tuge1 MPC8321
tuxx1 MPC8321
-Cyril Chemparathy <cyril@ti.com>
-
- tnetv107x_evm tnetv107x
-
Conn Clark <clark@esteem.com>
ESTEEM192E MPC8xx
ep8260 MPC8260
+Chan-Taek Park <c-park@ti.com>
+
+ tnetv107x_evm tnetv107x
+
Denis Peter <d.peter@mpl.ch>
MIP405 PPC4xx
uc100 MPC857
- TQM85xx MPC8540/8541/8555/8560
-
acadia PPC405EZ
alpr PPC440GX
bamboo PPC440EP
SMDKV310 ARM ARMV7 (EXYNOS4210 SoC)
SMDK5250 ARM ARMV7 (EXYNOS5250 SoC)
-Heungjun Kim <riverful.kim@samsung.com>
+Lukasz Majewski <l.majewski@samsung.com>
trats ARM ARMV7 (EXYNOS4210 SoC)
VERSION = 2012
PATCHLEVEL = 10
SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
- Boot Delay: CONFIG_BOOTDELAY - in seconds
Delay before automatically booting the default image;
set to -1 to disable autoboot.
+ set to -2 to autoboot with no delay and not check for abort
+ (even when CONFIG_ZERO_BOOTDELAY_CHECK is defined).
See doc/README.autoboot for these options that
work with CONFIG_BOOTDELAY. None are required.
CONFIG_CMD_IMLS List all found images
CONFIG_CMD_IMMAP * IMMR dump support
CONFIG_CMD_IMPORTENV * import an environment
+ CONFIG_CMD_INI * import data from an ini file into the env
CONFIG_CMD_IRQ * irqinfo
CONFIG_CMD_ITEST Integer/string test of 2 values
CONFIG_CMD_JFFS2 * JFFS2 Support
CONFIG_CMD_SPI * SPI serial bus support
CONFIG_CMD_TFTPSRV * TFTP transfer in server mode
CONFIG_CMD_TFTPPUT * TFTP put command (upload)
- CONFIG_CMD_TIME * run command and report execution time
+ CONFIG_CMD_TIME * run command and report execution time (ARM specific)
+ CONFIG_CMD_TIMER * access to the system tick timer
CONFIG_CMD_USB * USB support
CONFIG_CMD_CDP * Cisco Discover Protocol support
CONFIG_CMD_MFSL * Microblaze FSL support
consider minicom to be broken, and recommend not to use it. Under
Unix, I recommend to use C-Kermit for general purpose use (and
especially for kermit binary protocol download ("loadb" command), and
-use "cu" for S-Record download ("loads" command).
+use "cu" for S-Record download ("loads" command). See
+http://www.denx.de/wiki/view/DULG/SystemSetup#Section_4.3.
+for help with kermit.
+
Nevertheless, if you absolutely want to use it try adding this
configuration to your "File transfer protocols" section:
#define PLATFORM_FFS
#include <asm/bitops/ffs.h>
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
#endif /* __ASM_GENERIC_BITOPS_H */
timestamp = t;
}
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+ulong get_tbclk(void)
+{
+ return CONFIG_SYS_HZ;
+}
+
void __udelay(ulong usec)
{
ulong elapsed = 0;
DBKIND_A: .long 0xFE800020
DBKIND_D: .long 0x00000005
DBCONF_A: .long 0xFE800024
-DBCONF_D: .long 0x0D020901
+DBCONF_D: .long 0x0D020A01
DBTR0_A: .long 0xFE800040
DBTR0_D_533:.long 0x00000004
/* After a loadace command, the SystemAce control register is left in a wonky state. */
/* this code did not work in board_pre_init */
unsigned char *p = (unsigned char *) AP1000_SYSACE_REGBASE;
+ unsigned int *revision_reg_ptr = (unsigned int *) AP1xx_FPGA_REV_ADDR;
+ unsigned int device = (*revision_reg_ptr & AP1xx_TARGET_MASK);
p[SYSACE_CTRLREG0] = 0x0;
/* add platform and device to banner */
- switch (get_device ()) {
+ switch (device) {
case AP1xx_AP107_TARGET:
puts (AP1xx_AP107_TARGET_STR);
break;
return (*revision_reg_ptr & AP1xx_PLATFORM_MASK);
}
-unsigned int get_device (void)
-{
- unsigned int *revision_reg_ptr = (unsigned int *) AP1xx_FPGA_REV_ADDR;
-
- return (*revision_reg_ptr & AP1xx_TARGET_MASK);
-}
-
#if 0 /* loadace is not working; it appears to be a hardware issue with the system ace. */
/*
This function loads FPGA configurations from the SystemACE CompactFlash
void set_eat_machine_checks(int a_flag);
int get_eat_machine_checks(void);
unsigned int get_platform(void);
-unsigned int get_device(void);
void* memcpyb(void * dest,const void *src,size_t count);
int process_bootflag(ulong bootflag);
void user_led_on(void);
+++ /dev/null
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += $(BOARD).o
-COBJS-y += sdram.o
-COBJS-y += law.o
-COBJS-y += tlb.o
-
-COBJS-$(CONFIG_NAND) += nand.o
-
-COBJS := $(COBJS-y)
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * Standard mapping:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xc000_0000 0xdfff_ffff RapidIO or PCI express 512M
- * 0xe000_0000 0xe000_ffff CCSR 1M
- * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
- * 0xe300_0000 0xe3ff_ffff CAN and NAND Flash 16M
- * 0xef00_0000 0xefff_ffff PCI express IO 16M
- * 0xfc00_0000 0xffff_ffff FLASH (boot bank) 128M
- *
- * Big FLASH mapping:
- *
- * 0x0000_0000 0x7fff_ffff DDR 2G
- * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
- * 0xa000_0000 0xa000_ffff CCSR 1M
- * 0xa200_0000 0xa2ff_ffff PCI1 IO 16M
- * 0xa300_0000 0xa3ff_ffff CAN and NAND Flash 16M
- * 0xaf00_0000 0xafff_ffff PCI express IO 16M
- * 0xb000_0000 0xbfff_ffff RapidIO or PCI express 256M
- * 0xc000_0000 0xffff_ffff FLASH (boot bank) 1G
- *
- * Notes:
- * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-#ifdef CONFIG_TQM_BIGFLASH
-#define LAW_3_SIZE LAW_SIZE_1G
-#define LAW_5_SIZE LAW_SIZE_256M
-#else
-#define LAW_3_SIZE LAW_SIZE_128M
-#define LAW_5_SIZE LAW_SIZE_512M
-#endif
-
-struct law_entry law_table[] = {
- SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_2G, LAW_TRGT_IF_DDR),
- SET_LAW(CONFIG_SYS_LBC_FLASH_BASE, LAW_3_SIZE, LAW_TRGT_IF_LBC),
-#ifndef CONFIG_PCIE1
- SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_5_SIZE, LAW_TRGT_IF_RIO),
-#endif /* CONFIG_PCIE1 */
-#if defined(CONFIG_CAN_DRIVER) || defined(CONFIG_NAND)
- SET_LAW(CONFIG_SYS_CAN_BASE, LAW_SIZE_16M, LAW_TRGT_IF_LBC),
-#endif /* CONFIG_CAN_DRIVER || CONFIG_NAND */
-};
-
-int num_law_entries = ARRAY_SIZE (law_table);
+++ /dev/null
-/*
- * (C) Copyright 2008 Wolfgang Grandegger <wg@denx.de>
- *
- * (C) Copyright 2006
- * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/fsl_upm.h>
-#include <ioports.h>
-
-#include <nand.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern uint get_lbc_clock (void);
-
-/* index of UPM RAM array run pattern for NAND command cycle */
-#define CONFIG_SYS_NAN_UPM_WRITE_CMD_OFS 0x08
-
-/* index of UPM RAM array run pattern for NAND address cycle */
-#define CONFIG_SYS_NAND_UPM_WRITE_ADDR_OFS 0x10
-
-/* Structure for table with supported UPM timings */
-struct upm_freq {
- ulong freq;
- const u32 *upm_patt;
- uchar gpl4_disable;
- uchar ehtr;
- uchar ead;
-};
-
-/* NAND-FLASH UPM tables for TQM85XX according to TQM8548.pq.timing.101.doc */
-
-/* UPM pattern for bus clock = 25 MHz */
-static const u32 upm_patt_25[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff32000, 0x0fa32000, 0x3fb32005, 0xfffffc00,
- /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 33.3 MHz */
-static const u32 upm_patt_33[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00,
- /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 41.7 MHz */
-static const u32 upm_patt_42[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff32000, 0x0fa32100, 0x3fb32005, 0xfffffc00,
- /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff2c30, 0x00ff2c30, 0x0fff2c35, 0xfffffc00,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3ec30, 0x00f3ec30, 0x0ff3ec35, 0xfffffc00,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f32c00, 0x00f32c00, 0x0ff32c05, 0xfffffc00,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 50 MHz */
-static const u32 upm_patt_50[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff33000, 0x0fa33100, 0x0fa33005, 0xfffffc00,
- /* 0x04 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c35, 0xfffffc00,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc35, 0xfffffc00,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c05, 0xfffffc00,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 66.7 MHz */
-static const u32 upm_patt_67[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000,
- /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff3d30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3fd30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f33d00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 83.3 MHz */
-static const u32 upm_patt_83[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff33000, 0x0fe33000, 0x0fa33100, 0x0fa33000,
- /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff3e30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3fe30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f33e00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 100 MHz */
-static const u32 upm_patt_100[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33200, 0x0fa33000,
- /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff3f30, 0x00ff3c30, 0x0fff3c30, 0x0fff3c35,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3ff30, 0x00f3fc30, 0x0ff3fc30, 0x0ff3fc35,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f33f00, 0x00f33c00, 0x0ff33c00, 0x0ff33c05,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 133.3 MHz */
-static const u32 upm_patt_133[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff33100, 0x0fe33000, 0x0fa33300, 0x0fa33000,
- /* 0x04 */ 0x0fa33000, 0x0fa33005, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff3f30, 0x00ff3d30, 0x0fff3d30, 0x0fff3c35,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3ff30, 0x00f3fd30, 0x0ff3fd30, 0x0ff3fc35,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f33f00, 0x00f33d00, 0x0ff33d00, 0x0ff33c05,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 166.7 MHz */
-static const u32 upm_patt_167[] = {
- /* Offset */ /* UPM Read Single RAM array entry -> NAND Read Data */
- /* 0x00 */ 0x0ff33200, 0x0fe33000, 0x0fa33300, 0x0fa33300,
- /* 0x04 */ 0x0fa33005, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write CMD */
- /* 0x08 */ 0x00ff3f30, 0x00ff3f30, 0x0fff3e30, 0xffff3c35,
- /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Read Burst RAM array entry -> NAND Write ADDR */
- /* 0x10 */ 0x00f3ff30, 0x00f3ff30, 0x0ff3fe30, 0x0ff3fc35,
- /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Single RAM array entry -> NAND Write Data */
- /* 0x18 */ 0x00f33f00, 0x00f33f00, 0x0ff33e00, 0x0ff33c05,
- /* 0x1C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
- /* UPM Write Burst RAM array entry -> unused */
- /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Refresh Timer RAM array entry -> unused */
- /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
- /* UPM Exception RAM array entry -> unsused */
- /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* Supported UPM timings */
-struct upm_freq upm_freq_table[] = {
- /* nominal freq. | ptr to table | GPL4 dis. | EHTR | EAD */
- {25000000, upm_patt_25, 1, 0, 0},
- {33333333, upm_patt_33, 1, 0, 0},
- {41666666, upm_patt_42, 1, 0, 0},
- {50000000, upm_patt_50, 0, 0, 0},
- {66666666, upm_patt_67, 0, 0, 0},
- {83333333, upm_patt_83, 0, 0, 0},
- {100000000, upm_patt_100, 0, 1, 1},
- {133333333, upm_patt_133, 0, 1, 1},
- {166666666, upm_patt_167, 0, 1, 1},
-};
-
-#define UPM_FREQS (sizeof(upm_freq_table) / sizeof(struct upm_freq))
-
-volatile const u32 *nand_upm_patt;
-
-/*
- * write into UPMB ram
- */
-static void upmb_write (u_char addr, ulong val)
-{
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-
- out_be32 (&lbc->mdr, val);
-
- clrsetbits_be32(&lbc->mbmr, MxMR_MAD_MSK,
- MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
-
- /* dummy access to perform write */
- out_8 ((void __iomem *)CONFIG_SYS_NAND_BASE, 0);
-
- clrbits_be32(&lbc->mbmr, MxMR_OP_WARR);
-}
-
-/*
- * Initialize UPM for NAND flash access.
- */
-static void nand_upm_setup (volatile fsl_lbc_t *lbc)
-{
- uint i, j;
- uint or3 = CONFIG_SYS_OR3_PRELIM;
- uint clock = get_lbc_clock ();
-
- set_lbc_br(3, 0); /* disable bank and reset all bits */
- set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
-
- /*
- * Search appropriate UPM table for bus clock.
- * If the bus clock exceeds a tolerated value, take the UPM timing for
- * the next higher supported frequency to ensure that access works
- * (even the access may be slower then).
- */
- for (i = 0; (i < UPM_FREQS) && (clock > upm_freq_table[i].freq); i++)
- ;
-
- if (i >= UPM_FREQS)
- /* no valid entry found */
- /* take last entry with configuration for max. bus clock */
- i--;
-
- if (upm_freq_table[i].ehtr) {
- /* EHTR must be set due to TQM8548 timing specification */
- or3 |= OR_UPM_EHTR;
- }
- if (upm_freq_table[i].ead)
- /* EAD must be set due to TQM8548 timing specification */
- or3 |= OR_UPM_EAD;
-
- set_lbc_or(3, or3);
-
- /* Assign address of table */
- nand_upm_patt = upm_freq_table[i].upm_patt;
-
- for (j = 0; j < 64; j++) {
- upmb_write (j, *nand_upm_patt);
- nand_upm_patt++;
- }
-
- /* Put UPM back to normal operation mode */
- if (upm_freq_table[i].gpl4_disable)
- /* GPL4 must be disabled according to timing specification */
- out_be32 (&lbc->mbmr, MxMR_OP_NORM | MxMR_GPL_x4DIS);
-
- return;
-}
-
-static struct fsl_upm_nand fun = {
- .width = 8,
- .upm_cmd_offset = 0x08,
- .upm_addr_offset = 0x10,
- .upm_mar_chip_offset = CONFIG_SYS_NAND_CS_DIST,
- .chip_offset = CONFIG_SYS_NAND_CS_DIST,
- .chip_delay = NAND_BIG_DELAY_US,
- .wait_flags = FSL_UPM_WAIT_RUN_PATTERN | FSL_UPM_WAIT_WRITE_BUFFER,
-};
-
-void board_nand_select_device (struct nand_chip *nand, int chip)
-{
-}
-
-int board_nand_init (struct nand_chip *nand)
-{
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-
- if (!nand_upm_patt)
- nand_upm_setup (lbc);
-
- fun.upm.io_addr = nand->IO_ADDR_R;
- fun.upm.mxmr = (void __iomem *)&lbc->mbmr;
- fun.upm.mdr = (void __iomem *)&lbc->mdr;
- fun.upm.mar = (void __iomem *)&lbc->mar;
-
- return fsl_upm_nand_init (nand, &fun);
-}
+++ /dev/null
-
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-
-struct sdram_conf_s {
- unsigned long size;
- unsigned long reg;
-#ifdef CONFIG_TQM8548
- unsigned long refresh;
-#endif /* CONFIG_TQM8548 */
-};
-
-typedef struct sdram_conf_s sdram_conf_t;
-
-#ifdef CONFIG_TQM8548
-#ifdef CONFIG_TQM8548_AG
-sdram_conf_t ddr_cs_conf[] = {
- {(1024 << 20), 0x80044202, 0x0002D000}, /* 1024MB, 14x10(4) */
- { (512 << 20), 0x80044102, 0x0001A000}, /* 512MB, 13x10(4) */
- { (256 << 20), 0x80040102, 0x00014000}, /* 256MB, 13x10(4) */
- { (128 << 20), 0x80040101, 0x0000C000}, /* 128MB, 13x9(4) */
-};
-#else /* !CONFIG_TQM8548_AG */
-sdram_conf_t ddr_cs_conf[] = {
- {(512 << 20), 0x80044102, 0x0001A000}, /* 512MB, 13x10(4) */
- {(256 << 20), 0x80040102, 0x00014000}, /* 256MB, 13x10(4) */
- {(128 << 20), 0x80040101, 0x0000C000}, /* 128MB, 13x9(4) */
-};
-#endif /* CONFIG_TQM8548_AG */
-#else /* !CONFIG_TQM8548 */
-sdram_conf_t ddr_cs_conf[] = {
- {(512 << 20), 0x80000202}, /* 512MB, 14x10(4) */
- {(256 << 20), 0x80000102}, /* 256MB, 13x10(4) */
- {(128 << 20), 0x80000101}, /* 128MB, 13x9(4) */
- {( 64 << 20), 0x80000001}, /* 64MB, 12x9(4) */
-};
-#endif /* CONFIG_TQM8548 */
-
-#define N_DDR_CS_CONF (sizeof(ddr_cs_conf) / sizeof(ddr_cs_conf[0]))
-
-int cas_latency (void);
-static phys_size_t sdram_setup(int);
-
-/*
- * Autodetect onboard DDR SDRAM on 85xx platforms
- *
- * NOTE: Some of the hardcoded values are hardware dependant,
- * so this should be extended for other future boards
- * using this routine!
