]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
pci/fsl_pci_init: Use PCIe capability to determine if controller is PCIe
authorKumar Gala <galak@kernel.crashing.org>
Wed, 5 Aug 2009 12:49:27 +0000 (07:49 -0500)
committerKumar Gala <galak@kernel.crashing.org>
Fri, 28 Aug 2009 22:12:36 +0000 (17:12 -0500)
Change the code to use the PCIe capabilities register to determine if we
are a PCIe controller or not.  Additionally cleaned up some white space
and formatting in the file.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
drivers/pci/fsl_pci_init.c
include/pci.h

index c40ab3086d02f13867b4b6c4d780a1355b3f17c3..f9c0752c42579c0eab66ec6f856b0ca0cbb21e21 100644 (file)
@@ -137,16 +137,12 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
 {
        u16 temp16;
        u32 temp32;
-       int busno = hose->first_busno;
-       int enabled;
+       int enabled, r, inbound = 0;
        u16 ltssm;
-       u8 temp8;
-       int r;
-       int bridge;
-       int inbound = 0;
+       u8 temp8, pcie_cap;
        volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)cfg_addr;
        struct pci_region *reg = hose->regions + hose->region_count;
-       pci_dev_t dev = PCI_BDF(busno,0,0);
+       pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
 
        /* Initialize ATMU registers based on hose regions and flags */
        volatile pot_t *po = &pci->pot[1];      /* skip 0 */
@@ -198,6 +194,9 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
                }
        }
 
+       /* see if we are a PCIe or PCI controller */
+       pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
+
        pci_register_hose(hose);
        pciauto_config_init(hose);      /* grab pci_{mem,prefetch,io} */
        hose->current_busno = hose->first_busno;
@@ -212,11 +211,7 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
        temp32 |= 0xf000e;              /* set URR, FER, NFER (but not CER) */
        pci_hose_write_config_dword(hose, dev, PCI_DCR, temp32);
 
-       pci_hose_read_config_byte (hose, dev, PCI_HEADER_TYPE, &temp8);
-       bridge = temp8 & PCI_HEADER_TYPE_BRIDGE; /* Bridge, such as pcie */
-
-       if ( bridge ) {
-
+       if (pcie_cap == PCI_CAP_ID_EXP) {
                pci_hose_read_config_word(hose, dev, PCI_LTSSM, &ltssm);
                enabled = ltssm >= PCI_LTSSM_L0;
 
@@ -260,14 +255,12 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
 #endif
                hose->current_busno++; /* Start scan with secondary */
                pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
-
        }
 
        /* Use generic setup_device to initialize standard pci regs,
         * but do not allocate any windows since any BAR found (such
         * as PCSRBAR) is not in this cpu's memory space.
         */
-
        pciauto_setup_device(hose, dev, 0, hose->pci_mem,
                             hose->pci_prefetch, hose->pci_io);
 
@@ -294,7 +287,10 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
                hose->last_busno = hose->current_busno;
        }
 
-       if ( bridge ) { /* update limit regs and subordinate busno */
+       /* if we are PCIe - update limit regs and subordinate busno
+        * for the virtual P2P bridge
+        */
+       if (pcie_cap == PCI_CAP_ID_EXP) {
                pciauto_postscan_setup_bridge(hose, dev, hose->last_busno);
        }
 #else
@@ -302,15 +298,13 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
 #endif
 
        /* Clear all error indications */
-
-       if (bridge)
+       if (pcie_cap == PCI_CAP_ID_EXP)
                pci->pme_msg_det = 0xffffffff;
        pci->pedr = 0xffffffff;
 
        pci_hose_read_config_word (hose, dev, PCI_DSR, &temp16);
        if (temp16) {
-               pci_hose_write_config_word(hose, dev,
-                                       PCI_DSR, 0xffff);
+               pci_hose_write_config_word(hose, dev, PCI_DSR, 0xffff);
        }
 
        pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16);
index aaa455434451de8b78a73f56e444656c5d7c90ff..491f814e413fa451f81ae3b0fa04a42dd7f83c98 100644 (file)
 #define  PCI_CAP_ID_SLOTID     0x04    /* Slot Identification */
 #define  PCI_CAP_ID_MSI                0x05    /* Message Signalled Interrupts */
 #define  PCI_CAP_ID_CHSWP      0x06    /* CompactPCI HotSwap */
+#define  PCI_CAP_ID_EXP        0x10    /* PCI Express */
 #define PCI_CAP_LIST_NEXT      1       /* Next capability in the list */
 #define PCI_CAP_FLAGS          2       /* Capability defined flags (16 bits) */
 #define PCI_CAP_SIZEOF         4