]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
apf27: add FPGA support for the apf27 board
authortrem <tremyfr@yahoo.fr>
Tue, 10 Sep 2013 20:08:40 +0000 (22:08 +0200)
committerStefano Babic <sbabic@denx.de>
Wed, 11 Sep 2013 07:35:43 +0000 (09:35 +0200)
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org>
Acked-by: Stefano Babic <sbabic@denx.de>
board/armadeus/apf27/Makefile
board/armadeus/apf27/apf27.c
board/armadeus/apf27/fpga.c [new file with mode: 0644]
board/armadeus/apf27/fpga.h [new file with mode: 0644]
include/configs/apf27.h

index ec0cb03f384bb636a7cf0d16333ba08199328f1e..5fcda6e9ccf3522e3f26484588df63c495d070cd 100644 (file)
@@ -13,6 +13,9 @@ LIB   = $(obj)lib$(BOARD).o
 
 COBJS  := apf27.o
 SOBJS  := lowlevel_init.o
+ifdef CONFIG_FPGA
+COBJS  += fpga.o
+endif
 
 SRCS   := $(COBJS:.o=.c) $(SOBJS:.o=.S)
 OBJS   := $(addprefix $(obj),$(COBJS))
index c0d9c41ac6d1f0900e168cce1d9b156ab9dc0505..30e720d167a6ce3398473cd8df7fa3867176586e 100644 (file)
@@ -19,6 +19,7 @@
 #include <asm/errno.h>
 #include "apf27.h"
 #include "crc.h"
+#include "fpga.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -174,6 +175,10 @@ int board_init(void)
        apf27_setup_port();
        apf27_iomux_init();
        apf27_devices_init();
+#if defined(CONFIG_FPGA)
+       APF27_init_fpga();
+#endif
+
 