- */
-phys_size_t fixed_sdram(void)
-{
- int casl = 0;
- phys_size_t dram_size = 0;
-
- casl = cas_latency();
- dram_size = sdram_setup(casl);
- if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) {
- /*
- * Try again with default CAS latency
- */
- printf("Problem with CAS lantency, using default CL %d/10!\n",
- CONFIG_DDR_DEFAULT_CL);
- dram_size = sdram_setup(CONFIG_DDR_DEFAULT_CL);
- puts(" ");
- }
- return dram_size;
-}
-
-static phys_size_t sdram_setup(int casl)
-{
- int i;
- volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-#ifdef CONFIG_TQM8548
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE)
- volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
-#endif
-#else /* !CONFIG_TQM8548 */
- unsigned long cfg_ddr_timing1;
- unsigned long cfg_ddr_mode;
-#endif /* CONFIG_TQM8548 */
-
- /*
- * Disable memory controller.
- */
- ddr->cs0_config = 0;
- ddr->sdram_cfg = 0;
-
-#ifdef CONFIG_TQM8548
- /* Timing and refresh settings for DDR2-533 and below */
-
- ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
- ddr->cs0_config = ddr_cs_conf[0].reg;
- ddr->timing_cfg_3 = 0x00020000;
-
- /* TIMING CFG 1, 533MHz
- * PRETOACT: 4 Clocks
- * ACTTOPRE: 12 Clocks
- * ACTTORW: 4 Clocks
- * CASLAT: 4 Clocks
- * REFREC: EXT_REFREC:REFREC 53 Clocks
- * WRREC: 4 Clocks
- * ACTTOACT: 3 Clocks
- * WRTORD: 2 Clocks
- */
- ddr->timing_cfg_1 = 0x4C47D432;
-
- /* TIMING CFG 2, 533MHz
- * ADD_LAT: 3 Clocks
- * CPO: READLAT + 1
- * WR_LAT: 3 Clocks
- * RD_TO_PRE: 2 Clocks
- * WR_DATA_DELAY: 1/2 Clock
- * CKE_PLS: 3 Clock
- * FOUR_ACT: 14 Clocks
- */
- ddr->timing_cfg_2 = 0x331848CE;
-
- /* DDR SDRAM Mode, 533MHz
- * MRS: Extended Mode Register
- * OUT: Outputs enabled
- * RDQS: no
- * DQS: enabled
- * OCD: default state
- * RTT: 75 Ohms
- * Posted CAS: 3 Clocks
- * ODS: reduced strength
- * DLL: enabled
- * MR: Mode Register
- * PD: fast exit
- * WR: 4 Clocks
- * DLL: no DLL reset
- * TM: normal
- * CAS latency: 4 Clocks
- * BT: sequential
- * Burst length: 4
- */
- ddr->sdram_mode = 0x439E0642;
-
- /* DDR SDRAM Interval, 533MHz
- * REFINT: 1040 Clocks
- * BSTOPRE: 256
- */
- ddr->sdram_interval = (1040 << 16) | 0x100;
-
- /*
- * Workaround for erratum DDR19 according to MPC8548 Device Errata
- * document, Rev. 1: DDR IO receiver must be set to an acceptable
- * bias point by modifying a hidden register.
- */
- if (SVR_REV (get_svr ()) < 0x21)
- gur->ddrioovcr = 0x90000000; /* enable, VSEL 1.8V */
-
- /* DDR SDRAM CFG 2
- * FRC_SR: normal mode
- * SR_IE: no self-refresh interrupt
- * DLL_RST_DIS: don't care, leave at reset value
- * DQS_CFG: differential DQS signals
- * ODT_CFG: assert ODT to internal IOs only during reads to DRAM
- * LVWx_CFG: don't care, leave at reset value
- * NUM_PR: 1 refresh will be issued at a time
- * DM_CFG: don't care, leave at reset value
- * D_INIT: no data initialization
- */
- ddr->sdram_cfg_2 = 0x04401000;
-
- /* DDR SDRAM MODE 2
- * MRS: Extended Mode Register 2
- */
- ddr->sdram_mode_2 = 0x8000C000;
-
- /* DDR SDRAM CLK CNTL
- * CLK_ADJUST: 1/2 Clock 0x02000000
- * CLK_ADJUST: 5/8 Clock 0x02800000
- */
- ddr->sdram_clk_cntl = 0x02800000;
-
- /* wait for clock stabilization */
- asm ("sync;isync;msync");
- udelay (1000);
-
-#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE)
- /*
- * Workaround for erratum DDR20 according to MPC8548 Device Errata
- * document, Rev. 1: "CKE signal may not function correctly after
- * assertion of HRESET"
- */
-
- /* 1. Configure DDR register as is done in normal DDR configuration.
- * Do not set DDR_SDRAM_CFG[MEM_EN].
- *
- * 2. Set reserved bit EEBACR[3] at offset 0x1000
- */
- ecm->eebacr |= 0x10000000;
-
- /*
- * 3. Before DDR_SDRAM_CFG[MEM_EN] is set, write DDR_SDRAM_CFG_2[D_INIT]
- *
- * DDR_SDRAM_CFG_2:
- * FRC_SR: normal mode
- * SR_IE: no self-refresh interrupt
- * DLL_RST_DIS: don't care, leave at reset value
- * DQS_CFG: differential DQS signals
- * ODT_CFG: assert ODT to internal IOs only during reads to DRAM
- * LVWx_CFG: don't care, leave at reset value
- * NUM_PR: 1 refresh will be issued at a time
- * DM_CFG: don't care, leave at reset value
- * D_INIT: enable data initialization
- */
- ddr->sdram_cfg_2 |= 0x00000010;
-
- /*
- * 4. Before DDR_SDRAM_CFG[MEM_EN] set, write D3[21] to disable data
- * training
- */
- ddr->debug[2] |= 0x00000400;
-
- /*
- * 5. Wait 200 micro-seconds
- */
- udelay (200);
-
- /*
- * 6. Set DDR_SDRAM_CFG[MEM_EN]
- *
- * BTW, initialize DDR_SDRAM_CFG:
- * MEM_EN: enabled
- * SREN: don't care, leave at reset value
- * ECC_EN: no error report
- * RD_EN: no registered DIMMs
- * SDRAM_TYPE: DDR2
- * DYN_PWR: no power management
- * 32_BE: don't care, leave at reset value
- * 8_BE: 4 beat burst
- * NCAP: don't care, leave at reset value
- * 2T_EN: 1T Timing
- * BA_INTLV_CTL: no interleaving
- * x32_EN: x16 organization
- * PCHB8: MA[10] for auto-precharge
- * HSE: half strength for single and 2-layer stacks
- * (full strength for 3- and 4-layer stacks not
- * yet considered)
- * MEM_HALT: no halt
- * BI: automatic initialization
- */
- ddr->sdram_cfg = 0x83000008;
-
- /*
- * 7. Poll DDR_SDRAM_CFG_2[D_INIT] until it is cleared by hardware
- */
- asm ("sync;isync;msync");
- while (ddr->sdram_cfg_2 & 0x00000010)
- asm ("eieio");
-
- /*
- * 8. Clear D3[21] to re-enable data training
- */
- ddr->debug[2] &= ~0x00000400;
-
- /*
- * 9. Set D2(21) to force data training to run
- */
- ddr->debug[1] |= 0x00000400;
-
- /*
- * 10. Poll on D2[21] until it is cleared by hardware
- */
- asm ("sync;isync;msync");
- while (ddr->debug[1] & 0x00000400)
- asm ("eieio");
-
- /*
- * 11. Clear reserved bit EEBACR[3] at offset 0x1000
- */
- ecm->eebacr &= ~0x10000000;
-
-#else /* !(CONFIG_TQM8548_AG || CONFIG_TQM8548_BE) */
-
- /* DDR SDRAM CLK CNTL
- * MEM_EN: enabled
- * SREN: don't care, leave at reset value
- * ECC_EN: no error report
- * RD_EN: no register DIMMs
- * SDRAM_TYPE: DDR2
- * DYN_PWR: no power management
- * 32_BE: don't care, leave at reset value
- * 8_BE: 4 beat burst
- * NCAP: don't care, leave at reset value
- * 2T_EN: 1T Timing
- * BA_INTLV_CTL: no interleaving
- * x32_EN: x16 organization
- * PCHB8: MA[10] for auto-precharge
- * HSE: half strength for single and 2-layer stacks
- * (full strength for 3- and 4-layer stacks no yet considered)
- * MEM_HALT: no halt
- * BI: automatic initialization
- */
- ddr->sdram_cfg = 0x83000008;
-
-#endif /* CONFIG_TQM8548_AG || CONFIG_TQM8548_BE */
-
- asm ("sync; isync; msync");
- udelay (1000);
-#else /* !CONFIG_TQM8548 */
- switch (casl) {
- case 20:
- cfg_ddr_timing1 = 0x47405331 | (3 << 16);
- cfg_ddr_mode = 0x40020002 | (2 << 4);
- break;
-
- case 25:
- cfg_ddr_timing1 = 0x47405331 | (4 << 16);
- cfg_ddr_mode = 0x40020002 | (6 << 4);
- break;
-
- case 30:
- default:
- cfg_ddr_timing1 = 0x47405331 | (5 << 16);
- cfg_ddr_mode = 0x40020002 | (3 << 4);
- break;
- }
-
- ddr->cs0_bnds = (ddr_cs_conf[0].size - 1) >> 24;
- ddr->cs0_config = ddr_cs_conf[0].reg;
- ddr->timing_cfg_1 = cfg_ddr_timing1;
- ddr->timing_cfg_2 = 0x00000800; /* P9-45,may need tuning */
- ddr->sdram_mode = cfg_ddr_mode;
- ddr->sdram_interval = 0x05160100; /* autocharge,no open page */
- ddr->err_disable = 0x0000000D;
-
- asm ("sync; isync; msync");
- udelay (1000);
-
- ddr->sdram_cfg = 0xc2000000; /* unbuffered,no DYN_PWR */
- asm ("sync; isync; msync");
- udelay (1000);
-#endif /* CONFIG_TQM8548 */
-
- /*
- * get_ram_size() depends on having tlbs for the DDR, but they are
- * not yet setup because we don't know the size. Set up a temp
- * mapping and delete it when done.
- */
- setup_ddr_tlbs(CONFIG_SYS_DDR_EARLY_SIZE_MB);
- for (i = 0; i < N_DDR_CS_CONF; i++) {
- ddr->cs0_config = ddr_cs_conf[i].reg;
-
- if (get_ram_size (0, ddr_cs_conf[i].size) ==
- ddr_cs_conf[i].size) {
- /*
- * size detected -> set Chip Select Bounds Register
- */
- ddr->cs0_bnds = (ddr_cs_conf[i].size - 1) >> 24;
-
- break;
- }
- }
- clear_ddr_tlbs(CONFIG_SYS_DDR_EARLY_SIZE_MB);
-
-#ifdef CONFIG_TQM8548
- if (i < N_DDR_CS_CONF) {
- /* Adjust refresh rate for DDR2 */
-
- ddr->timing_cfg_3 = ddr_cs_conf[i].refresh & 0x00070000;
-
- ddr->timing_cfg_1 = (ddr->timing_cfg_1 & 0xFFFF0FFF) |
- (ddr_cs_conf[i].refresh & 0x0000F000);
-
- return ddr_cs_conf[i].size;
- }
-#endif /* CONFIG_TQM8548 */
-
- /* return size if detected, else return 0 */
- return (i < N_DDR_CS_CONF) ? ddr_cs_conf[i].size : 0;
-}
-
-#if defined(CONFIG_SYS_DRAM_TEST)
-int testdram (void)
-{
- uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
- uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
- uint *p;
-
- printf ("SDRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf ("SDRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf ("SDRAM test passed.\n");
- return 0;
-}
-#endif
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
- /* TLB 0 - for temp stack in cache */
- SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
- MAS3_SX | MAS3_SW | MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
- MAS3_SX | MAS3_SW | MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
- MAS3_SX | MAS3_SW | MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
- MAS3_SX | MAS3_SW | MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
-
-#ifndef CONFIG_TQM_BIGFLASH
- /*
- * TLB 0, 1: 128M Non-cacheable, guarded
- * 0xf8000000 128M FLASH
- * Out of reset this entry is only 4K.
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 1, BOOKE_PAGESZ_64M, 1),
- SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x4000000,
- CONFIG_SYS_FLASH_BASE + 0x4000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 0, BOOKE_PAGESZ_64M, 1),
-
- /*
- * TLB 2: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 2, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 3: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
- CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 3, BOOKE_PAGESZ_256M, 1),
-
-#ifdef CONFIG_PCIE1
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xc0000000 256M PCI express MEM First half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BUS, CONFIG_SYS_PCIE1_MEM_BUS,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 4, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 5: 256M Non-cacheable, guarded
- * 0xd0000000 256M PCI express MEM Second half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BUS + 0x10000000,
- CONFIG_SYS_PCIE1_MEM_BUS + 0x10000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 5, BOOKE_PAGESZ_256M, 1),
-#else /* !CONFIG_PCIE */
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0xc0000000 256M Rapid IO MEM First half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 4, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 5: 256M Non-cacheable, guarded
- * 0xd0000000 256M Rapid IO MEM Second half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
- CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 5, BOOKE_PAGESZ_256M, 1),
-#endif /* CONFIG_PCIE */
-
- /*
- * TLB 6: 64M Non-cacheable, guarded
- * 0xe0000000 1M CCSRBAR
- * 0xe2000000 16M PCI1 IO
- * 0xe3000000 16M CAN and NAND Flash
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 6, BOOKE_PAGESZ_64M, 1),
-#ifdef CONFIG_PCIE1
- /*
- * TLB 9: 16M Non-cacheable, guarded
- * 0xef000000 16M PCI express IO
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_IO_BUS, CONFIG_SYS_PCIE1_IO_BUS,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 9, BOOKE_PAGESZ_16M, 1),
-#endif /* CONFIG_PCIE */
-
-#else /* CONFIG_TQM_BIGFLASH */
-
- /*
- * TLB 0,1,2,3: 1G Non-cacheable, guarded
- * 0xc0000000 1G FLASH
- * Out of reset this entry is only 4K.
