ppc/85xx: Clean up MPC8544 DS PCI setup code

Use new fsl_pci_init_port() that reduces amount of duplicated code in the
board ports, use IO accessors and clean up printing of status info.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 244a197049c1dc0a9005df3ecb75bb4484967fd2..35a8063c9bf2b5dde64fbc4b4d8503606ebfa91c 100644 (file)
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -101,18 +101,23 @@ static struct pci_controller pcie2_hose;
 static struct pci_controller pcie3_hose;
 #endif
 
-int first_free_busno=0;
-
-void
-pci_init_board(void)
+void pci_init_board(void)
 {
        volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-       uint devdisr = gur->devdisr;
-       uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
-       uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+       struct fsl_pci_info pci_info[4];
+       u32 devdisr, pordevsr, io_sel;
+       u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
+       int first_free_busno = 0;
+       int num = 0;
+
+       int pcie_ep, pcie_configured;
 
-       debug ("   pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
-               devdisr, io_sel, host_agent);
+       devdisr = in_be32(&gur->devdisr);
+       pordevsr = in_be32(&gur->pordevsr);
+       porpllsr = in_be32(&gur->porpllsr);
+       io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+
+       debug ("   pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
 
        if (io_sel & 1) {
                if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
@@ -120,55 +125,29 @@ pci_init_board(void)
                if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
                        printf ("    eTSEC3 is in sgmii mode.\n");
        }
+       puts("\n");
 
 #ifdef CONFIG_PCIE3
-{
-       volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
-       struct pci_controller *hose = &pcie3_hose;
-       int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_3, host_agent);
-       int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
-       struct pci_region *r = hose->regions;
-
-       if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
-               printf ("\n    PCIE3 connected to ULI as %s (base address %x)",
-                       pcie_ep ? "End Point" : "Root Complex",
-                       (uint)pci);
-               if (pci->pme_msg_det) {
-                       pci->pme_msg_det = 0xffffffff;
-                       debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
-               }
-               printf ("\n");
-
-               /* outbound memory */
-               pci_set_region(r++,
-                              CONFIG_SYS_PCIE3_MEM_BUS,
-                              CONFIG_SYS_PCIE3_MEM_PHYS,
-                              CONFIG_SYS_PCIE3_MEM_SIZE,
-                              PCI_REGION_MEM);
-
-               /* outbound io */
-               pci_set_region(r++,
-                              CONFIG_SYS_PCIE3_IO_BUS,
-                              CONFIG_SYS_PCIE3_IO_PHYS,
-                              CONFIG_SYS_PCIE3_IO_SIZE,
-                              PCI_REGION_IO);
+       pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
 
+       if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
+               SET_STD_PCIE_INFO(pci_info[num], 3);
+               pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
 #ifdef CONFIG_SYS_PCIE3_MEM_BUS2
                /* outbound memory */
-               pci_set_region(r++,
+               pci_set_region(&pcie3_hose.regions[0],
                               CONFIG_SYS_PCIE3_MEM_BUS2,
                               CONFIG_SYS_PCIE3_MEM_PHYS2,
                               CONFIG_SYS_PCIE3_MEM_SIZE2,
                               PCI_REGION_MEM);
-#endif
-               hose->region_count = r - hose->regions;
-               hose->first_busno=first_free_busno;
 
-               fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
-               first_free_busno=hose->last_busno+1;
-               printf ("    PCIE3 on bus %02x - %02x\n",
-                       hose->first_busno,hose->last_busno);
+               pcie3_hose.region_count = 1;
+#endif
+               printf ("    PCIE3 connected to ULI as %s (base addr %lx)\n",
+                               pcie_ep ? "End Point" : "Root Complex",
+                               pci_info[num].regs);
+               first_free_busno = fsl_pci_init_port(&pci_info[num++],
+                                       &pcie3_hose, first_free_busno);
 