        return 0;
 }
diff --git a/board/armadeus/apf27/fpga.c b/board/armadeus/apf27/fpga.c
new file mode 100644 (file)
index 0000000..0c08c06
--- /dev/null
@@ -0,0 +1,224 @@
+/*
+ * (C) Copyright 2002-2013
+ * Eric Jarrige <eric.jarrige@armadeus.org>
+ *
+ * based on the files by
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com
+ * and
+ * Keith Outwater, keith_outwater@mvis.com
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+#include <common.h>
+
+#include <asm/arch/imx-regs.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <command.h>
+#include <config.h>
+#include "fpga.h"
+#include <spartan3.h>
+#include "apf27.h"
+
+/*
+ * Note that these are pointers to code that is in Flash.  They will be
+ * relocated at runtime.
+ * Spartan2 code is used to download our Spartan 3 :) code is compatible.
+ * Just take care about the file size
+ */
+Xilinx_Spartan3_Slave_Parallel_fns fpga_fns = {
+       fpga_pre_fn,
+       fpga_pgm_fn,
+       fpga_init_fn,
+       NULL,
+       fpga_done_fn,
+       fpga_clk_fn,
+       fpga_cs_fn,
+       fpga_wr_fn,
+       fpga_rdata_fn,
+       fpga_wdata_fn,
+       fpga_busy_fn,
+       fpga_abort_fn,
+       fpga_post_fn,
+};
+
+Xilinx_desc fpga[CONFIG_FPGA_COUNT] = {
+       {Xilinx_Spartan3,
+        slave_parallel,
+        1196128l/8,
+        (void *)&fpga_fns,
+        0,
+        "3s200aft256"}
+};
+
+/*
+ * Initialize GPIO port B before download
+ */
+int fpga_pre_fn(int cookie)
+{
+       /* Initialize GPIO pins */
+       gpio_set_value(ACFG_FPGA_PWR, 1);
+       imx_gpio_mode(ACFG_FPGA_INIT | GPIO_IN | GPIO_PUEN | GPIO_GPIO);
+       imx_gpio_mode(ACFG_FPGA_DONE | GPIO_IN | GPIO_PUEN | GPIO_GPIO);
+       imx_gpio_mode(ACFG_FPGA_PRG | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
+       imx_gpio_mode(ACFG_FPGA_CLK | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
+       imx_gpio_mode(ACFG_FPGA_RW | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
+       imx_gpio_mode(ACFG_FPGA_CS | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
+       imx_gpio_mode(ACFG_FPGA_SUSPEND|GPIO_OUT|GPIO_PUEN|GPIO_GPIO);
+       gpio_set_value(ACFG_FPGA_RESET, 1);
+       imx_gpio_mode(ACFG_FPGA_RESET | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
+       imx_gpio_mode(ACFG_FPGA_PWR | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
+       gpio_set_value(ACFG_FPGA_PRG, 1);
+       gpio_set_value(ACFG_FPGA_CLK, 1);
+       gpio_set_value(ACFG_FPGA_RW, 1);
+       gpio_set_value(ACFG_FPGA_CS, 1);
+       gpio_set_value(ACFG_FPGA_SUSPEND, 0);
+       gpio_set_value(ACFG_FPGA_PWR, 0);
+       udelay(30000); /*wait until supply started*/
+
+       return cookie;
+}
+
+/*
+ * Set the FPGA's active-low program line to the specified level
+ */
+int fpga_pgm_fn(int assert, int flush, int cookie)
+{
+       debug("%s:%d: FPGA PROGRAM %s", __func__, __LINE__,
+             assert ? "high" : "low");
+       gpio_set_value(ACFG_FPGA_PRG, !assert);
+       return assert;
+}
+
+/*
+ * Set the FPGA's active-high clock line to the specified level
+ */
+int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+       debug("%s:%d: FPGA CLOCK %s", __func__, __LINE__,
+             assert_clk ? "high" : "low");
+       gpio_set_value(ACFG_FPGA_CLK, !assert_clk);
+       return assert_clk;
+}
+
+/*
+ * Test the state of the active-low FPGA INIT line.  Return 1 on INIT
+ * asserted (low).
+ */
+int fpga_init_fn(int cookie)
+{
+       int value;
+       debug("%s:%d: INIT check... ", __func__, __LINE__);
+       value = gpio_get_value(ACFG_FPGA_INIT);
+       /* printf("init value read %x",value); */
+#ifdef CONFIG_SYS_FPGA_IS_PROTO
+       return value;
+#else
+       return !value;
+#endif
+}
+
+/*
+ * Test the state of the active-high FPGA DONE pin
+ */
+int fpga_done_fn(int cookie)
+{
+       debug("%s:%d: DONE check... %s", __func__, __LINE__,
+             gpio_get_value(ACFG_FPGA_DONE) ? "high" : "low");
+       return gpio_get_value(ACFG_FPGA_DONE) ? FPGA_SUCCESS : FPGA_FAIL;
+}
+
+/*
+ * Set the FPGA's wr line to the specified level
+ */
+int fpga_wr_fn(int assert_write, int flush, int cookie)
+{