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 3, BOOKE_PAGESZ_256M, 1),
- SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x10000000,
- CONFIG_SYS_FLASH_BASE + 0x10000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 2, BOOKE_PAGESZ_256M, 1),
- SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x20000000,
- CONFIG_SYS_FLASH_BASE + 0x20000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 1, BOOKE_PAGESZ_256M, 1),
- SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x30000000,
- CONFIG_SYS_FLASH_BASE + 0x30000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 0, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 4: 256M Non-cacheable, guarded
- * 0x80000000 256M PCI1 MEM First half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 4, BOOKE_PAGESZ_256M, 1),
-
- /*
- * TLB 5: 256M Non-cacheable, guarded
- * 0x90000000 256M PCI1 MEM Second half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
- CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 5, BOOKE_PAGESZ_256M, 1),
-
-#ifdef CONFIG_PCIE1
- /*
- * TLB 6: 256M Non-cacheable, guarded
- * 0xc0000000 256M PCI express MEM First half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BUS, CONFIG_SYS_PCIE1_MEM_BUS,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 6, BOOKE_PAGESZ_256M, 1),
-#else /* !CONFIG_PCIE */
- /*
- * TLB 6: 256M Non-cacheable, guarded
- * 0xb0000000 256M Rapid IO MEM First half
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 6, BOOKE_PAGESZ_256M, 1),
-
-#endif /* CONFIG_PCIE */
-
- /*
- * TLB 7: 64M Non-cacheable, guarded
- * 0xa0000000 1M CCSRBAR
- * 0xa2000000 16M PCI1 IO
- * 0xa3000000 16M CAN and NAND Flash
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 7, BOOKE_PAGESZ_64M, 1),
-#ifdef CONFIG_PCIE1
- /*
- * TLB 10: 16M Non-cacheable, guarded
- * 0xaf000000 16M PCI express IO
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 10, BOOKE_PAGESZ_16M, 1),
-#endif /* CONFIG_PCIE */
-
-#endif /* CONFIG_TQM_BIGFLASH */
-};
-
-int num_tlb_entries = ARRAY_SIZE (tlb_table);
+++ /dev/null
-/*
- * (C) Copyright 2008 Wolfgang Grandegger <wg@denx.de>
- *
- * (C) Copyright 2006
- * Thomas Waehner, TQ-Systems GmbH, thomas.waehner@tqs.de.
- *
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2002,2003, Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_pci.h>
-#include <asm/io.h>
-#include <asm/fsl_serdes.h>
-#include <linux/compiler.h>
-#include <ioports.h>
-#include <flash.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[]; /* FLASH chips info */
-
-void local_bus_init (void);
-ulong flash_get_size (ulong base, int banknum);
-
-#ifdef CONFIG_PS2MULT
-void ps2mult_early_init (void);
-#endif
-
-#ifdef CONFIG_CPM2
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
- /* Port A: conf, ppar, psor, pdir, podr, pdat */
- {
- {1, 1, 1, 0, 0, 0}, /* PA31: FCC1 MII COL */
- {1, 1, 1, 0, 0, 0}, /* PA30: FCC1 MII CRS */
- {1, 1, 1, 1, 0, 0}, /* PA29: FCC1 MII TX_ER */
- {1, 1, 1, 1, 0, 0}, /* PA28: FCC1 MII TX_EN */
- {1, 1, 1, 0, 0, 0}, /* PA27: FCC1 MII RX_DV */
- {1, 1, 1, 0, 0, 0}, /* PA26: FCC1 MII RX_ER */
- {0, 1, 0, 1, 0, 0}, /* PA25: FCC1 ATMTXD[0] */
- {0, 1, 0, 1, 0, 0}, /* PA24: FCC1 ATMTXD[1] */
- {0, 1, 0, 1, 0, 0}, /* PA23: FCC1 ATMTXD[2] */
- {0, 1, 0, 1, 0, 0}, /* PA22: FCC1 ATMTXD[3] */
- {1, 1, 0, 1, 0, 0}, /* PA21: FCC1 MII TxD[3] */
- {1, 1, 0, 1, 0, 0}, /* PA20: FCC1 MII TxD[2] */
- {1, 1, 0, 1, 0, 0}, /* PA19: FCC1 MII TxD[1] */
- {1, 1, 0, 1, 0, 0}, /* PA18: FCC1 MII TxD[0] */
- {1, 1, 0, 0, 0, 0}, /* PA17: FCC1 MII RxD[0] */
- {1, 1, 0, 0, 0, 0}, /* PA16: FCC1 MII RxD[1] */
- {1, 1, 0, 0, 0, 0}, /* PA15: FCC1 MII RxD[2] */
- {1, 1, 0, 0, 0, 0}, /* PA14: FCC1 MII RxD[3] */
- {0, 1, 0, 0, 0, 0}, /* PA13: FCC1 ATMRXD[3] */
- {0, 1, 0, 0, 0, 0}, /* PA12: FCC1 ATMRXD[2] */
- {0, 1, 0, 0, 0, 0}, /* PA11: FCC1 ATMRXD[1] */
- {0, 1, 0, 0, 0, 0}, /* PA10: FCC1 ATMRXD[0] */
- {0, 1, 1, 1, 0, 0}, /* PA9 : FCC1 L1TXD */
- {0, 1, 1, 0, 0, 0}, /* PA8 : FCC1 L1RXD */
- {0, 0, 0, 1, 0, 0}, /* PA7 : PA7 */
- {0, 1, 1, 1, 0, 0}, /* PA6 : TDM A1 L1RSYNC */
- {0, 0, 0, 1, 0, 0}, /* PA5 : PA5 */
- {0, 0, 0, 1, 0, 0}, /* PA4 : PA4 */
- {0, 0, 0, 1, 0, 0}, /* PA3 : PA3 */
- {0, 0, 0, 1, 0, 0}, /* PA2 : PA2 */
- {0, 0, 0, 0, 0, 0}, /* PA1 : FREERUN */
- {0, 0, 0, 1, 0, 0} /* PA0 : PA0 */
- },
-
- /* Port B: conf, ppar, psor, pdir, podr, pdat */
- {
- {1, 1, 0, 1, 0, 0}, /* PB31: FCC2 MII TX_ER */
- {1, 1, 0, 0, 0, 0}, /* PB30: FCC2 MII RX_DV */
- {1, 1, 1, 1, 0, 0}, /* PB29: FCC2 MII TX_EN */
- {1, 1, 0, 0, 0, 0}, /* PB28: FCC2 MII RX_ER */
- {1, 1, 0, 0, 0, 0}, /* PB27: FCC2 MII COL */
- {1, 1, 0, 0, 0, 0}, /* PB26: FCC2 MII CRS */
- {1, 1, 0, 1, 0, 0}, /* PB25: FCC2 MII TxD[3] */
- {1, 1, 0, 1, 0, 0}, /* PB24: FCC2 MII TxD[2] */
- {1, 1, 0, 1, 0, 0}, /* PB23: FCC2 MII TxD[1] */
- {1, 1, 0, 1, 0, 0}, /* PB22: FCC2 MII TxD[0] */
- {1, 1, 0, 0, 0, 0}, /* PB21: FCC2 MII RxD[0] */
- {1, 1, 0, 0, 0, 0}, /* PB20: FCC2 MII RxD[1] */
- {1, 1, 0, 0, 0, 0}, /* PB19: FCC2 MII RxD[2] */
- {1, 1, 0, 0, 0, 0}, /* PB18: FCC2 MII RxD[3] */
- {1, 1, 0, 0, 0, 0}, /* PB17: FCC3:RX_DIV */
- {1, 1, 0, 0, 0, 0}, /* PB16: FCC3:RX_ERR */
- {1, 1, 0, 1, 0, 0}, /* PB15: FCC3:TX_ERR */
- {1, 1, 0, 1, 0, 0}, /* PB14: FCC3:TX_EN */
- {1, 1, 0, 0, 0, 0}, /* PB13: FCC3:COL */
- {1, 1, 0, 0, 0, 0}, /* PB12: FCC3:CRS */
- {1, 1, 0, 0, 0, 0}, /* PB11: FCC3:RXD */
- {1, 1, 0, 0, 0, 0}, /* PB10: FCC3:RXD */
- {1, 1, 0, 0, 0, 0}, /* PB9 : FCC3:RXD */
- {1, 1, 0, 0, 0, 0}, /* PB8 : FCC3:RXD */
- {1, 1, 0, 1, 0, 0}, /* PB7 : FCC3:TXD */
- {1, 1, 0, 1, 0, 0}, /* PB6 : FCC3:TXD */
- {1, 1, 0, 1, 0, 0}, /* PB5 : FCC3:TXD */
- {1, 1, 0, 1, 0, 0}, /* PB4 : FCC3:TXD */
- {0, 0, 0, 0, 0, 0}, /* PB3 : pin doesn't exist */
- {0, 0, 0, 0, 0, 0}, /* PB2 : pin doesn't exist */
- {0, 0, 0, 0, 0, 0}, /* PB1 : pin doesn't exist */
- {0, 0, 0, 0, 0, 0} /* PB0 : pin doesn't exist */
- },
-
- /* Port C: conf, ppar, psor, pdir, podr, pdat */
- {
- {0, 0, 0, 1, 0, 0}, /* PC31: PC31 */
- {0, 0, 0, 1, 0, 0}, /* PC30: PC30 */
- {0, 1, 1, 0, 0, 0}, /* PC29: SCC1 EN *CLSN */
- {0, 0, 0, 1, 0, 0}, /* PC28: PC28 */
- {0, 0, 0, 1, 0, 0}, /* PC27: UART Clock in */
- {0, 0, 0, 1, 0, 0}, /* PC26: PC26 */
- {0, 0, 0, 1, 0, 0}, /* PC25: PC25 */
- {0, 0, 0, 1, 0, 0}, /* PC24: PC24 */
- {0, 1, 0, 1, 0, 0}, /* PC23: ATMTFCLK */
- {0, 1, 0, 0, 0, 0}, /* PC22: ATMRFCLK */
- {1, 1, 0, 0, 0, 0}, /* PC21: SCC1 EN RXCLK */
- {1, 1, 0, 0, 0, 0}, /* PC20: SCC1 EN TXCLK */
- {1, 1, 0, 0, 0, 0}, /* PC19: FCC2 MII RX_CLK CLK13 */
- {1, 1, 0, 0, 0, 0}, /* PC18: FCC Tx Clock (CLK14) */
- {1, 1, 0, 0, 0, 0}, /* PC17: PC17 */
- {1, 1, 0, 0, 0, 0}, /* PC16: FCC Tx Clock (CLK16) */
- {0, 1, 0, 0, 0, 0}, /* PC15: PC15 */
- {0, 1, 0, 0, 0, 0}, /* PC14: SCC1 EN *CD */
- {0, 1, 0, 0, 0, 0}, /* PC13: PC13 */
- {0, 1, 0, 1, 0, 0}, /* PC12: PC12 */
- {0, 0, 0, 1, 0, 0}, /* PC11: LXT971 transmit control */
- {0, 0, 0, 1, 0, 0}, /* PC10: FETHMDC */
- {0, 0, 0, 0, 0, 0}, /* PC9 : FETHMDIO */
- {0, 0, 0, 1, 0, 0}, /* PC8 : PC8 */
- {0, 0, 0, 1, 0, 0}, /* PC7 : PC7 */
- {0, 0, 0, 1, 0, 0}, /* PC6 : PC6 */
- {0, 0, 0, 1, 0, 0}, /* PC5 : PC5 */
- {0, 0, 0, 1, 0, 0}, /* PC4 : PC4 */
- {0, 0, 0, 1, 0, 0}, /* PC3 : PC3 */
- {0, 0, 0, 1, 0, 1}, /* PC2 : ENET FDE */
- {0, 0, 0, 1, 0, 0}, /* PC1 : ENET DSQE */
- {0, 0, 0, 1, 0, 0}, /* PC0 : ENET LBK */
- },
-
- /* Port D: conf, ppar, psor, pdir, podr, pdat */
- {
-#ifdef CONFIG_TQM8560
- {1, 1, 0, 0, 0, 0}, /* PD31: SCC1 EN RxD */
- {1, 1, 1, 1, 0, 0}, /* PD30: SCC1 EN TxD */
- {1, 1, 0, 1, 0, 0}, /* PD29: SCC1 EN TENA */
-#else /* !CONFIG_TQM8560 */
- {0, 0, 0, 0, 0, 0}, /* PD31: PD31 */
- {0, 0, 0, 0, 0, 0}, /* PD30: PD30 */
- {0, 0, 0, 0, 0, 0}, /* PD29: PD29 */
-#endif /* CONFIG_TQM8560 */
- {1, 1, 0, 0, 0, 0}, /* PD28: PD28 */
- {1, 1, 0, 1, 0, 0}, /* PD27: PD27 */
- {1, 1, 0, 1, 0, 0}, /* PD26: PD26 */
- {0, 0, 0, 1, 0, 0}, /* PD25: PD25 */
- {0, 0, 0, 1, 0, 0}, /* PD24: PD24 */
- {0, 0, 0, 1, 0, 0}, /* PD23: PD23 */
- {0, 0, 0, 1, 0, 0}, /* PD22: PD22 */
- {0, 0, 0, 1, 0, 0}, /* PD21: PD21 */
- {0, 0, 0, 1, 0, 0}, /* PD20: PD20 */
- {0, 0, 0, 1, 0, 0}, /* PD19: PD19 */
- {0, 0, 0, 1, 0, 0}, /* PD18: PD18 */
- {0, 1, 0, 0, 0, 0}, /* PD17: FCC1 ATMRXPRTY */
- {0, 1, 0, 1, 0, 0}, /* PD16: FCC1 ATMTXPRTY */
- {0, 1, 1, 0, 1, 0}, /* PD15: I2C SDA */
- {0, 0, 0, 1, 0, 0}, /* PD14: LED */
- {0, 0, 0, 0, 0, 0}, /* PD13: PD13 */
- {0, 0, 0, 0, 0, 0}, /* PD12: PD12 */
- {0, 0, 0, 0, 0, 0}, /* PD11: PD11 */
- {0, 0, 0, 0, 0, 0}, /* PD10: PD10 */
- {0, 1, 0, 1, 0, 0}, /* PD9 : SMC1 TXD */
- {0, 1, 0, 0, 0, 0}, /* PD8 : SMC1 RXD */
- {0, 0, 0, 1, 0, 1}, /* PD7 : PD7 */
- {0, 0, 0, 1, 0, 1}, /* PD6 : PD6 */
- {0, 0, 0, 1, 0, 1}, /* PD5 : PD5 */
- {0, 0, 0, 1, 0, 1}, /* PD4 : PD4 */
- {0, 0, 0, 0, 0, 0}, /* PD3 : pin doesn't exist */
- {0, 0, 0, 0, 0, 0}, /* PD2 : pin doesn't exist */
- {0, 0, 0, 0, 0, 0}, /* PD1 : pin doesn't exist */
- {0, 0, 0, 0, 0, 0} /* PD0 : pin doesn't exist */
- }
-};
-#endif /* CONFIG_CPM2 */
-
-#define CASL_STRING1 "casl=xx"
-#define CASL_STRING2 "casl="
-
-static const int casl_table[] = { 20, 25, 30 };
-#define N_CASL (sizeof(casl_table) / sizeof(casl_table[0]))
-
-int cas_latency (void)
-{
- char buf[128];
- int casl;
- int val;
- int i;
-
- casl = CONFIG_DDR_DEFAULT_CL;
-
- i = getenv_f("serial#", buf, sizeof(buf));
-
- if (i >0) {
- if (strncmp(buf + strlen (buf) - strlen (CASL_STRING1),
- CASL_STRING2, strlen (CASL_STRING2)) == 0) {
- val = simple_strtoul (buf + strlen (buf) - 2, NULL, 10);
-
- for (i = 0; i < N_CASL; ++i) {
- if (val == casl_table[i]) {
- return val;
- }
- }
- }
- }
-
- return casl;
-}
-
-int checkboard (void)
-{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
-
- printf ("Board: %s", CONFIG_BOARDNAME);
- if (i > 0) {
- puts(", serial# ");
- puts(buf);
- }
- putc ('\n');
-
- /*
- * Initialize local bus.
