]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
sunxi: Add support for the rsb (Reduced Serial Bus)
authorHans de Goede <hdegoede@redhat.com>
Sat, 29 Nov 2014 12:38:35 +0000 (13:38 +0100)
committerHans de Goede <hdegoede@redhat.com>
Wed, 14 Jan 2015 13:56:36 +0000 (14:56 +0100)
sun8i (A23) introduces a new bus for communicating with the pmic, the rsb,
the rsb is also used to communicate with the pmic on the A80, and is
documented in the A80 user manual.

This commit adds support for this based on the rsb driver from the allwinner
u-boot sources.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
arch/arm/cpu/armv7/sunxi/Makefile
arch/arm/cpu/armv7/sunxi/rsb.c [new file with mode: 0644]
arch/arm/include/asm/arch-sunxi/cpu.h
arch/arm/include/asm/arch-sunxi/gpio.h
arch/arm/include/asm/arch-sunxi/prcm.h
arch/arm/include/asm/arch-sunxi/rsb.h [new file with mode: 0644]

index 1337b60ac56e09e71b9a195240e0bfc09e55f539..3e8975a6fb948ac532d1bf347965ac907665f128 100644 (file)
@@ -15,6 +15,7 @@ obj-y += pinmux.o
 obj-$(CONFIG_MACH_SUN6I)       += prcm.o
 obj-$(CONFIG_MACH_SUN8I)       += prcm.o
 obj-$(CONFIG_MACH_SUN6I)       += p2wi.o
+obj-$(CONFIG_MACH_SUN8I)       += rsb.o
 obj-$(CONFIG_MACH_SUN4I)       += clock_sun4i.o
 obj-$(CONFIG_MACH_SUN5I)       += clock_sun4i.o
 obj-$(CONFIG_MACH_SUN6I)       += clock_sun6i.o
diff --git a/arch/arm/cpu/armv7/sunxi/rsb.c b/arch/arm/cpu/armv7/sunxi/rsb.c
new file mode 100644 (file)
index 0000000..b72bb9d
--- /dev/null
@@ -0,0 +1,158 @@
+/*
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on allwinner u-boot sources rsb code which is:
+ * (C) Copyright 2007-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * lixiang <lixiang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/rsb.h>
+
+static void rsb_cfg_io(void)
+{
+       sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_GPL0_R_RSB_SCK);
+       sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_GPL1_R_RSB_SDA);
+       sunxi_gpio_set_pull(SUNXI_GPL(0), 1);
+       sunxi_gpio_set_pull(SUNXI_GPL(1), 1);
+       sunxi_gpio_set_drv(SUNXI_GPL(0), 2);
+       sunxi_gpio_set_drv(SUNXI_GPL(1), 2);
+}
+
+static void rsb_set_clk(void)
+{
+       struct sunxi_rsb_reg * const rsb =
+               (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+       u32 div = 0;
+       u32 cd_odly = 0;
+
+       /* Source is Hosc24M, set RSB clk to 3Mhz */
+       div = 24000000 / 3000000 / 2 - 1;
+       cd_odly = div >> 1;
+       if (!cd_odly)
+               cd_odly = 1;
+
+       writel((cd_odly << 8) | div, &rsb->ccr);
+}
+
+void rsb_init(void)
+{
+       struct sunxi_rsb_reg * const rsb =
+               (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+
+       rsb_cfg_io();
+
+       /* Enable RSB and PIO clk, and de-assert their resets */
+       prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_RSB);
+
+       writel(RSB_CTRL_SOFT_RST, &rsb->ctrl);
+       rsb_set_clk();
+}
+
+static int rsb_await_trans(void)
+{
+       struct sunxi_rsb_reg * const rsb =
+               (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+       unsigned long tmo = timer_get_us() + 1000000;
+       u32 stat;
+       int ret;
+
+       while (1) {
+               stat = readl(&rsb->stat);
+               if (stat & RSB_STAT_LBSY_INT) {
+                       ret = -EBUSY;
+                       break;
+               }
+               if (stat & RSB_STAT_TERR_INT) {
+                       ret = -EIO;
+                       break;
+               }
+               if (stat & RSB_STAT_TOVER_INT) {
+                       ret = 0;
+                       break;
+               }
+               if (timer_get_us() > tmo) {
+                       ret = -ETIME;
+                       break;
+               }
+       }
+       writel(stat, &rsb->stat); /* Clear status bits */
+
+       return ret;
+}
+
+int rsb_set_device_mode(u32 device_mode_data)
+{
+       struct sunxi_rsb_reg * const rsb =
+               (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+       unsigned long tmo = timer_get_us() + 1000000;
+
+       writel(RSB_DMCR_DEVICE_MODE_START | device_mode_data, &rsb->dmcr);
+
+       while (readl(&rsb->dmcr) & RSB_DMCR_DEVICE_MODE_START) {
+               if (timer_get_us() > tmo)
+                       return -ETIME;
+       }
+
+       return rsb_await_trans();
+}
+
+static int rsb_do_trans(void)
+{
+       struct sunxi_rsb_reg * const rsb =
+               (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+
+       setbits_le32(&rsb->ctrl, RSB_CTRL_START_TRANS);
+       return rsb_await_trans();
+}
+
+int rsb_set_device_address(u16 device_addr, u16 runtime_addr)
+{
+       struct sunxi_rsb_reg * const rsb =
+               (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+
+       writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_addr) |
+              RSB_DEVADDR_DEVICE_ADDR(device_addr), &rsb->devaddr);
+       writel(RSB_CMD_SET_RTSADDR, &rsb->cmd);
+
+       return rsb_do_trans();
+}
+
+int rsb_write(const u16 runtime_device_addr, const u8 reg_addr, u8 data)
+{
+       struct sunxi_rsb_reg * const rsb =
+               (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+
+       writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_device_addr), &rsb->devaddr);
+       writel(reg_addr, &rsb->addr);
+       writel(data, &rsb->data);
+       writel(RSB_CMD_BYTE_WRITE, &rsb->cmd);
+
+       return rsb_do_trans();
+}
+
+int rsb_read(const u16 runtime_device_addr, const u8 reg_addr, u8 *data)
+{
+       struct sunxi_rsb_reg * const rsb =
+               (struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
+       int ret;
+
+       writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_device_addr), &rsb->devaddr);
+       writel(reg_addr, &rsb->addr);
+       writel(RSB_CMD_BYTE_READ, &rsb->cmd);
+
+       ret = rsb_do_trans();
+       if (ret)
+               return ret;
+
+       *data = readl(&rsb->data) & 0xff;
+
+       return 0;
+}
index adf203ab96c4fdbf8326202780b4c7b91df885a7..bcfa00d835b70d096baa8394ccc94f4d50831b0e 100644 (file)
 #define SUNXI_R_UART_BASE              0x01f02800
 #define SUNXI_R_PIO_BASE               0x01f02c00
 #define SUN6I_P2WI_BASE                        0x01f03400
+#define SUNXI_RSB_BASE                 0x01f03400
 