+       debug("%s:%d: FPGA RW... %s ", __func__, __LINE__,
+             assert_write ? "high" : "low");
+       gpio_set_value(ACFG_FPGA_RW, !assert_write);
+       return assert_write;
+}
+
+int fpga_cs_fn(int assert_cs, int flush, int cookie)
+{
+       debug("%s:%d: FPGA CS %s ", __func__, __LINE__,
+             assert_cs ? "high" : "low");
+       gpio_set_value(ACFG_FPGA_CS, !assert_cs);
+       return assert_cs;
+}
+
+int fpga_rdata_fn(unsigned char *data, int cookie)
+{
+       debug("%s:%d: FPGA READ DATA %02X ", __func__, __LINE__,
+             *((char *)ACFG_FPGA_RDATA));
+       *data = (unsigned char)
+               ((*((unsigned short *)ACFG_FPGA_RDATA))&0x00FF);
+       return *data;
+}
+
+int fpga_wdata_fn(unsigned char data, int flush, int cookie)
+{
+       debug("%s:%d: FPGA WRITE DATA %02X ", __func__, __LINE__,
+             data);
+       *((unsigned short *)ACFG_FPGA_WDATA) = data;
+       return data;
+}
+
+int fpga_abort_fn(int cookie)
+{
+       return fpga_post_fn(cookie);
+}
+
+
+int fpga_busy_fn(int cookie)
+{
+       return 1;
+}
+
+int fpga_post_fn(int cookie)
+{
+       debug("%s:%d: FPGA POST ", __func__, __LINE__);
+
+       imx_gpio_mode(ACFG_FPGA_RW | GPIO_PF | GPIO_PUEN);
+       imx_gpio_mode(ACFG_FPGA_CS | GPIO_PF | GPIO_PUEN);
+       imx_gpio_mode(ACFG_FPGA_CLK | GPIO_PF | GPIO_PUEN);
+       gpio_set_value(ACFG_FPGA_PRG, 1);
+       gpio_set_value(ACFG_FPGA_RESET, 0);
+       imx_gpio_mode(ACFG_FPGA_RESET | GPIO_OUT | GPIO_PUEN | GPIO_GPIO);
+       return cookie;
+}
+
+void apf27_fpga_setup(void)
+{
+       struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
+       struct system_control_regs *system =
+               (struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
+
+       /* Configure FPGA CLKO */
+       writel(ACFG_CCSR_VAL, &pll->ccsr);
+
+       /* Configure strentgh for FPGA */
+       writel(ACFG_DSCR10_VAL, &system->dscr10);
+       writel(ACFG_DSCR3_VAL, &system->dscr3);
+       writel(ACFG_DSCR7_VAL, &system->dscr7);
+       writel(ACFG_DSCR2_VAL, &system->dscr2);
+}
+
+/*
+ * Initialize the fpga.  Return 1 on success, 0 on failure.
+ */
+void APF27_init_fpga(void)
+{
+       int i;
+
+       apf27_fpga_setup();
+
+       fpga_init();
+
+       for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
+               debug("%s:%d: Adding fpga %d\n", __func__, __LINE__, i);
+               fpga_add(fpga_xilinx, &fpga[i]);
+       }
+
+       return;
+}
diff --git a/board/armadeus/apf27/fpga.h b/board/armadeus/apf27/fpga.h
new file mode 100644 (file)
index 0000000..84a5244
--- /dev/null
@@ -0,0 +1,25 @@
+/*
+ * (C) Copyright 2002-2013
+ * Eric Jarrige <eric.jarrige@armadeus.org>
+ *
+ * based on the files by
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com
+ * and
+ * Keith Outwater, keith_outwater@mvis.com
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+extern void APF27_init_fpga(void);
+
+extern int fpga_pre_fn(int cookie);
+extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
+extern int fpga_cs_fn(int assert_cs, int flush, int cookie);
+extern int fpga_init_fn(int cookie);
+extern int fpga_done_fn(int cookie);
+extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
+extern int fpga_wr_fn(int assert_write, int flush, int cookie);
+extern int fpga_rdata_fn(unsigned char *data, int cookie);
+extern int fpga_wdata_fn(unsigned char data, int flush, int cookie);
+extern int fpga_abort_fn(int cookie);
+extern int fpga_post_fn(int cookie);
+extern int fpga_busy_fn(int cookie);
index 6fd48181f1099edc676568f63d3b1c039b897e9a..e7e258fa60df1ed8c882969565c3a258bf84226d 100644 (file)
 #define CONFIG_FEC_MXC_PHYADDR         0x1f
 #define CONFIG_MII                             /* MII PHY management   */
 
+/*
+ * FPGA
+ */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_FPGA
+#endif
+#define CONFIG_FPGA_COUNT              1
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN3
+#define CONFIG_SYS_FPGA_WAIT           250 /* 250 ms */
+#define CONFIG_SYS_FPGA_PROG_FEEDBACK
+#define CONFIG_SYS_FPGA_CHECK_CTRLC
+#define CONFIG_SYS_FPGA_CHECK_ERROR
+
 /*
  * Fuses - IIM
  */