- */
- local_bus_init ();
-
- return 0;
-}
-
-int misc_init_r (void)
-{
- /*
- * Adjust flash start and offset to detected values
- */
- gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
- gd->bd->bi_flashoffset = 0;
-
- /*
- * Recalculate CS configuration if second FLASH bank is available
- */
- if (flash_info[0].size > 0) {
- set_lbc_or(1, ((-flash_info[0].size) & 0xffff8000) |
- (CONFIG_SYS_OR1_PRELIM & 0x00007fff));
- set_lbc_br(1, gd->bd->bi_flashstart |
- (CONFIG_SYS_BR1_PRELIM & 0x00007fff));
- /*
- * Re-check to get correct base address for bank 1
- */
- flash_get_size (gd->bd->bi_flashstart, 0);
- } else {
- set_lbc_or(1, 0);
- set_lbc_br(1, 0);
- }
-
- /*
- * If bank 1 is equipped, bank 0 is mapped after bank 1
- */
- set_lbc_or(0, ((-flash_info[1].size) & 0xffff8000) |
- (CONFIG_SYS_OR0_PRELIM & 0x00007fff));
- set_lbc_br(0, (gd->bd->bi_flashstart + flash_info[0].size) |
- (CONFIG_SYS_BR0_PRELIM & 0x00007fff));
-
- /*
- * Re-check to get correct base address for bank 0
- */
- flash_get_size (gd->bd->bi_flashstart + flash_info[0].size, 1);
-
- /*
- * Re-do flash protection upon new addresses
- */
- flash_protect (FLAG_PROTECT_CLEAR,
- gd->bd->bi_flashstart, 0xffffffff,
- &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
- /* Monitor protection ON by default */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE, 0xffffffff,
- &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
- /* Environment protection ON by default */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
- /* Redundant environment protection ON by default */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
-#endif
-
- return 0;
-}
-
-#ifdef CONFIG_CAN_DRIVER
-/*
- * Initialize UPMC RAM
- */
-static void upmc_write (u_char addr, uint val)
-{
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-
- out_be32 (&lbc->mdr, val);
-
- clrsetbits_be32(&lbc->mcmr, MxMR_MAD_MSK,
- MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
-
- /* dummy access to perform write */
- out_8 ((void __iomem *)CONFIG_SYS_CAN_BASE, 0);
-
- /* normal operation */
- clrbits_be32(&lbc->mcmr, MxMR_OP_WARR);
-}
-#endif /* CONFIG_CAN_DRIVER */
-
-uint get_lbc_clock (void)
-{
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
- sys_info_t sys_info;
- ulong clkdiv = lbc->lcrr & LCRR_CLKDIV;
-
- get_sys_info (&sys_info);
-
- if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
-#ifdef CONFIG_MPC8548
- /*
- * Yes, the entire PQ38 family use the same
- * bit-representation for twice the clock divider value.
- */
- clkdiv *= 2;
-#endif
- return sys_info.freqSystemBus / clkdiv;
- }
-
- puts("Invalid clock divider value in CONFIG_SYS_LBC_LCRR\n");
-
- return 0;
-}
-
-/*
- * Initialize Local Bus
- */
-void local_bus_init (void)
-{
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
- uint lbc_mhz = get_lbc_clock () / 1000000;
-
-#ifdef CONFIG_MPC8548
- uint svr = get_svr ();
- uint lcrr;
-
- /*
- * MPC revision < 2.0
- * According to MPC8548E_Device_Errata Rev. L, Erratum LBIU1:
- * Modify engineering use only register at address 0xE_0F20.
- * "1. Read register at offset 0xE_0F20
- * 2. And value with 0x0000_FFFF
- * 3. OR result with 0x0000_0004
- * 4. Write result back to offset 0xE_0F20."
- *
- * According to MPC8548E_Device_Errata Rev. L, Erratum LBIU2:
- * Modify engineering use only register at address 0xE_0F20.
- * "1. Read register at offset 0xE_0F20
- * 2. And value with 0xFFFF_FFDF
- * 3. Write result back to offset 0xE_0F20."
- *
- * Since it is the same register, we do the modification in one step.
- */
- if (SVR_MAJ (svr) < 2) {
- uint dummy = gur->lbiuiplldcr1;
- dummy &= 0x0000FFDF;
- dummy |= 0x00000004;
- gur->lbiuiplldcr1 = dummy;
- }
-
- lcrr = CONFIG_SYS_LBC_LCRR;
-
- /*
- * Local Bus Clock > 83.3 MHz. According to timing
- * specifications set LCRR[EADC] to 2 delay cycles.
- */
- if (lbc_mhz > 83) {
- lcrr &= ~LCRR_EADC;
- lcrr |= LCRR_EADC_2;
- }
-
- /*
- * According to MPC8548ERMAD Rev. 1.3, 13.3.1.16, 13-30
- * disable PLL bypass for Local Bus Clock > 83 MHz.
- */
- if (lbc_mhz >= 66)
- lcrr &= (~LCRR_DBYP); /* DLL Enabled */
-
- else
- lcrr |= LCRR_DBYP; /* DLL Bypass */
-
- lbc->lcrr = lcrr;
- asm ("sync;isync;msync");
-
- /*
- * According to MPC8548ERMAD Rev.1.3 read back LCRR
- * and terminate with isync
- */
- lcrr = lbc->lcrr;
- asm ("isync;");
-
- /* let DLL stabilize */
- udelay (500);
-
-#else /* !CONFIG_MPC8548 */
-
- /*
- * Errata LBC11.
- * Fix Local Bus clock glitch when DLL is enabled.
- *
- * If localbus freq is < 66MHz, DLL bypass mode must be used.
- * If localbus freq is > 133MHz, DLL can be safely enabled.
- * Between 66 and 133, the DLL is enabled with an override workaround.
- */
-
- if (lbc_mhz < 66) {
- lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */
- lbc->ltedr = LTEDR_BMD | LTEDR_PARD | LTEDR_WPD | LTEDR_WARA |
- LTEDR_RAWA | LTEDR_CSD; /* Disable all error checking */
-
- } else if (lbc_mhz >= 133) {
- lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
-
- } else {
- /*
- * On REV1 boards, need to change CLKDIV before enable DLL.
- * Default CLKDIV is 8, change it to 4 temporarily.
- */
- uint pvr = get_pvr ();
- uint temp_lbcdll = 0;
-
- if (pvr == PVR_85xx_REV1) {
- /* FIXME: Justify the high bit here. */
- lbc->lcrr = 0x10000004;
- }
-
- lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
- udelay (200);
-
- /*
- * Sample LBC DLL ctrl reg, upshift it to set the
- * override bits.
- */
- temp_lbcdll = gur->lbcdllcr;
- gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
- asm ("sync;isync;msync");
- }
-#endif /* !CONFIG_MPC8548 */
-
-#ifdef CONFIG_CAN_DRIVER
- /*
- * According to timing specifications EAD must be
- * set if Local Bus Clock is > 83 MHz.
- */
- if (lbc_mhz > 83)
- set_lbc_or(2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD);
- else
- set_lbc_or(2, CONFIG_SYS_OR2_CAN);
- set_lbc_br(2, CONFIG_SYS_BR2_CAN);
-
- /* LGPL4 is UPWAIT */
- out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X);
-
- /* Initialize UPMC for CAN: single read */
- upmc_write (0x00, 0xFFFFED00);
- upmc_write (0x01, 0xCCFFCC00);
- upmc_write (0x02, 0x00FFCF00);
- upmc_write (0x03, 0x00FFCF00);
- upmc_write (0x04, 0x00FFDC00);
- upmc_write (0x05, 0x00FFCF00);
- upmc_write (0x06, 0x00FFED00);
- upmc_write (0x07, 0x3FFFCC07);
-
- /* Initialize UPMC for CAN: single write */
- upmc_write (0x18, 0xFFFFED00);
- upmc_write (0x19, 0xCCFFEC00);
- upmc_write (0x1A, 0x00FFED80);
- upmc_write (0x1B, 0x00FFED80);
- upmc_write (0x1C, 0x00FFFC00);
- upmc_write (0x1D, 0x0FFFEC00);
- upmc_write (0x1E, 0x0FFFEF00);
- upmc_write (0x1F, 0x3FFFEC05);
-#endif /* CONFIG_CAN_DRIVER */
-}
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifdef CONFIG_PCI1
-static struct pci_controller pci1_hose;
-#endif /* CONFIG_PCI1 */
-
-void pci_init_board (void)
-{
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- int first_free_busno = 0;
-#ifdef CONFIG_PCI1
- struct fsl_pci_info pci_info;
- int pcie_ep;
-
- u32 devdisr = in_be32(&gur->devdisr);
-
- uint pci_32 = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_PCI32;
- uint pci_arb = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_ARB;
- uint pci_speed = CONFIG_SYS_CLK_FREQ; /* PCI PSPEED in [4:5] */
- uint pci_clk_sel = in_be32(&gur->porpllsr) & MPC85xx_PORDEVSR_PCI1_SPD;
-
- if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
- SET_STD_PCI_INFO(pci_info, 1);
- set_next_law(pci_info.mem_phys,
- law_size_bits(pci_info.mem_size), pci_info.law);
- set_next_law(pci_info.io_phys,
- law_size_bits(pci_info.io_size), pci_info.law);
-
- pcie_ep = fsl_setup_hose(&pci1_hose, pci_info.regs);
- printf("PCI1: %d bit, %s MHz, %s, %s, %s\n",
- (pci_32) ? 32 : 64,
- (pci_speed == 33333333) ? "33" :
- (pci_speed == 66666666) ? "66" : "unknown",
- pci_clk_sel ? "sync" : "async",
- pcie_ep ? "agent" : "host",
- pci_arb ? "arbiter" : "external-arbiter");
- first_free_busno = fsl_pci_init_port(&pci_info,
- &pci1_hose, first_free_busno);
-#ifdef CONFIG_PCIX_CHECK
- if (!(in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1)) {
- ushort reg16 =
- PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ |
- PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
- uint dev = PCI_BDF(0, 0, 0);
-
- /* PCI-X init */
- if (CONFIG_SYS_CLK_FREQ < 66000000)
- puts ("PCI-X will only work at 66 MHz\n");
-
- pci_write_config_word(dev, PCIX_COMMAND, reg16);
- }
-#endif
- } else {
- printf("PCI1: disabled\n");
- }
-#else
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1);
-#endif
-
- fsl_pcie_init_board(first_free_busno);
-}
-
-#ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup (void *blob, bd_t *bd)
-{
- ft_cpu_setup (blob, bd);
-
- FT_FSL_PCI_SETUP;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
-
-#ifdef CONFIG_BOARD_EARLY_INIT_R
-int board_early_init_r (void)
-{
-#ifdef CONFIG_PS2MULT
- ps2mult_early_init ();
-#endif /* CONFIG_PS2MULT */
- return (0);
-}
-#endif /* CONFIG_BOARD_EARLY_INIT_R */
-
-int board_eth_init(bd_t *bis)
-{
- cpu_eth_init(bis); /* Intialize TSECs first */
- return pci_eth_init(bis);
-}
drivers/pcmcia/libpcmcia.o (.text.pcmcia_hardware_enable)
drivers/rtc/librtc.o (.text*)
drivers/misc/libmisc.o (.text*)
- *(.text.print_buffer)
- *(.text.print_size)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv*)
stxgp3 powerpc mpc85xx stxgp3 stx
stxssa powerpc mpc85xx stxssa stx - stxssa
stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M
-TQM8540 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8540,TQM8540=y,HOSTNAME=tqm8540,BOARDNAME="TQM8540"
-TQM8541 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8541,TQM8541=y,HOSTNAME=tqm8541,BOARDNAME="TQM8541"
-TQM8548 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8548,TQM8548=y,HOSTNAME=tqm8548,BOARDNAME="TQM8548"
-TQM8548_AG powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8548,TQM8548_AG=y,HOSTNAME=tqm8485,BOARDNAME="TQM8548_AG"
-TQM8548_BE powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8548,TQM8548_BE=y,HOSTNAME=tqm8548,BOARDNAME="TQM8548_BE"
-TQM8555 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8555,TQM8555=y,HOSTNAME=tqm8555,BOARDNAME="TQM8555"
-TQM8560 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8560,TQM8560=y,HOSTNAME=tqm8560,BOARDNAME="TQM8560"
xpedite520x powerpc mpc85xx - xes
xpedite537x powerpc mpc85xx - xes
xpedite550x powerpc mpc85xx - xes
COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o
COBJS-$(CONFIG_CMD_IDE) += cmd_ide.o
COBJS-$(CONFIG_CMD_IMMAP) += cmd_immap.o
+COBJS-$(CONFIG_CMD_INI) += cmd_ini.o
COBJS-$(CONFIG_CMD_IRQ) += cmd_irq.o
COBJS-$(CONFIG_CMD_ITEST) += cmd_itest.o
COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
puts("No arch specific invalidate_icache_all available!\n");
}
-int do_icache ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_icache(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
switch (argc) {
case 2: /* on / off */
switch (parse_argv(argv[1])) {
- case 0: icache_disable();
+ case 0:
+ icache_disable();
break;
- case 1: icache_enable ();
+ case 1:
+ icache_enable();
break;
- case 2: invalidate_icache_all();
+ case 2:
+ invalidate_icache_all();
break;
}
- /* FALL TROUGH */
+ break;
case 1: /* get status */
- printf ("Instruction Cache is %s\n",
+ printf("Instruction Cache is %s\n",
icache_status() ? "ON" : "OFF");
return 0;
default:
/* please define arch specific flush_dcache_all */
}
-int do_dcache ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_dcache(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
switch (argc) {
- case 2: /* on / off */
+ case 2: /* on / off */
switch (parse_argv(argv[1])) {
- case 0: dcache_disable();
+ case 0:
+ dcache_disable();
break;
- case 1: dcache_enable ();
+ case 1:
+ dcache_enable();
break;
- case 2: flush_dcache_all();
+ case 2:
+ flush_dcache_all();
break;
}
- /* FALL TROUGH */
+ break;
case 1: /* get status */
- printf ("Data (writethrough) Cache is %s\n",
+ printf("Data (writethrough) Cache is %s\n",
dcache_status() ? "ON" : "OFF");
return 0;
default:
return CMD_RET_USAGE;
}
return 0;
-
}
static int parse_argv(const char *s)
{
- if (strcmp(s, "flush") == 0) {
- return (2);
- } else if (strcmp(s, "on") == 0) {
- return (1);
- } else if (strcmp(s, "off") == 0) {
- return (0);
- }
- return (-1);
+ if (strcmp(s, "flush") == 0)
+ return 2;
+ else if (strcmp(s, "on") == 0)
+ return 1;
+ else if (strcmp(s, "off") == 0)
+ return 0;
+
+ return -1;
}
int putnl = 1;
for (i = 1; i < argc; i++) {
- char *p = argv[i], c;
+ char *p = argv[i];
+ char *nls; /* new-line suppression */
if (i > 1)
putc(' ');
- while ((c = *p++) != '\0') {
- if (c == '\\' && *p == 'c') {
- putnl = 0;
- p++;
- } else {
- putc(c);
+
+ nls = strstr(p, "\\c");
+ if (nls) {
+ char *prenls = p;
+
+ putnl = 0;
+ /*
+ * be paranoid and guess that someone might
+ * say \c more than once
+ */
+ while (nls) {
+ *nls = '\0';
+ puts(prenls);
+ *nls = '\\';
+ prenls = nls + 2;
+ nls = strstr(prenls, "\\c");
}
+ puts(prenls);
+ } else {
+ puts(p);
}
}
--- /dev/null
+/*
+ * inih -- simple .INI file parser
+ *
+ * Copyright (c) 2009, Brush Technology
+ * Copyright (c) 2012:
+ * Joe Hershberger, National Instruments, joe.hershberger@ni.com
+ * All rights reserved.
