return ret;
}
+/**
+ * search_left_edge() - Find left edge of DQ/DQS working phase
+ * @write: Perform read (Stage 2) or write (Stage 3) calibration
+ * @rank_bgn: Rank number
+ * @write_group: Write Group
+ * @read_group: Read Group
+ * @test_bgn: Rank number to begin the test
+ * @bit_chk: Resulting bit mask after the test
+ * @sticky_bit_chk: Resulting sticky bit mask after the test
+ * @left_edge: Left edge of the DQ/DQS phase
+ * @right_edge: Right edge of the DQ/DQS phase
+ * @use_read_test: Perform read test
+ *
+ * Find left edge of DQ/DQS working phase.
+ */
+static void search_left_edge(const int write, const int rank_bgn,
+ const u32 write_group, const u32 read_group, const u32 test_bgn,
+ u32 *bit_chk, u32 *sticky_bit_chk,
+ int *left_edge, int *right_edge, const u32 use_read_test)
+{
+ const u32 correct_mask = write ? param->write_correct_mask :
+ param->read_correct_mask;
+ const u32 delay_max = write ? IO_IO_OUT1_DELAY_MAX : IO_IO_IN_DELAY_MAX;
+ const u32 dqs_max = write ? IO_IO_OUT1_DELAY_MAX : IO_DQS_IN_DELAY_MAX;
+ const u32 per_dqs = write ? RW_MGR_MEM_DQ_PER_WRITE_DQS :
+ RW_MGR_MEM_DQ_PER_READ_DQS;
+ u32 stop;
+ int i, d;
+
+ for (d = 0; d <= dqs_max; d++) {
+ if (write)
+ scc_mgr_apply_group_dq_out1_delay(d);
+ else
+ scc_mgr_apply_group_dq_in_delay(test_bgn, d);
+
+ writel(0, &sdr_scc_mgr->update);
+
+ /*
+ * Stop searching when the read test doesn't pass AND when
+ * we've seen a passing read on every bit.
+ */
+ if (write) { /* WRITE-ONLY */
+ stop = !rw_mgr_mem_calibrate_write_test(rank_bgn,
+ write_group,
+ 0, PASS_ONE_BIT,
+ bit_chk, 0);
+ } else if (use_read_test) { /* READ-ONLY */
+ stop = !rw_mgr_mem_calibrate_read_test(rank_bgn,
+ read_group, NUM_READ_PB_TESTS, PASS_ONE_BIT,
+ bit_chk, 0, 0);
+ } else { /* READ-ONLY */
+ rw_mgr_mem_calibrate_write_test(rank_bgn,
+ write_group,
+ 0, PASS_ONE_BIT,
+ bit_chk, 0);
+ *bit_chk = *bit_chk >> (per_dqs *
+ (read_group - (write_group *
+ RW_MGR_MEM_IF_READ_DQS_WIDTH /
+ RW_MGR_MEM_IF_WRITE_DQS_WIDTH)));
+ stop = (*bit_chk == 0);
+ }
+ *sticky_bit_chk = *sticky_bit_chk | *bit_chk;
+ stop = stop && (*sticky_bit_chk == correct_mask);
+ debug_cond(DLEVEL == 2,
+ "%s:%d center(left): dtap=%u => %u == %u && %u", __func__, __LINE__, d,
+ *sticky_bit_chk, correct_mask, stop);
+
+ if (stop == 1)
+ break;
+
+ /* stop != 1 */
+ for (i = 0; i < per_dqs; i++) {
+ if (*bit_chk & 1) {
+ /*
+ * Remember a passing test as
+ * the left_edge.
+ */
+ left_edge[i] = d;
+ } else {
+ /*
+ * If a left edge has not been seen
+ * yet, then a future passing test
+ * will mark this edge as the right
+ * edge.
+ */
+ if (left_edge[i] == delay_max + 1)
+ right_edge[i] = -(d + 1);
+ }
+ *bit_chk = *bit_chk >> 1;
+ }
+ }
+
+ /* Reset DQ delay chains to 0 */
+ if (write)
+ scc_mgr_apply_group_dq_out1_delay(0);
+ else
+ scc_mgr_apply_group_dq_in_delay(test_bgn, 0);
+
+ *sticky_bit_chk = 0;
+ for (i = per_dqs - 1; i >= 0; i--) {
+ debug_cond(DLEVEL == 2,
+ "%s:%d vfifo_center: left_edge[%u]: %d right_edge[%u]: %d\n",
+ __func__, __LINE__, i, left_edge[i],
+ i, right_edge[i]);
+
+ /*
+ * Check for cases where we haven't found the left edge,
+ * which makes our assignment of the the right edge invalid.
+ * Reset it to the illegal value.
