cpu_init_f (void)
{
/* MOUSSE board is initialized in asm */
-#if !defined(CONFIG_MOUSSE) && !defined(CONFIG_BMW)
+#if !defined(CONFIG_MOUSSE)
register unsigned long val;
CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/
/* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/
CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */
__asm__ __volatile__("eieio");
-#endif /* !CONFIG_MOUSSE && !CONFIG_BMW */
+#endif /* !CONFIG_MOUSSE */
}
in_flash:
-#if defined(CONFIG_BMW)
- bl early_init_f /* Must be ASM: no stack yet! */
-#endif
/*
* Setup BATs - cannot be done in C since we don't have a stack yet
*/
mfmsr r3
ori r3, r3, (MSR_IR | MSR_DR)
mtmsr r3
-#if !defined(CONFIG_BMW)
+
/* Enable and invalidate data cache.
*/
mfspr r3, HID0
ori r3, r3, 0x0080
sync
mtspr 1011, r3
-#endif /* !CONFIG_BMW */
+
/*
* Thisk the stack pointer *somewhere* sensible. Doesnt
* matter much where as we'll move it when we relocate
bdnz 3b
4:
-#if !defined(CONFIG_BMW)
/* Unlock the data cache and invalidate locked area */
xor r0, r0, r0
mtspr 1011, r0
dcbi r0, r4
addi r4, r4, 32
bdnz 41b
-#endif
/*
* Now flush the cache: note that we must start from a cache aligned
+++ /dev/null
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2002
-# James F. Dougherty, Broadcom Corporation, jfd@broadcom.com
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS = $(BOARD).o flash.o ns16550.o serial.o m48t59y.o
-
-SOBJS = early_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-Broadcom 95xx BMW CPCI Platform
-
-Overview
-=========
-BMW is an MPC8245 system controller featuring:
-* 3U CPCI Form Factor
-* BCM5703 Gigabit Ethernet
-* M48T59Y NVRAM
-* 16MB DOC
-* DIP Socket for Socketed DOC up to 1GB
-* 64MB SDRAM
-* LCD Display
-* Configurable Jumper options for 66,85, and 100Mhz memory bus
-
-
-BMW System Address Map
-======================
-BMW uses the MPC8245 CHRP Address MAP B found in the MPC8245 Users Manual
-(P.121, Section 3.1 Address Maps, Address Map B). Other I/O devices found
-onboard the processor module are listed briefly below:
-
-0x00000000 - 0x40000000 - 64MB SDRAM SIMM
- (Unregistered PC-100 SDRAM DIMM Module)
-
-0xFF000000 - 0xFF001FFF - M-Systems DiskOnChip (TM) 2000
- TSOP 16MB (MD2211-D16-V3)
-
-0x70000000 - 0x70001FFF - M-Systems DiskOnChip (TM) 2000
- DIP32 (Socketed 16MB - 1GB ) *
- NOTE: this is not populated on all systems.
-
-0x7c000000 - 0x7c000000 - Reset Register
- (Write 0 to reset)
-
-0x7c000001 - 0x7c000001 - System LED
- (Clear Bit 7 to turn on, set to shut off)
-
-0x7c000002 - 0x7c000002 - M48T59 Watchdog IRQ3
- (Clear bit 7 to reset, set to assert IRQ3)
-
-0x7c000003 - 0x7c000003 - M48T59 Write-Protect Register
- (Clear bit 7 to make R/W, set to make R/O)
-
-0x7c002000 - 0x7c002003 - Infineon OSRAM DLR2416 4 Character
- 5x7 Dot Matrix Alphanumeric Display
- (Each byte sets the appropriate character)
-
-0x7c004000 - 0x7c005FF0 - SGS-THOMSON M48T59Y 8K NVRAM/RTC
- NVRAM Memory Region
-
-0x7c005FF0 - 0x7c005FFF - SGS-THOMSON M48T59Y 8K NVRAM/RTC
- Realtime Clock Registers
-
-0xFFF00000 - 0xFFF80000 - 512K PLCC32 BootRom
- (AMD AM29F040, ST 29W040B)
-
-0xFFF00100 - System Reset Vector
-
-
-IO/MMU (BAT) Configuration
-======================
-The following Block-Address-Translation (BAT) configuration
-is recommended to access all I/O devices.
-
-#define CONFIG_SYS_IBAT0L (0x00000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (0x00000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-
-Interrupt Mappings
-======================
-BMW uses MPC8245 discrete mode interrupts. With the following
-hardwired mappings:
-
-BCM5701 10/100/1000 Ethernet IRQ1
-CompactPCI Interrupt A IRQ2
-RTC/Watchdog Interrupt IRQ3
-Internal NS16552 UART IRQ4
-
-
-Jumper Settings
-======================
-
-BMW has a jumper (JP600) for selecting 66, 85, or 100Mhz memory bus.
-A jumper (X) is a 0 bit.
-
-Hence 66= 10110
- 85= 11000
- 100= 10000
-
-Jumper Settings for various Speeds
-=======================
-J1 J2 J3 J4 J5
- X X 66Mhz
-=======================
-J1 J2 J3 J4 J5
- X X X 85Mhz
-=======================
-J1 J2 J3 J4 J5
- X X X X 100Mhz
-=======================
-
-Obviously, 100Mhz memory bus is recommended for optimum performance.
-
-
-U-Boot
-===============
-Broadcom BMW board is supported under config_BWM option.
-Supported features:
-
-- NVRAM setenv/getenv (used by Linux Kernel for configuration variables)
-- BCM570x TFTP file transfer support
-- LCD Display Support
-- DOC Support - (underway)
-
-
-U-Boot 1.2.0 (Aug 6 2002 - 17:44:48)
-
-CPU: MPC8245 Revision 16.20 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B)
-Built: Aug 6 2002 at 17:44:37
-Local Bus at 66 MHz
-DRAM: 64 MB
-FLASH: 4095 MB
-In: serial
-Out: serial
-Err: serial
-DOC: No DiskOnChip found
-Hit any key to stop autoboot: 0
-=>printenv
-bootdelay=5
-baudrate=9600
-clocks_in_mhz=1
-hostname=switch-2
-bootcmd=tftp 100000 vmlinux.img;bootm
-gateway=10.16.64.1
-ethaddr=00:00:10:18:10:10
-nfsroot=172.16.40.111:/boot/root-fs
-filesize=5ec8c
-netmask=255.255.240.0
-ipaddr=172.16.40.114
-serverip=172.16.40.111
-root=/dev/nfs
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 315/8172 bytes
-=>boot
-
-
-DevTools
-========
-ELDK
- DENX Embedded Linux Development Kit
-
-ROM Emulator
- Grammar Engine PROMICE P1160-90-AI21E (2MBx8bit, 90ns access time)
- Grammar Engine PL32E 32Pin PLCC Emulation cables
- Grammar Engine 3VA8CON (3Volt adapter with Short cables)
- Grammar Engine FPNET PromICE Ethernet Adapters
-
-ICE
- WRS/EST VisionICE-II (PPC8240)
-
-
-=>reset
-
-
-U-Boot 1.2.0 (Aug 6 2002 - 17:44:48)
-
-CPU: MPC8245 Revision 16.20 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B)
-Built: Aug 6 2002 at 17:44:37
-Local Bus at 66 MHz
-DRAM: 64 MB
-FLASH: 4095 MB
-In: serial
-Out: serial
-Err: serial
-DOC: No DiskOnChip found
-Hit any key to stop autoboot: 0
-
-Broadcom BCM5701 1000Base-T: bus 0, device 13, function 0: MBAR=0x80100000
-BCM570x PCI Memory base address @0x80100000
-eth0:Broadcom BCM5701 1000Base-T: 100 Mbps half duplex link up, flow control OFF
-eth0: Broadcom BCM5701 1000Base-T @0x80100000,node addr 000010181010
-eth0: BCM5700 with Broadcom BCM5701 Integrated Copper transceiver found
-eth0: 32-bit PCI 33MHz, MTU: 1500,Rx Checksum ON
-ARP broadcast 1
-TFTP from server 172.16.40.111; our IP address is 172.16.40.114
-Filename 'vmlinux.img'.
-Load address: 0x100000
-Loading: #################################################################
- ####################################T #############################
- ######################
-done
-Bytes transferred = 777199 (bdbef hex)
-
-eth0:Broadcom BCM5701 1000Base-T,HALT,POWER DOWN,done - offline.
-## Booting image at 00100000 ...
- Image Name: vmlinux.bin.gz
- Created: 2002-08-06 6:30:13 UTC
- Image Type: PowerPC Linux Kernel Image (gzip compressed)
- Data Size: 777135 Bytes = 758 kB = 0 MB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
-Memory BAT mapping: BAT2=64Mb, BAT3=0Mb, residual: 0Mb
-Linux version 2.4.19-rc3 (jfd@que) (gcc version 2.95.3 20010111 (prerelease/franzo/20010111)) #168 Mon Aug 5 23:29:20 PDT 2002
-CPU:82xx: 32 I-Cache Block Size, 32 D-Cache Block Size PVR: 0x810000
-U-Boot Environment: 0xc01b08f0
-IP PNP: 802.3 Ethernet Address=<0:0:10:18:10:10>
-cpu0: MPC8245/KAHLUA-II : BMW Platform : 64MB RAM: BPLD Rev. 6e
-NOTICE: mounting root file system via NFS
-IP PNP: switch-2: eth0 IP 172.16.40.114/255.255.240.0 gateway 10.16.64.1 server 172.16.40.111
-On node 0 totalpages: 16384
-zone(0): 16384 pages.
-zone(1): 0 pages.
-zone(2): 0 pages.
-Kernel command line: console=ttyS0,9600 ip=172.16.40.114:172.16.40.111:10.16.64.1:255.255.240.0:switch-2:eth0 root=/dev/nfs rw nfsroot=172.16.40.111:/boot/root-fs,timeo=200,retrans=500 nfsaddrs=172.16.40.114:172.16.40.111
-root_dev_setup:/dev/nfs or 00:ff
-time_init: decrementer frequency = 16.501145 MHz
-Calibrating delay loop... 175.71 BogoMIPS
-Memory: 62572k available (1396k kernel code, 436k data, 100k init, 0k highmem)
-Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
-Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
-Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
-Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
-Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
-POSIX conformance testing by UNIFIX
-PCI: Probing PCI hardware
-Linux NET4.0 for Linux 2.4
-Based upon Swansea University Computer Society NET3.039
-Initializing RT netlink socket
-Starting kswapd
-devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
-devfs: devfs_debug: 0x0
-devfs: boot_options: 0x1
-Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
-pty: 256 Unix98 ptys configured
-Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
-Testing ttyS0 (0xf7f51500, 0xf7f51500)...
-Testing ttyS1 (0xfc004600, 0xfc004600)...
-ttyS00 at 0xf7f51500 (irq = 24) is a ST16650
-ttyS01 at 0xfc004600 (irq = 25) is a 16550A
-Real Time Clock Driver v1.10e
-RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
-loop: loaded (max 8 devices)
-TFFS 5.1.1 Flash disk driver for DiskOnChip
-Copyright (C) 1998,2001 M-Systems Flash Disk Pioneers Ltd.
-DOC device(s) found: 1
-fl_init: registered device at major: 100
-fl_geninit: registered device at major: 100
-Partition check:
- fla: p1
-partition: /dev/fl/0: start_sect: 0,nr_sects: 32000 Fl_blk_size[]: 16000KB
-partition: /dev/fl/1: start_sect: 2,nr_sects: 31998 Fl_blk_size[]: 15999KB
-partition: /dev/fl/2: start_sect: 0,nr_sects: 0 Fl_blk_size[]: 0KB
-partition: /dev/fl/3: start_sect: 0,nr_sects: 0 Fl_blk_size[]: 0KB
-Broadcom Gigabit Ethernet Driver bcm5700 ver. 3.0.7 (07/17/02)
-eth0: Broadcom BCM5701 found at mem bfff0000, IRQ 1, node addr 000010181010
-eth0: Broadcom BCM5701 Integrated Copper transceiver found
-eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON
-bond0 registered without MII link monitoring, in bonding mode.