+ *
+ * The "inih" library is distributed under the following license, which is
+ * derived from and very similar to the 3-clause BSD license:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Brush Technology nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BRUSH TECHNOLOGY ''AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL BRUSH TECHNOLOGY BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Go to the project home page for more info:
+ * http://code.google.com/p/inih/
+ */
+
+#include <common.h>
+#include <command.h>
+#include <environment.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+
+#ifdef CONFIG_INI_MAX_LINE
+#define MAX_LINE CONFIG_INI_MAX_LINE
+#else
+#define MAX_LINE 200
+#endif
+
+#ifdef CONFIG_INI_MAX_SECTION
+#define MAX_SECTION CONFIG_INI_MAX_SECTION
+#else
+#define MAX_SECTION 50
+#endif
+
+#ifdef CONFIG_INI_MAX_NAME
+#define MAX_NAME CONFIG_INI_MAX_NAME
+#else
+#define MAX_NAME 50
+#endif
+
+/* Strip whitespace chars off end of given string, in place. Return s. */
+static char *rstrip(char *s)
+{
+ char *p = s + strlen(s);
+
+ while (p > s && isspace(*--p))
+ *p = '\0';
+ return s;
+}
+
+/* Return pointer to first non-whitespace char in given string. */
+static char *lskip(const char *s)
+{
+ while (*s && isspace(*s))
+ s++;
+ return (char *)s;
+}
+
+/* Return pointer to first char c or ';' comment in given string, or pointer to
+ null at end of string if neither found. ';' must be prefixed by a whitespace
+ character to register as a comment. */
+static char *find_char_or_comment(const char *s, char c)
+{
+ int was_whitespace = 0;
+
+ while (*s && *s != c && !(was_whitespace && *s == ';')) {
+ was_whitespace = isspace(*s);
+ s++;
+ }
+ return (char *)s;
+}
+
+/* Version of strncpy that ensures dest (size bytes) is null-terminated. */
+static char *strncpy0(char *dest, const char *src, size_t size)
+{
+ strncpy(dest, src, size);
+ dest[size - 1] = '\0';
+ return dest;
+}
+
+/* Emulate the behavior of fgets but on memory */
+static char *memgets(char *str, int num, char **mem, size_t *memsize)
+{
+ char *end;
+ int len;
+ int newline = 1;
+
+ end = memchr(*mem, '\n', *memsize);
+ if (end == NULL) {
+ if (*memsize == 0)
+ return NULL;
+ end = *mem + *memsize;
+ newline = 0;
+ }
+ len = min((end - *mem) + newline, num);
+ memcpy(str, *mem, len);
+ if (len < num)
+ str[len] = '\0';
+
+ /* prepare the mem vars for the next call */
+ *memsize -= (end - *mem) + newline;
+ *mem += (end - *mem) + newline;
+
+ return str;
+}
+
+/* Parse given INI-style file. May have [section]s, name=value pairs
+ (whitespace stripped), and comments starting with ';' (semicolon). Section
+ is "" if name=value pair parsed before any section heading. name:value
+ pairs are also supported as a concession to Python's ConfigParser.
+
+ For each name=value pair parsed, call handler function with given user
+ pointer as well as section, name, and value (data only valid for duration
+ of handler call). Handler should return nonzero on success, zero on error.
+
+ Returns 0 on success, line number of first error on parse error (doesn't
+ stop on first error).
+*/
+static int ini_parse(char *filestart, size_t filelen,
+ int (*handler)(void *, char *, char *, char *), void *user)
+{
+ /* Uses a fair bit of stack (use heap instead if you need to) */
+ char line[MAX_LINE];
+ char section[MAX_SECTION] = "";
+ char prev_name[MAX_NAME] = "";
+
+ char *curmem = filestart;
+ char *start;
+ char *end;
+ char *name;
+ char *value;
+ size_t memleft = filelen;
+ int lineno = 0;
+ int error = 0;
+
+ /* Scan through file line by line */
+ while (memgets(line, sizeof(line), &curmem, &memleft) != NULL) {
+ lineno++;
+ start = lskip(rstrip(line));
+
+ if (*start == ';' || *start == '#') {
+ /*
+ * Per Python ConfigParser, allow '#' comments at start
+ * of line
+ */
+ }
+#if CONFIG_INI_ALLOW_MULTILINE
+ else if (*prev_name && *start && start > line) {
+ /*
+ * Non-blank line with leading whitespace, treat as
+ * continuation of previous name's value (as per Python
+ * ConfigParser).
+ */
+ if (!handler(user, section, prev_name, start) && !error)
+ error = lineno;
+ }
+#endif
+ else if (*start == '[') {
+ /* A "[section]" line */
+ end = find_char_or_comment(start + 1, ']');
+ if (*end == ']') {
+ *end = '\0';
+ strncpy0(section, start + 1, sizeof(section));
+ *prev_name = '\0';
+ } else if (!error) {
+ /* No ']' found on section line */
+ error = lineno;
+ }
+ } else if (*start && *start != ';') {
+ /* Not a comment, must be a name[=:]value pair */
+ end = find_char_or_comment(start, '=');
+ if (*end != '=')
+ end = find_char_or_comment(start, ':');
+ if (*end == '=' || *end == ':') {
+ *end = '\0';
+ name = rstrip(start);
+ value = lskip(end + 1);
+ end = find_char_or_comment(value, '\0');
+ if (*end == ';')
+ *end = '\0';
+ rstrip(value);
+ /* Strip double-quotes */
+ if (value[0] == '"' &&
+ value[strlen(value)-1] == '"') {
+ value[strlen(value)-1] = '\0';
+ value += 1;
+ }
+
+ /*
+ * Valid name[=:]value pair found, call handler
+ */
+ strncpy0(prev_name, name, sizeof(prev_name));
+ if (!handler(user, section, name, value) &&
+ !error)
+ error = lineno;
+ } else if (!error)
+ /* No '=' or ':' found on name[=:]value line */
+ error = lineno;
+ }
+ }
+
+ return error;
+}
+
+static int ini_handler(void *user, char *section, char *name, char *value)
+{
+ char *requested_section = (char *)user;
+#ifdef CONFIG_INI_CASE_INSENSITIVE
+ int i;
+
+ for (i = 0; i < strlen(requested_section); i++)
+ requested_section[i] = tolower(requested_section[i]);
+ for (i = 0; i < strlen(section); i++)
+ section[i] = tolower(section[i]);
+#endif
+
+ if (!strcmp(section, requested_section)) {
+#ifdef CONFIG_INI_CASE_INSENSITIVE
+ for (i = 0; i < strlen(name); i++)
+ name[i] = tolower(name[i]);
+ for (i = 0; i < strlen(value); i++)
+ value[i] = tolower(value[i]);
+#endif
+ setenv(name, value);
+ printf("ini: Imported %s as %s\n", name, value);
+ }
+
+ /* success */
+ return 1;
+}
+
+static int do_ini(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ const char *section;
+ char *file_address;
+ size_t file_size;
+
+ if (argc == 1)
+ return CMD_RET_USAGE;
+
+ section = argv[1];
+ file_address = (char *)simple_strtoul(
+ argc < 3 ? getenv("loadaddr") : argv[2], NULL, 16);
+ file_size = (size_t)simple_strtoul(
+ argc < 4 ? getenv("filesize") : argv[3], NULL, 16);
+
+ return ini_parse(file_address, file_size, ini_handler, (void *)section);
+}
+
+U_BOOT_CMD(
+ ini, 4, 0, do_ini,
+ "parse an ini file in memory and merge the specified section into the env",
+ "section [[file-address] file-size]"
+);
/*
+ * (C) Copyright 2011
+ * Joe Hershberger, National Instruments, joe.hershberger@ni.com
+ *
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
#include <command.h>
#include <u-boot/md5.h>
+/*
+ * Store the resulting sum to an address or variable
+ */
+static void store_result(const u8 *sum, const char *dest)
+{
+ unsigned int i;
+
+ if (*dest == '*') {
+ u8 *ptr;
+
+ ptr = (u8 *)simple_strtoul(dest + 1, NULL, 16);
+ for (i = 0; i < 16; i++)
+ *ptr++ = sum[i];
+ } else {
+ char str_output[33];
+ char *str_ptr = str_output;
+
+ for (i = 0; i < 16; i++) {
+ sprintf(str_ptr, "%02x", sum[i]);
+ str_ptr += 2;
+ }
+ str_ptr = '\0';
+ setenv(dest, str_output);
+ }
+}
+
+#ifdef CONFIG_MD5SUM_VERIFY
+static int parse_verify_sum(char *verify_str, u8 *vsum)
+{
+ if (*verify_str == '*') {
+ u8 *ptr;
+
+ ptr = (u8 *)simple_strtoul(verify_str + 1, NULL, 16);
+ memcpy(vsum, ptr, 16);
+ } else {
+ unsigned int i;
+ char *vsum_str;
+
+ if (strlen(verify_str) == 32)
+ vsum_str = verify_str;
+ else {
+ vsum_str = getenv(verify_str);
+ if (vsum_str == NULL || strlen(vsum_str) != 32)
+ return 1;
+ }
+
+ for (i = 0; i < 16; i++) {
+ char *nullp = vsum_str + (i + 1) * 2;
+ char end = *nullp;
+
+ *nullp = '\0';
+ *(u8 *)(vsum + i) =
+ simple_strtoul(vsum_str + (i * 2), NULL, 16);
+ *nullp = end;
+ }
+ }
+ return 0;
+}
+
+int do_md5sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ ulong addr, len;
+ unsigned int i;
+ u8 output[16];
+ u8 vsum[16];
+ int verify = 0;
+ int ac;
+ char * const *av;
+
+ if (argc < 3)
+ return CMD_RET_USAGE;
+
+ av = argv + 1;
+ ac = argc - 1;
+ if (strcmp(*av, "-v") == 0) {
+ verify = 1;
+ av++;
+ ac--;
+ if (ac < 3)
+ return CMD_RET_USAGE;
+ }
+
+ addr = simple_strtoul(*av++, NULL, 16);
+ len = simple_strtoul(*av++, NULL, 16);
+
+ md5_wd((unsigned char *) addr, len, output, CHUNKSZ_MD5);
+
+ if (!verify) {
+ printf("md5 for %08lx ... %08lx ==> ", addr, addr + len - 1);
+ for (i = 0; i < 16; i++)
+ printf("%02x", output[i]);
+ printf("\n");
+
+ if (ac > 2)
+ store_result(output, *av);
+ } else {
+ char *verify_str = *av++;
+
+ if (parse_verify_sum(verify_str, vsum)) {
+ printf("ERROR: %s does not contain a valid md5 sum\n",
+ verify_str);
+ return 1;
+ }
+ if (memcmp(output, vsum, 16) != 0) {
+ printf("md5 for %08lx ... %08lx ==> ", addr,
+ addr + len - 1);
+ for (i = 0; i < 16; i++)
+ printf("%02x", output[i]);
+ printf(" != ");
+ for (i = 0; i < 16; i++)
+ printf("%02x", vsum[i]);
+ printf(" ** ERROR **\n");
+ return 1;
+ }
+ }
+
+ return 0;
+}
+#else
static int do_md5sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
unsigned long addr, len;
printf("%02x", output[i]);
printf("\n");
+ if (argc > 3)
+ store_result(output, argv[3]);
+
return 0;
}
+#endif
+#ifdef CONFIG_MD5SUM_VERIFY
+U_BOOT_CMD(
+ md5sum, 5, 1, do_md5sum,
+ "compute MD5 message digest",
+ "address count [[*]sum]\n"
+ " - compute MD5 message digest [save to sum]\n"
+ "md5sum -v address count [*]sum\n"
+ " - verify md5sum of memory area"
+);
+#else
U_BOOT_CMD(
- md5sum, 3, 1, do_md5sum,
+ md5sum, 4, 1, do_md5sum,
"compute MD5 message digest",
- "address count"
+ "address count [[*]sum]\n"
+ " - compute MD5 message digest [save to sum]"
);
+#endif
"N\n"
" - delay execution for N seconds (N is _decimal_ !!!)"
);
+
+#ifdef CONFIG_CMD_TIMER
+static int do_timer(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ static ulong start;
+
+ if (argc != 2)
+ return CMD_RET_USAGE;
+
+ if (!strcmp(argv[1], "start"))
+ start = get_timer(0);
+
+ if (!strcmp(argv[1], "get")) {
+ ulong msecs = get_timer(start) * 1000 / CONFIG_SYS_HZ;
+ printf("%ld.%03d\n", msecs / 1000, (int)(msecs % 1000));
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ timer, 2, 1, do_timer,
+ "access the system timer",
+ "start - Reset the timer reference.\n"
+ "timer get - Print the time since 'start'."
+);
+#endif
{
int console = -1;
+ /* Default value for NULL to protect string-manipulating functions */
+ newval = newval ? : "";
+
/* Check for console redirection */
if (strcmp(name, "stdin") == 0)
console = stdin;
/*
+ * (C) Copyright 2011
+ * Joe Hershberger, National Instruments, joe.hershberger@ni.com
+ *
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
#include <command.h>
#include <sha1.h>
+/*
+ * Store the resulting sum to an address or variable
+ */
+static void store_result(const u8 *sum, const char *dest)
+{
+ unsigned int i;
+
+ if (*dest == '*') {
+ u8 *ptr;
+
+ ptr = (u8 *)simple_strtoul(dest + 1, NULL, 16);
+ for (i = 0; i < 20; i++)
+ *ptr++ = sum[i];
+ } else {
+ char str_output[41];
+ char *str_ptr = str_output;
+
+ for (i = 0; i < 20; i++) {
+ sprintf(str_ptr, "%02x", sum[i]);
+ str_ptr += 2;
+ }
+ str_ptr = '\0';
+ setenv(dest, str_output);
+ }
+}
+
+#ifdef CONFIG_SHA1SUM_VERIFY
+static int parse_verify_sum(char *verify_str, u8 *vsum)
+{
+ if (*verify_str == '*') {
+ u8 *ptr;
+
+ ptr = (u8 *)simple_strtoul(verify_str + 1, NULL, 16);
+ memcpy(vsum, ptr, 20);
+ } else {
+ unsigned int i;
+ char *vsum_str;
+
+ if (strlen(verify_str) == 40)
+ vsum_str = verify_str;
+ else {
+ vsum_str = getenv(verify_str);
+ if (vsum_str == NULL || strlen(vsum_str) != 40)
+ return 1;
+ }
+
+ for (i = 0; i < 20; i++) {
+ char *nullp = vsum_str + (i + 1) * 2;
+ char end = *nullp;
+
+ *nullp = '\0';
+ *(u8 *)(vsum + i) =
+ simple_strtoul(vsum_str + (i * 2), NULL, 16);
+ *nullp = end;
+ }
+ }
+ return 0;
+}
+
+int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ ulong addr, len;
+ unsigned int i;
+ u8 output[20];
+ u8 vsum[20];
+ int verify = 0;
+ int ac;
+ char * const *av;
+
+ if (argc < 3)
+ return CMD_RET_USAGE;
+
+ av = argv + 1;
+ ac = argc - 1;
+ if (strcmp(*av, "-v") == 0) {
+ verify = 1;
+ av++;
+ ac--;
+ if (ac < 3)
+ return CMD_RET_USAGE;
+ }
+
+ addr = simple_strtoul(*av++, NULL, 16);
+ len = simple_strtoul(*av++, NULL, 16);
+
+ sha1_csum_wd((unsigned char *) addr, len, output, CHUNKSZ_SHA1);
+
+ if (!verify) {
+ printf("SHA1 for %08lx ... %08lx ==> ", addr, addr + len - 1);
+ for (i = 0; i < 20; i++)
+ printf("%02x", output[i]);
+ printf("\n");
+
+ if (ac > 2)
+ store_result(output, *av);
+ } else {
+ char *verify_str = *av++;
+
+ if (parse_verify_sum(verify_str, vsum)) {
+ printf("ERROR: %s does not contain a valid SHA1 sum\n",
+ verify_str);
+ return 1;
+ }
+ if (memcmp(output, vsum, 20) != 0) {
+ printf("SHA1 for %08lx ... %08lx ==> ", addr,
+ addr + len - 1);
+ for (i = 0; i < 20; i++)
+ printf("%02x", output[i]);
+ printf(" != ");
+ for (i = 0; i < 20; i++)
+ printf("%02x", vsum[i]);
+ printf(" ** ERROR **\n");
+ return 1;
+ }
+ }
+
+ return 0;
+}
+#else
static int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
unsigned long addr, len;
printf("%02x", output[i]);
printf("\n");
+ if (argc > 3)
+ store_result(output, argv[3]);
+
return 0;
}
+#endif
+#ifdef CONFIG_SHA1SUM_VERIFY
+U_BOOT_CMD(
+ sha1sum, 5, 1, do_sha1sum,
+ "compute SHA1 message digest",
+ "address count [[*]sum]\n"
+ " - compute SHA1 message digest [save to sum]\n"
+ "sha1sum -v address count [*]sum\n"
+ " - verify sha1sum of memory area"
+);
+#else
U_BOOT_CMD(
- sha1sum, 3, 1, do_sha1sum,
+ sha1sum, 4, 1, do_sha1sum,
"compute SHA1 message digest",
- "address count"
+ "address count [[*]sum]\n"
+ " - compute SHA1 message digest [save to sum]"
);
+#endif
if (argc < 3)
return 1;
-#if 0
+#ifdef DEBUG
{
- printf("test:");
+ debug("test(%d):", argc);
left = 1;
while (argv[left])
- printf(" %s", argv[left++]);
+ debug(" '%s'", argv[left++]);
}
#endif
#ifdef CONFIG_MENUPROMPT
printf(CONFIG_MENUPROMPT);
#else
- printf("Hit any key to stop autoboot: %2d ", bootdelay);
+ if (bootdelay >= 0)
+ printf("Hit any key to stop autoboot: %2d ", bootdelay);
#endif
#if defined CONFIG_ZERO_BOOTDELAY_CHECK
debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");
- if (bootdelay >= 0 && s && !abortboot (bootdelay)) {
+ if (bootdelay != -1 && s && !abortboot(bootdelay)) {
# ifdef CONFIG_AUTOBOOT_KEYED
int prev = disable_ctrlc(1); /* disable Control C checking */
# endif
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
-apollon arm omap24xx - 2012-09-06 Kyungmin Park <kyungmin.park@samsung.com>
-tb0229 mips mips32 - 2011-12-12
+TQM85xx powerpc MPC85xx - - Stefan Roese <sr@denx.de>
+apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
+tb0229 mips mips32 3f3110d 2011-12-12
rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
OXC powerpc MPC8240 309a292 2011-12-07
BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de>
debug("unexpected busy state\n");
} else {
/*
- * If the R/B pin is not connected, like on the TQM8548,
+ * If the R/B pin is not connected,
* a short delay is necessary.
