]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
ppc4xx: Fix 440EPx bug in reconfigure_pll()
authorStefan Roese <sr@denx.de>
Thu, 26 Aug 2010 15:14:51 +0000 (17:14 +0200)
committerStefan Roese <sr@denx.de>
Fri, 3 Sep 2010 09:14:21 +0000 (11:14 +0200)
This patch fixes a bug in reconfigure_pll(), where the detection of
the current bootstrap option is wrong. The ICS bits where incorrectly
shifted. This bug was found on the lwmon5 board, which uses bootstrap
option H (I2C bootstrap EEPROM).

Additionally a bit of code was moved into the if statement, since its
only used after later on. No need to run this code all the time.

Also, a few empty lines are added to make the code better readable.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Rupjyoti Sarmah <rsarmah@amcc.com>
Cc: Victor Gallardo <vgallardo@appliedmicro.com>
arch/powerpc/cpu/ppc4xx/cpu_init.c
include/ppc440.h

index c04eede90da87385000f622e68887ae451d8640d..b31bd0bcc432b2a854534eecb227fec5fe9406a2 100644 (file)
@@ -142,22 +142,28 @@ void reconfigure_pll(u32 new_cpu_freq)
         * modify it.
         */
        if (temp == 1) {
-               mfcpr(CPR0_PLLD, reg);
-               /* Get current value of fbdv.  */
-               temp = (reg & PLLD_FBDV_MASK) >> 24;
-               fbdv = temp ? temp : 32;
-               /* Get current value of lfbdv. */
-               temp = (reg & PLLD_LFBDV_MASK);
-               lfbdv = temp ? temp : 64;
                /*
                 * Load register that contains current boot strapping option.
                 */
                mfcpr(CPR0_ICFG, reg);
-               /* Shift strapping option into low 3 bits.*/
-               reg = (reg >> 28);
+               /*
+                * Strapping option bits (ICS) are already in correct position,
+                * only masking needed.
+                */
+               reg &= CPR0_ICFG_ICS_MASK;
 
                if ((reg == BOOT_STRAP_OPTION_A) || (reg == BOOT_STRAP_OPTION_B) ||
                    (reg == BOOT_STRAP_OPTION_D) || (reg == BOOT_STRAP_OPTION_E)) {
+                       mfcpr(CPR0_PLLD, reg);
+
+                       /* Get current value of fbdv.  */
+                       temp = (reg & PLLD_FBDV_MASK) >> 24;
+                       fbdv = temp ? temp : 32;
+
+                       /* Get current value of lfbdv. */
+                       temp = (reg & PLLD_LFBDV_MASK);
+                       lfbdv = temp ? temp : 64;
+
                        /*
                         * Get current value of FWDVA. Assign current FWDVA to
                         * new FWDVB.
@@ -165,12 +171,14 @@ void reconfigure_pll(u32 new_cpu_freq)
                        mfcpr(CPR0_PLLD, reg);
                        target_fwdvb = (reg & PLLD_FWDVA_MASK) >> 16;
                        fwdvb = target_fwdvb ? target_fwdvb : 8;
+
                        /*
                         * Get current value of FWDVB. Assign current FWDVB to
                         * new FWDVA.
                         */
                        target_fwdva = (reg & PLLD_FWDVB_MASK) >> 8;
                        fwdva = target_fwdva ? target_fwdva : 16;
+
                        /*
                         * Update CPR0_PLLD with switched FWDVA and FWDVB.
                         */
@@ -181,6 +189,7 @@ void reconfigure_pll(u32 new_cpu_freq)
                                ((fbdv == 32 ? 0 : fbdv) << 24) |
                                (lfbdv == 64 ? 0 : lfbdv);
                        mtcpr(CPR0_PLLD, reg);
+
                        /* Acknowledge that a reset is required. */
                        reset_needed = 1;
                }
index c807dda2ae768117970d47e19212fce89b9b6684..67277539a4022f2fe047483032148460d8d511b7 100644 (file)
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define CPR0_ICFG_RLI_MASK     0x80000000
+#define CPR0_ICFG_ICS_MASK     0x00000007
 #define CPR0_SPCID_SPCIDV0_MASK        0x03000000
 #define CPR0_SPCID_SPCIDV0_DIV1        0x01000000
 #define CPR0_SPCID_SPCIDV0_DIV2        0x02000000