-rtc: unable to get misc minor
-NET4: Linux TCP/IP 1.0 for NET4.0
-IP Protocols: ICMP, UDP, TCP, IGMP
-IP: routing cache hash table of 512 buckets, 4Kbytes
-TCP: Hash tables configured (established 4096 bind 4096)
-bcm5700: eth0 NIC Link is UP, 100 Mbps half duplex
-IP-Config: Gateway not on directly connected network.
-NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
-802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
-All bugs added by David S. Miller <davem@redhat.com>
-Looking up port of RPC 100003/2 on 172.16.40.111
-Looking up port of RPC 100005/1 on 172.16.40.111
-VFS: Mounted root (nfs filesystem).
-Mounted devfs on /dev
-Freeing unused kernel memory: 100k init
-INIT: version 2.78 booting
-Mounting local filesystems...
-not mounted anything
-Setting up symlinks in /dev...done.
-Setting up extra devices in /dev...done.
-Starting devfsd...Started device management daemon for /dev
-INIT: Entering runlevel: 2
-Starting internet superserver: inetd.
-
-
-Welcome to Linux/PPC
-MPC8245/BMW
-
-
-switch-2 login: root
-Password:
-PAM_unix[49]: (login) session opened for user root by LOGIN(uid=0)
-Last login: Thu Nov 25 11:51:14 1920 on console
-
-
-Welcome to Linux/PPC
-MPC8245/BMW
-
-
-login[49]: ROOT LOGIN on `console'
-
-root@switch-2:~# cat /proc/cpuinfo
-cpu : 82xx
-revision : 16.20 (pvr 8081 1014)
-bogomips : 175.71
-vendor : Broadcom
-machine : BMW/MPC8245
-root@switch-2:~#
+++ /dev/null
-/*
- * (C) Copyright 2002
- * James F. Dougherty, Broadcom Corporation, jfd@broadcom.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <malloc.h>
-#include <stdio_dev.h>
-#include <net.h>
-#include <timestamp.h>
-#include <dtt.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <linux/mtd/doc2000.h>
-
-#include "bmw.h"
-#include "m48t59y.h"
-#include <pci.h>
-
-
-int checkboard(void)
-{
- ulong busfreq = get_bus_freq(0);
- char buf[32];
-
- puts ("Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B)\n");
- printf("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
- /* printf("MPLD: Revision %d\n", SYS_REVID_GET()); */
- printf("Local Bus at %s MHz\n", strmhz(buf, busfreq));
- return 0;
-}
-
-phys_size_t initdram(int board_type)
-{
- return 64*1024*1024;
-}
-
-
-void
-get_tod(void)
-{
- int year, month, day, hour, minute, second;
-
- m48_tod_get(&year,
- &month,
- &day,
- &hour,
- &minute,
- &second);
-
- printf(" Current date/time: %d/%d/%d %d:%d:%d \n",
- month, day, year, hour, minute, second);
-
-}
-
-/*
- * EPIC, PCI, and I/O devices.
- * Initialize Mousse Platform, probe for PCI devices,
- * Query configuration parameters if not set.
- */
-int misc_init_f (void)
-{
-#if 0
- m48_tod_init(); /* Init SGS M48T59Y TOD/NVRAM */
- printf("RTC: M48T589 TOD/NVRAM (%d) bytes\n",
- TOD_NVRAM_SIZE);
- get_tod();
-#endif
-
- sys_led_msg("BOOT");
- return 0;
-}
-
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-struct pci_controller hose;
-
-void pci_init_board (void)
-{
- pci_mpc824x_init(&hose);
- /* pci_dev_init(0); */
-}
-
-/*
- * Write characters to LCD display.
- * Note that the bytes for the first character is the last address.
- */
-void
-sys_led_msg(char* msg)
-{
- LED_REG(0) = msg[3];
- LED_REG(1) = msg[2];
- LED_REG(2) = msg[1];
- LED_REG(3) = msg[0];
-}
-
-#ifdef CONFIG_CMD_DOC
-/*
- * Map onboard TSOP-16MB DOC FLASH chip.
- */
-void doc_init (void)
-{
- doc_probe(DOC_BASE_ADDR);
-}
-#endif
-
-#define NV_ADDR ((volatile unsigned char *) CONFIG_ENV_ADDR)
-
-/* Read from NVRAM */
-void*
-nvram_read(void *dest, const long src, size_t count)
-{
- int i;
- volatile unsigned char* d = (unsigned char*)dest;
- volatile unsigned char* s = (unsigned char*)src;
-
- for( i = 0; i < count;i++)
- d[i] = s[i];
-
- return dest;
-}
-
-/* Write to NVRAM */
-void
-nvram_write(long dest, const void *src, size_t count)
-{
- int i;
- volatile unsigned char* d = (unsigned char*)dest;
- volatile unsigned char* s = (unsigned char*)src;
-
- SYS_TOD_UNPROTECT();
-
- for( i = 0; i < count;i++)
- d[i] = s[i];
-
- SYS_TOD_PROTECT();
-}
+++ /dev/null
-/*
- * BMW/MPC8245 Board definitions.
- * For more info, see http://www.vooha.com/
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * James Dougherty (jfd@broadcom.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __BMW_H
-#define __BMW_H
-
-/* System addresses */
-
-#define PCI_SPECIAL_BASE 0xfe000000
-#define PCI_SPECIAL_SIZE 0x01000000
-
-#define EUMBBAR_VAL 0x80500000 /* Location of EUMB region */
-#define EUMBSIZE 0x00100000 /* Size of EUMB region */
-
-/* Extended ROM space devices */
-#define DOC_BASE_ADDR 0xff000000 /* Onboard DOC TSOP 16MB */
-#define DOC2_BASE_ADDR 0x70000000 /* DIP32 socket -> 1GB */
-#define XROM_BASE_ADDR 0x7c000000 /* RCS2 (PAL / Satellite IO) */
-#define PLD_REG_BASE XROM_BASE_ADDR
-#define LED_REG_BASE (XROM_BASE_ADDR | 0x2000)
-#define TOD_BASE (XROM_BASE_ADDR | 0x4000)
-#define LED_REG(x) (*(volatile unsigned char *) \
- (LED_REG_BASE + (x)))
-#define XROM_DEV_SIZE 0x00006000
-
-#define ENET_DEV_BASE 0x80000000
-
-#define PLD_REG(off) (*(volatile unsigned char *)\
- (PLD_REG_BASE + (off)))
-
-#define PLD_REVID_B1 0x7f /* Fix me */
-#define PLD_REVID_B2 0x01 /* Fix me */
-
-#define SYS_HARD_RESET() { for (;;) PLD_REG(0) = 0; } /* clr 0x80 bit */
-#define SYS_REVID_GET() ((int) PLD_REG(0) & 0x7f)
-#define SYS_LED_OFF() (PLD_REG(1) |= 0x80)
-#define SYS_LED_ON() (PLD_REG(1) &= ~0x80)
-#define SYS_WATCHDOG_IRQ3() (PLD_REG(2) |= 0x80)
-#define SYS_WATCHDOG_RESET() (PLD_REG(2) &= ~0x80)
-#define SYS_TOD_PROTECT() (PLD_REG(3) |= 0x80)
-#define SYS_TOD_UNPROTECT() (PLD_REG(3) &= ~0x80)
-
-#define TOD_REG_BASE (TOD_BASE | 0x1ff0)
-#define TOD_NVRAM_BASE TOD_BASE
-#define TOD_NVRAM_SIZE 0x1ff0
-#define TOD_NVRAM_LIMIT (TOD_NVRAM_BASE + TOD_NVRAM_SIZE)
-#define RTC(r) (TOD_BASE + r)
-
-/* Onboard BCM570x device */
-#define PCI_ENET_IOADDR 0x80000000
-#define PCI_ENET_MEMADDR 0x80000000
-
-
-#ifndef __ASSEMBLY__
-/* C Function prototypes */
-void sys_led_msg(char* msg);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __BMW_H */
+++ /dev/null
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# BMW board
-#
-
-# NOTE: The flags below affect how the BCM570x driver is compiled
-PLATFORM_CPPFLAGS += -DEMBEDDED -DBIG_ENDIAN_HOST -DINCLUDE_5701_AX_FIX=1\
- -DDBG=0 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256
+++ /dev/null
-#include <ppc_asm.tmpl>
-#include <mpc824x.h>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#define USE_V2_INIT 1 /* Jimmy Blair's initialization. */
-
-
-/*
- * Initialize the MMU using BAT entries and hardwired TLB
- * This obviates the need for any code in cpu_init_f which
- * configures the BAT registers.
-*/
-#define MEMORY_MGMT_MSR_BITS (MSR_DR | MSR_IR) /* Data and Inst Relocate */
- .global iommu_setup
- /* Initialize IO/MMU mappings via BAT method Ch. 7,
- * PPC Programming Reference
- */
-iommu_setup:
-
-/* initialize the BAT registers (SPRs 528 - 543 */
-#define mtibat0u(x) mtspr 528,(x) /* SPR 528 (IBAT0U) */
-#define mtibat0l(x) mtspr 529,(x) /* SPR 529 (IBAT0L) */
-#define mtibat1u(x) mtspr 530,(x) /* SPR 530 (IBAT1U) */
-#define mtibat1l(x) mtspr 531,(x) /* SPR 531 (IBAT1L) */
-#define mtibat2u(x) mtspr 532,(x) /* SPR 532 (IBAT2U) */
-#define mtibat2l(x) mtspr 533,(x) /* SPR 533 (IBAT2L) */
-#define mtibat3u(x) mtspr 534,(x) /* SPR 534 (IBAT3U) */
-#define mtibat3l(x) mtspr 535,(x) /* SPR 535 (IBAT3L) */
-#define mtdbat0u(x) mtspr 536,(x) /* SPR 536 (DBAT0U) */
-#define mtdbat0l(x) mtspr 537,(x) /* SPR 537 (DBAT0L) */
-#define mtdbat1u(x) mtspr 538,(x) /* SPR 538 (DBAT1U) */
-#define mtdbat1l(x) mtspr 539,(x) /* SPR 539 (DBAT1L) */
-#define mtdbat2u(x) mtspr 540,(x) /* SPR 540 (DBAT2U) */
-#define mtdbat2l(x) mtspr 541,(x) /* SPR 541 (DBAT2L) */
-#define mtdbat3u(x) mtspr 542,(x) /* SPR 542 (DBAT3U) */
-#define mtdbat3l(x) mtspr 543,(x) /* SPR 543 (DBAT3L) */
-
-
-/* PowerPC processors do not necessarily initialize the BAT
- registers on power-up or reset. So they are in an unknown
- state. Before programming the BATs for the first time, all
- BAT registers MUST have their Vs and Vp bits cleared in the
- upper BAT half in order to avoid possibly having 2 BATs
- valid and mapping the same memory region.
-
- The reason for this is that, even with address translation
- disabled, multiple BAT hits for an address are treated as
- programming errors and can cause unpredictable results.
-
- It is up to the software to make sure it never has 2 IBAT
- mappings or 2 DBAT mappings that are valid for the same
- addresses. It is not necessary to perform this code
- sequence every time the BATs are programmed, only when
- there is a possibility that there may be overlapping BAT
- entries.
