E: guillaume.alexandre@gespac.ch
D: Add PCIPPC6 configuration
-N: Swen Anderson
-E: sand@peppercon.de
-D: ERIC Support
-
N: Pantelis Antoniou
E: panto@intracom.gr
D: NETVIA & NETPHONE board support, ARTOS support.
E: thomas@corelatus.se
D: Support for GTH, GTH2 and dbau1x00 boards; lots of PCMCIA fixes
-N: Marc Leeman
-E: marc.leeman@barco.com
-D: Support for Barco Streaming Video Card (SVC) and Sample Compress Network (SCN)
-W: www.barco.com
-
N: The LEOX team
E: team@leox.org
D: Support for LEOX boards, DS164x RTC
bluestone APM821XX
-Reinhard Meyer <r.meyer@emk-elektronik.de>
+Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
TOP860 MPC860T
TOP5200 MPC5200
+ TOP9000 ARM926EJS (AT91SAM9xxx SoC)
Tolunay Orkun <torkun@nextio.com>
RPXClassic MPC8xx
RPXlite MPC8xx
- ERIC PPC4xx
-
MOUSSE MPC824x
RPXsuper MPC8260
a320evb FA526 (ARM920T-like) (a320 SoC)
+Eric Cooper <ecc@cmu.edu>
+
+ dockstar ARM926EJS (Kirkwood SoC)
+
George G. Davis <gdavis@mvista.com>
assabet SA1100
}
boards_by_arch() { boards_by_field 2 "$@" ; }
boards_by_cpu() { boards_by_field 3 "$@" ; }
+boards_by_soc() { boards_by_field 6 "$@" ; }
#########################################################################
## MPC5xx Systems
## AT91 Systems
#########################################################################
-LIST_at91=" \
- afeb9260 \
- at91cap9adk \
- at91rm9200dk \
- at91rm9200ek \
+LIST_at91="$(boards_by_soc at91)\
+ $(boards_by_soc at91rm9200)\
at91sam9260ek \
at91sam9261ek \
at91sam9263ek \
at91sam9g20ek \
at91sam9m10g45ek \
at91sam9rlek \
- cmc_pu2 \
CPUAT91 \
CPU9260 \
CPU9G20 \
- csb637 \
- eb_cpux9k2 \
- kb9202 \
- meesc \
- mp2usb \
- m501sk \
- otc570 \
- pm9261 \
- pm9263 \
pm9g45 \
SBC35_A9G20 \
TNY_A9260 \
VERSION = 2010
PATCHLEVEL = 12
SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
OBJS := $(addprefix $(obj),$(OBJS))
-LIBS = lib/libgeneric.a
-LIBS += lib/lzma/liblzma.a
-LIBS += lib/lzo/liblzo.a
+LIBS = lib/libgeneric.o
+LIBS += lib/lzma/liblzma.o
+LIBS += lib/lzo/liblzo.o
LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
- "board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
-LIBS += $(CPUDIR)/lib$(CPU).a
+ "board/$(VENDOR)/common/lib$(VENDOR).o"; fi)
+LIBS += $(CPUDIR)/lib$(CPU).o
ifdef SOC
-LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).a
+LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).o
endif
ifeq ($(CPU),ixp)
-LIBS += arch/arm/cpu/ixp/npe/libnpe.a
+LIBS += arch/arm/cpu/ixp/npe/libnpe.o
endif
-LIBS += arch/$(ARCH)/lib/lib$(ARCH).a
-LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
- fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
- fs/ubifs/libubifs.a
-LIBS += net/libnet.a
-LIBS += disk/libdisk.a
-LIBS += drivers/bios_emulator/libatibiosemu.a
-LIBS += drivers/block/libblock.a
-LIBS += drivers/dma/libdma.a
-LIBS += drivers/fpga/libfpga.a
-LIBS += drivers/gpio/libgpio.a
-LIBS += drivers/hwmon/libhwmon.a
-LIBS += drivers/i2c/libi2c.a
-LIBS += drivers/input/libinput.a
-LIBS += drivers/misc/libmisc.a
-LIBS += drivers/mmc/libmmc.a
-LIBS += drivers/mtd/libmtd.a
-LIBS += drivers/mtd/nand/libnand.a
-LIBS += drivers/mtd/onenand/libonenand.a
-LIBS += drivers/mtd/ubi/libubi.a
-LIBS += drivers/mtd/spi/libspi_flash.a
-LIBS += drivers/net/libnet.a
-LIBS += drivers/net/phy/libphy.a
-LIBS += drivers/pci/libpci.a
-LIBS += drivers/pcmcia/libpcmcia.a
-LIBS += drivers/power/libpower.a
-LIBS += drivers/spi/libspi.a
+LIBS += arch/$(ARCH)/lib/lib$(ARCH).o
+LIBS += fs/cramfs/libcramfs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o \
+ fs/reiserfs/libreiserfs.o fs/ext2/libext2fs.o fs/yaffs2/libyaffs2.o \
+ fs/ubifs/libubifs.o
+LIBS += net/libnet.o
+LIBS += disk/libdisk.o
+LIBS += drivers/bios_emulator/libatibiosemu.o
+LIBS += drivers/block/libblock.o
+LIBS += drivers/dma/libdma.o
+LIBS += drivers/fpga/libfpga.o
+LIBS += drivers/gpio/libgpio.o
+LIBS += drivers/hwmon/libhwmon.o
+LIBS += drivers/i2c/libi2c.o
+LIBS += drivers/input/libinput.o
+LIBS += drivers/misc/libmisc.o
+LIBS += drivers/mmc/libmmc.o
+LIBS += drivers/mtd/libmtd.o
+LIBS += drivers/mtd/nand/libnand.o
+LIBS += drivers/mtd/onenand/libonenand.o
+LIBS += drivers/mtd/ubi/libubi.o
+LIBS += drivers/mtd/spi/libspi_flash.o
+LIBS += drivers/net/libnet.o
+LIBS += drivers/net/phy/libphy.o
+LIBS += drivers/pci/libpci.o
+LIBS += drivers/pcmcia/libpcmcia.o
+LIBS += drivers/power/libpower.o
+LIBS += drivers/spi/libspi.o
ifeq ($(CPU),mpc83xx)
-LIBS += drivers/qe/qe.a
-LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
+LIBS += drivers/qe/libqe.o
+LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
ifeq ($(CPU),mpc85xx)
-LIBS += drivers/qe/qe.a
-LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a
-LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
+LIBS += drivers/qe/libqe.o
+LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
+LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
ifeq ($(CPU),mpc86xx)
-LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a
-LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
+LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
+LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
-LIBS += drivers/rtc/librtc.a
-LIBS += drivers/serial/libserial.a
-LIBS += drivers/twserial/libtws.a
-LIBS += drivers/usb/gadget/libusb_gadget.a
-LIBS += drivers/usb/host/libusb_host.a
-LIBS += drivers/usb/musb/libusb_musb.a
-LIBS += drivers/usb/phy/libusb_phy.a
-LIBS += drivers/video/libvideo.a
-LIBS += drivers/watchdog/libwatchdog.a
-LIBS += common/libcommon.a
-LIBS += lib/libfdt/libfdt.a
-LIBS += api/libapi.a
-LIBS += post/libpost.a
+LIBS += drivers/rtc/librtc.o
+LIBS += drivers/serial/libserial.o
+LIBS += drivers/twserial/libtws.o
+LIBS += drivers/usb/gadget/libusb_gadget.o
+LIBS += drivers/usb/host/libusb_host.o
+LIBS += drivers/usb/musb/libusb_musb.o
+LIBS += drivers/usb/phy/libusb_phy.o
+LIBS += drivers/video/libvideo.o
+LIBS += drivers/watchdog/libwatchdog.o
+LIBS += common/libcommon.o
+LIBS += lib/libfdt/libfdt.o
+LIBS += api/libapi.o
+LIBS += post/libpost.o
ifeq ($(SOC),omap3)
-LIBS += $(CPUDIR)/omap-common/libomap-common.a
+LIBS += $(CPUDIR)/omap-common/libomap-common.o
endif
ifeq ($(SOC),omap4)
-LIBS += $(CPUDIR)/omap-common/libomap-common.a
+LIBS += $(CPUDIR)/omap-common/libomap-common.o
endif
ifeq ($(SOC),s5pc1xx)
-LIBS += $(CPUDIR)/s5p-common/libs5p-common.a
+LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
endif
ifeq ($(SOC),s5pc2xx)
-LIBS += $(CPUDIR)/s5p-common/libs5p-common.a
+LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
endif
-LIBS := $(addprefix $(obj),$(LIBS))
+LIBS := $(addprefix $(obj),$(sort $(LIBS)))
.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
-LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
+LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o
LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
# Add GCC lib
ifdef USE_PRIVATE_LIBGCC
ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
-PLATFORM_LIBGCC = -L $(OBJTREE)/arch/$(ARCH)/lib -lgcc
+PLATFORM_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/libgcc.o
else
PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
endif
globally (CONFIG_CMD_MEM).
- CONFIG_SKIP_LOWLEVEL_INIT
- [ARM only] If this variable is defined, then certain
- low level initializations (like setting up the memory
- controller) are omitted and/or U-Boot does not
- relocate itself into RAM.
-
- Normally this variable MUST NOT be defined. The only
- exception is when U-Boot is loaded (to RAM) by some
- other boot loader or by a debugger which performs
- these initializations itself.
+ [ARM only] If this variable is defined, then certain
+ low level initializations (like setting up the memory
+ controller) are omitted and/or U-Boot does not
+ relocate itself into RAM.
+
+ Normally this variable MUST NOT be defined. The only
+ exception is when U-Boot is loaded (to RAM) by some
+ other boot loader or by a debugger which performs
+ these initializations itself.
- CONFIG_PRELOADER
Modifies the behaviour of start.S when compiling a loader
include $(TOPDIR)/config.mk
-LIB = $(obj)libapi.a
+LIB = $(obj)libapi.o
COBJS-$(CONFIG_API) += api.o api_net.o api_storage.o api_platform-$(ARCH).o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
COBJS = cpu.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS += generic.o
COBJS += timer.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
SOBJS = reset.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
_bss_end_ofs:
.word _end - _start
-.globl _datarel_start_ofs
-_datarel_start_ofs:
- .word __datarel_start - _start
-
-.globl _datarelrolocal_start_ofs
-_datarelrolocal_start_ofs:
- .word __datarelrolocal_start - _start
-
-.globl _datarellocal_start_ofs
-_datarellocal_start_ofs:
- .word __datarellocal_start - _start
-
-.globl _datarelro_start_ofs
-_datarelro_start_ofs:
- .word __datarelro_start - _start
-
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
.globl IRQ_STACK_START
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
#ifdef CONFIG_NAND_SPL
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
. = ALIGN(4);
.data : {
*(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
}
. = ALIGN(4);
- __rel_dyn_start = .;
- .rel.dyn : { *(.rel.dyn) }
- __rel_dyn_end = .;
-
- __dynsym_start = .;
- .dynsym : { *(.dynsym) }
. = .;
__u_boot_cmd_start = .;
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
COBJS = cpu.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
SOBJS = reset.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
_bss_end_ofs:
.word _end - _start
-.globl _datarel_start_ofs
-_datarel_start_ofs:
- .word __datarel_start - _start
-
-.globl _datarelrolocal_start_ofs
-_datarelrolocal_start_ofs:
- .word __datarelrolocal_start - _start
-
-.globl _datarellocal_start_ofs
-_datarellocal_start_ofs:
- .word __datarellocal_start - _start
-
-.globl _datarelro_start_ofs
-_datarelro_start_ofs:
- .word __datarelro_start - _start
-
-.globl _rel_dyn_start_ofs
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-
-.globl _rel_dyn_end_ofs
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-
-.globl _dynsym_start_ofs
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
/* IRQ stack memory (calculated at run-time) + 8 bytes */
.globl IRQ_STACK_START_IN
IRQ_STACK_START_IN:
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
+ ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
+ add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
add r1, r10, r1 /* r1 <- address of symbol in table */
ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
+ add r1, r9 /* r1 <- relocated sym addr */
b fixnext
fixrel:
/* relative fix: increase location by offset */
add r1, r1, r9
fixnext:
str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
+ add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
#endif
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
.word board_init_r - _start
#endif
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - _start
+_dynsym_start_ofs:
+ .word __dynsym_start - _start
+
#ifdef CONFIG_ENABLE_MMU
_mmu_table_base:
.word mmu_table
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS += aemif.o clock.o init.o mux.o timer.o wdt.o
SOBJS += lowlevel_init.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
. = ALIGN(4);
.data : {
*(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
}
- . = ALIGN(4);
- __rel_dyn_start = .;
- .rel.dyn : { *(.rel.dyn) }
- __rel_dyn_end = .;
-
- __dynsym_start = .;
- .dynsym : { *(.dynsym) }
-
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
COBJS = interrupts.o cpu.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS = flash.o mmc.o mmc_hw.o spi.o
SOBJS = $(obj)iap_entry.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
# this MUST be compiled as thumb code!
$(SOBJS):
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS-y += cache.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
* These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
*/
-.globl _bss_start
-_bss_start:
- .word __bss_start
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .word __bss_start - _start
-.globl _bss_end
-_bss_end:
- .word _end
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .word _end - _start
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
IRQ_STACK_START_IN:
.word 0x0badc0de
-.globl _datarel_start
-_datarel_start:
- .word __datarel_start
-
-.globl _datarelrolocal_start
-_datarelrolocal_start:
- .word __datarelrolocal_start
-
-.globl _datarellocal_start
-_datarellocal_start:
- .word __datarellocal_start
-
-.globl _datarelro_start
-_datarelro_start:
- .word __datarelro_start
-
-.globl _got_start
-_got_start:
- .word __got_start
-
-.globl _got_end
-_got_end:
- .word __got_end
-
/*
* the actual reset code
*/
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
- ldr r2, _TEXT_BASE
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
cmp r0, r6
- beq clear_bss
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
+ ldr r2, _TEXT_BASE
+ ldr r3, _bss_start_ofs
+ add r2, r0, r3 /* r2 <- source end address */
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
#ifndef CONFIG_PRELOADER
- /* fix got entries */
- ldr r1, _TEXT_BASE /* Text base */
- mov r0, r7 /* reloc addr */
- ldr r2, _got_start /* addr in Flash */
- ldr r3, _got_end /* addr in Flash */
- sub r3, r3, r1
- add r3, r3, r0
- sub r2, r2, r1
- add r2, r2, r0
-
+ /*
+ * fix .rel.dyn relocations
+ */
+ ldr r0, _TEXT_BASE /* r0 <- Text base */
+ sub r9, r6, r0 /* r9 <- relocation offset */
+ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
+ add r10, r10, r0 /* r10 <- sym table in FLASH */
+ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
+ add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
+ ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
+ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
fixloop:
- ldr r4, [r2]
- sub r4, r4, r1
- add r4, r4, r0
- str r4, [r2]
- add r2, r2, #4
+ ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
+ add r0, r0, r9 /* r0 <- location to fix up in RAM */
+ ldr r1, [r2, #4]
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
+ beq fixrel
+ cmp r7, #2 /* absolute fixup? */
+ beq fixabs
+ /* ignore unknown type of fixup */
+ b fixnext
+fixabs:
+ /* absolute fix: set location to (offset) symbol value */
+ mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
+ add r1, r10, r1 /* r1 <- address of symbol in table */
+ ldr r1, [r1, #4] /* r1 <- symbol value */
+ add r1, r9 /* r1 <- relocated sym addr */
+ b fixnext
+fixrel:
+ /* relative fix: increase location by offset */
+ ldr r1, [r0]
+ add r1, r1, r9
+fixnext:
+ str r1, [r0]
+ add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
#endif
clear_bss:
#ifndef CONFIG_PRELOADER
- ldr r0, _bss_start
- ldr r1, _bss_end
+ ldr r0, _bss_start_ofs
+ ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
- sub r0, r0, r3
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
- sub r1, r1, r3
add r1, r1, r4
mov r2, #0x00000000 /* clear */
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
- ldr r0, _TEXT_BASE
- ldr r2, _board_init_r
- sub r2, r2, r0
- add r2, r2, r7 /* position from board_init_r in RAM */
+ ldr r0, _board_init_r_ofs
+ adr r1, _start
+ add lr, r0, r1
+ add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
- mov lr, r2
mov pc, lr
-_board_init_r: .word board_init_r
+_board_init_r_ofs:
+ .word board_init_r - _start
+
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - _start
+_dynsym_start_ofs:
+ .word __dynsym_start - _start
/*
*************************************************************************
. = ALIGN(4);
.data : {
- *(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
}
- __got_start = .;
. = ALIGN(4);
- .got : { *(.got) }
- __got_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
SOBJS += reset.o
COBJS += timer.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
SOBJS += lowlevel_init.o
COBJS += reset.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
#include <asm/arch/hardware.h>
#include <asm/arch/at91_st.h>
-void board_reset(void) __attribute__((__weak__));
+void __attribute__((weak)) board_reset(void)
+{
+ /* true empty function for defining weak symbol */
+}
void reset_cpu(ulong ignored)
{
serial_exit();
#endif
- if (board_reset)
- board_reset();
+ board_reset();
/* Reset the cpu by setting up the watchdog timer */
writel(AT91_ST_WDMR_RSTEN | AT91_ST_WDMR_EXTEN | AT91_ST_WDMR_WDV(2),
#include <common.h>
-#include <asm/io.h>
-#include <asm/hardware.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
#include <asm/arch/at91_tc.h>
#include <asm/arch/at91_pmc.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* the number of clocks per CONFIG_SYS_HZ */
#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ)
-static u32 timestamp;
-static u32 lastinc;
-
int timer_init(void)
{
at91_tc_t *tc = (at91_tc_t *) AT91_TC_BASE;
writel(TIMER_LOAD_VAL, &tc->tc[0].rc);
writel(AT91_TC_CCR_SWTRG | AT91_TC_CCR_CLKEN, &tc->tc[0].ccr);
- lastinc = 0;
- timestamp = 0;
+ gd->lastinc = 0;
+ gd->tbl = 0;
return 0;
}
void set_timer(ulong t)
{
- timestamp = t;
+ gd->tbl = t;
}
void __udelay(unsigned long usec)
{
/* reset time */
at91_tc_t *tc = (at91_tc_t *) AT91_TC_BASE;
- lastinc = readl(&tc->tc[0].cv) & 0x0000ffff;
- timestamp = 0;
+ gd->lastinc = readl(&tc->tc[0].cv) & 0x0000ffff;
+ gd->tbl = 0;
}
ulong get_timer_raw(void)
now = readl(&tc->tc[0].cv) & 0x0000ffff;
- if (now >= lastinc) {
+ if (now >= gd->lastinc) {
/* normal mode */
- timestamp += now - lastinc;
+ gd->tbl += now - gd->lastinc;
} else {
/* we have an overflow ... */
- timestamp += now + TIMER_LOAD_VAL - lastinc;
+ gd->tbl += now + TIMER_LOAD_VAL - gd->lastinc;
}
- lastinc = now;
+ gd->lastinc = now;
- return timestamp;
+ return gd->tbl;
}
ulong get_timer_masked(void)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
SOBJS += lowlevel_init.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
#
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS = cpu.o led.o speed.o timer.o
SOBJS = lowlevel_init.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS += generic.o
COBJS += speed.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
SOBJS = lowlevel_init.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS-$(CONFIG_USE_IRQ) += interrupts.o
COBJS-y += speed.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
* These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
*/
-.globl _bss_start
-_bss_start:
- .word __bss_start
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .word __bss_start - _start
-.globl _bss_end
-_bss_end:
- .word _end
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .word _end - _start
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
IRQ_STACK_START_IN:
.word 0x0badc0de
-.globl _datarel_start
-_datarel_start:
- .word __datarel_start
-
-.globl _datarelrolocal_start
-_datarelrolocal_start:
- .word __datarelrolocal_start
-
-.globl _datarellocal_start
-_datarellocal_start:
- .word __datarellocal_start
-
-.globl _datarelro_start
-_datarelro_start:
- .word __datarelro_start
-
-.globl _got_start
-_got_start:
- .word __got_start
-
-.globl _got_end
-_got_end:
- .word __got_end
-
/*
* the actual start code
*/
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
- ldr r2, _TEXT_BASE
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
cmp r0, r6
- beq clear_bss
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
+ ldr r2, _TEXT_BASE
+ ldr r3, _bss_start_ofs
+ add r2, r0, r3 /* r2 <- source end address */
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
#ifndef CONFIG_PRELOADER
- /* fix got entries */
- ldr r1, _TEXT_BASE /* Text base */
- mov r0, r7 /* reloc addr */
- ldr r2, _got_start /* addr in Flash */
- ldr r3, _got_end /* addr in Flash */
- sub r3, r3, r1
- add r3, r3, r0
- sub r2, r2, r1
- add r2, r2, r0
-
+ /*
+ * fix .rel.dyn relocations
+ */
+ ldr r0, _TEXT_BASE /* r0 <- Text base */
+ sub r9, r6, r0 /* r9 <- relocation offset */
+ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
+ add r10, r10, r0 /* r10 <- sym table in FLASH */
+ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
+ add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
+ ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
+ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
fixloop:
- ldr r4, [r2]
- sub r4, r4, r1
- add r4, r4, r0
- str r4, [r2]
- add r2, r2, #4
+ ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
+ add r0, r0, r9 /* r0 <- location to fix up in RAM */
+ ldr r1, [r2, #4]
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
+ beq fixrel
+ cmp r7, #2 /* absolute fixup? */
+ beq fixabs
+ /* ignore unknown type of fixup */
+ b fixnext
+fixabs:
+ /* absolute fix: set location to (offset) symbol value */
+ mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
+ add r1, r10, r1 /* r1 <- address of symbol in table */
+ ldr r1, [r1, #4] /* r1 <- symbol value */
+ add r1, r9 /* r1 <- relocated sym addr */
+ b fixnext
+fixrel:
+ /* relative fix: increase location by offset */
+ ldr r1, [r0]
+ add r1, r1, r9
+fixnext:
+ str r1, [r0]
+ add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
#endif
clear_bss:
#ifndef CONFIG_PRELOADER
- ldr r0, _bss_start
- ldr r1, _bss_end
+ ldr r0, _bss_start_ofs
+ ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
- sub r0, r0, r3
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
- sub r1, r1, r3
add r1, r1, r4
mov r2, #0x00000000 /* clear */
* initialization, now running from RAM.
*/
#ifdef CONFIG_NAND_SPL
- ldr pc, _nand_boot
+ ldr r0, _nand_boot_ofs
+ mov pc, r0
-_nand_boot: .word nand_boot
+_nand_boot_ofs:
+ .word nand_boot
#else
- ldr r0, _TEXT_BASE
- ldr r2, _board_init_r
- sub r2, r2, r0
- add r2, r2, r7 /* position from board_init_r in RAM */
+ ldr r0, _board_init_r_ofs
+ adr r1, _start
+ add lr, r0, r1
+ add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
- mov lr, r2
mov pc, lr
-_board_init_r: .word board_init_r
+_board_init_r_ofs:
+ .word board_init_r - _start
#endif
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - _start
+_dynsym_start_ofs:
+ .word __dynsym_start - _start
+
/*
*************************************************************************
*
. = ALIGN(4);
.data : {
*(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
}
- __got_start = .;
. = ALIGN(4);
- .got : { *(.got) }
- __got_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
* These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
*/
-.globl _bss_start
-_bss_start:
- .word __bss_start
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .word __bss_start - _start
-.globl _bss_end
-_bss_end:
- .word _end
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .word _end - _start
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
IRQ_STACK_START_IN:
.word 0x0badc0de
-.globl _datarel_start
-_datarel_start:
- .word __datarel_start
-
-.globl _datarelrolocal_start
-_datarelrolocal_start:
- .word __datarelrolocal_start
-
-.globl _datarellocal_start
-_datarellocal_start:
- .word __datarellocal_start
-
-.globl _datarelro_start
-_datarelro_start:
- .word __datarelro_start
-
-.globl _got_start
-_got_start:
- .word __got_start
-
-.globl _got_end
-_got_end:
- .word __got_end
-
/*
* the actual reset code
*/
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
- ldr r2, _TEXT_BASE
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
cmp r0, r6
- beq clear_bss
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
+ ldr r2, _TEXT_BASE
+ ldr r3, _bss_start_ofs
+ add r2, r0, r3 /* r2 <- source end address */
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
#ifndef CONFIG_PRELOADER
- /* fix got entries */
- ldr r1, _TEXT_BASE /* Text base */
- mov r0, r7 /* reloc addr */
- ldr r2, _got_start /* addr in Flash */
- ldr r3, _got_end /* addr in Flash */
- sub r3, r3, r1
- add r3, r3, r0
- sub r2, r2, r1
- add r2, r2, r0
-
+ /*
+ * fix .rel.dyn relocations
+ */
+ ldr r0, _TEXT_BASE /* r0 <- Text base */
+ sub r9, r6, r0 /* r9 <- relocation offset */
+ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
+ add r10, r10, r0 /* r10 <- sym table in FLASH */
+ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
+ add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
+ ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
+ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
fixloop:
- ldr r4, [r2]
- sub r4, r4, r1
- add r4, r4, r0
- str r4, [r2]
- add r2, r2, #4
+ ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
+ add r0, r0, r9 /* r0 <- location to fix up in RAM */
+ ldr r1, [r2, #4]
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
+ beq fixrel
+ cmp r7, #2 /* absolute fixup? */
+ beq fixabs
+ /* ignore unknown type of fixup */
+ b fixnext
+fixabs:
+ /* absolute fix: set location to (offset) symbol value */
+ mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
+ add r1, r10, r1 /* r1 <- address of symbol in table */
+ ldr r1, [r1, #4] /* r1 <- symbol value */
+ add r1, r9 /* r1 <- relocated sym addr */
+ b fixnext
+fixrel:
+ /* relative fix: increase location by offset */
+ ldr r1, [r0]
+ add r1, r1, r9
+fixnext:
+ str r1, [r0]
+ add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
#endif
clear_bss:
#ifndef CONFIG_PRELOADER
- ldr r0, _bss_start
- ldr r1, _bss_end
+ ldr r0, _bss_start_ofs
+ ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
- sub r0, r0, r3
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
- sub r1, r1, r3
add r1, r1, r4
mov r2, #0x00000000 /* clear */
cmp r0, r1
bne clbss_l
+ bl coloured_LED_init
+ bl red_LED_on
#endif
/*
* initialization, now running from RAM.
*/
#ifdef CONFIG_NAND_SPL
- ldr pc, _nand_boot
+ ldr r0, _nand_boot_ofs
+ mov pc, r0
-_nand_boot: .word nand_boot
+_nand_boot_ofs:
+ .word nand_boot
#else
- ldr r0, _TEXT_BASE
- ldr r2, _board_init_r
- sub r2, r2, r0
- add r2, r2, r7 /* position from board_init_r in RAM */
+ ldr r0, _board_init_r_ofs
+ adr r1, _start
+ add lr, r0, r1
+ add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
- mov lr, r2
mov pc, lr
-_board_init_r: .word board_init_r
+_board_init_r_ofs:
+ .word board_init_r - _start
#endif
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - _start
+_dynsym_start_ofs:
+ .word __dynsym_start - _start
+
/*
*************************************************************************
*
. = ALIGN(4);
.data : {
*(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
}
- __got_start = .;
. = ALIGN(4);
- .got : { *(.got) }
- __got_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
COBJS = cpu.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS-$(CONFIG_AT91CAP9) += at91cap9_devices.o
COBJS-$(CONFIG_AT91SAM9260) += at91sam9260_devices.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
#else
at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* ETX2 */
at91_set_b_periph(AT91_PIO_PORTA, 24, 0); /* ETX3 */
+#if defined(CONFIG_AT91SAM9G20)
+ /* 9G20 BOOT ROM initializes those pins to multi-drive, undo that */
+ at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 0);
+ at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 0);
+#endif
#endif
at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* ETXER */
#endif
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS-y += cpu.o timer.o psc.o
COBJS-$(CONFIG_SOC_DM355) += dm355.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS-y = cpu.o
COBJS-y += dram.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS = clock.o reset.o timer.o
SOBJS =
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS = generic.o timer.o
MX27OBJS = reset.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS = generic.o reset.o timer.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS = timer.o gpio.o
SOBJS = reset.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS = timer.o cpuinfo.o
SOBJS = reset.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS-y = cpu.o
COBJS-y += dram.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS := reset.o \
timer.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
. = ALIGN(4);
- __rel_dyn_start = .;
- .rel.dyn : { *(.rel.dyn) }
- __rel_dyn_end = .;
-
- __dynsym_start = .;
- .dynsym : { *(.dynsym) }
-
- . = ALIGN(4);
-
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS = timer.o
SOBJS = reset.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>
+ * Copyright (c) 2010 Albert Aribaud <albert.aribaud@free.fr>
*
* See file CREDITS for list of people who contributed to this
* project.
.balignl 16,0xdeadbeef
+_vectors_end:
/*
*************************************************************************
/*
* These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
*/
-.globl _bss_start
-_bss_start:
- .word __bss_start
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .word __bss_start - _start
-.globl _bss_end
-_bss_end:
- .word _end
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .word _end - _start
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
IRQ_STACK_START_IN:
.word 0x0badc0de
-.globl _datarel_start
-_datarel_start:
- .word __datarel_start
-
-.globl _datarelrolocal_start
-_datarelrolocal_start:
- .word __datarelrolocal_start
-
-.globl _datarellocal_start
-_datarellocal_start:
- .word __datarellocal_start
-
-.globl _datarelro_start
-_datarelro_start:
- .word __datarelro_start
-
-.globl _got_start
-_got_start:
- .word __got_start
-
-.globl _got_end
-_got_end:
- .word __got_end
-
/*
* the actual reset code
*/
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
- ldr r2, _TEXT_BASE
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
cmp r0, r6
- beq clear_bss
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
+ ldr r2, _TEXT_BASE
+ ldr r3, _bss_start_ofs
+ add r2, r0, r3 /* r2 <- source end address */
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
#ifndef CONFIG_PRELOADER
- /* fix got entries */
- ldr r1, _TEXT_BASE /* Text base */
- mov r0, r7 /* reloc addr */
- ldr r2, _got_start /* addr in Flash */
- ldr r3, _got_end /* addr in Flash */
- sub r3, r3, r1
- add r3, r3, r0
- sub r2, r2, r1
- add r2, r2, r0
-
+ /*
+ * fix .rel.dyn relocations
+ */
+ ldr r0, _TEXT_BASE /* r0 <- Text base */
+ sub r9, r6, r0 /* r9 <- relocation offset */
+ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
+ add r10, r10, r0 /* r10 <- sym table in FLASH */
+ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
+ add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
+ ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
+ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
fixloop:
- ldr r4, [r2]
- sub r4, r4, r1
- add r4, r4, r0
- str r4, [r2]
- add r2, r2, #4
+ ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
+ add r0, r0, r9 /* r0 <- location to fix up in RAM */
+ ldr r1, [r2, #4]
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
+ beq fixrel
+ cmp r7, #2 /* absolute fixup? */
+ beq fixabs
+ /* ignore unknown type of fixup */
+ b fixnext
+fixabs:
+ /* absolute fix: set location to (offset) symbol value */
+ mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
+ add r1, r10, r1 /* r1 <- address of symbol in table */
+ ldr r1, [r1, #4] /* r1 <- symbol value */
+ add r1, r9 /* r1 <- relocated sym addr */
+ b fixnext
+fixrel:
+ /* relative fix: increase location by offset */
+ ldr r1, [r0]
+ add r1, r1, r9
+fixnext:
+ str r1, [r0]
+ add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
#endif
clear_bss:
#ifndef CONFIG_PRELOADER
- ldr r0, _bss_start
- ldr r1, _bss_end
+ ldr r0, _bss_start_ofs
+ ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
- sub r0, r0, r3
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
- sub r1, r1, r3
add r1, r1, r4
mov r2, #0x00000000 /* clear */
clbss_l:str r2, [r0] /* clear loop... */
add r0, r0, #4
cmp r0, r1
- bne clbss_l
+ blo clbss_l
#endif
/*
_nand_boot: .word nand_boot
#else
- ldr r0, _TEXT_BASE
- ldr r2, _board_init_r
- sub r2, r2, r0
- add r2, r2, r7 /* position from board_init_r in RAM */
+ ldr r0, _board_init_r_ofs
+ adr r1, _start
+ add lr, r0, r1
+ add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
- mov lr, r2
mov pc, lr
-_board_init_r: .word board_init_r
+_board_init_r_ofs:
+ .word board_init_r - _start
#endif
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - _start
+_dynsym_start_ofs:
+ .word __dynsym_start - _start
+
/*
*************************************************************************
*
. = ALIGN(4);
.data : {
*(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
}
- __got_start = .;
. = ALIGN(4);
- .got : { *(.got) }
- __got_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
COBJS = cpu.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
* These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
*/
-.globl _bss_start
-_bss_start:
- .word __bss_start
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .word __bss_start - _start
-.globl _bss_end
-_bss_end:
- .word _end
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .word _end - _start
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
IRQ_STACK_START_IN:
.word 0x0badc0de
-.globl _datarel_start
-_datarel_start:
- .word __datarel_start
-
-.globl _datarelrolocal_start
-_datarelrolocal_start:
- .word __datarelrolocal_start
-
-.globl _datarellocal_start
-_datarellocal_start:
- .word __datarellocal_start
-
-.globl _datarelro_start
-_datarelro_start:
- .word __datarelro_start
-
-.globl _got_start
-_got_start:
- .word __got_start
-
-.globl _got_end
-_got_end:
- .word __got_end
-
/*
* the actual reset code
*/
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
- ldr r2, _TEXT_BASE
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
cmp r0, r6
- beq clear_bss
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
+ ldr r2, _TEXT_BASE
+ ldr r3, _bss_start_ofs
+ add r2, r0, r3 /* r2 <- source end address */
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
#ifndef CONFIG_PRELOADER
- /* fix got entries */
- ldr r1, _TEXT_BASE /* Text base */
- mov r0, r7 /* reloc addr */
- ldr r2, _got_start /* addr in Flash */
- ldr r3, _got_end /* addr in Flash */
- sub r3, r3, r1
- add r3, r3, r0
- sub r2, r2, r1
- add r2, r2, r0
-
+ /*
+ * fix .rel.dyn relocations
+ */
+ ldr r0, _TEXT_BASE /* r0 <- Text base */
+ sub r9, r6, r0 /* r9 <- relocation offset */
+ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
+ add r10, r10, r0 /* r10 <- sym table in FLASH */
+ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
+ add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
+ ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
+ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
fixloop:
- ldr r4, [r2]
- sub r4, r4, r1
- add r4, r4, r0
- str r4, [r2]
- add r2, r2, #4
+ ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
+ add r0, r0, r9 /* r0 <- location to fix up in RAM */
+ ldr r1, [r2, #4]
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
+ beq fixrel
+ cmp r7, #2 /* absolute fixup? */
+ beq fixabs
+ /* ignore unknown type of fixup */
+ b fixnext
+fixabs:
+ /* absolute fix: set location to (offset) symbol value */
+ mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
+ add r1, r10, r1 /* r1 <- address of symbol in table */
+ ldr r1, [r1, #4] /* r1 <- symbol value */
+ add r1, r9 /* r1 <- relocated sym addr */
+ b fixnext
+fixrel:
+ /* relative fix: increase location by offset */
+ ldr r1, [r0]
+ add r1, r1, r9
+fixnext:
+ str r1, [r0]
+ add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
#endif
clear_bss:
#ifndef CONFIG_PRELOADER
- ldr r0, _bss_start
- ldr r1, _bss_end
+ ldr r0, _bss_start_ofs
+ ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
- sub r0, r0, r3
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
- sub r1, r1, r3
add r1, r1, r4
mov r2, #0x00000000 /* clear */
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
- ldr r0, _TEXT_BASE
- ldr r2, _board_init_r
- sub r2, r2, r0
- add r2, r2, r7 /* position from board_init_r in RAM */
+#ifdef CONFIG_NAND_SPL
+ ldr r0, _nand_boot_ofs
+ mov pc, r0
+
+_nand_boot_ofs:
+ .word nand_boot
+#else
+ ldr r0, _board_init_r_ofs
+ adr r1, _start
+ add lr, r0, r1
+ add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
- mov lr, r2
mov pc, lr
-_board_init_r: .word board_init_r
+_board_init_r_ofs:
+ .word board_init_r - _start
+#endif
+
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - _start
+_dynsym_start_ofs:
+ .word __dynsym_start - _start
/*
*************************************************************************
. = ALIGN(4);
.data : {
*(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
}
- __got_start = .;
. = ALIGN(4);
- .got : { *(.got) }
- __got_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START := start.o
COBJS := cpu.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
COBJS = soc.o clock.o iomux.o timer.o speed.o
SOBJS = lowlevel_init.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)libomap-common.a
+LIB = $(obj)libomap-common.o
SOBJS := reset.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
SOBJS := lowlevel_init.o
SOBJS += cache.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
*/
u32 get_sdr_cs_size(u32 cs)
{
- u32 size;
+ u32 size = 0;
/* TODO: Calculate the size based on EMIF4 configuration */
- size = CONFIG_SYS_CS0_SIZE;
+ if (cs == CS0)
+ size = CONFIG_SYS_CS0_SIZE;
return size;
}
&sdrc_actim_base1->ctrla);
writel(readl(&sdrc_actim_base0->ctrlb),
&sdrc_actim_base1->ctrlb);
+
+ writel(CMD_NOP, &sdrc_base->cs[cs].manual);
+ writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
+ writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+ writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+ writel(readl(&sdrc_base->cs[CS0].mr),
+ &sdrc_base->cs[CS1].mr);
}
/*
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
SOBJS += lowlevel_init.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
#include <asm/arch/sys_proto.h>
#include <asm/sizes.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* Routine: s_init
* Description: Does early system init of muxing and clocks.
*/
int dram_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
gd->ram_size = sdram_size();
include $(TOPDIR)/config.mk
-LIB = $(obj)libs5p-common.a
+LIB = $(obj)libs5p-common.o
COBJS-y += cpu_info.o
COBJS-y += timer.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
writel((PRESCALER_1 & 0xff) << 8, &timer->tcfg0);
writel((MUX_DIV_2 & 0xf) << MUX4_DIV_SHIFT, &timer->tcfg1);
- if (count_value == 0) {
- /* reset initial value */
- /* count_value = 2085937.5(HZ) (per 1 sec)*/
- count_value = get_pwm_clk() / ((PRESCALER_1 + 1) *
- (MUX_DIV_2 + 1));
-
- /* count_value / 100 = 20859.375(HZ) (per 10 msec) */
- count_value = count_value / 100;
- }
+ /* count_value = 2085937.5(HZ) (per 1 sec)*/
+ count_value = get_pwm_clk() / ((PRESCALER_1 + 1) *
+ (MUX_DIV_2 + 1));
+
+ /* count_value / 100 = 20859.375(HZ) (per 10 msec) */
+ count_value = count_value / 100;
/* set count value */
writel(count_value, &timer->tcntb4);
/* delay x useconds */
void __udelay(unsigned long usec)
{
+ struct s5p_timer *const timer = s5p_get_base_timer();
unsigned long tmo, tmp;
+ count_value = readl(&timer->tcntb4);
+
if (usec >= 1000) {
/*
* if "big" number, spread normalization
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(SOC).a
+LIB = $(obj)lib$(SOC).o
SOBJS = cache.o
SOBJS += reset.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
IRQ_STACK_START_IN:
.word 0x0badc0de
-.globl _datarel_start_ofs
-_datarel_start_ofs:
- .word __datarel_start - _start
-
-.globl _datarelrolocal_start_ofs
-_datarelrolocal_start_ofs:
- .word __datarelrolocal_start - _start
-
-.globl _datarellocal_start_ofs
-_datarellocal_start_ofs:
- .word __datarellocal_start - _start
-
-.globl _datarelro_start_ofs
-_datarelro_start_ofs:
- .word __datarelro_start - _start
-
-.globl _got_start_ofs
-_got_start_ofs:
- .word __got_start - _start
-
-.globl _got_end_Ofs
-_got_end_ofs:
- .word __got_end - _start
-
/*
* the actual reset code
*/
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+#ifndef CONFIG_PRELOADER
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+#endif
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
-#ifndef CONFIG_PRELOADER
- beq jump_2_ram
-#endif
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
#include <common.h>
#include <asm/io.h>
-#include <asm/arch/sys_proto.h>
/************************************************************
* sdelay() - simple spin loop. Will be constant time as
. = ALIGN(4);
.data : {
*(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
}
- . = ALIGN(4);
- __rel_dyn_start = .;
- .rel.dyn : { *(.rel.dyn) }
- __rel_dyn_end = .;
-
- __dynsym_start = .;
- .dynsym : { *(.dynsym) }
- __got_start = .;
. = ALIGN(4);
- .got : { *(.got) }
- __got_end = .;
+ . = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss : { *(.bss) }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libnpe.a
+LIB := $(obj)libnpe.o
LOCAL_CFLAGS += -I$(TOPDIR)/arch/arm/cpu/ixp/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB -D__linux
CFLAGS += $(LOCAL_CFLAGS)
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
* These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
*/
-.globl _bss_start
-_bss_start:
- .word __bss_start
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .word __bss_start - _start
-.globl _bss_end
-_bss_end:
- .word _end
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .word _end - _start
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
IRQ_STACK_START_IN:
.word 0x0badc0de
-.globl _datarel_start
-_datarel_start:
- .word __datarel_start
-
-.globl _datarelrolocal_start
-_datarelrolocal_start:
- .word __datarelrolocal_start
-
-.globl _datarellocal_start
-_datarellocal_start:
- .word __datarellocal_start
-
-.globl _datarelro_start
-_datarelro_start:
- .word __datarelro_start
-
-.globl _got_start
-_got_start:
- .word __got_start
-
-.globl _got_end
-_got_end:
- .word __got_end
-
/*
* the actual reset code
*/
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
- ldr r2, _TEXT_BASE
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
cmp r0, r6
- beq clear_bss
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
+ ldr r2, _TEXT_BASE
+ ldr r3, _bss_start_ofs
+ add r2, r0, r3 /* r2 <- source end address */
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
#ifndef CONFIG_PRELOADER
- /* fix got entries */
- ldr r1, _TEXT_BASE /* Text base */
- mov r0, r7 /* reloc addr */
- ldr r2, _got_start /* addr in Flash */
- ldr r3, _got_end /* addr in Flash */
- sub r3, r3, r1
- add r3, r3, r0
- sub r2, r2, r1
- add r2, r2, r0
-
+ /*
+ * fix .rel.dyn relocations
+ */
+ ldr r0, _TEXT_BASE /* r0 <- Text base */
+ sub r9, r6, r0 /* r9 <- relocation offset */
+ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
+ add r10, r10, r0 /* r10 <- sym table in FLASH */
+ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
+ add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
+ ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
+ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
fixloop:
- ldr r4, [r2]
- sub r4, r4, r1
- add r4, r4, r0
- str r4, [r2]
- add r2, r2, #4
+ ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
+ add r0, r0, r9 /* r0 <- location to fix up in RAM */
+ ldr r1, [r2, #4]
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
+ beq fixrel
+ cmp r7, #2 /* absolute fixup? */
+ beq fixabs
+ /* ignore unknown type of fixup */
+ b fixnext
+fixabs:
+ /* absolute fix: set location to (offset) symbol value */
+ mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
+ add r1, r10, r1 /* r1 <- address of symbol in table */
+ ldr r1, [r1, #4] /* r1 <- symbol value */
+ add r1, r9 /* r1 <- relocated sym addr */
+ b fixnext
+fixrel:
+ /* relative fix: increase location by offset */
+ ldr r1, [r0]
+ add r1, r1, r9
+fixnext:
+ str r1, [r0]
+ add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
#endif
clear_bss:
#ifndef CONFIG_PRELOADER
- ldr r0, _bss_start
- ldr r1, _bss_end
+ ldr r0, _bss_start_ofs
+ ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
- sub r0, r0, r3
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
- sub r1, r1, r3
add r1, r1, r4
mov r2, #0x00000000 /* clear */
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
- ldr r0, _TEXT_BASE
- ldr r2, _board_init_r
- sub r2, r2, r0
- add r2, r2, r7 /* position from board_init_r in RAM */
+ ldr r0, _board_init_r_ofs
+ adr r1, _start
+ add lr, r0, r1
+ add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
- mov lr, r2
mov pc, lr
-_board_init_r: .word board_init_r
+_board_init_r_ofs:
+ .word board_init_r - _start
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - _start
+_dynsym_start_ofs:
+ .word __dynsym_start - _start
/****************************************************************************/
/* */
. = ALIGN(4);
.data : {
*(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
}
- __got_start = .;
. = ALIGN(4);
- .got : { *(.got) }
- __got_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
COBJS = cpu.o speed.o timer.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
* These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
*/
-.globl _bss_start
-_bss_start:
- .word __bss_start
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .word __bss_start - _start
-.globl _bss_end
-_bss_end:
- .word _end
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .word _end - _start
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
IRQ_STACK_START_IN:
.word 0x0badc0de
-.globl _datarel_start
-_datarel_start:
- .word __datarel_start
-
-.globl _datarelrolocal_start
-_datarelrolocal_start:
- .word __datarelrolocal_start
-
-.globl _datarellocal_start
-_datarellocal_start:
- .word __datarellocal_start
-
-.globl _datarelro_start
-_datarelro_start:
- .word __datarelro_start
-
-.globl _got_start
-_got_start:
- .word __got_start
-
-.globl _got_end
-_got_end:
- .word __got_end
-
/*
* the actual reset code
*/
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
- ldr r2, _TEXT_BASE
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
cmp r0, r6
- beq clear_bss
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
+ ldr r2, _TEXT_BASE
+ ldr r3, _bss_start_ofs
+ add r2, r0, r3 /* r2 <- source end address */
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
#ifndef CONFIG_PRELOADER
- /* fix got entries */
- ldr r1, _TEXT_BASE /* Text base */
- mov r0, r7 /* reloc addr */
- ldr r2, _got_start /* addr in Flash */
- ldr r3, _got_end /* addr in Flash */
- sub r3, r3, r1
- add r3, r3, r0
- sub r2, r2, r1
- add r2, r2, r0
-
+ /*
+ * fix .rel.dyn relocations
+ */
+ ldr r0, _TEXT_BASE /* r0 <- Text base */
+ sub r9, r6, r0 /* r9 <- relocation offset */
+ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
+ add r10, r10, r0 /* r10 <- sym table in FLASH */
+ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
+ add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
+ ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
+ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
fixloop:
- ldr r4, [r2]
- sub r4, r4, r1
- add r4, r4, r0
- str r4, [r2]
- add r2, r2, #4
+ ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
+ add r0, r0, r9 /* r0 <- location to fix up in RAM */
+ ldr r1, [r2, #4]
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
+ beq fixrel
+ cmp r7, #2 /* absolute fixup? */
+ beq fixabs
+ /* ignore unknown type of fixup */
+ b fixnext
+fixabs:
+ /* absolute fix: set location to (offset) symbol value */
+ mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
+ add r1, r10, r1 /* r1 <- address of symbol in table */
+ ldr r1, [r1, #4] /* r1 <- symbol value */
+ add r1, r9 /* r1 <- relocated sym addr */
+ b fixnext
+fixrel:
+ /* relative fix: increase location by offset */
+ ldr r1, [r0]
+ add r1, r1, r9
+fixnext:
+ str r1, [r0]
+ add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
#endif
clear_bss:
#ifndef CONFIG_PRELOADER
- ldr r0, _bss_start
- ldr r1, _bss_end
+ ldr r0, _bss_start_ofs
+ ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
- sub r0, r0, r3
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
- sub r1, r1, r3
add r1, r1, r4
mov r2, #0x00000000 /* clear */
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
- ldr r0, _TEXT_BASE
- ldr r2, _board_init_r
- sub r2, r2, r0
- add r2, r2, r7 /* position from board_init_r in RAM */
+ ldr r0, _board_init_r_ofs
+ adr r1, _start
+ add lr, r0, r1
+ add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
- mov lr, r2
mov pc, lr
-_board_init_r: .word board_init_r
+_board_init_r_ofs:
+ .word board_init_r - _start
+
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - _start
+_dynsym_start_ofs:
+ .word __dynsym_start - _start
/*
*************************************************************************
. = ALIGN(4);
.data : {
*(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
}
- __got_start = .;
. = ALIGN(4);
- .got : { *(.got) }
- __got_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
+ cmp r0, r6
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r2, _TEXT_BASE
ldr r3, _bss_start_ofs
add r2, r0, r3 /* r2 <- source end address */
- cmp r0, r6
- beq clear_bss
stmfd sp!, {r0-r12}
copy_loop:
ldmia r0!, {r3-r5, r7-r11} /* copy from source address [r0] */
- stmia r6!, {r3-r5, r7-r11} /* copy to target address [r1] */
+ stmia r1!, {r3-r5, r7-r11} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
ldmfd sp!, {r0-r12}
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r7, r0 /* r9 <- relocation offset */
+ sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
add r0, r9 /* r0 <- location to fix up in RAM */
ldr r1, [r2, #4]
- and r8, r1, #0xff
- cmp r8, #23 /* relative fixup? */
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
beq fixrel
- cmp r8, #2 /* absolute fixup? */
+ cmp r7, #2 /* absolute fixup? */
beq fixabs
/* ignore unknown type of fixup */
b fixnext
ldr r0, _bss_start_ofs
ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
add r1, r1, r4
mov r2, #0x00000000 /* clear */
add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
mov pc, lr
*(.data)
}
- . = ALIGN(4);
- __rel_dyn_start = .;
- .rel.dyn : { *(.rel.dyn) }
- __rel_dyn_end = .;
-
- __dynsym_start = .;
- .dynsym : { *(.dynsym) }
-
. = ALIGN(4);
. = .;
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
* These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
*/
-.globl _bss_start
-_bss_start:
- .word __bss_start
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .word __bss_start - _start
-.globl _bss_end
-_bss_end:
- .word _end
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .word _end - _start
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
IRQ_STACK_START_IN:
.word 0x0badc0de
-.globl _datarel_start
-_datarel_start:
- .word __datarel_start
-
-.globl _datarelrolocal_start
-_datarelrolocal_start:
- .word __datarelrolocal_start
-
-.globl _datarellocal_start
-_datarellocal_start:
- .word __datarellocal_start
-
-.globl _datarelro_start
-_datarelro_start:
- .word __datarelro_start
-
-.globl _got_start
-_got_start:
- .word __got_start
-
-.globl _got_end
-_got_end:
- .word __got_end
-
/*
* the actual reset code
*/
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
- ldr r2, _TEXT_BASE
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
cmp r0, r6
- beq clear_bss
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
+ ldr r2, _TEXT_BASE
+ ldr r3, _bss_start_ofs
+ add r2, r0, r3 /* r2 <- source end address */
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
#ifndef CONFIG_PRELOADER
- /* fix got entries */
- ldr r1, _TEXT_BASE /* Text base */
- mov r0, r7 /* reloc addr */
- ldr r2, _got_start /* addr in Flash */
- ldr r3, _got_end /* addr in Flash */
- sub r3, r3, r1
- add r3, r3, r0
- sub r2, r2, r1
- add r2, r2, r0
-
+ /*
+ * fix .rel.dyn relocations
+ */
+ ldr r0, _TEXT_BASE /* r0 <- Text base */
+ sub r9, r6, r0 /* r9 <- relocation offset */
+ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
+ add r10, r10, r0 /* r10 <- sym table in FLASH */
+ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
+ add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
+ ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
+ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
fixloop:
- ldr r4, [r2]
- sub r4, r4, r1
- add r4, r4, r0
- str r4, [r2]
- add r2, r2, #4
+ ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
+ add r0, r0, r9 /* r0 <- location to fix up in RAM */
+ ldr r1, [r2, #4]
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
+ beq fixrel
+ cmp r7, #2 /* absolute fixup? */
+ beq fixabs
+ /* ignore unknown type of fixup */
+ b fixnext
+fixabs:
+ /* absolute fix: set location to (offset) symbol value */
+ mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
+ add r1, r10, r1 /* r1 <- address of symbol in table */
+ ldr r1, [r1, #4] /* r1 <- symbol value */
+ add r1, r9 /* r1 <- relocated sym addr */
+ b fixnext
+fixrel:
+ /* relative fix: increase location by offset */
+ ldr r1, [r0]
+ add r1, r1, r9
+fixnext:
+ str r1, [r0]
+ add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
#endif
-/*
- now copy to sram the interrupt vector
-*/
- adr r0, real_vectors
- add r2, r0, #1024
- ldr r1, =0x0c000000
- add r1, r1, #0x08
-vector_copy_loop:
- ldmia r0!, {r3-r10}
- stmia r1!, {r3-r10}
- cmp r0, r2
- blo vector_copy_loop
clear_bss:
#ifndef CONFIG_PRELOADER
- ldr r0, _bss_start
- ldr r1, _bss_end
+ ldr r0, _bss_start_ofs
+ ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
- sub r0, r0, r3
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
- sub r1, r1, r3
add r1, r1, r4
mov r2, #0x00000000 /* clear */
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
- ldr r0, _TEXT_BASE
- ldr r2, _board_init_r
- sub r2, r2, r0
- add r2, r2, r7 /* position from board_init_r in RAM */
+ ldr r0, _board_init_r_ofs
+ adr r1, _start
+ add lr, r0, r1
+ add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
- mov lr, r2
mov pc, lr
-_board_init_r: .word board_init_r
+_board_init_r_ofs:
+ .word board_init_r - _start
+
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - _start
+_dynsym_start_ofs:
+ .word __dynsym_start - _start
/*
*************************************************************************
. = ALIGN(4);
.data : {
*(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
}
- __got_start = .;
. = ALIGN(4);
- .got : { *(.got) }
- __got_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
* These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
*/
-.globl _bss_start
-_bss_start:
- .word __bss_start
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .word __bss_start - _start
-.globl _bss_end
-_bss_end:
- .word _end
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .word _end - _start
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
IRQ_STACK_START_IN:
.word 0x0badc0de
-.globl _datarel_start
-_datarel_start:
- .word __datarel_start
-
-.globl _datarelrolocal_start
-_datarelrolocal_start:
- .word __datarelrolocal_start
-
-.globl _datarellocal_start
-_datarellocal_start:
- .word __datarellocal_start
-
-.globl _datarelro_start
-_datarelro_start:
- .word __datarelro_start
-
-.globl _got_start
-_got_start:
- .word __got_start
-
-.globl _got_end
-_got_end:
- .word __got_end
-
/*
* the actual reset code
*/
/* Set stackpointer in internal RAM to call board_init_f */
call_board_init_f:
ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
+ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r0,=0x00000000
bl board_init_f
mov r4, r0 /* save addr_sp */
mov r5, r1 /* save addr of gd */
mov r6, r2 /* save addr of destination */
- mov r7, r2 /* save addr of destination */
/* Set up the stack */
stack_setup:
mov sp, r4
adr r0, _start
- ldr r2, _TEXT_BASE
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
cmp r0, r6
- beq clear_bss
+ beq clear_bss /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy_loop */
+ ldr r2, _TEXT_BASE
+ ldr r3, _bss_start_ofs
+ add r2, r0, r3 /* r2 <- source end address */
copy_loop:
ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r6!, {r9-r10} /* copy to target address [r1] */
+ stmia r1!, {r9-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
#ifndef CONFIG_PRELOADER
- /* fix got entries */
- ldr r1, _TEXT_BASE /* Text base */
- mov r0, r7 /* reloc addr */
- ldr r2, _got_start /* addr in Flash */
- ldr r3, _got_end /* addr in Flash */
- sub r3, r3, r1
- add r3, r3, r0
- sub r2, r2, r1
- add r2, r2, r0
-
+ /*
+ * fix .rel.dyn relocations
+ */
+ ldr r0, _TEXT_BASE /* r0 <- Text base */
+ sub r9, r6, r0 /* r9 <- relocation offset */
+ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
+ add r10, r10, r0 /* r10 <- sym table in FLASH */
+ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
+ add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
+ ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
+ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
fixloop:
- ldr r4, [r2]
- sub r4, r4, r1
- add r4, r4, r0
- str r4, [r2]
- add r2, r2, #4
+ ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
+ add r0, r0, r9 /* r0 <- location to fix up in RAM */
+ ldr r1, [r2, #4]
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
+ beq fixrel
+ cmp r7, #2 /* absolute fixup? */
+ beq fixabs
+ /* ignore unknown type of fixup */
+ b fixnext
+fixabs:
+ /* absolute fix: set location to (offset) symbol value */
+ mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
+ add r1, r10, r1 /* r1 <- address of symbol in table */
+ ldr r1, [r1, #4] /* r1 <- symbol value */
+ add r1, r9 /* r1 <- relocated sym addr */
+ b fixnext
+fixrel:
+ /* relative fix: increase location by offset */
+ ldr r1, [r0]
+ add r1, r1, r9
+fixnext:
+ str r1, [r0]
+ add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
cmp r2, r3
blo fixloop
#endif
clear_bss:
#ifndef CONFIG_PRELOADER
- ldr r0, _bss_start
- ldr r1, _bss_end
+ ldr r0, _bss_start_ofs
+ ldr r1, _bss_end_ofs
ldr r3, _TEXT_BASE /* Text base */
- mov r4, r7 /* reloc addr */
- sub r0, r0, r3
+ mov r4, r6 /* reloc addr */
add r0, r0, r4
- sub r1, r1, r3
add r1, r1, r4
mov r2, #0x00000000 /* clear */
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
- ldr r0, _TEXT_BASE
- ldr r2, _board_init_r
- sub r2, r2, r0
- add r2, r2, r7 /* position from board_init_r in RAM */
+ ldr r0, _board_init_r_ofs
+ adr r1, _start
+ add lr, r0, r1
+ add lr, lr, r9
/* setup parameters for board_init_r */
mov r0, r5 /* gd_t */
- mov r1, r7 /* dest_addr */
+ mov r1, r6 /* dest_addr */
/* jump to it ... */
- mov lr, r2
mov pc, lr
-_board_init_r: .word board_init_r
+_board_init_r_ofs:
+ .word board_init_r - _start
+
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - _start
+_dynsym_start_ofs:
+ .word __dynsym_start - _start
/*
*************************************************************************
. = ALIGN(4);
.data : {
*(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
}
- __got_start = .;
. = ALIGN(4);
- .got : { *(.got) }
- __got_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
}
--- /dev/null
+/*
+ * Copyright (C) 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ *
+ * Shutdown Controller
+ * Based on AT91SAM9XE datasheet
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SHDWN_H
+#define AT91_SHDWN_H
+
+#ifndef __ASSEMBLY__
+
+struct at91_shdwn {
+ u32 cr; /* Control Rer. WO */
+ u32 mr; /* Mode Register RW 0x00000003 */
+ u32 sr; /* Status Register RO 0x00000000 */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_SHDW_CR_KEY 0xa5000000
+#define AT91_SHDW_CR_SHDW 0x00000001
+
+#define AT91_SHDW_MR_RTTWKEN 0x00010000
+#define AT91_SHDW_MR_CPTWK0 0x000000f0
+#define AT91_SHDW_MR_WKMODE0H2L 0x00000002
+#define AT91_SHDW_MR_WKMODE0L2H 0x00000001
+
+#define AT91_SHDW_SR_RTTWK 0x00010000
+#define AT91_SHDW_SR_WAKEUP0 0x00000001
+
+#endif
#define AT91_PIO_BASE 0xfffff400
#define AT91_PMC_BASE 0xfffffc00
#define AT91_RSTC_BASE 0xfffffd00
+#define AT91_SHDWN_BASE 0xfffffd10
#define AT91_RTT_BASE 0xfffffd20
#define AT91_PIT_BASE 0xfffffd30
#define AT91_WDT_BASE 0xfffffd40
#include <asm/arch/at91sam9260.h>
#define AT91_BASE_MCI AT91SAM9260_BASE_MCI
#define AT91_BASE_SPI AT91SAM9260_BASE_SPI0
+#define AT91_BASE_SPI1 AT91SAM9260_BASE_SPI1
#define AT91_ID_UHP AT91SAM9260_ID_UHP
#define AT91_PMC_UHP AT91SAM926x_PMC_UHP
#elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
#define USART2_BASE AT91_USART2
#define USART3_BASE (AT91_BASE_SYS + AT91_DBGU)
#define SPI0_BASE AT91_BASE_SPI
+#define SPI1_BASE AT91_BASE_SPI1
#endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */
unsigned long plla_rate_hz;
unsigned long pllb_rate_hz;
unsigned long at91_pllb_usb_init;
- /* "static data" needed by at91's timer.c */
+#endif
+#ifdef CONFIG_ARM
+ /* "static data" needed by most of timer.c on ARM platforms */
unsigned long timer_rate_hz;
unsigned long tbl;
unsigned long tbu;
unsigned long long timer_reset_value;
+ unsigned long lastinc;
#endif
unsigned long relocaddr; /* Start address of U-Boot in RAM */
phys_size_t ram_size; /* RAM size */
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(ARCH).a
-LIBGCC = $(obj)libgcc.a
+LIB = $(obj)lib$(ARCH).o
+LIBGCC = $(obj)libgcc.o
GLSOBJS += _ashldi3.o
GLSOBJS += _ashrdi3.o
LGOBJS := $(addprefix $(obj),$(GLSOBJS)) \
$(addprefix $(obj),$(GLCOBJS))
-# Always build libarm.a
+# Always build libarm.o
TARGETS := $(LIB)
# Build private libgcc only when asked for
all: $(TARGETS)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
$(LIBGCC): $(obj).depend $(LGOBJS)
- $(AR) $(ARFLAGS) $@ $(LGOBJS)
+ $(call cmd_link_o_target, $(LGOBJS))
#########################################################################
ulong addr, addr_sp;
/* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_SP_ADDR);
+ gd = (gd_t *) ((CONFIG_SYS_INIT_SP_ADDR) & ~0x07);
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
/* disable write buffer as well (page 2-22) */
asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
#endif
-#ifdef CONFIG_ARMV7
+#ifdef CONFIG_OMAP34XX
void v7_flush_cache_all(void);
v7_flush_cache_all();
include $(TOPDIR)/config.mk
-LIB := $(obj)lib$(CPU).a
+LIB := $(obj)lib$(CPU).o
START-y += start.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)lib$(SOC).a
+LIB := $(obj)lib$(SOC).o
COBJS := portmux.o clk.o mmu.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).o
SOBJS-y += memset.o
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
EXTRA :=
CEXTRA := initcode.o
COBJS-y += traps.o
COBJS-$(CONFIG_HW_WATCHDOG) += watchdog.o
-ifeq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
-COBJS-y += initcode.o
-endif
-
SRCS := $(SEXTRA:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS))
EXTRA := $(addprefix $(obj),$(EXTRA))
all: $(obj).depend $(LIB) $(obj).depend $(EXTRA) $(CEXTRA) $(SEXTRA) check_initcode
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
$(OBJS): $(obj)bootrom-asm-offsets.h
$(obj)bootrom-asm-offsets.c: bootrom-asm-offsets.c.in bootrom-asm-offsets.awk
CFLAGS += -DBFIN_BOARD_NAME='"$(BOARD)"'
-LIB = $(obj)lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).o
SOBJS-y += ins.o
SOBJS-y += memcmp.o
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
*/
#define COMMON_INS(func, ops) \
+.section .text._ins##func; \
ENTRY(_ins##func) \
P0 = R0; /* P0 = port */ \
CLI_OUTER; /* 3 instructions before first read access */ \
.align 2
+.section .text._outsl
ENTRY(_outsl)
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
RTS;
ENDPROC(_outsl)
+.section .text._outsw
ENTRY(_outsw)
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
RTS;
ENDPROC(_outsw)
+.section .text._outsb
ENTRY(_outsb)
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
RTS;
ENDPROC(_outsb)
+.section .text._outsw_8
ENTRY(_outsw_8)
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
*(.dynbss)
*(.bss .bss.*)
*(COMMON)
+ . = ALIGN(4);
} >ram_data
__bss_vma = ADDR(.bss);
__bss_len = SIZEOF(.bss);
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o start16.o resetvec.o
COBJS = interrupts.o cpu.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)lib$(SOC).a
+LIB := $(obj)lib$(SOC).o
COBJS-$(CONFIG_SYS_SC520) += sc520.o
COBJS-$(CONFIG_SYS_SC520_SSI) += sc520_ssi.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).o
SOBJS-y += bios.o
SOBJS-y += bios_pci.o
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
# CFLAGS += -DET_DEBUG
-LIB = lib$(CPU).a
+LIB = lib$(CPU).o
START = start.o
COBJS = cpu.o speed.o cpu_init.o interrupts.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
# CFLAGS += -DET_DEBUG
-LIB = lib$(CPU).a
+LIB = lib$(CPU).o
START = start.o
COBJS = cpu.o speed.o cpu_init.o interrupts.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
# CFLAGS += -DET_DEBUG
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
COBJS = interrupts.o cpu.o speed.o cpu_init.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
# CFLAGS += -DET_DEBUG
-LIB = lib$(CPU).a
+LIB = lib$(CPU).o
START =
COBJS = cpu.o speed.o cpu_init.o interrupts.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
# CFLAGS += -DET_DEBUG
-LIB = lib$(CPU).a
+LIB = lib$(CPU).o
START = start.o
COBJS = cpu.o speed.o cpu_init.o interrupts.o pci.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
# CFLAGS += -DET_DEBUG
-LIB = lib$(CPU).a
+LIB = lib$(CPU).o
START =
COBJS = cpu.o speed.o cpu_init.o pci.o interrupts.o slicetimer.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).o
SOBJS-y +=
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
SOBJS = irq.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).o
SOBJS-y +=
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
SOBJS-y = cache.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).o
SOBJS-y +=
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
SOBJS = exceptions.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).o
SOBJS-y += cache.o
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
#
-# (C) Copyright 2000-2002
+# (C) Copyright 2000-2010
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
STANDALONE_LOAD_ADDR = 0x40000
-PLATFORM_RELFLAGS += -mrelocatable
+PLATFORM_RELFLAGS += -mrelocatable -ffunction-sections -fdata-sections
PLATFORM_CPPFLAGS += -DCONFIG_PPC -D__powerpc__
-PLATFORM_LDFLAGS += -n
+PLATFORM_LDFLAGS += -n --gc-sections
+
+ifdef CONFIG_SYS_LDSCRIPT
+# need to strip off double quotes
+LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
+else ifdef CONFIG_NAND_SPL
+LDSCRIPT := $(SRCTREE)/$(CONFIG_BOARDDIR)/u-boot-nand.lds
+else
+ifneq ($(wildcard $(SRCTREE)/arch/powerpc/cpu/$(CPU)/u-boot.lds),)
+LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/$(CPU)/u-boot.lds
+endif
+endif
#
# When cross-compiling on NetBSD, we have to define __PPC__ or else we
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
SOBJS = cache.o kgdb.o io.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ * (C) Copyright 2010 Wolfgang Denk <wd@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
* MA 02111-1307 USA
*/
-/*
- * u-boot.lds - linker script for U-Boot on mpc7448hpc2 Board.
