *regs = mac->base;
+
+ setbits_be32(®s->command_config, MEMAC_CMD_CFG_RXTX_EN);
+}
+
+static void memac_disable_mac(struct fsl_enet_mac *mac)
+{
+ struct memac *regs = mac->base;
+
+ clrbits_be32(®s->command_config, MEMAC_CMD_CFG_RXTX_EN);
+}
+
+static void memac_set_mac_addr(struct fsl_enet_mac *mac, u8 *mac_addr)
+{
+ struct memac *regs = mac->base;
+ u32 mac_addr0, mac_addr1;
+
+ /*
+ * if a station address of 0x12345678ABCD, perform a write to
+ * MAC_ADDR0 of 0x78563412, MAC_ADDR1 of 0x0000CDAB
+ */
+ mac_addr0 = (mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+ (mac_addr[1] << 8) | (mac_addr[0]);
+ out_be32(®s->mac_addr_0, mac_addr0);
+
+ mac_addr1 = ((mac_addr[5] << 8) | mac_addr[4]) & 0x0000ffff;
+ out_be32(®s->mac_addr_1, mac_addr1);
+}
+
+static void memac_set_interface_mode(struct fsl_enet_mac *mac,
+ phy_interface_t type, int speed)
+{
+ /* Roy need more work here */
+
+ struct memac *regs = mac->base;
+ u32 if_mode, if_status;
+
+ /* clear all bits relative with interface mode */
+ if_mode = in_be32(®s->if_mode);
+ if_status = in_be32(®s->if_status);
+
+ /* set interface mode */
+ switch (type) {
+ case PHY_INTERFACE_MODE_GMII:
+ if_mode &= ~IF_MODE_MASK;
+ if_mode |= IF_MODE_GMII;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ if_mode |= (IF_MODE_GMII | IF_MODE_RG);
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ if_mode |= (IF_MODE_GMII | IF_MODE_RM);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ if_mode &= ~IF_MODE_MASK;
+ if_mode |= (IF_MODE_GMII);
+ break;
+ default:
+ break;
+ }
+ /* Enable automatic speed selection */
+ if_mode |= IF_MODE_EN_AUTO;
+
+ debug(" %s, if_mode = %x\n", __func__, if_mode);
+ debug(" %s, if_status = %x\n", __func__, if_status);
+ out_be32(®s->if_mode, if_mode);
+ return;
+}
+
+void init_memac(struct fsl_enet_mac *mac, void *base,
+ void *phyregs, int max_rx_len)
+{
+ mac->base = base;
+ mac->phyregs = phyregs;
+ mac->max_rx_len = max_rx_len;
+ mac->init_mac = memac_init_mac;
+ mac->enable_mac = memac_enable_mac;
+ mac->disable_mac = memac_disable_mac;
+ mac->set_mac_addr = memac_set_mac_addr;
+ mac->set_if_mode = memac_set_interface_mode;
+}
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Andy Fleming <afleming@freescale.com>
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ * Some part is taken from tsec.c
+ */
+#include <common.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/io.h>
+#include <asm/fsl_memac.h>
+#include <fm_eth.h>
+
+/*
+ * Write value to the PHY for this device to the register at regnum, waiting
+ * until the write is done before it returns. All PHY configuration has to be
+ * done through the TSEC1 MIIM regs
+ */
+int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum, u16 value)
+{
+ u32 mdio_ctl;
+ struct memac_mdio_controller *regs = bus->priv;
+ u32 c45 = 1; /* Default to 10G interface */
+
+ if (dev_addr == MDIO_DEVAD_NONE) {
+ c45 = 0; /* clause 22 */
+ dev_addr = regnum & 0x1f;
+ clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC);
+ } else {
+ setbits_be32(®s->mdio_stat, MDIO_STAT_ENC);
+ setbits_be32(®s->mdio_stat, MDIO_STAT_HOLD_15_CLK);
+ }
+
+ /* Wait till the bus is free */
+ while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Set the port and dev addr */
+ mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
+ out_be32(®s->mdio_ctl, mdio_ctl);
+
+ /* Set the register address */
+ if (c45)
+ out_be32(®s->mdio_addr, regnum & 0xffff);
+
+ /* Wait till the bus is free */
+ while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Write the value to the register */
+ out_be32(®s->mdio_data, MDIO_DATA(value));
+
+ /* Wait till the MDIO write is complete */
+ while ((in_be32(®s->mdio_data)) & MDIO_DATA_BSY)
+ ;
+
+ return 0;
+}
+
+/*
+ * Reads from register regnum in the PHY for device dev, returning the value.
+ * Clears miimcom first. All PHY configuration has to be done through the
+ * TSEC1 MIIM regs
+ */
+int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum)
+{
+ u32 mdio_ctl;
+ struct memac_mdio_controller *regs = bus->priv;
+ u32 c45 = 1;
+
+ if (dev_addr == MDIO_DEVAD_NONE) {
+ c45 = 0; /* clause 22 */
+ dev_addr = regnum & 0x1f;
+ clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC);
+ } else {
+ setbits_be32(®s->mdio_stat, MDIO_STAT_ENC);
+ setbits_be32(®s->mdio_stat, MDIO_STAT_HOLD_15_CLK);
+ }
+
+ /* Wait till the bus is free */
+ while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Set the Port and Device Addrs */
+ mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
+ out_be32(®s->mdio_ctl, mdio_ctl);
+
+ /* Set the register address */
+ if (c45)
+ out_be32(®s->mdio_addr, regnum & 0xffff);
+
+ /* Wait till the bus is free */
+ while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Initiate the read */
+ mdio_ctl |= MDIO_CTL_READ;
+ out_be32(®s->mdio_ctl, mdio_ctl);
+
+ /* Wait till the MDIO write is complete */
+ while ((in_be32(®s->mdio_data)) & MDIO_DATA_BSY)
+ ;
+
+ /* Return all Fs if nothing was there */
+ if (in_be32(®s->mdio_stat) & MDIO_STAT_RD_ER)
+ return 0xffff;
+
+ return in_be32(®s->mdio_data) & 0xffff;
+}
+
+int memac_mdio_reset(struct mii_dev *bus)
+{
+ return 0;
+}
+
+int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info)
+{
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate FM TGEC MDIO bus\n");
+ return -1;
+ }
+
+ bus->read = memac_mdio_read;
+ bus->write = memac_mdio_write;
+ bus->reset = memac_mdio_reset;
+ sprintf(bus->name, info->name);
+
+ bus->priv = info->regs;
+
+ return mdio_register(bus);
+}
#include <asm/immap_85xx.h>
#include <asm/fsl_serdes.h>
-u32 port_to_devdisr[] = {
+static u32 port_to_devdisr[] = {
[FM1_DTSEC1] = MPC85xx_DEVDISR_TSEC1,
[FM1_DTSEC2] = MPC85xx_DEVDISR_TSEC2,
};
#include <asm/immap_85xx.h>
#include <asm/fsl_serdes.h>
-u32 port_to_devdisr[] = {
+static u32 port_to_devdisr[] = {
[FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
[FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
[FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
#include <asm/immap_85xx.h>
#include <asm/fsl_serdes.h>
-u32 port_to_devdisr[] = {
+static u32 port_to_devdisr[] = {
[FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
[FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
[FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+u32 port_to_devdisr[] = {
+ [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
+ [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
+ [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
+ [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
+ [FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5,
+ [FM1_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC1_6,
+ [FM1_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC1_9,
+ [FM1_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC1_10,
+ [FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1_1,
+ [FM1_10GEC2] = FSL_CORENET_DEVDISR2_10GEC1_2,
+ [FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1,
+ [FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2,
+ [FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3,
+ [FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4,
+ [FM2_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC2_5,
+ [FM2_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC2_6,
+ [FM2_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC2_9,
+ [FM2_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC2_10,
+ [FM2_10GEC1] = FSL_CORENET_DEVDISR2_10GEC2_1,
+ [FM2_10GEC2] = FSL_CORENET_DEVDISR2_10GEC2_2,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 devdisr2 = in_be32(&gur->devdisr2);
+
+ return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+ setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
+
+ if (is_device_disabled(port))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if ((port == FM1_10GEC1 || port == FM1_10GEC2)
+ && (is_serdes_configured(XAUI_FM1)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+ if ((port == FM2_10GEC1 || port == FM2_10GEC2)
+ && (is_serdes_configured(XAUI_FM2)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */
+#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000
+#define FSL_CORENET_RCWSR13_EC2 0x18000000 /* bits 419..420 */
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC2_FM2_DTSEC6_RGMII 0x08000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000
+ /* handle RGMII first */
+ if ((port == FM2_DTSEC5) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) ==
+ FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM1_DTSEC5) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+ FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM2_DTSEC6) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+ FSL_CORENET_RCWSR13_EC2_FM2_DTSEC6_RGMII))
+ return PHY_INTERFACE_MODE_RGMII;
+ switch (port) {
+ case FM1_DTSEC1:
+ case FM1_DTSEC2:
+ case FM1_DTSEC3:
+ case FM1_DTSEC4:
+ case FM1_DTSEC5:
+ case FM1_DTSEC6:
+ case FM1_DTSEC9:
+ case FM1_DTSEC10:
+ if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ case FM2_DTSEC1:
+ case FM2_DTSEC2:
+ case FM2_DTSEC3:
+ case FM2_DTSEC4:
+ case FM2_DTSEC5:
+ case FM2_DTSEC6:
+ case FM2_DTSEC9:
+ case FM2_DTSEC10:
+ if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ default:
+ return PHY_INTERFACE_MODE_NONE;
+ }
+
+ return PHY_INTERFACE_MODE_NONE;
+}
* until the write is done before it returns. All PHY configuration has to be
* done through the TSEC1 MIIM regs
*/
-int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
- int regnum, u16 value)
+static int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum, u16 value)
{
u32 mdio_ctl;
u32 stat_val;
* Clears miimcom first. All PHY configuration has to be done through the
* TSEC1 MIIM regs
*/
-int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
- int regnum)
+static int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum)
{
u32 mdio_ctl;
u32 stat_val;
return in_be32(®s->mdio_data) & 0xffff;
}
-int tgec_mdio_reset(struct mii_dev *bus)
+static int tgec_mdio_reset(struct mii_dev *bus)
{
return 0;
}
#include "macb.h"
-#define barrier() asm volatile("" ::: "memory")
-
#define CONFIG_SYS_MACB_RX_BUFFER_SIZE 4096
#define CONFIG_SYS_MACB_RX_RING_SIZE (CONFIG_SYS_MACB_RX_BUFFER_SIZE / 128)
#define CONFIG_SYS_MACB_TX_RING_SIZE 16
int mcffec_miiphy_write(const char *devname, unsigned char addr, unsigned char reg,
unsigned short value)
{
- short rdreg; /* register working value */
-
#ifdef MII_DEBUG
printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
#endif
- rdreg = mii_send(mk_mii_write(addr, reg, value));
+ mii_send(mk_mii_write(addr, reg, value));
#ifdef MII_DEBUG
printf("0x%04x\n", value);
+++ /dev/null
-/*
- * Copyright (C) 2004 IMMS gGmbH <www.imms.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * author(s): Thomas Elste, <info@elste.org>
- * (some parts derived from uCLinux Netarm Ethernet Driver)
- */
-
-
-#include <common.h>
-#include <command.h>
-#include <net.h>
-#include "netarm_eth.h"
-#include <asm/arch/netarm_registers.h>
-
-static int na_mii_poll_busy (void);
-
-static void na_get_mac_addr (void)
-{
- unsigned short p[3];
- char *m_addr;
- char ethaddr[20];
-
- m_addr = (char *) p;
-
- p[0] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_1);
- p[1] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_2);
- p[2] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_3);
-
- sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
- m_addr[0], m_addr[1],
- m_addr[2], m_addr[3], m_addr[4], m_addr[5]);
-
- printf ("HW-MAC Address: %s\n", ethaddr);
-
- /* set env, todo: check if already an adress is set */
- setenv ("ethaddr", ethaddr);
-}
-
-static void na_mii_write (int reg, int value)
-{
- int mii_addr;
-
- /* Select register */
- mii_addr = CONFIG_SYS_ETH_PHY_ADDR + reg;
- SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
- /* Write value */
- SET_EADDR (NETARM_ETH_MII_WRITE, value);
- na_mii_poll_busy ();
-}
-
-static unsigned int na_mii_read (int reg)
-{
- int mii_addr, val;
-
- /* Select register */
- mii_addr = CONFIG_SYS_ETH_PHY_ADDR + reg;
- SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
- /* do one management cycle */
- SET_EADDR (NETARM_ETH_MII_CMD,
- GET_EADDR (NETARM_ETH_MII_CMD) | NETARM_ETH_MIIC_RSTAT);
- na_mii_poll_busy ();
- /* Return read value */
- val = GET_EADDR (NETARM_ETH_MII_READ);
- return val;
-}
-
-static int na_mii_poll_busy (void)
-{
- ulong start;
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0));
- while (get_timer(start) < NA_MII_POLL_BUSY_DELAY) {
- if (!(GET_EADDR (NETARM_ETH_MII_IND) & NETARM_ETH_MIII_BUSY)) {
- return 1;
- }
- }
- printf ("na_mii_busy timeout\n");
- return (0);
-}
-
-static int na_mii_identify_phy (void)
-{
- int id_reg_a = 0;
-
- /* get phy id register */
- id_reg_a = na_mii_read (MII_PHY_ID);
-
- if (id_reg_a == 0x0043) {
- /* This must be an Enable or a Lucent LU3X31 PHY chip */
- return 1;
- } else if (id_reg_a == 0x0013) {
- /* it is an Intel LXT971A */
- return 1;
- }
- return (0);
-}
-
-static int na_mii_negotiate (void)
-{
- int i = 0;
-
- /* Enable auto-negotiation */
- na_mii_write (MII_PHY_AUTONEGADV, 0x01e1);
- /* FIXME: 0x01E1 is 100Mb half and full duplex, 0x0061 is 10Mb only */
- /* Restart auto-negotiation */
- na_mii_write (MII_PHY_CONTROL, 0x1200);
-
- /* status register is 0xffff after setting the autoneg restart bit */
- while (na_mii_read (MII_PHY_STATUS) == 0xffff) {
- i++;
- }
-
- /* na_mii_read uses the timer already, so we can't use it again for
- timeout checking.
- Instead we just try some times.
- */
- for (i = 0; i < 40000; i++) {
- if ((na_mii_read (MII_PHY_STATUS) & 0x0024) == 0x0024) {
- return 0;
- }
- }
- /*
- printf("*Warning* autonegotiation timeout, status: 0x%x\n",na_mii_read(MII_PHY_STATUS));
- */
- return (1);
-}
-
-static unsigned int na_mii_check_speed (void)
-{
- unsigned int status;
-
- /* Read Status register */
- status = na_mii_read (MII_PHY_STATUS);
- /* Check link status. If 0, default to 100 Mbps. */
- if ((status & 0x0004) == 0) {
- printf ("*Warning* no link detected, set default speed to 100Mbs\n");
- return 1;
- } else {
- if ((na_mii_read (17) & 0x4000) != 0) {
- printf ("100Mbs link detected\n");
- return 1;
- } else {
- printf ("10Mbs link detected\n");
- return 0;
- }
- }
- return 0;
-}
-
-static int reset_eth (void)
-{
- int pt;
- ulong start;
-
- na_get_mac_addr ();
- pt = na_mii_identify_phy ();
-
- /* reset the phy */
- na_mii_write (MII_PHY_CONTROL, 0x8000);
- start = get_timer(0);
- while (get_timer(start) < NA_MII_NEGOTIATE_DELAY) {
- if ((na_mii_read (MII_PHY_STATUS) & 0x8000) == 0) {
- break;
- }
- }
- if (get_timer(start) >= NA_MII_NEGOTIATE_DELAY)
- printf ("phy reset timeout\n");
-
- /* set the PCS reg */
- SET_EADDR (NETARM_ETH_PCS_CFG, NETARM_ETH_PCSC_CLKS_25M |
- NETARM_ETH_PCSC_ENJAB | NETARM_ETH_PCSC_NOCFR);
-
- na_mii_negotiate ();
- na_mii_check_speed ();
-
- /* Delay 10 millisecond. (Maybe this should be 1 second.) */
- udelay (10000);
-
- /* Turn receive on.
- Enable statistics register autozero on read.
- Do not insert MAC address on transmit.
- Do not enable special test modes. */
- SET_EADDR (NETARM_ETH_STL_CFG,
- (NETARM_ETH_STLC_AUTOZ | NETARM_ETH_STLC_RXEN));
-
- /* Set the inter-packet gap delay to 0.96us for MII.
- The NET+ARM H/W Reference Guide indicates that the Back-to-back IPG
- Gap Timer Register should be set to 0x15 and the Non Back-to-back IPG
- Gap Timer Register should be set to 0x00000C12 for the MII PHY. */
- SET_EADDR (NETARM_ETH_B2B_IPG_GAP_TMR, 0x15);
- SET_EADDR (NETARM_ETH_NB2B_IPG_GAP_TMR, 0x00000C12);
-
- /* Add CRC to end of packets.
- Pad packets to minimum length of 64 bytes.
- Allow unlimited length transmit packets.
- Receive all broadcast packets.
- NOTE: Multicast addressing is NOT enabled here currently. */
- SET_EADDR (NETARM_ETH_MAC_CFG,
- (NETARM_ETH_MACC_CRCEN |
- NETARM_ETH_MACC_PADEN | NETARM_ETH_MACC_HUGEN));
- SET_EADDR (NETARM_ETH_SAL_FILTER, NETARM_ETH_SALF_BROAD);
-
- /* enable fifos */
- SET_EADDR (NETARM_ETH_GEN_CTRL,
- (NETARM_ETH_GCR_ERX | NETARM_ETH_GCR_ETX));
-
- return (0);
-}
-
-
-extern int eth_init (bd_t * bd)
-{
- reset_eth ();
- return 0;
-}
-
-extern void eth_halt (void)
-{
- SET_EADDR (NETARM_ETH_GEN_CTRL, 0);
-}
-
-/* Get a data block via Ethernet */
-extern int eth_rx (void)
-{
- int i;
- unsigned short rxlen;
- unsigned int *addr;
- unsigned int rxstatus, lastrxlen;
- char *pa;
-
- /* RXBR is 1, data block was received */
- if ((GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXBR) == 0)
- return 0;
-
- /* get status register and the length of received block */
- rxstatus = GET_EADDR (NETARM_ETH_RX_STAT);
- rxlen = (rxstatus & NETARM_ETH_RXSTAT_SIZE) >> 16;
-
- if (rxlen == 0)
- return 0;
-
- /* clear RXBR to make fifo available */
- SET_EADDR (NETARM_ETH_GEN_STAT,
- GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_RXBR);
-
- /* clear TXBC to make fifo available */
- /* According to NETARM50 data manual you just have to clear
- RXBR but that has no effect. Only after clearing TXBC the
- Fifo becomes readable. */
- SET_EADDR (NETARM_ETH_GEN_STAT,
- GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_TXBC);
-
- addr = (unsigned int *) NetRxPackets[0];
- pa = (char *) NetRxPackets[0];
-
- /* read the fifo */
- for (i = 0; i < rxlen / 4; i++) {
- *addr = GET_EADDR (NETARM_ETH_FIFO_DAT1);
- addr++;
- }
-
- if (GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXREGR) {
- /* RXFDB indicates wether the last word is 1,2,3 or 4 bytes long */
- lastrxlen =
- (GET_EADDR (NETARM_ETH_GEN_STAT) &
- NETARM_ETH_GST_RXFDB) >> 28;
- *addr = GET_EADDR (NETARM_ETH_FIFO_DAT1);
- switch (lastrxlen) {
- case 1:
- *addr &= 0xff000000;
- break;
- case 2:
- *addr &= 0xffff0000;
- break;
- case 3:
- *addr &= 0xffffff00;
- break;
- }
- }
-
- /* Pass the packet up to the protocol layers. */
- NetReceive (NetRxPackets[0], rxlen);
-
- return rxlen;
-}
-
-/* Send a data block via Ethernet. */
-extern int eth_send(void *packet, int length)
-{
- int i, length32;
- char *pa;
- unsigned int *pa32, lastp = 0, rest;
-
- pa = (char *) packet;
- pa32 = (unsigned int *) packet;
- length32 = length / 4;
- rest = length % 4;
-
- /* make sure there's no garbage in the last word */
- switch (rest) {
- case 0:
- lastp = pa32[length32];
- length32--;
- break;
- case 1:
- lastp = pa32[length32] & 0x000000ff;
- break;
- case 2:
- lastp = pa32[length32] & 0x0000ffff;
- break;
- case 3:
- lastp = pa32[length32] & 0x00ffffff;
- break;
- }
-
- /* write to the fifo */
- for (i = 0; i < length32; i++)
- SET_EADDR (NETARM_ETH_FIFO_DAT1, pa32[i]);
-
- /* the last word is written to an extra register, this
- starts the transmission */
- SET_EADDR (NETARM_ETH_FIFO_DAT2, lastp);
-
- /* NETARM_ETH_TXSTAT_TXOK should be checked, to know if the transmission
- went fine. But we can't use the timer for a timeout loop because
- of it is used already in upper layers. So we just try some times. */
- i = 0;
- while (i < 50000) {
- if ((GET_EADDR (NETARM_ETH_TX_STAT) & NETARM_ETH_TXSTAT_TXOK)
- == NETARM_ETH_TXSTAT_TXOK)
- return 0;
- i++;
- }
-
- printf ("eth_send timeout\n");
- return 1;
-}
return 0;
}
-struct phy_driver AR8021_driver = {
+static struct phy_driver AR8021_driver = {
.name = "AR8021",
.uid = 0x4dd040,
.mask = 0xfffff0,
* what is supported. Returns < 0 on error, 0 if the PHY's advertisement
* hasn't changed, and > 0 if it has changed.
*/
-int genphy_config_advert(struct phy_device *phydev)
+static int genphy_config_advert(struct phy_device *phydev)
{
u32 advertise;
int oldadv, adv;
* Description: Configures MII_BMCR to force speed/duplex
* to the values in phydev. Assumes that the values are valid.
*/
-int genphy_setup_forced(struct phy_device *phydev)
+static int genphy_setup_forced(struct phy_device *phydev)
{
int err;
int ctl = 0;
return 0;
}
-int phy_probe(struct phy_device *phydev)
+static int phy_probe(struct phy_device *phydev)
{
int err = 0;
return &genphy_driver;
}
-struct phy_driver *get_phy_driver(struct phy_device *phydev,
+static struct phy_driver *get_phy_driver(struct phy_device *phydev,
phy_interface_t interface)
{
struct list_head *entry;
return generic_for_interface(interface);
}
-struct phy_device *phy_device_create(struct mii_dev *bus, int addr, int phy_id,
- phy_interface_t interface)
+static struct phy_device *phy_device_create(struct mii_dev *bus, int addr,
+ int phy_id,
+ phy_interface_t interface)
{
struct phy_device *dev;
* Description: Reads the ID registers of the PHY at @addr on the
* @bus, stores it in @phy_id and returns zero on success.
*/
-int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id)
+static int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id)
{
int phy_reg;
* Description: Reads the ID registers of the PHY at @addr on the
* @bus, then allocates and returns the phy_device to represent it.
*/
-struct phy_device *get_phy_device(struct mii_dev *bus, int addr,
- phy_interface_t interface)
+static struct phy_device *get_phy_device(struct mii_dev *bus, int addr,
+ phy_interface_t interface)
{
u32 phy_id = 0x1fffffff;
int i;
}
/* Vitesse VSC8601 */
-int vsc8601_config(struct phy_device *phydev)
+static int vsc8601_config(struct phy_device *phydev)
{
/* Configure some basic stuff */
#ifdef CONFIG_SYS_VSC8601_SKEWFIX
* inx,outx functions fixed this problem.
*/
-#define barrier() __asm__ __volatile__("": : :"memory")
-
static inline word SMC_inw(struct eth_device *dev, dword offset)
{
word v;
#include <common.h>
#include <asm/io.h>
#include <asm/errno.h>
+#include "vsc7385.h"
/*
* Upload a Vitesse VSC7385 firmware image to the hardware
/*
- * Copyright 2007-2011 Freescale Semiconductor, Inc.
+ * Copyright 2007-2012 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
return 1;
}
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
static void fsl_pcie_boot_master(pit_t *pi)
{
/* configure inbound window for slave's u-boot image */
release_addr = CONFIG_SYS_PCIE1_MEM_VIRT
+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
break;
+#ifdef CONFIG_SYS_PCIE2_MEM_VIRT
case 2:
release_addr = CONFIG_SYS_PCIE2_MEM_VIRT
+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
break;
+#endif
+#ifdef CONFIG_SYS_PCIE3_MEM_VIRT
case 3:
release_addr = CONFIG_SYS_PCIE3_MEM_VIRT
+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
break;
+#endif
default:
release_addr = 0;
break;
/* see if we are a PCIe or PCI controller */
pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
/* boot from PCIE --master */
char *s = getenv("bootmaster");
char pcie[6];
}
#ifndef CONFIG_PCI_NOSCAN
- pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &temp8);
-
- /* Programming Interface (PCI_CLASS_PROG)
- * 0 == pci host or pcie root-complex,
- * 1 == pci agent or pcie end-point
- */
- if (!temp8) {
+ if (!fsl_is_pci_agent(hose)) {
debug(" Scanning PCI bus %02x\n",
hose->current_busno);
hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno);
int fsl_is_pci_agent(struct pci_controller *hose)
{
- u8 prog_if;
+ u8 pcie_cap;
pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if);
+ pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
+ if (pcie_cap == PCI_CAP_ID_EXP) {
+ u8 header_type;
- return (prog_if == FSL_PROG_IF_AGENT);
+ pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE,
+ &header_type);
+ return (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL;
+ } else {
+ u8 prog_if;
+
+ pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if);
+ return (prog_if == FSL_PROG_IF_AGENT);
+ }
}
int fsl_pci_init_port(struct fsl_pci_info *pci_info,
if (fsl_is_pci_agent(hose)) {
fsl_pci_config_unlock(hose);
hose->last_busno = hose->first_busno;
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
} else {
/* boot from PCIE --master releases slave's core 0 */
char *s = getenv("bootmaster");
void fsl_pci_config_unlock(struct pci_controller *hose)
{
pci_dev_t dev = PCI_BDF(hose->first_busno,0,0);
- u8 agent;
u8 pcie_cap;
u16 pbfr;
- pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &agent);
- if (!agent)
+ if (!fsl_is_pci_agent(hose))
return;
pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
}
#if defined(CONFIG_FSL_CORENET)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR3_PCIE1
+ #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR3_PCIE2
+ #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR3_PCIE3
+ #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR3_PCIE4
+#else
#define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR_PCIE1
#define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR_PCIE2
#define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR_PCIE3
#define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR_PCIE4
+#endif
#define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
#elif defined(CONFIG_MPC85xx)
#define _DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE
{
struct fsl_pci_info pci_info;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR;
- u32 devdisr = in_be32(&gur->devdisr);
+ u32 devdisr;
+ u32 *addr;
+
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ addr = &gur->devdisr3;
+#else
+ addr = &gur->devdisr;
+#endif
+ devdisr = in_be32(addr);
#ifdef CONFIG_PCIE1
SET_STD_PCIE_INFO(pci_info, 1);
busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE1, &pci_info);
#else
- setbits_be32(&gur->devdisr, _DEVDISR_PCIE1); /* disable */
+ setbits_be32(addr, _DEVDISR_PCIE1); /* disable */
#endif
#ifdef CONFIG_PCIE2
SET_STD_PCIE_INFO(pci_info, 2);
busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE2, &pci_info);
#else
- setbits_be32(&gur->devdisr, _DEVDISR_PCIE2); /* disable */
+ setbits_be32(addr, _DEVDISR_PCIE2); /* disable */
#endif
#ifdef CONFIG_PCIE3
SET_STD_PCIE_INFO(pci_info, 3);
busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE3, &pci_info);
#else
- setbits_be32(&gur->devdisr, _DEVDISR_PCIE3); /* disable */
+ setbits_be32(addr, _DEVDISR_PCIE3); /* disable */
#endif
#ifdef CONFIG_PCIE4
SET_STD_PCIE_INFO(pci_info, 4);
busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE4, &pci_info);
#else
- setbits_be32(&gur->devdisr, _DEVDISR_PCIE4); /* disable */
+ setbits_be32(addr, _DEVDISR_PCIE4); /* disable */
#endif
return busno;
* we just need to know what the SNUMs are for the threads.
*/
static u8 thread_snum[] = {
+/* Evthreads 16-29 are not supported in MPC8309 */
+#if !defined(CONFIG_MPC8309)
0x04, 0x05, 0x0c, 0x0d,
0x14, 0x15, 0x1c, 0x1d,
0x24, 0x25, 0x2c, 0x2d,
- 0x34, 0x35, 0x88, 0x89,
- 0x98, 0x99, 0xa8, 0xa9,
- 0xb8, 0xb9, 0xc8, 0xc9,
- 0xd8, 0xd9, 0xe8, 0xe9,
- 0x08, 0x09, 0x18, 0x19,
- 0x28, 0x29, 0x38, 0x39,
- 0x48, 0x49, 0x58, 0x59,
- 0x68, 0x69, 0x78, 0x79,
- 0x80, 0x81
+ 0x34, 0x35,
+#endif
+ 0x88, 0x89, 0x98, 0x99,
+ 0xa8, 0xa9, 0xb8, 0xb9,
+ 0xc8, 0xc9, 0xd8, 0xd9,
+ 0xe8, 0xe9, 0x08, 0x09,
+ 0x18, 0x19, 0x28, 0x29,
+ 0x38, 0x39, 0x48, 0x49,
+ 0x58, 0x59, 0x68, 0x69,
+ 0x78, 0x79, 0x80, 0x81
};
static void qe_snums_init(void)
COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o
COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
-COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
COBJS-$(CONFIG_S5P) += serial_s5p.o
COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o
-COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o
COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o
COBJS-$(CONFIG_IXP_SERIAL) += serial_ixp.o
COBJS-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o
-COBJS-$(CONFIG_LPC2292_SERIAL) += serial_lpc2292.o
-COBJS-$(CONFIG_LH7A40X_SERIAL) += serial_lh7a40x.o
COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
COBJS-$(CONFIG_MXC_UART) += serial_mxc.o
-COBJS-$(CONFIG_NETARM_SERIAL) += serial_netarm.o
COBJS-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
COBJS-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
COBJS-$(CONFIG_PXA_SERIAL) += serial_pxa.o
writel ((unsigned char)c, &jtag->data);
}
-static void altera_jtag_serial_puts(const char *s)
-{
- while (*s != 0)
- serial_putc (*s++);
-}
-
static int altera_jtag_serial_tstc(void)
{
return ( readl (&jtag->control) & NIOS_JTAG_RRDY);
.stop = NULL,
.setbrg = altera_jtag_serial_setbrg,
.putc = altera_jtag_serial_putc,
- .puts = altera_jtag_serial_puts,
+ .puts = default_serial_puts,
.getc = altera_jtag_serial_getc,
.tstc = altera_jtag_serial_tstc,
};
writel ((unsigned char)c, &uart->txdata);
}
-static void altera_serial_puts(const char *s)
-{
- while (*s != 0) {
- serial_putc (*s++);
- }
-}
-
static int altera_serial_tstc(void)
{
return (readl (&uart->status) & NIOS_UART_RRDY);
.stop = NULL,
.setbrg = altera_serial_setbrg,
.putc = altera_serial_putc,
- .puts = altera_serial_puts,
+ .puts = default_serial_puts,
.getc = altera_serial_getc,
.tstc = altera_serial_tstc,
};
writel(c, &usart->thr);
}
-static void atmel_serial_puts(const char *s)
-{
- while (*s)
- serial_putc(*s++);
-}
-
static int atmel_serial_getc(void)
{
atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
.stop = NULL,
.setbrg = atmel_serial_setbrg,
.putc = atmel_serial_putc,
- .puts = atmel_serial_puts,
+ .puts = default_serial_puts,
.getc = atmel_serial_getc,
.tstc = atmel_serial_tstc,
};
return 0;
}
-static void lpc32xx_serial_puts(const char *s)
-{
- while (*s)
- serial_putc(*s++);
-}
-
static struct serial_device lpc32xx_serial_drv = {
.name = "lpc32xx_serial",
.start = lpc32xx_serial_init,
.stop = NULL,
.setbrg = lpc32xx_serial_setbrg,
.putc = lpc32xx_serial_putc,
- .puts = lpc32xx_serial_puts,
+ .puts = default_serial_puts,
.getc = lpc32xx_serial_getc,
.tstc = lpc32xx_serial_tstc,
};
*/
#include <common.h>
+#include <serial.h>
+#include <linux/compiler.h>
#include <asm/immap.h>
#include <asm/uart.h>
uart->utb = c;
}
-static void mcf_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc(*s++);
- }
-}
-
static int mcf_serial_getc(void)
{
volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
.stop = NULL,
.setbrg = mcf_serial_setbrg,
.putc = mcf_serial_putc,
- .puts = mcf_serial_puts,
+ .puts = default_serial_puts,
.getc = mcf_serial_getc,
.tstc = mcf_serial_tstc,
};
CONSOLE) = c;
}
-/***********************************************************************
- * @Function: serial_puts
- * @Return: n/a
- * @Descr: writes non-zero string to the FIFO.
- ***********************************************************************/
-
-static void ns9750_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc( *s++ );
- }
-}
-
/***********************************************************************
* @Function: serial_getc
* @Return: the character read
.stop = NULL,
.setbrg = ns9750_serial_setbrg,
.putc = ns9750_serial_putc,
- .puts = ns9750_serial_puts,
+ .puts = default_serial_puts,
.getc = ns9750_serial_getc,
.tstc = ns9750_serial_tstc,
};
writel((unsigned char)c, &uart->data);
}
-static void oc_serial_puts(const char *s)
-{
- while (*s != 0) {
- serial_putc (*s++);
- }
-}
-
-
static int oc_serial_tstc(void)
{
unsigned status ;
.stop = NULL,
.setbrg = oc_serial_setbrg,
.putc = oc_serial_putc,
- .puts = oc_serial_puts,
+ .puts = default_serial_puts,
.getc = oc_serial_getc,
.tstc = oc_serial_tstc,
};
+++ /dev/null
-/*
- * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * (C) Copyright 2004
- * DAVE Srl
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info@wawnet.biz
- *
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * MODULE: $Id:$
- * Description: UART/Serial interface for Samsung S3C4510B SoC
- * Runtime Env: ARM7TDMI
- * Change History:
- * 03-02-04 Create (Curt Brune) curt@cucy.com
- *
- */
-
-#include <common.h>
-
-#include <asm/hardware.h>
-#include "s3c4510b_uart.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static UART *uart;
-
-/* flush serial input queue. returns 0 on success or negative error
- * number otherwise
- */
-static int serial_flush_input(void)
-{
- volatile u32 tmp;
-
- /* keep on reading as long as the receiver is not empty */
- while( uart->m_stat.bf.rxReady) {
- tmp = uart->m_rx;
- }
-
- return 0;
-}
-
-
-/* flush output queue. returns 0 on success or negative error number
- * otherwise
- */
-static int serial_flush_output(void)
-{
- /* wait until the transmitter is no longer busy */
- while( !uart->m_stat.bf.txBufEmpty);
-
- return 0;
-}
-
-
-static void s3c4510b_serial_setbrg(void)
-{
- UART_LINE_CTRL ulctrl;
- UART_CTRL uctrl;
- UART_BAUD_DIV ubd;
-
- serial_flush_output();
- serial_flush_input();
-
- /* control register */
- uctrl.ui = 0x0;
- uctrl.bf.rxMode = 0x1;
- uctrl.bf.rxIrq = 0x0;
- uctrl.bf.txMode = 0x1;
- uctrl.bf.DSR = 0x0;
- uctrl.bf.sendBreak = 0x0;
- uctrl.bf.loopBack = 0x0;
- uart->m_ctrl.ui = uctrl.ui;
-
- /* line control register */
- ulctrl.ui = 0x0;
- ulctrl.bf.wordLen = 0x3; /* 8 bit data */
- ulctrl.bf.nStop = 0x0; /* 1 stop bit */
- ulctrl.bf.parity = 0x0; /* no parity */
- ulctrl.bf.clk = 0x0; /* internal clock */
- ulctrl.bf.infra_red = 0x0; /* no infra_red */
- uart->m_lineCtrl.ui = ulctrl.ui;
-
- ubd.ui = 0x0;
-
- /* see table on page 10-15 in SAMSUNG S3C4510B manual */
- /* get correct divisor */
- switch(gd->baudrate) {
- case 1200: ubd.bf.cnt0 = 1301; break;
- case 2400: ubd.bf.cnt0 = 650; break;
- case 4800: ubd.bf.cnt0 = 324; break;
- case 9600: ubd.bf.cnt0 = 162; break;
- case 19200: ubd.bf.cnt0 = 80; break;
- case 38400: ubd.bf.cnt0 = 40; break;
- case 57600: ubd.bf.cnt0 = 26; break;
- case 115200: ubd.bf.cnt0 = 13; break;
- }
-
- uart->m_baudDiv.ui = ubd.ui;
- uart->m_baudCnt = 0x0;
- uart->m_baudClk = 0x0;
-
-}
-
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-static int s3c4510b_serial_init(void)
-{
-
-#if CONFIG_SERIAL1 == 1
- uart = (UART *)UART0_BASE;
-#elif CONFIG_SERIAL1 == 2
- uart = (UART *)UART1_BASE;
-#else
-#error CONFIG_SERIAL1 not equal to 1 or 2
-#endif
-
- serial_setbrg ();
-
- return (0);
-}
-
-
-/*
- * Output a single byte to the serial port.
- */
-static void s3c4510_serial_putc(const char c)
-{
- /* wait for room in the transmit FIFO */
- while( !uart->m_stat.bf.txBufEmpty);
-
- uart->m_tx = c;
-
- /*
- to be polite with serial console add a line feed
- to the carriage return character
- */
- if (c=='\n')
- serial_putc('\r');
-}
-
-/*
- * Test if an input byte is ready from the serial port. Returns non-zero on
- * success, 0 otherwise.
- */
-static int s3c4510b_serial_tstc(void)
-{
- return uart->m_stat.bf.rxReady;
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-static int s3c4510b_serial_getc(void)
-{
- int rv;
-
- for(;;) {
- rv = serial_tstc();
-
- if (rv) {
- return uart->m_rx & 0xFF;
- }
- }
-}
-
-static void s3c4510b_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-
- /* busy wait for tx complete */
- while ( !uart->m_stat.bf.txComplete);
-
- /* clear break */
- uart->m_ctrl.bf.sendBreak = 0;
-
-}
-
-static struct serial_device s3c4510b_serial_drv = {
- .name = "s3c4510b_serial",
- .start = s3c4510b_serial_init,
- .stop = NULL,
- .setbrg = s3c4510b_serial_setbrg,
- .putc = s3c4510b_serial_putc,
- .puts = s3c4510b_serial_puts,
- .getc = s3c4510b_serial_getc,
- .tstc = s3c4510b_serial_tstc,
-};
-
-void s3c4510b_serial_initialize(void)
-{
- serial_register(&s3c4510b_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &s3c4510b_serial_drv;
-}
+++ /dev/null
-#ifndef __UART_H
-#define __UART_H
-
-/*
- * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Description: S3C4510B UART register layout
- */
-
-/* UART LINE CONTROL register */
-typedef struct __BF_UART_LINE_CTRL {
- u32 wordLen: 2;
- u32 nStop: 1;
- u32 parity: 3;
- u32 clk: 1;
- u32 infra_red: 1;
- u32 unused:24;
-} BF_UART_LINE_CTRL;
-
-typedef union _UART_LINE_CTRL {
- u32 ui;
- BF_UART_LINE_CTRL bf;
-} UART_LINE_CTRL;
-
-/* UART CONTROL register */
-typedef struct __BF_UART_CTRL {
- u32 rxMode: 2;
- u32 rxIrq: 1;
- u32 txMode: 2;
- u32 DSR: 1;
- u32 sendBreak: 1;
- u32 loopBack: 1;
- u32 unused:24;
-} BF_UART_CTRL;
-
-typedef union _UART_CTRL {
- u32 ui;
- BF_UART_CTRL bf;
-} UART_CTRL;
-
-/* UART STATUS register */
-typedef struct __BF_UART_STAT {
- u32 overrun: 1;
- u32 parity: 1;
- u32 frame: 1;
- u32 breakIrq: 1;
- u32 DTR: 1;
- u32 rxReady: 1;
- u32 txBufEmpty: 1;
- u32 txComplete: 1;
- u32 unused:24;
-} BF_UART_STAT;
-
-typedef union _UART_STAT {
- u32 ui;
- BF_UART_STAT bf;
-} UART_STAT;
-
-/* UART BAUD_DIV register */
-typedef struct __BF_UART_BAUD_DIV {
- u32 cnt1: 4;
- u32 cnt0:12;
- u32 unused:16;
-} BF_UART_BAUD_DIV;
-
-typedef union _UART_BAUD_DIV {
- u32 ui;
- BF_UART_BAUD_DIV bf;
-} UART_BAUD_DIV;
-
-/* UART register block */
-typedef struct __UART {
- volatile UART_LINE_CTRL m_lineCtrl;
- volatile UART_CTRL m_ctrl;
- volatile UART_STAT m_stat;
- volatile u32 m_tx;
- volatile u32 m_rx;
- volatile UART_BAUD_DIV m_baudDiv;
- volatile u32 m_baudCnt;
- volatile u32 m_baudClk;
-} UART;
-
-#define NL 0x0A
-#define CR 0x0D
-#define BSP 0x08
-#define ESC 0x1B
-#define CTRLZ 0x1A
-#define RUBOUT 0x7F
-
-#endif
#error "Bad: you didn't configure serial ..."
#endif
-#define barrier() asm volatile("" ::: "memory")
-
/*
* The coefficient, used to calculate the baudrate on S3C6400 UARTs is
* calculated as
return uart->UTRSTAT & 0x1;
}
-static void s3c64xx_serial_puts(const char *s)
-{
- while (*s)
- serial_putc(*s++);
-}
-
static struct serial_device s3c64xx_serial_drv = {
.name = "s3c64xx_serial",
.start = s3c64xx_serial_init,
.stop = NULL,
.setbrg = s3c64xx_serial_setbrg,
.putc = s3c64xx_serial_putc,
- .puts = s3c64xx_serial_puts,
+ .puts = default_serial_puts,
.getc = s3c64xx_serial_getc,
.tstc = s3c64xx_serial_tstc,
};
#include <stdio_dev.h>
#include <post.h>
#include <linux/compiler.h>
+#include <errno.h>
DECLARE_GLOBAL_DATA_PTR;
static struct serial_device *serial_devices;
static struct serial_device *serial_current;
+/**
+ * serial_null() - Void registration routine of a serial driver
+ *
+ * This routine implements a void registration routine of a serial
+ * driver. The registration routine of a particular driver is aliased
+ * to this empty function in case the driver is not compiled into
+ * U-Boot.
+ */
static void serial_null(void)
{
}
+/**
+ * serial_initfunc() - Forward declare of driver registration routine
+ * @name: Name of the real driver registration routine.
+ *
+ * This macro expands onto forward declaration of a driver registration
+ * routine, which is then used below in serial_initialize() function.
+ * The declaration is made weak and aliases to serial_null() so in case
+ * the driver is not compiled in, the function is still declared and can
+ * be used, but aliases to serial_null() and thus is optimized away.
+ */
#define serial_initfunc(name) \
void name(void) \
__attribute__((weak, alias("serial_null")));
serial_initfunc(mcf_serial_initialize);
serial_initfunc(ns9750_serial_initialize);
serial_initfunc(oc_serial_initialize);
-serial_initfunc(s3c4510b_serial_initialize);
serial_initfunc(s3c64xx_serial_initialize);
serial_initfunc(sandbox_serial_initialize);
serial_initfunc(clps7111_serial_initialize);
serial_initfunc(ixp_serial_initialize);
serial_initfunc(ks8695_serial_initialize);
serial_initfunc(lh7a40x_serial_initialize);
-serial_initfunc(lpc2292_serial_initialize);
serial_initfunc(max3100_serial_initialize);
serial_initfunc(mxc_serial_initialize);
-serial_initfunc(netarm_serial_initialize);
serial_initfunc(pl01x_serial_initialize);
serial_initfunc(s3c44b0_serial_initialize);
serial_initfunc(sa1100_serial_initialize);
serial_initfunc(sh_serial_initialize);
+/**
+ * serial_register() - Register serial driver with serial driver core
+ * @dev: Pointer to the serial driver structure
+ *
+ * This function registers the serial driver supplied via @dev with
+ * serial driver core, thus making U-Boot aware of it and making it
+ * available for U-Boot to use. On platforms that still require manual
+ * relocation of constant variables, relocation of the supplied structure
+ * is performed.
+ */
void serial_register(struct serial_device *dev)
{
#ifdef CONFIG_NEEDS_MANUAL_RELOC
serial_devices = dev;
}
+/**
+ * serial_initialize() - Register all compiled-in serial port drivers
+ *
+ * This function registers all serial port drivers that are compiled
+ * into the U-Boot binary with the serial core, thus making them
+ * available to U-Boot to use. Lastly, this function assigns a default
+ * serial port to the serial core. That serial port is then used as a
+ * default output.
+ */
void serial_initialize(void)
{
mpc8xx_serial_initialize();
mcf_serial_initialize();
ns9750_serial_initialize();
oc_serial_initialize();
- s3c4510b_serial_initialize();
s3c64xx_serial_initialize();
sandbox_serial_initialize();
clps7111_serial_initialize();
ixp_serial_initialize();
ks8695_serial_initialize();
lh7a40x_serial_initialize();
- lpc2292_serial_initialize();
max3100_serial_initialize();
mxc_serial_initialize();
- netarm_serial_initialize();
pl01x_serial_initialize();
s3c44b0_serial_initialize();
sa1100_serial_initialize();
serial_assign(default_serial_console()->name);
}
+/**
+ * serial_stdio_init() - Register serial ports with STDIO core
+ *
+ * This function generates a proxy driver for each serial port driver.
+ * These proxy drivers then register with the STDIO core, making the
+ * serial drivers available as STDIO devices.
+ */
void serial_stdio_init(void)
{
struct stdio_dev dev;
}
}
+/**
+ * serial_assign() - Select the serial output device by name
+ * @name: Name of the serial driver to be used as default output
+ *
+ * This function configures the serial output multiplexing by
+ * selecting which serial device will be used as default. In case
+ * the STDIO "serial" device is selected as stdin/stdout/stderr,
+ * the serial device previously configured by this function will be
+ * used for the particular operation.
+ *
+ * Returns 0 on success, negative on error.
+ */
int serial_assign(const char *name)
{
struct serial_device *s;
for (s = serial_devices; s; s = s->next) {
- if (strcmp(s->name, name) == 0) {
- serial_current = s;
- return 0;
- }
+ if (strcmp(s->name, name))
+ continue;
+ serial_current = s;
+ return 0;
}
- return 1;
+ return -EINVAL;
}
+/**
+ * serial_reinit_all() - Reinitialize all compiled-in serial ports
+ *
+ * This function reinitializes all serial ports that are compiled
+ * into U-Boot by calling their serial_start() functions.
+ */
void serial_reinit_all(void)
{
struct serial_device *s;
s->start();
}
+/**
+ * get_current() - Return pointer to currently selected serial port
+ *
+ * This function returns a pointer to currently selected serial port.
+ * The currently selected serial port is altered by serial_assign()
+ * function.
+ *
+ * In case this function is called before relocation or before any serial
+ * port is configured, this function calls default_serial_console() to
+ * determine the serial port. Otherwise, the configured serial port is
+ * returned.
+ *
+ * Returns pointer to the currently selected serial port on success,
+ * NULL on error.
+ */
static struct serial_device *get_current(void)
{
struct serial_device *dev;
- if (!(gd->flags & GD_FLG_RELOC) || !serial_current) {
+ if (!(gd->flags & GD_FLG_RELOC))
+ dev = default_serial_console();
+ else if (!serial_current)
dev = default_serial_console();
+ else
+ dev = serial_current;
- /* We must have a console device */
- if (!dev) {
+ /* We must have a console device */
+ if (!dev) {
#ifdef CONFIG_SPL_BUILD
- puts("Cannot find console\n");
- hang();
+ puts("Cannot find console\n");
+ hang();
#else
- panic("Cannot find console\n");
+ panic("Cannot find console\n");
#endif
- }
- } else
- dev = serial_current;
+ }
+
return dev;
}
+/**
+ * serial_init() - Initialize currently selected serial port
+ *
+ * This function initializes the currently selected serial port. This
+ * usually involves setting up the registers of that particular port,
+ * enabling clock and such. This function uses the get_current() call
+ * to determine which port is selected.