-
- When programming the BATs in non-reset scenarios, even if
- you are sure that your new mapping will not temporarily
- create overlapping regions, it is still a wise idea to
- invalidate a BAT entry by setting its upper BAT register to
- all 0's before programming it. This will avoid having a
- BAT marked valid that is in an unknown or transient state
-*/
-
- addis r5,0,0x0000
- mtibat0u(r5)
- mtibat0l(r5)
- mtibat1u(r5)
- mtibat1l(r5)
- mtibat2u(r5)
- mtibat2l(r5)
- mtibat3u(r5)
- mtibat3l(r5)
- mtdbat0u(r5)
- mtdbat0l(r5)
- mtdbat1u(r5)
- mtdbat1l(r5)
- mtdbat2u(r5)
- mtdbat2l(r5)
- mtdbat3u(r5)
- mtdbat3l(r5)
- isync
-
-/*
- * Set up I/D BAT0
- */
- lis r4, CONFIG_SYS_DBAT0L@h
- ori r4, r4, CONFIG_SYS_DBAT0L@l
- lis r3, CONFIG_SYS_DBAT0U@h
- ori r3, r3, CONFIG_SYS_DBAT0U@l
-
- mtdbat0l(r4)
- isync
- mtdbat0u(r3)
- isync
- sync
-
- lis r4, CONFIG_SYS_IBAT0L@h
- ori r4, r4, CONFIG_SYS_IBAT0L@l
- lis r3, CONFIG_SYS_IBAT0U@h
- ori r3, r3, CONFIG_SYS_IBAT0U@l
-
- isync
- mtibat0l(r4)
- isync
- mtibat0u(r3)
- isync
-
-/*
- * Set up I/D BAT1
- */
- lis r4, CONFIG_SYS_IBAT1L@h
- ori r4, r4, CONFIG_SYS_IBAT1L@l
- lis r3, CONFIG_SYS_IBAT1U@h
- ori r3, r3, CONFIG_SYS_IBAT1U@l
-
- isync
- mtibat1l(r4)
- isync
- mtibat1u(r3)
- isync
- mtdbat1l(r4)
- isync
- mtdbat1u(r3)
- isync
- sync
-
-/*
- * Set up I/D BAT2
- */
- lis r4, CONFIG_SYS_IBAT2L@h
- ori r4, r4, CONFIG_SYS_IBAT2L@l
- lis r3, CONFIG_SYS_IBAT2U@h
- ori r3, r3, CONFIG_SYS_IBAT2U@l
-
- isync
- mtibat2l(r4)
- isync
- mtibat2u(r3)
- isync
- mtdbat2l(r4)
- isync
- mtdbat2u(r3)
- isync
- sync
-
-/*
- * Setup I/D BAT3
- */
- lis r4, CONFIG_SYS_IBAT3L@h
- ori r4, r4, CONFIG_SYS_IBAT3L@l
- lis r3, CONFIG_SYS_IBAT3U@h
- ori r3, r3, CONFIG_SYS_IBAT3U@l
-
- isync
- mtibat3l(r4)
- isync
- mtibat3u(r3)
- isync
- mtdbat3l(r4)
- isync
- mtdbat3u(r3)
- isync
- sync
-
-
-/*
- * Invalidate all 64 TLB's
- */
- lis r3, 0
- mtctr r3
- lis r5, 4
-
-tlblp:
- tlbie r3
- sync
- addi r3, r3, 0x1000
- cmplw r3, r5
- blt tlblp
-
- sync
-
-/*
- * Enable Data Translation
- */
- lis r4, MEMORY_MGMT_MSR_BITS@h
- ori r4, r4, MEMORY_MGMT_MSR_BITS@l
- mfmsr r3
- or r3, r4, r3
- mtmsr r3
- isync
- sync
-
- blr
-
-
-#ifdef USE_V2_INIT
-/* #define USER_I_CACHE_ENABLE 1*/ /* Fast rom boots */
-/* Macro for hiadjust and lo */
-#define HIADJ(arg) arg@ha
-#define HI(arg) arg@h
-#define LO(arg) arg@l
-
-#undef LOADPTR
-#define LOADPTR(reg,const32) \
- addis reg,r0,HIADJ(const32); addi reg,reg,LO(const32)
-
-.globl early_init_f
-
-early_init_f:
-/* MPC8245/BMW CPCI System Init
- * Jimmy Blair, Broadcom Corp, 2002.
- */
- mflr r11
- /* Zero-out registers */
-
- addis r0,r0,0
- mtspr SPRG0,r0
- mtspr SPRG1,r0
- mtspr SPRG2,r0
- mtspr SPRG3,r0
-
- /* Set MPU/MSR to a known state. Turn on FP */
-
- LOADPTR (r3, MSR_FP)
- sync
- mtmsr r3
- isync
-
- /* Init the floating point control/status register */
-
- mtfsfi 7,0x0
- mtfsfi 6,0x0
- mtfsfi 5,0x0
- mtfsfi 4,0x0
- mtfsfi 3,0x0
- mtfsfi 2,0x0
- mtfsfi 1,0x0
- mtfsfi 0,0x0
- isync
-
- /* Set MPU/MSR to a known state. Turn off FP */
-
-#if 1 /* Turn off floating point (remove to keep FP on) */
- andi. r3, r3, 0
- sync
- mtmsr r3
- isync
-#endif
-
- /* Init the Segment registers */
-
- andi. r3, r3, 0
- isync
- mtsr 0,r3
- isync
- mtsr 1,r3
- isync
- mtsr 2,r3
- isync
- mtsr 3,r3
- isync
- mtsr 4,r3
- isync
- mtsr 5,r3
- isync
- mtsr 6,r3
- isync
- mtsr 7,r3
- isync
- mtsr 8,r3
- isync
- mtsr 9,r3
- isync
- mtsr 10,r3
- isync
- mtsr 11,r3
- isync
- mtsr 12,r3
- isync
- mtsr 13,r3
- isync
- mtsr 14,r3
- isync
- mtsr 15,r3
- isync
-
- /* Turn off data and instruction cache control bits */
-
- mfspr r3, HID0
- isync
- rlwinm r4, r3, 0, 18, 15 /* r4 has ICE and DCE bits cleared */
- sync
- isync
- mtspr HID0, r4 /* HID0 = r4 */
- isync
-
- /* Get cpu type */
-
- mfspr r28, PVR
- rlwinm r28, r28, 16, 16, 31
-
- /* invalidate the MPU's data/instruction caches */
-
- lis r3, 0x0
- cmpli 0, 0, r28, CPU_TYPE_603
- beq cpuIs603
- cmpli 0, 0, r28, CPU_TYPE_603E
- beq cpuIs603
- cmpli 0, 0, r28, CPU_TYPE_603P
- beq cpuIs603
- cmpli 0, 0, r28, CPU_TYPE_604R
- bne cpuNot604R
-
-cpuIs604R:
- lis r3, 0x0
- mtspr HID0, r3 /* disable the caches */
- isync
- ori r4, r4, 0x0002 /* disable BTAC by setting bit 30 */
-
-cpuNot604R:
- ori r3, r3, (HID0_ICFI |HID0_DCI)
-
-cpuIs603:
- ori r3, r3, (HID0_ICE | HID0_DCE)
- or r4, r4, r3 /* set bits */
- sync
- isync
- mtspr HID0, r4 /* HID0 = r4 */
- andc r4, r4, r3 /* clear bits */
- isync
- cmpli 0, 0, r28, CPU_TYPE_604
- beq cpuIs604
- cmpli 0, 0, r28, CPU_TYPE_604E
- beq cpuIs604
- cmpli 0, 0, r28, CPU_TYPE_604R
- beq cpuIs604
- mtspr HID0, r4
- isync
-
-#ifdef USER_I_CACHE_ENABLE
- b instCacheOn603
-#else
- b cacheEnableDone
-#endif
-
-cpuIs604:
- LOADPTR (r5, 0x1000) /* loop count, 0x1000 */
- mtspr CTR, r5
-loopDelay:
- nop
- bdnz loopDelay
- isync
- mtspr HID0, r4
- isync
-
- /* turn the Instruction cache ON for faster FLASH ROM boots */
-
-#ifdef USER_I_CACHE_ENABLE
-
- ori r4, r4, (HID0_ICE | HID0_ICFI)
- isync /* Synchronize for ICE enable */
- b writeReg4
-instCacheOn603:
- ori r4, r4, (HID0_ICE | HID0_ICFI)
- rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */
-
- /*
- * The setting of the instruction cache enable (ICE) bit must be
- * preceded by an isync instruction to prevent the cache from being
- * enabled or disabled while an instruction access is in progress.