- */
-
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/74xx_7xx/start.o (.text)
-
-/* store the environment in a seperate sector in the boot flash */
-/* . = env_offset; */
-/* common/env_embedded.o(.text) */
+ arch/powerpc/cpu/74xx_7xx/start.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
+
. = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
$(shell mkdir -p $(OBJTREE)/board/freescale/common)
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
COBJS-y := cpu.o
COBJS-y += serial.o
COBJS-y += speed.o
COBJS-$(CONFIG_FSL_DIU_FB) += diu.o
-COBJS-$(CONFIG_FSL_DIU_FB) += ../../../../board/freescale/common/fsl_diu_fb.o
COBJS-$(CONFIG_CMD_IDE) += ide.o
COBJS-$(CONFIG_IIM) += iim.o
COBJS-$(CONFIG_PCI) += pci.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
#
-# (C) Copyright 2007-2009 DENX Software Engineering
+# (C) Copyright 2007-2010 DENX Software Engineering
#
# See file CREDITS for list of people who contributed to this
# project.
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
+
PLATFORM_RELFLAGS += -fPIC -meabi
PLATFORM_CPPFLAGS += -DCONFIG_MPC512X -DCONFIG_E300 \
-ffixed-r2 -msoft-float -mcpu=603e
-
-# Use default linker script.
-# A board port can override this setting in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc512x/u-boot.lds
/*
- * (C) Copyright 2007 DENX Software Engineering.
+ * (C) Copyright 2007-2010 DENX Software Engineering.
*
* See file CREDITS for list of people who contributed to this
* project.
OUTPUT_ARCH(powerpc)
SECTIONS
{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc512x/start.o (.text)
- *(.text)
- *(.got1)
+ arch/powerpc/cpu/mpc512x/start.o (.text*)
+ *(.text*)
. = ALIGN(16);
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
+ KEEP(*(.fixup))
*(.fixup)
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
COBJS = serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o spi.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
# MA 02111-1307 USA
#
-#
-# File: config.mk
-#
-# Discription: compiler flags and make definitions
-#
-
-
PLATFORM_RELFLAGS += -fPIC -meabi
PLATFORM_CPPFLAGS += -DCONFIG_5xx -ffixed-r2 -mpowerpc -msoft-float
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xx/u-boot.lds
/*
- * (C) Copyright 2001 Wolfgang Denk, DENX Software Engineering, wd@denx.de
+ * (C) Copyright 2001-2010 Wolfgang Denk, DENX Software Engineering, wd@denx.de
* (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc5xx/start.o (.text)
+ arch/powerpc/cpu/mpc5xx/start.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
_end = . ;
PROVIDE (end = .);
-/* . = env_start;
- .ppcenv :
- {
- common/env_embedded.o (.ppcenv)
- }
-*/
+ . = env_start;
+ .ppcenv :
+ {
+ common/env_embedded.o (.ppcenv)
+ }
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-SOBJS = io.o firmware_sc_task_bestcomm.impl.o
-COBJS = i2c.o traps.o cpu.o cpu_init.o ide.o interrupts.o \
- loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
+LIB = $(obj)lib$(CPU).o
+
+SSTART = start.o
+CSTART = traps.o
+SOBJS += io.o
+SOBJS += firmware_sc_task_bestcomm.impl.o
+COBJS-y += i2c.o
+COBJS-y += cpu.o
+COBJS-y += cpu_init.o
+COBJS-y += ide.o
+COBJS-y += interrupts.o
+COBJS-y += loadtask.o
+COBJS-y += pci_mpc5200.o
+COBJS-y += serial.o
+COBJS-y += speed.o
+COBJS-$(CONFIG_CMD_USB) += usb_ohci.o
+COBJS-$(CONFIG_CMD_USB) += usb.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+START := $(addprefix $(obj),$(SSTART) $(CSTART))
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2010
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
PLATFORM_CPPFLAGS += -DCONFIG_MPC5xxx -ffixed-r2 \
-mstring -mcpu=603e -mmultiple
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot.lds
#include <mpc5xxx.h>
#include <i2c.h>
+#if !defined(CONFIG_I2C_MULTI_BUS)
#if (CONFIG_SYS_I2C_MODULE == 2)
#define I2C_BASE MPC5XXX_I2C2
#elif (CONFIG_SYS_I2C_MODULE == 1)
#else
#error CONFIG_SYS_I2C_MODULE is not properly configured
#endif
+#else
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) =
+ CONFIG_SYS_SPD_BUS_NUM;
+static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED,
+ CONFIG_SYS_I2C_SPEED};
+
+static const unsigned long i2c_dev[2] = {
+ MPC5XXX_I2C1,
+ MPC5XXX_I2C2,
+};
+
+#define I2C_BASE ((struct mpc5xxx_i2c *)i2c_dev[i2c_bus_num])
+#endif
#define I2C_TIMEOUT 6667
#define I2C_RETRIES 3
return ret;
}
+#if defined(CONFIG_I2C_MULTI_BUS)
+int i2c_set_bus_num(unsigned int bus)
+{
+ if (bus > 1)
+ return -1;
+
+ i2c_bus_num = bus;
+ i2c_init(i2c_bus_speed[bus], CONFIG_SYS_I2C_SLAVE);
+ return 0;
+}
+
+int i2c_set_bus_speed(unsigned int speed)
+{
+ i2c_init(speed, CONFIG_SYS_I2C_SLAVE);
+ return 0;
+}
+
+unsigned int i2c_get_bus_num(void)
+{
+ return i2c_bus_num;
+}
+
+unsigned int i2c_get_bus_speed(void)
+{
+ return i2c_bus_speed[i2c_bus_num];
+}
+#endif
+
+
#endif /* CONFIG_HARD_I2C */
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc5xxx/start.o (.text)
- arch/powerpc/cpu/mpc5xxx/traps.o (.text)
- lib/crc32.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
+ arch/powerpc/cpu/mpc5xxx/start.o (.text*)
+ arch/powerpc/cpu/mpc5xxx/traps.o (.text*)
. = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.ppcenv)
+ common/env_embedded.o (.ppcenv*)
- *(.text)
- *(.got1)
+ *(.text*)
. = ALIGN(16);
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
/*
- * (C) Copyright 2003-2007
+ * (C) Copyright 2003-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc5xxx/start.o (.text)
- *(.text)
- *(.got1)
+ arch/powerpc/cpu/mpc5xxx/start.o (.text*)
+ arch/powerpc/cpu/mpc5xxx/traps.o (.text*)
+ *(.text*)
. = ALIGN(16);
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
*(COMMON)
+ *(.bss*)
+ *(.sbss*)
. = ALIGN(4);
}
_end = . ;
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
SOBJS = io.o fec_dma_tasks.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2010
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
PLATFORM_CPPFLAGS += -DCONFIG_MPC8220 -ffixed-r2 \
-mstring -mcpu=603e -mmultiple
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc8220/u-boot.lds
/*
- * (C) Copyright 2003-2004
+ * (C) Copyright 2003-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8220/start.o (.text)
- *(.text)
- *(.got1)
+ arch/powerpc/cpu/mpc8220/start.o (.text*)
+ *(.text*)
. = ALIGN(16);
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
$(shell mkdir -p $(obj)drivers/i2c)
endif
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
COBJS = traps.o cpu.o cpu_init.o interrupts.o speed.o \
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
$(obj)bedbug_603e.c:
ln -sf $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2010
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
PLATFORM_RELFLAGS += -fPIC -meabi
PLATFORM_CPPFLAGS += -DCONFIG_MPC824X -ffixed-r2 -mstring -mcpu=603e -msoft-float
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc824x/u-boot.lds
/*
- * (C) Copyright 2001-2007
+ * (C) Copyright 2001-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc824x/start.o (.text)
- *(.text)
- *(.got1)
+ arch/powerpc/cpu/mpc824x/start.o (.text*)
+ *(.text*)
. = ALIGN(16);
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o kgdb.o
COBJS = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(obj)kgdb.o
+ $(call cmd_link_o_target, $(OBJS) $(obj)kgdb.o)
#########################################################################
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2010
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
PLATFORM_CPPFLAGS += -DCONFIG_8260 -DCONFIG_CPM2 -ffixed-r2 \
-mstring -mcpu=603e -mmultiple
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc8260/u-boot.lds
/*
- * (C) Copyright 2001-2007
+ * (C) Copyright 2001-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8260/start.o (.text)
- *(.text)
- *(.got1)
+ arch/powerpc/cpu/mpc8260/start.o (.text*)
+ *(.text*)
. = ALIGN(16);
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
PLATFORM_CPPFLAGS += -DCONFIG_MPC83xx -DCONFIG_E300 \
-ffixed-r2 -msoft-float
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc83xx/u-boot.lds
bne 1b
stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
+ /* Wait for HW to catch up */
+ lwz r4, LBLAWAR1(r3)
+ twi 0,r4,0
+ isync
blr
/* Though all the LBIU Local Access Windows and LBC Banks will be
xor r4, r4, r4
stw r4, LBLAWBAR1(r3)
stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
+ /* Wait for HW to catch up */
+ lwz r4, LBLAWAR1(r3)
+ twi 0,r4,0
+ isync
blr
#endif /* CONFIG_SYS_FLASHBOOT */
/*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc83xx/start.o (.text)
- *(.text)
- *(.got1)
+ arch/powerpc/cpu/mpc83xx/start.o (.text*)
+ *(.text*)
. = ALIGN(16);
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o resetvec.o
SOBJS-$(CONFIG_MP) += release.o
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
PLATFORM_CPPFLAGS += -ffixed-r2 -Wa,-me500 -msoft-float -mno-string
-# Enable gc-sections to enable generation of smaller images.
-PLATFORM_LDFLAGS += --gc-sections
-PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
-
# -mspe=yes is needed to have -mno-spe accepted by a buggy GCC;
# see "[PATCH,rs6000] make -mno-spe work as expected" on
# http://gcc.gnu.org/ml/gcc-patches/2008-04/msg00311.html
PLATFORM_CPPFLAGS +=$(call cc-option,-mspe=yes)
PLATFORM_CPPFLAGS +=$(call cc-option,-mno-spe)
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc85xx/u-boot.lds
if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
puts("already enabled");
l2srbar = l2cache->l2srbar0;
-#ifdef CONFIG_SYS_INIT_L2_ADDR
+#if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE)
if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
&& l2srbar >= CONFIG_SYS_FLASH_BASE) {
l2srbar = CONFIG_SYS_INIT_L2_ADDR;
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
-START = start.o
+SSTART = start.o
+CSTART = traps.o
SOBJS-y += cache.o
SOBJS-$(CONFIG_MP) += release.o
COBJS-y += interrupts.o
COBJS-$(CONFIG_MP) += mp.o
COBJS-y += speed.o
-COBJS-y += traps.o
SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-START := $(addprefix $(obj),$(START))
+START := $(addprefix $(obj),$(SSTART) $(CSTART))
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(ASOBJS) $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
PLATFORM_CPPFLAGS += -ffixed-r2 -mstring
PLATFORM_CPPFLAGS += -maltivec -mabi=altivec -msoft-float
-
-# Enable gc-sections to enable generation of smaller images.
-PLATFORM_LDFLAGS += --gc-sections
-PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc86xx/u-boot.lds
{
/* Read-only sections, merged into text segment: */
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc86xx/start.o (.text)
- arch/powerpc/cpu/mpc86xx/traps.o (.text)
- arch/powerpc/cpu/mpc86xx/interrupts.o (.text)
- arch/powerpc/cpu/mpc86xx/cpu_init.o (.text)
- arch/powerpc/cpu/mpc86xx/cpu.o (.text)
- arch/powerpc/cpu/mpc86xx/speed.o (.text)
- common/dlmalloc.o (.text)
- lib/crc32.o (.text)
- arch/powerpc/lib/extable.o (.text)
- lib/zlib.o (.text)
+ arch/powerpc/cpu/mpc86xx/start.o (.text*)
+ arch/powerpc/cpu/mpc86xx/traps.o (.text*)
*(.text*)
}
_etext = .;
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss*)
*(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
# CFLAGS += -DET_DEBUG
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
-START-y += start.o
-START-y += kgdb.o
+SSTART-y += start.o
+CSTART-y += traps.o
COBJS-y += bedbug_860.o
COBJS-y += commproc.o
COBJS-y += cpu.o
COBJS-y += serial.o
COBJS-y += speed.o
COBJS-y += spi.o
-COBJS-y += traps.o
COBJS-y += upatch.o
COBJS-y += video.o
+SOBJS-y += kgdb.o
SOBJS-y += plprcr_write.o
-SRCS := $(START-y:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+SRCS := $(SSTART-y:.o=.S) $(CSTART-y:.o=.c) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-START := $(addprefix $(obj),$(START-y))
+START := $(addprefix $(obj),$(SSTART-y) $(CSTART-y))
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(obj)kgdb.o
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2010
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
include $(TOPDIR)/config.mk
-LIB = $(obj)lib8xxx.a
+LIB = $(obj)lib8xxx.o
ifneq ($(CPU),mpc83xx)
COBJS-y += cpu.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
include $(SRCTREE)/rules.mk
include $(TOPDIR)/config.mk
-LIB = $(obj)libddr.a
+LIB = $(obj)libddr.o
COBJS-$(CONFIG_FSL_DDR1) += main.o util.o ctrl_regs.o options.o \
lc_common_dimm_params.o
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
include $(SRCTREE)/rules.mk
#include "ecc.h"
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
-
#define PPC4xx_IBM_DDR2_DUMP_REGISTER(mnemonic) \
do { \
u32 data; \
PPC4xx_IBM_DDR2_DUMP_REGISTER(RTSR);
#endif /* defined(DEBUG) */
}
-
-#endif /* CONFIG_SDRAM_PPC4xx_IBM_DDR2 */
#include "ecc.h"
-#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-
/*
* Only compile the DDR auto-calibration code for NOR boot and
* not for NAND boot (NAND SPL and NAND U-Boot - NUB)
return 0;
}
#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
-#endif /* defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START := resetvec.o
START += start.o
COBJS := 40x_spd_sdram.o
+ifndef CONFIG_NAND_SPL
+ifndef CONFIG_NAND_U_BOOT
COBJS += 44x_spd_ddr.o
-COBJS += 44x_spd_ddr2.o
-ifdef CONFIG_PPC4xx_DDR_AUTOCALIBRATION
-COBJS += 4xx_ibm_ddr2_autocalib.o
endif
+endif
+COBJS-$(CONFIG_SDRAM_PPC4xx_IBM_DDR2) += 44x_spd_ddr2.o
+COBJS-$(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) += 4xx_ibm_ddr2_autocalib.o
COBJS += 4xx_pci.o
COBJS += 4xx_pcie.o
COBJS += bedbug_405.o
-ifdef CONFIG_CMD_CHIP_CONFIG
-COBJS += cmd_chip_config.o
-endif
+COBJS-$(CONFIG_CMD_CHIP_CONFIG) += cmd_chip_config.o
COBJS += cpu.o
COBJS += cpu_init.o
COBJS += denali_data_eye.o
COBJS += denali_spd_ddr2.o
COBJS += ecc.o
-ifdef CONFIG_CMD_ECCTEST
-COBJS += cmd_ecctest.o
-endif
+COBJS-$(CONFIG_CMD_ECCTEST) += cmd_ecctest.o
COBJS += fdt.o
COBJS += interrupts.o
COBJS += iop480_uart.o
-ifdef CONFIG_CMD_REGINFO
-COBJS += reginfo.o
-endif
+COBJS-$(CONFIG_CMD_REGINFO) += reginfo.o
COBJS += sdram.o
COBJS += speed.o
COBJS += tlb.o
COBJS += usb.o
COBJS += usb_ohci.o
COBJS += usbdev.o
+COBJS-$(CONFIG_XILINX_440) += xilinx_irq.o
ifndef CONFIG_XILINX_440
COBJS += 4xx_uart.o
COBJS += gpio.o
COBJS += miiphy.o
COBJS += uic.o
-else
-COBJS += xilinx_irq.o
endif
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS) $(COBJS-y))
START := $(addprefix $(obj),$(START))
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
int error;
if (argc < 3) {
- cmd_usage(cmdtp);
- return 1;
+ return cmd_usage(cmdtp);
}
ptr = (u32 *)simple_strtoul(argv[1], NULL, 16);
error = simple_strtoul(argv[2], NULL, 16);
if ((error < 1) || (error > 2)) {
- cmd_usage(cmdtp);
- return 1;
+ return cmd_usage(cmdtp);
}
printf("Using address %p for %d bit ECC error injection\n",
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2010
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
else
PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405
endif
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/ppc4xx/u-boot.lds
relocate_code:
#if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS)
/*
- * We need to flush the initial global data (gd_t) before the dcache
- * will be invalidated.
+ * We need to flush the initial global data (gd_t) and bd_info
+ * before the dcache will be invalidated.
*/
/* Save registers */
mr r10, r4
mr r11, r5
- /* Flush initial global data range */
- mr r3, r4
- addi r4, r4, GENERATED_GBL_DATA_SIZE@l
- bl flush_dcache_range
+ /*
+ * Flush complete dcache, this is faster than flushing the
+ * ranges for global_data and bd_info instead.
+ */
+ bl flush_dcache
#if defined(CONFIG_SYS_INIT_DCACHE_CS)
/*
#endif
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
PHDRS
{
text PT_LOAD;
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- *(.text)
- *(.got1)
+ *(.text*)
} :text
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
} :text
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
.resetvec RESET_VECTOR_ADDRESS :
{
- *(.resetvec)
+ KEEP(*(.resetvec))
} :text = 0xffff
. = RESET_VECTOR_ADDRESS + 0x4;
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
} :bss
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).o
SOBJS-y += ppccache.o
SOBJS-y += ppcstring.o
echo " Upgrade to a recent toolchain."; \
exit 1; \
fi;
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
#endif
+#ifdef CONFIG_SYS_EXTRA_ENV_RELOC
+ /*
+ * Some systems need to relocate the env_addr pointer early because the
+ * location it points to will get invalidated before env_relocate is
+ * called. One example is on systems that might use a L2 or L3 cache
+ * in SRAM mode and initialize that cache from SRAM mode back to being
+ * a cache in cpu_init_r.
+ */
+ gd->env_addr += dest_addr - CONFIG_SYS_MONITOR_BASE;
+#endif
+
#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
#endif
*/
pci_init ();
#endif
-#if defined(CONFIG_BAB7xx)
+#if defined(CONFIG_WINBOND_83C553)
/*
* Initialise the ISA bridge
*/
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
SOBJS = start.o
COBJS = cpu.o interrupts.o watchdog.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
.align 2
.global _start
-_start:
+_sh_start:
.long 0x00000010 /* Ppower ON reset PC*/
.long 0x00000000
.long 0x00000010 /* Manual reset PC */
nop
1: sts pr, r5
mov.l ._reloc_dst, r4
- add #(_start-1b), r5
+ add #(_sh_start-1b), r5
mov.l ._reloc_dst_end, r6
2: mov.l @r5+, r1
._reloc_dst_end: .long reloc_dst_end
._bss_start: .long bss_start
._bss_end: .long bss_end
-._gd_init: .long (_start - GENERATED_GBL_DATA_SIZE)
-._stack_init: .long (_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
+._gd_init: .long (_sh_start - GENERATED_GBL_DATA_SIZE)
+._stack_init: .long (_sh_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
._sh_generic_init: .long sh_generic_init
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
SOBJS = start.o
COBJS = cpu.o interrupts.o watchdog.o cache.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
.align 2
.global _start
-_start:
+_sh_start:
mov.l ._lowlevel_init, r0
100: bsrf r0
nop
nop
1: sts pr, r5
mov.l ._reloc_dst, r4
- add #(_start-1b), r5
+ add #(_sh_start-1b), r5
mov.l ._reloc_dst_end, r6
2: mov.l @r5+, r1
._reloc_dst_end: .long reloc_dst_end
._bss_start: .long bss_start
._bss_end: .long bss_end
-._gd_init: .long (_start - GENERATED_GBL_DATA_SIZE)
-._stack_init: .long (_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
+._gd_init: .long (_sh_start - GENERATED_GBL_DATA_SIZE)
+._stack_init: .long (_sh_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
._sh_generic_init: .long sh_generic_init
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
SOBJS = start.o
COBJS = cpu.o interrupts.o watchdog.o cache.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
/*
- * (C) Copyright 2007
+ * (C) Copyright 2007, 2010
* Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*
* This program is free software; you can redistribute it and/or
.align 2
.global _start
-_start:
+_sh_start:
mov.l ._lowlevel_init, r0
100: bsrf r0
nop
nop
1: sts pr, r5
mov.l ._reloc_dst, r4
- add #(_start-1b), r5
+ add #(_sh_start-1b), r5
mov.l ._reloc_dst_end, r6
2: mov.l @r5+, r1
._reloc_dst_end: .long reloc_dst_end
._bss_start: .long bss_start
._bss_end: .long bss_end
-._gd_init: .long (_start - GENERATED_GBL_DATA_SIZE)
-._stack_init: .long (_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
+._gd_init: .long (_sh_start - GENERATED_GBL_DATA_SIZE)
+._stack_init: .long (_sh_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16)
._sh_generic_init: .long sh_generic_init
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).o
SOBJS-y +=
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
SOBJS =
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(CPU).a
+LIB = $(obj)lib$(CPU).o
START = start.o
SOBJS =
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).o
SOBJS =
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o cfm_flash.o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := cpux9k2.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- lib/string.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/extable.o (.text)
- arch/powerpc/lib/time.o (.text)
- arch/powerpc/lib/ticks.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ common/libcommon.o (.text*)
+ arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
+ board/LEOX/elpt860/libelpt860.o (.text*)
+ arch/powerpc/lib/libpowerpc.o (.text*)
+/* drivers/rtc/librtc.o (.text*) */
. = env_offset;
- common/env_embedded.o (.text)
+ common/env_embedded.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := edminiv2.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
SOBJS = ../common/misc.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- arch/powerpc/cpu/74xx_7xx/start.o (.text)
-
-/* store the environment in a seperate sector in the boot flash */
-/* . = env_offset; */
-/* common/env_embedded.o(.text) */
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
SOBJS = ../common/misc.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := guruplug.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := mv88f6281gtw_ge.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := openrd_base.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := rd6281a.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := sheevaplug.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o eccx.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
-/* XXX ?
- . = env_offset;
-*/
- common/env_embedded.o(.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
-/* XXX ?
- . = env_offset;
-*/
- common/env_embedded.o(.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
-/* XXX ?
- . = env_offset;
-*/
- common/env_embedded.o(.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
. = env_offset;
common/env_embedded.o (.ppcenv)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
+#
+# Based on sheevaplug/Makefile originally written by
+# Prafulla Wadaskar <prafulla@marvell.com>
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
#
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
-COBJS = $(BOARD).o flash.o
+COBJS := dockstar.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
#########################################################################
--- /dev/null
+/*
+ * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
+ *
+ * Based on sheevaplug.c originally written by
+ * Prafulla Wadaskar <prafulla@marvell.com>
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/mpp.h>
+#include "dockstar.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ /*
+ * default gpio configuration
+ * There are maximum 64 gpios controlled through 2 sets of registers
+ * the below configuration configures mainly initial LED status
+ */
+ kw_config_gpio(DOCKSTAR_OE_VAL_LOW,
+ DOCKSTAR_OE_VAL_HIGH,
+ DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH);
+
+ /* Multi-Purpose Pins Functionality configuration */
+ u32 kwmpp_config[] = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO,
+ MPP8_UART0_RTS,
+ MPP9_UART0_CTS,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_SD_CLK,
+ MPP13_SD_CMD,
+ MPP14_SD_D0,
+ MPP15_SD_D1,
+ MPP16_SD_D2,
+ MPP17_SD_D3,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_GPIO,
+ MPP21_GPIO,
+ MPP22_GPIO,
+ MPP23_GPIO,
+ MPP24_GPIO,
+ MPP25_GPIO,
+ MPP26_GPIO,
+ MPP27_GPIO,
+ MPP28_GPIO,
+ MPP29_TSMP9,
+ MPP30_GPIO,
+ MPP31_GPIO,
+ MPP32_GPIO,
+ MPP33_GPIO,
+ MPP34_GPIO,
+ MPP35_GPIO,
+ MPP36_GPIO,
+ MPP37_GPIO,
+ MPP38_GPIO,
+ MPP39_GPIO,
+ MPP40_GPIO,
+ MPP41_GPIO,
+ MPP42_GPIO,
+ MPP43_GPIO,
+ MPP44_GPIO,
+ MPP45_GPIO,
+ MPP46_GPIO,
+ MPP47_GPIO,
+ MPP48_GPIO,
+ MPP49_GPIO,
+ 0
+ };
+ kirkwood_mpp_conf(kwmpp_config);
+ return 0;
+}
+
+int board_init(void)
+{
+ /*
+ * arch number of board
+ */
+ gd->bd->bi_arch_number = MACH_TYPE_DOCKSTAR;
+
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+/* Configure and enable MV88E1116 PHY */
+void reset_phy(void)
+{
+ u16 reg;
+ u16 devadr;
+ char *name = "egiga0";
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /* command to read PHY dev address */
+ if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
+ printf("Err..%s could not read PHY dev address\n",
+ __FUNCTION__);
+ return;
+ }
+
+ /*
+ * Enable RGMII delay on Tx and Rx for CPU port
+ * Ref: sec 4.7.2 of chip datasheet
+ */
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
+ miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®);
+ reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
+ miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
+
+ /* reset the phy */
+ miiphy_reset(name, devadr);
+
+ printf("88E1116 Initialized on %s\n", name);
+}
+#endif /* CONFIG_RESET_PHY_R */
+
+#define GREEN_LED (1 << 14)
+#define ORANGE_LED (1 << 15)
+#define BOTH_LEDS (GREEN_LED | ORANGE_LED)
+#define NEITHER_LED 0
+
+static void set_leds(u32 leds, u32 blinking)
+{
+ struct kwgpio_registers *r = (struct kwgpio_registers *)KW_GPIO1_BASE;
+ u32 oe = readl(&r->oe) | BOTH_LEDS;
+ writel(oe & ~leds, &r->oe); /* active low */
+ u32 bl = readl(&r->blink_en) & ~BOTH_LEDS;
+ writel(bl | blinking, &r->blink_en);
+}
+
+void show_boot_progress(int val)
+{
+ switch (val) {
+ case 15: /* booting Linux */
+ set_leds(BOTH_LEDS, NEITHER_LED);
+ break;
+ case 64: /* Ethernet initialization */
+ set_leds(GREEN_LED, GREEN_LED);
+ break;
+ default:
+ if (val < 0) /* error */
+ set_leds(ORANGE_LED, ORANGE_LED);
+ break;
+ }
+}
--- /dev/null
+/*
+ * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
+ *
+ * Based on sheevaplug.h originally written by
+ * Prafulla Wadaskar <prafulla@marvell.com>
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __DOCKSTAR_H
+#define __DOCKSTAR_H
+
+#define DOCKSTAR_OE_LOW (~(0))
+#define DOCKSTAR_OE_HIGH (~(0))
+#define DOCKSTAR_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
+#define DOCKSTAR_OE_VAL_HIGH (1 << 17) /* LED pin high */
+
+/* PHY related */
+#define MV88E1116_LED_FCTRL_REG 10
+#define MV88E1116_CPRSP_CR3_REG 21
+#define MV88E1116_MAC_CTRL_REG 21
+#define MV88E1116_PGADR_REG 22
+#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
+#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
+
+#endif /* __DOCKSTAR_H */
--- /dev/null
+#
+# Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
+#
+# Based on sheevaplug/kwbimage.cfg originally written by
+# Prafulla Wadaskar <prafulla@marvell.com>
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.kwimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM nand
+NAND_ECC_MODE default
+NAND_PAGE_SIZE 0x0800
+
+# SOC registers configuration using bootrom header extension
+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
+
+# Configure RGMII-0 interface pad voltage to 1.8V
+DATA 0xFFD100e0 0x1b1b1b9b
+
+#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+DATA 0xFFD01400 0x43000c30 # DDR Configuration register
+# bit13-0: 0xc30 (3120 DDR2 clks refresh rate)
+# bit23-14: zero
+# bit24: 1= enable exit self refresh mode on DDR access
+# bit25: 1 required
+# bit29-26: zero
+# bit31-30: 01
+
+DATA 0xFFD01404 0x37543000 # DDR Controller Control Low
+# bit 4: 0=addr/cmd in smame cycle
+# bit 5: 0=clk is driven during self refresh, we don't care for APX
+# bit 6: 0=use recommended falling edge of clk for addr/cmd
+# bit14: 0=input buffer always powered up
+# bit18: 1=cpu lock transaction enabled
+# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
+# bit30-28: 3 required
+# bit31: 0=no additional STARTBURST delay
+
+DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
+# bit3-0: TRAS lsbs
+# bit7-4: TRCD
+# bit11- 8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20: TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xFFD0140C 0x00000a33 # DDR Timing (High)
+# bit6-0: TRFC
+# bit8-7: TR2R
+# bit10-9: TR2W
+# bit12-11: TW2W
+# bit31-13: zero required
+
+DATA 0xFFD01410 0x0000000d # DDR Address Control
+# bit1-0: 00, Cs0width=x8
+# bit3-2: 11, Cs0size=1Gb
+# bit5-4: 00, Cs1width=nonexistent
+# bit7-6: 00, Cs1size =nonexistent
+# bit9-8: 00, Cs2width=nonexistent
+# bit11-10: 00, Cs2size =nonexistent
+# bit13-12: 00, Cs3width=nonexistent
+# bit15-14: 00, Cs3size =nonexistent
+# bit16: 0, Cs0AddrSel
+# bit17: 0, Cs1AddrSel
+# bit18: 0, Cs2AddrSel
+# bit19: 0, Cs3AddrSel
+# bit31-20: 0 required
+
+DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
+# bit0: 0, OpenPage enabled
+# bit31-1: 0 required
+
+DATA 0xFFD01418 0x00000000 # DDR Operation
+# bit3-0: 0x0, DDR cmd
+# bit31-4: 0 required
+
+DATA 0xFFD0141C 0x00000C52 # DDR Mode
+# bit2-0: 2, BurstLen=2 required
+# bit3: 0, BurstType=0 required
+# bit6-4: 4, CL=5
+# bit7: 0, TestMode=0 normal
+# bit8: 0, DLL reset=0 normal
+# bit11-9: 6, auto-precharge write recovery ????????????
+# bit12: 0, PD must be zero
+# bit31-13: 0 required
+
+DATA 0xFFD01420 0x00000040 # DDR Extended Mode
+# bit0: 0, DDR DLL enabled
+# bit1: 0, DDR drive strenght normal
+# bit2: 0, DDR ODT control lsd (disabled)
+# bit5-3: 000, required
+# bit6: 1, DDR ODT control msb, (disabled)
+# bit9-7: 000, required
+# bit10: 0, differential DQS enabled
+# bit11: 0, required
+# bit12: 0, DDR output buffer enabled
+# bit31-13: 0 required
+
+DATA 0xFFD01424 0x0000F17F # DDR Controller Control High
+# bit2-0: 111, required
+# bit3 : 1 , MBUS Burst Chop disabled
+# bit6-4: 111, required
+# bit7 : 0
+# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz
+# bit9 : 0 , no half clock cycle addition to dataout
+# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 1111 required
+# bit31-16: 0 required
+
+DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values)
+DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values)
+
+DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0
+DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size
+# bit0: 1, Window enabled
+# bit1: 0, Write Protect disabled
+# bit3-2: 00, CS0 hit selected
+# bit23-4: ones, required
+# bit31-24: 0x07, Size (i.e. 128MB)
+
+DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb
+DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled
+
+DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
+DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
+
+DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low)
+DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
+# bit1-0: 00, ODT0 controlled by ODT Control (low) register above
+# bit3-2: 01, ODT1 active NEVER!
+# bit31-4: zero, required
+
+DATA 0xFFD0149C 0x0000E803 # CPU ODT Control
+DATA 0xFFD01480 0x00000001 # DDR Initialization Control
+#bit0=1, enable DDR init upon this register write
+
+# End of Header extension
+DATA 0x0 0x0
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := actux1.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
CONFIG_SYS_TEXT_BASE = 0x00e00000
# include NPE ethernet driver
-BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a
+BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o
LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := actux2.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
CONFIG_SYS_TEXT_BASE = 0x00e00000
# include NPE ethernet driver
-BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a
+BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o
LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := actux3.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
CONFIG_SYS_TEXT_BASE = 0x00e00000
# include NPE ethernet driver
-BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a
+BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o
LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := actux4.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
CONFIG_SYS_TEXT_BASE = 0x00e00000
# include NPE ethernet driver
-BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a
+BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- *(.text)
- *(.got1)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ *(.text*)
. = ALIGN(16);
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += afeb9260.o
COBJS-y += partition.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_CMD_IDE) += ../common/cfide.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o cmd_acadia.o memory.o pll.o
SOBJS =
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS = init.o
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text*)
+ board/amcc/bamboo/init.o (.text*)
/* Align to next NAND block */
. = ALIGN(0x4000);
/* Keep some space here for redundant env and potential bad env blocks */
. = ALIGN(0x10000);
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := init.o
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
}
#endif /* !defined(CONFIG_ARCHES) */
-#if defined(CONFIG_NAND_U_BOOT)
-/*
- * NAND booting U-Boot version uses a fixed initialization, since the whole
- * I2C SPD DIMM autodetection/calibration doesn't fit into the 4k of boot
- * code.
- */
-phys_size_t initdram(int board_type)
-{
- return CONFIG_SYS_MBYTES_SDRAM << 20;
-}
-#endif
-
#if defined(CONFIG_PCI)
int board_pcie_first(void)
{
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
arch/powerpc/cpu/ppc4xx/start.o (.text)
+ board/amcc/canyonlands/init.o (.text*)
/* Align to next NAND block */
. = ALIGN(0x20000);
/* Keep some space here for redundant env and potential bad env blocks */
. = ALIGN(0x80000);
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o cmd_pll.o
SOBJS = init.o
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y = $(BOARD).o sdram.o
COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
arch/powerpc/cpu/ppc4xx/start.o (.text)
+ board/amcc/sequoia/init.o (.text*)
/* Align to next NAND block */
. = ALIGN(0x4000);
/* Keep some space here for redundant env and potential bad env blocks */
. = ALIGN(0x10000);
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text*)
+ board/amcc/sequoia/init.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o lcd.o update.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o lcd.o update.o showinfo.o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o cmd_yucca.o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o serial.o pci.o powerspan.o
SOBJS = init.o
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $^
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
arch/powerpc/cpu/ppc4xx/start.o (.text)
- board/amirix/ap1000/init.o (.text)
- arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
- arch/powerpc/cpu/ppc4xx/traps.o (.text)
- arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
- arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
- arch/powerpc/cpu/ppc4xx/speed.o (.text)
- common/dlmalloc.o (.text)
- lib/crc32.o (.text)
- arch/powerpc/lib/extable.o (.text)
- lib/zlib.o (.text)
-
-/* . = env_offset;*/
-/* common/env_embedded.o(.text)*/
-
- *(.text)
- *(.got1)
+ board/amirix/ap1000/init.o (.text)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := apollon.o mem.o sys_info.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := armadillo.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
SOBJS-y := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(COBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(COBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(COBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(COBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := versatile.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := ca9x4_ct_vxp.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
int dram_init(void)
{
- gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE);
+ gd->ram_size =
+ get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+ gd->bd->bi_dram[0].size =
+ get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = get_ram_size(PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
+ gd->bd->bi_dram[1].size =
+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
}
int timer_init(void)
* Delay x useconds AND perserve advance timstamp value
* assumes timer is ticking at 1 msec
*/
-void udelay(ulong usec)
+void __udelay(ulong usec)
{
ulong tmo, tmp;
#
# Linux-Kernel is expected to be at 0x60008000
#
-TEXT_BASE = 0x60800000
-LDSCRIPT := $(SRCTREE)/board/armltd/vexpress/u-boot.lds
+CONFIG_SYS_TEXT_BASE = 0x60800000
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
- . = ALIGN(4);
- .text :
- {
- arch/arm/cpu/armv7/start.o (.text)
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata))) }
-
- . = ALIGN(4);
- .data : { *(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
- }
-
- __got_start = .;
- . = ALIGN(4);
- .got : { *(.got) }
- __got_end = .;
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = ALIGN(4);
- __bss_start = .;
- .bss : { *(.bss) }
- _end = .;
-}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := assabet.o
SOBJS := setup.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o fpga.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o ti113x.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*====================================================================*/
-int i82365_init (void)
+static int i82365_init (void)
{
u_int val;
int i;
return 0;
}
-void i82365_exit (void)
+static void i82365_exit (void)
{
io.map = 0;
io.flags = 0;
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += at91cap9adk.o
COBJS-y += led.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += led.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
+++ /dev/null
-# currently only NOR flash booting is supported
-CONFIG_SYS_TEXT_BASE = 0x10000000
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += at91sam9260ek.o
COBJS-y += led.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += at91sam9261ek.o
COBJS-y += led.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += at91sam9263ek.o
COBJS-y += led.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += at91sam9m10g45ek.o
COBJS-y += led.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += at91sam9rlek.o
COBJS-y += led.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB := $(obj)lib$(BOARD).a
+LIB := $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)lib$(BOARD).a
+LIB := $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += flash.o
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += law.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := balloon3.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
+++ /dev/null
-This port of U-Boot is tuned to run on a range of Barco Control Rooms
-Streaming Video Solutions, including:
-
- - Streaming Video Card (SVC)
- - Sample Compress Network (SCN)
-
-For more information, see http://www.barcocontrolrooms.com/
-
-Code and configuration are originally based on the Sandpoint board
-
-Marc Leeman <marc.leeman@barco.com>
+++ /dev/null
-/********************************************************************
- *
- * Unless otherwise specified, Copyright (C) 2004-2005 Barco Control Rooms
- *
- * $Source: /home/services/cvs/firmware/ppc/u-boot-1.1.2/board/barco/barco.c,v $
- * $Revision: 1.4 $
- * $Author: mleeman $
- * $Date: 2005/03/02 16:40:20 $
- *
- * Last ChangeLog Entry
- * $Log: barco.c,v $
- * Revision 1.4 2005/03/02 16:40:20 mleeman
- * remove empty labels (3.4 complains)
- *
- * Revision 1.3 2005/02/21 12:48:58 mleeman
- * update of copyright years (feedback wd)
- *
- * Revision 1.2 2005/02/21 10:10:53 mleeman
- * - split up switch statement to a function call (Linux kernel coding guidelines)
- * ( feedback wd)
- *
- * Revision 1.1 2005/02/14 09:31:07 mleeman
- * renaming of files
- *
- * Revision 1.1 2005/02/14 09:23:46 mleeman
- * - moved 'barcohydra' directory to a more generic barco; since we will be
- * supporting and adding multiple boards
- *
- * Revision 1.3 2005/02/10 13:57:32 mleeman
- * fixed flash corruption: I should exit from the moment I find the correct value
- *
- * Revision 1.2 2005/02/09 12:56:23 mleeman
- * add generic header to track changes in sources
- *
- *
- *******************************************************************/
-
-/*
- * (C) Copyright 2004
- * Marc Leeman <marc.leeman@barco.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <pci.h>
-#include <malloc.h>
-#include <command.h>
-
-#include "config.h"
-#include "barco_svc.h"
-
-#define TRY_WORKING (3)
-#define BOOT_DEFAULT (2)
-#define BOOT_WORKING (1)
-
-int checkboard (void)
-{
- /*TODO: Check processor type */
-
- puts ( "Board: Streaming Video Card for Hydra systems "
-#ifdef CONFIG_MPC8240
- "8240"
-#endif
-#ifdef CONFIG_MPC8245
- "8245"
-#endif
- " Unity ##Test not implemented yet##\n");
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- long size;
- long new_bank0_end;
- long mear1;
- long emear1;
-
- size = get_ram_size (CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
-
- new_bank0_end = size - 1;
- mear1 = mpc824x_mpc107_getreg (MEAR1);
- emear1 = mpc824x_mpc107_getreg (EMEAR1);
- mear1 = (mear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
- emear1 = (emear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
- mpc824x_mpc107_setreg (MEAR1, mear1);
- mpc824x_mpc107_setreg (EMEAR1, emear1);
-
- return (size);
-}
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_barcohydra_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER } },
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
- PCI_ENET1_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER } },
- { }
-};
-#endif
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table: pci_barcohydra_config_table,
-#endif
-};
-
-void pci_init_board (void)
-{
- pci_mpc824x_init (&hose);
-}
-
-int write_flash (char *addr, char value)
-{
- char *adr = (char *)0xFF800000;
- int cnt = 0;
- char status,oldstatus;
-
- *(adr+0x55) = 0xAA; udelay (1);
- *(adr+0xAA) = 0x55; udelay (1);
- *(adr+0x55) = 0xA0; udelay (1);
- *addr = value;
-
- status = *addr;
- do {
- oldstatus = status;
- status = *addr;
-
- if ((oldstatus & 0x40) == (status & 0x40)) {
- return 4;
- }
- cnt++;
- if (cnt > 10000) {
- return 2;
- }
- } while ( (status & 0x20) == 0 );
-
- oldstatus = *addr;
- status = *addr;
-
- if ((oldstatus & 0x40) == (status & 0x40)) {
- return 0;
- } else {
- *(adr+0x55) = 0xF0;
- return 1;
- }
-}
-
-unsigned update_flash (unsigned char *buf)
-{
- switch ((*buf) & 0x3) {
- case TRY_WORKING:
- printf ("found 3 and converted it to 2\n");
- write_flash ((char *)buf, (*buf) & 0xFE);
- *((unsigned char *)0xFF800000) = 0xF0;
- udelay (100);
- printf ("buf [%#010x] %#010x\n", (unsigned)buf, (*buf));
- /* XXX - fall through??? */
- case BOOT_WORKING :
- return BOOT_WORKING;
- }
- return BOOT_DEFAULT;
-}
-
-unsigned scan_flash (void)
-{
- char section[] = "kernel";
- int cfgFileLen = (CONFIG_SYS_FLASH_ERASE_SECTOR_LENGTH >> 1);
- int sectionPtr = 0;
- int foundItem = 0; /* 0: None, 1: section found, 2: "=" found */
- int bufPtr;
- unsigned char *buf;
-
- buf = (unsigned char*)(CONFIG_SYS_FLASH_RANGE_BASE + CONFIG_SYS_FLASH_RANGE_SIZE \
- - CONFIG_SYS_FLASH_ERASE_SECTOR_LENGTH);
- for (bufPtr = 0; bufPtr < cfgFileLen; ++bufPtr) {
- if ((buf[bufPtr]==0xFF) && (*(int*)(buf+bufPtr)==0xFFFFFFFF)) {
- return BOOT_DEFAULT;
- }
- /* This is the scanning loop, we try to find a particular
- * quoted value
- */
- switch (foundItem) {
- case 0:
- if ((section[sectionPtr] == 0)) {
- ++foundItem;
- } else if (buf[bufPtr] == section[sectionPtr]) {
- ++sectionPtr;
- } else {
- sectionPtr = 0;
- }
- break;
- case 1:
- ++foundItem;
- break;
- case 2:
- ++foundItem;
- break;
- case 3:
- default:
- return update_flash (&buf[bufPtr - 1]);
- }
- }
-
- printf ("Failed to read %s\n",section);
- return BOOT_DEFAULT;
-}
-
-TSBootInfo* find_boot_info (void)
-{
- unsigned bootimage = scan_flash ();
- TSBootInfo* info = (TSBootInfo*)malloc (sizeof(TSBootInfo));
-
- switch (bootimage) {
- case TRY_WORKING:
- info->address = CONFIG_SYS_WORKING_KERNEL_ADDRESS;
- break;
- case BOOT_WORKING :
- info->address = CONFIG_SYS_WORKING_KERNEL_ADDRESS;
- break;
- case BOOT_DEFAULT:
- default:
- info->address= CONFIG_SYS_DEFAULT_KERNEL_ADDRESS;
-
- }
- info->size = *((unsigned int *)(info->address ));
-
- return info;
-}
-
-void barcobcd_boot (void)
-{
- TSBootInfo* start;
- char *bootm_args[2];
- char *buf;
- int cnt;
- extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
-
- buf = (char *)(0x00800000);
- /* make certain there are enough chars to print the command line here!
- */
- bootm_args[0] = (char *)malloc (16*sizeof(char));
- bootm_args[1] = (char *)malloc (16*sizeof(char));
-
- start = find_boot_info ();
-
- printf ("Booting kernel at address %#10x with size %#10x\n",
- start->address, start->size);
-
- /* give length of the kernel image to bootm */
- sprintf (bootm_args[0],"%x",start->size);
- /* give address of the kernel image to bootm */
- sprintf (bootm_args[1],"%x",(unsigned)buf);
-
- printf ("flash address: %#10x\n",start->address+8);
- printf ("buf address: %#10x\n",(unsigned)buf);
-
- /* aha, we reserve 8 bytes here... */
- for (cnt = 0; cnt < start->size ; cnt++) {
- buf[cnt] = ((char *)start->address)[cnt+8];
- }
-
- /* initialise RAM memory */
- *((unsigned int *)0xFEC00000) = 0x00141A98;
- do_bootm (NULL,0,2,bootm_args);
-}
-
-int barcobcd_boot_image (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- barcobcd_boot ();
-
- return 0;
-}
-
-/* Currently, boot_working and boot_default are the same command. This is
- * left in here to see what we'll do in the future */
-
-U_BOOT_CMD (
- try_working, 1, 1, barcobcd_boot_image,
- "check flash value and boot the appropriate image",
- ""
- );
-
-U_BOOT_CMD (
- boot_working, 1, 1, barcobcd_boot_image,
- "check flash value and boot the appropriate image",
- ""
- );
-
-U_BOOT_CMD (
- boot_default, 1, 1, barcobcd_boot_image,
- "check flash value and boot the appropriate image",
- ""
- );
-/*
- * We are not using serial communication, so just provide empty functions
- */
-int serial_init (void)
-{
- return 0;
-}
-void serial_setbrg (void)
-{
- return;
-}
-void serial_putc (const char c)
-{
- return;
-}
-void serial_puts (const char *c)
-{
- return;
-}
-int serial_getc (void)
-{
- return 0;
-}
-int serial_tstc (void)
-{
- return 0;
-}
+++ /dev/null
-/********************************************************************
- *
- * Unless otherwise specified, Copyright (C) 2004-2005 Barco Control Rooms
- *
- * $Source: /home/services/cvs/firmware/ppc/u-boot-1.1.2/board/barco/barco_svc.h,v $
- * $Revision: 1.2 $
- * $Author: mleeman $
- * $Date: 2005/02/21 12:48:58 $
- *
- * Last ChangeLog Entry
- * $Log: barco_svc.h,v $
- * Revision 1.2 2005/02/21 12:48:58 mleeman
- * update of copyright years (feedback wd)
- *
- * Revision 1.1 2005/02/14 09:31:07 mleeman
- * renaming of files
- *
- * Revision 1.1 2005/02/14 09:23:46 mleeman
- * - moved 'barcohydra' directory to a more generic barco; since we will be
- * supporting and adding multiple boards
- *
- * Revision 1.1 2005/02/08 15:40:19 mleeman
- * modified and added platform files
- *
- * Revision 1.2 2005/01/25 08:05:04 mleeman
- * more cleanup of the code
- *
- * Revision 1.1 2004/07/20 08:49:55 mleeman
- * Working version of the default and nfs kernel booting.