+ *
+ * Returns 0 on success, negative on error.
+ */
int serial_init(void)
{
return get_current()->start();
}
+/**
+ * serial_setbrg() - Configure baud-rate of currently selected serial port
+ *
+ * This function configures the baud-rate of the currently selected
+ * serial port. The baud-rate is retrieved from global data within
+ * the serial port driver. This function uses the get_current() call
+ * to determine which port is selected.
+ *
+ * Returns 0 on success, negative on error.
+ */
void serial_setbrg(void)
{
get_current()->setbrg();
}
+/**
+ * serial_getc() - Read character from currently selected serial port
+ *
+ * This function retrieves a character from currently selected serial
+ * port. In case there is no character waiting on the serial port,
+ * this function will block and wait for the character to appear. This
+ * function uses the get_current() call to determine which port is
+ * selected.
+ *
+ * Returns the character on success, negative on error.
+ */
int serial_getc(void)
{
return get_current()->getc();
}
+/**
+ * serial_tstc() - Test if data is available on currently selected serial port
+ *
+ * This function tests if one or more characters are available on
+ * currently selected serial port. This function never blocks. This
+ * function uses the get_current() call to determine which port is
+ * selected.
+ *
+ * Returns positive if character is available, zero otherwise.
+ */
int serial_tstc(void)
{
return get_current()->tstc();
}
+/**
+ * serial_putc() - Output character via currently selected serial port
+ * @c: Single character to be output from the serial port.
+ *
+ * This function outputs a character via currently selected serial
+ * port. This character is passed to the serial port driver responsible
+ * for controlling the hardware. The hardware may still be in process
+ * of transmitting another character, therefore this function may block
+ * for a short amount of time. This function uses the get_current()
+ * call to determine which port is selected.
+ */
void serial_putc(const char c)
{
get_current()->putc(c);
}
+/**
+ * serial_puts() - Output string via currently selected serial port
+ * @s: Zero-terminated string to be output from the serial port.
+ *
+ * This function outputs a zero-terminated string via currently
+ * selected serial port. This function behaves as an accelerator
+ * in case the hardware can queue multiple characters for transfer.
+ * The whole string that is to be output is available to the function
+ * implementing the hardware manipulation. Transmitting the whole
+ * string may take some time, thus this function may block for some
+ * amount of time. This function uses the get_current() call to
+ * determine which port is selected.
+ */
void serial_puts(const char *s)
{
get_current()->puts(s);
}
+/**
+ * default_serial_puts() - Output string by calling serial_putc() in loop
+ * @s: Zero-terminated string to be output from the serial port.
+ *
+ * This function outputs a zero-terminated string by calling serial_putc()
+ * in a loop. Most drivers do not support queueing more than one byte for
+ * transfer, thus this function precisely implements their serial_puts().
+ *
+ * To optimize the number of get_current() calls, this function only
+ * calls get_current() once and then directly accesses the putc() call
+ * of the &struct serial_device .
+ */
+void default_serial_puts(const char *s)
+{
+ struct serial_device *dev = get_current();
+ while (*s)
+ dev->putc(*s++);
+}
+
#if CONFIG_POST & CONFIG_SYS_POST_UART
static const int bauds[] = CONFIG_SYS_BAUDRATE_TABLE;
+/**
+ * uart_post_test() - Test the currently selected serial port using POST
+ * @flags: POST framework flags
+ *
+ * Do a loopback test of the currently selected serial port. This
+ * function is only useful in the context of the POST testing framwork.
+ * The serial port is firstly configured into loopback mode and then
+ * characters are sent through it.
+ *
+ * Returns 0 on success, value otherwise.
+ */
/* Mark weak until post/cpu/.../uart.c migrate over */
__weak
int uart_post_test(int flags)
+++ /dev/null
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <clps7111.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void clps7111_serial_setbrg(void)
-{
- unsigned int reg = 0;
-
- switch (gd->baudrate) {
- case 1200: reg = 191; break;
- case 9600: reg = 23; break;
- case 19200: reg = 11; break;
- case 38400: reg = 5; break;
- case 57600: reg = 3; break;
- case 115200: reg = 1; break;
- default: hang (); break;
- }
-
- /* init serial serial 1,2 */
- IO_SYSCON1 = SYSCON1_UART1EN;
- IO_SYSCON2 = SYSCON2_UART2EN;
-
- reg |= UBRLCR_WRDLEN8;
-
- IO_UBRLCR1 = reg;
- IO_UBRLCR2 = reg;
-}
-
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-static int clps7111_serial_init(void)
-{
- serial_setbrg ();
-
- return (0);
-}
-
-
-/*
- * Output a single byte to the serial port.
- */
-static void clps7111_serial_putc(const char c)
-{
- int tmo;
-
- /* If \n, also do \r */
- if (c == '\n')
- serial_putc ('\r');
-
- tmo = get_timer (0) + 1 * CONFIG_SYS_HZ;
- while (IO_SYSFLG1 & SYSFLG1_UTXFF)
- if (get_timer (0) > tmo)
- break;
-
- IO_UARTDR1 = c;
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-static int clps7111_serial_tstc(void)
-{
- return !(IO_SYSFLG1 & SYSFLG1_URXFE);
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-static int clps7111_serial_getc(void)
-{
- while (IO_SYSFLG1 & SYSFLG1_URXFE);
-
- return IO_UARTDR1 & 0xff;
-}
-
-static void clps7111_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-static struct serial_device clps7111_serial_drv = {
- .name = "clps7111_serial",
- .start = clps7111_serial_init,
- .stop = NULL,
- .setbrg = clps7111_serial_setbrg,
- .putc = clps7111_serial_putc,
- .puts = clps7111_serial_puts,
- .getc = clps7111_serial_getc,
- .tstc = clps7111_serial_tstc,
-};
-
-void clps7111_serial_initialize(void)
-{
- serial_register(&clps7111_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &clps7111_serial_drv;
-}
return 1;
}
-static void imx_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
static struct serial_device imx_serial_drv = {
.name = "imx_serial",
.start = imx_serial_init,
.stop = NULL,
.setbrg = imx_serial_setbrg,
.putc = imx_serial_putc,
- .puts = imx_serial_puts,
+ .puts = default_serial_puts,
.getc = imx_serial_getc,
.tstc = imx_serial_tstc,
};
return (char) RBR(CONFIG_SYS_IXP425_CONSOLE) & 0xff;
}
-static void ixp_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
static struct serial_device ixp_serial_drv = {
.name = "ixp_serial",
.start = ixp_serial_init,
.stop = NULL,
.setbrg = ixp_serial_setbrg,
.putc = ixp_serial_putc,
- .puts = ixp_serial_puts,
+ .puts = default_serial_puts,
.getc = ixp_serial_getc,
.tstc = ixp_serial_tstc,
};
return 0;
}
-static void ks8695_serial_puts(const char *s)
-{
- char c;
- while ((c = *s++) != 0)
- serial_putc(c);
-}
-
static int ks8695_serial_getc(void)
{
volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
.stop = NULL,
.setbrg = ks8695_serial_setbrg,
.putc = ks8695_serial_putc,
- .puts = ks8695_serial_puts,
+ .puts = default_serial_puts,
.getc = ks8695_serial_getc,
.tstc = ks8695_serial_tstc,
};
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <lh7a40x.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CONSOLE_UART1)
-# define UART_CONSOLE 1
-#elif defined(CONFIG_CONSOLE_UART2)
-# define UART_CONSOLE 2
-#elif defined(CONFIG_CONSOLE_UART3)
-# define UART_CONSOLE 3
-#else
-# error "No console configured ... "
-#endif
-
-static void lh7a40x_serial_setbrg(void)
-{
- lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
- int i;
- unsigned int reg = 0;
-
- /*
- * userguide 15.1.2.4
- *
- * BAUDDIV is (UART_REF_FREQ/(16 X BAUD))-1
- *
- * UART_REF_FREQ = external system clock input / 2 (Hz)
- * BAUD is desired baudrate (bits/s)
- *
- * NOTE: we add (divisor/2) to numerator to round for
- * more precision
- */
- reg = (((get_PLLCLK()/2) + ((16*gd->baudrate)/2)) / (16 * gd->baudrate)) - 1;
- uart->brcon = reg;
-
- for (i = 0; i < 100; i++);
-}
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-static int lh7a40x_serial_init(void)
-{
- lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
-
- /* UART must be enabled before writing to any config registers */
- uart->con |= (UART_EN);
-
-#ifdef CONFIG_CONSOLE_UART1
- /* infrared disabled */
- uart->con |= UART_SIRD;
-#endif
- /* loopback disabled */
- uart->con &= ~(UART_LBE);
-
- /* modem lines and tx/rx polarities */
- uart->con &= ~(UART_MXP | UART_TXP | UART_RXP);
-
- /* FIFO enable, N81 */
- uart->fcon = (UART_WLEN_8 | UART_FEN | UART_STP2_1);
-
- /* set baudrate */
- serial_setbrg ();
-
- /* enable rx interrupt */
- uart->inten |= UART_RI;
-
- return (0);
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-static int lh7a40x_serial_getc(void)
-{
- lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
-
- /* wait for character to arrive */
- while (uart->status & UART_RXFE);
-
- return(uart->data & 0xff);
-}
-
-#ifdef CONFIG_HWFLOW
-static int hwflow = 0; /* turned off by default */
-int hwflow_onoff(int on)
-{
- switch(on) {
- case 0:
- default:
- break; /* return current */
- case 1:
- hwflow = 1; /* turn on */
- break;
- case -1:
- hwflow = 0; /* turn off */
- break;
- }
- return hwflow;
-}
-#endif
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int be_quiet = 0;
-void disable_putc(void)
-{
- be_quiet = 1;
-}
-
-void enable_putc(void)
-{
- be_quiet = 0;
-}
-#endif
-
-
-/*
- * Output a single byte to the serial port.
- */
-static void lh7a40x_serial_putc(const char c)
-{
- lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
-
-#ifdef CONFIG_MODEM_SUPPORT
- if (be_quiet)
- return;
-#endif
-
- /* wait for room in the tx FIFO */
- while (!(uart->status & UART_TXFE));
-
-#ifdef CONFIG_HWFLOW
- /* Wait for CTS up */
- while(hwflow && !(uart->status & UART_CTS));
-#endif
-
- uart->data = c;
-
- /* If \n, also do \r */
- if (c == '\n')
- serial_putc ('\r');
-}
-
-/*
- * Test whether a character is in the RX buffer
- */
-static int lh7a40x_serial_tstc(void)
-{
- lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
-
- return(!(uart->status & UART_RXFE));
-}
-
-static void lh7a40x_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-static struct serial_device lh7a40x_serial_drv = {
- .name = "lh7a40x_serial",
- .start = lh7a40x_serial_init,
- .stop = NULL,
- .setbrg = lh7a40x_serial_setbrg,
- .putc = lh7a40x_serial_putc,
- .puts = lh7a40x_serial_puts,
- .getc = lh7a40x_serial_getc,
- .tstc = lh7a40x_serial_tstc,
-};
-
-void lh7a40x_serial_initialize(void)
-{
- serial_register(&lh7a40x_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &lh7a40x_serial_drv;
-}
+++ /dev/null
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void lpc2292_serial_setbrg(void)
-{
- unsigned short divisor = 0;
-
- switch (gd->baudrate) {
- case 1200: divisor = 3072; break;
- case 9600: divisor = 384; break;
- case 19200: divisor = 192; break;
- case 38400: divisor = 96; break;
- case 57600: divisor = 64; break;
- case 115200: divisor = 32; break;
- default: hang (); break;
- }
-
- /* init serial UART0 */
- PUT8(U0LCR, 0);
- PUT8(U0IER, 0);
- PUT8(U0LCR, 0x80); /* DLAB=1 */
- PUT8(U0DLL, (unsigned char)(divisor & 0x00FF));
- PUT8(U0DLM, (unsigned char)(divisor >> 8));
- PUT8(U0LCR, 0x03); /* 8N1, DLAB=0 */
- PUT8(U0FCR, 1); /* Enable RX and TX FIFOs */
-}
-
-static int lpc2292_serial_init(void)
-{
- unsigned long pinsel0;
-
- serial_setbrg ();
-
- pinsel0 = GET32(PINSEL0);
- pinsel0 &= ~(0x00000003);
- pinsel0 |= 5;
- PUT32(PINSEL0, pinsel0);
-
- return (0);
-}
-
-static void lpc2292_serial_putc(const char c)
-{
- if (c == '\n')
- {
- while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */
- PUT8(U0THR, '\r');
- }
-
- while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */
- PUT8(U0THR, c);
-}
-
-static int lpc2292_serial_getc(void)
-{
- while((GET8(U0LSR) & 1) == 0);
- return GET8(U0RBR);
-}
-
-static void lpc2292_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-/* Test if there is a byte to read */
-static int lpc2292_serial_tstc(void)
-{
- return (GET8(U0LSR) & 1);
-}
-
-static struct serial_device lpc2292_serial_drv = {
- .name = "lpc2292_serial",
- .start = lpc2292_serial_init,
- .stop = NULL,
- .setbrg = lpc2292_serial_setbrg,
- .putc = lpc2292_serial_putc,
- .puts = lpc2292_serial_puts,
- .getc = lpc2292_serial_getc,
- .tstc = lpc2292_serial_tstc,
-};
-
-void lpc2292_serial_initialize(void)
-{
- serial_register(&lpc2292_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &lpc2292_serial_drv;
-}
return 1;
}
-static void mxc_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
.stop = NULL,
.setbrg = mxc_serial_setbrg,
.putc = mxc_serial_putc,
- .puts = mxc_serial_puts,
+ .puts = default_serial_puts,
.getc = mxc_serial_getc,
.tstc = mxc_serial_tstc,
};
+++ /dev/null
-/*
- * Serial Port stuff - taken from Linux
- *
- * (C) Copyright 2002
- * MAZeT GmbH <www.mazet.de>
- * Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
- *
- * (c) 2004
- * IMMS gGmbH <www.imms.de>
- * Thomas Elste <info@elste.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <asm/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PORTA (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA))
-#if !defined(CONFIG_NETARM_NS7520)
-#define PORTB (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB))
-#else
-#define PORTC (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTC))
-#endif
-
-/* wait until transmitter is ready for another character */
-#define TXWAITRDY(registers) \
-{ \
- ulong tmo = get_timer(0) + 1 * CONFIG_SYS_HZ; \
- while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 ) { \
- if (get_timer(0) > tmo) \
- break; \
- } \
-}
-
-
-volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(0);
-volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(1);
-
-extern void _netarm_led_FAIL1(void);
-
-/*
- * Setup both serial i/f with given baudrate
- */
-static void netarm_serial_setbrg(void)
-{
- /* set 0 ... make sure pins are configured for serial */
-#if !defined(CONFIG_NETARM_NS7520)
- PORTA = PORTB =
- NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
-#else
- PORTA = NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
- PORTC = NETARM_GEN_PORT_CSF (0xef) | NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
-#endif
-
- /* first turn em off */
- serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = 0;
-
- /* clear match register, we don't need it */
- serial_reg_ch1->rx_match = serial_reg_ch2->rx_match = 0;
-
- /* setup bit rate generator and rx buffer gap timer (1 byte only) */
- if ((gd->baudrate >= MIN_BAUD_RATE)
- && (gd->baudrate <= MAX_BAUD_RATE)) {
- serial_reg_ch1->bitrate = serial_reg_ch2->bitrate =
- NETARM_SER_BR_X16 (gd->baudrate);
- serial_reg_ch1->rx_buf_timer = serial_reg_ch2->rx_buf_timer =
- 0;
- serial_reg_ch1->rx_char_timer = serial_reg_ch2->rx_char_timer =
- NETARM_SER_RXGAP (gd->baudrate);
- } else {
- hang ();
- }
-
- /* setup port mode */
- serial_reg_ch1->ctrl_b = serial_reg_ch2->ctrl_b =
- ( NETARM_SER_CTLB_RCGT_EN |
- NETARM_SER_CTLB_UART_MODE);
- serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a =
- ( NETARM_SER_CTLA_ENABLE |
- NETARM_SER_CTLA_P_NONE |
- /* see errata */
- NETARM_SER_CTLA_2STOP |
- NETARM_SER_CTLA_8BITS |
- NETARM_SER_CTLA_DTR_EN |
- NETARM_SER_CTLA_RTS_EN);
-}
-
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- */
-static int netarm_serial_init(void)
-{
- serial_setbrg ();
- return 0;
-}
-
-
-/*
- * Output a single byte to the serial port.
- */
-static void netarm_serial_putc(const char c)
-{
- volatile unsigned char *fifo;
-
- /* If \n, also do \r */
- if (c == '\n')
- serial_putc ('\r');
-
- fifo = (volatile unsigned char *) &(serial_reg_ch1->fifo);
- TXWAITRDY (serial_reg_ch1);
- *fifo = c;
-}
-
-/*
- * Test of a single byte from the serial port. Returns 1 on success, 0
- * otherwise.
- */
-static int netarm_serial_tstc(void)
-{
- return serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY;
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise.
- */
-static int netarm_serial_getc(void)
-{
- unsigned int ch_uint;
- volatile unsigned int *fifo;
- volatile unsigned char *fifo_char = NULL;
- int buf_count = 0;
-
- while (!(serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY))
- /* NOP */ ;
-
- fifo = (volatile unsigned int *) &(serial_reg_ch1->fifo);
- fifo_char = (unsigned char *) &ch_uint;
- ch_uint = *fifo;
-
- buf_count = NETARM_SER_STATA_RXFDB (serial_reg_ch1->status_a);
- switch (buf_count) {
- case NETARM_SER_STATA_RXFDB_4BYTES:
- buf_count = 4;
- break;
- case NETARM_SER_STATA_RXFDB_3BYTES:
- buf_count = 3;
- break;
- case NETARM_SER_STATA_RXFDB_2BYTES:
- buf_count = 2;
- break;
- case NETARM_SER_STATA_RXFDB_1BYTES:
- buf_count = 1;
- break;
- default:
- /* panic, be never here */
- break;
- }
-
- serial_reg_ch1->status_a |= NETARM_SER_STATA_RX_CLOSED;
-
- return ch_uint & 0xff;
-}
-
-static void netarm_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-static struct serial_device netarm_serial_drv = {
- .name = "netarm_serial",
- .start = netarm_serial_init,
- .stop = NULL,
- .setbrg = netarm_serial_setbrg,
- .putc = netarm_serial_putc,
- .puts = netarm_serial_puts,
- .getc = netarm_serial_getc,
- .tstc = netarm_serial_tstc,
-};
-
-void netarm_serial_initialize(void)
-{
- serial_register(&netarm_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &netarm_serial_drv;
-}
DECLARE_GLOBAL_DATA_PTR;
#if !defined(CONFIG_CONS_INDEX)
-#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4)
+#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 6)
#error "Invalid console index value."
#endif
#error "Console port 3 defined but not configured."
#elif CONFIG_CONS_INDEX == 4 && !defined(CONFIG_SYS_NS16550_COM4)
#error "Console port 4 defined but not configured."
+#elif CONFIG_CONS_INDEX == 5 && !defined(CONFIG_SYS_NS16550_COM5)
+#error "Console port 5 defined but not configured."
+#elif CONFIG_CONS_INDEX == 6 && !defined(CONFIG_SYS_NS16550_COM6)
+#error "Console port 6 defined but not configured."
#endif
/* Note: The port number specified in the functions is 1 based.
* the array is 0 based.
*/
-static NS16550_t serial_ports[4] = {
+static NS16550_t serial_ports[6] = {
#ifdef CONFIG_SYS_NS16550_COM1
(NS16550_t)CONFIG_SYS_NS16550_COM1,
#else
NULL,
#endif
#ifdef CONFIG_SYS_NS16550_COM4
- (NS16550_t)CONFIG_SYS_NS16550_COM4
+ (NS16550_t)CONFIG_SYS_NS16550_COM4,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_SYS_NS16550_COM5
+ (NS16550_t)CONFIG_SYS_NS16550_COM5,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_SYS_NS16550_COM6
+ (NS16550_t)CONFIG_SYS_NS16550_COM6
#else
NULL
#endif
/* Multi serial device functions */
#define DECLARE_ESERIAL_FUNCTIONS(port) \
- int eserial##port##_init (void) {\
- int clock_divisor; \
- clock_divisor = calc_divisor(serial_ports[port-1]); \
- NS16550_init(serial_ports[port-1], clock_divisor); \
- return(0);}\
- void eserial##port##_setbrg (void) {\
- serial_setbrg_dev(port);}\
- int eserial##port##_getc (void) {\
- return serial_getc_dev(port);}\
- int eserial##port##_tstc (void) {\
- return serial_tstc_dev(port);}\
- void eserial##port##_putc (const char c) {\
- serial_putc_dev(port, c);}\
- void eserial##port##_puts (const char *s) {\
- serial_puts_dev(port, s);}
+ static int eserial##port##_init(void) \
+ { \
+ int clock_divisor; \
+ clock_divisor = calc_divisor(serial_ports[port-1]); \
+ NS16550_init(serial_ports[port-1], clock_divisor); \
+ return 0 ; \
+ } \
+ static void eserial##port##_setbrg(void) \
+ { \
+ serial_setbrg_dev(port); \
+ } \
+ static int eserial##port##_getc(void) \
+ { \
+ return serial_getc_dev(port); \
+ } \
+ static int eserial##port##_tstc(void) \
+ { \
+ return serial_tstc_dev(port); \
+ } \
+ static void eserial##port##_putc(const char c) \
+ { \
+ serial_putc_dev(port, c); \
+ } \
+ static void eserial##port##_puts(const char *s) \
+ { \
+ serial_puts_dev(port, s); \
+ }
/* Serial device descriptor */
#define INIT_ESERIAL_STRUCTURE(port, __name) { \
DECLARE_ESERIAL_FUNCTIONS(4);
struct serial_device eserial4_device =
INIT_ESERIAL_STRUCTURE(4, "eserial3");
+DECLARE_ESERIAL_FUNCTIONS(5);
+struct serial_device eserial5_device =
+ INIT_ESERIAL_STRUCTURE(5, "eserial4");
+DECLARE_ESERIAL_FUNCTIONS(6);
+struct serial_device eserial6_device =
+ INIT_ESERIAL_STRUCTURE(6, "eserial5");
__weak struct serial_device *default_serial_console(void)
{
return &eserial3_device;
#elif CONFIG_CONS_INDEX == 4
return &eserial4_device;
+#elif CONFIG_CONS_INDEX == 5
+ return &eserial5_device;
+#elif CONFIG_CONS_INDEX == 6
+ return &eserial6_device;
#else
#error "Bad CONFIG_CONS_INDEX."
#endif
#if defined(CONFIG_SYS_NS16550_COM4)
serial_register(&eserial4_device);
#endif
+#if defined(CONFIG_SYS_NS16550_COM5)
+ serial_register(&eserial5_device);
+#endif
+#if defined(CONFIG_SYS_NS16550_COM6)
+ serial_register(&eserial6_device);
+#endif
}
pl01x_putc (CONSOLE_PORT, c);
}
-static void pl01x_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
static int pl01x_serial_getc(void)
{
return pl01x_getc (CONSOLE_PORT);
.stop = NULL,
.setbrg = pl01x_serial_setbrg,
.putc = pl01x_serial_putc,
- .puts = pl01x_serial_puts,
+ .puts = default_serial_puts,
.getc = pl01x_serial_getc,
.tstc = pl01x_serial_tstc,
};
}
}
-static void s3c44b0_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
static struct serial_device s3c44b0_serial_drv = {
.name = "s3c44b0_serial",
.start = s3c44b0_serial_init,
.stop = NULL,
.setbrg = s3c44b0_serial_setbrg,
.putc = s3c44b0_serial_putc,
- .puts = s3c44b0_serial_puts,
+ .puts = default_serial_puts,
.getc = s3c44b0_serial_getc,
.tstc = s3c44b0_serial_tstc,
};
#endif
}
-static void sa1100_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
static struct serial_device sa1100_serial_drv = {
.name = "sa1100_serial",
.start = sa1100_serial_init,
.stop = NULL,
.setbrg = sa1100_serial_setbrg,
.putc = sa1100_serial_putc,
- .puts = sa1100_serial_puts,
+ .puts = default_serial_puts,
.getc = sa1100_serial_getc,
.tstc = sa1100_serial_tstc,
};
serial_raw_putc(c);
}
-static void sh_serial_puts(const char *s)
-{
- char c;
- while ((c = *s++) != 0)
- serial_putc(c);
-}
-
static int sh_serial_tstc(void)
{
return serial_rx_fifo_level() ? 1 : 0;
.stop = NULL,
.setbrg = sh_serial_setbrg,
.putc = sh_serial_putc,
- .puts = sh_serial_puts,
+ .puts = default_serial_puts,
.getc = sh_serial_getc,
.tstc = sh_serial_tstc,
};
return 1;
}
memcpy(buffer, cmd_buf, cmd_len);
- if (cmd_len != 1) {
- if (data_in == NULL)
- memcpy(buffer + cmd_len, data_out, data_len);
- }
+ if (data_in == NULL)
+ memcpy(buffer + cmd_len, data_out, data_len);
break;
case SPI_XFER_BEGIN | SPI_XFER_END:
len = data_len;
/* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS
* REVISIT: this controller could support SPI_3WIRE mode.
*/
-#ifdef CONFIG_AM33XX
+#ifdef CONFIG_OMAP3_SPI_D0_D1_SWAPPED
/*
- * The reference design on AM33xx has D0 and D1 wired up opposite
- * of how it has been done on previous platforms. We assume that
- * custom hardware will also follow this convention.
+ * Some boards have D0 wired as MOSI / D1 as MISO instead of
+ * The normal D0 as MISO / D1 as MOSI.
*/
- conf &= OMAP3_MCSPI_CHCONF_DPE0;
- conf |= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
+ conf &= ~OMAP3_MCSPI_CHCONF_DPE0;
+ conf |= OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1;
#else
conf &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
conf |= OMAP3_MCSPI_CHCONF_DPE0;
p = q;
}
- if (i == 6) /* it looks ok */
- return 1;
+ /* Now check the contents. */
+ return is_valid_ether_addr(ea);
}
return 0;
}
#define gadget_is_sa1100(g) 0
#endif
-#ifdef CONFIG_USB_GADGET_LH7A40X
-#define gadget_is_lh7a40x(g) (!strcmp("lh7a40x_udc", (g)->name))
-#else
-#define gadget_is_lh7a40x(g) 0
-#endif
-
/* handhelds.org tree (?) */
#ifdef CONFIG_USB_GADGET_MQ11XX
#define gadget_is_mq11xx(g) (!strcmp("mq11xx_udc", (g)->name))
return 0x07;
else if (gadget_is_omap(gadget))
return 0x08;
- else if (gadget_is_lh7a40x(gadget))
- return 0x09;
else if (gadget_is_n9604(gadget))
- return 0x10;
+ return 0x09;
else if (gadget_is_pxa27x(gadget))
- return 0x11;
+ return 0x10;
else if (gadget_is_s3c2410(gadget))
- return 0x12;
+ return 0x11;
else if (gadget_is_at91(gadget))
- return 0x13;
+ return 0x12;
else if (gadget_is_imx(gadget))
- return 0x14;
+ return 0x13;
else if (gadget_is_musbhsfc(gadget))
- return 0x15;
+ return 0x14;
else if (gadget_is_musbhdrc(gadget))
- return 0x16;
+ return 0x15;
else if (gadget_is_mpc8272(gadget))
- return 0x17;
+ return 0x16;
else if (gadget_is_atmel_usba(gadget))
- return 0x18;
+ return 0x17;
else if (gadget_is_fsl_usb2(gadget))
- return 0x19;
+ return 0x18;
else if (gadget_is_amd5536udc(gadget))
- return 0x20;
+ return 0x19;
else if (gadget_is_m66592(gadget))
- return 0x21;
+ return 0x20;
else if (gadget_is_mv(gadget))
- return 0x22;
+ return 0x21;
return -ENOENT;
}
COBJS-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
COBJS-$(CONFIG_USB_S3C64XX) += s3c64xx-hcd.o
COBJS-$(CONFIG_USB_SL811HS) += sl811-hcd.o
+COBJS-$(CONFIG_USB_OHCI_S3C24XX) += ohci-s3c24xx.o
# echi
COBJS-$(CONFIG_USB_EHCI) += ehci-hcd.o
#include "ehci.h"
+/* Check USB PHY clock valid */
+static int usb_phy_clk_valid(struct usb_ehci *ehci)
+{
+ if (!((in_be32(&ehci->control) & PHY_CLK_VALID) ||
+ in_be32(&ehci->prictrl))) {
+ printf("USB PHY clock invalid!\n");
+ return 0;
+ } else {
+ return 1;
+ }
+}
+
/*
* Create the appropriate control structures to manage
* a new EHCI host controller.
udelay(1000); /* delay required for PHY Clk to appear */
#endif
out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI);
+ setbits_be32(&ehci->control, USB_EN);
} else {
-#if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
- clrbits_be32(&ehci->control, UTMI_PHY_EN);
setbits_be32(&ehci->control, PHY_CLK_SEL_ULPI);
+ clrsetbits_be32(&ehci->control, UTMI_PHY_EN, USB_EN);
udelay(1000); /* delay required for PHY Clk to appear */
-#endif
+ if (!usb_phy_clk_valid(ehci))
+ return -EINVAL;
out_le32(&(*hcor)->or_portsc[0], PORT_PTS_ULPI);
}
- /* Enable interface. */
- setbits_be32(&ehci->control, USB_EN);
-
out_be32(&ehci->prictrl, 0x0000000c);
out_be32(&ehci->age_cnt_limit, 0x00000040);
out_be32(&ehci->sictrl, 0x00000001);
#include <asm/io.h>
#include <malloc.h>
#include <usb.h>
-#include "usb_ohci.h"
+#include "ohci-s3c24xx.h"
#define OHCI_USE_NPS /* force NoPowerSwitching mode */
#undef OHCI_VERBOSE_DEBUG /* not always helpful */
}
#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0) */
+
+#if defined(CONFIG_USB_OHCI_NEW) && \
+ defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
+ defined(CONFIG_S3C24X0)
+
+int usb_cpu_init(void)
+{
+ struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+ struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
+
+ /*
+ * Set the 48 MHz UPLL clocking. Values are taken from
+ * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
+ */
+ writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon);
+ /* 1 = use pads related USB for USB host */
+ writel(readl(&gpio->misccr) | 0x8, &gpio->misccr);
+
+ /*
+ * Enable USB host clock.
+ */
+ writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
+
+ return 0;
+}
+
+int usb_cpu_stop(void)
+{
+ struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+ /* may not want to do this */
+ writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
+ return 0;
+}
+
+int usb_cpu_init_fail(void)
+{
+ struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+ writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
+ return 0;
+}
+
+#endif /* defined(CONFIG_USB_OHCI_NEW) && \
+ defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
+ defined(CONFIG_S3C24X0) */
static void musb_peri_rx_ep(unsigned int ep)
{
- u16 peri_rxcount = readw(&musbr->ep[ep].epN.rxcount);
+ u16 peri_rxcount;
+ u8 peri_rxcsr = readw(&musbr->ep[ep].epN.rxcsr);
+ if (!(peri_rxcsr & MUSB_RXCSR_RXPKTRDY)) {
+ if (debug_level > 0)
+ serial_printf("ERROR : %s %d without MUSB_RXCSR_RXPKTRDY set\n",
+ __PRETTY_FUNCTION__, ep);
+ return;
+ }
+
+ peri_rxcount = readw(&musbr->ep[ep].epN.rxcount);
if (peri_rxcount) {
struct usb_endpoint_instance *endpoint;
u32 length;
static int cfb_do_flush_cache;
+#ifdef CONFIG_CFB_CONSOLE_ANSI
+static char ansi_buf[10];
+static int ansi_buf_size;
+static int ansi_colors_need_revert;
+static int ansi_cursor_hidden;
+#endif
+
static const int video_font_draw_table8[] = {
0x00000000, 0x000000ff, 0x0000ff00, 0x0000ffff,
0x00ff0000, 0x00ff00ff, 0x00ffff00, 0x00ffffff,
}
}
-static void console_newline(void)
+#ifdef CONFIG_CFB_CONSOLE_ANSI
+
+static void console_clear(void)
+{
+#ifdef VIDEO_HW_RECTFILL
+ video_hw_rectfill(VIDEO_PIXEL_SIZE, /* bytes per pixel */
+ 0, /* dest pos x */
+ video_logo_height, /* dest pos y */
+ VIDEO_VISIBLE_COLS, /* frame width */
+ VIDEO_VISIBLE_ROWS, /* frame height */
+ bgx /* fill color */
+ );
+#else
+ memsetl(CONSOLE_ROW_FIRST, CONSOLE_SIZE, bgx);
+#endif
+}
+
+static void console_cursor_fix(void)
+{
+ if (console_row < 0)
+ console_row = 0;
+ if (console_row >= CONSOLE_ROWS)
+ console_row = CONSOLE_ROWS - 1;
+ if (console_col < 0)
+ console_col = 0;
+ if (console_col >= CONSOLE_COLS)
+ console_col = CONSOLE_COLS - 1;
+}
+
+static void console_cursor_up(int n)
+{
+ console_row -= n;
+ console_cursor_fix();
+}
+
+static void console_cursor_down(int n)
+{
+ console_row += n;
+ console_cursor_fix();
+}
+
+static void console_cursor_left(int n)
+{
+ console_col -= n;
+ console_cursor_fix();
+}
+
+static void console_cursor_right(int n)
+{
+ console_col += n;
+ console_cursor_fix();
+}
+
+static void console_cursor_set_position(int row, int col)
+{
+ if (console_row != -1)
+ console_row = row;
+ if (console_col != -1)
+ console_col = col;
+ console_cursor_fix();
+}
+
+static void console_previousline(int n)
{
- console_row++;
+ /* FIXME: also scroll terminal ? */
+ console_row -= n;
+ console_cursor_fix();
+}
+
+static void console_swap_colors(void)
+{
+ eorx = fgx;
+ fgx = bgx;
+ bgx = eorx;
+ eorx = fgx ^ bgx;
+}
+
+static inline int console_cursor_is_visible(void)
+{
+ return !ansi_cursor_hidden;
+}
+#else
+static inline int console_cursor_is_visible(void)
+{
+ return 1;
+}
+#endif
+
+static void console_newline(int n)
+{
+ console_row += n;
console_col = 0;
/* Check if we need to scroll the terminal */
console_scrollup();
/* Decrement row number */
- console_row--;
+ console_row = CONSOLE_ROWS - 1;
}
}
console_col = 0;
}
-void video_putc(const char c)
+static void parse_putc(const char c)
{
static int nl = 1;
- CURSOR_OFF;
+ if (console_cursor_is_visible())
+ CURSOR_OFF;
switch (c) {
case 13: /* back to first column */
case '\n': /* next line */
if (console_col || (!console_col && nl))
- console_newline();
+ console_newline(1);
nl = 1;
break;
console_col &= ~0x0007;
if (console_col >= CONSOLE_COLS)
- console_newline();
+ console_newline(1);
break;
case 8: /* backspace */
/* check for newline */
if (console_col >= CONSOLE_COLS) {
- console_newline();
+ console_newline(1);
nl = 0;
}
}
- CURSOR_SET;
+
+ if (console_cursor_is_visible())
+ CURSOR_SET;
+}
+
+void video_putc(const char c)
+{
+#ifdef CONFIG_CFB_CONSOLE_ANSI
+ int i;
+
+ if (c == 27) {
+ for (i = 0; i < ansi_buf_size; ++i)
+ parse_putc(ansi_buf[i]);
+ ansi_buf[0] = 27;
+ ansi_buf_size = 1;
+ return;
+ }
+
+ if (ansi_buf_size > 0) {
+ /*
+ * 0 - ESC
+ * 1 - [
+ * 2 - num1
+ * 3 - ..
+ * 4 - ;
+ * 5 - num2
+ * 6 - ..
+ * - cchar
+ */
+ int next = 0;
+
+ int flush = 0;
+ int fail = 0;
+
+ int num1 = 0;
+ int num2 = 0;
+ int cchar = 0;
+
+ ansi_buf[ansi_buf_size++] = c;
+
+ if (ansi_buf_size >= sizeof(ansi_buf))
+ fail = 1;
+
+ for (i = 0; i < ansi_buf_size; ++i) {
+ if (fail)
+ break;
+
+ switch (next) {
+ case 0:
+ if (ansi_buf[i] == 27)
+ next = 1;
+ else
+ fail = 1;
+ break;
+
+ case 1:
+ if (ansi_buf[i] == '[')
+ next = 2;
+ else
+ fail = 1;
+ break;
+
+ case 2:
+ if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+ num1 = ansi_buf[i]-'0';
+ next = 3;
+ } else if (ansi_buf[i] != '?') {
+ --i;
+ num1 = 1;
+ next = 4;
+ }
+ break;
+
+ case 3:
+ if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+ num1 *= 10;
+ num1 += ansi_buf[i]-'0';
+ } else {
+ --i;
+ next = 4;
+ }
+ break;
+
+ case 4:
+ if (ansi_buf[i] != ';') {
+ --i;
+ next = 7;
+ } else
+ next = 5;
+ break;
+
+ case 5:
+ if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+ num2 = ansi_buf[i]-'0';
+ next = 6;
+ } else
+ fail = 1;
+ break;
+
+ case 6:
+ if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+ num2 *= 10;
+ num2 += ansi_buf[i]-'0';
+ } else {
+ --i;
+ next = 7;
+ }
+ break;
+
+ case 7:
+ if ((ansi_buf[i] >= 'A' && ansi_buf[i] <= 'H')
+ || ansi_buf[i] == 'J'
+ || ansi_buf[i] == 'K'
+ || ansi_buf[i] == 'h'
+ || ansi_buf[i] == 'l'
+ || ansi_buf[i] == 'm') {
+ cchar = ansi_buf[i];
+ flush = 1;
+ } else
+ fail = 1;
+ break;
+ }
+ }
+
+ if (fail) {
+ for (i = 0; i < ansi_buf_size; ++i)
+ parse_putc(ansi_buf[i]);
+ ansi_buf_size = 0;
+ return;
+ }
+
+ if (flush) {
+ if (!ansi_cursor_hidden)
+ CURSOR_OFF;
+ ansi_buf_size = 0;
+ switch (cchar) {
+ case 'A':
+ /* move cursor num1 rows up */
+ console_cursor_up(num1);
+ break;
+ case 'B':
+ /* move cursor num1 rows down */
+ console_cursor_down(num1);
+ break;
+ case 'C':
+ /* move cursor num1 columns forward */
+ console_cursor_right(num1);
+ break;
+ case 'D':
+ /* move cursor num1 columns back */
+ console_cursor_left(num1);
+ break;
+ case 'E':
+ /* move cursor num1 rows up at begin of row */
+ console_previousline(num1);
+ break;
+ case 'F':
+ /* move cursor num1 rows down at begin of row */
+ console_newline(num1);
+ break;
+ case 'G':
+ /* move cursor to column num1 */
+ console_cursor_set_position(-1, num1-1);
+ break;
+ case 'H':
+ /* move cursor to row num1, column num2 */
+ console_cursor_set_position(num1-1, num2-1);
+ break;
+ case 'J':
+ /* clear console and move cursor to 0, 0 */
+ console_clear();
+ console_cursor_set_position(0, 0);
+ break;
+ case 'K':
+ /* clear line */
+ if (num1 == 0)
+ console_clear_line(console_row,
+ console_col,
+ CONSOLE_COLS-1);
+ else if (num1 == 1)
+ console_clear_line(console_row,
+ 0, console_col);
+ else
+ console_clear_line(console_row,
+ 0, CONSOLE_COLS-1);
+ break;
+ case 'h':
+ ansi_cursor_hidden = 0;
+ break;
+ case 'l':
+ ansi_cursor_hidden = 1;
+ break;
+ case 'm':
+ if (num1 == 0) { /* reset swapped colors */
+ if (ansi_colors_need_revert) {
+ console_swap_colors();
+ ansi_colors_need_revert = 0;
+ }
+ } else if (num1 == 7) { /* once swap colors */
+ if (!ansi_colors_need_revert) {
+ console_swap_colors();
+ ansi_colors_need_revert = 1;
+ }
+ }
+ break;
+ }
+ if (!ansi_cursor_hidden)
+ CURSOR_SET;
+ }
+ } else {
+ parse_putc(c);
+ }
+#else
+ parse_putc(c);
+#endif
}
void video_puts(const char *s)
COBJS-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
COBJS-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
+COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
+ * (C) Copyright 2003
+ * Wolfgang Denk Engineering, <wd@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
* MA 02111-1307 USA
*/
+/*
+OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+*/
+OUTPUT_FORMAT("elf64-tradbigmips", "elf64-tradbigmips", "elf64-tradlittlemips")
+OUTPUT_ARCH(mips)
+SECTIONS
+{
+ .text :
+ {
+ *(.text*)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-#ifndef _FPGA_H_
-#define _FPGA_H_
+ . = ALIGN(4);
+ .data : { *(.data*) }
-#define FPGA_INIT_IS_HIGH 0
-#define FPGA_INIT_SET_HIGH 1
-#define FPGA_INIT_SET_LOW 2
-#define FPGA_PROG_SET_HIGH 3
-#define FPGA_PROG_SET_LOW 4
-#define FPGA_DONE_IS_HIGH 5
-#define FPGA_READ_MODE 6
-#define FPGA_LOAD_MODE 7
-#define FPGA_GET_ID 8
-#define FPGA_INIT_PORTS 9
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
-#define FPGA_NAME_LEN 8
-typedef struct {
- char name[FPGA_NAME_LEN];
- ulong conf_base;
- uint init_mask;
- uint prog_mask;
- uint done_mask;
-} fpga_t;
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
-extern fpga_t fpga_list[];
-extern int fpga_count;
+ .sdata : { *(.sdata*) }
-ulong fpga_control (fpga_t* fpga, int cmd);
+ . = ALIGN(4);
+ __bss_start = .;
+ .sbss (NOLOAD) : { *(.sbss*) }
+ .bss (NOLOAD) : { *(.bss*) . = ALIGN(4); }
-#endif /* _FPGA_H_ */
+ _end = .;
+}
{
*(.data)
}
+
. = ALIGN(4);
__data_end = .;
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
#
# See file CREDITS for list of people who contributed to this
# project.
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
-#
-subdirs-$(CONFIG_CMD_CRAMFS) := cramfs
-subdirs-$(CONFIG_CMD_EXT4) += ext4
-ifndef CONFIG_CMD_EXT4
-subdirs-$(CONFIG_CMD_EXT2) += ext4
-endif
-subdirs-$(CONFIG_CMD_FAT) += fat
-subdirs-$(CONFIG_CMD_FDOS) += fdos
-subdirs-$(CONFIG_CMD_JFFS2) += jffs2
-subdirs-$(CONFIG_CMD_REISER) += reiserfs
-subdirs-$(CONFIG_YAFFS2) += yaffs2
-subdirs-$(CONFIG_CMD_UBIFS) += ubifs
-subdirs-$(CONFIG_CMD_ZFS) += zfs
-
-SUBDIRS := $(subdirs-y)
-
-$(obj).depend all:
- @for dir in $(SUBDIRS) ; do \
- $(MAKE) -C $$dir $@ ; done
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)libfs.o
+
+COBJS-y += fs.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
# See file CREDITS for list of people who contributed to this
# project.
#
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).o
+LIB = $(obj)libcbfs.o
+
+COBJS-$(CONFIG_CMD_CBFS) := cbfs.o
-COBJS = $(BOARD).o flash.o
+SRCS := $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
+all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
+
#########################################################################
# defines $(obj).depend target
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <cbfs.h>
+#include <malloc.h>
+#include <asm/byteorder.h>
+
+enum cbfs_result file_cbfs_result;
+
+const char *file_cbfs_error(void)
+{
+ switch (file_cbfs_result) {
+ case CBFS_SUCCESS:
+ return "Success";
+ case CBFS_NOT_INITIALIZED:
+ return "CBFS not initialized";
+ case CBFS_BAD_HEADER:
+ return "Bad CBFS header";
+ case CBFS_BAD_FILE:
+ return "Bad CBFS file";
+ case CBFS_FILE_NOT_FOUND:
+ return "File not found";
+ default:
+ return "Unknown";
+ }
+}
+
+
+static const u32 good_magic = 0x4f524243;
+static const u8 good_file_magic[] = "LARCHIVE";
+
+
+static int initialized;
+static struct cbfs_header cbfs_header;
+static struct cbfs_cachenode *file_cache;
+
+/* Do endian conversion on the CBFS header structure. */
+static void swap_header(struct cbfs_header *dest, struct cbfs_header *src)
+{
+ dest->magic = be32_to_cpu(src->magic);
+ dest->version = be32_to_cpu(src->version);
+ dest->rom_size = be32_to_cpu(src->rom_size);
+ dest->boot_block_size = be32_to_cpu(src->boot_block_size);
+ dest->align = be32_to_cpu(src->align);
+ dest->offset = be32_to_cpu(src->offset);
+}
+
+/* Do endian conversion on a CBFS file header. */
+static void swap_file_header(struct cbfs_fileheader *dest,
+ const struct cbfs_fileheader *src)
+{
+ memcpy(&dest->magic, &src->magic, sizeof(dest->magic));
+ dest->len = be32_to_cpu(src->len);
+ dest->type = be32_to_cpu(src->type);
+ dest->checksum = be32_to_cpu(src->checksum);
+ dest->offset = be32_to_cpu(src->offset);
+}
+
+/*
+ * Given a starting position in memory, scan forward, bounded by a size, and
+ * find the next valid CBFS file. No memory is allocated by this function. The
+ * caller is responsible for allocating space for the new file structure.
+ *
+ * @param start The location in memory to start from.
+ * @param size The size of the memory region to search.
+ * @param align The alignment boundaries to check on.
+ * @param newNode A pointer to the file structure to load.
+ * @param used A pointer to the count of of bytes scanned through,
+ * including the file if one is found.
+ *
+ * @return 1 if a file is found, 0 if one isn't.
