# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_AT91CAP9) += at91cap9_devices.o
obj-$(CONFIG_AT91SAM9260) += at91sam9260_devices.o
obj-$(CONFIG_AT91SAM9G20) += at91sam9260_devices.o
obj-$(CONFIG_AT91SAM9XE) += at91sam9260_devices.o
+++ /dev/null
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * (C) Copyright 2009
- * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
- * esd electronic system design gmbh <www.esd.eu>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_serial0_hw_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_a_periph(AT91_PIO_PORTA, 22, 1); /* TXD0 */
- at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* RXD0 */
- writel(1 << AT91CAP9_ID_US0, &pmc->pcer);
-}
-
-void at91_serial1_hw_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */
- at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* RXD1 */
- writel(1 << AT91CAP9_ID_US1, &pmc->pcer);
-}
-
-void at91_serial2_hw_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */
- at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* RXD2 */
- writel(1 << AT91CAP9_ID_US2, &pmc->pcer);
-}
-
-void at91_serial3_hw_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* DRXD */
- at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */
- writel(1 << AT91_ID_SYS, &pmc->pcer);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
- at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
- at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
- at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3 /* DBGU */
- at91_serial3_hw_init();
-#endif
-}
-
-#ifdef CONFIG_HAS_DATAFLASH
-void at91_spi0_hw_init(unsigned long cs_mask)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_b_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */
- at91_set_b_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */
- at91_set_b_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */
-
- /* Enable clock */
- writel(1 << AT91CAP9_ID_SPI0, &pmc->pcer);
-
- if (cs_mask & (1 << 0)) {
- at91_set_b_periph(AT91_PIO_PORTA, 5, 1);
- }
- if (cs_mask & (1 << 1)) {
- at91_set_b_periph(AT91_PIO_PORTA, 3, 1);
- }
- if (cs_mask & (1 << 2)) {
- at91_set_b_periph(AT91_PIO_PORTD, 0, 1);
- }
- if (cs_mask & (1 << 3)) {
- at91_set_b_periph(AT91_PIO_PORTD, 1, 1);
- }
- if (cs_mask & (1 << 4)) {
- at91_set_pio_output(AT91_PIO_PORTA, 5, 1);
- }
- if (cs_mask & (1 << 5)) {
- at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
- }
- if (cs_mask & (1 << 6)) {
- at91_set_pio_output(AT91_PIO_PORTD, 0, 1);
- }
- if (cs_mask & (1 << 7)) {
- at91_set_pio_output(AT91_PIO_PORTD, 1, 1);
- }
-}
-
-void at91_spi1_hw_init(unsigned long cs_mask)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* SPI1_MISO */
- at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* SPI1_MOSI */
- at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* SPI1_SPCK */
-
- /* Enable clock */
- writel(1 << AT91CAP9_ID_SPI1, &pmc->pcer);
-
- if (cs_mask & (1 << 0)) {
- at91_set_a_periph(AT91_PIO_PORTB, 15, 1);
- }
- if (cs_mask & (1 << 1)) {
- at91_set_a_periph(AT91_PIO_PORTB, 16, 1);
- }
- if (cs_mask & (1 << 2)) {
- at91_set_a_periph(AT91_PIO_PORTB, 17, 1);
- }
- if (cs_mask & (1 << 3)) {
- at91_set_a_periph(AT91_PIO_PORTB, 18, 1);
- }
- if (cs_mask & (1 << 4)) {
- at91_set_pio_output(AT91_PIO_PORTB, 15, 1);
- }
- if (cs_mask & (1 << 5)) {
- at91_set_pio_output(AT91_PIO_PORTB, 16, 1);
- }
- if (cs_mask & (1 << 6)) {
- at91_set_pio_output(AT91_PIO_PORTB, 17, 1);
- }
- if (cs_mask & (1 << 7)) {
- at91_set_pio_output(AT91_PIO_PORTB, 18, 1);
- }
-
-}
-#endif
-
-#ifdef CONFIG_MACB
-void at91_macb_hw_init(void)
-{
- at91_set_a_periph(AT91_PIO_PORTB, 21, 0); /* ETXCK_EREFCK */
- at91_set_a_periph(AT91_PIO_PORTB, 22, 0); /* ERXDV */
- at91_set_a_periph(AT91_PIO_PORTB, 25, 0); /* ERX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 26, 0); /* ERX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 27, 0); /* ERXER */
- at91_set_a_periph(AT91_PIO_PORTB, 28, 0); /* ETXEN */
- at91_set_a_periph(AT91_PIO_PORTB, 23, 0); /* ETX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 24, 0); /* ETX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* EMDIO */
- at91_set_a_periph(AT91_PIO_PORTB, 29, 0); /* EMDC */
-
-#ifndef CONFIG_RMII
- at91_set_b_periph(AT91_PIO_PORTC, 25, 0); /* ECRS */
- at91_set_b_periph(AT91_PIO_PORTC, 26, 0); /* ECOL */
- at91_set_b_periph(AT91_PIO_PORTC, 22, 0); /* ERX2 */
- at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* ERX3 */
- at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ERXCK */
- at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ETX2 */
- at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ETX3 */
- at91_set_b_periph(AT91_PIO_PORTC, 24, 0); /* ETXER */
-#endif
-}
-#endif
-
-#ifdef CONFIG_AT91_CAN
-void at91_can_hw_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* CAN_TX */
- at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* CAN_RX */
-
- /* Enable clock */
- writel(1 << AT91CAP9_ID_CAN, &pmc->pcer);
-}
-#endif
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
-#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
-#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x] */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