- *
- *
- *******************************************************************/
-
-#ifndef _LOCAL_BARCOHYDRA_H_
-#define _LOCAL_BARCOHYDRA_H_
-
-#include <flash.h>
-#include <asm/io.h>
-
-/* Defines for the barcohydra board */
-#ifndef CONFIG_SYS_FLASH_ERASE_SECTOR_LENGTH
-#define CONFIG_SYS_FLASH_ERASE_SECTOR_LENGTH (0x10000)
-#endif
-
-#ifndef CONFIG_SYS_DEFAULT_KERNEL_ADDRESS
-#define CONFIG_SYS_DEFAULT_KERNEL_ADDRESS (CONFIG_SYS_FLASH_BASE + 0x30000)
-#endif
-
-#ifndef CONFIG_SYS_WORKING_KERNEL_ADDRESS
-#define CONFIG_SYS_WORKING_KERNEL_ADDRESS (0xFFE00000)
-#endif
-
-
-typedef struct SBootInfo {
- unsigned int address;
- unsigned int size;
- unsigned char state;
-}TSBootInfo;
-
-/* barcohydra.c */
-int checkboard(void);
-phys_size_t initdram(int board_type);
-void pci_init_board(void);
-void check_flash(void);
-int write_flash(char *addr, char value);
-TSBootInfo* find_boot_info(void);
-void final_boot(void);
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Thomas Koeller, tkoeller@gmx.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASSEMBLY__
-#define __ASSEMBLY__ 1
-#endif
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <asm/processor.h>
-#include <mpc824x.h>
-#include <ppc_asm.tmpl>
-
-#if defined(USE_DINK32)
- /* We are running from RAM, so do not clear the MCCR1_MEMGO bit! */
- #define MCCR1VAL ((CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT) | MCCR1_MEMGO)
-#else
- #define MCCR1VAL (CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT)
-#endif
-
- .text
-
- /* Values to program into memory controller registers */
-tbl: .long MCCR1, MCCR1VAL
- .long MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT
- .long MCCR3
- .long (((CONFIG_SYS_BSTOPRE & 0x000000f0) >> 4) << MCCR3_BSTOPRE2TO5_SHIFT) | \
- (CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT) | \
- (CONFIG_SYS_RDLAT << MCCR3_RDLAT_SHIFT)
- .long MCCR4
- .long (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) | (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | \
- (CONFIG_SYS_REGISTERD_TYPE_BUFFER << 20) | \
- (((CONFIG_SYS_BSTOPRE & 0x00000300) >> 8) << MCCR4_BSTOPRE0TO1_SHIFT ) | \
- ((CONFIG_SYS_SDMODE_CAS_LAT << 4) | (CONFIG_SYS_SDMODE_WRAP << 3) | \
- (CONFIG_SYS_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) | \
- (CONFIG_SYS_ACTTORW << MCCR4_ACTTORW_SHIFT) | \
- ((CONFIG_SYS_BSTOPRE & 0x0000000f) << MCCR4_BSTOPRE6TO9_SHIFT )
- .long MSAR1
- .long (((CONFIG_SYS_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 0) | \
- (((CONFIG_SYS_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | \
- (((CONFIG_SYS_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
- (((CONFIG_SYS_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
- .long EMSAR1
- .long (((CONFIG_SYS_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 0) | \
- (((CONFIG_SYS_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | \
- (((CONFIG_SYS_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
- (((CONFIG_SYS_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
- .long MSAR2
- .long (((CONFIG_SYS_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 0) | \
- (((CONFIG_SYS_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | \
- (((CONFIG_SYS_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
- (((CONFIG_SYS_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
- .long EMSAR2
- .long (((CONFIG_SYS_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 0) | \
- (((CONFIG_SYS_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | \
- (((CONFIG_SYS_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
- (((CONFIG_SYS_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
- .long MEAR1
- .long (((CONFIG_SYS_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 0) | \
- (((CONFIG_SYS_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | \
- (((CONFIG_SYS_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
- (((CONFIG_SYS_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
- .long EMEAR1
- .long (((CONFIG_SYS_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 0) | \
- (((CONFIG_SYS_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | \
- (((CONFIG_SYS_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
- (((CONFIG_SYS_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
- .long MEAR2
- .long (((CONFIG_SYS_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 0) | \
- (((CONFIG_SYS_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) | \
- (((CONFIG_SYS_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
- (((CONFIG_SYS_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
- .long EMEAR2
- .long (((CONFIG_SYS_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 0) | \
- (((CONFIG_SYS_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) | \
- (((CONFIG_SYS_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
- (((CONFIG_SYS_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
- .long 0
-
-
- /*
- * Early CPU initialization. Set up memory controller, so we can access any RAM at all. This
- * must be done in assembly, since we have no stack at this point.
- */
- .global early_init_f
-early_init_f:
- mflr r10
-
- /* basic memory controller configuration */
- lis r3, CONFIG_ADDR_HIGH
- lis r4, CONFIG_DATA_HIGH
- bl lab
-lab: mflr r5
- lwzu r0, tbl - lab(r5)
-loop: lwz r1, 4(r5)
- stwbrx r0, 0, r3
- eieio
- stwbrx r1, 0, r4
- eieio
- lwzu r0, 8(r5)
- cmpli cr0, 0, r0, 0
- bne cr0, loop
-
- /* set bank enable bits */
- lis r0, MBER@h
- ori r0, 0, MBER@l
- li r1, CONFIG_SYS_BANK_ENABLE
- stwbrx r0, 0, r3
- eieio
- stb r1, 0(r4)
- eieio
-
- /* delay loop */
- lis r0, 0x0003
- mtctr r0
-delay: bdnz delay
-
- /* enable memory controller */
- lis r0, MCCR1@h
- ori r0, 0, MCCR1@l
- stwbrx r0, 0, r3
- eieio
- lwbrx r0, 0, r4
- oris r0, 0, MCCR1_MEMGO@h
- stwbrx r0, 0, r4
- eieio
-
- /* set up stack pointer */
- lis r1, CONFIG_SYS_INIT_SP_OFFSET@h
- ori r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
-
- mtlr r10
- blr
+++ /dev/null
-/********************************************************************
- *
- * Unless otherwise specified, Copyright (C) 2004-2005 Barco Control Rooms
- *
- * $Source: /home/services/cvs/firmware/ppc/u-boot-1.1.2/board/barco/flash.c,v $
- * $Revision: 1.3 $
- * $Author: mleeman $
- * $Date: 2005/02/21 12:48:58 $
- *
- * Last ChangeLog Entry
- * $Log: flash.c,v $
- * Revision 1.3 2005/02/21 12:48:58 mleeman
- * update of copyright years (feedback wd)
- *
- * Revision 1.2 2005/02/21 11:04:04 mleeman
- * remove dead code and Coding style (feedback wd)
- *
- * Revision 1.1 2005/02/14 09:23:46 mleeman
- * - moved 'barcohydra' directory to a more generic barco; since we will be
- * supporting and adding multiple boards
- *
- * Revision 1.2 2005/02/09 12:56:23 mleeman
- * add generic header to track changes in sources
- *
- *
- *******************************************************************/
-
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <flash.h>
-
-#define ROM_CS0_START 0xFF800000
-#define ROM_CS1_START 0xFF000000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-/*flash command address offsets*/
-
-#define ADDR0 (0xAAA)
-#define ADDR1 (0x555)
-#define ADDR3 (0x001)
-
-#define FLASH_WORD_SIZE unsigned char
-
-/*-----------------------------------------------------------------------
- */
-
-static unsigned long flash_id(unsigned char mfct, unsigned char chip) __attribute__ ((const));
-
-typedef struct{
- FLASH_WORD_SIZE extval;
- unsigned short intval;
-} map_entry;
-
-static unsigned long flash_id(unsigned char mfct, unsigned char chip)
-{
- static const map_entry mfct_map[] = {
- {(FLASH_WORD_SIZE) AMD_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_AMD >> 16)},
- {(FLASH_WORD_SIZE) FUJ_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_FUJ >> 16)},
- {(FLASH_WORD_SIZE) STM_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_STM >> 16)},
- {(FLASH_WORD_SIZE) MT_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_MT >> 16)},
- {(FLASH_WORD_SIZE) INTEL_MANUFACT,(unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)},
- {(FLASH_WORD_SIZE) INTEL_ALT_MANU,(unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)}
- };
-
- static const map_entry chip_map[] = {
- {AMD_ID_F040B, FLASH_AM040},
- {AMD_ID_F033C, FLASH_AM033},
- {AMD_ID_F065D, FLASH_AM065},
- {ATM_ID_LV040, FLASH_AT040},
- {(FLASH_WORD_SIZE) STM_ID_x800AB, FLASH_STM800AB}
- };
-
- const map_entry *p;
- unsigned long result = FLASH_UNKNOWN;
-
- /* find chip id */
- for(p = &chip_map[0]; p < &chip_map[sizeof chip_map / sizeof chip_map[0]]; p++){
- if(p->extval == chip){
- result = FLASH_VENDMASK | p->intval;
- break;
- }
- }
-
- /* find vendor id */
- for(p = &mfct_map[0]; p < &mfct_map[sizeof mfct_map / sizeof mfct_map[0]]; p++){
- if(p->extval == mfct){
- result &= ~FLASH_VENDMASK;
- result |= (unsigned long) p->intval << 16;
- break;
- }
- }
-
- return result;
-}
-
-
-unsigned long flash_init(void)
-{
- unsigned long i;
- unsigned char j;
- static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++){
- flash_info_t * const pflinfo = &flash_info[i];
- pflinfo->flash_id = FLASH_UNKNOWN;
- pflinfo->size = 0;
- pflinfo->sector_count = 0;
- }
-
- /* Enable writes to Hydra/Argus flash */
- {
- register unsigned int temp;
- CONFIG_READ_WORD(PICR1,temp);
- temp |= PICR1_FLASH_WR_EN;
- CONFIG_WRITE_WORD(PICR1,temp);
- }
-
- for(i = 0; i < sizeof flash_banks / sizeof flash_banks[0]; i++){
- flash_info_t * const pflinfo = &flash_info[i];
- const unsigned long base_address = flash_banks[i];
- volatile FLASH_WORD_SIZE * const flash = (FLASH_WORD_SIZE *) base_address;
-
- /* write autoselect sequence */
- flash[0x5555] = 0xaa;
- flash[0x2aaa] = 0x55;
- flash[0x5555] = 0x90;
- __asm__ __volatile__("sync");
-
- pflinfo->flash_id = flash_id(flash[0x0], flash[0x1]);
-
- switch(pflinfo->flash_id & FLASH_TYPEMASK){
- case FLASH_AM033:
- pflinfo->size = 0x00200000;
- pflinfo->sector_count = 64;
- for(j = 0; j < 64; j++){
- pflinfo->start[j] = base_address + 0x00010000 * j;
- pflinfo->protect[j] = flash[(j << 16) | 0x2];
- }
- break;
- case FLASH_AM065:
- pflinfo->size = 0x00800000;
- pflinfo->sector_count =128;
- for(j = 0; j < 128; j++){
- pflinfo->start[j] = base_address + 0x00010000 * j;
- pflinfo->protect[j] = flash[(j << 16) | 0x2];
- }
- break;
- case FLASH_AT040:
- pflinfo->size = 0x00080000;
- pflinfo->sector_count = 2;
- pflinfo->start[0] = base_address ;
- pflinfo->start[1] = base_address + 0x00004000;
- pflinfo->protect[0] = ((flash[0x02] & 0X01)==0) ? 0X02 : 0X01;
- pflinfo->protect[1] = 0X02;
- break;
- case FLASH_AM040:
- pflinfo->size = 0x00080000;
- pflinfo->sector_count = 8;
- for(j = 0; j < 8; j++){
- pflinfo->start[j] = base_address + 0x00010000 * j;
- pflinfo->protect[j] = flash[(j << 16) | 0x2];
- }
- break;
- case FLASH_STM800AB:
- pflinfo->size = 0x00100000;
- pflinfo->sector_count = 19;
- pflinfo->start[0] = base_address;
- pflinfo->start[1] = base_address + 0x4000;
- pflinfo->start[2] = base_address + 0x6000;
- pflinfo->start[3] = base_address + 0x8000;
- for(j = 1; j < 16; j++){
- pflinfo->start[j+3] = base_address + 0x00010000 * j;
- }
- break;
- }
- /* Protect monitor and environment sectors */
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[0]);
-#endif
-
- /* reset device to read mode */
- flash[0x0000] = 0xf0;
- __asm__ __volatile__("sync");
- }
-
- return flash_info[0].size + flash_info[1].size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t *info)
-{
- static const char unk[] = "Unknown";
- const char *mfct = unk, *type = unk;
- unsigned int i;
-
- if(info->flash_id != FLASH_UNKNOWN){
- switch(info->flash_id & FLASH_VENDMASK){
- case FLASH_MAN_ATM:
- mfct = "Atmel";
- break;
- case FLASH_MAN_AMD:
- mfct = "AMD";
- break;
- case FLASH_MAN_FUJ:
- mfct = "FUJITSU";
- break;
- case FLASH_MAN_STM:
- mfct = "STM";
- break;
- case FLASH_MAN_SST:
- mfct = "SST";
- break;
- case FLASH_MAN_BM:
- mfct = "Bright Microelectonics";
- break;
- case FLASH_MAN_INTEL:
- mfct = "Intel";
- break;
- }
-
- switch(info->flash_id & FLASH_TYPEMASK){
- case FLASH_AT040:
- type = "AT49LV040 (512K * 8, uniform sector size)";
- break;
- case FLASH_AM033:
- type = "AM29F033C (4 Mbit * 8, uniform sector size)";
- break;
- case FLASH_AM040:
- type = "AM29F040B (512K * 8, uniform sector size)";
- break;
- case FLASH_AM065:
- type = "AM29F0465D ( 8 MBit * 8, uniform sector size) or part of AM29F652D( 16 MB)";
- break;
- case FLASH_AM400B:
- type = "AM29LV400B (4 Mbit, bottom boot sect)";
- break;
- case FLASH_AM400T:
- type = "AM29LV400T (4 Mbit, top boot sector)";
- break;
- case FLASH_AM800B:
- type = "AM29LV800B (8 Mbit, bottom boot sect)";
- break;
- case FLASH_AM800T:
- type = "AM29LV800T (8 Mbit, top boot sector)";
- break;
- case FLASH_AM160T:
- type = "AM29LV160T (16 Mbit, top boot sector)";
- break;
- case FLASH_AM320B:
- type = "AM29LV320B (32 Mbit, bottom boot sect)";
- break;
- case FLASH_AM320T:
- type = "AM29LV320T (32 Mbit, top boot sector)";
- break;
- case FLASH_STM800AB:
- type = "M29W800AB (8 Mbit, bottom boot sect)";
- break;
- case FLASH_SST800A:
- type = "SST39LF/VF800 (8 Mbit, uniform sector size)";
- break;
- case FLASH_SST160A:
- type = "SST39LF/VF160 (16 Mbit, uniform sector size)";
- break;
- }
- }
-
- printf(
- "\n Brand: %s Type: %s\n"
- " Size: %lu KB in %d Sectors\n",
- mfct,
- type,
- info->size >> 10,
- info->sector_count
- );
-
- printf (" Sector Start Addresses:");
-
- for (i = 0; i < info->sector_count; i++){
- unsigned long size;
- unsigned int erased;
- unsigned long * flash = (unsigned long *) info->start[i];
-
- /*
- * Check if whole sector is erased
- */
- size =
- (i != (info->sector_count - 1)) ?
- (info->start[i + 1] - info->start[i]) >> 2 :
- (info->start[0] + info->size - info->start[i]) >> 2;
-
- for(
- flash = (unsigned long *) info->start[i], erased = 1;
- (flash != (unsigned long *) info->start[i] + size) && erased;
- flash++
- ){
- erased = *flash == ~0x0UL;
- }
-
- printf(
- "%s %08lX %s %s",
- (i % 5) ? "" : "\n ",
- info->start[i],
- erased ? "E" : " ",
- info->protect[i] ? "RO" : " "
- );
- }
-
- puts("\n");
- return;
-}
-
-int flash_erase(flash_info_t *info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
- unsigned char sh8b;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Check the ROM CS */
- if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START)){
- sh8b = 3;
- }
- else{
- sh8b = 0;
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (FLASH_WORD_SIZE *)(info->start[0] + (
- (info->start[sect] - info->start[0]) << sh8b));
- if (info->flash_id & FLASH_MAN_SST){
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
- udelay(30000); /* wait 30 ms */
- }
- else
- addr[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag){
- enable_interrupts();
- }
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0){
- goto DONE;
- }
-
- start = get_timer (0);
- last = start;
- addr = (FLASH_WORD_SIZE *)(info->start[0] + (
- (info->start[l_sect] - info->start[0]) << sh8b));
- while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)info->start[0];
- volatile FLASH_WORD_SIZE *dest2;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
- ulong start;
- int flag;
- int i;
- unsigned char sh8b;
-
- /* Check the ROM CS */
- if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START)){
- sh8b = 3;
- }
- else{
- sh8b = 0;
- }
-
- dest2 = (FLASH_WORD_SIZE *)(((dest - info->start[0]) << sh8b) +
- info->start[0]);
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest2 & (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++){
- addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00A000A0;
-
- dest2[i << sh8b] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag){
- enable_interrupts();
- }
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i << sh8b] & (FLASH_WORD_SIZE)0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
-}
-
-/*----------------------------------------------------------------------- */
+++ /dev/null
-/********************************************************************
- *
- * Unless otherwise specified, Copyright (C) 2004-2005 Barco Control Rooms
- *
- * $Source: /home/services/cvs/firmware/ppc/u-boot-1.1.2/board/barco/speed.h,v $
- * $Revision: 1.2 $
- * $Author: mleeman $
- * $Date: 2005/02/21 12:48:58 $
- *
- * Last ChangeLog Entry
- * $Log: speed.h,v $
- * Revision 1.2 2005/02/21 12:48:58 mleeman
- * update of copyright years (feedback wd)
- *
- * Revision 1.1 2005/02/14 09:23:46 mleeman
- * - moved 'barcohydra' directory to a more generic barco; since we will be
- * supporting and adding multiple boards
- *
- * Revision 1.2 2005/02/09 12:56:23 mleeman
- * add generic header to track changes in sources
- *
- *
- *******************************************************************/
-
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*-----------------------------------------------------------------------
- * Timer value for timer 2, ICLK = 10
- *
- * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1))
- * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1
- *
- * SPEED_FCOUNT2 timer 2 counting frequency
- * GCLK CPU clock
- * SPEED_TMR2_PS prescaler
- */
-#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
-
-/*-----------------------------------------------------------------------
- * Timer value for PIT
- *
- * PIT_TIME = SPEED_PITC / PITRTCLK
- * PITRTCLK = 8192
- */
-#define SPEED_PITC (82 << 16) /* start counting from 82 */
-
-/*
- * The new value for PTA is calculated from
- *
- * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS)
- *
- * gclk CPU clock (not bus clock !)
- * Trefresh Refresh cycle * 4 (four word bursts used)
- * DFBRG For normal mode (no clock reduction) always 0
- * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh)
- * NCS Number of SDRAM banks (chip selects) on this UPM.
- */
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o cmd_bc3450.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o gpio_cfi_flash.o cled.o
COBJS-$(CONFIG_BFIN_MAC) += smsc9303.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_VIDEO) += video.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_STAMP_CF) += ide-cf.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_BFIN_IDE) += ide-cf.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_VIDEO) += video.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o ns16550.o serial.o m48t59y.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o pcmcia.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
+ net/libnet.o (.text*)
. = env_offset;
- common/env_embedded.o(.text)
+ common/env_embedded.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += sbc35_a9g20.o
COBJS-$(CONFIG_ATMEL_SPI) += spi.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += tny_a9260.o
COBJS-$(CONFIG_ATMEL_SPI) += spi.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
#$(shell mkdir -p $(obj)../common)
#endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
#../common/flash.o ../common/vpd.o ../common/am79c874.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := cerf250.o flash.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o gpio_cfi_flash.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o gpio_cfi_flash.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o gpio_cfi_flash.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_VIDEO) += video.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := cm4008.o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := cm41xx.o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o cmd_cm5200.o fwupdate.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := cmc_pu2.o flash.o load_sernum_ethaddr.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := flash.o cmi.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := mb.o flash.o dipsw.o lcd.o serial.o # pci.o rtc.o par.o kbm.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* MA 02111-1307 USA
*/
+#include <config.h>
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- *(.text)
- common/env_embedded.o(.text)
- *(.got1)
+#ifdef CONFIG_MPC8260
+ arch/powerpc/cpu/mpc8260/start.o (.text*)
+#else
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+#endif
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := colibri_pxa270.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o plx9030.o pd67290.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
#define HOST_TO_PCI(addr) ((addr) - 0xfe000000)
#define PCI_TO_HOST(addr) ((addr) + 0xfe000000)
-int i82365_init (void)
+static int i82365_init (void)
{
u_int val;
int i;
return 0;
}
-void i82365_exit (void)
+static void i82365_exit (void)
{
io.map = 0;
io.flags = 0;
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := cradle.o flash.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
return (0);
}
-/* ------------------------------------------------------------------------- */
-phys_size_t initdram (int board_type)
-{
- return (L1_MEMSIZE);
-}
-
/* ------------------------------------------------------------------------- */
/* stubs so we can print dates w/o any nvram RTC.*/
int rtc_get (struct rtc_time *tmp)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS = init.o
# HACK: depend needs bootscript.c, which needs tools/mkimage, which is not
# built in the depend stage. So... put bootscript.o here, not in OBJS
$(LIB): $(OBJS) $(SOBJS) $(obj)bootscript.o
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS) $(obj)bootscript.c \
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := csb226.o flash.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
#COBJS = $(BOARD).o flash.o
#COBJS = $(BOARD).o strataflash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
#COBJS = $(BOARD).o flash.o
#COBJS = $(BOARD).o strataflash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := csb637.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := B2.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o nand.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
* MA 02111-1307 USA
*/
-/*
- * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
- */
+#include "config.h" /* CONFIG_BOARDDIR */
+
+#ifndef RESET_VECTOR_ADDRESS
+#define RESET_VECTOR_ADDRESS 0xfffffffc
+#endif
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
+PHDRS
+{
+ text PT_LOAD;
+ bss PT_LOAD;
+}
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/74xx_7xx/start.o (.text)
-
-/* store the environment in a seperate sector in the boot flash */
-/* . = env_offset; */
-/* common/env_embedded.o(.text) */
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
+ *(.text*)
+ } :text
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
+ } :text
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
-
. = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
. = ALIGN(256);
__init_end = .;
+ ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and CONFIG_SYS_TEXT_BASE may need to be modified.");
+ . = 0xFFFF8000;
+ .ppcenv :
+ {
+ common/env_embedded.o(.ppcenv);
+ }
+
+ .resetvec RESET_VECTOR_ADDRESS :
+ {
+ KEEP(*(.resetvec))
+ } :text = 0xffff
+
+ . = RESET_VECTOR_ADDRESS + 0x4;
+
+ /*
+ * Make sure that the bss segment isn't linked at 0x0, otherwise its
+ * address won't be updated during relocation fixups. Note that
+ * this is a temporary fix. Code to dynamically the fixup the bss
+ * location will be added in the future. When the bss relocation
+ * fixup code is present this workaround should be removed.
+ */
+#if (RESET_VECTOR_ADDRESS == 0xfffffffc)
+ . |= 0x10;
+#endif
+
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
- . = ALIGN(4);
- }
+ } :bss
+
+ . = ALIGN(4);
_end = . ;
PROVIDE (end = .);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := qong.o fpga.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)board/$(VENDOR)/common)
endif
-LIB = $(obj)lib$(VENDOR).a
+LIB = $(obj)lib$(VENDOR).o
COBJS := misc.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += common.o
COBJS-$(CONFIG_MACH_DAVINCI_DA830_EVM) += da830evm.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
{ DAVINCI_LPSC_GPIO },
};
+#ifndef CONFIG_DA850_EVM_MAX_CPU_CLK
+#define CONFIG_DA850_EVM_MAX_CPU_CLK 300000000
+#endif
+
+/*
+ * get_board_rev() - setup to pass kernel board revision information
+ * Returns:
+ * bit[0-3] Maximum cpu clock rate supported by onboard SoC
+ * 0000b - 300 MHz
+ * 0001b - 372 MHz
+ * 0010b - 408 MHz
+ * 0011b - 456 MHz
+ */
+u32 get_board_rev(void)
+{
+ char *s;
+ u32 maxcpuclk = CONFIG_DA850_EVM_MAX_CPU_CLK;
+ u32 rev = 0;
+
+ s = getenv("maxcpuclk");
+ if (s)
+ maxcpuclk = simple_strtoul(s, NULL, 10);
+
+ if (maxcpuclk >= 456000000)
+ rev = 3;
+ else if (maxcpuclk >= 408000000)
+ rev = 2;
+ else if (maxcpuclk >= 372000000)
+ rev = 1;
+
+ return rev;
+}
+
int board_init(void)
{
#ifndef CONFIG_USE_IRQ
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS :=
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS :=
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS :=
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS :=
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := board_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := board_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := board_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := board_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS = lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o cmd_mtc.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := dnp1110.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += eNET.o
COBJS-$(CONFIG_PCI) += eNET_pci.o
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)lib$(BOARD).a
+LIB := $(obj)lib$(BOARD).o
COBJS := $(BOARD).o flash.o
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := edb93xx.o flash_cfg.o pll_cfg.o sdram_cfg.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o pci.o misc.o el_srom.o dc_srom.o l2cache.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- arch/powerpc/cpu/74xx_7xx/start.o (.text)
-
-/* store the environment in a seperate sector in the boot flash */
-/* . = env_offset; */
-/* common/env_embedded.o(.text) */
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o pci.o misc.o mpc107_i2c.o eepro100_srom.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- arch/powerpc/cpu/74xx_7xx/start.o (.text)
-
-/* store the environment in a seperate sector in the boot flash */
-/* . = env_offset; */
-/* common/env_embedded.o(.text) */
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/env_embedded.o(.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
#
-# (C) Copyright 2001-2006
+# (C) Copyright 2003-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# (C) Copyright 2010
+# Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+#
# See file CREDITS for list of people who contributed to this
# project.
#
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o flash.o
-SOBJS = init.o
+COBJS-y += top9000.o
+COBJS-$(CONFIG_ATMEL_SPI) += spi.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
--- /dev/null
+/*
+ * Copyright (C) 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_spi.h>
+#include <asm/arch/gpio.h>
+#include <spi.h>
+
+static const struct {
+ u32 port;
+ u32 bit;
+} cs_to_portbit[2][4] = {
+ {{AT91_PIO_PORTA, 3}, {AT91_PIO_PORTC, 11},
+ {AT91_PIO_PORTC, 16}, {AT91_PIO_PORTC, 17} },
+ {{AT91_PIO_PORTB, 3}, {AT91_PIO_PORTC, 5},
+ {AT91_PIO_PORTC, 4}, {AT91_PIO_PORTC, 3} }
+};
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ debug("spi_cs_is_valid: bus=%u cs=%u\n", bus, cs);
+ if (bus < 2 && cs < 4)
+ return 1;
+ return 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ debug("spi_cs_activate: bus=%u cs=%u\n", slave->bus, slave->cs);
+ at91_set_pio_output(cs_to_portbit[slave->bus][slave->cs].port,
+ cs_to_portbit[slave->bus][slave->cs].bit, 0);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ debug("spi_cs_deactivate: bus=%u cs=%u\n", slave->bus, slave->cs);
+ at91_set_pio_output(cs_to_portbit[slave->bus][slave->cs].port,
+ cs_to_portbit[slave->bus][slave->cs].bit, 1);
+}
+
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <net.h>
+#include <netdev.h>
+#include <mmc.h>
+#include <i2c.h>
+#include <spi.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91sam9260_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_shdwn.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CMD_NAND
+static void nand_hw_init(void)
+{
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA,
+ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+ AT91_SMC_DBW_8 |
+ AT91_SMC_TDF_(2));
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void macb_hw_init(void)
+{
+ /* Enable EMAC clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
+
+ /* Initialize EMAC=MACB hardware */
+ at91_macb_hw_init();
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+/* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+ /* Enable MCI clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_MCI);
+
+ /* Initialize MCI hardware */
+ at91_mci_hw_init();
+
+ /* This calls the atmel_mmc_init in gen_atmel_mci.c */
+ return atmel_mci_init((void *)AT91_BASE_MCI);
+}
+
+/* this is a weak define that we are overriding */
+int board_mmc_getcd(u8 *cd, struct mmc *mmc)
+{
+ /*
+ * the only currently existing use of this function
+ * (fsl_esdhc.c) suggests this function must return
+ * *cs = TRUE if a card is NOT detected -> in most
+ * cases the value of the pin when the detect switch
+ * closes to GND
+ */
+ *cd = at91_get_gpio_value(CONFIG_SYS_MMC_CD_PIN) ? 1 : 0;
+ return 0;
+}
+
+#endif
+
+int board_early_init_f(void)
+{
+ at91_shdwn_t *shdwn = (at91_shdwn_t *)AT91_SHDWN_BASE;
+
+ /*
+ * make sure the board can be powered on by
+ * any transition on WKUP
+ */
+ writel(AT91_SHDW_MR_WKMODE0H2L | AT91_SHDW_MR_WKMODE0L2H,
+ &shdwn->mr);
+
+ /* Enable clocks for all PIOs */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOB);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
+
+ /* set SCL0 and SDA0 to open drain */
+ at91_set_pio_output(I2C0_PORT, SCL0_PIN, 1);
+ at91_set_pio_multi_drive(I2C0_PORT, SCL0_PIN, 1);
+ at91_set_pio_pullup(I2C0_PORT, SCL0_PIN, 1);
+ at91_set_pio_output(I2C0_PORT, SDA0_PIN, 1);
+ at91_set_pio_multi_drive(I2C0_PORT, SDA0_PIN, 1);
+ at91_set_pio_pullup(I2C0_PORT, SDA0_PIN, 1);
+
+ /* set SCL1 and SDA1 to open drain */
+ at91_set_pio_output(I2C1_PORT, SCL1_PIN, 1);
+ at91_set_pio_multi_drive(I2C1_PORT, SCL1_PIN, 1);
+ at91_set_pio_pullup(I2C1_PORT, SCL1_PIN, 1);
+ at91_set_pio_output(I2C1_PORT, SDA1_PIN, 1);
+ at91_set_pio_multi_drive(I2C1_PORT, SDA1_PIN, 1);
+ at91_set_pio_pullup(I2C1_PORT, SDA1_PIN, 1);
+ return 0;
+}
+
+int board_init(void)
+{
+ /* arch number of TOP9000 Board */
+ gd->bd->bi_arch_number = MACH_TYPE_TOP9000;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ nand_hw_init();
+#endif
+#ifdef CONFIG_MACB
+ macb_hw_init();
+#endif
+#ifdef CONFIG_ATMEL_SPI0
+ /* (n+4) denotes to use nSPISEL(0) in GPIO mode! */
+ at91_spi0_hw_init(1 << (FRAM_CS_NUM + 4));
+#endif
+#ifdef CONFIG_ATMEL_SPI1
+ at91_spi1_hw_init(1 << (ENC_CS_NUM + 4));
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+ /* read 'factory' part of EEPROM */
+ read_factory_r();
+ return 0;
+}
+#endif
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size(
+ (void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+ /*
+ * Initialize ethernet HW addresses prior to starting Linux,
+ * needed for nfsroot.
+ * TODO: We need to investigate if that is really necessary.
+ */
+ eth_init(gd->bd);
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+ int num = 0;
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0,
+ (void *)AT91_EMAC_BASE,
+ CONFIG_SYS_PHY_ID);
+ if (!rc)
+ num++;
+#endif
+#ifdef CONFIG_ENC28J60
+ rc = enc28j60_initialize(ENC_SPI_BUS, ENC_CS_NUM,
+ ENC_SPI_CLOCK, SPI_MODE_0);
+ if (!rc)
+ num++;
+# ifdef CONFIG_ENC28J60_2
+ rc = enc28j60_initialize(ENC_SPI_BUS, ENC_CS_NUM+1,
+ ENC_SPI_CLOCK, SPI_MODE_0);
+ if (!rc)
+ num++;
+# ifdef CONFIG_ENC28J60_3
+ rc = enc28j60_initialize(ENC_SPI_BUS, ENC_CS_NUM+2,
+ ENC_SPI_CLOCK, SPI_MODE_0);
+ if (!rc)
+ num++;
+# endif
+# endif
+#endif
+ return num;
+}
+
+/*
+ * I2C access functions
+ *
+ * Note:
+ * We need to access Bus 0 before relocation to access the
+ * environment settings.
+ * However i2c_get_bus_num() cannot be called before
+ * relocation.
+ */
+#ifdef CONFIG_SOFT_I2C
+void iic_init(void)
+{
+ /* ports are now initialized in board_early_init_f() */
+}
+
+int iic_read(void)
+{
+ switch ((gd->flags & GD_FLG_RELOC) ? i2c_get_bus_num() : 0) {
+ case 0:
+ return at91_get_pio_value(I2C0_PORT, SDA0_PIN);
+ case 1:
+ return at91_get_pio_value(I2C1_PORT, SDA1_PIN);
+ }
+ return 1;
+}
+
+void iic_sda(int bit)
+{
+ switch ((gd->flags & GD_FLG_RELOC) ? i2c_get_bus_num() : 0) {
+ case 0:
+ at91_set_pio_value(I2C0_PORT, SDA0_PIN, bit);
+ break;
+ case 1:
+ at91_set_pio_value(I2C1_PORT, SDA1_PIN, bit);
+ break;
+ }
+}
+
+void iic_scl(int bit)
+{
+ switch ((gd->flags & GD_FLG_RELOC) ? i2c_get_bus_num() : 0) {
+ case 0:
+ at91_set_pio_value(I2C0_PORT, SCL0_PIN, bit);
+ break;
+ case 1:
+ at91_set_pio_value(I2C1_PORT, SCL1_PIN, bit);
+ break;
+ }
+}
+
+#endif
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := ep7312.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o mii_phy.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
/*
- * (C) Copyright 2001-2003
+ * (C) Copyright 2001-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Modified by Yuli Barcohen <yuli@arabellasw.com>
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- *(.text)
- *(.got1)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ *(.text*)
. = ALIGN(16);
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <i2c.h>
-#include "eric.h"
-#include <asm/processor.h>
-
-#define PPC405GP_GPIO0_OR 0xef600700 /* GPIO Output */
-#define PPC405GP_GPIO0_TCR 0xef600704 /* GPIO Three-State Control */
-#define PPC405GP_GPIO0_ODR 0xef600718 /* GPIO Open Drain */
-#define PPC405GP_GPIO0_IR 0xef60071c /* GPIO Input */
-
-void sdram_init(void);
-
-int board_early_init_f (void)
-{
-
- /*-------------------------------------------------------------------------+
- | Interrupt controller setup for the ERIC board.
- | Note: IRQ 0-15 405GP internally generated; active high; level sensitive
- | IRQ 16 405GP internally generated; active low; level sensitive
- | IRQ 17-24 RESERVED
- | IRQ 25 (EXT IRQ 0) FLASH; active low; level sensitive
- | IRQ 26 (EXT IRQ 1) PHY ; active low; level sensitive
- | IRQ 27 (EXT IRQ 2) HOST FAIL, active low; level sensitive
- | indicates NO Power or HOST RESET active
- | check GPIO7 (HOST RESET#) and GPIO8 (NO Power#)
- | for real IRQ source
- | IRQ 28 (EXT IRQ 3) HOST; active high; level sensitive
- | IRQ 29 (EXT IRQ 4) PCI INTC#; active low; level sensitive
- | IRQ 30 (EXT IRQ 5) PCI INTB#; active low; level sensitive
- | IRQ 31 (EXT IRQ 6) PCI INTA#; active low; level sensitive
- | -> IRQ6 Pin is NOW GPIO23 and can be activateted by setting
- | PPC405GP_GPIO0_TCR Bit 0 = 1 (driving the output as defined in PPC405GP_GPIO0_OR,
- | else tristate)
- | Note for ERIC board:
- | An interrupt taken for the HOST (IRQ 28) indicates that
- | the HOST wrote a "1" to one of the following locations
- | - VGA CRT_GPIO0 (if R1216 is loaded)
- | - VGA CRT_GPIO1 (if R1217 is loaded)
- |
- +-------------------------------------------------------------------------*/
-
- mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
- mtdcr (UIC0ER, 0x00000000); /* disable all ints */
- mtdcr (UIC0CR, 0x00000000); /* set all SMI to be non-critical */
- mtdcr (UIC0PR, 0xFFFFFF88); /* set int polarities; IRQ3 to 1 */
- mtdcr (UIC0TR, 0x10000000); /* set int trigger levels, UART0 is EDGE */
- mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
-
- mtdcr (CPC0_CR0, 0x00002000); /* set IRQ6 as GPIO23 to generate an interrupt request to the PCP2PCI bridge */
-
- out32 (PPC405GP_GPIO0_OR, 0x60000000); /*fixme is SMB_INT high or low active??; IRQ6 is GPIO23 output */
- out32 (PPC405GP_GPIO0_TCR, 0x7E400000);
-
- return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
- char *s = getenv ("serial#");
- char *e;
-
- puts ("Board: ");
-
- if (!s || strncmp (s, "ERIC", 9)) {
- puts ("### No HW ID - assuming ERIC");
- } else {
- for (e = s; *e; ++e) {
- if (*e == ' ')
- break;
- }
-
- for (; s < e; ++s) {
- putc (*s);
- }
- }
-
-
- putc ('\n');
-
- return (0);
-}
-
-
-/* ------------------------------------------------------------------------- */
-/* ------------------------------------------------------------------------- */
-/* ------------------------------------------------------------------------- */
-/*
- initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
- the necessary info for SDRAM controller configuration
-*/
-/* ------------------------------------------------------------------------- */
-/* ------------------------------------------------------------------------- */
-phys_size_t initdram (int board_type)
-{
-#ifndef CONFIG_ERIC
- int i;
- unsigned char datain[128];
- int TotalSize;
-#endif
-
- /*
- * ToDo: Move the asm init routine sdram_init() to this C file,
- * or even better use some common ppc4xx code available
- * in arch/powerpc/cpu/ppc4xx
- */
- sdram_init();
-
-#ifdef CONFIG_ERIC
- /*
- * we have no EEPROM on ERIC
- * so let init.S do the init job for SDRAM
- * and simply return 32MByte here
- */
- return (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024);
-#else
-
- /* Read Serial Presence Detect Information */
- for (i = 0; i < 128; i++)
- datain[i] = 127;
- i2c_send (SPD_EEPROM_ADDRESS, 0, 1, datain, 128);
- printf ("\nReading DIMM...\n");
-#if 0
- for (i = 0; i < 128; i++) {
- printf ("%d=0x%x ", i, datain[i]);
- if (((i + 1) % 10) == 0)
- printf ("\n");
- }
- printf ("\n");
-#endif
-
- /*****************************/
- /* Retrieve interesting data */
- /*****************************/
- /* size of a SDRAM bank */
- /* Number of bytes per side / number of banks per side */
- if (datain[31] == 0x08)
- TotalSize = 32;
- else if (datain[31] == 0x10)
- TotalSize = 64;
- else {
- printf ("IIC READ ERROR!!!\n");
- TotalSize = 32;
- }
-
- /* single-sided DIMM or double-sided DIMM? */
- if (datain[5] != 1) {
- /* double-sided DIMM => SDRAM banks 0..3 are valid */
- printf ("double-sided DIMM\n");
- TotalSize *= 2;
- }
- /* else single-sided DIMM => SDRAM bank 0 and bank 2 are valid */
- else {
- printf ("single-sided DIMM\n");
- }
-
-
- /* return size in Mb unit => *(1024*1024) */
- return (TotalSize * 1024 * 1024);
-#endif
-}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
- /* TODO: XXX XXX XXX */
- printf ("test: xxx MB - ok\n");
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/****************************************************************************
- * FLASH Memory Map as used by TQ Monitor:
- *
- * Start Address Length
- * +-----------------------+ 0x4000_0000 Start of Flash -----------------
- * | MON8xx code | 0x4000_0100 Reset Vector
- * +-----------------------+ 0x400?_????
- * | (unused) |
- * +-----------------------+ 0x4001_FF00
- * | Ethernet Addresses | 0x78
- * +-----------------------+ 0x4001_FF78
- * | (Reserved for MON8xx) | 0x44
- * +-----------------------+ 0x4001_FFBC
- * | Lock Address | 0x04
- * +-----------------------+ 0x4001_FFC0 ^
- * | Hardware Information | 0x40 | MON8xx
- * +=======================+ 0x4002_0000 (sector border) -----------------
- * | Autostart Header | | Applications
- * | ... | v
- *
- *****************************************************************************/
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-
-#ifdef CONFIG_SYS_FLASH_16BIT
-#define FLASH_WORD_SIZE unsigned short
-#define FLASH_ID_MASK 0xFFFF
-#else
-#define FLASH_WORD_SIZE unsigned long
-#define FLASH_ID_MASK 0xFFFFFFFF
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-/* stolen from esteem192e/flash.c */
-ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info);
-
-#ifndef CONFIG_SYS_FLASH_16BIT
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-#else
-static int write_short (flash_info_t *info, ulong dest, ushort data);
-#endif
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- unsigned long size_b0, size_b1;
- int i;
- uint pbcr;
- unsigned long base_b0, base_b1;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- /* Only one bank */
- if (CONFIG_SYS_MAX_FLASH_BANKS == 1)
- {
- /* Setup offsets */
- flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
-
- /* Monitor protection ON by default */
-#if 0 /* sand: */
- (void)flash_protect(FLAG_PROTECT_SET,
- FLASH_BASE0_PRELIM-monitor_flash_len+size_b0,
- FLASH_BASE0_PRELIM-1+size_b0,
- &flash_info[0]);
-#else
- (void)flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
- size_b1 = 0 ;
- flash_info[0].size = size_b0;
- }
-
- /* 2 banks */
- else
- {
- size_b1 = flash_get_size((volatile FLASH_WORD_SIZE *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
- /* Re-do sizing to get full correct info */
-
- if (size_b1)
- {
- mtdcr(EBC0_CFGADDR, PB0CR);
- pbcr = mfdcr(EBC0_CFGDATA);
- mtdcr(EBC0_CFGADDR, PB0CR);
- base_b1 = -size_b1;
- pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
- mtdcr(EBC0_CFGDATA, pbcr);
- /* printf("PB1CR = %x\n", pbcr); */
- }
-
- if (size_b0)
- {
- mtdcr(EBC0_CFGADDR, PB1CR);
- pbcr = mfdcr(EBC0_CFGDATA);
- mtdcr(EBC0_CFGADDR, PB1CR);
- base_b0 = base_b1 - size_b0;
- pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
- mtdcr(EBC0_CFGDATA, pbcr);
- /* printf("PB0CR = %x\n", pbcr); */
- }
-
- size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)base_b0, &flash_info[0]);
-
- flash_get_offsets (base_b0, &flash_info[0]);
-
- /* monitor protection ON by default */
-#if 0 /* sand: */
- (void)flash_protect(FLAG_PROTECT_SET,
- FLASH_BASE0_PRELIM-monitor_flash_len+size_b0,
- FLASH_BASE0_PRELIM-1+size_b0,
- &flash_info[0]);
-#else
- (void)flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
- if (size_b1) {
- /* Re-do sizing to get full correct info */
- size_b1 = flash_get_size((volatile FLASH_WORD_SIZE *)base_b1, &flash_info[1]);
-
- flash_get_offsets (base_b1, &flash_info[1]);
-
- /* monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- base_b1+size_b1-monitor_flash_len,
- base_b1+size_b1-1,
- &flash_info[1]);
- /* monitor protection OFF by default (one is enough) */
- (void)flash_protect(FLAG_PROTECT_CLEAR,
- base_b0+size_b0-monitor_flash_len,
- base_b0+size_b0-1,
- &flash_info[0]);
- } else {
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
- }
-
- flash_info[0].size = size_b0;
- flash_info[1].size = size_b1;
- }/* else 2 banks */
- return (size_b0 + size_b1);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start adress table */
- if ((info->flash_id & FLASH_TYPEMASK) == FLASH_28F320J3A ||
- (info->flash_id & FLASH_TYPEMASK) == FLASH_28F640J3A ||
- (info->flash_id & FLASH_TYPEMASK) == FLASH_28F128J3A) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * info->size/info->sector_count);
- }
- } else if (info->flash_id & FLASH_BTYPE) {
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-
-#ifndef CONFIG_SYS_FLASH_16BIT
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00008000;
- info->start[3] = base + 0x0000C000;
- info->start[4] = base + 0x00010000;
- info->start[5] = base + 0x00014000;
- info->start[6] = base + 0x00018000;
- info->start[7] = base + 0x0001C000;
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x000E0000;
- }
- }
- else {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000) - 0x00060000;
- }
- }
-#else
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00002000;
- info->start[2] = base + 0x00004000;
- info->start[3] = base + 0x00006000;
- info->start[4] = base + 0x00008000;
- info->start[5] = base + 0x0000A000;
- info->start[6] = base + 0x0000C000;
- info->start[7] = base + 0x0000E000;
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00070000;
- }
- }
- else {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- }
-#endif
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-
-#ifndef CONFIG_SYS_FLASH_16BIT
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- info->start[i--] = base + info->size - 0x00014000;
- info->start[i--] = base + info->size - 0x00018000;
- info->start[i--] = base + info->size - 0x0001C000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
-
- } else {
-
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x00010000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00020000;
- }
- }
-#else
- info->start[i--] = base + info->size - 0x00002000;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- info->start[i--] = base + info->size - 0x0000A000;
- info->start[i--] = base + info->size - 0x0000C000;
- info->start[i--] = base + info->size - 0x0000E000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
-
- } else {
-
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-#endif
- }
-
-
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
- int i;
- uchar *boottype;
- uchar botboot[]=", bottom boot sect)\n";
- uchar topboot[]=", top boot sector)\n";
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- case FLASH_MAN_STM: printf ("STM "); break;
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- if (info->flash_id & 0x0001 ) {
- boottype = botboot;
- } else {
- boottype = topboot;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit%s",boottype);
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit%s",boottype);
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit%s",boottype);
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit%s",boottype);
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit%s",boottype);
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit%s",boottype);
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit%s",boottype);
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit%s",boottype);
- break;
- case FLASH_INTEL800B: printf ("INTEL28F800B (8 Mbit%s",boottype);
- break;
- case FLASH_INTEL800T: printf ("INTEL28F800T (8 Mbit%s",boottype);
- break;
- case FLASH_INTEL160B: printf ("INTEL28F160B (16 Mbit%s",boottype);
- break;
- case FLASH_INTEL160T: printf ("INTEL28F160T (16 Mbit%s",boottype);
- break;
- case FLASH_INTEL320B: printf ("INTEL28F320B (32 Mbit%s",boottype);
- break;
- case FLASH_INTEL320T: printf ("INTEL28F320T (32 Mbit%s",boottype);
- break;
-
-#if 0 /* enable when devices are available */
-
- case FLASH_INTEL640B: printf ("INTEL28F640B (64 Mbit%s",boottype);
- break;
- case FLASH_INTEL640T: printf ("INTEL28F640T (64 Mbit%s",boottype);
- break;
-#endif
- case FLASH_28F320J3A: printf ("INTEL28F320J3A (32 Mbit%s",boottype);
- break;
- case FLASH_28F640J3A: printf ("INTEL28F640J3A (64 Mbit%s",boottype);
- break;
- case FLASH_28F128J3A: printf ("INTEL28F128J3A (128 Mbit%s",boottype);
- break;
-
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
-{
- short i;
- ulong base = (ulong)addr;
- FLASH_WORD_SIZE value;
-
- /* Write auto select command: read Manufacturer ID */
-
-
-#ifndef CONFIG_SYS_FLASH_16BIT
-
- /*
- * Note: if it is an AMD flash and the word at addr[0000]
- * is 0x00890089 this routine will think it is an Intel
- * flash device and may(most likely) cause trouble.
- */
-
- addr[0x0000] = 0x00900090;
- if(addr[0x0000] != 0x00890089){
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00900090;
-#else
-
- /*
- * Note: if it is an AMD flash and the word at addr[0000]
- * is 0x0089 this routine will think it is an Intel
- * flash device and may(most likely) cause trouble.
- */
-
- addr[0x0000] = 0x0090;
-
- if(addr[0x0000] != 0x0089){
- addr[0x0555] = 0x00AA;
- addr[0x02AA] = 0x0055;
- addr[0x0555] = 0x0090;
-#endif
- }
- value = addr[0];
-
- switch (value) {
- case (AMD_MANUFACT & FLASH_ID_MASK):
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FUJ_MANUFACT & FLASH_ID_MASK):
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (STM_MANUFACT & FLASH_ID_MASK):
- info->flash_id = FLASH_MAN_STM;
- break;
- case (SST_MANUFACT & FLASH_ID_MASK):
- info->flash_id = FLASH_MAN_SST;
- break;
- case (INTEL_MANUFACT & FLASH_ID_MASK):
- info->flash_id = FLASH_MAN_INTEL;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
-
- }
-
- value = addr[1]; /* device ID */
-
- switch (value) {
-
- case (AMD_ID_LV400T & FLASH_ID_MASK):
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (AMD_ID_LV400B & FLASH_ID_MASK):
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (AMD_ID_LV800T & FLASH_ID_MASK):
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (AMD_ID_LV800B & FLASH_ID_MASK):
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (AMD_ID_LV160T & FLASH_ID_MASK):
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (AMD_ID_LV160B & FLASH_ID_MASK):
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#if 0 /* enable when device IDs are available */
- case (AMD_ID_LV320T & FLASH_ID_MASK):
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case (AMD_ID_LV320B & FLASH_ID_MASK):
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00800000;
- break; /* => 8 MB */
-#endif
-
- case (INTEL_ID_28F800B3T & FLASH_ID_MASK):
- info->flash_id += FLASH_INTEL800T;
- info->sector_count = 23;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (INTEL_ID_28F800B3B & FLASH_ID_MASK):
- info->flash_id += FLASH_INTEL800B;
- info->sector_count = 23;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (INTEL_ID_28F160B3T & FLASH_ID_MASK):
- info->flash_id += FLASH_INTEL160T;
- info->sector_count = 39;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (INTEL_ID_28F160B3B & FLASH_ID_MASK):
- info->flash_id += FLASH_INTEL160B;
- info->sector_count = 39;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (INTEL_ID_28F320B3T & FLASH_ID_MASK):
- info->flash_id += FLASH_INTEL320T;
- info->sector_count = 71;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case (INTEL_ID_28F320B3B & FLASH_ID_MASK):
- info->flash_id += FLASH_AM320B;
- info->sector_count = 71;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
-#if 0 /* enable when devices are available */
- case (INTEL_ID_28F320B3T & FLASH_ID_MASK):
- info->flash_id += FLASH_INTEL320T;
- info->sector_count = 135;
- info->size = 0x01000000;
- break; /* => 16 MB */
-
- case (INTEL_ID_28F320B3B & FLASH_ID_MASK):
- info->flash_id += FLASH_AM320B;
- info->sector_count = 135;
- info->size = 0x01000000;
- break; /* => 16 MB */
-#endif
- case (INTEL_ID_28F320J3A & FLASH_ID_MASK):
- info->flash_id += FLASH_28F320J3A;
- info->sector_count = 32;
- info->size = 0x00400000;
- break; /* => 32 MBit */
- case (INTEL_ID_28F640J3A & FLASH_ID_MASK):
- info->flash_id += FLASH_28F640J3A;
- info->sector_count = 64;
- info->size = 0x00800000;
- break; /* => 64 MBit */
- case (INTEL_ID_28F128J3A & FLASH_ID_MASK):
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x01000000;
- break; /* => 128 MBit */
-
- default:
- /* FIXME*/
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
- }
-
- flash_get_offsets(base, info);
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr = (volatile FLASH_WORD_SIZE *)info->start[0];
- if( (info->flash_id & 0xFF00) == FLASH_MAN_INTEL){
- *addr = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
- } else {
- *addr = (0x00FF00FF & FLASH_ID_MASK); /* reset bank */
- }
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-
- volatile FLASH_WORD_SIZE *addr=(volatile FLASH_WORD_SIZE*)(info->start[0]);
- int flag, prot, sect, l_sect, barf;
- ulong start, now, last;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- ((info->flash_id > FLASH_AMD_COMP) &&
- ( (info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL ) ) ){
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
- if(info->flash_id < FLASH_AMD_COMP) {
-#ifndef CONFIG_SYS_FLASH_16BIT
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00800080;
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
-#else
- addr[0x0555] = 0x00AA;
- addr[0x02AA] = 0x0055;
- addr[0x0555] = 0x0080;
- addr[0x0555] = 0x00AA;
- addr[0x02AA] = 0x0055;
-#endif
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]);
- addr[0] = (0x00300030 & FLASH_ID_MASK);
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (volatile FLASH_WORD_SIZE*)(info->start[l_sect]);
- while ((addr[0] & (0x00800080&FLASH_ID_MASK)) !=
- (0x00800080&FLASH_ID_MASK) )
- {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (volatile FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
- } else {
-
-
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- barf = 0;
-#ifndef CONFIG_SYS_FLASH_16BIT
- addr = (vu_long*)(info->start[sect]);
- addr[0] = 0x00200020;
- addr[0] = 0x00D000D0;
- while(!(addr[0] & 0x00800080)); /* wait for error or finish */
- if( addr[0] & 0x003A003A) { /* check for error */
- barf = addr[0] & 0x003A0000;
- if( barf ) {
- barf >>=16;
- } else {
- barf = addr[0] & 0x0000003A;
- }
- }
-#else
- addr = (vu_short*)(info->start[sect]);
- addr[0] = 0x0020;
- addr[0] = 0x00D0;
- while(!(addr[0] & 0x0080)); /* wait for error or finish */
- if( addr[0] & 0x003A) /* check for error */
- barf = addr[0] & 0x003A;
-#endif
- if(barf) {
- printf("\nFlash error in sector at %lx\n",(unsigned long)addr);
- if(barf & 0x0002) printf("Block locked, not erased.\n");
- if((barf & 0x0030) == 0x0030)
- printf("Command Sequence error.\n");
- if((barf & 0x0030) == 0x0020)
- printf("Block Erase error.\n");
- if(barf & 0x0008) printf("Vpp Low error.\n");
- rcode = 1;
- } else printf(".");
- l_sect = sect;
- }
- addr = (volatile FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (0x00FF00FF & FLASH_ID_MASK); /* reset bank */
-
- }
-
- }
- printf (" done\n");
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*flash_info_t *addr2info (ulong addr)
-{
- flash_info_t *info;
- int i;
-
- for (i=0, info=&flash_info[0]; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
- if ((addr >= info->start[0]) &&
- (addr < (info->start[0] + info->size)) ) {
- return (info);
- }
- }
-
- return (NULL);
-}
-*/
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- * Make sure all target addresses are within Flash bounds,
- * and no protected sectors are hit.
- * Returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - target range includes protected sectors
- * 8 - target address not in Flash memory
- */
-
-/*int flash_write (uchar *src, ulong addr, ulong cnt)
-{
- int i;
- ulong end = addr + cnt - 1;
- flash_info_t *info_first = addr2info (addr);
- flash_info_t *info_last = addr2info (end );
- flash_info_t *info;
-
- if (cnt == 0) {
- return (0);
- }
-
- if (!info_first || !info_last) {
- return (8);
- }
-
- for (info = info_first; info <= info_last; ++info) {
- ulong b_end = info->start[0] + info->size;*/ /* bank end addr */
-/* short s_end = info->sector_count - 1;
- for (i=0; i<info->sector_count; ++i) {
- ulong e_addr = (i == s_end) ? b_end : info->start[i + 1];
-
- if ((end >= info->start[i]) && (addr < e_addr) &&
- (info->protect[i] != 0) ) {
- return (4);
- }
- }
- }
-
-*/ /* finally write data to flash */
-/* for (info = info_first; info <= info_last && cnt>0; ++info) {
- ulong len;
-
- len = info->start[0] + info->size - addr;
- if (len > cnt)
- len = cnt;
- if ((i = write_buff(info, src, addr, len)) != 0) {
- return (i);
- }
- cnt -= len;
- addr += len;
- src += len;
- }
- return (0);
-}
-*/
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-#ifndef CONFIG_SYS_FLASH_16BIT
- ulong cp, wp, data;
- int l;
-#else
- ulong cp, wp;
- ushort data;
-#endif
- int i, rc;
-
-#ifndef CONFIG_SYS_FLASH_16BIT
-
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-
-#else
- wp = (addr & ~1); /* get lower word aligned address */
-
- /*
- * handle unaligned start byte
- */
- if (addr - wp) {
- data = 0;
- data = (data << 8) | *src++;
- --cnt;
- if ((rc = write_short(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /*
- * handle word aligned part
- */
-/* l = 0; used for debuging */
- while (cnt >= 2) {
- data = 0;
- for (i=0; i<2; ++i) {
- data = (data << 8) | *src++;
- }
-
-/* if(!l){
- printf("%x",data);
- l = 1;
- } used for debuging */
-
- if ((rc = write_short(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<2; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_short(info, wp, data));
-
-
-#endif
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-#ifndef CONFIG_SYS_FLASH_16BIT
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long *) (info->start[0]);
- ulong start, barf;
- int flag;
-
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_long *) dest) & data) != data) {
- return (2);
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- if (info->flash_id > FLASH_AMD_COMP) {
- /* AMD stuff */
- addr[0x0555] = 0x00AA00AA;
- addr[0x02AA] = 0x00550055;
- addr[0x0555] = 0x00A000A0;
- } else {
- /* intel stuff */
- *addr = 0x00400040;
- }
- *((vu_long *) dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
-
- if (info->flash_id > FLASH_AMD_COMP) {
-
- while ((*((vu_long *) dest) & 0x00800080) !=
- (data & 0x00800080)) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
-
- } else {
-
- while (!(addr[0] & 0x00800080)) { /* wait for error or finish */
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
-
- if (addr[0] & 0x003A003A) { /* check for error */
- barf = addr[0] & 0x003A0000;
- if (barf) {
- barf >>= 16;
- } else {
- barf = addr[0] & 0x0000003A;
- }
- printf ("\nFlash write error at address %lx\n",
- (unsigned long) dest);
- if (barf & 0x0002)
- printf ("Block locked, not erased.\n");
- if (barf & 0x0010)
- printf ("Programming error.\n");
- if (barf & 0x0008)
- printf ("Vpp Low error.\n");
- return (2);
- }
-
-
- }
-
- return (0);
-
- }
-
-#else
-
-static int write_short (flash_info_t * info, ulong dest, ushort data)
-{
- vu_short *addr = (vu_short *) (info->start[0]);
- ulong start, barf;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_short *) dest) & data) != data) {
- return (2);
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- if (info->flash_id < FLASH_AMD_COMP) {
- /* AMD stuff */
- addr[0x0555] = 0x00AA;
- addr[0x02AA] = 0x0055;
- addr[0x0555] = 0x00A0;
- } else {
- /* intel stuff */
- *addr = 0x00D0;
- *addr = 0x0040;
- }
- *((vu_short *) dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
-
- if (info->flash_id < FLASH_AMD_COMP) {
- /* AMD stuff */
- while ((*((vu_short *) dest) & 0x0080) != (data & 0x0080)) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
-
- } else {
- /* intel stuff */
- while (!(addr[0] & 0x0080)) { /* wait for error or finish */
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT)
- return (1);
- }
-
- if (addr[0] & 0x003A) { /* check for error */
- barf = addr[0] & 0x003A;
- printf ("\nFlash write error at address %lx\n",
- (unsigned long) dest);
- if (barf & 0x0002)
- printf ("Block locked, not erased.\n");
- if (barf & 0x0010)
- printf ("Programming error.\n");
- if (barf & 0x0008)
- printf ("Vpp Low error.\n");
- return (2);
- }
- *addr = 0x00B0;
- *addr = 0x0070;
- while (!(addr[0] & 0x0080)) { /* wait for error or finish */
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT)
- return (1);
- }
- *addr = 0x00FF;
- }
- return (0);
-}
-#endif
-/*-----------------------------------------------------------------------*/
+++ /dev/null
-/*------------------------------------------------------------------------------+ */
-/* */
-/* This source code is dual-licensed. You may use it under the terms */
-/* of the GNU General Public License version 2, or under the license */
-/* below. */
-/* */
-/* This source code has been made available to you by IBM on an AS-IS */
-/* basis. Anyone receiving this source is licensed under IBM */
-/* copyrights to use it in any way he or she deems fit, including */
-/* copying it, modifying it, compiling it, and redistributing it either */
-/* with or without modifications. No license under IBM patents or */
-/* patent applications is to be implied by the copyright license. */
-/* */
-/* Any user of this software should understand that IBM cannot provide */
-/* technical support for this software and will not be responsible for */
-/* any consequences resulting from the use of this software. */
-/* */
-/* Any person who transfers this source code or any derivative work */
-/* must include the IBM copyright notice, this paragraph, and the */
-/* preceding two paragraphs in the transferred software. */
-/* */
-/* COPYRIGHT I B M CORPORATION 1995 */
-/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
-/*------------------------------------------------------------------------------- */
-
-/*----------------------------------------------------------------------------- */
-/* Function: ext_bus_cntlr_init */
-/* Description: Initializes the External Bus Controller for the external */
-/* peripherals. IMPORTANT: For pass1 this code must run from */
-/* cache since you can not reliably change a peripheral banks */
-/* timing register (pbxap) while running code from that bank. */
-/* For ex., since we are running from ROM on bank 0, we can NOT */
-/* execute the code that modifies bank 0 timings from ROM, so */
-/* we run it from cache. */
-/* */
-/*----------------------------------------------------------------------------- */
-#include <config.h>
-#include <asm/ppc4xx.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-
- .globl ext_bus_cntlr_init
-ext_bus_cntlr_init:
- mflr r4 /* save link register */
- bl ..getAddr
-..getAddr:
- mflr r3 /* get address of ..getAddr */
- mtlr r4 /* restore link register */
- addi r4,0,14 /* set ctr to 10; used to prefetch */
- mtctr r4 /* 10 cache lines to fit this function */
- /* in cache (gives us 8x10=80 instrctns) */
-..ebcloop:
- icbt r0,r3 /* prefetch cache line for addr in r3 */
- addi r3,r3,32 /* move to next cache line */
- bdnz ..ebcloop /* continue for 10 cache lines */
-
- /*------------------------------------------------------------------- */
- /* Delay to ensure all accesses to ROM are complete before changing */
- /* bank 0 timings. 200usec should be enough. */
- /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
- /*------------------------------------------------------------------- */
- addis r3,0,0x0
- ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
- mtctr r3
-..spinlp:
- bdnz ..spinlp /* spin loop */
-
- /*----------------------------------------------------------------------- */
- /* Memory Bank 0 (Flash) initialization (from openbios) */
- /*----------------------------------------------------------------------- */
-
- addi r4,0,PB1AP
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS0_AP@h
- ori r4,r4,CS0_AP@l
- mtdcr EBC0_CFGDATA,r4
-
- addi r4,0,PB0CR
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS0_CR@h
- ori r4,r4,CS0_CR@l
- mtdcr EBC0_CFGDATA,r4
-
- /*----------------------------------------------------------------------- */
- /* Memory Bank 1 (NVRAM/RTC) initialization */
- /*----------------------------------------------------------------------- */
-
- addi r4,0,PB1AP
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS1_AP@h
- ori r4,r4,CS1_AP@l
- mtdcr EBC0_CFGDATA,r4
-
- addi r4,0,PB1CR
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS1_CR@h
- ori r4,r4,CS1_CR@l
- mtdcr EBC0_CFGDATA,r4
-
- /*----------------------------------------------------------------------- */
- /* Memory Bank 2 (A/D converter) initialization */
- /*----------------------------------------------------------------------- */
-
- addi r4,0,PB2AP
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS2_AP@h
- ori r4,r4,CS2_AP@l
- mtdcr EBC0_CFGDATA,r4
-
- addi r4,0,PB2CR
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS2_CR@h
- ori r4,r4,CS2_CR@l
- mtdcr EBC0_CFGDATA,r4
-
- /*----------------------------------------------------------------------- */
- /* Memory Bank 3 (Ethernet PHY Reset) initialization */
- /*----------------------------------------------------------------------- */
-
- addi r4,0,PB3AP
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS3_AP@h
- ori r4,r4,CS3_AP@l
- mtdcr EBC0_CFGDATA,r4
-
- addi r4,0,PB3CR
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS3_CR@h
- ori r4,r4,CS3_CR@l
- mtdcr EBC0_CFGDATA,r4
-
- /*----------------------------------------------------------------------- */
- /* Memory Bank 4 (PC-MIP PRSNT1#) initialization */
- /*----------------------------------------------------------------------- */
-
- addi r4,0,PB4AP
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS4_AP@h
- ori r4,r4,CS4_AP@l
- mtdcr EBC0_CFGDATA,r4
-
- addi r4,0,PB4CR
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS4_CR@h
- ori r4,r4,CS4_CR@l
- mtdcr EBC0_CFGDATA,r4
-
- /*----------------------------------------------------------------------- */
- /* Memory Bank 5 (PC-MIP PRSNT2#) initialization */
- /*----------------------------------------------------------------------- */
-
- addi r4,0,PB5AP
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS5_AP@h
- ori r4,r4,CS5_AP@l
- mtdcr EBC0_CFGDATA,r4
-
- addi r4,0,PB5CR
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS5_CR@h
- ori r4,r4,CS5_CR@l
- mtdcr EBC0_CFGDATA,r4
-
- /*----------------------------------------------------------------------- */
- /* Memory Bank 6 (CPU LED0) initialization */
- /*----------------------------------------------------------------------- */
-
- addi r4,0,PB6AP
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS6_AP@h
- ori r4,r4,CS6_AP@l
- mtdcr EBC0_CFGDATA,r4
-
- addi r4,0,PB6CR
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS6_CR@h
- ori r4,r4,CS5_CR@l
- mtdcr EBC0_CFGDATA,r4
-
- /*----------------------------------------------------------------------- */
- /* Memory Bank 7 (CPU LED1) initialization */
- /*----------------------------------------------------------------------- */
-
- addi r4,0,PB7AP
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS7_AP@h
- ori r4,r4,CS7_AP@l
- mtdcr EBC0_CFGDATA,r4
-
- addi r4,0,PB7CR
- mtdcr EBC0_CFGADDR,r4
- addis r4,0,CS7_CR@h
- ori r4,r4,CS7_CR@l
- mtdcr EBC0_CFGDATA,r4
-
-/* addis r4,r0,FPGA_BRDC@h */
-/* ori r4,r4,FPGA_BRDC@l */
-/* lbz r3,0(r4) /###*get FPGA board control reg */
-/* eieio */
-/* ori r3,r3,0x01 /###*set UART1 control to select CTS/RTS */
-/* stb r3,0(r4) */
-
- nop /* pass2 DCR errata #8 */
- blr
-
-/*----------------------------------------------------------------------------- */
-/* Function: sdram_init */
-/* Description: Configures SDRAM memory banks on ERIC. */
-/* We do manually init our SDRAM. */
-/* If we have two SDRAM banks, simply undef SINGLE_BANK (ROLF :-) */
-/* It is assumed that a 32MB 12x8(2) SDRAM is used. */
-/*----------------------------------------------------------------------------- */
- .globl sdram_init
-
-sdram_init:
-
- mflr r31
-
-#ifdef CONFIG_SYS_SDRAM_MANUALLY
- /*------------------------------------------------------------------- */
- /* Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2) */
- /*------------------------------------------------------------------- */
-
- addi r4,0,SDRAM0_B0CR
- mtdcr SDRAM0_CFGADDR,r4
- addis r4,0,MB0CF@h
- ori r4,r4,MB0CF@l
- mtdcr SDRAM0_CFGDATA,r4
-
- /*------------------------------------------------------------------- */
- /* Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2) */
- /*------------------------------------------------------------------- */
-
- addi r4,0,SDRAM0_B1CR
- mtdcr SDRAM0_CFGADDR,r4
- addis r4,0,MB1CF@h
- ori r4,r4,MB1CF@l
- mtdcr SDRAM0_CFGDATA,r4
-
- /*------------------------------------------------------------------- */
- /* Set MB2CF for bank 2. off */
- /*------------------------------------------------------------------- */
-
- addi r4,0,SDRAM0_B2CR
- mtdcr SDRAM0_CFGADDR,r4
- addis r4,0,MB2CF@h
- ori r4,r4,MB2CF@l
- mtdcr SDRAM0_CFGDATA,r4
-
- /*------------------------------------------------------------------- */
- /* Set MB3CF for bank 3. off */
- /*------------------------------------------------------------------- */
-
- addi r4,0,SDRAM0_B3CR
- mtdcr SDRAM0_CFGADDR,r4
- addis r4,0,MB3CF@h
- ori r4,r4,MB3CF@l
- mtdcr SDRAM0_CFGDATA,r4
-
- /*------------------------------------------------------------------- */
- /* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR. */
- /* To set the appropriate timings, we need to know the SDRAM speed. */
- /* We can use the PLB speed since the SDRAM speed is the same as */
- /* the PLB speed. The PLB speed is the FBK divider times the */
- /* 405GP reference clock, which on the Walnut board is 33Mhz. */
- /* Thus, if FBK div is 2, SDRAM is 66Mhz; if FBK div is 3, SDRAM is */
- /* 100Mhz; if FBK is 3, SDRAM is 133Mhz. */
- /* NOTE: The Walnut board supports SDRAM speeds of 66Mhz, 100Mhz, and */
- /* maybe 133Mhz. */
- /*------------------------------------------------------------------- */
-
- mfdcr r5,CPC0_PSR /* determine FBK divider */
- /* via STRAP reg to calc PLB speed. */
- /* SDRAM speed is the same as the PLB */
- /* speed. */
- rlwinm r4,r5,4,0x3 /* get FBK divide bits */
-
-..chk_66:
- cmpi %cr0,0,r4,0x1
- bne ..chk_100
- addis r6,0,SDTR_66@h /* SDTR1 value for 66Mhz */
- ori r6,r6,SDTR_66@l
- addis r7,0,RTR_66 /* RTR value for 66Mhz */
- b ..sdram_ok
-..chk_100:
- cmpi %cr0,0,r4,0x2
- bne ..chk_133
- addis r6,0,SDTR_100@h /* SDTR1 value for 100Mhz */
- ori r6,r6,SDTR_100@l
- addis r7,0,RTR_100 /* RTR value for 100Mhz */
- b ..sdram_ok
-..chk_133:
- addis r6,0,0x0107 /* SDTR1 value for 133Mhz */
- ori r6,r6,0x4015
- addis r7,0,0x07F0 /* RTR value for 133Mhz */
-
-..sdram_ok:
- /*------------------------------------------------------------------- */
- /* Set SDTR1 */
- /*------------------------------------------------------------------- */
- addi r4,0,SDRAM0_TR
- mtdcr SDRAM0_CFGADDR,r4
- mtdcr SDRAM0_CFGDATA,r6
-
- /*------------------------------------------------------------------- */
- /* Set RTR */
- /*------------------------------------------------------------------- */
- addi r4,0,SDRAM0_RTR
- mtdcr SDRAM0_CFGADDR,r4
- mtdcr SDRAM0_CFGDATA,r7
-
- /*------------------------------------------------------------------- */
- /* Delay to ensure 200usec have elapsed since reset. Assume worst */
- /* case that the core is running 200Mhz: */
- /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
- /*------------------------------------------------------------------- */
- addis r3,0,0x0000
- ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
- mtctr r3
-..spinlp2:
- bdnz ..spinlp2 /* spin loop */
-
- /*------------------------------------------------------------------- */
- /* Set memory controller options reg, MCOPT1. */
- /* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */
- /* read/prefetch. */
- /*------------------------------------------------------------------- */
- addi r4,0,SDRAM0_CFG
- mtdcr SDRAM0_CFGADDR,r4
- addis r4,0,0x8080 /* set DC_EN=1 */
- ori r4,r4,0x0000
- mtdcr SDRAM0_CFGDATA,r4
-
- /*------------------------------------------------------------------- */
- /* Delay to ensure 10msec have elapsed since reset. This is */
- /* required for the MPC952 to stabalize. Assume worst */
- /* case that the core is running 200Mhz: */
- /* 200,000,000 (cycles/sec) X .010 (sec) = 0x1E8480 cycles */
- /* This delay should occur before accessing SDRAM. */
- /*------------------------------------------------------------------- */
- addis r3,0,0x001E
- ori r3,r3,0x8480 /* ensure 10msec have passed since reset */
- mtctr r3
-..spinlp3:
- bdnz ..spinlp3 /* spin loop */
-
-#else
-/*fixme: do SDRAM Autoconfig from EEPROM here */
-
-#endif
- mtlr r31 /* restore lr */
- blr
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o ../common/misc.o ../common/pci.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o \
../common/misc.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o ../common/misc.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o \
../common/misc.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o ../common/misc.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common/xilinx_jtag)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
# Objects for Xilinx JTAG programming (CPLD)
CPLD = ../common/xilinx_jtag/lenval.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o ../common/misc.o ../common/cmd_loadpci.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
COBJS += ../common/cmd_loadpci.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
# $(shell mkdir -p $(obj)../common/xilinx_jtag)
# endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
# Objects for Xilinx JTAG programming (CPLD)
# CPLD = ../common/xilinx_jtag/lenval.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../../Marvell/common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
SOBJS = misc.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- arch/powerpc/cpu/74xx_7xx/start.o (.text)
-
-/* store the environment in a seperate sector in the boot flash */
-/* . = env_offset; */
-/* common/env_embedded.o(.text) */
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o ../common/misc.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o cmd_dasa_sim.o eeprom.o ../common/pci.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
.resetvec 0xFFFFFFFC :
{
- *(.resetvec)
+ KEEP(*(.resetvec))
} = 0xffff
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/ppc4xx/start.o (.text)
+ arch/powerpc/cpu/ppc4xx/start.o (.text)
. = env_offset;
- common/env_embedded.o(.text)
+ common/env_embedded.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
$(shell mkdir -p $(obj)../common/xilinx_jtag)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
# Objects for Xilinx JTAG programming (CPLD)
CPLD = ../common/xilinx_jtag/lenval.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o ../common/misc.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS = init.o
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o \
../common/misc.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o \
../common/misc.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o ../common/misc.o cmd_ocrtc.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o ../common/misc.o cmd_pci405.o
SOBJS = writeibm.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
-# $(AR) $(ARFLAGS) $@ $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+# $(call cmd_link_o_target, $(OBJS))
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
# $(shell mkdir -p $(obj)../common/xilinx_jtag)
# endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
# Objects for Xilinx JTAG programming (CPLD)
# CPLD = ../common/xilinx_jtag/lenval.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o \
../common/misc.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common/xilinx_jtag)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
# Objects for Xilinx JTAG programming (CPLD)
CPLD = ../common/xilinx_jtag/lenval.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y = $(BOARD).o
COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o cmd_pmc440.o sdram.o fpga.o \
../common/cmd_loadpci.o
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o caddy.o
COBJS-$(CONFIG_PCI) += pci.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o \
../common/misc.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common/xilinx_jtag)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
# Objects for Xilinx JTAG programming (CPLD)
CPLD = ../common/xilinx_jtag/lenval.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o \
../common/misc.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := espt.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ net/libnet.o (.text*)
+ board/esteem192e/libesteem192e.o (.text*)
+ *(.text.*printf)
. = env_offset;
- common/env_embedded.o(.text)
+ common/env_embedded.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o phantom.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o multiverse.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
- arch/powerpc/cpu/mpc8xx/serial.o (.text)
- arch/powerpc/cpu/mpc8xx/cpu_init.o (.text)
- arch/powerpc/cpu/mpc8xx/speed.o (.text)
- common/dlmalloc.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ net/libnet.o (.text*)
+ arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
+ *(.text.*printf*)
. = env_offset;
- common/env_embedded.o(.text)
- *(.text)
- *(.got1)
+ common/env_embedded.o (.text*)
+
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += led.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := cpuat91.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := evb4510.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
SOBJS = misc.o
COBJS = $(BOARD).o flash.o serial.o memory.o pci.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
#########################################################################
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/74xx_7xx/start.o (.text)
-
-/* store the environment in a seperate sector in the boot flash */
-/* . = env_offset; */
-/* common/env_embedded.o(.text) */
+ arch/powerpc/cpu/74xx_7xx/start.o (.text*)
+ *(.text*)
- *(.text)
- *(.got1)
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/env_embedded.o (.ppcenv*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o lamp.o pcmcia.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
/*. = DEFINED(env_offset) ? env_offset : .;*/
- common/env_embedded.o (.ppcenv)
+ common/env_embedded.o (.ppcenv*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- arch/powerpc/lib/extable.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := a320evb.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)board/$(VENDOR)/common)
+$(shell mkdir -p $(obj)board/freescale/common)
endif
-LIB = $(obj)lib$(VENDOR).a
+LIB = $(obj)libfreescale.o
COBJS-$(CONFIG_FSL_CADMUS) += cadmus.o
COBJS-$(CONFIG_FSL_VIA) += cds_via.o
-COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o
COBJS-$(CONFIG_FSL_PIXIS) += pixis.o
COBJS-$(CONFIG_FSL_NGPIXIS) += ngpixis.o
COBJS-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/* the sector layout of our flash chips! XXX FIXME XXX */
arch/m68k/cpu/mcf52x2/start.o (.text)
- arch/m68k/cpu/mcf52x2/libmcf52x2.a (.text)
- arch/m68k/lib/libm68k.a (.text)
+ arch/m68k/cpu/mcf52x2/libmcf52x2.o (.text)
+ arch/m68k/lib/libm68k.o (.text)
common/dlmalloc.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/* the sector layout of our flash chips! XXX FIXME XXX */
arch/m68k/cpu/mcf5227x/start.o (.text)
- arch/m68k/cpu/mcf5227x/libmcf5227x.a (.text)
- arch/m68k/lib/libm68k.a (.text)
- lib/libgeneric.a (.text)
+ arch/m68k/cpu/mcf5227x/libmcf5227x.o (.text)
+ arch/m68k/lib/libm68k.o (.text)
+ lib/libgeneric.o (.text)
common/cmd_mem.o (.text)
common/main.o (.text)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
arch/m68k/cpu/mcf523x/cpu_init.o (.text)
arch/m68k/cpu/mcf523x/interrupts.o (.text)
arch/m68k/cpu/mcf523x/speed.o (.text)
- arch/m68k/lib/libm68k.a (.text)
+ arch/m68k/lib/libm68k.o (.text)
common/dlmalloc.o (.text)
common/cmd_bootm.o (.text)
common/cmd_flash.o (.text)
common/cmd_mem.o (.text)
common/console.o (.text)
common/main.o (.text)
- lib/libgeneric.a (.text)
+ lib/libgeneric.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.text)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
OUTPUT_ARCH(m68k)
/* Do we need any of these for elf?
__DYNAMIC = 0; */
-GROUP(libgcc.a)
+GROUP(libgcc.o)
SECTIONS
{
/* Read-only sections, merged into text segment: */
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/* the sector layout of our flash chips! XXX FIXME XXX */
arch/m68k/cpu/mcf532x/start.o (.text)
- arch/m68k/cpu/mcf532x/libmcf532x.a (.text)
- arch/m68k/lib/libm68k.a (.text)
+ arch/m68k/cpu/mcf532x/libmcf532x.o (.text)
+ arch/m68k/lib/libm68k.o (.text)
common/dlmalloc.o (.text)
lib/zlib.o (.text)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o nand.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o nand.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/* the sector layout of our flash chips! XXX FIXME XXX */
arch/m68k/cpu/mcf5445x/start.o (.text)
- arch/m68k/cpu/mcf5445x/libmcf5445x.a (.text)
- arch/m68k/lib/libm68k.a (.text)
+ arch/m68k/cpu/mcf5445x/libmcf5445x.o (.text)
+ arch/m68k/lib/libm68k.o (.text)
common/cmd_flash.o (.text)
common/dlmalloc.o (.text)
common/main.o (.text)
common/image.o (.text)
- lib/libgeneric.a (.text)
+ lib/libgeneric.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.text)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
$(shell mkdir -p $(OBJTREE)/board/freescale/common)
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o tsi108_init.o
SOBJS := asm_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o sdram.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o sdram.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o sdram.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-$(CONFIG_PCI) += pci.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-$(CONFIG_PCI) += pci.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-$(CONFIG_PCI) += pci.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-$(CONFIG_PCI) += pci.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-$(CONFIG_CMD_NAND) += nand.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-$(CONFIG_PCI) += pci.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-$(CONFIG_PCI) += pci.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += bcsr.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += bcsr.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-$(CONFIG_FSL_DDR2) += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += law.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
return 0;
}
-const char *board_hwconfig = "foo:bar=baz";
-const char *cpu_hwconfig = "foo:bar=baz";
-
phys_size_t
initdram(int board_type)
{
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := mx31ads.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
/* the sector layout of our flash chips! XXX FIXME XXX */
arch/arm/cpu/arm1136/start.o (.text)
- board/freescale/mx31ads/libmx31ads.a (.text)
- arch/arm/lib/libarm.a (.text)
- net/libnet.a (.text)
- drivers/mtd/libmtd.a (.text)
+ board/freescale/mx31ads/libmx31ads.o (.text)
+ arch/arm/lib/libarm.o (.text)
+ net/libnet.o (.text)
+ drivers/mtd/libmtd.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o(.text)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := mx31pdk.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := mx51evk.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
return 0;
}
-const char *board_hwconfig = "foo:bar=baz";
-const char *cpu_hwconfig = "foo:bar=baz";
-
phys_size_t initdram(int board_type)
{
phys_size_t dram_size = 0;
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o flash.o m88e6060.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o strataflash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := gcplus.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-$(CONFIG_IO) += io.o
COBJS-$(CONFIG_IOCON) += iocon.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)board/$(VENDOR)/common)
endif
-LIB = $(obj)lib$(VENDOR).a
+LIB = $(obj)lib$(VENDOR).o
COBJS-$(CONFIG_IO) += miiphybb.o
COBJS-$(CONFIG_IOCON) += osd.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
char *text;
if (argc < 5) {
- cmd_usage(cmdtp);
- return 1;
+ return cmd_usage(cmdtp);
}
x = simple_strtoul(argv[1], NULL, 16);
unsigned count = (argc > 4) ? simple_strtoul(argv[4], NULL, 16) : 1;
if ((argc < 4) || (strlen(argv[3]) % 4)) {
- cmd_usage(cmdtp);
- return 1;
+ return cmd_usage(cmdtp);
}
x = simple_strtoul(argv[1], NULL, 16);
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS =
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS =
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o beeper.o fpga.o ioport.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
* Linker command file for the GEN860T board when the environment is
* stored in flash memory.
*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* Read-only sections, merged into text segment:
*/
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- *(.text)
- *(.got1)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/*
* Read-write section, merged into data segment:
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data:
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
/*
* Linker command file for the GEN860T board.
*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* Read-only sections, merged into text segment:
*/
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- *(.text)
- *(.got1)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/*
* Read-write section, merged into data segment:
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ lib/libgeneric.o (.text*)
+ net/libnet.o (.text*)
+ arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
+ board/genietv/libgenietv.o (.text*)
+ arch/powerpc/lib/libpowerpc.o (.text*)
+ *(.text.do_load_serial*)
+ *(.text.do_mem_*)
+ *(.text.do_bootm*)
. = env_offset;
- common/env_embedded.o(.text)
- *(.text)
- *(.got1)
+ common/env_embedded.o (.text*)
+
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
}
. = ALIGN(256 * 1024);
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o ee_access.o
SOBJS = lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := gw8260.o flash.o
SOBJS :=
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ board/hermes/libhermes.o (.text*)
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
- arch/powerpc/lib/time.o (.text)
- arch/powerpc/lib/ticks.o (.text)
- arch/powerpc/lib/cache.o (.text)
- lib/crc32.o (.text)
. = env_offset;
- common/env_embedded.o(.text)
+ common/env_embedded.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o bsp.o eeprom.o fetch.o input.o env.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o pcmcia.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
-/*
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-*/
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
OUTPUT_ARCH(m68k)
/* Do we need any of these for elf?
__DYNAMIC = 0; */
-GROUP(libgcc.a)
+GROUP(libgcc.o)
SECTIONS
{
/* Read-only sections, merged into text segment: */
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
-COBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2005
- * Heiko Schocher, DENX Software Engineering, <hs@denx.de>
- *
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#undef DEBUG
-
-#include <common.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*-----------------------------------------------------------------------
- * Protection Flags:
- */
-#define FLAG_PROTECT_SET 0x01
-#define FLAG_PROTECT_CLEAR 0x02
-
-/* Board support for 1 or 2 flash devices */
-#undef FLASH_PORT_WIDTH32
-#undef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH8
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
-#elif FLASH_PORT_WIDTH32
-#define FLASH_PORT_WIDTH ulong
-#define FLASH_PORT_WIDTHV vu_long
-#else /* FLASH_PORT_WIDTH8 */
-#define FLASH_PORT_WIDTH uchar
-#define FLASH_PORT_WIDTHV vu_char
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPWV * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- unsigned long size_b0;
- int i;
- volatile immap_t * immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immr->im_memctl;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
- size_b0 = flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0 << 20);
- }
-
- memctl->memc_or0 = 0xff800060;
- memctl->memc_br0 = 0xff800801;
-
- flash_get_offsets (0xff800000, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- (void) flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[0]);
-#endif
-
- flash_info[0].size = size_b0;
-
- return (size_b0);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00020000);
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL:
- printf ("INTEL ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F320J3A:
- printf ("28F320J3A\n");
- break;
- case FLASH_28F640J3A:
- printf ("28F640J3A\n");
- break;
- case FLASH_28F128J3A:
- printf ("28F128J3A\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (FPWV * addr, flash_info_t * info)
-{
- FPW value;
-
- addr[0] = (FPW) 0x00900090;
-
- value = addr[0];
-
- debug ("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value);
-
- switch (value) {
- case (FPW) INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
- return (0); /* no or unknown flash */
- }
-
-#ifdef FLASH_PORT_WIDTH8
- value = addr[2]; /* device ID */
-#else
- value = addr[1]; /* device ID */
-#endif
-
- debug ("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value);
-
- switch (value) {
- case (FPW) INTEL_ID_28F320J3A:
- info->flash_id += FLASH_28F320J3A;
- info->sector_count = 32;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (FPW) INTEL_ID_28F640J3A:
- info->flash_id += FLASH_28F640J3A;
- info->sector_count = 64;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case (FPW) INTEL_ID_28F128J3A:
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x01000000;
- break; /* => 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- break;
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- ulong type, start, now, last;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_INTEL)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- start = get_timer (0);
- last = start;
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- FPWV *addr = (FPWV *) (info->start[sect]);
- FPW status;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- *addr = (FPW) 0x00500050; /* clear status register */
- *addr = (FPW) 0x00200020; /* erase setup */
- *addr = (FPW) 0x00D000D0; /* erase confirm */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- *addr = (FPW) 0x00B000B0; /* suspend erase */
- *addr = (FPW) 0x00FF00FF; /* reset to read mode */
- rcode = 1;
- break;
- }
-
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
- *addr = (FPW) 0x00FF00FF; /* reset to read mode */
- }
- }
- printf (" done\n");
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- FPW data;
-
- int i, l, rc, port_width;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
- wp = (addr & ~1);
- port_width = 2;
-#elif defined(FLASH_PORT_WIDTH32)
- wp = (addr & ~3);
- port_width = 4;
-#else
- wp = addr;
- port_width = 1;
-#endif
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < port_width && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_data (info, wp, data)) != 0) {
- return (rc);
- }
- wp += port_width;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= port_width) {
- data = 0;
- for (i = 0; i < port_width; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_data (info, wp, data)) != 0) {
- return (rc);
- }
- wp += port_width;
- cnt -= port_width;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_data (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, FPW data)
-{
- FPWV *addr = (FPWV *) dest;
- ulong status;
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- *addr = (FPW) 0x00400040; /* write setup */
- *addr = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- start = get_timer (0);
-
- while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (1);
- }
- }
-
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
-
- return (0);
-}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := impa7.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := imx31_phycore.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS = lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o inkadiag.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := innokom.o flash.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
- arch/powerpc/lib/time.o (.text)
- arch/powerpc/lib/ticks.o (.text)
-/**
- . = env_offset;
- common/env_embedded.o(.text)
-**/
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := igep0020.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
# (mem base + reserved)
# For use with external or internal boots.
-TEXT_BASE = 0x80008000
+CONFIG_SYS_TEXT_BASE = 0x80008000
#include <asm/io.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mem.h>
+#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-types.h>
}
#endif
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif
+
/*
* Routine: misc_init_r
* Description: Configure board specific parts
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := igep0030.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
# (mem base + reserved)
# For use with external or internal boots.
-TEXT_BASE = 0x80008000
+CONFIG_SYS_TEXT_BASE = 0x80008000
+
#include <twl4030.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
+#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-types.h>
return 0;
}
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif
+
/*
* Routine: misc_init_r
* Description: Configure board specific parts
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/env_embedded.o(.text)
- *(.text)
- *(.got1)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := ixdp425.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := jornada.o
SOBJS := setup.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
.globl lowlevel_init
lowlevel_init:
- /* set output and direction of pins */
- ldr r0, PPC_BASE
- ldr r1, pin_set_out
- str r1, [r0, #PPSR]
- ldr r1, pin_set_dir
- str r1, [r0, #PPDR]
+
+ /* this is required for flashing */
+ ldr r0, PPC_BASE
+ ldr r1, pin_set_out
+ str r1, [r0, #PPSR]
+ ldr r1, pin_set_dir
+ str r1, [r0, #PPDR]
/* Setting up the memory and stuff */
/***********************************/
ldr r3, [r2]
.endr
+ ldr r2, [r0, #MDCNFG]
+ orr r2, r2, #0x00000003
+ orr r2, r2, #0x00030000
+ str r2, [r0, #MDCNFG]
+
ldr r1, msc0
str r1, [r0, #MSC0]
ldr r1, msc1
str r1, [r0, #MSC2]
ldr r1, smcnfg
str r1, [r0, #SMCNFG]
- ldr r1, mdcnfg
- str r1, [r0, #MDCNFG]
ldr r1, mecr
str r1, [r0, #MECR]
- /* enable SDRAM */
- orr r1, r1, #0x00000001
- str r1, [r0, #MDCNFG]
-
mov pc, lr
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o sdram.o flash.o host_bridge.o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := tx25.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := kb9202.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o ../common/common.o ../common/keymile_hdlc_enet.o \
km8xx_hdlc_enet.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.ppcenv)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
*(.rodata)
*(.rodata1)
*(.rodata.str1.4)
- *(.eh_frame)
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o ../common/common.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS += $(BOARD).o ../common/common.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o ../common/common.o ../common/keymile_hdlc_enet.o \
mgcoge_hdlc_enet.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS = init.o
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o kup.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
-/*
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-*/
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
-/*
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-*/
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000, 2001
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ net/libnet.o (.text*)
+ arch/powerpc/lib/libpowerpc.o (.text*)
+ drivers/rtc/librtc.o (.text*)
. = env_offset;
- common/env_embedded.o(.text)
+ common/env_embedded.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := lart.o flash.o
SOBJS := flashasm.o lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
OBJS = $(BOARD).o ide.o hwctl.o avr.o
OBJS := $(addprefix $(obj),$(OBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := am3517evm.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
# (mem base + reserved)
# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80008000
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := imx27lite.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := imx31_litekit.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := zoom1.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
# (mem base + reserved)
# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80008000
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-y += debug_board.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
# (mem base + reserved)
# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80008000
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := flash.o lpc2292sodimm.o
SOBJTS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJTS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := lpd7a40x.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := lubbock.o flash.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o pcmcia.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/env_embedded.o(.text)
- *(.text)
- *(.got1)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o kbd.o sdram.o
SOBJS = init.o
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := m501sk.o eeprom.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
+++ /dev/null
-#
-# (C) Copyright 2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
#COBJS = $(BOARD).o flash.o pcmcia.o
COBJS = $(BOARD).o pcmcia.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
-
- common/env_embedded.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)board/$(VENDOR)/common)
endif
-LIB = $(obj)lib$(VENDOR).a
+LIB = $(obj)lib$(VENDOR).o
COBJS-y = mv_common.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o fpga.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o pci.o fpga.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
@mkimage -T script -C none -n M7_script -d bootscript $(obj)bootscript.img
clean:
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o fpga.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
@mkimage -T script -C none -n mvSMR_Script -d bootscript $(obj)bootscript.img
clean:
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the first two sectors (=8KB) of our S29GL flash chip */
- arch/powerpc/cpu/mpc5xxx/start.o (.text)
- arch/powerpc/cpu/mpc5xxx/traps.o (.text)
- lib/crc32.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
+ arch/powerpc/cpu/mpc5xxx/start.o (.text*)
+ arch/powerpc/cpu/mpc5xxx/traps.o (.text*)
+ board/matrix_vision/common/libmatrix_vision.o (.text*)
/* This is only needed to force failure if size of above code will ever */
/* increase and grow into reserved space. */
. = env_offset; /* ld error as soon as above ALIGN misplaces lc */
common/env_embedded.o (.ppcenv)
- *(.text)
- *(.got1)
+ *(.text*)
. = ALIGN(16);
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
+ *(.bss*)
+ *(.sbss*)
. = ALIGN(4);
}
_end = . ;
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o vpd.o pcmcia.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o lcd.o auto_update.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-y += ebi.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB := $(obj)lib$(BOARD).a
+LIB := $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)lib$(BOARD).a
+LIB := $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o serial.o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/ppc4xx/start.o (.text)
- board/ml2/init.o (.text)
- arch/powerpc/cpu/ppc4xx/kgdb.o (.text)
- arch/powerpc/cpu/ppc4xx/traps.o (.text)
- arch/powerpc/cpu/ppc4xx/interrupts.o (.text)
- arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text)
- arch/powerpc/cpu/ppc4xx/cpu_init.o (.text)
- arch/powerpc/cpu/ppc4xx/speed.o (.text)
- common/dlmalloc.o (.text)
- lib/crc32.o (.text)
- arch/powerpc/lib/extable.o (.text)
- lib/zlib.o (.text)
-
-/* . = env_offset;*/
-/* common/env_embedded.o(.text)*/
-
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
+ *(.data*)
+ *(.sdata*)
CONSTRUCTORS
}
_edata = .;
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := modnet50.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o m48t59y.o pci.o flash.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc824x/start.o (.text)
- arch/powerpc/lib/board.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
-
- *(.got1)
+ arch/powerpc/cpu/mpc824x/start.o (.text*)
+ *(.text*)
. = ALIGN(16);
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := mp2usb.o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o sdram.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += law.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o ../common/flash.o cmd_mip405.o ../common/pci.o \
../common/usb_uhci.o ../common/common_util.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := pati.o ../common/flash.o cmd_pati.o ../common/common_util.o
#### cmd_pati.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o \
../common/flash.o cmd_pip405.o ../common/pci.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := vcma9.o flash.o cmd_vcma9.o
COBJS += ../common/common_util.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := mpr2.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := ms7720se.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := ms7722se.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
#
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := ms7750se.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * (C) Copyright 2002
+ * (C) Copyright 2001-2007
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* MA 02111-1307 USA
*/
-/*
- * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
- */
-
OUTPUT_ARCH(powerpc)
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/74xx_7xx/start.o (.text)
+ arch/powerpc/cpu/mpc824x/start.o (.text*)
+ lib/libgeneric.o (.text*)
+ net/libnet.o (.text*)
+ drivers/pci/libpci.o (.text*)
+ arch/powerpc/cpu/mpc824x/libmpc824x.o (.text*)
+ board/mvblue/libmvblue.o (.text*)
+ arch/powerpc/lib/libpowerpc.o (.text*)
-/* store the environment in a seperate sector in the boot flash */
-/* . = env_offset; */
-/* common/env_embedded.o(.text) */
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/env_embedded.o (.ppcenv*)
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
+ *(.text*)
+ . = ALIGN(16);
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
+ . = (. + 0x0FFF) & 0xFFFFF000;
_erotext = .;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
- . = ALIGN(256);
+ . = ALIGN(4096);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
- . = ALIGN(256);
+ . = ALIGN(4096);
__init_end = .;
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := mx1ads.o syncflash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := mx1fs2.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o phone_console.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o \
../common/fixed_sdram.o \
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o \
sdram.o \
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $^
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o \
../common/fixed_sdram.o \
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := netstar.o
SOBJS := setup.o
$(obj)crcek.srec $(obj)crcek.bin $(obj)crcit
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
$(obj)eeprom_start.o:
echo "b eeprom" | $(CC) $(AFLAGS) -c -x assembler -o $@ -
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o dsp.o codec.o pcmcia.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := ns9750dev.o flash.o led.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/env_embedded.o(.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := overo.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
#include <asm/mach-types.h>
#include "overo.h"
+#define TWL4030_I2C_BUS 0
+#define EXPANSION_EEPROM_I2C_BUS 2
+#define EXPANSION_EEPROM_I2C_ADDRESS 0x51
+
+#define GUMSTIX_SUMMIT 0x01000200
+#define GUMSTIX_TOBI 0x02000200
+#define GUMSTIX_TOBI_DUO 0x03000200
+#define GUMSTIX_PALO35 0x04000200
+#define GUMSTIX_PALO43 0x05000200
+#define GUMSTIX_CHESTNUT43 0x06000200
+#define GUMSTIX_PINTO 0x07000200
+#define GUMSTIX_GALLOP43 0x08000200
+
+#define ETTUS_USRP_E 0x01000300
+
+#define GUMSTIX_NO_EEPROM 0xffffffff
+
+static struct {
+ unsigned int device_vendor;
+ unsigned char revision;
+ unsigned char content;
+ char fab_revision[8];
+ char env_var[16];
+ char env_setting[64];
+} expansion_config;
+
#if defined(CONFIG_CMD_NET)
static void setup_net_chip(void);
#endif
return sdio_direct;
}
+/*
+ * Routine: get_expansion_id
+ * Description: This function checks for expansion board by checking I2C
+ * bus 2 for the availability of an AT24C01B serial EEPROM.
+ * returns the device_vendor field from the EEPROM
+ */
+unsigned int get_expansion_id(void)
+{
+ i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
+
+ /* return GUMSTIX_NO_EEPROM if eeprom doesn't respond */
+ if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
+ i2c_set_bus_num(TWL4030_I2C_BUS);
+ return GUMSTIX_NO_EEPROM;
+ }
+
+ /* read configuration data */
+ i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
+ sizeof(expansion_config));
+
+ i2c_set_bus_num(TWL4030_I2C_BUS);
+
+ return expansion_config.device_vendor;
+}
+
/*
* Routine: misc_init_r
* Description: Configure board specific parts
printf("Unable to detect mmc2 connection type\n");
}
+ switch (get_expansion_id()) {
+ case GUMSTIX_SUMMIT:
+ printf("Recognized Summit expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ setenv("defaultdisplay", "dvi");
+ break;
+ case GUMSTIX_TOBI:
+ printf("Recognized Tobi expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ setenv("defaultdisplay", "dvi");
+ break;
+ case GUMSTIX_TOBI_DUO:
+ printf("Recognized Tobi Duo expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ break;
+ case GUMSTIX_PALO35:
+ printf("Recognized Palo35 expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ setenv("defaultdisplay", "lcd35");
+ break;
+ case GUMSTIX_PALO43:
+ printf("Recognized Palo43 expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ setenv("defaultdisplay", "lcd43");
+ break;
+ case GUMSTIX_CHESTNUT43:
+ printf("Recognized Chestnut43 expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ setenv("defaultdisplay", "lcd43");
+ break;
+ case GUMSTIX_PINTO:
+ printf("Recognized Pinto expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ break;
+ case GUMSTIX_GALLOP43:
+ printf("Recognized Gallop43 expansion board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ setenv("defaultdisplay", "lcd43");
+ break;
+ case ETTUS_USRP_E:
+ printf("Recognized Ettus Research USRP-E (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ MUX_USRP_E();
+ setenv("defaultdisplay", "dvi");
+ break;
+ case GUMSTIX_NO_EEPROM:
+ printf("No EEPROM on expansion board\n");
+ break;
+ default:
+ printf("Unrecognized expansion board\n");
+ }
+
+ if (expansion_config.content == 1)
+ setenv(expansion_config.env_var, expansion_config.env_setting);
+
dieid_num_r();
return 0;
MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) /*GPIO_128*/\
MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) /*GPIO_129*/
+#define MUX_USRP_E() \
+ MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M4)) /*GPIO_173 */\
+ MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M4)) /*GPIO_175 */\
+
#endif
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := palmld.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := palmtc.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := pandora.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
+++ /dev/null
-#
-# (C) Copyright 2006
-# Texas Instruments, <www.ti.com>
-#
-# Pandora uses OMAP3 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS = lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o cpc710_pci.o flash.o sconsole.o \
fpga_serial.o pcippc2_fpga.o cpc710_init_ram.o i2c.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := pleb2.o flash.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += law.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += law.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o cmd_pn62.o misc.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
SOBJS := init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- arch/powerpc/cpu/74xx_7xx/start.o (.text)
-
-/* store the environment in a seperate sector in the boot flash */
-/* . = env_offset; */
-/* common/env_embedded.o(.text) */
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := ppmc8260.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o fpga.o nand.o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../../Marvell/common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
SOBJS = misc.o
COBJS = $(BOARD).o mpsc.o mv_eth.o pci.o sdram_init.o serial.o \
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- arch/powerpc/cpu/74xx_7xx/start.o (.text)
-
-/* store the environment in a seperate sector in the boot flash */
-/* . = env_offset; */
-/* common/env_embedded.o(.text) */
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := flash.o pdnb3.o nand.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COMOBJS := ../common/AMDLV065D.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
$(shell mkdir -p $(obj)../common)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COMOBJS := ../common/AMDLV065D.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o sconsole.o
SOBJS = lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := pxa_idp.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS = lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o nand.o
SOBJS =
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o fpga.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
-/* XXX ?
- . = env_offset;
-*/
- common/env_embedded.o(.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o pcmcia.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/cpu_init.o (.text)
- arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
-/***
- . = env_offset;
- common/env_embedded.o (.text)
-***/
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o kbd.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+
+ lib/libgeneric.o (.text*)
+ net/libnet.o (.text*)
+ arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
+ arch/powerpc/lib/libpowerpc.o (.text*)
. = env_offset;
- common/env_embedded.o(.text)
+ common/env_embedded.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := migo_r.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := ap325rxa.o cpld-ap325rxa.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
#
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := r2dplus.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := r7780mp.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = lib$(BOARD).o
OBJS := rsk7203.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := sh7763rdp.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := sh7785lcr.o selfcheck.o rtl8169_mac.o
SOBJS := lowlevel_init.o
$(LIB): $(obj).depend $(COBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(COBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(COBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
-/* XXX ?
- . = env_offset;
-*/
- common/env_embedded.o(.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += led.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += pm9263.o
COBJS-y += led.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += pm9g45.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := rpxsuper.o flash.o mii_phy.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := rsdproto.o flash.o
SOBJS := flash_asm.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := sacsng.o flash.o clkinit.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := goni.o onenand.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(SOBJS) $(OBJS)
- $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS)
+ $(call cmd_link_o_target, $(SOBJS) $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
}
int dram_init(void)
+{
+ gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE +
+ PHYS_SDRAM_3_SIZE;
+
+ return 0;
+}
+
+void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-
- return 0;
}
#ifdef CONFIG_DISPLAY_BOARDINFO
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := smdk2400.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := smdk2410.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := smdk6400.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(SOBJS) $(OBJS)
- $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS)
+ $(call cmd_link_o_target, $(SOBJS) $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := smdkc100.o
COBJS-$(CONFIG_SAMSUNG_ONENAND) += onenand.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(SOBJS) $(OBJS)
- $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS)
+ $(call cmd_link_o_target, $(SOBJS) $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
- PHYS_SDRAM_1_SIZE);
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
return 0;
}
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
# TBS: end debugging
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
../common/sb_common.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
# TBS: end debugging
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
../common/sb_common.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2001-2007
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
+ arch/powerpc/cpu/mpc824x/start.o (.text*)
+ *(.text.v*printf)
- common/env_embedded.o(.text)
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/env_embedded.o (.ppcenv*)
- *(.text)
- *(.got1)
+ *(.text*)
+ . = ALIGN(16);
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
+ . = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
+ . = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
__init_end = .;
__bss_start = .;
- .bss :
+ .bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
+ . = ALIGN(4);
}
_end = . ;
PROVIDE (end = .);
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := sbc2410x.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o strataflash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
/* ------------------------------------------------------------------------- */
-phys_size_t initdram (int board_type)
-{
- return spd_sdram ();
-}
-
-/* ------------------------------------------------------------------------- */
-
int testdram (void)
{
/* TODO: XXX XXX XXX */
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := sbc8260.o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-$(CONFIG_PCI) += pci.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += law.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += law.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += law.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o sc3nand.o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := scb9328.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := shannon.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o sdram.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o atm.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000, 2001, 2002
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
- arch/powerpc/lib/time.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
+ net/libnet.o (.text*)
+ drivers/rtc/librtc.o (.text*)
+
. = env_offset;
- common/env_embedded.o(.text)
+ common/env_embedded.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
$(shell mkdir -p $(obj)../../tqc/tqm8xx)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = scm.o flash.o fpga_scm.o ../common/fpga.o \
../../tqc/tqm8xx/load_sernum_ethaddr.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := flash.o smn42.o
SOBJTS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJTS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/env_embedded.o(.text)
- *(.text)
- *(.got1)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.ppcenv)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.ppcenv)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
#
COBJS-y += $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o hpi.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.ppcenv)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/env_embedded.o(.text)
- *(.text)
- *(.got1)
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ net/libnet.o (.text*)
+ arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
+ board/spd8xx/libspd8xx.o (.text*)
+ *(.text.v*printf)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/env_embedded.o (.ppcenv*)
+
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
$(shell mkdir -p $(obj)board/$(VENDOR)/common)
endif
-LIB = $(obj)lib$(VENDOR).a
+LIB = $(obj)lib$(VENDOR).o
COBJS := spr_misc.o
SOBJS := spr_lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := spear300.o
SOBJS :=
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := spear310.o
SOBJS :=
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := spear320.o
SOBJS :=
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := spear600.o
SOBJS :=
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := nhk8815.o
SOBJS := platform.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += law.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += law.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ lib/libgeneric.o (.text*)
+ net/libnet.o (.text*)
+ arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
+ arch/powerpc/lib/libpowerpc.o (.text*)
+ board/svm_sc8xx/libsvm_sc8xx.o (.text*)
+ *(.text.*printf)
+ *(.text.do_mem_*)
+ *(.text.flash*)
+ *(.text.run_command)
+ *(.text.main_loop)
+ *(.text.srec_decode)
. = env_offset;
- common/env_embedded.o (.ppcenv)
+ common/env_embedded.o (.ppcenv*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := sx1.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += jadecpu.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+all: $(LIB) $(SOBJS)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o vr4131-pci.o
SOBJS = lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y := $(BOARD).o gpio_cfi_flash.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := beagle.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
#include <asm/mach-types.h>
#include "beagle.h"
+#define TWL4030_I2C_BUS 0
+#define EXPANSION_EEPROM_I2C_BUS 1
+#define EXPANSION_EEPROM_I2C_ADDRESS 0x50
+
+#define TINCANTOOLS_ZIPPY 0x01000100
+#define TINCANTOOLS_ZIPPY2 0x02000100
+#define TINCANTOOLS_TRAINER 0x04000100
+#define TINCANTOOLS_SHOWDOG 0x03000100
+#define KBADC_BEAGLEFPGA 0x01000600
+
+#define BEAGLE_NO_EEPROM 0xffffffff
+
+static struct {
+ unsigned int device_vendor;
+ unsigned char revision;
+ unsigned char content;
+ char fab_revision[8];
+ char env_var[16];
+ char env_setting[64];
+} expansion_config;
+
/*
* Routine: board_init
* Description: Early hardware init.
return revision;
}
+/*
+ * Routine: get_expansion_id
+ * Description: This function checks for expansion board by checking I2C
+ * bus 1 for the availability of an AT24C01B serial EEPROM.
+ * returns the device_vendor field from the EEPROM
+ */
+unsigned int get_expansion_id(void)
+{
+ i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
+
+ /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */
+ if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
+ i2c_set_bus_num(TWL4030_I2C_BUS);
+ return BEAGLE_NO_EEPROM;
+ }
+
+ /* read configuration data */
+ i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
+ sizeof(expansion_config));
+
+ i2c_set_bus_num(TWL4030_I2C_BUS);
+
+ return expansion_config.device_vendor;
+}
+
/*
* Routine: misc_init_r
* Description: Configure board specific parts
printf("Beagle unknown 0x%02x\n", get_board_revision());
}
+ switch (get_expansion_id()) {
+ case TINCANTOOLS_ZIPPY:
+ printf("Recognized Tincantools Zippy board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ MUX_TINCANTOOLS_ZIPPY();
+ setenv("buddy", "zippy");
+ break;
+ case TINCANTOOLS_ZIPPY2:
+ printf("Recognized Tincantools Zippy2 board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ MUX_TINCANTOOLS_ZIPPY();
+ setenv("buddy", "zippy2");
+ break;
+ case TINCANTOOLS_TRAINER:
+ printf("Recognized Tincantools Trainer board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ MUX_TINCANTOOLS_ZIPPY();
+ MUX_TINCANTOOLS_TRAINER();
+ setenv("buddy", "trainer");
+ break;
+ case TINCANTOOLS_SHOWDOG:
+ printf("Recognized Tincantools Showdow board (rev %d %s)\n",
+ expansion_config.revision,
+ expansion_config.fab_revision);
+ /* Place holder for DSS2 definition for showdog lcd */
+ setenv("defaultdisplay", "showdoglcd");
+ setenv("buddy", "showdog");
+ break;
+ case KBADC_BEAGLEFPGA:
+ printf("Recognized KBADC Beagle FPGA board\n");
+ MUX_KBADC_BEAGLEFPGA();
+ setenv("buddy", "beaglefpga");
+ break;
+ case BEAGLE_NO_EEPROM:
+ printf("No EEPROM on expansion board\n");
+ setenv("buddy", "none");
+ break;
+ default:
+ printf("Unrecognized expansion board: %x\n",
+ expansion_config.device_vendor);
+ setenv("buddy", "unknown");
+ }
+
+ if (expansion_config.content == 1)
+ setenv(expansion_config.env_var, expansion_config.env_setting);
+
twl4030_power_init();
twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\
MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\
MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\
- MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4)) /*GPIO_168*/\
- MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\
+ MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\
+ MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\
MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\
MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\
MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\
MUX_VAL(CP(SYS_BOOT5), (IDIS | PTD | DIS | M3)) /*DSS_DATA22*/\
MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M3)) /*DSS_DATA23*/
+#define MUX_TINCANTOOLS_ZIPPY() \
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\
+ MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\
+ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\
+ MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTU | EN | M1)) /*MCSPI4_CLK*/\
+ MUX_VAL(CP(MCBSP1_FSR), (IEN | PTU | EN | M4)) /*GPIO_157*/\
+ MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | EN | M1)) /*MCSPI4_SIMO*/\
+ MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M1)) /*MCSPI4_SOMI*/\
+ MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | EN | M1)) /*MCSPI4_CS0*/\
+ MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_162*/\
+ MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\
+ MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\
+ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/
+
+#define MUX_TINCANTOOLS_TRAINER() \
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\
+ MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\
+ MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\
+ MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\
+ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\
+ MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4)) /*GPIO_140*/\
+ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTU | EN | M4)) /*GPIO_141*/\
+ MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTU | EN | M4)) /*GPIO_162*/
+
+#define MUX_KBADC_BEAGLEFPGA() \
+ MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTU | DIS | M1)) /*MCSPI4_CLK*/\
+ MUX_VAL(CP(MCBSP1_DX), (IDIS | PTU | DIS | M1)) /*MCSPI4_SIMO*/\
+ MUX_VAL(CP(MCBSP1_DR), (IEN | PTU | EN | M1)) /*MCSPI4_SOMI*/\
+ MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTU | DIS | M1)) /*MCSPI4_CS0*/
+
#endif
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := evm.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
# (mem base + reserved)
# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80008000
static void omap3_evm_get_revision(void)
{
+#if defined(CONFIG_CMD_NET)
+ /*
+ * Board revision can be ascertained only by identifying
+ * the Ethernet chipset.
+ */
unsigned int smsc_id;
/* Ethernet PHY ID is stored at ID_REV register */
default:
omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
}
+#else
+#if defined(CONFIG_STATIC_BOARD_REV)
+ /*
+ * Look for static defintion of the board revision
+ */
+ omap3_evm_version = CONFIG_STATIC_BOARD_REV;
+#else
+ /*
+ * Fallback to the default above.
+ */
+ omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
+#endif
+#endif /* CONFIG_CMD_NET */
}
+#ifdef CONFIG_USB_OMAP3
/*
* MUSB port on OMAP3EVM Rev >= E requires extvbus programming.