+ */
+static int file_cbfs_next_file(u8 *start, u32 size, u32 align,
+ struct cbfs_cachenode *newNode, u32 *used)
+{
+ struct cbfs_fileheader header;
+
+ *used = 0;
+
+ while (size >= align) {
+ const struct cbfs_fileheader *fileHeader =
+ (const struct cbfs_fileheader *)start;
+ u32 name_len;
+ u32 step;
+
+ /* Check if there's a file here. */
+ if (memcmp(good_file_magic, &(fileHeader->magic),
+ sizeof(fileHeader->magic))) {
+ *used += align;
+ size -= align;
+ start += align;
+ continue;
+ }
+
+ swap_file_header(&header, fileHeader);
+ if (header.offset < sizeof(const struct cbfs_cachenode *) ||
+ header.offset > header.len) {
+ file_cbfs_result = CBFS_BAD_FILE;
+ return -1;
+ }
+ newNode->next = NULL;
+ newNode->type = header.type;
+ newNode->data = start + header.offset;
+ newNode->data_length = header.len;
+ name_len = header.offset - sizeof(struct cbfs_cachenode *);
+ newNode->name = (char *)fileHeader +
+ sizeof(struct cbfs_cachenode *);
+ newNode->name_length = name_len;
+ newNode->checksum = header.checksum;
+
+ step = header.len;
+ if (step % align)
+ step = step + align - step % align;
+
+ *used += step;
+ return 1;
+ }
+ return 0;
+}
+
+/* Look through a CBFS instance and copy file metadata into regular memory. */
+static void file_cbfs_fill_cache(u8 *start, u32 size, u32 align)
+{
+ struct cbfs_cachenode *cache_node;
+ struct cbfs_cachenode *newNode;
+ struct cbfs_cachenode **cache_tail = &file_cache;
+
+ /* Clear out old information. */
+ cache_node = file_cache;
+ while (cache_node) {
+ struct cbfs_cachenode *oldNode = cache_node;
+ cache_node = cache_node->next;
+ free(oldNode);
+ }
+ file_cache = NULL;
+
+ while (size >= align) {
+ int result;
+ u32 used;
+
+ newNode = (struct cbfs_cachenode *)
+ malloc(sizeof(struct cbfs_cachenode));
+ result = file_cbfs_next_file(start, size, align,
+ newNode, &used);
+
+ if (result < 0) {
+ free(newNode);
+ return;
+ } else if (result == 0) {
+ free(newNode);
+ break;
+ }
+ *cache_tail = newNode;
+ cache_tail = &newNode->next;
+
+ size -= used;
+ start += used;
+ }
+ file_cbfs_result = CBFS_SUCCESS;
+}
+
+/* Get the CBFS header out of the ROM and do endian conversion. */
+static int file_cbfs_load_header(uintptr_t end_of_rom,
+ struct cbfs_header *header)
+{
+ struct cbfs_header *header_in_rom;
+
+ header_in_rom = (struct cbfs_header *)(uintptr_t)
+ *(u32 *)(end_of_rom - 3);
+ swap_header(header, header_in_rom);
+
+ if (header->magic != good_magic || header->offset >
+ header->rom_size - header->boot_block_size) {
+ file_cbfs_result = CBFS_BAD_HEADER;
+ return 1;
+ }
+ return 0;
+}
+
+void file_cbfs_init(uintptr_t end_of_rom)
+{
+ u8 *start_of_rom;
+ initialized = 0;
+
+ if (file_cbfs_load_header(end_of_rom, &cbfs_header))
+ return;
+
+ start_of_rom = (u8 *)(end_of_rom + 1 - cbfs_header.rom_size);
+
+ file_cbfs_fill_cache(start_of_rom + cbfs_header.offset,
+ cbfs_header.rom_size, cbfs_header.align);
+ if (file_cbfs_result == CBFS_SUCCESS)
+ initialized = 1;
+}
+
+const struct cbfs_header *file_cbfs_get_header(void)
+{
+ if (initialized) {
+ file_cbfs_result = CBFS_SUCCESS;
+ return &cbfs_header;
+ } else {
+ file_cbfs_result = CBFS_NOT_INITIALIZED;
+ return NULL;
+ }
+}
+
+const struct cbfs_cachenode *file_cbfs_get_first(void)
+{
+ if (!initialized) {
+ file_cbfs_result = CBFS_NOT_INITIALIZED;
+ return NULL;
+ } else {
+ file_cbfs_result = CBFS_SUCCESS;
+ return file_cache;
+ }
+}
+
+void file_cbfs_get_next(const struct cbfs_cachenode **file)
+{
+ if (!initialized) {
+ file_cbfs_result = CBFS_NOT_INITIALIZED;
+ file = NULL;
+ return;
+ }
+
+ if (*file)
+ *file = (*file)->next;
+ file_cbfs_result = CBFS_SUCCESS;
+}
+
+const struct cbfs_cachenode *file_cbfs_find(const char *name)
+{
+ struct cbfs_cachenode *cache_node = file_cache;
+
+ if (!initialized) {
+ file_cbfs_result = CBFS_NOT_INITIALIZED;
+ return NULL;
+ }
+
+ while (cache_node) {
+ if (!strcmp(name, cache_node->name))
+ break;
+ cache_node = cache_node->next;
+ }
+ if (!cache_node)
+ file_cbfs_result = CBFS_FILE_NOT_FOUND;
+ else
+ file_cbfs_result = CBFS_SUCCESS;
+
+ return cache_node;
+}
+
+const struct cbfs_cachenode *file_cbfs_find_uncached(uintptr_t end_of_rom,
+ const char *name)
+{
+ u8 *start;
+ u32 size;
+ u32 align;
+ static struct cbfs_cachenode node;
+
+ if (file_cbfs_load_header(end_of_rom, &cbfs_header))
+ return NULL;
+
+ start = (u8 *)(end_of_rom + 1 - cbfs_header.rom_size);
+ size = cbfs_header.rom_size;
+ align = cbfs_header.align;
+
+ while (size >= align) {
+ int result;
+ u32 used;
+
+ result = file_cbfs_next_file(start, size, align, &node, &used);
+
+ if (result < 0)
+ return NULL;
+ else if (result == 0)
+ break;
+
+ if (!strcmp(name, node.name))
+ return &node;
+
+ size -= used;
+ start += used;
+ }
+ file_cbfs_result = CBFS_FILE_NOT_FOUND;
+ return NULL;
+}
+
+const char *file_cbfs_name(const struct cbfs_cachenode *file)
+{
+ file_cbfs_result = CBFS_SUCCESS;
+ return file->name;
+}
+
+u32 file_cbfs_size(const struct cbfs_cachenode *file)
+{
+ file_cbfs_result = CBFS_SUCCESS;
+ return file->data_length;
+}
+
+u32 file_cbfs_type(const struct cbfs_cachenode *file)
+{
+ file_cbfs_result = CBFS_SUCCESS;
+ return file->type;
+}
+
+long file_cbfs_read(const struct cbfs_cachenode *file, void *buffer,
+ unsigned long maxsize)
+{
+ u32 size;
+
+ size = file->data_length;
+ if (maxsize && size > maxsize)
+ size = maxsize;
+
+ memcpy(buffer, file->data, size);
+
+ file_cbfs_result = CBFS_SUCCESS;
+ return size;
+}
LIB = $(obj)libext4fs.o
AOBJS =
-COBJS-$(CONFIG_CMD_EXT4) := ext4fs.o ext4_common.o dev.o
-ifndef CONFIG_CMD_EXT4
-COBJS-$(CONFIG_CMD_EXT2) := ext4fs.o ext4_common.o dev.o
-endif
-COBJS-$(CONFIG_CMD_EXT4_WRITE) += ext4_journal.o crc16.o
+COBJS-$(CONFIG_FS_EXT4) := ext4fs.o ext4_common.o dev.o
+COBJS-$(CONFIG_EXT4_WRITE) += ext4_journal.o crc16.o
SRCS := $(AOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS-y))
struct ext2_inode *g_parent_inode;
static int symlinknest;
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n)
{
uint32_t res = size / n;
#include <ext4fs.h>
#include <malloc.h>
#include <asm/errno.h>
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
#include "ext4_journal.h"
#include "crc16.h"
#endif
int ext4fs_iterate_dir(struct ext2fs_node *dir, char *name,
struct ext2fs_node **fnode, int *ftype);
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n);
int ext4fs_checksum_update(unsigned int i);
int ext4fs_get_parent_inode_num(const char *dirname, char *dname, int flags);
return ext4fs_read_file(ext4fs_file, 0, len, buf);
}
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
static void ext4fs_update(void)
{
short i;
LIB = $(obj)libfat.o
AOBJS =
-COBJS-$(CONFIG_CMD_FAT) := fat.o
+COBJS-$(CONFIG_FS_FAT) := fat.o
COBJS-$(CONFIG_FAT_WRITE):= fat_write.o
ifndef CONFIG_SPL_BUILD
-COBJS-$(CONFIG_CMD_FAT) += file.o
+COBJS-$(CONFIG_FS_FAT) += file.o
endif
SRCS := $(AOBJS:.o=.S) $(COBJS-y:.o=.c)
}
static block_dev_desc_t *cur_dev;
-static unsigned int cur_part_nr;
static disk_partition_t cur_part_info;
#define DOS_BOOT_MAGIC_OFFSET 0x1fe
cur_part_info.start + block, nr_blocks, buf);
}
-int fat_register_device(block_dev_desc_t * dev_desc, int part_no)
+int fat_set_blk_dev(block_dev_desc_t *dev_desc, disk_partition_t *info)
{
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, dev_desc->blksz);
- /* First close any currently found FAT filesystem */
- cur_dev = NULL;
-
-#if (defined(CONFIG_CMD_IDE) || \
- defined(CONFIG_CMD_SATA) || \
- defined(CONFIG_CMD_SCSI) || \
- defined(CONFIG_CMD_USB) || \
- defined(CONFIG_MMC) || \
- defined(CONFIG_SYSTEMACE) )
-
- /* Read the partition table, if present */
- if (!get_partition_info(dev_desc, part_no, &cur_part_info)) {
- cur_dev = dev_desc;
- cur_part_nr = part_no;
- }
-#endif
-
- /* Otherwise it might be a superfloppy (whole-disk FAT filesystem) */
- if (!cur_dev) {
- if (part_no != 0) {
- printf("** Partition %d not valid on device %d **\n",
- part_no, dev_desc->dev);
- return -1;
- }
-
- cur_dev = dev_desc;
- cur_part_nr = 1;
- cur_part_info.start = 0;
- cur_part_info.size = dev_desc->lba;
- cur_part_info.blksz = dev_desc->blksz;
- memset(cur_part_info.name, 0, sizeof(cur_part_info.name));
- memset(cur_part_info.type, 0, sizeof(cur_part_info.type));
- }
+ cur_dev = dev_desc;
+ cur_part_info = *info;
/* Make sure it has a valid FAT header */
if (disk_read(0, 1, buffer) != 1) {
return -1;
}
+int fat_register_device(block_dev_desc_t *dev_desc, int part_no)
+{
+ disk_partition_t info;
+
+ /* First close any currently found FAT filesystem */
+ cur_dev = NULL;
+
+ /* Read the partition table, if present */
+ if (get_partition_info(dev_desc, part_no, &info)) {
+ if (part_no != 0) {
+ printf("** Partition %d not valid on device %d **\n",
+ part_no, dev_desc->dev);
+ return -1;
+ }
+
+ info.start = 0;
+ info.size = dev_desc->lba;
+ info.blksz = dev_desc->blksz;
+ info.name[0] = 0;
+ info.type[0] = 0;
+ info.bootable = 0;
+#ifdef CONFIG_PARTITION_UUIDS
+ info.uuid[0] = 0;
+#endif
+ }
+
+ return fat_set_blk_dev(dev_desc, &info);
+}
/*
* Get the first occurence of a directory delimiter ('/' or '\') in a string.
}
/* Calculate short name checksum */
-static __u8 mkcksum(const char *str)
+static __u8 mkcksum(const char name[8], const char ext[3])
{
int i;
__u8 ret = 0;
- for (i = 0; i < 11; i++) {
- ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + str[i];
- }
+ for (i = 0; i < sizeof(name); i++)
+ ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + name[i];
+ for (i = 0; i < sizeof(ext); i++)
+ ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + ext[i];
return ret;
}
return NULL;
}
#ifdef CONFIG_SUPPORT_VFAT
- if (dols && mkcksum(dentptr->name) == prevcksum) {
+ __u8 csum = mkcksum(dentptr->name, dentptr->ext);
+ if (dols && csum == prevcksum) {
prevcksum = 0xffff;
dentptr++;
continue;
for (i = 0; i < DIRENTSPERBLOCK; i++) {
char s_name[14], l_name[VFAT_MAXLEN_BYTES];
+ __u8 csum;
l_name[0] = '\0';
if (dentptr->name[0] == DELETED_FLAG) {
dentptr++;
continue;
}
- if ((dentptr->attr & ATTR_VOLUME)) {
+
+ csum = mkcksum(dentptr->name, dentptr->ext);
+ if (dentptr->attr & ATTR_VOLUME) {
#ifdef CONFIG_SUPPORT_VFAT
if ((dentptr->attr & ATTR_VFAT) == ATTR_VFAT &&
(dentptr->name[0] & LAST_LONG_ENTRY_MASK)) {
goto exit;
}
#ifdef CONFIG_SUPPORT_VFAT
- else if (dols == LS_ROOT &&
- mkcksum(dentptr->name) == prevcksum) {
+ else if (dols == LS_ROOT && csum == prevcksum) {
prevcksum = 0xffff;
dentptr++;
continue;
vol_label[11] = '\0';
volinfo.fs_type[5] = '\0';
- printf("Partition %d: Filesystem: %s \"%s\"\n", cur_part_nr,
- volinfo.fs_type, vol_label);
+ printf("Filesystem: %s \"%s\"\n", volinfo.fs_type, vol_label);
return 0;
}
/* Get short file name and checksum value */
strncpy(s_name, (*dentptr)->name, 16);
- checksum = mkcksum(s_name);
+ checksum = mkcksum((*dentptr)->name, (*dentptr)->ext);
do {
memset(slotptr, 0x00, sizeof(dir_slot));
--- /dev/null
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <part.h>
+#include <ext4fs.h>
+#include <fat.h>
+#include <fs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static block_dev_desc_t *fs_dev_desc;
+static disk_partition_t fs_partition;
+static int fs_type = FS_TYPE_ANY;
+
+static inline int fs_ls_unsupported(const char *dirname)
+{
+ printf("** Unrecognized filesystem type **\n");
+ return -1;
+}
+
+static inline int fs_read_unsupported(const char *filename, ulong addr,
+ int offset, int len)
+{
+ printf("** Unrecognized filesystem type **\n");
+ return -1;
+}
+
+#ifdef CONFIG_FS_FAT
+static int fs_probe_fat(void)
+{
+ return fat_set_blk_dev(fs_dev_desc, &fs_partition);
+}
+
+static void fs_close_fat(void)
+{
+}
+
+#define fs_ls_fat file_fat_ls
+
+static int fs_read_fat(const char *filename, ulong addr, int offset, int len)
+{
+ int len_read;
+
+ len_read = file_fat_read_at(filename, offset,
+ (unsigned char *)addr, len);
+ if (len_read == -1) {
+ printf("** Unable to read file %s **\n", filename);
+ return -1;
+ }
+
+ return len_read;
+}
+#else
+static inline int fs_probe_fat(void)
+{
+ return -1;
+}
+
+static inline void fs_close_fat(void)
+{
+}
+
+#define fs_ls_fat fs_ls_unsupported
+#define fs_read_fat fs_read_unsupported
+#endif
+
+#ifdef CONFIG_FS_EXT4
+static int fs_probe_ext(void)
+{
+ ext4fs_set_blk_dev(fs_dev_desc, &fs_partition);
+
+ if (!ext4fs_mount(fs_partition.size)) {
+ ext4fs_close();
+ return -1;
+ }
+
+ return 0;
+}
+
+static void fs_close_ext(void)
+{
+ ext4fs_close();
+}
+
+#define fs_ls_ext ext4fs_ls
+
+static int fs_read_ext(const char *filename, ulong addr, int offset, int len)
+{
+ int file_len;
+ int len_read;
+
+ if (offset != 0) {
+ printf("** Cannot support non-zero offset **\n");
+ return -1;
+ }
+
+ file_len = ext4fs_open(filename);
+ if (file_len < 0) {
+ printf("** File not found %s **\n", filename);
+ ext4fs_close();
+ return -1;
+ }
+
+ if (len == 0)
+ len = file_len;
+
+ len_read = ext4fs_read((char *)addr, len);
+ ext4fs_close();
+
+ if (len_read != len) {
+ printf("** Unable to read file %s **\n", filename);
+ return -1;
+ }
+
+ return len_read;
+}
+#else
+static inline int fs_probe_ext(void)
+{
+ return -1;
+}
+
+static inline void fs_close_ext(void)
+{
+}
+
+#define fs_ls_ext fs_ls_unsupported
+#define fs_read_ext fs_read_unsupported
+#endif
+
+static struct {
+ int fstype;
+ int (*probe)(void);
+} fstypes[] = {
+ {
+ .fstype = FS_TYPE_FAT,
+ .probe = fs_probe_fat,
+ },
+ {
+ .fstype = FS_TYPE_EXT,
+ .probe = fs_probe_ext,
+ },
+};
+
+int fs_set_blk_dev(const char *ifname, const char *dev_part_str, int fstype)
+{
+ int part, i;
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ static int relocated;
+
+ if (!relocated) {
+ for (i = 0; i < ARRAY_SIZE(fstypes); i++)
+ fstypes[i].probe += gd->reloc_off;
+ relocated = 1;
+ }
+#endif
+
+ part = get_device_and_partition(ifname, dev_part_str, &fs_dev_desc,
+ &fs_partition, 1);
+ if (part < 0)
+ return -1;
+
+ for (i = 0; i < ARRAY_SIZE(fstypes); i++) {
+ if ((fstype != FS_TYPE_ANY) && (fstype != fstypes[i].fstype))
+ continue;
+
+ if (!fstypes[i].probe()) {
+ fs_type = fstypes[i].fstype;
+ return 0;
+ }
+ }
+
+ printf("** Unrecognized filesystem type **\n");
+ return -1;
+}
+
+static void fs_close(void)
+{
+ switch (fs_type) {
+ case FS_TYPE_FAT:
+ fs_close_fat();
+ break;
+ case FS_TYPE_EXT:
+ fs_close_ext();
+ break;
+ default:
+ break;
+ }
+
+ fs_type = FS_TYPE_ANY;
+}
+
+int fs_ls(const char *dirname)
+{
+ int ret;
+
+ switch (fs_type) {
+ case FS_TYPE_FAT:
+ ret = fs_ls_fat(dirname);
+ break;
+ case FS_TYPE_EXT:
+ ret = fs_ls_ext(dirname);
+ break;
+ default:
+ ret = fs_ls_unsupported(dirname);
+ break;
+ }
+
+ fs_close();
+
+ return ret;
+}
+
+int fs_read(const char *filename, ulong addr, int offset, int len)
+{
+ int ret;
+
+ switch (fs_type) {
+ case FS_TYPE_FAT:
+ ret = fs_read_fat(filename, addr, offset, len);
+ break;
+ case FS_TYPE_EXT:
+ ret = fs_read_ext(filename, addr, offset, len);
+ break;
+ default:
+ ret = fs_read_unsupported(filename, addr, offset, len);
+ break;
+ }
+
+ fs_close();
+
+ return ret;
+}
+
+int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
+ int fstype, int cmdline_base)
+{
+ unsigned long addr;
+ const char *addr_str;
+ const char *filename;
+ unsigned long bytes;
+ unsigned long pos;
+ int len_read;
+ char buf[12];
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+ if (argc > 7)
+ return CMD_RET_USAGE;
+
+ if (fs_set_blk_dev(argv[1], (argc >= 3) ? argv[2] : NULL, fstype))
+ return 1;
+
+ if (argc >= 4) {
+ addr = simple_strtoul(argv[3], NULL, cmdline_base);
+ } else {
+ addr_str = getenv("loadaddr");
+ if (addr_str != NULL)
+ addr = simple_strtoul(addr_str, NULL, 16);
+ else
+ addr = CONFIG_SYS_LOAD_ADDR;
+ }
+ if (argc >= 5) {
+ filename = argv[4];
+ } else {
+ filename = getenv("bootfile");
+ if (!filename) {
+ puts("** No boot file defined **\n");
+ return 1;
+ }
+ }
+ if (argc >= 6)
+ bytes = simple_strtoul(argv[5], NULL, cmdline_base);
+ else
+ bytes = 0;
+ if (argc >= 7)
+ pos = simple_strtoul(argv[6], NULL, cmdline_base);
+ else
+ pos = 0;
+
+ len_read = fs_read(filename, addr, pos, bytes);
+ if (len_read <= 0)
+ return 1;
+
+ printf("%d bytes read\n", len_read);
+
+ sprintf(buf, "0x%x", len_read);
+ setenv("filesize", buf);
+
+ return 0;
+}
+
+int do_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
+ int fstype)
+{
+ if (argc < 2)
+ return CMD_RET_USAGE;
+ if (argc > 4)
+ return CMD_RET_USAGE;
+
+ if (fs_set_blk_dev(argv[1], (argc >= 3) ? argv[2] : NULL, fstype))
+ return 1;
+
+ if (fs_ls(argc >= 4 ? argv[3] : "/"))
+ return 1;
+
+ return 0;
+}
#ifdef NO_inline
#define inline
-#else
-#define inline __inline__
#endif
#define cond_resched() do {} while (0)
return err;
}
-static int
-zfs_label(device_t device, char **label)
-{
- char *nvlist;
- int err;
- struct zfs_data *data;
-
- data = zfs_mount(device);
- if (!data)
- return ZFS_ERR_BAD_FS;
-
- err = int_zfs_fetch_nvlist(data, &nvlist);
- if (err) {
- zfs_unmount(data);
- return err;
- }
-
- *label = zfs_nvlist_lookup_string(nvlist, ZPOOL_CONFIG_POOL_NAME);
- free(nvlist);
- zfs_unmount(data);
- return ZFS_ERR_NONE;
-}
-
-static int
-zfs_uuid(device_t device, char **uuid)
-{
- struct zfs_data *data;
-
- data = zfs_mount(device);
- if (!data)
- return ZFS_ERR_BAD_FS;
-
- *uuid = malloc(17); /* %016llx + nil */
- if (!*uuid)
- return ZFS_ERR_OUT_OF_MEMORY;
-
- /* *uuid = xasprintf ("%016llx", (long long unsigned) data->pool_guid);*/
- snprintf(*uuid, 17, "%016llx", (long long unsigned) data->pool_guid);
- zfs_unmount(data);
-
- return ZFS_ERR_NONE;
-}
-
/*
* zfs_open() locates a file in the rootpool by following the
* MOS and places the dnode of the file in the memory address DNODE.
struct zfs_data *data;
int err;
int isfs;
-#if 0
- char *label = NULL;
-
- zfs_label(device, &label);
- if (label)
- printf("ZPOOL label '%s'\n",
- label);
-#endif
data = zfs_mount(device);
if (!data)
--- /dev/null
+#
+# Copyright (C) 2012 Marek Vasut <marex@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+#########################################################################
+
+##
+# make_u_boot_list - Generate contents of u_boot_list section
+# 1: The name of the resulting file (usually u-boot.lst)
+# 2: Files to analyze for possible u_boot_list entries
+#
+# This function generates the contents of the u_boot_list section,
+# including all the border symbols for it's subsections. The operation
+# of this function is as follows, numbering goes per lines:
+#
+# 1) Dump the ELF header sections from all files supplied via $(2)
+# 2) Filter out all other stuff that does not belong into .u_boot_list
+# section.
+# 3) Fix up the lines so that the resulting output is is in format
+# ".u_boot_list.*".
+# 4) Remove the last .something$, since that only contains the name
+# of the variable to be put into a subsection. This name is irelevant
+# for generation of border symbols, thus of no interest, remove it.
+# 5) Take each line and for every dot "." in that line, print the whole
+# line until that dot "." . This is important so that we have all
+# parent border symbols generated as well.
+# 6) Load every line and firstly append "\a" at the end and print the
+# line. Next, append "@" at the end and print the line. Finally,
+# append "~" at the end of line. This will make sense in conjunction
+# with 6) and 7).
+# 7) Sort the lines. It is imperative to use LC_COLLATE=C here because
+# with this, the "\a" symbol is first and "~" symbol is last. Any
+# other symbols fall inbetween. Symbols like "@", which marks the
+# end of current line (representing current section) and ".", which
+# means the line continues and thus represents subsection.
+# 8) With such ordering, all lines ending with "\a" will float at the
+# begining of all lines with the same prefix. Thus it is easy to
+# replace "\a" with __start and make it the __start border symbol.
+# Very similarly for "~", which will be always at the bottom and so
+# can be replaced by "__end" and made into the __end border symbol.
+# Finally, every line ending with "@" symbol will be transformed
+# into " *(SORT(${line}*)); " format, which in the linker parlance
+# will allow it to trap all symbols relevant to the subsection.
+#
+define make_u_boot_list
+$(1): $(2)
+ $(OBJDUMP) -h $(2) | \
+ sed -n -e '/.*\.u_boot_list[^ ]\+/ ! {d;n}' \
+ -e 's/.*\(\.u_boot_list[^ ]\+\).*$$$$/\1/' \
+ -e 's/\.[^\.]\+$$$$//' \
+ -e ':s /^.\+$$$$/ { p;s/^\(.*\)\.[^\.]*$$$$/\1/;b s }' | \
+ sed -n -e 'h;s/$$$$/\a/p;g;s/$$$$/@/p;g;s/$$$$/~/p;' | \
+ LC_COLLATE=C sort -u | \
+ sed -n -e '/\a$$$$/ { s/\./_/g;s/\a$$$$/__start = .;/p; }'\
+ -e '/~$$$$/ { s/\./_/g;s/~$$$$/__end = .;/p; }'\
+ -e '/@$$$$/ { s/\(.*\)@$$$$/*(SORT(\1.*));/p }' > $(1)
+endef
#define HOST_IRQ_STAT 0x08 /* interrupt status */
#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */
#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */
+#define HOST_CAP2 0x24 /* host capabilities, extended */
/* HOST_CTL bits */
#define HOST_RESET (1 << 0) /* reset controller; self-clear */
#define ATA_CMD_WRITE_EXT 0x34 /* Write Sectores (with retries) with 48bit addressing */
#define ATA_CMD_VRFY_EXT 0x42 /* Read Verify (with retries) with 48bit addressing */
+#define ATA_CMD_FLUSH 0xE7 /* Flush drive cache */
+#define ATA_CMD_FLUSH_EXT 0xEA /* Flush drive cache, with 48bit addressing */
+
/*
* ATAPI Commands
*/
u32 sdcr; /* 0x0c */
u32 argr; /* 0x10 */
u32 cmdr; /* 0x14 */
- u32 _18; /* 0x18 */
+ u32 blkr; /* 0x18 */
u32 _1c; /* 0x1c */
u32 rspr; /* 0x20 */
u32 rspr1; /* 0x24 */
#define MMCI_TRTYP_OFFSET 19
#define MMCI_TRTYP_SIZE 2
+/* Bitfields in BLKR */
+/* MMCI_BLKLEN_OFFSET/SIZE already defined in MR */
+#define MMCI_BCNT_OFFSET 0
+#define MMCI_BCNT_SIZE 16
+
/* Bitfields in RSPRx */
#define MMCI_RSP_OFFSET 0
#define MMCI_RSP_SIZE 32
--- /dev/null
+/*
+ * Generic bounce buffer implementation
+ *
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __INCLUDE_BOUNCEBUF_H__
+#define __INCLUDE_BOUNCEBUF_H__
+
+/*
+ * GEN_BB_READ -- Data are read from the buffer eg. by DMA hardware.
+ * The source buffer is copied into the bounce buffer (if unaligned, otherwise
+ * the source buffer is used directly) upon start() call, then the operation
+ * requiring the aligned transfer happens, then the bounce buffer is lost upon
+ * stop() call.
+ */
+#define GEN_BB_READ (1 << 0)
+/*
+ * GEN_BB_WRITE -- Data are written into the buffer eg. by DMA hardware.
+ * The source buffer starts in an undefined state upon start() call, then the
+ * operation requiring the aligned transfer happens, then the bounce buffer is
+ * copied into the destination buffer (if unaligned, otherwise destination
+ * buffer is used directly) upon stop() call.
+ */
+#define GEN_BB_WRITE (1 << 1)
+/*
+ * GEN_BB_RW -- Data are read and written into the buffer eg. by DMA hardware.
+ * The source buffer is copied into the bounce buffer (if unaligned, otherwise
+ * the source buffer is used directly) upon start() call, then the operation
+ * requiring the aligned transfer happens, then the bounce buffer is copied
+ * into the destination buffer (if unaligned, otherwise destination buffer is
+ * used directly) upon stop() call.
+ */
+#define GEN_BB_RW (GEN_BB_READ | GEN_BB_WRITE)
+
+#ifdef CONFIG_BOUNCE_BUFFER
+/**
+ * bounce_buffer_start() -- Start the bounce buffer session
+ * data: pointer to buffer to be aligned
+ * len: length of the buffer
+ * backup: pointer to backup buffer (the original value is stored here if
+ * needed
+ * flags: flags describing the transaction, see above.
+ */
+int bounce_buffer_start(void **data, size_t len, void **backup, uint8_t flags);
+/**
+ * bounce_buffer_stop() -- Finish the bounce buffer session
+ * data: pointer to buffer that was aligned
+ * len: length of the buffer
+ * backup: pointer to backup buffer (the original value is stored here if
+ * needed
+ * flags: flags describing the transaction, see above.
+ */
+int bounce_buffer_stop(void **data, size_t len, void **backup, uint8_t flags);
+#else
+static inline int bounce_buffer_start(void **data, size_t len, void **backup,
+ uint8_t flags)
+{
+ return 0;
+}
+
+static inline int bounce_buffer_stop(void **data, size_t len, void **backup,
+ uint8_t flags)
+{
+ return 0;
+}
+#endif
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CBFS_H
+#define __CBFS_H
+
+#include <compiler.h>
+#include <linux/compiler.h>
+
+enum cbfs_result {
+ CBFS_SUCCESS = 0,
+ CBFS_NOT_INITIALIZED,
+ CBFS_BAD_HEADER,
+ CBFS_BAD_FILE,
+ CBFS_FILE_NOT_FOUND
+};
+
+enum cbfs_filetype {
+ CBFS_TYPE_STAGE = 0x10,
+ CBFS_TYPE_PAYLOAD = 0x20,
+ CBFS_TYPE_OPTIONROM = 0x30,
+ CBFS_TYPE_BOOTSPLASH = 0x40,
+ CBFS_TYPE_RAW = 0x50,
+ CBFS_TYPE_VSA = 0x51,
+ CBFS_TYPE_MBI = 0x52,
+ CBFS_TYPE_MICROCODE = 0x53,
+ CBFS_COMPONENT_CMOS_DEFAULT = 0xaa,
+ CBFS_COMPONENT_CMOS_LAYOUT = 0x01aa
+};
+
+struct cbfs_header {
+ u32 magic;
+ u32 version;
+ u32 rom_size;
+ u32 boot_block_size;
+ u32 align;
+ u32 offset;
+ u32 pad[2];
+} __packed;
+
+struct cbfs_fileheader {
+ u8 magic[8];
+ u32 len;
+ u32 type;
+ u32 checksum;
+ u32 offset;
+} __packed;
+
+struct cbfs_cachenode {
+ struct cbfs_cachenode *next;
+ u32 type;
+ void *data;
+ u32 data_length;
+ char *name;
+ u32 name_length;
+ u32 checksum;
+} __packed;
+
+extern enum cbfs_result file_cbfs_result;
+
+/*
+ * Return a string describing the most recent error condition.
+ *
+ * @return A pointer to the constant string.
+ */
+const char *file_cbfs_error(void);
+
+/*
+ * Initialize the CBFS driver and load metadata into RAM.
+ *
+ * @param end_of_rom Points to the end of the ROM the CBFS should be read
+ * from.
+ */
+void file_cbfs_init(uintptr_t end_of_rom);
+
+/*
+ * Get the header structure for the current CBFS.
+ *
+ * @return A pointer to the constant structure, or NULL if there is none.
+ */
+const struct cbfs_header *file_cbfs_get_header(void);
+
+/*
+ * Get a handle for the first file in CBFS.
+ *
+ * @return A handle for the first file in CBFS, NULL on error.
+ */
+const struct cbfs_cachenode *file_cbfs_get_first(void);
+
+/*
+ * Get a handle to the file after this one in CBFS.
+ *
+ * @param file A pointer to the handle to advance.
+ */
+void file_cbfs_get_next(const struct cbfs_cachenode **file);
+
+/*
+ * Find a file with a particular name in CBFS.
+ *
+ * @param name The name to search for.
+ *
+ * @return A handle to the file, or NULL on error.
+ */
+const struct cbfs_cachenode *file_cbfs_find(const char *name);
+
+
+/***************************************************************************/
+/* All of the functions below can be used without first initializing CBFS. */
+/***************************************************************************/
+
+/*
+ * Find a file with a particular name in CBFS without using the heap.
+ *
+ * @param end_of_rom Points to the end of the ROM the CBFS should be read
+ * from.
+ * @param name The name to search for.
+ *
+ * @return A handle to the file, or NULL on error.
+ */
+const struct cbfs_cachenode *file_cbfs_find_uncached(uintptr_t end_of_rom,
+ const char *name);
+
+/*
+ * Get the name of a file in CBFS.
+ *
+ * @param file The handle to the file.
+ *
+ * @return The name of the file, NULL on error.
+ */
+const char *file_cbfs_name(const struct cbfs_cachenode *file);
+
+/*
+ * Get the size of a file in CBFS.
+ *
+ * @param file The handle to the file.
+ *
+ * @return The size of the file, zero on error.
+ */
+u32 file_cbfs_size(const struct cbfs_cachenode *file);
+
+/*
+ * Get the type of a file in CBFS.
+ *
+ * @param file The handle to the file.
+ *
+ * @return The type of the file, zero on error.
+ */
+u32 file_cbfs_type(const struct cbfs_cachenode *file);
+
+/*
+ * Read a file from CBFS into RAM
+ *
+ * @param file A handle to the file to read.
+ * @param buffer Where to read it into memory.
+ *
+ * @return If positive or zero, the number of characters read. If negative, an
+ * error occurred.
+ */
+long file_cbfs_read(const struct cbfs_cachenode *file, void *buffer,
+ unsigned long maxsize);
+
+#endif /* __CBFS_H */
+++ /dev/null
-/*
- * linux/include/asm-arm/hardware/clps7111.h
- *
- * This file contains the hardware definitions of the CLPS7111 internal
- * registers.
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_HARDWARE_CLPS7111_H
-#define __ASM_HARDWARE_CLPS7111_H
-
-#define CLPS7111_PHYS_BASE (0x80000000)
-
-#ifndef __ASSEMBLY__
-#define clps_readb(off) __raw_readb(CLPS7111_BASE + (off))
-#define clps_readl(off) __raw_readl(CLPS7111_BASE + (off))
-#define clps_writeb(val,off) __raw_writeb(val, CLPS7111_BASE + (off))
-#define clps_writel(val,off) __raw_writel(val, CLPS7111_BASE + (off))
-#endif
-
-#define PADR (0x0000)
-#define PBDR (0x0001)
-#define PDDR (0x0003)
-#define PADDR (0x0040)
-#define PBDDR (0x0041)
-#define PDDDR (0x0043)
-#define PEDR (0x0080)
-#define PEDDR (0x00c0)
-#define SYSCON1 (0x0100)
-#define SYSFLG1 (0x0140)
-#define MEMCFG1 (0x0180)
-#define MEMCFG2 (0x01c0)
-#define DRFPR (0x0200)
-#define INTSR1 (0x0240)
-#define INTMR1 (0x0280)
-#define LCDCON (0x02c0)
-#define TC1D (0x0300)
-#define TC2D (0x0340)
-#define RTCDR (0x0380)
-#define RTCMR (0x03c0)
-#define PMPCON (0x0400)
-#define CODR (0x0440)
-#define UARTDR1 (0x0480)
-#define UBRLCR1 (0x04c0)
-#define SYNCIO (0x0500)
-#define PALLSW (0x0540)
-#define PALMSW (0x0580)
-#define STFCLR (0x05c0)
-#define BLEOI (0x0600)
-#define MCEOI (0x0640)
-#define TEOI (0x0680)
-#define TC1EOI (0x06c0)
-#define TC2EOI (0x0700)
-#define RTCEOI (0x0740)
-#define UMSEOI (0x0780)
-#define COEOI (0x07c0)
-#define HALT (0x0800)
-#define STDBY (0x0840)
-
-#define FBADDR (0x1000)
-#define SYSCON2 (0x1100)
-#define SYSFLG2 (0x1140)
-#define INTSR2 (0x1240)
-#define INTMR2 (0x1280)
-#define UARTDR2 (0x1480)
-#define UBRLCR2 (0x14c0)
-#define SS2DR (0x1500)
-#define SRXEOF (0x1600)
-#define SS2POP (0x16c0)
-#define KBDEOI (0x1700)
-
-/* common bits: SYSCON1 / SYSCON2 */
-#define SYSCON_UARTEN (1 << 8)
-
-#define SYSCON1_KBDSCAN(x) ((x) & 15)
-#define SYSCON1_KBDSCANMASK (15)
-#define SYSCON1_TC1M (1 << 4)
-#define SYSCON1_TC1S (1 << 5)
-#define SYSCON1_TC2M (1 << 6)
-#define SYSCON1_TC2S (1 << 7)
-#define SYSCON1_UART1EN SYSCON_UARTEN
-#define SYSCON1_BZTOG (1 << 9)
-#define SYSCON1_BZMOD (1 << 10)
-#define SYSCON1_DBGEN (1 << 11)
-#define SYSCON1_LCDEN (1 << 12)
-#define SYSCON1_CDENTX (1 << 13)
-#define SYSCON1_CDENRX (1 << 14)
-#define SYSCON1_SIREN (1 << 15)
-#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16)
-#define SYSCON1_ADCKSEL_MASK (3 << 16)
-#define SYSCON1_EXCKEN (1 << 18)
-#define SYSCON1_WAKEDIS (1 << 19)
-#define SYSCON1_IRTXM (1 << 20)
-
-/* common bits: SYSFLG1 / SYSFLG2 */
-#define SYSFLG_UBUSY (1 << 11)
-#define SYSFLG_URXFE (1 << 22)
-#define SYSFLG_UTXFF (1 << 23)
-
-#define SYSFLG1_MCDR (1 << 0)
-#define SYSFLG1_DCDET (1 << 1)
-#define SYSFLG1_WUDR (1 << 2)
-#define SYSFLG1_WUON (1 << 3)
-#define SYSFLG1_CTS (1 << 8)
-#define SYSFLG1_DSR (1 << 9)
-#define SYSFLG1_DCD (1 << 10)
-#define SYSFLG1_UBUSY SYSFLG_UBUSY
-#define SYSFLG1_NBFLG (1 << 12)
-#define SYSFLG1_RSTFLG (1 << 13)
-#define SYSFLG1_PFFLG (1 << 14)
-#define SYSFLG1_CLDFLG (1 << 15)
-#define SYSFLG1_URXFE SYSFLG_URXFE
-#define SYSFLG1_UTXFF SYSFLG_UTXFF
-#define SYSFLG1_CRXFE (1 << 24)
-#define SYSFLG1_CTXFF (1 << 25)
-#define SYSFLG1_SSIBUSY (1 << 26)
-#define SYSFLG1_ID (1 << 29)
-
-#define SYSFLG2_SSRXOF (1 << 0)
-#define SYSFLG2_RESVAL (1 << 1)
-#define SYSFLG2_RESFRM (1 << 2)
-#define SYSFLG2_SS2RXFE (1 << 3)
-#define SYSFLG2_SS2TXFF (1 << 4)
-#define SYSFLG2_SS2TXUF (1 << 5)
-#define SYSFLG2_CKMODE (1 << 6)
-#define SYSFLG2_UBUSY SYSFLG_UBUSY
-#define SYSFLG2_URXFE SYSFLG_URXFE
-#define SYSFLG2_UTXFF SYSFLG_UTXFF
-
-#define LCDCON_GSEN (1 << 30)
-#define LCDCON_GSMD (1 << 31)
-
-#define SYSCON2_SERSEL (1 << 0)
-#define SYSCON2_KBD6 (1 << 1)
-#define SYSCON2_DRAMZ (1 << 2)
-#define SYSCON2_KBWEN (1 << 3)
-#define SYSCON2_SS2TXEN (1 << 4)
-#define SYSCON2_PCCARD1 (1 << 5)
-#define SYSCON2_PCCARD2 (1 << 6)
-#define SYSCON2_SS2RXEN (1 << 7)
-#define SYSCON2_UART2EN SYSCON_UARTEN
-#define SYSCON2_SS2MAEN (1 << 9)
-#define SYSCON2_OSTB (1 << 12)
-#define SYSCON2_CLKENSL (1 << 13)
-#define SYSCON2_BUZFREQ (1 << 14)
-
-/* common bits: UARTDR1 / UARTDR2 */
-#define UARTDR_FRMERR (1 << 8)
-#define UARTDR_PARERR (1 << 9)
-#define UARTDR_OVERR (1 << 10)
-
-/* common bits: UBRLCR1 / UBRLCR2 */
-#define UBRLCR_BAUD_MASK ((1 << 12) - 1)
-#define UBRLCR_BREAK (1 << 12)
-#define UBRLCR_PRTEN (1 << 13)
-#define UBRLCR_EVENPRT (1 << 14)
-#define UBRLCR_XSTOP (1 << 15)
-#define UBRLCR_FIFOEN (1 << 16)
-#define UBRLCR_WRDLEN5 (0 << 17)
-#define UBRLCR_WRDLEN6 (1 << 17)
-#define UBRLCR_WRDLEN7 (2 << 17)
-#define UBRLCR_WRDLEN8 (3 << 17)
-#define UBRLCR_WRDLEN_MASK (3 << 17)
-
-#define SYNCIO_SMCKEN (1 << 13)
-#define SYNCIO_TXFRMEN (1 << 14)
-
-#define SYSCON3 0x2200 /* System Control register 3 ----------------------- */
-#define ADCCON 0x00000001 /* ADC configuration */
-#define CLKCTL 0x00000006 /* processor clock control */
-#define CLKCTL_18 0x0 /* 18.432 MHz */
-#define CLKCTL_36 0x2 /* 36.864 MHz */
-#define CLKCTL_49 0x4 /* 49.152 MHz */
-#define CLKCTL_73 0x6 /* 73.728 MHz */
-#define MCPSEL 0x00000008 /* MCP select */
-#define ADCCKNSEN 0x000010 /* ADC clock sense */
-#define VERSN 0x000000e0 /* additional version bits */
-#define VERSN_SHIFT 5
-#define FASTWAKE 0x0000100 /* Wakeup clock select: 0=8Hz, 1=4kHz */
-
-#define INTSR3 0x2240 /* Interrupt Status register 3 --------------------- */
-#define MCPINT 0x00000001 /* MCP interface interrupt (FIQ) */
-
-#define INTMR3 0x2280 /* Interrupt Mask register 3 ----------------------- */
-#define LEDFLSH 0x22C0 /* LED Flash control register ---------------------- */
-#define LEDFLSH_RATE 0x03 /* flash rate */
-#define LEDFLSH_RATE_SHIFT 0
-#define LEDFLSH_DUTY 0x3c /* duty ratio */
-#define LEDFLSH_DUTY_SHIFT 2
-#define LEDFLSH_ENABLE 0x40 /* enable */
-
-#define IO_START CLPS7111_PHYS_BASE
-
-#define IO(offset) (IO_START + (offset))
-
-#define IO_BYTE(offset) (*(volatile unsigned char *)(IO_START + (offset)))
-#define IO_WORD(offset) (*(volatile unsigned long *)(IO_START + (offset)))
-
-#define IO_PADR IO_BYTE(PADR)
-#define IO_PBDR IO_BYTE(PBDR)
-#define IO_PDDR IO_BYTE(PDDR)
-#define IO_PADDR IO_BYTE(PADDR)
-#define IO_PBDDR IO_BYTE(PBDDR)
-#define IO_PDDDR IO_BYTE(PDDDR)
-#define IO_PEDR IO_BYTE(PEDR)
-#define IO_PEDDR IO_BYTE(PEDDR)
-#define IO_SYSCON IO_WORD(SYSCON)
-#define IO_SYSFLG IO_WORD(SYSFLG)
-#define IO_MEMCFG1 IO_WORD(MEMCFG1)
-#define IO_MEMCFG2 IO_WORD(MEMCFG2)
-#define IO_DRFPR IO_WORD(DRFPR)
-#define IO_INTSR IO_WORD(INTSR)
-#define IO_INTMR IO_WORD(INTMR)
-#define IO_LCDCON IO_WORD(LCDCON)
-#define IO_TC1D IO_WORD(TC1D)
-#define IO_TC2D IO_WORD(TC2D)
-#define IO_RTCDR IO_WORD(RTCDR)
-#define IO_RTCMR IO_WORD(RTCMR)
-#define IO_PMPCON IO_WORD(PMPCON)
-#define IO_CODR IO_BYTE(CODR)
-#define IO_UARTDR IO_WORD(UARTDR)
-#define IO_UBRLCR IO_WORD(UBRLCR)
-#define IO_SYNCIO IO_WORD(SYNCIO)
-#define IO_PALLSW IO_WORD(PALLSW)
-#define IO_PALMSW IO_WORD(PALMSW)
-#define IO_STFCLR IO_WORD(STFCLR)
-#define IO_BLEOI IO_WORD(BLEOI)
-#define IO_MCEOI IO_WORD(MCEOI)
-#define IO_TEOI IO_WORD(TEOI)
-#define IO_TC1EOI IO_WORD(TC1EOI)
-#define IO_TC2EOI IO_WORD(TC2EOI)
-#define IO_RTCEOI IO_WORD(RTCEOI)
-#define IO_UMSEOI IO_WORD(UMSEOI)
-#define IO_COEOI IO_WORD(COEOI)
-#define IO_HALT IO_WORD(HALT)
-#define IO_STDBY IO_WORD(STDBY)
-#define IO_SYSCON1 IO_WORD(SYSCON1)
-#define IO_SYSFLG1 IO_WORD(SYSFLG1)
-#define IO_INTSR1 IO_WORD(INTSR1)
-#define IO_INTMR1 IO_WORD(INTMR1)
-#define IO_UARTDR1 IO_WORD(UARTDR1)
-#define IO_UBRLCR1 IO_WORD(UBRLCR1)
-#define IO_FRBADDR IO_WORD(FRBADDR)
-#define IO_SYSCON2 IO_WORD(SYSCON2)
-#define IO_SYSFLG2 IO_WORD(SYSFLG2)
-#define IO_INTSR2 IO_WORD(INTSR2)
-#define IO_INTMR2 IO_WORD(INTMR2)
-#define IO_UARTDR2 IO_WORD(UARTDR2)
-#define IO_UBRLCR2 IO_WORD(UBRLCR2)
-#define IO_KBDEOI IO_WORD(KBDEOI)
-
-#define IO_MCCR IO_WORD(MCCR)
-#define IO_MCDR0 IO_WORD(MCDR0)
-#define IO_MCDR1 IO_WORD(MCDR1)
-#define IO_MCDR2 IO_WORD(MCDR2)
-#define IO_MCSR IO_WORD(MCSR)
-#define IO_SYSCON3 IO_WORD(SYSCON3)
-#define IO_INTSR3 IO_WORD(INTSR3)
-#define IO_INTMR3 IO_WORD(INTMR3)
-#define IO_LEDFLSH IO_WORD(LEDFLSH)
-
-#endif /* __ASM_HARDWARE_CLPS7111_H */
#define __COMMAND_H
#include <config.h>
+#include <linker_lists.h>
#ifndef NULL
#define NULL 0
typedef struct cmd_tbl_s cmd_tbl_t;
-extern cmd_tbl_t __u_boot_cmd_start;
-extern cmd_tbl_t __u_boot_cmd_end;
#if defined(CONFIG_CMD_RUN)
extern int do_run(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
#define CMD_FLAG_REPEAT 0x0001 /* repeat last command */
#define CMD_FLAG_BOOTD 0x0002 /* command is from bootd */
-#define Struct_Section __attribute__((unused, section(".u_boot_cmd"), \
- aligned(4)))
-
#ifdef CONFIG_AUTO_COMPLETE
# define _CMD_COMPLETE(x) x,
#else
# define _CMD_HELP(x)
#endif
-#define U_BOOT_CMD_MKENT_COMPLETE(name,maxargs,rep,cmd,usage,help,comp) \
- {#name, maxargs, rep, cmd, usage, _CMD_HELP(help) _CMD_COMPLETE(comp)}
+#define U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
+ _usage, _help, _comp) \
+ { #_name, _maxargs, _rep, _cmd, _usage, \
+ _CMD_HELP(_help) _CMD_COMPLETE(_comp) }
-#define U_BOOT_CMD_MKENT(name,maxargs,rep,cmd,usage,help) \
- U_BOOT_CMD_MKENT_COMPLETE(name,maxargs,rep,cmd,usage,help,NULL)
+#define U_BOOT_CMD_MKENT(_name, _maxargs, _rep, _cmd, _usage, _help) \
+ U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
+ _usage, _help, NULL)
-#define U_BOOT_CMD_COMPLETE(name,maxargs,rep,cmd,usage,help,comp) \
- cmd_tbl_t __u_boot_cmd_##name Struct_Section = \
- U_BOOT_CMD_MKENT_COMPLETE(name,maxargs,rep,cmd,usage,help,comp)
+#define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \
+ ll_entry_declare(cmd_tbl_t, _name, cmd, cmd) = \
+ U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
+ _usage, _help, _comp);
-#define U_BOOT_CMD(name,maxargs,rep,cmd,usage,help) \
- U_BOOT_CMD_COMPLETE(name,maxargs,rep,cmd,usage,help,NULL)
+#define U_BOOT_CMD(_name, _maxargs, _rep, _cmd, _usage, _help) \
+ U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL)
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
void fixup_cmdtable(cmd_tbl_t *cmdtp, int size);
int getenv_f (const char *name, char *buf, unsigned len);
ulong getenv_ulong(const char *name, int base, ulong default_val);
int saveenv (void);
-#ifdef CONFIG_PPC /* ARM version to be fixed! */
-int inline setenv (const char *, const char *);
-#else
int setenv (const char *, const char *);
int setenv_ulong(const char *varname, ulong value);
int setenv_addr(const char *varname, const void *addr);
-#endif /* CONFIG_PPC */
#ifdef CONFIG_ARM
# include <asm/mach-types.h>
# include <asm/setup.h>
#endif /* MPC860ADS */
-/*** AMX860 **********************************************/
-
-#if defined(CONFIG_AMX860)
-
-/* This ENET stuff is for the AMX860 with ethernet on SCC1.