+ */
+ if ((left_edge[i] == delay_max + 1) &&
+ (right_edge[i] != delay_max + 1)) {
+ right_edge[i] = delay_max + 1;
+ debug_cond(DLEVEL == 2,
+ "%s:%d vfifo_center: reset right_edge[%u]: %d\n",
+ __func__, __LINE__, i, right_edge[i]);
+ }
+
+ /*
+ * Reset sticky bit
+ * READ: except for bits where we have seen both
+ * the left and right edge.
+ * WRITE: except for bits where we have seen the
+ * left edge.
+ */
+ *sticky_bit_chk <<= 1;
+ if (write) {
+ if (left_edge[i] != delay_max + 1)
+ *sticky_bit_chk |= 1;
+ } else {
+ if ((left_edge[i] != delay_max + 1) &&
+ (right_edge[i] != delay_max + 1))
+ *sticky_bit_chk |= 1;
+ }
+ }
+
+
+}
+
/**
* search_right_edge() - Find right edge of DQ/DQS working phase
* @write: Perform read (Stage 2) or write (Stage 3) calibration
uint32_t write_group, uint32_t read_group, uint32_t test_bgn,
uint32_t use_read_test, uint32_t update_fom)
{
- uint32_t i, p, d, min_index;
+ uint32_t i, p, min_index;
/*
* Store these as signed since there are comparisons with
* signed numbers.
int32_t new_dqs, start_dqs, start_dqs_en, shift_dq, final_dqs,
final_dqs_en;
int32_t dq_margin, dqs_margin;
- uint32_t stop;
uint32_t temp_dq_in_delay1, temp_dq_in_delay2;
uint32_t addr;
int ret;
}
/* Search for the left edge of the window for each bit */
- for (d = 0; d <= IO_IO_IN_DELAY_MAX; d++) {
- scc_mgr_apply_group_dq_in_delay(write_group, test_bgn, d);
-
- writel(0, &sdr_scc_mgr->update);
-
- /*
- * Stop searching when the read test doesn't pass AND when
- * we've seen a passing read on every bit.
- */
- if (use_read_test) {
- stop = !rw_mgr_mem_calibrate_read_test(rank_bgn,
- read_group, NUM_READ_PB_TESTS, PASS_ONE_BIT,
- &bit_chk, 0, 0);
- } else {
- rw_mgr_mem_calibrate_write_test(rank_bgn, write_group,
- 0, PASS_ONE_BIT,
- &bit_chk, 0);
- bit_chk = bit_chk >> (RW_MGR_MEM_DQ_PER_READ_DQS *
- (read_group - (write_group *
- RW_MGR_MEM_IF_READ_DQS_WIDTH /
- RW_MGR_MEM_IF_WRITE_DQS_WIDTH)));
- stop = (bit_chk == 0);
- }
- sticky_bit_chk = sticky_bit_chk | bit_chk;
- stop = stop && (sticky_bit_chk == param->read_correct_mask);
- debug_cond(DLEVEL == 2, "%s:%d vfifo_center(left): dtap=%u => %u == %u \
- && %u", __func__, __LINE__, d,
- sticky_bit_chk,
- param->read_correct_mask, stop);
-
- if (stop == 1) {
- break;
- } else {
- for (i = 0; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++) {
- if (bit_chk & 1) {
- /* Remember a passing test as the
- left_edge */
- left_edge[i] = d;
- } else {
- /* If a left edge has not been seen yet,
- then a future passing test will mark
- this edge as the right edge */
- if (left_edge[i] ==
- IO_IO_IN_DELAY_MAX + 1) {
- right_edge[i] = -(d + 1);
- }
- }
- bit_chk = bit_chk >> 1;
- }
- }
- }
-
- /* Reset DQ delay chains to 0 */
- scc_mgr_apply_group_dq_in_delay(test_bgn, 0);
- sticky_bit_chk = 0;
- for (i = RW_MGR_MEM_DQ_PER_READ_DQS - 1;; i--) {
- debug_cond(DLEVEL == 2, "%s:%d vfifo_center: left_edge[%u]: \
- %d right_edge[%u]: %d\n", __func__, __LINE__,
- i, left_edge[i], i, right_edge[i]);
-
- /*
- * Check for cases where we haven't found the left edge,
- * which makes our assignment of the the right edge invalid.
- * Reset it to the illegal value.
- */
- if ((left_edge[i] == IO_IO_IN_DELAY_MAX + 1) && (
- right_edge[i] != IO_IO_IN_DELAY_MAX + 1)) {
- right_edge[i] = IO_IO_IN_DELAY_MAX + 1;
- debug_cond(DLEVEL == 2, "%s:%d vfifo_center: reset \
- right_edge[%u]: %d\n", __func__, __LINE__,
- i, right_edge[i]);
- }
-
- /*
- * Reset sticky bit (except for bits where we have seen
- * both the left and right edge).