*/
return retval;
}
+#endif
/*
* Routine: board_init
#if defined(CONFIG_CMD_NET)
setup_net_chip();
#endif
+ omap3_evm_get_revision();
dieid_num_r();
writel(GPIO0, &gpio3_base->cleardataout);
udelay(1);
writel(GPIO0, &gpio3_base->setdataout);
-
- /* determine omap3evm revision */
- omap3_evm_get_revision();
}
int board_eth_init(bd_t *bis)
u8 get_omap3_evm_rev(void);
+#if defined(CONFIG_CMD_NET)
static void setup_net_chip(void);
+#endif
/*
* IEN - Input Enable
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := omap1510innovator.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := omap1610innovator.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := omap2420h4.o mem.o sys_info.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := omap5912osk.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := omap730p2.o flash.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := panda.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := sdp.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
# (mem base + reserved)
# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80008000
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := sdp.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS += sdb_board.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := devkit8000.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
+++ /dev/null
-#
-# (C) Copyright 2006
-# Texas Instruments, <www.ti.com>
-#
-# (C) Copyright 2009
-# Frederik Kriewitz <frederik@kriewitz.eu>
-#
-# DevKit8000 uses OMAP3 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o sdram.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o cmd_stk52xx.o cmd_tb5200.o cam5200_flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
{
volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
- volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
+ ulong *datap = &data;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 =
+ (volatile CONFIG_SYS_FLASH_WORD_SIZE *)datap;
ulong start;
int i, flag;
{
volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
- volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = (CONFIG_SYS_FLASH_WORD_SIZE *) & data;
+ ulong *datap = &data;
+ volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 =
+ (volatile CONFIG_SYS_FLASH_WORD_SIZE *)datap;
ulong start;
int i;
$(shell mkdir -p $(obj)../tqm8xx/)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o ../tqm8xx/load_sernum_ethaddr.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
$(shell mkdir -p $(obj)../tqm8xx/)
endif
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o ../tqm8xx/load_sernum_ethaddr.o nand.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-$(CONFIG_PCI) += pci.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += sdram.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o load_sernum_ethaddr.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- arch/powerpc/lib/cache.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*)
+ arch/powerpc/lib/libpowerpc.o (.text*)
+ board/tqc/tqm8xx/libtqm8xx.o (.text*)
+ disk/libdisk.o (.text*)
+ drivers/net/libnet.o (.text*)
+ drivers/pcmcia/libpcmcia.o (.text*)
+ drivers/rtc/librtc.o (.text*)
+ drivers/misc/libmisc.o (.text*)
+ *(.text.print_buffer)
+ *(.text.print_size)
. = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.ppcenv)
+ common/env_embedded.o (.ppcenv*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := trab.o flash.o vfd.o cmd_trab.o memory.o tsc2000.o auto_update.o
SOBJS := lowlevel_init.o
all: $(LIB) $(obj)trab_fkt.srec $(obj)trab_fkt.bin
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
$(obj)trab_fkt.srec: $(OBJS_FKT) $(LIB)
$(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e trab_fkt $^ $(LIB) \
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := conxs.o eeprom.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := vision2.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
/*
- * (C) Copyright 2003
+ * (C) Copyright 2003-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/cpu/mpc8xx/traps.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
- arch/powerpc/lib/cache.o (.text)
- arch/powerpc/lib/time.o (.text)
-
-/*
- . = env_offset;
-*/
- common/env_embedded.o (.ppcenv)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o ethaddr.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := voiceblue.o
SOBJS := setup.o
all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
$(obj)eeprom_start.o:
echo "b eeprom" | $(CC) $(AFLAGS) -c -x assembler -o $@ -
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := vpac270.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o fpga.o fsboot.o post2.o vpd.o cmd_vpd.o \
watchdog.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o flash.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
*/
OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
+ arch/powerpc/cpu/mpc8xx/start.o (.text*)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ net/libnet.o (.text*)
+ board/westel/amx860/libamx860.o (.text*)
+ *(.text.*printf)
. = env_offset;
- common/env_embedded.o(.text)
+ common/env_embedded.o (.text*)
- *(.text)
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ KEEP(*(.got))
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss (NOLOAD) :
{
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.bss*)
+ *(.sbss*)
*(COMMON)
. = ALIGN(4);
}
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := xaeniax.o flash.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
$(shell mkdir -p $(obj)board/$(VENDOR)/common)
endif
-LIB = $(obj)lib$(VENDOR).a
+LIB = $(obj)lib$(VENDOR).o
COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_8xxx_pci.o
COBJS-$(CONFIG_MPC8572) += fsl_8xxx_clk.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS = init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS) $(SOBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
CFLAGS += $(INCS)
HOSTCFLAGS += $(INCS)
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS += ../../xilinx/ppc405-generic/xilinx_ppc405_generic.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
CFLAGS += $(INCS)
HOSTCFLAGS += $(INCS)
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS += ../../xilinx/ppc440-generic/xilinx_ppc440_generic.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $^
+ $(call cmd_link_o_target, $^)
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := xm250.o flash.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS = $(BOARD).o update.o
SOBJS =
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := zipitz2.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
clean:
rm -f $(SOBJS) $(OBJS)
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).o
COBJS := zylonite.o nand.o
SOBJS := lowlevel_init.o
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
clean:
rm -f $(SOBJS) $(OBJS)
# #define CONFIG_HAS_BAR 1
# #define CONFIG_BAZ 64
#
+# The list should be ordered according to the following fields,
+# from most to least significant:
+#
+# ARCH, CPU, SoC, Vendor, Target
+#
# To keep the list sorted, use something like
+# :.,$! sort -bdf -k2,2 -k3,3 -k6,6 -k5,5 -k1,1
#
-# :.,$! sort -f -k2,2 -k3,3 -k6,6 -k5,5 -k1,1
+# To reformat the list, use something like
+# :.,$! column -t
#
-# Target ARCH CPU Board name Vendor SoC Options
-###############################################################################################
+# Target ARCH CPU Board name Vendor SoC Options
+###########################################################################################################
-qong arm arm1136 - davedenx mx31
-mx31ads arm arm1136 - freescale mx31
-ep7312 arm arm720t
-impa7 arm arm720t
-SMN42 arm arm720t - siemens lpc2292
-evb4510 arm arm720t - - s3c4510b
-a320evb arm arm920t - faraday a320
-cmc_pu2 arm arm920t - - at91rm9200
-csb637 arm arm920t - - at91rm9200
-kb9202 arm arm920t - - at91rm9200
-m501sk arm arm920t - - at91rm9200
-mp2usb arm arm920t - - at91rm9200
-mx1ads arm arm920t - - imx
-mx1fs2 arm arm920t - - imx
-scb9328 arm arm920t - - imx
-cm4008 arm arm920t - - ks8695
-cm41xx arm arm920t - - ks8695
-VCMA9 arm arm920t vcma9 mpl s3c24x0
-netstar arm arm925t
-meesc arm arm926ejs - esd at91
-otc570 arm arm926ejs - esd at91
-pm9261 arm arm926ejs - ronetix at91
-pm9263 arm arm926ejs - ronetix at91
-suen3 arm arm926ejs km_arm keymile kirkwood
-rd6281a arm arm926ejs - Marvell kirkwood
-jadecpu arm arm926ejs jadecpu syteco mb86r0x
-mx51evk arm armv7 mx51evk freescale mx5
-vision2 arm armv7 vision2 ttcontrol mx5
-actux1 arm ixp
-actux2 arm ixp
-actux3 arm ixp
-actux4 arm ixp
-ixdp425 arm ixp
-balloon3 arm pxa
-cerf250 arm pxa
-cradle arm pxa
-csb226 arm pxa
-innokom arm pxa
-lubbock arm pxa
-palmld arm pxa
-palmtc arm pxa
-pleb2 arm pxa
-polaris arm pxa trizepsiv - - trizepsiv:POLARIS
-trizepsiv arm pxa
-vpac270_nor_128 arm pxa vpac270 - - vpac270:NOR,RAM_128M
-vpac270_nor_256 arm pxa vpac270 - - vpac270:NOR,RAM_256M
-vpac270_ond_256 arm pxa vpac270 - - vpac270:ONENAND,RAM_256M
-xaeniax arm pxa
-xm250 arm pxa
-zipitz2 arm pxa
-B2 arm s3c44b0 - dave
-assabet arm sa1100
-dnp1110 arm sa1100
-gcplus arm sa1100
-lart arm sa1100
-shannon arm sa1100
-jornada arm sa1100
-mimc200 avr32 at32ap - mimc at32ap700x
-ip04 blackfin blackfin
-eNET i386 i386 - - sc520
-idmr m68k mcf52x2
-TASREG m68k mcf52x2 tasreg esd
-M5272C3 m68k mcf52x2 m5272c3 freescale
-EP2500 m68k mcf52x2 ep2500 Mercury
-purple mips mips
-tb0229 mips mips
-PCI5441 nios2 nios2 pci5441 psyent
-PK1C20 nios2 nios2 pk1c20 psyent
-P3G4 powerpc 74xx_7xx evb64260
-PCIPPC2 powerpc 74xx_7xx pcippc2
-PCIPPC6 powerpc 74xx_7xx pcippc2
-ppmc7xx powerpc 74xx_7xx
-ZUMA powerpc 74xx_7xx evb64260
-BAB7xx powerpc 74xx_7xx bab7xx eltec
-ELPPC powerpc 74xx_7xx elppc eltec
-CPCI750 powerpc 74xx_7xx cpci750 esd
-DB64360 powerpc 74xx_7xx db64360 Marvell
-DB64460 powerpc 74xx_7xx db64460 Marvell
-p3m7448 powerpc 74xx_7xx p3mx prodrive - p3mx:P3M7448
-p3m750 powerpc 74xx_7xx p3mx prodrive - p3mx:P3M750
-aria powerpc mpc512x - davedenx
-PATI powerpc mpc5xx pati mpl
-a4m072 powerpc mpc5xxx a4m072
-BC3450 powerpc mpc5xxx bc3450
-canmb powerpc mpc5xxx
-cm5200 powerpc mpc5xxx
-inka4x0 powerpc mpc5xxx
-ipek01 powerpc mpc5xxx
-jupiter powerpc mpc5xxx
-munices powerpc mpc5xxx
-o2dnt powerpc mpc5xxx
-PM520 powerpc mpc5xxx pm520
-v38b powerpc mpc5xxx
-pf5200 powerpc mpc5xxx - esd
-hmi1001 powerpc mpc5xxx - manroland
-mucmc52 powerpc mpc5xxx - manroland
-uc101 powerpc mpc5xxx - manroland
-MVSMR powerpc mpc5xxx mvsmr matrix_vision
-aev powerpc mpc5xxx tqm5200 tqc
-TB5200 powerpc mpc5xxx tqm5200 tqc
-lite5200b powerpc mpc5xxx icecube - - IceCube:MPC5200_DDR,LITE5200B
-lite5200b_PM powerpc mpc5xxx icecube - - IceCube:MPC5200_DDR,LITE5200B,LITE5200B_PM
-mcc200 powerpc mpc5xxx mcc200 - - mcc200
-mcc200_COM12 powerpc mpc5xxx mcc200 - - mcc200:CONSOLE_COM12
-mcc200_highboot powerpc mpc5xxx mcc200 - - mcc200:SYS_TEXT_BASE=0xFFF00000
-mcc200_SDRAM powerpc mpc5xxx mcc200 - - mcc200:MCC200_SDRAM
-prs200 powerpc mpc5xxx mcc200 - - mcc200:PRS200,MCC200_SDRAM
-prs200_DDR powerpc mpc5xxx mcc200 - - mcc200:PRS200
-prs200_highboot powerpc mpc5xxx mcc200 - - mcc200:PRS200,SYS_TEXT_BASE=0xFFF00000,MCC200_SDRAM
-TOP5200 powerpc mpc5xxx top5200 emk - TOP5200:TOP5200
-pcm030 powerpc mpc5xxx pcm030 phytec - pcm030
-cam5200 powerpc mpc5xxx tqm5200 tqc - TQM5200:CAM5200,TQM5200S,TQM5200_B
-fo300 powerpc mpc5xxx tqm5200 tqc - TQM5200:FO300
-MiniFAP powerpc mpc5xxx tqm5200 tqc - TQM5200:MINIFAP
-TQM5200 powerpc mpc5xxx tqm5200 tqc - TQM5200:
-MVBC_P powerpc mpc5xxx mvbc_p matrix_vision - MVBC_P:MVBC_P
-sorcery powerpc mpc8220
-A3000 powerpc mpc824x a3000
-barco powerpc mpc824x
-BMW powerpc mpc824x bmw
-CU824 powerpc mpc824x cu824
-eXalion powerpc mpc824x eXalion
-MOUSSE powerpc mpc824x mousse
-MUSENKI powerpc mpc824x musenki
-MVBLUE powerpc mpc824x mvblue
-OXC powerpc mpc824x oxc
-PN62 powerpc mpc824x pn62
-sbc8240 powerpc mpc824x
-utx8245 powerpc mpc824x
-debris powerpc mpc824x - etin
-kvme080 powerpc mpc824x - etin
-CPC45 powerpc mpc824x cpc45 - - CPC45
-atc powerpc mpc8260
-ep8248 powerpc mpc8260 ep8248
-ep8260 powerpc mpc8260
-ep82xxm powerpc mpc8260
-gw8260 powerpc mpc8260
-hymod powerpc mpc8260
-IDS8247 powerpc mpc8260 ids8247
-ISPAN powerpc mpc8260 ispan
-sacsng powerpc mpc8260
-sbc8260 powerpc mpc8260
-ZPC1900 powerpc mpc8260 zpc1900
-mgcoge powerpc mpc8260 - keymile
-SCM powerpc mpc8260 - siemens
-TQM8272 powerpc mpc8260 tqm8272 tqc
-CPU86 powerpc mpc8260 cpu86 - - CPU86
-CPU87 powerpc mpc8260 cpu87 - - CPU87
-PM825 powerpc mpc8260 pm826 - - PM826:PCI,SYS_TEXT_BASE=0xFF000000
-PM826 powerpc mpc8260 pm826 - - PM826:SYS_TEXT_BASE=0xFF000000
-PM828 powerpc mpc8260 pm828 - - PM828
-ep8248E powerpc mpc8260 ep8248 - - ep8248
-Rattler powerpc mpc8260 rattler - - Rattler
-PQ2FADS powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS
-ve8313 powerpc mpc83xx ve8313
-kmeter1 powerpc mpc83xx kmeter1 keymile
-MVBLM7 powerpc mpc83xx mvblm7 matrix_vision
-TQM834x powerpc mpc83xx tqm834x tqc
-sbc8349 powerpc mpc83xx sbc8349 - - sbc8349
-caddy2 powerpc mpc83xx vme8349 esd - vme8349:CADDY2
-vme8349 powerpc mpc83xx vme8349 esd - vme8349
-PM854 powerpc mpc85xx pm854
-PM856 powerpc mpc85xx pm856
-P1022DS powerpc mpc85xx p1022ds freescale
-P2020DS powerpc mpc85xx p2020ds freescale
-stxgp3 powerpc mpc85xx stxgp3 stx
-P4080DS powerpc mpc85xx corenet_ds freescale
-sbc8540 powerpc mpc85xx sbc8560 - - SBC8540
-sbc8548 powerpc mpc85xx sbc8548 - - sbc8548
-sbc8560 powerpc mpc85xx sbc8560 - - sbc8560
-stxssa powerpc mpc85xx stxssa stx - stxssa
-TQM8540 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8540,TQM8540=y,HOSTNAME=tqm8540,BOARDNAME="TQM8540"
-TQM8541 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8541,TQM8541=y,HOSTNAME=tqm8541,BOARDNAME="TQM8541"
-TQM8548 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8548,TQM8548=y,HOSTNAME=tqm8548,BOARDNAME="TQM8548"
-TQM8555 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8555,TQM8555=y,HOSTNAME=tqm8555,BOARDNAME="TQM8555"
-TQM8560 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8560,TQM8560=y,HOSTNAME=tqm8560,BOARDNAME="TQM8560"
-Adder powerpc mpc8xx adder
-ADS860 powerpc mpc8xx fads
-c2mon powerpc mpc8xx
-EP88x powerpc mpc8xx ep88x
-ETX094 powerpc mpc8xx etx094
-FADS823 powerpc mpc8xx fads
-FLAGADM powerpc mpc8xx flagadm
-GEN860T powerpc mpc8xx gen860t
-GENIETV powerpc mpc8xx genietv
-hermes powerpc mpc8xx
-ICU862 powerpc mpc8xx icu862
-IP860 powerpc mpc8xx ip860
-LANTEC powerpc mpc8xx lantec
-lwmon powerpc mpc8xx
-MBX powerpc mpc8xx mbx8xx
-MBX860T powerpc mpc8xx mbx8xx
-NX823 powerpc mpc8xx nx823
-quantum powerpc mpc8xx
-R360MPI powerpc mpc8xx r360mpi
-RBC823 powerpc mpc8xx rbc823
-rmu powerpc mpc8xx
-RPXlite powerpc mpc8xx
-spc1920 powerpc mpc8xx
-v37 powerpc mpc8xx
-MHPC powerpc mpc8xx mhpc eltec
-TOP860 powerpc mpc8xx top860 emk
-kmsupx4 powerpc mpc8xx km8xx keymile
-mgsuvd powerpc mpc8xx km8xx keymile
-KUP4K powerpc mpc8xx kup4k kup
-KUP4X powerpc mpc8xx kup4x kup
-ELPT860 powerpc mpc8xx elpt860 LEOX
-uc100 powerpc mpc8xx - manroland
-IAD210 powerpc mpc8xx - siemens
-QS823 powerpc mpc8xx qs850 snmc
-QS850 powerpc mpc8xx qs850 snmc
-QS860T powerpc mpc8xx qs860t snmc
-stxxtc powerpc mpc8xx stxxtc stx
-FPS850L powerpc mpc8xx tqm8xx tqc
-FPS860L powerpc mpc8xx tqm8xx tqc
-NSCU powerpc mpc8xx tqm8xx tqc
-SM850 powerpc mpc8xx tqm8xx tqc
-TK885D powerpc mpc8xx tqm8xx tqc
-TQM823L powerpc mpc8xx tqm8xx tqc
-TQM823M powerpc mpc8xx tqm8xx tqc
-TQM850L powerpc mpc8xx tqm8xx tqc
-TQM850M powerpc mpc8xx tqm8xx tqc
-TQM855L powerpc mpc8xx tqm8xx tqc
-TQM855M powerpc mpc8xx tqm8xx tqc
-TQM860L powerpc mpc8xx tqm8xx tqc
-TQM860M powerpc mpc8xx tqm8xx tqc
-TQM862L powerpc mpc8xx tqm8xx tqc
-TQM862M powerpc mpc8xx tqm8xx tqc
-TQM866M powerpc mpc8xx tqm8xx tqc
-TQM885D powerpc mpc8xx tqm8xx tqc
-AMX860 powerpc mpc8xx amx860 westel
-AdderII powerpc mpc8xx adder - - Adder:MPC852T
-IVML24 powerpc mpc8xx ivm - - IVML24:IVML24_16M
-IVMS8 powerpc mpc8xx ivm - - IVMS8:IVMS8_16M
-NETTA powerpc mpc8xx netta - - NETTA
-NETTA2 powerpc mpc8xx netta2 - - NETTA2:NETTA2_VERSION=1
-NETVIA powerpc mpc8xx netvia - - NETVIA:NETVIA_VERSION=1
-TTTech powerpc mpc8xx tqm8xx tqc - TQM823L:LCD,SHARP_LQ104V7DS01
-wtk powerpc mpc8xx tqm8xx tqc - TQM823L:LCD,SHARP_LQ065T9DR51U
-csb272 powerpc ppc4xx
-csb472 powerpc ppc4xx
-ERIC powerpc ppc4xx eric
-G2000 powerpc ppc4xx g2000
-JSE powerpc ppc4xx jse
-korat powerpc ppc4xx
-lwmon5 powerpc ppc4xx
-ML2 powerpc ppc4xx ml2
-sbc405 powerpc ppc4xx
-sc3 powerpc ppc4xx
-t3corp powerpc ppc4xx
-W7OLMC powerpc ppc4xx w7o
-W7OLMG powerpc ppc4xx w7o
-zeus powerpc ppc4xx
-acadia powerpc ppc4xx - amcc
-bamboo powerpc ppc4xx - amcc
-bubinga powerpc ppc4xx - amcc
-ebony powerpc ppc4xx - amcc
-katmai powerpc ppc4xx - amcc
-luan powerpc ppc4xx - amcc
-makalu powerpc ppc4xx - amcc
-ocotea powerpc ppc4xx - amcc
-redwood powerpc ppc4xx - amcc
-taihu powerpc ppc4xx - amcc
-taishan powerpc ppc4xx - amcc
-walnut powerpc ppc4xx walnut amcc
-yucca powerpc ppc4xx - amcc
-AP1000 powerpc ppc4xx ap1000 amirix
-CRAYL1 powerpc ppc4xx L1 cray
-ADCIOP powerpc ppc4xx adciop esd
-APC405 powerpc ppc4xx apc405 esd
-AR405 powerpc ppc4xx ar405 esd
-ASH405 powerpc ppc4xx ash405 esd
-CANBT powerpc ppc4xx canbt esd
-CMS700 powerpc ppc4xx cms700 esd
-CPCI2DP powerpc ppc4xx cpci2dp esd
-CPCI405 powerpc ppc4xx cpci405 esd
-DP405 powerpc ppc4xx dp405 esd
-DU405 powerpc ppc4xx du405 esd
-DU440 powerpc ppc4xx du440 esd
-HH405 powerpc ppc4xx hh405 esd
-HUB405 powerpc ppc4xx hub405 esd
-OCRTC powerpc ppc4xx ocrtc esd
-PCI405 powerpc ppc4xx pci405 esd
-PLU405 powerpc ppc4xx plu405 esd
-PMC405 powerpc ppc4xx pmc405 esd
-PMC440 powerpc ppc4xx pmc440 esd
-VOH405 powerpc ppc4xx voh405 esd
-VOM405 powerpc ppc4xx vom405 esd
-WUH405 powerpc ppc4xx wuh405 esd
-neo powerpc ppc4xx - gdsys
-icon powerpc ppc4xx - mosaixtech
-MIP405 powerpc ppc4xx mip405 mpl
-PIP405 powerpc ppc4xx pip405 mpl
-hcu4 powerpc ppc4xx hcu4 netstal
-hcu5 powerpc ppc4xx hcu5 netstal
-mcu25 powerpc ppc4xx mcu25 netstal
-alpr powerpc ppc4xx - prodrive
-p3p440 powerpc ppc4xx - prodrive
-KAREF powerpc ppc4xx karef sandburst
-acadia_nand powerpc ppc4xx acadia amcc - acadia:NAND_U_BOOT=y,SYS_TEXT_BASE=0x01000000
-bamboo_nand powerpc ppc4xx bamboo amcc - bamboo:NAND_U_BOOT=y,SYS_TEXT_BASE=0x01000000
-haleakala_nand powerpc ppc4xx kilauea amcc - kilauea:NAND_U_BOOT=y,SYS_TEXT_BASE=0x01000000
-kilauea powerpc ppc4xx kilauea amcc - kilauea:KILAUEA
-kilauea_nand powerpc ppc4xx kilauea amcc - kilauea:NAND_U_BOOT=y,SYS_TEXT_BASE=0x01000000
-rainier powerpc ppc4xx sequoia amcc - sequoia:RAINIER
-rainier_nand powerpc ppc4xx sequoia amcc - sequoia:RAINIER,NAND_U_BOOT=y,SYS_TEXT_BASE=0x01000000
-rainier_ramboot powerpc ppc4xx sequoia amcc - sequoia:RAINIER,SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/sequoia/u-boot-ram.lds
-sequoia powerpc ppc4xx sequoia amcc - sequoia:SEQUOIA
-sequoia_nand powerpc ppc4xx sequoia amcc - sequoia:SEQUOIA,NAND_U_BOOT=y,SYS_TEXT_BASE=0x01000000
-sequoia_ramboot powerpc ppc4xx sequoia amcc - sequoia:SEQUOIA,SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/sequoia/u-boot-ram.lds
-fx12mm powerpc ppc4xx fx12mm avnet - fx12mm:SYS_TEXT_BASE=0x03000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds
-fx12mm_flash powerpc ppc4xx fx12mm avnet - fx12mm:SYS_TEXT_BASE=0xFFCB0000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds
-intip powerpc ppc4xx intip gdsys - intip:INTIB
-MIP405T powerpc ppc4xx mip405 mpl - MIP405:MIP405T
-ml507 powerpc ppc4xx ml507 xilinx - ml507:SYS_TEXT_BASE=0x04000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds
-ml507_flash powerpc ppc4xx ml507 xilinx - ml507:SYS_TEXT_BASE=0xFE360000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds
-arches powerpc ppc4xx canyonlands amcc - canyonlands:ARCHES
-glacier powerpc ppc4xx canyonlands amcc - canyonlands:GLACIER
-glacier_nand powerpc ppc4xx canyonlands amcc - canyonlands:GLACIER,NAND_U_BOOT=y,SYS_TEXT_BASE=0x01000000
-v5fx30teval powerpc ppc4xx v5fx30teval avnet - v5fx30teval:SYS_TEXT_BASE=0x03000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds
-grsim sparc leon3 - gaisler
-PM825_ROMBOOT_BIGFLASH powerpc mpc8260 pm826 - - PM826:PCI,BOOT_ROM,FLASH_32MB,SYS_TEXT_BASE=0xFF800000
-PM826_ROMBOOT_BIGFLASH powerpc mpc8260 pm826 - - PM826:BOOT_ROM,FLASH_32MB,SYS_TEXT_BASE=0xFF800000
-imx31_litekit arm arm1136 - logicpd mx31
-omap2420h4 arm arm1136 - ti omap24xx
-tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
-armadillo arm arm720t
-modnet50 arm arm720t
-lpc2292sodimm arm arm720t - - lpc2292
-eb_cpux9k2 arm arm920t - BuS at91
-at91rm9200dk arm arm920t - atmel at91rm9200
-at91rm9200ek arm arm920t - atmel at91
-sbc2410x arm arm920t - - s3c24x0
-smdk2400 arm arm920t - samsung s3c24x0
-smdk2410 arm arm920t - samsung s3c24x0
-voiceblue arm arm925t
-omap1510inn arm arm925t - ti
-afeb9260 arm arm926ejs - - at91
-at91cap9adk arm arm926ejs - atmel at91
-davinci_dvevm arm arm926ejs dvevm davinci davinci
-davinci_sffsdr arm arm926ejs sffsdr davinci davinci
-davinci_sonata arm arm926ejs sonata davinci davinci
-da830evm arm arm926ejs da8xxevm davinci davinci
-da850evm arm arm926ejs da8xxevm davinci davinci
-guruplug arm arm926ejs - Marvell kirkwood
-mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood
-openrd_base arm arm926ejs - Marvell kirkwood
-sheevaplug arm arm926ejs - Marvell kirkwood
-imx27lite arm arm926ejs imx27lite logicpd mx27
-magnesium arm arm926ejs imx27lite logicpd mx27
-omap5912osk arm arm926ejs - ti omap
-edminiv2 arm arm926ejs - LaCie orion5x
-ca9x4_ct_vxp arm armv7 vexpress armltd
-omap3_overo arm armv7 overo - omap3
-omap3_pandora arm armv7 pandora - omap3
-omap3_zoom1 arm armv7 zoom1 logicpd omap3
-omap3_zoom2 arm armv7 zoom2 logicpd omap3
-omap3_beagle arm armv7 beagle ti omap3
-omap3_evm arm armv7 evm ti omap3
-omap3_sdp3430 arm armv7 sdp3430 ti omap3
-igep0020 arm armv7 igep0020 isee omap3
-igep0030 arm armv7 igep0030 isee omap3
-am3517_evm arm armv7 am3517evm logicpd omap3
-devkit8000 arm armv7 devkit8000 timll omap3
-omap4_panda arm armv7 panda ti omap4
-omap4_sdp4430 arm armv7 sdp4430 ti omap4
-s5p_goni arm armv7 goni samsung s5pc1xx
-smdkc100 arm armv7 smdkc100 samsung s5pc1xx
-ixdpg425 arm ixp
-lpd7a400 arm lh7a40x lpd7a40x
-lpd7a404 arm lh7a40x lpd7a40x
-colibri_pxa270 arm pxa
-pxa255_idp arm pxa
-zylonite arm pxa
-atngw100 avr32 at32ap - atmel at32ap700x
-atstk1002 avr32 at32ap atstk1000 atmel at32ap700x
-atstk1003 avr32 at32ap atstk1000 atmel at32ap700x
-atstk1004 avr32 at32ap atstk1000 atmel at32ap700x
-atstk1006 avr32 at32ap atstk1000 atmel at32ap700x
-favr-32-ezkit avr32 at32ap - earthlcd at32ap700x
-hammerhead avr32 at32ap - miromico at32ap700x
-bct-brettl2 blackfin blackfin
-bf518f-ezbrd blackfin blackfin
-bf526-ezbrd blackfin blackfin
-bf527-ezkit blackfin blackfin
-bf527-ezkit-v2 blackfin blackfin bf527-ezkit - - bf527-ezkit:BF527_EZKIT_REV_2_1
-bf527-sdp blackfin blackfin
-bf533-ezkit blackfin blackfin
-bf533-stamp blackfin blackfin
-bf537-minotaur blackfin blackfin
-bf537-pnav blackfin blackfin
-bf537-srv1 blackfin blackfin
-bf537-stamp blackfin blackfin
-bf538f-ezkit blackfin blackfin
-bf548-ezkit blackfin blackfin
-bf561-acvilon blackfin blackfin
-bf561-ezkit blackfin blackfin
-blackstamp blackfin blackfin
-blackvme blackfin blackfin
-cm-bf527 blackfin blackfin
-cm-bf533 blackfin blackfin
-cm-bf537e blackfin blackfin
-cm-bf537u blackfin blackfin
-cm-bf548 blackfin blackfin
-cm-bf561 blackfin blackfin
-ibf-dsp561 blackfin blackfin
-tcm-bf518 blackfin blackfin
-tcm-bf537 blackfin blackfin
-M5208EVBE m68k mcf52x2 m5208evbe freescale
-M5249EVB m68k mcf52x2 m5249evb freescale
-M5253DEMO m68k mcf52x2 m5253demo freescale
-M5253EVBE m68k mcf52x2 m5253evbe freescale
-M5271EVB m68k mcf52x2 m5271evb freescale
-M5275EVB m68k mcf52x2 m5275evb freescale
-M5282EVB m68k mcf52x2 m5282evb freescale
-M53017EVB m68k mcf52x2 m53017evb freescale
-mpc7448hpc2 powerpc 74xx_7xx mpc7448hpc2 freescale
-EVB64260 powerpc 74xx_7xx evb64260 - - EVB64260
-EVB64260_750CX powerpc 74xx_7xx evb64260 - - EVB64260
-pdm360ng powerpc mpc512x
-mecp5123 powerpc mpc512x - esd
-mpc5121ads powerpc mpc512x mpc5121ads freescale
-mpc5121ads_rev2 powerpc mpc512x mpc5121ads freescale - mpc5121ads:MPC5121ADS_REV2
-cmi_mpc5xx powerpc mpc5xx cmi
-digsy_mtc powerpc mpc5xxx digsy_mtc
-motionpro powerpc mpc5xxx
-cpci5200 powerpc mpc5xxx - esd
-mecp5200 powerpc mpc5xxx - esd
-icecube_5200 powerpc mpc5xxx icecube - - IceCube
-icecube_5200_DDR powerpc mpc5xxx icecube - - IceCube:MPC5200_DDR
-icecube_5200_LOWBOOT powerpc mpc5xxx icecube - - IceCube:SYS_TEXT_BASE=0xFF000000
-icecube_5200_LOWBOOT08 powerpc mpc5xxx icecube - - IceCube:SYS_TEXT_BASE=0xFF800000
-Lite5200 powerpc mpc5xxx icecube - - IceCube
-lite5200b_LOWBOOT powerpc mpc5xxx icecube - - IceCube:MPC5200_DDR,LITE5200B,SYS_TEXT_BASE=0xFF000000
-Lite5200_LOWBOOT powerpc mpc5xxx icecube - - IceCube:SYS_TEXT_BASE=0xFF000000
-Lite5200_LOWBOOT08 powerpc mpc5xxx icecube - - IceCube:SYS_TEXT_BASE=0xFF800000
-mcc200_COM12_highboot powerpc mpc5xxx mcc200 - - mcc200:CONSOLE_COM12,SYS_TEXT_BASE=0xFFF00000
-mcc200_COM12_SDRAM powerpc mpc5xxx mcc200 - - mcc200:CONSOLE_COM12,MCC200_SDRAM
-mcc200_highboot_SDRAM powerpc mpc5xxx mcc200 - - mcc200:SYS_TEXT_BASE=0xFFF00000,MCC200_SDRAM
-PM520_DDR powerpc mpc5xxx pm520 - - PM520:MPC5200_DDR
-PM520_ROMBOOT powerpc mpc5xxx pm520 - - PM520:BOOT_ROM
-prs200_highboot_DDR powerpc mpc5xxx mcc200 - - mcc200:PRS200,SYS_TEXT_BASE=0xFFF00000
-EVAL5200 powerpc mpc5xxx top5200 emk - TOP5200:EVAL5200
-MINI5200 powerpc mpc5xxx top5200 emk - TOP5200:MINI5200
-pcm030_LOWBOOT powerpc mpc5xxx pcm030 phytec - pcm030:SYS_TEXT_BASE=0xFF000000
-cam5200_niosflash powerpc mpc5xxx tqm5200 tqc - TQM5200:CAM5200,TQM5200S,TQM5200_B,CAM5200_NIOSFLASH
-TB5200_B powerpc mpc5xxx tqm5200 tqc - TB5200:TQM5200_B
-TQM5200S powerpc mpc5xxx tqm5200 tqc - TQM5200:TQM5200_B,TQM5200S
-TQM5200S_HIGHBOOT powerpc mpc5xxx tqm5200 tqc - TQM5200:TQM5200_B,TQM5200S,SYS_TEXT_BASE=0xFFF00000
-TQM5200_B powerpc mpc5xxx tqm5200 tqc - TQM5200:TQM5200_B
-TQM5200_B_HIGHBOOT powerpc mpc5xxx tqm5200 tqc - TQM5200:TQM5200_B,SYS_TEXT_BASE=0xFFF00000
-TQM5200_STK100 powerpc mpc5xxx tqm5200 tqc - TQM5200:STK52XX_REV100
-galaxy5200 powerpc mpc5xxx galaxy5200 - - galaxy5200:galaxy5200
-Total5200 powerpc mpc5xxx total5200 - - Total5200:TOTAL5200_REV=1
-Total5200_lowboot powerpc mpc5xxx total5200 - - Total5200:TOTAL5200_REV=1,SYS_TEXT_BASE=0xFE000000
-Total5200_Rev2 powerpc mpc5xxx total5200 - - Total5200:TOTAL5200_REV=2
-Total5200_Rev2_lowboot powerpc mpc5xxx total5200 - - Total5200:TOTAL5200_REV=2,SYS_TEXT_BASE=0xFE000000
-Alaska8220 powerpc mpc8220 alaska
-Yukon8220 powerpc mpc8220 alaska
-HIDDEN_DRAGON powerpc mpc824x hidden_dragon
-Sandpoint8240 powerpc mpc824x sandpoint
-Sandpoint8245 powerpc mpc824x sandpoint
-CPC45_ROMBOOT powerpc mpc824x cpc45 - - CPC45:BOOT_ROM
-cogent_mpc8260 powerpc mpc8260 cogent
-IPHASE4539 powerpc mpc8260 iphase4539
-muas3001 powerpc mpc8260 muas3001
-ppmc8260 powerpc mpc8260
-RPXsuper powerpc mpc8260 rpxsuper
-rsdproto powerpc mpc8260
-MPC8266ADS powerpc mpc8260 mpc8266ads freescale
-CPU86_ROMBOOT powerpc mpc8260 cpu86 - - CPU86:BOOT_ROM
-CPU87_ROMBOOT powerpc mpc8260 cpu87 - - CPU87:BOOT_ROM
-ISPAN_REVB powerpc mpc8260 ispan - - ISPAN:SYS_REV_B
-PM825_BIGFLASH powerpc mpc8260 pm826 - - PM826:PCI,FLASH_32MB,SYS_TEXT_BASE=0x40000000
-PM825_ROMBOOT powerpc mpc8260 pm826 - - PM826:PCI,BOOT_ROM,SYS_TEXT_BASE=0xFF800000
-PM826_BIGFLASH powerpc mpc8260 pm826 - - PM826:FLASH_32MB,SYS_TEXT_BASE=0x40000000
-PM826_ROMBOOT powerpc mpc8260 pm826 - - PM826:BOOT_ROM,SYS_TEXT_BASE=0xFF800000
-PM828_PCI powerpc mpc8260 pm828 - - PM828:PCI
-PM828_ROMBOOT powerpc mpc8260 pm828 - - PM828:BOOT_ROM,SYS_TEXT_BASE=0xFF800000
-Rattler8248 powerpc mpc8260 rattler - - Rattler:MPC8248
-TQM8255_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8255,300MHz
-TQM8260_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz
-TQM8260_AB powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz,L2_CACHE,BUSMODE_60x
-TQM8260_AC powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz,L2_CACHE,BUSMODE_60x
-TQM8260_AD powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,300MHz,BUSMODE_60x
-TQM8260_AE powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,266MHz
-TQM8260_AF powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,300MHz,BUSMODE_60x
-TQM8260_AG powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,300MHz
-TQM8260_AH powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,300MHz,L2_CACHE,BUSMODE_60x
-TQM8260_AI powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,300MHz,BUSMODE_60x
-TQM8265_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8265,300MHz,BUSMODE_60x
-muas3001_dev powerpc mpc8260 muas3001 - - muas3001:MUAS_DEV_BOARD
-MPC8260ADS powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS
-MPC8272ADS powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8272ADS
-PQ2FADS-VR powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,8260_CLKIN=66000000
-PQ2FADS-ZU powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS
-PQ2FADS_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,SYS_TEXT_BASE=0xFF800000
-VoVPN-GW_66MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_66MHz
-MPC8308RDB powerpc mpc83xx mpc8308rdb freescale
-MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
-MPC8349EMDS powerpc mpc83xx mpc8349emds freescale
-MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
-sbc8349_PCI_33 powerpc mpc83xx sbc8349 - - sbc8349:PCI,PCI_33M
-sbc8349_PCI_66 powerpc mpc83xx sbc8349 - - sbc8349:PCI,PCI_66M
-SIMPC8313_LP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_LP
-SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_SP
-MPC8313ERDB_33 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_33MHZ
-MPC8313ERDB_66 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_66MHZ
-MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale - MPC8315ERDB
-MPC832XEMDS powerpc mpc83xx mpc832xemds freescale - MPC832XEMDS:
-MPC832XEMDS_ATM powerpc mpc83xx mpc832xemds freescale - MPC832XEMDS:PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1
-MPC8349ITX powerpc mpc83xx mpc8349itx freescale - MPC8349ITX:MPC8349ITX
-MPC8349ITXGP powerpc mpc83xx mpc8349itx freescale - MPC8349ITX:MPC8349ITXGP,SYS_TEXT_BASE=0xFE000000
-MPC8360EMDS powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:
-MPC8360EMDS_ATM powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1
-MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale - MPC8360ERDK
-MPC8360ERDK_33 powerpc mpc83xx mpc8360erdk freescale - MPC8360ERDK:CLKIN_33MHZ
-MPC8360ERDK_66 powerpc mpc83xx mpc8360erdk freescale - MPC8360ERDK
-MPC837XEMDS powerpc mpc83xx mpc837xemds freescale - MPC837XEMDS
-ATUM8548 powerpc mpc85xx atum8548
-socrates powerpc mpc85xx socrates
-MPC8540ADS powerpc mpc85xx mpc8540ads freescale
-MPC8544DS powerpc mpc85xx mpc8544ds freescale
-MPC8560ADS powerpc mpc85xx mpc8560ads freescale
-MPC8568MDS powerpc mpc85xx mpc8568mds freescale
-xpedite520x powerpc mpc85xx - xes
-xpedite537x powerpc mpc85xx - xes
-xpedite550x powerpc mpc85xx - xes
-sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540
-sbc8540_66 powerpc mpc85xx sbc8560 - - SBC8540
-sbc8548_PCI_33 powerpc mpc85xx sbc8548 - - sbc8548:PCI,33
-sbc8548_PCI_66 powerpc mpc85xx sbc8548 - - sbc8548:PCI,66
-sbc8560_33 powerpc mpc85xx sbc8560 - - sbc8560
-sbc8560_66 powerpc mpc85xx sbc8560 - - sbc8560
-stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M
-TQM8548_AG powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8548,TQM8548_AG=y,HOSTNAME=tqm8485,BOARDNAME="TQM8548_AG"
-TQM8548_BE powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8548,TQM8548_BE=y,HOSTNAME=tqm8548,BOARDNAME="TQM8548_BE"
-MPC8540EVAL powerpc mpc85xx mpc8540eval - - MPC8540EVAL:SYSCLK_66M
-MPC8540EVAL_33 powerpc mpc85xx mpc8540eval - - MPC8540EVAL
-MPC8540EVAL_66 powerpc mpc85xx mpc8540eval - - MPC8540EVAL:SYSCLK_66M
-P2020DS_36BIT powerpc mpc85xx p2020ds freescale - P2020DS:36BIT
-P2020DS_DDR2 powerpc mpc85xx p2020ds freescale - P2020DS:DDR2
-MPC8536DS powerpc mpc85xx mpc8536ds freescale - MPC8536DS
-MPC8536DS_36BIT powerpc mpc85xx mpc8536ds freescale - MPC8536DS:36BIT
-MPC8536DS_NAND powerpc mpc85xx mpc8536ds freescale - MPC8536DS:NAND
-MPC8541CDS powerpc mpc85xx mpc8541cds freescale - MPC8541CDS
-MPC8548CDS powerpc mpc85xx mpc8548cds freescale - MPC8548CDS
-MPC8555CDS powerpc mpc85xx mpc8555cds freescale - MPC8555CDS
-MPC8569MDS powerpc mpc85xx mpc8569mds freescale - MPC8569MDS
-MPC8569MDS_ATM powerpc mpc85xx mpc8569mds freescale - MPC8569MDS:ATM
-MPC8569MDS_NAND powerpc mpc85xx mpc8569mds freescale - MPC8569MDS:NAND
-MPC8572DS powerpc mpc85xx mpc8572ds freescale - MPC8572DS
-MPC8572DS_36BIT powerpc mpc85xx mpc8572ds freescale - MPC8572DS:36BIT
-P1011RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011
-P1011RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011,NAND
-P1011RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011,SDCARD
-P1020RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB
-P1020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,NAND
-P1020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SDCARD
-P2010RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010
-P2010RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010,NAND
-P2010RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010,SDCARD
-P2020RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020
-P2020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020,NAND
-P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020,SDCARD
-sbc8641d powerpc mpc86xx
-MPC8610HPCD powerpc mpc86xx mpc8610hpcd freescale
-xpedite517x powerpc mpc86xx - xes
-MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale - MPC8641HPCN
-cogent_mpc8xx powerpc mpc8xx cogent
-ESTEEM192E powerpc mpc8xx esteem192e
-FADS850SAR powerpc mpc8xx fads
-FADS860T powerpc mpc8xx fads
-MPC86xADS powerpc mpc8xx fads
-MPC885ADS powerpc mpc8xx fads
-RPXClassic powerpc mpc8xx
-RRvision powerpc mpc8xx
-SPD823TS powerpc mpc8xx spd8xx
-svm_sc8xx powerpc mpc8xx
-SXNI855T powerpc mpc8xx sixnet
-virtlab2 powerpc mpc8xx tqm8xx tqc
-Adder87x powerpc mpc8xx adder - - Adder
-AdderUSB powerpc mpc8xx adder - - Adder
-GEN860T_SC powerpc mpc8xx gen860t - - GEN860T:SC
-ICU862_100MHz powerpc mpc8xx icu862 - - ICU862:100MHz
-IVML24_128 powerpc mpc8xx ivm - - IVML24:IVML24_32M
-IVML24_256 powerpc mpc8xx ivm - - IVML24:IVML24_64M
-IVMS8_128 powerpc mpc8xx ivm - - IVMS8:IVMS8_32M
-IVMS8_256 powerpc mpc8xx ivm - - IVMS8:IVMS8_64M
-NETTA2_V2 powerpc mpc8xx netta2 - - NETTA2:NETTA2_VERSION=2
-NETTA_6412 powerpc mpc8xx netta - - NETTA:NETTA_6412=1
-NETTA_ISDN powerpc mpc8xx netta - - NETTA:NETTA_ISDN=1
-NETTA_ISDN_6412 powerpc mpc8xx netta - - NETTA:NETTA_ISDN=1,NETTA_6412=1
-NETTA_SWAPHOOK powerpc mpc8xx netta - - NETTA:NETTA_SWAPHOOK=1
-NETVIA_V2 powerpc mpc8xx netvia - - NETVIA:NETVIA_VERSION=2
-TQM823L_LCD powerpc mpc8xx tqm8xx tqc - TQM823L:LCD,NEC_NL6448BC20
-NETPHONE powerpc mpc8xx netphone - - NETPHONE:NETPHONE_VERSION=1
-NETPHONE_V2 powerpc mpc8xx netphone - - NETPHONE:NETPHONE_VERSION=2
-RPXlite_DW powerpc mpc8xx RPXlite_dw - - RPXlite_DW
-RPXlite_DW_64 powerpc mpc8xx RPXlite_dw - - RPXlite_DW:RPXlite_64MHz
-RPXlite_DW_64_LCD powerpc mpc8xx RPXlite_dw - - RPXlite_DW:RPXlite_64MHz,LCD,NEC_NL6448BC20
-RPXlite_DW_LCD powerpc mpc8xx RPXlite_dw - - RPXlite_DW:LCD,NEC_NL6448BC20
-RPXlite_DW_NVRAM powerpc mpc8xx RPXlite_dw - - RPXlite_DW:ENV_IS_IN_NVRAM
-RPXlite_DW_NVRAM_64 powerpc mpc8xx RPXlite_dw - - RPXlite_DW:RPXlite_64MHz,ENV_IS_IN_NVRAM
-RPXlite_DW_NVRAM_64_LCD powerpc mpc8xx RPXlite_dw - - RPXlite_DW:RPXlite_64MHz,LCD,NEC_NL6448BC20,ENV_IS_IN_NVRAM
-RPXlite_DW_NVRAM_LCD powerpc mpc8xx RPXlite_dw - - RPXlite_DW:LCD,NEC_NL6448BC20,ENV_IS_IN_NVRAM
-RRvision_LCD powerpc mpc8xx RRvision - - RRvision:LCD,SHARP_LQ104V7DS01
-pcs440ep powerpc ppc4xx
-quad100hd powerpc ppc4xx
-CPCI4052 powerpc ppc4xx cpci405 esd
-CPCI405AB powerpc ppc4xx cpci405 esd
-CPCI405DT powerpc ppc4xx cpci405 esd
-dlvision powerpc ppc4xx - gdsys
-gdppc440etx powerpc ppc4xx - gdsys
-io powerpc ppc4xx 405ep gdsys
-iocon powerpc ppc4xx 405ep gdsys
-CPCIISER4 powerpc ppc4xx cpciiser4 esd
-DASA_SIM powerpc ppc4xx dasa_sim esd
-PMC405DE powerpc ppc4xx pmc405de esd
-METROBOX powerpc ppc4xx metrobox sandburst
-xpedite1000 powerpc ppc4xx - xes
-korat_perm powerpc ppc4xx korat - - korat:KORAT_PERMANENT
-haleakala powerpc ppc4xx kilauea amcc - kilauea:HALEAKALA
-sycamore powerpc ppc4xx walnut amcc - walnut
-devconcenter powerpc ppc4xx intip gdsys - intip:DEVCONCENTER
-canyonlands powerpc ppc4xx canyonlands amcc - canyonlands:CANYONLANDS
-yellowstone powerpc ppc4xx yosemite amcc - yosemite:YELLOWSTONE
-yosemite powerpc ppc4xx yosemite amcc - yosemite:YOSEMITE
-CATcenter powerpc ppc4xx PPChameleonEVB dave - CATcenter:PPCHAMELEON_MODULE_MODEL=1
-CATcenter_25 powerpc ppc4xx PPChameleonEVB dave - CATcenter:PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_25
-CATcenter_33 powerpc ppc4xx PPChameleonEVB dave - CATcenter:PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_33
-xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0x04000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds
-xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0x04000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds
-mpc8308_p1m powerpc mpc83xx
-bluestone powerpc ppc4xx - amcc
-grsim_leon2 sparc leon2 - gaisler
-gr_cpci_ax2000 sparc leon3 - gaisler
-gr_ep2s60 sparc leon3 - gaisler
-gr_xc3s_1500 sparc leon3 - gaisler
-icecube_5200_DDR_LOWBOOT powerpc mpc5xxx icecube - - IceCube:SYS_TEXT_BASE=0xFF800000,MPC5200_DDR
-MPC832XEMDS_SLAVE powerpc mpc83xx mpc832xemds freescale - MPC832XEMDS:PCI,PCISLAVE
-MPC8360EMDS_SLAVE powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:PCI,PCISLAVE
-microblaze-generic microblaze microblaze microblaze-generic xilinx
-digsy_mtc_LOWBOOT powerpc mpc5xxx digsy_mtc - - digsy_mtc:SYS_TEXT_BASE=0xFF000000
-digsy_mtc_RAMBOOT powerpc mpc5xxx digsy_mtc - - digsy_mtc:SYS_TEXT_BASE=0x00100000
-PPChameleonEVB powerpc ppc4xx PPChameleonEVB dave
-PM520_ROMBOOT_DDR powerpc mpc5xxx pm520 - - PM520:MPC5200_DDR,BOOT_ROM
-galaxy5200_LOWBOOT powerpc mpc5xxx galaxy5200 - - galaxy5200:galaxy5200_LOWBOOT
-icecube_5200_DDR_LOWBOOT08 powerpc mpc5xxx icecube - - IceCube:SYS_TEXT_BASE=0xFF800000,MPC5200_DDR
-mcc200_COM12_highboot_SDRAM powerpc mpc5xxx mcc200 - - mcc200:CONSOLE_COM12,SYS_TEXT_BASE=0xFFF00000,MCC200_SDRAM
-linkstation_HGLAN powerpc mpc824x linkstation - - linkstation:HGLAN=1
-PM828_ROMBOOT_PCI powerpc mpc8260 pm828 - - PM828:PCI,BOOT_ROM,SYS_TEXT_BASE=0xFF800000
-MPC8260ADS_33MHz powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,8260_CLKIN=33000000
-MPC8260ADS_33MHz_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,8260_CLKIN=33000000,SYS_TEXT_BASE=0xFF800000
-MPC8260ADS_40MHz powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,8260_CLKIN=40000000
-MPC8260ADS_40MHz_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,8260_CLKIN=40000000,SYS_TEXT_BASE=0xFF800000
-MPC8260ADS_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,SYS_TEXT_BASE=0xFF800000
-MPC8272ADS_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8272ADS,SYS_TEXT_BASE=0xFF800000
-PQ2FADS-VR_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,8260_CLKIN=66000000,SYS_TEXT_BASE=0xFF800000
-PQ2FADS-ZU_66MHz powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,8260_CLKIN=66000000
-PQ2FADS-ZU_66MHz_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,8260_CLKIN=66000000,SYS_TEXT_BASE=0xFF800000
-PQ2FADS-ZU_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,SYS_TEXT_BASE=0xFF800000
-MPC8313ERDB_NAND_33 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_33MHZ,NAND_U_BOOT=y,SYS_TEXT_BASE=0x00100000
-MPC8313ERDB_NAND_66 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_66MHZ,NAND_U_BOOT=y,SYS_TEXT_BASE=0x00100000
-MPC8315ERDB_NAND powerpc mpc83xx mpc8315erdb freescale - MPC8315ERDB:NAND
-MPC832XEMDS_HOST_33 powerpc mpc83xx mpc832xemds freescale - MPC832XEMDS:PCI,PCI_33M,PQ_MDS_PIB=1
-MPC832XEMDS_HOST_66 powerpc mpc83xx mpc832xemds freescale - MPC832XEMDS:PCI,PCI_66M,PQ_MDS_PIB=1
-MPC8349ITX_LOWBOOT powerpc mpc83xx mpc8349itx freescale - MPC8349ITX:MPC8349ITX,SYS_TEXT_BASE=0xFE000000
-MPC8360EMDS_HOST_33 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:PCI,PCI_33M,PQ_MDS_PIB=1
-MPC8360EMDS_HOST_66 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:PCI,PCI_66M,PQ_MDS_PIB=1
-MPC837XEMDS_HOST powerpc mpc83xx mpc837xemds freescale - MPC837XEMDS:PCI
-sbc8548_PCI_33_PCIE powerpc mpc85xx sbc8548 - - sbc8548:PCI,33,PCIE
-sbc8548_PCI_66_PCIE powerpc mpc85xx sbc8548 - - sbc8548:PCI,66,PCIE
-MPC8540EVAL_33_slave powerpc mpc85xx mpc8540eval - - MPC8540EVAL:PCI_SLAVE
-MPC8540EVAL_66_slave powerpc mpc85xx mpc8540eval - - MPC8540EVAL:SYSCLK_66M,PCI_SLAVE
-MPC8536DS_SDCARD powerpc mpc85xx mpc8536ds freescale - MPC8536DS:SDCARD
-MPC8536DS_SPIFLASH powerpc mpc85xx mpc8536ds freescale - MPC8536DS:SPIFLASH
-MPC8541CDS_legacy powerpc mpc85xx mpc8541cds freescale - MPC8541CDS:LEGACY
-MPC8548CDS_legacy powerpc mpc85xx mpc8548cds freescale - MPC8548CDS:LEGACY
-MPC8555CDS_legacy powerpc mpc85xx mpc8555cds freescale - MPC8555CDS:LEGACY
-P1011RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011,SPIFLASH
-P1020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020,SPIFLASH
-P2010RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010,SPIFLASH
-P2020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020,SPIFLASH
-MPC8641HPCN_36BIT powerpc mpc86xx mpc8641hpcn freescale - MPC8641HPCN:PHYS_64BIT
-NETTA_6412_SWAPHOOK powerpc mpc8xx netta - - NETTA:NETTA_6412=1,NETTA_SWAPHOOK=1
-NETTA_ISDN_SWAPHOOK powerpc mpc8xx netta - - NETTA:NETTA_ISDN=1,NETTA_SWAPHOOK=1
-NETTA_ISDN_6412_SWAPHOOK powerpc mpc8xx netta - - NETTA:NETTA_ISDN=1,NETTA_6412=1,NETTA_SWAPHOOK=1
-canyonlands_nand powerpc ppc4xx canyonlands amcc - canyonlands:CANYONLANDS,NAND_U_BOOT=y,SYS_TEXT_BASE=0x01000000
-v5fx30teval_flash powerpc ppc4xx v5fx30teval avnet - v5fx30teval:SYS_TEXT_BASE=0xFF1C0000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds
-PPChameleonEVB_BA_25 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=0,PPCHAMELEON_CLK_25
-PPChameleonEVB_BA_33 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=0,PPCHAMELEON_CLK_33
-PPChameleonEVB_HI_25 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=2,PPCHAMELEON_CLK_25
-PPChameleonEVB_HI_33 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=2,PPCHAMELEON_CLK_33
-PPChameleonEVB_ME_25 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_25
-PPChameleonEVB_ME_33 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_33
-xilinx-ppc405-generic_flash powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0xFE360000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds
-xilinx-ppc440-generic_flash powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0xFE360000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds
-davinci_dm355evm arm arm926ejs dm355evm davinci davinci
-davinci_dm365evm arm arm926ejs dm365evm davinci davinci
-davinci_dm6467evm arm arm926ejs dm6467evm davinci davinci
-davinci_schmoogie arm arm926ejs schmoogie davinci davinci
-davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci
-bf527-ad7160-eval blackfin blackfin
-rsk7203 sh sh2 rsk7203 renesas -
-mpr2 sh sh3 mpr2 - -
-ms7720se sh sh3 ms7720se - -
-MigoRsh sh4 MigoR renesas -
-ms7750se sh sh4 ms7750se - -
-ms7722se sh sh4 ms7722se - -
-r2dplus sh sh4 r2dplus renesas -
-r7780mp sh sh4 r7780mp renesas -
-sh7763rdp sh sh4 sh7763rdp renesas -
-sh7785lcr sh sh4 sh7785lcr renesas -
-sh7785lcr_32bit sh sh4 sh7785lcr renesas - sh7785lcr:SH_32BIT=1
-ap325rxa sh sh4 ap325rxa renesas -
-espt sh sh4 espt - -
-# Target ARCH CPU Board name Vendor SoC Options
-###############################################################################################
+qong arm arm1136 - davedenx mx31
+mx31ads arm arm1136 - freescale mx31
+imx31_litekit arm arm1136 - logicpd mx31
+omap2420h4 arm arm1136 - ti omap24xx
+tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
+armadillo arm arm720t
+ep7312 arm arm720t
+impa7 arm arm720t
+modnet50 arm arm720t
+lpc2292sodimm arm arm720t - - lpc2292
+SMN42 arm arm720t - siemens lpc2292
+evb4510 arm arm720t - - s3c4510b
+a320evb arm arm920t - faraday a320
+at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek
+at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT
+eb_cpux9k2 arm arm920t - BuS at91