- */
-
-#define PROFF_ENET PROFF_SCC1
-#define CPM_CR_ENET CPM_CR_CH_SCC1
-#define SCC_ENET 0
-
-#define PA_ENET_RXD ((ushort)0x0001)
-#define PA_ENET_TXD ((ushort)0x0002)
-#define PA_ENET_TCLK ((ushort)0x0400)
-#define PA_ENET_RCLK ((ushort)0x0800)
-
-#define PB_ENET_TENA ((uint)0x00001000)
-
-#define PC_ENET_CLSN ((ushort)0x0010)
-#define PC_ENET_RENA ((ushort)0x0020)
-
-#define SICR_ENET_MASK ((uint)0x000000ff)
-#define SICR_ENET_CLKRT ((uint)0x0000003e)
-
-/* 68160 PHY control */
-
-#define PB_ENET_ETHLOOP ((uint)0x00020000)
-#define PB_ENET_TPFLDL ((uint)0x00010000)
-#define PB_ENET_TPSQEL ((uint)0x00008000)
-#define PD_ENET_ETH_EN ((ushort)0x0004)
-
-#endif /* CONFIG_AMX860 */
-
/*** BSEIP **********************************************************/
#ifdef CONFIG_BSEIP
#define SICR_ENET_CLKRT ((uint)0x00003400)
#endif /* CONFIG_FLAGADM */
-/*** C2MON **********************************************************/
-
-#ifdef CONFIG_C2MON
-
-# ifndef CONFIG_FEC_ENET /* use SCC for 10Mbps Ethernet */
-# error "Ethernet on SCC not supported on C2MON Board!"
-# else /* Use FEC for Fast Ethernet */
-
-#undef SCC_ENET
-#define FEC_ENET
-
-#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
-#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
-#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
-#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
-#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
-#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
-#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
-#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
-#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
-#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
-#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
-#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
-#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
-
-#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
-
-# endif /* CONFIG_FEC_ENET */
-#endif /* CONFIG_C2MON */
-
-/*********************************************************************/
-
/*** ELPT860 *********************************************************/
#ifdef CONFIG_ELPT860
#endif /* CONFIG_HERMES */
-/*** IAD210 **********************************************************/
-
-/* The IAD210 uses the FEC on a MPC860P for Ethernet */
-
-#if defined(CONFIG_IAD210)
-
-# define FEC_ENET /* use FEC for Ethernet */
-# undef SCC_ENET
-
-# define PD_MII_TXD1 ((ushort) 0x1000 ) /* PD 3 */
-# define PD_MII_TXD2 ((ushort) 0x0800 ) /* PD 4 */
-# define PD_MII_TXD3 ((ushort) 0x0400 ) /* PD 5 */
-# define PD_MII_RX_DV ((ushort) 0x0200 ) /* PD 6 */
-# define PD_MII_RX_ERR ((ushort) 0x0100 ) /* PD 7 */
-# define PD_MII_RX_CLK ((ushort) 0x0080 ) /* PD 8 */
-# define PD_MII_TXD0 ((ushort) 0x0040 ) /* PD 9 */
-# define PD_MII_RXD0 ((ushort) 0x0020 ) /* PD 10 */
-# define PD_MII_TX_ERR ((ushort) 0x0010 ) /* PD 11 */
-# define PD_MII_MDC ((ushort) 0x0008 ) /* PD 12 */
-# define PD_MII_RXD1 ((ushort) 0x0004 ) /* PD 13 */
-# define PD_MII_RXD2 ((ushort) 0x0002 ) /* PD 14 */
-# define PD_MII_RXD3 ((ushort) 0x0001 ) /* PD 15 */
-
-# define PD_MII_MASK ((ushort) 0x1FFF ) /* PD 3...15 */
-
-#endif /* CONFIG_IAD210 */
-
/*** ICU862 **********************************************************/
#if defined(CONFIG_ICU862)
#endif /* CONFIG_KUP4K */
-
-/*** LANTEC *********************************************************/
-
-#if defined(CONFIG_LANTEC) && CONFIG_LANTEC >= 2
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC2 use.
- */
-#define PROFF_ENET PROFF_SCC2
-#define CPM_CR_ENET CPM_CR_CH_SCC2
-#define SCC_ENET 1
-#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
-#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
-#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */
-#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
-
-#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
-
-#define PC_ENET_LBK ((ushort)0x0010) /* PC 11 */
-#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
-#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
-
-/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK2) to
- * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
- */
-#define SICR_ENET_MASK ((uint)0x0000FF00)
-#define SICR_ENET_CLKRT ((uint)0x00002E00)
-#endif /* CONFIG_LANTEC v2 */
-
/*** LWMON **********************************************************/
#if defined(CONFIG_LWMON)
#endif /* CONFIG_SXNI855T */
-/*** MVS1, TQM823L/M, TQM850L/M, TQM885D, ETX094, R360MPI **********/
+/*** MVS1, TQM823L/M, TQM850L/M, TQM885D, R360MPI **********/
#if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \
defined(CONFIG_R360MPI) || defined(CONFIG_RBC823) || \
- defined(CONFIG_TQM823L) || defined(CONFIG_TQM823M) || \
- defined(CONFIG_TQM850L) || defined(CONFIG_TQM850M) || \
- defined(CONFIG_TQM885D) || defined(CONFIG_ETX094) || \
- defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2)|| \
- (defined(CONFIG_LANTEC) && CONFIG_LANTEC < 2)
+ defined(CONFIG_RRVISION)|| defined(CONFIG_TQM823L) || \
+ defined(CONFIG_TQM823M) || defined(CONFIG_TQM850L) || \
+ defined(CONFIG_TQM850M) || defined(CONFIG_TQM885D) || \
+ defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2)
/* Bits in parallel I/O port registers that have to be set/cleared
* to configure the pins for SCC2 use.
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#endif
+#if defined(CONFIG_CMD_FAT) && !defined(CONFIG_FS_FAT)
+#define CONFIG_FS_FAT
+#endif
+
+#if (defined(CONFIG_CMD_EXT4) || defined(CONFIG_CMD_EXT2)) && \
+ !defined(CONFIG_FS_EXT4)
+#define CONFIG_FS_EXT4
+#endif
+
+#if defined(CONFIG_CMD_EXT4_WRITE) && !defined(CONFIG_EXT4_WRITE)
+#define CONFIG_EXT4_WRITE
+#endif
+
#endif /* __CONFIG_FALLBACKS_H */
#define CONFIG_PHY_NATSEMI
#define CONFIG_PHY_LXT
#define CONFIG_PHY_ATHEROS
+#define CONFIG_PHY_SMSC
#ifdef CONFIG_PHYLIB_10G
#define CONFIG_PHY_TERANETICS
+++ /dev/null
-/*
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC860 1
-#define CONFIG_AMX860 1
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#undef CONFIG_8xx_CONS_SMC1 /* Console is on SCC2 */
-#undef CONFIG_8xx_CONS_SMC2
-#define CONFIG_8xx_CONS_SCC2 1
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-
-#define MPC8XX_FACT 10 /* Multiply by 10 */
-#define MPC8XX_XIN 5000000 /* 5 MHz in */
-#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
-
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_BOOTCOMMAND \
- "bootp;" \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
- "bootm" /* autoboot command */
-
-#undef CONFIG_BOOTARGS
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-
-#if defined(CONFIG_CMD_KGDB)
-#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
-#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */
-#endif
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_SUBNETMASK
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0200000 /* 1 ... 4 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * U-Boot for AMX board supports two types of memory extension
- * modules: one that provides 4 MB flash memory, and another one with
- * 16 MB EDO DRAM.
- *
- * The flash module swaps the CS0 and CS1 signals: if the module is
- * installed, CS0 is connected to Flash on the module and CS1 is
- * connected to the on-board Flash. This means that you must intall
- * U-Boot when the Flash module is plugged in, if you plan to use
- * it.
- *
- * To enable support for the DRAM extension card, CONFIG_AMX_RAM_EXT
- * must be defined. The DRAM module uses CS1.
- *
- * Only one of these modules may be installed at a time. If U-Boot
- * is compiled with the CONFIG_AMX_RAM_EXT option set, it will not
- * work if the Flash extension module is installed instead of the
- * DRAM module.
- */
-#define CONFIG_AMX_RAM_EXT /* 16Mb Ext. DRAM module support */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- *
- * Use 4 MB for without and 8 MB with 16 MB DRAM extension module
- * (CONFIG_AMX_RAM_EXT)
- */
-#ifdef CONFIG_AMX_RAM_EXT
-# define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-#else
-# define CONFIG_SYS_BOOTMAPSZ (4 << 20) /* Initial Memory map for Linux */
-#endif
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control (15-29)
- */
-#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
- PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
-#define CONFIG_SYS_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
-
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-#ifndef CONFIG_AMX_RAM_EXT
-#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */
-#endif
-
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xFFC00000 /* OR addr mask */
-
-/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
-/* 0x00000800 0x00000400 0x00000100 0x00000030 0x00000004 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-
-#define CONFIG_SYS_OR0_PRELIM 0xFFC00954 /* Real values for the board */
-#define CONFIG_SYS_BR0_PRELIM 0x40000001 /* Real values for the board */
-
-#ifndef CONFIG_AMX_RAM_EXT
-#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
-#define CONFIG_SYS_OR1_PRELIM 0xFFC00954 /* Real values for the board */
-#define CONFIG_SYS_BR1_PRELIM 0x60000001 /* Real values for the board */
-#endif
-
-/* DSP ("Glue") Xilinx */
-#define CONFIG_SYS_OR6_PRELIM 0xFFFF8000 /* 32kB, 15 waits, cs after addr, no bursts */
-#define CONFIG_SYS_BR6_PRELIM 0x60000401 /* use GPCM for CS generation, 8 bit port */
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- *
- * Configuration settings for the CU824 board.
- *
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC824X 1
-#define CONFIG_MPC8245 1
-#define CONFIG_BMW 1
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#define CONFIG_BOOTCOMMAND "bootm FF820000" /* autoboot command */
-#define CONFIG_BOOTDELAY 5
-
-#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Only use Onboard TSOP-16MB device */
-#define DOC_PASSIVE_PROBE 1
-#define CONFIG_SYS_DOC_SUPPORT_2000 1
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM 1
-#define CONFIG_SYS_DOC_SHORT_TIMEOUT 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_ELF
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-
-
-#if 0
-#define CONFIG_PCI 1
-#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=>" /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-/* Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_MAXARGS 8 /* Max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-#define CONFIG_SYS_FLASH_BASE0_PRELIM 0xFFF00000 /* FLASH bank on RCS#0 */
-#define CONFIG_SYS_FLASH_BASE1_PRELIM 0xFF800000 /* FLASH bank on RCS#1 */
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_FLASH_BANKS { CONFIG_SYS_FLASH_BASE0_PRELIM , CONFIG_SYS_FLASH_BASE1_PRELIM }
-
-/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
- * reset vector is actually located at FFB00100, but the 8245
- * takes care of us.
- */
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (2048 << 10) /* Reserve 2MB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
-
- /* Maximum amount of RAM.
- */
-#define CONFIG_SYS_MAX_RAM_SIZE 0x04000000 /* 0 .. 64 MB of (S)DRAM */
-
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#undef CONFIG_SYS_RAMBOOT
-#else
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MONITOR_LEN
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8240 user's manual.
- */
-
-#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_SYS_ETH_DEV_FN 0x7800
-#define CONFIG_SYS_ETH_IOBASE 0x00104000
-
- /* Bit-field values for MCCR1.
- */
-#define CONFIG_SYS_ROMNAL 0xf
-#define CONFIG_SYS_ROMFAL 0x1f
-#define CONFIG_SYS_DBUS_SIZE 0x3
-
- /* Bit-field values for MCCR2.
- */
-#define CONFIG_SYS_TSWAIT 0x5 /* Transaction Start Wait States timer */
-#define CONFIG_SYS_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */
-
- /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
- */
-#define CONFIG_SYS_BSTOPRE 0 /* FIXME: was 192 */
-
- /* Bit-field values for MCCR3.
- */
-#define CONFIG_SYS_REFREC 2 /* Refresh to activate interval */
-
- /* Bit-field values for MCCR4.
- */
-#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval FIXME: was 2 */
-#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval FIXME: was 5 */
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
-#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
-#define CONFIG_SYS_SDMODE_BURSTLEN 3 /* SDMODE Burst length */
-#define CONFIG_SYS_ACTORW 0xa /* FIXME was 2 */
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-
-#define CONFIG_SYS_PGMAX 0x0 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
-
-#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x3ff00000
-#define CONFIG_SYS_BANK1_END 0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE 0
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x3ff00000
-#define CONFIG_SYS_BANK4_END 0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x3ff00000
-#define CONFIG_SYS_BANK5_END 0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x3ff00000
-#define CONFIG_SYS_BANK6_END 0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x3ff00000
-#define CONFIG_SYS_BANK7_END 0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE 0
-
-#define CONFIG_SYS_ODCR 0xff
-
-#define CONFIG_PCI 1 /* Include PCI support */
-#undef CONFIG_PCI_PNP
-
-/* PCI Memory space(s) */
-#define PCI_MEM_SPACE1_START 0x80000000
-#define PCI_MEM_SPACE2_START 0xfd000000
-
-/* ROM Spaces */
-#include "../board/bmw/bmw.h"
-
-/* BAT configuration */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 0 /* Max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors per flash */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/*
- * Warining: environment is not EMBEDDED in the U-Boot code.
- * It's stored in flash separately.
- */
-#define CONFIG_ENV_IS_IN_NVRAM 1
-#define CONFIG_ENV_OVERWRITE 1
-#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE 1
-#define CONFIG_ENV_ADDR 0x7c004000 /* right at the start of NVRAM */
-#define CONFIG_ENV_SIZE 0x1ff0 /* Size of the Environment - 8K */
-#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */
-
-/*
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-#endif /* __CONFIG_H */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
-#define CONFIG_ETX094 1 /* ...on a ETX_094 board */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 57600
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#define CONFIG_BOARD_TYPES 1 /* support board types */
-
-#define CONFIG_FLASH_16BIT /* for board with 16bit wide flash */
-#undef SB_ETX094 /* only for SB-Board with 16MB SDRAM */
-#define CONFIG_BOOTP_RANDOM_DELAY /* graceful BOOTP recovery mode */
-
-#define CONFIG_ETHADDR 08:00:06:00:00:00
-
-#ifdef CONFIG_ETHADDR
-#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 /* default MAC can be overwritten once */
-#endif
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_RAMBOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/ram rw ramdisk_size=4690 " \
- "U-Boot_version=U-Boot-1.0.x-Date " \
- "panic=1 " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-#define CONFIG_NFSBOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${nfsip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#define CONFIG_WATCHDOG 1 /* watchdog enabled */
-
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#ifdef DEBUG
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#ifdef CONFIG_FLASH_16BIT
-#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */
-#else
-#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-#endif
-
-/*-----------------------------------------------------------------------
- * Hardware Information Block
- */
-#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
-#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
-#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit - leave PLL multiplication factor unchanged !
- */
-#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
-#define CONFIG_SYS_SCCR (SCCR_TBS | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 1, CSNT = 0, SCY = 2, EHTR = 0 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV2 | OR_BI | \
- OR_SCY_2_CLK | OR_TRLX )
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-
-#ifdef CONFIG_FLASH_16BIT /* 16 bit data port */
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
-#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
-#else /* 32 bit data port */
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32)
-#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32)
-#endif /* CONFIG_FLASH_16BIT */
-
-#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
-#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
-
-/*
- * BR2/3 and OR2/3 (SDRAM)
- *
- */
-#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
-
-#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM
-#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA 23 /* start with divider for 100 MHz */
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X)
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X)
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/*
- * (C) Copyright 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <mpc8xx_irq.h>
-
-
-# ifdef DEBUG
-# warning DEBUG Defined
-# endif /* DEBUG */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC860 1
-#define CONFIG_IAD210 1 /* ...on a IAD210 module */
-#define CONFIG_MPC860T 1
-#define CONFIG_MPC862 1
-
-#define CONFIG_SYS_TEXT_BASE 0x08000000
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-
-#undef CONFIG_8xx_CONS_SMC1
-#undef CONFIG_8xx_CONS_SMC2
-#define CONFIG_8xx_CONS_SCC2 /* V24 on SCC2 */
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600
-
-
-# define MPC8XX_FACT 16
-# define CONFIG_8xx_GCLK_FREQ (64000000L) /* define if can't use get_gclk_freq */
-# define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#if 0
-# define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-# define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-/* using this define saves us updating another source file */
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R
-
-#undef CONFIG_BOOTARGS
-/* #define CONFIG_BOOTCOMMAND \
- "bootp;" \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
- "bootm"
-*/
-
-#define CONFIG_BOOTCOMMAND \
- "setenv bootargs root=/dev/nfs" \
- "ip=192.168.28.129:139.10.137.138:192.168.28.1:255.255.255.0:iadlinux002::off; " \
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/* #define CONFIG_STATUS_LED 1*/ /* Status LED enabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-# undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
-# define CONFIG_FEC_ENET 1 /* use FEC ethernet */
-# define CONFIG_MII 1
-# define CONFIG_SYS_DISCOVER_PHY 1
-# define CONFIG_FEC_UTOPIA 1
-# define CONFIG_ETHADDR 08:00:06:26:A2:6D
-# define CONFIG_IPADDR 192.168.28.128
-# define CONFIG_SERVERIP 139.10.137.138
-# define CONFIG_SYS_DISCOVER_PHY 1
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-# define CONFIG_SYS_I2C_SPEED 50000
-# define CONFIG_SYS_I2C_SLAVE 0xDD
-# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define PB_SCL 0x00000020 /* PB 26 */
-#define PB_SDA 0x00000010 /* PB 27 */
-
-#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
-#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
-#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
-#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
-#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
- else immr->im_cpm.cp_pbdat &= ~PB_SDA
-#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
- else immr->im_cpm.cp_pbdat &= ~PB_SCL
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFFF00000
-#define CONFIG_SYS_IMMR_SIZE ((uint)(64 * 1024))
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x08000000
-#define CONFIG_SYS_FLASH_SIZE ((uint)(4 * 1024 * 1024)) /* max 16Mbyte */
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#if defined(DEBUG)
-# define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-# define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-
-# define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-# define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x8000
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control (15-29)
- */
-#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
- PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
-
-#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_COM00 | SCCR_DFSYNC00 | \
- SCCR_DFBRG00 | SCCR_DFNL000 | SCCR_DFNH000 | \
- SCCR_DFLCD000 |SCCR_DFALCD00 )
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration Register 19-4
- *-----------------------------------------------------------------------
- */
-/* +0x09C4 => DRQP = 10 (IDMA requests have lowest priority) */
-#define CONFIG_SYS_RCCR 0x0020
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- */
-#define PCMCIA_MEM_ADDR ((uint)0xff020000)
-#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER 0
-
-/* Because of the way the 860 starts up and assigns CS0 the
-* entire address space, we have to set the memory controller
-* differently. Normally, you write the option register
-* first, and then enable the chip select by writing the
-* base register. For CS0, you must write the base register
-* first, followed by the option register.
-*/
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0xF8000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xF8000000 /* OR addr mask */
-
-/* FLASH timing:
- TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | \
- OR_SCY_3_CLK | OR_EHTR)
-
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
-
-/*
- * BR2/3 and OR2/3 (SDRAM)
- *
- */
-#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-
-#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | OR_CSNT_SAM | OR_BI | OR_ACS_DIV4)
-#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA 124 /* start with divider for 64 MHz */
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_8X)
-
-#ifdef CONFIG_MPC860T
-
-/* Interrupt level assignments.
-*/
-#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
-
-#endif /* CONFIG_MPC860T */
-
-
-#endif /* __CONFIG_H */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
* IDE/ATA stuff
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
+#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */
#define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */
#define CONFIG_IDE_RESET 1 /* reset for ide supported */
* IDE/ATA stuff
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
+#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */
#define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */
#define CONFIG_IDE_RESET 1 /* reset for ide supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+++ /dev/null
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2001
- * Torsten Stevens, FHG IMS, stevens@ims.fhg.de
- * Bruno Achauer, Exet AG, bruno@exet-ag.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- * [derived from config_TQM850L.h]
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
-#define CONFIG_LANTEC 2 /* ...on a Lantec rev.2 board */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-/*
- * Port assignments (CONFIG_LANTEC == 1):
- * - SMC1: J11 (MDB) ?
- * - SMC2: J6 (Feature connector)
- * - SCC2: J9 (RJ45)
- * - SCC3: J8 (Sub-D9)
- *
- * Port assignments (CONFIG_LANTEC == 2): TBD
- */
-
-
-#undef CONFIG_8xx_CONS_SMC2 /* Console is on SMC2 */
-#define CONFIG_8xx_CONS_SCC3
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "setenv bootargs root=/dev/ram panic=5;bootm 40040000 400A0000"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_XIMG
-
-#if !(CONFIG_LANTEC >= 2)
- #undef CONFIG_CMD_DATE
- #undef CONFIG_CMD_NET
-#endif
-
-
-#if CONFIG_LANTEC >= 2
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_DLK)
-
-/*-----------------------------------------------------------------------
- * Clock Setting - Has the Lantec board a 32kHz clock ??? [XXX]
- *-----------------------------------------------------------------------
- */
-#define CONFIG_8xx_GCLK_FREQ 33000000
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
- */
- /* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
- /* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_SCCR (SCCR_TBS | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/5 and OR0/5 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-#define FLASH_BASE5_PRELIM 0x60000000 /* FLASH bank #1 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/* FLASH timing */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | \
- OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
-
-#define CONFIG_SYS_OR5_REMAP CONFIG_SYS_OR0_REMAP
-#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_OR0_PRELIM
-#define CONFIG_SYS_BR5_PRELIM ((FLASH_BASE5_PRELIM & BR_BA_MSK) | BR_V )
-
-/*
- * BR2/3 and OR2/3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
-
-/* SDRAM timing: Multiplexed addresses */
-#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM)
-
-#define CONFIG_SYS_OR3_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL \
- ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT ""
-#define MTDPARTS_DEFAULT ""
-*/
-
-#endif /* __CONFIG_H */
--- /dev/null
+/*
+ * Configuation settings for the Freescale MCF54418 TWR board.
+ *
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _M54418TWR_H
+#define _M54418TWR_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF5441x /* define processor family */
+#define CONFIG_M54418 /* define processor type */
+#define CONFIG_M54418TWR /* M54418TWR board */
+
+#define CONFIG_MCFUART
+#define CONFIG_SYS_UART_PORT (0)
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+
+#undef CONFIG_WATCHDOG
+
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#undef CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_UBI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_NAND_YAFFS
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#undef CONFIG_CMD_IMLS
+
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+
+/*
+ * NAND FLASH
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_JFFS2_NAND
+#define CONFIG_NAND_FSL_NFC
+#define CONFIG_SYS_NAND_BASE 0xFC0FC000
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
+#define CONFIG_SYS_NAND_SELECT_DEVICE
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+#endif
+
+/* Network configuration */
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+#define CONFIG_NET_MULTI 1
+#define CONFIG_MII 1
+#define CONFIG_MII_INIT 1
+#define CONFIG_SYS_DISCOVER_PHY
+#define CONFIG_SYS_RX_ETH_BUFFER 2
+#define CONFIG_SYS_FAULT_ECCONFIG_SYS_NO_FLASHHO_LINK_DOWN
+#define CONFIG_SYS_TX_ETH_BUFFER 2
+#define CONFIG_HAS_ETH1
+
+#define CONFIG_SYS_FEC0_PINMUX 0
+#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
+#define CONFIG_SYS_FEC1_PINMUX 0
+#define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_MIIBASE
+#define MCFFEC_TOUT_LOOP 50000
+#define CONFIG_SYS_FEC0_PHYADDR 0
+#define CONFIG_SYS_FEC1_PHYADDR 1
+
+#define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */
+
+#ifdef CONFIG_SYS_NAND_BOOT
+#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw rootfstype=jffs2 " \
+ "mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro," \
+ "-(jffs2) console=ttyS0,115200"
+#else
+#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=" \
+ __stringify(CONFIG_SERVERIP) ":/tftpboot/" \
+ __stringify(CONFIG_IPADDR) " ip=" \
+ __stringify(CONFIG_IPADDR) ":" \
+ __stringify(CONFIG_SERVERIP)":" \
+ __stringify(CONFIG_GATEWAYIP)": " \
+ __stringify(CONFIG_NETMASK) \
+ "::eth0:off:rw console=ttyS0,115200"
+#endif
+
+#define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
+#define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61
+#define CONFIG_ETHPRIME "FEC0"
+#define CONFIG_IPADDR 192.168.1.2
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
+
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+#define CONFIG_SYS_FEC_BUF_USE_SRAM
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#ifndef CONFIG_SYS_DISCOVER_PHY
+#define FECDUPLEX FULL
+#define FECSPEED _100BASET
+#define LINKSTATUS 1
+#else
+#define LINKSTATUS 0
+#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#endif
+#endif /* CONFIG_SYS_DISCOVER_PHY */
+#endif
+
+#define CONFIG_HOSTNAME M54418TWR
+
+#if defined(CONFIG_CF_SBF)
+/* ST Micro serial flash */
+#define CONFIG_SYS_LOAD_ADDR2 0x40010007
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
+ "loadaddr=0x40010000\0" \
+ "sbfhdr=sbfhdr.bin\0" \
+ "uboot=u-boot.bin\0" \
+ "load=tftp ${loadaddr} ${sbfhdr};" \
+ "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \
+ "upd=run load; run prog\0" \
+ "prog=sf probe 0:1 1000000 3;" \
+ "sf erase 0 40000;" \
+ "sf write ${loadaddr} 0 40000;" \
+ "save\0" \
+ ""
+#elif defined(CONFIG_SYS_NAND_BOOT)
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
+ "loadaddr=0x40010000\0" \
+ "u-boot=u-boot.bin\0" \
+ "load=tftp ${loadaddr} ${u-boot};\0" \
+ "upd=run load; run prog\0" \
+ "prog=nand device 0;" \
+ "nand erase 0 40000;" \
+ "nb_update ${loadaddr} ${filesize};" \
+ "save\0" \
+ ""
+#else
+#define CONFIG_SYS_UBOOT_END 0x3FFFF
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
+ "loadaddr=40010000\0" \
+ "u-boot=u-boot.bin\0" \
+ "load=tftp ${loadaddr) ${u-boot}\0" \
+ "upd=run load; run prog\0" \
+ "prog=prot off mram" " ;" \
+ "cp.b ${loadaddr} 0 ${filesize};" \
+ "save\0" \
+ ""
+#endif
+
+/* Realtime clock */
+#undef CONFIG_MCFRTC
+#define CONFIG_RTC_MCFRRTC
+#define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000
+
+/* Timer */
+#define CONFIG_MCFTMR
+#undef CONFIG_MCFPIT
+
+/* I2c */
+#undef CONFIG_FSL_I2C
+#undef CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SPEED 80000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x58000
+#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
+
+/* DSPI and Serial Flash */
+#define CONFIG_CF_SPI
+#define CONFIG_CF_DSPI
+#define CONFIG_SERIAL_FLASH
+#define CONFIG_HARD_SPI
+#define CONFIG_SYS_SBFHDR_SIZE 0x7
+#ifdef CONFIG_CMD_SPI
+# define CONFIG_SPI_FLASH
+# define CONFIG_SPI_FLASH_ATMEL
+
+# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \
+ DSPI_CTAR_PCSSCK_1CLK | \
+ DSPI_CTAR_PASC(0) | \
+ DSPI_CTAR_PDT(0) | \
+ DSPI_CTAR_CSSCK(0) | \
+ DSPI_CTAR_ASC(0) | \
+ DSPI_CTAR_DT(1))
+# define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0)
+# define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0)
+#endif
+
+/* Input, PCI, Flexbus, and VCO */
+#define CONFIG_EXTRA_CLOCK
+
+#define CONFIG_PRAM 2048 /* 2048 KB */
+
+/* HUSH */
+#define CONFIG_SYS_HUSH_PARSER 1
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+#define CONFIG_SYS_PROMPT "-> "
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)
+
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_SYS_MBAR 0xFC000000
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
+/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
+#define CONFIG_SYS_INIT_RAM_CTRL 0x221
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE 256
+#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - \
+ CONFIG_SYS_GBL_DATA_SIZE) - 32)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32)
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_SDRAM_SIZE 128 /* SDRAM size in MB */
+
+#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400)
+#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
+#define CONFIG_SYS_DRAM_TEST
+
+#if defined(CONFIG_CF_SBF) || defined(CONFIG_SYS_NAND_BOOT)
+#define CONFIG_SERIAL_BOOT
+#endif
+
+#if defined(CONFIG_SERIAL_BOOT)
+#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400)
+#else
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
+#endif
+
+#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024)
+/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN (256 << 10)
+/* Reserve 256 kB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN (256 << 10)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \
+ (CONFIG_SYS_SDRAM_SIZE << 20))
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#if !defined(CONFIG_SERIAL_BOOT) /*MRAM boot*/
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_MRAM 1
+#define CONFIG_ENV_ADDR (0x40000 - 0x1000) /*MRAM size 40000*/
+#define CONFIG_ENV_SIZE 0x1000
+#endif
+
+#if defined(CONFIG_CF_SBF)
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_SPI_FLASH 1
+#define CONFIG_ENV_SPI_CS 1
+#define CONFIG_ENV_OFFSET 0x40000
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#endif
+#if defined(CONFIG_SYS_NAND_BOOT)
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_OFFSET 0x80000
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#endif
+#undef CONFIG_ENV_OVERWRITE
+
+/* FLASH organization */
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
+
+#undef CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
+
+#define CONFIG_FLASH_CFI_DRIVER 1
+/* Max size that the board might have */
+#define CONFIG_SYS_FLASH_SIZE 0x1000000
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT 270
+/* "Real" (hardware) sectors protection */
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE }
+#else
+/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT 270
+/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 0
+#endif
+
+/*
+ * This is setting for JFFS2 support in u-boot.
+ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
+ */
+#ifdef CONFIG_CMD_JFFS2
+#define CONFIG_JFFS2_DEV "nand0"
+#define CONFIG_JFFS2_PART_OFFSET (0x800000)
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE
+#define MTDIDS_DEFAULT "nand0=m54418twr.nand"
+
+#define MTDPARTS_DEFAULT "mtdparts=m54418twr.nand:1m(data)," \
+ "7m(kernel)," \
+ "-(rootfs)"
+
+#endif
+
+#ifdef CONFIG_CMD_UBI
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE /* needed for mtdparts command */
+#define CONFIG_MTD_PARTITIONS /* mtdparts and UBI support */
+#define CONFIG_RBTREE
+#define MTDIDS_DEFAULT "nand0=NAND"
+#define MTDPARTS_DEFAULT "mtdparts=NAND:1m(u-boot)," \
+ "-(ubi)"
+#endif
+/* Cache Configuration */
+#define CONFIG_SYS_CACHELINE_SIZE 16
+#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - 8)
+#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - 4)
+#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA)
+#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA)
+#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+ CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \
+ CF_CACR_ICINVA | CF_CACR_EUSP)
+#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \
+ CF_CACR_DEC | CF_CACR_DDCM_P | \
+ CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
+
+#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - 12)
+
+/*-----------------------------------------------------------------------
+ * Memory bank definitions
+ */
+/*
+ * CS0 - NOR Flash 16MB
+ * CS1 - Available
+ * CS2 - Available
+ * CS3 - Available
+ * CS4 - Available
+ * CS5 - Available
+ */
+
+ /* Flash */
+#define CONFIG_SYS_CS0_BASE 0x00000000
+#define CONFIG_SYS_CS0_MASK 0x000F0101
+#define CONFIG_SYS_CS0_CTRL 0x00001D60
+
+#endif /* _M54418TWR_H */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*/
#define CONFIG_E300 1 /* E300 family */
#define CONFIG_MPC83xx 1 /* MPC83xx family */
+#define CONFIG_MPC830x 1 /* MPC830x family */
#define CONFIG_MPC8308 1 /* MPC8308 CPU specific */
#define CONFIG_MPC8308RDB 1 /* MPC8308RDB board specific */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
#define CONFIG_PCIE4
#define CONFIG_SYS_DPAA_RMAN
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1 /* SRIO port 1 */
+#define CONFIG_SRIO2 /* SRIO port 2 */
+
#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
#include "corenet_ds.h"
#define CONFIG_MMC
#define CONFIG_PCIE3
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1 /* SRIO port 1 */
+#define CONFIG_SRIO2 /* SRIO port 2 */
+
#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 ref clk freq */
#include "corenet_ds.h"
#define CONFIG_SYS_FSL_RAID_ENGINE
#define CONFIG_SYS_DPAA_RMAN
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1 /* SRIO port 1 */
+#define CONFIG_SRIO2 /* SRIO port 2 */
+
#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
#include "corenet_ds.h"
*/
#if 1
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
* IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+++ /dev/null
-/*
- * (C) Copyright 2002,2003 Motorola,Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
- * Added support for Wind River SBC8540 board
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * sbc8540 board configuration file.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Top level Makefile configuration choices
- */
-#ifdef CONFIG_66
-#define CONFIG_PCI_66
-#endif
-
-#define TSEC_DEBUG
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_BOOKE 1 /* BOOKE */
-#define CONFIG_E500 1 /* BOOKE e500 family */
-#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
-#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */
-
-#define CONFIG_SYS_TEXT_BASE 0xfffc0000
-
-
-#define CONFIG_CPM2 1 /* has CPM2 */
-
-#define CONFIG_SBC8540 1 /* configuration for SBC8560 board */
-#define CONFIG_MPC8540 1
-
-#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific (supplement) */
-
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
-#undef CONFIG_PCI /* pci ethernet support */
-#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
-
-#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
-
-#define CONFIG_ENV_OVERWRITE
-
-/* Using Localbus SDRAM to emulate flash before we can program the flash,
- * normally you need a flash-boot image(u-boot.bin), if so undef this.
- */
-#undef CONFIG_RAM_AS_FLASH
-
-#if defined(CONFIG_PCI_66) /* some PCI card is 33Mhz only */
- #define CONFIG_SYS_CLK_FREQ 66000000 /* sysclk for MPC85xx */
-#else
- #define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */
-#endif
-
-/* below can be toggled for performance analysis. otherwise use default */
-#define CONFIG_L2_CACHE /* toggle L2 cache */
-#undef CONFIG_BTB /* toggle branch predition */
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
-
-#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
-#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
-#define CONFIG_SYS_MEMTEST_END 0x00400000
-
-#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
- defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
- defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
-#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
-#endif
-
-#define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */
-
-/* DDR Setup */
-#define CONFIG_FSL_DDR1
-#undef CONFIG_FSL_DDR_INTERACTIVE
-#undef CONFIG_DDR_ECC /* only for ECC DDR module */
-#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
-#undef CONFIG_DDR_SPD
-
-#if defined(CONFIG_MPC85xx_REV1)
-#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */
-#endif
-
-#undef CONFIG_DDR_ECC /* only for ECC DDR module */
-#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
-#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
-
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_NUM_DDR_CONTROLLERS 1
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL 2
-
-/* I2C addresses of SPD EEPROMs */
-#define SPD_EEPROM_ADDRESS 0x55 /* CTLR 0 DIMM 0 */
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-#if defined(CONFIG_RAM_AS_FLASH)
- #define CONFIG_SYS_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */
- #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH 8M */
- #define CONFIG_SYS_BR0_PRELIM 0xf8000801 /* port size 8bit */
- #define CONFIG_SYS_OR0_PRELIM 0xf8000ff7 /* 8MB Flash */
-#else /* Boot from real Flash */
- #define CONFIG_SYS_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */
- #define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of FLASH 8M */
- #define CONFIG_SYS_BR0_PRELIM 0xff800801 /* port size 8bit */
- #define CONFIG_SYS_OR0_PRELIM 0xff800ff7 /* 8MB Flash */
-#endif
-#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
-
-/* local bus definitions */
-#define CONFIG_SYS_BR1_PRELIM 0xe4001801 /* 64M, 32-bit flash */
-#define CONFIG_SYS_OR1_PRELIM 0xfc000ff7
-
-#define CONFIG_SYS_BR2_PRELIM 0x00000000 /* CS2 not used */
-#define CONFIG_SYS_OR2_PRELIM 0x00000000
-
-#define CONFIG_SYS_BR3_PRELIM 0xf0001861 /* 64MB localbus SDRAM */
-#define CONFIG_SYS_OR3_PRELIM 0xfc000cc1
-
-#if defined(CONFIG_RAM_AS_FLASH)
- #define CONFIG_SYS_BR4_PRELIM 0xf4001861 /* 64M localbus SDRAM */
-#else
- #define CONFIG_SYS_BR4_PRELIM 0xf8001861 /* 64M localbus SDRAM */
-#endif
-#define CONFIG_SYS_OR4_PRELIM 0xfc000cc1
-
-#define CONFIG_SYS_BR5_PRELIM 0xfc000801 /* 16M CS5 misc devices */
-#if 1
- #define CONFIG_SYS_OR5_PRELIM 0xff000ff7
-#else
- #define CONFIG_SYS_OR5_PRELIM 0xff0000f0
-#endif
-
-#define CONFIG_SYS_BR6_PRELIM 0xe0001801 /* 64M, 32-bit flash */
-#define CONFIG_SYS_OR6_PRELIM 0xfc000ff7
-#define CONFIG_SYS_LBC_LCRR 0x00030002 /* local bus freq */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-#define CONFIG_SYS_LBC_LSRT 0x20000000
-#define CONFIG_SYS_LBC_MRTPR 0x20000000
-#define CONFIG_SYS_LBC_LSDMR_1 0x2861b723
-#define CONFIG_SYS_LBC_LSDMR_2 0x0861b723
-#define CONFIG_SYS_LBC_LSDMR_3 0x0861b723
-#define CONFIG_SYS_LBC_LSDMR_4 0x1861b723
-#define CONFIG_SYS_LBC_LSDMR_5 0x4061b723
-
-/* just hijack the MOT BCSR def for SBC8560 misc devices */
-#define CONFIG_SYS_BCSR ((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000)
-/* the size of CS5 needs to be >= 16M for TLB and LAW setups */
-
-#define CONFIG_SYS_INIT_RAM_LOCK 1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
-
-/* Serial Port */
-#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else */
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#if 0
-#define CONFIG_SYS_NS16550_CLK 1843200 /* get_bus_freq(0) */
-#else
-#define CONFIG_SYS_NS16550_CLK 264000000 /* get_bus_freq(0) */
-#endif
-
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#if 0
-#define CONFIG_SYS_NS16550_COM1 ((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00700000)
-#define CONFIG_SYS_NS16550_COM2 ((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00800000)
-#else
-/* SBC8540 uses internal COMM controller */
-#define CONFIG_SYS_NS16550_COM1 ((CONFIG_SYS_CCSRBAR & 0xfff00000)+0x00004500)
-#define CONFIG_SYS_NS16550_COM2 ((CONFIG_SYS_CCSRBAR & 0xfff00000)+0x00004600)
-#endif
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * I2C
- */
-#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET 0x3000
-
-#define CONFIG_SYS_PCI_MEM_BASE 0xC0000000
-#define CONFIG_SYS_PCI_MEM_PHYS 0xC0000000
-#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000
-
-#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */
-
-# define CONFIG_MPC85xx_TSEC1
-# define CONFIG_MPC85xx_TSEC1_NAME "TSEC0"
-# define CONFIG_MII 1 /* MII PHY management */
-# define TSEC1_PHY_ADDR 25
-# define TSEC1_PHYIDX 0
-/* Options are: TSEC0 */
-# define CONFIG_ETHPRIME "TSEC0"
-
-
-#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
-
- #undef CONFIG_ETHER_NONE /* define if ether on something else */
- #define CONFIG_ETHER_ON_FCC2 /* cpm FCC ethernet support */
- #define CONFIG_ETHER_INDEX 2 /* which channel for ether */
-
- #if (CONFIG_ETHER_INDEX == 2)
- /*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
- * - Select bus for bd/buffers
- * - Full duplex
- */
- #define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
- #define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
- #define CONFIG_SYS_CPMFCR_RAMTYPE 0
- #define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE)
-
- #elif (CONFIG_ETHER_INDEX == 3)
- /* need more definitions here for FE3 */
- #endif /* CONFIG_ETHER_INDEX */
-
- #define CONFIG_MII /* MII PHY management */
- #define CONFIG_BITBANGMII /* bit-bang MII PHY management */
- /*
- * GPIO pins used for bit-banged MII communications
- */
- #define MDIO_PORT 2 /* Port C */
- #define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
- (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
- #define MDC_DECLARE MDIO_DECLARE
-
- #define MDIO_ACTIVE (iop->pdir |= 0x00400000)
- #define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
- #define MDIO_READ ((iop->pdat & 0x00400000) != 0)
-
- #define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \
- else iop->pdat &= ~0x00400000
-
- #define MDC(bit) if(bit) iop->pdat |= 0x00200000; \
- else iop->pdat &= ~0x00200000
-
- #define MIIDELAY udelay(1)
-
-#endif
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#if 0
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CONFIG_SYS_FLASH_PROTECTION /* use hardware protection */
-#endif
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-
-#if 0
-/* XXX This doesn't work and I don't want to fix it */
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
- #define CONFIG_SYS_RAMBOOT
-#else
- #undef CONFIG_SYS_RAMBOOT
-#endif
-#endif
-
-/* Environment */
-#if !defined(CONFIG_SYS_RAMBOOT)
- #if defined(CONFIG_RAM_AS_FLASH)
- #define CONFIG_ENV_IS_NOWHERE
- #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x100000)
- #define CONFIG_ENV_SIZE 0x2000
- #else
- #define CONFIG_ENV_IS_IN_FLASH 1
- #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
- #define CONFIG_ENV_SIZE 0x2000 /* CONFIG_ENV_SECT_SIZE */
- #endif
-#else
- #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
- #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
- #define CONFIG_ENV_SIZE 0x2000
-#endif
-
-#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600"
-/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/
-#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000"
-#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
- #define CONFIG_CMD_PCI
-#endif
-
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
- #define CONFIG_CMD_MII
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT)
- #undef CONFIG_CMD_SAVEENV
- #undef CONFIG_CMD_LOADS
-#endif
-
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "SBC8540=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
- #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
- #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#if defined(CONFIG_CMD_KGDB)
- #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
- #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*Note: change below for your network setting!!! */
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-# define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a
-# define CONFIG_HAS_ETH1
-# define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b
-# define CONFIG_HAS_ETH2
-# define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c
-#endif
-
-#define CONFIG_SERVERIP YourServerIP
-#define CONFIG_IPADDR YourTargetIP
-#define CONFIG_GATEWAYIP YourGatewayIP
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_HOSTNAME SBC8560
-#define CONFIG_ROOTPATH "YourRootPath"
-#define CONFIG_BOOTFILE "YourImageName"
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */
-#define CONFIG_TQM8260 200 /* ...on a TQM8260 module Rev.200 */
-#define CONFIG_SCM 1 /* ...on a System Controller Module */
-#define CONFIG_CPM2 1 /* Has a CPM2 */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#if (CONFIG_TQM8260 <= 100)
-# error "TQM8260 module revison not supported"
-#endif
-
-/* We use a TQM8260 module with a 300MHz CPU */
-#define CONFIG_300MHz
-
-/* Define 60x busmode only if your TQM8260 has L2 cache! */
-#ifdef CONFIG_L2_CACHE
-# define CONFIG_BUSMODE_60x 1 /* bus mode: 60x */
-#else
-# undef CONFIG_BUSMODE_60x /* bus mode: 8260 */
-#endif
-
-/* The board with 300MHz CPU doesn't have L2 cache, but works in 60x bus mode */
-#ifdef CONFIG_300MHz
-# define CONFIG_BUSMODE_60x
-#endif
-
-#define CONFIG_82xx_CONS_SMC1 1 /* console on SMC1 */
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-
-/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/*
- * Software (bit-bang) I2C driver configuration
- */
-
-#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE (iop->pdir |= 0x00010000)
-#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
-#define I2C_READ ((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
- else iop->pdat &= ~0x00010000
-#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
- else iop->pdat &= ~0x00020000
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-#define CONFIG_I2C_X
-
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * if CONFIG_CONS_NONE is defined, then the serial console routines must
- * defined elsewhere (for example, on the cogent platform, there are serial
- * ports on the motherboard which are used for the serial console - see
- * cogent/cma101/serial.[ch]).
- */
-#define CONFIG_CONS_ON_SMC /* define if console on SMC */
-#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else*/
-#ifdef CONFIG_82xx_CONS_SMC1
-#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
-#endif
-#ifdef CONFIG_82xx_CONS_SMC2
-#define CONFIG_CONS_INDEX 2 /* which serial channel for console */
-#endif
-
-#undef CONFIG_CONS_USE_EXTC /* SMC/SCC use ext clock not brg_clk */
-#define CONFIG_CONS_EXTC_RATE 3686400 /* SMC/SCC ext clk rate in Hz */
-#define CONFIG_CONS_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9 */
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- *
- * (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
- * X.29 connector, and FCC2 is hardwired to the X.1 connector)
- */
-#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
-#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
-#undef CONFIG_ETHER_NONE /* define if ether on something else */
-#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */
-
-#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1)
-
-/*
- * - Rx-CLK is CLK12
- * - Tx-CLK is CLK11
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK12|CMXFCR_TF1CS_CLK11)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
-
-/*
- * - Rx-CLK is CLK15
- * - Tx-CLK is CLK16
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
-
-
-/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
-#ifndef CONFIG_300MHz
-#define CONFIG_8260_CLKIN 66666666 /* in Hz */
-#else
-#define CONFIG_8260_CLKIN 83333000 /* in Hz */
-#endif
-
-#if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC)
-#define CONFIG_BAUDRATE 230400
-#else
-#define CONFIG_BAUDRATE 115200
-#endif
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_BSP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC /* "bad" address */
-
-#define CONFIG_MISC_INIT_R /* have misc_init_r() function */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-
-/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/tqm8260/config.mk
- * The main FLASH is whichever is connected to *CS0.
- */
-#define CONFIG_SYS_FLASH0_BASE 0x40000000
-#define CONFIG_SYS_FLASH1_BASE 0x60000000
-#define CONFIG_SYS_FLASH0_SIZE 32
-#define CONFIG_SYS_FLASH1_SIZE 32
-
-/* Flash bank size (for preliminary settings)
- */
-#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-
-#if 0
-/* Start port with environment in flash; switch to EEPROM later */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x40000)
-#define CONFIG_ENV_SIZE 0x40000
-#define CONFIG_ENV_SECT_SIZE 0x40000
-#else
-/* Final version: environment in EEPROM */
-#define CONFIG_ENV_IS_IN_EEPROM 1
-#define CONFIG_ENV_OFFSET 0
-#define CONFIG_ENV_SIZE 2048
-#endif
-
-/*-----------------------------------------------------------------------
- * Hardware Information Block
- */
-#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
-#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
-#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
-
-/*-----------------------------------------------------------------------
- * Hard Reset Configuration Words
- *
- * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
- * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
- */
-#if defined(CONFIG_266MHz)
-#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB111 | HRCW_BMS | \
- HRCW_MODCK_H0111)
-#elif defined(CONFIG_300MHz)
-#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB111 | HRCW_BMS | \
- HRCW_MODCK_H0110)
-#else
-#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB111 | HRCW_BMS)
-#endif
-
-/* no slaves so just fill with zeros */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- *
- * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE, local SDRAM
- * is mapped at SDRAM_BASE2_PRELIM.
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
-
-/*-----------------------------------------------------------------------
- * Hardware Information Block
- */
-#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
-#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
-#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * HIDx - Hardware Implementation-dependent Registers 2-11
- *-----------------------------------------------------------------------
- * HID0 also contains cache control - initially enable both caches and
- * invalidate contents, then the final state leaves only the instruction
- * cache enabled. Note that Power-On and Hard reset invalidate the caches,
- * but Soft reset does not.
- *
- * HID1 has only read-only information - nothing to set.