 /* CoreSight Debug Module */
 #define SUNXI_CSDM_BASE                        0x3f500000
index 9f972cefd91f20d1d7c4f3279c3f3e4eeee42c20..6623f15220a408021b1643a80360865ca7dc9e64 100644 (file)
@@ -176,6 +176,8 @@ enum sunxi_gpio_number {
 #define SUN6I_GPL0_R_P2WI_SCK  3
 #define SUN6I_GPL1_R_P2WI_SDA  3
 
+#define SUN8I_GPL0_R_RSB_SCK   2
+#define SUN8I_GPL1_R_RSB_SDA   2
 #define SUN8I_GPL2_R_UART_TX   2
 #define SUN8I_GPL3_R_UART_RX   2
 
index 88de1ff67594ace212b1deb30c246066a741ae82..82ed541e91e4789535e236963afd9b2f232daa25 100644 (file)
@@ -50,7 +50,8 @@
 #define PRCM_APB0_GATE_PIO (0x1 << 0)
 #define PRCM_APB0_GATE_IR (0x1 << 1)
 #define PRCM_APB0_GATE_TIMER01 (0x1 << 2)
-#define PRCM_APB0_GATE_P2WI (0x1 << 3)
+#define PRCM_APB0_GATE_P2WI (0x1 << 3)         /* sun6i */
+#define PRCM_APB0_GATE_RSB (0x1 << 3)          /* sun8i */
 #define PRCM_APB0_GATE_UART (0x1 << 4)
 #define PRCM_APB0_GATE_1WIRE (0x1 << 5)
 #define PRCM_APB0_GATE_I2C (0x1 << 6)
diff --git a/arch/arm/include/asm/arch-sunxi/rsb.h b/arch/arm/include/asm/arch-sunxi/rsb.h
new file mode 100644 (file)
index 0000000..95a595a
--- /dev/null
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on allwinner u-boot sources rsb code which is:
+ * (C) Copyright 2007-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * lixiang <lixiang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __SUNXI_RSB_H
+#define __SUNXI_RSB_H
+
+#include <common.h>
+#include <asm/io.h>
+
+struct sunxi_rsb_reg {
+       u32 ctrl;       /* 0x00 */
+       u32 ccr;        /* 0x04 */
+       u32 inte;       /* 0x08 */
+       u32 stat;       /* 0x0c */
+       u32 addr;       /* 0x10 */
+       u8 res0[8];     /* 0x14 */
+       u32 data;       /* 0x1c */
+       u8 res1[4];     /* 0x20 */
+       u32 lcr;        /* 0x24 */
+       u32 dmcr;       /* 0x28 */
+       u32 cmd;        /* 0x2c */
+       u32 devaddr;    /* 0x30 */
+};
+
+#define RSB_CTRL_SOFT_RST              (1 << 0)
+#define RSB_CTRL_START_TRANS           (1 << 7)
+
+#define RSB_STAT_TOVER_INT             (1 << 0)
+#define RSB_STAT_TERR_INT              (1 << 1)
+#define RSB_STAT_LBSY_INT              (1 << 2)
+
+#define RSB_DMCR_DEVICE_MODE_START     (1 << 31)
+
+#define RSB_CMD_BYTE_WRITE             0x4e
+#define RSB_CMD_BYTE_READ              0x8b
+#define RSB_CMD_SET_RTSADDR            0xe8
+
+#define RSB_DEVADDR_RUNTIME_ADDR(x)    ((x) << 16)
+#define RSB_DEVADDR_DEVICE_ADDR(x)     ((x) << 0)
+
+void rsb_init(void);
+int rsb_set_device_mode(u32 device_mode_data);
+int rsb_set_device_address(u16 device_addr, u16 runtime_addr);
+int rsb_write(const u16 runtime_device_addr, const u8 reg_addr, u8 data);
+int rsb_read(const u16 runtime_device_addr, const u8 reg_addr, u8 *data);
+
+#endif