- */
- isync
-writeReg4:
- mtspr HID0, r4 /* Enable Instr Cache & Inval cache */
- cmpli 0, 0, r28, CPU_TYPE_604
- beq cacheEnableDone
- cmpli 0, 0, r28, CPU_TYPE_604E
- beq cacheEnableDone
-
- mtspr HID0, r3 /* using 2 consec instructions */
- /* PPC603 recommendation */
-#endif
-cacheEnableDone:
-
- /* Detect map A or B */
-
- addis r5,r0, HI(CHRP_REG_ADDR)
- addis r6,r0, HI(CHRP_REG_DATA)
- LOADPTR (r7, KAHLUA_ID) /* Kahlua PCI controller ID */
- LOADPTR (r8, BMC_BASE)
-
- stwbrx r8,0,(r5)
- lwbrx r3,0,(r6) /* Store read value to r3 */
- cmp 0,0,r3,r7
- beq cr0, X4_KAHLUA_START
-
- /* It's not an 8240, is it an 8245? */
-
- LOADPTR (r7, KAHLUA2_ID) /* Kahlua PCI controller ID */
- cmp 0,0,r3,r7
- beq cr0, X4_KAHLUA_START
-
- /* Save the PCI controller type in r7 */
- mr r7, r3
-
- LOADPTR (r5, PREP_REG_ADDR)
- LOADPTR (r6, PREP_REG_DATA)
-
-X4_KAHLUA_START:
- /* MPC8245 changes begin here */
- LOADPTR (r3, MPC107_PCI_CMD) /* PCI command reg */
- stwbrx r3,0,r5
- li r4, 6 /* Command register value */
- sthbrx r4, 0, r6
-
- LOADPTR (r3, MPC107_PCI_STAT) /* PCI status reg */
- stwbrx r3,0,r5
- li r4, -1 /* Write-to-clear all bits */
- li r3, 2 /* PCI_STATUS is at +2 offset */
- sthbrx r4, r3, r6
-
- /*-------PROC_INT1_ADR */
-
- LOADPTR (r3, PROC_INT1_ADR) /* Processor I/F Config 1 reg. */
- stwbrx r3,0,r5
- LOADPTR (r4, 0xff141b98)
- stwbrx r4,0,r6
-
- /*-------PROC_INT2_ADR */
-
- LOADPTR (r3, PROC_INT2_ADR) /* Processor I/F Config 2 reg. */
- stwbrx r3,0,r5
- lis r4, 0x2000 /* Flush PCI config writes */
- stwbrx r4,0,r6
-
- LOADPTR (r9, KAHLUA2_ID)
- cmpl 0, 0, r7, r9
- bne L1not8245
-
- /* MIOCR1 -- turn on bit for DLL delay */
-
- LOADPTR (r3, MIOCR1_ADR_X)
- stwbrx r3,0,r5
- li r4, 0x04
- stb r4, MIOCR1_SHIFT(r6)
-
- /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
- /* SDRAM_CLK_DEL (0x77)*/
-
- LOADPTR (r3, MIOCR2_ADR_X)
- stwbrx r3,0,r5
- li r4, 0x10
- stb r4, MIOCR2_SHIFT(r6)
-
- /* PMCR2 -- set PCI hold delay to <10>b for 33 MHz */
-
- LOADPTR (r3, PMCR2_ADR_X)
- stwbrx r3,0,r5
- li r4, 0x20
- stb r4, PMCR2_SHIFT(r6)
-
- /* Initialize EUMBBAR early since 8245 has internal UART in EUMB */
-
- LOADPTR (r3, EUMBBAR)
- stwbrx r3,0,r5
- LOADPTR (r4, CONFIG_SYS_EUMB_ADDR)
- stwbrx r4,0,r6
-
-L1not8245:
-
- /* Toggle the DLL reset bit in AMBOR */
-
- LOADPTR (r3, AMBOR)
- stwbrx r3,0,r5
- lbz r4, 0(r6)
-
- andi. r4, r4, 0xdf
- stb r4, 0(r6) /* Clear DLL_RESET */
- sync
-
- ori r4, r4, 0x20 /* Set DLL_RESET */
- stb r4, 0(r6)
- sync
-
- andi. r4, r4, 0xdf
- stb r4, 0(r6) /* Clear DLL_RESET */
-
-
- /* Enable RCS2, use supplied timings */
- LOADPTR (r3, ERCR1)
- stwbrx r3,0,r5
- LOADPTR (r4, 0x80408000)
- stwbrx r4,0,r6
-
- /* Disable RCS3 parameters */
- LOADPTR (r3, ERCR2)
- stwbrx r3,0,r5
- LOADPTR (r4, 0x00000000)
- stwbrx r4,0,r6
-
- /* RCS3 at 0x70000000, 64KBytes */
- LOADPTR (r3, ERCR2)
- stwbrx r3,0,r5
- LOADPTR (r4, 0x00000004)
- stwbrx r4,0,r6
-
- /*-------MCCR1 */
-
-#ifdef INCLUDE_ECC
-#define MC_ECC 1
-#else /* INCLUDE_ECC */
-#define MC_ECC 0
-#endif /* INCLUDE_ECC */
-
-#define MC1_ROMNAL 8 /* 0-15 */
-#define MC1_ROMFAL 11 /* 0-31 */
-#define MC1_DBUS_SIZE 0 /* 0-3, read only */
-#define MC1_BURST 0 /* 0-1 */
-#define MC1_MEMGO 0 /* 0-1 */
-#define MC1_SREN 1 /* 0-1 */
-#define MC1_RAM_TYPE 0 /* 0-1 */
-#define MC1_PCKEN MC_ECC /* 0-1 */
-#define MC1_BANKBITS 0x5555 /* 2 bits/bank 7-0 */
-
- LOADPTR (r3, MEM_CONT1_ADR) /* Set MCCR1 (F0) */
- stwbrx r3,0,r5
- LOADPTR(r4, \
- MC1_ROMNAL << 28 | MC1_ROMFAL << 23 | \
- MC1_DBUS_SIZE << 21 | MC1_BURST << 20 | \
- MC1_MEMGO << 19 | MC1_SREN << 18 | \
- MC1_RAM_TYPE << 17 | MC1_PCKEN << 16 )
- li r3, MC1_BANKBITS
- cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
- bne BankBitsAdd
- cmpli 0, 0, r3, 0x5555
- beq K2BankBitsHack /* On 8245, 5555 ==> 0 */
-BankBitsAdd:
- ori r4, r3, 0
-K2BankBitsHack:
- stwbrx r4, 0, r6
-
- /*------- MCCR2 */
-
-#define MC2_TS_WAIT_TIMER 0 /* 0-7 */
-#define MC2_ASRISE 8 /* 0-15 */
-#define MC2_ASFALL 4 /* 0-15 */
-#define MC2_INLINE_PAR_NOT_ECC 0 /* 0-1 */
-#define MC2_WRITE_PARITY_CHK_EN MC_ECC /* 0-1 */
-#define MC2_INLRD_PARECC_CHK_EN MC_ECC /* 0-1 */
-#define MC2_ECC_EN 0 /* 0-1 */
-#define MC2_EDO 0 /* 0-1 */
-/*
-* N.B. This refresh interval looks good up to 85 MHz with Hynix SDRAM.
-* May need to be decreased for 100 MHz
-*/
-#define MC2_REFINT 0x3a5 /* 0-0x3fff */
-#define MC2_RSV_PG 0 /* 0-1 */
-#define MC2_RMW_PAR MC_ECC /* 0-1 */
-
- LOADPTR (r3, MEM_CONT2_ADR) /* Set MCCR2 (F4) */
- stwbrx r3,0,r5
- LOADPTR(r4, \
- MC2_TS_WAIT_TIMER << 29 | MC2_ASRISE << 25 | \
- MC2_ASFALL << 21 | MC2_INLINE_PAR_NOT_ECC << 20 | \
- MC2_WRITE_PARITY_CHK_EN << 19 | \
- MC2_INLRD_PARECC_CHK_EN << 18 | \
- MC2_ECC_EN << 17 | MC2_EDO << 16 | \
- MC2_REFINT << 2 | MC2_RSV_PG << 1 | MC2_RMW_PAR)
- cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
- bne notK2
- /* clear Kahlua2 reserved bits */
- LOADPTR (r3, 0xfffcffff)
- and r4, r4, r3
-notK2:
- stwbrx r4,0,r6
-
- /*------- MCCR3 */
-
-#define MC_BSTOPRE 0x079 /* 0-0x7ff */
-
-#define MC3_BSTOPRE_U (MC_BSTOPRE >> 4 & 0xf)
-#define MC3_REFREC 8 /* 0-15 */
-#define MC3_RDLAT (4+MC_ECC) /* 0-15 */
-#define MC3_CPX 0 /* 0-1 */
-#define MC3_RAS6P 0 /* 0-15 */
-#define MC3_CAS5 0 /* 0-7 */
-#define MC3_CP4 0 /* 0-7 */
-#define MC3_CAS3 0 /* 0-7 */
-#define MC3_RCD2 0 /* 0-7 */
-#define MC3_RP1 0 /* 0-7 */
-
- LOADPTR (r3, MEM_CONT3_ADR) /* Set MCCR3 (F8) */
- stwbrx r3,0,r5
- LOADPTR(r4, \
- MC3_BSTOPRE_U << 28 | MC3_REFREC << 24 | \
- MC3_RDLAT << 20 | MC3_CPX << 19 | \
- MC3_RAS6P << 15 | MC3_CAS5 << 12 | MC3_CP4 << 9 | \
- MC3_CAS3 << 6 | MC3_RCD2 << 3 | MC3_RP1)
- cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
- bne notK2b
- /* clear Kahlua2 reserved bits */
- LOADPTR (r3, 0xff000000)
- and r4, r4, r3
-notK2b:
- stwbrx r4,0,r6
-
- /*------- MCCR4 */
-
-#define MC4_PRETOACT 3 /* 0-15 */
-#define MC4_ACTOPRE 5 /* 0-15 */
-#define MC4_WMODE 0 /* 0-1 */
-#define MC4_INLINE MC_ECC /* 0-1 */
-#define MC4_REGISTERED (1-MC_ECC) /* 0-1 */
-#define MC4_BSTOPRE_UU (MC_BSTOPRE >> 8 & 3)
-#define MC4_REGDIMM 0 /* 0-1 */
-#define MC4_SDMODE_CAS 2 /* 0-7 */
-#define MC4_DBUS_RCS1 1 /* 0-1, 8-bit */
-#define MC4_SDMODE_WRAP 0 /* 0-1 */
-#define MC4_SDMODE_BURST 2 /* 0-7 */
-#define MC4_ACTORW 3 /* 0-15 */
-#define MC4_BSTOPRE_L (MC_BSTOPRE & 0xf)
-
- LOADPTR (r3, MEM_CONT4_ADR) /* Set MCCR4 (FC) */
- stwbrx r3,0,r5
- LOADPTR(r4, \
- MC4_PRETOACT << 28 | MC4_ACTOPRE << 24 | \
- MC4_WMODE << 23 | MC4_INLINE << 22 | \
- MC4_REGISTERED << 20 | MC4_BSTOPRE_UU << 18 | \
- MC4_DBUS_RCS1 << 17 | \
- MC4_REGDIMM << 15 | MC4_SDMODE_CAS << 12 | \
- MC4_SDMODE_WRAP << 11 | MC4_SDMODE_BURST << 8 | \
- MC4_ACTORW << 4 | MC4_BSTOPRE_L)
- cmpl 0, 0, r7, r9 /* Check for Kahlua 2 */
- bne notK2c
- /* Turn on Kahlua2 extended ROM space */
- LOADPTR (r3, 0x00200000)
- or r4, r4, r3
-notK2c:
- stwbrx r4,0,r6
-
-#ifdef INCLUDE_ECC
- /*------- MEM_ERREN1 */
-
- LOADPTR (r3, MEM_ERREN1_ADR) /* Set MEM_ERREN1 (c0) */
- stwbrx r3,0,r5
- lwbrx r4,0,r6
- ori r4,r4,4 /* Set MEM_PERR_EN */
- stwbrx r4,0,r6
-#endif /* INCLUDE_ECC */
-
- /*------- MSAR/MEAR */
-
- LOADPTR (r3, MEM_START1_ADR) /* Set MSAR1 (80) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0xc0804000)
- stwbrx r4,0,r6
-
- LOADPTR (r3, MEM_START2_ADR) /* Set MSAR2 (84) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0xc0804000)
- stwbrx r4,0,r6
-
- LOADPTR (r3, XMEM_START1_ADR) /* Set MESAR1 (88) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0x00000000)
- stwbrx r4,0,r6
-
- LOADPTR (r3, XMEM_START2_ADR) /* Set MESAR2 (8c) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0x01010101)
- stwbrx r4,0,r6
-
- LOADPTR (r3, MEM_END1_ADR) /* Set MEAR1 (90) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0xffbf7f3f)
- stwbrx r4,0,r6
-
- LOADPTR (r3, MEM_END2_ADR) /* Set MEAR2 (94) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0xffbf7f3f)
- stwbrx r4,0,r6
-
- LOADPTR (r3, XMEM_END1_ADR) /* MEEAR1 (98) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0x00000000)
- stwbrx r4,0,r6
-
- LOADPTR (r3, XMEM_END2_ADR) /* MEEAR2 (9c) */
- stwbrx r3,0,r5
- LOADPTR (r4, 0x01010101)
- stwbrx r4,0,r6
-
- /*-------ODCR */
-
- LOADPTR (r3, ODCR_ADR_X) /* Set ODCR */
- stwbrx r3,0,r5
-
- li r4, 0x7f
- stb r4, ODCR_SHIFT(r6) /* ODCR is at +3 offset */
-
- /*-------MBEN */
-
- LOADPTR (r3, MEM_EN_ADR) /* Set MBEN (a0) */
- stwbrx r3,0,r5
- li r4, 0x01 /* Enable bank 0 */
- stb r4, 0(r6) /* MBEN is at +0 offset */
-
-#if 0 /* Jimmy: I think page made is broken */
- /*-------PGMAX */
-
- LOADPTR (r3, MPM_ADR_X)
- stwbrx r3,0,r5
- li r4, 0x32
- stb r4, MPM_SHIFT(r6) /* PAGE_MODE is at +3 offset */
-#endif
-
- /* Wait before initializing other registers */
-
- lis r4,0x0001
- mtctr r4
-
-KahluaX4wait200us:
- bdnz KahluaX4wait200us
-
- /* Set MEMGO bit */
-
- LOADPTR (r3, MEM_CONT1_ADR) /* MCCR1 (F0) |= PGMAX */
- stwbrx r3,0,r5
- lwbrx r4,0,r6 /* old MCCR1 */
- oris r4,r4,0x0008 /* MEMGO=1 */
- stwbrx r4, 0, r6
-
- /* Wait again */
-
- addis r4,r0,0x0002
- ori r4,r4,0xffff
-
- mtctr r4
-
-KahluaX4wait8ref:
- bdnz KahluaX4wait8ref
-
- sync
- eieio
- mtlr r11
- blr
-
-#else /* USE_V2_INIT */
-
-
-/* U-Boot works, but memory will not run reliably for all address ranges.