- */
-#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
- HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID0_FINAL (HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID2 0
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register 5-5
- *-----------------------------------------------------------------------
- * turn on Checkstop Reset Enable
- */
-#define CONFIG_SYS_RMR RMR_CSRE
-
-/*-----------------------------------------------------------------------
- * BCR - Bus Configuration 4-25
- *-----------------------------------------------------------------------
- */
-#ifdef CONFIG_BUSMODE_60x
-#define CONFIG_SYS_BCR (BCR_EBM|BCR_L2C|BCR_LETM|\
- BCR_NPQM0|BCR_NPQM1|BCR_NPQM2) /* 60x mode */
-#else
-#define BCR_APD01 0x10000000
-#define CONFIG_SYS_BCR (BCR_APD01|BCR_ETM|BCR_LETM) /* 8260 mode */
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 4-31
- *-----------------------------------------------------------------------
- */
-#if 0
-#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC10|SIUMCR_APPC10)
-#else
-#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC00|SIUMCR_APPC10)
-#endif
-
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 4-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control 4-40
- *-----------------------------------------------------------------------
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- */
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control 9-8
- *-----------------------------------------------------------------------
- * Ensure DFBRG is Divide by 16
- */
-#define CONFIG_SYS_SCCR 0
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration 13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR 0
-
-/*
- * Init Memory Controller:
- *
- * Bank Bus Machine PortSz Device
- * ---- --- ------- ------ ------
- * 0 60x GPCM 64 bit FLASH
- * 1 60x SDRAM 64 bit SDRAM
- * 2 Local SDRAM 32 bit SDRAM
- *
- */
-
- /* Initialize SDRAM on local bus
- */
-#define CONFIG_SYS_INIT_LOCAL_SDRAM
-
-#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
-
-/* Minimum mask to separate preliminary
- * address ranges for CS[0:2]
- */
-#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (512<<20) /* less than 512 MB */
-#define CONFIG_SYS_LOCAL_SDRAM_LIMIT (128<<20) /* less than 128 MB */
-
-#define CONFIG_SYS_MPTPR 0x4000
-
-/*-----------------------------------------------------------------------------
- * Address for Mode Register Set (MRS) command
- *-----------------------------------------------------------------------------
- * In fact, the address is rather configuration data presented to the SDRAM on
- * its address lines. Because the address lines may be mux'ed externally either
- * for 8 column or 9 column devices, some bits appear twice in the 8260's
- * address:
- *
- * | (RFU) | (RFU) | WBL | TM | CL | BT | Burst Length |
- * | BA1 BA0 | A12 : A10 | A9 | A8 A7 | A6 : A4 | A3 | A2 : A0 |
- * 8 columns mux'ing: | A9 | A10 A21 | A22 : A24 | A25 | A26 : A28 |
- * 9 columns mux'ing: | A8 | A20 A21 | A22 : A24 | A25 | A26 : A28 |
- * Settings: | 0 | 0 0 | 0 1 0 | 0 | 0 1 0 |
- *-----------------------------------------------------------------------------
- */
-#define CONFIG_SYS_MRS_OFFS 0x00000110
-
-
-/* Bank 0 - FLASH
- */
-#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\
- BRx_PS_64 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\
- ORxG_CSNT |\
- ORxG_ACS_DIV1 |\
- ORxG_SCY_3_CLK |\
- ORxG_EHTR |\
- ORxG_TRLX)
-
- /* SDRAM on TQM8260 can have either 8 or 9 columns.
- * The number affects configuration values.
- */
-
-/* Bank 1 - 60x bus SDRAM
- */
-#define CONFIG_SYS_PSRT 0x20
-#define CONFIG_SYS_LSRT 0x20
-#ifndef CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\
- BRx_PS_64 |\
- BRx_MS_SDRAM_P |\
- BRx_V)
-
-#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1_8COL
-
-
- /* SDRAM initialization values for 8-column chips
- */
-#define CONFIG_SYS_OR1_8COL ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A7 |\
- ORxS_NUMR_12)
-
-#define CONFIG_SYS_PSDMR_8COL (PSDMR_PBI |\
- PSDMR_SDAM_A15_IS_A5 |\
- PSDMR_BSMA_A12_A14 |\
- PSDMR_SDA10_PBI1_A8 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_EAMUX |\
- PSDMR_CL_2)
-
- /* SDRAM initialization values for 9-column chips
- */
-#define CONFIG_SYS_OR1_9COL ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A5 |\
- ORxS_NUMR_13)
-
-#define CONFIG_SYS_PSDMR_9COL (PSDMR_PBI |\
- PSDMR_SDAM_A16_IS_A5 |\
- PSDMR_BSMA_A12_A14 |\
- PSDMR_SDA10_PBI1_A7 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_EAMUX |\
- PSDMR_CL_2)
-
-/* Bank 2 - Local bus SDRAM
- */
-#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
-#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BRx_BA_MSK) |\
- BRx_PS_32 |\
- BRx_MS_SDRAM_L |\
- BRx_V)
-
-#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_OR2_8COL
-
-#define SDRAM_BASE2_PRELIM 0x80000000
-
- /* SDRAM initialization values for 8-column chips
- */
-#define CONFIG_SYS_OR2_8COL ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A8 |\
- ORxS_NUMR_12)
-
-#define CONFIG_SYS_LSDMR_8COL (PSDMR_PBI |\
- PSDMR_SDAM_A15_IS_A5 |\
- PSDMR_BSMA_A13_A15 |\
- PSDMR_SDA10_PBI1_A9 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_BL |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_CL_2)
-
- /* SDRAM initialization values for 9-column chips
- */
-#define CONFIG_SYS_OR2_9COL ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_4 |\
- ORxS_ROWST_PBI1_A6 |\
- ORxS_NUMR_13)
-
-#define CONFIG_SYS_LSDMR_9COL (PSDMR_PBI |\
- PSDMR_SDAM_A16_IS_A5 |\
- PSDMR_BSMA_A13_A15 |\
- PSDMR_SDA10_PBI1_A8 |\
- PSDMR_RFRC_7_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_BL |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_2C |\
- PSDMR_CL_2)
-
-#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-#define CONFIG_SYS_CAN0_BASE 0xc0000000
-#define CONFIG_SYS_CAN1_BASE 0xc0008000
-#define CONFIG_SYS_FIOX_BASE 0xc0010000
-#define CONFIG_SYS_FDOHM_BASE 0xc0018000
-#define CONFIG_SYS_EXTPROM_BASE 0xc2000000
-
-#define CONFIG_SYS_CAN_SIZE 0x00000100
-#define CONFIG_SYS_FIOX_SIZE 0x00000020
-#define CONFIG_SYS_FDOHM_SIZE 0x00002000
-#define CONFIG_SYS_EXTPROM_BANK_SIZE 0x01000000
-
-#define EXT_EEPROM_MAX_FLASH_BANKS 0x02
-
-/* CS3 - CAN 0
- */
-#define CONFIG_SYS_CAN0_BR3 ((CONFIG_SYS_CAN0_BASE & BRx_BA_MSK) |\
- BRx_PS_8 |\
- BRx_MS_UPMA |\
- BRx_V)
-
-#define CONFIG_SYS_CAN0_OR3 (P2SZ_TO_AM(CONFIG_SYS_CAN_SIZE) |\
- ORxU_BI |\
- ORxU_EHTR_4IDLE)
-
-/* CS4 - CAN 1
- */
-#define CONFIG_SYS_CAN1_BR4 ((CONFIG_SYS_CAN1_BASE & BRx_BA_MSK) |\
- BRx_PS_8 |\
- BRx_MS_UPMA |\
- BRx_V)
-
-#define CONFIG_SYS_CAN1_OR4 (P2SZ_TO_AM(CONFIG_SYS_CAN_SIZE) |\
- ORxU_BI |\
- ORxU_EHTR_4IDLE)
-
-/* CS5 - Extended PROM (16MB optional)
- */
-#define CONFIG_SYS_EXTPROM_BR5 ((CONFIG_SYS_EXTPROM_BASE & BRx_BA_MSK)|\
- BRx_PS_32 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-#define CONFIG_SYS_EXTPROM_OR5 (P2SZ_TO_AM(CONFIG_SYS_EXTPROM_BANK_SIZE)|\
- ORxG_CSNT |\
- ORxG_ACS_DIV4 |\
- ORxG_SCY_5_CLK |\
- ORxG_TRLX)
-
-/* CS6 - Extended PROM (16MB optional)
- */
-#define CONFIG_SYS_EXTPROM_BR6 (((CONFIG_SYS_EXTPROM_BASE + \
- CONFIG_SYS_EXTPROM_BANK_SIZE) & BRx_BA_MSK)|\
- BRx_PS_32 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-#define CONFIG_SYS_EXTPROM_OR6 (P2SZ_TO_AM(CONFIG_SYS_EXTPROM_BANK_SIZE)|\
- ORxG_CSNT |\
- ORxG_ACS_DIV4 |\
- ORxG_SCY_5_CLK |\
- ORxG_TRLX)
-
-/* CS7 - FPGA FIOX: Glue Logic
- */
-#define CONFIG_SYS_FIOX_BR7 ((CONFIG_SYS_FIOX_BASE & BRx_BA_MSK) |\
- BRx_PS_32 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-#define CONFIG_SYS_FIOX_OR7 (P2SZ_TO_AM(CONFIG_SYS_FIOX_SIZE) |\
- ORxG_ACS_DIV4 |\
- ORxG_SCY_5_CLK |\
- ORxG_TRLX)
-
-/* CS8 - FPGA DOH Master
- */
-#define CONFIG_SYS_FDOHM_BR8 ((CONFIG_SYS_FDOHM_BASE & BRx_BA_MSK) |\
- BRx_PS_16 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-#define CONFIG_SYS_FDOHM_OR8 (P2SZ_TO_AM(CONFIG_SYS_FDOHM_SIZE) |\
- ORxG_ACS_DIV4 |\
- ORxG_SCY_5_CLK |\
- ORxG_TRLX)
-
-
-/* FPGA configuration */
-#define CONFIG_SYS_PD_FIOX_PROG (1 << (31- 5)) /* PD 5 */
-#define CONFIG_SYS_PD_FIOX_DONE (1 << (31-28)) /* PD 28 */
-#define CONFIG_SYS_PD_FIOX_INIT (1 << (31-29)) /* PD 29 */
-
-#define CONFIG_SYS_PD_FDOHM_PROG (1 << (31- 4)) /* PD 4 */
-#define CONFIG_SYS_PD_FDOHM_DONE (1 << (31-26)) /* PD 26 */
-#define CONFIG_SYS_PD_FDOHM_INIT (1 << (31-27)) /* PD 27 */
-
-
-#endif /* __CONFIG_H */
* IDE/ATA stuff
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
+#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */
#define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */
#define CONFIG_IDE_LED 1 /* LED for ide supported */
#define CONFIG_IDE_RESET 1 /* reset for ide supported */
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP1510 1 /* which is in a 1510 (helen) */
-#define CONFIG_OMAP_SX1 1 /* a SX1 Board */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 12000000 /* the SX1 has 12MHz input clock */
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK (CONFIG_SYS_CLK_FREQ) /* can be 12M/32Khz or 48Mhz */
-#define CONFIG_SYS_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SX1 */
-
-/*
- * USB device configuration
- */
-#define CONFIG_USB_DEVICE 1
-#define CONFIG_USB_TTY 1
-
-#define CONFIG_USBD_VENDORID 0x1234
-#define CONFIG_USBD_PRODUCTID 0x5678
-#define CONFIG_USBD_MANUFACTURER "Siemens"
-#define CONFIG_USBD_PRODUCT_NAME "SX1"
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP1510_I2C
-
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_I2C
-
-#undef CONFIG_CMD_NET
-
-
-#include <configs/omap1510.h>
-
-#define CONFIG_BOOTARGS "mem=16M console=ttyS0,115200n8 root=/dev/mtdblock3 rw"
-#ifdef CONFIG_STDOUT_USBTTY
-#define CONFIG_PREBOOT "setenv stdout usbtty;setenv stdin usbtty"
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "SX1# " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */
-
-/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
- * This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE /* use timer 1 */
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- * V1
- * PHYS_FLASH_SIZE_1 (16 << 10) 16 MB
- * PHYS_FLASH_SIZE_2 (8 << 10) 8 MB
- * V2 only 1 flash
- * PHYS_FLASH_SIZE_1 (32 << 10) 32 MB
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define PHYS_FLASH_SECT_SIZE (128*1024) /* Size of a sector (128kB) */
-#define CONFIG_SYS_MAX_FLASH_SECT (256) /* max number of sectors on one chip */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE) /* addr of environment */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */
-#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, PHYS_FLASH_2 }
-
-/*-----------------------------------------------------------------------
- * FLASH driver setup
- */
-#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Total Size of Environment Sector */
-#define CONFIG_ENV_OFFSET ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */
-
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_SIZE_REDUND 0x20000
-#define CONFIG_ENV_OFFSET_REDUND 0x40000
-
-#endif /* __CONFIG_H */
--- /dev/null
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * T4240 QDS board configuration file
+ */
+#define CONFIG_T4240QDS
+#define CONFIG_PHYS_64BIT
+#define CONFIG_PPC_T4240
+
+#define CONFIG_FSL_SATA_V2
+#define CONFIG_PCIE4
+
+#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
+
+#include "t4qds.h"
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
/* USB support (currently only works with D-cache off) */
#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_S3C24XX
#define CONFIG_USB_KEYBOARD
#define CONFIG_USB_STORAGE
#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT "U-Boot# "
+#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_NO_FLASH
#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
#define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
/* set to negative value for no autoboot */
#define CONFIG_BOOTDELAY 1
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
"fdtaddr=0x80F80000\0" \
"rdaddr=0x81000000\0" \
"bootfile=/boot/uImage\0" \
+ "fdtfile=\0" \
"console=ttyO0,115200n8\0" \
"optargs=\0" \
"mmcdev=0\0" \
"ramboot=echo Booting from ramdisk ...; " \
"run ramargs; " \
"bootm ${loadaddr}\0" \
+ "findfdt="\
+ "if test $board_name = A335BONE; then " \
+ "setenv fdtfile am335x-bone.dtb; fi; " \
+ "if test $board_name = A33515BB; then " \
+ "setenv fdtfile am335x-evm.dtb; fi; " \
+ "if test $board_name = A335X_SK; then " \
+ "setenv fdtfile am335x-evmsk.dtb; fi\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
"if run loadbootenv; then " \
"echo Loaded environment from ${bootenv};" \
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SERIAL_MULTI
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
+#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
+#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
+#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
+#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
+#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
/* I2C Configuration */
#define CONFIG_I2C
#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \
4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1 1
-#define CONFIG_CONS_INDEX 1
+#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_SPL_NET_SUPPORT
#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
#define CONFIG_SPL_ETH_SUPPORT
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS 0
+#define CONFIG_SPL_SPI_CS 0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
+#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
/*
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC_BOUNCE_BUFFER
+#define CONFIG_BOUNCE_BUFFER
#define CONFIG_MXS_MMC
#endif
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_NAND
#define CONFIG_CMD_SF
+#define CONFIG_CMD_MMC
/* SDRAM */
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_CMD_UBIFS
#endif
+/* MMC */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define CONFIG_DOS_PARTITION
+#endif
+
/* Ethernet */
#define CONFIG_MACB
#define CONFIG_RMII
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
#define CONFIG_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
#define CONFIG_ATMEL_SPI
#define CONFIG_SPI_FLASH
#define CONFIG_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
#define CONFIG_ATMEL_SPI
#define CONFIG_SPI_FLASH
#define CONFIG_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
#define CONFIG_SYS_DCACHE_LINESZ 32
#define CONFIG_SYS_ICACHE_LINESZ 32
#define CONFIG_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
#define CONFIG_SYS_DCACHE_LINESZ 32
#define CONFIG_SYS_ICACHE_LINESZ 32
#define CONFIG_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
#define CONFIG_SYS_DCACHE_LINESZ 32
#define CONFIG_SYS_ICACHE_LINESZ 32
#define CONFIG_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
#define CONFIG_SYS_DCACHE_LINESZ 32
#define CONFIG_SYS_ICACHE_LINESZ 32
+++ /dev/null
-/*
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC855 1 /* This is a MPC855 CPU */
-#define CONFIG_C2MON 1 /* ...on a C2MON module */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_80MHz 1 /* Running at 5 * 16 = 80 MHz */
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#undef CONFIG_STATUS_LED /* Status LED disabled */
-
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_FEC_ENET 1 /* Use Fast Ethernet Controller */
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-
-#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-#else /* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-#endif /* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
- */
-#ifdef CONFIG_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */
-#define CONFIG_SYS_PLPRCR \
- ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
-#else /* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-#endif /* CONFIG_80MHz */
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
-#ifdef CONFIG_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-#else /* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_SCCR (SCCR_TBS | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-#endif /* CONFIG_80MHz */
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * PCMCIA Power Switch
- *
- * The C2MON uses a TPS2211A PC-Card Power-Interface Switch to
- * control the voltages on the PCMCIA slot which is connected
- * to Port C (all outputs) and Port B (Over-Current Input)
- *-----------------------------------------------------------------------
- */
- /* Output pins */
-#define TPS2211_VCCD0 0x0002 /* PC.14 */
-#define TPS2211_VCCD1 0x0004 /* PC.13 */
-#define TPS2211_VPPD0 0x0008 /* PC.12 */
-#define TPS2211_VPPD1 0x0010 /* PC.11 */
-#define TPS2211_OUTPUTS ( TPS2211_VCCD0 | TPS2211_VCCD1 | \
- TPS2211_VPPD0 | TPS2211_VPPD1 )
-
- /* Input pins */
-#define TPS2211_OC 0x00000200 /* PB.22: Over-Current */
-#define TPS2211_INPUTS ( TPS2211_OC )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
-
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
- OR_SCY_5_CLK | OR_EHTR)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
-
-#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
-#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
-#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
-
-/*
- * BR2/3 and OR2/3 (SDRAM)
- *
- */
-#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
-
-#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-#ifndef CONFIG_CAN_DRIVER
-#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM
-#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define CONFIG_SYS_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
-#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
-#define CONFIG_SYS_OR3_CAN (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CONFIG_SYS_BR3_CAN ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
- BR_PS_8 | BR_MS_UPMB | BR_V )
-#endif /* CONFIG_CAN_DRIVER */
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#endif /* __CONFIG_H */
/* Room required on the stack for the environment data */
#define CONFIG_ENV_SIZE FLASH_MAX_SECTOR_SIZE
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
+
/*
* Amount of flash used for environment:
* We don't know which end has the small erase blocks so we use the penultimate
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
*/
/* **** PISMO SUPPORT *** */
-
/* Configure the PISMO */
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
-#endif
/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#define CONFIG_ENV_IS_IN_NAND
-#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
-
#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
--- /dev/null
+/*
+ * Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tegra20-common.h"
+
+/* Enable FDT support */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra20-colibri_t20_iris
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT "Tegra20 (Colibri) # "
+#define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T20 on Iris"
+
+/* Board-specific serial config */
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_TEGRA_UARTA_SDIO1
+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* SD/MMC support */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* File system support */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+/* USB host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+
+/* NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_TEGRA_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+
+/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET (SZ_2M)
+#undef CONFIG_ENV_SIZE /* undef size from tegra20-common.h */
+#define CONFIG_ENV_SIZE (SZ_64K)
+
+/* Debug commands */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CACHE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
#undef CONFIG_WATCHDOG
#undef CONFIG_HW_WATCHDOG
+/* SATA AHCI storage */
+
+#define CONFIG_SCSI_AHCI
+
+#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_SYS_64BIT_LBA
+#define CONFIG_SATA_INTEL 1
+#define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \
+ PCI_DEVICE_ID_INTEL_NM10_AHCI}, \
+ {PCI_VENDOR_ID_INTEL, \
+ PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_MOBILE}, \
+ {PCI_VENDOR_ID_INTEL, \
+ PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_SERIES6}, \
+ {PCI_VENDOR_ID_INTEL, \
+ PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+#endif
+
/*-----------------------------------------------------------------------
* Real Time Clock Configuration
*/
#define CONFIG_MAC_PARTITION
#define CONFIG_ISO_PARTITION /* Experimental */
+#define CONFIG_CMD_CBFS
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
/*-----------------------------------------------------------------------
* Video Configuration
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
-#define CONFIG_SYS_SRIO
-#define CONFIG_SRIO1 /* SRIO port 1 */
-#define CONFIG_SRIO2 /* SRIO port 2 */
-
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_ENV_OVERWRITE
"dhcp ${loadaddr}; " \
"run netargs; " \
"bootm ${loadaddr}\0" \
- "autoboot=if mmc rescan ${mmcdev}; then " \
+ "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
#define MACH_TYPE_EB_CPUX9K2 1977
#define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2
+
+#define CONFIG_SYS_CACHELINE_SIZE 32
+#define CONFIG_SYS_DCACHE_OFF
+
/*--------------------------------------------------------------------------*/
#ifndef CONFIG_RAMBOOT
#define CONFIG_SYS_TEXT_BASE 0x00000000
#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1
#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */
-
#define CONFIG_BOOT_RETRY_TIME 30
#define CONFIG_CMDLINE_EDITING
--- /dev/null
+/*
+ * Copyright (C) 2012 8D Technologies inc.
+ * Based on mt_ventoux.h, original banner below:
+ *
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tam3517-common.h"
+
+#undef CONFIG_USB_EHCI
+#undef CONFIG_USB_EHCI_OMAP
+#undef CONFIG_USB_OMAP3
+#undef CONFIG_CMD_USB
+
+/* Our console port is port3 */
+#undef CONFIG_CONS_INDEX
+#undef CONFIG_SYS_NS16550_COM1
+#undef CONFIG_SERIAL1
+
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
+#define CONFIG_SERIAL3
+
+#define MACH_TYPE_ECO5_PK 4017
+#define CONFIG_MACH_TYPE MACH_TYPE_ECO5_PK
+
+#define CONFIG_BOOTDELAY 10
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_AUTO_COMPLETE
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT "ECO5-PK # "
+#define CONFIG_SYS_PROMPT V_PROMPT
+
+/*
+ * Set its own mtdparts, different from common
+ */
+#undef MTDIDS_DEFAULT
+#undef MTDPARTS_DEFAULT
+#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(xloader-nand)," \
+ "1024k(uboot-nand),256k(params-nand)," \
+ "5120k(kernel),-(ubifs)"
+
+/*
+ * The arithmetic in tam3517.h is wrong for us and the kernel gets overwritten.
+ */
+#undef CONFIG_ENV_OFFSET_REDUND
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
+ CONFIG_SYS_ENV_SECT_SIZE)
+
+#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \
+ "install_kernel=if dhcp $bootfile; then nand erase kernel;" \
+ "nand write $fileaddr kernel; fi\0" \
+ "mtdparts="MTDPARTS_DEFAULT"\0" \
+ "serverip=192.168.142.60\0"
+
+
+#endif /* __CONFIG_H */
#define CONFIG_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
#define CONFIG_SYS_DCACHE_LINESZ 32
#define CONFIG_SYS_ICACHE_LINESZ 32
--- /dev/null
+/*
+ * iPAQ h2200 board configuration
+ *
+ * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define MACH_TYPE_H2200 341
+#define CONFIG_MACH_TYPE MACH_TYPE_H2200
+
+#define CONFIG_CPU_PXA25X 1
+#define CONFIG_BOARD_H2200
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE
+
+#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
+
+#define CONFIG_ENV_SIZE 0x00040000
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
+
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
+
+/*
+ * iPAQ 1st stage bootloader loads 2nd stage bootloader
+ * at address 0xa0040000 but bootloader requires header
+ * which is 0x1000 long.
+ *
+ * --- Header begin ---
+ * .word 0xea0003fe ; b 0x1000
+ *
+ * .org 0x40
+ * .ascii "ECEC"
+ *
+ * .org 0x1000
+ * --- Header end ---
+ */
+
+#define CONFIG_SYS_TEXT_BASE 0xa0041000
+
+/*
+ * Static chips
+ */
+
+#define CONFIG_SYS_MSC0_VAL 0x246c7ffc
+#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0
+#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+
+#define CONFIG_SYS_MECR_VAL 0x00000000
+#define CONFIG_SYS_MCMEM0_VAL 0x00000000
+#define CONFIG_SYS_MCMEM1_VAL 0x00000000
+#define CONFIG_SYS_MCATT0_VAL 0x00000000
+#define CONFIG_SYS_MCATT1_VAL 0x00000000
+#define CONFIG_SYS_MCIO0_VAL 0x00000000
+#define CONFIG_SYS_MCIO1_VAL 0x00000000
+
+#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
+#define CONFIG_SYS_SXCNFG_VAL 0x00040004
+
+#define CONFIG_SYS_MDREFR_VAL 0x0099E018
+#define CONFIG_SYS_MDCNFG_VAL 0x01C801CB
+#define CONFIG_SYS_MDMRS_VAL 0x00220022
+
+#define CONFIG_SYS_PSSR_VAL 0x00000000
+#define CONFIG_SYS_CKEN 0x00004840
+#define CONFIG_SYS_CCCR 0x00000161
+
+/*
+ * GPIOs
+ */
+
+#define CONFIG_SYS_GPSR0_VAL 0x01000000
+#define CONFIG_SYS_GPSR1_VAL 0x00000000
+#define CONFIG_SYS_GPSR2_VAL 0x00010000
+
+#define CONFIG_SYS_GPCR0_VAL 0x00000000
+#define CONFIG_SYS_GPCR1_VAL 0x00000000
+#define CONFIG_SYS_GPCR2_VAL 0x00000000
+
+#define CONFIG_SYS_GPDR0_VAL 0xF7E38C00
+#define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83
+#define CONFIG_SYS_GPDR2_VAL 0x000157FF
+
+#define CONFIG_SYS_GAFR0_L_VAL 0x80401000
+#define CONFIG_SYS_GAFR0_U_VAL 0x00000112
+#define CONFIG_SYS_GAFR1_L_VAL 0x600A9550
+#define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA
+#define CONFIG_SYS_GAFR2_L_VAL 0x20000000
+#define CONFIG_SYS_GAFR2_U_VAL 0x00000000
+
+/*
+ * Serial port
+ */
+
+#define CONFIG_PXA_SERIAL
+#define CONFIG_FFUART
+#define CONFIG_CONS_INDEX 3
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 }
+
+#define CONFIG_CMD_IMPORTENV 1
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_IMI
+
+#define CONFIG_FIT
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT "> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "$ "
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
+
+#endif /* __CONFIG_H */
#define CONFIG_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
#define CONFIG_SYS_DCACHE_LINESZ 32
#define CONFIG_SYS_ICACHE_LINESZ 32
#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sector size */
/* USB Host support */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
"if run loadbootenv; then " \
"run importbootenv;" \
--- /dev/null
+/*
+ * Copyright (C) 2012 Keymile AG
+ * Gerlando Falauto <gerlando.falauto@keymile.com>
+ *
+ * Based on km8321-common.h, see respective copyright notice for credits
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_KM8309_COMMON_H
+#define __CONFIG_KM8309_COMMON_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 family */
+#define CONFIG_QE 1 /* Has QE */
+#define CONFIG_MPC83xx 1 /* MPC83xx family */
+#define CONFIG_MPC830x 1 /* MPC830x family */
+#define CONFIG_MPC8309 1 /* MPC8309 CPU specific */
+
+#define CONFIG_KM_DEF_ARCH "arch=ppc_8xx\0"
+#define CONFIG_CMD_DIAG 1
+
+/* include common defines/options for all 83xx Keymile boards */
+#include "km83xx-common.h"
+
+/* QE microcode/firmware address */
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+/* at end of uboot partition, before env */
+#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xF00B0000
+
+#define CONFIG_MISC_INIT_R
+
+/*
+ * System IO Config
+ */
+/* 0x14000180 SICR_1 */
+#define CONFIG_SYS_SICRL (0 \
+ | SICR_1_UART1_UART1RTS \
+ | SICR_1_I2C_CKSTOP \
+ | SICR_1_IRQ_A_IRQ \
+ | SICR_1_IRQ_B_IRQ \
+ | SICR_1_GPIO_A_GPIO \
+ | SICR_1_GPIO_B_GPIO \
+ | SICR_1_GPIO_C_GPIO \
+ | SICR_1_GPIO_D_GPIO \
+ | SICR_1_GPIO_E_GPIO \
+ | SICR_1_GPIO_F_GPIO \
+ | SICR_1_USB_A_UART2S \
+ | SICR_1_USB_B_UART2RTS \
+ | SICR_1_FEC1_FEC1 \
+ | SICR_1_FEC2_FEC2 \
+ )
+
+/* 0x00080400 SICR_2 */
+#define CONFIG_SYS_SICRH (0 \
+ | SICR_2_FEC3_FEC3 \
+ | SICR_2_HDLC1_A_HDLC1 \
+ | SICR_2_ELBC_A_LA \
+ | SICR_2_ELBC_B_LCLK \
+ | SICR_2_HDLC2_A_HDLC2 \
+ | SICR_2_USB_D_GPIO \
+ | SICR_2_PCI_PCI \
+ | SICR_2_HDLC1_B_HDLC1 \
+ | SICR_2_HDLC1_C_HDLC1 \
+ | SICR_2_HDLC2_B_GPIO \
+ | SICR_2_HDLC2_C_HDLC2 \
+ | SICR_2_QUIESCE_B \
+ )
+
+/* GPR_1 */
+#define CONFIG_SYS_GPR1 0x50008060
+
+#define CONFIG_SYS_GP1DIR 0x00000000
+#define CONFIG_SYS_GP1ODR 0x00000000
+#define CONFIG_SYS_GP2DIR 0xFF000000
+#define CONFIG_SYS_GP2ODR 0x00000000
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CONFIG_SYS_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \
+ HRCWL_DDR_TO_SCB_CLK_2X1 | \
+ HRCWL_CSB_TO_CLKIN_2X1 | \
+ HRCWL_CORE_TO_CSB_2X1 | \
+ HRCWL_CE_PLL_VCO_DIV_2 | \
+ HRCWL_CE_TO_PLL_1X3)
+
+#define CONFIG_SYS_HRCW_HIGH (\
+ HRCWH_PCI_AGENT | \
+ HRCWH_PCI_ARBITER_DISABLE | \
+ HRCWH_CORE_ENABLE | \
+ HRCWH_FROM_0X00000100 | \
+ HRCWH_BOOTSEQ_DISABLE | \
+ HRCWH_SW_WATCHDOG_DISABLE | \
+ HRCWH_ROM_LOC_LOCAL_16BIT | \
+ HRCWH_BIG_ENDIAN | \
+ HRCWH_LALE_NORMAL)
+
+#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f
+#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
+ SDRAM_CFG_32_BE | \
+ SDRAM_CFG_SREN | \
+ SDRAM_CFG_HSE)
+
+#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000
+#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+ (0x200 << SDRAM_INTERVAL_REFINT_SHIFT))
+
+#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \
+ CSCONFIG_ODT_RD_NEVER | \
+ CSCONFIG_ODT_WR_ONLY_CURRENT | \
+ CSCONFIG_ROW_BIT_13 | \
+ CSCONFIG_COL_BIT_10)
+
+#define CONFIG_SYS_DDR_MODE 0x47860242
+#define CONFIG_SYS_DDR_MODE2 0x8080c000
+
+#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+ (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
+ (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
+ (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
+ (0 << TIMING_CFG0_WWT_SHIFT) | \
+ (0 << TIMING_CFG0_RRT_SHIFT) | \
+ (0 << TIMING_CFG0_WRT_SHIFT) | \
+ (0 << TIMING_CFG0_RWT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_40) | \
+ (2 << TIMING_CFG1_WRTORD_SHIFT) | \
+ (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+ (3 << TIMING_CFG1_WRREC_SHIFT) | \
+ (7 << TIMING_CFG1_REFREC_SHIFT) | \
+ (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
+ (7 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+ (3 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+ (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
+ (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
+ (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+ (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+ (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
+ (5 << TIMING_CFG2_CPO_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_3 0x00000000
+
+#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000
+#define CONFIG_SYS_KMBEC_FPGA_SIZE 128
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR_DBYP 0x80000000
+#define CONFIG_SYS_LCRR_EADC 0x00010000
+#define CONFIG_SYS_LCRR_CLKDIV 0x00000002
+
+#define CONFIG_SYS_LBC_LBCR 0x00000000
+
+/*
+ * MMU Setup
+ */
+#define CONFIG_SYS_IBAT7L (0)
+#define CONFIG_SYS_IBAT7U (0)
+#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
+
+#endif /* __CONFIG_KM8309_COMMON_H */
#define CONFIG_SYS_DDR_TIMING_3 0x00000000
#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000
-#define CONFIG_SYS_KMBEC_FPGA_SIZE 128
+#define CONFIG_SYS_KMBEC_FPGA_SIZE 128
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define UEC_VERBOSE_DEBUG 1
#ifdef CONFIG_UEC_ETH1
+#if defined(CONFIG_MPC8309)
+#define CONFIG_SYS_UEC1_UCC_NUM 2 /* UCC3 */
+#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
+#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12
+#else
#define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */
#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17
+#endif
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
/* I2C */
#define CONFIG_CMD_I2C
#define CONFIG_SH_I2C 1
+#define CONFIG_SH_I2C_8BIT
#define CONFIG_HARD_I2C
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS (2)
+#define CONFIG_SYS_MAX_I2C_BUS (5)
#define CONFIG_SYS_I2C_MODULE
#define CONFIG_SYS_I2C_SPEED (100000) /* 100 kHz */
#define CONFIG_SYS_I2C_SLAVE (0x7F)
#define CONFIG_SH_I2C_DATA_HIGH (4)
#define CONFIG_SH_I2C_DATA_LOW (5)
-#define CONFIG_SH_I2C_CLOCK (41666666)
+#define CONFIG_SH_I2C_CLOCK (104000000) /* 104 MHz */
#define CONFIG_SH_I2C_BASE0 (0xE6820000)
#define CONFIG_SH_I2C_BASE1 (0xE6822000)
+#define CONFIG_SH_I2C_BASE2 (0xE6824000)
+#define CONFIG_SH_I2C_BASE3 (0xE6826000)
+#define CONFIG_SH_I2C_BASE4 (0xE6828000)
#endif /* __KZM9G_H */
#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
#ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_PXA_MMC_GENERIC
#define CONFIG_CMD_MMC
#define CONFIG_SYS_MMC_BASE 0xF0000000
#endif
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
-#define CONFIG_MMC_BOUNCE_BUFFER
+#define CONFIG_BOUNCE_BUFFER
#define CONFIG_GENERIC_MMC
#define CONFIG_MXS_MMC
#endif
#define CONFIG_USB_ULPI
#define CONFIG_USB_ULPI_VIEWPORT_OMAP
/*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 154
-#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 152
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 57
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
/* commands to include */
#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */
/* Environment information */
-#define CONFIG_BOOTDELAY 10
+#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTFILE "uImage"
"run nandargs; " \
"ubi part nand0,4;" \
"ubi readvol ${loadaddr} kernel;" \
- "run addip addtty addmtd addfb addeth addmisc;" \
+ "run addtty addmtd addfb addeth addmisc;" \
"bootm ${loadaddr}\0" \
- "swupdate_args=setenv bootargs ubi.mtd=6 root=ubi0:fs_recovery "\
- "rootfstype=ubifs quiet loglevel=1 " \
- "consoleblank=0 ${swupdate_misc}\0" \
+ "preboot=ubi part nand0,7;" \
+ "ubi readvol ${loadaddr} splash;" \
+ "bmp display ${loadaddr};" \
+ "gpio set 55\0" \
+ "swupdate_args=setenv bootargs root=/dev/ram " \
+ "quiet loglevel=1 " \
+ "consoleblank=0 ${swupdate_misc}\0" \
"swupdate=echo Running Sw-Update...;" \
"if printenv mtdparts;then echo Starting SwUpdate...; " \
"else mtdparts default;fi; " \
"ubi part nand0,5;" \
"ubi readvol 0x82000000 kernel_recovery;" \
+ "ubi part nand0,6;" \
+ "ubi readvol 0x84000000 fs_recovery;" \
"run swupdate_args; " \
"setenv bootargs ${bootargs} " \
"${mtdparts} " \
"vram=6M omapfb.vram=1:2M,2:2M,3:2M " \
"omapdss.def_disp=lcd;" \
- "bootm ${loadaddr}\0"
+ "bootm 0x82000000 0x84000000\0"
#define CONFIG_BOOTCOMMAND \
"run nandboot"
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
/* address */
+#define CONFIG_PREBOOT
/*
* AM3517 has 12 GP timers, they can be driven by the system clock
#define CONFIG_NET_RETRY_COUNT 10
#endif
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_CMD_BMP
+#define CONFIG_VIDEO_OMAP3
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
#endif /* __CONFIG_H */
# undef CONFIG_DCACHE
#endif
+#ifndef XILINX_DCACHE_BYTE_SIZE
+#define XILINX_DCACHE_BYTE_SIZE 32768
+#endif
+
/*
* BOOTP options
*/
#define CONFIG_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
#if defined(CONFIG_LCD)
#define CONFIG_CMD_BMP
*/
#define CONFIG_E300 1 /* E300 family */
#define CONFIG_MPC83xx 1 /* MPC83xx family */
+#define CONFIG_MPC830x 1 /* MPC830x family */
#define CONFIG_MPC8308 1 /* MPC8308 CPU specific */
#define CONFIG_MPC8308_P1M 1 /* mpc8308_p1m board specific */
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC_BOUNCE_BUFFER
+#define CONFIG_BOUNCE_BUFFER
#define CONFIG_MXS_MMC
#endif
"dhcp ${uimage}; bootm\0"
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"dhcp ${uimage}; bootm\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"dhcp ${uimage}; bootm\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"dhcp ${uimage}; bootm\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"dhcp ${uimage}; bootm\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"dhcp ${uimage}; bootm\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev};" \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev};" \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
--- /dev/null
+/*
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2010
+ * Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * Derived from Beagle Board code:
+ * (C) Copyright 2006-2008
+ * Texas Instruments.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * Configuration settings for the Nokia RX-51 aka N900.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+
+#define CONFIG_OMAP /* in a TI OMAP core */
+#define CONFIG_OMAP34XX /* which is a 34XX */
+#define CONFIG_OMAP3430 /* which is in a 3430 */
+#define CONFIG_OMAP3_RX51 /* working with RX51 */
+#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
+
+#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
+
+/*
+ * Nokia X-Loader loading secondary image to address 0x80400000
+ * NOLO loading boot image to random place, so it doesn't really
+ * matter what we set this to. We have to copy u-boot to this address
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+
+#define CONFIG_SDRC /* The chip has SDRC controller */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <asm/arch/omap3.h>
+#include <asm/arch/mem.h>
+#include <linux/stringify.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Clock Defines */
+#define V_OSCK 26000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ /* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
+
+#define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */
+#define CONFIG_INITRD_TAG /* enable passing initrd */
+#define CONFIG_REVISION_TAG /* enable passing revision tag*/
+#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE (128 << 10)
+#define CONFIG_UBI_SIZE (512 << 10)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
+ (128 << 10))
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
+#define CONFIG_SERIAL3 3 /* UART3 on RX-51 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
+
+/* USB */
+#define CONFIG_MUSB_UDC
+#define CONFIG_MUSB_HDC
+#define CONFIG_USB_OMAP3
+#define CONFIG_TWL4030_USB
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE
+#define CONFIG_USBD_VENDORID 0x0421
+#define CONFIG_USBD_PRODUCTID 0x01c8
+#define CONFIG_USBD_MANUFACTURER "Nokia"
+#define CONFIG_USBD_PRODUCT_NAME "N900"
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_NO_FLASH
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_EXT4 /* EXT4 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_GPIO /* Enable gpio command */
+
+#define CONFIG_CMDLINE_EDITING /* add command line history */
+#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
+
+#define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */
+
+#ifdef ONENAND_SUPPORT
+
+#define CONFIG_CMD_ONENAND /* ONENAND support */
+#define CONFIG_CMD_MTDPARTS /* mtd parts support */
+
+#ifdef UBIFS_SUPPORT
+#define CONFIG_CMD_UBI /* UBI Support */
+#define CONFIG_CMD_UBIFS /* UBIFS Support */
+#endif
+
+#endif
+
+/* commands not needed from config_cmd_default.h */
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_IMI /* iminfo */
+#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#undef CONFIG_CMD_NFS /* NFS support */
+#undef CONFIG_CMD_SAVEENV /* saveenv */
+#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+
+#define CONFIG_OMAP3_SPI
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 1
+#define CONFIG_DRIVER_OMAP34XX_I2C
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER
+#define CONFIG_TWL4030_LED
+#define CONFIG_TWL4030_KEYPAD
+
+#define CONFIG_OMAP_GPIO
+#define GPIO_SLIDE 71
+
+/*
+ * Board ONENAND Info.
+ */
+
+#define PART1_NAME "bootloader"
+#define PART1_SIZE 128
+#define PART1_MULL 1024
+#define PART1_SUFF "k"
+#define PART1_OFFS 0x00000000
+#define PART1_MASK 0x00000003
+
+#define PART2_NAME "config"
+#define PART2_SIZE 384
+#define PART2_MULL 1024
+#define PART2_SUFF "k"
+#define PART2_OFFS 0x00020000
+#define PART2_MASK 0x00000000
+
+#define PART3_NAME "log"
+#define PART3_SIZE 256
+#define PART3_MULL 1024
+#define PART3_SUFF "k"
+#define PART3_OFFS 0x00080000
+#define PART3_MASK 0x00000000
+
+#define PART4_NAME "kernel"
+#define PART4_SIZE 2
+#define PART4_MULL 1024*1024
+#define PART4_SUFF "m"
+#define PART4_OFFS 0x000c0000
+#define PART4_MASK 0x00000000
+
+#define PART5_NAME "initfs"
+#define PART5_SIZE 2
+#define PART5_MULL 1024*1024
+#define PART5_SUFF "m"
+#define PART5_OFFS 0x002c0000
+#define PART5_MASK 0x00000000
+
+#define PART6_NAME "rootfs"
+#define PART6_SIZE 257280
+#define PART6_MULL 1024
+#define PART6_SUFF "k"
+#define PART6_OFFS 0x004c0000
+#define PART6_MASK 0x00000000
+
+#ifdef ONENAND_SUPPORT
+
+#define PISMO1_NAND_SIZE GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
+#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+#ifdef UBIFS_SUPPORT
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#endif
+
+#define MTDIDS_DEFAULT "onenand0=onenand"
+#define MTDPARTS_DEFAULT "mtdparts=onenand:" \
+ __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \
+ __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \
+ __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \
+ __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \
+ __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \
+ "-(" PART6_NAME ")"
+
+#endif
+
+/* Watchdog support */
+#define CONFIG_HW_WATCHDOG
+
+/*
+ * Framebuffer
+ */
+/* Video console */
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */
+#define CONFIG_VIDEO_LOGO
+#define VIDEO_FB_16BPP_PIXEL_SWAP
+#define VIDEO_FB_16BPP_WORD_SWAP
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+
+/* functions for cfb_console */
+#define VIDEO_KBD_INIT_FCT rx51_kp_init()
+#define VIDEO_TSTC_FCT rx51_kp_tstc
+#define VIDEO_GETC_FCT rx51_kp_getc
+#ifndef __ASSEMBLY__
+int rx51_kp_init(void);
+int rx51_kp_tstc(void);
+int rx51_kp_getc(void);
+#endif
+
+#ifndef MTDPARTS_DEFAULT
+#define MTDPARTS_DEFAULT
+#endif
+
+/* Environment information */
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "usbtty=cdc_acm\0" \
+ "stdin=vga\0" \
+ "stdout=vga\0" \
+ "stderr=vga\0" \
+ "setcon=setenv stdin ${con};" \
+ "setenv stdout ${con};" \
+ "setenv stderr ${con}\0" \
+ "sercon=setenv con serial; run setcon\0" \
+ "usbcon=setenv con usbtty; run setcon\0" \
+ "vgacon=setenv con vga; run setcon\0" \
+ "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
+ "switchmmc=mmc dev ${mmcnum}\0" \
+ "kernaddr=0x82008000\0" \
+ "initrdaddr=0x84008000\0" \
+ "scriptaddr=0x86008000\0" \
+ "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
+ "${loadaddr} ${mmcfile}\0" \
+ "kernload=setenv loadaddr ${kernaddr};" \
+ "setenv mmcfile ${mmckernfile};" \
+ "run fileload\0" \
+ "initrdload=setenv loadaddr ${initrdaddr};" \
+ "setenv mmcfile ${mmcinitrdfile};" \
+ "run fileload\0" \
+ "scriptload=setenv loadaddr ${scriptaddr};" \
+ "setenv mmcfile ${mmcscriptfile};" \
+ "run fileload\0" \
+ "scriptboot=echo Running ${mmcscriptfile} from mmc " \
+ "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
+ "kernboot=echo Booting ${mmckernfile} from mmc " \
+ "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
+ "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
+ "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
+ "attachboot=echo Booting attached kernel image ...;" \
+ "setenv setup_omap_atag 1;" \
+ "bootm ${attkernaddr};" \
+ "setenv setup_omap_atag\0" \
+ "trymmcscriptboot=if run switchmmc; then " \
+ "if run scriptload; then " \
+ "run scriptboot;" \
+ "fi;" \
+ "fi\0" \
+ "trymmckernboot=if run switchmmc; then " \
+ "if run kernload; then " \
+ "run kernboot;" \
+ "fi;" \
+ "fi\0" \
+ "trymmckerninitrdboot=if run switchmmc; then " \
+ "if run initrdload; then " \
+ "if run kernload; then " \
+ "run kerninitrdboot;" \
+ "fi;" \
+ "fi; " \
+ "fi\0" \
+ "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
+ "setenv mmckernfile uImage; run trymmckernboot\0" \
+ "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
+ "setenv mmcpart 2; run trymmcpartboot;" \
+ "setenv mmcpart 3; run trymmcpartboot;" \
+ "setenv mmcpart 4; run trymmcpartboot\0" \
+ "trymmcboot=if run switchmmc; then " \
+ "setenv mmctype fat;" \
+ "run trymmcallpartboot;" \
+ "setenv mmctype ext2;" \
+ "run trymmcallpartboot;" \
+ "setenv mmctype ext4;" \
+ "run trymmcallpartboot;" \
+ "fi\0" \
+ "emmcboot=setenv mmcnum 1; run trymmcboot\0" \
+ "sdboot=setenv mmcnum 0; run trymmcboot\0" \
+ ""
+
+#define CONFIG_PREBOOT \
+ "if run slide; then true; else run attachboot; fi;" \
+ "echo Extra commands:;" \
+ "echo run sercon - Use serial port for control.;" \
+ "echo run usbcon - Use usbtty for control.;" \
+ "echo run vgacon - Use framebuffer/keyboard.;" \
+ "echo run sdboot - Boot from SD card slot.;" \
+ "echo run emmcboot - Boot internal eMMC memory.;" \
+ "echo run attachboot - Boot attached kernel image.;" \
+ "echo"
+
+#define CONFIG_BOOTCOMMAND \
+ "run sdboot;" \
+ "run emmcboot;" \
+ "run attachboot;" \
+ "echo"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "Nokia RX-51 # "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
+#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
+
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 2
+#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
+
+/*
+ * FLASH and environment organization
+ */
+
+#define CONFIG_ENV_IS_NOWHERE
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+
+/*
+ * Attached kernel image
+ */
+
+#define SDRAM_SIZE 0x10000000 /* 256 MB */
+#define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
+
+#define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */
+#define KERNEL_OFFSET 0x40000 /* 256 kB */
+#define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET)
+#define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE)
+
+/* Reserve protected RAM for attached kernel */
+#define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1)
+
+#endif /* __CONFIG_H */
"userbutton_nonxm=gpio input 7;\0"
/* "run userbutton" will return 1 (false) if is pressed and 0 (false) if not */
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run userbutton; then " \
"setenv bootenv uEnv.txt;" \
"else " \
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"mtdids=" MTDIDS_DEFAULT "\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"mmcdev=0\0" \
- "autoboot=if mmc rescan ${mmcdev}; then " \
+ "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan ${mmcdev}; then " \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_PXA_MMC_GENERIC
#define CONFIG_SYS_MMC_BASE 0xF0000000
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#define RTC 1 /* enable 32KHz osc */
#ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_PXA_MMC_GENERIC
#define CONFIG_CMD_MMC
#define CONFIG_SYS_MMC_BASE 0xF0000000
#endif
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
-#define CONFIG_QEMU_MIPS 1
+#define CONFIG_MIPS32 /* MIPS32 CPU core */
+#define CONFIG_QEMU_MIPS
#define CONFIG_MISC_INIT_R
-/*IP address is default used by Qemu*/
-#define CONFIG_IPADDR 10.0.2.15 /* Our IP address */
-#define CONFIG_SERVERIP 10.0.2.2 /* Server IP address */
-
#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
#define CONFIG_BAUDRATE 115200
#define CONFIG_CMD_DHCP
#define CONFIG_DRIVER_NE2000
-#define CONFIG_DRIVER_NE2000_BASE (0xb4000300)
+#define CONFIG_DRIVER_NE2000_BASE 0xb4000300
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK 115200
-#define CONFIG_SYS_NS16550_COM1 (0xb40003f8)
-#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_COM1 0xb40003f8
+#define CONFIG_CONS_INDEX 1
#define CONFIG_CMD_IDE
#define CONFIG_DOS_PARTITION
#define CONFIG_SYS_IDE_MAXBUS 2
-#define CONFIG_SYS_ATA_IDE0_OFFSET (0x1f0)
-#define CONFIG_SYS_ATA_IDE1_OFFSET (0x170)
-#define CONFIG_SYS_ATA_DATA_OFFSET (0)
-#define CONFIG_SYS_ATA_REG_OFFSET (0)
-#define CONFIG_SYS_ATA_BASE_ADDR (0xb4000000)
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
+#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
+#define CONFIG_SYS_ATA_DATA_OFFSET 0
+#define CONFIG_SYS_ATA_REG_OFFSET 0
+#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000
-#define CONFIG_SYS_IDE_MAXDEVICE (4)
+#define CONFIG_SYS_IDE_MAXDEVICE 4
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
/* Monitor Command Prompt */
#if defined(CONFIG_SYS_LITTLE_ENDIAN)
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN 128*1024
#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
+/* Cached addr */
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x81000000
#define CONFIG_SYS_MEMTEST_START 0x80100000
#define CONFIG_SYS_MEMTEST_END 0x80800000
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
-
/* The following #defines are needed to get flash environment right */
+#define CONFIG_SYS_TEXT_BASE 0xbfc00000 /* Rom version */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10)
#define CONFIG_SYS_FLASH_BASE 0xbfc00000
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 128
-#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
/* Address and size of Primary Environment Sector */
#define MEM_SIZE 128
-#undef CONFIG_MEMSIZE_IN_BYTES
-
#define CONFIG_LZMA
/*-----------------------------------------------------------------------
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains the configuration parameters for qemu-mips64 target.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MIPS64 /* MIPS64 CPU core */
+#define CONFIG_QEMU_MIPS
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "addmisc=setenv bootargs ${bootargs} " \
+ "console=ttyS0,${baudrate} " \
+ "panic=1\0" \
+ "bootfile=/tftpboot/vmlinux\0" \
+ "load=tftp ffffffff80500000 ${u-boot}\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "bootp;bootelf"
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+#define CONFIG_CMD_DHCP
+
+#define CONFIG_DRIVER_NE2000
+#define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK 115200
+#define CONFIG_SYS_NS16550_COM1 0xffffffffb40003f8
+#define CONFIG_CONS_INDEX 1
+
+#define CONFIG_CMD_IDE
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_SYS_IDE_MAXBUS 2
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
+#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
+#define CONFIG_SYS_ATA_DATA_OFFSET 0
+#define CONFIG_SYS_ATA_REG_OFFSET 0
+#define CONFIG_SYS_ATA_BASE_ADDR 0xffffffffb4000000
+
+#define CONFIG_SYS_IDE_MAXDEVICE 4
+
+#define CONFIG_CMD_RARP
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+
+/* Monitor Command Prompt */
+#if defined(CONFIG_SYS_LITTLE_ENDIAN)
+#define CONFIG_SYS_PROMPT "qemu-mips64el # "
+#else
+#define CONFIG_SYS_PROMPT "qemu-mips64 # "
+#endif
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_HUSH_PARSER
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 16
+
+#define CONFIG_SYS_MALLOC_LEN 128*1024
+
+#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
+
+#define CONFIG_SYS_MHZ 132
+
+#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
+
+#define CONFIG_SYS_HZ 1000
+
+/* Cached addr */
+#define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000
+
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0xffffffff81000000
+
+#define CONFIG_SYS_MEMTEST_START 0xffffffff80100000
+#define CONFIG_SYS_MEMTEST_END 0xffffffff80800000
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+/* The following #defines are needed to get flash environment right */
+#define CONFIG_SYS_TEXT_BASE 0xffffffffbfc00000 /* Rom version */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (192 << 10)
+
+#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
+
+/* We boot from this flash, selected with dip switch */
+#define CONFIG_SYS_FLASH_BASE 0xffffffffbfc00000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 128
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
+
+/* Address and size of Primary Environment Sector */
+#define CONFIG_ENV_SIZE 0x8000
+
+#define CONFIG_ENV_OVERWRITE 1
+
+#define MEM_SIZE 128
+
+#define CONFIG_LZMA
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CONFIG_SYS_DCACHE_SIZE 16384
+#define CONFIG_SYS_ICACHE_SIZE 16384
+#define CONFIG_SYS_CACHELINE_SIZE 32
+
+#endif /* __CONFIG_H */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+++ /dev/null
-/*
- * (C) Copyright 2002,2003 Motorola,Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
- * Added support for Wind River SBC8560 board
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * sbc8560 board configuration file.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Top level Makefile configuration choices
- */
-#ifdef CONFIG_66
-#define CONFIG_PCI_66
-#endif
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_BOOKE 1 /* BOOKE */
-#define CONFIG_E500 1 /* BOOKE e500 family */
-#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
-#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */
-
-#define CONFIG_SYS_TEXT_BASE 0xfffc0000
-
-
-#define CONFIG_CPM2 1 /* has CPM2 */
-#define CONFIG_SBC8560 1 /* configuration for SBC8560 board */
-#define CONFIG_MPC8560 1
-
-/* XXX flagging this as something I might want to delete */
-#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */
-
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
-#undef CONFIG_PCI /* pci ethernet support */
-#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
-
-#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
-
-#define CONFIG_ENV_OVERWRITE
-
-/* Using Localbus SDRAM to emulate flash before we can program the flash,
- * normally you need a flash-boot image(u-boot.bin), if so undef this.