*/
udelay(1);
fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);
/*
- * Some boards/chips needs this. At least the MPC8360E-RDK and
- * TQM8548 need it. Probably weird chip, because I don't see
- * any need for this on MPC8555E + Samsung K9F1G08U0A. Usually
- * here are 0-2 unexpected busy states per block read.
+ * Some boards/chips needs this. At least the MPC8360E-RDK
+ * needs it. Probably weird chip, because I don't see any
+ * need for this on MPC8555E + Samsung K9F1G08U0A. Usually
+ * here are 0-2 unexpected busy states per block read.
*/
if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN)
fun_wait(fun);
struct ext_filesystem *fs = get_fs();
__u16 crc = 0;
- desc = (struct ext2_block_group *)&fs->gd[i];
+ desc = (struct ext2_block_group *)&fs->bgd[i];
if (fs->sb->feature_ro_compat & EXT4_FEATURE_RO_COMPAT_GDT_CSUM) {
int offset = offsetof(struct ext2_block_group, bg_checksum);
char *zero_buffer = zalloc(fs->blksz);
if (!journal_buffer || !zero_buffer)
goto fail;
- struct ext2_block_group *gd = (struct ext2_block_group *)fs->gdtable;
+ struct ext2_block_group *bgd = (struct ext2_block_group *)fs->gdtable;
if (fs->first_pass_bbmap == 0) {
for (i = 0; i < fs->no_blkgrp; i++) {
- if (gd[i].free_blocks) {
- if (gd[i].bg_flags & EXT4_BG_BLOCK_UNINIT) {
- put_ext4(((uint64_t) (gd[i].block_id *
+ if (bgd[i].free_blocks) {
+ if (bgd[i].bg_flags & EXT4_BG_BLOCK_UNINIT) {
+ put_ext4(((uint64_t) (bgd[i].block_id *
fs->blksz)),
zero_buffer, fs->blksz);
- gd[i].bg_flags =
- gd[i].
+ bgd[i].bg_flags =
+ bgd[i].
bg_flags & ~EXT4_BG_BLOCK_UNINIT;
memcpy(fs->blk_bmaps[i], zero_buffer,
fs->blksz);
fs->curr_blkno = fs->curr_blkno +
(i * fs->blksz * 8);
fs->first_pass_bbmap++;
- gd[i].free_blocks--;
+ bgd[i].free_blocks--;
fs->sb->free_blocks--;
- status = ext4fs_devread(gd[i].block_id *
+ status = ext4fs_devread(bgd[i].block_id *
fs->sect_perblk, 0,
fs->blksz,
journal_buffer);
if (status == 0)
goto fail;
if (ext4fs_log_journal(journal_buffer,
- gd[i].block_id))
+ bgd[i].block_id))
goto fail;
goto success;
} else {
if (bg_idx >= fs->no_blkgrp)
goto fail;
- if (gd[bg_idx].free_blocks == 0) {
+ if (bgd[bg_idx].free_blocks == 0) {
debug("block group %u is full. Skipping\n", bg_idx);
fs->curr_blkno = fs->curr_blkno + blk_per_grp;
fs->curr_blkno--;
goto restart;
}
- if (gd[bg_idx].bg_flags & EXT4_BG_BLOCK_UNINIT) {
+ if (bgd[bg_idx].bg_flags & EXT4_BG_BLOCK_UNINIT) {
memset(zero_buffer, '\0', fs->blksz);
- put_ext4(((uint64_t) (gd[bg_idx].block_id * fs->blksz)),
- zero_buffer, fs->blksz);
+ put_ext4(((uint64_t) (bgd[bg_idx].block_id *
+ fs->blksz)), zero_buffer, fs->blksz);
memcpy(fs->blk_bmaps[bg_idx], zero_buffer, fs->blksz);
- gd[bg_idx].bg_flags = gd[bg_idx].bg_flags &
+ bgd[bg_idx].bg_flags = bgd[bg_idx].bg_flags &
~EXT4_BG_BLOCK_UNINIT;
}
/* journal backup */
if (prev_bg_bitmap_index != bg_idx) {
memset(journal_buffer, '\0', fs->blksz);
- status = ext4fs_devread(gd[bg_idx].block_id
+ status = ext4fs_devread(bgd[bg_idx].block_id
* fs->sect_perblk,
0, fs->blksz, journal_buffer);
if (status == 0)
goto fail;
if (ext4fs_log_journal(journal_buffer,
- gd[bg_idx].block_id))
+ bgd[bg_idx].block_id))
goto fail;
prev_bg_bitmap_index = bg_idx;
}
- gd[bg_idx].free_blocks--;
+ bgd[bg_idx].free_blocks--;
fs->sb->free_blocks--;
goto success;
}
char *zero_buffer = zalloc(fs->blksz);
if (!journal_buffer || !zero_buffer)
goto fail;
- struct ext2_block_group *gd = (struct ext2_block_group *)fs->gdtable;
+ struct ext2_block_group *bgd = (struct ext2_block_group *)fs->gdtable;
if (fs->first_pass_ibmap == 0) {
for (i = 0; i < fs->no_blkgrp; i++) {
- if (gd[i].free_inodes) {
- if (gd[i].bg_itable_unused != gd[i].free_inodes)
- gd[i].bg_itable_unused =
- gd[i].free_inodes;
- if (gd[i].bg_flags & EXT4_BG_INODE_UNINIT) {
+ if (bgd[i].free_inodes) {
+ if (bgd[i].bg_itable_unused !=
+ bgd[i].free_inodes)
+ bgd[i].bg_itable_unused =
+ bgd[i].free_inodes;
+ if (bgd[i].bg_flags & EXT4_BG_INODE_UNINIT) {
put_ext4(((uint64_t)
- (gd[i].inode_id * fs->blksz)),
+ (bgd[i].inode_id *
+ fs->blksz)),
zero_buffer, fs->blksz);
- gd[i].bg_flags = gd[i].bg_flags &
+ bgd[i].bg_flags = bgd[i].bg_flags &
~EXT4_BG_INODE_UNINIT;
memcpy(fs->inode_bmaps[i],
zero_buffer, fs->blksz);
fs->curr_inode_no = fs->curr_inode_no +
(i * inodes_per_grp);
fs->first_pass_ibmap++;
- gd[i].free_inodes--;
- gd[i].bg_itable_unused--;
+ bgd[i].free_inodes--;
+ bgd[i].bg_itable_unused--;
fs->sb->free_inodes--;
- status = ext4fs_devread(gd[i].inode_id *
+ status = ext4fs_devread(bgd[i].inode_id *
fs->sect_perblk, 0,
fs->blksz,
journal_buffer);
if (status == 0)
goto fail;
if (ext4fs_log_journal(journal_buffer,
- gd[i].inode_id))
+ bgd[i].inode_id))
goto fail;
goto success;
} else
fs->curr_inode_no++;
/* get the blockbitmap index respective to blockno */
ibmap_idx = fs->curr_inode_no / inodes_per_grp;
- if (gd[ibmap_idx].bg_flags & EXT4_BG_INODE_UNINIT) {
+ if (bgd[ibmap_idx].bg_flags & EXT4_BG_INODE_UNINIT) {
memset(zero_buffer, '\0', fs->blksz);
- put_ext4(((uint64_t) (gd[ibmap_idx].inode_id *
+ put_ext4(((uint64_t) (bgd[ibmap_idx].inode_id *
fs->blksz)), zero_buffer,
fs->blksz);
- gd[ibmap_idx].bg_flags =
- gd[ibmap_idx].bg_flags & ~EXT4_BG_INODE_UNINIT;
+ bgd[ibmap_idx].bg_flags =
+ bgd[ibmap_idx].bg_flags & ~EXT4_BG_INODE_UNINIT;
memcpy(fs->inode_bmaps[ibmap_idx], zero_buffer,
fs->blksz);
}
/* journal backup */
if (prev_inode_bitmap_index != ibmap_idx) {
memset(journal_buffer, '\0', fs->blksz);
- status = ext4fs_devread(gd[ibmap_idx].inode_id
+ status = ext4fs_devread(bgd[ibmap_idx].inode_id
* fs->sect_perblk,
0, fs->blksz, journal_buffer);
if (status == 0)
goto fail;
if (ext4fs_log_journal(journal_buffer,
- gd[ibmap_idx].inode_id))
+ bgd[ibmap_idx].inode_id))
goto fail;
prev_inode_bitmap_index = ibmap_idx;
}
- if (gd[ibmap_idx].bg_itable_unused != gd[ibmap_idx].free_inodes)
- gd[ibmap_idx].bg_itable_unused =
- gd[ibmap_idx].free_inodes;
- gd[ibmap_idx].free_inodes--;
- gd[ibmap_idx].bg_itable_unused--;
+ if (bgd[ibmap_idx].bg_itable_unused !=
+ bgd[ibmap_idx].free_inodes)
+ bgd[ibmap_idx].bg_itable_unused =
+ bgd[ibmap_idx].free_inodes;
+ bgd[ibmap_idx].free_inodes--;
+ bgd[ibmap_idx].bg_itable_unused--;
fs->sb->free_inodes--;
goto success;
}
/* update block groups */
for (i = 0; i < fs->no_blkgrp; i++) {
- fs->gd[i].bg_checksum = ext4fs_checksum_update(i);
- put_ext4((uint64_t)(fs->gd[i].block_id * fs->blksz),
+ fs->bgd[i].bg_checksum = ext4fs_checksum_update(i);
+ put_ext4((uint64_t)(fs->bgd[i].block_id * fs->blksz),
fs->blk_bmaps[i], fs->blksz);
}
/* update inode table groups */
for (i = 0; i < fs->no_blkgrp; i++) {
- put_ext4((uint64_t) (fs->gd[i].inode_id * fs->blksz),
+ put_ext4((uint64_t) (fs->bgd[i].inode_id * fs->blksz),
fs->inode_bmaps[i], fs->blksz);
}
static void delete_single_indirect_block(struct ext2_inode *inode)
{
- struct ext2_block_group *gd = NULL;
+ struct ext2_block_group *bgd = NULL;
static int prev_bg_bmap_idx = -1;
long int blknr;
int remainder;
return;
}
/* get block group descriptor table */
- gd = (struct ext2_block_group *)fs->gdtable;
+ bgd = (struct ext2_block_group *)fs->gdtable;
/* deleting the single indirect block associated with inode */
if (inode->b.blocks.indir_block != 0) {
bg_idx--;
}
ext4fs_reset_block_bmap(blknr, fs->blk_bmaps[bg_idx], bg_idx);
- gd[bg_idx].free_blocks++;
+ bgd[bg_idx].free_blocks++;
fs->sb->free_blocks++;
/* journal backup */
if (prev_bg_bmap_idx != bg_idx) {
status =
- ext4fs_devread(gd[bg_idx].block_id *
+ ext4fs_devread(bgd[bg_idx].block_id *
fs->sect_perblk, 0, fs->blksz,
journal_buffer);
if (status == 0)
goto fail;
if (ext4fs_log_journal
- (journal_buffer, gd[bg_idx].block_id))
+ (journal_buffer, bgd[bg_idx].block_id))
goto fail;
prev_bg_bmap_idx = bg_idx;
}
unsigned int blk_per_grp = ext4fs_root->sblock.blocks_per_group;
unsigned int *di_buffer = NULL;
unsigned int *DIB_start_addr = NULL;
- struct ext2_block_group *gd = NULL;
+ struct ext2_block_group *bgd = NULL;
struct ext_filesystem *fs = get_fs();
char *journal_buffer = zalloc(fs->blksz);
if (!journal_buffer) {
return;
}
/* get the block group descriptor table */
- gd = (struct ext2_block_group *)fs->gdtable;
+ bgd = (struct ext2_block_group *)fs->gdtable;
if (inode->b.blocks.double_indir_block != 0) {
di_buffer = zalloc(fs->blksz);
ext4fs_reset_block_bmap(*di_buffer,
fs->blk_bmaps[bg_idx], bg_idx);
di_buffer++;
- gd[bg_idx].free_blocks++;
+ bgd[bg_idx].free_blocks++;
fs->sb->free_blocks++;
/* journal backup */
if (prev_bg_bmap_idx != bg_idx) {
- status = ext4fs_devread(gd[bg_idx].block_id
+ status = ext4fs_devread(bgd[bg_idx].block_id
* fs->sect_perblk, 0,
fs->blksz,
journal_buffer);
goto fail;
if (ext4fs_log_journal(journal_buffer,
- gd[bg_idx].block_id))
+ bgd[bg_idx].block_id))
goto fail;
prev_bg_bmap_idx = bg_idx;
}
bg_idx--;
}
ext4fs_reset_block_bmap(blknr, fs->blk_bmaps[bg_idx], bg_idx);
- gd[bg_idx].free_blocks++;
+ bgd[bg_idx].free_blocks++;
fs->sb->free_blocks++;
/* journal backup */
if (prev_bg_bmap_idx != bg_idx) {
memset(journal_buffer, '\0', fs->blksz);
- status = ext4fs_devread(gd[bg_idx].block_id *
+ status = ext4fs_devread(bgd[bg_idx].block_id *
fs->sect_perblk, 0, fs->blksz,
journal_buffer);
if (status == 0)
goto fail;
if (ext4fs_log_journal(journal_buffer,
- gd[bg_idx].block_id))
+ bgd[bg_idx].block_id))
goto fail;
prev_bg_bmap_idx = bg_idx;
}
unsigned int *tib_start_addr = NULL;
unsigned int *tip_buffer = NULL;
unsigned int *tipb_start_addr = NULL;
- struct ext2_block_group *gd = NULL;
+ struct ext2_block_group *bgd = NULL;
struct ext_filesystem *fs = get_fs();
char *journal_buffer = zalloc(fs->blksz);
if (!journal_buffer) {
return;
}
/* get block group descriptor table */
- gd = (struct ext2_block_group *)fs->gdtable;
+ bgd = (struct ext2_block_group *)fs->gdtable;
if (inode->b.blocks.triple_indir_block != 0) {
tigp_buffer = zalloc(fs->blksz);
bg_idx);
tip_buffer++;
- gd[bg_idx].free_blocks++;
+ bgd[bg_idx].free_blocks++;
fs->sb->free_blocks++;
/* journal backup */
if (prev_bg_bmap_idx != bg_idx) {
status =
- ext4fs_devread(gd[bg_idx].block_id *
- fs->sect_perblk, 0,
- fs->blksz,
- journal_buffer);
+ ext4fs_devread(
+ bgd[bg_idx].block_id *
+ fs->sect_perblk, 0,
+ fs->blksz,
+ journal_buffer);
if (status == 0)
goto fail;
if (ext4fs_log_journal(journal_buffer,
- gd[bg_idx].