+cmc_pu2 arm arm920t - - at91rm9200
+csb637 arm arm920t - - at91rm9200
+kb9202 arm arm920t - - at91rm9200
+m501sk arm arm920t - - at91rm9200
+mp2usb arm arm920t - - at91rm9200
+at91rm9200dk arm arm920t - atmel at91rm9200
+mx1ads arm arm920t - - imx
+mx1fs2 arm arm920t - - imx
+scb9328 arm arm920t - - imx
+cm4008 arm arm920t - - ks8695
+cm41xx arm arm920t - - ks8695
+sbc2410x arm arm920t - - s3c24x0
+VCMA9 arm arm920t vcma9 mpl s3c24x0
+smdk2400 arm arm920t - samsung s3c24x0
+smdk2410 arm arm920t - samsung s3c24x0
+netstar arm arm925t
+voiceblue arm arm925t
+omap1510inn arm arm925t - ti
+afeb9260 arm arm926ejs - - at91
+at91cap9adk arm arm926ejs - atmel at91
+top9000eval_xe arm arm926ejs top9000 emk at91 top9000:EVAL9000
+top9000su_xe arm arm926ejs top9000 emk at91 top9000:SU9000
+meesc arm arm926ejs - esd at91
+otc570 arm arm926ejs - esd at91
+pm9261 arm arm926ejs - ronetix at91
+pm9263 arm arm926ejs - ronetix at91
+da830evm arm arm926ejs da8xxevm davinci davinci
+da850evm arm arm926ejs da8xxevm davinci davinci
+davinci_dm355evm arm arm926ejs dm355evm davinci davinci
+davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci
+davinci_dm365evm arm arm926ejs dm365evm davinci davinci
+davinci_dm6467evm arm arm926ejs dm6467evm davinci davinci
+davinci_dvevm arm arm926ejs dvevm davinci davinci
+davinci_schmoogie arm arm926ejs schmoogie davinci davinci
+davinci_sffsdr arm arm926ejs sffsdr davinci davinci
+davinci_sonata arm arm926ejs sonata davinci davinci
+suen3 arm arm926ejs km_arm keymile kirkwood
+guruplug arm arm926ejs - Marvell kirkwood
+mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood
+openrd_base arm arm926ejs - Marvell kirkwood
+rd6281a arm arm926ejs - Marvell kirkwood
+sheevaplug arm arm926ejs - Marvell kirkwood
+dockstar arm arm926ejs - Seagate kirkwood
+jadecpu arm arm926ejs jadecpu syteco mb86r0x
+imx27lite arm arm926ejs imx27lite logicpd mx27
+magnesium arm arm926ejs imx27lite logicpd mx27
+omap5912osk arm arm926ejs - ti omap
+edminiv2 arm arm926ejs - LaCie orion5x
+ca9x4_ct_vxp arm armv7 vexpress armltd
+mx51evk arm armv7 mx51evk freescale mx5
+vision2 arm armv7 vision2 ttcontrol mx5
+omap3_overo arm armv7 overo - omap3
+omap3_pandora arm armv7 pandora - omap3
+igep0020 arm armv7 igep0020 isee omap3
+igep0030 arm armv7 igep0030 isee omap3
+am3517_evm arm armv7 am3517evm logicpd omap3
+omap3_zoom1 arm armv7 zoom1 logicpd omap3
+omap3_zoom2 arm armv7 zoom2 logicpd omap3
+omap3_beagle arm armv7 beagle ti omap3
+omap3_evm arm armv7 evm ti omap3
+omap3_sdp3430 arm armv7 sdp3430 ti omap3
+devkit8000 arm armv7 devkit8000 timll omap3
+omap4_panda arm armv7 panda ti omap4
+omap4_sdp4430 arm armv7 sdp4430 ti omap4
+s5p_goni arm armv7 goni samsung s5pc1xx
+smdkc100 arm armv7 smdkc100 samsung s5pc1xx
+actux1 arm ixp
+actux2 arm ixp
+actux3 arm ixp
+actux4 arm ixp
+ixdp425 arm ixp
+ixdpg425 arm ixp
+lpd7a400 arm lh7a40x lpd7a40x
+lpd7a404 arm lh7a40x lpd7a40x
+balloon3 arm pxa
+cerf250 arm pxa
+colibri_pxa270 arm pxa
+cradle arm pxa
+csb226 arm pxa
+innokom arm pxa
+lubbock arm pxa
+palmld arm pxa
+palmtc arm pxa
+pleb2 arm pxa
+polaris arm pxa trizepsiv - - trizepsiv:POLARIS
+pxa255_idp arm pxa
+trizepsiv arm pxa
+vpac270_nor_128 arm pxa vpac270 - - vpac270:NOR,RAM_128M
+vpac270_nor_256 arm pxa vpac270 - - vpac270:NOR,RAM_256M
+vpac270_ond_256 arm pxa vpac270 - - vpac270:ONENAND,RAM_256M
+xaeniax arm pxa
+xm250 arm pxa
+zipitz2 arm pxa
+zylonite arm pxa
+B2 arm s3c44b0 - dave
+assabet arm sa1100
+dnp1110 arm sa1100
+gcplus arm sa1100
+jornada arm sa1100
+lart arm sa1100
+shannon arm sa1100
+atngw100 avr32 at32ap - atmel at32ap700x
+atstk1002 avr32 at32ap atstk1000 atmel at32ap700x
+atstk1003 avr32 at32ap atstk1000 atmel at32ap700x
+atstk1004 avr32 at32ap atstk1000 atmel at32ap700x
+atstk1006 avr32 at32ap atstk1000 atmel at32ap700x
+favr-32-ezkit avr32 at32ap - earthlcd at32ap700x
+mimc200 avr32 at32ap - mimc at32ap700x
+hammerhead avr32 at32ap - miromico at32ap700x
+bct-brettl2 blackfin blackfin
+bf518f-ezbrd blackfin blackfin
+bf526-ezbrd blackfin blackfin
+bf527-ad7160-eval blackfin blackfin
+bf527-ezkit blackfin blackfin
+bf527-ezkit-v2 blackfin blackfin bf527-ezkit - - bf527-ezkit:BF527_EZKIT_REV_2_1
+bf527-sdp blackfin blackfin
+bf533-ezkit blackfin blackfin
+bf533-stamp blackfin blackfin
+bf537-minotaur blackfin blackfin
+bf537-pnav blackfin blackfin
+bf537-srv1 blackfin blackfin
+bf537-stamp blackfin blackfin
+bf538f-ezkit blackfin blackfin
+bf548-ezkit blackfin blackfin
+bf561-acvilon blackfin blackfin
+bf561-ezkit blackfin blackfin
+blackstamp blackfin blackfin
+blackvme blackfin blackfin
+cm-bf527 blackfin blackfin
+cm-bf533 blackfin blackfin
+cm-bf537e blackfin blackfin
+cm-bf537u blackfin blackfin
+cm-bf548 blackfin blackfin
+cm-bf561 blackfin blackfin
+ibf-dsp561 blackfin blackfin
+ip04 blackfin blackfin
+tcm-bf518 blackfin blackfin
+tcm-bf537 blackfin blackfin
+eNET i386 i386 - - sc520
+idmr m68k mcf52x2
+TASREG m68k mcf52x2 tasreg esd
+M5208EVBE m68k mcf52x2 m5208evbe freescale
+M5249EVB m68k mcf52x2 m5249evb freescale
+M5253DEMO m68k mcf52x2 m5253demo freescale
+M5253EVBE m68k mcf52x2 m5253evbe freescale
+M5271EVB m68k mcf52x2 m5271evb freescale
+M5272C3 m68k mcf52x2 m5272c3 freescale
+M5275EVB m68k mcf52x2 m5275evb freescale
+M5282EVB m68k mcf52x2 m5282evb freescale
+M53017EVB m68k mcf52x2 m53017evb freescale
+EP2500 m68k mcf52x2 ep2500 Mercury
+microblaze-generic microblaze microblaze microblaze-generic xilinx
+purple mips mips
+tb0229 mips mips
+PCI5441 nios2 nios2 pci5441 psyent
+PK1C20 nios2 nios2 pk1c20 psyent
+EVB64260 powerpc 74xx_7xx evb64260 - - EVB64260
+EVB64260_750CX powerpc 74xx_7xx evb64260 - - EVB64260
+P3G4 powerpc 74xx_7xx evb64260
+PCIPPC2 powerpc 74xx_7xx pcippc2
+PCIPPC6 powerpc 74xx_7xx pcippc2
+ppmc7xx powerpc 74xx_7xx
+ZUMA powerpc 74xx_7xx evb64260
+BAB7xx powerpc 74xx_7xx bab7xx eltec
+ELPPC powerpc 74xx_7xx elppc eltec
+CPCI750 powerpc 74xx_7xx cpci750 esd
+mpc7448hpc2 powerpc 74xx_7xx mpc7448hpc2 freescale
+DB64360 powerpc 74xx_7xx db64360 Marvell
+DB64460 powerpc 74xx_7xx db64460 Marvell
+p3m7448 powerpc 74xx_7xx p3mx prodrive - p3mx:P3M7448
+p3m750 powerpc 74xx_7xx p3mx prodrive - p3mx:P3M750
+pdm360ng powerpc mpc512x
+aria powerpc mpc512x - davedenx
+mecp5123 powerpc mpc512x - esd
+mpc5121ads powerpc mpc512x mpc5121ads freescale
+mpc5121ads_rev2 powerpc mpc512x mpc5121ads freescale - mpc5121ads:MPC5121ADS_REV2
+cmi_mpc5xx powerpc mpc5xx cmi
+PATI powerpc mpc5xx pati mpl
+a4m072 powerpc mpc5xxx a4m072
+BC3450 powerpc mpc5xxx bc3450
+canmb powerpc mpc5xxx
+cm5200 powerpc mpc5xxx
+digsy_mtc powerpc mpc5xxx digsy_mtc
+digsy_mtc_LOWBOOT powerpc mpc5xxx digsy_mtc - - digsy_mtc:SYS_TEXT_BASE=0xFF000000
+digsy_mtc_RAMBOOT powerpc mpc5xxx digsy_mtc - - digsy_mtc:SYS_TEXT_BASE=0x00100000
+galaxy5200 powerpc mpc5xxx galaxy5200 - - galaxy5200:galaxy5200
+galaxy5200_LOWBOOT powerpc mpc5xxx galaxy5200 - - galaxy5200:galaxy5200_LOWBOOT
+icecube_5200 powerpc mpc5xxx icecube - - IceCube
+icecube_5200_DDR powerpc mpc5xxx icecube - - IceCube:MPC5200_DDR
+icecube_5200_DDR_LOWBOOT powerpc mpc5xxx icecube - - IceCube:SYS_TEXT_BASE=0xFF800000,MPC5200_DDR
+icecube_5200_DDR_LOWBOOT08 powerpc mpc5xxx icecube - - IceCube:SYS_TEXT_BASE=0xFF800000,MPC5200_DDR
+icecube_5200_LOWBOOT powerpc mpc5xxx icecube - - IceCube:SYS_TEXT_BASE=0xFF000000
+icecube_5200_LOWBOOT08 powerpc mpc5xxx icecube - - IceCube:SYS_TEXT_BASE=0xFF800000
+inka4x0 powerpc mpc5xxx
+ipek01 powerpc mpc5xxx
+jupiter powerpc mpc5xxx
+Lite5200 powerpc mpc5xxx icecube - - IceCube
+lite5200b powerpc mpc5xxx icecube - - IceCube:MPC5200_DDR,LITE5200B
+lite5200b_LOWBOOT powerpc mpc5xxx icecube - - IceCube:MPC5200_DDR,LITE5200B,SYS_TEXT_BASE=0xFF000000
+lite5200b_PM powerpc mpc5xxx icecube - - IceCube:MPC5200_DDR,LITE5200B,LITE5200B_PM
+Lite5200_LOWBOOT powerpc mpc5xxx icecube - - IceCube:SYS_TEXT_BASE=0xFF000000
+Lite5200_LOWBOOT08 powerpc mpc5xxx icecube - - IceCube:SYS_TEXT_BASE=0xFF800000
+mcc200 powerpc mpc5xxx mcc200 - - mcc200
+mcc200_COM12 powerpc mpc5xxx mcc200 - - mcc200:CONSOLE_COM12
+mcc200_COM12_highboot powerpc mpc5xxx mcc200 - - mcc200:CONSOLE_COM12,SYS_TEXT_BASE=0xFFF00000
+mcc200_COM12_highboot_SDRAM powerpc mpc5xxx mcc200 - - mcc200:CONSOLE_COM12,SYS_TEXT_BASE=0xFFF00000,MCC200_SDRAM
+mcc200_COM12_SDRAM powerpc mpc5xxx mcc200 - - mcc200:CONSOLE_COM12,MCC200_SDRAM
+mcc200_highboot powerpc mpc5xxx mcc200 - - mcc200:SYS_TEXT_BASE=0xFFF00000
+mcc200_highboot_SDRAM powerpc mpc5xxx mcc200 - - mcc200:SYS_TEXT_BASE=0xFFF00000,MCC200_SDRAM
+mcc200_SDRAM powerpc mpc5xxx mcc200 - - mcc200:MCC200_SDRAM
+motionpro powerpc mpc5xxx
+munices powerpc mpc5xxx
+o2dnt powerpc mpc5xxx
+PM520 powerpc mpc5xxx pm520
+PM520_DDR powerpc mpc5xxx pm520 - - PM520:MPC5200_DDR
+PM520_ROMBOOT powerpc mpc5xxx pm520 - - PM520:BOOT_ROM
+PM520_ROMBOOT_DDR powerpc mpc5xxx pm520 - - PM520:MPC5200_DDR,BOOT_ROM
+prs200 powerpc mpc5xxx mcc200 - - mcc200:PRS200,MCC200_SDRAM
+prs200_DDR powerpc mpc5xxx mcc200 - - mcc200:PRS200
+prs200_highboot powerpc mpc5xxx mcc200 - - mcc200:PRS200,SYS_TEXT_BASE=0xFFF00000,MCC200_SDRAM
+prs200_highboot_DDR powerpc mpc5xxx mcc200 - - mcc200:PRS200,SYS_TEXT_BASE=0xFFF00000
+Total5200 powerpc mpc5xxx total5200 - - Total5200:TOTAL5200_REV=1
+Total5200_lowboot powerpc mpc5xxx total5200 - - Total5200:TOTAL5200_REV=1,SYS_TEXT_BASE=0xFE000000
+Total5200_Rev2 powerpc mpc5xxx total5200 - - Total5200:TOTAL5200_REV=2
+Total5200_Rev2_lowboot powerpc mpc5xxx total5200 - - Total5200:TOTAL5200_REV=2,SYS_TEXT_BASE=0xFE000000
+v38b powerpc mpc5xxx
+EVAL5200 powerpc mpc5xxx top5200 emk - TOP5200:EVAL5200
+MINI5200 powerpc mpc5xxx top5200 emk - TOP5200:MINI5200
+TOP5200 powerpc mpc5xxx top5200 emk - TOP5200:TOP5200
+cpci5200 powerpc mpc5xxx - esd
+mecp5200 powerpc mpc5xxx - esd
+pf5200 powerpc mpc5xxx - esd
+hmi1001 powerpc mpc5xxx - manroland
+mucmc52 powerpc mpc5xxx - manroland
+uc101 powerpc mpc5xxx - manroland
+MVBC_P powerpc mpc5xxx mvbc_p matrix_vision - MVBC_P:MVBC_P
+MVSMR powerpc mpc5xxx mvsmr matrix_vision
+pcm030 powerpc mpc5xxx pcm030 phytec - pcm030
+pcm030_LOWBOOT powerpc mpc5xxx pcm030 phytec - pcm030:SYS_TEXT_BASE=0xFF000000
+aev powerpc mpc5xxx tqm5200 tqc
+cam5200 powerpc mpc5xxx tqm5200 tqc - TQM5200:CAM5200,TQM5200S,TQM5200_B
+cam5200_niosflash powerpc mpc5xxx tqm5200 tqc - TQM5200:CAM5200,TQM5200S,TQM5200_B,CAM5200_NIOSFLASH
+fo300 powerpc mpc5xxx tqm5200 tqc - TQM5200:FO300
+MiniFAP powerpc mpc5xxx tqm5200 tqc - TQM5200:MINIFAP
+TB5200 powerpc mpc5xxx tqm5200 tqc
+TB5200_B powerpc mpc5xxx tqm5200 tqc - TB5200:TQM5200_B
+TQM5200 powerpc mpc5xxx tqm5200 tqc - TQM5200:
+TQM5200_B powerpc mpc5xxx tqm5200 tqc - TQM5200:TQM5200_B
+TQM5200_B_HIGHBOOT powerpc mpc5xxx tqm5200 tqc - TQM5200:TQM5200_B,SYS_TEXT_BASE=0xFFF00000
+TQM5200S powerpc mpc5xxx tqm5200 tqc - TQM5200:TQM5200_B,TQM5200S
+TQM5200S_HIGHBOOT powerpc mpc5xxx tqm5200 tqc - TQM5200:TQM5200_B,TQM5200S,SYS_TEXT_BASE=0xFFF00000
+TQM5200_STK100 powerpc mpc5xxx tqm5200 tqc - TQM5200:STK52XX_REV100
+Alaska8220 powerpc mpc8220 alaska
+sorcery powerpc mpc8220
+Yukon8220 powerpc mpc8220 alaska
+A3000 powerpc mpc824x a3000
+BMW powerpc mpc824x bmw
+CPC45 powerpc mpc824x cpc45 - - CPC45
+CPC45_ROMBOOT powerpc mpc824x cpc45 - - CPC45:BOOT_ROM
+CU824 powerpc mpc824x cu824
+eXalion powerpc mpc824x eXalion
+HIDDEN_DRAGON powerpc mpc824x hidden_dragon
+linkstation_HGLAN powerpc mpc824x linkstation - - linkstation:HGLAN=1
+MOUSSE powerpc mpc824x mousse
+MUSENKI powerpc mpc824x musenki
+MVBLUE powerpc mpc824x mvblue
+OXC powerpc mpc824x oxc
+PN62 powerpc mpc824x pn62
+Sandpoint8240 powerpc mpc824x sandpoint
+Sandpoint8245 powerpc mpc824x sandpoint
+sbc8240 powerpc mpc824x
+utx8245 powerpc mpc824x
+debris powerpc mpc824x - etin
+kvme080 powerpc mpc824x - etin
+atc powerpc mpc8260
+cogent_mpc8260 powerpc mpc8260 cogent
+CPU86 powerpc mpc8260 cpu86 - - CPU86
+CPU86_ROMBOOT powerpc mpc8260 cpu86 - - CPU86:BOOT_ROM
+CPU87 powerpc mpc8260 cpu87 - - CPU87
+CPU87_ROMBOOT powerpc mpc8260 cpu87 - - CPU87:BOOT_ROM
+ep8248 powerpc mpc8260 ep8248
+ep8248E powerpc mpc8260 ep8248 - - ep8248
+ep8260 powerpc mpc8260
+ep82xxm powerpc mpc8260
+gw8260 powerpc mpc8260
+hymod powerpc mpc8260
+IDS8247 powerpc mpc8260 ids8247
+IPHASE4539 powerpc mpc8260 iphase4539
+ISPAN powerpc mpc8260 ispan
+ISPAN_REVB powerpc mpc8260 ispan - - ISPAN:SYS_REV_B
+muas3001 powerpc mpc8260 muas3001
+muas3001_dev powerpc mpc8260 muas3001 - - muas3001:MUAS_DEV_BOARD
+PM825 powerpc mpc8260 pm826 - - PM826:PCI,SYS_TEXT_BASE=0xFF000000
+PM825_BIGFLASH powerpc mpc8260 pm826 - - PM826:PCI,FLASH_32MB,SYS_TEXT_BASE=0x40000000
+PM825_ROMBOOT powerpc mpc8260 pm826 - - PM826:PCI,BOOT_ROM,SYS_TEXT_BASE=0xFF800000
+PM825_ROMBOOT_BIGFLASH powerpc mpc8260 pm826 - - PM826:PCI,BOOT_ROM,FLASH_32MB,SYS_TEXT_BASE=0xFF800000
+PM826 powerpc mpc8260 pm826 - - PM826:SYS_TEXT_BASE=0xFF000000
+PM826_BIGFLASH powerpc mpc8260 pm826 - - PM826:FLASH_32MB,SYS_TEXT_BASE=0x40000000
+PM826_ROMBOOT powerpc mpc8260 pm826 - - PM826:BOOT_ROM,SYS_TEXT_BASE=0xFF800000
+PM826_ROMBOOT_BIGFLASH powerpc mpc8260 pm826 - - PM826:BOOT_ROM,FLASH_32MB,SYS_TEXT_BASE=0xFF800000
+PM828 powerpc mpc8260 pm828 - - PM828
+PM828_PCI powerpc mpc8260 pm828 - - PM828:PCI
+PM828_ROMBOOT powerpc mpc8260 pm828 - - PM828:BOOT_ROM,SYS_TEXT_BASE=0xFF800000
+PM828_ROMBOOT_PCI powerpc mpc8260 pm828 - - PM828:PCI,BOOT_ROM,SYS_TEXT_BASE=0xFF800000
+ppmc8260 powerpc mpc8260
+Rattler powerpc mpc8260 rattler - - Rattler
+Rattler8248 powerpc mpc8260 rattler - - Rattler:MPC8248
+RPXsuper powerpc mpc8260 rpxsuper
+rsdproto powerpc mpc8260
+sacsng powerpc mpc8260
+sbc8260 powerpc mpc8260
+ZPC1900 powerpc mpc8260 zpc1900
+MPC8260ADS powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS
+MPC8260ADS_33MHz powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,8260_CLKIN=33000000
+MPC8260ADS_33MHz_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,8260_CLKIN=33000000,SYS_TEXT_BASE=0xFF800000
+MPC8260ADS_40MHz powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,8260_CLKIN=40000000
+MPC8260ADS_40MHz_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,8260_CLKIN=40000000,SYS_TEXT_BASE=0xFF800000
+MPC8260ADS_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8260ADS,SYS_TEXT_BASE=0xFF800000
+MPC8266ADS powerpc mpc8260 mpc8266ads freescale
+MPC8272ADS powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8272ADS
+MPC8272ADS_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_8272ADS,SYS_TEXT_BASE=0xFF800000
+PQ2FADS powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS
+PQ2FADS_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,SYS_TEXT_BASE=0xFF800000
+PQ2FADS-VR powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,8260_CLKIN=66000000
+PQ2FADS-VR_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,8260_CLKIN=66000000,SYS_TEXT_BASE=0xFF800000
+PQ2FADS-ZU powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS
+PQ2FADS-ZU_66MHz powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,8260_CLKIN=66000000
+PQ2FADS-ZU_66MHz_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,8260_CLKIN=66000000,SYS_TEXT_BASE=0xFF800000
+PQ2FADS-ZU_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,SYS_TEXT_BASE=0xFF800000
+VoVPN-GW_66MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_66MHz
+mgcoge powerpc mpc8260 - keymile
+SCM powerpc mpc8260 - siemens
+TQM8255_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8255,300MHz
+TQM8260_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz
+TQM8260_AB powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz,L2_CACHE,BUSMODE_60x
+TQM8260_AC powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz,L2_CACHE,BUSMODE_60x
+TQM8260_AD powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,300MHz,BUSMODE_60x
+TQM8260_AE powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,266MHz
+TQM8260_AF powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,300MHz,BUSMODE_60x
+TQM8260_AG powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,300MHz
+TQM8260_AH powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,300MHz,L2_CACHE,BUSMODE_60x
+TQM8260_AI powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,300MHz,BUSMODE_60x
+TQM8265_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8265,300MHz,BUSMODE_60x
+TQM8272 powerpc mpc8260 tqm8272 tqc
+mpc8308_p1m powerpc mpc83xx
+sbc8349 powerpc mpc83xx sbc8349 - - sbc8349
+sbc8349_PCI_33 powerpc mpc83xx sbc8349 - - sbc8349:PCI,PCI_33M
+sbc8349_PCI_66 powerpc mpc83xx sbc8349 - - sbc8349:PCI,PCI_66M
+ve8313 powerpc mpc83xx ve8313
+caddy2 powerpc mpc83xx vme8349 esd - vme8349:CADDY2
+vme8349 powerpc mpc83xx vme8349 esd - vme8349
+MPC8308RDB powerpc mpc83xx mpc8308rdb freescale
+MPC8313ERDB_33 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_33MHZ
+MPC8313ERDB_66 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_66MHZ
+MPC8313ERDB_NAND_33 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_33MHZ,NAND_U_BOOT
+MPC8313ERDB_NAND_66 powerpc mpc83xx mpc8313erdb freescale - MPC8313ERDB:SYS_66MHZ,NAND_U_BOOT
+MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale - MPC8315ERDB
+MPC8315ERDB_NAND powerpc mpc83xx mpc8315erdb freescale - MPC8315ERDB:NAND_U_BOOT
+MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
+MPC832XEMDS powerpc mpc83xx mpc832xemds freescale - MPC832XEMDS:
+MPC832XEMDS_ATM powerpc mpc83xx mpc832xemds freescale - MPC832XEMDS:PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1
+MPC832XEMDS_HOST_33 powerpc mpc83xx mpc832xemds freescale - MPC832XEMDS:PCI,PCI_33M,PQ_MDS_PIB=1
+MPC832XEMDS_HOST_66 powerpc mpc83xx mpc832xemds freescale - MPC832XEMDS:PCI,PCI_66M,PQ_MDS_PIB=1
+MPC832XEMDS_SLAVE powerpc mpc83xx mpc832xemds freescale - MPC832XEMDS:PCI,PCISLAVE
+MPC8349EMDS powerpc mpc83xx mpc8349emds freescale
+MPC8349ITX powerpc mpc83xx mpc8349itx freescale - MPC8349ITX:MPC8349ITX
+MPC8349ITXGP powerpc mpc83xx mpc8349itx freescale - MPC8349ITX:MPC8349ITXGP,SYS_TEXT_BASE=0xFE000000
+MPC8349ITX_LOWBOOT powerpc mpc83xx mpc8349itx freescale - MPC8349ITX:MPC8349ITX,SYS_TEXT_BASE=0xFE000000
+MPC8360EMDS powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:
+MPC8360EMDS_ATM powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1
+MPC8360EMDS_HOST_33 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:PCI,PCI_33M,PQ_MDS_PIB=1
+MPC8360EMDS_HOST_66 powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:PCI,PCI_66M,PQ_MDS_PIB=1
+MPC8360EMDS_SLAVE powerpc mpc83xx mpc8360emds freescale - MPC8360EMDS:PCI,PCISLAVE
+MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale - MPC8360ERDK
+MPC8360ERDK_33 powerpc mpc83xx mpc8360erdk freescale - MPC8360ERDK:CLKIN_33MHZ
+MPC8360ERDK_66 powerpc mpc83xx mpc8360erdk freescale - MPC8360ERDK
+MPC837XEMDS powerpc mpc83xx mpc837xemds freescale - MPC837XEMDS
+MPC837XEMDS_HOST powerpc mpc83xx mpc837xemds freescale - MPC837XEMDS:PCI
+MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
+kmeter1 powerpc mpc83xx kmeter1 keymile
+MVBLM7 powerpc mpc83xx mvblm7 matrix_vision
+SIMPC8313_LP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_LP
+SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_SP
+TQM834x powerpc mpc83xx tqm834x tqc
+ATUM8548 powerpc mpc85xx atum8548
+MPC8540EVAL powerpc mpc85xx mpc8540eval - - MPC8540EVAL:SYSCLK_66M
+MPC8540EVAL_33 powerpc mpc85xx mpc8540eval - - MPC8540EVAL
+MPC8540EVAL_33_slave powerpc mpc85xx mpc8540eval - - MPC8540EVAL:PCI_SLAVE
+MPC8540EVAL_66 powerpc mpc85xx mpc8540eval - - MPC8540EVAL:SYSCLK_66M
+MPC8540EVAL_66_slave powerpc mpc85xx mpc8540eval - - MPC8540EVAL:SYSCLK_66M,PCI_SLAVE
+PM854 powerpc mpc85xx pm854
+PM856 powerpc mpc85xx pm856
+sbc8540 powerpc mpc85xx sbc8560 - - SBC8540
+sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540
+sbc8540_66 powerpc mpc85xx sbc8560 - - SBC8540
+sbc8548 powerpc mpc85xx sbc8548 - - sbc8548
+sbc8548_PCI_33 powerpc mpc85xx sbc8548 - - sbc8548:PCI,33
+sbc8548_PCI_33_PCIE powerpc mpc85xx sbc8548 - - sbc8548:PCI,33,PCIE
+sbc8548_PCI_66 powerpc mpc85xx sbc8548 - - sbc8548:PCI,66
+sbc8548_PCI_66_PCIE powerpc mpc85xx sbc8548 - - sbc8548:PCI,66,PCIE
+sbc8560 powerpc mpc85xx sbc8560 - - sbc8560
+sbc8560_33 powerpc mpc85xx sbc8560 - - sbc8560
+sbc8560_66 powerpc mpc85xx sbc8560 - - sbc8560
+socrates powerpc mpc85xx socrates
+MPC8536DS powerpc mpc85xx mpc8536ds freescale - MPC8536DS
+MPC8536DS_36BIT powerpc mpc85xx mpc8536ds freescale - MPC8536DS:36BIT
+MPC8536DS_NAND powerpc mpc85xx mpc8536ds freescale - MPC8536DS:NAND
+MPC8536DS_SDCARD powerpc mpc85xx mpc8536ds freescale - MPC8536DS:SDCARD
+MPC8536DS_SPIFLASH powerpc mpc85xx mpc8536ds freescale - MPC8536DS:SPIFLASH
+MPC8540ADS powerpc mpc85xx mpc8540ads freescale
+MPC8541CDS powerpc mpc85xx mpc8541cds freescale - MPC8541CDS
+MPC8541CDS_legacy powerpc mpc85xx mpc8541cds freescale - MPC8541CDS:LEGACY
+MPC8544DS powerpc mpc85xx mpc8544ds freescale
+MPC8548CDS powerpc mpc85xx mpc8548cds freescale - MPC8548CDS
+MPC8548CDS_legacy powerpc mpc85xx mpc8548cds freescale - MPC8548CDS:LEGACY
+MPC8555CDS powerpc mpc85xx mpc8555cds freescale - MPC8555CDS
+MPC8555CDS_legacy powerpc mpc85xx mpc8555cds freescale - MPC8555CDS:LEGACY
+MPC8560ADS powerpc mpc85xx mpc8560ads freescale
+MPC8568MDS powerpc mpc85xx mpc8568mds freescale
+MPC8569MDS powerpc mpc85xx mpc8569mds freescale - MPC8569MDS
+MPC8569MDS_ATM powerpc mpc85xx mpc8569mds freescale - MPC8569MDS:ATM
+MPC8569MDS_NAND powerpc mpc85xx mpc8569mds freescale - MPC8569MDS:NAND
+MPC8572DS powerpc mpc85xx mpc8572ds freescale - MPC8572DS
+MPC8572DS_36BIT powerpc mpc85xx mpc8572ds freescale - MPC8572DS:36BIT
+P1011RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011
+P1011RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011,NAND
+P1011RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011,SDCARD
+P1011RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011,SPIFLASH
+P1020RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB
+P1020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,NAND
+P1020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SDCARD
+P1020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020,SPIFLASH
+P1022DS powerpc mpc85xx p1022ds freescale
+P2010RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010
+P2010RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010,NAND
+P2010RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010,SDCARD
+P2010RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010,SPIFLASH
+P2020DS powerpc mpc85xx p2020ds freescale
+P2020DS_36BIT powerpc mpc85xx p2020ds freescale - P2020DS:36BIT
+P2020DS_DDR2 powerpc mpc85xx p2020ds freescale - P2020DS:DDR2
+P2020RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020
+P2020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020,NAND
+P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020,SDCARD
+P2020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020,SPIFLASH
+P4080DS powerpc mpc85xx corenet_ds freescale
+stxgp3 powerpc mpc85xx stxgp3 stx
+stxssa powerpc mpc85xx stxssa stx - stxssa
+stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M
+TQM8540 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8540,TQM8540=y,HOSTNAME=tqm8540,BOARDNAME="TQM8540"
+TQM8541 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8541,TQM8541=y,HOSTNAME=tqm8541,BOARDNAME="TQM8541"
+TQM8548 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8548,TQM8548=y,HOSTNAME=tqm8548,BOARDNAME="TQM8548"
+TQM8548_AG powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8548,TQM8548_AG=y,HOSTNAME=tqm8485,BOARDNAME="TQM8548_AG"
+TQM8548_BE powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8548,TQM8548_BE=y,HOSTNAME=tqm8548,BOARDNAME="TQM8548_BE"
+TQM8555 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8555,TQM8555=y,HOSTNAME=tqm8555,BOARDNAME="TQM8555"
+TQM8560 powerpc mpc85xx tqm85xx tqc - TQM85xx:MPC8560,TQM8560=y,HOSTNAME=tqm8560,BOARDNAME="TQM8560"
+xpedite520x powerpc mpc85xx - xes
+xpedite537x powerpc mpc85xx - xes
+xpedite550x powerpc mpc85xx - xes
+sbc8641d powerpc mpc86xx
+MPC8610HPCD powerpc mpc86xx mpc8610hpcd freescale
+MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale - MPC8641HPCN
+MPC8641HPCN_36BIT powerpc mpc86xx mpc8641hpcn freescale - MPC8641HPCN:PHYS_64BIT
+xpedite517x powerpc mpc86xx - xes
+Adder powerpc mpc8xx adder
+Adder87x powerpc mpc8xx adder - - Adder
+AdderII powerpc mpc8xx adder - - Adder:MPC852T
+AdderUSB powerpc mpc8xx adder - - Adder
+ADS860 powerpc mpc8xx fads
+c2mon powerpc mpc8xx
+cogent_mpc8xx powerpc mpc8xx cogent
+EP88x powerpc mpc8xx ep88x
+ESTEEM192E powerpc mpc8xx esteem192e
+ETX094 powerpc mpc8xx etx094
+FADS823 powerpc mpc8xx fads
+FADS850SAR powerpc mpc8xx fads
+FADS860T powerpc mpc8xx fads
+FLAGADM powerpc mpc8xx flagadm
+GEN860T powerpc mpc8xx gen860t
+GEN860T_SC powerpc mpc8xx gen860t - - GEN860T:SC
+GENIETV powerpc mpc8xx genietv
+hermes powerpc mpc8xx
+ICU862 powerpc mpc8xx icu862
+ICU862_100MHz powerpc mpc8xx icu862 - - ICU862:100MHz
+IP860 powerpc mpc8xx ip860
+IVML24 powerpc mpc8xx ivm - - IVML24:IVML24_16M
+IVML24_128 powerpc mpc8xx ivm - - IVML24:IVML24_32M
+IVML24_256 powerpc mpc8xx ivm - - IVML24:IVML24_64M
+IVMS8 powerpc mpc8xx ivm - - IVMS8:IVMS8_16M
+IVMS8_128 powerpc mpc8xx ivm - - IVMS8:IVMS8_32M
+IVMS8_256 powerpc mpc8xx ivm - - IVMS8:IVMS8_64M
+LANTEC powerpc mpc8xx lantec
+lwmon powerpc mpc8xx
+MBX powerpc mpc8xx mbx8xx
+MBX860T powerpc mpc8xx mbx8xx
+MPC86xADS powerpc mpc8xx fads
+MPC885ADS powerpc mpc8xx fads
+NETPHONE powerpc mpc8xx netphone - - NETPHONE:NETPHONE_VERSION=1
+NETPHONE_V2 powerpc mpc8xx netphone - - NETPHONE:NETPHONE_VERSION=2
+NETTA powerpc mpc8xx netta - - NETTA
+NETTA2 powerpc mpc8xx netta2 - - NETTA2:NETTA2_VERSION=1
+NETTA2_V2 powerpc mpc8xx netta2 - - NETTA2:NETTA2_VERSION=2
+NETTA_6412 powerpc mpc8xx netta - - NETTA:NETTA_6412=1
+NETTA_6412_SWAPHOOK powerpc mpc8xx netta - - NETTA:NETTA_6412=1,NETTA_SWAPHOOK=1
+NETTA_ISDN powerpc mpc8xx netta - - NETTA:NETTA_ISDN=1
+NETTA_ISDN_6412 powerpc mpc8xx netta - - NETTA:NETTA_ISDN=1,NETTA_6412=1
+NETTA_ISDN_6412_SWAPHOOK powerpc mpc8xx netta - - NETTA:NETTA_ISDN=1,NETTA_6412=1,NETTA_SWAPHOOK=1
+NETTA_ISDN_SWAPHOOK powerpc mpc8xx netta - - NETTA:NETTA_ISDN=1,NETTA_SWAPHOOK=1
+NETTA_SWAPHOOK powerpc mpc8xx netta - - NETTA:NETTA_SWAPHOOK=1
+NETVIA powerpc mpc8xx netvia - - NETVIA:NETVIA_VERSION=1
+NETVIA_V2 powerpc mpc8xx netvia - - NETVIA:NETVIA_VERSION=2
+NX823 powerpc mpc8xx nx823
+quantum powerpc mpc8xx
+R360MPI powerpc mpc8xx r360mpi
+RBC823 powerpc mpc8xx rbc823
+rmu powerpc mpc8xx
+RPXClassic powerpc mpc8xx
+RPXlite powerpc mpc8xx
+RPXlite_DW powerpc mpc8xx RPXlite_dw - - RPXlite_DW
+RPXlite_DW_64 powerpc mpc8xx RPXlite_dw - - RPXlite_DW:RPXlite_64MHz
+RPXlite_DW_64_LCD powerpc mpc8xx RPXlite_dw - - RPXlite_DW:RPXlite_64MHz,LCD,NEC_NL6448BC20
+RPXlite_DW_LCD powerpc mpc8xx RPXlite_dw - - RPXlite_DW:LCD,NEC_NL6448BC20
+RPXlite_DW_NVRAM powerpc mpc8xx RPXlite_dw - - RPXlite_DW:ENV_IS_IN_NVRAM
+RPXlite_DW_NVRAM_64 powerpc mpc8xx RPXlite_dw - - RPXlite_DW:RPXlite_64MHz,ENV_IS_IN_NVRAM
+RPXlite_DW_NVRAM_64_LCD powerpc mpc8xx RPXlite_dw - - RPXlite_DW:RPXlite_64MHz,LCD,NEC_NL6448BC20,ENV_IS_IN_NVRAM
+RPXlite_DW_NVRAM_LCD powerpc mpc8xx RPXlite_dw - - RPXlite_DW:LCD,NEC_NL6448BC20,ENV_IS_IN_NVRAM
+RRvision powerpc mpc8xx
+RRvision_LCD powerpc mpc8xx RRvision - - RRvision:LCD,SHARP_LQ104V7DS01
+spc1920 powerpc mpc8xx
+SPD823TS powerpc mpc8xx spd8xx
+svm_sc8xx powerpc mpc8xx
+SXNI855T powerpc mpc8xx sixnet
+v37 powerpc mpc8xx
+MHPC powerpc mpc8xx mhpc eltec
+TOP860 powerpc mpc8xx top860 emk
+kmsupx4 powerpc mpc8xx km8xx keymile
+mgsuvd powerpc mpc8xx km8xx keymile
+KUP4K powerpc mpc8xx kup4k kup
+KUP4X powerpc mpc8xx kup4x kup
+ELPT860 powerpc mpc8xx elpt860 LEOX
+uc100 powerpc mpc8xx - manroland
+IAD210 powerpc mpc8xx - siemens
+QS823 powerpc mpc8xx qs850 snmc
+QS850 powerpc mpc8xx qs850 snmc
+QS860T powerpc mpc8xx qs860t snmc
+stxxtc powerpc mpc8xx stxxtc stx
+FPS850L powerpc mpc8xx tqm8xx tqc
+FPS860L powerpc mpc8xx tqm8xx tqc
+NSCU powerpc mpc8xx tqm8xx tqc
+SM850 powerpc mpc8xx tqm8xx tqc
+TK885D powerpc mpc8xx tqm8xx tqc
+TQM823L powerpc mpc8xx tqm8xx tqc
+TQM823L_LCD powerpc mpc8xx tqm8xx tqc - TQM823L:LCD,NEC_NL6448BC20
+TQM823M powerpc mpc8xx tqm8xx tqc
+TQM850L powerpc mpc8xx tqm8xx tqc
+TQM850M powerpc mpc8xx tqm8xx tqc
+TQM855L powerpc mpc8xx tqm8xx tqc
+TQM855M powerpc mpc8xx tqm8xx tqc
+TQM860L powerpc mpc8xx tqm8xx tqc
+TQM860M powerpc mpc8xx tqm8xx tqc
+TQM862L powerpc mpc8xx tqm8xx tqc
+TQM862M powerpc mpc8xx tqm8xx tqc
+TQM866M powerpc mpc8xx tqm8xx tqc
+TQM885D powerpc mpc8xx tqm8xx tqc
+TTTech powerpc mpc8xx tqm8xx tqc - TQM823L:LCD,SHARP_LQ104V7DS01
+virtlab2 powerpc mpc8xx tqm8xx tqc
+wtk powerpc mpc8xx tqm8xx tqc - TQM823L:LCD,SHARP_LQ065T9DR51U
+AMX860 powerpc mpc8xx amx860 westel
+csb272 powerpc ppc4xx
+csb472 powerpc ppc4xx
+G2000 powerpc ppc4xx g2000
+JSE powerpc ppc4xx jse
+korat powerpc ppc4xx
+korat_perm powerpc ppc4xx korat - - korat:KORAT_PERMANENT
+lwmon5 powerpc ppc4xx
+ML2 powerpc ppc4xx ml2
+pcs440ep powerpc ppc4xx
+quad100hd powerpc ppc4xx
+sbc405 powerpc ppc4xx
+sc3 powerpc ppc4xx
+t3corp powerpc ppc4xx
+W7OLMC powerpc ppc4xx w7o
+W7OLMG powerpc ppc4xx w7o
+zeus powerpc ppc4xx
+acadia powerpc ppc4xx - amcc
+acadia_nand powerpc ppc4xx acadia amcc - acadia:NAND_U_BOOT,SYS_TEXT_BASE=0x01000000
+arches powerpc ppc4xx canyonlands amcc - canyonlands:ARCHES
+bamboo powerpc ppc4xx - amcc
+bamboo_nand powerpc ppc4xx bamboo amcc - bamboo:NAND_U_BOOT,SYS_TEXT_BASE=0x01000000
+bluestone powerpc ppc4xx - amcc
+bubinga powerpc ppc4xx - amcc
+canyonlands powerpc ppc4xx canyonlands amcc - canyonlands:CANYONLANDS
+canyonlands_nand powerpc ppc4xx canyonlands amcc - canyonlands:CANYONLANDS,NAND_U_BOOT,SYS_TEXT_BASE=0x01000000
+ebony powerpc ppc4xx - amcc
+glacier powerpc ppc4xx canyonlands amcc - canyonlands:GLACIER
+glacier_nand powerpc ppc4xx canyonlands amcc - canyonlands:GLACIER,NAND_U_BOOT,SYS_TEXT_BASE=0x01000000
+haleakala powerpc ppc4xx kilauea amcc - kilauea:HALEAKALA
+haleakala_nand powerpc ppc4xx kilauea amcc - kilauea:NAND_U_BOOT,SYS_TEXT_BASE=0x01000000
+katmai powerpc ppc4xx - amcc
+kilauea powerpc ppc4xx kilauea amcc - kilauea:KILAUEA
+kilauea_nand powerpc ppc4xx kilauea amcc - kilauea:NAND_U_BOOT,SYS_TEXT_BASE=0x01000000
+luan powerpc ppc4xx - amcc
+makalu powerpc ppc4xx - amcc
+ocotea powerpc ppc4xx - amcc
+rainier powerpc ppc4xx sequoia amcc - sequoia:RAINIER
+rainier_nand powerpc ppc4xx sequoia amcc - sequoia:RAINIER,NAND_U_BOOT,SYS_TEXT_BASE=0x01000000
+rainier_ramboot powerpc ppc4xx sequoia amcc - sequoia:RAINIER,SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/sequoia/u-boot-ram.lds
+redwood powerpc ppc4xx - amcc
+sequoia powerpc ppc4xx sequoia amcc - sequoia:SEQUOIA
+sequoia_nand powerpc ppc4xx sequoia amcc - sequoia:SEQUOIA,NAND_U_BOOT,SYS_TEXT_BASE=0x01000000
+sequoia_ramboot powerpc ppc4xx sequoia amcc - sequoia:SEQUOIA,SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/sequoia/u-boot-ram.lds
+sycamore powerpc ppc4xx walnut amcc - walnut
+taihu powerpc ppc4xx - amcc
+taishan powerpc ppc4xx - amcc
+walnut powerpc ppc4xx walnut amcc
+yellowstone powerpc ppc4xx yosemite amcc - yosemite:YELLOWSTONE
+yosemite powerpc ppc4xx yosemite amcc - yosemite:YOSEMITE
+yucca powerpc ppc4xx - amcc
+AP1000 powerpc ppc4xx ap1000 amirix
+fx12mm powerpc ppc4xx fx12mm avnet - fx12mm:SYS_TEXT_BASE=0x03000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds
+fx12mm_flash powerpc ppc4xx fx12mm avnet - fx12mm:SYS_TEXT_BASE=0xFFCB0000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds
+v5fx30teval powerpc ppc4xx v5fx30teval avnet - v5fx30teval:SYS_TEXT_BASE=0x03000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds
+v5fx30teval_flash powerpc ppc4xx v5fx30teval avnet - v5fx30teval:SYS_TEXT_BASE=0xFF1C0000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds
+CRAYL1 powerpc ppc4xx L1 cray
+CATcenter powerpc ppc4xx PPChameleonEVB dave - CATcenter:PPCHAMELEON_MODULE_MODEL=1
+CATcenter_25 powerpc ppc4xx PPChameleonEVB dave - CATcenter:PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_25
+CATcenter_33 powerpc ppc4xx PPChameleonEVB dave - CATcenter:PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_33
+PPChameleonEVB powerpc ppc4xx PPChameleonEVB dave
+PPChameleonEVB_BA_25 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=0,PPCHAMELEON_CLK_25
+PPChameleonEVB_BA_33 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=0,PPCHAMELEON_CLK_33
+PPChameleonEVB_HI_25 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=2,PPCHAMELEON_CLK_25
+PPChameleonEVB_HI_33 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=2,PPCHAMELEON_CLK_33
+PPChameleonEVB_ME_25 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_25
+PPChameleonEVB_ME_33 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_33
+ADCIOP powerpc ppc4xx adciop esd
+APC405 powerpc ppc4xx apc405 esd
+AR405 powerpc ppc4xx ar405 esd
+ASH405 powerpc ppc4xx ash405 esd
+CANBT powerpc ppc4xx canbt esd
+CMS700 powerpc ppc4xx cms700 esd
+CPCI2DP powerpc ppc4xx cpci2dp esd
+CPCI405 powerpc ppc4xx cpci405 esd
+CPCI4052 powerpc ppc4xx cpci405 esd
+CPCI405AB powerpc ppc4xx cpci405 esd
+CPCI405DT powerpc ppc4xx cpci405 esd
+CPCIISER4 powerpc ppc4xx cpciiser4 esd
+DASA_SIM powerpc ppc4xx dasa_sim esd
+DP405 powerpc ppc4xx dp405 esd
+DU405 powerpc ppc4xx du405 esd
+DU440 powerpc ppc4xx du440 esd
+HH405 powerpc ppc4xx hh405 esd
+HUB405 powerpc ppc4xx hub405 esd
+OCRTC powerpc ppc4xx ocrtc esd
+PCI405 powerpc ppc4xx pci405 esd
+PLU405 powerpc ppc4xx plu405 esd
+PMC405 powerpc ppc4xx pmc405 esd
+PMC405DE powerpc ppc4xx pmc405de esd
+PMC440 powerpc ppc4xx pmc440 esd
+VOH405 powerpc ppc4xx voh405 esd
+VOM405 powerpc ppc4xx vom405 esd
+WUH405 powerpc ppc4xx wuh405 esd
+devconcenter powerpc ppc4xx intip gdsys - intip:DEVCONCENTER
+dlvision powerpc ppc4xx - gdsys
+gdppc440etx powerpc ppc4xx - gdsys
+intip powerpc ppc4xx intip gdsys - intip:INTIB
+io powerpc ppc4xx 405ep gdsys
+iocon powerpc ppc4xx 405ep gdsys
+neo powerpc ppc4xx - gdsys
+icon powerpc ppc4xx - mosaixtech
+MIP405 powerpc ppc4xx mip405 mpl
+MIP405T powerpc ppc4xx mip405 mpl - MIP405:MIP405T
+PIP405 powerpc ppc4xx pip405 mpl
+hcu4 powerpc ppc4xx hcu4 netstal
+hcu5 powerpc ppc4xx hcu5 netstal
+mcu25 powerpc ppc4xx mcu25 netstal
+alpr powerpc ppc4xx - prodrive
+p3p440 powerpc ppc4xx - prodrive
+KAREF powerpc ppc4xx karef sandburst
+METROBOX powerpc ppc4xx metrobox sandburst
+xpedite1000 powerpc ppc4xx - xes
+ml507 powerpc ppc4xx ml507 xilinx - ml507:SYS_TEXT_BASE=0x04000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds
+ml507_flash powerpc ppc4xx ml507 xilinx - ml507:SYS_TEXT_BASE=0xFE360000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds
+xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0x04000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds
+xilinx-ppc405-generic_flash powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0xFE360000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds
+xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0x04000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds
+xilinx-ppc440-generic_flash powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0xFE360000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds
+rsk7203 sh sh2 rsk7203 renesas -
+mpr2 sh sh3 mpr2 - -
+ms7720se sh sh3 ms7720se - -
+espt sh sh4 espt - -
+ms7722se sh sh4 ms7722se - -
+ms7750se sh sh4 ms7750se - -
+ap325rxa sh sh4 ap325rxa renesas -
+r2dplus sh sh4 r2dplus renesas -
+r7780mp sh sh4 r7780mp renesas -
+sh7763rdp sh sh4 sh7763rdp renesas -
+sh7785lcr sh sh4 sh7785lcr renesas -
+sh7785lcr_32bit sh sh4 sh7785lcr renesas - sh7785lcr:SH_32BIT=1
+MigoRsh sh4 MigoR renesas -
+grsim_leon2 sparc leon2 - gaisler
+gr_cpci_ax2000 sparc leon3 - gaisler
+gr_ep2s60 sparc leon3 - gaisler
+grsim sparc leon3 - gaisler
+gr_xc3s_1500 sparc leon3 - gaisler
+# Target ARCH CPU Board name Vendor SoC Options
+########################################################################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)libcommon.a
-
-AOBJS =
+LIB = $(obj)libcommon.o
# core
COBJS-y += main.o
COBJS-y += env_common.o
COBJS-$(CONFIG_ENV_IS_IN_DATAFLASH) += env_dataflash.o
COBJS-$(CONFIG_ENV_IS_IN_EEPROM) += env_eeprom.o
-COBJS-$(CONFIG_ENV_IS_EMBEDDED) += env_embedded.o
+XCOBJS-$(CONFIG_ENV_IS_EMBEDDED) += env_embedded.o
COBJS-$(CONFIG_ENV_IS_IN_EEPROM) += env_embedded.o
-COBJS-$(CONFIG_ENV_IS_IN_FLASH) += env_embedded.o
+XCOBJS-$(CONFIG_ENV_IS_IN_FLASH) += env_embedded.o
COBJS-$(CONFIG_ENV_IS_IN_NVRAM) += env_embedded.o
COBJS-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
COBJS-$(CONFIG_ENV_IS_IN_MG_DISK) += env_mgdisk.o
COBJS := $(sort $(COBJS-y))
-SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
+XCOBJS := $(sort $(XCOBJS-y))
+SRCS := $(COBJS:.o=.c) $(XCOBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+XOBJS := $(addprefix $(obj),$(XCOBJS))
CPPFLAGS += -I..
-all: $(LIB) $(AOBJS)
+all: $(LIB) $(XOBJS)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
$(obj)env_embedded.o: $(src)env_embedded.c $(obj)../tools/envcrc
$(CC) $(AFLAGS) -Wa,--no-warn \
static int do_env_default(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
if ((argc != 2) || (strcmp(argv[1], "-f") != 0)) {
- cmd_usage(cmdtp);
- return 1;
+ return cmd_usage(cmdtp);
}
set_default_env("## Resetting to default environment\n");
return 0;
sep = '\n';
break;
default:
- cmd_usage(cmdtp);
- return 1;
+ return cmd_usage(cmdtp);
}
}
}
if (argc < 1) {
- cmd_usage(cmdtp);
- return 1;
+ return cmd_usage(cmdtp);
}
addr = (char *)simple_strtoul(argv[0], NULL, 16);
del = 1;
break;
default:
- cmd_usage(cmdtp);
- return 1;
+ return cmd_usage(cmdtp);
}
}
}
if (argc < 1) {
- cmd_usage(cmdtp);
- return 1;
+ return cmd_usage(cmdtp);
}
if (!fmt)
{
cmd_tbl_t *cp;
+ if (argc < 2)
+ return cmd_usage(cmdtp);
+
/* drop initial "env" arg */
argc--;
argv++;
if (cp)
return cp->cmd(cmdtp, flag, argc, argv);
- cmd_usage(cmdtp);
- return 1;
+ return cmd_usage(cmdtp);
}
U_BOOT_CMD(
addr = (loff_t) off;
memset(&ops, 0, sizeof(ops));
ops.datbuf = datbuf;
- ops.oobbuf = oobbuf; /* must exist, but oob data will be appended to ops.datbuf */
+ ops.oobbuf = oobbuf;
ops.len = mtd->writesize;
ops.ooblen = mtd->oobsize;
ops.retlen = 0;
}
puts("OOB:\n");
i = mtd->oobsize >> 3;
+ p = oobbuf;
+
while (i--) {
printf("\t%02x %02x %02x %02x %02x %02x %02x %02x\n",
p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
static struct selected_dev ubi_dev;
+#ifdef CONFIG_CMD_UBIFS
+int ubifs_is_mounted(void);
+void cmd_ubifs_umount(void);
+#endif
+
static void ubi_dump_vol_info(const struct ubi_volume *vol)
{
ubi_msg("volume information dump:");
if (argc < 3)
return cmd_usage(cmdtp);
+#ifdef CONFIG_CMD_UBIFS
+ /*
+ * Automatically unmount UBIFS partition when user
+ * changes the UBI device. Otherwise the following
+ * UBIFS commands will crash.
+ */
+ if (ubifs_is_mounted())
+ cmd_ubifs_umount();
+#endif
+
/* todo: get dev number for NAND... */
ubi_dev.nr = 0;
#include <config.h>
#include <command.h>
+#include "../fs/ubifs/ubifs.h"
+
static int ubifs_initialized;
static int ubifs_mounted;
+extern struct super_block *ubifs_sb;
+
/* Prototypes */
int ubifs_init(void);
int ubifs_mount(char *vol_name);
+void ubifs_umount(struct ubifs_info *c);
int ubifs_ls(char *dir_name);
int ubifs_load(char *filename, u32 addr, u32 size);
return 0;
}
+int ubifs_is_mounted(void)
+{
+ return ubifs_mounted;
+}
+
+void cmd_ubifs_umount(void)
+{
+
+ if (ubifs_sb) {
+ printf("Unmounting UBIFS volume %s!\n",
+ ((struct ubifs_info *)(ubifs_sb->s_fs_info))->vi.name);
+ ubifs_umount(ubifs_sb->s_fs_info);
+ }
+
+ ubifs_sb = NULL;
+ ubifs_mounted = 0;
+ ubifs_initialized = 0;
+}
+
+int do_ubifs_umount(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ if (argc != 1)
+ return cmd_usage(cmdtp);
+
+ if (ubifs_initialized == 0) {
+ printf("No UBIFS volume mounted!\n");
+ return -1;
+ }
+
+ cmd_ubifs_umount();
+
+ return 0;
+}
+
int do_ubifs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char *filename = "/";
int ret;
if (!ubifs_mounted) {
- printf("UBIFS not mounted, use ubifs mount to mount volume first!\n");
+ printf("UBIFS not mounted, use ubifsmount to mount volume first!\n");
return -1;
}
" - mount 'volume-name' volume"
);
+U_BOOT_CMD(
+ ubifsumount, 1, 0, do_ubifs_umount,
+ "unmount UBIFS volume",
+ " - unmount current volume"
+);
+
U_BOOT_CMD(
ubifsls, 2, 0, do_ubifs_ls,
"list files in a directory",
int len;
int n_found = 0;
+ if (!cmd)
+ return NULL;
/*
* Some commands allow length modifiers (like "cp.b");
* compare command name only until first dot.
ulong old = mem_malloc_brk;
ulong new = old + increment;
+ /*
+ * if we are giving memory back make sure we clear it out since
+ * we set MORECORE_CLEARS to 1
+ */
+ if (increment < 0)
+ memset((void *)new, 0, -increment);
+
if ((new < mem_malloc_start) || (new > mem_malloc_end))
return (void *)MORECORE_FAILURE;
offset += blocksize;
} else {
char_ptr = &buf[amount_loaded];
- if (nand_read(&nand_info[0], offset, &len, char_ptr))
+ if (nand_read_skip_bad(&nand_info[0], offset, &len, char_ptr))
return 1;
offset += blocksize;
amount_loaded += len;
if (addrc) {
prop = fdt_getprop(blob, parentoffset, "#address-cells", NULL);
if (prop)
- *addrc = be32_to_cpup(prop);
+ *addrc = be32_to_cpup((u32 *)prop);
else
*addrc = 2;
}
if (sizec) {
prop = fdt_getprop(blob, parentoffset, "#size-cells", NULL);
if (prop)
- *sizec = be32_to_cpup(prop);
+ *sizec = be32_to_cpup((u32 *)prop);
else
*sizec = 1;
}
return NULL;
}
-const char *cpu_hwconfig __attribute__((weak));
-const char *board_hwconfig __attribute__((weak));
+const char cpu_hwconfig[] __attribute__((weak)) = "";
+const char board_hwconfig[] __attribute__((weak)) = "";
#define HWCONFIG_PRE_RELOC_BUF_SIZE 128
static const char *__hwconfig(const char *opt, size_t *arglen)
{
- const char *env_hwconfig = NULL;
+ const char *env_hwconfig = NULL, *ret;
char buf[HWCONFIG_PRE_RELOC_BUF_SIZE];
if (gd->flags & GD_FLG_ENV_READY) {
env_hwconfig = buf;
}
- if (env_hwconfig)
- return hwconfig_parse(env_hwconfig, strlen(env_hwconfig),
+ if (env_hwconfig) {
+ ret = hwconfig_parse(env_hwconfig, strlen(env_hwconfig),
opt, ";", ':', arglen);
+ if (ret)
+ return ret;
+ }
- if (board_hwconfig)
- return hwconfig_parse(board_hwconfig, strlen(board_hwconfig),
- opt, ";", ':', arglen);
+ ret = hwconfig_parse(board_hwconfig, strlen(board_hwconfig),
+ opt, ";", ':', arglen);
+ if (ret)
+ return ret;
- if (cpu_hwconfig)
- return hwconfig_parse(cpu_hwconfig, strlen(cpu_hwconfig),
- opt, ";", ':', arglen);
-
- return NULL;
+ return hwconfig_parse(cpu_hwconfig, strlen(cpu_hwconfig),
+ opt, ";", ':', arglen);
}
/*
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
#
# Mac OS X / Darwin's C preprocessor is Apple specific. It
# generates numerous errors and warnings. We want to bypass it
-# and use GNU C's cpp. To do this we pass the -traditional-cpp
+# and use GNU C's cpp. To do this we pass the -traditional-cpp
# option to the compiler. Note that the -traditional-cpp flag
# DOES NOT have the same semantics as GNU C's flag, all it does
# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
-o $@ $< -c -S
#########################################################################
+
+# If the list of objects to link is empty, just create an empty built-in.o
+cmd_link_o_target = $(if $(strip $1),\
+ $(LD) -r -o $@ $1 ,\
+ rm -f $@; $(AR) rcs $@ )
+
+#########################################################################
#CFLAGS += -DET_DEBUG -DDEBUG
-LIB = $(obj)libdisk.a
+LIB = $(obj)libdisk.o
COBJS-y += part.o
COBJS-$(CONFIG_MAC_PARTITION) += part_mac.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
* TI DA830 EVM
+* TI DA850 EVM
+
* DM355 based Leopard board
* DM644x based schmoogie board
make da830evm_config
make
+* TI DA850 EVM:
+
+make da850evm_config
+make
+
* DM355 based Leopard board:
make davinci_dm355leopard_config
The programmers and UBL are always released as part of any standard TI
software release associated with an SOC.
+Environment Variables
+=====================
+
+The DA850 EVM allows the user to specify the maximum cpu clock allowed by the
+silicon, in Hz, via an environment variable "maxcpuclk".
+
+The maximum clock rate allowed depends on the silicon populated on the EVM.
+Please make sure you understand the restrictions placed on this clock in the
+device specific datasheet before setting up this variable. This information is
+passed to the Linux kernel using the ATAG_REVISION atag.
+
+If "maxcpuclk" is not defined, the configuration CONFIG_DA850_EVM_MAX_CPU_CLK
+is used to obtain this information.