- */
-#undef CONFIG_RAM_AS_FLASH
-
-#if defined(CONFIG_PCI_66) /* some PCI card is 33Mhz only */
- #define CONFIG_SYS_CLK_FREQ 66000000/* sysclk for MPC85xx */
-#else
- #define CONFIG_SYS_CLK_FREQ 33000000/* most pci cards are 33Mhz */
-#endif
-
-/* below can be toggled for performance analysis. otherwise use default */
-#define CONFIG_L2_CACHE /* toggle L2 cache */
-#undef CONFIG_BTB /* toggle branch predition */
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
-
-#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
-#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
-#define CONFIG_SYS_MEMTEST_END 0x00400000
-
-#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
- defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
- defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
-#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
-#endif
-
-#define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */
-
-/* DDR Setup */
-#define CONFIG_FSL_DDR1
-#undef CONFIG_FSL_DDR_INTERACTIVE
-#undef CONFIG_DDR_ECC /* only for ECC DDR module */
-#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
-#undef CONFIG_DDR_SPD
-
-#if defined(CONFIG_MPC85xx_REV1)
-#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */
-#endif
-
-#undef CONFIG_DDR_ECC /* only for ECC DDR module */
-#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
-#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
-
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_NUM_DDR_CONTROLLERS 1
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL 2
-
-/* I2C addresses of SPD EEPROMs */
-#define SPD_EEPROM_ADDRESS 0x55 /* CTLR 0 DIMM 0 */
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-#if defined(CONFIG_RAM_AS_FLASH)
- #define CONFIG_SYS_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */
- #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH 8M */
- #define CONFIG_SYS_BR0_PRELIM 0xf8000801 /* port size 8bit */
- #define CONFIG_SYS_OR0_PRELIM 0xf8000ff7 /* 8MB Flash */
-#else /* Boot from real Flash */
- #define CONFIG_SYS_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */
- #define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of FLASH 8M */
- #define CONFIG_SYS_BR0_PRELIM 0xff800801 /* port size 8bit */
- #define CONFIG_SYS_OR0_PRELIM 0xff800ff7 /* 8MB Flash */
-#endif
-#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
-
-/* local bus definitions */
-#define CONFIG_SYS_BR1_PRELIM 0xe4001801 /* 64M, 32-bit flash */
-#define CONFIG_SYS_OR1_PRELIM 0xfc000ff7
-
-#define CONFIG_SYS_BR2_PRELIM 0x00000000 /* CS2 not used */
-#define CONFIG_SYS_OR2_PRELIM 0x00000000
-
-#define CONFIG_SYS_BR3_PRELIM 0xf0001861 /* 64MB localbus SDRAM */
-#define CONFIG_SYS_OR3_PRELIM 0xfc000cc1
-
-#if defined(CONFIG_RAM_AS_FLASH)
- #define CONFIG_SYS_BR4_PRELIM 0xf4001861 /* 64M localbus SDRAM */
-#else
- #define CONFIG_SYS_BR4_PRELIM 0xf8001861 /* 64M localbus SDRAM */
-#endif
-#define CONFIG_SYS_OR4_PRELIM 0xfc000cc1
-
-#define CONFIG_SYS_BR5_PRELIM 0xfc000801 /* 16M CS5 misc devices */
-#if 1
- #define CONFIG_SYS_OR5_PRELIM 0xff000ff7
-#else
- #define CONFIG_SYS_OR5_PRELIM 0xff0000f0
-#endif
-
-#define CONFIG_SYS_BR6_PRELIM 0xe0001801 /* 64M, 32-bit flash */
-#define CONFIG_SYS_OR6_PRELIM 0xfc000ff7
-#define CONFIG_SYS_LBC_LCRR 0x00030002 /* local bus freq */
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-#define CONFIG_SYS_LBC_LSRT 0x20000000
-#define CONFIG_SYS_LBC_MRTPR 0x20000000
-#define CONFIG_SYS_LBC_LSDMR_1 0x2861b723
-#define CONFIG_SYS_LBC_LSDMR_2 0x0861b723
-#define CONFIG_SYS_LBC_LSDMR_3 0x0861b723
-#define CONFIG_SYS_LBC_LSDMR_4 0x1861b723
-#define CONFIG_SYS_LBC_LSDMR_5 0x4061b723
-
-/* just hijack the MOT BCSR def for SBC8560 misc devices */
-#define CONFIG_SYS_BCSR ((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000)
-/* the size of CS5 needs to be >= 16M for TLB and LAW setups */
-
-#define CONFIG_SYS_INIT_RAM_LOCK 1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
-
-/* Serial Port */
-#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else */
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK 1843200 /* get_bus_freq(0) */
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CONFIG_SYS_NS16550_COM1 ((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00700000)
-#define CONFIG_SYS_NS16550_COM2 ((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00800000)
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP 1
-#define CONFIG_OF_STDOUT_VIA_ALIAS 1
-
-/*
- * I2C
- */
-#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C /* I2C with hardware support*/
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET 0x3000
-
-#define CONFIG_SYS_PCI_MEM_BASE 0xC0000000
-#define CONFIG_SYS_PCI_MEM_PHYS 0xC0000000
-#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000
-
-#ifdef CONFIG_TSEC_ENET
-
-#ifndef CONFIG_MII
-#define CONFIG_MII 1 /* MII PHY management */
-#endif
-#define CONFIG_TSEC1 1
-#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "TSEC1"
-#define TSEC1_PHY_ADDR 0x19
-#define TSEC2_PHY_ADDR 0x1a
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
-#define TSEC1_FLAGS TSEC_GIGABIT
-#define TSEC2_FLAGS TSEC_GIGABIT
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME "TSEC0"
-
-#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
-
- #undef CONFIG_ETHER_NONE /* define if ether on something else */
- #define CONFIG_ETHER_ON_FCC2 /* cpm FCC ethernet support */
- #define CONFIG_ETHER_INDEX 2 /* which channel for ether */
-
- #if (CONFIG_ETHER_INDEX == 2)
- /*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
- * - Select bus for bd/buffers
- * - Full duplex
- */
- #define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
- #define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
- #define CONFIG_SYS_CPMFCR_RAMTYPE 0
- #define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE)
-
- #elif (CONFIG_ETHER_INDEX == 3)
- /* need more definitions here for FE3 */
- #endif /* CONFIG_ETHER_INDEX */
-
- #define CONFIG_MII /* MII PHY management */
- #define CONFIG_BITBANGMII /* bit-bang MII PHY management */
- /*
- * GPIO pins used for bit-banged MII communications
- */
- #define MDIO_PORT 2 /* Port C */
- #define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
- (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
- #define MDC_DECLARE MDIO_DECLARE
-
- #define MDIO_ACTIVE (iop->pdir |= 0x00400000)
- #define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
- #define MDIO_READ ((iop->pdat & 0x00400000) != 0)
-
- #define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \
- else iop->pdat &= ~0x00400000
-
- #define MDC(bit) if(bit) iop->pdat |= 0x00200000; \
- else iop->pdat &= ~0x00200000
-
- #define MIIDELAY udelay(1)
-
-#endif
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#if 0
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CONFIG_SYS_FLASH_PROTECTION /* use hardware protection */
-#endif
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-
-#if 0
-/* XXX This doesn't work and I don't want to fix it */
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
- #define CONFIG_SYS_RAMBOOT
-#else
- #undef CONFIG_SYS_RAMBOOT
-#endif
-#endif
-
-/* Environment */
-#if !defined(CONFIG_SYS_RAMBOOT)
- #if defined(CONFIG_RAM_AS_FLASH)
- #define CONFIG_ENV_IS_NOWHERE
- #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x100000)
- #define CONFIG_ENV_SIZE 0x2000
- #else
- #define CONFIG_ENV_IS_IN_FLASH 1
- #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
- #define CONFIG_ENV_SIZE 0x2000 /* CONFIG_ENV_SECT_SIZE */
- #endif
-#else
- #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
- #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
- #define CONFIG_ENV_SIZE 0x2000
-#endif
-
-#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600"
-/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/
-#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
- #define CONFIG_CMD_PCI
-#endif
-
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
- #define CONFIG_CMD_MII
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
- #undef CONFIG_CMD_SAVEENV
- #undef CONFIG_CMD_LOADS
-#endif
-
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "SBC8560=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
- #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
- #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#endif
-
-/* You can compile in a MAC address and your custom net settings by using
- * the following syntax. Your board should be marked with the assigned
- * MAC addresses directly on it.
- *
- * #define CONFIG_ETHADDR de:ad:be:ef:00:00
- * #define CONFIG_ETH1ADDR fa:ke:ad:dr:es:s!
- * #define CONFIG_SERVERIP <server ip>
- * #define CONFIG_IPADDR <board ip>
- * #define CONFIG_GATEWAYIP <gateway ip>
- * #define CONFIG_NETMASK <your netmask>
- */
-
-#define CONFIG_HOSTNAME SBC8560
-#define CONFIG_ROOTPATH "/home/ppc"
-#define CONFIG_BOOTFILE "uImage"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "consoledev=ttyS0\0" \
- "ramdiskaddr=2000000\0" \
- "ramdiskfile=ramdisk.uboot\0" \
- "fdtaddr=c00000\0" \
- "fdtfile=sbc8560.dtb\0"
-
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
-
-#endif /* __CONFIG_H */
#define CONFIG_SYS_MMC_ENV_PART 2
/* USB Host support */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
#define CONFIG_USB_STORAGE
* USB support (currently only works with D-cache off)
************************************************************/
#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_S3C24XX
#define CONFIG_USB_KEYBOARD
#define CONFIG_USB_STORAGE
#define CONFIG_DOS_PARTITION
/*
* High Level Configuration Options
*/
-#define CONFIG_SUVD3 /* SUVD3 board specific */
-#define CONFIG_HOSTNAME suvd3
-#define CONFIG_KM_BOARD_NAME "suvd3"
+/* This needs to be set prior to including km/km83xx-common.h */
#define CONFIG_SYS_TEXT_BASE 0xF0000000
+#if defined(CONFIG_SUVD3) /* SUVD3 board specific */
+#define CONFIG_HOSTNAME suvd3
+#define CONFIG_KM_BOARD_NAME "suvd3"
/* include common defines/options for all 8321 Keymile boards */
#include "km/km8321-common.h"
+#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */
+#define CONFIG_HOSTNAME kmvect1
+#define CONFIG_KM_BOARD_NAME "kmvect1"
+/* include common defines/options for all 8309 Keymile boards */
+#include "km/km8309-common.h"
+#else
+#error Supported boards are: SUVD3, KMVECT1
+#endif
#define CONFIG_SYS_APP1_BASE 0xA0000000
-#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
+#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
#define CONFIG_SYS_APP2_BASE 0xB0000000
-#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */
+#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
+#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */
#define CONFIG_IDE_8xx_DIRECT 1 /* Direct IDE not supported */
#undef CONFIG_IDE_LED /* LED for ide not supported */
#undef CONFIG_IDE_RESET /* reset for ide not supported */
--- /dev/null
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Corenet DS style board configuration file
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#endif
+
+#define CONFIG_CMD_REGINFO
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE
+#define CONFIG_E6500
+#define CONFIG_E500 /* BOOKE e500 family */
+#define CONFIG_E500MC /* BOOKE e500mc family */
+#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
+#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */
+#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
+#define CONFIG_MP /* support multiple processors */
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0xeff80000
+#endif
+
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
+#endif
+
+#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
+#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS
+#define CONFIG_FSL_IFC /* Enable IFC Support */
+#define CONFIG_PCI /* Enable PCI/PCIE */
+#define CONFIG_PCIE1 /* PCIE controler 1 */
+#define CONFIG_PCIE2 /* PCIE controler 2 */
+#define CONFIG_PCIE3 /* PCIE controler 3 */
+#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
+
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1 /* SRIO port 1 */
+#define CONFIG_SRIO2 /* SRIO port 2 */
+
+#define CONFIG_FSL_LAW /* Use common FSL init code */
+
+#define CONFIG_ENV_OVERWRITE
+
+#ifdef CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_NOWHERE
+#else
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#endif
+
+#ifndef CONFIG_SYS_NO_FLASH
+#if defined(CONFIG_SPIFLASH)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 10000000
+#define CONFIG_ENV_SPI_MODE 0
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#elif defined(CONFIG_SDCARD)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_OFFSET (512 * 1097)
+#elif defined(CONFIG_NAND)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
+#endif
+#else /* CONFIG_SYS_NO_FLASH */
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
+#endif
+
+
+
+#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
+#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
+
+#ifndef __ASSEMBLY__
+unsigned long get_board_sys_clk(void);
+unsigned long get_board_ddr_clk(void);
+#endif
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_SYS_CACHE_STASHING
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_DDR_ECC
+#ifdef CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
+#endif
+
+#define CONFIG_ENABLE_36BIT_PHYS
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_ADDR_MAP
+#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
+#endif
+
+#if 0
+#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */
+#endif
+#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x00400000
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
+
+/*
+ * Config the L3 Cache as L3 SRAM
+ */
+#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_DCSRBAR 0xf0000000
+#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
+#endif
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM 0
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+
+/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
+#define CONFIG_DIMM_SLOTS_PER_CTLR 2
+#define CONFIG_CHIP_SELECTS_PER_CTRL 4
+#define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+
+#define CONFIG_DDR_SPD
+#define CONFIG_FSL_DDR3
+
+#define CONFIG_SYS_SPD_BUS_NUM 0
+#define SPD_EEPROM_ADDRESS1 0x51
+#define SPD_EEPROM_ADDRESS2 0x52
+#define SPD_EEPROM_ADDRESS3 0x53
+#define SPD_EEPROM_ADDRESS4 0x54
+#define SPD_EEPROM_ADDRESS5 0x55
+#define SPD_EEPROM_ADDRESS6 0x56
+#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */
+#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
+
+/*
+ * IFC Definitions
+ */
+#define CONFIG_SYS_FLASH_BASE 0xe0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
+#else
+#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
+#endif
+
+#define CONFIG_SYS_NOR0_CSPR_EXT (0xf)
+#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
+ + 0x8000000) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR1_CSPR_EXT (0xf)
+#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
+/* NOR Flash Timing Params */
+#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80
+
+#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) | \
+ FTIM0_NOR_TEADC(0x01) | \
+ FTIM0_NOR_TEAHC(0x20))
+#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
+ FTIM1_NOR_TRAD_NOR(0x1A) |\
+ FTIM1_NOR_TSEQRAD_NOR(0x13))
+#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x01) | \
+ FTIM2_NOR_TCH(0x0E) | \
+ FTIM2_NOR_TWPH(0x0E) | \
+ FTIM2_NOR_TWP(0x1c))
+#define CONFIG_SYS_NOR_FTIM3 0x0
+
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \
+ + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
+
+#define CONFIG_FSL_QIXIS /* use common QIXIS code */
+#define QIXIS_BASE 0xffdf0000
+#define QIXIS_LBMAP_SWITCH 6
+#define QIXIS_LBMAP_MASK 0x0f
+#define QIXIS_LBMAP_SHIFT 0
+#define QIXIS_LBMAP_DFLTBANK 0x00
+#define QIXIS_LBMAP_ALTBANK 0x04
+#define QIXIS_RST_CTL_RESET 0x83
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+#ifdef CONFIG_PHYS_64BIT
+#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE)
+#else
+#define QIXIS_BASE_PHYS QIXIS_BASE
+#endif
+
+#define CONFIG_SYS_CSPR3_EXT (0xf)
+#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_GPCM \
+ | CSPR_V)
+#define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024)
+#define CONFIG_SYS_CSOR3 0x0
+/* QIXIS Timing parameters for IFC CS3 */
+#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
+ FTIM0_GPCM_TEADC(0x0e) | \
+ FTIM0_GPCM_TEAHC(0x0e))
+#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
+ FTIM1_GPCM_TRAD(0x3f))
+#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
+ FTIM2_GPCM_TCH(0x0) | \
+ FTIM2_GPCM_TWP(0x1f))
+#define CONFIG_SYS_CS3_FTIM3 0x0
+
+/* NAND Flash on IFC */
+#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_NAND_BASE 0xff800000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE)
+#else
+#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
+#endif
+
+#define CONFIG_SYS_NAND_CSPR_EXT (0xf)
+#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
+ | CSPR_MSEL_NAND /* MSEL = NAND */ \
+ | CSPR_V)
+#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
+
+#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
+ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
+ | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
+ | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \
+ | CSOR_NAND_PGS_2K /* Page Size = 2K */ \
+ | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
+ | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* ONFI NAND Flash mode0 Timing Params */
+#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \
+ FTIM0_NAND_TWP(0x18) | \
+ FTIM0_NAND_TWCHT(0x07) | \
+ FTIM0_NAND_TWH(0x0a))
+#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
+ FTIM1_NAND_TWBE(0x39) | \
+ FTIM1_NAND_TRR(0x0e) | \
+ FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
+ FTIM2_NAND_TREH(0x0a) | \
+ FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3 0x0
+
+#define CONFIG_SYS_NAND_DDR_LAW 11
+
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+
+#if defined(CONFIG_NAND)
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
+#else
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
+#endif
+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+#if defined(CONFIG_RAMBOOT_PBL)
+#define CONFIG_SYS_RAMBOOT
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_HWCONFIG
+
+/* define to use L1 as initial stack */
+#define CONFIG_L1_INIT_RAM
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000
+/* The assembler doesn't like typecast */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
+ ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
+#else
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe0ec000 /* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
+#endif
+#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
+
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+
+/* Serial Port - controlled on board with jumper J8
+ * open - index 2
+ * shorted - index 1
+ */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
+#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
+#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+
+/* I2C */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x118000
+#define CONFIG_SYS_I2C2_OFFSET 0x118100
+#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */
+#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */
+
+/* VSC Crossbar switches */
+#define CONFIG_VSC_CROSSBAR
+#define I2C_MUX_CH_DEFAULT 0x8
+#define I2C_MUX_CH_VSC3316_FS 0xc
+#define I2C_MUX_CH_VSC3316_BS 0xd
+#define VSC3316_FSM_TX_ADDR 0x70
+#define VSC3316_FSM_RX_ADDR 0x71
+
+/*
+ * RapidIO
+ */
+#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull
+#else
+#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000
+#endif
+#define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */
+
+#define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull
+#else
+#define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000
+#endif
+#define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */
+
+/*
+ * for slave u-boot IMAGE instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
+/*
+ * for slave UCODE and ENV instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */
+
+/* slave core release by master*/
+#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
+#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
+
+/*
+ * SRIO_PCIE_BOOT - SLAVE
+ */
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
+ (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
+#endif
+/*
+ * eSPI - Enhanced SPI
+ */
+#define CONFIG_FSL_ESPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED 10000000
+#define CONFIG_SF_DEFAULT_MODE 0
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+
+/* controller 1, direct to uli, tgtid 3, Base address 20000 */
+#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
+#else
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
+#endif
+#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
+#else
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000
+#endif
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
+
+/* controller 2, Slot 2, tgtid 2, Base address 201000 */
+#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
+#else
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
+#endif
+#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
+#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
+#else
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000
+#endif
+#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
+
+/* controller 3, Slot 1, tgtid 1, Base address 202000 */
+#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull
+#else
+#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000
+#endif
+#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
+#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
+#else
+#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000
+#endif
+#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
+
+/* controller 4, Base address 203000 */
+#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull
+#define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
+#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */
+
+/* Qman/Bman */
+#ifndef CONFIG_NOBQFMAN
+#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
+#define CONFIG_SYS_BMAN_NUM_PORTALS 50
+#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
+#else
+#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
+#endif
+#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
+#define CONFIG_SYS_QMAN_NUM_PORTALS 50
+#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
+#else
+#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
+#endif
+#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
+
+#define CONFIG_SYS_DPAA_FMAN
+#define CONFIG_SYS_DPAA_PME
+#define CONFIG_SYS_PMAN
+#define CONFIG_SYS_DPAA_DCE
+#define CONFIG_SYS_INTERLAKEN
+
+/* Default address of microcode for the Linux Fman driver */
+#if defined(CONFIG_SPIFLASH)
+/*
+ * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
+ * env, so we got 0x110000.
+ */
+#define CONFIG_SYS_QE_FW_IN_SPIFLASH
+#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000
+#elif defined(CONFIG_SDCARD)
+/*
+ * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
+ * about 545KB (1089 blocks), Env is stored after the image, and the env size is
+ * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
+#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130)
+#elif defined(CONFIG_NAND)
+#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
+#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#else
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000
+#endif
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
+#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
+#endif /* CONFIG_NOBQFMAN */
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_FMAN_ENET
+#define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_VITESSE
+#define CONFIG_PHY_TERANETICS
+#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
+#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
+#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
+#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
+#define XFI_CARD_PORT1_PHY_ADDR 0x1 /* tmp, FIXME below addr */
+#define XFI_CARD_PORT2_PHY_ADDR 0x2
+#define XFI_CARD_PORT3_PHY_ADDR 0x3
+#define XFI_CARD_PORT4_PHY_ADDR 0x4
+#define QSGMII_CARD_PHY_ADDR 0x5
+#define FM1_10GEC1_PHY_ADDR 0x6
+#define FM1_10GEC2_PHY_ADDR 0x7
+#define FM2_10GEC1_PHY_ADDR 0x8
+#define FM2_10GEC2_PHY_ADDR 0x9
+#endif
+
+#ifdef CONFIG_PCI
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_E1000
+
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_DOS_PARTITION
+#endif /* CONFIG_PCI */
+
+/* SATA */
+#ifdef CONFIG_FSL_SATA_V2
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CONFIG_SYS_SATA_MAX_DEVICE 2
+#define CONFIG_SATA1
+#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
+#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
+#define CONFIG_SATA2
+#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
+#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
+
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#endif
+
+#ifdef CONFIG_FMAN_ENET
+#define CONFIG_MII /* MII PHY management */
+#define CONFIG_ETHPRIME "FM1@DTSEC1"
+#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
+#endif
+
+/*
+ * Environment
+ */
+#define CONFIG_LOADS_ECHO /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ERRATA
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
+
+#ifdef CONFIG_PCI
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#endif
+
+/*
+* USB
+*/
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_CMD_EXT2
+#define CONFIG_HAS_FSL_DR_USB
+
+#define CONFIG_MMC
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
+#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
+#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 64 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
+
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ROOTPATH "/opt/nfsroot"
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR 1000000
+
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+
+#define CONFIG_BAUDRATE 115200
+
+#define __USB_PHY_TYPE utmi
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:ctlr_intlv=3way_4KB," \
+ "bank_intlv=auto;" \
+ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
+ "netdev=eth0\0" \
+ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
+ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot && " \
+ "protect off $ubootaddr +$filesize && " \
+ "erase $ubootaddr +$filesize && " \
+ "cp.b $loadaddr $ubootaddr $filesize && " \
+ "protect on $ubootaddr +$filesize && " \
+ "cmp.b $loadaddr $ubootaddr $filesize\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=2000000\0" \
+ "ramdiskfile=t4240qds/ramdisk.uboot\0" \
+ "fdtaddr=c00000\0" \
+ "fdtfile=t4240qds/t4240qds.dtb\0" \
+ "bdev=sda3\0" \
+ "c=ffe\0"
+
+/* For emulation this causes u-boot to jump to the start of the proof point
+ app code automatically */
+#define CONFIG_PROOF_POINTS \
+ "setenv bootargs root=/dev/$bdev rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "cpu 1 release 0x29000000 - - -;" \
+ "cpu 2 release 0x29000000 - - -;" \
+ "cpu 3 release 0x29000000 - - -;" \
+ "cpu 4 release 0x29000000 - - -;" \
+ "cpu 5 release 0x29000000 - - -;" \
+ "cpu 6 release 0x29000000 - - -;" \
+ "cpu 7 release 0x29000000 - - -;" \
+ "go 0x29000000"
+
+#define CONFIG_HVBOOT \
+ "setenv bootargs config-addr=0x60000000; " \
+ "bootm 0x01000000 - 0x00f00000"
+
+#define CONFIG_ALU \
+ "setenv bootargs root=/dev/$bdev rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "cpu 1 release 0x01000000 - - -;" \
+ "cpu 2 release 0x01000000 - - -;" \
+ "cpu 3 release 0x01000000 - - -;" \
+ "cpu 4 release 0x01000000 - - -;" \
+ "cpu 5 release 0x01000000 - - -;" \
+ "cpu 6 release 0x01000000 - - -;" \
+ "cpu 7 release 0x01000000 - - -;" \
+ "go 0x01000000"
+
+#define CONFIG_LINUX \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "setenv ramdiskaddr 0x02000000;" \
+ "setenv fdtaddr 0x00c00000;" \
+ "setenv loadaddr 0x1000000;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_HDBOOT \
+ "setenv bootargs root=/dev/$bdev rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_LINUX
+
+#ifdef CONFIG_SECURE_BOOT
+#include <asm/fsl_secure_boot.h>
+#endif
+
+#endif /* __CONFIG_H */
#endif
#define BOOTCMDS_COMMON \
- "scriptaddr=0x400000\0" \
- \
"rootpart=1\0" \
\
"script_boot=" \
#endif
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ * else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ * decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ * should not overlap that area, or the kernel will have to copy itself
+ * somewhere else before decompression. Similarly, the address of any other
+ * data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ * this up to 16M allows for a sizable kernel to be decompressed below the
+ * compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ * the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ * for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "scriptaddr=0x10000000\0" \
+ "kernel_addr_r=0x01000000\0" \
+ "fdt_addr_r=0x02000000\0" \
+ "ramdisk_addr_r=0x02100000\0" \
+
#define CONFIG_EXTRA_ENV_SETTINGS \
TEGRA_DEVICE_SETTINGS \
- "fdt_load=0x01000000\0" \
- "fdt_high=01100000\0" \
+ MEM_LAYOUT_ENV_SETTINGS \
BOOTCMDS_COMMON
/* overrides for SPL build here */
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
#define CONFIG_SYS_TEXT_BASE 0x0010c000
+#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
+
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
/* Defines for SPL */
#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_RAM_DEVICE
+#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_TEXT_BASE 0x00108000
-#define CONFIG_SPL_MAX_SIZE 0x00004000
+#define CONFIG_SPL_MAX_SIZE (CONFIG_SYS_TEXT_BASE - \
+ CONFIG_SPL_TEXT_BASE)
#define CONFIG_SYS_SPL_MALLOC_START 0x00090000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000
#define CONFIG_SPL_STACK 0x000ffffc
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds"
#define CONFIG_SYS_NAND_SELF_INIT
+#define CONFIG_SYS_NAND_ONFI_DETECTION
#endif /* __TEGRA20_COMMON_H */
#define CONFIG_ARM1176
#define CONFIG_TNETV107X
#define CONFIG_TNETV107X_EVM
+#define CONFIG_TNETV107X_WATCHDOG
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_DISABLE_TCM
"run nandargs; " \
"run loaduimage_ubi; " \
"bootm ${loadaddr}\0" \
- "autoboot=if mmc rescan ${mmcdev}; then " \
+ "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
#define CONFIG_SYS_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
#ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_PXA_MMC_GENERIC
#define CONFIG_CMD_MMC
#define CONFIG_SYS_MMC_BASE 0xF0000000
#endif
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
#endif
#endif /* __CONFIG_H */
*-----------------------------------------------------------------------
*/
+#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
--- /dev/null
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __DWMMC_HW_H
+#define __DWMMC_HW_H
+
+#include <asm/io.h>
+#include <mmc.h>
+
+#define DWMCI_CTRL 0x000
+#define DWMCI_PWREN 0x004
+#define DWMCI_CLKDIV 0x008
+#define DWMCI_CLKSRC 0x00C
+#define DWMCI_CLKENA 0x010
+#define DWMCI_TMOUT 0x014
+#define DWMCI_CTYPE 0x018
+#define DWMCI_BLKSIZ 0x01C
+#define DWMCI_BYTCNT 0x020
+#define DWMCI_INTMASK 0x024
+#define DWMCI_CMDARG 0x028
+#define DWMCI_CMD 0x02C
+#define DWMCI_RESP0 0x030
+#define DWMCI_RESP1 0x034
+#define DWMCI_RESP2 0x038
+#define DWMCI_RESP3 0x03C
+#define DWMCI_MINTSTS 0x040
+#define DWMCI_RINTSTS 0x044
+#define DWMCI_STATUS 0x048
+#define DWMCI_FIFOTH 0x04C
+#define DWMCI_CDETECT 0x050
+#define DWMCI_WRTPRT 0x054
+#define DWMCI_GPIO 0x058
+#define DWMCI_TCMCNT 0x05C
+#define DWMCI_TBBCNT 0x060
+#define DWMCI_DEBNCE 0x064
+#define DWMCI_USRID 0x068
+#define DWMCI_VERID 0x06C
+#define DWMCI_HCON 0x070
+#define DWMCI_UHS_REG 0x074
+#define DWMCI_BMOD 0x080
+#define DWMCI_PLDMND 0x084
+#define DWMCI_DBADDR 0x088
+#define DWMCI_IDSTS 0x08C
+#define DWMCI_IDINTEN 0x090
+#define DWMCI_DSCADDR 0x094
+#define DWMCI_BUFADDR 0x098
+#define DWMCI_DATA 0x200
+
+/* Interrupt Mask register */
+#define DWMCI_INTMSK_ALL 0xffffffff
+#define DWMCI_INTMSK_RE (1 << 1)
+#define DWMCI_INTMSK_CDONE (1 << 2)
+#define DWMCI_INTMSK_DTO (1 << 3)
+#define DWMCI_INTMSK_TXDR (1 << 4)
+#define DWMCI_INTMSK_RXDR (1 << 5)
+#define DWMCI_INTMSK_DCRC (1 << 7)
+#define DWMCI_INTMSK_RTO (1 << 8)
+#define DWMCI_INTMSK_DRTO (1 << 9)
+#define DWMCI_INTMSK_HTO (1 << 10)
+#define DWMCI_INTMSK_FRUN (1 << 11)
+#define DWMCI_INTMSK_HLE (1 << 12)
+#define DWMCI_INTMSK_SBE (1 << 13)
+#define DWMCI_INTMSK_ACD (1 << 14)
+#define DWMCI_INTMSK_EBE (1 << 15)
+
+/* Raw interrupt Regsiter */
+#define DWMCI_DATA_ERR (DWMCI_INTMSK_EBE | DWMCI_INTMSK_SBE | DWMCI_INTMSK_HLE |\
+ DWMCI_INTMSK_FRUN | DWMCI_INTMSK_EBE | DWMCI_INTMSK_DCRC)
+#define DWMCI_DATA_TOUT (DWMCI_INTMSK_HTO | DWMCI_INTMSK_DRTO)
+/* CTRL register */
+#define DWMCI_CTRL_RESET (1 << 0)
+#define DWMCI_CTRL_FIFO_RESET (1 << 1)
+#define DWMCI_CTRL_DMA_RESET (1 << 2)
+#define DWMCI_DMA_EN (1 << 5)
+#define DWMCI_CTRL_SEND_AS_CCSD (1 << 10)
+#define DWMCI_IDMAC_EN (1 << 25)
+#define DWMCI_RESET_ALL (DWMCI_CTRL_RESET | DWMCI_CTRL_FIFO_RESET |\
+ DWMCI_CTRL_DMA_RESET)
+
+/* CMD register */
+#define DWMCI_CMD_RESP_EXP (1 << 6)
+#define DWMCI_CMD_RESP_LENGTH (1 << 7)
+#define DWMCI_CMD_CHECK_CRC (1 << 8)
+#define DWMCI_CMD_DATA_EXP (1 << 9)
+#define DWMCI_CMD_RW (1 << 10)
+#define DWMCI_CMD_SEND_STOP (1 << 12)
+#define DWMCI_CMD_ABORT_STOP (1 << 14)
+#define DWMCI_CMD_PRV_DAT_WAIT (1 << 13)
+#define DWMCI_CMD_UPD_CLK (1 << 21)
+#define DWMCI_CMD_USE_HOLD_REG (1 << 29)
+#define DWMCI_CMD_START (1 << 31)
+
+/* CLKENA register */
+#define DWMCI_CLKEN_ENABLE (1 << 0)
+#define DWMCI_CLKEN_LOW_PWR (1 << 16)
+
+/* Card-type registe */
+#define DWMCI_CTYPE_1BIT 0
+#define DWMCI_CTYPE_4BIT (1 << 0)
+#define DWMCI_CTYPE_8BIT (1 << 16)
+
+/* Status Register */
+#define DWMCI_BUSY (1 << 9)
+
+/* FIFOTH Register */
+#define MSIZE(x) ((x) << 28)
+#define RX_WMARK(x) ((x) << 16)
+#define TX_WMARK(x) (x)
+
+#define DWMCI_IDMAC_OWN (1 << 31)
+#define DWMCI_IDMAC_CH (1 << 4)
+#define DWMCI_IDMAC_FS (1 << 3)
+#define DWMCI_IDMAC_LD (1 << 2)
+
+/* Bus Mode Register */
+#define DWMCI_BMOD_IDMAC_RESET (1 << 0)
+#define DWMCI_BMOD_IDMAC_FB (1 << 1)
+#define DWMCI_BMOD_IDMAC_EN (1 << 7)
+
+struct dwmci_host {
+ char *name;
+ void *ioaddr;
+ unsigned int quirks;
+ unsigned int caps;
+ unsigned int version;
+ unsigned int clock;
+ unsigned int bus_hz;
+ int dev_index;
+ int buswidth;
+ u32 fifoth_val;
+ struct mmc *mmc;
+
+ void (*clksel)(struct dwmci_host *host);
+ unsigned int (*mmc_clk)(int dev_index);
+};
+
+struct dwmci_idmac {
+ u32 flags;
+ u32 cnt;
+ u32 addr;
+ u32 next_addr;
+};
+
+static inline void dwmci_writel(struct dwmci_host *host, int reg, u32 val)
+{
+ writel(val, host->ioaddr + reg);
+}
+
+static inline void dwmci_writew(struct dwmci_host *host, int reg, u16 val)
+{
+ writew(val, host->ioaddr + reg);
+}
+
+static inline void dwmci_writeb(struct dwmci_host *host, int reg, u8 val)
+{
+ writeb(val, host->ioaddr + reg);
+}
+static inline u32 dwmci_readl(struct dwmci_host *host, int reg)
+{
+ return readl(host->ioaddr + reg);
+}
+
+static inline u16 dwmci_readw(struct dwmci_host *host, int reg)
+{
+ return readw(host->ioaddr + reg);
+}
+
+static inline u8 dwmci_readb(struct dwmci_host *host, int reg)
+{
+ return readb(host->ioaddr + reg);
+}
+
+int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk);
+#endif /* __DWMMC_HW_H */
#ifdef CONFIG_SYS_DPAA_FMAN
unsigned long freqFMan[CONFIG_SYS_NUM_FMAN];
#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ unsigned long freqQMAN;
+#endif
#ifdef CONFIG_SYS_DPAA_PME
unsigned long freqPME;
#endif
--- /dev/null
+/*
+ * (C) Copyright 2000-2010
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Andreas Heppel <aheppel@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifdef DEFAULT_ENV_INSTANCE_EMBEDDED
+env_t environment __PPCENV__ = {
+ ENV_CRC, /* CRC Sum */
+#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT
+ 1, /* Flags: valid */
+#endif
+ {
+#elif defined(DEFAULT_ENV_INSTANCE_STATIC)
+static char default_environment[] = {
+#else
+const uchar default_environment[] = {
+#endif
+#ifdef CONFIG_BOOTARGS
+ "bootargs=" CONFIG_BOOTARGS "\0"
+#endif
+#ifdef CONFIG_BOOTCOMMAND
+ "bootcmd=" CONFIG_BOOTCOMMAND "\0"
+#endif
+#ifdef CONFIG_RAMBOOTCOMMAND
+ "ramboot=" CONFIG_RAMBOOTCOMMAND "\0"
+#endif
+#ifdef CONFIG_NFSBOOTCOMMAND
+ "nfsboot=" CONFIG_NFSBOOTCOMMAND "\0"
+#endif
+#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
+ "bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0"
+#endif
+#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0)
+ "baudrate=" __stringify(CONFIG_BAUDRATE) "\0"
+#endif
+#ifdef CONFIG_LOADS_ECHO
+ "loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0"
+#endif
+#ifdef CONFIG_ETHADDR
+ "ethaddr=" __stringify(CONFIG_ETHADDR) "\0"
+#endif
+#ifdef CONFIG_ETH1ADDR
+ "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"
+#endif
+#ifdef CONFIG_ETH2ADDR
+ "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"
+#endif
+#ifdef CONFIG_ETH3ADDR
+ "eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0"
+#endif
+#ifdef CONFIG_ETH4ADDR
+ "eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0"
+#endif
+#ifdef CONFIG_ETH5ADDR
+ "eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0"
+#endif
+#ifdef CONFIG_ETHPRIME
+ "ethprime=" CONFIG_ETHPRIME "\0"
+#endif
+#ifdef CONFIG_IPADDR
+ "ipaddr=" __stringify(CONFIG_IPADDR) "\0"
+#endif
+#ifdef CONFIG_SERVERIP
+ "serverip=" __stringify(CONFIG_SERVERIP) "\0"
+#endif
+#ifdef CONFIG_SYS_AUTOLOAD
+ "autoload=" CONFIG_SYS_AUTOLOAD "\0"
+#endif
+#ifdef CONFIG_PREBOOT
+ "preboot=" CONFIG_PREBOOT "\0"
+#endif
+#ifdef CONFIG_ROOTPATH
+ "rootpath=" CONFIG_ROOTPATH "\0"
+#endif
+#ifdef CONFIG_GATEWAYIP
+ "gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0"
+#endif
+#ifdef CONFIG_NETMASK
+ "netmask=" __stringify(CONFIG_NETMASK) "\0"
+#endif
+#ifdef CONFIG_HOSTNAME
+ "hostname=" __stringify(CONFIG_HOSTNAME) "\0"
+#endif
+#ifdef CONFIG_BOOTFILE
+ "bootfile=" CONFIG_BOOTFILE "\0"
+#endif
+#ifdef CONFIG_LOADADDR
+ "loadaddr=" __stringify(CONFIG_LOADADDR) "\0"
+#endif
+#ifdef CONFIG_CLOCKS_IN_MHZ
+ "clocks_in_mhz=1\0"
+#endif
+#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0)
+ "pcidelay=" __stringify(CONFIG_PCI_BOOTDELAY)"\0"
+#endif
+#ifdef CONFIG_ENV_VARS_UBOOT_CONFIG
+ "arch=" CONFIG_SYS_ARCH "\0"
+ "cpu=" CONFIG_SYS_CPU "\0"
+ "board=" CONFIG_SYS_BOARD "\0"
+ "board_name=" CONFIG_SYS_BOARD "\0"
+#ifdef CONFIG_SYS_VENDOR
+ "vendor=" CONFIG_SYS_VENDOR "\0"
+#endif
+#ifdef CONFIG_SYS_SOC
+ "soc=" CONFIG_SYS_SOC "\0"
+#endif
+#endif
+#ifdef CONFIG_EXTRA_ENV_SETTINGS
+ CONFIG_EXTRA_ENV_SETTINGS
+#endif
+ "\0"
+#ifdef DEFAULT_ENV_INSTANCE_EMBEDDED
+ }
+#endif
+};
extern struct ext2_data *ext4fs_root;
extern struct ext2fs_node *ext4fs_file;
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
extern struct ext2_inode *g_parent_inode;
extern int gd_index;
extern int gindex;
int do_ext4_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]);
int do_ext4_write(cmd_tbl_t *cmdtp, int flag, int argc,
char *const argv[]);
-int do_ext_load(cmd_tbl_t *cmdtp, int flag, int argc,
- char *const argv[]);
-int do_ext_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]);
#endif
unsigned long maxsize);
long file_fat_read(const char *filename, void *buffer, unsigned long maxsize);
const char *file_getfsname(int idx);
+int fat_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info);
int fat_register_device(block_dev_desc_t *dev_desc, int part_no);
int file_fat_write(const char *filename, void *buffer, unsigned long maxsize);
#define TOSH_ID_FVT160 0xC2 /* TC58FVT160 ID (16 M, top ) */
#define TOSH_ID_FVB160 0x43 /* TC58FVT160 ID (16 M, bottom ) */
-#define PHILIPS_LPC2292 0x0401FF13 /* LPC2292 internal FLASH */
#define NUMONYX_256MBIT 0x8922 /* Numonyx P33/30 256MBit 65nm */
/*-----------------------------------------------------------------------
/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
FM1_DTSEC3,
FM1_DTSEC4,
FM1_DTSEC5,
+ FM1_DTSEC6,
+ FM1_DTSEC9,
+ FM1_DTSEC10,
FM1_10GEC1,
+ FM1_10GEC2,
FM2_DTSEC1,
FM2_DTSEC2,
FM2_DTSEC3,
FM2_DTSEC4,
FM2_DTSEC5,
+ FM2_DTSEC6,
+ FM2_DTSEC9,
+ FM2_DTSEC10,
FM2_10GEC1,
+ FM2_10GEC2,
NUM_FM_PORTS,
};
FM_ETH_10G_E,
};
+#ifdef CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FM1_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfc000)
+#define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfd000)
+#define CONFIG_SYS_FM2_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfc000)
+#define CONFIG_SYS_FM2_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfd000)
+#else
#define CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xe1120)
#define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xf1000)
+#endif
#define DEFAULT_FM_MDIO_NAME "FSL_MDIO0"
#define DEFAULT_FM_TGEC_MDIO_NAME "FM_TGEC_MDIO"
.phy_regs = (void *)pregs, \
.enet_if = PHY_INTERFACE_MODE_NONE, \
+#ifdef CONFIG_SYS_FMAN_V3
+#define FM_DTSEC_INFO_INITIALIZER(idx, n) \
+{ \
+ FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC_MDIO_ADDR) \
+ .index = idx, \
+ .num = n - 1, \
+ .type = FM_ETH_1G_E, \
+ .port = FM##idx##_DTSEC##n, \
+ .rx_port_id = RX_PORT_1G_BASE + n - 1, \
+ .tx_port_id = TX_PORT_1G_BASE + n - 1, \
+ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
+ offsetof(struct ccsr_fman, memac[n-1]),\
+}
+
+#define FM_TGEC_INFO_INITIALIZER(idx, n) \
+{ \
+ FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \
+ .index = idx, \
+ .num = n - 1, \
+ .type = FM_ETH_10G_E, \
+ .port = FM##idx##_10GEC##n, \
+ .rx_port_id = RX_PORT_10G_BASE + n - 1, \
+ .tx_port_id = TX_PORT_10G_BASE + n - 1, \
+ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
+ offsetof(struct ccsr_fman, memac[n-1]),\
+}
+#else
#define FM_DTSEC_INFO_INITIALIZER(idx, n) \
{ \
FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR) \
.compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
offsetof(struct ccsr_fman, mac_10g[n-1]),\
}
-
+#endif
struct fm_eth_info {
u8 enabled;
u8 fm;
char *name;
};
+struct memac_mdio_info {
+ struct memac_mdio_controller *regs;
+ char *name;
+};
+
int fm_tgec_mdio_init(bd_t *bis, struct tgec_mdio_info *info);
+int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info);
+
int fm_standard_init(bd_t *bis);
void fman_enet_init(void);
void fdt_fixup_fman_ethernet(void *fdt);
--- /dev/null
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _FS_H
+#define _FS_H
+
+#include <common.h>
+
+#define FS_TYPE_ANY 0
+#define FS_TYPE_FAT 1
+#define FS_TYPE_EXT 2
+
+/*
+ * Tell the fs layer which block device an partition to use for future
+ * commands. This also internally identifies the filesystem that is present
+ * within the partition. The identification process may be limited to a
+ * specific filesystem type by passing FS_* in the fstype parameter.