                /*
                 * Activate ULI1575 legacy chip by performing a fake
@@ -178,187 +157,99 @@ pci_init_board(void)
        } else {
                printf ("    PCIE3: disabled\n");
        }
-
- }
+       puts("\n");
 #else
-       gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
+       setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */
 #endif
 
 #ifdef CONFIG_PCIE1
- {
-       volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
-       struct pci_controller *hose = &pcie1_hose;
-       int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
-       int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
-       struct pci_region *r = hose->regions;
+       pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
 
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
-               printf ("\n    PCIE1 connected to Slot2 as %s (base address %x)",
-                       pcie_ep ? "End Point" : "Root Complex",
-                       (uint)pci);
-               if (pci->pme_msg_det) {
-                       pci->pme_msg_det = 0xffffffff;
-                       debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
-               }
-               printf ("\n");
-
-               /* outbound memory */
-               pci_set_region(r++,
-                              CONFIG_SYS_PCIE1_MEM_BUS,
-                              CONFIG_SYS_PCIE1_MEM_PHYS,
-                              CONFIG_SYS_PCIE1_MEM_SIZE,
-                              PCI_REGION_MEM);
-
-               /* outbound io */
-               pci_set_region(r++,
-                              CONFIG_SYS_PCIE1_IO_BUS,
-                              CONFIG_SYS_PCIE1_IO_PHYS,
-                              CONFIG_SYS_PCIE1_IO_SIZE,
-                              PCI_REGION_IO);
-
+               SET_STD_PCIE_INFO(pci_info[num], 1);
+               pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
 #ifdef CONFIG_SYS_PCIE1_MEM_BUS2
                /* outbound memory */
-               pci_set_region(r++,
+               pci_set_region(&pcie1_hose.regions[0],
                               CONFIG_SYS_PCIE1_MEM_BUS2,
                               CONFIG_SYS_PCIE1_MEM_PHYS2,
                               CONFIG_SYS_PCIE1_MEM_SIZE2,
                               PCI_REGION_MEM);
-#endif
-               hose->region_count = r - hose->regions;
-               hose->first_busno=first_free_busno;
-
-               fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
 
-               first_free_busno=hose->last_busno+1;
-               printf("    PCIE1 on bus %02x - %02x\n",
-                      hose->first_busno,hose->last_busno);
+               pcie1_hose.region_count = 1;
+#endif
+               printf ("    PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
+                               pcie_ep ? "End Point" : "Root Complex",
+                               pci_info[num].regs);
 
+               first_free_busno = fsl_pci_init_port(&pci_info[num++],
+                                       &pcie1_hose, first_free_busno);
        } else {
                printf ("    PCIE1: disabled\n");
        }
 
- }
+       puts("\n");
 #else
-       gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+       setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
 #endif
 
 #ifdef CONFIG_PCIE2
- {
-       volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
-       struct pci_controller *hose = &pcie2_hose;
-       int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent);
-       int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
-       struct pci_region *r = hose->regions;
-
-       if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
-               printf ("\n    PCIE2 connected to Slot 1 as %s (base address %x)",
-                       pcie_ep ? "End Point" : "Root Complex",
-                       (uint)pci);
-               if (pci->pme_msg_det) {
-                       pci->pme_msg_det = 0xffffffff;
-                       debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
-               }
-               printf ("\n");
-
-               /* outbound memory */
-               pci_set_region(r++,
-                              CONFIG_SYS_PCIE2_MEM_BUS,
-                              CONFIG_SYS_PCIE2_MEM_PHYS,
-                              CONFIG_SYS_PCIE2_MEM_SIZE,
-                              PCI_REGION_MEM);
-
-               /* outbound io */
-               pci_set_region(r++,
-                              CONFIG_SYS_PCIE2_IO_BUS,
-                              CONFIG_SYS_PCIE2_IO_PHYS,
-                              CONFIG_SYS_PCIE2_IO_SIZE,
-                              PCI_REGION_IO);
+       pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
 