#define AT91RM9200_PMC_MDIV_2 (1 << 8)
#define AT91RM9200_PMC_MDIV_3 (2 << 8)
#define AT91RM9200_PMC_MDIV_4 (3 << 8)
-#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
+#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */
#define AT91SAM9_PMC_MDIV_2 (1 << 8)
#define AT91SAM9_PMC_MDIV_4 (2 << 8)
#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */
-#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */
+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
+++ /dev/null
-/*
- * [origin: Linux kernel include/asm-arm/arch-at91/at91cap9.h]
- *
- * Copyright (C) 2007 Stelian Pop <stelian@popies.net>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef AT91CAP9_H
-#define AT91CAP9_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
-#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
-#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
-#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
-#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
-#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
-#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
-#define AT91CAP9_ID_US0 8 /* USART 0 */
-#define AT91CAP9_ID_US1 9 /* USART 1 */
-#define AT91CAP9_ID_US2 10 /* USART 2 */
-#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
-#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
-#define AT91CAP9_ID_CAN 13 /* CAN */
-#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
-#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
-#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
-#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
-#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
-#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
-#define AT91CAP9_ID_EMAC 22 /* Ethernet */
-#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
-#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
-#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
-#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
-#define AT91CAP9_ID_DMA 27 /* DMA Controller */
-#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
-#define AT91CAP9_ID_UHP 29 /* USB Host Port */
-#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
-
-#define AT91_PIO_BASE 0xfffff200
-#define AT91_PMC_BASE 0xfffffc00
-#define AT91_RSTC_BASE 0xfffffd00
-#define AT91_PIT_BASE 0xfffffd30
-
-/*
- * Internal Memory.
- */
-#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
-#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
-
-#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
-
-#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */
-#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
-
-#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
-
-/*
- * Cpu Name
- */
-#define CONFIG_SYS_AT91_CPU_NAME "AT91CAP9"
-
-#endif
+++ /dev/null
-/*
- * [origin: Linux kernel include/asm-arm/arch-at91/at91cap9_matrix.h]
- *
- * Copyright (C) 2007 Stelian Pop <stelian@popies.net>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef AT91CAP9_MATRIX_H
-#define AT91CAP9_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
-#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
-#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
-#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
-#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
-#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
-#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
-#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
-#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
-#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
-#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-#define AT91_MATRIX_RCB6 (1 << 6)
-#define AT91_MATRIX_RCB7 (1 << 7)
-#define AT91_MATRIX_RCB8 (1 << 8)
-#define AT91_MATRIX_RCB9 (1 << 9)
-#define AT91_MATRIX_RCB10 (1 << 10)
-#define AT91_MATRIX_RCB11 (1 << 11)
-
-#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
-#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
-#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
-#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
-
-#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
-#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
-#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
-
-#endif
#include <asm/arch/at91sam9263_matrix.h>
#elif defined(CONFIG_AT91SAM9RL)
#include <asm/arch/at91sam9rl_matrix.h>
-#elif defined(CONFIG_AT91CAP9)
-#include <asm/arch/at91cap9_matrix.h>
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
#include <asm/arch/at91sam9g45_matrix.h>
#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
# include <asm/arch/at91sam9g45.h>
#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
# include <asm/arch/at91sam9x5.h>
-#elif defined(CONFIG_AT91CAP9)
-# include <asm/arch/at91cap9.h>
#elif defined(CONFIG_SAMA5D3)
# include <asm/arch/sama5d3.h>
#elif defined(CONFIG_SAMA5D4)
#define ATMEL_LCDC_GUARD_TIME 1
#endif
-#if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91CAP9)
+#if defined(CONFIG_AT91SAM9263)
#define ATMEL_LCDC_FIFO_SIZE 2048
#else
#define ATMEL_LCDC_FIFO_SIZE 512
projects / karo-tx-uboot.git / commitdiff