+ bgd[bg_idx].
block_id))
goto fail;
prev_bg_bmap_idx = bg_idx;
fs->blk_bmaps[bg_idx], bg_idx);
tigp_buffer++;
- gd[bg_idx].free_blocks++;
+ bgd[bg_idx].free_blocks++;
fs->sb->free_blocks++;
/* journal backup */
if (prev_bg_bmap_idx != bg_idx) {
memset(journal_buffer, '\0', fs->blksz);
status =
- ext4fs_devread(gd[bg_idx].block_id *
+ ext4fs_devread(bgd[bg_idx].block_id *
fs->sect_perblk, 0,
fs->blksz, journal_buffer);
if (status == 0)
goto fail;
if (ext4fs_log_journal(journal_buffer,
- gd[bg_idx].block_id))
+ bgd[bg_idx].block_id))
goto fail;
prev_bg_bmap_idx = bg_idx;
}
bg_idx--;
}
ext4fs_reset_block_bmap(blknr, fs->blk_bmaps[bg_idx], bg_idx);
- gd[bg_idx].free_blocks++;
+ bgd[bg_idx].free_blocks++;
fs->sb->free_blocks++;
/* journal backup */
if (prev_bg_bmap_idx != bg_idx) {
memset(journal_buffer, '\0', fs->blksz);
- status = ext4fs_devread(gd[bg_idx].block_id *
+ status = ext4fs_devread(bgd[bg_idx].block_id *
fs->sect_perblk, 0, fs->blksz,
journal_buffer);
if (status == 0)
goto fail;
if (ext4fs_log_journal(journal_buffer,
- gd[bg_idx].block_id))
+ bgd[bg_idx].block_id))
goto fail;
prev_bg_bmap_idx = bg_idx;
}
unsigned int blk_per_grp = ext4fs_root->sblock.blocks_per_group;
unsigned int inode_per_grp = ext4fs_root->sblock.inodes_per_group;
struct ext2_inode *inode_buffer = NULL;
- struct ext2_block_group *gd = NULL;
+ struct ext2_block_group *bgd = NULL;
struct ext_filesystem *fs = get_fs();
char *journal_buffer = zalloc(fs->blksz);
if (!journal_buffer)
return -ENOMEM;
/* get the block group descriptor table */
- gd = (struct ext2_block_group *)fs->gdtable;
+ bgd = (struct ext2_block_group *)fs->gdtable;
status = ext4fs_read_inode(ext4fs_root, inodeno, &inode);
if (status == 0)
goto fail;
debug("EXT4_EXTENTS Block releasing %ld: %d\n",
blknr, bg_idx);
- gd[bg_idx].free_blocks++;
+ bgd[bg_idx].free_blocks++;
fs->sb->free_blocks++;
/* journal backup */
if (prev_bg_bmap_idx != bg_idx) {
status =
- ext4fs_devread(gd[bg_idx].block_id *
+ ext4fs_devread(bgd[bg_idx].block_id *
fs->sect_perblk, 0,
fs->blksz, journal_buffer);
if (status == 0)
goto fail;
if (ext4fs_log_journal(journal_buffer,
- gd[bg_idx].block_id))
+ bgd[bg_idx].block_id))
goto fail;
prev_bg_bmap_idx = bg_idx;
}
bg_idx);
debug("ActualB releasing %ld: %d\n", blknr, bg_idx);
- gd[bg_idx].free_blocks++;
+ bgd[bg_idx].free_blocks++;
fs->sb->free_blocks++;
/* journal backup */
if (prev_bg_bmap_idx != bg_idx) {
memset(journal_buffer, '\0', fs->blksz);
- status = ext4fs_devread(gd[bg_idx].block_id
+ status = ext4fs_devread(bgd[bg_idx].block_id
* fs->sect_perblk,
0, fs->blksz,
journal_buffer);
if (status == 0)
goto fail;
if (ext4fs_log_journal(journal_buffer,
- gd[bg_idx].block_id))
+ bgd[bg_idx].block_id))
goto fail;
prev_bg_bmap_idx = bg_idx;
}
/* get the block no */
inodeno--;
- blkno = __le32_to_cpu(gd[ibmap_idx].inode_table_id) +
+ blkno = __le32_to_cpu(bgd[ibmap_idx].inode_table_id) +
(inodeno % __le32_to_cpu(inode_per_grp)) / inodes_per_block;
/* get the offset of the inode */
/* update the respective inode bitmaps */
inodeno++;
ext4fs_reset_inode_bmap(inodeno, fs->inode_bmaps[ibmap_idx], ibmap_idx);
- gd[ibmap_idx].free_inodes++;
+ bgd[ibmap_idx].free_inodes++;
fs->sb->free_inodes++;
/* journal backup */
memset(journal_buffer, '\0', fs->blksz);
- status = ext4fs_devread(gd[ibmap_idx].inode_id *
+ status = ext4fs_devread(bgd[ibmap_idx].inode_id *
fs->sect_perblk, 0, fs->blksz, journal_buffer);
if (status == 0)
goto fail;
- if (ext4fs_log_journal(journal_buffer, gd[ibmap_idx].inode_id))
+ if (ext4fs_log_journal(journal_buffer, bgd[ibmap_idx].inode_id))
goto fail;
ext4fs_update();
printf("Error in getting the block group descriptor table\n");
goto fail;
}
- fs->gd = (struct ext2_block_group *)fs->gdtable;
+ fs->bgd = (struct ext2_block_group *)fs->gdtable;
/* load all the available bitmap block of the partition */
fs->blk_bmaps = zalloc(fs->no_blkgrp * sizeof(char *));
for (i = 0; i < fs->no_blkgrp; i++) {
status =
- ext4fs_devread(fs->gd[i].block_id * fs->sect_perblk, 0,
+ ext4fs_devread(fs->bgd[i].block_id * fs->sect_perblk, 0,
fs->blksz, (char *)fs->blk_bmaps[i]);
if (status == 0)
goto fail;
}
for (i = 0; i < fs->no_blkgrp; i++) {
- status = ext4fs_devread(fs->gd[i].inode_id * fs->sect_perblk,
+ status = ext4fs_devread(fs->bgd[i].inode_id * fs->sect_perblk,
0, fs->blksz,
(char *)fs->inode_bmaps[i]);
if (status == 0)
* reboot of a linux kernel
*/
for (i = 0; i < fs->no_blkgrp; i++)
- real_free_blocks = real_free_blocks + fs->gd[i].free_blocks;
+ real_free_blocks = real_free_blocks + fs->bgd[i].free_blocks;
if (real_free_blocks != fs->sb->free_blocks)
fs->sb->free_blocks = real_free_blocks;
free(fs->gdtable);
fs->gdtable = NULL;
- fs->gd = NULL;
+ fs->bgd = NULL;
/*
* reinitiliazed the global inode and
* block bitmap first execution check variables
goto fail;
ibmap_idx = inodeno / ext4fs_root->sblock.inodes_per_group;
inodeno--;
- itable_blkno = __le32_to_cpu(fs->gd[ibmap_idx].inode_table_id) +
+ itable_blkno = __le32_to_cpu(fs->bgd[ibmap_idx].inode_table_id) +
(inodeno % __le32_to_cpu(sblock->inodes_per_group)) /
inodes_per_block;
blkoff = (inodeno % inodes_per_block) * fs->inodesz;
}
ibmap_idx = parent_inodeno / ext4fs_root->sblock.inodes_per_group;
parent_inodeno--;
- parent_itable_blkno = __le32_to_cpu(fs->gd[ibmap_idx].inode_table_id) +
+ parent_itable_blkno = __le32_to_cpu(fs->bgd[ibmap_idx].inode_table_id) +
(parent_inodeno %
__le32_to_cpu(sblock->inodes_per_group)) / inodes_per_block;
blkoff = (parent_inodeno % inodes_per_block) * fs->inodesz;
+++ /dev/null
-/*
- * (C) Copyright 2007
- * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de.
- *
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Wolfgang Denk <wd@denx.de>
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2002,2003 Motorola,Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * TQM85xx (8560/40/55/41/48) board configuration file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* High Level Configuration Options */
-#define CONFIG_BOOKE 1 /* BOOKE */
-#define CONFIG_E500 1 /* BOOKE e500 family */
-#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41 */
-
-#if defined(CONFIG_TQM8548_BE)
-#define CONFIG_SYS_TEXT_BASE 0xfff80000
-#else
-#define CONFIG_SYS_TEXT_BASE 0xfffc0000
-#endif
-
-#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE)
-#define CONFIG_TQM8548
-#endif
-
-#define CONFIG_PCI
-#ifndef CONFIG_TQM8548_AG
-#define CONFIG_PCI1 /* PCI/PCI-X controller */
-#endif
-#ifdef CONFIG_TQM8548
-#define CONFIG_PCIE1 /* PCI Express interface */
-#endif
-
-#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
-#define CONFIG_PCIX_CHECK /* PCIX olny works at 66 MHz */
-#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
-
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
-
-#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
-
- /*
- * Configuration for big NOR Flashes
- *
- * Define CONFIG_TQM_BIGFLASH for boards with more than 128 MiB NOR Flash.
- * Please be aware, that this changes the whole memory map (new CCSRBAR
- * address, etc). You have to use an adapted Linux kernel or FDT blob
- * if this option is set.
- */
-#undef CONFIG_TQM_BIGFLASH
-
-/*
- * NAND flash support (disabled by default)
- *
- * Warning: NAND support will likely increase the U-Boot image size
- * to more than 256 KB. Please adjust CONFIG_SYS_TEXT_BASE if necessary.
- */
-#ifdef CONFIG_TQM8548_BE
-#define CONFIG_NAND
-#endif
-
-/*
- * MPC8540 and MPC8548 don't have CPM module
- */
-#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8548)
-#define CONFIG_CPM2 1 /* has CPM2 */
-#endif
-
-#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
-
-#if defined(CONFIG_TQM8548_AG) || defined(CONFIG_TQM8548_BE)
-#define CONFIG_CAN_DRIVER /* CAN Driver support */
-#endif
-
-/*
- * sysclk for MPC85xx
- *
- * Two valid values are:
- * 33333333
- * 66666666
- *
- * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
- * is likely the desired value here, so that is now the default.
- * The board, however, can run at 66MHz. In any event, this value
- * must match the settings of some switches. Details can be found
- * in the README.mpc85xxads.
- */
-
-#ifndef CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_CLK_FREQ 33333333
-#endif
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE /* toggle L2 cache */
-#define CONFIG_BTB /* toggle branch predition */
-
-#define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */
-
-#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
-#define CONFIG_SYS_MEMTEST_START 0x00000000
-#define CONFIG_SYS_MEMTEST_END 0x10000000
-
-#ifdef CONFIG_TQM_BIGFLASH
-#define CONFIG_SYS_CCSRBAR 0xA0000000
-#else
-#define CONFIG_SYS_CCSRBAR 0xE0000000
-#endif
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
-
-#if defined(CONFIG_TQM_BIGFLASH) || \
- (!defined(CONFIG_TQM8548_AG) && !defined(CONFIG_TQM8548_BE))
-#define CONFIG_SYS_PPC_DDR_WIMGE (MAS2_I | MAS2_G)
-#define CONFIG_SYS_DDR_EARLY_SIZE_MB (512)
-#else
-#define CONFIG_SYS_PPC_DDR_WIMGE (0)
-#define CONFIG_SYS_DDR_EARLY_SIZE_MB (2 * 1024)
-#endif
-
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-#ifdef CONFIG_TQM8548_AG
-#define CONFIG_VERY_BIG_RAM
-#endif
-
-#define CONFIG_NUM_DDR_CONTROLLERS 1
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL 2
-
-#if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560)
-/* TQM8540 & 8560 need DLL-override */
-#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */
-#define CONFIG_DDR_DEFAULT_CL 25 /* CAS latency 2,5 */
-#endif /* CONFIG_TQM8540 || CONFIG_TQM8560 */
-
-#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) || \
- defined(CONFIG_TQM8548)
-#define CONFIG_DDR_DEFAULT_CL 30 /* CAS latency 3 */
-#endif /* CONFIG_TQM8541 || CONFIG_TQM8555 || CONFIG_TQM8548 */
-
-/*
- * Flash on the Local Bus
- */
-#ifdef CONFIG_TQM_BIGFLASH
-#define CONFIG_SYS_FLASH0 0xE0000000
-#define CONFIG_SYS_FLASH1 0xC0000000
-#else /* !CONFIG_TQM_BIGFLASH */
-#define CONFIG_SYS_FLASH0 0xFC000000
-#define CONFIG_SYS_FLASH1 0xF8000000
-#endif /* CONFIG_TQM_BIGFLASH */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 }
-
-#define CONFIG_SYS_LBC_FLASH_BASE CONFIG_SYS_FLASH1 /* Localbus flash start */
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_LBC_FLASH_BASE /* start of FLASH */
-
-/* Default ORx timings are for <= 41.7 MHz Local Bus Clock.
- *
- * Note: According to timing specifications external addr latch delay
- * (EAD, bit #0) must be set if Local Bus Clock is > 83 MHz.
- *
- * For other Local Bus Clocks see following table:
- *
- * Clock/MHz CONFIG_SYS_ORx_PRELIM
- * 166 0x.....CA5
- * 133 0x.....C85
- * 100 0x.....C65
- * 83 0x.....FA2
- * 66 0x.....C82
- * 50 0x.....C60
- * 42 0x.....040
- * 33 0x.....030
- * 25 0x.....020
- *
- */
-#ifdef CONFIG_TQM_BIGFLASH
-#define CONFIG_SYS_BR0_PRELIM 0xE0001801 /* port size 32bit */
-#define CONFIG_SYS_OR0_PRELIM 0xE0000040 /* 512MB Flash */
-#define CONFIG_SYS_BR1_PRELIM 0xC0001801 /* port size 32bit */
-#define CONFIG_SYS_OR1_PRELIM 0xE0000040 /* 512MB Flash */
-#else /* !CONFIG_TQM_BIGFLASH */
-#define CONFIG_SYS_BR0_PRELIM 0xfc001801 /* port size 32bit */
-#define CONFIG_SYS_OR0_PRELIM 0xfc000040 /* 64MB Flash */
-#define CONFIG_SYS_BR1_PRELIM 0xf8001801 /* port size 32bit */
-#define CONFIG_SYS_OR1_PRELIM 0xfc000040 /* 64MB Flash */
-#endif /* CONFIG_TQM_BIGFLASH */
-
-#define CONFIG_SYS_FLASH_CFI /* flash is CFI compat. */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector */
-#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* speed up output to Flash */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-
-/*
- * Note: when changing the Local Bus clock divider you have to
- * change the timing values in CONFIG_SYS_ORx_PRELIM.
- *
- * LCRR[00:03] CLKDIV: System (CCB) clock divider. Valid values are 2, 4, 8.
- * LCRR[16:17] EADC : External address delay cycles. It should be set to 2
- * for Local Bus Clock > 83.3 MHz.