+       if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
+               SET_STD_PCIE_INFO(pci_info[num], 2);
+               pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
 #ifdef CONFIG_SYS_PCIE2_MEM_BUS2
                /* outbound memory */
-               pci_set_region(r++,
+               pci_set_region(&pcie2_hose.regions[0],
                               CONFIG_SYS_PCIE2_MEM_BUS2,
                               CONFIG_SYS_PCIE2_MEM_PHYS2,
                               CONFIG_SYS_PCIE2_MEM_SIZE2,
                               PCI_REGION_MEM);
-#endif
-               hose->region_count = r - hose->regions;
-               hose->first_busno=first_free_busno;
-
-               fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-               first_free_busno=hose->last_busno+1;
-               printf ("    PCIE2 on bus %02x - %02x\n",
-                       hose->first_busno,hose->last_busno);
 
+               pcie2_hose.region_count = 1;
+#endif
+               printf ("    PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
+                               pcie_ep ? "End Point" : "Root Complex",
+                               pci_info[num].regs);
+               first_free_busno = fsl_pci_init_port(&pci_info[num++],
+                                       &pcie2_hose, first_free_busno);
        } else {
                printf ("    PCIE2: disabled\n");
        }
 
- }
+       puts("\n");
 #else
-       gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
+       setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
 #endif
 
-
 #ifdef CONFIG_PCI1
-{
-       volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
-       struct pci_controller *hose = &pci1_hose;
-       struct pci_region *r = hose->regions;
-
-       uint pci_agent = is_fsl_pci_agent(LAW_TRGT_IF_PCI, host_agent);
-       uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */
-       uint pci_32 = 1;
-       uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;       /* PORDEVSR[14] */
-       uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;   /* PORPLLSR[16] */
-
+       pci_speed = 66666000;
+       pci_32 = 1;
+       pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+       pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
 
        if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
-               printf ("\n    PCI: %d bit, %s MHz, %s, %s, %s (base address %x)\n",
+               SET_STD_PCI_INFO(pci_info[num], 1);
+               pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
+               printf ("\n    PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
                        (pci_32) ? 32 : 64,
                        (pci_speed == 33333000) ? "33" :
                        (pci_speed == 66666000) ? "66" : "unknown",
                        pci_clk_sel ? "sync" : "async",
                        pci_agent ? "agent" : "host",
                        pci_arb ? "arbiter" : "external-arbiter",
-                       (uint)pci
-                       );
+                       pci_info[num].regs);
 
-               /* outbound memory */
-               pci_set_region(r++,
-                              CONFIG_SYS_PCI1_MEM_BUS,
-                              CONFIG_SYS_PCI1_MEM_PHYS,
-                              CONFIG_SYS_PCI1_MEM_SIZE,
-                              PCI_REGION_MEM);
-
-               /* outbound io */
-               pci_set_region(r++,
-                              CONFIG_SYS_PCI1_IO_BUS,
-                              CONFIG_SYS_PCI1_IO_PHYS,
-                              CONFIG_SYS_PCI1_IO_SIZE,
-                              PCI_REGION_IO);
-
-#ifdef CONFIG_SYS_PCIE3_MEM_BUS2
-               /* outbound memory */
-               pci_set_region(r++,
-                              CONFIG_SYS_PCIE3_MEM_BUS2,
-                              CONFIG_SYS_PCIE3_MEM_PHYS2,
-                              CONFIG_SYS_PCIE3_MEM_SIZE2,
-                              PCI_REGION_MEM);
-#endif
-               hose->region_count = r - hose->regions;
-               hose->first_busno=first_free_busno;
-
-               fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-               first_free_busno=hose->last_busno+1;
-               printf ("PCI on bus %02x - %02x\n",
-                       hose->first_busno,hose->last_busno);
+               first_free_busno = fsl_pci_init_port(&pci_info[num++],
+                                       &pci1_hose, first_free_busno);
        } else {
                printf ("    PCI: disabled\n");
        }
-}
+
+       puts("\n");
 #else
-       gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+       setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
 #endif
 }