- */
- sticky_bit_chk = sticky_bit_chk << 1;
- if ((left_edge[i] != IO_IO_IN_DELAY_MAX + 1) &&
- (right_edge[i] != IO_IO_IN_DELAY_MAX + 1)) {
- sticky_bit_chk = sticky_bit_chk | 1;
- }
-
- if (i == 0)
- break;
- }
+ search_left_edge(0, rank_bgn, write_group, read_group, test_bgn,
+ &bit_chk, &sticky_bit_chk,
+ left_edge, right_edge, use_read_test);
/* Search for the right edge of the window for each bit */
ret = search_right_edge(0, rank_bgn, write_group, read_group,
int32_t mid_min, orig_mid_min;
int32_t new_dqs, start_dqs, shift_dq;
int32_t dq_margin, dqs_margin, dm_margin;
- uint32_t stop;
uint32_t temp_dq_out1_delay;
uint32_t addr;
}
/* Search for the left edge of the window for each bit */
- for (d = 0; d <= IO_IO_OUT1_DELAY_MAX; d++) {
- scc_mgr_apply_group_dq_out1_delay(write_group, d);
-
- writel(0, &sdr_scc_mgr->update);
-
- /*
- * Stop searching when the read test doesn't pass AND when
- * we've seen a passing read on every bit.
- */
- stop = !rw_mgr_mem_calibrate_write_test(rank_bgn, write_group,
- 0, PASS_ONE_BIT, &bit_chk, 0);
- sticky_bit_chk = sticky_bit_chk | bit_chk;
- stop = stop && (sticky_bit_chk == param->write_correct_mask);
- debug_cond(DLEVEL == 2, "write_center(left): dtap=%d => %u \
- == %u && %u [bit_chk= %u ]\n",
- d, sticky_bit_chk, param->write_correct_mask,
- stop, bit_chk);
-
- if (stop == 1) {
- break;
- } else {
- for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) {
- if (bit_chk & 1) {
- /*
- * Remember a passing test as the
- * left_edge.
- */
- left_edge[i] = d;
- } else {
- /*
- * If a left edge has not been seen
- * yet, then a future passing test will
- * mark this edge as the right edge.
- */
- if (left_edge[i] ==
- IO_IO_OUT1_DELAY_MAX + 1) {
- right_edge[i] = -(d + 1);
- }
- }
- debug_cond(DLEVEL == 2, "write_center[l,d=%d):", d);
- debug_cond(DLEVEL == 2, "bit_chk_test=%d left_edge[%u]: %d",
- (int)(bit_chk & 1), i, left_edge[i]);
- debug_cond(DLEVEL == 2, "right_edge[%u]: %d\n", i,
- right_edge[i]);
- bit_chk = bit_chk >> 1;
- }
- }
- }
-
- /* Reset DQ delay chains to 0 */
- scc_mgr_apply_group_dq_out1_delay(0);
- sticky_bit_chk = 0;
- for (i = RW_MGR_MEM_DQ_PER_WRITE_DQS - 1;; i--) {
- debug_cond(DLEVEL == 2, "%s:%d write_center: left_edge[%u]: \
- %d right_edge[%u]: %d\n", __func__, __LINE__,
- i, left_edge[i], i, right_edge[i]);
-
- /*
- * Check for cases where we haven't found the left edge,
- * which makes our assignment of the the right edge invalid.
- * Reset it to the illegal value.
- */
- if ((left_edge[i] == IO_IO_OUT1_DELAY_MAX + 1) &&
- (right_edge[i] != IO_IO_OUT1_DELAY_MAX + 1)) {
- right_edge[i] = IO_IO_OUT1_DELAY_MAX + 1;
- debug_cond(DLEVEL == 2, "%s:%d write_center: reset \
- right_edge[%u]: %d\n", __func__, __LINE__,
- i, right_edge[i]);
- }
-
- /*
- * Reset sticky bit (except for bits where we have
- * seen the left edge).
- */
- sticky_bit_chk = sticky_bit_chk << 1;
- if ((left_edge[i] != IO_IO_OUT1_DELAY_MAX + 1))
- sticky_bit_chk = sticky_bit_chk | 1;
-
- if (i == 0)
- break;
- }
+ search_left_edge(1, rank_bgn, write_group, 0, test_bgn,
+ &bit_chk, &sticky_bit_chk,
+ left_edge, right_edge, 0);
/* Search for the right edge of the window for each bit */
ret = search_right_edge(1, rank_bgn, write_group, 0,
projects / karo-tx-uboot.git / commitdiff