- * Early U-Boot Working init, but 2.4.19 kernel will crash since memory is not
- * initialized correctly. Could work if debugged.
- */
-/* PCI Support routines */
-
- .globl __pci_config_read_32
-__pci_config_read_32:
- lis r4, 0xfec0
- stwbrx r3, r0, r4
- sync
- lis r4, 0xfee0
- lwbrx r3, 0, r4
- blr
- .globl __pci_config_read_16
-__pci_config_read_16:
- lis r4, 0xfec0
- andi. r5, r3, 2
- stwbrx r3, r0, r4
- sync
- oris r4, r5, 0xfee0
- lhbrx r3, r0, r4
- blr
- .globl __pci_config_read_8
-__pci_config_read_8:
- lis r4, 0xfec0
- andi. r5, r3, 3
- stwbrx r3, r0, r4
- sync
- oris r4, r5, 0xfee0
- lbz r3, 0(4)
- blr
- .globl __pci_config_write_32
-__pci_config_write_32:
- lis r5, 0xfec0
- stwbrx r3, r0, r5
- sync
- lis r5, 0xfee0
- stwbrx r4, r0, r5
- sync
- blr
- .globl __pci_config_write_16
-__pci_config_write_16:
- lis r5, 0xfec0
- andi. r6, r3, 2
- stwbrx r3, r0, 5
- sync
- oris r5, r6, 0xfee0
- sthbrx r4, r0, r5
- sync
- blr
- .globl __pci_config_write_8
-__pci_config_write_8:
- lis r5, 0xfec0
- andi. r6, r3, 3
- stwbrx r3, r0, r5
- sync
- oris r5, r6, 0xfee0
- stb r4, 0(r5)
- sync
- blr
- .globl in_8
-in_8:
- oris r3, r3, 0xfe00
- lbz r3,0(r3)
- blr
- .globl in_16
-in_16:
- oris r3, r3, 0xfe00
- lhbrx r3, 0, r3
- blr
- .globl in_16_ne
-in_16_ne:
- oris r3, r3, 0xfe00
- lhzx r3, 0, r3
- blr
- .globl in_32
-in_32:
- oris r3, r3, 0xfe00
- lwbrx r3, 0, r3
- blr
- .globl out_8
-out_8:
- oris r3, r3, 0xfe00
- stb r4, 0(r3)
- eieio
- blr
- .globl out_16
-out_16:
- oris r3, r3, 0xfe00
- sthbrx r4, 0, r3
- eieio
- blr
- .globl out_16_ne
-out_16_ne:
- oris r3, r3, 0xfe00
- sth r4, 0(r3)
- eieio
- blr
- .globl out_32
-out_32:
- oris r3, r3, 0xfe00
- stwbrx r4, 0, r3
- eieio
- blr
- .globl read_8
-read_8:
- lbz r3,0(r3)
- blr
- .globl read_16
-read_16:
- lhbrx r3, 0, r3
- blr
- .globl read_32
-read_32:
- lwbrx r3, 0, r3
- blr
- .globl read_32_ne
-read_32_ne:
- lwz r3, 0(r3)
- blr
- .globl write_8
-write_8:
- stb r4, 0(r3)
- eieio
- blr
- .globl write_16
-write_16:
- sthbrx r4, 0, r3
- eieio
- blr
- .globl write_32
-write_32:
- stwbrx r4, 0, r3
- eieio
- blr
- .globl write_32_ne
-write_32_ne:
- stw r4, 0(r3)
- eieio
- blr
-
-
-.globl early_init_f
-
-early_init_f:
- mflr r11
- lis r10, 0x8000
-
- /* PCI Latency Timer */
- li r4, 0x0d
- ori r3, r10, PLTR@l
- bl __pci_config_write_8
-
- /* Cache Line Size */
- li r4, 0x08
- ori r3, r10, PCLSR@l
- bl __pci_config_write_8
-
- /* PCI Cmd */
- li r4, 6
- ori r3, r10, PCICR@l
- bl __pci_config_write_16
-
-#if 1
- /* PCI Stat */
- ori r3, r10, PCISR@l
- bl __pci_config_read_16
- ori r4, r4, 0xffff
- ori r3, r10, PCISR@l
- bl __pci_config_write_16
-#endif
-
- /* PICR1 */
- lis r4, 0xff14
- ori r4, r4, 0x1b98
- ori r3, r10, PICR1@l
- bl __pci_config_write_32
-
-
- /* PICR2 */
- lis r4, 0x0404
- ori r4, r4, 0x0004
- ori r3, r10, PICR2@l
- bl __pci_config_write_32
-
- /* MIOCR1 */
- li r4, 0x04
- ori r3, r10, MIOCR1@l
- bl __pci_config_write_8
-
- /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
- /* SDRAM_CLK_DEL (0x77)*/
- li r4, 0x10
- ori r3, r10, MIOCR2@l
- bl __pci_config_write_8
-
- /* EUMBBAR */
- lis r4, 0xfc00
- ori r3, r10, EUMBBAR@l
- bl __pci_config_write_32
-
- /* AMBOR */
-
- /* Even if Address Map B is not being used (though it should),
- * the memory DLL needs to be cleared/set/cleared before using memory.
- */
-
- ori r3, r10, AMBOR@l
- bl __pci_config_read_8 /* get Current bits */
-
- andi. r4, r4, 0xffdf
- ori r3, r10, AMBOR@l
- bl __pci_config_write_16 /* Clear DLL_RESET */
-
- ori r4, r4, 0x0020
- ori r3, r10, AMBOR@l
- bl __pci_config_write_16 /* Set DLL_RESET */
-
- andi. r4, r4, 0xffdf
- ori r3, r10, AMBOR@l
- bl __pci_config_write_16 /* Clear DLL_RESET */
-
- /* ERCR1 */
- lis r4, 0x8040 /* Enable RCS2, use supplied timings */
- ori r4, r4, 0x8000
- ori r3, r10, ERCR1@l
- bl __pci_config_write_32
-
- /* ERCR2 */
- lis r4, 0x0000 /* Disable RCS3 parms */
- ori r4, r4, 0x0000
- ori r3, r10, ERCR2@l
- bl __pci_config_write_32
-
- /* ERCR3 */
- lis r4, 0x0000 /* RCS3 at 0x70000000, 64K bytes */
- ori r4, r4, 0x0004
- ori r3, r10, ERCR2@l
- bl __pci_config_write_32
-
- /* Preserve memgo bit */
- /* MCCR1 */
-
-/* lis r4, 0x75a8 / Safe Local ROM = 11+3 clocks */
- lis r4, 0x75a0 /* Safe Local ROM = 11+3 clocks */
-/* lis r4, 0x73a0 / Fast Local ROM = 7+3 clocks */
-/* oris r4, r4, 0x0010 / Burst ROM/Flash enable */
-/* oris r4, r4, 0x0004 / Self-refresh enable */
-
-/* ori r4,r4,0xFFFF / 16Mbit 2bank SDRAM */
-/* ori r4,r4,0xAAAA / 256Mbit 4bank SDRAM (8245 only) */
-/* ori r4,r4,0x5555 / 64Mbit 2bank SDRAM */
- ori r4,r4,0x0000 /* 64Mbit 4bank SDRAM */
-
- ori r3, r10, MCCR1@l
- bl __pci_config_write_32
-
- /* MCCR2 */
-
- lis r4,0x0000
-/* oris r4,r4,0x4000 / TS_WAIT_TIMER = 3 clocks */
- oris r4,r4,0x1000 /* ASRISE = 8 clocks */
- oris r4,r4,0x0080 /* ASFALL = 8 clocks */
-/* oris r4,r4,0x0010 / SDRAM Parity (else ECC) */
-/* oris r4,r4,0x0008 / Write parity check */
-/* oris r4,r4,0x0004 / SDRAM inline reads */
-
-
-/* Select a refresh rate; it needs to match the bus speed; if too */
-/* slow, data may be lost; if too fast, performance is lost. We */
-/* use the fastest value so we run at all speeds. */
-/* Refresh = (15600ns/busclk) - (213 (see UM)). */
-
-/* ori r4,r4,0x1d2c / 133 MHz mem bus = 1867 */
-/* ori r4,r4,0x150c / 100 MHz mem bus = 1347 */
-/* ori r4,r4,0x10fc / 83 MHz mem bus = 1087 */
-/* ori r4,r4,0x0cc4 / 66 MHz mem bus = 817 */
- ori r4,r4,0x04cc /* 33 MHz mem bus (SAFE) = 307 */
-/* ori r4,r4,0x0002 / Reserve a page */
-/* ori r4,r4,0x0001 / RWM parity */
-
- ori r3, r10, MCCR2@l
- bl __pci_config_write_32
-
-
- /* MCCR3 */
- lis r4,0x0000 /* BSTOPRE_M = 7 (see A/N) */
- oris r4,r4,0x0500 /* REFREC = 8 clocks */
- ori r3, r10, MCCR3@l
- bl __pci_config_write_32
-
- /* MCCR4 */ /* Turn on registered buffer mode */
- lis r4, 0x2000 /* PRETOACT = 3 clocks */
- oris r4,r4,0x0400 /* ACTOPRE = 5 clocks */
-/* oris r4,r4,0x0080 / Enable 8-beat burst (32-bit bus) */
-/* oris r4,r4,0x0040 / Enable Inline ECC/Parity */
- oris r4,r4,0x0020 /* EXTROM enabled */
- oris r4,r4,0x0010 /* Registered buffers */
-/* oris r4,r4,0x0000 / BSTOPRE_U = 0 (see A/N) */
- oris r4,r4,0x0002 /* DBUS_SIZ[2] (8 bit on RCS1) */
-
-/* ori r4,r4,0x8000 / Registered DIMMs */
- ori r4,r4,0x2000 /*CAS Latency (CL=3) (see RDLAT) */
-/* ori r4,r4,0x2000 / CAS Latency (CL=2) (see RDLAT) */
-/* ori r4,r4,0x0300 / Sequential wrap/8-beat burst */
- ori r4,r4,0x0200 /* Sequential wrap/4-beat burst */
- ori r4,r4,0x0030 /* ACTORW = 3 clocks */
- ori r4,r4,0x0009 /* BSTOPRE_L = 9 (see A/N) */
-
- ori r3, r10, MCCR4@l
- bl __pci_config_write_32
-
- /* MSAR1 */
- lis r4, 0xc0804000@h
- ori r4, r4, 0xc0804000@l
- ori r3, r10, MSAR1@l
- bl __pci_config_write_32
-
- /* MSAR2 */
- lis r4, 0xc0804000@h
- ori r4, r4, 0xc0804000@l
- ori r3, r10, MSAR2@l
- bl __pci_config_write_32
-
- /* MESAR1 */
- lis r4, 0x00000000@h
- ori r4, r4, 0x00000000@l
- ori r3, r10, EMSAR1@l
- bl __pci_config_write_32
-
- /* MESAR2 */
- lis r4, 0x01010101@h
- ori r4, r4, 0x01010101@l
- ori r3, r10, EMSAR2@l
- bl __pci_config_write_32
-
- /* MEAR1 */
- lis r4, 0xffbf7f3f@h
- ori r4, r4, 0xffbf7f3f@l
- ori r3, r10, MEAR1@l
- bl __pci_config_write_32
-
- /* MEAR2 */
- lis r4, 0xffbf7f3f@h
- ori r4, r4, 0xffbf7f3f@l
- ori r3, r10, MEAR2@l
- bl __pci_config_write_32
-
- /* MEEAR1 */
- lis r4, 0x00000000@h
- ori r4, r4, 0x00000000@l
- ori r3, r10, EMEAR1@l
- bl __pci_config_write_32
-
- /* MEEAR2 */
- lis r4, 0x01010101@h
- ori r4, r4, 0x01010101@l
- ori r3, r10, EMEAR2@l
- bl __pci_config_write_32
-
- /* ODCR */
- li r4, 0x7f
- ori r3, r10, ODCR@l
- bl __pci_config_write_8
-
- /* MBER */
- li r4, 0x01
- ori r3, r10, MBER@l
- bl __pci_config_write_8
-
- /* Page CTR aka PGMAX */
- li r4, 0x32
- ori r3, r10, 0x70
- bl __pci_config_write_8
-