- */
-#define CONFIG_SYS_LBC_LCRR 0x00030008 /* LB clock ratio reg */
-#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
-#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
-#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/
-
-#define CONFIG_SYS_INIT_RAM_LOCK 1
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_CCSRBAR \
- + 0x04010000) /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN (~CONFIG_SYS_TEXT_BASE + 1)/* Reserved for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (384 * 1024) /* Reserved for malloc */
-
-/* Serial Port */
-#if defined(CONFIG_TQM8560)
-
-#define CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else */
-#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
-
-#else /* !CONFIG_TQM8560 */
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
-
-/* PS/2 Keyboard */
-#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */
-#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */
-#define CONFIG_PS2SERIAL 2 /* .. on DUART2 */
-#define CONFIG_PS2MULT_DELAY (CONFIG_SYS_HZ/2) /* Initial delay */
-#define CONFIG_BOARD_EARLY_INIT_R 1
-
-#endif /* CONFIG_TQM8560 */
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
-#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
-#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP 1
-#define CONFIG_OF_STDOUT_VIA_ALIAS 1
-
-/* CAN */
-#define CONFIG_SYS_CAN_BASE (CONFIG_SYS_CCSRBAR \
- + 0x03000000) /* CAN base address */
-#ifdef CONFIG_CAN_DRIVER
-#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 KiB address mask */
-#define CONFIG_SYS_OR2_CAN (CONFIG_SYS_CAN_OR_AM | OR_UPM_BI)
-#define CONFIG_SYS_BR2_CAN ((CONFIG_SYS_CAN_BASE & BR_BA) | \
- BR_PS_8 | BR_MS_UPMC | BR_V)
-#endif /* CONFIG_CAN_DRIVER */
-
-/*
- * I2C
- */
-#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-#define CONFIG_SYS_I2C_NOPROBES {0x48} /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET 0x3000
-
-/* I2C RTC */
-#define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
-
-/* I2C EEPROM */
-/*
- * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work also).
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* more than one eeprom */
-
-/* I2C SYSMON (LM75) */
-#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
-#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
-#define CONFIG_SYS_DTT_MAX_TEMP 70
-#define CONFIG_SYS_DTT_LOW_TEMP -30
-#define CONFIG_SYS_DTT_HYSTERESIS 3
-
-#ifndef CONFIG_PCIE1
-/* RapidIO MMU */
-#ifdef CONFIG_TQM_BIGFLASH
-#define CONFIG_SYS_RIO_MEM_BASE 0xb0000000 /* base address */
-#define CONFIG_SYS_RIO_MEM_SIZE 0x10000000 /* 256M */
-#else /* !CONFIG_TQM_BIGFLASH */
-#define CONFIG_SYS_RIO_MEM_BASE 0xc0000000 /* base address */
-#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 512M */
-#endif /* CONFIG_TQM_BIGFLASH */
-#define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE
-#endif /* CONFIG_PCIE1 */
-
-/* NAND FLASH */
-#ifdef CONFIG_NAND
-
-#define CONFIG_NAND_FSL_UPM 1
-
-#define CONFIG_MTD_NAND_ECC_JFFS2 1 /* use JFFS2 ECC */
-
-/* address distance between chip selects */
-#define CONFIG_SYS_NAND_SELECT_DEVICE 1
-#define CONFIG_SYS_NAND_CS_DIST 0x200
-
-#define CONFIG_SYS_NAND_SIZE 0x8000
-#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_CCSRBAR + 0x03010000)
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define CONFIG_SYS_NAND_MAX_CHIPS 2 /* Number of chips per device */
-
-/* CS3 for NAND Flash */
-#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_NAND_BASE & BR_BA) | \
- BR_PS_8 | BR_MS_UPMB | BR_V)
-#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(CONFIG_SYS_NAND_SIZE) | OR_UPM_BI)
-
-#define NAND_BIG_DELAY_US 25 /* max tR for Samsung devices */
-
-#endif /* CONFIG_NAND */
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS
-#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCI1_IO_BUS (CONFIG_SYS_CCSRBAR + 0x02000000)
-#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BUS
-#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */
-
-#ifdef CONFIG_PCIE1
-/*
- * General PCI express
- * Addresses are mapped 1-1.
- */
-#ifdef CONFIG_TQM_BIGFLASH
-#define CONFIG_SYS_PCIE1_MEM_BUS 0xb0000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 512M */
-#define CONFIG_SYS_PCIE1_IO_BUS 0xaf000000
-#else /* !CONFIG_TQM_BIGFLASH */
-#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCIE1_IO_BUS 0xef000000
-#endif /* CONFIG_TQM_BIGFLASH */
-#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
-#define CONFIG_SYS_PCIE1_IO_PHYS CONFIG_SYS_PCIE1_IO_BUS
-#define CONFIG_SYS_PCIE1_IO_SIZE 0x1000000 /* 16M */
-#endif /* CONFIG_PCIE1 */
-
-#if defined(CONFIG_PCI)
-
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-
-#define CONFIG_EEPRO100
-#undef CONFIG_TULIP
-
-#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
-
-#endif /* CONFIG_PCI */
-
-
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_TSEC1 1
-#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "TSEC1"
-#define TSEC1_PHY_ADDR 2
-#define TSEC2_PHY_ADDR 1
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
-#define TSEC1_FLAGS TSEC_GIGABIT
-#define TSEC2_FLAGS TSEC_GIGABIT
-#define FEC_PHY_ADDR 3
-#define FEC_PHYIDX 0
-#define FEC_FLAGS 0
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-
-#ifdef CONFIG_TQM8548
-/*
- * TQM8548 has 4 ethernet ports. 4 ETSEC's.
- *
- * On the STK85xx Starterkit the ETSEC3/4 ports are on an
- * additional adapter (AIO) between module and Starterkit.
- */
-#define CONFIG_TSEC3 1
-#define CONFIG_TSEC3_NAME "TSEC2"
-#define CONFIG_TSEC4 1
-#define CONFIG_TSEC4_NAME "TSEC3"
-#define TSEC3_PHY_ADDR 4
-#define TSEC4_PHY_ADDR 5
-#define TSEC3_PHYIDX 0
-#define TSEC4_PHYIDX 0
-#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define CONFIG_HAS_ETH3
-#define CONFIG_HAS_ETH4
-#endif /* CONFIG_TQM8548 */
-
-/* Options are TSEC[0-1], FEC */
-#define CONFIG_ETHPRIME "TSEC0"
-
-#if defined(CONFIG_TQM8540)
-/*
- * TQM8540 has 3 ethernet ports. 2 TSEC's and one FEC.
- * The FEC port is connected on the same signals as the FCC3 port
- * of the TQM8560 to the baseboard (STK85xx Starterkit).
- *
- * On the STK85xx Starterkit the X47/X50 jumper has to be set to
- * a - d (X50.2 - 3) to enable the FEC port.
- */
-#define CONFIG_MPC85XX_FEC 1
-#define CONFIG_MPC85XX_FEC_NAME "FEC"
-#endif
-
-#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555)
-/*
- * TQM8541/55 have 4 ethernet ports. 2 TSEC's and 2 FCC's. Only one FCC port
- * can be used at once, since only one FCC port is available on the STK85xx
- * Starterkit.
- *
- * To use this port you have to configure U-Boot to use the FCC port 1...2
- * and set the X47/X50 jumper to:
- * FCC1: a - b (X47.2 - X50.2)
- * FCC2: a - c (X50.2 - 1)
- */
-#define CONFIG_ETHER_ON_FCC
-#define CONFIG_ETHER_INDEX 1 /* FCC channel for ethernet */
-#endif
-
-#if defined(CONFIG_TQM8560)
-/*
- * TQM8560 has 5 ethernet ports. 2 TSEC's and 3 FCC's. Only one FCC port
- * can be used at once, since only one FCC port is available on the STK85xx
- * Starterkit.
- *
- * To use this port you have to configure U-Boot to use the FCC port 1...3
- * and set the X47/X50 jumper to:
- * FCC1: a - b (X47.2 - X50.2)
- * FCC2: a - c (X50.2 - 1)
- * FCC3: a - d (X50.2 - 3)
- */
-#define CONFIG_ETHER_ON_FCC
-#define CONFIG_ETHER_INDEX 3 /* FCC channel for ethernet */
-#endif
-
-#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1)
-#define CONFIG_ETHER_ON_FCC1
-#define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | \
- CMXFCR_TF1CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12)
-#define CONFIG_SYS_CPMFCR_RAMTYPE 0
-#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
-#endif
-
-#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
-#define CONFIG_ETHER_ON_FCC2
-#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | \
- CMXFCR_TF2CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK16 | CMXFCR_TF2CS_CLK13)
-#define CONFIG_SYS_CPMFCR_RAMTYPE 0
-#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
-#endif
-
-#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
-#define CONFIG_ETHER_ON_FCC3
-#define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | \
- CMXFCR_TF3CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14)
-#define CONFIG_SYS_CPMFCR_RAMTYPE 0
-#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
-#endif
-
-/*
- * Environment
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K (one sector) for env */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-#define CONFIG_TIMESTAMP /* Print image info with ts */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-#ifdef CONFIG_NAND
-/*
- * Use NAND-FLash as JFFS2 device
- */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_JFFS2
-
-#define CONFIG_JFFS2_NAND 1
-
-#ifdef CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nand0=TQM85xx-nand"
-#define MTDPARTS_DEFAULT "mtdparts=TQM85xx-nand:-"
-#else
-#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */
-#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_SIZE 0x200000 /* size of jffs2 partition */
-#endif /* CONFIG_CMD_MTDPARTS */
-
-#endif /* CONFIG_NAND */
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-#ifndef CONFIG_TQM8548_AG
-#define CONFIG_CMD_DATE
-#endif
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-#define CONFIG_CMD_PCI
-#endif
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buf Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port*/
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-#define CONFIG_LOADADDR 200000 /* default addr for tftp & bootm*/
-
-#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-
-
-/*
- * Setup some board specific values for the default environment variables
- */
-#ifdef CONFIG_CPM2
-#define CONFIG_ENV_CONSDEV "consdev=ttyCPM0\0"
-#else
-#define CONFIG_ENV_CONSDEV "consdev=ttyS0\0"
-#endif
-#define CONFIG_ENV_FDT_FILE "fdt_file="MK_STR(CONFIG_HOSTNAME)"/" \
- MK_STR(CONFIG_HOSTNAME)".dtb\0"
-#define CONFIG_ENV_BOOTFILE "bootfile="MK_STR(CONFIG_HOSTNAME)"/uImage\0"
-#define CONFIG_ENV_UBOOT "uboot="MK_STR(CONFIG_HOSTNAME)"/u-boot.bin\0" \
- "uboot_addr="MK_STR(CONFIG_SYS_TEXT_BASE)"\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_ENV_BOOTFILE \
- CONFIG_ENV_FDT_FILE \
- CONFIG_ENV_CONSDEV \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask" \
- ":$hostname:$netdev:off panic=1\0" \
- "addcons=setenv bootargs $bootargs " \
- "console=$consdev,$baudrate\0" \
- "flash_nfs=run nfsargs addip addcons;" \
- "bootm $kernel_addr - $fdt_addr\0" \
- "flash_self=run ramargs addip addcons;" \
- "bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \
- "net_nfs=tftp $kernel_addr_r $bootfile;" \
- "tftp $fdt_addr_r $fdt_file;" \
- "run nfsargs addip addcons;" \
- "bootm $kernel_addr_r - $fdt_addr_r\0" \
- "rootpath=/opt/eldk/ppc_85xx\0" \
- "fdt_addr_r=900000\0" \
- "kernel_addr_r=1000000\0" \
- "fdt_addr=ffec0000\0" \
- "kernel_addr=ffd00000\0" \
- "ramdisk_addr=ff800000\0" \
- CONFIG_ENV_UBOOT \
- "load=tftp 100000 $uboot\0" \
- "update=protect off $uboot_addr +$filesize;" \
- "erase $uboot_addr +$filesize;" \
- "cp.b 100000 $uboot_addr $filesize" \
- "upd=run load update\0" \
- ""
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-#endif /* __CONFIG_H */
* (C) Copyright 2003-2007
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Based on PRO Motion board config file by Andy Joseph, andy@promessdev.com
+ * Based on Motion-PRO board config file by Robert McCullough, rob@promessinc.com
*
* See file CREDITS for list of people who contributed to this
* project.
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_ETHADDR 00:50:C2:40:10:00
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=motionpro\0" \
- "netmask=255.255.0.0\0" \
- "ipaddr=192.168.160.22\0" \
- "serverip=192.168.1.1\0" \
- "gatewayip=192.168.1.1\0" \
+ "netmask=255.255.255.0\0" \
+ "ipaddr=192.168.1.106\0" \
+ "serverip=192.168.1.100\0" \
+ "gatewayip=192.168.1.100\0" \
"console=ttyPSC0,115200\0" \
"u-boot_addr=400000\0" \
"kernel_addr=400000\0" \
"fdt_addr=700000\0" \
"ramdisk_addr=800000\0" \
"multi_image_addr=800000\0" \
- "rootpath=/opt/eldk/ppc_6xx\0" \
- "u-boot=motionpro/u-boot.bin\0" \
- "bootfile=motionpro/uImage\0" \
- "fdt_file=motionpro/motionpro.dtb\0" \
- "ramdisk_file=motionpro/uRamdisk\0" \
+ "rootpath=/opt/eldk-4.2/ppc_6xx\0" \
+ "u-boot=/tftpboot/motionpro/u-boot.bin\0" \
+ "bootfile=/tftpboot/motionpro/uImage\0" \
+ "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \
+ "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \
"multi_image_file=kernel+initrd+dtb.img\0" \
"load=tftp ${u-boot_addr} ${u-boot}\0" \
"update=prot off fff00000 +${filesize};" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
- "fat_args=setenv bootargs rw\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "fat_args=setenv bootargs root=/dev/sda rw\0" \
+ "mtdids=nor0=ff000000.flash\0" \
+ "mtdparts=ff000000.flash:13m(fs),2m(kernel),384k(uboot)," \
+ "128k(env),128k(redund_env)," \
+ "128k(dtb),128k(user_data)\0" \
+ "addcons=setenv bootargs ${bootargs} console=${console}\0" \
+ "addmtd=setenv bootargs ${bootargs} mtdparts=${mtdparts}\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
"${netmask}:${hostname}:${netdev}:off panic=1 " \
"console=${console}\0" \
"net_nfs=tftp ${kernel_addr} ${bootfile}; " \
- "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip; " \
+ "tftp ${fdt_addr} ${fdt_file}; " \
+ "run nfsargs addip addmtd; " \
"bootm ${kernel_addr} - ${fdt_addr}\0" \
"net_self=tftp ${kernel_addr} ${bootfile}; " \
"tftp ${fdt_addr} ${fdt_file}; " \
"tftp ${ramdisk_addr} ${ramdisk_file}; " \
- "run ramargs addip; " \
+ "nfs ${ramdisk_addr} ${serverip}:${rootpath}/images/uRamdisk; " \
+ "run ramargs addip addcons addmtd; " \
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
- "fat_multi=run fat_args addip; fatload ide 0:1 " \
+ "fat_multi=run fat_args addip addmtd; fatload ide 0:1 " \
"${multi_image_addr} ${multi_image_file}; " \
"bootm ${multi_image_addr}\0" \
""
-#define CONFIG_BOOTCOMMAND "run net_nfs"
+#define CONFIG_BOOTCOMMAND "run fat_multi"
/*
* do board-specific init
#define CONFIG_SYS_RAMBOOT 1
#endif
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* 1 MiB for malloc() */
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
#define CONFIG_FLASH_CFI_MTD
#define MTDIDS_DEFAULT "nor0=motionpro-0"
#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \
- "13m(fs),2m(kernel),256k(uboot)," \
+ "13m(fs),2m(kernel),384k(uboot)," \
"128k(env),128k(redund_env)," \
"128k(dtb),-(user_data)"
/* Superblock */
struct ext2_sblock *sb;
/* Block group descritpor table */
- struct ext2_block_group *gd;
+ struct ext2_block_group *bgd;
char *gdtable;
/* Block Bitmap Related */
#ifdef CONFIG_NETCONSOLE
nc_input_packet((uchar *)ip + IP_UDP_HDR_SIZE,
- ntohl(ip->ip_src),
+ src_ip,
ntohs(ip->udp_dst),
ntohs(ip->udp_src),
ntohs(ip->udp_len) - UDP_HDR_SIZE);
projects / karo-tx-uboot.git / commitdiff