+
Links
=====
6) TI DA830 EVM
http://focus.ti.com/apps/docs/gencontent.tsp?appId=1&contentId=52385
http://www.spectrumdigital.com/product_info.php?cPath=37&products_id=214
+
+7) TI DA850 EVM
+http://focus.ti.com/docs/prod/folders/print/omap-l138.html
+http://www.logicpd.com/products/development-kits/zoom-omap-l138-evm-development-kit
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
-VoVPN-GW_100MHz powerpc MPC8260 - 2010-10-24 Juergen Selent <j.selent@elmeg.de>
+barco powerpc MPC8245 - 2010-11-23 Marc Leeman <marc.leeman@barco.com>
+ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
+VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at>
include $(TOPDIR)/config.mk
-LIB := $(obj)libatibiosemu.a
+LIB := $(obj)libatibiosemu.o
X86DIR = x86emu
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libblock.a
+LIB := $(obj)libblock.o
COBJS-$(CONFIG_SCSI_AHCI) += ahci.o
COBJS-$(CONFIG_ATA_PIIX) += ata_piix.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libdma.a
+LIB := $(obj)libdma.o
COBJS-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o
COBJS-$(CONFIG_FSL_DMA) += fsl_dma.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libfpga.a
+LIB := $(obj)libfpga.o
ifdef CONFIG_FPGA
COBJS-y += fpga.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libgpio.a
+LIB := $(obj)libgpio.o
COBJS-$(CONFIG_AT91_GPIO) += at91_gpio.o
COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
#CFLAGS += -DDEBUG
-LIB = $(obj)libhwmon.a
+LIB = $(obj)libhwmon.o
COBJS-$(CONFIG_DTT_ADM1021) += adm1021.o
COBJS-$(CONFIG_DTT_ADT7460) += adt7460.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libi2c.a
+LIB := $(obj)libi2c.o
COBJS-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o
COBJS-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libinput.a
+LIB := $(obj)libinput.o
COBJS-$(CONFIG_I8042_KBD) += i8042.o
ifdef CONFIG_PS2KBD
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libmisc.a
+LIB := $(obj)libmisc.o
COBJS-$(CONFIG_ALI152X) += ali512x.o
COBJS-$(CONFIG_DS4510) += ds4510.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libmmc.a
+LIB := $(obj)libmmc.o
COBJS-$(CONFIG_ATMEL_MCI) += atmel_mci.o
COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
writel(MMCI_BIT(SWRST), &mci->cr); /* soft reset */
writel(MMCI_BIT(PWSDIS), &mci->cr); /* disable power save */
writel(MMCI_BIT(MCIEN), &mci->cr); /* enable mci */
+ writel(MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr); /* select port */
/* Initial Time-outs */
writel(0x5f, &mci->dtor);
{
struct mmc_cmd cmd;
struct mmc_data data;
- int blklen, err;
-
- blklen = mmc->write_bl_len;
if ((start + blkcnt) > mmc->block_dev.lba) {
- printf("MMC: block number 0x%lx exceeds max(0x%lx)",
+ printf("MMC: block number 0x%lx exceeds max(0x%lx)\n",
start + blkcnt, mmc->block_dev.lba);
return 0;
}
if (mmc->high_capacity)
cmd.cmdarg = start;
else
- cmd.cmdarg = start * blklen;
+ cmd.cmdarg = start * mmc->write_bl_len;
cmd.resp_type = MMC_RSP_R1;
cmd.flags = 0;
data.src = src;
data.blocks = blkcnt;
- data.blocksize = blklen;
+ data.blocksize = mmc->write_bl_len;
data.flags = MMC_DATA_WRITE;
- err = mmc_send_cmd(mmc, &cmd, &data);
-
- if (err) {
- printf("mmc write failed\n\r");
- return err;
+ if (mmc_send_cmd(mmc, &cmd, &data)) {
+ printf("mmc write failed\n");
+ return 0;
}
if (blkcnt > 1) {
cmd.cmdarg = 0;
cmd.resp_type = MMC_RSP_R1b;
cmd.flags = 0;
- err = mmc_send_cmd(mmc, &cmd, NULL);
- if (err) {
- printf("mmc fail to send stop cmd\n\r");
- return err;
+ if (mmc_send_cmd(mmc, &cmd, NULL)) {
+ printf("mmc fail to send stop cmd\n");
+ return 0;
}
}
static ulong
mmc_bwrite(int dev_num, ulong start, lbaint_t blkcnt, const void*src)
{
- int err;
- struct mmc *mmc = find_mmc_device(dev_num);
lbaint_t cur, blocks_todo = blkcnt;
+ struct mmc *mmc = find_mmc_device(dev_num);
if (!mmc)
- return -1;
+ return 0;
- err = mmc_set_blocklen(mmc, mmc->write_bl_len);
- if (err) {
- printf("set write bl len failed\n\r");
- return err;
- }
+ if (mmc_set_blocklen(mmc, mmc->write_bl_len))
+ return 0;
do {
/*
*/
cur = (blocks_todo > 65535) ? 65535 : blocks_todo;
if(mmc_write_blocks(mmc, start, cur, src) != cur)
- return -1;
+ return 0;
blocks_todo -= cur;
start += cur;
src += cur * mmc->write_bl_len;
return blkcnt;
}
-int mmc_read_block(struct mmc *mmc, void *dst, uint blocknum)
+int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt)
{
struct mmc_cmd cmd;
struct mmc_data data;
- cmd.cmdidx = MMC_CMD_READ_SINGLE_BLOCK;
+ if (blkcnt > 1)
+ cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK;
+ else
+ cmd.cmdidx = MMC_CMD_READ_SINGLE_BLOCK;
if (mmc->high_capacity)
- cmd.cmdarg = blocknum;
+ cmd.cmdarg = start;
else
- cmd.cmdarg = blocknum * mmc->read_bl_len;
+ cmd.cmdarg = start * mmc->read_bl_len;
cmd.resp_type = MMC_RSP_R1;
cmd.flags = 0;
data.dest = dst;
- data.blocks = 1;
+ data.blocks = blkcnt;
data.blocksize = mmc->read_bl_len;
data.flags = MMC_DATA_READ;
- return mmc_send_cmd(mmc, &cmd, &data);
-}
-
-int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size)
-{
- char *buffer;
- int i;
- int blklen = mmc->read_bl_len;
- int startblock = lldiv(src, mmc->read_bl_len);
- int endblock = lldiv(src + size - 1, mmc->read_bl_len);
- int err = 0;
-
- /* Make a buffer big enough to hold all the blocks we might read */
- buffer = malloc(blklen);
-
- if (!buffer) {
- printf("Could not allocate buffer for MMC read!\n");
- return -1;
- }
-
- /* We always do full block reads from the card */
- err = mmc_set_blocklen(mmc, mmc->read_bl_len);
-
- if (err)
- goto free_buffer;
-
- for (i = startblock; i <= endblock; i++) {
- int segment_size;
- int offset;
-
- err = mmc_read_block(mmc, buffer, i);
-
- if (err)
- goto free_buffer;
-
- /*
- * The first block may not be aligned, so we
- * copy from the desired point in the block
- */
- offset = (src & (blklen - 1));
- segment_size = MIN(blklen - offset, size);
-
- memcpy(dst, buffer + offset, segment_size);
+ if (mmc_send_cmd(mmc, &cmd, &data))
+ return 0;
- dst += segment_size;
- src += segment_size;
- size -= segment_size;
+ if (blkcnt > 1) {
+ cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION;
+ cmd.cmdarg = 0;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.flags = 0;
+ if (mmc_send_cmd(mmc, &cmd, NULL)) {
+ printf("mmc fail to send stop cmd\n");
+ return 0;
+ }
}
-free_buffer:
- free(buffer);
-
- return err;
+ return blkcnt;
}
static ulong mmc_bread(int dev_num, ulong start, lbaint_t blkcnt, void *dst)
{
- int err;
- int i;
- struct mmc *mmc = find_mmc_device(dev_num);
+ lbaint_t cur, blocks_todo = blkcnt;
+
+ if (blkcnt == 0)
+ return 0;
+ struct mmc *mmc = find_mmc_device(dev_num);
if (!mmc)
return 0;
if ((start + blkcnt) > mmc->block_dev.lba) {
- printf("MMC: block number 0x%lx exceeds max(0x%lx)",
+ printf("MMC: block number 0x%lx exceeds max(0x%lx)\n",
start + blkcnt, mmc->block_dev.lba);
return 0;
}
- /* We always do full block reads from the card */
- err = mmc_set_blocklen(mmc, mmc->read_bl_len);
- if (err) {
+ if (mmc_set_blocklen(mmc, mmc->read_bl_len))
return 0;
- }
-
- for (i = start; i < start + blkcnt; i++, dst += mmc->read_bl_len) {
- err = mmc_read_block(mmc, dst, i);
- if (err) {
- printf("block read failed: %d\n", err);
- return i - start;
- }
- }
+ do {
+ /*
+ * The 65535 constraint comes from some hardware has
+ * only 16 bit width block number counter
+ */
+ cur = (blocks_todo > 65535) ? 65535 : blocks_todo;
+ if(mmc_read_blocks(mmc, dst, start, cur) != cur)
+ return 0;
+ blocks_todo -= cur;
+ start += cur;
+ dst += cur * mmc->read_bl_len;
+ } while (blocks_todo > 0);
return blkcnt;
}
#include <asm/io.h>
#include <asm/arch/mmc_host_def.h>
+/* If we fail after 1 second wait, something is really bad */
+#define MAX_RETRY_MS 1000
+
static int mmc_read_data(hsmmc_t *mmc_base, char *buf, unsigned int size);
static int mmc_write_data(hsmmc_t *mmc_base, const char *buf, unsigned int siz);
static struct mmc hsmmc_dev[2];
void mmc_init_stream(hsmmc_t *mmc_base)
{
+ ulong start;
writel(readl(&mmc_base->con) | INIT_INITSTREAM, &mmc_base->con);
writel(MMC_CMD0, &mmc_base->cmd);
- while (!(readl(&mmc_base->stat) & CC_MASK))
- ;
+ start = get_timer(0);
+ while (!(readl(&mmc_base->stat) & CC_MASK)) {
+ if (get_timer(0) - start > MAX_RETRY_MS) {
+ printf("%s: timedout waiting for cc!\n", __func__);
+ return;
+ }
+ }
writel(CC_MASK, &mmc_base->stat)
;
writel(MMC_CMD0, &mmc_base->cmd)
;
- while (!(readl(&mmc_base->stat) & CC_MASK))
- ;
+ start = get_timer(0);
+ while (!(readl(&mmc_base->stat) & CC_MASK)) {
+ if (get_timer(0) - start > MAX_RETRY_MS) {
+ printf("%s: timedout waiting for cc2!\n", __func__);
+ return;
+ }
+ }
writel(readl(&mmc_base->con) & ~INIT_INITSTREAM, &mmc_base->con);
}
hsmmc_t *mmc_base = (hsmmc_t *)mmc->priv;
unsigned int reg_val;
unsigned int dsor;
+ ulong start;
mmc_board_init(mmc_base);
writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET,
&mmc_base->sysconfig);
- while ((readl(&mmc_base->sysstatus) & RESETDONE) == 0)
- ;
+ start = get_timer(0);
+ while ((readl(&mmc_base->sysstatus) & RESETDONE) == 0) {
+ if (get_timer(0) - start > MAX_RETRY_MS) {
+ printf("%s: timedout waiting for cc2!\n", __func__);
+ return TIMEOUT;
+ }
+ }
writel(readl(&mmc_base->sysctl) | SOFTRESETALL, &mmc_base->sysctl);
- while ((readl(&mmc_base->sysctl) & SOFTRESETALL) != 0x0)
- ;
+ start = get_timer(0);
+ while ((readl(&mmc_base->sysctl) & SOFTRESETALL) != 0x0) {
+ if (get_timer(0) - start > MAX_RETRY_MS) {
+ printf("%s: timedout waiting for softresetall!\n",
+ __func__);
+ return TIMEOUT;
+ }
+ }
writel(DTW_1_BITMODE | SDBP_PWROFF | SDVS_3V0, &mmc_base->hctl);
writel(readl(&mmc_base->capa) | VS30_3V0SUP | VS18_1V8SUP,
&mmc_base->capa);
(ICE_STOP | DTO_15THDTO | CEN_DISABLE));
mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK,
(dsor << CLKD_OFFSET) | ICE_OSCILLATE);
- while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY)
- ;
+ start = get_timer(0);
+ while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY) {
+ if (get_timer(0) - start > MAX_RETRY_MS) {
+ printf("%s: timedout waiting for ics!\n", __func__);
+ return TIMEOUT;
+ }
+ }
writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl);
writel(readl(&mmc_base->hctl) | SDBP_PWRON, &mmc_base->hctl);
{
hsmmc_t *mmc_base = (hsmmc_t *)mmc->priv;
unsigned int flags, mmc_stat;
- unsigned int retry = 0x100000;
+ ulong start;
-
- while ((readl(&mmc_base->pstate) & DATI_MASK) == DATI_CMDDIS)
- ;
+ start = get_timer(0);
+ while ((readl(&mmc_base->pstate) & DATI_MASK) == DATI_CMDDIS) {
+ if (get_timer(0) - start > MAX_RETRY_MS) {
+ printf("%s: timedout waiting for cmddis!\n", __func__);
+ return TIMEOUT;
+ }
+ }
writel(0xFFFFFFFF, &mmc_base->stat);
- while (readl(&mmc_base->stat))
- ;
+ start = get_timer(0);
+ while (readl(&mmc_base->stat)) {
+ if (get_timer(0) - start > MAX_RETRY_MS) {
+ printf("%s: timedout waiting for stat!\n", __func__);
+ return TIMEOUT;
+ }
+ }
/*
* CMDREG
* CMDIDX[13:8] : Command index
writel(cmd->cmdarg, &mmc_base->arg);
writel((cmd->cmdidx << 24) | flags, &mmc_base->cmd);
+ start = get_timer(0);
do {
mmc_stat = readl(&mmc_base->stat);
- retry--;
- } while ((mmc_stat == 0) && (retry > 0));
-
- if (retry == 0) {
- printf("%s : timeout: No status update\n", __func__);
- return TIMEOUT;
- }
+ if (get_timer(0) - start > MAX_RETRY_MS) {
+ printf("%s : timeout: No status update\n", __func__);
+ return TIMEOUT;
+ }
+ } while (!mmc_stat);
if ((mmc_stat & IE_CTO) != 0)
return TIMEOUT;
count /= 4;
while (size) {
+ ulong start = get_timer(0);
do {
mmc_stat = readl(&mmc_base->stat);
+ if (get_timer(0) - start > MAX_RETRY_MS) {
+ printf("%s: timedout waiting for status!\n",
+ __func__);
+ return TIMEOUT;
+ }
} while (mmc_stat == 0);
if ((mmc_stat & ERRI_MASK) != 0)
count /= 4;
while (size) {
+ ulong start = get_timer(0);
do {
mmc_stat = readl(&mmc_base->stat);
+ if (get_timer(0) - start > MAX_RETRY_MS) {
+ printf("%s: timedout waiting for status!\n",
+ __func__);
+ return TIMEOUT;
+ }
} while (mmc_stat == 0);
if ((mmc_stat & ERRI_MASK) != 0)
{
hsmmc_t *mmc_base = (hsmmc_t *)mmc->priv;
unsigned int dsor = 0;
+ ulong start;
/* configue bus width */
switch (mmc->bus_width) {
mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK,
(dsor << CLKD_OFFSET) | ICE_OSCILLATE);
- while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY)
- ;
+ start = get_timer(0);
+ while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY) {
+ if (get_timer(0) - start > MAX_RETRY_MS) {
+ printf("%s: timedout waiting for ics!\n", __func__);
+ return;
+ }
+ }
writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl);
}
include $(TOPDIR)/config.mk
-LIB := $(obj)libmtd.a
+LIB := $(obj)libmtd.o
COBJS-$(CONFIG_MTD_DEVICE) += mtdcore.o
COBJS-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
* The following code cannot be run from FLASH!
*
*/
-ulong flash_get_size (phys_addr_t base, int banknum, unsigned long max_size)
+ulong flash_get_size (phys_addr_t base, int banknum)
{
flash_info_t *info = &flash_info[banknum];
int i, j;
int erase_region_size;
int erase_region_count;
struct cfi_qry qry;
+ unsigned long max_size;
memset(&qry, 0, sizeof(qry));
info->size = 1 << qry.dev_size;
/* multiply the size by the number of chips */
info->size *= size_ratio;
+ max_size = cfi_flash_bank_size(banknum);
if (max_size && (info->size > max_size)) {
debug("[truncated from %ldMiB]", info->size >> 20);
info->size = max_size;
flash_info[i].flash_id = FLASH_UNKNOWN;
if (!flash_detect_legacy(cfi_flash_bank_addr(i), i))
- flash_get_size(cfi_flash_bank_addr(i), i,
- cfi_flash_bank_size(i));
+ flash_get_size(cfi_flash_bank_addr(i), i);
size += flash_info[i].size;
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
#ifndef CONFIG_SYS_FLASH_QUIET_TEST
include $(TOPDIR)/config.mk
-LIB := $(obj)libnand.a
+LIB := $(obj)libnand.o
ifdef CONFIG_CMD_NAND
COBJS-y += nand.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
#ifndef CONFIG_NAND_SPL
nand->write_buf = ndfc_write_buf;
nand->verify_buf = ndfc_verify_buf;
+
+ chip++;
#else
/*
* Setup EBC (CS0 only right now)
mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP);
#endif
- chip++;
-
return 0;
}
writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
/* initialize hardware */
- twrph0 = 3;
- twrph1 = 0;
- tacls = 0;
+#if defined(CONFIG_S3C24XX_CUSTOM_NAND_TIMING)
+ tacls = CONFIG_S3C24XX_TACLS;
+ twrph0 = CONFIG_S3C24XX_TWRPH0;
+ twrph1 = CONFIG_S3C24XX_TWRPH1;
+#else
+ tacls = 4;
+ twrph0 = 8;
+ twrph1 = 8;
+#endif
cfg = S3C2410_NFCONF_EN;
cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
include $(TOPDIR)/config.mk
-LIB := $(obj)libonenand.a
+LIB := $(obj)libonenand.o
COBJS-$(CONFIG_CMD_ONENAND) := onenand_uboot.o onenand_base.o onenand_bbt.o
COBJS-$(CONFIG_SAMSUNG_ONENAND) += samsung.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libspi_flash.a
+LIB := $(obj)libspi_flash.o
COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o
COBJS-$(CONFIG_SPI_FLASH_ATMEL) += atmel.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libubi.a
+LIB := $(obj)libubi.o
ifdef CONFIG_CMD_UBI
COBJS-y += build.o vtbl.o vmt.o upd.o kapi.o eba.o io.o wl.o scan.o crc32.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libnet.a
+LIB := $(obj)libnet.o
COBJS-$(CONFIG_DRIVER_3C589) += 3c589.o
COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
COBJS-$(CONFIG_ALTERA_TSE) += altera_tse.o
COBJS-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o
-COBJS-$(CONFIG_BCM570x) += bcm570x.o bcm570x_autoneg.o 5701rls.o
+COBJS-$(CONFIG_BCM570x) += bcm570x.o
+COBJS-$(CONFIG_BCM570x) += bcm570x_autoneg.o
+COBJS-$(CONFIG_BCM570x) += 5701rls.o
COBJS-$(CONFIG_BFIN_MAC) += bfin_mac.o
COBJS-$(CONFIG_CS8900) += cs8900.o
COBJS-$(CONFIG_TULIP) += dc2114x.o
COBJS-$(CONFIG_SH_ETHER) += sh_eth.o
COBJS-$(CONFIG_SMC91111) += smc91111.o
COBJS-$(CONFIG_SMC911X) += smc911x.o
-COBJS-$(CONFIG_TIGON3) += tigon3.o bcm570x_autoneg.o 5701rls.o
+COBJS-$(CONFIG_TIGON3) += tigon3.o
+COBJS-$(CONFIG_TIGON3) += bcm570x_autoneg.o
+COBJS-$(CONFIG_TIGON3) += 5701rls.o
COBJS-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
COBJS-$(CONFIG_TSEC_ENET) += tsec.o
COBJS-$(CONFIG_TSI108_ETH) += tsi108_eth.o
COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o
COBJS-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
-COBJS := $(COBJS-y)
+COBJS := $(sort $(COBJS-y))
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
static int
e1000_transmit(struct eth_device *nic, volatile void *packet, int length)
{
+ void * nv_packet = (void *)packet;
struct e1000_hw *hw = nic->priv;
struct e1000_tx_desc *txp;
int i = 0;
txp = tx_base + tx_tail;
tx_tail = (tx_tail + 1) % 8;
- txp->buffer_addr = cpu_to_le64(virt_to_bus(hw->pdev, packet));
+ txp->buffer_addr = cpu_to_le64(virt_to_bus(hw->pdev, nv_packet));
txp->lower.data = cpu_to_le32(hw->txd_cmd | length);
txp->upper.data = 0;
E1000_WRITE_REG(hw, TDT, tx_tail);
return 0;
}
- memset(nic, 0, sizeof(*dev));
+ memset(nic, 0, sizeof(*nic));
memset(hw, 0, sizeof(*hw));
hw->pdev = devno;
* MA 02111-1307 USA
*/
+/* #define DEBUG */
+
#include <common.h>
#include <command.h>
#include <net.h>
#include <ambapp.h>
#include <asm/leon.h>
-/* #define DEBUG */
-
#include "greth.h"
/* Default to 3s timeout on autonegotiation */
#define GRETH_PHY_TIMEOUT_MS 3000
#endif
+/* Default to PHY adrress 0 not not specified */
+#ifdef CONFIG_SYS_GRLIB_GRETH_PHYADDR
+#define GRETH_PHY_ADR_DEFAULT CONFIG_SYS_GRLIB_GRETH_PHYADDR
+#else
+#define GRETH_PHY_ADR_DEFAULT 0
+#endif
+
/* ByPass Cache when reading regs */
#define GRETH_REGLOAD(addr) SPARC_NOCACHE_READ(addr)
/* Write-through cache ==> no bypassing needed on writes */
-#define GRETH_REGSAVE(addr,data) (*(unsigned int *)(addr) = (data))
+#define GRETH_REGSAVE(addr,data) (*(volatile unsigned int *)(addr) = (data))
#define GRETH_REGORIN(addr,data) GRETH_REGSAVE(addr,GRETH_REGLOAD(addr)|data)
#define GRETH_REGANDIN(addr,data) GRETH_REGSAVE(addr,GRETH_REGLOAD(addr)&data)
} greth_priv;
/* Read MII register 'addr' from core 'regs' */
-static int read_mii(int addr, volatile greth_regs * regs)
+static int read_mii(int phyaddr, int regaddr, volatile greth_regs * regs)
{
while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) {
}
- GRETH_REGSAVE(®s->mdio, (0 << 11) | ((addr & 0x1F) << 6) | 2);
+ GRETH_REGSAVE(®s->mdio, ((phyaddr & 0x1F) << 11) | ((regaddr & 0x1F) << 6) | 2);
while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) {
}
}
}
-static void write_mii(int addr, int data, volatile greth_regs * regs)
+static void write_mii(int phyaddr, int regaddr, int data, volatile greth_regs * regs)
{
while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) {
}
GRETH_REGSAVE(®s->mdio,
- ((data & 0xFFFF) << 16) | (0 << 11) | ((addr & 0x1F) << 6)
- | 1);
+ ((data & 0xFFFF) << 16) | ((phyaddr & 0x1F) << 11) |
+ ((regaddr & 0x1F) << 6) | 1);
while (GRETH_REGLOAD(®s->mdio) & GRETH_MII_BUSY) {
}
greth_priv *greth = dev->priv;
greth_regs *regs = greth->regs;
-#ifdef DEBUG
- printf("greth_init\n");
-#endif
- GRETH_REGSAVE(®s->control, 0);
+ debug("greth_init\n");
+
+ /* Reset core */
+ GRETH_REGSAVE(®s->control, (GRETH_RESET | (greth->gb << 8) |
+ (greth->sp << 7) | (greth->fd << 4)));
+
+ /* Wait for Reset to complete */
+ while ( GRETH_REGLOAD(®s->control) & GRETH_RESET) ;
+
+ GRETH_REGSAVE(®s->control,
+ ((greth->gb << 8) | (greth->sp << 7) | (greth->fd << 4)));
if (!greth->rxbd_base) {
greth->rxbd_base = (greth_bd *)
memalign(0x1000, GRETH_RXBD_CNT * sizeof(greth_bd));
greth->txbd_base = (greth_bd *)
- memalign(0x1000, GRETH_RXBD_CNT * sizeof(greth_bd));
+ memalign(0x1000, GRETH_TXBD_CNT * sizeof(greth_bd));
/* allocate buffers to all descriptors */
greth->rxbuf_base =
for (i = 0; i < GRETH_TXBD_CNT; i++) {
greth->txbd_base[i].addr = 0;
/* enable desciptor & set wrap bit if last descriptor */
- if (i >= (GRETH_RXBD_CNT - 1)) {
+ if (i >= (GRETH_TXBD_CNT - 1)) {
greth->txbd_base[i].stat = GRETH_BD_WR;
} else {
greth->txbd_base[i].stat = 0;
/* Enable Transmitter, GRETH will now scan descriptors for packets
* to transmitt */
-#ifdef DEBUG
- printf("greth_init: enabling receiver\n");
-#endif
+ debug("greth_init: enabling receiver\n");
GRETH_REGORIN(®s->control, GRETH_RXEN);
return 0;
greth_regs *regs = dev->regs;
int tmp, tmp1, tmp2, i;
unsigned int start, timeout;
+ int phyaddr = GRETH_PHY_ADR_DEFAULT;
+
+#ifndef CONFIG_SYS_GRLIB_GRETH_PHYADDR
+ /* If BSP doesn't provide a hardcoded PHY address the driver will
+ * try to autodetect PHY address by stopping the search on the first
+ * PHY address which has REG0 implemented.
+ */
+ for (i=0; i<32; i++) {
+ tmp = read_mii(i, 0, regs);
+ if ( (tmp != 0) && (tmp != 0xffff) ) {
+ phyaddr = i;
+ break;
+ }
+ }
+#endif
+
+ /* Save PHY Address */
+ dev->phyaddr = phyaddr;
+
+ debug("GRETH PHY ADDRESS: %d\n", phyaddr);
/* X msecs to ticks */
timeout = usec2ticks(GRETH_PHY_TIMEOUT_MS * 1000);
/* get phy control register default values */
- while ((tmp = read_mii(0, regs)) & 0x8000) {
- if (get_timer(start) > timeout)
+ while ((tmp = read_mii(phyaddr, 0, regs)) & 0x8000) {
+ if (get_timer(start) > timeout) {
+ debug("greth_init_phy: PHY read 1 failed\n");
return 1; /* Fail */
+ }
}
/* reset PHY and wait for completion */
- write_mii(0, 0x8000 | tmp, regs);
+ write_mii(phyaddr, 0, 0x8000 | tmp, regs);
- while (((tmp = read_mii(0, regs))) & 0x8000) {
- if (get_timer(start) > timeout)
+ while (((tmp = read_mii(phyaddr, 0, regs))) & 0x8000) {
+ if (get_timer(start) > timeout) {
+ debug("greth_init_phy: PHY read 2 failed\n");
return 1; /* Fail */
+ }
}
/* Check if PHY is autoneg capable and then determine operating
dev->sp = 0;
dev->auto_neg = 0;
if (!((tmp >> 12) & 1)) {
- write_mii(0, 0, regs);
+ write_mii(phyaddr, 0, 0, regs);
} else {
/* wait for auto negotiation to complete and then check operating mode */
dev->auto_neg = 1;
i = 0;
- while (!(((tmp = read_mii(1, regs)) >> 5) & 1)) {
+ while (!(((tmp = read_mii(phyaddr, 1, regs)) >> 5) & 1)) {
if (get_timer(start) > timeout) {
printf("Auto negotiation timed out. "
"Selecting default config\n");
- tmp = read_mii(0, regs);
+ tmp = read_mii(phyaddr, 0, regs);
dev->gb = ((tmp >> 6) & 1)
&& !((tmp >> 13) & 1);
dev->sp = !((tmp >> 6) & 1)
}
}
if ((tmp >> 8) & 1) {
- tmp1 = read_mii(9, regs);
- tmp2 = read_mii(10, regs);
+ tmp1 = read_mii(phyaddr, 9, regs);
+ tmp2 = read_mii(phyaddr, 10, regs);
if ((tmp1 & GRETH_MII_EXTADV_1000FD) &&
(tmp2 & GRETH_MII_EXTPRT_1000FD)) {
dev->gb = 1;
}
}
if ((dev->gb == 0) || ((dev->gb == 1) && (dev->gbit_mac == 0))) {
- tmp1 = read_mii(4, regs);
- tmp2 = read_mii(5, regs);
+ tmp1 = read_mii(phyaddr, 4, regs);
+ tmp2 = read_mii(phyaddr, 5, regs);
if ((tmp1 & GRETH_MII_100TXFD) &&
(tmp2 & GRETH_MII_100TXFD)) {
dev->sp = 1;
if ((dev->gb == 1) && (dev->gbit_mac == 0)) {
dev->gb = 0;
dev->fd = 0;
- write_mii(0, dev->sp << 13, regs);
+ write_mii(phyaddr, 0, dev->sp << 13, regs);
}
}
}
auto_neg_done:
-#ifdef DEBUG
- printf("%s GRETH Ethermac at [0x%x] irq %d. Running \
+ debug("%s GRETH Ethermac at [0x%x] irq %d. Running \
%d Mbps %s duplex\n", dev->gbit_mac ? "10/100/1000" : "10/100", (unsigned int)(regs), (unsigned int)(dev->irq), dev->gb ? 1000 : (dev->sp ? 100 : 10), dev->fd ? "full" : "half");
-#endif
/* Read out PHY info if extended registers are available */
if (tmp & 1) {
- tmp1 = read_mii(2, regs);
- tmp2 = read_mii(3, regs);
+ tmp1 = read_mii(phyaddr, 2, regs);
+ tmp2 = read_mii(phyaddr, 3, regs);
tmp1 = (tmp1 << 6) | ((tmp2 >> 10) & 0x3F);
tmp = tmp2 & 0xF;
tmp2 = (tmp2 >> 4) & 0x3F;
-#ifdef DEBUG
- printf("PHY: Vendor %x Device %x Revision %d\n", tmp1,
+ debug("PHY: Vendor %x Device %x Revision %d\n", tmp1,
tmp2, tmp);
-#endif
} else {
printf("PHY info not available\n");
}
greth_priv *greth;
greth_regs *regs;
int i;
-#ifdef DEBUG
- printf("greth_halt\n");
-#endif
+
+ debug("greth_halt\n");
+
if (!dev || !dev->priv)
return;
greth_bd *txbd;
void *txbuf;
unsigned int status;
-#ifdef DEBUG
- printf("greth_send\n");
-#endif
+
+ debug("greth_send\n");
+
/* send data, wait for data to be sent, then return */
if (((unsigned int)eth_data & (GRETH_BUF_ALIGN - 1))
&& !greth->gbit_mac) {
*/
if (!greth->txbuf) {
greth->txbuf = malloc(GRETH_RXBUF_SIZE);
-#ifdef DEBUG
- printf("GRETH: allocated aligned tx-buf\n");
-#endif
}
txbuf = greth->txbuf;
unsigned char *d;
int enable = 0;
int i;
-#ifdef DEBUG
-/* printf("greth_recv\n"); */
-#endif
+
/* Receive One packet only, but clear as many error packets as there are
* available.
*/
if (status & GRETH_BD_EN) {
goto done;
}
-#ifdef DEBUG
- printf("greth_recv: packet 0x%lx, 0x%lx, len: %d\n",
+
+ debug("greth_recv: packet 0x%lx, 0x%lx, len: %d\n",
(unsigned int)rxbd, status, status & GRETH_BD_LEN);
-#endif
/* Check status for errors.
*/
for (i = 0; i < GRETH_RXBD_CNT; i++) {
printf("[%d]: Stat=0x%lx, Addr=0x%lx\n", i,
GRETH_REGLOAD(&greth->rxbd_base[i].stat),
- GRETH_REGLOAD(&greth->rxbd_base[i].
- addr));
+ GRETH_REGLOAD(&greth->rxbd_base[i].addr));
}
} else {
/* Process the incoming packet. */
len = status & GRETH_BD_LEN;
d = (char *)rxbd->addr;
-#ifdef DEBUG
- printf
+
+ debug
("greth_recv: new packet, length: %d. data: %x %x %x %x %x %x %x %x\n",
len, d[0], d[1], d[2], d[3], d[4], d[5], d[6],
d[7]);
-#endif
+
/* flush all data cache to make sure we're not reading old packet data */
sparc_dcache_flush_all();
(unsigned int)greth->rxbd_max) ? greth->
rxbd_base : (greth->rxbd_curr + 1);
- };
+ }
if (enable) {
GRETH_REGORIN(®s->control, GRETH_RXEN);
greth->regs->esa_msb = (mac[0] << 8) | mac[1];
greth->regs->esa_lsb =
(mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5];
-#ifdef DEBUG
- printf("GRETH: New MAC address: %02x:%02x:%02x:%02x:%02x:%02x\n",
+
+ debug("GRETH: New MAC address: %02x:%02x:%02x:%02x:%02x:%02x\n",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-#endif
}
int greth_initialize(bd_t * bis)
int i;
char *addr_str, *end;
unsigned char addr[6];
-#ifdef DEBUG
- printf("Scanning for GRETH\n");
-#endif
+
+ debug("Scanning for GRETH\n");
+
/* Find Device & IRQ via AMBA Plug&Play information */
if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_ETHMAC, &apbdev) != 1) {
return -1; /* GRETH not found */
greth->regs = (greth_regs *) apbdev.address;
greth->irq = apbdev.irq;
-#ifdef DEBUG
- printf("Found GRETH at 0x%lx, irq %d\n", greth->regs, greth->irq);
-#endif
+ debug("Found GRETH at 0x%lx, irq %d\n", greth->regs, greth->irq);
dev->priv = (void *)greth;
dev->iobase = (unsigned int)greth->regs;
dev->init = greth_init;
/* Make descriptor string */
if (greth->gbit_mac) {
- sprintf(dev->name, "GRETH 10/100/GB");
+ sprintf(dev->name, "GRETH_10/100/GB");
} else {
- sprintf(dev->name, "GRETH 10/100");
+ sprintf(dev->name, "GRETH_10/100");
}
/* initiate PHY, select speed/duplex depending on connected PHY */
if (greth_init_phy(greth, bis)) {
/* Failed to init PHY (timedout) */
+ debug("GRETH[0x%08x]: Failed to init PHY\n", greth->regs);
return -1;
}
/* set and remember MAC address */
greth_set_hwaddr(greth, addr);
+ debug("GRETH[0x%08x]: Initialized successfully\n", greth->regs);
return 0;
}
include $(TOPDIR)/config.mk
-LIB := $(obj)libphy.a
+LIB := $(obj)libphy.o
COBJS-$(CONFIG_BITBANGMII) += miiphybb.o
COBJS-$(CONFIG_MV88E61XX_SWITCH) += mv88e61xx.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libpci.a
+LIB := $(obj)libpci.o
COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o
COBJS-$(CONFIG_PCI) += pci.o pci_auto.o pci_indirect.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
".section __ex_table,\"a\"\n"
" .align 2\n"
" .long 1b,3b\n"
- ".text":"=r"(retval):"r"(addr));
+ ".section .text.__get_pci_config_dword"
+ : "=r"(retval) : "r"(addr));
return (retval);
}
include $(TOPDIR)/config.mk
-LIB := $(obj)libpcmcia.a
+LIB := $(obj)libpcmcia.o
COBJS-$(CONFIG_I82365) += i82365.o
COBJS-$(CONFIG_8xx) += mpc8xx_pcmcia.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libpower.a
+LIB := $(obj)libpower.o
COBJS-$(CONFIG_TWL4030_POWER) += twl4030.o
COBJS-$(CONFIG_TWL6030_POWER) += twl6030.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)qe.a
+LIB := $(obj)libqe.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+COBJS-$(and $(CONFIG_QE),$(CONFIG_OF_LIBFDT)) += fdt.o
COBJS-$(CONFIG_QE) += qe.o uccf.o uec.o uec_phy.o
COBJS := $(COBJS-y)
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
void ft_qe_setup(void *blob)
{
-#ifdef CONFIG_QE
do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
"bus-frequency", gd->qe_clk, 1);
do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
do_fixup_by_compat_u32(blob, "fsl,qe-gtm",
"clock-frequency", gd->qe_clk / 2, 1);
fdt_fixup_qe_firmware(blob);
-#endif
}
#CFLAGS += -DDEBUG
-LIB = $(obj)librtc.a
+LIB = $(obj)librtc.o
COBJS-$(CONFIG_RTC_AT91SAM9_RTT) += at91sam9_rtt.o
COBJS-$(CONFIG_RTC_BFIN) += bfin_rtc.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libserial.a
+LIB := $(obj)libserial.o
COBJS-$(CONFIG_ALTERA_UART) += altera_uart.o
COBJS-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libspi.a
+LIB := $(obj)libspi.o
COBJS-$(CONFIG_ALTERA_SPI) += altera_spi.o
COBJS-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libtws.a
+LIB := $(obj)libtws.o
COBJS-$(CONFIG_SOFT_TWS) += soft_tws.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libusb_gadget.a
+LIB := $(obj)libusb_gadget.o
# new USB gadget layer dependencies
ifdef CONFIG_USB_ETHER
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libusb_host.a
+LIB := $(obj)libusb_host.o
# ohci
COBJS-$(CONFIG_USB_OHCI_NEW) += ohci-hcd.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
#include <usb.h>
#include <asm/io.h>
#include <malloc.h>
+#include <watchdog.h>
#include "ehci.h"
int ret = 0;
cmd = ehci_readl(&hcor->or_usbcmd);
- cmd |= CMD_RESET;
+ cmd = (cmd & ~CMD_RUN) | CMD_RESET;
ehci_writel(&hcor->or_usbcmd, cmd);
ret = handshake((uint32_t *)&hcor->or_usbcmd, CMD_RESET, 0, 250 * 1000);
if (ret < 0) {
token = hc32_to_cpu(vtd->qt_token);
if (!(token & 0x80))
break;
+ WATCHDOG_RESET();
} while (get_timer(ts) < CONFIG_SYS_HZ);
/* Disable async schedule. */
break;
default:
dev->status = USB_ST_CRC_ERR;
+ if ((token & 0x40) == 0x40)
+ dev->status |= USB_ST_STALLED;
break;
}
dev->act_len = length - ((token >> 16) & 0x7fff);
hccr = (struct ehci_hccr *)(CONFIG_SYS_PPC4XX_USB_ADDR);
hcor = (struct ehci_hcor *)((uint32_t) hccr +
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
- usb_dev_init();
return 0;
}
include $(TOPDIR)/config.mk
-LIB := $(obj)libusb_musb.a
+LIB := $(obj)libusb_musb.o
COBJS-$(CONFIG_MUSB_HCD) += musb_hcd.o musb_core.o
COBJS-$(CONFIG_MUSB_UDC) += musb_udc.o musb_core.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libusb_phy.a
+LIB := $(obj)libusb_phy.o
COBJS-$(CONFIG_TWL4030_USB) += twl4030.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libvideo.a
+LIB := $(obj)libvideo.o
COBJS-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o videomodes.o
COBJS-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
COBJS-$(CONFIG_CFB_CONSOLE) += cfb_console.o
+COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o
COBJS-$(CONFIG_S6E63D6) += s6e63d6.o
COBJS-$(CONFIG_VIDEO_AMBA) += amba.o
COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB := $(obj)libwatchdog.a
+LIB := $(obj)libwatchdog.o
COBJS-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
COBJS := $(ELF:=.o)
-LIB = $(obj)libstubs.a
+LIB = $(obj)libstubs.o
LIBAOBJS-$(ARCH) :=
LIBAOBJS-$(CPU) :=
#########################################################################
$(LIB): $(obj).depend $(LIBOBJS)
- $(AR) $(ARFLAGS) $@ $(LIBOBJS)
+ $(call cmd_link_o_target, $(LIBOBJS))
$(ELF):
$(obj)%: $(obj)%.o $(LIB)
include $(TOPDIR)/config.mk
-LIB = $(obj)libcramfs.a
+LIB = $(obj)libcramfs.o
AOBJS =
COBJS-$(CONFIG_CMD_CRAMFS) := cramfs.o
all: $(LIB) $(AOBJS)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)libext2fs.a
+LIB = $(obj)libext2fs.o
AOBJS =
COBJS-$(CONFIG_CMD_EXT2) := ext2fs.o dev.o
all: $(LIB) $(AOBJS)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)libfat.a
+LIB = $(obj)libfat.o
AOBJS =
COBJS-$(CONFIG_CMD_FAT) := fat.o file.o
all: $(LIB) $(AOBJS)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)libfdos.a
+LIB = $(obj)libfdos.o
AOBJS =
COBJS-$(CONFIG_CMD_FDOS) := fat.o vfat.o dev.o fdos.o fs.o subdir.o
all: $(LIB) $(AOBJS)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)libjffs2.a
+LIB = $(obj)libjffs2.o
AOBJS =
ifdef CONFIG_CMD_JFFS2
all: $(LIB) $(AOBJS)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)libreiserfs.a
+LIB = $(obj)libreiserfs.o
AOBJS =
COBJS-$(CONFIG_CMD_REISER) := reiserfs.o dev.o mode_string.o
all: $(LIB) $(AOBJS)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)libubifs.a
+LIB = $(obj)libubifs.o
COBJS-$(CONFIG_CMD_UBIFS) := ubifs.o io.o super.o sb.o master.o lpt.o
COBJS-$(CONFIG_CMD_UBIFS) += lpt_commit.o scan.o lprops.o
all: $(LIB) $(AOBJS)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
* through mounting (error path cleanup function). So it has to make sure the
* resource was actually allocated before freeing it.
*/
-static void ubifs_umount(struct ubifs_info *c)
+void ubifs_umount(struct ubifs_info *c)
{
dbg_gen("un-mounting UBI device %d, volume %d", c->vi.ubi_num,
c->vi.vol_id);
*
* Copyright (C) 2006-2008 Nokia Corporation.
*
- * (C) Copyright 2008-2009
+ * (C) Copyright 2008-2010
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* This program is free software; you can redistribute it and/or modify it
unsigned long root_inum = 1;
unsigned long inum;
int symlink_count = 0; /* Don't allow symlink recursion */
+ char link_name[64];
strcpy(fpath, filename);
ui = ubifs_inode(inode);
if ((inode->i_mode & S_IFMT) == S_IFLNK) {
- char link_name[64];
char buf[128];
/* We have some sort of symlink recursion, bail out */
return -EINVAL;
}
-static int do_readpage(struct ubifs_info *c, struct inode *inode, struct page *page)
+static int do_readpage(struct ubifs_info *c, struct inode *inode,
+ struct page *page, int last_block_size)
{
void *addr;
int err = 0, i;
err = -ENOENT;
memset(addr, 0, UBIFS_BLOCK_SIZE);
} else {
- ret = read_block(inode, addr, block, dn);
- if (ret) {
- err = ret;
- if (err != -ENOENT)
+ /*
+ * Reading last block? Make sure to not write beyond
+ * the requested size in the destination buffer.
+ */
+ if (((block + 1) == beyond) || last_block_size) {
+ void *buff;
+ int dlen;
+
+ /*
+ * We need to buffer the data locally for the
+ * last block. This is to not pad the
+ * destination area to a multiple of
+ * UBIFS_BLOCK_SIZE.
+ */
+ buff = malloc(UBIFS_BLOCK_SIZE);
+ if (!buff) {
+ printf("%s: Error, malloc fails!\n",
+ __func__);
+ err = -ENOMEM;
break;
- } else if (block + 1 == beyond) {
- int dlen = le32_to_cpu(dn->size);
- int ilen = i_size & (UBIFS_BLOCK_SIZE - 1);
-
- if (ilen && ilen < dlen)
- memset(addr + ilen, 0, dlen - ilen);
+ }
+
+ /* Read block-size into temp buffer */
+ ret = read_block(inode, buff, block, dn);
+ if (ret) {
+ err = ret;
+ if (err != -ENOENT) {
+ free(buff);
+ break;
+ }
+ }
+
+ if (last_block_size)
+ dlen = last_block_size;
+ else
+ dlen = le32_to_cpu(dn->size);
+
+ /* Now copy required size back to dest */
+ memcpy(addr, buff, dlen);
+
+ free(buff);
+ } else {
+ ret = read_block(inode, addr, block, dn);
+ if (ret) {
+ err = ret;
+ if (err != -ENOENT)
+ break;
+ }
}
}
if (++i >= UBIFS_BLOCKS_PER_PAGE)
int err = 0;
int i;
int count;
+ int last_block_size = 0;
c->ubi = ubi_open_volume(c->vi.ubi_num, c->vi.vol_id, UBI_READONLY);
/* ubifs_findfile will resolve symlinks, so we know that we get
page.index = 0;
page.inode = inode;
for (i = 0; i < count; i++) {
- err = do_readpage(c, inode, &page);
+ /*
+ * Make sure to not read beyond the requested size
+ */
+ if (((i + 1) == count) && (size < inode->i_size))
+ last_block_size = size - (i * PAGE_SIZE);
+
+ err = do_readpage(c, inode, &page, last_block_size);
if (err)
break;
#EXTRA_COMPILE_FLAGS = -DYAFFS_IGNORE_TAGS_ECC
include $(TOPDIR)/config.mk
-LIB = $(obj)libyaffs2.a
+LIB = $(obj)libyaffs2.o
COBJS-$(CONFIG_YAFFS2) := \
yaffscfg.o yaffs_ecc.o yaffsfs.o yaffs_guts.o yaffs_packedtags1.o \
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
.PHONY: clean distclean
clean:
#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */
+/*
+ * I2C
+ */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SPEED 400000
+
/*
* Miscellaneous configurable options
*/
#define CONFIG_CMD_EEPROM
#undef CONFIG_CMD_NET
-
+#undef CONFIG_CMD_NFS
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_PPCHAMELEONEVB 1 /* ...on a PPChameleonEVB board */
#define CONFIG_SYS_TEXT_BASE 0xFFFB0000 /* Reserve 320 kB for Monitor */
+#define CONFIG_SYS_LDSCRIPT "board/dave/PPChameleonEVB/u-boot.lds"
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
#define CONFIG_CMD_EEPROM
#undef CONFIG_CMD_NET
-
+#undef CONFIG_CMD_NFS
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_CMD_EEPROM
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#undef CONFIG_WATCHDOG /* watchdog disabled */
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_405GP 1 /* This is a PPC405 CPU */
-#define CONFIG_4xx 1 /* ...member of PPC4xx family */
-#define CONFIG_ERIC 1 /* ...on a ERIC board */
-
-#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* run board_early_init_f() */
-
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-
-#if 1
-#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
-#endif
-#if 0
-#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
-#endif
-#if 0
-#define CONFIG_ENV_IS_IN_EEPROM 1 /* use I2C RTC X1240 for environment vars */
-#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
-#define CONFIG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars */
-#endif /* total size of a X1240 is 2048 bytes */
-
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* X1240 has two I2C slave addresses, one for EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* address length for the eeprom */
-#define CONFIG_I2C_RTC 1 /* we have a Xicor X1240 RTC */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x6F /* and one for RTC */
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_EEPROM
-#else
-#ifdef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_EEPROM
-#else
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-#endif
-#endif
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
-
-#if 1
-#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */
-#else
-#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */
-#endif
-
-#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/nfs " \
- "nfsroot=192.168.1.2:/eric_root_devel " \
- "ip=192.168.1.22:192.168.1.2"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-#define CONFIG_PPC4xx_EMAC
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_PHY_ADDR 1 /* PHY address */
-#define CONFIG_NET_MULTI
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#undef CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_serial_clock()
-
-#define CONFIG_SYS_EXT_SERIAL_CLOCK 14318180
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
- 57600, 115200, 230400, 460800, 921600 }
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#undef CONFIG_PCI_PNP /* no pci plug-and-play */
- /* resource configuration */
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1743 /* PCI Vendor ID: Peppercon AG */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: 405GP */
-#define CONFIG_SYS_PCI_PTM1LA 0xFFFC0000 /* point to flash */
-#define CONFIG_SYS_PCI_PTM1MS 0xFFFFF001 /* 4kB, enable hard-wired to 1 */
-#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
-#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */
-#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */
-#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
-
-/*-----------------------------------------------------------------------
- * External peripheral base address
- *-----------------------------------------------------------------------
- */
-/* Bank 0 - Flash/SRAM 0xFF000000 16MB 16 Bit */
-/* Bank 1 - NVRAM/RTC 0xF0000000 1MB 8 Bit */
-/* Bank 2 - A/D converter 0xF0100000 1MB 8 Bit */
-/* Bank 3 - Ethernet PHY Reset 0xF0200000 1MB 8 Bit */
-/* Bank 4 - PC-MIP PRSNT1# 0xF0300000 1MB 8 Bit */
-/* Bank 5 - PC-MIP PRSNT2# 0xF0400000 1MB 8 Bit */
-/* Bank 6 - CPU LED0 0xF0500000 1MB 8 Bit */
-/* Bank 7 - CPU LED1 0xF0600000 1MB 8 Bit */
-
-/* ----------------------------------------------------------------------- */
-/* Memory Bank 0 (Flash) initialization */
-/* ----------------------------------------------------------------------- */
-#define CS0_AP 0x9B015480
-#define CS0_CR 0xFF87A000 /* BAS=0xFF8,BS=(8MB),BU=0x3(R/W), BW=(16 bits) */
-/* ----------------------------------------------------------------------- */
-/* Memory Bank 1 (NVRAM/RTC) initialization */
-/* ----------------------------------------------------------------------- */
-#define CS1_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
-#define CS1_CR 0xF0018000 /* BAS=0xF00,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
- /* ----------------------------------------------------------------------- */
- /* Memory Bank 2 (A/D converter) initialization */
- /* ----------------------------------------------------------------------- */
-#define CS2_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
-#define CS2_CR 0xF0118000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
-/* ----------------------------------------------------------------------- */
-/* Memory Bank 3 (Ethernet PHY Reset) initialization */
-/* ----------------------------------------------------------------------- */
-#define CS3_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
-#define CS3_CR 0xF0218000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
-/* ----------------------------------------------------------------------- */
-/* Memory Bank 4 (PC-MIP PRSNT1#) initialization */
-/* ----------------------------------------------------------------------- */
-#define CS4_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
-#define CS4_CR 0xF0318000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
-/* ----------------------------------------------------------------------- */
-/* Memory Bank 5 (PC-MIP PRSNT2#) initialization */
-/* ----------------------------------------------------------------------- */
-#define CS5_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
-#define CS5_CR 0xF0418000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
-/* ----------------------------------------------------------------------- */
-/* Memory Bank 6 (CPU LED0) initialization */
-/* ----------------------------------------------------------------------- */
-#define CS6_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
-#define CS6_CR 0xF0518000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
-/* ----------------------------------------------------------------------- */
-/* Memory Bank 7 (CPU LED1) initialization */
-/* ----------------------------------------------------------------------- */
-#define CS7_AP 0x02815480 /* WT=1, OEN=0x1,WBN=0x1,WBF=0x1,TH=0x2,RE=0, */
-#define CS7_CR 0xF0618000 /* BAS=0xF01,BS=(1MB),BU=0x3(R/W), BW=(8 bits) */
-
-#define CONFIG_SYS_NVRAM_REG_BASE_ADDR 0xF0000000
-#define CONFIG_SYS_RTC_REG_BASE_ADDR (0xF0000000 + 0x7F8)
-#define CONFIG_SYS_ADC_REG_BASE_ADDR 0xF0100000
-#define CONFIG_SYS_PHYRES_REG_BASE_ADDR 0xF0200000
-#define CONFIG_SYS_PRSNT1_REG_BASE_ADDR 0xF0300000
-#define CONFIG_SYS_PRSNT2_REG_BASE_ADDR 0xF0400000
-#define CONFIG_SYS_LED0_REG_BASE_ADDR 0xF0500000
-#define CONFIG_SYS_LED1_REG_BASE_ADDR 0xF0600000
-
-
-/* SDRAM CONFIG */
-#define CONFIG_SYS_SDRAM_MANUALLY 1
-#define CONFIG_SYS_SDRAM_SINGLE_BANK 1
-
-#ifdef CONFIG_SYS_SDRAM_MANUALLY
-/*-----------------------------------------------------------------------
- * Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2)
- *----------------------------------------------------------------------*/
-#define MB0CF 0x00062001 /* 32MB @ 0 */
-/*-----------------------------------------------------------------------
- * Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2)
- *----------------------------------------------------------------------*/
-#ifdef CONFIG_SYS_SDRAM_SINGLE_BANK
-#define MB1CF 0x0 /* 0MB @ 32MB */
-#else
-#define MB1CF 0x02062001 /* 32MB @ 32MB */
-#endif
-/*-----------------------------------------------------------------------
- * Set MB2CF for bank 2. off
- *----------------------------------------------------------------------*/
-#define MB2CF 0x0 /* 0MB */
-/*-----------------------------------------------------------------------
- * Set MB3CF for bank 3. off
- *----------------------------------------------------------------------*/
-#define MB3CF 0x0 /* 0MB */
-
-#define SDTR_100 0x0086400D
-#define RTR_100 0x05F0
-#define SDTR_66 0x00854006 /* orig U-Boot-wallnut says 0x00854006 */
-#define RTR_66 0x03f8
-
-#endif /* CONFIG_SYS_SDRAM_MANUALLY */
-
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_SIZE 32
-#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* 8 MByte Flash */
-#define CONFIG_SYS_MONITOR_BASE 0xFFFE0000 /* last 128kByte within Flash */
-/*#define CONFIG_SYS_MONITOR_LEN (192 * 1024)*/ /* Reserve 196 kB for Monitor */
-#define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* Reserve 128 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
-#define CONFIG_SYS_FLASH_16BIT 1 /* Rom 16 bit data bus */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/* BEG ENVIRONNEMENT FLASH */
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE (128*1024)
-
-#if 0 /* force ENV to be NOT embedded */
-#define CONFIG_ENV_ADDR 0xfffa0000
-#else /* force ENV to be embedded */
-#define CONFIG_ENV_SIZE (2 * 1024) /* Total Size of Environment Sector 2k */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - CONFIG_ENV_SIZE - 0x10) /* let space for reset vector */
-/* #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE)*/
-#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#endif
-
-#endif
-/* END ENVIRONNEMENT FLASH */
-/*-----------------------------------------------------------------------
- * NVRAM organization
- */
-#define CONFIG_SYS_NVRAM_BASE_ADDR CONFIG_SYS_NVRAM_REG_BASE_ADDR /* NVRAM base address */
-#define CONFIG_SYS_NVRAM_SIZE 0x7F8 /* NVRAM size 2kByte - 8 Byte for RTC */
-
-#ifdef CONFIG_ENV_IS_IN_NVRAM
-#define CONFIG_ENV_SIZE 0x7F8 /* Size of Environment vars */
-#define CONFIG_ENV_ADDR \
- (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */
-#endif
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 8MB */
-#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
-
-
-/* Configuration Port location */
-/* #define CONFIG_PORT_ADDR 0xF0000500 */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Definitions for Serial Presence Detect EEPROM address
- * (to get SDRAM settings)
- */
-#define SPD_EEPROM_ADDRESS 0x50
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-#endif /* __CONFIG_H */
#define CONFIG_SYS_GT_6426x GT_64260 /* with a 64260 system controller */
#define CONFIG_SYS_TEXT_BASE 0xfff00000
+#define CONFIG_SYS_LDSCRIPT "board/evb64260/u-boot.lds"
#define CONFIG_BAUDRATE 38400 /* console baudrate = 38400 */
*/
-#define CONFIG_WINBOND_83C553 1 /*has a winbond bridge */
+/* #define CONFIG_WINBOND_83C553 1 / *has a winbond bridge */
#define CONFIG_SYS_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */
#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */
#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */
#define CONFIG_CMD_JFFS2
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_RTC
#undef CONFIG_CMD_PCI
#undef CONFIG_CMD_I2C
#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */
+/*
+ * I2C
+ */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SPEED 400000
+
/*
* Miscellaneous configurable options
*/
#define CONFIG_MPC8313 1
#define CONFIG_MPC8313ERDB 1
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 16384
+#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
+#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
+
+#ifdef CONFIG_NAND_U_BOOT
+#define CONFIG_SYS_TEXT_BASE 0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
+#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
+#endif /* CONFIG_NAND_SPL */
+#endif /* CONFIG_NAND_U_BOOT */
+
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xFE000000
#endif
+#ifndef CONFIG_SYS_MONITOR_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#endif
+
#define CONFIG_PCI
#define CONFIG_FSL_ELBC 1
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && !defined(CONFIG_NAND_SPL)
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_NAND_FSL_ELBC 1
#define CONFIG_SYS_NAND_BLOCK_SIZE 16384
-#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 16384
-#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
#define CONFIG_SYS_NAND_BR_PRELIM ( CONFIG_SYS_NAND_BASE \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
#ifndef __CONFIG_H
#define __CONFIG_H
-#ifdef CONFIG_NAND
-#define CONFIG_NAND_U_BOOT 1
-#define CONFIG_SYS_TEXT_BASE 0x00100000
-#endif
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 16384
+#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
+
+#ifdef CONFIG_NAND_U_BOOT
+#define CONFIG_SYS_TEXT_BASE 0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
+#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
+#endif /* CONFIG_NAND_SPL */
+#endif /* CONFIG_NAND_U_BOOT */
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xFE000000
#endif
+#ifndef CONFIG_SYS_MONITOR_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#endif
+
/*
* High Level Configuration Options
*/
/*
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
/*
* CS4 on Local Bus, to PIB
*/
-#define CONFIG_SYS_BR4_PRELIM 0xf8010801 /* CS4 base address at 0xf8010000 */
+#define CONFIG_SYS_BR4_PRELIM 0xf8008801 /* CS4 base address at 0xf8008000 */
#define CONFIG_SYS_OR4_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
/*
* CS5 on Local Bus, to PIB
*/
-#define CONFIG_SYS_BR5_PRELIM 0xf8008801 /* CS5 base address at 0xf8008000 */
+#define CONFIG_SYS_BR5_PRELIM 0xf8010801 /* CS5 base address at 0xf8010000 */
#define CONFIG_SYS_OR5_PRELIM 0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
/*
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
- || defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
+#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \
+ defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
#else
#undef CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND)
+#if defined(CONFIG_RAMBOOT_NAND)
#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
#else
#undef CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
+#define CONFIG_HWCONFIG /* enable hwconfig */
#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */
#define PIXIS_BASE 0xffdf0000 /* PIXIS registers */
#ifdef CONFIG_PHYS_64BIT
#define MVBLUE_BOARD_LYNX 2
#define CONFIG_SYS_TEXT_BASE 0xFFF00000
+#define CONFIG_SYS_LDSCRIPT "board/mvblue/u-boot.lds"
#if 0
#define ERR_LED(code) do { if (code) \
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_ENV_SECT_SIZE 0x10000
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000)
-#define CONFIG_ENV_OFFSET 0
#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_OFFSET_REDUND 0
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
/*-----------------------------------------------------------------------
/*
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_ENV_SECT_SIZE 0x10000
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000)
-#define CONFIG_ENV_OFFSET 0
#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_OFFSET_REDUND 0
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
/*-----------------------------------------------------------------------
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_ENV_SECT_SIZE 0x10000
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000)
-#define CONFIG_ENV_OFFSET 0
#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_OFFSET_REDUND 0
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
/*-----------------------------------------------------------------------
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
- || defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
+#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \
+ defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
#else
#undef CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_PPCHAMELEONEVB 1 /* ...on a PPChameleonEVB board */
#define CONFIG_SYS_TEXT_BASE 0xFFFB0000 /* Reserve 320 kB for Monitor */
+#define CONFIG_SYS_LDSCRIPT "board/dave/PPChameleonEVB/u-boot.lds"
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
#define CONFIG_MPC831x 1
#define CONFIG_MPC8313 1
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
+#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
+#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
+
+#define CONFIG_SYS_TEXT_BASE 0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
+#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
+
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
+#else
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#endif
#define CONFIG_PCI
*/
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-
#if !defined(CONFIG_NAND_SPL)
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_CMD_NAND 1
#define CONFIG_NAND_FSL_ELBC 1
-#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
-#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
-
#define CONFIG_SYS_NAND_BR_PRELIM ( CONFIG_SYS_NAND_BASE \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8 bit */ \
#define CONFIG_SANDPOINT 1
#define CONFIG_SYS_TEXT_BASE 0xFFF00000
+#define CONFIG_SYS_LDSCRIPT "board/sandpoint/u-boot.lds"
#if 0
#define USE_DINK32 1
*/
-#define CONFIG_WINBOND_83C553 1 /*has a winbond bridge */
+/* #define CONFIG_WINBOND_83C553 1 / *has a winbond bridge */
#define CONFIG_SYS_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */
#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */
#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */
#define CONFIG_SANDPOINT 1
#define CONFIG_SYS_TEXT_BASE 0xFFF00000
+#define CONFIG_SYS_LDSCRIPT "board/sandpoint/u-boot.lds"
#if 0
#define USE_DINK32 1
*/
-#define CONFIG_WINBOND_83C553 1 /*has a winbond bridge */
+/* #define CONFIG_WINBOND_83C553 1 / *has a winbond bridge */
#define CONFIG_SYS_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */
#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */
#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */
/* use CFI flash driver */
#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CONFIG_FLASH_CFI_MTD /* with MTD support */
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START }
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks
(= chip selects) */
/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
#define MTDIDS_DEFAULT "nor0=TQM5200-0"
#ifdef CONFIG_STK52XX
#define CONFIG_DRIVER_OMAP34XX_I2C 1
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
/*
* Board NAND Info.