-#if 0
- /* CLK Drive */
- ori r4, r10, 0xfc01 /* Top bit will be ignored */
- ori r3, r10, 0x74
- bl __pci_config_write_16
-#endif
-
- /* delay */
- lis r7, 1
- mtctr r7
-label1: bdnz label1
-
- /* Set memgo bit */
- /* MCCR1 */
- ori r3, r10, MCCR1@l
- bl __pci_config_read_32
- lis r7, 0x0008
- or r4, r3, r7
- ori r3, r10, MCCR1@l
- bl __pci_config_write_32
-
- /* delay again */
- lis r7, 1
- mtctr r7
-label2: bdnz label2
-#if 0
-/* DEBUG: Infinite loop, write then read */
-loop:
- lis r7, 0xffff
- mtctr r7
- li r3, 0x5004
- lis r4, 0xa0a0
- ori r4, r4, 0x5050
- bl write_32_ne
- li r3, 0x5004
- bl read_32_ne
- bdnz loop
-#endif
- mtlr r11
- blr
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <asm/pci_io.h>
-
-#define ROM_CS0_START 0xFF800000
-#define ROM_CS1_START 0xFF000000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data);
-
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t * info);
-#endif /* 0 */
-
-/*flash command address offsets*/
-
-#if 0
-#define ADDR0 (0x555)
-#define ADDR1 (0x2AA)
-#define ADDR3 (0x001)
-#else
-#define ADDR0 (0xAAA)
-#define ADDR1 (0x555)
-#define ADDR3 (0x001)
-#endif
-
-#define FLASH_WORD_SIZE unsigned char
-
-/*-----------------------------------------------------------------------
- */
-
-#if 0
-static int byte_parity_odd (unsigned char x) __attribute__ ((const));
-#endif /* 0 */
-static unsigned long flash_id (unsigned char mfct, unsigned char chip)
- __attribute__ ((const));
-
-typedef struct {
- FLASH_WORD_SIZE extval;
- unsigned short intval;
-} map_entry;
-
-#if 0
-static int byte_parity_odd (unsigned char x)
-{
- x ^= x >> 4;
- x ^= x >> 2;
- x ^= x >> 1;
- return (x & 0x1) != 0;
-}
-#endif /* 0 */
-
-
-static unsigned long flash_id (unsigned char mfct, unsigned char chip)
-{
- static const map_entry mfct_map[] = {
- {(FLASH_WORD_SIZE) AMD_MANUFACT,
- (unsigned short) ((unsigned long) FLASH_MAN_AMD >> 16)},
- {(FLASH_WORD_SIZE) FUJ_MANUFACT,
- (unsigned short) ((unsigned long) FLASH_MAN_FUJ >> 16)},
- {(FLASH_WORD_SIZE) STM_MANUFACT,
- (unsigned short) ((unsigned long) FLASH_MAN_STM >> 16)},
- {(FLASH_WORD_SIZE) MT_MANUFACT,
- (unsigned short) ((unsigned long) FLASH_MAN_MT >> 16)},
- {(FLASH_WORD_SIZE) INTEL_MANUFACT,
- (unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)},
- {(FLASH_WORD_SIZE) INTEL_ALT_MANU,
- (unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)}
- };
-
- static const map_entry chip_map[] = {
- {AMD_ID_F040B, FLASH_AM040},
- {(FLASH_WORD_SIZE) STM_ID_x800AB, FLASH_STM800AB}
- };
-
- const map_entry *p;
- unsigned long result = FLASH_UNKNOWN;
-
- /* find chip id */
- for (p = &chip_map[0];
- p < &chip_map[sizeof chip_map / sizeof chip_map[0]]; p++)
- if (p->extval == chip) {
- result = FLASH_VENDMASK | p->intval;
- break;
- }
-
- /* find vendor id */
- for (p = &mfct_map[0];
- p < &mfct_map[sizeof mfct_map / sizeof mfct_map[0]]; p++)
- if (p->extval == mfct) {
- result &= ~FLASH_VENDMASK;
- result |= (unsigned long) p->intval << 16;
- break;
- }
-
- return result;
-}
-
-
-unsigned long flash_init (void)
-{
- unsigned long i;
- unsigned char j;
- static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- flash_info_t *const pflinfo = &flash_info[i];
-
- pflinfo->flash_id = FLASH_UNKNOWN;
- pflinfo->size = 0;
- pflinfo->sector_count = 0;
- }
-
- for (i = 0; i < sizeof flash_banks / sizeof flash_banks[0]; i++) {
- flash_info_t *const pflinfo = &flash_info[i];
- const unsigned long base_address = flash_banks[i];
- volatile FLASH_WORD_SIZE *const flash =
- (FLASH_WORD_SIZE *) base_address;
-#if 0
- volatile FLASH_WORD_SIZE *addr2;
-#endif
-#if 0
- /* write autoselect sequence */
- flash[0x5555] = 0xaa;
- flash[0x2aaa] = 0x55;
- flash[0x5555] = 0x90;
-#else
- flash[0xAAA << (3 * i)] = 0xaa;
- flash[0x555 << (3 * i)] = 0x55;
- flash[0xAAA << (3 * i)] = 0x90;
-#endif
- __asm__ __volatile__ ("sync");
-
-#if 0
- pflinfo->flash_id = flash_id (flash[0x0], flash[0x1]);
-#else
- pflinfo->flash_id =
- flash_id (flash[0x0], flash[0x2 + 14 * i]);
-#endif
-
- switch (pflinfo->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040:
- pflinfo->size = 0x00080000;
- pflinfo->sector_count = 8;
- for (j = 0; j < 8; j++) {
- pflinfo->start[j] =
- base_address + 0x00010000 * j;
- pflinfo->protect[j] = flash[(j << 16) | 0x2];
- }
- break;
- case FLASH_STM800AB:
- pflinfo->size = 0x00100000;
- pflinfo->sector_count = 19;
- pflinfo->start[0] = base_address;
- pflinfo->start[1] = base_address + 0x4000;
- pflinfo->start[2] = base_address + 0x6000;
- pflinfo->start[3] = base_address + 0x8000;
- for (j = 1; j < 16; j++) {
- pflinfo->start[j + 3] =
- base_address + 0x00010000 * j;
- }
-#if 0
- /* check for protected sectors */
- for (j = 0; j < pflinfo->sector_count; j++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile FLASH_WORD_SIZE
- *) (pflinfo->start[j]);
- if (pflinfo->flash_id & FLASH_MAN_SST)
- pflinfo->protect[j] = 0;
- else
- pflinfo->protect[j] = addr2[2] & 1;
- }
-#endif
- break;
- }
- /* Protect monitor and environment sectors
- */
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[0]);
-#endif
-
- /* reset device to read mode */
- flash[0x0000] = 0xf0;
- __asm__ __volatile__ ("sync");
- }
-
- return flash_info[0].size + flash_info[1].size;
-}
-
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- int i;
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_MAN_SST) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-
-}
-#endif /* 0 */
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- static const char unk[] = "Unknown";
- const char *mfct = unk, *type = unk;
- unsigned int i;
-
- if (info->flash_id != FLASH_UNKNOWN) {
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- mfct = "AMD";
- break;
- case FLASH_MAN_FUJ:
- mfct = "FUJITSU";
- break;
- case FLASH_MAN_STM:
- mfct = "STM";
- break;
- case FLASH_MAN_SST:
- mfct = "SST";
- break;
- case FLASH_MAN_BM:
- mfct = "Bright Microelectonics";
- break;
- case FLASH_MAN_INTEL:
- mfct = "Intel";
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040:
- type = "AM29F040B (512K * 8, uniform sector size)";
- break;
- case FLASH_AM400B:
- type = "AM29LV400B (4 Mbit, bottom boot sect)";
- break;
- case FLASH_AM400T:
- type = "AM29LV400T (4 Mbit, top boot sector)";
- break;
- case FLASH_AM800B:
- type = "AM29LV800B (8 Mbit, bottom boot sect)";
- break;
- case FLASH_AM800T:
- type = "AM29LV800T (8 Mbit, top boot sector)";
- break;
- case FLASH_AM160T:
- type = "AM29LV160T (16 Mbit, top boot sector)";
- break;
- case FLASH_AM320B:
- type = "AM29LV320B (32 Mbit, bottom boot sect)";
- break;
- case FLASH_AM320T:
- type = "AM29LV320T (32 Mbit, top boot sector)";
- break;
- case FLASH_STM800AB:
- type = "M29W800AB (8 Mbit, bottom boot sect)";
- break;
- case FLASH_SST800A:
- type = "SST39LF/VF800 (8 Mbit, uniform sector size)";
- break;
- case FLASH_SST160A:
- type = "SST39LF/VF160 (16 Mbit, uniform sector size)";
- break;
- }
- }
-
- printf ("\n Brand: %s Type: %s\n"
- " Size: %lu KB in %d Sectors\n",
- mfct, type, info->size >> 10, info->sector_count);
-
- printf (" Sector Start Addresses:");
-
- for (i = 0; i < info->sector_count; i++) {
- unsigned long size;
- unsigned int erased;
- unsigned long *flash = (unsigned long *) info->start[i];
-
- /*
- * Check if whole sector is erased
- */
- size = (i != (info->sector_count - 1)) ?
- (info->start[i + 1] - info->start[i]) >> 2 :
- (info->start[0] + info->size - info->start[i]) >> 2;
-
- for (flash = (unsigned long *) info->start[i], erased = 1;
- (flash != (unsigned long *) info->start[i] + size)
- && erased; flash++)
- erased = *flash == ~0x0UL;
-
- printf ("%s %08lX %s %s",
- (i % 5) ? "" : "\n ",
- info->start[i],
- erased ? "E" : " ", info->protect[i] ? "RO" : " ");
- }
-
- puts ("\n");
- return;
-}
-
-#if 0
-
-/*
- * The following code cannot be run from FLASH!