+ *
+ * Returns 0 on success.
+ * Returns non-zero if there is an error accessing the disk or partition, or
+ * no known filesystem type could be recognized on it.
+ */
+int fs_set_blk_dev(const char *ifname, const char *dev_part_str, int fstype);
+
+/*
+ * Print the list of files on the partition previously set by fs_set_blk_dev(),
+ * in directory "dirname".
+ *
+ * Returns 0 on success. Returns non-zero on error.
+ */
+int fs_ls(const char *dirname);
+
+/*
+ * Read file "filename" from the partition previously set by fs_set_blk_dev(),
+ * to address "addr", starting at byte offset "offset", and reading "len"
+ * bytes. "offset" may be 0 to read from the start of the file. "len" may be
+ * 0 to read the entire file. Note that not all filesystem types support
+ * either/both offset!=0 or len!=0.
+ *
+ * Returns number of bytes read on success. Returns <= 0 on error.
+ */
+int fs_read(const char *filename, ulong addr, int offset, int len);
+
+/*
+ * Common implementation for various filesystem commands, optionally limited
+ * to a specific filesystem type via the fstype parameter.
+ */
+int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
+ int fstype, int cmdline_base);
+int do_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
+ int fstype);
+
+#endif /* _FS_H */
/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
* Jun-jie Zhang <b18070@freescale.com>
* Mingkai Hu <Mingkai.hu@freescale.com>
*
int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum);
int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
u16 value);
+int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum, u16 value);
+int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum);
struct fsl_pq_mdio_info {
struct tsec_mii_mng *regs;
#define I8042_STATUS_REG (CONFIG_SYS_ISA_IO + 0x0064) /* keyboard status read */
#define I8042_COMMAND_REG (CONFIG_SYS_ISA_IO + 0x0064) /* keyboard ctrl write */
+enum {
+ /* Output register (I8042_DATA_REG) has data for system */
+ I8042_STATUS_OUT_DATA = 1 << 0,
+ I8042_STATUS_IN_DATA = 1 << 1,
+};
+
#define KBD_US 0 /* default US layout */
#define KBD_GER 1 /* german layout */
/* exports */
+/**
+ * Flush all buffer from keyboard controller to host.
+ */
+void i8042_flush(void);
+
+/**
+ * Disables the keyboard so that key strokes no longer generate scancodes to
+ * the host.
+ *
+ * @return 0 if ok, -1 if keyboard input was found while disabling
+ */
+int i8042_disable(void);
+
int i8042_kbd_init(void);
int i8042_tstc(void);
int i8042_getc(void);
#define IDE_BUS(dev) (dev / (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS))
#define ATA_CURR_BASE(dev) (CONFIG_SYS_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
+extern ulong ide_bus_offset[];
#ifdef CONFIG_IDE_LED
#ifdef CONFIG_SYS_64BIT_LBA
typedef uint64_t lbaint_t;
+#define LBAF "%llx"
#else
typedef ulong lbaint_t;
+#define LBAF "%lx"
#endif
/*
ulong ide_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer);
ulong ide_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer);
+#ifdef CONFIG_IDE_PREINIT
+int ide_preinit(void);
+#endif
+
+#ifdef CONFIG_IDE_INIT_POSTRESET
+int ide_init_postreset(void);
+#endif
+
#if defined(CONFIG_OF_IDE_FIXUP)
int ide_device_present(int dev);
#endif
void ide_read_data(int dev, ulong *sect_buf, int words);
void ide_write_data(int dev, ulong *sect_buf, int words);
#endif
+
+/*
+ * I/O function overrides
+ */
+void ide_input_swap_data(int dev, ulong *sect_buf, int words);
+void ide_input_data(int dev, ulong *sect_buf, int words);
+void ide_output_data(int dev, const ulong *sect_buf, int words);
+void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts);
+void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts);
+
#endif /* _IDE_H */
#define __IMAGE_H__
#include "compiler.h"
+#include <asm/byteorder.h>
#ifdef USE_HOSTCC
* all data in network byte order (aka natural aka bigendian).
*/
typedef struct image_header {
- uint32_t ih_magic; /* Image Header Magic Number */
- uint32_t ih_hcrc; /* Image Header CRC Checksum */
- uint32_t ih_time; /* Image Creation Timestamp */
- uint32_t ih_size; /* Image Data Size */
- uint32_t ih_load; /* Data Load Address */
- uint32_t ih_ep; /* Entry Point Address */
- uint32_t ih_dcrc; /* Image Data CRC Checksum */
+ __be32 ih_magic; /* Image Header Magic Number */
+ __be32 ih_hcrc; /* Image Header CRC Checksum */
+ __be32 ih_time; /* Image Creation Timestamp */
+ __be32 ih_size; /* Image Data Size */
+ __be32 ih_load; /* Data Load Address */
+ __be32 ih_ep; /* Entry Point Address */
+ __be32 ih_dcrc; /* Image Data CRC Checksum */
uint8_t ih_os; /* Operating System */
uint8_t ih_arch; /* CPU architecture */
uint8_t ih_type; /* Image Type */
#define FIT_HASH_NODENAME "hash"
#define FIT_ALGO_PROP "algo"
#define FIT_VALUE_PROP "value"
+#define FIT_IGNORE_PROP "uboot-ignore"
/* image node */
#define FIT_DATA_PROP "data"
int fit_image_hash_get_algo(const void *fit, int noffset, char **algo);
int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
int *value_len);
+#ifndef USE_HOSTCC
+int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore);
+#endif
int fit_set_timestamp(void *fit, int noffset, time_t timestamp);
int fit_set_hashes(void *fit);
* @param config Input state
* @param keycode List of key codes to examine
* @param num_keycodes Number of key codes
+ * @return number of ascii characters sent, or 0 if none, or -1 for an
+ * internal error
*/
int input_send_keycodes(struct input_config *config, int keycode[], int count);
+++ /dev/null
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * lh7a400 SoC interface
- */
-
-#ifndef __LH7A400_H__
-#define __LH7A400_H__
-
-#include "lh7a40x.h"
-
-/* Interrupt Controller (userguide 8.2.1) */
-typedef struct {
- volatile u32 intsr;
- volatile u32 intrsr;
- volatile u32 intens;
- volatile u32 intenc;
- volatile u32 rsvd1;
- volatile u32 rsvd2;
- volatile u32 rsvd3;
-} /*__attribute__((__packed__))*/ lh7a400_interrupt_t;
-#define LH7A400_INTERRUPT_BASE (0x80000500)
-#define LH7A400_INTERRUPT_PTR ((lh7a400_interrupt_t*) LH7A400_INTERRUPT_BASE)
-
-/* (DMA) Direct Memory Access Controller (userguide 9.2.1) */
-typedef struct {
- lh7a40x_dmachan_t chan[15];
- volatile u32 glblint;
- volatile u32 rsvd1;
- volatile u32 rsvd2;
- volatile u32 rsvd3;
-} /*__attribute__((__packed__))*/ lh7a400_dma_t;
-
-#define LH7A400_DMA_BASE (0x80002800)
-#define DMA_USBTX_OFFSET (0x000)
-#define DMA_USBRX_OFFSET (0x040)
-#define DMA_MMCTX_OFFSET (0x080)
-#define DMA_MMCRX_OFFSET (0x0C0)
-#define DMA_AC97_BASE (0x80002A00)
-
-#define LH7A400_DMA_PTR ((lh7a400_dma_t*) LH7A400_DMA_BASE)
-#define LH7A400_DMA_USBTX \
- ((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_USBTX_OFFSET))
-#define LH7A400_DMA_USBRX \
- ((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_USBRX_OFFSET))
-#define LH7A400_DMA_MMCTX \
- ((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_MMCTX_OFFSET))
-#define LH7A400_DMA_MMCRX \
- ((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_MMCRX_OFFSET))
-#define LH7A400_AC97RX(n) \
- ((lh7a400_dmachan_t*) (LH7A400_AC97_BASE + \
- ((2*n) * sizeof(lh7a400_dmachan_t))))
-#define LH7A400_AC97TX(n) \
- ((lh7a400_dmachan_t*) (LH7A400_AC97_BASE + \
- (((2*n)+1) * sizeof(lh7a400_dmachan_t))))
-
-#endif /* __LH7A400_H__ */
+++ /dev/null
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * lh7a404 SoC interface
- */
-
-#ifndef __LH7A404_H__
-#define __LH7A404_H__
-
-#include "lh7a40x.h"
-
-/* Interrupt Controller (userguide 8.2.1) */
-typedef struct {
- volatile u32 irqstatus;
- volatile u32 fiqstatus;
- volatile u32 rawintr;
- volatile u32 intsel;
- volatile u32 inten;
- volatile u32 intenclr;
- volatile u32 softint;
- volatile u32 softintclr;
- volatile u32 protect;
- volatile u32 unused1;
- volatile u32 unused2;
- volatile u32 vectaddr;
- volatile u32 nvaddr;
- volatile u32 unused3[32];
- volatile u32 vad[16];
- volatile u32 unused4[44];
- volatile u32 vectcntl[16];
- volatile u32 unused5[44];
- volatile u32 itcr;
- volatile u32 itip1;
- volatile u32 itip2;
- volatile u32 itop1;
- volatile u32 itop2;
- volatile u32 unused6[333];
- volatile u32 periphid[4];
- volatile u32 pcellid[4];
-} /*__attribute__((__packed__))*/ lh7a404_vic_t;
-#define LH7A404_VIC_BASE (0x80008000)
-#define LH7A400_VIC_PTR(x) ((lh7a404_vic_t*)(LH7A400_VIC_BASE + (x*0x2000)))
-
-
-typedef struct {
- lh7a40x_dmachan_t m2p0_tx;
- lh7a40x_dmachan_t m2p1_rx;
- lh7a40x_dmachan_t m2p2_tx;
- lh7a40x_dmachan_t m2p3_rx;
- lh7a40x_dmachan_t m2m0;
- lh7a40x_dmachan_t m2m1;
- lh7a40x_dmachan_t unused1;
- lh7a40x_dmachan_t unused2;
- lh7a40x_dmachan_t m2p5_rx;
- lh7a40x_dmachan_t m2p4_tx;
- lh7a40x_dmachan_t m2p7_rx;
- lh7a40x_dmachan_t m2p6_tx;
- lh7a40x_dmachan_t m2p9_rx;
- lh7a40x_dmachan_t m2p8_tx;
- volatile u32 chanarb;
- volatile u32 glblint;
-} /*__attribute__((__packed__))*/ lh7a400_dma_t;
-
-
-#endif /* __LH7A404_H__ */
+++ /dev/null
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * lh7a40x SoC series common interface
- */
-
-#ifndef __LH7A40X_H__
-#define __LH7A40X_H__
-
-/* (SMC) Static Memory Controller (usersguide 4.2.1) */
-typedef struct {
- volatile u32 attib;
- volatile u32 com;
- volatile u32 io;
- volatile u32 rsvd1;
-} /*__attribute__((__packed__))*/ lh7a40x_pccard_t;
-
-typedef struct {
- volatile u32 bcr[8];
- lh7a40x_pccard_t pccard[2];
- volatile u32 pcmciacon;
-} /*__attribute__((__packed__))*/ lh7a40x_smc_t;
-#define LH7A40X_SMC_BASE (0x80002000)
-#define LH7A40X_SMC_PTR ((lh7a40x_smc_t*) LH7A40X_SMC_BASE)
-
-/* (SDMC) Synchronous Dynamic Ram Controller (usersguide 5.3.1) */
-typedef struct {
- volatile u32 rsvd1;
- volatile u32 gblcnfg;
- volatile u32 rfshtmr;
- volatile u32 bootstat;
- volatile u32 sdcsc[4];
-} /*__attribute__((__packed__))*/ lh7a40x_sdmc_t;
-#define LH7A40X_SDMC_BASE (0x80002400)
-#define LH7A40X_SDMC_PTR ((lh7a40x_sdmc_t*) LH7A40X_SDMC_BASE)
-
-/* (CSC) Clock and State Controller (userguide 6.2.1) */
-typedef struct {
- volatile u32 pwrsr;
- volatile u32 pwrcnt;
- volatile u32 halt;
- volatile u32 stby;
- volatile u32 bleoi;
- volatile u32 mceoi;
- volatile u32 teoi;
- volatile u32 stfclr;
- volatile u32 clkset;
- volatile u32 scrreg[2];
- volatile u32 rsvd1;
- volatile u32 usbreset;
-} /*__attribute__((__packed__))*/ lh7a40x_csc_t;
-#define LH7A40X_STPWR_BASE (0x80000400)
-#define LH7A40X_CSC_PTR ((lh7a40x_csc_t*) LH7A40X_STPWR_BASE)
-
-#define CLKSET_SMCROM (0x01000000)
-#define CLKSET_PS (0x000C0000)
-#define CLKSET_PS_0 (0x00000000)
-#define CLKSET_PS_1 (0x00040000)
-#define CLKSET_PS_2 (0x00080000)
-#define CLKSET_PS_3 (0x000C0000)
-#define CLKSET_PCLKDIV (0x00030000)
-#define CLKSET_PCLKDIV_2 (0x00000000)
-#define CLKSET_PCLKDIV_4 (0x00010000)
-#define CLKSET_PCLKDIV_8 (0x00020000)
-#define CLKSET_MAINDIV2 (0x0000f800)
-#define CLKSET_MAINDIV1 (0x00000780)
-#define CLKSET_PREDIV (0x0000007C)
-#define CLKSET_HCLKDIV (0x00000003)
-
-/* (DMA) Direct Memory Access Controller (userguide 9.2.1) */
-typedef struct {
- volatile u32 maxcnt;
- volatile u32 base;
- volatile u32 current;
- volatile u32 rsvd1;
-} lh7a40x_dmabuf_t;
-
-typedef struct {
- volatile u32 control;
- volatile u32 interrupt;
- volatile u32 rsvd1;
- volatile u32 status;
- volatile u32 rsvd2;
- volatile u32 remain;
- volatile u32 rsvd3;
- volatile u32 rsvd4;
- lh7a40x_dmabuf_t buf[2];
-} /*__attribute__((__packed__))*/ lh7a40x_dmachan_t;
-
-
-/* (WDT) Watchdog Timer (userguide 11.2.1) */
-typedef struct {
- volatile u32 ctl;
- volatile u32 rst;
- volatile u32 status;
- volatile u32 count[4];
-} /*__attribute__((__packed__))*/ lh7a40x_wdt_t;
-#define LH7A40X_WDT_BASE (0x80001400)
-#define LH7A40X_WDT_PTR ((lh7a40x_wdt_t*) LH7A40X_WDT_BASE)
-
-/* (RTC) Real Time Clock (lh7a400 userguide 12.2.1, lh7a404 userguide 13.2.1) */
-typedef struct {
- volatile u32 rtcdr;
- volatile u32 rtclr;
- volatile u32 rtcmr;
- volatile u32 unk1;
- volatile u32 rtcstat_eoi;
- volatile u32 rtccr;
- volatile u32 rsvd1[58];
-} /*__attribute__((__packed__))*/ lh7a40x_rtc_t;
-#define LH7A40X_RTC_BASE (0x80000D00)
-#define LH7A40X_RTC_PTR ((lh7a40x_rtc_t*) LH7A40X_RTC_BASE)
-
-/* Timers (lh7a400 userguide 13.2.1, lh7a404 userguide 11.2.1) */
-typedef struct {
- volatile u32 load;
- volatile u32 value;
- volatile u32 control;
- volatile u32 tceoi;
-} /*__attribute__((__packed__))*/ lh7a40x_timer_t;
-
-typedef struct {
- lh7a40x_timer_t timer1;
- volatile u32 rsvd1[4];
- lh7a40x_timer_t timer2;
- volatile u32 unk1[4];
- volatile u32 bzcon;
- volatile u32 unk2[15];
- lh7a40x_timer_t timer3;
- /*volatile u32 rsvd2;*/
-} /*__attribute__((__packed__))*/ lh7a40x_timers_t;
-#define LH7A40X_TIMERS_BASE (0x80000C00)
-#define LH7A40X_TIMERS_PTR ((lh7a40x_timers_t*) LH7A40X_TIMERS_BASE)
-
-#define TIMER_EN (0x00000080)
-#define TIMER_PER (0x00000040)
-#define TIMER_FREE (0x00000000)
-#define TIMER_CLK508K (0x00000008)
-#define TIMER_CLK2K (0x00000000)
-
-/* (SSP) Sychronous Serial Ports (lh7a400 userguide 14.2.1, lh7a404 userguide 14.2.1) */
-typedef struct {
- volatile u32 cr0;
- volatile u32 cr1;
- volatile u32 irr_roeoi;
- volatile u32 dr;
- volatile u32 cpr;
- volatile u32 sr;
- /*volatile u32 rsvd1[58];*/
-} /*__attribute__((__packed__))*/ lh7a40x_ssp_t;
-#define LH7A40X_SSP_BASE (0x80000B00)
-#define LH7A40X_SSP_PTR ((lh7a40x_ssp_t*) LH7A40X_SSP_BASE)
-
-/* (UART) Universal Asychronous Receiver/Transmitter (lh7a400 userguide 15.2.1, lh7a404 userguide 15.2.1) */
-typedef struct {
- volatile u32 data;
- volatile u32 fcon;
- volatile u32 brcon;
- volatile u32 con;
- volatile u32 status;
- volatile u32 rawisr;
- volatile u32 inten;
- volatile u32 isr;
- volatile u32 rsvd1[56];
-} /*__attribute__((__packed__))*/ lh7a40x_uart_t;
-#define LH7A40X_UART_BASE (0x80000600)
-#define LH7A40X_UART_PTR(n) \
- ((lh7a40x_uart_t*) (LH7A40X_UART_BASE + ((n-1) * sizeof(lh7a40x_uart_t))))
-
-#define UART_BE (0x00000800) /* the rx error bits */
-#define UART_OE (0x00000400)
-#define UART_PE (0x00000200)
-#define UART_FE (0x00000100)
-
-#define UART_WLEN (0x00000060) /* fcon bits */
-#define UART_WLEN_8 (0x00000060)
-#define UART_WLEN_7 (0x00000040)
-#define UART_WLEN_6 (0x00000020)
-#define UART_WLEN_5 (0x00000000)
-#define UART_FEN (0x00000010)
-#define UART_STP2 (0x00000008)
-#define UART_STP2_2 (0x00000008)
-#define UART_STP2_1 (0x00000000)
-#define UART_EPS (0x00000004)
-#define UART_EPS_EVEN (0x00000004)
-#define UART_EPS_ODD (0x00000000)
-#define UART_PEN (0x00000002)
-#define UART_BRK (0x00000001)
-
-#define UART_BAUDDIV (0x0000ffff) /* brcon bits */
-
-#define UART_SIRBD (0x00000080) /* con bits */
-#define UART_LBE (0x00000040)
-#define UART_MXP (0x00000020)
-#define UART_TXP (0x00000010)
-#define UART_RXP (0x00000008)
-#define UART_SIRLP (0x00000004)
-#define UART_SIRD (0x00000002)
-#define UART_EN (0x00000001)
-
-#define UART_TXFE (0x00000080) /* status bits */
-#define UART_RXFF (0x00000040)
-#define UART_TXFF (0x00000020)
-#define UART_RXFE (0x00000010)
-#define UART_BUSY (0x00000008)
-#define UART_DCD (0x00000004)
-#define UART_DSR (0x00000002)
-#define UART_CTS (0x00000001)
-
-#define UART_MSEOI (0xfffffff0) /* rawisr interrupt bits */
-
-#define UART_RTI (0x00000008) /* generic interrupt bits */
-#define UART_MI (0x00000004)
-#define UART_TI (0x00000002)
-#define UART_RI (0x00000001)
-
-/* (GPIO) General Purpose IO and External Interrupts (userguide 16.2.1) */
-typedef struct {
- volatile u32 pad;
- volatile u32 pbd;
- volatile u32 pcd;
- volatile u32 pdd;
- volatile u32 padd;
- volatile u32 pbdd;
- volatile u32 pcdd;
- volatile u32 pddd;
- volatile u32 ped;
- volatile u32 pedd;
- volatile u32 kbdctl;
- volatile u32 pinmux;
- volatile u32 pfd;
- volatile u32 pfdd;
- volatile u32 pgd;
- volatile u32 pgdd;
- volatile u32 phd;
- volatile u32 phdd;
- volatile u32 rsvd1;
- volatile u32 inttype1;
- volatile u32 inttype2;
- volatile u32 gpiofeoi;
- volatile u32 gpiointen;
- volatile u32 intstatus;
- volatile u32 rawintstatus;
- volatile u32 gpiodb;
- volatile u32 papd;
- volatile u32 pbpd;
- volatile u32 pcpd;
- volatile u32 pdpd;
- volatile u32 pepd;
- volatile u32 pfpd;
- volatile u32 pgpd;
- volatile u32 phpd;
-} /*__attribute__((__packed__))*/ lh7a40x_gpioint_t;
-#define LH7A40X_GPIOINT_BASE (0x80000E00)
-#define LH7A40X_GPIOINT_PTR ((lh7a40x_gpioint_t*) LH7A40X_GPIOINT_BASE)
-
-/* Embedded SRAM */
-#define CONFIG_SYS_SRAM_BASE (0xB0000000)
-#define CONFIG_SYS_SRAM_SIZE (80*1024) /* 80kB */
-
-#endif /* __LH7A40X_H__ */
const void *val, int len);
/**
- * fdt_setprop_inplace_cell - change the value of a single-cell property
+ * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property
* @fdt: pointer to the device tree blob
* @nodeoffset: offset of the node whose property to change
* @name: name of the property to change
- * @val: cell (32-bit integer) value to replace the property with
+ * @val: 32-bit integer value to replace the property with
*
- * fdt_setprop_inplace_cell() replaces the value of a given property
- * with the 32-bit integer cell value in val, converting val to
- * big-endian if necessary. This function cannot change the size of a
- * property, and so will only work if the property already exists and
- * has length 4.
+ * fdt_setprop_inplace_u32() replaces the value of a given property
+ * with the 32-bit integer value in val, converting val to big-endian
+ * if necessary. This function cannot change the size of a property,
+ * and so will only work if the property already exists and has length
+ * 4.
*
* This function will alter only the bytes in the blob which contain
* the given property value, and will not alter or move any other part
* returns:
* 0, on success
* -FDT_ERR_NOSPACE, if the property's length is not equal to 4
- * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_NOTFOUND, node does not have the named property
* -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
* -FDT_ERR_BADMAGIC,
* -FDT_ERR_BADVERSION,
* -FDT_ERR_BADSTRUCTURE,
* -FDT_ERR_TRUNCATED, standard meanings
*/
-static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
- const char *name, uint32_t val)
+static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset,
+ const char *name, uint32_t val)
{
val = cpu_to_fdt32(val);
return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val));
}
+/**
+ * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 64-bit integer value to replace the property with
+ *
+ * fdt_setprop_inplace_u64() replaces the value of a given property
+ * with the 64-bit integer value in val, converting val to big-endian
+ * if necessary. This function cannot change the size of a property,
+ * and so will only work if the property already exists and has length
+ * 8.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, if the property's length is not equal to 8
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset,
+ const char *name, uint64_t val)
+{
+ val = cpu_to_fdt64(val);
+ return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val));
+}
+
+/**
+ * fdt_setprop_inplace_cell - change the value of a single-cell property
+ *
+ * This is an alternative name for fdt_setprop_inplace_u32()
+ */
+static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
+ const char *name, uint32_t val)
+{
+ return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val);
+}
+
/**
* fdt_nop_property - replace a property with nop tags
* @fdt: pointer to the device tree blob
int fdt_finish_reservemap(void *fdt);
int fdt_begin_node(void *fdt, const char *name);
int fdt_property(void *fdt, const char *name, const void *val, int len);
-static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
+static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val)
{
val = cpu_to_fdt32(val);
return fdt_property(fdt, name, &val, sizeof(val));
}
+static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val)
+{
+ val = cpu_to_fdt64(val);
+ return fdt_property(fdt, name, &val, sizeof(val));
+}
+static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
+{
+ return fdt_property_u32(fdt, name, val);
+}
#define fdt_property_string(fdt, name, str) \
fdt_property(fdt, name, str, strlen(str)+1)
int fdt_end_node(void *fdt);
/* Read-write functions */
/**********************************************************************/
+int fdt_create_empty_tree(void *buf, int bufsize);
int fdt_open_into(const void *fdt, void *buf, int bufsize);
int fdt_pack(void *fdt);
const void *val, int len);
/**
- * fdt_setprop_cell - set a property to a single cell value
+ * fdt_setprop_u32 - set a property to a 32-bit integer
* @fdt: pointer to the device tree blob
* @nodeoffset: offset of the node whose property to change
* @name: name of the property to change
* @val: 32-bit integer value for the property (native endian)
*
- * fdt_setprop_cell() sets the value of the named property in the
- * given node to the given cell value (converting to big-endian if
+ * fdt_setprop_u32() sets the value of the named property in the given
+ * node to the given 32-bit integer value (converting to big-endian if
* necessary), or creates a new property with that value if it does
* not already exist.
*
* -FDT_ERR_BADLAYOUT,
* -FDT_ERR_TRUNCATED, standard meanings
*/
-static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
- uint32_t val)
+static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name,
+ uint32_t val)
{
val = cpu_to_fdt32(val);
return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val));
}
+/**
+ * fdt_setprop_u64 - set a property to a 64-bit integer
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 64-bit integer value for the property (native endian)
+ *
+ * fdt_setprop_u64() sets the value of the named property in the given
+ * node to the given 64-bit integer value (converting to big-endian if
+ * necessary), or creates a new property with that value if it does
+ * not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name,
+ uint64_t val)
+{
+ val = cpu_to_fdt64(val);
+ return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val));
+}
+
+/**
+ * fdt_setprop_cell - set a property to a single cell value
+ *
+ * This is an alternative name for fdt_setprop_u32()
+ */
+static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
+ uint32_t val)
+{
+ return fdt_setprop_u32(fdt, nodeoffset, name, val);
+}
+
/**
* fdt_setprop_string - set a property to a string value
* @fdt: pointer to the device tree blob
#define fdt_setprop_string(fdt, nodeoffset, name, str) \
fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+/**
+ * fdt_appendprop - append to or create a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to append to
+ * @val: pointer to data to append to the property value
+ * @len: length of the data to append to the property value
+ *
+ * fdt_appendprop() appends the value to the named property in the
+ * given node, creating the property if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_appendprop(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len);
+
+/**
+ * fdt_appendprop_u32 - append a 32-bit integer value to a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 32-bit integer value to append to the property (native endian)
+ *
+ * fdt_appendprop_u32() appends the given 32-bit integer value
+ * (converting to big-endian if necessary) to the value of the named
+ * property in the given node, or creates a new property with that
+ * value if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_appendprop_u32(void *fdt, int nodeoffset,
+ const char *name, uint32_t val)
+{
+ val = cpu_to_fdt32(val);
+ return fdt_appendprop(fdt, nodeoffset, name, &val, sizeof(val));
+}
+
+/**
+ * fdt_appendprop_u64 - append a 64-bit integer value to a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 64-bit integer value to append to the property (native endian)
+ *
+ * fdt_appendprop_u64() appends the given 64-bit integer value
+ * (converting to big-endian if necessary) to the value of the named
+ * property in the given node, or creates a new property with that
+ * value if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_appendprop_u64(void *fdt, int nodeoffset,
+ const char *name, uint64_t val)
+{
+ val = cpu_to_fdt64(val);
+ return fdt_appendprop(fdt, nodeoffset, name, &val, sizeof(val));
+}
+
+/**
+ * fdt_appendprop_cell - append a single cell value to a property
+ *
+ * This is an alternative name for fdt_appendprop_u32()
+ */
+static inline int fdt_appendprop_cell(void *fdt, int nodeoffset,
+ const char *name, uint32_t val)
+{
+ return fdt_appendprop_u32(fdt, nodeoffset, name, val);
+}
+
+/**
+ * fdt_appendprop_string - append a string to a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @str: string value to append to the property
+ *
+ * fdt_appendprop_string() appends the given string to the value of
+ * the named property in the given node, or creates a new property
+ * with that value if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+#define fdt_appendprop_string(fdt, nodeoffset, name, str) \
+ fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+
/**
* fdt_delprop - delete a property
* @fdt: pointer to the device tree blob
--- /dev/null
+/*
+ * include/linker_lists.h
+ *
+ * Implementation of linker-generated arrays
+ *
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+#ifndef __LINKER_LISTS_H__
+#define __LINKER_LISTS_H__
+
+/**
+ * ll_entry_declare() - Declare linker-generated array entry
+ * @_type: Data type of the entry
+ * @_name: Name of the entry
+ * @_section_u: Subsection of u_boot_list in which this entry is placed
+ * (with underscores instead of dots, for name concatenation)
+ * @_section_d: Subsection of u_boot_list in which this entry is placed
+ * (with dots, for section concatenation)
+ *
+ * This macro declares a variable that is placed into a linker-generated
+ * array. This is a basic building block for more advanced use of linker-
+ * generated arrays. The user is expected to build their own macro wrapper
+ * around this one.
+ *
+ * A variable declared using this macro must be compile-time initialized
+ * and is as such placed into subsection of special section, .u_boot_list.
+ * The subsection is specified by the _section_[u,d] parameter, see below.
+ * The base name of the variable is _name, yet the actual variable is
+ * declared as concatenation of
+ *
+ * %_u_boot_list_ + @_section_u + _ + @_name
+ *
+ * which ensures name uniqueness. This variable shall never be refered
+ * directly though.
+ *
+ * Special precaution must be made when using this macro:
+ * 1) The _type must not contain the "static" keyword, otherwise the entry
+ * is not generated.
+ *
+ * 2) The @_section_u and @_section_d variables must match, the only difference
+ * is that in @_section_u is every dot "." character present in @_section_d
+ * replaced by a single underscore "_" character in @_section_u. The actual
+ * purpose of these parameters is to select proper subsection in the global
+ * .u_boot_list section.
+ *
+ * 3) In case a section is declared that contains some array elements AND a
+ * subsection of this section is declared and contains some elements, it is
+ * imperative that the elements are of the same type.
+ *
+ * 4) In case an outer section is declared that contains some array elements
+ * AND am inner subsection of this section is declared and contains some
+ * elements, then when traversing the outer section, even the elements of
+ * the inner sections are present in the array.
+ *
+ * Example:
+ * ll_entry_declare(struct my_sub_cmd, my_sub_cmd, cmd_sub, cmd.sub) = {
+ * .x = 3,
+ * .y = 4,
+ * };
+ */
+#define ll_entry_declare(_type, _name, _section_u, _section_d) \
+ _type _u_boot_list_##_section_u##_##_name __attribute__(( \
+ unused, aligned(4), \
+ section(".u_boot_list."#_section_d"."#_name)))
+
+/**
+ * ll_entry_start() - Point to first entry of linker-generated array
+ * @_type: Data type of the entry
+ * @_section_u: Subsection of u_boot_list in which this entry is placed
+ * (with underscores instead of dots)
+ *
+ * This function returns (_type *) pointer to the very first entry of a
+ * linker-generated array placed into subsection of .u_boot_list section
+ * specified by _section_u argument.
+ *
+ * Example:
+ * struct my_sub_cmd *msc = ll_entry_start(struct my_sub_cmd, cmd_sub);
+ */
+#define ll_entry_start(_type, _section_u) \
+ ({ \
+ extern _type _u_boot_list_##_section_u##__start; \
+ _type *_ll_result = &_u_boot_list_##_section_u##__start;\
+ _ll_result; \
+ })
+
+/**
+ * ll_entry_count() - Return the number of elements in linker-generated array
+ * @_type: Data type of the entry
+ * @_section_u: Subsection of u_boot_list in which this entry is placed
+ * (with underscores instead of dots)
+ *
+ * This function returns the number of elements of a linker-generated array
+ * placed into subsection of .u_boot_list section specified by _section_u
+ * argument. The result is of an unsigned int type.
+ *
+ * Example:
+ * int i;
+ * const unsigned int count = ll_entry_count(struct my_sub_cmd, cmd_sub);
+ * struct my_sub_cmd *msc = ll_entry_start(struct my_sub_cmd, cmd_sub);
+ * for (i = 0; i < count; i++, msc++)
+ * printf("Entry %i, x=%i y=%i\n", i, msc->x, msc->y);
+ */
+#define ll_entry_count(_type, _section_u) \
+ ({ \
+ extern _type _u_boot_list_##_section_u##__start; \
+ extern _type _u_boot_list_##_section_u##__end; \
+ unsigned int _ll_result = \
+ &_u_boot_list_##_section_u##__end - \
+ &_u_boot_list_##_section_u##__start; \
+ _ll_result; \
+ })
+
+
+/**
+ * ll_entry_get() - Retrieve entry from linker-generated array by name
+ * @_type: Data type of the entry
+ * @_name: Name of the entry
+ * @_section_u: Subsection of u_boot_list in which this entry is placed
+ * (with underscores instead of dots)
+ *
+ * This function returns a pointer to a particular entry in LG-array
+ * identified by the subsection of u_boot_list where the entry resides
+ * and it's name.
+ *
+ * Example:
+ * ll_entry_declare(struct my_sub_cmd, my_sub_cmd, cmd_sub, cmd.sub) = {
+ * .x = 3,
+ * .y = 4,
+ * };
+ * ...
+ * struct my_sub_cmd *c = ll_entry_get(struct my_sub_cmd, my_sub_cmd, cmd_sub);
+ */
+#define ll_entry_get(_type, _name, _section_u) \
+ ({ \
+ extern _type _u_boot_list_##_section_u##_##_name; \
+ _type *_ll_result = &_u_boot_list_##_section_u##_##_name;\
+ _ll_result; \
+ })
+
+#endif /* __LINKER_LISTS_H__ */
#ifndef __BIG_ENDIAN_BITFIELD
#define __BIG_ENDIAN_BITFIELD
#endif
-#define __BYTE_ORDER __BIG_ENDIAN
+#define __BYTE_ORDER __BIG_ENDIAN
+#include <linux/compiler.h>
+#include <linux/types.h>
#include <linux/byteorder/swab.h>
-#define __constant_htonl(x) ((__u32)(x))
-#define __constant_ntohl(x) ((__u32)(x))
-#define __constant_htons(x) ((__u16)(x))
-#define __constant_ntohs(x) ((__u16)(x))
-#define __constant_cpu_to_le64(x) ___swab64((x))
-#define __constant_le64_to_cpu(x) ___swab64((x))
-#define __constant_cpu_to_le32(x) ___swab32((x))
-#define __constant_le32_to_cpu(x) ___swab32((x))
-#define __constant_cpu_to_le16(x) ___swab16((x))
-#define __constant_le16_to_cpu(x) ___swab16((x))
-#define __constant_cpu_to_be64(x) ((__u64)(x))
-#define __constant_be64_to_cpu(x) ((__u64)(x))
-#define __constant_cpu_to_be32(x) ((__u32)(x))
-#define __constant_be32_to_cpu(x) ((__u32)(x))
-#define __constant_cpu_to_be16(x) ((__u16)(x))
-#define __constant_be16_to_cpu(x) ((__u16)(x))
-#define __cpu_to_le64(x) __swab64((x))
-#define __le64_to_cpu(x) __swab64((x))
-#define __cpu_to_le32(x) __swab32((x))
-#define __le32_to_cpu(x) __swab32((x))
-#define __cpu_to_le16(x) __swab16((x))
-#define __le16_to_cpu(x) __swab16((x))
-#define __cpu_to_be64(x) ((__u64)(x))
-#define __be64_to_cpu(x) ((__u64)(x))
-#define __cpu_to_be32(x) ((__u32)(x))
-#define __be32_to_cpu(x) ((__u32)(x))
-#define __cpu_to_be16(x) ((__u16)(x))
-#define __be16_to_cpu(x) ((__u16)(x))
-#define __cpu_to_le64p(x) __swab64p((x))
-#define __le64_to_cpup(x) __swab64p((x))
-#define __cpu_to_le32p(x) __swab32p((x))
-#define __le32_to_cpup(x) __swab32p((x))
-#define __cpu_to_le16p(x) __swab16p((x))
-#define __le16_to_cpup(x) __swab16p((x))
-#define __cpu_to_be64p(x) (*(__u64*)(x))
-#define __be64_to_cpup(x) (*(__u64*)(x))
-#define __cpu_to_be32p(x) (*(__u32*)(x))
-#define __be32_to_cpup(x) (*(__u32*)(x))
-#define __cpu_to_be16p(x) (*(__u16*)(x))
-#define __be16_to_cpup(x) (*(__u16*)(x))
+#define __constant_htonl(x) ((__force __be32)(__u32)(x))
+#define __constant_ntohl(x) ((__force __u32)(__be32)(x))
+#define __constant_htons(x) ((__force __be16)(__u16)(x))
+#define __constant_ntohs(x) ((__force __u16)(__be16)(x))
+#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
+#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
+#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
+#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
+#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
+#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
+#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
+#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
+#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
+#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
+#define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
+#define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
+#define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+ return (__force __le64)__swab64p(p);
+}
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+ return __swab64p((__u64 *)p);
+}
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+ return (__force __le32)__swab32p(p);
+}
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+ return __swab32p((__u32 *)p);
+}
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+ return (__force __le16)__swab16p(p);
+}
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+ return __swab16p((__u16 *)p);
+}
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+ return (__force __be64)*p;
+}
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+ return (__force __u64)*p;
+}
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+ return (__force __be32)*p;
+}
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+ return (__force __u32)*p;
+}
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+ return (__force __be16)*p;
+}
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+ return (__force __u16)*p;
+}
#define __cpu_to_le64s(x) __swab64s((x))
#define __le64_to_cpus(x) __swab64s((x))
#define __cpu_to_le32s(x) __swab32s((x))
#define __le32_to_cpus(x) __swab32s((x))
#define __cpu_to_le16s(x) __swab16s((x))
#define __le16_to_cpus(x) __swab16s((x))
-#define __cpu_to_be64s(x) do {} while (0)
-#define __be64_to_cpus(x) do {} while (0)
-#define __cpu_to_be32s(x) do {} while (0)
-#define __be32_to_cpus(x) do {} while (0)
-#define __cpu_to_be16s(x) do {} while (0)
-#define __be16_to_cpus(x) do {} while (0)
+#define __cpu_to_be64s(x) do { (void)(x); } while (0)
+#define __be64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be32s(x) do { (void)(x); } while (0)
+#define __be32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be16s(x) do { (void)(x); } while (0)
+#define __be16_to_cpus(x) do { (void)(x); } while (0)
+#ifdef __KERNEL__
#include <linux/byteorder/generic.h>
+#endif
#endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */
#endif
#define __BYTE_ORDER __LITTLE_ENDIAN
+#include <linux/compiler.h>
+#include <linux/types.h>
#include <linux/byteorder/swab.h>
-#define __constant_htonl(x) ___constant_swab32((x))
-#define __constant_ntohl(x) ___constant_swab32((x))
-#define __constant_htons(x) ___constant_swab16((x))
-#define __constant_ntohs(x) ___constant_swab16((x))
-#define __constant_cpu_to_le64(x) ((__u64)(x))
-#define __constant_le64_to_cpu(x) ((__u64)(x))
-#define __constant_cpu_to_le32(x) ((__u32)(x))
-#define __constant_le32_to_cpu(x) ((__u32)(x))
-#define __constant_cpu_to_le16(x) ((__u16)(x))
-#define __constant_le16_to_cpu(x) ((__u16)(x))
-#define __constant_cpu_to_be64(x) ___constant_swab64((x))
-#define __constant_be64_to_cpu(x) ___constant_swab64((x))
-#define __constant_cpu_to_be32(x) ___constant_swab32((x))
-#define __constant_be32_to_cpu(x) ___constant_swab32((x))
-#define __constant_cpu_to_be16(x) ___constant_swab16((x))
-#define __constant_be16_to_cpu(x) ___constant_swab16((x))
-#define __cpu_to_le64(x) ((__u64)(x))
-#define __le64_to_cpu(x) ((__u64)(x))
-#define __cpu_to_le32(x) ((__u32)(x))
-#define __le32_to_cpu(x) ((__u32)(x))
-#define __cpu_to_le16(x) ((__u16)(x))
-#define __le16_to_cpu(x) ((__u16)(x))
-#define __cpu_to_be64(x) __swab64((x))
-#define __be64_to_cpu(x) __swab64((x))
-#define __cpu_to_be32(x) __swab32((x))
-#define __be32_to_cpu(x) __swab32((x))
-#define __cpu_to_be16(x) __swab16((x))
-#define __be16_to_cpu(x) __swab16((x))
-#define __cpu_to_le64p(x) (*(__u64*)(x))
-#define __le64_to_cpup(x) (*(__u64*)(x))
-#define __cpu_to_le32p(x) (*(__u32*)(x))
-#define __le32_to_cpup(x) (*(__u32*)(x))
-#define __cpu_to_le16p(x) (*(__u16*)(x))
-#define __le16_to_cpup(x) (*(__u16*)(x))
-#define __cpu_to_be64p(x) __swab64p((x))
-#define __be64_to_cpup(x) __swab64p((x))
-#define __cpu_to_be32p(x) __swab32p((x))
-#define __be32_to_cpup(x) __swab32p((x))
-#define __cpu_to_be16p(x) __swab16p((x))
-#define __be16_to_cpup(x) __swab16p((x))
-#define __cpu_to_le64s(x) do {} while (0)
-#define __le64_to_cpus(x) do {} while (0)
-#define __cpu_to_le32s(x) do {} while (0)
-#define __le32_to_cpus(x) do {} while (0)
-#define __cpu_to_le16s(x) do {} while (0)
-#define __le16_to_cpus(x) do {} while (0)
+#define __constant_htonl(x) ((__force __be32)___constant_swab32((x)))
+#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x))
+#define __constant_htons(x) ((__force __be16)___constant_swab16((x)))
+#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x))
+#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x))
+#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x))
+#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x)))
+#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x)))
+#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x)))
+#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
+#define __le64_to_cpu(x) ((__force __u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__force __le16)(__u16)(x))
+#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__force __be64)__swab64((x)))
+#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__force __be32)__swab32((x)))
+#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
+#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x))
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+ return (__force __le64)*p;
+}
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+ return (__force __u64)*p;
+}
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+ return (__force __le32)*p;
+}
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+ return (__force __u32)*p;
+}
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+ return (__force __le16)*p;
+}
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+ return (__force __u16)*p;
+}
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+ return (__force __be64)__swab64p(p);
+}
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+ return __swab64p((__u64 *)p);
+}
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+ return (__force __be32)__swab32p(p);
+}
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+ return __swab32p((__u32 *)p);
+}
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+ return (__force __be16)__swab16p(p);
+}
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+ return __swab16p((__u16 *)p);
+}
+#define __cpu_to_le64s(x) do { (void)(x); } while (0)
+#define __le64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le32s(x) do { (void)(x); } while (0)
+#define __le32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le16s(x) do { (void)(x); } while (0)
+#define __le16_to_cpus(x) do { (void)(x); } while (0)
#define __cpu_to_be64s(x) __swab64s((x))
#define __be64_to_cpus(x) __swab64s((x))
#define __cpu_to_be32s(x) __swab32s((x))
#define __cpu_to_be16s(x) __swab16s((x))
#define __be16_to_cpus(x) __swab16s((x))
+#ifdef __KERNEL__
#include <linux/byteorder/generic.h>
+#endif
#endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */
{
return __arch__swab16(x);
}
-static __inline__ __u16 __swab16p(__u16 *x)
+static __inline__ __u16 __swab16p(const __u16 *x)
{
return __arch__swab16p(x);
}
{
return __arch__swab32(x);
}
-static __inline__ __u32 __swab32p(__u32 *x)
+static __inline__ __u32 __swab32p(const __u32 *x)
{
return __arch__swab32p(x);
}
return __arch__swab64(x);
# endif
}
-static __inline__ __u64 __swab64p(__u64 *x)
+static __inline__ __u64 __swab64p(const __u64 *x)
{
return __arch__swab64p(x);
}
#ifndef _LINUX_COMPAT_H_
#define _LINUX_COMPAT_H_
-#define __user
-#define __iomem
-
#define ndelay(x) udelay(1)
#define printk printf
#include <linux/compat.h>
#endif
+#include <linux/compiler.h>
+
struct erase_info_user {
uint32_t start;
uint32_t length;
#include <linux/types.h>
#endif
+#ifndef __CHECKER__
#undef offsetof
#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+#endif
#endif
#ifndef _LINUX_UNALIGNED_GENERIC_H
#define _LINUX_UNALIGNED_GENERIC_H
-/* define __force to nothing in U-Boot */
-#define __force
-
/*
* Cause a link-time error if we try an unaligned access other than
* 1,2,4 or 8 bytes long
+++ /dev/null
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Logic lh7a400-10 Card Engine CPLD interface
- */
-
-#ifndef __LPD7A400_CPLD_H_
-#define __LPD7A400_CPLD_H_
-
-
-/*
- * IO Controller Address and Register Definitions
- * - using LH7A400-10 Card Engine IO Controller Specification
- * (logic PN: 70000079)
- */
-
-/*------------------------------------------------------------------