*/
extern unsigned int boot_flash_type;
#endif
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
#define CONFIG_E300 1 /* E300 Family */
#define CONFIG_MPC512X 1 /* MPC512X family */
#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */
-#define CONFIG_FSL_DIU_LOGO_BMP 1 /* Don't include FSL DIU binary bmp */
#define CONFIG_SYS_TEXT_BASE 0xFFF00000
#include <asm/sizes.h>
+/*
+ * set some initial configurations depending on configure target
+ *
+ * at91rm9200ek_config -> boot from 0x0 in NOR Flash at CS0
+ * at91rm9200ek_ram_config -> continue booting from 0x20100000 in RAM; lowlevel
+ * initialisation was done by some preloader
+ */
+#ifdef CONFIG_RAMBOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0x20100000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x10000000
+#endif
+
/*
* AT91C_XTAL_CLOCK is the frequency of external xtal in hertz
* AT91C_MAIN_CLOCK is the frequency of PLLA output
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
+#define CONFIG_AT91FAMILY
+
/*
* Memory Configuration
*/
#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */
#define CONFIG_SYS_SDRAM CONFIG_SYS_SDRAM_BASE /* address of the SDRAM */
-#define CONFIG_SYS_SDRAM1 CONFIG_SYS_SDRAM_BASE /* address of the SDRAM */
+#define CONFIG_SYS_SDRAM1 (CONFIG_SYS_SDRAM_BASE+0x80)
#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_DOS_PARTITION 1
-
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_ENV
#undef CONFIG_CMD_IMLS
#define CONFIG_CMD_USB
+++ /dev/null
-/********************************************************************
- *
- * Unless otherwise specified, Copyright (C) 2004-2005 Barco Control Rooms
- *
- * $Source: /home/services/cvs/firmware/ppc/u-boot-1.1.2/include/configs/barco.h,v $
- * $Revision: 1.2 $
- * $Author: mleeman $
- * $Date: 2005/02/21 12:48:58 $
- *
- * Last ChangeLog Entry
- * $Log: barco.h,v $
- * Revision 1.2 2005/02/21 12:48:58 mleeman
- * update of copyright years (feedback wd)
- *
- * Revision 1.1 2005/02/14 09:29:25 mleeman
- * moved barcohydra.h to barco.h
- *
- * Revision 1.4 2005/02/09 12:56:23 mleeman
- * add generic header to track changes in sources
- *
- *
- *******************************************************************/
-
-/*
- * (C) Copyright 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC824X 1
-#define CONFIG_MPC8245 1
-#define CONFIG_BARCOBCD_STREAMING 1
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#undef USE_DINK32
-
-#define CONFIG_CONS_INDEX 3 /* set to '3' for on-chip DUART */
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_DRAM_SPEED 100 /* MHz */
-
-#define CONFIG_BOOTARGS "mem=32M"
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_DNS
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_PCI
-
-#undef CONFIG_CMD_NET
-
-
-#define CONFIG_HUSH_PARSER 1 /* use "hush" command parser */
-#define CONFIG_BOOTDELAY 1
-#define CONFIG_BOOTCOMMAND "boot_default"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI /* include pci support */
-#undef CONFIG_PCI_PNP
-
-#define PCI_ENET0_IOADDR 0x80000000
-#define PCI_ENET0_MEMADDR 0x80000000
-#define PCI_ENET1_IOADDR 0x81000000
-#define PCI_ENET1_MEMADDR 0x81000000
-
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_MAX_RAM_SIZE 0x02000000
-
-#define CONFIG_LOGBUFFER
-#ifdef CONFIG_LOGBUFFER
-#define CONFIG_SYS_STDOUT_ADDR 0x1FFC000
-#define CONFIG_SYS_POST_WORD_ADDR \
- (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE - 4)
-#else
-#define CONFIG_SYS_STDOUT_ADDR 0x2B9000
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#if defined (USE_DINK32)
-#define CONFIG_SYS_MONITOR_LEN 0x00030000
-#define CONFIG_SYS_MONITOR_BASE 0x00090000
-#define CONFIG_SYS_RAMBOOT 1
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#else
-#undef CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_MONITOR_LEN 0x00030000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#endif
-
-#define CONFIG_SYS_FLASH_BASE 0xFFF00000
-#define CONFIG_SYS_FLASH_SIZE (8 * 1024 * 1024) /* Unity has onboard 1MByte flash */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x000047A4 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */
-/* #define ENV_CRC 0x8BF6F24B XXX - FIXME: gets defined automatically */
-
-#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
-
-#define CONFIG_SYS_EUMB_ADDR 0xFDF00000
-
-#define CONFIG_SYS_FLASH_RANGE_BASE 0xFFC00000 /* flash memory address range */
-#define CONFIG_SYS_FLASH_RANGE_SIZE 0x00400000
-#define FLASH_BASE0_PRELIM 0xFFF00000 /* sandpoint flash */
-#define FLASH_BASE1_PRELIM 0xFF000000 /* PMC onboard flash */
-
-/*
- * select i2c support configuration
- *
- * Supported configurations are {none, software, hardware} drivers.
- * If the software driver is chosen, there are some additional
- * configuration items that the driver uses to drive the port pins.
- */
-#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-#ifdef CONFIG_SOFT_I2C
-#error "Soft I2C is not configured properly. Please review!"
-#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE (iop->pdir |= 0x00010000)
-#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
-#define I2C_READ ((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
- else iop->pdat &= ~0x00010000
-#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
- else iop->pdat &= ~0x00020000
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SOFT_I2C */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
-#define CONFIG_SYS_DBUS_SIZE2 1
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-
-
- /*
- * NS16550 Configuration (internal DUART)
- */
- /*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-
-#define CONFIG_SYS_ROMNAL 0x0F /*rom/flash next access time */
-#define CONFIG_SYS_ROMFAL 0x1E /*rom/flash access time */
-
-#define CONFIG_SYS_REFINT 0x8F /* no of clock cycles between CBR refresh cycles */
-
-/* the following are for SDRAM only*/
-#define CONFIG_SYS_BSTOPRE 0x25C /* Burst To Precharge, sets open page interval */
-#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */
-#define CONFIG_SYS_RDLAT 4 /* data latency from read command */
-#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */
-#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */
-#define CONFIG_SYS_ACTORW 2 /* Activate to R/W */
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
-#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
-
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM 0
-#define CONFIG_SYS_REGDIMM 0
-
-
-/* memory bank settings*/
-/*
- * only bits 20-29 are actually used from these vales to set the
- * start/end address the upper two bits will be 0, and the lower 20
- * bits will be set to 0x00000 for a start address, or 0xfffff for an
- * end address
- */
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END 0x01FFFFFF
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x02000000
-#define CONFIG_SYS_BANK1_END 0x02ffffff
-#define CONFIG_SYS_BANK1_ENABLE 0
-#define CONFIG_SYS_BANK2_START 0x03f00000
-#define CONFIG_SYS_BANK2_END 0x03ffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x04000000
-#define CONFIG_SYS_BANK3_END 0x04ffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x05000000
-#define CONFIG_SYS_BANK4_END 0x05FFFFFF
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x06000000
-#define CONFIG_SYS_BANK5_END 0x06FFFFFF
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x07000000
-#define CONFIG_SYS_BANK6_END 0x07FFFFFF
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x08000000
-#define CONFIG_SYS_BANK7_END 0x08FFFFFF
-#define CONFIG_SYS_BANK7_ENABLE 0
-/*
- * Memory bank enable bitmask, specifying which of the banks defined above
- are actually present. MSB is for bank #7, LSB is for bank #0.
- */
-#define CONFIG_SYS_BANK_ENABLE 0x01
-
-#define CONFIG_SYS_ODCR 0xff /* configures line driver impedances, */
- /* see 8240 book for bit definitions */
-#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */
- /* currently accessed page in memory */
- /* see 8240 book for details */
-
-/* SDRAM 0 - 256MB */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* stack in DCACHE @ 1GB (no backing mem) */
-#if defined(USE_DINK32)
-#define CONFIG_SYS_IBAT1L (0x40000000 | BATL_PP_00 )
-#define CONFIG_SYS_IBAT1U (0x40000000 | BATU_BL_128K )
-#else
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#endif
-
-/* PCI memory */
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* Flash, config addrs, etc */
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 20 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_FLASH_CHECKSUM
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/* values according to the manual */
-
-#define CONFIG_DRAM_50MHZ 1
-#define CONFIG_SDRAM_50MHZ
-
-#define CONFIG_DISK_SPINUP_TIME 1000000
-
-
-#endif /* __CONFIG_H */
* it linked after the configuration sector.
*/
# define LDS_BOARD_TEXT \
- arch/blackfin/cpu/traps.o (.text .text.*); \
- arch/blackfin/cpu/interrupt.o (.text .text.*); \
- arch/blackfin/cpu/serial.o (.text .text.*); \
- common/dlmalloc.o (.text .text.*); \
- lib/crc32.o (.text .text.*); \
+ arch/blackfin/lib/libblackfin.o (.text*); \
+ arch/blackfin/cpu/libblackfin.o (.text*); \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text .text.*);
+ common/env_embedded.o (.text*);
#endif
* it linked after the configuration sector.
*/
# define LDS_BOARD_TEXT \
- arch/blackfin/cpu/traps.o (.text .text.*); \
- arch/blackfin/cpu/interrupt.o (.text .text.*); \
- arch/blackfin/cpu/serial.o (.text .text.*); \
- common/dlmalloc.o (.text .text.*); \
- lib/crc32.o (.text .text.*); \
+ arch/blackfin/lib/libblackfin.o (.text*); \
+ arch/blackfin/cpu/libblackfin.o (.text*); \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text .text.*);
+ common/env_embedded.o (.text*);
#endif
* it linked after the configuration sector.
*/
# define LDS_BOARD_TEXT \
- arch/blackfin/cpu/traps.o (.text .text.*); \
- arch/blackfin/cpu/interrupt.o (.text .text.*); \
- arch/blackfin/cpu/serial.o (.text .text.*); \
- common/dlmalloc.o (.text .text.*); \
- lib/crc32.o (.text .text.*); \
+ arch/blackfin/lib/libblackfin.o (.text*); \
+ arch/blackfin/cpu/libblackfin.o (.text*); \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text .text.*);
+ common/env_embedded.o (.text*);
#endif
* it linked after the configuration sector.
*/
# define LDS_BOARD_TEXT \
- arch/blackfin/cpu/traps.o (.text .text.*); \
- arch/blackfin/cpu/interrupt.o (.text .text.*); \
- arch/blackfin/cpu/serial.o (.text .text.*); \
- common/dlmalloc.o (.text .text.*); \
- lib/crc32.o (.text .text.*); \
+ arch/blackfin/lib/libblackfin.o (.text*); \
+ arch/blackfin/cpu/libblackfin.o (.text*); \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text .text.*);
+ common/env_embedded.o (.text*);
#endif
* it linked after the configuration sector.
*/
# define LDS_BOARD_TEXT \
- arch/blackfin/cpu/traps.o (.text .text.*); \
- arch/blackfin/cpu/interrupt.o (.text .text.*); \
- arch/blackfin/cpu/serial.o (.text .text.*); \
- common/dlmalloc.o (.text .text.*); \
- lib/crc32.o (.text .text.*); \
+ arch/blackfin/lib/libblackfin.o (.text*); \
+ arch/blackfin/cpu/libblackfin.o (.text*); \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text .text.*);
+ common/env_embedded.o (.text*);
#endif
* it linked after the configuration sector.
*/
# define LDS_BOARD_TEXT \
- arch/blackfin/cpu/traps.o (.text .text.*); \
- arch/blackfin/cpu/interrupt.o (.text .text.*); \
- arch/blackfin/cpu/serial.o (.text .text.*); \
- common/dlmalloc.o (.text .text.*); \
- lib/crc32.o (.text .text.*); \
- lib/zlib.o (.text .text.*); \
- board/bf561-ezkit/bf561-ezkit.o (.text .text.*); \
+ arch/blackfin/lib/libblackfin.o (.text*); \
+ arch/blackfin/cpu/libblackfin.o (.text*); \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text .text.*);
+ common/env_embedded.o (.text*);
#endif
* it linked after the configuration sector.
*/
# define LDS_BOARD_TEXT \
- arch/blackfin/cpu/traps.o (.text .text.*); \
- arch/blackfin/cpu/interrupt.o (.text .text.*); \
- arch/blackfin/cpu/serial.o (.text .text.*); \
- common/dlmalloc.o (.text .text.*); \
- lib/crc32.o (.text .text.*); \
+ arch/blackfin/lib/libblackfin.o (.text*); \
+ arch/blackfin/cpu/libblackfin.o (.text*); \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text .text.*);
+ common/env_embedded.o (.text*);
#endif
* it linked after the configuration sector.
*/
# define LDS_BOARD_TEXT \
- arch/blackfin/cpu/traps.o (.text .text.*); \
- arch/blackfin/cpu/interrupt.o (.text .text.*); \
- arch/blackfin/cpu/serial.o (.text .text.*); \
- common/dlmalloc.o (.text .text.*); \
- lib/crc32.o (.text .text.*); \
+ arch/blackfin/lib/libblackfin.o (.text*); \
+ arch/blackfin/cpu/libblackfin.o (.text*); \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text .text.*);
+ common/env_embedded.o (.text*);
#endif
#include <config_cmd_default.h>
#undef CONFIG_CMD_NET /* disabeled - causes compile errors */
+#undef CONFIG_CMD_NFS
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_LOADB
#define CONFIG_CMD_KGDB
#undef CONFIG_CMD_NET
-
+#undef CONFIG_CMD_NFS
#ifdef DEBUG
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2010
* Murray Jensen <Murray.Jensen@cmst.csiro.au>
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_CMD_I2C
#undef CONFIG_CMD_NET
-
+#undef CONFIG_CMD_NFS
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
* Memory Info
*/
#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */
-#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
-#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */
+#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Start */
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 /* memtest start addr */
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) /* 16MB test */
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define CONFIG_SYS_ALE_MASK 0x8
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define NAND_MAX_CHIPS 1
-#define DEF_BOOTM ""
#endif
#ifdef CONFIG_USE_NOR
"mtdparts=davinci_nand.1:" PART_BOOT PART_PARAMS PART_KERNEL PART_REST
#endif
+#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
+
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
#endif /* __CONFIG_H */
#undef CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define NAND_MAX_CHIPS 1
-#define DEF_BOOTM ""
#endif
/*
*/
#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
#define CONFIG_CMDLINE_TAG
+#define CONFIG_REVISION_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTARGS \
"mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
#define MTDPARTS_DEFAULT \
"mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
+#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
#endif /* __CONFIG_H */
#define MTDPARTS_DEFAULT \
"mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
+#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
#endif /* __CONFIG_H */
#define MTDPARTS_DEFAULT \
"mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
+#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
#endif /* __CONFIG_H */
#define CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
-#define DEF_BOOTM ""
#elif defined(CONFIG_SYS_USE_NOR)
#ifdef CONFIG_NOR_UART_BOOT
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
#define CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
-#define DEF_BOOTM ""
#elif defined(CONFIG_SYS_USE_NOR)
#ifdef CONFIG_NOR_UART_BOOT
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
extern unsigned int boot_flash_type;
#endif
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
#endif /* __CONFIG_H */
--- /dev/null
+/*
+ * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
+ *
+ * Based on sheevaplug.h originally written by
+ * Prafulla Wadaskar <prafulla@marvell.com>
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _CONFIG_DOCKSTAR_H
+#define _CONFIG_DOCKSTAR_H
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING "\nSeagate FreeAgent DockStar"
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
+#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
+#define CONFIG_KW88F6281 1 /* SOC Name */
+#define CONFIG_MACH_DOCKSTAR /* Machine type */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */
+#define CONFIG_SYS_PROMPT "DockStar> " /* Command Prompt */
+
+/*
+ * Environment variables configurations
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
+#else
+#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
+#endif
+/*
+ * max 4k env size is enough, but in case of nand
+ * it has to be rounded to sector size
+ */
+#define CONFIG_ENV_SIZE 0x20000 /* 128k */
+#define CONFIG_ENV_ADDR 0x60000
+#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
+ "ubi part root; " \
+ "ubifsmount root; " \
+ "ubifsload 0x800000 ${kernel}; " \
+ "ubifsload 0x1100000 ${initrd}; " \
+ "bootm 0x800000 0x1100000"
+
+#define CONFIG_MTDPARTS "mtdparts=orion_nand:1m(uboot),-(root)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=console=ttyS0,115200\0" \
+ "mtdids=nand0=orion_nand\0" \
+ "mtdparts="CONFIG_MTDPARTS \
+ "kernel=/boot/uImage\0" \
+ "initrd=/boot/uInitrd\0" \
+ "bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0"
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR 0
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * File system
+ */
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_LZO
+
+#endif /* _CONFIG_DOCKSTAR_H */
* it linked after the configuration sector.
*/
# define LDS_BOARD_TEXT \
- arch/blackfin/cpu/traps.o (.text .text.*); \
- arch/blackfin/cpu/interrupt.o (.text .text.*); \
- arch/blackfin/cpu/serial.o (.text .text.*); \
- common/dlmalloc.o (.text .text.*); \
- lib/crc32.o (.text .text.*); \
- lib/zlib.o (.text .text.*); \
- board/ibf-dsp561/ibf-dsp561.o (.text .text.*); \
+ arch/blackfin/lib/libblackfin.o (.text*); \
+ arch/blackfin/cpu/libblackfin.o (.text*); \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text .text.*);
+ common/env_embedded.o (.text*);
#endif
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200}
+#define CONFIG_GENERIC_MMC 1
#define CONFIG_MMC 1
-#define CONFIG_OMAP3_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION 1
/* DDR */
#endif /* (CONFIG_CMD_NET) */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200}
+#define CONFIG_GENERIC_MMC 1
#define CONFIG_MMC 1
-#define CONFIG_OMAP3_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION 1
/* DDR */
#define CONFIG_MTD_DEVICE
#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#undef CONFIG_CMD_NFS /* nfs */
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
* CONFIG_SYS_KWD_CONFIG should be defined in board specific header file
*/
#ifndef CONFIG_SYS_KWD_CONFIG
-#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg
+#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg
#endif /* CONFIG_SYS_KWD_CONFIG */
-/*
+/*
* CONFIG_SYS_TEXT_BASE can be defined in board specific header file, if needed
*/
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_CMD_USB
#undef CONFIG_CMD_NET
-
+#undef CONFIG_CMD_NFS
/*
* Autobooting
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_DOS_PARTITION 1
-
/*
* Command line configuration.
*/
#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 for kernel */
-/*
+/*
* By default kwbimage.cfg from board specific folder is used
* If for some board, different configuration file need to be used,
* CONFIG_SYS_KWD_CONFIG should be defined in board specific header file
*/
#ifndef CONFIG_SYS_KWD_CONFIG
-#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg
+#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg
#endif /* CONFIG_SYS_KWD_CONFIG */
-/*
+/*
* CONFIG_SYS_TEXT_BASE can be defined in board specific header file, if needed
*/
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */
#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
#define CONFIG_NR_DRAM_BANKS 4
#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */
#define CONFIG_SYS_I2C_SLAVE 1
#define CONFIG_SYS_I2C_BUS 0
#define CONFIG_SYS_I2C_BUS_SELECT 1
+#define CONFIG_I2C_MULTI_BUS 1
#define CONFIG_DRIVER_OMAP34XX_I2C 1
/*
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */
- /* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base
#define CONFIG_ENV_OFFSET boot_flash_off
#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
-
-/* Flash banks JFFS2 should use */
-#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
- CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND
-/* use flash_info[2] */
-#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
#ifndef __ASSEMBLY__
extern unsigned int boot_flash_base;
extern volatile unsigned int boot_flash_env_addr;
extern unsigned int boot_flash_type;
#endif
-/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */
- /* on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base
#define CONFIG_ENV_OFFSET boot_flash_off
#define CONFIG_ENV_ADDR boot_flash_env_addr
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
-
-/* Flash banks JFFS2 should use */
-#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
- CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND
-/* use flash_info[2] */
-#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
#ifndef __ASSEMBLY__
extern unsigned int boot_flash_base;
extern volatile unsigned int boot_flash_env_addr;
extern unsigned int boot_flash_type;
#endif
+/*
+ * Support for relocation
+ */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+/*
+ * Define the board revision statically
+ */
+/* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */
+
/*----------------------------------------------------------------------------
* SMSC9115 Ethernet from SMSC9118 family
*----------------------------------------------------------------------------
#define CONFIG_SYS_I2C_SLAVE 1
#define CONFIG_SYS_I2C_BUS 0
#define CONFIG_SYS_I2C_BUS_SELECT 1
+#define CONFIG_I2C_MULTI_BUS 1
#define CONFIG_DRIVER_OMAP34XX_I2C 1
/*
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */
- /* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base
#define CONFIG_ENV_OFFSET boot_flash_off
#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
-
-/* Flash banks JFFS2 should use */
-#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
- CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND
-/* use flash_info[2] */
-#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
#ifndef __ASSEMBLY__
extern unsigned int boot_flash_base;
extern volatile unsigned int boot_flash_env_addr;
#endif /* (CONFIG_CMD_NET) */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
/*
- * (C) Copyright 2008
- * Grazvydas Ignotas <notasas@gmail.com>
+ * (C) Copyright 2008-2010
+ * Gražvydas Ignotas <notasas@gmail.com>
*
* Configuration settings for the OMAP3 Pandora.
*
* Size of malloc() pool
*/
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
- /* Sector */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
- /* initial data */
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE)
/*
* Hardware drivers
*/
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+#define CONFIG_SYS_DEVICE_NULLDEV 1
+
+/* USB */
+#define CONFIG_MUSB_UDC 1
+#define CONFIG_USB_OMAP3 1
+#define CONFIG_TWL4030_USB 1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE 1
+#define CONFIG_USB_TTY 1
+
/*
* NS16550 Configuration
*/
#define CONFIG_CMD_EXT2 /* EXT2 Support */
#define CONFIG_CMD_FAT /* FAT support */
-#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
#define CONFIG_CMD_I2C /* I2C serial bus support */
#define CONFIG_CMD_MMC /* MMC support */
#define CONFIG_CMD_NAND /* NAND support */
+#define CONFIG_CMD_CACHE /* Cache control */
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV "nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET 0x680000
-#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */
- /* partition */
+
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+
+#define MTDIDS_DEFAULT "nand0=nand"
+#define MTDPARTS_DEFAULT "mtdparts=nand:512k(xloader),"\
+ "1920k(uboot),128k(uboot-env),"\
+ "10m(boot),-(rootfs)"
+#else
+#define MTDPARTS_DEFAULT
+#endif
/* Environment information */
#define CONFIG_BOOTDELAY 1
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "usbtty=cdc_acm\0" \
"loadaddr=0x82000000\0" \
- "console=ttyS0,115200n8\0" \
- "videospec=omapfb:vram:2M,vram:4M\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "video=${videospec} " \
- "root=/dev/mmcblk0p2 rw " \
- "rootfstype=ext3 rootwait\0" \
- "nandargs=setenv bootargs console=${console} " \
- "video=${videospec} " \
- "root=/dev/mtdblock4 rw " \
- "rootfstype=jffs2\0" \
- "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source ${loadaddr}\0" \
- "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "bootm ${loadaddr}\0" \
- "nandboot=echo Booting from nand ...; " \
- "run nandargs; " \
- "nand read ${loadaddr} 280000 400000; " \
- "bootm ${loadaddr}\0" \
+ "bootargs=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
+ "rw rootflags=bulk_read console=ttyS0,115200n8 " \
+ "vram=6272K omapfb.vram=0:3000K\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc init; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loaduimage; then " \
- "run mmcboot; " \
- "else run nandboot; " \
- "fi; " \
- "fi; " \
- "else run nandboot; fi"
+ "if mmc init && fatload mmc1 0 ${loadaddr} autoboot.scr || " \
+ "ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \
+ "source ${loadaddr}; " \
+ "fi; " \
+ "ubi part boot && ubifsmount boot && ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
#define CONFIG_AUTO_COMPLETE 1
/*
/* SDRAM Bank Allocation method */
#define SDRC_R_B_C 1
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */
- /* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base
/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
#define CONFIG_ENV_IS_IN_NAND 1
-#define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */
-#define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */
+#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
#define CONFIG_ENV_OFFSET boot_flash_off
#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
-
-/* Flash banks JFFS2 should use */
-#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
- CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND
-/* use flash_info[2] */
-#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
#ifndef __ASSEMBLY__
extern unsigned int boot_flash_base;
extern volatile unsigned int boot_flash_env_addr;
#define PHYS_FLASH_SIZE (128 << 20)
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors on one chip */
-/* timeout values are in milliseconds */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
-
/* OMITTED: single 2 Gbit KFM2G16 OneNAND flash */
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */
#endif
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
/*
* SDRAM Memory Map
*/
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
-#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
/*
* NAND FLASH usage ... default nCS1:
* - four 128KB sectors for X-Loader
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
/* load address */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
/*
* OMAP3 has 12 GP timers, they can be driven by the system clock
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */
- /* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base
#define CONFIG_ENV_OFFSET boot_flash_off
#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
-
-/* Flash banks JFFS2 should use */
-#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
- CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND
-/* use flash_info[2] */
-#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
#ifndef __ASSEMBLY__
extern unsigned int boot_flash_base;
extern volatile unsigned int boot_flash_env_addr;
#define CONFIG_EXTRA_ENV_SETTINGS \
"usbtty=cdc_acm\0" \
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
/*
* Miscellaneous configurable options
*/
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
-#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */
- /* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#define CONFIG_SYS_FLASH_BASE boot_flash_base
#define CONFIG_ENV_OFFSET boot_flash_off
#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
-
#ifndef __ASSEMBLY__
extern unsigned int boot_flash_base;
extern volatile unsigned int boot_flash_env_addr;
/* Disabled commands */
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4030D800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
/* Disabled commands */
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
#undef CONFIG_CMD_IMLS /* List all found images */
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4030D800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
#include <config_cmd_default.h>
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#define CONFIG_CMD_ENV
#undef CONFIG_CMD_IMLS
#define CONFIG_CMD_MMC
#include <config_cmd_default.h>
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#define CONFIG_CMD_ENV
#define CONFIG_CMD_MMC
#define CONFIG_LCD
#include <config_cmd_default.h>
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#define CONFIG_BOOTDELAY 3
/*
- * (C) Copyright 2003-2005
+ * (C) Copyright 2003-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x00F40000 /* Offset of Environment Sector absolute address 0xfff40000*/
+#define CONFIG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector absolute address 0xfff40000*/
#define CONFIG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
#define CONFIG_RTL8169
*/
/* AX88796L Support(NE2000 base chip) */
-#define CONFIG_DRIVER_NE2000
#define CONFIG_DRIVER_AX88796L
#define CONFIG_DRIVER_NE2000_BASE 0xA4100000
#endif
#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
#endif /* __CONFIG_H */
#define CONFIG_SYS_EBC_CFG 0xb84ef000
-#define CONFIG_SDRAM_BANK0 /* use the standard SDRAM initialization */
+#undef CONFIG_SDRAM_BANK0 /* use private SDRAM initialization */
#undef CONFIG_SPD_EEPROM
/*
#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
/*
* Ethernet Contoller driver
*/
* it linked after the configuration sector.
*/
# define LDS_BOARD_TEXT \
- arch/blackfin/cpu/traps.o (.text .text.*); \
- arch/blackfin/cpu/interrupt.o (.text .text.*); \
- arch/blackfin/cpu/serial.o (.text .text.*); \
- common/dlmalloc.o (.text .text.*); \
- lib/crc32.o (.text .text.*); \
+ arch/blackfin/lib/libblackfin.o (.text*); \
+ arch/blackfin/cpu/libblackfin.o (.text*); \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text .text.*);
+ common/env_embedded.o (.text*);
#endif
#define CONFIG_JFFS2_NAND
#define NAND_MAX_CHIPS 1
#define CONFIG_ENV_OFFSET 0x180000
-#define DEF_BOOTM ""
/*
* davinci_nand is a bit of a misnomer since this particular EMIF block is
--- /dev/null
+/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ *
+ * Configuation settings for the TOP9000 CPU module with AT91SAM9XE.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * top9000 with at91sam9xe256 or at91sam9xe512
+ *
+ * Initial Bootloader is in embedded flash.
+ * Vital Product Data, U-Boot Environment are in I2C-EEPROM.
+ * U-Boot is in embedded flash, a backup U-Boot can be in NAND flash.
+ * kernel and file system are either in NAND flash or on a micro SD card.
+ * NAND flash is optional.
+ * I2C EEPROM is never optional.
+ * SPI FRAM is optional.
+ * SPI ENC28J60 is optional.
+ * 16 or 32 bit wide SDRAM.
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * Warning: changing CONFIG_SYS_TEXT_BASE requires
+ * adapting the initial boot program
+ */
+#define CONFIG_SYS_TEXT_BASE 0x21f00000 /* 31 MB into RAM */
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+#define CONFIG_CMD_ASKENV
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_PROMPT "TOP9000> "
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CACHE
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz xtal */
+#define CONFIG_SYS_HZ 1000
+
+/* SoC */
+#define CONFIG_ARM926EJS /* ARM926EJS Core */
+#define CONFIG_AT91FAMILY /* it's a member of AT91 */
+#define CONFIG_AT91SAM9260 /* Atmel AT91SAM9260 based SoC */
+#define CONFIG_AT91SAM9XE
+
+/* Misc CPU related */
+#define CONFIG_AT91_LEGACY
+#define CONFIG_ARCH_CPU_INIT
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_AT91RESET_EXTRST /* assert external reset */
+
+/* general purpose I/O */
+#define CONFIG_AT91_GPIO
+#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART3 /* USART 3 is DBGU !!! */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+/* SD/MMC card */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define CONFIG_SYS_MMC_CD_PIN AT91_PIN_PC9
+#define CONFIG_CMD_MMC
+
+/* Ethernet */
+#define CONFIG_MACB
+#define CONFIG_SYS_PHY_ID 1
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
+#define CONFIG_NET_RETRY_COUNT 20
+
+/* real time clock */
+#define CONFIG_RTC_AT91SAM9_RTT
+#define CONFIG_CMD_DATE
+
+#if defined(CONFIG_AT91SAM9XE)
+/*
+ * NOR flash - use embedded flash of SAM9XE256/512
+ * U-Boot will not fit into 128K !
+ * 2010.09 will not fit into 256K with all options enabled !
+ *
+ * Layout:
+ * 16kB 1st Bootloader
+ * Rest U-Boot
+ * the first sector (16kB) of EFLASH cannot be unprotected
+ * with u-boot commands
+ */
+# define CONFIG_AT91_EFLASH
+# define CONFIG_SYS_FLASH_BASE 0x200000
+# define CONFIG_SYS_MAX_FLASH_SECT 32
+# define CONFIG_SYS_MAX_FLASH_BANKS 1
+# define CONFIG_SYS_FLASH_PROTECTION
+# define CONFIG_EFLASH_PROTSECTORS 1 /* protect first sector */
+#endif
+
+/* SPI */
+#define CONFIG_ATMEL_SPI
+#define CONFIG_CMD_SPI
+
+/* RAMTRON FRAM */
+#define CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI0 /* SPI used for FRAM is SPI0 */
+#define FRAM_SPI_BUS 0
+#define FRAM_CS_NUM 0
+#define CONFIG_SPI_FLASH /* RAMTRON FRAM on SPI bus */
+#define CONFIG_SPI_FRAM_RAMTRON
+#define CONFIG_SF_DEFAULT_SPEED 1000000 /* be conservative here... */
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC "FM25H20"
+
+/* Microchip ENC28J60 (second LAN) */
+#if defined(CONFIG_EVAL9000)
+# define CONFIG_ENC28J60
+# define CONFIG_ATMEL_SPI1 /* SPI used for ENC28J60 is SPI1 */
+# define ENC_SPI_BUS 1
+# define ENC_CS_NUM 0
+# define ENC_SPI_CLOCK 1000000
+#endif /* CONFIG_EVAL9000 */
+
+/*
+ * SDRAM: 1 bank, min 32, max 128 MB
+ * Initialized before u-boot gets started.
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_SDRAM_SIZE 0x08000000
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END 0x21e00000
+#define CONFIG_SYS_LOAD_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 0x01000000)
+/*
+ * Initial stack pointer: 16k - GENERATED_GBL_DATA_SIZE in internal SRAM,
+ * leaving the correct space for initial global data structure above
+ * that address while providing maximum stack area below.
+ */
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (0x00300000 + 0x4000 - GENERATED_GBL_DATA_SIZE)
+
+/*
+ * NAND flash: 256 MB (optional)
+ *
+ * Layout:
+ * 640kB: u-boot (includes space for spare sectors, handled by
+ * initial loader)
+ * 2MB: kernel
+ * rest: file system
+ */
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_DBW_8
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
+#define CONFIG_CMD_NAND
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "top9000"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* I2C support must always be enabled */
+#define CONFIG_SOFT_I2C
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_SPEED 400000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_I2C_MULTI_BUS
+#define I2C0_PORT AT91_PIO_PORTA
+#define SDA0_PIN 23
+#define SCL0_PIN 24
+#define I2C1_PORT AT91_PIO_PORTB
+#define SDA1_PIN 12
+#define SCL1_PIN 13
+#define I2C_SOFT_DECLARATIONS void iic_init(void);\
+ int iic_read(void);\
+ void iic_sda(int);\
+ void iic_scl(int);
+#define I2C_ACTIVE
+#define I2C_TRISTATE
+#define I2C_INIT iic_init()
+#define I2C_READ iic_read()
+#define I2C_SDA(bit) iic_sda(bit)
+#define I2C_SCL(bit) iic_scl(bit)
+#define I2C_DELAY udelay(3)
+/* EEPROM configuration */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_SIZE 0x2000
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+/* later: #define CONFIG_I2C_ENV_EEPROM_BUS 0 */
+/* ENV is always in I2C-EEPROM */
+#define CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_OFFSET 0x1000
+#define CONFIG_ENV_SIZE 0x0f00
+/* VPD settings */
+#define CONFIG_SYS_I2C_FACT_ADDR 0x57
+#define CONFIG_SYS_FACT_OFFSET 0x1F00
+#define CONFIG_SYS_FACT_SIZE 0x0100
+/* later: #define CONFIG_MISC_INIT_R */
+/* define the next only if you want to allow users to enter VPD data */
+#define CONFIG_SYS_FACT_ENTRY
+#ifndef __ASSEMBLY__
+extern void read_factory_r(void);
+#endif
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_AUTOBOOT
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * add filesystem commands if we have at least 1 storage
+ * media with filesystem
+ */
+#if defined(CONFIG_NAND_ATMEL) \
+ || defined(CONFIG_USB_ATMEL) \
+ || defined(CONFIG_MMC)
+# define CONFIG_DOS_PARTITION
+# define CONFIG_CMD_FAT
+# define CONFIG_CMD_EXT2
+/* later: #define CONFIG_CMD_JFFS2 */
+#endif
+
+/* add NET commands if we have at least 1 LAN */
+#if defined(CONFIG_MACB) || defined(CONFIG_ENC28J60)
+# define CONFIG_CMD_PING
+# define CONFIG_CMD_DHCP
+# define CONFIG_CMD_MII
+/* is this really needed ? */
+# define CONFIG_RESET_PHY_R
+/* BOOTP options */
+# define CONFIG_BOOTP_BOOTFILESIZE
+# define CONFIG_BOOTP_BOOTPATH
+# define CONFIG_BOOTP_GATEWAY
+# define CONFIG_BOOTP_HOSTNAME
+#endif
+
+/* linux in NAND flash */
+#define CONFIG_BOOTCOUNT_LIMIT 1
+#define CONFIG_BOOTCOMMAND \
+ "nand read 0x21000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 " \
+ "root=/dev/mtdblock2 " \
+ "mtdparts=atmel_nand:" \
+ "640k(uboot)ro," \
+ "2M(linux)," \
+ "16M(root)," \
+ "-(rest) " \
+ "rw "\
+ "rootfstype=jffs2"
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN \
+ ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_STACKSIZE (32*1024)
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
+
#include <config_cmd_default.h>
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#define CONFIG_CMD_ENV
#undef CONFIG_CMD_IMLS
#define CONFIG_CMD_MMC
/* Generic MII registers. */
-#define MII_BMCR 0x00 /* Basic mode control register */
-#define MII_BMSR 0x01 /* Basic mode status register */
-#define MII_PHYSID1 0x02 /* PHYS ID 1 */
-#define MII_PHYSID2 0x03 /* PHYS ID 2 */
-#define MII_ADVERTISE 0x04 /* Advertisement control reg */
-#define MII_LPA 0x05 /* Link partner ability reg */
-#define MII_EXPANSION 0x06 /* Expansion register */
-#define MII_DCOUNTER 0x12 /* Disconnect counter */
-#define MII_FCSCOUNTER 0x13 /* False carrier counter */
-#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */
-#define MII_RERRCOUNTER 0x15 /* Receive error counter */
-#define MII_SREVISION 0x16 /* Silicon revision */
-#define MII_RESV1 0x17 /* Reserved... */
-#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */
-#define MII_PHYADDR 0x19 /* PHY address */
-#define MII_RESV2 0x1a /* Reserved... */
-#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */
-#define MII_NCONFIG 0x1c /* Network interface config */
+#define MII_BMCR 0x00 /* Basic mode control register */
+#define MII_BMSR 0x01 /* Basic mode status register */
+#define MII_PHYSID1 0x02 /* PHYS ID 1 */
+#define MII_PHYSID2 0x03 /* PHYS ID 2 */
+#define MII_ADVERTISE 0x04 /* Advertisement control reg */
+#define MII_LPA 0x05 /* Link partner ability reg */
+#define MII_EXPANSION 0x06 /* Expansion register */
+#define MII_CTRL1000 0x09 /* 1000BASE-T control */
+#define MII_STAT1000 0x0a /* 1000BASE-T status */
+#define MII_ESTATUS 0x0f /* Extended Status */
+#define MII_DCOUNTER 0x12 /* Disconnect counter */
+#define MII_FCSCOUNTER 0x13 /* False carrier counter */
+#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */
+#define MII_RERRCOUNTER 0x15 /* Receive error counter */
+#define MII_SREVISION 0x16 /* Silicon revision */
+#define MII_RESV1 0x17 /* Reserved... */
+#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */
+#define MII_PHYADDR 0x19 /* PHY address */
+#define MII_RESV2 0x1a /* Reserved... */
+#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */
+#define MII_NCONFIG 0x1c /* Network interface config */
/* Basic mode control register. */
-#define BMCR_RESV 0x003f /* Unused... */
-#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */
-#define BMCR_CTST 0x0080 /* Collision test */
-#define BMCR_FULLDPLX 0x0100 /* Full duplex */
-#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */
-#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */
-#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */
-#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */
-#define BMCR_SPEED100 0x2000 /* Select 100Mbps */
-#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */
-#define BMCR_RESET 0x8000 /* Reset the DP83840 */
+#define BMCR_RESV 0x003f /* Unused... */
+#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */
+#define BMCR_CTST 0x0080 /* Collision test */
+#define BMCR_FULLDPLX 0x0100 /* Full duplex */
+#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */
+#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */
+#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */
+#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */
+#define BMCR_SPEED100 0x2000 /* Select 100Mbps */
+#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */
+#define BMCR_RESET 0x8000 /* Reset the DP83840 */
/* Basic mode status register. */
-#define BMSR_ERCAP 0x0001 /* Ext-reg capability */
-#define BMSR_JCD 0x0002 /* Jabber detected */
-#define BMSR_LSTATUS 0x0004 /* Link status */
-#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */
-#define BMSR_RFAULT 0x0010 /* Remote fault detected */
-#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */
-#define BMSR_RESV 0x07c0 /* Unused... */
-#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
-#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
-#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
-#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */
-#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */
+#define BMSR_ERCAP 0x0001 /* Ext-reg capability */
+#define BMSR_JCD 0x0002 /* Jabber detected */
+#define BMSR_LSTATUS 0x0004 /* Link status */
+#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */
+#define BMSR_RFAULT 0x0010 /* Remote fault detected */
+#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */
+#define BMSR_RESV 0x00c0 /* Unused... */
+#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */
+#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */
+#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */
+#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
+#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
+#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
+#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */
+#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */
/* Advertisement control register. */
-#define ADVERTISE_SLCT 0x001f /* Selector bits */
-#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
-#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
-#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
-#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
-#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
-#define ADVERTISE_RESV 0x1c00 /* Unused... */
-#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
-#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
-#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
+#define ADVERTISE_SLCT 0x001f /* Selector bits */
+#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
+#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
+#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */
+#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
+#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */
+#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
+#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */
+#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
+#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */
+#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
+#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */
+#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */
+#define ADVERTISE_RESV 0x1000 /* Unused... */
+#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
+#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
+#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
ADVERTISE_CSMA)
#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
- ADVERTISE_100HALF | ADVERTISE_100FULL)
+ ADVERTISE_100HALF | ADVERTISE_100FULL)
/* Link partner ability register. */
-#define LPA_SLCT 0x001f /* Same as advertise selector */
-#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
-#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
-#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
-#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
-#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */
-#define LPA_RESV 0x1c00 /* Unused... */
-#define LPA_RFAULT 0x2000 /* Link partner faulted */
-#define LPA_LPACK 0x4000 /* Link partner acked us */
-#define LPA_NPAGE 0x8000 /* Next page bit */
+#define LPA_SLCT 0x001f /* Same as advertise selector */
+#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
+#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */
+#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
+#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */
+#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
+#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */
+#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
+#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/
+#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */
+#define LPA_PAUSE_CAP 0x0400 /* Can pause */
+#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */
+#define LPA_RESV 0x1000 /* Unused... */
+#define LPA_RFAULT 0x2000 /* Link partner faulted */
+#define LPA_LPACK 0x4000 /* Link partner acked us */
+#define LPA_NPAGE 0x8000 /* Next page bit */
#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL)
#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4)
/* Expansion register for auto-negotiation. */
-#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */
-#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */
-#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */
-#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */
-#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */
-#define EXPANSION_RESV 0xffe0 /* Unused... */
+#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */
+#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */
+#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */
+#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */
+#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */
+#define EXPANSION_RESV 0xffe0 /* Unused... */
+
+#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */
+#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */
/* N-way test register. */
-#define NWAYTEST_RESV1 0x00ff /* Unused... */
-#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */
-#define NWAYTEST_RESV2 0xfe00 /* Unused... */
+#define NWAYTEST_RESV1 0x00ff /* Unused... */
+#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */
+#define NWAYTEST_RESV2 0xfe00 /* Unused... */
+
+/* 1000BASE-T Control register */
+#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */
+#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */
+/* 1000BASE-T Status register */
+#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */
+#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */
+#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */
+#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */
+
+/* Flow control flags */
+#define FLOW_CTRL_TX 0x01
+#define FLOW_CTRL_RX 0x02
/**
* mii_nway_result
*
* The one exception to IEEE 802.3u is that 100baseT4 is placed
* between 100T-full and 100T-half. If your phy does not support
- * 100T4 this is fine. If your phy places 100T4 elsewhere in the
+ * 100T4 this is fine. If your phy places 100T4 elsewhere in the
* priority order, you will need to roll your own function.
*/
static inline unsigned int mii_nway_result (unsigned int negotiated)
return 0;
}
-
#endif /* __LINUX_MII_H__ */
#define PCI_DEVICE_ID_PLX_SPCOM200 0x1103
#define PCI_DEVICE_ID_PLX_DJINN_ITOO 0x1151
#define PCI_DEVICE_ID_PLX_R753 0x1152
+#define PCI_DEVICE_ID_PLX_9030 0x9030
#define PCI_DEVICE_ID_PLX_9050 0x9050
#define PCI_DEVICE_ID_PLX_9060 0x9060
#define PCI_DEVICE_ID_PLX_9060ES 0x906E
#elif defined (CONFIG_MPC85xx)
#include <asm/immap_85xx.h>
-#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + offsetof(ccsr_pic_t, tfrr))
+#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PIC_OFFSET + \
+ offsetof(ccsr_pic_t, tfrr))
#elif defined (CONFIG_MPC86xx)
#include <asm/immap_86xx.h>
-#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + offsetof(ccsr_pic_t, tfrr))
+#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_PIC_OFFSET + \
+ offsetof(ccsr_pic_t, tfrr))
#elif defined (CONFIG_4xx)
#define _POST_WORD_ADDR \
include $(TOPDIR)/config.mk
-LIB = $(obj)libgeneric.a
+LIB = $(obj)libgeneric.o
COBJS-$(CONFIG_ADDR_MAP) += addr_map.o
COBJS-$(CONFIG_BZIP2) += bzlib.o
OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)libfdt.a
+LIB = $(obj)libfdt.o
SOBJS =
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)liblzma.a
+LIB = $(obj)liblzma.o
SOBJS =
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
-LIB = $(obj)liblzo.a
+LIB = $(obj)liblzo.o
SOBJS =
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
{
.resetvec 0xf8004ffc :
{
- *(.resetvec)
+ KEEP(*(.resetvec))
} = 0xffff
.text :
{
.resetvec 0x00800FFC :
{
- *(.resetvec)
+ KEEP(*(.resetvec))
} = 0xffff
.text :
{
.resetvec 0xE3003FFC :
{
- *(.resetvec)
+ KEEP(*(.resetvec))
} = 0xffff
.text :
{
.resetvec 0x00800FFC :
{
- *(.resetvec)
+ KEEP(*(.resetvec))
} = 0xffff
.text :
/*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2010
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
{
.resetvec 0xE0013FFC :
{
- *(.resetvec)
+ KEEP(*(.resetvec))
} = 0xffff
.text :
#
NAND_SPL := y
-CONFIG_SYS_TEXT_BASE := 0xfff00000
PAD_TO := 0xfff04000
include $(TOPDIR)/config.mk
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds \
+ -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
.text : {
*(.text*)
. = ALIGN(16);
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
*(.data*)
*(.sdata*)
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
__got2_entries = (. - _GOT2_TABLE_) >> 2;
}
. = ALIGN(8);
__bss_start = .;
- .bss (NOLOAD) : { *(.*bss) }
+ .bss (NOLOAD) : {
+ *(.*bss)
+ }
_end = .;
}
ENTRY(_start)
#
NAND_SPL := y
-CONFIG_SYS_TEXT_BASE := 0xfff00000
PAD_TO := 0xfff04000
include $(TOPDIR)/config.mk
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds \
+ -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
.text : {
*(.text*)
. = ALIGN(16);
- *(.eh_frame)
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
*(.data*)
*(.sdata*)
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
__got2_entries = (. - _GOT2_TABLE_) >> 2;
}
. = ALIGN(8);
__bss_start = .;
- .bss (NOLOAD) : { *(.*bss) }
+ .bss (NOLOAD) : {
+ *(.*bss)
+ }
_end = .;
}
ENTRY(_start)
. = ALIGN(4);
.data : {
*(.data)
- __datarel_start = .;
- *(.data.rel)
- __datarelrolocal_start = .;
- *(.data.rel.ro.local)
- __datarellocal_start = .;
- *(.data.rel.local)
- __datarelro_start = .;
- *(.data.rel.ro)
}
. = ALIGN(4);
- __rel_dyn_start = .;
- __rel_dyn_end = .;
- __dynsym_start = .;
-
- __got_start = .;
- . = ALIGN(4);
- .got : { *(.got) }
-
- __got_end = .;
- . = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
- __bss_start = .;
- .bss : { *(.bss) }
- _end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ _end = .;
+ }
+
/DISCARD/ : { *(.bss*) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynsym*) }
#
NAND_SPL := y
-CONFIG_SYS_TEXT_BASE := 0xfff00000
include $(TOPDIR)/config.mk
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds \
+ -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
# CFLAGS += -DDEBUG
-LIB = $(obj)libnet.a
+LIB = $(obj)libnet.o
COBJS-$(CONFIG_CMD_NET) += bootp.o
COBJS-$(CONFIG_CMD_DNS) += dns.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
include $(TOPDIR)/config.mk
include $(OBJTREE)/include/autoconf.mk
-LIB = libpost.a
-GPLIB-$(CONFIG_HAS_POST) += libgenpost.a
+LIB = libpost.o
+GPLIB-$(CONFIG_HAS_POST) += libgenpost.o
COBJS-$(CONFIG_HAS_POST) += post.o
COBJS-$(CONFIG_POST_STD_LIST) += tests.o
-SPLIB-$(CONFIG_HAS_POST) = drivers/libpostdrivers.a
+SPLIB-$(CONFIG_HAS_POST) = drivers/libpostdrivers.o
SPLIB-$(CONFIG_HAS_POST) += $(shell if [ -d lib_$(ARCH) ]; then echo \
- "lib_$(ARCH)/libpost$(ARCH).a"; fi)
+ "lib_$(ARCH)/libpost$(ARCH).o"; fi)
SPLIB-$(CONFIG_HAS_POST) += $(shell if [ -d lib_$(ARCH)/fpu ]; then echo \
- "lib_$(ARCH)/fpu/libpost$(ARCH)fpu.a"; fi)
+ "lib_$(ARCH)/fpu/libpost$(ARCH)fpu.o"; fi)
SPLIB-$(CONFIG_HAS_POST) += $(shell if [ -d cpu/$(CPU) ]; then echo \
- "cpu/$(CPU)/libpost$(CPU).a"; fi)
+ "cpu/$(CPU)/libpost$(CPU).o"; fi)
SPLIB-$(CONFIG_HAS_POST) += $(shell if [ -d board/$(BOARD) ]; then echo \
- "board/$(BOARD)/libpost$(BOARD).a"; fi)
+ "board/$(BOARD)/libpost$(BOARD).o"; fi)
GPLIB := $(addprefix $(obj),$(GPLIB-y))
SPLIB := $(addprefix $(obj),$(SPLIB-y))
# generic POST library
$(GPLIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
# specific POST libraries
$(SPLIB): $(obj).depend postdeps
# the POST lib archive
$(LIB): $(GPLIB) $(SPLIB)
- (echo create $(LIB); for lib in $(GPLIB) $(SPLIB) ; \
- do echo addlib $$lib; done; echo save) \
- | $(AR) -M
+ $(call cmd_link_o_target, $^)
#########################################################################
#
include $(OBJTREE)/include/autoconf.mk
-LIB = libpostlwmon.a
+LIB = libpostlwmon.o
COBJS-$(CONFIG_HAS_POST) += sysmon.o
# MA 02111-1307 USA
include $(OBJTREE)/include/autoconf.mk
-LIB = libpostlwmon5.a
+LIB = libpostlwmon5.o
COBJS-$(CONFIG_HAS_POST) += sysmon.o watchdog.o dspic.o fpga.o dsp.o gdc.o
#
include $(OBJTREE)/include/autoconf.mk
-LIB = libpostnetta.a
+LIB = libpostnetta.o
COBJS-$(CONFIG_HAS_POST) += codec.o dsp.o
#
include $(OBJTREE)/include/autoconf.mk
-LIB = libpostpdm360ng.a
+LIB = libpostpdm360ng.o
COBJS-$(CONFIG_HAS_POST) += coproc_com.o
#
include $(OBJTREE)/include/autoconf.mk
-LIB = libpostmpc83xx.a
+LIB = libpostmpc83xx.o
AOBJS-$(CONFIG_HAS_POST) +=
COBJS-$(CONFIG_HAS_POST) += ecc.o
#
include $(OBJTREE)/include/autoconf.mk
-LIB = libpostmpc8xx.a
+LIB = libpostmpc8xx.o
AOBJS-$(CONFIG_HAS_POST) += cache_8xx.o
COBJS-$(CONFIG_HAS_POST) += cache.o ether.o spr.o uart.o usb.o watchdog.o
#
include $(OBJTREE)/include/autoconf.mk
-LIB = libpostppc4xx.a
+LIB = libpostppc4xx.o
AOBJS-$(CONFIG_HAS_POST) += cache_4xx.o
COBJS-$(CONFIG_HAS_POST) += cache.o
clear_and_enable_ecc();
out_be32(ecc_mem, ECC_PATTERN);
out_be32(ecc_mem + 1, ECC_PATTERN);
+ ppcDcbf((u32)ecc_mem);
/* Verify no ECC error reading back */
value = in_be32(ecc_mem);
/* Test for correctable error by creating a one-bit error */
out_be32(ecc_mem, ECC_PATTERN_CORR);
+ ppcDcbf((u32)ecc_mem);
clear_and_enable_ecc();
value = in_be32(ecc_mem);
disable_ecc();
/* Test for uncorrectable error by creating a two-bit error */
out_be32(ecc_mem, ECC_PATTERN_UNCORR);
+ ppcDcbf((u32)ecc_mem);
clear_and_enable_ecc();
value = in_be32(ecc_mem);
disable_ecc();
/* Remove error from SDRAM and enable ECC. */
out_be32(ecc_mem, ECC_PATTERN);
+ ppcDcbf((u32)ecc_mem);
clear_and_enable_ecc();
return ret;
#
include $(TOPDIR)/config.mk
-LIB = libpostdrivers.a
+LIB = libpostdrivers.o
COBJS-$(CONFIG_HAS_POST) += i2c.o memory.o rtc.o
unsigned int i;
#ifndef CONFIG_SYS_POST_I2C_ADDRS
/* Start at address 1, address 0 is the general call address */
- for (i = 1; i < 128; i++)
+ for (i = 1; i < 128; i++) {
if (i2c_ignore_device(i))
continue;
if (i2c_probe (i) == 0)
return 0;
+ }
/* No devices found */
return -1;
#
include $(TOPDIR)/config.mk
-LIB = libpost$(ARCH).a
+LIB = libpost$(ARCH).o
AOBJS-$(CONFIG_HAS_POST) += asm.o
COBJS-$(CONFIG_HAS_POST) += cpu.o cmp.o cmpi.o two.o twox.o three.o threex.o
#
include $(TOPDIR)/config.mk
-LIB = libpost$(ARCH)fpu.a
+LIB = libpost$(ARCH)fpu.o
COBJS-$(CONFIG_HAS_POST) += fpu.o 20001122-1.o 20010114-2.o 20010226-1.o 980619-1.o
COBJS-$(CONFIG_HAS_POST) += acc1.o compare-fp-1.o mul-subnormal-single-1.o
all: $(LIB)
$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# Compile for a hosted environment on the target
HOSTCPPFLAGS = -idirafter $(SRCTREE)/include \
- -idirafter $(OBJTREE)/include2 \
- -idirafter $(OBJTREE)/include \
- -DUSE_HOSTCC
+ -idirafter $(OBJTREE)/include2 \
+ -idirafter $(OBJTREE)/include \
+ -DUSE_HOSTCC
ifeq ($(MTD_VERSION),old)
HOSTCPPFLAGS += -DMTD_OLD
projects / karo-tx-uboot.git / commitdiff