- */
-ulong flash_get_size (vu_long * addr, flash_info_t * info)
-{
- short i;
- FLASH_WORD_SIZE value;
- ulong base = (ulong) addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
-
- printf ("flash_get_size: \n");
- /* Write auto select command: read Manufacturer ID */
- eieio ();
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0xAA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x55;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x90;
- value = addr2[0];
-
- switch (value) {
- case (FLASH_WORD_SIZE) AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FLASH_WORD_SIZE) FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (FLASH_WORD_SIZE) SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
- printf ("recognised manufacturer");
-
- value = addr2[ADDR3]; /* device ID */
- debug ("\ndev_code=%x\n", value);
-
- switch (value) {
- case (FLASH_WORD_SIZE) AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE) SST_ID_xF800A:
- info->flash_id += FLASH_SST800A;
- info->sector_count = 16;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE) SST_ID_xF160A:
- info->flash_id += FLASH_SST160A;
- info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- printf ("flash id %lx; sector count %x, size %lx\n", info->flash_id,
- info->sector_count, info->size);
- /* set up sector start address table */
- if (info->flash_id & FLASH_MAN_SST) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
- if (info->flash_id & FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr2 = (FLASH_WORD_SIZE *) info->start[0];
- *addr2 = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
- }
-
- return (info->size);
-}
-
-#endif
-
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
- unsigned char sh8b;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Check the ROM CS */
- if ((info->start[0] >= ROM_CS1_START)
- && (info->start[0] < ROM_CS0_START))
- sh8b = 3;
- else
- sh8b = 0;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info->
- start
- [sect]
- -
- info->
- start
- [0]) <<
- sh8b));
- if (info->flash_id & FLASH_MAN_SST) {
- addr[ADDR0 << sh8b] =
- (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1 << sh8b] =
- (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0 << sh8b] =
- (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0 << sh8b] =
- (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1 << sh8b] =
- (FLASH_WORD_SIZE) 0x00550055;
- addr[0] = (FLASH_WORD_SIZE) 0x00500050; /* block erase */
- udelay (30000); /* wait 30 ms */
- } else
- addr[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info->start[l_sect] -
- info->
- start[0]) << sh8b));
- while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
- (FLASH_WORD_SIZE) 0x00800080) {
- if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
- }
- }
-
- DONE:
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *) info->start[0];
- addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i = 0; i < 4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_word (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) info->start[0];
- volatile FLASH_WORD_SIZE *dest2;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
- ulong start;
- int flag;
- int i;
- unsigned char sh8b;
-
- /* Check the ROM CS */
- if ((info->start[0] >= ROM_CS1_START)
- && (info->start[0] < ROM_CS0_START))
- sh8b = 3;
- else
- sh8b = 0;
-
- dest2 = (FLASH_WORD_SIZE *) (((dest - info->start[0]) << sh8b) +
- info->start[0]);
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest2 & (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
- addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00A000A0;
-
- dest2[i << sh8b] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i << sh8b] & (FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
+++ /dev/null
-/*
- * SGS M48-T59Y TOD/NVRAM Driver
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp.
- *
- * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * SGS M48-T59Y TOD/NVRAM Driver
- *
- * The SGS M48 an 8K NVRAM starting at offset M48_BASE_ADDR and
- * continuing for 8176 bytes. After that starts the Time-Of-Day (TOD)
- * registers which are used to set/get the internal date/time functions.
- *
- * This module implements Y2K compliance by taking full year numbers
- * and translating back and forth from the TOD 2-digit year.
- *
- * NOTE: for proper interaction with an operating system, the TOD should
- * be used to store Universal Coordinated Time (GMT) and timezone
- * conversions should be used.
- *
- * Here is a diagram of the memory layout:
- *
- * +---------------------------------------------+ 0xffe0a000
- * | Non-volatile memory | .
- * | | .
- * | (8176 bytes of Non-volatile memory) | .
- * | | .
- * +---------------------------------------------+ 0xffe0bff0
- * | Flags |
- * +---------------------------------------------+ 0xffe0bff1
- * | Unused |
- * +---------------------------------------------+ 0xffe0bff2
- * | Alarm Seconds |
- * +---------------------------------------------+ 0xffe0bff3
- * | Alarm Minutes |
- * +---------------------------------------------+ 0xffe0bff4
- * | Alarm Date |
- * +---------------------------------------------+ 0xffe0bff5
- * | Interrupts |
- * +---------------------------------------------+ 0xffe0bff6
- * | WatchDog |
- * +---------------------------------------------+ 0xffe0bff7
- * | Calibration |
- * +---------------------------------------------+ 0xffe0bff8
- * | Seconds |
- * +---------------------------------------------+ 0xffe0bff9
- * | Minutes |
- * +---------------------------------------------+ 0xffe0bffa
- * | Hours |
- * +---------------------------------------------+ 0xffe0bffb
- * | Day |
- * +---------------------------------------------+ 0xffe0bffc
- * | Date |
- * +---------------------------------------------+ 0xffe0bffd
- * | Month |
- * +---------------------------------------------+ 0xffe0bffe
- * | Year (2 digits only) |
- * +---------------------------------------------+ 0xffe0bfff
- */
-#include <common.h>
-#include <rtc.h>
-#include "bmw.h"
-
-/*
- * Imported from mousse.h:
- *
- * TOD_REG_BASE Base of m48t59y TOD registers
- * SYS_TOD_UNPROTECT() Disable NVRAM write protect
- * SYS_TOD_PROTECT() Re-enable NVRAM write protect
- */
-
-#define YEAR 0xf
-#define MONTH 0xe
-#define DAY 0xd
-#define DAY_OF_WEEK 0xc
-#define HOUR 0xb
-#define MINUTE 0xa
-#define SECOND 0x9
-#define CONTROL 0x8
-#define WATCH 0x7
-#define INTCTL 0x6
-#define WD_DATE 0x5
-#define WD_HOUR 0x4
-#define WD_MIN 0x3
-#define WD_SEC 0x2
-#define _UNUSED 0x1
-#define FLAGS 0x0
-
-#define M48_ADDR ((volatile unsigned char *) TOD_REG_BASE)
-
-int m48_tod_init(void)
-{
- SYS_TOD_UNPROTECT();
-
- M48_ADDR[CONTROL] = 0;
- M48_ADDR[WATCH] = 0;
- M48_ADDR[INTCTL] = 0;
-
- /*
- * If the oscillator is currently stopped (as on a new part shipped
- * from the factory), start it running.
- *
- * Here is an example of the TOD bytes on a brand new M48T59Y part:
- * 00 00 00 00 00 00 00 00 00 88 8c c3 bf c8 f5 01
- */
-
- if (M48_ADDR[SECOND] & 0x80)
- M48_ADDR[SECOND] = 0;
-
- /* Is battery low */
- if ( M48_ADDR[FLAGS] & 0x10) {
- printf("NOTICE: Battery low on Real-Time Clock (replace SNAPHAT).\n");
- }
-
- SYS_TOD_PROTECT();
-
- return 0;
-}
-
-/*
- * m48_tod_set
- */
-
-static int to_bcd(int value)
-{
- return value / 10 * 16 + value % 10;
-}
-
-static int from_bcd(int value)
-{
- return value / 16 * 10 + value % 16;
-}
-
-static int day_of_week(int y, int m, int d) /* 0-6 ==> Sun-Sat */
-{
- static int t[] = {0, 3, 2, 5, 0, 3, 5, 1, 4, 6, 2, 4};
- y -= m < 3;
- return (y + y/4 - y/100 + y/400 + t[m-1] + d) % 7;
-}
-
-/*
- * Note: the TOD should store the current GMT
- */
-
-int m48_tod_set(int year, /* 1980-2079 */
- int month, /* 01-12 */
- int day, /* 01-31 */
- int hour, /* 00-23 */
- int minute, /* 00-59 */
- int second) /* 00-59 */
-
-{
- SYS_TOD_UNPROTECT();
-
- M48_ADDR[CONTROL] |= 0x80; /* Set WRITE bit */
-
- M48_ADDR[YEAR] = to_bcd(year % 100);
- M48_ADDR[MONTH] = to_bcd(month);
- M48_ADDR[DAY] = to_bcd(day);
- M48_ADDR[DAY_OF_WEEK] = day_of_week(year, month, day) + 1;
- M48_ADDR[HOUR] = to_bcd(hour);
- M48_ADDR[MINUTE] = to_bcd(minute);
- M48_ADDR[SECOND] = to_bcd(second);
-
- M48_ADDR[CONTROL] &= ~0x80; /* Clear WRITE bit */
-
- SYS_TOD_PROTECT();
-
- return 0;
-}
-
-/*
- * Note: the TOD should store the current GMT
- */
-
-int m48_tod_get(int *year, /* 1980-2079 */
- int *month, /* 01-12 */
- int *day, /* 01-31 */
- int *hour, /* 00-23 */
- int *minute, /* 00-59 */
- int *second) /* 00-59 */
-{
- int y;
-
- SYS_TOD_UNPROTECT();
-
- M48_ADDR[CONTROL] |= 0x40; /* Set READ bit */
-
- y = from_bcd(M48_ADDR[YEAR]);
- *year = y < 80 ? 2000 + y : 1900 + y;
- *month = from_bcd(M48_ADDR[MONTH]);
- *day = from_bcd(M48_ADDR[DAY]);
- /* day_of_week = M48_ADDR[DAY_OF_WEEK] & 0xf; */
- *hour = from_bcd(M48_ADDR[HOUR]);
- *minute = from_bcd(M48_ADDR[MINUTE]);
- *second = from_bcd(M48_ADDR[SECOND] & 0x7f);
-
- M48_ADDR[CONTROL] &= ~0x40; /* Clear READ bit */
-
- SYS_TOD_PROTECT();
-
- return 0;
-}
-
-int m48_tod_get_second(void)
-{
- return from_bcd(M48_ADDR[SECOND] & 0x7f);
-}
-
-/*
- * Watchdog function
- *
- * If usec is 0, the watchdog timer is disarmed.
- *
- * If usec is non-zero, the watchdog timer is armed (or re-armed) for
- * approximately usec microseconds (if the exact requested usec is
- * not supported by the chip, the next higher available value is used).
- *
- * Minimum watchdog timeout = 62500 usec
- * Maximum watchdog timeout = 124 sec (124000000 usec)
- */
-
-void m48_watchdog_arm(int usec)
-{
- int mpy, res;
-
- SYS_TOD_UNPROTECT();
-
- if (usec == 0) {
- res = 0;
- mpy = 0;
- } else if (usec < 2000000) { /* Resolution: 1/16s if below 2s */
- res = 0;
- mpy = (usec + 62499) / 62500;
- } else if (usec < 8000000) { /* Resolution: 1/4s if below 8s */
- res = 1;
- mpy = (usec + 249999) / 250000;
- } else if (usec < 32000000) { /* Resolution: 1s if below 32s */
- res = 2;
- mpy = (usec + 999999) / 1000000;
- } else { /* Resolution: 4s up to 124s */
- res = 3;
- mpy = (usec + 3999999) / 4000000;
- if (mpy > 31)
- mpy = 31;
- }
-
- M48_ADDR[WATCH] = (0x80 | /* Steer to RST signal (IRQ = N/C) */
- mpy << 2 |
- res);
-
- SYS_TOD_PROTECT();
-}
-
-/*
- * U-Boot RTC support.
- */
-int
-rtc_get( struct rtc_time *tmp )
-{
- m48_tod_get(&tmp->tm_year,
- &tmp->tm_mon,
- &tmp->tm_mday,
- &tmp->tm_hour,
- &tmp->tm_min,
- &tmp->tm_sec);
- tmp->tm_yday = 0;
- tmp->tm_isdst= 0;
-
-#ifdef RTC_DEBUG
- printf( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
-#endif
-
- return 0;
-}
-
-int rtc_set( struct rtc_time *tmp )
-{
- m48_tod_set(tmp->tm_year, /* 1980-2079 */
- tmp->tm_mon, /* 01-12 */
- tmp->tm_mday, /* 01-31 */
- tmp->tm_hour, /* 00-23 */
- tmp->tm_min, /* 00-59 */
- tmp->tm_sec); /* 00-59 */
-
-#ifdef RTC_DEBUG
- printf( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-#endif
-
- return 0;
-}
-
-void
-rtc_reset (void)
-{
- m48_tod_init();
-}
+++ /dev/null
-/*
- * SGS M48-T59Y TOD/NVRAM Driver
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp.
- *
- * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __M48_T59_Y_H
-#define __M48_T59_Y_H
-
-/*
- * M48 T59Y -Timekeeping Battery backed SRAM.