- * Slow Peripherals (nCS6)
- */
-#define LPD7A400_CPLD_CF (0x60200000)
-#define LPD7A400_CPLD_ISA (0x60400000)
-
-/*------------------------------------------------------------------
- * Fast Peripherals (nCS7)
- *
- * The CPLD directs access to 0x70000000-0x701fffff to the onboard
- * ethernet controller
- */
-#define LPD7A400_CPLD_WLAN_BASE (0x70000000)
-
-/* All registers are 8 bit */
-#define LPD7A400_CPLD_CECTL_REG (0x70200000)
-#define LPD7A400_CPLD_SPIDATA_REG (0x70600000)
-#define LPD7A400_CPLD_SPICTL_REG (0x70800000)
-#define LPD7A400_CPLD_EEPSPI_REG (0x70a00000)
-#define LPD7A400_CPLD_INTMASK_REG (0x70c00000)
-#define LPD7A400_CPLD_MODE_REG (0x70e00000)
-#define LPD7A400_CPLD_FLASH_REG (0x71000000)
-#define LPD7A400_CPLD_PWRMG_REG (0x71200000)
-#define LPD7A400_CPLD_REV_REG (0x71400000)
-#define LPD7A400_CPLD_EXTGPIO_REG (0x71600000)
-#define LPD7A400_CPLD_GPIODATA_REG (0x71800000)
-#define LPD7A400_CPLD_GPIODIR_REG (0x71a00000)
-
-#define LPD7A400_CPLD_REGPTR (volatile u8*)
-
-/* Card Engine Control Register (section 3.1.2) */
-#define CECTL_SWINT (0x80) /* Software settable interrupt source
- (routed to uP PF3)
- 0 = generate interrupt, 1 = do not */
-#define CECTL_OCMSK (0x40) /* USB1 connection interrupt mask
- 0 = not masked, 1 = masked */
-#define CECTL_PDRV (0x20) /* PCC_nDRV output
- 0 = active, 1 = inactive */
-#define CECTL_USB1C (0x10) /* USB1 connection interrupt
- 0 = active, 1 = inactive */
-#define CECTL_USB1P (0x08) /* USB1 Power enable
- 0 = enabled, 1 = disabled */
-#define CECTL_AWKP (0x04) /* Auto-Wakeup enable
- 0 = enabled, 1 = disabled */
-#define CECTL_LCDV (0x02) /* LCD VEE enable
- 0 = disabled, 1 = enabled */
-#define CECTL_WLPE (0x01) /* Wired LAN power enable
- 0 = enabled, 1 = disabled */
-
-/* SPI Control Register (section 3.1.5) */
-#define SPICTL_SPLD (0x20) /* SPI load (R)
- 0 = data reg. has not been loaded, shift
- count has not been reset
- 1 = data reg. loaded, shift count reset */
-#define SPICTL_SPST (0x10) /* SPI start (RW)
- 0 = don't load data reg. and reset shift count
- 1 = ready to load data reg and reset shift count */
-#define SPICTL_SPDN (0x08) /* SPI done (R)
- 0 = not done
- 1 = access done */
-#define SPICTL_SPRW (0x04) /* SPI read/write (RW)
- 0 = SPI write access
- 1 = SPI read access */
-#define SPICTL_STCS (0x02) /* SPI touch chip select (RW)
- 0 = not selected
- 1 = selected */
-#define SPICTL_SCCS (0x01) /* SPI CODEC chip select (RW) {not used}
- 0 = not selected
- 1 = selected */
-
-/* EEPROM SPI Interface Register (section 3.1.6) */
-#define EEPSPI_EECS (0x08) /* EEPROM chip select (RW)
- 0 = not selected
- 1 = selected */
-#define EEPSPI_EECK (0x04) /* EEPROM SPI clock (RW) */
-#define EEPSPI_EETX (0x02) /* EEPROM SPI tx data (RW) */
-#define EEPSPI_EERX (0x01) /* EEPROM SPI rx data (R) */
-
-/* Interrupt/Mask Register (section 3.1.7) */
-#define INTMASK_CMSK (0x80) /* CPLD_nIRQD interrupt mask (RW)
- 0 = not masked
- 1 = masked */
-#define INTMASK_CIRQ (0x40) /* interrupt signal to CPLD (R)
- 0 = interrupt active
- 1 = no interrupt */
-#define INTMASK_PIRQ (0x10) /* legacy, no effect */
-#define INTMASK_TMSK (0x08) /* Touch chip interrupt mask (RW)
- 0 = not masked
- 1 = masked */
-#define INTMASK_WMSK (0x04) /* Wired LAN interrupt mask (RW)
- 0 = not masked
- 1 = masked */
-#define INTMASK_TIRQ (0x02) /* Touch chip interrupt request (R)
- 0 = interrupt active
- 1 = no interrupt */
-#define INTMASK_WIRQ (0x01) /* Wired LAN interrupt request (R)
- 0 = interrupt active
- 1 = no interrupt */
-
-/* Mode Register (section 3.1.8) */
-#define MODE_VS1 (0x80) /* PCMCIA Voltage Sense 1 input (PCC_VS1) (R)
- 0 = active slot VS1 pin is low
- 1 = active slot VS1 pin is high */
-#define MODE_CD2 (0x40) /* PCMCIA Card Detect 2 input (PCC_nCD2) (R)
- 0 = active slot CD2 is low
- 1 = active slot CD2 is high */
-#define MODE_IOIS16 (0x20) /* PCMCIA IOIS16 input (PCC_nIOIS16) (R)
- 0 = 16 bit access area
- 1 = 8 bit access area */
-#define MODE_CD1 (0x10) /* PCMCIA Card Detect 1 input (PCC_nCD1) (R)
- 0 = active slot CD1 is low
- 1 = active slot CD1 is high */
-#define MODE_upMODE3 (0x08) /* Mode Pin 3 (R)
- 0 = off-board boot device
- 1 = on-board boot device (flash) */
-#define MODE_upMODE2 (0x04) /* Mode Pin 2 (R) (LH7A400 Little Endian only)
- 0 = big endian
- 1 = little endian */
-#define MODE_upMODE1 (0x02) /* Mode Pin 1 and Mode Pin 2 (R) */
-#define MODE_upMODE0 (0x01) /* - bus width at boot */
-
-
-/* Flash Register (section 3.1.9) */
-#define FLASH_FPOP (0x08) /* Flash populated (RW)
- 0 = populated, 1 = not */
-#define FLASH_FST2 (0x04) /* Flash status (R) (RY/BY# pin for upper 16 bit chip
- 0 = busy, 1 = ready */
-#define FLASH_FST1 (0x02) /* Flash status (R) (RY/BY# pin for lower 16 bit chip
- 0 = busy, 1 = ready */
-#define FLASH_FPEN (0x01) /* Flash program enable (RW)
- 0 = flash write protected
- 1 = programming enabled */
-
-/* Power Management Register (section 3.1.10)
- * - when either of these is low an unmaskable interrupt to cpu
- * is generated
- */
-#define PWRMG_STBY (0x10) /* state of nSTANDBY signal to CPLD (R)
- 0 = low, 1 = high */
-#define PWRMG_SPND (0x04) /* state of nSUSPEND signal to CPLD (R)
- 0 = low, 1 = high */
-
-
-/* Extended GPIO Register (section 3.1.12) */
-#define EXTGPIO_STATUS1 (0x04) /* Status 1 output (RW) (uP_STATUS_1)
- 0 = set pin low, 1 = set pin high */
-#define EXTGPIO_STATUS2 (0x02) /* Status 2 output (RW) (uP_STATUS_2)
- 0 = set pin low, 1 = set pin high */
-#define EXTGPIO_GPIO1 (0x01) /* General purpose output (RW) (CPLD_GPIO_1)
- 0 = set pin low, 1 = set pin high */
-
-/* GPIO Data Register (section 3.1.13) */
-#define GPIODATA_GPIO2 (0x01) /* General purpose input/output (RW) (CPLD_GPIO_2)
- 0 = set low (output) / read low (input)
- 1 = set high (output) / read high (input) */
-
-/* GPIO Direction Register (section 3.1.14) */
-#define GPIODIR_GPDR0 (0x01) /* GPIO2 direction (RW)
- 0 = output, 1 = input */
-
-#endif /* __LH7A400_H__ */
#define SPR_FAMILY(spridr) ((spridr & 0xFFF00000) >> 20)
#define SPR_8308 0x8100
+#define SPR_8309 0x8110
#define SPR_831X_FAMILY 0x80B
#define SPR_8311 0x80B2
#define SPR_8313 0x80B0
#define SICRH_TSOBI1_V2P5 (1 << 1)
#define SICRH_TSOBI2_V3P3 (0 << 0)
#define SICRH_TSOBI2_V2P5 (1 << 0)
+
+#elif defined(CONFIG_MPC8309)
+/* SICR_1 */
+#define SICR_1_UART1_UART1S (0 << (30-2))
+#define SICR_1_UART1_UART1RTS (1 << (30-2))
+#define SICR_1_I2C_I2C (0 << (30-4))
+#define SICR_1_I2C_CKSTOP (1 << (30-4))
+#define SICR_1_IRQ_A_IRQ (0 << (30-6))
+#define SICR_1_IRQ_A_MCP (1 << (30-6))
+#define SICR_1_IRQ_B_IRQ (0 << (30-8))
+#define SICR_1_IRQ_B_CKSTOP (1 << (30-8))
+#define SICR_1_GPIO_A_GPIO (0 << (30-10))
+#define SICR_1_GPIO_A_SD (2 << (30-10))
+#define SICR_1_GPIO_A_DDR (3 << (30-10))
+#define SICR_1_GPIO_B_GPIO (0 << (30-12))
+#define SICR_1_GPIO_B_SD (2 << (30-12))
+#define SICR_1_GPIO_B_QE (3 << (30-12))
+#define SICR_1_GPIO_C_GPIO (0 << (30-14))
+#define SICR_1_GPIO_C_CAN (1 << (30-14))
+#define SICR_1_GPIO_C_DDR (2 << (30-14))
+#define SICR_1_GPIO_C_LCS (3 << (30-14))
+#define SICR_1_GPIO_D_GPIO (0 << (30-16))
+#define SICR_1_GPIO_D_CAN (1 << (30-16))
+#define SICR_1_GPIO_D_DDR (2 << (30-16))
+#define SICR_1_GPIO_D_LCS (3 << (30-16))
+#define SICR_1_GPIO_E_GPIO (0 << (30-18))
+#define SICR_1_GPIO_E_CAN (1 << (30-18))
+#define SICR_1_GPIO_E_DDR (2 << (30-18))
+#define SICR_1_GPIO_E_LCS (3 << (30-18))
+#define SICR_1_GPIO_F_GPIO (0 << (30-20))
+#define SICR_1_GPIO_F_CAN (1 << (30-20))
+#define SICR_1_GPIO_F_CK (2 << (30-20))
+#define SICR_1_USB_A_USBDR (0 << (30-22))
+#define SICR_1_USB_A_UART2S (1 << (30-22))
+#define SICR_1_USB_B_USBDR (0 << (30-24))
+#define SICR_1_USB_B_UART2S (1 << (30-24))
+#define SICR_1_USB_B_UART2RTS (2 << (30-24))
+#define SICR_1_USB_C_USBDR (0 << (30-26))
+#define SICR_1_USB_C_QE_EXT (3 << (30-26))
+#define SICR_1_FEC1_FEC1 (0 << (30-28))
+#define SICR_1_FEC1_GTM (1 << (30-28))
+#define SICR_1_FEC1_GPIO (2 << (30-28))
+#define SICR_1_FEC2_FEC2 (0 << (30-30))
+#define SICR_1_FEC2_GTM (1 << (30-30))
+#define SICR_1_FEC2_GPIO (2 << (30-30))
+/* SICR_2 */
+#define SICR_2_FEC3_FEC3 (0 << (30-0))
+#define SICR_2_FEC3_TMR (1 << (30-0))
+#define SICR_2_FEC3_GPIO (2 << (30-0))
+#define SICR_2_HDLC1_A_HDLC1 (0 << (30-2))
+#define SICR_2_HDLC1_A_GPIO (1 << (30-2))
+#define SICR_2_HDLC1_A_TDM1 (2 << (30-2))
+#define SICR_2_ELBC_A_LA (0 << (30-4))
+#define SICR_2_ELBC_B_LCLK (0 << (30-6))
+#define SICR_2_HDLC2_A_HDLC2 (0 << (30-8))
+#define SICR_2_HDLC2_A_GPIO (0 << (30-8))
+#define SICR_2_HDLC2_A_TDM2 (0 << (30-8))
+/* bits 10-11 unused */
+#define SICR_2_USB_D_USBDR (0 << (30-12))
+#define SICR_2_USB_D_GPIO (2 << (30-12))
+#define SICR_2_USB_D_QE_BRG (3 << (30-12))
+#define SICR_2_PCI_PCI (0 << (30-14))
+#define SICR_2_PCI_CPCI_HS (2 << (30-14))
+#define SICR_2_HDLC1_B_HDLC1 (0 << (30-16))
+#define SICR_2_HDLC1_B_GPIO (1 << (30-16))
+#define SICR_2_HDLC1_B_QE_BRG (2 << (30-16))
+#define SICR_2_HDLC1_B_TDM1 (3 << (30-16))
+#define SICR_2_HDLC1_C_HDLC1 (0 << (30-18))
+#define SICR_2_HDLC1_C_GPIO (1 << (30-18))
+#define SICR_2_HDLC1_C_TDM1 (2 << (30-18))
+#define SICR_2_HDLC2_B_HDLC2 (0 << (30-20))
+#define SICR_2_HDLC2_B_GPIO (1 << (30-20))
+#define SICR_2_HDLC2_B_QE_BRG (2 << (30-20))
+#define SICR_2_HDLC2_B_TDM2 (3 << (30-20))
+#define SICR_2_HDLC2_C_HDLC2 (0 << (30-22))
+#define SICR_2_HDLC2_C_GPIO (1 << (30-22))
+#define SICR_2_HDLC2_C_TDM2 (2 << (30-22))
+#define SICR_2_HDLC2_C_QE_BRG (3 << (30-22))
+#define SICR_2_QUIESCE_B (0 << (30-24))
+
#endif
/*
#define HRCWL_SVCOD_DIV_8 0x10000000
#define HRCWL_SVCOD_DIV_2 0x20000000
#define HRCWL_SVCOD_DIV_1 0x30000000
+#elif defined(CONFIG_MPC8309)
+
+#define HRCWL_CEVCOD 0x000000C0
+#define HRCWL_CEVCOD_SHIFT 6
+/*
+ * According to Errata MPC8309RMAD, Rev. 0.2, 9/2012
+ * these are different than with 8360, 832x
+ */
+#define HRCWL_CE_PLL_VCO_DIV_2 0x00000000
+#define HRCWL_CE_PLL_VCO_DIV_4 0x00000040
+#define HRCWL_CE_PLL_VCO_DIV_8 0x00000080
+
+#define HRCWL_CEPDF 0x00000020
+#define HRCWL_CEPDF_SHIFT 5
+#define HRCWL_CE_PLL_DIV_1X1 0x00000000
+#define HRCWL_CE_PLL_DIV_2X1 0x00000020
+
+#define HRCWL_CEPMF 0x0000001F
+#define HRCWL_CEPMF_SHIFT 0
+#define HRCWL_CE_TO_PLL_1X16_ 0x00000000
+#define HRCWL_CE_TO_PLL_1X2 0x00000002
+#define HRCWL_CE_TO_PLL_1X3 0x00000003
+#define HRCWL_CE_TO_PLL_1X4 0x00000004
+#define HRCWL_CE_TO_PLL_1X5 0x00000005
+#define HRCWL_CE_TO_PLL_1X6 0x00000006
+#define HRCWL_CE_TO_PLL_1X7 0x00000007
+#define HRCWL_CE_TO_PLL_1X8 0x00000008
+#define HRCWL_CE_TO_PLL_1X9 0x00000009
+#define HRCWL_CE_TO_PLL_1X10 0x0000000A
+#define HRCWL_CE_TO_PLL_1X11 0x0000000B
+#define HRCWL_CE_TO_PLL_1X12 0x0000000C
+#define HRCWL_CE_TO_PLL_1X13 0x0000000D
+#define HRCWL_CE_TO_PLL_1X14 0x0000000E
+#define HRCWL_CE_TO_PLL_1X15 0x0000000F
+#define HRCWL_CE_TO_PLL_1X16 0x00000010
+#define HRCWL_CE_TO_PLL_1X17 0x00000011
+#define HRCWL_CE_TO_PLL_1X18 0x00000012
+#define HRCWL_CE_TO_PLL_1X19 0x00000013
+#define HRCWL_CE_TO_PLL_1X20 0x00000014
+#define HRCWL_CE_TO_PLL_1X21 0x00000015
+#define HRCWL_CE_TO_PLL_1X22 0x00000016
+#define HRCWL_CE_TO_PLL_1X23 0x00000017
+#define HRCWL_CE_TO_PLL_1X24 0x00000018
+#define HRCWL_CE_TO_PLL_1X25 0x00000019
+#define HRCWL_CE_TO_PLL_1X26 0x0000001A
+#define HRCWL_CE_TO_PLL_1X27 0x0000001B
+#define HRCWL_CE_TO_PLL_1X28 0x0000001C
+#define HRCWL_CE_TO_PLL_1X29 0x0000001D
+#define HRCWL_CE_TO_PLL_1X30 0x0000001E
+#define HRCWL_CE_TO_PLL_1X31 0x0000001F
+
+#define HRCWL_SVCOD 0x30000000
+#define HRCWL_SVCOD_SHIFT 28
+#define HRCWL_SVCOD_DIV_2 0x00000000
+#define HRCWL_SVCOD_DIV_4 0x10000000
+#define HRCWL_SVCOD_DIV_8 0x20000000
+#define HRCWL_SVCOD_DIV_1 0x30000000
#endif
/*
#define SCCR_SATACM_1 0x00000055
#define SCCR_SATACM_2 0x000000aa
#define SCCR_SATACM_3 0x000000ff
+#elif defined(CONFIG_MPC8309)
+/* SCCR bits - MPC8309 specific */
+#define SCCR_SDHCCM 0x0c000000
+#define SCCR_SDHCCM_SHIFT 26
+#define SCCR_SDHCCM_0 0x00000000
+#define SCCR_SDHCCM_1 0x04000000
+#define SCCR_SDHCCM_2 0x08000000
+#define SCCR_SDHCCM_3 0x0c000000
+
+#define SCCR_USBDRCM 0x00c00000
+#define SCCR_USBDRCM_SHIFT 22
+#define SCCR_USBDRCM_0 0x00000000
+#define SCCR_USBDRCM_1 0x00400000
+#define SCCR_USBDRCM_2 0x00800000
+#define SCCR_USBDRCM_3 0x00c00000
#endif
#define SCCR_PCIEXP1CM 0x00300000
*/
#define CSCONFIG_EN 0x80000000
#define CSCONFIG_AP 0x00800000
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x)
+#if defined(CONFIG_MPC830x) || defined(CONFIG_MPC831x)
#define CSCONFIG_ODT_RD_NEVER 0x00000000
#define CSCONFIG_ODT_RD_ONLY_CURRENT 0x00100000
#define CSCONFIG_ODT_RD_ONLY_OTHER_CS 0x00200000
extern int eth_unregister(struct eth_device *dev);/* Remove network device */
extern void eth_try_another(int first_restart); /* Change the device */
extern void eth_set_current(void); /* set nterface to ethcur var */
+
/* get the current device MAC */
+extern struct eth_device *eth_current;
+
static inline __attribute__((always_inline))
struct eth_device *eth_get_dev(void)
{
- extern struct eth_device *eth_current;
-
return eth_current;
}
extern struct eth_device *eth_get_dev_by_name(const char *devname);
NETLOOP_SUCCESS,
NETLOOP_FAIL
};
+extern enum net_loop_state net_state;
+
static inline void net_set_state(enum net_loop_state state)
{
- extern enum net_loop_state net_state;
-
debug_cond(DEBUG_INT_STATE, "--- NetState set to %d\n", state);
net_state = state;
}
# define CONFIG_PCMCIA_SLOT_B
#elif defined(CONFIG_ICU862) /* The ICU862 use SLOT_B */
# define CONFIG_PCMCIA_SLOT_B
-#elif defined(CONFIG_C2MON) /* The C2MON use SLOT_B */
-# define CONFIG_PCMCIA_SLOT_B
#elif defined(CONFIG_R360MPI) /* The R360MPI use SLOT_B */
# define CONFIG_PCMCIA_SLOT_B
#elif defined(CONFIG_ATC) /* The ATC use SLOT_A */
#define SCSI_READ6 0x08 /* Read 6-byte (MANDATORY) */
#define SCSI_READ10 0x28 /* Read 10-byte (MANDATORY) */
#define SCSI_RD_CAPAC 0x25 /* Read Capacity (MANDATORY) */
+#define SCSI_RD_CAPAC10 SCSI_RD_CAPAC /* Read Capacity (10) */
+#define SCSI_RD_CAPAC16 0x9e /* Read Capacity (16) */
#define SCSI_RD_DEFECT 0x37 /* Read Defect Data (O) */
#define SCSI_READ_LONG 0x3E /* Read Long (O) */
#define SCSI_REASS_BLK 0x07 /* Reassign Blocks (O) */
void scsi_init(void);
void scsi_scan(int mode);
+/** @return the number of scsi disks */
+int scsi_get_disk_count(void);
#define SCSI_IDENTIFY 0xC0 /* not used */
#define SDHCI_QUIRK_NO_HISPD_BIT (1 << 3)
#define SDHCI_QUIRK_BROKEN_VOLTAGE (1 << 4)
#define SDHCI_QUIRK_NO_CD (1 << 5)
+#define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6)
/* to make gcc happy */
struct sdhci_host;
struct serial_device *next;
};
+void default_serial_puts(const char *s);
+
extern struct serial_device serial_smc_device;
extern struct serial_device serial_scc_device;
extern struct serial_device *default_serial_console(void);
# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-/***** ETX_094 ********************************************************/
-#elif defined(CONFIG_ETX094)
-
-# define STATUS_LED_PAR im_ioport.iop_pdpar
-# define STATUS_LED_DIR im_ioport.iop_pddir
-# undef STATUS_LED_ODR
-# define STATUS_LED_DAT im_ioport.iop_pddat
-
-# define STATUS_LED_BIT 0x00000001
-# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE STATUS_LED_BLINKING
-
-# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
-
-# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-
/***** GEN860T *********************************************************/
#elif defined(CONFIG_GEN860T)
# define STATUS_LED_GREEN 1
# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */
-/***** LANTEC *********************************************************/
-#elif defined(CONFIG_LANTEC)
-
-# define STATUS_LED_PAR im_ioport.iop_pdpar
-# define STATUS_LED_DIR im_ioport.iop_pddir
-# undef STATUS_LED_ODR
-# define STATUS_LED_DAT im_ioport.iop_pddat
-
-# if CONFIG_LATEC < 2
-# define STATUS_LED_BIT 0x1000
-# else
-# define STATUS_LED_BIT 0x0800
-# endif
-# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE STATUS_LED_BLINKING
-
-# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
-
-# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-
/***** ICU862 ********************************************************/
#elif defined(CONFIG_ICU862)
#define TWL4030_PM_MASTER_SW_EVENTS_DEVSLP (1 << 1)
#define TWL4030_PM_MASTER_SW_EVENTS_DEVOFF (1 << 0)
+/* Power bus message definitions */
+
+/* The TWL4030/5030 splits its power-management resources (the various
+ * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
+ * P3. These groups can then be configured to transition between sleep, wait-on
+ * and active states by sending messages to the power bus. See Section 5.4.2
+ * Power Resources of TWL4030 TRM
+ */
+
+/* Processor groups */
+#define DEV_GRP_NULL 0x0
+#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */
+#define DEV_GRP_P2 0x2 /* P2: all Modem devices */
+#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */
+
+/* Resource groups */
+#define RES_GRP_RES 0x0 /* Reserved */
+#define RES_GRP_PP 0x1 /* Power providers */
+#define RES_GRP_RC 0x2 /* Reset and control */
+#define RES_GRP_PP_RC 0x3
+#define RES_GRP_PR 0x4 /* Power references */
+#define RES_GRP_PP_PR 0x5
+#define RES_GRP_RC_PR 0x6
+#define RES_GRP_ALL 0x7 /* All resource groups */
+
+#define RES_TYPE2_R0 0x0
+
+#define RES_TYPE_ALL 0x7
+
+/* Resource states */
+#define RES_STATE_WRST 0xF
+#define RES_STATE_ACTIVE 0xE
+#define RES_STATE_SLEEP 0x8
+#define RES_STATE_OFF 0x0
+
+/* Power resources */
+
+/* Power providers */
+#define RES_VAUX1 1
+#define RES_VAUX2 2
+#define RES_VAUX3 3
+#define RES_VAUX4 4
+#define RES_VMMC1 5
+#define RES_VMMC2 6
+#define RES_VPLL1 7
+#define RES_VPLL2 8
+#define RES_VSIM 9
+#define RES_VDAC 10
+#define RES_VINTANA1 11
+#define RES_VINTANA2 12
+#define RES_VINTDIG 13
+#define RES_VIO 14
+#define RES_VDD1 15
+#define RES_VDD2 16
+#define RES_VUSB_1V5 17
+#define RES_VUSB_1V8 18
+#define RES_VUSB_3V1 19
+#define RES_VUSBCP 20
+#define RES_REGEN 21
+/* Reset and control */
+#define RES_NRES_PWRON 22
+#define RES_CLKEN 23
+#define RES_SYSEN 24
+#define RES_HFCLKOUT 25
+#define RES_32KCLKOUT 26
+#define RES_RESET 27
+/* Power Reference */
+#define RES_Main_Ref 28
+
+#define TOTAL_RESOURCES 28
+/*
+ * Power Bus Message Format ... these can be sent individually by Linux,
+ * but are usually part of downloaded scripts that are run when various
+ * power events are triggered.
+ *
+ * Broadcast Message (16 Bits):
+ * DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4]
+ * RES_STATE[3:0]
+ *
+ * Singular Message (16 Bits):
+ * DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0]
+ */
+
+#define MSG_BROADCAST(devgrp, grp, type, type2, state) \
+ ((devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \
+ | (type) << 4 | (state))
+
+#define MSG_SINGULAR(devgrp, id, state) \
+ ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state))
+
+#define MSG_BROADCAST_ALL(devgrp, state) \
+ ((devgrp) << 5 | (state))
+
+#define MSG_BROADCAST_REF MSG_BROADCAST_ALL
+#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL
+#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL
+
/* Power Managment Receiver */
#define TWL4030_PM_RECEIVER_SC_CONFIG 0x5B
#define TWL4030_PM_RECEIVER_SC_DETECT1 0x5C
#define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03
#define TWL4030_PM_RECEIVER_VMMC1_VSEL_30 0x02
#define TWL4030_PM_RECEIVER_VMMC1_VSEL_32 0x03
+#define TWL4030_PM_RECEIVER_VSIM_VSEL_18 0x03
/* Device Selection in PM Receiver Module */
#define TWL4030_PM_RECEIVER_DEV_GRP_P1 0x20
#define Z_DEFLATED 8
/* The deflate compression method (the only one supported in this version) */
-#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
+#define Z_NULL (void *)0 /* for initializing zalloc, zfree, opaque */
/* basic functions */
SOBJS =
-COBJS-libfdt += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o
+COBJS-libfdt += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o fdt_empty_tree.o
COBJS-$(CONFIG_OF_LIBFDT) += $(COBJS-libfdt)
COBJS-$(CONFIG_FIT) += $(COBJS-libfdt)
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2012 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+int fdt_create_empty_tree(void *buf, int bufsize)
+{
+ int err;
+
+ err = fdt_create(buf, bufsize);
+ if (err)
+ return err;
+
+ err = fdt_finish_reservemap(buf);
+ if (err)
+ return err;
+
+ err = fdt_begin_node(buf, "");
+ if (err)
+ return err;
+
+ err = fdt_end_node(buf);
+ if (err)
+ return err;
+
+ err = fdt_finish(buf);
+ if (err)
+ return err;
+
+ return fdt_open_into(buf, buf, bufsize);
+}
+
return 0;
}
+int fdt_appendprop(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len)
+{
+ struct fdt_property *prop;
+ int err, oldlen, newlen;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen);
+ if (prop) {
+ newlen = len + oldlen;
+ err = _fdt_splice_struct(fdt, prop->data,
+ FDT_TAGALIGN(oldlen),
+ FDT_TAGALIGN(newlen));
+ if (err)
+ return err;
+ prop->len = cpu_to_fdt32(newlen);
+ memcpy(prop->data + oldlen, val, len);
+ } else {
+ err = _fdt_add_property(fdt, nodeoffset, name, len, &prop);
+ if (err)
+ return err;
+ memcpy(prop->data, val, len);
+ }
+ return 0;
+}
+
int fdt_delprop(void *fdt, int nodeoffset, const char *name)
{
struct fdt_property *prop;
/* some reluctance to put this into a new limits.h, so it is here */
#define INT_MAX ((int)(~0U>>1))
-const char hex_asc[] = "0123456789abcdef";
+static const char hex_asc[] = "0123456789abcdef";
#define hex_asc_lo(x) hex_asc[((x) & 0x0f)]
#define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4]
{
int len, i;
- if (s == 0)
+ if (s == NULL)
s = "<NULL>";
len = strnlen(s, precision);
static char *pointer(const char *fmt, char *buf, char *end, void *ptr,
int field_width, int precision, int flags)
{
+ /*
+ * Being a boot loader, we explicitly allow pointers to
+ * (physical) address null.
+ */
+#if 0
if (!ptr)
return string(buf, end, "(null)", field_width, precision,
flags);
+#endif
#ifdef CONFIG_CMD_NET
switch (*fmt) {
#endif
/* ========================================================================= */
-uLong ZEXPORT adler32(adler, buf, len)
- uLong adler;
- const Bytef *buf;
- uInt len;
+uLong ZEXPORT adler32(uLong adler, const Bytef *buf, uInt len)
{
unsigned long sum2;
unsigned n;
requires strm->avail_out >= 258 for each loop to avoid checking for
output space.
*/
-void inflate_fast(strm, start)
-z_streamp strm;
-unsigned start; /* inflate()'s starting value for strm->avail_out */
+void inflate_fast(z_streamp strm, unsigned start)
+/* start: inflate()'s starting value for strm->avail_out */
{
struct inflate_state FAR *state;
unsigned char FAR *in; /* local strm->next_in */
local void fixedtables OF((struct inflate_state FAR *state));
local int updatewindow OF((z_streamp strm, unsigned out));
-int ZEXPORT inflateReset(strm)
-z_streamp strm;
+int ZEXPORT inflateReset(z_streamp strm)
{
struct inflate_state FAR *state;
return Z_OK;
}
-int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
-z_streamp strm;
-int windowBits;
-const char *version;
-int stream_size;
+int ZEXPORT inflateInit2_(z_streamp strm, int windowBits, const char *version,
+ int stream_size)
{
struct inflate_state FAR *state;
return inflateReset(strm);
}
-int ZEXPORT inflateInit_(strm, version, stream_size)
-z_streamp strm;
-const char *version;
-int stream_size;
+int ZEXPORT inflateInit_(z_streamp strm, const char *version, int stream_size)
{
return inflateInit2_(strm, DEF_WBITS, version, stream_size);
}
-local void fixedtables(state)
-struct inflate_state FAR *state;
+local void fixedtables(struct inflate_state FAR *state)
{
state->lencode = lenfix;
state->lenbits = 9;
output will fall in the output data, making match copies simpler and faster.
The advantage may be dependent on the size of the processor's data caches.
*/
-local int updatewindow(strm, out)
-z_streamp strm;
-unsigned out;
+local int updatewindow(z_streamp strm, unsigned out)
{
struct inflate_state FAR *state;
unsigned copy, dist;
when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it
will return Z_BUF_ERROR if it has not reached the end of the stream.
*/
-int ZEXPORT inflate(strm, flush)
-z_streamp strm;
-int flush;
+int ZEXPORT inflate(z_streamp strm, int flush)
{
struct inflate_state FAR *state;
unsigned char FAR *next; /* next input */
return ret;
}
-int ZEXPORT inflateEnd(strm)
-z_streamp strm;
+int ZEXPORT inflateEnd(z_streamp strm)
{
struct inflate_state FAR *state;
if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
table index bits. It will differ if the request is greater than the
longest code or if it is less than the shortest code.
*/
-int inflate_table(type, lens, codes, table, bits, work)
-codetype type;
-unsigned short FAR *lens;
-unsigned codes;
-code FAR * FAR *table;
-unsigned FAR *bits;
-unsigned short FAR *work;
+int inflate_table(codetype type, unsigned short FAR *lens, unsigned codes,
+ code FAR * FAR *table, unsigned FAR *bits,
+ unsigned short FAR *work)
{
unsigned len; /* a code's length in bits */
unsigned sym; /* index of code symbols */
extern void free OF((voidpf ptr));
#endif
-voidpf zcalloc (opaque, items, size)
- voidpf opaque;
- unsigned items;
- unsigned size;
+voidpf zcalloc(voidpf opaque, unsigned items, unsigned size)
{
if (opaque)
items += size - size; /* make compiler happy */
(voidpf)calloc(items, size);
}
-void zcfree (opaque, ptr, nb)
- voidpf opaque;
- voidpf ptr;
- unsigned nb;
+void zcfree(voidpf opaque, voidpf ptr, unsigned nb)
{
free(ptr);
if (opaque)
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
$(LDFLAGS) $(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_NAND_SPL
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
# create symbolic links for common files
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
$(LDFLAGS) $(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_NAND_SPL
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
# create symbolic links for common files
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
$(LDFLAGS) $(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_NAND_SPL
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
# create symbolic links for common files
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
$(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-Map $(nandobj)u-boot-spl.map \
-o $@
-$(nandobj)u-boot.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
#########################################################################
}
. = ALIGN(4);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = ALIGN(4);
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \
$(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_NAND_SPL
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
# create symbolic links for common files
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
$(LDFLAGS) $(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_NAND_SPL
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
# create symbolic links for common files
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
$(LDFLAGS) $(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_NAND_SPL
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
# create symbolic links for common files
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
$(LDFLAGS) $(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_NAND_SPL
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
# create symbolic links for common files
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
$(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-Map $(nandobj)u-boot-spl.map \
-o $@
-$(nandobj)u-boot.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
#########################################################################
}
. = ALIGN(4);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = ALIGN(4);
. = ALIGN(4);
.got : { *(.got) }
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
. = ALIGN(4);
#endif
IPaddr_t NetArpWaitPacketIP;
-IPaddr_t NetArpWaitReplyIP;
+static IPaddr_t NetArpWaitReplyIP;
/* MAC address of waiting packet's destination */
uchar *NetArpWaitPacketMAC;
int NetArpWaitTxPacketSize;
ulong NetArpWaitTimerStart;
int NetArpWaitTry;
-uchar *NetArpTxPacket; /* THE ARP transmit packet */
-uchar NetArpPacketBuf[PKTSIZE_ALIGN + PKTALIGN];
+static uchar *NetArpTxPacket; /* THE ARP transmit packet */
+static uchar NetArpPacketBuf[PKTSIZE_ALIGN + PKTALIGN];
void ArpInit(void)
{
int BootpTry;
#if defined(CONFIG_CMD_DHCP)
-dhcp_state_t dhcp_state = INIT;
-unsigned long dhcp_leasetime;
-IPaddr_t NetDHCPServerIP;
+static dhcp_state_t dhcp_state = INIT;
+static unsigned long dhcp_leasetime;
+static IPaddr_t NetDHCPServerIP;
static void DhcpHandler(uchar *pkt, unsigned dest, IPaddr_t sip, unsigned src,
unsigned len);
int NetTimeOffset;
#endif
-uchar PktBuf[(PKTBUFSRX+1) * PKTSIZE_ALIGN + PKTALIGN];
+static uchar PktBuf[(PKTBUFSRX+1) * PKTSIZE_ALIGN + PKTALIGN];
/* Receive packet */
uchar *NetRxPackets[PKTBUFSRX];
* Copyright 2000-2002 Wolfgang Denk, wd@denx.de
*/
-#if defined(CONFIG_CMD_PING)
-
#ifndef __PING_H__
#define __PING_H__
void ping_receive(struct ethernet_hdr *et, struct ip_udp_hdr *ip, int len);
#endif /* __PING_H__ */
-#endif
extern void TftpStartServer(void); /* Wait for incoming TFTP put */
#endif
+extern ulong TftpRRQTimeoutMSecs;
+extern int TftpRRQTimeoutCountMax;
+
/**********************************************************************/
#endif /* __TFTP_H__ */
immr->im_cpm.cp_scc[scc_index].scc_psmr = SCC_PSMR_ENCRC |
SCC_PSMR_NIB22 | SCC_PSMR_LPB;
-#if 0
- /*
- * Configure Ethernet TENA Signal
- */
-
-#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
- immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
- immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
-#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
- immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
- immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
-#else
-#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
-#endif
-
-#if defined(CONFIG_ADS) && defined(CONFIG_MPC860)
- /*
- * Port C is used to control the PHY,MC68160.
- */
- immr->im_ioport.iop_pcdir |=
- (PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL);
-
- immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL;
- immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL);
- *((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#endif /* MPC860ADS */
-
-#if defined(CONFIG_AMX860)
- /*
- * Port B is used to control the PHY,MC68160.
- */
- immr->im_cpm.cp_pbdir |=
- (PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
-
- immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
- immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
-
- immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
- immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
-#endif /* AMX860 */
-
-#endif /* 0 */
-
#ifdef CONFIG_RPXCLASSIC
*((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
*((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
*/
#if defined (CONFIG_FADS)
udelay (10000); /* wait 10 ms */
-#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
+#elif defined(CONFIG_RPXCLASSIC)
udelay (100000); /* wait 100 ms */
#endif
}
u-boot-spl.bin
u-boot-spl.lds
u-boot-spl.map
+u-boot.lst
$(shell $(LD) --version | \
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
-ifdef CONFIG_OMAP
$(OBJTREE)/MLO: $(obj)u-boot-spl.bin
$(OBJTREE)/tools/mkimage -T omapimage \
-a $(CONFIG_SPL_TEXT_BASE) -d $< $@
-endif
-ifdef CONFIG_AM33XX
-$(OBJTREE)/MLO: $(obj)u-boot-spl.bin
- $(OBJTREE)/tools/mkimage -T omapimage \
+
+$(OBJTREE)/MLO.byteswap: $(obj)u-boot-spl.bin
+ $(OBJTREE)/tools/mkimage -T omapimage -n byteswap \
-a $(CONFIG_SPL_TEXT_BASE) -d $< $@
-endif
ifneq ($(CONFIG_IMX_CONFIG),)
$(OBJTREE)/SPL: $(obj)u-boot-spl.bin
$(LIBS): depend
$(MAKE) -C $(SRCTREE)$(dir $(subst $(SPLTREE),,$@))
-$(obj)u-boot-spl.lds: $(LDSCRIPT) depend
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - < $< > $@
+# The following line expands into whole rule which generates u-boot.lst,
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(obj)u-boot.lst, $(LIBS)))
+$(obj)u-boot-spl.lds: $(LDSCRIPT) $(obj)u-boot.lst depend
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj). -ansi -D__ASSEMBLY__ -P - < $< > $@
depend: $(obj).depend
.PHONY: depend
/* obsolete_flag must be 0 to efficiently set it on NOR flash without erasing */
static unsigned char obsolete_flag = 0;
-
-static char default_environment[] = {
-#if defined(CONFIG_BOOTARGS)
- "bootargs=" CONFIG_BOOTARGS "\0"
-#endif
-#if defined(CONFIG_BOOTCOMMAND)
- "bootcmd=" CONFIG_BOOTCOMMAND "\0"
-#endif
-#if defined(CONFIG_RAMBOOTCOMMAND)
- "ramboot=" CONFIG_RAMBOOTCOMMAND "\0"
-#endif
-#if defined(CONFIG_NFSBOOTCOMMAND)
- "nfsboot=" CONFIG_NFSBOOTCOMMAND "\0"
-#endif
-#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
- "bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0"
-#endif
-#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0)
- "baudrate=" __stringify(CONFIG_BAUDRATE) "\0"
-#endif
-#ifdef CONFIG_LOADS_ECHO
- "loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0"
-#endif
-#ifdef CONFIG_ETHADDR
- "ethaddr=" __stringify(CONFIG_ETHADDR) "\0"
-#endif
-#ifdef CONFIG_ETH1ADDR
- "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"
-#endif
-#ifdef CONFIG_ETH2ADDR
- "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"
-#endif
-#ifdef CONFIG_ETH3ADDR
- "eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0"
-#endif
-#ifdef CONFIG_ETH4ADDR
- "eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0"
-#endif
-#ifdef CONFIG_ETH5ADDR
- "eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0"
-#endif
-#ifdef CONFIG_ETHPRIME
- "ethprime=" CONFIG_ETHPRIME "\0"
-#endif
-#ifdef CONFIG_IPADDR
- "ipaddr=" __stringify(CONFIG_IPADDR) "\0"
-#endif
-#ifdef CONFIG_SERVERIP
- "serverip=" __stringify(CONFIG_SERVERIP) "\0"
-#endif
-#ifdef CONFIG_SYS_AUTOLOAD
- "autoload=" CONFIG_SYS_AUTOLOAD "\0"
-#endif
-#ifdef CONFIG_ROOTPATH
- "rootpath=" CONFIG_ROOTPATH "\0"
-#endif
-#ifdef CONFIG_GATEWAYIP
- "gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0"
-#endif
-#ifdef CONFIG_NETMASK
- "netmask=" __stringify(CONFIG_NETMASK) "\0"
-#endif
-#ifdef CONFIG_HOSTNAME
- "hostname=" __stringify(CONFIG_HOSTNAME) "\0"
-#endif
-#ifdef CONFIG_BOOTFILE
- "bootfile=" CONFIG_BOOTFILE "\0"
-#endif
-#ifdef CONFIG_LOADADDR
- "loadaddr=" __stringify(CONFIG_LOADADDR) "\0"
-#endif
-#ifdef CONFIG_PREBOOT
- "preboot=" CONFIG_PREBOOT "\0"
-#endif
-#ifdef CONFIG_CLOCKS_IN_MHZ
- "clocks_in_mhz=" "1" "\0"
-#endif
-#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0)
- "pcidelay=" __stringify(CONFIG_PCI_BOOTDELAY) "\0"
-#endif
-#ifdef CONFIG_ENV_VARS_UBOOT_CONFIG
- "arch=" CONFIG_SYS_ARCH "\0"
- "cpu=" CONFIG_SYS_CPU "\0"
- "board=" CONFIG_SYS_BOARD "\0"
-#ifdef CONFIG_SYS_VENDOR
- "vendor=" CONFIG_SYS_VENDOR "\0"
-#endif
-#ifdef CONFIG_SYS_SOC
- "soc=" CONFIG_SYS_SOC "\0"
-#endif
-#endif
-#ifdef CONFIG_EXTRA_ENV_SETTINGS
- CONFIG_EXTRA_ENV_SETTINGS
-#endif
- "\0" /* Termimate struct environment data with 2 NULs */
-};
+#define DEFAULT_ENV_INSTANCE_STATIC
+#include <env_default.h>
static int flash_io (int mode);
static char *envmatch (char * s1, char * s2);
char *val = argv[i];
size_t val_len = strlen(val);
+ if (value)
+ value[len - 1] = ' ';
value = realloc(value, len + val_len + 1);
if (!value) {
fprintf(stderr,
memcpy(value + len, val, val_len);
len += val_len;
- value[len++] = ' ';
+ value[len++] = '\0';
}
- value[len - 1] = '\0';
fw_env_write(name, value);
return -1;
}
#ifdef DEBUG
- fprintf (stderr, "Read 0x%x bytes at 0x%llx\n",
- rc, blockstart + block_seek);
+ fprintf(stderr, "Read 0x%x bytes at 0x%llx on %s\n",
+ rc, blockstart + block_seek, DEVNAME(dev));
#endif
processed += readlen;
readlen = min (blocklen, count - processed);
if (write_total != rc)
return -1;
+#ifdef DEBUG
+ fprintf(stderr, "Preserving data ");
+ if (block_seek != 0)
+ fprintf(stderr, "0x%x - 0x%lx", 0, block_seek - 1);
+ if (block_seek + count != write_total) {
+ if (block_seek != 0)
+ fprintf(stderr, " and ");
+ fprintf(stderr, "0x%lx - 0x%x",
+ block_seek + count, write_total - 1);
+ }
+ fprintf(stderr, "\n");
+#endif
/* Overwrite the old environment */
memcpy (data + block_seek, buf, count);
} else {
}
#ifdef DEBUG
- printf ("Write 0x%x bytes at 0x%llx\n", erasesize, blockstart);
+ fprintf(stderr, "Write 0x%x bytes at 0x%llx\n", erasesize,
+ blockstart);
#endif
if (write (fd, data + processed, erasesize) != erasesize) {
fprintf (stderr, "Write error on %s: %s\n",
}
#ifdef DEBUG
- printf ("Writing new environment at 0x%lx on %s\n",
+ fprintf(stderr, "Writing new environment at 0x%lx on %s\n",
DEVOFFSET (dev_target), DEVNAME (dev_target));
#endif
rc = flash_write_buf(dev_target, fd_target, environment.image,
off_t offset = DEVOFFSET (dev_current) +
offsetof (struct env_image_redundant, flags);
#ifdef DEBUG
- printf ("Setting obsolete flag in environment at 0x%lx on %s\n",
+ fprintf(stderr,
+ "Setting obsolete flag in environment at 0x%lx on %s\n",
DEVOFFSET (dev_current), DEVNAME (dev_current));
#endif
flash_flag_obsolete (dev_current, fd_current, offset);
/* Other pointers are already set */
free (addr1);
}
+#ifdef DEBUG
+ fprintf(stderr, "Selected env in %s\n", DEVNAME(dev_current));
+#endif
}
return 0;
}
#define OMAP_GP_HDR_SIZE (sizeof(struct gp_header))
#define OMAP_FILE_HDR_SIZE (OMAP_CH_HDR_SIZE+OMAP_GP_HDR_SIZE)
+static int do_swap32 = 0;
+
+static uint32_t omapimage_swap32(uint32_t data)
+{
+ uint32_t result = 0;
+ result = (data & 0xFF000000) >> 24;
+ result |= (data & 0x00FF0000) >> 8;
+ result |= (data & 0x0000FF00) << 8;
+ result |= (data & 0x000000FF) << 24;
+ return result;
+}
+
static uint8_t omapimage_header[OMAP_FILE_HDR_SIZE];
static int omapimage_check_image_types(uint8_t type)
{
struct ch_toc *toc = (struct ch_toc *)ptr;
struct gp_header *gph = (struct gp_header *)(ptr+OMAP_CH_HDR_SIZE);
- uint32_t offset, size;
+ uint32_t offset, size, gph_size, gph_load_addr;
while (toc->section_offset != 0xffffffff
&& toc->section_size != 0xffffffff) {
- offset = toc->section_offset;
- size = toc->section_size;
+ if (do_swap32) {
+ offset = omapimage_swap32(toc->section_offset);
+ size = omapimage_swap32(toc->section_size);
+ } else {
+ offset = toc->section_offset;
+ size = toc->section_size;
+ }
if (!offset || !size)
return -1;
if (offset >= OMAP_CH_HDR_SIZE ||
return -1;
toc++;
}
- if (!valid_gph_size(gph->size))
+
+ if (do_swap32) {
+ gph_size = omapimage_swap32(gph->size);
+ gph_load_addr = omapimage_swap32(gph->load_addr);
+ } else {
+ gph_size = gph->size;
+ gph_load_addr = gph->load_addr;
+ }
+
+ if (!valid_gph_size(gph_size))
return -1;
- if (!valid_gph_load_addr(gph->load_addr))
+ if (!valid_gph_load_addr(gph_load_addr))
return -1;
return 0;
const struct ch_toc *toc = (struct ch_toc *)ptr;
const struct gp_header *gph =
(struct gp_header *)(ptr+OMAP_CH_HDR_SIZE);
- uint32_t offset, size;
+ uint32_t offset, size, gph_size, gph_load_addr;
while (toc->section_offset != 0xffffffff
&& toc->section_size != 0xffffffff) {
- offset = toc->section_offset;
- size = toc->section_size;
+ if (do_swap32) {
+ offset = omapimage_swap32(toc->section_offset);
+ size = omapimage_swap32(toc->section_size);
+ } else {
+ offset = toc->section_offset;
+ size = toc->section_size;
+ }
if (offset >= OMAP_CH_HDR_SIZE ||
offset+size >= OMAP_CH_HDR_SIZE)
toc++;
}
- if (!valid_gph_size(gph->size)) {
- fprintf(stderr,
- "Error: invalid image size %x\n",
- gph->size);
+ if (do_swap32) {
+ gph_size = omapimage_swap32(gph->size);
+ gph_load_addr = omapimage_swap32(gph->load_addr);
+ } else {
+ gph_size = gph->size;
+ gph_load_addr = gph->load_addr;
+ }
+
+ if (!valid_gph_size(gph_size)) {
+ fprintf(stderr, "Error: invalid image size %x\n", gph_size);
exit(EXIT_FAILURE);
}
- if (!valid_gph_load_addr(gph->load_addr)) {
- fprintf(stderr,
- "Error: invalid image load address %x\n",
- gph->size);
+ if (!valid_gph_load_addr(gph_load_addr)) {
+ fprintf(stderr, "Error: invalid image load address %x\n",
+ gph_load_addr);
exit(EXIT_FAILURE);
}
- printf("GP Header: Size %x LoadAddr %x\n",
- gph->size, gph->load_addr);
+ printf("GP Header: Size %x LoadAddr %x\n", gph_size, gph_load_addr);
}
static int toc_offset(void *hdr, void *member)
gph->size = sbuf->st_size - OMAP_FILE_HDR_SIZE;
gph->load_addr = params->addr;
+
+ if (strncmp(params->imagename, "byteswap", 8) == 0) {
+ do_swap32 = 1;
+ int swapped = 0;
+ uint32_t *data = (uint32_t *)ptr;
+
+ while (swapped <= (sbuf->st_size / sizeof(uint32_t))) {
+ *data = omapimage_swap32(*data);
+ swapped++;
+ data++;
+ }
+ }
}
int omapimage_check_params(struct mkimage_params *params)
Return:
Number of patches that exist on top of the branch
"""
- pipe = [['git', 'log', '--oneline', '@{upstream}..'],
+ pipe = [['git', 'log', '--no-color', '--oneline', '@{upstream}..'],
['wc', '-l']]
stdout = command.RunPipe(pipe, capture=True, oneline=True)
patch_count = int(stdout)
from series import Series
# Tags that we detect and remove
-re_remove = re.compile('^BUG=|^TEST=|^Change-Id:|^Review URL:'
- '|Reviewed-on:|Reviewed-by:')
+re_remove = re.compile('^BUG=|^TEST=|^BRANCH=|^Change-Id:|^Review URL:'
+ '|Reviewed-on:|Reviewed-by:|Commit-Ready:')
# Lines which are allowed after a TEST= line
re_allowed_after_test = re.compile('^Signed-off-by:')
start: Commit to start from: 0=HEAD, 1=next one, etc.
count: Number of commits to list
"""
- pipe = [['git', 'log', '--reverse', 'HEAD~%d' % start, '-n%d' % count]]
+ pipe = [['git', 'log', '--no-color', '--reverse', 'HEAD~%d' % start,
+ '-n%d' % count]]
stdout = command.RunPipe(pipe, capture=True)
series = Series()
ps = PatchStream(series, is_log=True)
projects / karo-tx-uboot.git / commitdiff