- */
-
-int m48_tod_init(void);
-
-int m48_tod_set(int year,
- int month,
- int day,
- int hour,
- int minute,
- int second);
-
-int m48_tod_get(int *year,
- int *month,
- int *day,
- int *hour,
- int *minute,
- int *second);
-
-int m48_tod_get_second(void);
-
-void m48_watchdog_arm(int usec);
-
-#endif /*!__M48_T59_Y_H */
+++ /dev/null
-/*
- * COM1 NS16550 support
- * originally from linux source (arch/powerpc/boot/ns16550.c)
- * modified to use CONFIG_SYS_ISA_MEM and new defines
- */
-
-#include <config.h>
-#include "ns16550.h"
-
-typedef struct NS16550 *NS16550_t;
-
-const NS16550_t COM_PORTS[] =
- { (NS16550_t) ((CONFIG_SYS_EUMB_ADDR) + 0x4500),
-(NS16550_t) ((CONFIG_SYS_EUMB_ADDR) + 0x4600) };
-
-volatile struct NS16550 *NS16550_init (int chan, int baud_divisor)
-{
- volatile struct NS16550 *com_port;
-
- com_port = (struct NS16550 *) COM_PORTS[chan];
- com_port->ier = 0x00;
- com_port->lcr = LCR_BKSE; /* Access baud rate */
- com_port->dll = baud_divisor & 0xff; /* 9600 baud */
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = LCR_8N1; /* 8 data, 1 stop, no parity */
- com_port->mcr = MCR_RTS; /* RTS/DTR */
- com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR; /* Clear & enable FIFOs */
- return (com_port);
-}
-
-void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor)
-{
- com_port->ier = 0x00;
- com_port->lcr = LCR_BKSE; /* Access baud rate */
- com_port->dll = baud_divisor & 0xff; /* 9600 baud */
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = LCR_8N1; /* 8 data, 1 stop, no parity */
- com_port->mcr = MCR_RTS; /* RTS/DTR */
- com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR; /* Clear & enable FIFOs */
-}
-
-void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c)
-{
- while ((com_port->lsr & LSR_THRE) == 0);
- com_port->thr = c;
-}
-
-unsigned char NS16550_getc (volatile struct NS16550 *com_port)
-{
- while ((com_port->lsr & LSR_DR) == 0);
- return (com_port->rbr);
-}
-
-int NS16550_tstc (volatile struct NS16550 *com_port)
-{
- return ((com_port->lsr & LSR_DR) != 0);
-}
+++ /dev/null
-/*
- * NS16550 Serial Port
- * originally from linux source (arch/powerpc/boot/ns16550.h)
- * modified slightly to
- * have addresses as offsets from CONFIG_SYS_ISA_BASE
- * added a few more definitions
- * added prototypes for ns16550.c
- * reduced no of com ports to 2
- * modifications (c) Rob Taylor, Flying Pig Systems. 2000.
- * further modified to support the 8245 duart
- * modifications (c) Paul Jimenez, Musenki, Inc. 2001.
- */
-
-
-struct NS16550 {
- unsigned char rbrthrdlb; /* 0 */
- unsigned char ierdmb; /* 1 */
- unsigned char iirfcrafr; /* 2 */
- unsigned char lcr; /* 3 */
- unsigned char mcr; /* 4 */
- unsigned char lsr; /* 5 */
- unsigned char msr; /* 6 */
- unsigned char scr; /* 7 */
- unsigned char reserved[2]; /* 8 & 9 */
- unsigned char dsr; /* 10 */
- unsigned char dcr; /* 11 */
-};
-
-
-#define rbr rbrthrdlb
-#define thr rbrthrdlb
-#define dll rbrthrdlb
-#define ier ierdmb
-#define dlm ierdmb
-#define iir iirfcrafr
-#define fcr iirfcrafr
-#define afr iirfcrafr
-
-#define FCR_FIFO_EN 0x01 /*fifo enable */
-#define FCR_RXSR 0x02 /*receiver soft reset */
-#define FCR_TXSR 0x04 /*transmitter soft reset */
-#define FCR_DMS 0x08 /* DMA Mode Select */
-
-#define MCR_RTS 0x02 /* Readyu to Send */
-#define MCR_LOOP 0x10 /* Local loopback mode enable */
-/* #define MCR_DTR 0x01 noton 8245 duart */
-/* #define MCR_DMA_EN 0x04 noton 8245 duart */
-/* #define MCR_TX_DFR 0x08 noton 8245 duart */
-
-#define LCR_WLS_MSK 0x03 /* character length slect mask */
-#define LCR_WLS_5 0x00 /* 5 bit character length */
-#define LCR_WLS_6 0x01 /* 6 bit character length */
-#define LCR_WLS_7 0x02 /* 7 bit character length */
-#define LCR_WLS_8 0x03 /* 8 bit character length */
-#define LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */
-#define LCR_PEN 0x08 /* Parity eneble */
-#define LCR_EPS 0x10 /* Even Parity Select */
-#define LCR_STKP 0x20 /* Stick Parity */
-#define LCR_SBRK 0x40 /* Set Break */
-#define LCR_BKSE 0x80 /* Bank select enable - aka DLAB on 8245 */
-
-#define LSR_DR 0x01 /* Data ready */
-#define LSR_OE 0x02 /* Overrun */
-#define LSR_PE 0x04 /* Parity error */
-#define LSR_FE 0x08 /* Framing error */
-#define LSR_BI 0x10 /* Break */
-#define LSR_THRE 0x20 /* Xmit holding register empty */
-#define LSR_TEMT 0x40 /* Xmitter empty */
-#define LSR_ERR 0x80 /* Error */
-
-/* useful defaults for LCR*/
-#define LCR_8N1 0x03
-
-
-volatile struct NS16550 *NS16550_init (int chan, int baud_divisor);
-void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c);
-unsigned char NS16550_getc (volatile struct NS16550 *com_port);
-int NS16550_tstc (volatile struct NS16550 *com_port);
-void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor);
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-#include "ns16550.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if CONFIG_CONS_INDEX == 1
-static struct NS16550 *console =
- (struct NS16550 *) (CONFIG_SYS_EUMB_ADDR + 0x4500);
-#elif CONFIG_CONS_INDEX == 2
-static struct NS16550 *console =
- (struct NS16550 *) (CONFIG_SYS_EUMB_ADDR + 0x4500);
-#else
-#error no valid console defined
-#endif
-
-extern ulong get_bus_freq (ulong);
-
-static int bmw_serial_init(void)
-{
- int clock_divisor = gd->bus_clk / 16 / gd->baudrate;
-
- NS16550_init (CONFIG_CONS_INDEX - 1, clock_divisor);
-
- return (0);
-}
-
-static void bmw_serial_putc(const char c)
-{
- if (c == '\n') {
- serial_putc ('\r');
- }
- NS16550_putc (console, c);
-}
-
-static void bmw_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-
-static int bmw_serial_getc(void)
-{
- return NS16550_getc (console);
-}
-
-static int bmw_serial_tstc(void)
-{
- return NS16550_tstc (console);
-}
-
-static void bmw_serial_setbrg(void)
-{
- int clock_divisor = get_bus_freq (0) / 16 / gd->baudrate;
-
- NS16550_reinit (console, clock_divisor);
-}
-
-static struct serial_device bmw_serial_drv = {
- .name = "bmw_serial",
- .start = bmw_serial_init,
- .stop = NULL,
- .setbrg = bmw_serial_setbrg,
- .putc = bmw_serial_putc,
- .puts = bmw_serial_puts,
- .getc = bmw_serial_getc,
- .tstc = bmw_serial_tstc,
-};
-
-void bmw_serial_initialize(void)
-{
- serial_register(&bmw_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &bmw_serial_drv;
-}
sorcery powerpc mpc8220
Yukon8220 powerpc mpc8220 alaska
A3000 powerpc mpc824x a3000
-BMW powerpc mpc824x bmw
CPC45 powerpc mpc824x cpc45 - - CPC45
CPC45_ROMBOOT powerpc mpc824x cpc45 - - CPC45:BOOT_ROM
CU824 powerpc mpc824x cu824
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- *
- * Configuration settings for the CU824 board.
- *
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC824X 1
-#define CONFIG_MPC8245 1
-#define CONFIG_BMW 1
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#define CONFIG_BOOTCOMMAND "bootm FF820000" /* autoboot command */
-#define CONFIG_BOOTDELAY 5
-
-#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Only use Onboard TSOP-16MB device */
-#define DOC_PASSIVE_PROBE 1
-#define CONFIG_SYS_DOC_SUPPORT_2000 1
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM 1
-#define CONFIG_SYS_DOC_SHORT_TIMEOUT 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_ELF
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-
-
-#if 0
-#define CONFIG_PCI 1
-#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=>" /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-/* Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_MAXARGS 8 /* Max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-#define CONFIG_SYS_FLASH_BASE0_PRELIM 0xFFF00000 /* FLASH bank on RCS#0 */
-#define CONFIG_SYS_FLASH_BASE1_PRELIM 0xFF800000 /* FLASH bank on RCS#1 */
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_FLASH_BANKS { CONFIG_SYS_FLASH_BASE0_PRELIM , CONFIG_SYS_FLASH_BASE1_PRELIM }
-
-/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
- * reset vector is actually located at FFB00100, but the 8245
- * takes care of us.
- */
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (2048 << 10) /* Reserve 2MB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
-
- /* Maximum amount of RAM.
- */
-#define CONFIG_SYS_MAX_RAM_SIZE 0x04000000 /* 0 .. 64 MB of (S)DRAM */
-
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#undef CONFIG_SYS_RAMBOOT
-#else
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MONITOR_LEN
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8240 user's manual.
- */
-
-#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_SYS_ETH_DEV_FN 0x7800
-#define CONFIG_SYS_ETH_IOBASE 0x00104000
-
- /* Bit-field values for MCCR1.
- */
-#define CONFIG_SYS_ROMNAL 0xf
-#define CONFIG_SYS_ROMFAL 0x1f
-#define CONFIG_SYS_DBUS_SIZE 0x3
-
- /* Bit-field values for MCCR2.
- */
-#define CONFIG_SYS_TSWAIT 0x5 /* Transaction Start Wait States timer */
-#define CONFIG_SYS_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */
-
- /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
- */
-#define CONFIG_SYS_BSTOPRE 0 /* FIXME: was 192 */
-
- /* Bit-field values for MCCR3.
- */
-#define CONFIG_SYS_REFREC 2 /* Refresh to activate interval */
-
- /* Bit-field values for MCCR4.
- */
-#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval FIXME: was 2 */
-#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval FIXME: was 5 */
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
-#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
-#define CONFIG_SYS_SDMODE_BURSTLEN 3 /* SDMODE Burst length */
-#define CONFIG_SYS_ACTORW 0xa /* FIXME was 2 */
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-
-#define CONFIG_SYS_PGMAX 0x0 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
-
-#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x3ff00000
-#define CONFIG_SYS_BANK1_END 0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE 0
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x3ff00000
-#define CONFIG_SYS_BANK4_END 0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x3ff00000
-#define CONFIG_SYS_BANK5_END 0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x3ff00000
-#define CONFIG_SYS_BANK6_END 0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x3ff00000
-#define CONFIG_SYS_BANK7_END 0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE 0
-
-#define CONFIG_SYS_ODCR 0xff
-
-#define CONFIG_PCI 1 /* Include PCI support */
-#undef CONFIG_PCI_PNP
-
-/* PCI Memory space(s) */
-#define PCI_MEM_SPACE1_START 0x80000000
-#define PCI_MEM_SPACE2_START 0xfd000000
-
-/* ROM Spaces */
-#include "../board/bmw/bmw.h"
-
-/* BAT configuration */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 0 /* Max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors per flash */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/*
- * Warining: environment is not EMBEDDED in the U-Boot code.
- * It's stored in flash separately.
- */
-#define CONFIG_ENV_IS_IN_NVRAM 1
-#define CONFIG_ENV_OVERWRITE 1
-#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE 1
-#define CONFIG_ENV_ADDR 0x7c004000 /* right at the start of NVRAM */
-#define CONFIG_ENV_SIZE 0x1ff0 /* Size of the Environment - 8K */
-#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */
-
-/*
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-#endif /* __CONFIG_H */
projects / karo-tx-uboot.git / commitdiff